User's Guide for Nokia 5300

User’s Guide for Nokia 5300 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-146 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia, Visual Radio, Nokia Connecting People, Xpress-on, XpressPrint, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See .

Copyright © 2007 Nokia. All rights reserved. i Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

Issue 2.1

INTERACTIVE DEMONSTRATIONS The Nokia Care web support provides you with more information on our online services.

INTERACTIVE DEMONSTRATIONS SOFTWARE Learn how to set up your phone for the first time, and find out more about its features. Interactive Demonstrations give step-by-step instructions on using your phone.

USER’S GUIDE The online User’s Guide contains detailed information on your phone. Remember to check regularly for updates.

SOFTWARE Make the most of your phone with software for your phone and PC. Nokia PC Suite connects your phone and PC so you can manage your calendar, contacts, music and images, while other applications complement its use.

USER’S GUIDE SETTINGS Certain phone functions, such as multimedia messaging, mobile browsing and email*, may require settings before you can use them. Have them sent to your phone free of charge. SETTINGS *Not available on all phones.

Copyright © 2007 Nokia. All rights reserved. iii HOW DO I USE MY PHONE? The Set Up section, at www.nokia-asia.com/setup, helps you prepare your phone for use. Familiarise yourself with phone functions and features by referring to the Guides and Demos section at www.nokia-asia.com/guides.

HOW DO I SYNCHRONISE MY PHONE AND PC? Connecting your phone to a compatible PC with the requisite Nokia PC Suite version from www.nokia-asia.com/pcsuite lets you synchronise your calendar and contacts.

WHERE CAN I GET SOFTWARE FOR MY PHONE? Get more out of your phone with downloads from the Software section at www.nokia-asia.com/software.

WHERE CAN I FIND ANSWERS TO COMMON QUESTIONS? Look up the FAQ section at www.nokia-asia.com/faq for answers to your questions on your phone and other Nokia products and services.

HOW DO I KEEP UP WITH NOKIA NEWS? Subscribe online to Nokia Connections at www.nokia-asia.com/signup, and be the first to know about the latest products, promotions and upcoming events.

Should you still require further assistance, please refer to www.nokia-asia.com/contactus. For additional information on repair services, please visit www.nokia-asia.com/repair.

Please visit www.nokia-asia.com/support for details.

For your safety...... ix Indicators ...... 6 About your device...... x Flight mode ...... 7 Network services...... x Keypad lock (keyguard)...... 8 Shared memory ...... xi Functions without a SIM card ...... 8 Enhancements ...... xi 3. Call functions ...... 9 General information ...... xii Make a call...... 9 Access codes ...... xii Speed dialing...... 9 Security code...... xii Enhanced voice dialing ...... 9 PIN codes...... xii Answer or reject a call...... 10 PUK codes ...... xii Call waiting ...... 10 Barring password ...... xii Options during a call...... 10 Configuration settings service.... xii Download content...... xiii 4. Write text ...... 11 Nokia support and contact Traditional text input ...... 11 information...... xiii Predictive text input...... 11 1. Get started ...... 1 5. Navigate the menus...... 12 Install SIM card and battery...... 1 6. Messaging...... 13 Insert a microSD card...... 2 Text message ...... 13 Remove the microSD card ...... 2 Write and send a message ...... 13 Charge the battery ...... 3 Read and reply to a message...... 14 Open the slide phone...... 3 Multimedia message ...... 14 Switch the phone on and off ...... 3 Write and send a multimedia Set the time and date...... 3 message ...... 14 Plug and play service...... 4 Write and send a multimedia plus Antenna...... 4 message ...... 14 Headset...... 4 Message sending...... 15 Audio adaptor ...... 4 Read and reply to a message...... 15 Phone strap ...... 4 Postcards...... 16 Flash messages...... 16 2. Your phone...... 5 Write a message...... 16 Keys and parts ...... 5 Receive a message...... 17 Standby mode...... 6 Nokia Xpress audio messaging ... 17 Display...... 6 Create a message...... 17 Active standby ...... 6 Listen to a message...... 17

Copyright © 2007 Nokia. All rights reserved. v Memory full...... 17 Settings ...... 29 Folders...... 17 Groups ...... 29 E-mail application...... 18 Speed dials ...... 29 Setting wizard...... 18 Info, service, and my numbers.... 29 Write and send an e-mail...... 18 Download e-mail ...... 19 8. Call log...... 30 Read and reply to e-mail...... 19 Positioning information...... 30 E-mail folders...... 20 9. Settings...... 31 Spam filter ...... 20 Instant messaging ...... 20 Profiles...... 31 Access...... 20 Themes...... 31 Connect...... 21 Tones...... 31 Sessions ...... 21 Display ...... 31 Add IM contacts...... 22 Time and date...... 32 Block or unblock messages ...... 23 My shortcuts...... 32 Groups...... 23 Left selection key...... 33 Voice messages...... 23 Right selection key ...... 33 Info messages ...... 23 Navigation key...... 33 Service commands...... 24 Voice commands ...... 33 Delete messages...... 24 Connectivity...... 33 SIM messages ...... 24 Bluetooth wireless technology...... 34 Message settings ...... 24 Infrared ...... 35 Packet data...... 35 General settings ...... 24 Data transfer ...... 36 Text messages...... 24 Multimedia messages...... 25 USB data cable ...... 37 E-mail messages ...... 26 Call...... 38 Phone...... 38 7. Contacts ...... 27 Enhancements...... 39 Search for a contact ...... 27 Configuration ...... 40 Save names and phone Security ...... 41 numbers...... 27 Phone software updates...... 42 Save details ...... 27 Settings...... 42 Copy or move contacts ...... 27 Request a software update...... 42 Edit contact details...... 28 Install a software update...... 42 Synchronize all...... 28 Restore factory settings ...... 42 Delete contacts ...... 28 10. Operator menu...... 43 Business cards ...... 28

vi Copyright © 2007 Nokia. All rights reserved. 11. Gallery...... 44 Respond to a callback request ...... 56 Print images ...... 44 Add a one-to-one contact...... 56 Memory card...... 44 PTT settings ...... 56 Format the memory card...... 45 Configuration settings...... 57 Lock the memory card...... 45 Web ...... 57 Check memory consumption ...... 45 14. Organizer...... 58 12. Media ...... 46 Alarm clock ...... 58 Camera and video...... 46 Stop the alarm...... 58 Take an image...... 46 Calendar...... 58 Record a video clip...... 46 Make a calendar note...... 59 Camera and video options...... 47 Note alarm...... 59 Media player ...... 47 To-do list...... 59 Configuration for a streaming Notes...... 59 service ...... 47 Calculator ...... 59 Music player...... 47 Countdown timer ...... 60 Playing the music tracks...... 48 Stopwatch ...... 60 Music player options...... 48 Radio ...... 49 15. Applications ...... 61 Save radio frequencies ...... 49 Launch a game...... 61 Listen to the radio ...... 49 Launch an application...... 61 Voice recorder...... 50 Application options...... 61 Record sound ...... 50 Download an application ...... 61 Equalizer...... 51 Stereo widening ...... 51 16. SIM services ...... 63 13. Push to talk ...... 52 17. Web...... 64 PTT channels...... 52 Set up browsing...... 64 Create a channel...... 52 Connect to a service...... 64 Receive an invitation ...... 53 Browse pages...... 65 Switch PTT on and off ...... 53 Browse with phone keys...... 65 Make and receive a PTT call...... 54 Direct calling...... 65 Make a channel call...... 54 Bookmarks...... 65 Make a one-to-one call...... 54 Receive a bookmark ...... 65 Make a PTT call to multiple Appearance settings...... 66 recipients...... 54 Security settings...... 66 Receive a PTT call...... 55 Cookies...... 66 Callback requests...... 55 Scripts over secure connection...... 66 Send a callback request ...... 55 Download settings ...... 67

