Eco-Friendly Timber Acoustic Panels. Comes in Grooved and Perforations As Small As 500 Microns

Home , Sandalwood

Timberix Catalogue 2020/2021 Eco-friendly timber acoustic panels. Comes in grooved and perforations as small as 500 microns.

AntiCAD Pte. Ltd. Contact: +65 6909 5678 Website: www.timberix.com E-mail: [email protected] Registration No.: 201700104G Address: Oxley BizHub 1, 65 Ubi Road 1, #04-36, Singapore 408729 TIMBERIX WOODEN GROOVED PANEL Pattern 14-2 Pattern 13-3 Pattern 28-4

1 Our wooden grooved acoustic panel is made up of a series of slats and grooves. Each panel has a machined tongue and groove joint for a seamless joinery. Timberix™ wooden grooved panels come in 4 different patterns: 13-3, 14-2, 28-4, 59-5. The first number refers to the slat size (mm) and and second number refers to the groove size (mm). The surface comes in 4 types of finishing: paint, melamine, PP, and veneer. The base material can be made of MDF, fire-resistant MDF, eco-friendly MDF, black MDF, 3-layer composite, 5-layer composite or OSB. Timberix™ wooden grooved panels reduce echoes by trapping and diffracting sound in the grooves and perforation found on the surface. The sound that passes through the perforation is further Specifications absorbed by an acoustic substrate such as fibreglass or mineral wool, which reduces reverberation in the room. Smaller grooves 1. Structure: Base Material, Finishing & Fleece are better at attenuating high frequency sounds, whereas larger 2. Material: E1 MDF, FR MDF, MgO Composite Board, etc. grooves are better at controlling low frequency sounds. 3. Finishing: Paint, Melamine, PP, Veneer, etc. 4. Standard Dimension: 2440*192mm, 2440*128mm 5. Standard Thickness: 12mm, 15mm,18mm 6. Standard Pattern: 13-3,14-2, 28-4, 59-5 7. Eco-Friendly Test: EN 13986 = E1 8. Fire-Rated Test: EN 13501-1 = Class B s1, d0

1 INSTALLATION: TIMBERIX WOODEN GROOVED PANEL

B) Installation

1. Mark out placement of Timberix™ panels, and take into account M&E positions. 2. Cut panels to size according to final positions. 3. Decide on type of installation system to use. 4. Install acoustic substrate of choice. 5. Join Timberix™ wooden grooved panels from top-to-bottom, and left-to-right. 6. For wood laminate and veneer finishes, ensure that wooden grooved panels are installed with matching grain directions. 7. Clean surface of the Timberix™ panels with compressed air and gently wipe with dry cloth. 1

C) Installation System

1. Steel keel system 2. Wooden batten system

AA03 AA02 Wooden Grooved Acoustic Panel AA01 Wooden A) Preparation Sound Absorption Batten Distance < 600mm Sound Absorption Wool Wool AA01

1. Place of installation must be dry, with temperature no less Distance < 600mm than 10 degrees Celsius. AA02 AA02 2. Humidity level should be kept between 40% to 60%. 1. Installation accessories 2. Fix AA01 keel on wooden battens 3. Use sound absorption wool as padding 3. Timberix™ panels must be placed on site for at least 48 hours in order to adapt to the environmental conditions. 4. Distance between each wooden batten should be less than 5 AA01 AA03 AA03 00mm, and that between each steel keel should be no more than 600mm. AA03 AA02 Wooden Batten 4. Fix AA02 and AA03 clips in a line 5. Start to install panels 6. Install another line of panels

Cross-section Structure Installation: Steel Keel System

2 Home Theatre

Location Wan Tho Ave, Singapore

Client Private

Architect HYLA Architects

Consultant Soundzipper LLP

Main Contractor Emma Group Pte Ltd

The home theatre located at Wan Tho Ave in Singapore was

1 designed to achieve acoustics specifications of Sound Transmis- sion Class (STC) 55, Impact Isola- tion Class (IIC) 50, and Revebera- tion Time to decay 60 Decibels (RT60) time of 0.8 seconds.

