Our High-Resolution Brochure

Total Page:16

File Type:pdf, Size:1020Kb

Our High-Resolution Brochure www.ultrawiztools.com UltraWiz® Original Cold Knife Blades UltraWiz® UltraThin Blades The 1000 Series The 5000 Series ® ® UltraWiz Original UltraWiz® Original Blades, To meet the demand for thinner UltraWiz UltraThin Blades "the blades that perma- blades, UltraWiz® created Blades nently changed the industry" the UltraThin Blade. They are manufactured by A.N. are 40% thinner than our Designs Inc. The 1000 Series Original Blade, surpassing its was introduced in strength and durability. 1986 and quickly 1000 vs 5000 A two-step coining became known for being consistently sharp and tough. process includes a second thinning operation UltraWiz® is preferred by the majority of technicians in prior to heat treating the blade without removing the industry because of their reliability and has become any material. UltraThin Blades out perform any other the most popular cold knife blade in the auto glass cold knife blade on the market; cutting with unequaled replacement industry. ease and lasting durability. UltraWiz® UltraWiz® Starter Blade 10 UltraThin Standard Blade 10 1000-M 5001-M 3/8" Cut Length 3/4" Cut Length Use to precut urethane Use to precut urethane Also use for narrow urethane beads UltraWiz® UltraWiz® Standard Blade 10 UltraThin Long Blade 10 1001-M 5002-M 3/4" Cut Length 1" Cut Length Use to precut urethane Our most popular cut length Also use for narrow urethane beads Use for cutting most urethane beads UltraWiz® UltraWiz® Long Blade 10 UltraThin Extended Long Blade 10 1002-M 5003-M 1" Cut Length 1 1/4" Cut Length Our most popular cut length Use for wider urethane beads Use for cutting most urethane beads Works best when precut with our Standard Blade UltraWiz® UltraWiz® Extended 10 UltraThin XL Blade 10 Long Blade 5004-M 1003-M 1 1/4" Cut Length 1 1/2" Cut Length Use for wide urethane beads Use for wider urethane beads Works best when precut with our Standard Blade Works best when precut with our Standard Blade UltraWiz® UltraWiz® XL Blade 10 UltraThin XXL Blade 5 1004-M 5006-M NEW 1 1/2" Cut Length 2" Cut Length Use for wide urethane beads This is a limited use blade for the deepest corners Works best when precut with our Standard Blade to reach urethane that must be done from the outside UltraWiz® Coated Paint Protection Blades UltraWiz® Coated Reverse Bend Blades The 51C0 Series The 52C0 Series ® UltraWiz With the advent of The innovative Reverse Bend Blade design NEW Paint Protection Blades exposed pinch welds, is an UltraThin blade bent in the reverse the risk of paint dam- direction of a regular cold knife blade with age poses new obsta- the added paint protection coating. This allows the cles for the auto glass technician to cut down and awayfrom the glass, technician. UltraWiz® rather than up towards the glass. The reverse bend cuts developed a special coated blade designed to reduce without digging into or damaging encapsulated glass this damage. The coated UltraThin Paint Protection or underside moulding. The shank’s cutting edge has Blades are the strongest and thinnest coated cold been modified to prevent scratches to the pinch weld knife blades available! The coating protects automo- or from cutting into the perimeters of parts with applied tive paint from scratches and damage while cutting mouldings on the edge of the glass. out windshields, back glasses or quarter glasses with exposed pinch welds. With enough clearance for the blade between the glass and body, concerns about pinch weld paint damage are greatly reduced. UltraWiz® Coated Reverse Bend Standard 5 UltraWiz® Coated Paint Protection Blade UltraThin Standard 10 52C1-M Paint Protection Blade 51C1-M 3/4" Cut Length Use to precut urethane Use for narrow urethane beads 3/4" Cut Length Use to precut urethane Use for narrow urethane beads UltraWiz® Coated Reverse Bend Long 5 UltraWiz® Coated Paint Protection Blade UltraThin Long Paint Protection Blade 10 52C2-M 51C2-M 1" Cut Length 1" Cut Length Our most popular cut length Our most popular cut length Use this blade for the majority of auto glass removals Use this blade for the majority of auto glass removals UltraWiz® UltraWiz® Coated Coated Reverse Bend XL 5 UltraThin Extended Long 10 Paint Protection Blade Paint Protection Blade 52C4-M 51C3-M 1 1/4" Cut Length 1 1/2" Cut Length Use for medium to wide urethane beads Use for wide urethane beads and corners Works best when precut with a standard blade Works best when precut with a Standard blade UltraWiz® Coated UltraWiz® UltraThin XL Paint Protection Blade 10 Reverse Bend Blades 51C4-M The 5200 Series 1 1/2" Cut Length Use for wide urethane beads 1 1/2" 3/4" Works best when precut with a standard blade 