DOCSLIB.ORG

Junma Road Roller

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Junma Road Roller JUNMA ROAD ROLLER Specializing in production of the small and medium road roller http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 Contents Company Profile 01 YZS07 Vibratory Roller 02 JMS08H Full Hydraulic Vibratory Roller 03 YZ1 Vibratory Roller 04 YZC2 Vibratory roller 05 YZC3 Vibratory Roller 06 YZC3H Full Hydraulic Vibratory Roller 07 YZC3.5H Full Hydraulic Vibratory Roller 08 YZC4 Vibratory Roller 09 YZC4.5H Full Hydraulic Vibratory Roller/Oscillatory Roller 10 YZC6/YZDC6 Vibratory Roller/Oscillatory Roller 11 YZ6C/YZD6C Vibratory Roller/Oscillatory Roller 12 YZDC6H Full Hydraulic Vibratory Oscillatory Roller 13 2YJ8/10 Two Wheel Road Roller 14 YZC10J /12J Vibratory Roller 15 YZC12HC/YZDC12HC Vibratory Roller/Oscillation Roller 16 JM813H/JMD813H Full Hydraulic Vibratory Roller/Oscillatory roller 17 JM814, JM816, JM818, JM820 Vibratory Roller 18 JQS-150A Asphalt Mixture Recycling Plant 19 Factory Picture 20 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 Company Profile Jiangsu Junma Road Roller Co., Ltd., a regular member unit of the Ministry of Communications China Highway Construction Association, has specialized in producing complete sets of mini and medium road machinery since the 1980s. Our products have passed the quality authentication of ISO9001: 2000 control system and product quality is supervised by the State Bureau of Quality and Technical Supervision. We have won the honors of "Certificate for Product Exemption from Quality Surveillance Inspection", "National Standard Product with Steady Quality", "Trust Product of Jiangsu Province", "High-New Technological Enterprises of Jiangsu Province", "Well-known Brand of Jiangsu Province", "Well-known Products of Taizhou City", "AAA Credit Enterprise" and others one after another, as well as some national patents. Our products were named as "Major Promotion Brand" by China Highway Construction Association and "One of the Top 50 of China Annual Construction and Machinery Products" in the year of 2007. Our major products, model YSZ07, YZ1 and YZ2 vibratory rollers are suitable for working in the narrow and limited sites, and model YZC3, YZC3H, YZC3.5H, YZ4, YZC4.5H, YZC6, YZ6C, YZC10J, YZC12J, YZ12 and YZ14b vibratory rollers are suitable for compacting the base of highroads, streets, airports, industry zones or parking ground. Among the above rollers, model YZD4, YZDC6 and YZD6C can be used for compacting roadbed as well as road surface especially the areas subject to vibration. Model 2YJ8/10, 3Y10/12, and 3Y15/18 rollers are fit for deep-compacting work. Our business scope: making and selling compacting machinery, road surface machinery, construction machinery as well as importing and exporting above mentioned products. Based on the principle of "Technique Advanced, Quality Best and Customers Superior", we offer wholehearted service to clients at home and abroad. Our products have been exported to Bangladesh, Indonesia, Serbia and other countries and regions, and have got a good reputation among consumers. 01 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 YSZ07 Vibratory Roller Applications Road, sidewalk, country road, parking ground, trenches and courtyard etc. Main Features 1) Mechanical moving transmission and shake vibration drives with reliable performance. 2) Vertical vibration with great activating force and high efficiency. 3) Compact design and small size assure rolling compaction into narrow ground. 4) A cart is provided for transportation. 5) Compacting force is up to 2t. Technical Data Operating weight 0.5 t Vibration frequency 50 Hz Theoretical amplitude of Diameter of vibrating drum Φ540 mm 0.62 mm vibration Rolling width 650 mm Moving speed range 1.5 km/h Static Linear Pressure 105 N/cm Grade ability 20% Diesel engine model R175 Centrifugal force 15.36 KN Rated rotation speed 2600 r/min Rated power 4.85 kw 2000×820× overall dimensions L W H mm Rated power 4.85 KW 1100 02 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 JMS08H Full Hydraulic Vibratory Roller Applications Road, sidewalk, country road, parking ground, trenches and courtyard etc. Main Features 1) Hydraulic drive, hydraulic steering, mechanical vibration and reliable performance. 