DOCSLIB.ORG

Organic Lasers – Recent Developments on Materials, Device

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Organic Lasers – Recent Developments on Materials, Device Organic Lasers – Recent Developments on Materials, Device Geometries, and Fabrication Techniques Alexander J.C. Kuehne1* and Malte C. Gather2* 1DWI – Leibniz Institute for Interactive Materials, RWTH Aachen University, Germany 2Organic Semiconductor Centre, SUPA, School of Physics and Astronomy, University of St Andrews, United Kingdom *Email: [email protected]; [email protected] Abstract Organic dyes have been used as gain medium for lasers since the 1960s—long before the advent of today’s organic electronic devices. Organic gain materials are highly attractive for lasing due to their chemical tunability and large stimulated emission cross-section. While the traditional dye laser has been largely replaced by solid-state lasers, a number of new and miniaturized organic lasers have emerged that hold great potential for lab-on-chip applications, bio-integration, low-cost sensing and related areas, which benefit from the unique properties of organic gain materials. On the fundamental level, these include high exciton binding energy, low refractive index (compared to inorganic semiconductors) and ease of spectral and chemical tuning. On a technological level, mechanical flexibility and compatibility with simple processing techniques such as printing, roll-to-roll, self-assembly and soft-lithography are most relevant. Here, the authors provide a comprehensive review of the developments in the field over the past decade, discussing recent advances in organic gain materials — today often based on solid-state organic semiconductors — optical feedback structures, and device fabrication. Recent efforts towards continuous wave operation and electrical pumping of solid-state organic lasers are reviewed and new device concepts and emerging applications are summarized. Contents 1. Introduction ........................................................................................................................................................... 3 1.1. General conditions for lasing from organic materials .................................................................................. 4 1.2. Gain, loss and Q-factor ................................................................................................................................. 5 1.3. Triplet absorption and other parasitic losses ............................................................................................... 7 1.4. Amplified spontaneous emission and unambiguous detection of lasing ..................................................... 9 2. Materials ............................................................................................................................................................... 9 2.1. Small Molecules .......................................................................................................................................... 12 2.1.1. New matrices for well-known dyes.................................................................................................... 12 2.1.2. Rylene dyes ........................................................................................................................................ 14 2.1.3. BODIPY based laser dyes .................................................................................................................... 15 2.1.4. Thiophene based dyes ....................................................................................................................... 17 2.1.5. Triphenyldiamines – TPDs .................................................................................................................. 18 2.1.6. Phenylene vinylene small molecules ................................................................................................. 19 2.1.7. Fluorene based small molecules ........................................................................................................ 21 2.1.8. Towards orbital design via precise functionalization with donor and acceptor groups .................... 22 2.2. Defined star-shaped macromolecules ........................................................................................................ 25 2.3. Linear Macromolecules .............................................................................................................................. 27 2.4. Biological Dyes and Fluorescent Proteins ................................................................................................... 33 2.5. Perovskites.................................................................................................................................................. 35 2.6. Conclusion .................................................................................................................................................. 37 3. Optical Feedback Structures................................................................................................................................ 40 3.1. Planar cavities ............................................................................................................................................. 42 3.2. Distributed feedback and photonic crystal structures ............................................................................... 47 3.2.1. One dimensional DFB structures ....................................................................................................... 47 3.2.2. Two and three dimensional photonic crystal structures ................................................................... 53 3.2.3. Development of designs for future electrical operation ................................................................... 