1" UltraWiz® Radius Serrated Blades UltraWiz® Stainless Steel Blades The 6990 Series The 7000 Series We added this new radius grind to our unique serration design In 2000, UltraWiz® engineers answered the request to produce with its small, leading edge points that pierce the urethane for a high-quality – sharp and strong stainless steel blade with the an easier pull during cutting. With only small serration points benefits of edge sharpness and strength. Unmatched hardening touching the glass, the majority of the blade stays sharper, of the Stainless Steel produce the longest lasting cutting edge longer. Finally, to keep the strength of the extremely thin radius available today; even outlasting our own carbon steel blades. serrated blade, we added a center rib for overall strength. The It is also the first coined Stainless Steel blade produced for the combination of our thin design and unique serrations provides auto glass replacement industry. less cutting resistance than any other blade in the industry. UltraWiz® Stainless Standard Blade 10 7001-M NEW 3/4" Cut Length Use to precut urethane Also use for narrow urethane beads UltraWiz® Stainless Long Blade 7002-M 10 1" Cut Length Our most popular cut length UltraWiz® Use for cutting most urethane beads Standard Radius Serrated Blade 5 6991-M UltraWiz® Stainless XL Blade 7004-M 10 1 1/2" Cut Length Use for wider urethane beads Works best when precut with our Standard Blade 3/4" Cut Length Use to precut urethane UltraWiz® Scraper Blades Also use for narrow urethane beads The 8000 Series Pinch weld Scraper Blades are available in three sizes; 1/2" to UltraWiz® 5 1". The scraper blades are made from the same high quality Long Radius Serrated Blade material as the UltraWiz® cold Knife Blades. Any UltraWiz® 6992-M Cable Knife can be used with the Scraper Blade. The blade can be re-sharpened multiple times. UltraWiz® 1 1/2" Scraper Blade 8000-S Use for removing adhesives from 1" Cut Length narrow pinch welds Our most popular cut length Use for cutting most urethane beads UltraWiz® 1 3/4" Scraper Blade UltraWiz® 8001-S XL Radius Serrated Blade 5 Use for removing adhesives from 6994-M medium width pinch welds PACKAGING OF BLADES 5 Blades are packaged 5 in a tube 1 2 1 / " Cut Length 10 Blades are packaged 10 in a tube Use for wider urethane beads and corners Works best when precut with our Standard Blade 10 Blades are packaged 10 in a box UltraWiz® Cable Knives UltraWiz® Lever Knives The 3000 Series The 3000 Series The UltraWiz® Standard Cable Knives are made from high-quality The UltraWiz® Patented Lever Knives are made from high quality aluminum. The 3001 handles are ergonomically shaped to provide aluminum. Our handles are ergonomically shaped to provide comfort and gripping power. The pull cable attachment is made of comfort and gripping power. The unique lever action design heavy-duty stainless steel that strengthens the connection between allows for unlimited adjustments and easy blade changes. Choose the Nut, Bolt, and Bushing. Our unique setscrew design on the these knives for quick, easy and fully adjustable blade changes. 3001-K allows for unlimited adjustments and easy blade changes. The inline pull cable has a heavy-duty eyelet for added strength The durable foam-covered handle and the vinyl-coated Pull Cable along with a foam-covered grip for comfort. There are two offers comfort for the technician and protection to the vehicle sizes to choose from, both designed using OSHA's Ergonomic Guidelines for Selecting Hand Tools. Patent No.7,596,871 UltraWiz® Pull Cable Kit UltraWiz® 3001-K Lever Knife Kit with Pull Cable 3007-K Our Original UltraWiz® 11/2" wide x 3/4" high 4 3/4" knife ✷ Kit includes 1002-M Long Blade UltraWiz® UltraOne Standard Knife Kit Quick release by lifting lever 3005-K for unlimited blade adjustments and changing without the use of tools. Unique single set screw design May be used for easy "blade chasing". Heavy duty cable pull attachment It is designed using OSHA’s Ergonomic ✷ Kit includes 1002-M Long Blade Guidelines for Selecting Hand Tools. UltraWiz® ✷ Kit includes 1002-M Long Blade Stubby Coldknife 3003-K 3007-K 3008-K Use on vehicles with ladder racks and camper overhangs. ✷ Kit includes 1002-M Long Blade Replacement Parts for the 3000 Series Bolt and Bushing Kit Nut, Bolt and Bushing Kit UltraWiz® 3178-RB 3035-RB UltraThin Lever Knife with Pull Cable Pull Cable Pull Cable 3178-RC 3035-RC 3008-K 11/4" wide x 3/4" high Foam Pull Covers (2) Foam Handle Cover 3178-RG 3035-RF Bolt, Bushing and Bolt, Bushing, Nut Pull Cable Kit and Pull Cable Kit 3178-RK 3035-RK The UltraThin Lever Knife 3008-K has been slimmed down ® UltraWiz Knives from the 3007-K for a new feel and The 2000 Series fit in your hand.
