<<

L

Audio unit operation

ON/OFFAudio unit operation CONTROL To operate the audio system, the ignition must Seek be on (engine START/STOP button pressed). When the engine is stopped, for the audio PTY 3CH system to remain active, the START/STOP Audio FM 97.5 Seek

button must be pressed again without pressing AM/ FM Settings the brake pedal. CD Autostore The audio system can be turned on in two WCBS WABC WFAN ways: WXRP WNYC WPLJ

WQXR WHTZ WHUD

12 : 26 pm

E93918

JAG1572 The touch-screen will display Seek on the upper display until a station has been found, 1. Press the audio On/off and Volume control and will then display the station name, where knob on the touch-screen console, or available. 2. Touch the Audio icon on the main Home menu. Audio Settings The touch-screen will then display the current Sound Personality audio settings. Options Public Clear all PTY PTY College AUDIO CONTROL Search Weather Depending on the specification of the audio Alert system fitted to your vehicle, there are a number of audio control settings available from 12 : 26 pm the Audio or Settings displays. E93919 Audio - Seek tuning Long touch: In AM or FM mode, for as long as the button is being touched, the frequencies The seek down or seek up buttons on the will be scanned either up or down. touch-screen console and the touch-screen carry out the same function. The touch-screen will display Manual on the upper display for a short time. While this is Short touch: In AM or FM mode, touching and displayed, a short touch of the buttons will also releasing the seek down (left-hand) or seek up allow the frequencies to be scanned. (right-hand) buttons will activate the radio tuning through the frequency range, up or down, to the next available station.

250 R

Audio unit operation

Settings - Sound Radio text sent by station

PTY 3CH AM 770 WABC Text sent by station

PTY 3CH PTY 3CH Audio AM 770 WABC Audio FM 102.6 WPLJ

AM/ FM Text sent by station Settings AM/ FM Text sent by station Settings

CD Autostore CD Autostore

WCBS WABC WFAN WCBS WABC WFAN

WXRP WNYC WPLJ WXRP WNYC WPLJ

WQXR WHTZ WHUD WQXR WHTZ WHUD

12 : 26 pm 12 : 26 pm

E93920 E93922

Selecting Settings from the audio main display Radio text messages sent out by the selected screen, defaults to Sound and makes available station. various audio system setting facilities. Audio Settings Bass and treble Sound FM text Off On When Settings has been selected, the display defaults to Sound settings. Options PTY

Audio Settings

Sound Bass

Options Treble 14 : 26 pm

PTY Balance L R E93923 Fade R F To set the display to show radio text messages select Settings - Options -FM text.

12 : 26 pm A pop-up display screen is available, showing E93921 the whole of the message, by selecting the continuation arrow. Bass and treble levels are increased or decreased by touching the (+) or (-) buttons. Balance and fade Balance - left to right. Fade - rear to front. These levels are optimised for a selected seating position by touching the L or R, R or F buttons.

251 L

Audio unit operation

Jaguar Premium Surround Sound Home This audio system has the facility of Digital Audio FM text Signal Processing (DSP) which optimises the

Climate sound for specific seating positions. The latest news headlines from WPLG. Phone It also allows the user to select stereo,

Navigation 3-channel stereo or Dolby Pro Logic II Surround Sound. It is recommended that Vehicle FM text off Dolby Pro Logic II Surround Sound is used in 12 : 26 pm Valet CD mode and strong FM transmissions. E93924 Note: When various setting are altered in DSP, The pop-up will time out after approximately 12 the sound will briefly fade while the settings are seconds, or can be cancelled by touching changing and will return to normal when the anywhere within the pop-up. Selecting the FM change has been completed. text off button will cancel the display for Radio Note: Convertible only: The sound will text entirely. automatically change for when the convertible top is up or down. Automatic Volume Control (AVC) This maintains radio volume at a level sufficient SETTINGS to overcome road noise as vehicle speed increases or decreases. Audio Settings

To activate the AVC: Sound DSP Stereo 3 Ch. PLII

• From the main Home touch-screen menu, Bal/Fade Base select Vehicle. Options Treble • Select Syst. settings. PTY Sub • Select Vol. presets.