54 3.3. Fibers and wires .......................................................................................................................................... 58 3.4. Whispering gallery mode resonators ......................................................................................................... 59 3.4.1. Spherical WGM Resonators ............................................................................................................... 59 3.4.2. Microgoblet and microdisk WGM resonators ................................................................................... 63 3.4.3. Microring-type WGM resonators....................................................................................................... 64 3.4.4. Further considerations on WGM lasers ............................................................................................. 65 3.5. Organic crystal based cavities ..................................................................................................................... 66 3.6. Optofluidic resonator structures ................................................................................................................ 67 3.7. Random lasers ............................................................................................................................................ 70 3.8. Plasmonic structures .................................................................................................................................. 71 3.9. Conclusion .................................................................................................................................................. 73 4. Fabrication ........................................................................................................................................................... 74 4.1. Topical direct writing techniques ............................................................................................................... 74 4.2. Interference lithography and holographic patterning ................................................................................ 77 4.3. Nanoimprinting and micro-contact printing ............................................................................................... 78 4.4. Structure formation via colloidal self-assembly ......................................................................................... 81 4.5. Encapsulation ............................................................................................................................................. 82 4.6. Conclusion .................................................................................................................................................. 84 5. Routes towards continuous wave operation ...................................................................................................... 85 6. Strategies to overcome the challenges associated with electrical pumping of organic lasers ........................... 88 6.1. Absorption by conducting electrodes ......................................................................................................... 88 6.2. Increasing charge carrier mobility and reducing excitonic and polaronic losses ....................................... 91 6.3. Reducing triplet generation ........................................................................................................................ 93 6.4. Conclusion .................................................................................................................................................. 95 7. Outlook ................................................................................................................................................................ 95 7.1. Organic polariton lasers .............................................................................................................................
Load more

Recommended publications
  • Monday, 08:00–10:00 CLEO: QELS-Fundamental Science
    07:00–18:00 Registration, Concourse Level Executive Ballroom Executive Ballroom Executive Ballroom Executive Ballroom 210A 210B 210C 210D CLEO: QELS-Fundamental Science 08:00–10:00 08:00–10:00 08:00–10:00 08:00–10:00 FM1A • Quantum FM1B • Topological Photonics I FM1C • Novel Phenomena in FM1D • Coherent Phenomena Optomechanics & Transduction Presider: To Be Announced Classical Nano-Optics in Coupled Resonator Networks Monday, 08:00–10:00 Monday, Presider: Gabriel Molina Terriza; Presider: Mo Mojahedi; Univ. of Presider: To Be Announced Centro de Fisica de Materiales, Toronto, USA Spain FM1A.1 • 08:00 FM1B.1 • 08:00 FM1C.1 • 08:00 FM1D.1 • 08:00 Invited Ultralow Dissipation Mechanical Resona- Spin-Preserving Chiral Photonic Crystal Brightness Theorems for Nanophoton- Solving Hard Computational Problems with 1,2 1 1 tors for Quantum Optomechanics, Nils Mirror, Behrooz Semnani , Jeremy Flan- ics, Hanwen Zhang , Chia Wei Hsu , Owen Coupled Lasers, Nir Davidson1; 1Weizmann 1 1 2 2 2 1 1 Johan Engelsen , Sergey A. Fedorov , Amir nery , Zhenghao Ding , Rubayet Al Maruf , Miller ; Yale Univ., USA. We present nano- Inst. of Science, Israel. We present a new a 1 1 2,1 1 H. Ghadimi , Mohammad J. Bereyhi , Alberto Michal Bajcsy ; ECE, Univ. of Waterloo, photonic ‘’brightness theorems’’, a set of new system of coupled lasers in a modified 1 1 2 2 Beccari , Ryan Schilling , Dalziel J. Wilson , Canada; Inst. for Quantum Computing, power-concentration bounds that generalize degenerate cavity that is used to solve dif- 1 1 Tobias J. Kippenberg ; Ecole Polytechnique Canada. We report on experimental realiza- their ray-optical counterparts, and motivate ficult computational tasks.
