1932-76 Lincoln-Mercury Catalog Automotive Thermal Acoustic Insulation
Total Page:16
File Type:pdf, Size:1020Kb
1932-76 Lincoln-Mercury Catalog Automotive Thermal Acoustic Insulation Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat •Reduce Road Noise •Reduce Exhaust Harmonics Pre-Cut Ready to Install Kits •Eliminate Mechanical Noise •Stop Body Panel Vibration Year • Make • Model Specific •Reduce Radiated & Reflected Heat •Stop Audio System Vibration The Coolest Cars Have QuietRIDE Inside! ™ Roof Kit Roof & Quarter Panels Kits are available for these Vehicles above beltline. Kits are available for these Vehicles See AcoustiTrunk Catalog See AcoustiHood Catalog Trunk Floor Kit Trunk Floor & Tire Well Firewall Insulator Fits under dash against the firewall bulkhead. Body Panel Kit All Panels below the beltline including Package Tray, Seat Divider, Rear Wheel Wells, Fenders, Rear Quarters and Tail Panels Door Kit All Doors Floor Kit Cowl Kit Front Floor, Rear Floor, Transmission Hump/ Panels between the Driveline firewall and front door of the vehicle. Everything in One Box to Do the Job Right! Pre-Cut, Ready To install Kits are Year, Make and Model Specific and include: •Dynamat Xtreme •Heat Shield Barrier Insulation Order Line: 888-777-3410 Tech Line: 209-942-4777 •Spray Adhesive •Seam Tape Fax: 877-720-2360 •Illustrated Instructions 1122 S. Wilson Way Ste. #1, Stockton CA, 95205 For more information contact us at: [email protected] ©2003-21 •Prices Subject to Change Without Notice Lincoln 1932-76 Mercury 1939-72 Automotive Thermal Acoustic Insulation Pre Cut Kits Ready to Install Roof to Road Solutions To Control Passenger Cabin Noise, Vibration and Heat Introducing a multi-stage, automotive insula- tion and sound damping system to give Lin- coln and Mercury cars the “quiet riding comfort” found in today’s new cars. AcoustiSHIELD kits are designed on current “state-of-the-art” auto acoustic technol-ogy, to insulate and control the noise, vibration and heat in the passenger cabin. Kits are pre-cut and come with easy-to- follow installation instructions. Everything you need to do the job right. Turn Your Lincoln or Mercury Car into “Quiet Riding Comfort” Stage 1 Stage 2 Sound Damper Pads Heat Absorber/Barrier Panels The first stage consists of pre-trimmed, self-adhesive, Sound The second stage uses a high-tech absorber/barrier material, Damper Pads, bonded to strategically located trouble spots on bonded to the body panels, to both sound deaden and insulate the floor pan and roof of the vehicle to control body panel vibra- the vehicle from radiant heat penetration from the engine and tion and noise. These spots are mapped and labeled in detailed road. Each absorber panel is cut to the correct shape and con- instructions which are included in the kit. tour and is mapped and labeled in the detailed instructions. Kits Include: • Stage 1 Pre-Sized Sound Damper Pads • Stage 2 Pre-Trimmed Heat Absorber / Barrier Panels, Spray Adhesive and Sealing Tape • Complete Illustrated Installation Instruction Dealer program available. For more information contact us at [email protected] ©2003-21 Quiet Ride Solutions Prices Subject to Change Without Notice Quiet Ride Solutions is the only source for authentic “Chicken Track Grain” Found on Early Ford Cars Firewall Insulators and other interior panels 1928 through 1948 FOMOCO cars and trucks used a ABS Firewall Cover unique “chicken track” texture on Chicken Track Grain Material their firewall insulator covers and related products from 1928 through 1948. Quiet Ride has faithfully reproduced this famous texture and offers it exclusively on its ABS molded firewall insulators and truck headliners, cowl and door panels. Each insulator product is molded with an ABS material and ready- to-install with Heat Shield Thermal Each insulator product is Barrier insulation, factory stock molded from an “out of the car” accessory holes and mounting pin original firewall for contour and locations punched. accuracy. Year-Make-Model Specific. Ford style steel mounting pins are not included but are available for separate purchase as needed. Firewall Insulators can be ordered without holes for custom applications. Mounting Pins and Clips American Cars and Trucks used a wide variety of mounting pins, clips, buttons and screws to attach the firewall insulator to the interior of the steel firewall bulkhead. Clean up and reuse your original mounting pins if you have them. We offer the following mounting pins and information based on what we have been able to find available. UMPS-10 Universal Mounting Pins If your original firewall mounting pins are missing or 20 damaged beyond repair, these