DOCSLIB.ORG

Technical Drawing

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Technical Drawing technical drawing school of art, design and architecture nust – spring 2011 Objective abstraction - axonometric view technical drawing introduction what is a planometric/oblique plan drawing? An planometric drawing is an angled drawing in which the horizontal lines are drawn at 45-45 degree or 30-60 degree angle and the vertical lines are left straight. As a result, an axonometric drawing is simply a picture of an object viewed at an angle. Intro to technical drawing planometric view technical drawing introduction Drawing oblique plan drawing Planometric: the base and top of the object retain their true shape, but are drawn on an angle so that both sides recede at 45 degrees (or one side recedes at 30 degrees and the other at 45 45 60 degrees). Intro to technical drawing planometric view technical drawing introduction Components of a planometric drawing vertical axis angular lines 45 45 60 30 horizontal axis Intro to technical drawing planometric view technical drawing introduction How to draw an oblique plan drawing? In these drawings, the object's vertical lines are drawn vertically, and the horizontal lines in the width and depth planes are shown at 45 degrees or 30- 60 degrees to the horizontal. Intro to technical drawing planometric view technical drawing introduction How to draw an oblique plan drawing? y These three lines of the planometric axis represent the three primary dimensions of the object: width, height, and depth. x z Intro to technical drawing planometric view technical drawing introduction drawing plan in planometric plan 60 30 oblique plan elevation Intro to technical drawing planometric view technical drawing introduction Sketching planometric (at 45 degrees) Intro to technical drawing axonometric view technical drawing introduction Sketching planometric 45 degree right Intro to technical drawing axonometric view technical drawing introduction Sketching planometric 45 degree left Intro to technical drawing axonometric view technical drawing introduction Sketching planometric vertical Intro to technical drawing axonometric view technical drawing introduction Sketching planometric 45 degree left Intro to technical drawing axonometric view technical drawing introduction Sketching planometric vertical Intro to technical drawing axonometric view technical drawing introduction Sketching planometric 45 degree right Intro to technical drawing axonometric view technical drawing introduction Sketching planometric 45 degree left Intro to technical drawing axonometric view technical drawing introduction Sketching planometric 45 degree right Intro to technical drawing axonometric view technical drawing introduction Sketching planometric hidden lines Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching axonometric(at 45 degrees) Intro to technical drawing axonometric view technical drawing introduction Sketching planometric (at 30-60 angle) Intro to technical drawing axonometric view technical drawing introduction Sketching axonometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric Intro to technical drawing axonometric view technical drawing introduction Sketching planometric (at 30-60 angle) Intro to technical drawing axonometric view attention – assignment 8 Create an axonometric view Intro to technical drawing assignment technical drawing introduction Inspirational images Map in isometric view Intro to technical drawing isometric view technical drawing introduction Inspirational images Axonometric urbanism Intro to technical drawing isometric view technical drawing introduction quote of the day What is IN ME is greater than what is happening TO ME." Sheye Hassan Intro to technical drawing sada, spring 2010 technical drawing introduction building of the day Solar arc, Japan Intro to technical drawing sada, spring 2010 technical drawing introduction video of the day [can you draw? Part 8] http://www.youtube.com/watch?v=k3OiaEayouc&feature=related Intro to technical drawing sada, spring 2010 http://www.youtube.com/watch?v=rN2g_7wEr4M&feature=related Intro to technical drawing sada, spring 2010.
Load more

Recommended publications
  • Axonometric (Isometric Projection)
    AXONOMETRIC (ISOMETRIC PROJECTION) Representation Systems Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Elevation Profile Plan Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Isometric Into the ISOMETRIC PERSPECTIVE, the isometric axes form a 120º angle between one another Front View Technical Drawing Name and Surname: Axonometric System Draw the AXONOMETRIC PERSPECTIVE of these pieces.
