KIT 2616 85261600200 ‘32 FORD HIGHBOY HOT ROD AND THE ORIGINAL BIG DEUCE 3`N 1
The 1932 Ford roadster is the paragon hot rod. on the smooth, dusty dry lakes above L.A. Why? Some reasons are strictly obvious, others are purely But after the War, the rapidly swelling throngs of new emotional. A few are completely illogical. First, you have to rodders latched onto the '32 Roadster (now obsolete itself), remember that 1932 was the depth of the recession in the as their car. Why? The roadster was the lightest, cheapest, United States. Most corporate types would not calculate this and (with fenders, lights, and windshield removed) by far the as the best time to introduce an all-new, low production run, most aerodynamic model in the early Ford line (remember low-cost "everyman's car" with styling queues echoing from that speed at the dry lakes depends as much on streamlin- high-class marquees like Lincolns and Duesenbergs, and--of ing as it does on power). The '32 was a bit bigger and wider all incredible things--the first assembly-line, low-cost, high- than the T's and A's, but it came with the V8 in place, and it volume-production V8 engine ever made. A young man's was sporty--a darn good-looking car, with or without fenders. auto sport that would one day be called hot rodding was Not only is the Deuce roadster the classic hot rod, already gaining a strong foothold in Southern California by this is a classic model kit. The Big Deuce followed closely this time, and you know their attention was riveted by this on the heels of the ground-breaking Big T, offered at the flashy new Ford and its unheard-of engine. This was, hands zenith of the model car hobby in the early '60’s (along with down, power to the people. a 1:1 counterpart of each by Darryl Starbird). It was a stun- Some might think that Henry Ford predestined the ner then, and is even more so now. All the crispness and '32 Ford to be a collector's classic. The smooth, rounded, exactness of those original dies and molds remain, but, fully body-color grille shell, the flowing body contours, and the reflecting the healthy diversity of rodding today, you can gentle, conforming body accent lines all broke trend from build this value-added kit in any number of styles, ranging the boxy, squared-up Model A. The "Deuce" was offered from the original '60s full-fendered, mag-wheeled version, to not only in the sporty roadster, but also in two completely a right-on '40s-'50s highboy with a full-dressed flathead, to different coupes, a couple of sedans, a classy phaeton, a a contemporary, throw-back "rat rod" version for which the jaunty Victoria, and even a drop-head version of this model multi-carb OHV V8 with open outside headers is perfect (and (B-400), among others. The most amazing part is that this the Mexican seat blanket is de rigueur. The Big Deuce was all-new line was offered for only one short year, with the done right by Monogram the first time around, and it's done V8 models not being introduced until halfway through it. even better in this impressive multi-build kit by successor By 1933, everything changed again (except the V8 engine, Revell-Monogram. Welcome which would last through 1953--as the hot rodders' favorite). back, Big Deuce. But, of all this, what the rodders saw was a relatively inexpensive, light, powerful new Ford that came with an Pat Ganahl unheard-of affordable V8 engine and a considerably more rugged (and good-looking) frame. Of course, the young Pat Ganahl has been the Editor of Street Rodder, Hot Rod, Rod & Custom, depression-era rodders couldn't afford new V8s at the time-- and Rodders Journal magazines. Pat created the Modellers Corner in Street Rodders magazine and is an avid model builder. they were still stripping down cast-off Model T's and hopping them up with obsolete race parts from the Teens to compete
The Big Deuce is dedicated to Roger Harney, without his continual support and dedication at Revell Monogram this kit would have not been possible i INFORMATION The `32 Ford Highboy Hot Rod instruction manual is version you prefer to build. Parts may be interchanged divided into three separate sections. Each section con- between different versions but it is strongly suggested only tains instructions for building a particular type of “Hot Rod” for the advanced model builder. Please read the instructions carefully and decide which
*OUVERTURE DE COUPURE * DECAL * ALTERNATIVE ASSEMBLY * CUT OPEN * DECAL COMANIE * ENSEMBLAGE ALTERNATIVE
* OPTIONAL PARTS * CEMENT TOGETHER * DO NOT CEMENT * PIECES EN OPTION * A COLLER * NE PAS COLLER
* REPEAT SEVERAL TIMES * REMOVE AND THROW AWAY * A REPETER PLUSIEURS FOIS * A RETIRER ET JETER
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER This paint guide is provided to complete this kit as shown on the box. * Study the assembly drawings. * Etudier les schémas de montage. * Each plastic part is identified by a number. * Chaque pièce en plastique est identifiée par un numéro. Ce guide de peinture est fourni pour reproduire le * In the assembly drawings, some parts will be * Sur les schémas de montage, certaines pièces sont modèle réduit qui apparaît sur la boîte. marked by a star (★) to indicate chrome marquées d'une étoile (★) pour indiquer qu'elles sont en plated plastic. plastique chromé. Aluminum Aluminum * For better paint and decal adhesion, wash * Pour une meilleure prise de la peinture et the plastic parts in a mild detergent solution. des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les Flat Black Noir mat Rinse and let air dry. laisser sécher à l'air. * Check the fit of each piece before cementing * Vérifier que chaque pièce s'ajuste bien avant de la coller in place. en place. Flat Medium Gray Grid moyen mat * Use only cement for polystyrene plastic. * N'utiliser que de la colle pour polystyrène. * Scrape plating and paint from areas to be * Gratter les parties à coller pour enlever le chrome et Flat Red Rouge mat cemented. la peinture. * Allow paint to dry thoroughly before * Laisser la peinture bien sécher avant de manipuler handling parts. les pièces. Gloss Black Noir brilliant * Any unused parts may be discarded. * Toute pièce inutilisée peut être jetée.
DECAL APPLICATION INSTRUCTIONS DIRECTIVES D'APPLICATION DES AUTOCOLLANTS Gloss Red Rouge brilliant 1. Découper l'autocollant désiré de la feuille. 1. Cut desired decal from sheet. 2. Tremper l'autocollant dans de l'eau pendant quelques Gloss White Blanc brilliant 2. Dip decal in water for a few seconds. secondes. 3. Place wet decal on paper towel. 3. Placer l'autocollant mouillé sur une serviette en papier. 4. Wait until decal is movable on paper backing. 4. Attendez que l'autocollant puisse être déplacé sur son support en papier. Graphite Metallic Graphite métallisé 5. Place decal in position on model, face up 5. Mettre l'autocollant en position sur le modèle face sur le and slide backing away. dessus et faire glisser le support pour l'enlever. 6. Press out air bubbles with a soft damp cloth. 6. Appuyer avec un chiffon doux humide pour éliminer Semigloss Black Noir satiné 7. Milkiness that may appear is for better decal les bulles d'air. adhesion and will dry clear. Wipe away any 7. La substance laiteuse qui peut apparaître est destinée à améliorer l'adhésion de l'autocollant et devient incolore excess adhesive. au séchage. Essuyer pour enlever tout excédent Steel Acier 8. Do not touch decal until fully dry. d'adhésif. 9. Allow the decals 48 hours to dry before 8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec. applying clear coat. 9. Laisser l'autocollant sécher pendant 48 heures avant Transparent Blue Bleu transparent d'appliquer une couche transparente. NOTE: Decals are compatible with REMARQUE: Les autocollants sont compatibles avec Transparent Red Rouge transparent setting solutions or solvents. les solutions de fixage ou les solvants.
