Digital Signal Processing Applied to the Modernization of Polish Navy Sonars
Total Page:16
File Type:pdf, Size:1020Kb
POLISH MARITIME RESEARCH 2(82) 2014 Vol 21; pp. 65-75 10.2478/pomr-2014-0021 Digital signal processing applied to the modernization of Polish Navy sonars Jacek Marszal, Ph.D. Gdansk University of Technology, Poland ABSTRACT The article presents the equipment and digital signal processing methods used for modernizing the Polish Navy’s sonars. With the rapid advancement of electronic technologies and digital signal processing methods, electronic systems, including sonars, become obsolete very quickly. In the late 1990s a team of researchers of the Department of Marine Electronics Systems, Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, began work on modernizing existing sonar systems for the Polish Navy. As part of the effort, a methodology of sonar modernization was implemented involving a complete replacement of existing electronic components with newly designed ones by using bespoke systems and methods of digital signal processing. Large and expensive systems of ultrasound transducers and their dipping and stabilisation systems underwent necessary repairs but were otherwise left unchanged. As a result, between 2001 and 2014 the Gdansk University of Technology helped to modernize 30 sonars of different types. Keywords: sonar; anti-submarine warfare; mine countermeasure; digital signal processing INTRODUCTION modernization set the scene for more modernization of the Polish Navy’s sonar systems. One of the main tasks of the Navy is to track submarines In summary, between 2001 and 2014 the Gdansk University (Anti-Submarine Warfare -ASW) and search for and destroy of Technology team modernized the total of 30 sonars of naval mines (Mine Counter-Measure - MCM) [7]. This is done different types (dipping, towed array, hull-mounted with flat by specialised ships equipped with sonar systems. Submarines or cylindrical array, side scan) including 13 in ASW class and are tracked by using long-range low frequency sonars. ASW 17 in MCM class [28, 32, 37]. tasks are also performed by helicopters equipped with dipping sonar and sonobuoy systems [7]. Naval mines are searched APPLICATION OF NEW TECHNOLOGIES for and destroyed by minesweepers and destroyers using high resolution short range sonar [7]. With the rapid advancement Modernized at the Gdansk University of Technology, the of electronic technologies and digital signal processing sonar systems operated by the Polish Navy were originally methods, electronic systems, including sonars which are built in the 1970s and 1980s. The majority were Soviet designs a key element of ASW and MCM ships, become obsolete very built entirely in analogue technology, even with some of the quickly. While the problem affects a number of countries, it transmitting equipment using high-power electron tubes. is most severe for countries which cannot afford frequent Following Poland’s accession to NATO, the Polish Navy upgrades of their military equipment. In the first decade of received two US Oliver Hazard Perry class frigates, built in this century the Polish Navy was operating ships which were 1978 and 1980. Even though the frigates’ sonars were made built in the 1970s and 1980s. In view of this, in the late 1990s in digital technology, it was the technology of the 1970s with the Department of Marine Electronics Systems, Faculty of sonars started by reading perforated tape and with signal Electronics, Telecommunications and Informatics, Gdansk processing computers for towed array sonar occupying entire University of Technology, launched a project designed to fairly large cabins. modernize helicopter on-board anti-submarine warfare systems The main objective of the modernization was to design, [48, 49]. The result was a modernized sonobuoy system with build and replace all electronic systems and use modern digital a new acoustic analyzer. Thanks to digital signal processing, systems in place of analogue or obsolete digital technology. the analyser can carry out spectral analysis of submarine- The new equipment takes up significantly less space and generated noise. The second helicopter ASW system to be uses significantly less power. Fig. 1 shows an example of the modernized was dipping sonar OKA-2M/Z [27, 50]. Following technology change in the case of the MG-89 sonar operator its successful qualification test results in 2001, the OKA-2M/Z console. POLISH MARITIME RESEARCH, No 2/2014 65 Fig. 1. Operator console of the MG-89 sonar before and after modernization DIGITAL SIGNAL PROCESSING IN type signals, through “chirp” signals with linear (LFM) or MODERNIZED SONARS hyperbolic (HFM) frequency modulation to any combination of the two. The world’s first sonar using digital signal processing (DSP) The method was applied in