Recommended publications
  • Chapter Seven Study Questions
    Chapter Seven Study Questions 2. Synonyms 1) change, alter, vary, modify mean to make or become different. Change implies making either an essential difference often amounting to a loss of original identity or a substitution of one thing for another <changed the shirt for a larger size>. Alter implies the making of a difference in some particular respect without suggesting loss of identity <slightly altered the original design>. Vary stresses a breaking away from sameness, duplication, or exact repetition <you can vary the speed of the conveyor belt>. Modify suggests a difference that limits, restricts, or adapts to a new purpose <modified the building for use by the handicapped>. 2) hate, detest, abhor, abominate, loathe mean to feel strong aversion or intense dislike for. Hate implies an emotional aversion often coupled with enmity or malice <hated his former friend with a passion>. Detest implies violent antipathy or dislike, but without active hostility or malevolence <I detest moral cowards>. Abhor implies a deep, often shuddering repugnance from or as if from fear or terror <child abuse is a crime abhorred by all>. Abominate suggests strong detestation and often moral condemnation <virtually every society abominates incest>. Loathe implies utter disgust and intolerance <loathed self-appointed moral guardians>. 3) repugnant, repellent, abhorrent, distasteful, obnoxious, invidious mean so unlikable as to arouse antagonism or aversion. Repugnant applies to something that is so alien to one’s ideas, principles, tastes as to arouse resistance or loathing <regards boxing as a repugnant sport>. Repellent suggests a generally forbidding or unpleasant quality that causes one to back away <the public display of grief was repellent to her>.
    [Show full text]
  • Gateways to Conservation II: Grades
    Gateways to Conservation II an environmental education curriculum for students in grades 6 –8 Gateways to Conservation II an environmental education curriculum for students in grades 6-8 © Audubon 2004 SECTION TITLE i Acknowledgements e appreciate the cooperation with the National Park Service's Chesapeake Bay Gateways Network Wto make the second volume of this curriculum possible. Numerous volunteers of Pickering Creek Audubon Center and teachers throughout Talbot County donated their time for this effort including: Lisa Donmoyer, Julie Harp, Mary Johnson, Janet Krones, Erney Maher, Myra McPherson, John Melton, Susan Pritchard and Jane Whitelock. The following current and past staff members of Pickering Creek Audubon Center helped create the lessons contained in this book: Stephanie Colvard, Kristen Facente, Shannon Gordon, E.B. James, Sarah Krones, Erin Poor, Kate Rogers, Mark Scallion, and Brit Slattery. Project Leader: Shannon Gordon Center Director: Mark Scallion Photographs by: Royce Ball, David Godfrey, Lindsey Goodwick, Andrew Gordon, David Menke, Susanna Scallion, Hugh Simmons, and U.S. Fish and Wildlife Service Illustrations of Maryland fossils courtesy of James Reger, Maryland Geological Survey Layout by: Linda Rapp/Ecoprint Printed on 30% post-consumer waste paper, using wind energy and carbon neutral production methods. Pickering Creek Audubon Center is a Chesapeake Bay Gateways site—a place to explore and learn about the Chesapeake region. Visit this and other places in the Gateways Network to experience the Bay’s stories, culture, spirit and mystery. Learn about the Chesapeake Bay restoration effort and how you can contribute. Our well-being and the Bay’s health are interdependent. Visit www.baygateways.net for more information.
