DOCSLIB.ORG

CONTACT BREAKER POINTS Daichi Brand OEM Replacements

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
CONTACT BREAKER POINTS Daichi Brand OEM Replacements GAUGES / BRUSHES / BREAKER POINT PLATES SHOP EQUIPMENT DAYTONA DIGITAL TACHOMETER CONTACT BREAKER POINT PLATE ASSEMBLIES This compact size tachometer indicates up to 19,990 RPM. Universal to both 2 and 4 strokes, and single to 8 cylinders. It memorizes the TOOLS highest RPM, and has a clock function. The body size is L 3”x W 1.4” x H .63. The window size is 1.3” x .6”. 22-1244 20-1482 20-1484 20-1483 HARD PARTS Made in Japan to O.E.M. specs. Available for the following models: 22-1244 Daytona Digital Tachometer HONDA KAWASAKI 20-1482 30200-300-154 20-1484 21135-011 CB750K/K1~K5 69-75 Z1/Z1A/Z1B-900 73-75 CB750K 76-78 KZ900A4/A5 76-77 CB750F Super Sport 75-78 KZ900B1 LTD 1976 WATER TEMPERATURE GAUGE KZ1000A1/A2 77-78 20-1483 30200-323-154 KZ1000B1/B2/B3 LTD 77-79 Note: Not for use in applications CB500/K1/K2 71-73 KZ1000C1/C2 Police 78-79 where maximum temperature CB550/K1/K 74-76 KZ1000D1 Z1R 1978 & FUEL CARB exceeds 212º F or 99.9º C. CB550F Super Sport 75-77 CB750A Automatic 76-78 CONTACT BREAKER POINTS Daichi brand OEM replacements. Made in Japan. Sold each. Note: Contact Breaker Point Application listed Next Page . CONTACT BREAKER POINTS X-REFERENCE IGNITION/ELECTRICAL Digital display gauge displays temperature up to 99.9º C (212º F.) Compact size mounts easily with velcro attachment. Made in Japan. HONDA 22-1128 Water Temperature Gauge K&L# MFG OEM # 22-1141 Water Temperature Sending unit only - for 22-1128 20-1460 Honda 30202-041-015 20-1461 Honda 30202-107-004 20-1481 Honda 30202-107-154 STARTER MOTOR & 20-1465 (RH) Honda 30203-286-004 RH Side ALTERNATOR BRUSHES 20-1466 (LH) Honda 30204-286-004 LH Side Manufactured in the USA. 20-1467 (RH) Honda 30203-292-003 RH Side Applications fit most Japanese 20-1468 (LH) Honda 30204-292-003 LH Side starter motors and alternators. 20-1469 (RH) Honda 30203-300-154 RH Side To order correct application, 20-1470 (LH) Honda 30204-300-154 LH Side measure your brush with vernier cali- CONTROL pers. Brushes must be soldered KAWASAKI to complete installation. K&L# MFG OEM # 20-5046 (LH) Kawasaki 21008-027 LH Side 1&4 P/N Dimensions 21-2951 20-5047 (RH) Kawasaki 21008-028 RH Side 2&3 21-2949 5mm x 10mm x 13mm, ea. 21-2951 6mm x 14mm x 12mm, ea. YAMAHA 21-2953 6.8mm x 11mm x 16.5mm, pr. K&L# MFG OEM # 20-1460 Yamaha 207-81321-90-00 20-1503 Yamaha 1M1-81321-20-00 21-2949 214-81321-20-00 SUSPENSION 20-5021 Yamaha 256-81621-11-00 20-1481 20-1465 20-1460 20-1461 ACCESSORIES 20-1469 20-1470 20-1467 20-1468 800.727.67671-800-727-6767 | kLsupply.com IGNITION / ELECTRICAL 289 CONTACT BREAKER POINTS CONTACT BREAKER POINTS Daichi brand OEM replacements. Made in Japan. Sold each. Note: Contact Breaker Point Reference chart listed at Page 289. 