If you have any questions or comments, call our hotline at: (800) 833-3570 or, please write to: Revell-Monogram Consumer Service Department, 725 Landwehr Road, Northbrook, Illinois 60062 Be sure to include the plan number (85261600200), part number, description, your return address and phone number. Visit our website: www.revell-monogram.com REVELL-MONOGRAM, LLC Northbrook, IL. Copyright © 2003. All rights reserved. 1 BIG DEUCE ENGINE ASSEMBLY
A ★92 ★ BREATHER CAP 93 SHIFT LEVER CHROME ★89 HOUSING VALLEY COVER CHROME CHROME (PAINT SHADED AREA GLOSS YELLOW)
87 LEFT HALF 86 ENGINE RIGHT HALF BLOCK ENGINE GLOSS BLACK BLOCK GLOSS BLACK
★91 TRANSMISSION HOUSING CHROME ★104 ★36 GENERATOR ★101 GENERATOR FRONT RIGHT STARTER PULLEY CHROME HOUSING CHROME CHROME
★103 GENERATOR ★102 CHROME LEFT STARTER ★208 HALF ★90 OIL FILTER CHROME OIL FILTER CHROME CHROME
★109 ROCKER COVER ★109 CHROME ROCKER COVER B (SEE ROCKER COVER ON CHROME ★ 100 OPPOSITE SIDE) (PAINT SHADED AREA REAR HALF PUL- GLOSS YELLOW) LEY CHROME 85 CYLINDER HEAD GLOSS BLACK ★99 FRONT HALF PULLEY CHROME
★98 FRONT DRIVE PULLEY CHROME
35 CYLINDER HEAD GLOSS BLACK ★97 REAR DRIVE PULLEY 88 CHROME WATER PUMP HOUSING GLOSS BLACK 1 BIG DEUCE ENGINE ASSEMBLY CONTINUED
C ★96 WATER OUTLETS CHROME ✱ ✱ ✱ ✱
✱ ★94 MANIFOLD RIGHT INTAKE TUBING MANIFOLD CHROME 84 SPARK PLUGS GLOSS WHITE ★95 (PAINT SHADED LEFT INTAKE AREA ALUMINIUM) MANIFOLD CHROME NOTE: SEE DETAILS ON THIS PAGE OF FOR INFORMATION ON INTAKE MANIFOLD LINES ✱ ✱ ✱ ✱
★107 D CARBURET OR LINKAGE CHROME ★106 LEFT HALF CARBURETOR CHROME (PAINT ALUMINIUM) ★105 ★108 RIGHT HALF CAR- AIR CLEANER BURETOR CHROME CHROME (PAINT ALUMINIUM)
★113 OIL CAP CHROME ★107 CARBURETOR LINKAGE CHROME
★113 OIL CAP CHROME
★117 RIGHT EXHAUST ★118 CHROME LEFT EXHAUST CHROME 1 BIG DEUCE ENGINE ASSEMBLY CONTINUED
E
NOTE: SEE DETAILS ON THIS PAGE FOR INFORMATION ON FUEL LINES
SHORT FUEL NOTE: HOSE ATTACHES LINE TO HIGHLIGHTED PIN ON THE CARBURETOR
MEDIUM ★112 FUEL NOTE: IF THE FUEL LINE FUEL LOG LONG CHROME LINES ARE TOO SMALL FUEL TO FIT THE DIAMETER LINE OF THE PINS USE A PENCIL TIP TO SPREAD FUEL LINES BEFORE ATTACHING TO PINS
F ★ 7 111 3 8 4 MAGNETO REAR CHROME 1 5 6 2
MAGNETO FRONT VIEWED FROM INSIDE ★110 FOR WIRING GUIDE MAGNETO FRONT ★110 CHROME MAGNETO 3&4 7&8 5 5/8" FRONT 6 5/8" 7 CHROME 3 1&2 1 7 9/16"
NOTE: IF THE IGNITION WIRES AND 2 SPARK PLUG CONNECTORS ARE TOO SMALL TO FIT THE DIAMETER 5&6 USE A PENCIL TIP TO SPREAD THE 6 5 15/16" 8-SPARKPLUG DIAMETER BEFORE ATTACHING CONNECTORS 4 5 8 8 8 2 6 4 6 4 2 5 3 7 1 ★110 MAGNETO FRONT CHROME
NOTE: SEE DETAILS ON LAST PAGE OF THIS SECTION OF THE INSTRUCTION MANUAL FOR INFOR- MATION ON SPARK PLUG LINES AND SPARK PLUG CONNECTORS
5 7 RUBBER 3 BAND 1 2 BIG DEUCE BODY ASSEMBLY
1 A LEFT UPPER HINGE HALF
2 LEFT UPPER HINGE HALF
3 LEFT LOWER HINGE HALF 4 LEFT LOWER HINGE HALF 9 BODY
B 5 RIGHT UPPER HINGE HALF 6 RIGHT UPPER HINGE HALF
7 RIGHT LOWER HINGE HALF
8 RIGHT LOWER HINGE HALF
NOTE: CUT DECAL FROM PAPER BUT DO NOT SLIDE FROM PAPER BACKING. GLUE TO THE BACK OF THE INSTRUMENT PANEL D
C 25 OR 26 19 DASHBOARD
★17 INSTRUMENT PANEL ★20 CHROME STEERING COLUMN SUPPORT CHROME
★10 E DOOR HANDLE F ★10 CHROME DOOR HANDLE CHROME
11 11 LOCK LOCK 2 BIG DEUCE BODY ASSEMBLY CONTINUED
NOTE: OPEN HOLES SHOWN TO ATTACH NOTE: CUT DECAL FROM PAPER BUT DO NOT SLIDE FROM PAPER G HANDLES AND ANTENNA IN A LATER STEP BACKING. GLUE TO THE BACK OF THE INSTRUMENT PANEL
H 18 FIREWALL 27 OR 28 30 TRUNK UPHOLSTERY
★16 FIREWALL PANEL CHROME
I
J K
26 21 LEFT REAR RIGHT FRONT INTERIOR INTERIOR 23 24 RIGHT REAR LEFT FRONT INTERIOR INTERIOR 25 22 LEFT DOOR RIGHT DOOR INTERIOR INTERIOR 3 BIG DEUCE FRAME ASSEMBLY
41 40 A REAR CROSS CENTER CROSS 39 MEMBER MEMBER FRONT CROSS MEMBER
42 GAS TANK HALF
162 GAS TANK HALF 38 45 RIGHT FRAME LEFT FRAME RAIL RAIL 3 BIG DEUCE FRAME ASSEMBLY CONTINUED
B C RIGHT 48 EYELET #2 CYLINDER HOUSING EYELET #1 EYELET #1 STEEL 47 ★50 CYLINDER SPINDLE TOP HOUSING CHROME STEEL ★49 FRONT EYELET #2 AXLE CHROME
NOTE: CAVITY AND 3 1/2” BRAKE LINE EYELET #1 PINS FACE REAR ON NOTE: BRAKE LINE FITS (★49) FRONT AXLE EYELET #2 INTO PIN ON FRAME