    [Show full text]
  • Nonlinear Nanophotonic Devices in the Ultraviolet to Visible Wavelength
    Nanophotonics 2020; 9(12): 3781–3804 Review Jinghan He, Hong Chen, Jin Hu, Jingan Zhou, Yingmu Zhang, Andre Kovach, Constantine Sideris, Mark C. Harrison, Yuji Zhao and Andrea M. Armani* Nonlinear nanophotonic devices in the ultraviolet to visible wavelength range https://doi.org/10.1515/nanoph-2020-0231 1 Introduction Received April 7, 2020; accepted June 12, 2020; published online July 4, 2020 The past several decades has witnessed the convergence of novel nonlinear materials with nanofabrication methods, Abstract: Although the first lasers invented operated in enabling a plethora of new nonlinear optical (NLO) devices the visible, the first on-chip devices were optimized for [1–4]. Originally, the focus was on developing devices near-infrared (IR) performance driven by demand in tele- operating in the telecommunications wavelength band to communications. However, as the applications of inte- improve communications. One example of an initial suc- grated photonics has broadened, the wavelength demand cess is on-chip modulators and add-drop filters for has as well, and we are now returning to the visible (Vis) switching and isolating of optical wavelengths. While and pushing into the ultraviolet (UV). This shift has initial devices were fabricated from crystalline materials required innovations in device design and in materials as [5–7], the highest performing devices were made from well as leveraging nonlinear behavior to reach these organic polymers [8–16]. As nanofabrication processes wavelengths. This review discusses the key nonlinear improved, higher performance integrated devices were phenomena that can be used as well as presents several developed, such as high quality factor optical resonant emerging material systems and devices that have reached cavities, and higher order nonlinear behaviors became the UV–Vis wavelength range.
    [Show full text]
  • Merging Photonics and Artificial Intelligence at the Nanoscale
    Intelligent Nanophotonics: Merging Photonics and Artificial Intelligence at the Nanoscale Kan Yao1,2, Rohit Unni2 and Yuebing Zheng1,2,* 1Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas 78712, USA 2Texas Materials Institute, The University of Texas at Austin, Austin, Texas 78712, USA *Corresponding author: [email protected] Abstract: Nanophotonics has been an active research field over the past two decades, triggered by the rising interests in exploring new physics and technologies with light at the nanoscale. As the demands of performance and integration level keep increasing, the design and optimization of nanophotonic devices become computationally expensive and time-inefficient. Advanced computational methods and artificial intelligence, especially its subfield of machine learning, have led to revolutionary development in many applications, such as web searches, computer vision, and speech/image recognition. The complex models and algorithms help to exploit the enormous parameter space in a highly efficient way. In this review, we summarize the recent advances on the emerging field where nanophotonics and machine learning blend. We provide an overview of different computational methods, with the focus on deep learning, for the nanophotonic inverse design. The implementation of deep neural networks with photonic platforms is also discussed. This review aims at sketching an illustration of the nanophotonic design with machine learning and giving a perspective on the future tasks. Keywords: deep learning; (nano)photonic neural networks; inverse design; optimization. 1. Introduction Nanophotonics studies light and its interactions with matters at the nanoscale [1]. Over the past decades, it has received rapidly growing interest and become an active research field that involves both fundamental studies and numerous applications [2,3].
