Tukan Kangaroo 750 / 1500 / 3000

TUKAN KANGAROO 750 / 1500 / 3000

PRODUCT RANGE TUKAN KANGAROO

THE TUKAN KANGAROO: PRODUCT RANGE.

PRODUCT RANGE

Cranes of the TUKAN KANGAROO series are Hook 4-rope multi- 2-section special cranes for high-performance handling of traverse section grab motor-driven grab bulk goods with all types of grab, but may also be used for general cargo handling with load hooks and special load attachment equipment such as e.g. coil tongs, as well as for container Load magnet Telescopic Grab handling by means of spreaders. spreader slewing device Typical of the Tukan Kangaroo crane design is the large-diameter tubular column and large rol- ler bearing used for the slew bearing, as well as the integrated bunker with transfer stations and O all the necessary equipment for onward convey- Load attachment equipment (examples) ing of the goods.

O The Tukan Kangaroo from Ardelt unloading a ship

Page 2 TUKAN KANGAROO

THE TUKAN KANGAROO: PRODUCT RANGE.

Tukan Kangaroo 750 The Tukan Kangaroo 750 is designed chiefly for the handling of goods in inland ports. With an outreach of 27 m, and with the normal gantry gauge of 8.5 m and a distance of approx. 3.0 m between waterside rail and fender, it is capable of loading and unloading without problem all ships up to Category V that operate on inland waterways. It is also possible to serve seagoing vessels as well as bulk carriers up to 16,000 dwt in an efficient manner.

Tukan Kangaroo 1500 The Tukan Kangaroo 1500 is a crane built for sea ports. It is equipped with jib systems that allow a max. outreach of 35, 40, or 45 m to be attained. With this, its application range for bulk goods ships of the Handysize extends up to Handymax Class (in the 35 m variants) and up to ships of Post Panama Class (with the 45 m system).

Grande Tukan The Grande Tukan 3000, which represents the largest version of the Kangaroo 3000 series, is offered with jib systems that provide max. outreaches of 50 and 55 m. With assumed nominal gantry gauges of 15 m and 18 m, this provides effective outreaches over fender of 34.0 and 37.5 m. In bulk goods operation, this allows ships up to Capesize class (47 m wide) to be served, as well as Japanmax special ships (50 m wide).

All cranes of the Tukan Kangaroo series are distinguished by their environmentally-friendly concept and very low operating costs.

Page 3 TUKAN KANGAROO

LIFTING CAPACITIES: TUKAN KANGAROO 750 WITH 27 M OUTREACH.

AVERAGE PERFORMANCE WITH 16 T GRAB HOISTING GEAR Q 600 t/h for coal of density = 1.0 t/m3

WORKING SPEEDS Q Lifting with full grab: 90 m/min Q Lifting with empty grab: 120 m/min Q Luffing with full grab: 75 m/min Q Luffing with empty grab: 90 m/min 27000 Q Slewing: 0.8 rpm to 1.2 rpm Q Crane travel speed: 20 m/min

General cargo 30 Heavy-lift stage handling 20 Bulk goods handling 10 8500 Lifting capacity (t) 27 2522 19 16 13 10 6,5 Outreach (m)

Bulk goods handling Container handling

6 rows = 14.4 m

Ship width = 12.6 m

(Slewable part of Tukan Kangaroo on standard gantry)

Page 4 TUKAN KANGAROO

LIFTING CAPACITIES: TUKAN KANGAROO 1500 WITH 35 M OUTREACH.

AVERAGE PERFORMANCE WITH 25 T GRAB HOISTING GEAR Q 800 t/h for coal of density = 1.0 t/m3

WORKING SPEEDS 35000 Q Lifting with full grab: 90 m/min Q Lifting with empty grab: 120 m/min Q Luffing with full grab: 75 m/min Q Luffing with empty grab: 90 m/min Q Slewing: 0.8 rpm to 1.2 rpm Q Crane travel speed: 20 m/min

General cargo Heavy-lift stage handling 40 Bulk goods handling 30 20 10 10000 Lifting capacity (t)

53025191610323 28 22 13 7 Outreach (m)

Bulk goods handling Container handling

8 rows = 19.2 m

Ship width = 30 m (Slewable part of Tukan Kangaroo on standard gantry)

Page 5 TUKAN KANGAROO

LIFTING CAPACITIES: TUKAN KANGAROO 1500 WITH 40 M OUTREACH.

AVERAGE PERFORMANCE WITH 40 T GRAB HOISTING GEAR Q 1250 t/h for coal of density = 1.0 t/m3

40000 WORKING SPEEDS Q Lifting with full grab: 90 m/min Q Lifting with empty grab: 120 m/min Q Luffing with full grab: 75 m/min Q Luffing with empty grab: 90 m/min Q Slewing: 0.8 rpm to 1.2 rpm Q Crane travel speed: 20 m/min

70 60 Heavy-lift stage General cargo handling 50 Bulk goods handling 40 30 20 Lifting capacity (t) 10 10000

40 3235 30 26 20 15 10 7 Outreach (m)

Bulk goods handling Container handling

10 rows = 24 m

Ship width = 32.3 m (Slewable part of Tukan Kangaroo on standard gantry)

Page 6 TUKAN KANGAROO

LIFTING CAPACITIES: TUKAN KANGAROO 1500 WITH 45 M OUTREACH.