★51 RIGHT IDLER ARM CHROME
D RIGHT E LEFT ★54 EYELET #2 ★50 BRAKE DRUM SPINDLE TOP CHROME EYELET #1 EYELET #1 CHROME
★49 FRONT AXLE CHROME
EYELET #2
★55 EYELET #1 GREASE CAP ★53R CHROME EYELET #2 RIGHT FRONT BRAKE PLATE ★52 CHROME NOTE: CAVITY AND PINS FACE REAR ON LEFT IDLER ARM (★49) FRONT AXLE CHROME
F LEFT ★55 GREASE CAP CHROME
★54 BRAKE DRUM CHROME ★56L LEFT FRONT BRAKE PLATE CHROME
G LEFT H
★80 STEERING ARM CHROME 4 BIG DEUCE FRONT END ASSEMBLY
A 58 RETAINER ★57 TIE ROD CHROME
58 RETAINER
B ★60 RIGHT RADIUS ROD CHROME
★59 LEFT RADIUS ROD CHROME
★63 C FRONT SHOCK NOTE: BRAKE LINE CONNECTS FROM ABSORBER REPEAT FOR CHROME THE COMPLETED BRAKE DRUM TO THE FRAME AS SHOWN IN ILLUSTRATION OTHER SIDE
COMPLETED BRAKE DRUM FRAME ASSEMBLY ASSEMBLY ★62 LEFT SHOCK BRACKET CHROME
★61 RIGHT SHOCK BRACKET CHROME 2 1/4” BRAKE LINE 5 BIG DEUCE REAR END ASSEMBLY
★71 A ★64 B RIGHT REAR TOP HALF AXLE RADIUS ROD HOUSING CHROME CHROME
★65 BOTTOM HALF AXLE HOUSING CHROME
★67 RIGHT HALF Q.C. REAR END CHROME
★72 LEFT REAR ★68 RADIUS ROD QUICK CHANGE CHROME COVER ★69 ★66 CHROME REAR SPRING LEFT HALF Q.C. CHROME REAR END CHROME
C D
★70 REAR BACKING PLATE EYELET #3 EYELET #3 CHROME
★70 REAR BACKING EYELET #3 PLATE CHROME METAL AXLE
NOTE: USE (35) AXLE TOOL TO E PRESS METAL WHEEL RETAINER TO (★73) BRAKE DRUM REAR THROUGH METAL AXLE.
35 AXLE TOOL
METAL RETAINER
★73 BRAKE DRUM REAR CHROME ★73 BRAKE DRUM REAR CHROME 5 BIG DEUCE REAR END ASSEMBLY CONTINUED
★75 F AXLE STUB CHROME
★74 REAR SHOCK CHROME
★75 NOTE: BRAKE LINE CONNECTS FROM THE COMPLETED AXLE STUB BRAKE DRUM TO THE FRAME AS SHOWN IN ILLUSTRATION CHROME ★74 REAR SHOCK CHROME
COMPLETED BRAKE DRUM ASSEMBLY
1/2” BRAKE LINE FRAME ASSEMBLY REPEAT FOR OTHER SIDE
G 76 78 GEAR BOX GEAR HALF ★77 STEEL STEERING COLUMN CHROME
H EYELET #2
EYELET #1 ★81 79 DRAG LINK GEAR BOX CHROME HALF STEEL FIRST NOTE: STEER- EYELET #1 ING ARM AND DRAG LINK ARE ★82 EYELET #2 KEYED. ASSEMBLE PITMAN ARM TOGETHER BEFORE ★80 CHROME ★58 ATTACHING DRAG STEERING ARM CHROME RETAINER LINK TO FRAME CHROME 6 BIG DEUCE BODY PAN ASSEMBLY
A 83 FRONT FENDER
NOTE: STEERING COLUMN ASSEMBLY OMITTED FOR CLARITY
B
★119 BRACE CHROME
C 31 PEDAL ARMS FLAT BLACK
D
★33 ACCELERATOR PEDAL 34 CHROME FLOORBOARD
32 PEDAL FLAT BLACK 7 BIG DEUCE FRAME AND BODY ASSEMBLY
A B
130 FENDER
★121 TIRE MOUNT CHROME 129 FENDER
123 C LEFT REAR D FRAME COVER 124 SPARE TIRE 125 SPARE TIRE TOP
28 TAILLIGHT LENS TRANSPARENT RED
★29 122 TAILLIGHT 28 RIGHT REAR FRAME TAILLIGHT LENS FRAME CHROME TRANSPARENT RED COVER
E ★46 F GAS CAP CHROME ★127 ★ LEFT REAR BUMPER 131 BRACKET LICENSE PLATE CHROME CHROME
★128 ★ 126 315 BUMPER RIGHT REAR BEARING BUSTERS CHROME BUMPER CLUB PLATE BRACKET GRAPHITE METALLIC CHROME 8 BIG DEUCE GRILLE ASSEMBLY
★141 143 A CUSTOM GRILLE B FILLER SPOUT C CHROME SEMIGLOSS ★147 (PAINT GRILLE FACE BLACK RADIAT OR CAP SEMIGLOSS BLACK) CHROME ★142 FILLER CAP CHROME ★146 RADIAT OR ORNAMENT CHROME
145 RADIAT OR ★140 SEMIGLOSS CUSTOM GRILLE BLACK 139 144 BAR (PAINT CORE GRILLE SHELL OUTLET GLOSS BLACK CHROME FLAT BLACK)
★173 CENTER HOOD NOTE: ATTACH THE HOOD TEM- D ★175 E STRIP PORARILY WITH TAPE TO CENTER HOOD LATCH CHROME THE RADIATOR ASSEMBLY. TAPE CHROME HOOD TO RADIATOR ASSEMBLY ★174 AND GLUE RADIATOR ASSEMBLY HOOD HANDLE INTO PLACE BEFORE MOVING ON CHROME ★175 TO NEXT STEP HOOD LATCH CHROME
★175 HOOD LATCH CHROME NOTE: DO NOT 148 GLUE HOOD HOOD ASSEMBLY IN PLACE. HOOD ★174 ASSEMBLY IS ★175 HOOD HANDLE ATTACHED IN HOOD LATCH CHROME LATER STEPS CHROME
F G
COMPLETED WIRE BRACES RADIATOR ASSEMBLY 2” TUBING
2” TUBING
COMPLETED ENGINE ASSEMBLY 9 BIG DEUCE FRONT BUMPER AND RUNNING BOARD ASSEMBLY
135 ★133 LEFT RUNNING BOARD LEFT BUMPER FLAT BLACK BRACKET CHROME
★132 RIGHT BUM- 134 PER BRACKET RIGHT RUNNING CHROME BOARD FLAT BLACK ★128 BUMPER CHROME
10 BIG DEUCE EXHAUST ASSEMBLY
METAL ★137 A, B TAIL PIPE TIP MUFFLER BOTTOM HALF ★164 CHROME TAIL PIPE CHROME
METAL TAIL PIPE TIP
★136 A, B MUFFLER TOP HALF CHROME ★164 TAIL PIPE CHROME 11 BIG DEUCE HEADLIGHT ASSEMBLY
★ ★149 ★156 150 154 RIGHT HEADLIGHT LEFT HEADLIGHT BRACKET CHROME HEADLIGHT CHROME ★153 LENS CHROME LEFT HEADLIGHT CLEAR 2 3/4” TUBING RIM CHROME 2 3/4” TUBING