20-5046 20-1460 20-5047 TOOLS HONDA Application Year K&L No. SHOP EQUIPMENT ATC70 73-85 20-1460 XL70 74-76 20-1460 CL70/K1/K2/K3 69-73 20-1460 20-1503 20-5021 CT70-(K0) Trail 70 69-71 20-1460 CT70H/HK1 w/Hitachi ignition 70-73 20-1460 CT70K1~K4 Trail 70 72-75 20-1460 HONDA CT70 Trail 70 w/Hitachi ignition 76-82 20-1460 Application Year K&L No. XL75 77-79 20-1460 CB550F Super Sport 75-77 20-1469 (RH) XL80S 80-84 20-1460 20-1470 (LH) ATC90 with Toyo Ignition 76-78 20-1481 CB550K/K1/K 74-78 20-1469 (RH) HARD PARTS ATC90 with ND Ignition 70-78 20-1461 20-1470 (LH) CT90 68-79 20-1461 CB750A Automatic 76-78 20-1469 (RH) CT90 with Toyo Ignition 76-79 20-1481 20-1470 (LH) ST90 with ND ignition 73-75 20-1461 CB750F Super Sport 75-78 20-1469 (RH) CB/CL100/K1/K2 70-72 20-1461 20-1470 (LH) CL100S Scrambler 1973 20-1461 CB750K0/K1~K5/K 69-78 20-1469 (RH) SL100/K1/K2/K3 Moto Sport 70-73 20-1461 20-1470 (LH) XL100/K1 74-76 20-1461 GL1000 Goldwing 75-79 20-1467 (RH) XL100 with Toyo Ignition 76-78 20-1481 20-1468 (LH) ATC110 with Toyo Ignition 79-80 20-1481 GL1000L Goldwing LTD 1975 20-1467 (RH) CB125S 1978 20-1461 GL1000L Goldwing LTD 1975 20-1468 (LH) CARB & FUEL CARB CB125S/S1/S2/S 73-76 20-1461 CL125S/S1 Scrambler 73-74 20-1461 CB125S with Toyo Ignition 76-80 20-1481 KAWASAKI KZ400B1/B2 78-79 20-5046 CT125 1977 20-1461 KZ400C1 1978 20-5046 CT125 with Toyo Ignition 1977 20-1481 KZ400H1 LTD 1979 20-5046 SL125/K1/K2 Moto Sport 71-73 20-1461 KZ440A1 LTD 1980 20-5046 TL125S with Toyo Ignition 1976 20-1481 KZ440B1 1980 20-5046 XL125 with ND Ignition 74-78 20-1461 KZ440D1 LTD Belt 1980 20-5046 XL125 with Toyo Ignition 76-78 20-1481 KZ550A1 1980 20-5046 (LH) CB/CL175 with ND ignition 69-73 20-1461 20-5047 (RH) SL175 with ND ignition 70-71 20-1461 KZ650B1/B2/B2A/B3 77-79 20-5046 (LH) XL175 with ND Ignition 73-75 20-1461 20-5047 (RH) XL175 with Toyo Ignition 76-78 20-1481 IGNITION/ELECTRICAL KZ650C1/C2/C3 Custom 77-79 20-5046 (LH) CB200 with ND ignition 74-76 20-1461 20-5047 (RH) CB200T with Toyo Ignition 1976 20-1481 KZ650D1/D1A/D2 SR 78-79 20-5046 (LH) CL200 with ND ignition 1974 20-1461 20-5047 (RH) TL250 with Toyo Ignition 1976 20-1481 KZ650E1 LTD 1980 20-5046 (LH) XL250/K1/K2 Moto Sport with ND 72-76 20-1461 20-5047 (RH) XL250 with Toyo Ignition 1976 20-1481 KZ650F1 1980 20-5046 (LH) CB350G (2-cylinder) 1973 20-1465 (RH) 20-5047 (RH) 20-1466 (LH) KZ750B3/B4 (2-cylinder) 78-79 20-5046 CONTROL CB350K0/K1~K4 Super Sport 68-73 20-1465 (RH) KZ750G1 LTD (2-cylinder) 1980 20-5046 20-1466 (LH) Z1/A/B-900 73-75 20-5046 (LH) CL350K0/K1~K5 Scrambler 68-73 20-1465 (RH) 20-5047 (RH) 20-1466 (LH) KZ900A4/A5 76-77 20-5046 (LH) SL350/K1/K2 Moto Sport 70-72 20-1465 (RH) 20-5047 (RH) 20-1466 (LH) KZ900B1 LTD 1976 20-5046 (LH) XL350 with ND Ignition 74-78 20-1461 20-5047 (RH) XL350 with Toyo Ignition 76-78 20-1481 KZ1000A1/A2/A2A 77-78 20-5046 (LH) CB360/G 1974 20-1465 (RH) 20-5047 (RH) 20-1466 (LH) KZ1000B1/B2/B3 LTD 77-79 20-5046 (LH) CB360T 75-76 20-1465 (RH) 20-5047 (RH) 20-1466 (LH) SUSPENSION KZ1000C1/C1A/C2 78-79 20-5046 (LH) CJ360T 76-77 20-1465 (RH) 20-5047 (RH) 