Copyright © 2007 Nokia. All rights reserved. vii Service inbox...... 67 Nokia Wireless Audio Gateway Service inbox settings...... 67 AD-42W...... 75 Cache memory...... 67 Carkit...... 76 Browser security...... 68 Nokia Multimedia Car Kit Security module ...... 68 CK-20W ...... 76 Certificates ...... 68 Data...... 76 Digital signature...... 69 Nokia 1 GB microSD Card MU-22...... 76 18. PC connectivity ...... 70 Nokia PC Suite...... 70 21. Care and maintenance...... 77 Packet data, HSCSD, and CSD..... 70 22. Additional safety Bluetooth ...... 70 information...... 78 Data communication Operating environment...... 78 applications...... 70 Medical devices...... 78 19. Battery information ...... 72 Pacemakers...... 78 Charging and discharging ...... 72 Vehicles ...... 79 Nokia battery authentication Potentially explosive guidelines...... 73 environments...... 79 Emergency calls ...... 80 20. Genuine Enhancements ..... 75 To make an emergency call: ...... 80 Power ...... 75 Certification information Audio...... 75 (SAR) ...... 81 Nokia Mini Speakers MD-4...... 75 Index...... 82

Read these simple guidelines. Not SWITCH OFF NEAR following them may be dangerous or BLASTING illegal. Read the complete user guide for Follow any restrictions. Do further information. not use the phone where blasting is in progress. SWITCH ON SAFELY Do not switch the phone on USE SENSIBLY when wireless phone use is Use only in the normal prohibited or when it may position as explained in the cause interference or danger. product documentation. Do not touch the antenna ROAD SAFETY COMES FIRST unnecessarily. Obey all local laws. Always keep your hands free to QUALIFIED SERVICE operate the vehicle while Only qualified personnel may driving. Your first install or repair this product. consideration while driving ENHANCEMENTS AND should be road safety. BATTERIES Use only approved INTERFERENCE enhancements and batteries. All wireless phones may be Do not connect incompatible susceptible to interference, products. which could affect performance. WATER-RESISTANCE Your phone is not SWITCH OFF IN HOSPITALS water-resistant. Keep it dry. Follow any restrictions. Switch the phone off near BACK-UP COPIES medical equipment. Remember to make back-up copies or keep a written SWITCH OFF IN AIRCRAFT record of all important Follow any restrictions. information stored in your Wireless devices can cause phone. interference in aircraft. CONNECTING TO OTHER SWITCH OFF WHEN DEVICES REFUELLING When connecting to any Do not use the phone at a other device, read its user refuelling point. Do not use guide for detailed safety near fuel or chemicals. instructions. Do not connect incompatible products.

Copyright © 2007 Nokia. All rights reserved. ix EMERGENCY CALLS ■ Network services Ensure the phone is switched on and in service. Press the To use the phone you must have service end key as many times as from a wireless service provider. Many of needed to clear the display the features in this device depend on and return to the start features in the wireless network to screen. Enter the emergency function. These network services may not number, then press the call be available on all networks or you may key. Give your location. Do have to make specific arrangements with not end the call until given your service provider before you can permission to do so. utilize network services. Your service provider may need to give you additional ■ About your device instructions for their use and explain what charges will apply. Some networks The wireless device described in this may have limitations that affect how you guide is approved for use on the EGSM can use network services. For instance, 900, and GSM 1800 and 1900 networks. some networks may not support all Contact your service provider for more language-dependent characters and information about networks. services. When using the features in this device, Your service provider may have requested obey all laws and respect the privacy and that certain features be disabled or not legitimate rights of others. activated in your device. If so, they will When taking and using images or video not appear on your device menu. Your clips, obey all laws and respect local device may also have been specially customs as well as privacy and legitimate configured for your network provider. rights of others including copyrights. This configuration may include changes in menu names, menu order and icons. Warning: To use any features in Contact your service provider for more this device, other than the information. alarm clock, the device must be switched on. Do not switch the This device supports WAP 2.0 protocols device on when wireless device (HTTP and SSL) that run on TCP/IP use may cause interference or protocols. Some features of this device, danger. such as multimedia messaging (MMS), browsing, e-mail application, instant messaging, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.

x Copyright © 2007 Nokia. All rights reserved. ■ Shared memory ■ Enhancements The following features in this device may A few practical rules about accessories share memory: gallery, contacts, text and enhancements: messages, multimedia messages, and • Keep all accessories and instant messages, e-mail, calendar, to-do enhancements out of the reach of notes, JavaTM games and applications, small children. and note application. Use of one or more • When you disconnect the power cord of these features may reduce the memory of any accessory or enhancement, available for the remaining features grasp and pull the plug, not the cord. sharing memory. For example, saving • Check regularly that enhancements many Java applications may use all of the installed in a vehicle are mounted available memory. Your device may and are operating properly. display a message that the memory is full when you try to use a shared memory • Installation of any complex car feature. In this case, delete some of the enhancements must be made by information or entries stored in the qualified personnel only. shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

■ Access codes PUK codes The personal unblocking key (PUK) Security code code and the universal personal The security code (5 to 10 digits) unblocking key (UPUK) code (8 helps to protect your phone against digits) is required to change a unauthorized use. The preset code is blocked PIN code and UPIN code, 12345. To change the code, and to respectively. The PUK2 code (8 digits) set the phone to request the code, is required to change a blocked PIN2 see ”Security” p. 41. code. If the codes are not supplied with the SIM card, contact your local PIN codes service provider for the codes. The personal identification number (PIN) code and the universal Barring password personal identification number The barring password (4 digits) is (UPIN) code (4 to 8 digits) help to required when using the Call barring protect your SIM card against service. See ”Security” p. 41. unauthorized use. See ”Security” p. 41. ■ Configuration settings The PIN2 code (4 to 8 digits) may be service supplied with the SIM card and is To use some of the network services, required for some functions. such as mobile Internet services, The module PIN is required to access MMS, Nokia Xpress audio the information in the security messaging, or remote Internet server module. See ”Security module” p. 68. synchronization, your phone needs The signing PIN is required for the the correct configuration settings. digital signature. See ”Digital For more information on availability, signature” p. 69. contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia Web site, www.nokia-asia.com/5300/support.

xii Copyright © 2007 Nokia. All rights reserved. When you have received the settings ■ Nokia support and as a configuration message, and the contact information settings are not automatically saved For the latest version of this guide, and activated, Configuration downloads, services and additional settings received is displayed. information related to your Nokia To save the settings, select Show > product, please visit Save. If required, enter the PIN code www.nokia-asia.com/5300/support supplied by the service provider. or your local Nokia web site. You To discard the received settings, may also download free select Exit or Show > Discard. configuration settings such as MMS, GPRS, e-mail, and other services for ■ Download content your phone model at www.nokia-asia.com/phonesettings. You may be able to download new content (for example, themes) to the Should you still require assistance, phone (network service). You may please refer to also be able to download updates of www.nokia-asia.com/contactus. phone software (network service). To check for the nearest Nokia care See ”Phone” p. 38, Phone updates. center location for maintenance For the availability of different services, you may like to visit services, pricing, and tariffs, contact www.nokia-asia.com/repair. your service provider. Important: Use only services that you trust and that offer adequate security and protection against harmful software.