    [Show full text]
  • 'The "Perfyt Scyens" of the Map; a Study of the Meaning and Interpretation of Local Maps in Early Tudor England 1509-1547'
    'The "Perfyt Scyens" of the Map; a Study of the Meaning and Interpretation of Local Maps in Early Tudor England 1509-1547' Lewis John Kaye Roberts Queen Mary, University of London 70,056 words (excluding bibliography) This work was supported by the AHRC (BGP award reference: 0673) A thesis submitted in fulfilment of the requirements for the degree of Doctor of Philosophy, University of London 1 Statement of Originality. I, Lewis Roberts, confirm that the research included within this thesis is my own work or that where it has been carried out in collaboration with, or supported by others, that this is duly acknowledged below and my contribution indicated. Previously published material is also acknowledged below. I attest that I have exercised reasonable care to ensure that the work is original, and does not to the best of my knowledge break any UK law, infringe any third party’s copyright or other Intellectual Property Right, or contain any confidential material. I accept that the College has the right to use plagiarism detection software to check the electronic version of the thesis. I confirm that this thesis has not been previously submitted for the award of a degree by this or any other university. The copyright of this thesis rests with the author and no quotation from it or information derived from it may be published without the prior written consent of the author. Signature: Date: 16th January 2014 2 Abstract. This thesis begins by examining an unexplored contextual background for sixteenth century local maps. It argues that the architectural drawing techniques developed by master masons in the late twelfth century continued to be taught to the King’s masons well into the sixteenth, and that these drawing techniques lie behind the innovations in sixteenth century topographical mapping.
    [Show full text]
  • Identifying Robust Plans Through Plan Diagram Reduction
    Identifying Robust Plans through Plan Diagram Reduction ∗ Harish D. Pooja N. Darera Jayant R. Haritsa Database Systems Lab, SERC/CSA Indian Institute of Science, Bangalore 560012, INDIA ABSTRACT tary and conceptually different approach, which we consider in this Estimates of predicate selectivities by database query optimizers paper, is to identify robust plans that are relatively less sensitive to often differ significantly from those actually encountered during such selectivity errors. In a nutshell, to “aim for resistance, rather query execution, leading to poor plan choices and inflated response than cure”, by identifying plans that provide comparatively good times. In this paper, we investigate mitigating this problem by performance over large regions of the selectivity space. Such plan replacing selectivity error-sensitive plan choices with alternative choices are especially important for industrial workloads where plans that provide robust performance. Our approach is based on global stability is as much a concern as local optimality [18]. the recent observation that even the complex and dense “plan di- Over the last decade, a variety of strategies have been proposed agrams” associated with industrial-strength optimizers can be ef- to identify robust plans, including the Least Expected Cost [6, 8], ficiently reduced to “anorexic” equivalents featuring only a few Robust Cardinality Estimation [2] and Rio [3, 4] approaches. These plans, without materially impacting query processing quality. techniques provide novel and elegant formulations (summarized in Extensive experimentation with a rich set of TPC-H and TPC- Section 6), but have to contend with the following issues: DS-based query templates in a variety of database environments Firstly, they are intrusive requiring, to varying degrees, modifi- indicate that plan diagram reduction typically retains plans that are cations to the optimizer engine.
    [Show full text]
  • Basic Engineering Drawings
    Today’s Thoughts The thing that’s so wonderful about using beautiful, appropriate [CAD] tools is that they become an extension of you, your body, you fingertips, and your mind. They get out of the way and let you directly interact with the problem you are solving. Everyone’s tried to remove a screw without a screwdriver; a task quickly becomes impossible that otherwise would be trivial. — Luke Crawford Here is one of the few effective keys to the design problem — the ability of the designer to recognize as many of the constraints as possible — his willingness and enthusiasm for working within these constraints. Constraints of price, of size, of strength, of balance, of surface, of time and so forth. — Charles Eames Section Views ME 172 Outline • Full Section • Half Section • Offset Section • Broken-out Section • Revolved Section • Removed Section • Sectioning Problems • Sectioning Quiz A Section View Technical Drawing– by Giesecke Visualizing a Section View Technical Drawing– by Giesecke Visualizing a Section View Technical Drawing– by Giesecke A Cut Plane Line Technical Drawing– by Giesecke Full Section View Blueprint Reading Basics – by Warren Hammer Full Section View Technical Drawing– by Giesecke Correct Full Section View Technical Drawing– by Giesecke Correct Full Section View Technical Drawing– by Giesecke Correct Full Section View Technical Drawing– by Giesecke Sectioning Symbols Technical Drawing– by Giesecke Correct Sectioning Lines Technical Drawing– by Giesecke ProblemAligned Full with Section a Full Section Blueprint Reading
    [Show full text]
  • Drawing the “Boundaries”, the Start of an Urban Planning Project
    Geographia Technica, Vol. 12, Issue 2, 2017, pp 73 to 81 DRAWING THE “BOUNDARIES”, THE START OF AN URBAN PLANNING PROJECT Jordi GOMIS1, Carlos TURÓN DOI: 10.21163/GT_2017.122.07 ABSTRACT: The graphic representation of the boundaries of urban planning areas is a sufficiently important element of the representation of urban planning as not to allow the slightest hint of doubt or imprecision to arise in regard to the dividing lines it indicates. It can include everything from the growth limit of the urban land as a whole to small inner areas of the city subject to improvement, renovation or change of planning conditions. It is this first concept that the town planner must include/draw on his working plan to begin his task. Throughout the history of urban planning, this first “boundary” has been represented in various ways using different graphic and/or visual mechanisms. This article presents a journey through the history of the resources used by technicians for their representation and their evolution. Key-words: Graphic representation, Technical drawing, Urban Planning, City drawing, Urbanism. 1. INTRODUCTION The demarcation of geographical, territorial, municipal, regional, etc. areas has never been a problem dissociated from society. Since ancient times the specification of geographic boundaries and limits of influence has occupied and preoccupied people. “Boundaries” and “frontiers” have always given rise to disputes that people have attempted to resolve and settle, sometimes graphically, many others, unfortunately, through the use of force. Various inventories of land, people, property, crops, etc. were made ever since ancient times to inform kings and noblemen of the quantity and quality of their belongings and properties.