20-1466 (LH) KZ1000D1 Z1R 1978 20-5046 (LH) CL360/K1 Scrambler 74-75 20-1465 (RH) 20-5047 (RH) 20-1466 (LH) CB450K/K1~K7 Super Sport 65-74 20-1467 (RH) 20-1468 (LH) YAMAHA CL450K1~K7 Scrambler 68-74 20-1467 (RH) RD60/A/B 73-75 20-1460 20-1468 (LH) GT1/GT80/A/B/C/E/F 73-79 20-1460 CB500/K1/K2 71-73 20-1469 (RH) HT1/HT1B-90 70-71 20-1460 20-1470 (LH) LT2/LT3-100 Enduro 72-73 20-1460 20-1467 (RH) AT2/AT3-125 72-73 20-1460 ACCESSORIES CB500T 75-76 20-1468 (LH) CT1/1B/1C-175 Enduro 69-71 20-1460 800.727.6767290 IGNITION / ELECTRICAL 1-800-727-6767 | kLsupply.com BREAKER POINTS / CONDENSERS / CDI TYPE CONDENSERS SHOP EQUIPMENT YAMAHA CDI TYPE CONDENSERS OEM replacements. Made in Japan. Sold each. Application Year K&L No. TOOLS CT2/CT3-175 Enduro 72-73 20-1460 DT1/1B/1C-250 Enduro 68-70 20-1503 DT1S-250 Enduro 1969 20-1503 DT1E-250 Enduro 1971 20-1503 DT2/DT3-250 72-73 20-1503 DT250A/B/C/D/E 74-78 20-1503 RT1/1B/2/3-360 Enduro 70-73 20-1503 TX650/A 73-74 20-5021 XS650B/C/D/E/F/2F 75-79 20-5021 20-1537 20-1538 XS650SE/SF 78-79 20-5021 HARD PARTS XS1/XS1B/XS2-650 70-72 20-5021 TX750/A 73-74 20-5021 CONDENSERS OEM replacements. Made in Japan. Sold each. 20-1539 20-1540 HONDA K&L P/N OEM Reference 20-1477 30250-041-005 CT70-(K0) Trail 70 69-71 & FUEL CARB CT70 Trail 70 w/ Hitachi 76-82 CT70H/HK1 w/ Hitachi 70-73 20-1477 CT70K1~K4 Trail 70 72-75 XL70 74-76 20-1541 XL75 77-79 20-1542 XL80S 80-84 20-1471 20-1471 30280-371-000 GL1000 Goldwing 75-79 IGNITION/ELECTRICAL GL1000L Goldwing LTD 1976 20-1473 30250-300-154 CB500/K1/K2 71-73 CB550F Super Sport 75-77 20-1546 CB550K/K1 74-78 20-1473 CB750A Automatic 76-78 20-1545 CB750K0/K1~K5/K 69-78 CB750F Super Sport 75-78 HONDA KTM K&L P/N OEM Reference K&L P/N OEM Reference 20-1475 30280-292-672 20-1537 31700-MEN-A31 20-1546 77111035000 CB350G-(2-cylinder) 1973 CRF450R 2009 250SX-F 2011 CB350K0/K1~K4-(2-cylinder) 68-73 CL350K0/K1~K5 Scrambler 68-73 20-1538 31700-MEN-A41 SUZUKI CONTROL CRF250R 10-12 SL350/K1/K2 Moto Sport 69-73 20-1475 20-1545 33640-28H00 CRF450R 10-12 CB450K Super Sport 65-74 RM-Z450 08-12 CL450K1~K6 Scrambler 68-74 RM-Z250 10-12 CB500T 75-76 20-1539 31700-HP1-003 TRX450R 04-05 KAWASAKI YAMAHA 20-1501 21013-035 20-1540 31700-HP1-841 20-1541 33D-81965-00-00 Z1/A/B-900 73-75 TRX450R 06-09 YZ450F 10-12 KZ900A4/A5 76-77 KZ900B1 LTD 1976 20-1501 KAWASAKI SUSPENSION KZ1000A1/A2/A2A/D1 Z1R 77-78 20-1542 21013-0001 KZ1000B1/B2/B3 LTD 77-79 KX250 11-12 KZ1000C1/C1A/C2 78-79 KX450 09-12 20-1499 21013-037 TIMING LIGHT & ANALOG METER KZ550A1 1980 K&L has all the tools you need for checking those oldies but goodies KZ650B1/B2/B2A/B3 77-79 that we all get from time to time, here’s just a couple! KZ650C1/C2/C3 Custom 77-79 35-9565 KZ650D1/D1A/D2 SR 78-79 20-1499 Multimeter KZ650E1 LTD/F1 1980 YAMAHA ACCESSORIES 20-1492 256-81625-10-00 XS1/XS1B/XS2-650 70-72 35-6894 TX650/A 73-74 20-1492 XS650B/C/D/E/F/2F 75-79 Timing Light XS650SE/SF 78-79 800.727.67671-800-727-6767 | kLsupply.com IGNITION / ELECTRICAL 291.