■ Install SIM card and Open the SIM card holder (4), and battery insert the SIM card properly into the holder (5). Close the SIM card holder Always switch the device off and (6). disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with BL-5B battery. Always use original Replace the battery (7). Slide the Nokia batteries. See ”Nokia battery back cover into its place (8, 9). authentication guidelines” p. 73. To remove the back cover of the phone, push the back cover release button (1), and detach the back cover away from the phone (2). Remove the battery as shown (3).

■ Insert a Use only microSD cards approved by microSD card Nokia for use with this device. Nokia utilizes the approved industry Keep all microSD memory cards out standards for memory cards but not of the reach of small children. all other brands may function 1. Remove the back cover of the correctly or be fully compatible with phone. this device. 2. Insert the card into the microSD card slot with the contact surface ■ Remove the microSD facing backwards, and press it card until it locks into place. Important: Do not remove the microSD card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. 3. Close the back cover of the 1. Make sure that no application is phone. currently accessing the microSD Use only compatible microSD cards memory card. with this device. Other memory 2. Remove the back cover of the cards, such as reduced size phone. multimedia cards, do not fit in the 3. Press the microSD card slightly in microSD card slot and are not to release the lock, and remove compatible with this device. Using the microSD card from the slot. an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

■ Charge the battery The charging time depends on the charger used. Charging a BL-5B Check the model number of any battery with the AC-3 charger takes charger before use with this device. approximately 3 hours while the This device is intended for use when phone is in the standby mode. supplied with power from an AC-3 or AC-4 charger. ■ Warning: Use only Open the slide phone batteries, chargers, and To open the slide of the phone, push enhancements approved by the upper part of the phone up. Nokia for use with this particular model. The use of ■ Switch the phone on any other types may and off invalidate any approval or Warning: Do not switch the warranty, and may be phone on when wireless dangerous. phone use is prohibited or For availability of approved when it may cause enhancements, please check with interference or danger. your dealer. When you disconnect Press and hold the power key. See the power cord of any enhancement, ”Keys and parts” p. 5. If the phone grasp and pull the plug, not the cord. asks for a PIN or a UPIN code, enter Connect the charger to a wall socket the code (displayed as ****), and and the lead from the charger to the select OK. socket on the bottom of your phone. Set the time and date Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See ”Time and date” If the battery is completely p. 32. discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

Plug and play service ■ Headset When you switch on your phone for The headset in the sales box has the first time, and the phone is in the been approved by Nokia for use with standby mode, you may be asked to this device. Always listen to music at get the configuration settings from a moderate level. Please be advised your service provider (network to pay special attention to volume service). Confirm or decline the level in case you connect any other query. See "Connect to support," headsets to the device. p. 40, and ”Configuration settings Do not connect products that create service” p. xii. an output signal as this may cause damage to the device. Do not ■ Antenna connect any voltage source to this Your device has an internal antenna. connector. Note: As with any other radio transmitting device, Audio adaptor do not touch the antenna Use an audio adaptor AD-50 to unnecessarily when the connect a headphone with a 3.5-mm device is switched on. plug to your phone. If the adaptor is Contact with the antenna connected to the phone the earpiece affects call quality and may of the phone will be disconnected. cause the device to operate Please note that the adaptor does at a higher power level than not support a microphone line. otherwise needed. Avoiding contact with the antenna ■ area when operating the Phone strap device optimizes the antenna performance and the battery life.

Thread a strap through the eyelet of the phone as shown in the picture and tighten it.

■ Keys and parts Earpiece (1) Music player, skip, rewind (2) Music player, start, pause (3) Enhancements connector (4) Music player, skip, forward (5) Call key (6) Left, middle, and right selection keys (7) End key (8) Scroll keys (9) Keypad (10) Charger connector (11) USB connector (12) Power key (13) Phone strap eyelet (14) Camera lens (15) Volume up/PTT key (16) Volume down (17) Camera key (18) Infrared port (19) Self-portrait viewfinder (20) Loudspeaker (21)

■ Standby mode p. 33. Operator variants may have an operator-specific name. When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. Active standby In the active standby mode there is a Display list of selected phone features and information on the screen that you can directly access. To switch it on or off, select Menu > Settings > Display > Active standby > Active standby mode > On or Off. In the standby mode, scroll up or down to activate the navigation in the list, and select Select or View. Left and right arrows at the beginning and end of a line indicate that further information is available Signal strength of the cellular by scrolling left or right. To end the network (1) active standby mode, select Exit. Battery charge status (2) To organize and change the active Indicators (3) standby mode, activate the Network name or operator logo (4) navigation mode, and select Options and from the available options. Clock (5) Main screen (6) Indicators Function of left selection key (7) is Unread messages. Go to or a shortcut to another function. See ”Left selection key” Unsent, canceled, or failed p. 33. messages. Function of middle selection key (8) Missed call. is Menu. , Connected to the instant Function of right selection key (9) is messaging service, and the Names or a shortcut to another availability status is online function. See ”Right selection key” or offline.

One or several instant The loudspeaker is activated, messages received. or the music stand is connected to the phone. Keypad is locked. Calls are limited to a closed The phone does not ring for user group. an incoming call or text message. The timed profile is selected. The alarm clock is activated. , , , or A headset, hands-free, The countdown timer is loopset, or music stand running. enhancement is connected The stopwatch is running. to the phone. , The phone is registered to ■ the GPRS or EGPRS network. Flight mode You can deactivate all radio , A GPRS or EGPRS frequency functionality and still connection is established. have access to offline games, , The GPRS or EGPRS calendar, and phone numbers. Use connection is suspended (on the flight mode in radio sensitive hold). environments—on board aircraft or in hospitals. When the flight mode is A Bluetooth connection is active, is shown. active. Select Menu > Settings > Profiles > , Push-to-talk connection is Flight > Activate or Personalise. active or suspended. To deactivate the flight mode, select If you have two phone lines, any other profile. the second phone line is In the flight mode you can make an selected. emergency call. Enter the emergency All incoming calls are number, press the call key, and select diverted to another number. Yes when asked Exit flight profile? The phone attempts to make an emergency call.

■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, close the phone, and select Lock within 3.5 seconds. To unlock the keypad, select Unlock > Ok, or open the phone. If the security keyguard is activated, enter the security code if requested. To answer a call when the keyguard is on, press the call key or open the phone. When you end or reject the call, the keypad automatically locks. For Security keyguard, see ”Phone” p. 38. When the keyguard is on, calls may be possible to the official emergency number programmed into your device.