    [Show full text]
  • Recommended Drawing Numbering, Scales and Dimensioning 1 / 3
    Recommended Drawing Numbering, Scales and Dimensioning 1 / 3 Architectural Drawings: General: G101 Cover Sheet G102 General Information G201 Live Safety Plan Civil: C100 Site Topo Plan C200 Demolition Plan C300 Site Staking/Signing/Striping/Erosion Control Plan C400 Grading & Drainage Plan C500 Utility Plan Landscape: I‐1 Irrigation Plan I‐2 Irrigation Details L‐1 Landscape Plan L‐2 Landscape Details Architectural: AC01 Overall Architectural Site Plan AC02 Enlarged Architectural Site Plan AC03 Site Plan Details A001 Finish Schedule & Legend A002 Opening Schedule, Elevations A101 Floor Plan A102 Dimension Plan A103 Lower Roof Plan A104 Upper Roof Plan A105 Canopy Plan and Details A111 Enlarged Floor Plans A201 Exterior Elevations A201 Exterior Elevations A301 Building Sections A302 Building Sections A311 Wall Sections A312 Details – Curved Roof A313 Details – Curved Roof A316 Wall Partition Types A321 Plan Details A331 Section Details A332 Typical Details and Profiles A341 Roof Details A351 Interior Column Details A401 Interior Elevations A402 Interior Elevations A501 Reflected Ceiling Plan A601 Equipment Plan Recommended Drawing Numbering, Scales and Dimensioning 2 / 3 The recommendation scales* for key architectural drawings are as follows: Site plan – engineering scale 1:20 or similar, depend upon size of site Arch Floor Plan – 1/8” Arch Ceiling Plan – 1/8” Arch Roof Plan – 1/8” or 1/16” – (try to show roof as one drawing view) Interiors Floor Finish Plan – 1/8” Interiors Furniture Plan – 1/8” Enlarged Arch Floor Plans – ¼” or larger as needed (typically the toilet rooms) Arch Exterior Elevations – 1/8” Arch Building Section – ¼” or ½” if needed for a specialty area (ie lobby) Arch typical wall sections – ¾” Wall types (wall sections or plan views) – 1 ½” Details ‐ Plan and Section – 1 ½” or 3” Interior Elevations – ¼” or 3/8” as needed *Note: set up each drawing on a 42” x 30” page.
    [Show full text]
  • Axonometric Projection
    Axonometric Projection ARCH 1101 - Intro to Architecture Axonometric Projection Professor Christo Spring 2020 Semester AXONOMETRIC Axonometric projection is a type of orthographic projection used for creating a pictorial drawing of an object, where the lines of sight are perpendicular to the plane of projection, and the object is rotated around one or more of its axes to reveal multiple sides. Axonometric drawings do not have vanishing points as in a perspective drawing. Consequently, all lines on a common axis are draw as parallel. AXONOMETRIC ARCH 1101 - Intro to Architecture Axonometric Projection Professor Christo Spring 2020 Semester AXON BASICS We typically use either 45-45-90 degree or 30-60-90 degree projection. What is critical is that we maintain our 90 degree angle within the object we are projecting, and all angles add up to 180 degrees. This is convenient for us since we have 45-45-90 and 30-60-90 degree triangles. ELEVATION ELEVATION ELEVATION PLAN ELEVATION SIMPLE BOX ARCH 1101 - Intro to Architecture Axonometric Projection Professor Christo Spring 2020 Semester AXON CONSTRUCTION ELEVATION PLAN ROTATE PLAN PROJECT VERTICALS CONNECT VERTICALS LINE WEIGHTS ARCH 1101 - Intro to Architecture Axonometric Projection Professor Christo Spring 2020 Semester AXON CONSTRUCTION - NON-RECTANGULAR SHAPES ELEVATION PLAN IDENTIFY RECTANGLE ROTATE PLAN PROJECT VERTICALS CONNECT VERTICALS LINE WEIGHTS ARCH 1101 - Intro to Architecture Axonometric Projection Professor Christo Spring 2020 Semester AXON CONSTRUCTION - NON-RECTANGULAR SHAPES ELEVATION PLAN IDENTIFY RECTANGLE ROTATE PLAN PROJECT VERTICALS CONNECT VERTICALS LINE WEIGHTS ARCH 1101 - Intro to Architecture Axonometric Projection Professor Christo Spring 2020 Semester IN CLASS PRACTICE ARCH 1101 - Intro to Architecture Axonometric Projection Professor Christo Spring 2020 Semester.