AVERAGE PERFORMANCE WITH 32 T GRAB HOISTING GEAR Q 1000 t/h for coal of density = 1.0 t/m3

WORKING SPEEDS Q Lifting with full grab: 90 m/min Q Lifting with empty grab: 120 m/min Q Luffing with full grab: 75 m/min Q Luffing with empty grab: 90 m/min Q Slewing: 0.8 rpm to 1.2 rpm Q Crane travel speed: 20 m/min

Heavy-lift stage General cargo handling 50 Bulk goods handling 40 30

Lifting capacity (t) 10 15000

452520151040 36 29 7 Outreach (m)

45000

Bulk goods handling Container handling

13 rows1 = 31.2 m

Ship width = 38 m (Slewable part of Tukan Kangaroo on standard gantry)

Page 7 TUKAN KANGAROO

LIFTING CAPACITIES: GRANDE TUKAN KANGAROO 3000 WITH 50 M OUTREACH.

AVERAGE PERFORMANCE WITH 50 T GRAB HOISTING GEAR Q 1500 t/h for coal of density = 1.0 t/m3

70 Heavy-lift stage General cargo handling 60 Bulk goods handling 50 40

30 20 Lifting capacity (t) 10 18000

502520159,545 40 35 32 Outreach (m)

50000

Bulk goods handling Container handling

16 rows = 38.4 m

Ship width = 50 m

(Slewable part of Tukan Kangaroo on standard gantry)

Page 8 TUKAN KANGAROO

LIFTING CAPACITIES: GRANDE TUKAN KANGAROO 3000 WITH 55 M OUTREACH.

AVERAGE PERFORMANCE WITH 63 T GRAB HOISTING GEAR Q 1750 t/h for coal of density = 1.0 t/m3

Heavy-lift stage General cargo handling 80

70 Bulk goods handling 60 50 40

30 Lifting capacity (t) 20 10 18000

552520159,550 4044 35 30 Outreach (m)

55000

Bulk goods handling Container handling

16 rows = 38.4 m

S Ship width = 50 m

(Slewable part of Tukan Kangaroo on standard gantry)

Page 9 TUKAN KANGAROO

OUTREACH / EFFECTIVE WORKING RANGE: RELATIVE TO GANTRY GAUGE AND FENDER DISTANCE.

For the standard Tukan Kangaroo series, the following data form the basis for determination of the ship sizes that can be served:

Q CRANE TYPE Q MAX. Q NOMINAL Q MIN. DISTANCE Q MIN. DISTANCE Q MAX. OUTREACH TUKAN KANGAROO/ OUTREACH GANTRY RAIL-FENDER CENTRE-FENDER ÜBER FENDER GRANDE TUKAN (a) GAUGE (s) (f) (x) = s/2 + f (y) KANGAROO

m m m m m 750 - 27 27 8.5 3.0 10.5 16.5 1500 - 35 35 10 4.0 12.5 22.5 1500 - 40 40 12 4.0 13.0 27.0 1500 - 45 45 15 4.0 14.0 31.0 3000 - 50 50 15 4.5 16.0 34.0 3000 - 55 55 18 6.0 17.0 38.0

O Outreach/effective working range

Page 10 TUKAN KANGAROO

BULK GOODS HANDLING: SHIP SIZES AND CRANE TYPES.

CORRESPONDENCE TO THE BULK CARRIERS

Q SHIP SIZES DWT Q SHIP Q HATCH WIDTH Q REQUIRED Q CRANE TYPE WIDTH (APPROX. 0.45 OUTREACH OVER TUKAN KANGAROO / (b) X WIDTH) (L) FENDER (y1) GRANDE TUKAN KANGAROO Inland water ship Category V 11.4 11.4 11.0 750 - 27 Saimax 2,000 - 4,000 12.6 5.7 9.1 750 - 27 Bulk Carrier 16,000 21.8 9.8 15.8 750 - 27 Handysize 15,000 - 35,000 27.0 12.1 19.5 1500 - 35 Seawaymax 40,000 - 50,000 24.0 10.8 17.4 1500 - 35 Handymax 50,000 - 60,000 30.0 13.5 21.8 1500 - 35 Panamax 60,000 - 75,000 32.3 14.5 23.4 1500 - 40 Post-Panamax 75,000 - 85,000 38.0 17.1 27.6 1500 - 45 Capesize 140,000 - 160,000 47.0 21.2 34.1 3000 - 50 Japanmax 80,000 - 85,000 50.0 22.5 36.3 3000 - 55

O Bulk goods handling

Page 11 TUKAN KANGAROO

CONTAINER HANDLING: SHIP SIZES AND CRANE TYPES.