2) Vertical vibration with great activating force and high efficiency. 3) Compact design and small size assure rolling compaction into narrow ground. 4) A cart is provided for transportation. 5) Compacting force is up to 2t. Technical Data Theoretical amplitude of Operating weight 0.8 t 0.5 mm vibrarion Diameter of vibrating drum φ400 mm Moving speed gearⅠ 0-3.5 km/h Rolling width 625 mm Gradeabihity 30% Static Linear Pressure(front/rear) 55/60 N/cm Gradeabihity 30% Diesel engine: model KM18 Centrifugal force 20 KN Rated rotation speed 6F/FA r/min Overall dimensions 2400 Vibration frequency 60 Hz Rated power 3000 mmkw L W H × 5.7680 ×105 0 03 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 YZ1 Vibratory Roller Applications Road, sidewalk, country road, parking ground, trenches and courtyard etc. Main Features 1) Mechanical moving transmission and shake vibration drives with reliable performance. 2) Vertical vibration with great activating force and high efficiency; 3) Compact design and small size assure rolling compaction into narrow ground. 4) A cart is provided for transportation. 5) Compacting force up to 3t Technical Data Theoretical amplitude of Operating weight 1 t 0.7 mm vibration Diameter of vibrating drum φ650 mm Moving speed gearⅠ 1.7 Rolling width 820 mm Moving speed gearⅡ 3.5 km/h Static Linear Pressure 83 N/cm Gradeabihity 20% Diesel engine: model R185 Activating force 19.6 KN Rated rotation speed 2200 r/min Rated power 6.47 kw overall dimensions 1960 ×10 Vibration frequency 50 Hz mm L W H 60×2000 04 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 YZC2 Vibratory roller Applications Highway, municipal work, country road, stadium and other projects etc. Main Features 1) This roller has articulated frame, with reliable function, flexible steering, good stability and smooth compact. 2) Hydraulic vibration and high efficiency 3) Mechanical travel and vibration with reliable performance 4) Scraper and sprinkling devices on all drums Choose trailer for four wheels according to user's requirements. Technical Data Theoretical amplitude Operating weight 2 t 0.5 mm of vibration Diameter of vibrating drum φ650 mm Moving speed gearⅠ 2 Rolling width 850 mm Moving speed gearⅡ 5.6 km/h Static Linear Pressure 105 N/cm Gradeability 20% Diesel engine: model CZ380Q r/min Centrifugal force 20 KN Rated rotation speed 2200 kw Rated power 14.7 overall dimensions 2660 ×1060 Vibration frequency 50 Hz mm L W H ×2350 05 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 YZC3 Vibratory Roller Applications Highway, municipal work, country road, stadium and other projects etc. Main Features 1) Hydraulic vibration and high efficiency; 2) This roller has reliable function drive in comfort、appearance、flexible、steering、good stability and smooth compact; 3) A cart as figure is provided for transportation. 4) Compacting force up to 6t 5) Scraper and sprinkling devices on all drums Technical data Theoretical amplitude Operating weight 3 t 0.58 mm of vibration Diameter of vibrating drum φ800 mm Moving speed gearⅠ 2 Rolling width 1000 mm Moving speed gearⅡ 5.6 km/h Static Linear Pressure 162 N/cm Gradeability 20% Diesel engine model N385Q r/min Activating force 29.6 KN Rated rotation speed 2400 kw Rated power 21 overall dimensions 2990×1280 Vibration frequency 50 Hz mm L*W*H ×2360 06 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 YZC3H Full Hydraulic Vibratory Roller Applications Highway, municipal work, country road, stadium and other projects etc. Main Features 1) Full hydraulic drive, vibration and steering and two ranges stepless change gear. 2) Close performance is extremely fine and work close building. 3) Small turning radius and flexible drive and especially in narrow job site 4) Large capacity, water tank with anti-corrosive glass fiber reinforced plastic, electric pressurized sprinkler. 