    [Show full text]
  • How to Create a Site Plan Site Plan: a Drawing of a Property As Seen from Above, Including, but Not Limited to a North Arrow, Grand Tree Locations, and Date
    How to create a Site Plan Site Plan: A drawing of a property as seen from above, including, but not limited to a north arrow, grand tree locations, and date. Show proposed improvements with exact size, shape and location of all existing and proposed buildings and structures, parking areas, driveways, walkways and patios. 1 Use a Scale Choose a standard scale, either an Architectural or Engineering Scale and note the numeric scale used on plan (i.e. 1 inch = 20 feet). Draw Property Lines 2 Label all dimensions in feet. A plat of the neighborhood may help you in determining the dimensions of the parcel. This may be available Show the property lines from the RMC office of the county in and note the dimensions. which the property is located. Draw all Buildings and Structures on the Plan 3 • Show existing buildings and structures as a solid line and all additions as a dashed line. • Be sure to show the precise footprint of all buildings or structures including, but not limited to steps, decks, porches, fences, bay windows and HVAC platforms. Draw Driveway and Parking on the Plan 4 Show all parking areas, driveways, walkways and patios in their precise locations in relation to your property lines and with their accurate foot- print. Show proposed paved areas with a dashed line. Locate Grand Trees 5 • A Grand Tree is a tree with a diameter at 4 1/2 feet above grade that is 24 inches or greater. • Use a dot to indicate the precise location of the center of the tree.
    [Show full text]
  • Industrial Computer Graphics Technology
    Industrial Computer Graphics Technology About the ProgrAm The Industrial Computer Graphics PAy Technology program provides The median annual wage for students with career-based drafters was $56,830 in May 2019. training in mechanical design using computer-aided Job outlook drafting/design technology. Employment of drafters is To provide the necessary projected to grow 0 percent from technical education base, the 2018 to 2028. Although drafters program also includes education will continue to work on technical and training in applied technical mathematics, engineering, drawing, and drawings and documents related geometric dimensioning and tolerance skills. Basic training in computer to the design of buildings, machines, technology is included to prepare students for the two-dimensional, and tools, new software programs three-dimensional and solid modeling computer-aided design technology are changing the nature of drafting in the program. All technical manufacturing and engineering design in work and how it is done. Those today's high-technology business and industry uses computer-based, with formal training in this computer-aided design technologies that integrate the design, engineering technology should have the and manufacturing design analysis, and manufacturing of complex products best job opportunities. and product parts, subassemblies, and assemblies into a single, technically coherent process. Bureau of Labor Statistics, U.S. Department of Labor, Occupational Outlook Handbook, The Industrial Computer Graphics Technology program provides the skills April 2020, Drafters, on the Internet at http://www.bls.gov/ooh/architecture-and- and knowledge required for entry-level employment in industrial drafting, engineering/drafters.htm computer-aided drafting, and mechanical design fields. Emphasis is placed on the applications, procedures and techniques of principles involved in industrial drafting and design techniques.