    [Show full text]
  • November 2017 Edition
    Volume XXXV No. 11 November 2017 Montreal, QC www.filipinostar.org Gender parity but little diversity in Plante's executive comIntemrim oppiostitiotn leeader e Lionel Perez says partisanship prevailed, calling it broken electoral promise CBC News Posted: Nov 20, 2017 6:30 AM ET Last Updated: Nov 20, 2017 5:32 PM ET During the election campaign, Valérie Plante promised her executive committee would feature gender parity, diversity, and even a place for some members of the opposition. But Montreal's newly elected mayor did not hit all those targets in revealing members her 13-person executive committee this morning. There are seven men and six women, including Plante. There are not, however, any visible minorities. "It's a shortcoming, clearly, the [lack] of cultural diversity, in the city council in general," Plante said, pointing out that while visible minorities make up 30 per cent of the Montreal Mayor Valérie Plante stands with the 12 members of her executive committee Monday morning. All but one See page 4 Plante’s Executive are members of her party, Projet Montréal. (Lauren McCallum/CBC) Prince Harry to marry Meghan Markle at PWalacienaiddes poredrict Ca ‘haapspy tchluerch wienddinMg’ aat Sy t George’s Chapel for prince, 33, and American TV star, 36 (From The Guardian) Prince Harry and the church service, the music, the Meghan Markle are to marry at St flowers and the reception. George’s Chapel at Windsor Castle Wider security costs, policing next May and will go on their first public and public order arrangements will be walkabout on Friday in Nottingham, the covered by the public purse, however.
    [Show full text]
  • How to Sharpen a Kitchen Knife with a Handheld Knife Sharpener 3-27-21
    How To Sharpen a Kitchen Knife with a Handheld Knife Sharpener 2 sharpening stages 1 stage sharpener (knife sharpening with a (knife sharpening with a ! 2 stage sharpener) 1 stage sharpener) HOW TO KNOW WHEN TO SHARPEN A KITCHEN KNIFE: For safety’s sake, sharpen any kitchen knife as soon as you notice it start to lose its edge. You’ll see for yourself that a knife has lost its sharp edge when the knife blade starts to crush or tear (left photo, top of next page) instead of slice neatly (right photo, top of next page) through food. Sharpening a knife that’s still relatively sharp takes a lot less effort and time than sharpening a knife with an edge that has gotten as dull as a butter knife. www.gotta-eat.com How To Sharpen a Kitchen Knife with a Handheld Sharpener !2 a dull blade crushes a sharp blade and tears through cuts neatly food through food Dull Knife Sharp Knife ! Needed Kitchen Knife (these directions will show how to sharpen both a short and long bladed kitchen knife) Handheld Sharpener (what you see below are only two examples of handheld sharpeners – how to use both is shown in the following directions) 2 stage sharpener 1 stage sharpener ! www.gotta-eat.com How To Sharpen a Kitchen Knife with a Handheld Sharpener !3 1. Hold the knife comfortably in your hand as if you were going to cut with it as shown below whether you’re using a long bladed (left photo) or short bladed knife (right photo) below.
    [Show full text]
  • Are Functional Accounts of Goodness Relativist? David E.W
    University of North Florida UNF Digital Commons Philosophy Faculty Publications Department of Philosophy Fall 1994 Are Functional Accounts of Goodness Relativist? David E.W. Fenner University of North Florida, [email protected] Follow this and additional works at: http://digitalcommons.unf.edu/aphi_facpub Part of the Philosophy Commons Recommended Citation Fenner, David E.W., "Are Functional Accounts of Goodness Relativist?" (1994). Philosophy Faculty Publications. 1. http://digitalcommons.unf.edu/aphi_facpub/1 This Article is brought to you for free and open access by the Department of Philosophy at UNF Digital Commons. It has been accepted for inclusion in Philosophy Faculty Publications by an authorized administrator of UNF Digital Commons. For more information, please contact Digital Projects. © Fall 1994 All Rights Reserved Reason Papers Are Functional Accounts of Goodness Relativist? David E.W. Fenner, University of North Florida The short answer, which will no doubt fmstrate those who read to find the short answer, is yes and no. Yes in respect of the fact that all agents are not the same and so what is good for (or judged good by) one agent may be different from what is good for another agent. No in respect of the fact that normativity, or standards which range over agents relevantly similar, is still quite present. The point of this paper will be to unpack this position. I want to begin by talking about functional accounts of goodness. Credit for their origination is owed to ~ristotle.'However, I mean less to write about Aristotle and more about functional accounts themselves. My first attempt at such an account is the following: (Al) X is good if X is a highly functioning one of its kind.