★151 HEADLIGHT BAR CHROME 154 ★152 HEADLIGHT ★155 ★200 RIGHT HEADLIGHT LENS EMBLEM HORN BACK CLEAR RIM CHROME CHROME CHROME
★199 HORN FRONT CHROME 12 BIG DEUCE INTERIOR TUB ASSEMBLY
★179 STEERING 176 WHEEL SPOKES SHIFTER KNOB CHROME TRANSPARENT RED
180 ★178 STEERING SHIFT LEVER WHEEL CHROME
37 SEAT
2 1/2” SEAT BELT MATERIAL
★236 SEAT BELT BUCKLE CHROME NOTE: SEAT BELTS ARE ★35 OPTIONAL SEAT BELT END ★35 ★236 CHROME SEAT BELT END SEAT BELT BUCKLE CHROME CHROME 13 BIG DEUCE WINDSHIELD AND LIGHTS ASSEMBLY 181 WINDSHIELD ★188 A CLEAR B WIPER MOT OR CHROME
★186 LEFT WIND- ★185 SHIELD RIGHT BRACKET WIND- CHROME ★ 182 SHIELD ★183 ★ WINDSHIELD BRACE RIGHT WINDSHIELD ★187 184 FRAME CHROME BRACKET WINDSHIELD LEFT WINDSHIELD CHROME BRACKET CHROME WIPER CHROME CHROME
C
201 COWL LENS CLEAR
★202 RIGHT COWL LAMP CHROME 201 COWL LENS CLEAR
★203 LEFT COWL LAMP CHROME
D ✱ ✱ ✱ 189 ✱ RIGHT WIND WING CLEAR ✱ 190 ✱ LEFT WIND WING CLEAR ✱ ✱
★191 ★192 SIDE VIEW MIRROR ✱ SIDE VIEW MIRROR FACE ARM CHROME CHROME 14 BIG DEUCE RAG TOP ASSEMBLY
A B C 194 TOP BOW STEEL
193 195 RIGHT TOP SMALL BOW 197 FRAME 196 STEEL STEEL LEFT TOP TOP FRAME STEEL
D E 198 REAR WINDOW CLEAR
15 FINAL DETAIL ASSEMBLY
★204 ANTENNA CHROME
★205 SUPPORT ★205 HANDLE SUPPORT CHROME HANDLE ★206 CHROME TRUNK HANDLE CHROME 16 BIG DEUCE FINAL ASSEMBLY
LARGE WIDE ★168 TREAD TIRE REAR ★169 OUTSIDE INSIDE WHEEL WHEEL HALF HALF CHROME CHROME
167 ★170 VALVE HUB CAP STEM CHROME OR ★ 171 REAR TIRES HUB CAP CHROME AND ★170 ★172 HUB CAP SPINNER CHROME CHROME OR ★171 HUB CAP CHROME AND ★172 SPINNER CHROME
★170 HUB CAP CHROME OR FRONT WHEELS ★468 ★171 FRONT OUTER ★169 HUB CAP WHEEL HALF INSIDE CHROME CHROME WHEEL AND HALF ★172 CHROME SPINNER CHROME ★170 HUB CAP CHROME OR ★171 HUB CAP ★ ★ ★171 CHROME 170 172 167 AND HUB CAP SPINNER HUB CAP VALVE ★172 CHROME CHROME CHROME SMALL WIDE STEM SPINNER TREAD TIRE CHROME 17 BIG DEUCE WIRING DIAGRAM 18 BIG DEUCE DECAL PLACEMENT 1 HIGHBOY ENGINE ASSEMBLY ★357 OIL CONNECTORS ★340 ★308 CHROME BLOCK OFF INTAKE MANIFOLD A PLATE CHROME ★341 CHROME ★93 311 CYLINDER SHIFT LEVER GENERATOR HEAD HOUSING PULLEY FRONT CHROME CHROME SEMIGLOSS BLACK 317 GENERATOR ★342 ★91 GENERATOR TRANSMISSION PULLEY BACK 306 CHROME HOUSING SEMIGLOSS BLACK RIGHT HALF CHROME ENGINE BLOCK ★341 GLOSS RED CYLINDER HEAD CHROME 312 318 314 ★320 WATER PUMP WATER PUMP STARTER COIL PULLEY FRONT PULLEY BACK GLOSS RED CHROME SEMIGLOSS BLACK SEMIGLOSS BLACK
313 CRANKSHAFT PULLEY FRONT 319 SEMIGLOSS 307 CRANKSHAFT 305 BLACK ENGINE PULLEY FRONT LEFT FRONT SEMIGLOSS BLACK HALF ENGINE BLOCK GLOSS RED GLOSS RED B ★108 AIR CLEANERS CHROME ★106 LEFT HALF CARBURETOR CHROME
★355 CARB LINKAGE FAN BELT CHROME
★105 RIGHT HALF CARBURETOR CHROME
309 310 DISTRIBUTOR DISTRIBUTOR FRONT BACK SEMIGLOSS BLACK SEMIGLOSS BLACK
C ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱
84 SPARK PLUGS GLOSS WHITE (PAINT SHADED AREA ALUMINIUM) 1 HIGHBOY ENGINE ASSEMBLY CONTINUED
NOTE: IF THE SPARK PLUG CONNECTORS ARE TOO SMALL D SPARK PLUG LINE TO FIT THE DIAMETER OF THE PINS ON THE ENGINE USE A PENCIL TIP TO SPREAD SPARK PLUG CONNECTORS BEFORE ATTACHING TO PINS OR SPARK PLUG LINES
SPARK PLUG CONNECTOR
NOTE: SEE DETAILS ON LAST PAGE OF THIS SECTION OF THE INSTRUCTION MANUAL FOR INFORMATION ON SPARK PLUG LINES AND SPARK PLUG CONNECT ORS
E NOTE: ADJUST SPARK PLUG LINES BEHIND THE FAN BELT AS SHOWN
★344 RIGHT EXHAUST HEADER CHROME
★343 LEFT EXHAUST HEADER CHROME 2 HIGHBOY BODY ASSEMBLY
1 A LEFT UPPER HINGE HALF GLOSS BLACK 2 LEFT UPPER HINGE HALF GLOSS BLACK
3 LEFT LOWER 4 HINGE HALF LEFT LOWER GLOSS BLACK HINGE HALF GLOSS BLACK 9 BODY
B 5 RIGHT UPPER HINGE HALF 6 GLOSS BLACK RIGHT UPPER HINGE HALF GLOSS BLACK 7 RIGHT LOWER HINGE HALF GLOSS BLACK
8 RIGHT LOWER HINGE HALF GLOSS BLACK
NOTE: CUT DECAL FROM PAPER BUT DO NOT SLIDE C FROM PAPER BACKING. GLUE TO THE BACK OF THE D INSTRUMENT PANEL
25 OR 26 19 DASHBOARD GLOSS BLACK
★17 INSTRUMENT PANEL CHROME ★20 STEERING COLUMN SUPPORT CHROME
★10 E DOOR HANDLE F ★10 CHROME DOOR HANDLE CHROME