    [Show full text]
  • Book of Abstracts
    Book of Abstracts 3 Foreword The 23 rd International Conference on Atomic Physics takes place in Ecole Polytechnique, a high level graduate school close to Paris. Following the tradition of ICAP, the conference presents an outstanding programme of invited VSHDNHUVFRYHULQJWKHPRVWUHFHQWVXEMHFWVLQWKH¿HOGRIDWRPLFSK\VLFVVXFKDV Ultracold gases and Bose Einstein condensates, Ultracold Fermi gases, Fundamental atomic tests and measurements, Precision measurements, atomic clocks and interferometers, Quantum information and simulations with atoms and ions, Quantum optics and cavity QED with atoms, Atoms and molecules in optical lattices, From two-body to many-body systems, Ultrafast phenomena and free electron lasers, Beyond atomic physics (biophysics, optomechanics...). The program includes 31 invited talks and 13 ‘hot topic’ talks. This book of abstracts gathers the contributions of these talks and of all posters, organized in three sessions. The proceedings of the conference will be published online in open access by the “European 3K\VLFDO-RXUQDO:HERI&RQIHUHQFHV´KWWSZZZHSMFRQIHUHQFHVRUJ On behalf of the committees, we would like to welcome you in Palaiseau, and to wish you an excit- ing conference. 4 Committees Programme committee Alain Aspect France Michèle Leduc France Hans Bachor Australia Maciej Lewenstein Spain Vanderlei Bagnato Brazil Anne L’Huillier Sweden Victor Balykin Russia Luis Orozco USA Rainer Blatt Austria Jian-Wei Pan China Denise Caldwell USA Hélène Perrin France Gordon Drake Canada Monika Ritsch-Marte Austria Wolfgang Ertmer Germany Sandro Stringari Italy Peter Hannaford Australia Regina de Vivie-Riedle Germany Philippe Grangier France Vladan Vuletic USA Massimo Inguscio Italy Ian Walmsley UK Hidetoshi Katori Japan Jun Ye USA Local organizing committee Philippe Grangier (co-chair) Institut d’Optique - CNRS Michèle Leduc (co-chair) ENS - CNRS Hélène Perrin (co-chair) U.
    [Show full text]
  • Nanolaser Arrays
    Nanophotonics 2021; 10(1): 149–169 Review Suruj S. Deka*, Sizhu Jiang, Si Hui Pan and Yeshaiahu Fainman Nanolaser arrays: toward application-driven dense integration https://doi.org/10.1515/nanoph-2020-0372 1 Introduction Received July 4, 2020; accepted September 8, 2020; published online September 29, 2020 In the quest for attaining Moore’s law-type scaling for Abstract: The past two decades have seen widespread photonics, miniaturization of components for dense efforts being directed toward the development of nano- integration is imperative [1]. One of these essential scale lasers. A plethora of studies on single such emitters nanophotonic components for future photonic inte- have helped demonstrate their advantageous character- grated circuits (PICs) is a chip-scale light source. To istics such as ultrasmall footprints, low power consump- this end, the better part of the past two decades has tion, and room-temperature operation. Leveraging seen the development of nanoscale lasers that offer knowledge about single nanolasers, the next phase of salient advantages for dense integration such as ultra- nanolaser technology will be geared toward scaling up compact footprints, low thresholds, and room- design to form arrays for important applications. In this temperature operation [2–4]. These nanolasers have review, we discuss recent progress on the development of been demonstrated based on a myriad of cavity designs such array architectures of nanolasers. We focus on and physical mechanisms some of which include pho- valuable attributes and phenomena realized due to tonic crystal nanolasers [5–8], metallo-dielectric nano- unique array designs that may help enable real-world, lasers [9–15], coaxial-metal nanolasers [16, 17], and practical applications.