5) Low noise and wide-field and operate simply and drive comfortable. 6) Choose driver's cab and trailer for four wheels according to user's requirements. Technical Data Theoretical amplitude of Operating weight 3 t 0.62 mm vibration Diameter of vibrating drum φ760 mm Moving speed gearⅠ 0-2.5 Rolling width 1200 mm Moving speed gearⅡ 0-7.2 km/h Static Linear Pressure 135 N/cm Gradeability 30% Diesel engine: model N385Q r/min Activating force 32 KN Rated rotation speed 2400 kw Rated power 21 overall dimensions 2940 ×1300 Vibration frequency 50 Hz mm L W H ×2400 07 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 YZC3.5H Full Hydraulic Vibratory Roller Applications Highway, municipal work, country road, stadium and other projects etc. Main Features 1) Full hydraulic double-drum drive, double-drum vibration, hydraulic articulated. 2) Advanced performance and reliable quality for the main hydraulic elements contain SAUER in-line plunger pump and low speed, great torque radial piston motor. 3) Electric control start up and make it easy to operate, Electric control sprinkling also have good effects. 4) The fore cover takes streamline design, beautiful and generous. It can open in a big angle. Easy to maintenance 5) The frame and drum are articulated and in concave design. It can work cling to the road shoulder or building and close performance is extremely fine. Technical Data： Theoretical amplitude of Operating weight 3.5 t 0.45 mm vibration Diameter of vibrating drum φ760 mm Moving speed Range 0-10 km/h Rolling width 1250 mm Gradeability 30% Diesel engine: model ZN390Q r/min Static Linear Pressure 140 N/cm Rated rotation speed 2600 kw Rated power 25 overall dimensions 2900 ×1370 Activating force 30*2 KN mm L W H ×2600 Vibration frequency 50 Hz 08 http://roadroller.en.alibaba.com/ E-mail:[email protected] Skype: lydialiu186 YZC4 Vibratory Roller Applications Highway, municipal work, country road, stadium and other projects etc.
Load more

Recommended publications
  • Payandan Shareholders
    PAYANDAN PAYANDAN 1. Company Background Creative Path to Growth Payandan Shareholders PAYANDAN Payandan’s shares belong to Mostazafan Foundation of Islamic Revolution. • Mostazafan Foundation owns 49% • Sina Energy Development Company owns 51% Mostazafan Foundation of Islamic Revolution Sina Energy Development Company PAYANDAN Mostazafan Foundation of Islamic Revolution PAYANDAN SEDCO Sina Financial Paya Saman Pars (Oil & Gas) & Investment Co (Road & Building) Sina Food Industries Iran Housing Group Saba Paya Sanat Sina (Power & Electricity) (Tire, Tiles, Glasswork, Textile, Etc) Ferdos Pars Sina ICT Group (Agriculture) Parsian Tourism Kaveh Pars & Transport Group (Mining) Alavi Foundation Alavi Civil (Charitable) Engineering Group Sina Energy Development Holding Company PAYANDAN SEDCO as one of subsidiaries of The Mostazafan Foundation of Islamic Revolution is considered one of pioneer holding companies in area of oil & gas which aims on huge projects in whole chains of oil and gas. Payandan (Oil & Gas General Contractor) North Drilling (Offshore Drilling) Pedex (Onshore Drilling) Behran (Oil Refinery Co) Dr Bagheri SEDCO Managing Director Coke Waste Water Refining Co Payandan in Numbers PAYANDAN +40 1974 Years ESTABLISHED +1400 +4000 EMPLOYEES CONTRACTOR +200,000,000 $ ANNUAL TURNOVER 75 COMPLETED PROJECTS Company Background PAYANDAN • 48” Zanjan-Mianeh Pipeline • 56” Saveh-Loushan • South Pars – SP No. 14 Pipeline (190KM) • South Pars – SP No. 13 • 56" Dezfoul- Kouhdasht Pipeline (160KM) 1974 1996 2003 2005 2007 2009 2011 2013 2015 2017 • Nargesi Gas • F & G Lavan • 56” Asaluyeh Gathering & • South Pars – SP Pipeline Injection No. 17 & 18 • 30” Iran- Payandan is • South Pars – SP No. 22,23,24 Armenia established (oil and • 48” Iraq Pipeline Naftkhane- Pipeline gas contractor) Baghdad (63KM) (113KM) • 56” Naeen-Tehran Gas Pipeline (133KM) • Parsian Gas Refinery • 56” Loushan-Rasht Gas Pipeline (81KM) • Pars Petrochemical Port • Arak Shazand Refinery • Kangan Gas Compressor Station • South Pars – SP No.