Load more

Recommended publications
  • Ignition System
    IGNITION SYSTEM The ignition system of an internal combustion engine is an important part of the overall engine system. All conventional petrol[[1]] (gasoline)[[2]] engines require an ignition system. By contrast, not all engine types need an ignition system - for example, a diesel engine relies on compression-ignition, that is, the rise in temperature that accompanies the rise in pressure within the cylinder is sufficient to ignite the fuel spontaneously. How it helps It provides for the timely burning of the fuel mixture within the engine. How controlled The ignition system is usually switched on/off through a lock switch, operated with a key or code patch. Earlier history The earliest petrol engines used a very crude ignition system. This often took the form of a copper or brass rod which protruded into the cylinder, which was heated using an external source. The fuel would ignite when it came into contact with the rod. Naturally this was very inefficient as the fuel would not be ignited in a controlled manner. This type of arrangement was quickly superseded by spark-ignition, a system which is generally used to this day, albeit with sparks generated by more sophisticated circuitry. Glow plug ignition Glow plug ignition is used on some kinds of simple engines, such as those commonly used for model aircraft. A glow plug is a coil of wire (made from e.g. nichrome[[3]]) that will glow red hot when an electric current is passed through it. This ignites the fuel on contact, once the temperature of the fuel is already raised due to compression.
    [Show full text]
  • Owner's M Anua
    OWNER’S M ANUA Thank you for purchasing the HONDA GV400 vertical engine. If any trouble should develop with your unit, consult the dealer from whom you purchased it. i @ IWNOA MOTOR CO., LTD. iggo is!@ - _~- _ .___ _II tamw * To prevent fire hazards and to provide adequate ventilation, keep the engine at least 3 ft away from buildings and other equipment, during operation. Ir Do not place flammable objects, such as, gasoline, matches, etc., close to the engine while it is running. * Refuel in a well ventilated area with the engine stopped. Gasoline is flammable and explosive under certain conditions. * Do not smoke or allow flames or sparks where the engine is refueled or where gasoline is stored. * Do not overfill the tank. There should be no fuel in the filler neck. Make sure that the filler cap is closed securely. * If any fuel is spilled, make sure the area is dry before starting. * Operate the engine on a level surface to prevent fuel spillage. * This engine is not equipped with a spark arrester, and operation may be illegal in some areas. Check local laws and regulations before operation. * Exhaust contains poisonous carbon monoxide gas. Avoid inhalation of exhaust gases. Never run the engine in a closed garage or confined area. Every 100 operating Hrs. First 20 operating Hrs. I Every 20 operating Hrs. CHANGE ENGINE OIL . CLEAN AIR CLEANER . CHANGE ENGINE OIL l CLEAN SPARK PLUG AND CHECK GAP Breaker type CD1 type L 0.6 - 0.7 mm 0.9 - 1.0 mm ImaffKAwj *JE type 1 (0.024 - 0.027 in) (0.035 - 0.039 in) .C(LJ$Jji@ \/-- Cycle, valve arrangement 4Stroke, side valve * For replacement, use BMdA or l BPMdA or BPMRdA Displacement cm3 (cu in) 406 (28.1) BMRdA spark (NGK) plug WW Max.