The consultant Soundzipper LLP Timberix Grooved 14/2 Wan Tho Avenue, Singapore has nominated both Timberix and Fabrix acoustic panels to achieve the required RT60 time.

Timberix grooved panels with grooves 14/2, and black walnut and PU matte lacquer finish were installed onto the walls and ceiling of the theatre. Fabrix acoustic panels were also cladded onto the front and dihedral corners of the room to achieve the required reverberation time.

3 TIMBERIX Specifications WOODEN PERFORATED PANEL 1. Structure: Basic Material, Finishing & Fleece 2. Material: E1 MDF, FR MDF, MgO Composite, etc. 3. Front Surface: Melamine, PP, Wood Veneer, Paint, etc. 4. Standard Dimension: 600mm x 600mm, 600mm x 1200mm, 1200mm x 1200mm, 1200mm x 2400mm 5. Standard Thickness: 12mm, 15mm, 18mm 6. Distances of Two Holes: 8/8mm, 16/16mm and 32/32mm 7. Diameter of Holes: 1, 2, 3, 4, 5, 6, 8,10, 12mm, etc. 8. Standard Pattern: E8/8/3, E16/16/6, E16/16/8, E32/32/6, E32/32/8, V8/8/3, V16/16/6, V16/16/8, V32/32/6, V32/32/8 9. Microperforated Pattern: E4/4/1, E8/8/1, V4/4/1, V8/8/1, V1.8/1.8/0.5, V3.6/1.8/0.5 9. Hole Arrangement: Linear (E), Staggered (V) 10. Eco-Friendly Test: EN 13986 = E1 11. Fire-Rated Test: EN 13501-1 = Class B s1, d0

Timberix™ wooden perforated panels is made with a 2-layer Our wooden perforated acoustic panel is made up of a series perforation structure, which traps and diffracts sound in the of perforations. Each panel has a machined groove joint for holes. The sound that passes through the perforation is further either a seamless or gap joinery. Timberix™ perforated panels come in absorbed by an acoustic substrate such as fibreglass or mineral 10 standard patterns and the microperforated panels come in wool, which reduces reverberation in the room. The perforation 6 standard patterns. The first alphabet refers to the hole arrangement comes in many sizes ranging from 1mm to 25mm. Smaller holes (E is linear and V is staggered), the second pair of numbers are better at attenuating low frequency sounds, whereas larger refer to the distance between the two holes, and the last number holes are better at reducing high frequency sounds. refers to the hole diameter. The surface comes in 4 types of finishing: paint, melamine, PP, and veneer. The base material can be made of MDF, fire-resistant MDF, eco-friendly MDF, black MDF, 3-layer composite, 5-layer composite or OSB.

4 INSTALLATION: TIMBERIX 8mm Pattern: WOODEN PERFORATED PANEL 8-8-1 Micro Holes

6mm

Pattern: 16-16-6

C) Installation System

Wooden panels expand and contract with changes in humidity and temperature. We strongly recommend using Installation System I (with gap) to prevent buckling of panels. A) Preparation Installation System I (with gap) 1. Place of installation must be dry, with temperature no less than 10 degrees Celsius. 1 2 3 Wood Strip 2. Humidity level should be kept between 40% to 60%. AA05 AA04 3. Timberix™ panels must be placed on site for at least 48 hours in order to adapt to environmental conditions.

B) Installation Cross-section Structure

1. Mark out placement of Timberix™ panels, and take into Installation System II (without gap) account M&E positions. 2. Decide on type of installation system to use. 1 2 3 3. Install acoustic substrate of choice. AA05 AA04 4. For wood laminate and veneer finishes, ensure that panels are installed with matching grain directions. 5. Clean surface of the Timberix™ panels with compressed air and gently wipe with dry cloth. Cross-section Structure 5 Multi-Purpose Hall

Location 1160 Depot Road, Singapore

Client Hewlett Packard Enterprise

Architect RSP Architects Planners and Engi- neers Pte. Ltd.