    [Show full text]
  • Technical Drafting and Mental Visualization in Interior Architecture Education Ali Riza Arslan Ali Riza [email protected]
    International Journal for the Scholarship of Teaching and Learning Volume 11 | Number 2 Article 15 July 2017 Technical Drafting and Mental Visualization in Interior Architecture Education Ali Riza Arslan [email protected] Sibel Seda Dazkir Georgia Southern University, [email protected] Recommended Citation Arslan, Ali Riza and Dazkir, Sibel Seda (2017) "Technical Drafting and Mental Visualization in Interior Architecture Education," International Journal for the Scholarship of Teaching and Learning: Vol. 11: No. 2, Article 15. Available at: https://doi.org/10.20429/ijsotl.2017.110215 Technical Drafting and Mental Visualization in Interior Architecture Education Abstract We explored how beginning-level interior architecture students develop skills to create mental visualizations of three-dimensional objects and environments, how they develop their technical drawing skills, and whether or not physical and computer generated models aid this design process. We used interviews and observations to collect data. The findings provide an insight on what kind of difficulties students experience during their learning process and how they overcome those difficulties. The er sults of the study indicate that the students’ lack of skills in technical drawing and in creating 2D and 3D mental visualizations negatively influenced their design process. Using the existing body of literature, we discussed the findings and suggested teaching strategies to improve the learning process for the beginning-level interior architecture students. The findings of this study allowed us to have a better understanding of the student design and learning process. Keywords Interior architecture, interior design, technical drawing skills, mental visualization, computer aided design, architectural models IJ-SoTL, Vol. 11 [2017], No.
    [Show full text]
  • Program Information
    Engineering Technology – General Technology (Associate Degree in Applied Science) Program Start Date: Any Term Minimum Program Length: 74 academic weeks; 5 terms Curriculum Code: 35318 Program Description Students will major in computer aided design with a secondary specialty in electronics engineering technology with an electro-mechanical emphasis. Practical Experience Students gain experience in manufacturing processes, electronic circuits, and computer aided drafting. Professional Opportunities Drafter, CAD operator, print reader, engineering technician. Unique Aspects This program allows students to receive an associate degree with a primary specialty in computer aided design and secondary specialty in electronics engineering technology with electro-mechanical emphasis. This degree is non-transferable. EEDA Career Cluster: Transportation, Distribution & Logistics; Architecture & Construction; Manufacturing; Science, Technology, Engineering & Mathematics Course Requirements Credits Course Title Course Code 1 College Orientation COL 101 3 English Composition I ENG 101 3 Public Speaking SPC 205 3 College Algebra MAT 110 3 Humanities-Fine Arts General Education ART 101, ENG 201, 202, 205, 206, 208, 209, FRE 102, 201, 202, GER 102, MUS 105, PHI 101, 110, SPA 102, 201, 202, THE 101 3 Social/Behavioral Science General Education ANT 101, ECO 210, 211, GEO 101, 102, HIS 101, 102, 104, 105, 201, 202, PSC 201, 215, PSY 201, 203, 212, SOC 101, 102, 205 3 Architectural Computer Graphics I AET 111 3 Architectural Computer Graphics II AET 221 3
    [Show full text]
  • Architectural Drawing
    / 720 (07) 157 A v.8 H^Fecferal Housing AdSnfetrdtinw pt.l mm**#**'’ International Correspondence Schools, Scranton, Pa. r Architectural Drawing Prepared especially for home study By r WILLIAM S. LOWNDES, Ph. B., A.I.A. and FREDERICK FLETCHER, A.I.A. Registered Architect 5637 A-3 Part 1 Edition 3 6 Assignments International Correspondence Schools, Scranton, Pennsylvania International Correspondence Schools, Canadian, Ltd., Montreal, Canada (O^Si u U(j ARCHITECTURAL DRAWING V \/. Part 1 “The higher men climb, the longer their working day. And to keep at the top is harder, almost, than to get there. There are no 4office hours' for leaders." —Cardinal Gibbons % * WILLIAM S. LOWNDES, Ph.B., A.I.A. But for the man who has found the job he loves, work is and no longer “labor.” And learning more about that job be* FREDERICK FLETCHER, A.I.A. comes a thrilling, exciting adventure. Registered Architect 23 t Serial 5637A-3 : Copyright © 1962, 1954, 1951, 1943, by INTERNATIONAL TEXTBOOK COMPANY Copyright in Great Britain. All rights reserved. Printed in United States of America : International Correspondence Schoolsj r1 Scranton, Pennsylvania / ■ International Correspondence Schools Canadian, Ltd{ . Montreal, Canada 121 o 1(5 ARCHITECTURAL DRAWING Vv l PART 1 PI INTRODUCTION What This Text Covers . 1. Definition of Architectural Drawing.—Architectural 1. Introduction to Architectural Drawing .. Pages 1 to 12 drawing is the special language of the architect, which he uses Architectural drawing is the special language of the architect. to convey to his client impressions of how a contemplated build­ Various kinds of architectural drawings are explained. The use of ing will appear when completed.
    [Show full text]