CORRESPONDENCE TO THE CONTAINER SHIPS

Q NO. OF ROWS Q CONTAINER WIDTH Q STACK WIDTH Q CRANE TYP TUKAN (sb) KANGAROO / GRANDE TUKAN KANGAROO 1st Generation 6 2.4 14.4 750 - 27 1st Generation 8 2.4 19.2 1500 - 35 2nd Generation 10 2.4 24.0 1500 - 40 3rd Generation (Panamax) 13 2.4 31.2 1500 - 45 3rd Generation (Panamax) 13 2.4 31.2 3000 - 50 4th Generation (Post-Panamax) 16 2.4 38.4 3000 - 55

O Container handling (Slewable part of Tukan Kangaroo on standard gantry)

Page 12 TUKAN KANGAROO

DRIVES ON THE TUKAN KANGAROO SERIES: HOISTING GEAR.

HOISTING GEAR PARAMETERS

Q CRANE TYP Q750 - 27 Q 1500 - 35 Q 1500 - 40 Q1500 - 45 Q3000 - 50 Q3000 - 55 TUKAN KANGAROO / GRANDE TUKAN KANGAROO Outreach m 27 35 40 45 50 55 Grab nominal lifting capacity t 16 / 20 25 / 32 40 / 50 32 / 40 40 / 50 50 / 63 General cargo t 25 40 63 50 63 80 Number of gearboxes No. 2 2 2 2 2 2 Hoisting speed, full load m/min 0 - 90 0 - 90 0 - 90 0 - 90 0 - 90 0 - 90 Hoisting speed, empty m/min 0 - 120 0 - 120 0 - 120 0 - 120 0 - 120 0 - 120

The hoisting gear systems are equipped as standard with compact, high-performance planetary gearboxes of modular design. This results in savings with regard to weight and costs.

O Hoisting gear

Page 13 TUKAN KANGAROO

DRIVES ON THE TUKAN KANGAROO SERIES: LUFFING GEAR.

LUFFING GEAR PARAMETERS

Q CRANE TYP Q 750 - 27 Q 1500 - 35 Q 1500 - 40 Q 1500 - 45 Q 3000 - 50 Q 3000 - 55 TUKAN KANGAROO / GRANDE TUKAN KANGAROO Outreach m 27 35 40 45 50 55 Grab nominal lifting capacity t 16 / 20 25 / 32 40 / 50 32 / 40 40 / 50 50 / 63 Number of gearboxes No. 1 1 2 2 2 2 Luffing speed, full load m/min 75 75 75 75 75 75 Luffing speed, empty m/min 90 90 90 90 90 90

The luffing gear is configured as a single toothed rack or double toothed rack luffing gear mechanism, depending on the size class. With this design, much lower operating costs can be achieved in comparison to hydraulic- and spindle-type luffing gear systems.

O Luffing gear

Page 14 TUKAN KANGAROO

DRIVES ON THE TUKAN KANGAROO SERIES: SLEWING GEAR.

SLEWING GEAR PARAMETERS

Q CRANE TYP Q 750 - 27 Q 1500 - 35 Q 1500 - 40 Q 1500 - 45 Q 3000 - 50 Q 3000 - 55 TUKAN KANGAROO / GRANDE TUKAN KANGAROO Outreach m 27 35 40 45 50 55 Grab nominal lifting capacity t 16 / 20 25 / 32 40 / 50 32 / 40 40 / 50 50 / 63 Number of gearboxes No. 2 2 2 2 2 3 Slewing speed U/min 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2

The Tukan slewing gear systems are compact, low-maintenance drive units equipped with a planetary gearbox. Because the slew bearing is secured with Superbolt fasteners, this prevents any uncontrolled loads from being imposed on the bolts.

O Slewing gear

Page 15 TUKAN KANGAROO

DRIVES ON THE TUKAN KANGAROO SERIES: TRAVELLING GEAR.

The travelling gear units are individually configured to meet the technical requirements (wheel loads, track loads, corner loads, rail type, etc.) using the modular construction system. Preferably, the centre drive system is used with running wheel size D. 630 mm. Individual wheel drives and larger running wheels are also available, if required.

O 8-wheel standard travelling gear FW 630; versions with centre drive or direct drive are available.

O 12-wheel standard travelling gear FW 630; versions with centre drive or direct drive are available.

Page 16 TUKAN KANGAROO

KRANUNION. WORLD MARKET LEADERS UNITED.

The Kranunion is an association of three crane manufacturers who have specialised in the lifting and transporting of heavy loads:

KIROW is the world market leader for railway cranes and slag transporters ARDELT is the world market leader for articulated jib cranes KOCKS is the world market leader for Goliath cranes

At the centre of all Kranunion products are the technical concepts that have been developed by our own experts. Naturally, we continue to provide further optimisation of these fundamental concepts to the benefit of our customers. Kranunion products are therefore based on practical requirements and are a symbiosis of tradition and innovation combining the tried and tested, with the new.

Customers who choose Kranunion choose great German engineering skill: environmentally-friendly and safe, modern technology, low operating costs, high-tech performance and reliability.

ARDELT HEEGERMÜHLER STRASSE 64 D-16225 EBERSWALDE

PHONE +49 (0)33 34.62-0 FAX +49 (0)33 34.62 23 08 E-MAIL [email protected]

WWW ARDELT.DE

ARDELT IS A MEMBER OF KRANUNION.