universal pins may be a solution. They are a plastic “Christmas tree” type pin with a 1/2” button “head” that will fit most 5/16 inch holes. Kit includes 10 pins. UWC-MPL-10 Universal Wire Cap Mounting Pin--LongA variety of car and truck 10 manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Long shank (1/2 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit 10 pins. UWC-MPS-10 Universal Wire Cap Mounting Pin--Short 10 A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Short shank (1/4 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins. UPPS-20 Universal Upholstery Panel Pin Set 30 If your original upholstery panel mounting pins are missing or dam- aged beyond repair, these universal pins may be a solution. They are a short-shank plastic “Christmas tree” type pin with a 1/2 inch “head” that will fit 5/16 inch holes. Kit includes 10 pins. FORD 3541- Early Ford Firewall Mounting Pins--Long These all steel firewall mounting pins 3 MPL are an exact reproduction of the originals. They are in a 3/4 inch in length. The Long pin works best in the 1935-41 cars and may be used on cars through the mid-fiftys. FORD 3541- Early Ford Firewall Mounting Pin--Short These all steel firewall mounting pins 3 MPS are an exact reproduction of the originals. They are in a 1/2 inch in length. The short pins work best for the 1942-48 Ford cars and 1940-47 Ford trucks and may be used on trucks through the mid-fiftys. FORD RB-MP Late Model Ford Firewall Mounting Pins--Rubber Bullet Style 3 These all Rubber Bullet Style Ford mounting pins were used on FOMOCO products starting in 1969. These are an exact reproduction of the original. GM 5500-MP GM Firewall Plastic Firewall Mounting Plugs 3 General Motors started using a plastic firewall mounting plug to attach the insula- tor to the steel firewall bulkhead in 1955 for trucks and 1957 for cars. These plugs are still used in many GM vehicles today. SRMP-9 Street Rod Mounting Pin Kit With this new mounting pin kit, you can smooth your 34 firewall by welding closed the firewall mounting holes and install any of our insulator panels for that “smoothie look.” This kit will give you the option to place the firewall mounting pins where they will fit your application best. Be sure to order your firewall insulator “No Holes” when you place your order. Kit Includes 9 pinsets and instructions. R-83-56 Early and Mid-Year 1932 Ford 14.95 Correct insulator panel to dash mounting screws for early and mid-year 1932 passenger car, wagon and sedan delivery. Per Ford Engineering release docu- ments, the correct slotted flat head screws (1/4-20 x 1 3/16), locks, hex nuts and cup washers. Finished in black oxide. Kit includes 12 Sets (48 pieces.) Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com. R-07-01 Ford Original Shoulder Bolts for mid-to-late 1932 through 1935 5.95 Cars/Trucks Ford special slotted truss head shoulder screw, painted in Ford S-2 finish. Period correct insulator panel to dash Truss head/Shoulder mounting bolts for mid-to-late 1932-35 car, wagon and sedan delivery. Per Ford Engineering release docu- ments. Kit includes one Shoulder screw, 1/4 lock and 1/4-20 hex nut. FYI: 12 required for 1932 Vehicles and 14 required for 1933-35 vehicles. Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com. Mercury Pre-Cut and Ready to Install Kits Product Application Codes and Price Sheet 1939-40 Mercury Cars MERC 4148-FSTK 1941-1948 Mercury MERCor Sedan Trunk Floor Insula- 131 tion Kit Part # Description MSRP ASU-DDBIK-2 Universal 2 Door Damper Kit 128 MERC 3900-C 1939 Mercury Firewall Insulator Panel Panel 298 MERC 3940-CTPK 1939-40 Mercury Coupe Trunk Panel Kit 149 Other Parts For 1941-48 Mercury vehicles (Sold Separately) MERC 4000-STPL 1940 Mercury Sedan Trunk Panel Kit 149 Part # Description MSRP MERC 4000-C 1940 Mercury Firewall Insulator Panel 298 MERC 4150-C 1941 Mercury Deluxe Firewall 298 ASU-DDBIK-2 Universal 2 Door Damper Kit 65 MERC 4148-CPT 1941-48 Mercury Coupe Package Tray 165 MERC 4148-SPT 1941-48 Mercury Sedan Package Tray 165 1941-48 Mercury Cars MERC 4248-C 1942-1948 Ford/Mercury Firewall 235 1941-48 Mercury 5 Window Coupe MERC 4248-CSP 1942-1948 Mercury Cowl Panel Set 118 MERC 4148-CAK5W 1941-1948 Mercury 5W Coupe 805 BIT 4148SBF-C1 1941-1948 Bitchin Ford Car Sml. Block Firewall 249 Complete Acoustic Insulation Kit BIT 4148BBF-C4 1941-1948 Bitchin Ford Car Big Block Firewall 4” Setbk 249 MERC 4148-CBPK 1941-1948 Mercury Coupe Body Panel Insulation Kit 146 DS 4148SBF-C2 1941-1948 Direct Shtmetal Ford Car Sml. Block Firewall 2” Setbk 249 MERC 4148-CCK 1941-1948 Mercury Coupe Cowl Insulation Kit 101 DS 4148SBF-C2 1941-1948 Direct Shtmetal Ford Car Sml.