    [Show full text]
  • Cutlery, Barware/ Holloware, Accessories & Chef's Knives
    Cutlery, Barware/ Holloware, Accessories & Chef’s Knives Contents Robert Welch 4 Folio 80 Cutlery .............................. 8 Cutlery .............................. 80 Ammonite ........................... 10 Whitfield ............................. 82 * Arden ................................. 12 Carolyn .............................. 83 * Ashbury .............................. 14 Logan ................................. 84 * Baguette ............................. 16 * Hartman ............................. 85 * Bergen ............................... 18 Alison ................................. 86 * Bourton .............................. 20 Bryce .................................. 87 * Bud .................................... 22 * Pirouette ............................. 87 * Contour Noir ....................... 24 * Deta ................................... 26 Hidcote .............................. 28 Varick 88 Honeybourne ...................... 30 * Cutlery .............................. 88 Iona ................................... 32 * Avery .................................. 90 * Kingham ............................. 34 * Estate ................................. 91 * Malvern .............................. 36 * Marnee............................... 92 * Norton ............................... 38 Avina .................................. 93 * Palm ................................... 40 Distressed Briar ................... 94 * Quinton .............................. 42 Fulton Vintage Copper ......... 95 * Radford .............................
    [Show full text]
  • Knewslettter
    KNIFEOKCA 39th Annual SHOW • April 12-13 Lane Events Center EXHIBIT HALL • Eugene, Oregon April 2014 Our international membership is happily involved with “Anything that goes ‘cut’!” YOU ARE INVITED TO THE OKCA 39th ANNUAL KNIFE SHOW & SALE April 12 - 13 * Lane Events Center & Fairgrounds, Eugene, Oregon In the super large EXHIBIT HALL. Now 360 Tables! ELCOME to the Oregon Knife Collectors demonstrations on Saturday. This year we have Anyone can enter to bid in the Silent Auction. See WAssociation Special Show Knewslettter. Blade Forging, Flint Knapping, quality Kitchen the display cases at the Club table to make a bid On Saturday, April 12, and Sunday, April 13, we Cutlery seminar, Knife Handle Designs, Martial on some extra special knives . want to welcome you and your friends and family Arts, Scrimshaw, Self Defense and Sharpening Along the side walls, we will have twenty to the famous and spectacular OREGON KNIFE Knives. three MUSEUM QUALITY KNIFE AND SHOW & SALE. Now the Largest organizational Don’t miss the FREE knife identifi cation and CUTLERY COLLECTIONS ON DISPLAY for Knife Show East & West of the Mississippi River. appraisal by Tommy Clark from Marion, VA your enjoyment and education, in addition to our The OREGON KNIFE SHOW happens just (Table N01) - Mark Zalesky from Knoxville TN hundreds of tables of hand-made, factory and once a year, at the Lane Events Center EXHIBIT (Table N02) and Mike Silvey on military knives antique knives for sale. Now 360 tables! When HALL, 796 West 13th Avenue in Eugene, Oregon. is from Pollock Pines CA (Table J14).