    [Show full text]
  • 1949 December Engineers News
    ... OPERATING .E·NGINEERS LO·CAL 3 STATIONARY ENGINEERS ··LOCAl· 39 SAN FRANCISCO, CALIF. DECEMB.ER 15, '~<!14~ :A Strong Program fo_r Jobs~ Green Green\ to DEVELOP STATE'S . , s NEEDS, RESOURCES, GOVERN,OR IS TOLD AFL Building T"?ades Department and the Associated G-en­ Rolise California into action on projects vitally needed in eral Contractors of America have filed a request with NLRB .its new, post-war status, and at the same time produce jobs asking blanket exemption from Taft-Hartley labor law elec­ badly needed to keep its inflated population gainfully em­ tion requirements on the grounds that elections in this indus.., ployed, Governor Warren was advised by a strong confer~ try ar~ impractical, costly, 90 per c:ent AFL supporting thus ence of business, labor and civic leaders in the state's capital · far, and wholly unnecessary.. on December 7, 8. ~R,J~w 8 ~~~m(!d Thus th~re was climaxed. t wo Public works, coristruction,e civic - AFL President. rg ·. Washington. 'un~~ ~ "~ ~ years of costly red tape caused .bY :r_:1eeds, private building needs, and 15,000 Arrive in William Green (left) pins flower V a. ·' on Leonard G1•een (no relation), r!lr the ill-begott en Taft-Harney law other projects that are or may b~ ·assistant general secretary N a­ f'tt-rnst.::.t·n. ~A~~:i'tftl~_ r .),;})0 a I!Jl!U ~ ~~~ni!J~~s and a growing protest against it ~ lagging for one r eason dr another l.ional Union of Operative Hea-ting, A S ·cant Each nth Domestic, Ventilating Engineers TO.
    [Show full text]
  • An Energy Model for Sustainable Decision-Making in Road Construction Projects
    AN ENERGY MODEL FOR SUSTAINABLE DECISION-MAKING IN ROAD CONSTRUCTION PROJECTS Jan Krantz, Weizhuo Lu, Tim Johansson & Thomas Olofsson Luleå University of Technology, Sweden. ABSTRACT: Road construction operations often require considerable amounts of energy in the form of fossil fuels, thus generating substantial greenhouse gas (GHG) emissions. While fuel efficiency of the heavy construction equipment is extensively studied, limited attention is given to how the construction process can be planned in order to reduce energy use and GHG-emissions. In this study a conceptual model is proposed for the assessment of energy use and GHG-emission on-site at road construction projects. The model is applied to a road construction project to evaluate production alternatives in the early planning stages of the project. As a result the most favorable alternative in terms of energy use and GHG-emissions could be selected during the construction phase. This demonstrates the model’s ability to quantify environmental effects and energy use of different production alternatives. KEYWORDS: Earthworks; Energy estimation; Greenhouse gas emissions. 1. INTRODUCTION AND BACKGROUND Road construction generally requires extensive earthworks operations such as excavations, hauling, and depositing of materials as well as crushing of rock. These operations require large and energy intensive equipment and thus generate considerable amounts of greenhouse gas (GHG) emissions (Apif M, Phil 2013). (Stripple 2001) estimated that the amount of fuel needed to construct a road is about 5% of the total fuel consumption of all traffic, of 5 000 vehicles per day, using the road during its expected lifetime of 40 years. Energy efficiency, as a measure for mitigating GHG-emissions, has become one of the most important centers of attention for the Swedish Transport Administration (STA).