11 11 LOCK LOCK 2 HIGHBOY BODY ASSEMBLY CONTINUED
G H
30 TRUNK UPHOLSTERY GLOSS BLACK
300 STOCK FIREWALL GLOSS RED
I J
21 RIGHT FRONT INTERIOR
26 23 LEFT REAR RIGHT REAR INTERIOR INTERIOR 24 LEFT FRONT 22 INTERIOR RIGHT DOOR INTERIOR 25 LEFT DOOR INTERIOR
3 HIGHBOY FRAME ASSEMBLY
41 40 A REAR CROSS CENTER CROSS 39 MEMBER MEMBER FRONT CROSS MEMBER GLOSS BLACK GLOSS BLACK GLOSS BLACK 43 LEFT 42 FRAME COVER GAS TANK HALF GLOSS BLACK GLOSS BLACK
44 RIGHT FRAME COVER 162 GLOSS BLACK GAS TANK HALF 38 GLOSS BLACK RIGHT FRAME 45 RAIL LEFT FRAME RAIL GLOSS BLACK GLOSS BLACK 3 HIGHBOY FRAME ASSEMBLY CONTINUED
B C RIGHT 48 EYELET #2 CYLINDER HOUSING EYELET #1 EYELET #1 47 STEEL ★50 CYLINDER SPINDLE T OP HOUSING CHROME STEEL ★49 FRONT EYELET #2 AXLE CHROME
3 1/2” BRAKE LINE NOTE: CAVITY AND EYELET #1 PINS FACE REAR ON NOTE: BRAKE LINE FITS (★49) FRONT AXLE EYELET #2 INT O PIN ON FRAME
★51 RIGHT IDLER ARM CHROME
D RIGHT E LEFT ★54 EYELET #2 ★50 BRAKE DRUM SPINDLE TOP CHROME EYELET #1 EYELET #1 CHROME
★49 FRONT AXLE CHROME
EYELET #2
★55 EYELET #1 GREASE CAP ★53R CHROME EYELET #2 RIGHT FRONT BRAKE PLATE ★52 CHROME NOTE: CAVITY AND PINS FACE REAR ON LEFT IDLER ARM (★49) FRONT AXLE CHROME
F LEFT ★55 GREASE CAP CHROME
★54 BRAKE DRUM CHROME ★56L LEFT FRONT BRAKE PLATE CHROME
G LEFT H
★80 STEERING ARM CHROME 4 HIGHBOY FRONT END ASSEMBLY
A 58 RETAINER ★57 TIE ROD CHROME
58 RETAINER
B ★60 RIGHT RADIUS ROD CHROME
★59 LEFT RADIUS ROD CHROME
★63 C FRONT SHOCK NOTE: BRAKE LINE CONNECTS FROM ABSORBER REPEAT FOR CHROME THE COMPLETED BRAKE DRUM TO THE FRAME AS SHOWN IN ILLUSTRATION OTHER SIDE
COMPLETED BRAKE DRUM FRAME ASSEMBLY ASSEMBLY ★62 LEFT SHOCK BRACKET CHROME
★61 RIGHT SHOCK BRACKET CHROME 2 1/4” BRAKE LINE 5 HIGHBOY REAR END ASSEMBLY
★71 A ★64 B RIGHT REAR TOP HALF AXLE RADIUS ROD HOUSING CHROME CHROME
★65 BOTTOM HALF AXLE HOUSING CHROME
★67 RIGHT HALF Q.C. REAR END CHROME
★72 LEFT REAR ★68 RADIUS ROD QUICK CHANGE CHROME COVER ★69 ★66 CHROME REAR SPRING LEFT HALF Q.C. CHROME REAR END CHROME
C D
★70 REAR BACKING EYELET #3 PLATE EYELET #3 CHROME
EYELET #3 ★70 REAR BACKING PLATE METAL AXLE CHROME
NOTE: USE (35) AXLE TOOL TO E PRESS METAL WHEEL RETAINER TO (★73) BRAKE DRUM REAR THROUGH METAL AXLE.
35 AXLE TOOL
METAL RETAINER
★73 BRAKE DRUM REAR CHROME
★73 BRAKE DRUM REAR CHROME 5 HIGHBOY REAR END ASSEMBLY CONTINUED
F ★75 AXLE STUB CHROME
★74 REAR SHOCK CHROME
★75 NOTE: BRAKE LINE CONNECTS FROM THE COMPLETED AXLE STUB BRAKE DRUM TO THE FRAME AS SHOWN IN ILLUSTRATION CHROME ★74 REAR SHOCK CHROME
COMPLETED BRAKE DRUM ASSEMBLY
1/2” BRAKE LINE FRAME ASSEMBL Y REPEA T FOR OTHER SIDE
G 76 GEAR BOX 78 HALF GEAR ★77 STEEL STEERING COLUMN CHROME
H EYELET #2
EYELET #1 ★81 DRAG LINK 79 CHROME GEAR BOX HALF STEEL NOTE: STEER- FIRST EYELET #1 ING ARM AND DRAG LINK ARE EYELET #2 KEYED. ASSEMBLE T OGETHER BEFORE ★80 ★82 ATTACHING DRAG STEERING ARM ★58 PITMAN ARM LINK T O FRAME CHROME RETAINER CHROME CHROME 6 HIGHBOY BODY PAN ASSEMBLY
A
SECOND
FIRST
★119 BRACE CHROME
B 31 PEDAL ARMS FLAT BLACK
34 FLOORBOARD FLAT BLACK C
★33 ACCELERATOR PEDAL CHROME
32 PEDAL FLAT BLACK 7 HIGHBOY FRAME AND BODY ASSEMBLY
NOTE: DRILL OUT HOLE ★349 FOR TAILLIGHT BLUE DOT TAILLIGHT BEZEL CHROME
370 TAILLIGHT LENS TRANSPARENT RED 371 TAILLIGHT BLUE DOT TRANSPARENT BLUE
★349 ★120 TAILLIGHT REAR BEZEL BRACE CHROME CHROME 371 TAILLIGHT BLUE DOT TRANSPARENT BLUE 370 TAILLIGHT LENS TRANSPARENT NOTE: DRILL OUT HOLE RED FOR TAILLIGHT BLUE DOT 7 HIGHBOY FRAME AND BODY ASSEMBLY CONTINUED
★206 TRUNK HANDLE CHROME
★46 GAS CAP CHROME
★350 LICENSE PLATE CHROME
316 ROAD DEVILS CLUB 315 PLATE BEARING BUSTERS CLUB GRAPHITE METALLIC PLATE GRAPHITE METALLIC
8 HIGHBOY RADIATOR ASSEMBLY
★138 A 143 B GRILLE FILLER SPOUT ★147 CHROME SEMIGLOSS BLACK RADIATOR CAP (PAINT GRILLE FACE CHROME GLOSS RED) ★142 FILLER CAP CHROME ★146 RADIATOR ORNAMENT CHROME
145 RADIATOR SEMIGLOSS BLACK (PAINT CORE FLAT BLACK)
139 GRILLE SHELL GLOSS BLACK 8 HIGHBOY RADIATOR ASSEMBLY CONTINUED
C
★346 NOTE: ATTACH FUEL LINES FROM FRONT OIL FUEL BLOCK PINS TO CARB PINS AS COOLER HALF SHOWN BELOW. NOTE THE NUMERICAL CHROME ★357 SEQUENCE. OIL CONNECTOR CHROME