■ Functions without a SIM card Several functions of your phone may be used without installing a SIM card (for example, the data transfer with a compatible PC or another compatible device). Some functions appear dimmed in the menus and cannot be used. For an emergency call, some networks may require that a valid SIM card is properly inserted in the device.

■ Make a call Speed dialing 1. Enter the phone number, Assign a phone number to one of the including the area code. speed-dialing keys, 2 to 9. See For international calls, press * ”Speed dials” p. 29. Call the number twice for the international prefix in either of the following ways: (the + character replaces the • Press a speed-dialing key, then international access code), enter the call key. the country code, the area code •If Speed dialling is set to On, without the leading 0, if press and hold a speed-dialing necessary, and the phone key until the call begins. See number. Speed dialling in ”Call” p. 38. 2. To call the number, press the call key. Enhanced voice dialing To increase the volume in a call, You can make a phone call by saying press + and to decrease, press - . the name that is saved in the contact 3. To end the call or to cancel the list of the phone. Voice commands call attempt, press the end key, or are language-dependent. To set the close the phone. language, see Recognition lang. in ”Phone” p. 38. To search for a name or phone number that you have saved in Note: Using voice tags may Contacts, see ”Search for a contact” be difficult in a noisy p. 27. Press the call key to call the environment or during an number. emergency, so you should not rely solely upon voice To access the list of dialed numbers, dialing in all circumstances. press the call key once in the standby mode. To call the number, 1. In the standby mode, press and select a number or name, and press hold the right selection key, or the call key. press and hold the volume down key. A short tone is played, and Speak now is displayed.

2. Say the voice command clearly. If ■ Options during a call the voice recognition is Many of the options that you can successful, a list with matches is use during a call are network shown. The phone plays the voice services. For availability, contact command of the match on the your service provider. top of the list. If the result is not the correct one, scroll to another During a call, select Options and entry. from the following options: Using voice commands to carry Call options are Mute or Unmute, out a selected phone function is Contacts, Menu, Lock keypad, similar to voice dialing. See Voice Record, Voice clarity, Loudspeaker or commands in ”My shortcuts” Handset. p. 32. Network services options are Answer or Reject, Hold or Unhold, New call, ■ Answer or reject a call Add to conference, End call, End all calls, and the following: To answer an incoming call, press the call key, or open the phone. To Send DTMF — to send tone strings. end the call, press the end key, or Swap — to switch between the close the phone. active call and the call on hold. To reject an incoming call, press the Transfer — to connect a call on hold end key. To mute the ringing tone, to an active call and disconnect select Silence. yourself. Conference — to make a conference Call waiting call. To answer the waiting call during an Private call — to discuss privately in active call (network service), press a conference call. the call key. The first call is put on Warning: Do not hold the hold. To end the active call, press the device near your ear when end key. the loudspeaker is in use, To activate the Call waiting function, because the volume may be see ”Call” p. 38. extremely loud.

To enter text (for example, when ■ Predictive text input writing messages), use traditional or Predictive text input is based on a predictive text input. When you built-in dictionary to which you can write text, press and hold Options to also add new words. toggle between traditional text input, indicated by , and 1. Start writing a word using the predictive text input, indicated by keys, 2 to 9. Press each key only . Not all languages are once for one letter. supported by predictive text input. 2. When you finish writing the word The character cases are indicated by and it is correct, to confirm it by , , and . To change the adding a space, press 0. character case, press #. To change If the word is not correct, press * from the letter to number mode, repeatedly, and select the word indicated by , press and hold #, from the list. and select Number mode. To change If the ? character is displayed from the number to the letter mode, after the word, the word you press and hold #. intended to write is not in the To set the writing language, select dictionary. To add the word to the Options > Writing language. dictionary, select Spell. Enter the word using traditional text input, ■ Traditional text input and select Save. Press a number key, 1 to 9, To write compound words, enter repeatedly until the desired the first part of the word, and character appears. The characters press the scroll key right to available depend on the selected confirm it. Write the last part of writing language. If the next letter the word, and confirm the word. you want is located on the same key 3. Start writing the next word. as the present one, wait until the cursor appears and enter the letter. The most common punctuation marks and special characters are available under the number key 1.

The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List, Grid, Grid with labels, or Tab. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2. Scroll through the menu, and select an option (for example, Settings). 3. If the selected menu contains further submenus, select the one that you want (for example, Call). 4. If the selected menu contains further submenus, repeat step 3. 5. Select the setting of your choice. 6. To return to the previous menu level, select Back. To exit the menu, select Exit.

You can read, write, send, and save language options like Chinese, take text, multimedia, e-mail, audio, and up more space limiting the number flash messages and postcards. All of characters that can be sent in a messages are organized into folders. single message. An indicator at the top of the display ■ Text message shows the total number of With the short message service characters left and the number of (SMS) you can send and receive text messages needed for sending. For messages, and receive messages that example, 673/2 means that there are can contain pictures (network 673 characters left and that the service). message will be sent as a series of 2 messages. Before you can send any text or SMS e-mail message, you must save your message center number. See Write and send a message ”Message settings” p. 24. 1. Select Menu > Messaging > To check SMS e-mail service Create message > Text message. availability and to subscribe to the 2. Enter one or more phone service, contact your service numbers or e-mail addresses in provider. To save an e-mail address the To: field. To retrieve a phone in Contacts, see ”Save details” p. 27. number or e-mail address from a Your device supports the sending of memory, select Add. text messages beyond the character 3. For a SMS e-mail, enter a subject limit for a single message. Longer in the Subject: field. messages will be sent as a series of 4. Write your message in the two or more messages. Your service Message: field. provider may charge accordingly. 5. To send the message, select Send. Characters that use accents or other See ”Message sending” p. 15. marks, and characters from some

Read and reply to a message inserted image exceeds this limit, 1. To view a received message, the device may make it smaller so select Show. To view it later, that it can be sent by MMS. select Exit. 1. Select Menu > Messaging > To read the message later, select Create message > Multimedia. Menu > Messaging > Inbox. 2. Write your message. To add a file, 2. To reply to a message, select select Insert and from the Reply and the message type. options. 3. Write the reply message. 3. To view the message before sending it, select Options > 4. To send the message, select Send. Preview. See ”Message sending” p. 15. 4. To send the message, select Send. See ”Message sending” p. 15. ■ Multimedia message 5. Enter one or more phone Note: Only devices that numbers or e-mail addresses in have compatible features the To: field. To retrieve a phone can receive and display number or e-mail address from a multimedia messages. The memory, select Add. appearance of a message may vary depending on the 6. To send the message, select Send. receiving device. See ”Message sending” p. 15. A multimedia message can contain some attachments. Write and send a multimedia plus message To check availability and to subscribe to the multimedia The wireless network may limit the messaging service (MMS, network size of MMS messages. If the service), contact your service inserted image exceeds this limit, provider. See ”Message settings” the device may make it smaller so p. 24. that it can be sent by MMS. Any content can be added to the Write and send a multimedia multimedia plus message. Such message content might be images, video clips, sound clips, business cards, calendar The wireless network may limit the notes, themes, streaming links, or size of multimedia messages. If the