Vehicle 12 : 26 pm

Display set E93927

Preferences Navigation When selected, the Settings display defaults to

Button audio Sound and displays the available premium audio system setting facilities. Vol. presets

AVC Low Medium High

12 : 26 pm

E93925

• Select either Low, Medium or High for the AVC.

252 R

Audio unit operation

Audio Settings Audio Settings

Sound DSP Stereo 3 Ch. PLII Sound

Bal/Fade Base1 Bal/Fade Center 2 3 Options Treble Options Surround

PTY Sub PTY

12 : 26 pm 12 : 26 pm

E93928 E93930

1. Stereo Select either Center or Surround. 2. 3 Ch Note: The number of available settings will 3. Dolby Pro Logic II Surround Sound depend on whether Stereo, 3Ch or Dolby Pro Logic II Surround Sound is selected. These levels are altered by selecting the appropriate buttons. Audio Settings

Bass, Treble and Sub levels are increased or Sound DSP Stereo 3 Ch. PLII decreased by touching the (+) or (-) buttons for the system facilities. Bal/Fade Base Options Treble

Audio Settings PTY Sub

Sound DSP Stereo 3 Ch. PLII

Bal/Fade Base 12 : 26 pm

Options Treble E93931 PTY Sub DSP (Digital Signal Processing): To optimise the sound for specific seating positions select

12 : 26 pm DSP and then select the required seating

E93929 position.

To select further settings, use the scroll down Audio Settings control to access the next screen display. DSP

Front

Driver

All

12 : 26 pm

E93932

Either Front, Driver or All may be selected.

253 L

Audio unit operation

AUTOSTORE CONTROL Audio Settings

Sound Autostore

Bal/Fade Center PTY 3CH Audio FM 97.5 Options Surround AM/ FM Settings

PTY CD Autostore

WCBS WABC WFAN 12 : 26 pm WXRP WNYC WPLJ E93933 WQXR WHTZ WHUD

Bal/Fade: The sound can be optimised by 12 : 26 pm

using the scrolling buttons to alter the Balance E93937 (left to right) and Fade (front to rear). Autostore: The automatic memory function Options and PTY functions are the same as for programmes up to nine strong stations on a Settings, as described previously. selected waveband to presets 1 to 9. WAVEBAND BUTTON To activate this function, touch and hold Autostore button for at least two seconds. AM/FM band switching The radio will be briefly muted while it searches the selected waveband (AM, FM) for up to nine FM1 FM2 AM strong stations. When programming is completed the radio will

PTY 3CH default to preset number 1 and audio volume Audio AM 770 WABC will be restored. AM/ FM Text sent by station Settings If stations cannot be located for all the preset CD Autostore positions, those that are found will be allocated

WCBS WABC WFAN positions commencing with number 1, leaving the remainder not programmed. The display WXRP WNYC WPLJ will show ---- and be greyed out if WQXR WHTZ WHUD unprogrammed presets are selected. 12 : 26 pm When programmes have been set: A short E93934 touch of Autostore will allow the user to switch Selecting AM/FM will cycle the radio through between the automatically stored stations and FM1, FM2 and AM (a combination of Medium the manually stored stations. and Long wavebands). Band selection will be shown in the display panel. When a CD is being played, touching the band switch will select radio operation.

254 R

Audio unit operation

STATION PRESET BUTTONS Preset memorized radio stations (1 - 9)

WARNING In the interests of road safety, do not attempt to preset a station while driving.

PTY 3CH Audio FM 93.5 KSAN

AM/ FM Settings

CD Autostore

WCBS WABC WFAN

WXRP KSAN WPLJ

WQXR WHTZ WHUD

12 : 26 pm

KSAN

E93938

On each waveband (AM, FM1, FM2), nine stations can be memorized using the touch-screen keypad buttons. After tuning to a station, touch and hold the selected button until the station has been stored. A station can be recalled from the preset memory by touching and immediately releasing the button. A long press of the steering wheel preset selector button will cycle through the preset stations. See AUDIO CONTROL (page 62).

255