★345 REAR OIL ★356 COOLER HALF FUEL BLOCK CHROME FIRST CHROME
FOURTH
THIRD
NOTE: ATTACH OIL LINES FROM PINS ON THE OIL COOLER TO THE INTAKE MANI- FOLD FITTING AND FROM THE OIL COOLER TO THE ENGINE BLACK OIL FITTING
SECOND
WIRE BRACES D 9 HIGHBOY HOOD ASSEMBLY
NOTE: FOR THE HIGHBOY VERSION CUT THE ★347 SIDES OF THE HOOD JUST BELOW THE LEFT RIDGE LINES RADIATOR HOSE CHROME (PAINT SHADED AREA GLOSS RED) CUT
CUT ★348 RIGHT RADIATOR HOSE CHROME (PAINT SHADED AREA GLOSS RED) 148 HOOD
★173 CENTER HOOD STRIP CHROME
10 HIGHBOY EXHAUST ASSEMBLY
METAL ★164 TAIL PIPE ★137 A, B TAIL PIPE TIPS MUFFLER BOTTOM HALF CHROME CHROME ★353 LEFT FRONT EXHAUST PIPE CHROME
★164 TAIL PIPE CHROME
★136 A, B MUFFLER TOP ★ HALF 354 CHROME RIGHT FRONT EXHAUST PIPE CHROME 11 HIGHBOY FRONT LIGHTS ASSEMBLY
★149 ★ LEFT RIGHT ★150 HEADLIGHT 153 HEADLIGHT ★152 HEADLIGHT CHROME RIM HEADLIGHT CHROME CHROME RIM CHROME
★157 154 HEADLIGHT BRACKET 154 LENS CHROME HEADLIGHT CLEAR LENS ★158 CLEAR BRACKET CHROME
12 HIGHBOY STEERING/SHIFT ASSEMBLY
180 ★178 STEERING WHEEL SHIFT LEVER CHROME
★179 177 STEERING WHEEL SHIFT KNOB SPOKES TRANSPARENT RED CHROME 13 HIGHBOY SEAT ASSEMBLY
37 SEAT
2 1/2” SEAT BELT MATERIAL
★236 SEAT BELT BUCKLE CHROME
★35 ★35 SEAT BELT SEAT BELT ★ NOTE: SEAT END 236 END BELTS ARE CHROME SEAT BELT CHROME BUCKLE OPTIONAL CHROME 14 HIGHBOY WINDSHIELD ASSEMBLY
181 ★185 ★ WINDSHIELD RIGHT 188 WIPER MOTOR CLEAR WINDSHIELD BRACE CHROME ★ CHROME 186 LEFT ✱ WINDSHIELD ✱ BRACE ✱ CHROME ✱ ✱ ✱
★183 RIGHT WINDSHIELD ★ 182 BRACKET WINDSHIELD ✱ CHROME FRAME ★ ★184 CHROME 187 WINDSHIELD LEFT WINDSHIELD WIPER BRACKET CHROME CHROME
★191 SIDE VIEW MIRROR FACE CHROME
★192 SIDE VIEW MIRROR ARM CHROME 15 HIGHBOY FINAL ASSEMBLY
301 303 FRONT OUTER REAR OUTSIDE WHEEL HALF ★352 WHEEL HALF WHEEL GLOSS BLACK GLOSS BLACK ★351 RIM HUB CAP CHROME CHROME
★351 HUB CAP CHROME
302 INSIDE 304 SMALL NARROW WHEEL INSIDE TREAD TIRE WHEEL ★352 HALF LARGE NARROW GLOSS TREAD TIRE HALF WHEEL GLOSS BLACK RIM BLACK CHROME 16 HIGHBOY WIRING 17 HIGHBOY DECAL PLACEMENT 1 RAT ROD ENGINE ASSEMBLY
A ★92 ★93 BREATHER CAP SHIFT LEVER HOUSING CHROME CHROME ★89 (PAINT SEMIGLOSS BLACK) VALLEY COVER CHROME (PAINT ALUMINUM) 87 LEFT HALF ENGINE 86 BLOCK RIGHT HALF SEMIGLOSS ENGINE BLACK BLOCK SEMIGLOSS BLACK
★91 TRANSMISSION HOUSING ★104 CHROME GENERATOR (PAINT STEEL) ★36 FRONT GENERATOR CHROME ★101 PULLEY (PAINT GLOSS RED) RIGHT STARTER CHROME HOUSING CHROME (PAINT GLOSS RED)
★103 GENERATOR CHROME (PAINT GLOSS RED) ★ ★102 208 ★90 LEFT STARTER OIL FILTER OIL FILTER CHROME HALF CHROME (PAINT GLOSS RED) CHROME (PAINT GLOSS BLACK) (PAINT GLOSS RED)
★109 ROCKER COVER ★ B CHROME 109 (PAINT ALUMINIUM) ROCKER COVER CHROME (PAINT ALUMINIUM) ★100 85 REAR HALF PUL- CYLINDER HEAD LEY SEMIGLOSS BLACK CHROME
★99 FRONT HALF PULLEY CHROME
★98 FRONT DRIVE PULLEY CHROME
35 CYLINDER HEAD ★97 88 SEMIGLOSS BLACK REAR DRIVE WATER PUMP PULLEY HOUSING CHROME SEMIGLOSS BLACK 1 RAT ROD ENGINE ASSEMBLY CONTINUED
C 96 WATER OUTLET STEEL ✱ ✱ ✱ ✱
✱ ★94 MANIFOLD RIGHT INTAKE TUBING MANIFOLD CHROME
★95 84 LEFT INTAKE SPARK PLUGS MANIFOLD GLOSS WHITE CHROME (PAINT SHADED AREA ALUMINIUM) NOTE: SEE DETAILS ON THIS PAGE OF FOR INFORMATION ON INTAKE MANIFOLD LINES ✱ ✱ ✱ ✱
D ★106 ★108 LEFT HALF AIR CLEANERS CARBURETOR CHROME CHROME (PAINT STEEL) ★105 RIGHT HALF CARBURETOR CHROME (PAINT STEEL)
★113 OIL CAP CHROME ★114 ★113 SPANNERS OIL CAP CHROME CHROME (PAINT GLOSS WHITE)
★114 SPANNERS CHROME (PAINT GLOSS WHITE)
STEEL STEEL
★115 RIGHT EXHAUST CHROME (PAINT GLOSS WHITE) ★116 LEFT EXHAUST CHROME (PAINT GLOSS WHITE) 1 RAT ROD ENGINE ASSEMBLY CONTINUED
E
NOTE: SEE DETAILS ON THIS PAGE FOR INFORMATION ON FUEL LINES NOTE: HOSE ATTACHES TO HIGHLIGHTED PIN SHORT FUEL ON THE CARBURETOR LINE
MEDIUM FUEL NOTE: IF THE FUEL LINE LINES ARE TOO SMALL LONG ★112 FUELFUEL LOG TO FIT THE DIAMETER LINE CHROME OF THE PINS USE A PENCIL TIP TO SPREAD FUEL LINES BEFORE ATTACHING TO PINS
F 7 ★111 3 8 4 MAGNETO REAR CHROME 1 5 6 (PAINT SHADED AREA SEMIGLOSS BLACK) 2
MAGNETO FRONT VIEWED FROM INSIDE ★110 FOR WIRING GUIDE MAGNETO FRONT ★110 CHROME MAGNETO FRONT 3&4 7&8 5 5/8" CHROME 6 5/8" 7 (PAINT SHADED AREA SEMIGLOSS BLACK) 3 1&2 1 7 9/16"