14 Copyright © 2007 Nokia. All rights reserved. Messaging even unsupported files (for example, Note: When the phone is files received with an e-mail). sending the message, the 1. Select Menu > Messaging > animated is shown. This Create message > Multimedia is an indication that the plus. message has been sent by your device to the message 2. Enter one or more phone center number programmed numbers or e-mail addresses in into your device. This is not the To: field. To retrieve a phone an indication that the number or e-mail address from a message has been received memory, select Add. at the intended destination. 3. Enter a subject and write your For more details about message. messaging services, check 4. To add a file, select Insert and with your service provider. from the options. If an interruption occurs while the 5. To view the message before message is being sent, the phone sending it, select Options > tries to resend the message a few Preview. times. If these attempts fail, the 6. To send the message, select Send. message remains in the Outbox See ”Message sending” p. 15. folder. To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Message sending Options > Cancel sending. Copyright protections may prevent some images, music (including Read and reply to a message ringing tones), and other content from being copied, modified, Important: Exercise caution transferred or forwarded. when opening messages. Multimedia message To send the message, select Send. objects may contain The phone saves the message in the malicious software or Outbox folder, and the sending otherwise be harmful to starts. your device or PC.

1. To view a received message, Before you can use the postcard select Show. To view it later, service you must subscribe to the select Exit. service. To check the availability, and 2. To view the whole message if the costs, and to subscribe to the received message contains a service, contact your network presentation, select Play. operator or service provider. To view the files in the To send a postcard, select Menu > presentation or the attachments, Messaging > Create message > select Options > Objects or Postcard. Fill in the address, Attachments. mandatory editor fields are marked by a *. Scroll to the image field, 3. To reply to the message, select select Insert and an image from the Options > Reply and the gallery, or New image to insert a message type. recent image; then write your 4. Write the reply message. greeting text. To send the message, 5. To send the message, select Send. select Send. See ”Message sending” p. 15. ■ Flash messages ■ Postcards Flash messages are text messages With the postcard messaging service that are instantly displayed upon (network service), create and send reception. Flash messages are not postcards that may contain an automatically saved. image and a greeting text. The postcard is sent to the service Write a message provider using multimedia Select Menu > Messaging > Create messaging. The service provider message > Flash message. Enter the prints the postcard and sends it to recipient’s phone number and write the postal address given with the your message. To have a blinking message. MMS must be activated text, select Options > Insert blink before this service can be used. charact.. To end the blinking text range set a second marker.

Receive a message Listen to a message A received flash message is indicated To open a received audio message, with Message: and a few words from select Play; or if more than one the beginning of the message. To message is received, select Show > read the message, select Read. To Play. To listen to the message later, extract numbers and addresses from select Exit. the current message, select Options > Use detail. To save the ■ Memory full message, select Save and the folder When you receive a message, and in which you want to save it. the memory for the messages is full, ■ Memory full. Unable to receive Nokia Xpress audio messages. is shown. To first delete messaging old messages, select OK > Yes and You can use the MMS to create and the folder. Scroll to the desired send a audio message in a message, and select Delete. If more convenient way. MMS must be messages are to be deleted, select activated before you can use audio Mark. Mark all the messages you messages. want to delete, and select Options > Delete marked. Create a message ■ 1. Select Menu > Messaging > Folders Create message > Audio The phone saves received messages message. The recorder opens. To in the Inbox folder. use the recorder, see ”Voice Messages that have not yet been recorder” p. 50. sent are saved in the Outbox folder. 2. Speak your message. To set the phone to save the sent 3. Enter one or more phone messages in the Sent items folder, numbers in the To: field, or select see Save sent messages in ”General Add to retrieve a number. settings” p. 24. 4. To send the message, select Send. To edit and send messages that you have written and saved in the Drafts folder, select Menu > Messaging > Drafts.

You can move your messages to the Check your e-mail settings with your Saved items folder. To organize your e-mail service provider. You may Saved items subfolders, select receive the e-mail configuration Menu > Messaging > Saved items. settings as a configuration message. To add a folder, select Options > Add See ”Configuration settings service” folder. To delete or rename a folder, p. xii. scroll to the desired folder, and To activate the e-mail settings, select Options > Delete folder or select Menu > Messaging > Rename folder. Message settings > e-mail Your phone has templates. To create messages. See ”E-mail messages” a new template, save a message as a p. 26. template. To access the template list, This application does not support select Menu > Messaging > Saved keypad tones. items > Templates. ■ Setting wizard E-mail application The setting wizard will start The e-mail application uses a packet automatically if no e-mail settings data connection (network service) to are defined in the phone. To enter allow you to access your e-mail the settings manually, select account. This e-mail application is Menu > Messaging > e-mail > different from the SMS e-mail Options > Manage accounts > function. To use the e-mail function Options > New. on your phone, you need a The Manage accounts options allow compatible e-mail system. you to add, delete, and change the You can write, send, and read e-mail e-mail settings. with your phone. Your phone supports POP3 and IMAP4 e-mail Write and send an e-mail servers. You can write your e-mail message Before you can send and retrieve any before connecting to the e-mail e-mail messages, you must obtain a service; or connect to the service new e-mail account or use your first, then write and send your current account. To check the e-mail. availability of your e-mail account, contact your e-mail service provider. 1. Select Menu > Messaging > E-mail > Write new e-mail.

2. If more than one e-mail account The e-mail application only is defined, select the account downloads e-mail headers at from which you want to send the first. e-mail. 2. Select Back > Inboxes, the 3. Enter the recipient’s e-mail account name, and the new address, write the subject, and message, and select Retrieve to enter the e-mail message. To download the complete e-mail attach a file from Gallery, select message. Options > Attach file. To download new e-mail messages 4. To send the e-mail message, and to send e-mail that has been select Send > Send now. saved in the Outbox folder, select To save the e-mail in the Outbox Options > Send/check e-mail. folder to be sent later, select Send > Send later. Read and reply to e-mail To edit or continue writing your Important: Exercise caution e-mail later, select Options > when opening messages. Save as draft. The e-mail is saved E-mail messages may in Outboxes > Drafts. contain malicious software To send the e-mail later, select or otherwise be harmful to Menu > Messaging > E-mail > your device or PC. Options > Send now or 1. Select Menu > Messaging > Send/check e-mail. E-mail > Inboxes, the account name, and the desired message. Download e-mail 2. To reply to an e-mail, select 1. To download e-mail messages Reply > Original text or Empty that have been sent to your message. To reply to many, select e-mail account, select Menu > Options > Reply to all. Confirm or Messaging > E-mail > Check new edit the e-mail address and e-mail. subject; then write your reply. If more than one e-mail account 3. To send the message, select is defined, select the account Send > Send now. from which you want to download the e-mail.