    [Show full text]
  • Autosaver (PDF)
    P881-220840 EPA-AA-TBB-511-81-3 I EPA Evaluation of the Autoraver under Section 511 of the Motor Vehicle Information and Coat Saving8 Act Edward Anthony Barth May, 1981 Test and Evaluation Branch Emirrion Control Technology Division Office of Mobile Source Air Pollution Control Environmental Protection Agency -2- 6560-26 EPA-AA-TEB-511-81-3 ENVIRONMENTAL PROTECTION ACENCY [40 CFR Part 610) FUEL ECONOHYRETROFLT WVLCES Announcement of Fuel Economy Retrofit Device Evaluation for “Autosaver” AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Fuel Economy Retrofit Device Evaluation. s UMARY : This document annwnces the conclusions of the EPA evaluation of the “Autosaver” device under provisions of Section 511 of the Motor Vehicle Information and Cost Savings Act. -3- BACKGROUND LNFORMATZON: Section 511(b)(l) and’ Section 511(c) of the Motor Vehicle Information and Cost Savings Act (15 U.S.C. 2011(b)) requires that: 1 fi * (b)(l) “Upon application of any manufacturer of a retrofit device (or ’i . prototype thereof), upon the’ requast of the Federal Trade Commission I pursuant to subsection (a), or upon his own motion, the EPA Administrator shall evaluate, in accordance with rules prescribed under subsection (d), any retrofit device to determine whether the retrofit device increases fuel economy and to determine whether the <cpresentations (if any) made with respect to such retrofit devices are accurate.” (cl “The EPA Administrator shall publish in the Federal Register a summary of the results of all tests conducted under this section, together with the EPA Administrator’s conclusions as to - (1) the effect of any retrofit device on fuel ecor,orny; (2) the effect of any such device on emissions of air pollutants; and (3) any other information which the Admfnfstrator determines to be relevant in evaluatirg such device.” EPA publf shed final regulations establishing procedures for conducting fuel economy retrofit device evaluations on Elarch 23, 1979 144 FR 179461.
    [Show full text]
  • Bendix K Series Magnetos
    BENDIX K SERIES MAGNETOS SERVICE INSTRUCTIONS Scintilla Division, Bendix Aviation Corporation, Revised March 1956 DESCRIPTION The Bendix K series magnetos are high tension crankshaft magnetos designed for use on small one and two cylinder engines. They combine dependability with light weight and simplicity. The rotating magnet turns in close relation to a pair of laminated iron pole shoes, the outer ends of which carry the coil assembly. The pole shoes as well as the condenser are secured to a mounting flange which is a sturdy aluminum casting. Generally, the breaker incorporates a cam follower which is actuated directly by the engine crankshaft cam. However, on some single cylinder engines, the breaker is mounted remotely from the stator plate and magnet and a push rod is provided to actuate the breaker spring for separating the contact points. LUBRICATION On breaker assemblies incorporating a cam follower felt, apply one (1) drop of S.A.E. No. 60 oil to the cam follower felt when the magneto is installed and, after each 100 hours of operation, apply two (2) drops of S.A.E. No. 60 oil to the cam oiler felt. Blot off any excess oil with a clean cloth. Clean any excess grease from the cam. Inspect cam surface for rusting, pitting or scoring. All damaged cams should be replaced to reduce cam follower wear. Keep oil and grease away from the contact point surfaces. MAINTENANCE Ordinarily these magnetos will operate over extremely long periods of time without the need for adjustment or repair. However, if engine operating difficulties are experienced which appear to be caused by the ignition system, the magneto output should be checked to determine if this unit is functioning properly.