    [Show full text]
  • Cover Technical Guides Convert.Indd
    If there are sharp curves in the road where vehicles can maintain a high speed, invert In sharp curved the the camber of the road (see also fi gure 43). This will reduce the risks of slipping camber of on the vehicles. Inverting the camber is gradually built up over a 20m section before entering outer side needs to into the curve. be inverted Figure 45: Example of inverting the camber in a sharp curve 7.4 Graveling In the past graveling of roads was considered an effective and cost-effective option Gravel surfaces for surfacing low-volume rural roads. Recent research however shows that gravel have many roads have serious limitations in many situations. Very often gravel surfaces are not limitations appropriate, affordable or sustainable for rural roads. There are for example serious problems related to the maintenance and sustainability of gravel surfaces (or ordinary earth roads). Although the initial construction costs of gravel roads are low, the maintenance costs are very high. The suitability of graveling roads depends on a range of factors. These include for example the road gradient, rainfall, material quality, haul distance and maintenance regime. Gravel should NOT be used if any of the following conditions, or a combination of them applies: Gravel quality is poor; Situations Compaction & thickness cannot be assured ; where gravel is not suitable as Haul distances are longer than 10km; surface option Rainfall is very high – Gravel loss is related to rainfall; There are dry season dust problems; Technical Guidelines for Supervisors Technical Traffi c levels are high, i.e. more than 200 vehicle equivalents per day; 49 Road gradients are more than 6% (with < 1,000mm rain per year) or more than 4% (with 1,000 – 2,000mm rain per year); If rainfall is more than 2,000mm/year; Adequate maintenance cannot be provided; Sub-grade is weak or soaked; Gravel deposits are limited or environmentally sensitive.
    [Show full text]
  • Trade Catalogs in Degolyer Library
    TRADE CATALOGS IN DEGOLYER LIBRARY 1. AGRICULTURE. A. Buch's Sons Co. ILLUSTRATED CATALOGUE AND PRICE LIST. LAND ROLLERS, LAWN ROLLERS, CORN SHELLERS, WHEELBARROWS, CORN MARKERS, STRAW AND FEED CUTTERS, STEEL AND CAST TROUGHS FOR STOCK, CELLAR GRATES, AND A FULL LINE OF SMALL IMPLEMENTS. (Elizabethtown PA, 1903). 64pp. 2. AGRICULTURE. A. W. Coates & Co. CENTENNIAL DESCRIPTIVE CIRCULAR OF THE COATES LOCK-LEVER HAY AND GRAIN RAKE. (Alliance OH, 1876). 3. AGRICULTURE. Abeneque Machine Works. GAS & GASOLENE ENGINES. TRACTION ENGINES, WOOD SAWING OUTFITS, PUMPING PLANTS, PNEUMATIC WATER SYSTEMS, HAY PRESSES, HAY HOISTS, GRINDERS, ENSILAGE CUTTERS, SAW MILLS, THRESHING MACHINES, GENERAL FARM MACHINERY. (Westminster Station VT, 1908)., 24pp. 4. AGRICULTURE. Albion Mfg. Co. Gale Sulky Harrow Mfg. Co. GALE SULKY HARROW CULTIVATOR & SEEDER. (Detroit & Albion MI, [1882]). 5. AGRICULTURE. American Harrow Company. AMERICAN. THE MAKING AND SELLING OF AMERICAN MANURE SPREADERS. (Detroit MI, 1907). 6. AGRICULTURE. American Seeding Machine Co. Empire Drill Co. AMERICAN SEEDING MACHINE CO. ALMANAC AND HOUSEHOLD ENCYCLOPEDIA. (Springfield OH, 1905). 7. AGRICULTURE. Avery Company Manufacturers. AVERY TRACTORS, PLOWS, SEPARATORS, AND STEAM ENGINES. (Peoria IL, 1916). 8. AGRICULTURE. Avery Power Machinery Co. AVERY STEEL THRESHERS. BETTER AND SIMPLER. (Peoria IL, circa 1930). 9. AGRICULTURE. B - L - K Milker Company. B - L - K MILKER. (Little Falls NY, circa 1930, 8pp.. 1O. AGRICULTURE. Bateman Bros. Inc. CATALOGUE No. 28. FARM IMPLEMENTS AND SUPPLIES. (Philadelphia PA, 1928); 171pp. 11. AGRICULTURE. Bateman Manufacturing Company. IRON AGE FARM, GARDEN AND ORCHARD IMPLEMENTS. HOME, FARM AND MARKET GARDENING WITH MODERN TOOLS. (Grenloch NJ, 1918). 12. AGRICULTURE. [Bees]. A.I.Root Company. ROOT QUALITY BEE SUPPLIES.