all of the sonars modernized was developed in 1960 [47]. Since then digital signal processing at the Gdansk University of Technology for generating new methods have been continuously improved to keep up with the broadband sounding signals. demands of the new developments [5, 6, 10, 15, 16, 41, 54, 63]. Multi-beam systems, which also use Rotational Directional Equipped with digital signal processing, sonars are now capable Transmission (RDT) at the transmitting end, have to generate of delivering a wide range of new functions which were not a number of simultaneous signals with phase shifts changing available or difficult to achieve in the analogue technology or over time. The modernized MG-89DSP sonar uses multi- early digital technology, respectively. This applies in particular channel systems with multiple DDS systems. Thanks to the to the generation of sounding signals, beam-forming, pulse features of DDS, the shape of sounding pulses can now be compression, filtration, detection and imaging of echo signals. optimized and helps to minimize the level of sounding signal The widespread use of sonars with multi-element ultrasonic side lobes, an effect which traditional technologies cannot transducers raises the bar for DSP processors in sonars even possibly achieve [51]. more than for DSP processors used in radar. The modernization conducted at the Gdansk University of Analogue - to - digital conversion in sonar systems Technology involved not only the design and construction of entirely new systems using cutting-edge electronic technology, Once received by a multi-element ultrasonic transducer, but also the use of broadband soundings signals and modern echo signals of the modernized sonars are passed on to a multi- methods of digital signal processing. Although a number of channel receiver for pre-processing. Signal pre-processing is the methods can be found in the literature, some of them had conducted in the input analogue part of the receiver to ensure to be adapted to the specific parameters of the equipment. Part filtration and gain and to reduce the dynamics by applying of the modernization at the Gdansk University of Technology time variable gain (TVG) [31]. Following this, echo signals included the development of new signal processing algorithms undergo analogue - to - digital conversion in the multi-channel which are extensively described in many publications [11, 13, A/D converter to be then sent to specialized DSP processors. 20, 21, 22, 25, 26, 29, 30, 45, 48, 49, 50, 51, 52, 53, 54]. The process of analogue - to - digital conversion conducted in The design of modern sonar systems requires transducer sonar systems must meet a number of conditions. Because the equipment to generate broadband sounding signals and receiver signals will be processed subsequent to the sampling for the equipment to use sophisticated methods of digital echo signal purpose of time and space filtration, all channel sampling must processing. be done synchronously in the same moments of time. To ensure the accurate timing of sampling, a number of independent Generating sounding signals by using DDS converters are used rather than a single converter with input multiplexer, a common solution in other applications [46, Direct Digital Synthesis (DDS) [3, 4] is a modern digital 57]. The accuracy of the process depends on the input signal method for generating arbitrary signals. A DDS integrated staying constant throughout the conversion time. The traditional circuit includes a control microprocessor, quartz frequency approach is to use sample-hold systems but the more recent generator, programmable counter, Digital to Analogue solutions use charge redistribution successive approximation Converter (DAC) and output analogue filter. When used in analogue - to - digital converters. The converters are based on sonar transmitters, DDS offers new unlimited potential for the Switched-Capacitor Circuits technology. The sample-hold sounding signal generation, starting from the simple “ping” process is at the core of their operation [12, 24]. 66 POLISH MARITIME RESEARCH, No 2/2014 Quadrature sampling computational power was sufficient. As an example, the modernization of the helicopter on-board OKA sonar and When we sample narrow-band signals with the frequency the low frequency passive sonar with towed array SQR-19, band B centred around the mid-channel frequency f0, we can involved the use of Industrial Computers, based on generally significantly reduce the amount of data collected by using available processors. quadrature sampling, also known in the literature as second- In the case of modernizing active multi-beam sonars order sampling or IQ sampling (In-phase and Quadrature-phase operating at higher frequencies, the Department of Marine Sampling) [2, 8]. The quadrature sampling involves