    [Show full text]
  • Simply Put, an Ignition System Activates a Fuel-Air Mixture to Create Energy
    Simply put, an ignition system activates a fuel-air mixture to create energy. The first ignition system to use an electric spark is thought to be Alessandro Volta’s toy electric pistol, ca. 1780. We’ve come a long way since that toy pistol! Today, the most commonly used ignition is the 4-stroke internal combustion system found in almost all vehicles, including your Air Cooled Volkswagen. In this newsletter, Mid America Motorworks takes a look at the evolution of the ignition system. Ignition – Why You Need A Spark Stroke 1: The piston’s Intake Valve opens to suck fuel and air In a 4-stroke internal combustion system, the spark is into the cylinder. where the magic happens. The spark ignites the air-fuel Stroke 2: The Intake Valve closes, capturing the fuel and air. mixture to create a burst of energy that moves your Beetle, The engine compresses the mixture, creating a large amount Bus, Ghia or Dune Buggy down the road. Just as the of potential energy. name implies, this happens in a sequence of 4 steps that • SPARK: When the piston reaches the top of the cylinder, continually repeat. the spark from the spark plug causes the mixture to explode. Camshaft Spark Plug Stroke 3: The explosion forces the piston back downward, Valve Spring releasing the potential energy as power. Cam Mixture In Stroke 4: The Exhaust Valve opens and the piston forces exhaust out of the cylinder. Exhaust Valve Cylinder Head Intake Valve Intake Valve Combustion Cooling Water Chamber Piston Cylinder Block Crankcase Connecting Rod Crankshaft Air Intake Compression Combustion Exhaust Emission The Main Components Distributor and thread farther into the engine’s combustion chamber.
    [Show full text]
  • Table of Contents 1 Battery
    Table of Contents 1 Battery................................................................................................................................................................................................................................1 1.1 Replacing Battery (Correct method).................................................................................................................................................................1 1.2 Replacing Battery (Alternate method)..............................................................................................................................................................1 1.3 Battery Spec.....................................................................................................................................................................................................1 1.4 See also............................................................................................................................................................................................................1 2 D-Jetronic...........................................................................................................................................................................................................................2 2.1 Issues...............................................................................................................................................................................................................2 2.2 See also............................................................................................................................................................................................................2
    [Show full text]
  • Symbols and Circuit Diagrams | Circuit Symbols
    500 | Symbols and circuit diagrams | Circuit symbols Symbols and circuit diagrams The electrical systems in vehicles contain Circuit symbols a wide array of electric and electronic devices for open and closed-loop engine- The circuit symbols shown in Table 1 are management systems as well as numer- a selection of the standardized circuit sym- ous comfort and convenience systems. bols relevant to automotive electrical sys- Only by using expressive symbols and tems. With a few exceptions, they conform circuit diagrams is it possible to provide to the standards of the International Elec- an overview of the complex circuits in trotechnical Commission (IEC). the vehicle’s electrical system. Circuit, The European Standard EN 60 617 schematic and terminal diagrams are a (Graphical Symbols for Electrical Circuit help during troubleshooting. They also Diagrams) corresponds to the interna- facilitate field installation of accessories, tional standard IEC 617. It exists in three and furnish support for trouble-free in- official versions (German, English and stallations and modifications on the French). The standard contains symbol vehicle’s electrical equipment. 1 Circuit diagram of an three-phase alternator with voltage regulator a WD+ B+ D+ wvu U D– DF B– b WB+D+ In addition to the symbol G for generator/alternator G, the circuit symbol also includes the symbols for the three 3 windings (phases) 3 U the star junction the diodes and the regulator U . B– Fig. 1 a With internal circuitry b Circuit symbols UAS0002-1E Robert Bosch GmbH (ed.), Bosch Automotive Electrics and Automotive Electronics, DOI 10.1007/978-3-658-01784-2, © Springer Fachmedien Wiesbaden 2014 Symbols and circuit diagrams | Circuit symbols | 501 elements, signs and, in particular, circuit cate the shapes and dimensions of the de- symbols for the following areas: vices they represent, nor do they show the General applications Part 2 locations of their terminal connections.