    [Show full text]
  • Steel-Tired Rollers
    Steel-Tired Rollers CHARLES F. PARKER, Chief Engineer, W. H. Hinman, Inc., Westbrook, Maine • THE STEEL-TIRED ROLLER was one of the first types to be used in highway con• struction and it still plays an important part in the construction of base courses and flexible-type pavements. The correct use and improvements in the design of these rollers to better accomplish a specified purpose is important. The use of pneumatic-tired, vibratory and other types of rollers is recognized. However, this paper is confined to steel-tired rollers of the static type. There have been many important developments in vibratory rollers, many of which are steel-tired. However, vibratory rollers, even when steel-tired, are not considered in this paper. Application of the use of steel-tired rollers in this paper is limited mainly to the construction of crushed stone macadam-type base and surface courses and bituminous concrete base and wearing course pavements. Webster's dictionary defines a tire as "a hoop or band of metal, rubber, air-filled rubber tube, or the like, placed around a wheel of a vehicle to form the tread." Tread is defined as "the part of a wheel, tire or runner which bears on the road, rail, etc., or any of various things or parts on which a person or thing treads, stands or moves." Although this type of roller is commonly called "steel-wheeled," a more accurate term would be to describe it as a "steel-tired" roller. HISTORY OF THE STEEL-TIRED ROLLER Although it would be appropriate if this paper could be started by stating ]ust who invented the first steam roller, the best that can be said is that this has been a con• troversial item for many years.
    [Show full text]
  • Statistical Research of Vibration Road Rollers and Perforated Operating Devices
    World Applied Sciences Journal 25 (7): 1018-1022, 2013 ISSN 1818-4952 © IDOSI Publications, 2013 DOI: 10.5829/idosi.wasj.2013.25.07.13362 Statistical Research of Vibration Road Rollers and Perforated Operating Devices Sergey Maksimovich Ugay, Uri Uakovlevich Kovalenko and Natalya Sergeevna Pogotovkina Far Eastern Federal University, Vladivostok, Russia Submitted: Sep 10, 2013; Accepted: Oct 18, 2013; Published: Oct 25, 2013 Abstract: The vibration road rollers belong to the machines used in rolling the road base both at the initial and at the final stage of the sealing process. World manufacturers constantly improve their products, renewing up to 30% of the manufactured equipment. New items are aimed at improving functional and technological parameters, allowing to raise the productivity and quality with account to scientific developments. Today the road sector needs the road roller able to implement the multiplicative effect, provide the “intellectual” compaction with quality control in real-time. By now over 600 models that differ both in their major parameter (weight) and in design have been created. Such an abundance represents a significant statistical material that is used to determine the dependencies between the parameters of road rollers in the form of regression equations with the correlation estimate. The new comparative evaluation is offered – the sealing capacity indicator (SCI), allowing to evaluate the ability of compaction of road concrete mixes by road rollers. The effectiveness of using the road roller with the new type of operating device – perforated rollers allowing to automatically change the amount of contact pressure and able to operate at all stages of the compaction process was found out.