    [Show full text]
  • Integrated Photonics on Thin-Film Lithium Niobate
    Integrated photonics on thin-film lithium niobate DI ZHU,1,* LINBO SHAO,1 MENGJIE YU,1 REBECCA CHENG,1 BORIS DESIATOV,1 C. J. XIN,1 YAOWEN HU,1 JEFFREY HOLZGRAFE,1 SOUMYA GHOSH,1 AMIRHASSAN SHAMS-ANSARI,1 ERIC PUMA,1 NEIL SINCLAIR,1,2 CHRISTIAN REIMER,3 MIAN ZHANG,3 AND MARKO LONČAR1,* 1John A. Paulson School of Engineering and Applied Sciences, Harvard University, 29 Oxford Street, Cambridge, Massachusetts 02138, USA 2Division of Physics, Mathematics and Astronomy, and Alliance for Quantum Technologies (AQT), California Institute of Technology, 1200 E. California Boulevard, Pasadena, CA 91125, USA 3HyperLight Corporation, 501 Massachusetts Avenue, Cambridge, Massachusetts 02139, USA [email protected], [email protected] Lithium niobate (LN), an outstanding and versatile material, has influenced our daily life for decades: from enabling high-speed optical communications that form the backbone of the Internet to realizing radio-frequency filtering used in our cell phones. This half-century-old material is currently embracing a revolution in thin-film LN integrated photonics. The success of manufacturing wafer-scale, high-quality, thin films of LN on insulator (LNOI), accompanied with breakthroughs in nanofabrication techniques, have made high-performance integrated nanophotonic components possible. With rapid development in the past few years, some of these thin-film LN devices, such as optical modulators and nonlinear wavelength converters, have already outperformed their legacy counterparts realized in bulk LN crystals. Furthermore, the nanophotonic integration enabled ultra-low-loss resonators in LN, which unlocked many novel applications such as optical frequency combs and quantum transducers. In this Review, we cover—from basic principles to the state of the art—the diverse aspects of integrated thin- film LN photonics, including the materials, basic passive components, and various active devices based on electro-optics, all-optical nonlinearities, and acousto-optics.
    [Show full text]
  • Physics and Applications of Photonic Crystal Nanocavities
    PHYSICS AND APPLICATIONS OF PHOTONIC CRYSTAL NANOCAVITIES A DISSERTATION SUBMITTED TO THE DEPARTMENT OF APPLIED PHYSICS AND THE COMMITTEE ON GRADUATE STUDIES OF STANFORD UNIVERSITY IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY Hatice Altug December 2006 © Copyright by Hatice Altug 2007 All Rights Reserved 2 I certify that I have read this dissertation and that in my opinion it is fully adequate, in scope and quality, as dissertation for the degree of Doctor of Philosophy. __________________________________ (Jelena Vuckovic) Principal Advisor I certify that I have read this dissertation and that in my opinion it is fully adequate, in scope and quality, as dissertation for the degree of Doctor of Philosophy. __________________________________ (Martin M. Fejer) Academic Advisor I certify that I have read this dissertation and that in my opinion it is fully adequate, in scope and quality, as dissertation for the degree of Doctor of Philosophy. __________________________________ (Shanhui Fan) Academic Advisor Approved for the University Committee on Graduate Studies __________________________________ 3 ABSTRACT The capability to confine and manipulate photons at nanometer scales opens up unprecedented opportunities in classical and quantum information processing technologies, and also in life sciences. There have been various demonstrations of sub-micron light confinement, but yet the most critical issue ahead is the development of new device concepts and technologies that will reliably operate at such length scales. In this thesis, we present our efforts along this direction. The large aggregated bandwidths of the optical interconnects require memory and delay components to launch, buffer, and collect optical signals at the nodes.
    [Show full text]
  • Amplified Spontaneous Emission and Lasing in Lead Halide
    applied sciences Review Amplified Spontaneous Emission and Lasing in Lead Halide Perovskites: State of the Art and Perspectives Maria Luisa De Giorgi and Marco Anni * Dipartimento di Matematica e Fisica “Ennio De Giorgi”, Università del Salento, Via per Arnesano, 73100 Lecce, Italy; [email protected] * Correspondence: [email protected]; Tel.: +39-0832-297540 Received: 9 October 2019; Accepted: 24 October 2019; Published: 29 October 2019 Abstract: Lead halide perovskites are currently receiving increasing attention due to their potential to combine easy active layers fabrication, tunable electronic and optical properties with promising performance of optoelectronic and photonic device prototypes. In this paper, we review the main development steps and the current state of the art of the research on lead halide perovskites amplified spontaneous emission and on optically pumped lasers exploiting them as active materials. Keywords: lead halide perovskite; thin film; nanocrystal; optical gain; amplified spontaneous emission; laser 1. Introduction In the frame of developing novel active materials for electronic, optoelectronic and photonic devices, lead halide perovskites are currently receiving great attention due to their capability to combine an easy realization procedure, widely tunable electronic properties and promising performance as active materials for a wide range of devices. In particular, perovskite-based solar cells demonstrated an impressively fast power conversion efficiency increase, from 3.8% in TiO2 sensitized photoelectrochemical cells [1], to the recent record value of 25.2% [2] in thin film solar cells. Lead halide perovskites also showed interesting photoluminescence (PL) and electroluminescence properties, which stimulated the research in light emitting devices, such as light emitting diodes (LEDs) [3].