    [Show full text]
  • Internal Combustion Engines
    Lecture-16 Prepared under QIP-CD Cell Project Internal Combustion Engines Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1 Introduction The combustion in a spark ignition engine is initiated by an electrical discharge across the electrodes of a spark plug, which usually occurs from 100 to 300 before TDC depending upon the chamber geometry and operating conditions. The ignition system provides a spark of sufficient intensity to ignite the air-fuel mixture at the predetermined position in the engine cycle under all speeds and load conditions. 2 Introduction – contd. In a four-stroke, four cylinder engine operating at 3000 rpm, individual cylinders require a spark at every second revolution, and this necessitates the frequency of firing to be (3000/2) x 4 = 6000 sparks per minute or 100 sparks per second. This shows that there is an extremely short interval of time between firing impulses. 3 Introduction – contd. The internal combustion engines are not capable of starting by themselves. Engines fitted in trucks, tractors and other industrial applications are usually cranked by a small starting engine or by compressed air. Automotive engines are usually cranked by a small electric motor, which is better known as a starter motor, or simply a starter. The starter motor for SI and CI engines operates on the same principle as a direct current electric motor. 4 Ignition System -Requirements It should provide a good spark between the electrodes of the plugs at the correct timing The duration
    [Show full text]
  • Ignition System Types
    IGNITION SYSTEM TYPES Basically Convectional Ignition systems are of 2 types : (a) Battery or Coil Ignition System, and (b) Magneto Ignition System. Both these conventional, ignition systems work on mutual electromagnetic induction principle. Battery ignition system was generally used in 4-wheelers, but now-a-days it is more commonly used in 2-wheelers also (i.e. Button start, 2-wheelers like Pulsar, Kinetic Honda; Honda-Activa, Scooty, Fiero, etc.). In this case 6 V or 12 V batteries will supply necessary current in the primary winding. Magneto ignition system is mainly used in 2-wheelers, kick start engines. (Example, Bajaj Scooters, Boxer, Victor, Splendor, Passion, etc.). In this case magneto will produce and supply current to the primary winding. So in magneto ignition system magneto replaces the battery. Battery or Coil Ignition System Below figure shows line diagram of battery ignition system for a 4- cylinder petrol engine. It mainly consists of a 6 or 12 volt battery, ammeter, ignition switch, auto-transformer (step up transformer), contact breaker, capacitor, distributor rotor, distributor contact points, spark plugs, etc. Note that the Figure 4.1 shows the ignition system for 4-cylinder petrol engine, here there are 4-spark plugs and contact breaker cam has 4-corners. (If it is for 6-cylinder engine it will have 6-spark plugs and contact breaker cam will be a perfect hexagon). The ignition system is divided into 2-circuits : (i) Primary Circuit : It consists of 6 or 12 V battery, ammeter, ignition switch, primary winding it has 200-300 turns of 20 SWG (Sharps Wire Gauge) gauge wire, contact breaker, capacitor.
    [Show full text]
  • Service Instruction S.I
    Service Instruction S.I. No.: 89-5-1 ENGINE COMPONENTS, INC. Page: 1 of 5 Issued: 05/05/89 Title: ENGINE TROUBLE SHOOTING GUIDE Revision: 1 (09/01/01) Technical Portions of FAA DER Approved. FAILURE OF ENGINE TO START 27 points 14. Incorrectly adjusted carburetor control linkage 1. Lack of fuel 15. Fuel feed valve leaking or not operating properly 2. Ignition switch off 16. Warped or burned valves or valve seats 3. Under-priming or over-priming 17. Broken valve springs 4. Incorrect throttle setting 18. Worn or sticking pistons or cylinders 5. Cold oil 19. Cracked pistons or cylinders 6. Defective battery (battery ignition systems) 20. Bent pushrods 7. Dirty or defective spark plugs 21. Cylinder gaskets blown 8. Water in magneto 22. Magneto ground wire loose and grounding 9. Wet ignition harness 23. Carburetor icing 10. Wrong grade of fuel 24. Fluctuating fuel pressure 11. Spark advance retarded too far 25. Defective rocker arms or bearings 12. Vapor in fuel system 26. Defective valve guides 13. Water in carburetor 27. Bent crankshaft 14. Defective ignition wiring 28. Crosswind on propeller during ground operation 15. Booster magneto defective 29. Spark plug wires crossed 16. Incorrect valve and/or ignition timing 17. Defective magneto HIGH OIL TEMPERATURE 12 points 18. Broken impulse coupling 1. Insufficient oil supply 19. Magneto breaker points defective 2. Defective oil temperature gauge 20. Incorrect valve clearance 3. Airflow through oil cooler blocked 21. Defective priming system 4. Oil cooler bypass valve malfunction 22. Internal trouble in carburetor 5. Cylinder baffles missing or insecure 23.