    [Show full text]
  • Lonking (3339 HK)
    Equity Research | Construction Machinery Oct 17, 2017 Lonking (3339 HK) Buy (initiation) Beneficiary of the upcycle in China’s construction machinery industry; Target price: HK$4.30 initiate at Buy Initiate at Buy with TP of HK$4.30 We like Lonking for three main reasons: 1) it stands to benefit from the current upcycle in China’s construction machinery sector; 2) product price Dominic Chan, CFA, FRM increases should spur further business momentum; 3) market share gains demonstrate its SFC CE No. APP609 competiveness. We forecast net profit will rise 81% and 24% respectively in 2017/18, and [email protected] that net profit will see a CAGR of 37% during 2016-19. We initiate our coverage with a Buy +852 3719 1218 rating and target price of HK$4.30, based on 15x 2018E P/E and 2.0x 2018E P/B, its historical averages since 2006, and a 10% discount to the average 2018E P/E of its international peers. GF Securities (Hong Kong) Brokerage Limited 29-30/F, Li Po Chun Chambers Upcycle in China’s construction machinery industry Construction machinery sales 189 Des Voeux Road Central volume in China has been on the rise since 2H16. In 9M17, loader sales volume came in at Hong Kong 67,786 units, up 48% YoY, while excavator sales volume was 101,934units, up a substantial 100% YoY. This strong sales volume has been driven by steady FAI in China’s infrastructure, property and mining sectors, and replacements of machines sold during 2010-2012, after 6-8 years’ use.
    [Show full text]
  • Botts' Dots, Delineators, Cat's Eyes, Road Studs, Or Road Turtles
    First Edition, 2012 ISBN 978-81-323-0978-9 © All rights reserved. Published by: Academic Studio 4735/22 Prakashdeep Bldg, Ansari Road, Darya Ganj, Delhi - 110002 Email: [email protected] Table of Contents Chapter 1 - Introduction to Road Construction Chapter 2 - Asphalt Concrete Chapter 3 - Road Roller Chapter 4 - Steamroller Chapter 5 - Stone Mastic Asphalt Chapter 6 - Road Transport Chapter 7 - Frontage Road Chapter 8 - Passing Lane & Parking Space Chapter 9 - Overpass & Hydrogen Highway Chapter 10 - Highway Chapter 11 - High–Occupancy Vehicle Lane Chapter 12 - Raised Pavement Marker Chapter 13 - Reversible Lane Chapter 1 Introduction to Road Construction Road construction requires the creation of a continuous right-of-way, overcoming geographic obstacles and having grades low enough to permit vehicle or foot travel and may be required to meet standards set by law or official guidelines. The process is often begun with the removal of earth and rock by digging or blasting, construction of embankments, bridges and tunnels, and removal of vegetation (this may involve deforestation) and followed by the laying of pavement material. A variety of road building equipment is employed in road building. After design, approval, planning, legal and environmental considerations have been addressed alignment of the road is set out by a surveyor. The Radii and gradient are designed and staked out to best suit the natural ground levels and minimize the amount of cut and fill. Roadways are designed and built for primary use by vehicular and pedestrian traffic. Storm drainage and environmental considerations are a major concern. Erosion and sediment controls are constructed to prevent detrimental effects.
    [Show full text]
  • Heavy Metal Archive Workshop Marshalls, Sons and Company 5 December 2007
    Heavy Metal archive workshop Marshalls, Sons and Company 5 December 2007 Museum of English Rural Life Redlands Road Reading RG1 5EX Tel: 0118 378 8660 [email protected] www.merl.org.uk About the Heavy Metal project ‘Heavy Metal’ is an archive project, funded by the Heritage Lottery Fund, the Road Locomotive Society and the University of Reading. The project started in January 2007 to encourage more people to use MERL’s steam engine and farm machinery manufacturers’ archives and to make them more accessible. Over many months, Museum staff and volunteers have sorted and catalogued a large range of archives. These include 10,000 engineering drawings produced by steam engine manufacturers, Charles Burrell and 2,500 from Wallis and Steevens. The volunteers, who include members of the Road Locomotive Society, also learnt conservation techniques enabling them to repackage glass negatives and preserve around 1,000 fragile drawings. A project archivist was employed to sort and produce an electronic catalogue of three major archive collections: Wallis and Steevens and agricultural machinery manufacturers’ International Harvester and Massey-Ferguson. These collections include technical literature, business and employee records, engineering drawings, photographs and advertising materials. When the electronic catalogues are complete, the list of MERL archives will be available for everyone online at the Access to Archives’ website – www.a2a.org.uk The project has also enabled MERL to digitise a number of fragile archives to preserve them for the future and make them easier to use. These include a number of Wallis and Steevens production registers, which are requested frequently, and 600 glass negatives on loan from the Road Locomotive Society.