E-mail folders ■ Instant messaging Your phone saves e-mail that you With instant messaging (IM, have downloaded from your e-mail network service) you can send short, account in the Inboxes folder. The simple text messages to online users. Inboxes folder contains the You have to subscribe to a service following folders: “Account name” and register with the IM service you for incoming e-mail, Archive for want to use. For more information archiving e-mail, Custom 1—Custom about signing up for IM services, 3 for sorting e-mail, Junk where all contact your service provider. spam e-mail is stored, Drafts for To set the required settings for the saving unfinished e-mail, Outbox for IM service, see Connection settings saving e-mail that has not been sent, in ”Access” p. 20. The icons and texts and Sent items for saving e-mail on the display may vary, depending that has been sent. on the IM service. To manage the folders and their Note: Depending on your e-mail content, select Options to IM service, you may not view the available options of each have access to all of the folder. features described in this guide. Spam filter To activate and define a spam filter, Access select Options > Spam filter > Select Menu > Messaging > IMs. Settings in the main e-mail idle IMs may be replaced by another screen. The spam filter allows you to term depending on the service put specific senders on a black or provider. If more than one set of white list. Black list sender messages connection settings for IM service is are filtered to the junk folder. available, select the one you want. Unknown and white list sender Select from the following options: messages are downloaded into the account inbox. To blacklist a sender, Login — to connect to the IM service. select the e-mail message in the To set the phone to automatically Inboxes folder and Options > connect to the IM service when you Blacklist sender. switch on the phone; in the login session, select Automatic login: >

On, or select Menu > Messaging > Conversations — shows the list of IMs, connect to the IM service, and new and read instant messages or select Options > Settings > invitations to IM during the active Automatic login > On. IM session. Saved conversations — to view, indicates a new group message. erase, or rename the conversations indicates a read group message. that you saved during an IM session. indicates a new instant message. Connection settings — to edit the indicates a read instant message. settings needed for messaging. indicates an invitation. Connect The icons and texts on the display To connect to the service, access the depends on the IM service. instant messages menu, select the Online — shows the number of IM service, if needed, and select contacts that are online. Login. Offline — shows the number of To disconnect from the IM service, contacts that are offline. select Options > Logout. To start a conversation, expand the Online or the Offline folder, and Sessions scroll to the contact with whom you When connected to the service, your would like to chat, and select Chat. status, as seen by others, is shown in To answer an invitation or to reply to a status line: My status: Online, My a message, expand the status: Busy or Status: Appear off. — Conversations folder, scroll to the to change own status, select contact to whom you would like to Change. chat, and select Open. To add contacts, see ”Add IM contacts” Below the status line there are three p. 22. folders containing your contacts and showing their status: Conversations, Groups > Public groups (not visible if Online and Offline. To expand the groups are not supported by the folder, scroll to it, and select Expand network) — The list of bookmarks to (or press scroll right); to collapse the public groups provided by the service folder, select Collapse (or press scroll provider is displayed. To start a IM left). session with a group, scroll to a group, and select Join. Enter the screen name that you want to use as

Copyright © 2007 Nokia. All rights reserved. 21 Messaging your nickname in the conversation. message is received, select a When you have successfully joined message and Open. the group conversation, you can New messages received during an start a group conversation. You can active conversation are held in IMs > create a private group. See ”Groups” Conversations. If you receive a p. 23. message from someone who is not in Search > Users or Groups — to IM contacts, the sender ID is search for other IM users or public displayed. To save a new contact groups on the network by phone that is not in the phone memory, number, screen name, e-mail select Options > Save contact. address, or name. If you select Groups, you can search for a group Participate in a conversation by a member in the group, or by To join or start an IM session, write group name, topic, or ID. your message, and select Send. Options > Chat or Join group — to If you receive a new message during start the conversation when you a conversation from a person who is have found the user or the group not taking part in the current that you want. conversation, is displayed, and the phone sounds an alert tone. Accept or reject an invitation Write your message, and select If you receive a new invitation, to Send. Your message is displayed, and read it, select Read. If more than one the reply message is displayed below invitation is received, select an your message. invitation and Open. To join the private group conversation, select Add IM contacts Accept, and enter the screen name you want to use as your nickname. When connected to the IM service, To reject or delete the invitation, in the IM main menu, select select Options > Reject or Delete. Options > Add contact > By mobile number, Enter ID manually, Search Read an instant message from server, or Copy from server If you receive a new message that is (depending on service provider). not a message associated with an Scroll to a contact. To start a active conversation, New instant conversation, select Chat. message is displayed. To read it, select Read. If more than one

Block or unblock messages Private When you are in a conversation and Connect to the IM service, and from want to block messages, select the main menu, select Options > Options > Block contact. Create group. Enter the name for the group and the screen name that you To block messages from a specific want to use as your nickname. Mark contact in your contacts list, scroll the private group members in the to the contact in Conversations, contacts list, and write an invitation. Online, or Offline, and select Options > Block contact > OK. ■ Voice messages To unblock a contact, in the IM main menu, select Options > Blocked list. The voice mailbox is a network Scroll to the contact you want to service to which you may need to unblock, and select Unblock > OK. subscribe. For more information contact your service provider. Groups To call your voice mailbox, select Menu > Messaging > Voice You can use the public groups messages > Listen to voice msgs.. To provided by the service provider, or enter, search for, or edit your voice create your own private groups for mailbox number, select Voice an IM conversation. mailbox no.. Public If supported by the network, You can bookmark public groups indicates new voice messages. To that your service provider may call your voice mailbox number, maintain. Connect to the IM service, select Listen. and select Groups > Public groups. Select a group and Join. If you are ■ Info messages not in the group, enter your screen name as your nickname for the You can receive messages on various group. To delete a group from your topics from your service provider list, select Options > Delete group. (network service). For more information, contact your service To search for a group, select provider. Select Menu > Groups > Public groups > Search Messaging > Info messages and groups. from the available options.

■ Service commands Save sent messages > Yes — to set the phone to save the sent messages Write and send service requests in the Sent items folder. (USSD commands) to your service provider (such as activation Overwriting in Sent > Allowed — to commands for network services). set the phone to overwrite the old Select Menu > Messaging > Serv. sent messages with the new ones commands. when the message memory is full. This setting is shown only if you set ■ Delete messages Save sent messages > Yes. Font size — to select the font size To delete messages, select Menu > used in messages. Messaging > Delete messages > By message to delete single messages, Graphical smileys > Yes — to set the By folder to delete all messages from phone to replace character-based a folder, or All messages. smileys with graphical ones.