    [Show full text]
  • New Materials and Device Architectures for Organic Solid-State Lasers Hadi Rabbani-Haghighi
    New materials and device architectures for organic solid-state lasers Hadi Rabbani-Haghighi To cite this version: Hadi Rabbani-Haghighi. New materials and device architectures for organic solid-state lasers. Optics [physics.optics]. Université Paris-Nord - Paris XIII, 2011. English. tel-00643467 HAL Id: tel-00643467 https://tel.archives-ouvertes.fr/tel-00643467 Submitted on 22 Nov 2011 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. UNIVERSITÉ PARIS 13 INSTITUT GALILÉE LABORATOIRE DE PHYSIQUE DES LASERS THÈSE présentée pour obtenir le grade de DOCTEUR DE L’UNIVERSITÉ PARIS 13 Discipline : Physique par Hadi Rabbani-Haghighi Nouveaux matériaux et architectures de dispositifs pour les lasers organiques à l’état solide Soutenue le 26 octobre 2011 devant le jury composé de : M. Alain Siove, LPL, Université PARIS 13 Directeur de thèse Mme Isabelle Ledoux-Rak, LPQM, ENS Cachan Rapportrice M. Patrick Georges, LCF, Institut d’Optique Graduate School Rapporteur Mme Sophie Bouchoule, Laboratoire de Photonique et Nanostructures M. Jean-Jacques Simon, IM2NP, Université Paul Cézanne Aix –Marseille III Mme Elena Ishow, CEISAM, Université de Nantes M. Frédéric du Burck, LPL, Université PARIS 13 M. Sébastien Chénais, LPL, Université PARIS 13 To my beloved family and the important persons in my life ii Acknowledgements The current dissertation is the result of a three-year work that has been realized in the organic photonics and nanostructures group, part out of eight groups at Laboratoire de Physique des Lasers (LPL), university of Paris 13.
    [Show full text]
  • Nonlinear Nanophotonic Devices in The
    Nanophotonics 2020; 9(12): 3781–3804 Review Jinghan He, Hong Chen, Jin Hu, Jingan Zhou, Yingmu Zhang, Andre Kovach, Constantine Sideris, Mark C. Harrison, Yuji Zhao and Andrea M. Armani* Nonlinear nanophotonic devices in the ultraviolet to visible wavelength range https://doi.org/10.1515/nanoph-2020-0231 1 Introduction Received April 7, 2020; accepted June 12, 2020; published online July 4, 2020 The past several decades has witnessed the convergence of novel nonlinear materials with nanofabrication methods, Abstract: Although the first lasers invented operated in enabling a plethora of new nonlinear optical (NLO) devices the visible, the first on-chip devices were optimized for [1–4]. Originally, the focus was on developing devices near-infrared (IR) performance driven by demand in tele- operating in the telecommunications wavelength band to communications. However, as the applications of inte- improve communications. One example of an initial suc- grated photonics has broadened, the wavelength demand cess is on-chip modulators and add-drop filters for has as well, and we are now returning to the visible (Vis) switching and isolating of optical wavelengths. While and pushing into the ultraviolet (UV). This shift has initial devices were fabricated from crystalline materials required innovations in device design and in materials as [5–7], the highest performing devices were made from well as leveraging nonlinear behavior to reach these organic polymers [8–16]. As nanofabrication processes wavelengths. This review discusses the key nonlinear improved, higher performance integrated devices were phenomena that can be used as well as presents several developed, such as high quality factor optical resonant emerging material systems and devices that have reached cavities, and higher order nonlinear behaviors became the UV–Vis wavelength range.