    [Show full text]
  • Consumer Decision Making Skill-A-Thon Food & Cooking ID
    Consumer Decision Making Skill-a-thon Food & Cooking ID Answer Sheet Appliances _____ Meat Platter _____ Chopsticks _____ Air Fryer _____ Napkin Ring _____ Citrus Reamer _____ Blender _____ Parfait Cup _____ Decorative Slicer-Ripple _____ Electric Pressure Cooker _____ Pepper Mill _____ Egg Separator _____ Food Processor _____ Punch Bowl _____ Egg Slicer _____ Ice Cream Maker _____ Saucer _____ Egg Timer _____ Immersion Blender _____ Tea Pot _____ Fat Separator _____ Mixer, Countertop _____ Flour Sifter _____ Mixer-Hand Spices/Foods _____ Garlic Press _____ Rice Cooker _____ Allspice _____ Grater _____ Skillet, Electric _____ Anise _____ Grill Brush _____ Slow Cooker _____ Basil _____ Herb Scissors _____ Tea Kettle _____ Bay Leaves _____ Kitchen Fork _____ Toaster _____ Bulgar _____ Liquid Measuring Cup _____ Toaster Oven _____ Chives _____ Mandolin Slicer _____ Turkey Fryer _____ Cilantro _____ Measuring Cups _____ Waffle Iron _____ Cinnamon _____ Measuring Spoons _____ Cloves _____ Meat Tenderizer Cookware _____ Couscous _____ Melon Baller _____ Baking Pan _____ Cumin _____ Mezzaluna _____ Baking Sheet _____ Curry Powder _____ Mixing Bowl _____ Broiler Pan _____ Dill _____ Molcajete _____ Colander _____ Garlic _____ Nut Chopper _____ Double Boiler _____ Ginger _____ Paring Knife _____ Dutch Oven _____ Mace _____ Pasta Measurer _____ French Press _____ Mustard _____ Pasta Server _____ Frying Pan _____ Nutmeg _____ Pastry Blender _____ Pastry Press _____ Oregano _____ Pastry Brush _____ Pie Plate _____ Paprika _____ Pie/Cake Server _____
    [Show full text]
  • 05.Sam Rockwell.Lyt 3/9/07 7:14 PM Page 3 ID #6 05.Sam#62 Rockwell.Lyt 3/9/07 7:14 PM Page 4
    05.Sam#60 Rockwell.lyt 3/9/07 7:13 PM Page 2 05.Sam Rockwell.lyt 3/9/07 7:14 PM Page 3 ID #6 05.Sam#62 Rockwell.lyt 3/9/07 7:14 PM Page 4 T h e re ’s make - b e l i eve, and then there is making someone believe. Sam Ro c k well is a pra c t i t i oner of the fo rmer and a virtuoso at the lat t e r. In his powe r, even the most mundane objects can become animated, even life- t h r e at e n i n g. Ta ke the butter knife. A few seconds ag o, it was being a bu t t e r k n i f e, spreading cholesterol on a piece of toast. Then Ro ck well decided he wanted to use it to illustrate kali, the Filipino fighting style Matt Damon uses in The Bourne Identity by wh i ch the enemy is slow ly and painfully torn ap a rt. A sudden light fli ck of the wrist and—wat ch out!—it is a bl o o d - seeking shiv that ’s coming terr i f y i n g ly close to your wrist. H aving spent 36 ye a rs on planet Earth, Ro ck well knows all kinds of d e- fense move s. If he were to be mu gged today after breakfast at Life Café in N ew York City’s East Vi l l ag e, he would have a plan of at t a ck.
    [Show full text]
  • Robert Welch Designs We’Ve Been Considering the Diner for Over 60 Years, Perfecting That first Point of Contact Between Diner and Food
    The comfort and feel of cutlery is a major part of the dining experience. At Robert Welch Designs we’ve been considering the diner for over 60 years, perfecting that first point of contact between diner and food. We create beautiful products that let customers focus on what matters most – enjoying the best culinary experience at your restaurant. 02 03 An exquisitely crafted knife cuts effortlessly through a succulent steak. 04 05 A perfectly weighted fork twirls spaghetti with ease. 06 07 An elegant spoon fits perfectly in hand as dessert is savoured. 08 09 Contents Our Cutlery Collections To The Table 12 68 Gourmet Dining 69 Baguette Vintage 16 Afternoon Tea 70 * Bergen 18 Buffet and Serving 71 Cheese and Fruit Platter Robert Welch Designs’ spoons and forks are made using the highest quality 18/10 stainless steel. Bourton 20 Specially hardened stainless steel provides our knife blades with the finest cutting edge. Hidcote 22 72 The Individual Touch 24 74 Raising the Bar Three distinct categories exist within the Robert Welch Designs Cutlery Collection. Kingham Malvern 26 76 Time for Tea * Quinton 28 78 Keep it Flowing Trattoria 30 80 At your Service 82 Flavour with Flair Arden 32 84 Table Accents Bud 34 Deta 36 88 Chefs’ Arena Honeybourne 38 90 Technical Specification Iona 40 91 Manufacturing Process Norton 42 92 Chef’s Knives Collection 3.5 Collection 5.0 Master Collection Palm 44 93 Santoku Knives All patterns are made from All ranges feature For customers who want Radford 46 94 Prep Knives 3.5mm stainless steel, a exceptional balance something special: Our RW2 50 95 Steak and Pizza Knives slightly thinner gauge that and comfort and are a highest levels of design and 96 Carving Knives and Forks gives this collection a lighter heavier gauge – a quality manufacture expertise, to * Skye 52 97 feel in the hand.