Main Contractor SpaceLogic Pte. Ltd.

The Hewlett-Packard Company (commonly referred to as HP) was an American multinational informa- tion technology company head- quartered in Palo Alto, California.

The Multi-Purpose Hall (MPH) was built in 2016 to facillitate both arts performances and sports events. The hall also serves as a venue for business functions wtihin Hewl- Timberix Perforated 32/32/6 ett-Packard. Hewlett Packard, Singapore The acoustics of the MPH was designed to achieve an RT60 time of 1.2 - 1.8 seconds. Timberix perforated panels with perforations E 32/32/6, and oak melamine finish were installed onto the walls of the hall. Fabrix acoustic panels were also cladded onto the left and right side of the hall to achive the required reveberation time.

6 ™ 0.1mm Thick Timberix Melamine Low-Pressure Laminate

01 Maple Crown 02 Light Maple Crown 03 Maple Crown 04 Bleached Walnut Crown 05 Beech Crown 06 Ash Crown

07 Light Oak Straight 08 Oak Crown 09 European Oak Straight 10 Rosewood Random Match 11 Stained Ash Straight 12 Teak Crown

13 Light Walnut Crown 14 Walnut Crown 15 Stained Oak Crown 16 Rosewood Crown 17 Autumnwood Crown 18 Sapele Straight

7 ™ 0.1mm Thick Timberix Melamine Low-Pressure Laminate

19 Cherry Straight 20 Cherry Crown 21 Swiss Pearwood Crown 22 Sandalwood Crown 23 Applewood Crown 24 Elm Crown

25 Burmese Teak Straight 26 Dark Oak Crown 27 English Walnut Crown 28 African Walnut Crown 29 American Walnut Crown 30 Ugyen Crown

31 Dark Teak Crown 32 Black Oak Crown 33 Black Walnut Crown 34 Dark Walnut Crown 35 White Matte 36 Lotus White Matte

8 ™ 0.1mm Thick ™ 0.6mm Thick Timberix Melamine Low-Pressure Laminate Timberix Veneer Natural or Reconsituted

37 Pure Black Matte 38 Dark Ash Grey Matte 39 Scarlet Red Matte 01 Maple Crown 02 Maple Straight 03 Beech Straight

40 Wine Red Matte 41 Seafoam Blue Matte 42 Windsor Blue Matte 04 Ash Crown 05 Bamboo Straight 06 White Oak Crown

43 Warm Grey Matte 44 Light Grey Matte 07 White Oak Straight 08 Washed Oak Straight 09 Sycamore Figured

9 ™ 0.6mm Thick Timberix Veneer Natural or Reconsituted

10 Birch Figured 11 Anigre Straight 12 Carbonised Bamboo 13 Black Walnut Straight 14 African Walnut Straight 15 Red Oak Straight

16 White Oak Crown 17 Zebrawood Straight 18 Teak Straight 19 Sapele Straight 20 Ebony Straight 21 Pheasantwood Straight

22 Cherry Crown 23 Black Walnut Crown 34 Rosewood Crown 25 African Rosewood Straight 26 Brazilian Rosewood Crown 27 Smoked Oak

10 ™ 0.6mm Thick ™ 0.1mm Thick Timberix Veneer Natural or Reconsituted Timberix Paint Glossy or Matte Finish

28 Smoked Eucalyptus 29 Teak Straight 30 Indonesian Ebony Straight 11 Ivory White Glossy 12 Ivory White Matte 13 Black Glossy

14 Black Matte 15 Island Paradise Glossy 16 Island Paradise Matte

17 Lapis Blue Glossy 18 Lapis Blue Matte