    [Show full text]
  • Spectral Linewidth in Microcavity Surface-Emitting Lasers
    Spectral linewidth in microcavity surface-emitting lasers lgor Vurgaftman and Jasprit Singh Solid State Electronics Laboratory, Department of Electrical Engineering and Computer Science, The Unitiersity of Michigan, Ann Arbor; Michigan 48109-2122 (Received13 May 1994; acceptedfor publication 29 July 1994) The Schawlow-Townes expressionfor the laser linewidth predicts a substantial cw linewidth enhancementin microcavity lasers, in which a large fraction of spontaneousemission is directed into the lasing mode, in contrastwith conventionalsemiconductor lasers, in which the lasing mode acceptsonly a tiny fraction of spontaneouslyemitted photons.By performing a theoreticalanalysis of rigorous solutions of the wave equationin the surface-emittingcavity and of the band structure in the active region, it is shown that the increasein the linewidth is much slower than the increase in the spontaneous-emissionfactor p becauseof reductionsin the total spontaneousemission rate, the threshold carrier density, and the linewidth enhancementfactor and an increasedslope of the light-current characteristicobtained for the microcavity laser in steady state. Also much smaller driving currentsin a microcavity laser are requiredto achievethe samepower output comparedwith conventionalsemiconductor lasers, resulting in a linewidth of the order of severalhundred MHz at moderate driving currents for the former. We also discuss the various factors influencing the linewidth in microcavity and strainedquantum well lasersand the relation betweenlasing threshold and spectral linewidth in both macroscopicand microscopic cavity lasers. INTRODUCTION laser geometry.The efficiency of microcavity lasers is owed to the fact that a large fraction (>O.l) of spontaneouslyemit- The availability of single-mode semiconductor lasers ted photonsis directedinto the lasing mode comparedwith a made initial precise measurementsof the cw spectral width tiny fraction (-lo-‘) in conventional cavity laser diodes.
    [Show full text]
  • Frontiers in Optics 2010/Laser Science XXVI
    Frontiers in Optics 2010/Laser Science XXVI FiO/LS 2010 wrapped up in Rochester after a week of cutting- edge optics and photonics research presentations, powerful networking opportunities, quality educational programming and an exhibit hall featuring leading companies in the field. Headlining the popular Plenary Session and Awards Ceremony were Alain Aspect, speaking on quantum optics; Steven Block, who discussed single molecule biophysics; and award winners Joseph Eberly, Henry Kapteyn and Margaret Murnane. Led by general co-chairs Karl Koch of Corning Inc. and Lukas Novotny of the University of Rochester, FiO/LS 2010 showcased the highest quality optics and photonics research—in many cases merging multiple disciplines, including chemistry, biology, quantum mechanics and materials science, to name a few. This year, highlighted research included using LEDs to treat skin cancer, examining energy trends of communications equipment, quantum encryption over longer distances, and improvements to biological and chemical sensors. Select recorded sessions are now available to all OSA members. Members should log in and go to “Recorded Programs” to view available presentations. FiO 2010 also drew together leading laser scientists for one final celebration of LaserFest – the 50th anniversary of the first laser. In honor of the anniversary, the conference’s Industrial Physics Forum brought together speakers to discuss Applications in Laser Technology in areas like biomedicine, environmental technology and metrology. Other special events included the Arthur Ashkin Symposium, commemorating Ashkin's contributions to the understanding and use of light pressure forces on the 40th anniversary of his seminal paper “Acceleration and trapping of particles by radiation pressure,” and the Symposium on Optical Communications, where speakers reviewed the history and physics of optical fiber communication systems, in honor of 2009 Nobel Prize Winner and “Father of Fiber Optics” Charles Kao.
    [Show full text]