    [Show full text]
  • Donations to and Purchases for the Museum, 1978-80
    Donations to and Purchases for the Museum, 1978-80 1978-9 Donations 1 Finds from the Island of Coll, including pebble 'limpet-hammers', flints, sherds of beaker, iron- lated an r e potteryag hammerstond an , e from Sorisdale (NM 273638); beake latd ean r iron r medievao e ag l sherds from Cornai 243633M g(N ; 235627 Cornaigmord )an 244832)M e(N ; r lateo iroe r nag sherd Achaidn sa froFealn 149550)n 183545M M mBe Du (N h l(N d an ). By J CRAWFORD, Edinburgh. 2 Flint flakes from Allt Locha Ceardacha nn , Loch 755686)ShieM (N l Dahd ,an l House, Polloch, Glen Finnan, Fort William, Inverness-shir 788683)M e(N . Sherds, possibly dark age, from Loch Mudle, Ardnamurchan, Argyl 549661)M l(N . Norse grass-tempered sherd medievad san l sherds from Freswick Links, Caithness. Flint flakes, sherd f hand-madso e pottery; sherdf so stoneware bronza f o n e pi ;brooch , (medieva r later)o l Charleo tw ; I s'Stirling ' turnerd san other objects from Achnahaird Sands, Achiltibuie, Wester Ross (NC 016131). By J E KTRBY, Polloch. 3 Chert and flint flakes from near the standing stone (c NT 139354), near Drumelzier, Peebles. By Mr and Mrs R HurcmsoN, Peebles. 4 Part of a stone axe from Traprain Law, East Lothian; a socket stone from Kaimes Hill, Mid- lothian. Sherd Norsf so e grass-tempered pottery from Freswick Sands, Robert's Haven, John O'Groat Hunad san , John O'Groats, Caithness fragmento ;tw steatitf so e vessels from Freswick MURRAYS Sands R y B .
    [Show full text]
  • Collection 2014/2015
    COLLECTION 2014/2015 Contents TABLEWARE 5 Grand Cru Soft 6 Grand Cru 20 Grand Cru Outdoor 44 KITCHENWARE 49 Melamine 50 Bamboo 52 Knives 54 Oven-proof dishes 56 Grinders & accessories 62 Storage 64 HOMEWARE 67 Filigran 68 Saga 73 Grand Cru 74 TABLEWARE 7 Grand Cru Soft – for a relaxed everyday meal or for full course dinners. Set the scene in limitless ways by settinG the table with the Grand Cru Soft porcelain and Glass collection, introducinG soft curves to every meal from breakfast to a dinner for Guests. In its brilliant white porcelain version, the ripples stand out even more, while the soft curves of the plates, cutlery, bowls, tumblers and cups gently envelop the occasion, calling attention to what it’s really all about, namely, food and drinks. 8 With its soft curves, the Soft desiGn ensures a perfect Grip for hot drinks, and in true café style, the cup is available in two sizes: 22 cl for black “Americano” coffee and a larGer cup for “latte” and “chai” people, who can’t get by without their milk. The half-litre milk juG holds plenty of milk for several cups, perhaps with a little cane suGar added from the new suGar bowl, which is, naturally, just the thinG for chocolates and other sweet treats, too. For THE COFFEE TABLE For THE HOME BARISTA BrewinG coffee has almost become a complete science. There are so many thinGs that Go into the taste of a cup of coffee. For the practiced barista, it’s about how finely the beans are Ground, the water temperature, the amount of time the coffee is in contact with the water, and many other factors.
    [Show full text]