NOTE: IF THE IGNITION WIRES AND 2 SPARK PLUG CONNECTORS ARE TOO SMALL TO FIT THE DIAMETER 5&6 USE A PENCIL TIP TO SPREAD THE 5 15/16" 8-SPARKPLUG DIAMETER BEFORE ATTACHING 6 CONNECTORS 4 8 5 8 6 2 4 6 8 4 3 5 ★110 2 7 1 MAGNETO FRONT CHROME
NOTE: SEE DETAILS ON BACK PAGES OF THIS INSTRUCTION SHEET FOR INFORMATION ON SPARK PLUG LINES AND SPARK PLUG CONNECTORS
RUBBER BAND 5 7 3 1 2 RAT ROD BODY ASSEMBLY
1 A LEFT UPPER HINGE HALF DARK GRAY 2 PRIMER LEFT UPPER HINGE HALF DARK GRAY PRIMER
3 LEFT LOWER 4 HINGE HALF LEFT LOWER DARK GRAY HINGE HALF PRIMER DARK GRAY 9 PRIMER BODY
B 5 RIGHT UPPER HINGE HALF 6 DARK GRAY RIGHT UPPER PRIMER HINGE HALF DARK GRAY PRIMER 7 RIGHT LOWER HINGE HALF DARK GRAY PRIMER
8 RIGHT LOWER HINGE HALF DARK GRAY PRIMER
C NOTE: CUT DECAL FROM PAPER BUT DO NOT SLIDE FROM PAPER D BACKING. GLUE TO THE BACK OF THE INSTRUMENT PANEL
25 OR 26 19 DASHBOARD DARK GRAY PRIMER
★17 ★20 INSTRUMENT STEERING COLUMN PANEL SUPPORT CHROME CHROME (PAINT DARK GRAY PRIMER) 2 RAT ROD BODY ASSEMBLY CONTINUED
E F ★10 DOOR HANDLE ★10 CHROME DOOR HANDLE CHROME
11 11 LOCK LOCK
G H
30 TRUNK UPHOLSTERY DARK GRAY PRIMER
300 FIREWALL GLOSS WHITE
24 I J LEFT FRONT INTERIOR 21 SEMIGLOSS RIGHT FRONT BLACK INTERIOR SEMIGLOSS BLACK
23 26 RIGHT REAR LEFT REAR 25 22 INTERIOR INTERIOR LEFT DOOR RIGHT DOOR SEMIGLOSS SEMIGLOSS INTERIOR INTERIOR BLACK BLACK SEMIGLOSS SEMIGLOSS BLACK BLACK 3 RAT ROD FRAME ASSEMBLY
41 A REAR CROSS MEMBER 40 39 DARK GRAY CENTER CROSS FRONT CROSS PRIMER MEMBER MEMBER DARK GRAY PRIMER DARK GRAY PRIMER
42 GAS TANK HALF DARK GRAY PRIMER
162 GAS TANK HALF 38 DARK GRAY RIGHT FRAME PRIMER RAIL 45 DARK GRAY LEFT FRAME RAIL PRIMER DARK GRAY PRIMER
B C RIGHT
NOTE: CAVITY AND PINS FACE REAR ON (★49) FRONT AXLE
48 CYLINDER HOUSING NOTE: SEE DETAILS ON LAST PAGE STEEL OF THIS INSTRUCTION SHEET FOR ★50 INFORMATION ON BRAKE LINE SPINDLE TOP EYELET #2 CHROME (PAINT GLOSS RED) EYELET #1 EYELET #1
47 CYLINDER HOUSING ★ STEEL 43 49 LEFT FRONT AXLE FRAME COVER CHROME DARK GRAY PRIMER (PAINT GLOSS RED) EYELET #2
44 EYELET #1 RIGHT FRAME COVER EYELET #2 DARK GRAY PRIMER 3 1/2” BRAKE LINE NOTE: BRAKE LINE FITS ★ INTO PIN ON FRAME 51 RIGHT IDLER ARM CHROME (PAINT GLOSS RED) 3 RAT ROD FRAME ASSEMBLY CONTINUED
D RIGHT E LEFT ★ ★54 EYELET #2 50 BRAKE DRUM SPINDLE TOP CHROME CHROME EYELET #1 (PAINT GLOSS RED) (PAINT GLOSS RED)
EYELET #1
★49 FRONT AXLE CHROME (PAINT GLOSS RED)
EYELET #2 ★55 EYELET #1 GREASE CAP EYELET #2 CHROME ★53R (PAINT GLOSS RED) RIGHT FRONT BRAKE PLATE CHROME NOTE: CAVITY AND ★52 (PAINT GLOSS RED) PINS FACE REAR ON LEFT IDLER ARM (★49) FRONT AXLE CHROME (PAINT GLOSS RED)
F LEFT ★55 GREASE CAP CHROME (PAINT GLOSS RED)
★54 BRAKE DRUM CHROME (PAINT GLOSS RED)
★56L LEFT FRONT BRAKE PLATE CHROME (PAINT GLOSS RED)
G LEFT H
★80 STEERING ARM CHROME (PAINT GLOSS RED) 4 RAT ROD FRONT END ASSEMBLY
A 58 ★57 RETAINER TIE ROD CHROME (PAINT GLOSS RED)
58 RETAINER
B ★60 RIGHT RADIUS ROD CHROME (PAINT GLOSS RED)
★59 LEFT RADIUS ROD CHROME (PAINT GLOSS RED)
★63 FRONT SHOCK C ABSORBER CHROME NOTE: BRAKE LINE CONNECTS FROM (PAINT GLOSS RED) THE COMPLETED BRAKE DRUM TO THE REPEAT FOR FRAME AS SHOWN IN ILLUSTRATION OTHER SIDE
COMPLETED BRAKE DRUM FRAME ASSEMBLY ASSEMBLY ★62 LEFT SHOCK BRACKET CHROME (PAINT GLOSS RED) ★61 RIGHT SHOCK BRACKET CHROME (PAINT GLOSS RED) 2 1/4” BRAKE LINE 5 RAT ROD REAR END ASSEMBLY
A ★64 B TOP HALF AXLE HOUSING ★71 CHROME RIGHT REAR (PAINT GLOSS RED) RADIUS ROD CHROME ★ 65 (PAINT GLOSS RED) BOTTOM HALF AXLE HOUSING CHROME (PAINT GLOSS RED)
★67 RIGHT HALF Q.C. REAR END CHROME (PAINT GLOSS RED)
★72 LEFT REAR ★68 RADIUS ROD QUICK CHANGE CHROME ★ COVER 69 (PAINT GLOSS RED) REAR SPRING ★66 CHROME CHROME LEFT HALF Q.C. (PAINT GLOSS RED) (PAINT GLOSS RED) REAR END CHROME (PAINT GLOSS RED)
C
★70 REAR BACKING PLATE CHROME (PAINT GLOSS RED) ★70 REAR BACKING PLATE CHROME (PAINT GLOSS RED)
D
EYELET #3
EYELET #3
EYELET #3
METAL AXLE 5 RAT ROD REAR END ASSEMBLY CONTINUED
E NOTE: USE (35) AXLE TOOL TO PRESS METAL WHEEL RETAINER TO (★73) BRAKE DRUM REAR THROUGH METAL AXLE.