■ SIM messages Text messages SIM messages are specific text The text message settings affect the messages that are saved to your SIM sending, receiving, and viewing of card. You can copy or move those text and SMS e-mail messages. messages from the SIM to the phone Select Menu > Messaging > memory, but not vice versa. To read Message settings > Text messages SIM messages, select Menu > and from the following options: Messaging > Options > SIM Delivery reports > Yes — to ask the messages. network to send delivery reports about your messages (network ■ Message settings service). Message centres > Add centre — to General settings set the phone number and name of General settings are common for the message center that is required text and multimedia messages. for sending text messages. You Select Menu > Messaging > receive this number from your Message settings > General settings service provider. and from the following options:

Msg. centre in use — to select the configuration message. See message center in use. ”Configuration settings service” E-mail msg. centres > Add centre — p. xii. You can also enter the settings to set the phone numbers and name manually. See ”Configuration” p. 40. of the e-mail center for sending SMS Select Menu > Messaging > e-mails. Message settings > Multimedia E-mail centre in use — to select the messages and from the following SMS e-mail message center in use. options: Message validity — to select the Delivery reports > Yes — to ask the length of time for which the network network to send delivery reports attempts to deliver your message. about your messages (network service). Messages sent via — to select the format of the messages to be sent: Img. size (MMS plus) — to set the Text, Paging, or Fax (network image size in multimedia plus service). messages. Use packet data > Yes — to set GPRS Image size (MMS) — to set the image as the preferred SMS bearer. size in multimedia messages. Character support > Full — to select Default slide timing — to define the all characters in the messages to be default time between slides in sent as viewed. If you select multimedia messages. Reduced, characters with accents Allow MMS receptn. > Yes or No — and other marks may be converted to receive or block the multimedia to other characters. message. If you select In home Rep. via same centre > Yes — to network, you cannot receive allow the recipient of your message multimedia messages when outside to send you a reply using your your home network. The default message center (network service). setting of the multimedia message service is generally In home network. Multimedia messages The availability of this menu depends on your phone. The message settings affect the Incoming MMS msgs. — to allow the sending, receiving, and viewing of reception of multimedia messages multimedia messages. You may automatically, manually after being receive the configuration settings prompted, or to reject the reception. for multimedia messaging as a

This setting is not shown if Allow Select Menu > Messaging > MMS receptn. is set to No. Message settings > E-mail messages Allow adverts — to receive or reject and from the following options: advertisements. This setting is not Configuration — to select the set shown if Allow MMS receptn. is set that you want to activate. to No, or Incoming MMS msgs. is set Account — to select an account to Reject. provided by the service provider. Configuration sett. > Configuration My name — to enter your name or — Only the configurations that nickname. support multimedia messaging are E-mail address — to enter your shown. Select a service provider, e-mail address. Default, or Personal config. for multimedia messaging. Select Login information — to enter Account and a MMS account information according to the server contained in the active type. configuration settings. Incoming mail sett. — to select the maximum number of mails that shall E-mail messages be retrieved. The settings affect the sending, Outgoing sett. (SMTP) — to enter receiving, and viewing of e-mail. You SMTP (simple mail transfer protocol) may receive the settings as a information and setting options configuration message. See used when sending e-mail. ”Configuration settings service” Displ. term. window > Yes — to p. xii. You can also enter the settings perform manual user authentication manually. See ”Configuration” p. 40. for intranet connections.

You can save names and phone ■ Save details numbers (contacts) in the phone In the phone memory you can save memory and in the SIM card different types of phone numbers, a memory. tone or a video clip, and short text The phone memory may save items for a contact. contacts with additional details, The first number you save is such as various phone numbers and automatically set as the default text items. You can also save an number and is indicated with a image for a limited number of frame around the number type contacts. indicator (for example, ). When The SIM card memory can save you select a name from contacts (for names with one phone number example, to make a call), the default attached to them. The contacts number is used unless you select saved in the SIM card memory are another number. indicated by . Make sure that the memory in use is Phone or Phone and SIM. See ■ Search for a contact ”Settings” p. 29. Select Menu > Contacts > Names. Search for the contact to which you Scroll through the list of contacts, or want to add a detail, and select enter the first characters of the Details > Options > Add detail. name you are searching for. Select from the options available.

■ Save names and phone ■ Copy or move contacts numbers To copy or move a contact from the Names and numbers are saved in the phone contact memory to the SIM used memory. To save a name and card memory, or vice versa, select phone number, select Menu > Menu > Contacts > Names. Select Contacts > Names > Options > Add the contact to copy or move and new contact. Options > Copy contact or Move contact.

To copy or move several contacts, ■ Delete contacts select the first contact to copy or To delete all the contacts and the move and Options > Mark. Mark the details attached to them from the other contacts, and select Options > phone or SIM card memory, select Copy marked or Move marked. Menu > Contacts > Del. all To copy or move all contacts from contacts > From phone memory or the phone contact memory to the From SIM card. SIM card memory, or vice versa, To delete a contact, search for the select Menu > Contacts > Copy desired contact, and select contacts or Move contacts. Options > Delete contact. The SIM card memory can save To delete a number, text item, or an names with one phone number image attached to the contact, attached to them. search for the contact, and select Details. Scroll to the desired detail, ■ Edit contact details and select Options > Delete and Search for the contact, and select from the options available. Details. To edit a name, number, or text item or to change the image, ■ Business cards select Options > Edit. To change the You can send and receive a person’s number type, scroll to the desired contact information from a number, and select Options > compatible device that supports the Change type. To set the selected vCard standard as a business card. number as the default number, select Set as default. To send a business card, search for the contact whose information you ■ want to send, and select Details > Synchronize all Options > Send business card. Synchronize your calendar, contacts When you have received a business data, and notes with a remote card, select Show > Save to save the Internet server (network service). For business card in the phone memory. details see ”Synchronize from a To discard the business card, select server” p. 37. Exit > Yes.

■ Settings the speed-dialing number that you want. Select Menu > Contacts > Settings and from the following options: Select Assign, or if a number has already been assigned to the key, Memory in use — to select the SIM select Options > Change. Select card or phone memory for your Search and the contact you want to contacts. Select Phone and SIM to assign. If the Speed dialling function recall names and numbers from both is off, the phone asks whether you memories. In that case, when you want to activate it. See also Speed save names and numbers, they are dialling in ”Call” p. 38. saved in the phone memory. To make a call using the speed- Contacts view — to select how the dialing keys, see ”Speed dialing” p. 9. names and numbers in Contacts are displayed. ■ Name display — to select whether Info, service, and my the contact’s first or last name is numbers displayed first. Select Menu > Contacts and from Font size — to set the font size for one of these submenus: the list of contacts. Info numbers — to call the Memory status — to view the free information numbers of your service and used memory capacity. provider if the numbers are included on your SIM card (network service). ■ Groups Service numbers — to call the service numbers of your service provider if Select Menu > Contacts > Groups to the numbers are included on your arrange the names and phone SIM card (network service). numbers saved in the memory into caller groups with different ringing My numbers — to view the phone tones and group images. numbers assigned to your SIM card, if the numbers are included on your SIM card. ■ Speed dials To assign a number to a speed- dialing key, select Menu > Contacts > Speed dials, and scroll to

The phone registers your missed, Some timers may be reset received, and dialed calls if the during service or software network supports it and the phone is upgrades. switched on and within the network service area. ■ Positioning information To view the information on your The network may send you a calls, select Menu > Log > Missed positioning request (network calls, Received calls, or Dialled service). Contact your service numbers. To view your recent missed provider to subscribe and to agree and received calls and the dialed upon the delivery of positioning numbers chronologically, select Call information. log. To view the contacts to whom To accept or reject the positioning you most recently sent messages, request, select Accept or Reject. If select Msg. recipients. you miss the request, the phone To view the approximate automatically accepts or rejects it information on your recent according to what you have agreed communications, select Menu > with your network operator or Log > Call duration, Data counter, or service provider. The phone displays Pack. data timer. 1 missed position request. To view To view how many text and the missed positioning request, multimedia messages you have sent select Show. and received, select Menu > Log > To view the information on the 10 Message log. most recent privacy notifications Note: The actual invoice for and requests or to delete them, calls and services from your select Menu > Log > Positioning > service provider may vary, Position log > Open folder or Delete depending on network all. features, rounding off for billing, taxes, and so forth.