    [Show full text]
  • Internal Combustion Engine (2161902)
    GOVERNMENT ENGINEERING COLLEGE, VALSAD MECHANICAL ENGINEERING DEPARTMENT CERTIFICATE This is to certify that Mr./Miss_____________________________________________________ of Mechanical Branch, Sem-VII, Enrollment No.__________________________, has satisfactorily completed his/her term work for the Internal Combustion Engine (2161902) during odd term-20____. Date : Sign of Faculty Head of the Department GOVERNMENT ENGINEERING COLLEGE, VALSAD MECHANICAL ENGINEERING DEPARTMENT INDEX Subject: Internal Combustion Engine (2161902) PRACTICAL SIGN OF TITLE GRADE DATE NO. FACULTY TO DETERMINE VALVE TIMINGS OF FOUR STROKES PETROL /DIESEL ENGINE & PORT 1 TIMING OF TWO STROKES PETROL/DIESEL ENGINE. TO STUDY ABOUT IGNITION SYSTEM OF I.C. 2 ENGINE. TO STUDY ABOUT SUPERCHARGING AND TURBO 3 CHARGING OF I.C.ENGINE. TO STUDY EXPERIMENTAL PRODUCER & DATA 4 CALCUTION FOR THE ENGINE. TO STUDY ABOUT ENGINE EMISSIONS AND THEIR 5 CONTROL. TO DETERMINE THE PERFORMANCE OF SINGLE 6 CYLINDER, FOUR STROKE, DIESEL ENGINE. TO DETERMINE THE PERFORMANCE OF FOUR 7 CYLINDER, FOUR STROKE, PETROL ENGINE. TO PERFORM MORSE TEST OF FOUR CYLINDERS, 8 FOUR STROKES, PETROL ENGINE WITH ELECTRICAL DYNAMOMETER. TO PERFORM WILLAN’S LINE METHOD FOR 9 DIESEL ENGINE. TO STUDY FUEL SUPPLY SYSTEM OF ENGINES. 10 GOVERNMENT ENGINEERING COLLEGE, VALSAD MECHANICAL ENGINEERING DEPARTMENT PRACTICAL 1: TO DETERMINE VALVE TIMINGS OF FOUR STROKES PETROL /DIESEL ENGINE & PORT TIMING OF TWO STROKES PETROL/DIESEL ENGINE. INTERNAL COMBUSTION ENGINE (2161902) B.E. SEM –6th OBJECTIVES: To understand the basic functional relation between cam and crank timing. To understand valve timing and port timing of engine. To determine valve timing diagram of four stroke engine and port timing diagram of two stroke. THEORY: INTRODUCTION Theoretically the inlet valve is opened during the suction stroke and the exhaust valve during the exhaust stroke.
    [Show full text]
  • Kit00060—Mkiv Ignition System for 6V Single & Twin Cylinder Motor Cycles Fitted with Dynamo Charging Systems
    BOYER BRANSDEN ELECTRONICS LTD Frindsbury House, Cox Street, Detling, Maidstone, Kent ME14 3HE. ENGLAND Telephone: 0044 (0)1622 730939 Fax: 0044 (0)1622 730930 Website: www.BoyerBransden.com Email: [email protected] KIT00060—MKIV IGNITION SYSTEM FOR 6V SINGLE & TWIN CYLINDER MOTOR CYCLES FITTED WITH DYNAMO CHARGING SYSTEMS WARNING This 6 volt system is not recommended for bikes running with alternators. Bikes fitted with alternator charging systems had no voltage regulation fitted, they relied on the battery to control the voltage. If the battery gets old/ faulty or disconnected when the engine is running, the voltage from the bikes rectifier will rise to high levels, enough to damage a retrofitted electronic ignition unit. This is not a problem on bikes fitted with dynamo generators as all dynamos use a dynamo regulator charge controller, fitted from the factory. If this system is fitted to a motorcycle with a 6v alternator a zener diode or some protection from overvoltage must be fitted as the warranty will not cover units damaged by excess voltage. Comprising:- a) Ignition Box (black box with wires) b) Stator Plate (round printed circuit board with two coils) c) Magnetic Rotor (round plated steel unit with two magnets) d) 1.25" x 0.25" BSF bolt e) 1.25" x 0.25" UNF bolt f) Plastic strap g) Coil link wire, black 1ft h) Coil positive earthing wire, red 1ft i) Terminals: 4 female spades, 1 male spade, 2 male bullets & 1 ring j) Black/white and black/yellow stator wiring 1m General fitting instructions WARNING THIS UNIT CAN PRODUCE HIGH VOLTAGES ALWAYS TURN OFF BEFORE WORKING ON THE SYSTEM.
    [Show full text]