35 AXLE TOOL
METAL RETAINER
★73 BRAKE DRUM REAR CHROME (PAINT GLOSS RED)
★73 BRAKE DRUM REAR CHROME (PAINT GLOSS RED)
6 RAT ROD GEAR ASSEMBLY
76 78 GEAR BOX ★77 GEAR HALF STEERING COLUMN STEEL CHROME (PAINT STEEL)
EYELET #2 ★81 EYELET #1 DRAG LINK 79 CHROME GEAR BOX (PAINT GLOSS RED) HALF STEEL FIRST EYELET #1 NOTE: STEER- EYELET #2 ING ARM AND DRAG LINK ARE KEYED. ASSEMBLE ★80 ★82 T OGETHER BEFORE STEERING ARM PITMAN ARM A TT ACHING DRAG CHROME 58 CHROME RETAINER (PAINT GLOSS RED) LINK T O FRAME CHROME (PAINT GLOSS RED) 6 RAT ROD GEAR ASSEMBLY CONTINUED
★75 AXLE STUB CHROME (PAINT GLOSS RED)
74 REAR SHOCK GLOSS RED
NOTE: BRAKE LINE CONNECTS FROM THE COMPLETED ★75 BRAKE DRUM TO THE FRAME AS SHOWN IN ILLUSTRATION AXLE STUB CHROME (PAINT GLOSS 74 RED) REAR SHOCK GLOSS RED FRAME ASSEMBLY
COMPLETED BRAKE DRUM ASSEMBLY
1/2” BRAKE LINE
REPEAT FOR OTHER SIDE 7 RAT ROD ENGINE ASSEMBLY
★119 BRACE CHROME (PAINT GLOSS RED) 8 RAT ROD BODY PAN ASSEMBLY
31 PEDAL ARMS FLAT BLACK
34 FLOORBOARD ★33 FLAT BLACK ACCELERATOR PEDAL CHROME
32 PEDALS FLAT BLACK 9 RAT ROD BODY ASSEMBLY
10 RAT ROD REAR END ASSEMBLY
28 ★206 TAILLIGHT LENS TRUNK HANDLE TRANSPARENT RED CHROME
★29 TAILLIGHT FRAME CHROME ★46 GAS CAP CHROME
★350 LICENSE PLATE ★120 28 CHROME REAR TAILLIGHT LENS BRACE TRANSPARENT RED CHROME ★29 (PAINT GLOSS RED) TAILLIGHT FRAME CHROME 11 RAT ROD RADIATOR ASSEMBLY
★147 143 RADIATOR CAP FILLER SPOUT CHROME FLAT BLACK
★138 ★142 GRILLE FILLER CAP ★146 CHROME CHROME RADIATOR ORNAMENT CHROME
144 OUTLETS SEMIGLOSS BLACK
145 RADIATOR SEMIGLOSS BLACK WITH 139 FLAT BLACK GRILLE SHELL CORE DARK GRAY PRIMER
COMPLETED WIRE BRACES RADIATOR ASSEMBLY
2” TUBING
2” TUBING
COMPLETED RADIATOR COMPLETED ASSEMBLY SHOWN IN PLACE ENGINE ASSEMBLY 12 RAT ROD LIGHT ASSEMBLY
LEFT ★153 RIGHT ★152 HEADLIGHT HEADLIGHT RIM RIM CHROME CHROME
★150 HEADLIGHT ★149 CHROME HEADLIGHT 154 (PAINT DARK CHROME 154 HEADLIGHT GRAY PRIMER) (PAINT DARK HEADLIGHT ★158 ★157 LENS GRAY PRIMER) LENS BRACKET BRACKET CLEAR CLEAR CHROME CHROME (PAINT DARK GRAY PRIMER) (PAINT DARK GRAY PRIMER)
13 RAT ROD EXHAUST ASSEMBLY
164 METAL TAIL PIPE TAIL PIPE ★136 A, B STEEL TIPS MUFFLER TOP HALF CHROME (PAINT ALUMINIUM)
★166 RIGHT FRONT EXHAUST PIPE CHROME (PAINT STEEL) 164 TAIL PIPE STEEL
★137 A, B MUFFLER BOTTOM HALF ★165 CHROME LEFT FRONT (PAINT ALUMINIUM) EXHAUST PIPE CHROME (PAINT STEEL) 14 RAT ROD STEERING AND SHIFTER ASSEMBLY
176 SHIFTER KNOB TRANSPARENT RED
178 SHIFT LEVER SEMIGLOSS BLACK
★179 STEERING WHEEL SPOKES CHROME
180 STEERING WHEEL SEMIGLOSS BLACK 15 RAT ROD SEAT ASSEMBLY
NOTE: PLACE THE BLANKET OVER THE SEAT TO TEST FIT FOR PLACEMENT. DOUBLE STICK TAPE (WHICH IS NOT INCLUDED) MAY BE USED TO SECURE BLANKET TO SEAT.
37 SEAT 16 RAT ROD WINDSHIELD ASSEMBLY ✱ ✱ ✱ ✱ ✱
✱ ✱ 181 ★182 WINDSHIELD WINDSHIELD CLEAR FRAME CHROME
★188 ★185 WIPER MOTOR RIGHT WINDSHIELD CHROME BRACE CHROME (PAINT DARK GRAY PRIMER)
★186 LEFT WINDSHIELD BRACE ★183 CHROME RIGHT WINDSHIELD (PAINT DARK GRAY PRIMER) BRACKET CHROME (PAINT DARK GRAY PRIMER) ★187 WINDSHIELD ★184 WIPER LEFT WINDSHIELD BRACKET CHROME CHROME (PAINT DARK GRAY PRIMER)
201 COWL LENS CLEAR 201 COWL LENS CLEAR
★203 LEFT COWL LAMP ★202 CHROME RIGHT COWL LAMP CHROME 16 RAT ROD WINDSHIELD ASSEMBLY CONTINUED
✱ 190 ✱ LEFT WIND WING 189 CLEAR RIGHT WIND WING ✱ CLEAR ✱
✱ ✱
✱ ✱
★192 ✱ SIDE VIEW MIRROR ★191 ARM SIDE VIEW MIRROR CHROME FACE CHROME
17 RAT ROD TIRE ASSEMBLY
FRONT 301 FRONT OUTER WHEEL HALF GLOSS RED ALUMINIUM MOON DISK
302 INSIDE WHEEL HALF GLOSS RED
ALUMINIUM MOON DISK
SMALL NARROW TREAD TIRE
304 INSIDE WHEEL HALF GLOSS RED 303 REAR OUTSIDE WHEEL HALF GLOSS RED REAR LARGE NARROW TREAD TIRE 18 RAT ROD FINAL ASSEMBLY 19 RAT ROD WIRING 20 RAT ROD DECAL PLACEMENT
85261600200