    [Show full text]
  • Arizona Highways Issued by the Arizona State Highway Department Phoenix, Arizona
    35:!O f ARIZONA HIGHWAYS ISSUED BY THE ARIZONA STATE HIGHWAY DEPARTMENT PHOENIX, ARIZONA With the Idea of Furthering the Development of Good Roads Throughout the State EDITORS ARE PRIVILEGED ' TO USE ANY OF THE MATTER HEREIN CONTAINED ~9 Volume 2. Phoenix. ArIzona. December 30. 1922. Number 3. ',~ . ~m MAR 141923 1923 Funds for Arizona Highways Equipment Superintendent Lists Supplies Status of State Road Construction Department Installs Two Branch Yards 1922 Breaks All Road Building Records f , ARIZONA HIGHWAYS 1 ARIZONA HIGHWAY DEPARTMENT 1% SYSTEM f .. " ~ I rnc... f .. 1923 FUNDS FOR ARIZONA HIGHWAYS A. !HI ~ fJl December 30, 1922. ----------r------ -----, -. Mr. , Frank· R. Goodman, Phoenix, Arizona. 1.41923 ~~ i . Dear Sir: I . T T ~ A.V ) I Attached please note a list of funds available for 19 s ~ :f'd construction. ! Items 1 to 9 inclusive, should provide so e lOgO> casl~ the next 60 or 7tl days. Items 10 to 16 ' ~ inclusive, ~h ould provide an additional $600,000 of ready funds. /n~ I During the last 30 days we have cleared up all the old accounts that could possibly be handled 'so that $260,- ,./---- 000 will probably more than cover all of the outstanding accounts at the present time, including payments for -lao ( bor and supplies, and estimates due contractor, etc., including roa d work done during December. I Our monthly expenditures are approximately $250, 000 . The State Imprest Fund is $50,000 but $150,000 is i really needed for this purpose. i We average between $300,000 and $400,000 in Federal vouchers in transit.
    [Show full text]
  • Agricultural Technology Brochures Collection O-005
    http://oac.cdlib.org/findaid/ark:/13030/c8ww7p9h No online items Inventory of the Agricultural Technology Brochures Collection O-005 Liz Phillips University of California, Davis General Library, Dept. of Special Collections 2016 1st Floor, Shields Library, University of California 100 North West Quad Davis, CA 95616-5292 [email protected] URL: http://www.lib.ucdavis.edu/dept/specol/ Inventory of the Agricultural O-005 1 Technology Brochures Collection O-005 Language of Material: English Contributing Institution: University of California, Davis General Library, Dept. of Special Collections Title: Agricultural Technology Brochures Collection Creator: Higgins, Floyd Halleck (1886-1975) Identifier/Call Number: O-005 Physical Description: 12 linear feet Date (inclusive): 1836-2003 Abstract: The collection contains promotional and descriptive published materials for various types of farm machinery and equipment. Researchers should contact Special Collections to request collections, as many are stored offsite. History The Agricultural Technology Brochures Collection began as a series in the F. Hal Higgins Collection. In 1927 F. Hal Higgins began collecting materials relating to the history of combines and tractors. Over time the collection expanded to include materials describing farm implements, farm commodities, and equipment for logging, earthmoving and construction. Scope and Content The collection contains promotional and descriptive published materials for various types of farm machinery and equipment. Related Materials O-011, Agricultural Technology Manuals Collection O-012, Agricultural Technology Catalogs Collection D-004, Anthony W. Bakken Collection D-056, F. Hal Higgins Collection D-116, F. Hal Higgins Papers Access Collection is open for research. Processing Information The collection was processed by Liz Phillips with the help of student assistants Kelly Liang, Dana Aros, Julie Jeon, Fiona Sun, and archives intern Megan Lohnash.
    [Show full text]