■ Profiles Theme downloads — to open a list of links to download more themes. Your phone has various setting groups called profiles, for which you can customize the phone tones for ■ Tones different events and environments. You can change the tone settings of Select Menu > Settings > Profiles, the selected active profile. the desired profile and from the Select Menu > Settings > Tones. You following options: can find the same settings in the Activate — to activate the selected Profiles menu. See Personalise in profile. ”Profiles” p. 31. Personalise — to personalize the To set the phone to ring only for calls profile. Select the setting you want from phone numbers that belong to to change, and make the changes. a selected caller group, select Alert for. Scroll to the caller group you Timed — to set the profile to be want or All calls, and select Mark. active until a certain time (up to 24 hours) and set the end time. Select Options > Save to save the When the time set for the profile settings or Cancel to leave the expires, the previous profile that was settings unchanged. not timed becomes active. If you select the highest ringing tone level, the ringing tone reaches its ■ Themes highest level after a few seconds. A theme contains elements for personalizing your phone. ■ Display Select Menu > Settings > Themes Select Menu > Settings > Display and from the following options: and from the available options: Select theme — to set a theme. A list Wallpaper — to add the background of folders in Gallery opens. Open the image in the standby mode. Themes folder, and select a theme.

Active standby — to switch the ■ Time and date active standby mode on or off and to To change the time, time zone, and organize and personalize the active date settings, select Menu > standby mode. Settings > Time and date > Time, Standby font colour — to select the Date, or Auto-update of time color for the texts in the standby (network service). mode. When traveling to a different time Navigation key icons — to display the zone, select Menu > Settings > Time icons of the current navigation key and date > Time > Time zone and the shortcuts in the standby mode when time zone of your location in terms active standby is off. of the time difference with respect Slide animation — to set your phone to Greenwich Mean Time (GMT) or to display an animation and sound a Universal Time Coordinated (UTC). tone when you open and close the The time and date are set according phone depending on the theme. to the time zone and enable your Screen saver > On — to set your phone to display the correct sending phone to display a screen saver. To time of received text or multimedia download more screen savers, select messages. For example, GMT -5 Graphic downloads. To set the time denotes the time zone for New York after which the screen saver is (USA), 5 hours west of activated, select Time-out. Greenwich/London (UK). Power saver — to save some battery Use for India (New Delhi) GMT +5.5, power. The date and a digital clock for Thailand/Indonesia/Vietnam are displayed when no function of GMT +7, for Singapore/Malaysia/ the phone is used for a certain time. Philippines GMT +8, for Australia (Sydney) GMT +10, and for New Font size — to set the font size for Zealand GMT +12. messaging, contacts, and web pages. Operator logo — to set your phone to ■ My shortcuts display or hide the operator logo. With personal shortcuts you get Cell info display > On — to display quick access to often used functions the cell identity, if available from the of the phone. network.

Left selection key To select the phone functions to To select a function from the list, activate with a voice commands, select Menu > Settings > My select Menu > Settings > My shortcuts > Left selection key. shortcuts > Voice commands and a folder. Scroll to a function. If the left selection key is Go to to indicates that the voice tag is activate a function, in the standby activated. To activate the voice tag, mode, select Go to > Options and select Add. To play the activated from the following options: voice command, select Play. To use Select options — to add a function to voice commands, see ”Enhanced the shortcut list or to remove one. voice dialing” p. 9. Organise — to rearrange the To manage the voice commands, functions on your personal shortcut scroll to a phone function, and select list. from the following options: Edit or Remove — to change or Right selection key deactivate the voice command of To select a function from the list, the selected function. select Menu > Settings > My Add all or Remove all — to activate or shortcuts > Right selection key. deactivate voice commands to all functions in the voice commands Navigation key list. To assign other phone functions from a predefined list to the ■ Connectivity navigation key (scroll key), select You can connect the phone to a Menu > Settings > My shortcuts > compatible device using a Bluetooth Navigation key. wireless technology, infrared, or a USB data cable connection. You can Voice commands also define the settings for EGPRS To call contacts and carry out phone dial-up connections. functions, say the voice commands. Voice commands are language- dependent. To set the language, see Recognition lang. in ”Phone” p. 38.

Bluetooth wireless connection can be subject to technology interference from obstructions such as walls or from other electronic This device is compliant with devices. Bluetooth Specification 2.0 + EDR supporting the following profiles: Set up a Bluetooth connection generic access, network access, Select Menu > Settings > generic object exchange, hands-free, Connectivity > Bluetooth and from headset, object push, file transfer, the following options: dial-up networking, SIM access, and Bluetooth > On or Off — to activate serial port. To ensure interoperability or deactivate the Bluetooth between other devices supporting function. indicates that Bluetooth technology, use Nokia Bluetooth is activated. approved enhancements for this model. Check with the Search audio enhanc. — to search for manufacturers of other devices to compatible Bluetooth audio devices. determine their compatibility with Select the device that you want to this device. connect to the phone. There may be restrictions on using Paired devices — to search for any Bluetooth technology in some Bluetooth device in range. Select locations. Check with your local New to list any Bluetooth device in authorities or service provider. range. Select a device and Pair. Enter an agreed Bluetooth passcode of the Features using Bluetooth technology device (up to 16 characters) to pair or allowing such features to run in (associate) the device to your phone. the background while using other You must only give this passcode features, increase the demand on when you connect to the device for battery power and reduce the the first time. Your phone connects battery life. to the device, and you can start data Bluetooth technology allows you to transfer. connect the phone to a compatible Bluetooth device within 10 meters Bluetooth wireless connection (32 feet). Since devices using Select Menu > Settings > Bluetooth technology communicate Connectivity > Bluetooth. To check using radio waves, your phone and which Bluetooth connection is the other devices do not need to be currently active, select Active in direct line-of-sight, although the devices. To view a list of Bluetooth

34 Copyright © 2007 Nokia. All rights reserved. Settings devices that are currently paired To activate or deactivate the IR port with the phone, select Paired of your phone, select Menu > devices. Settings > Connectivity > Infrared. Bluetooth settings If data transfer is not started within To define how your phone is shown 2 minutes after the activation of the to other Bluetooth devices, select IR port, the connection is cancelled Menu > Settings > Connectivity > and must be started again. Bluetooth > My phone's visibility or IR connection indicator My phone's name. When is shown continuously, If you are concerned about security, the IR connection is activated, and turn off the Bluetooth function, or your phone is ready to send or set My phone's visibility to Hidden. receive data through its IR port. Always accept only Bluetooth When blinks, your phone is communication from others with trying to connect to the other device, whom you agree. or a connection has been lost.

Infrared Packet data You can set up the phone to send General packet radio service (GPRS) and receive data through its infrared is a network service that allows (IR) port to or from a IRDA mobile phones to send and receive compatible phone or data device. data over an Internet protocol Do not point the IR beam at anyone's (IP)based network. eyes or allow it to interfere with To define how to use the service, other IR devices. Infrared devices are select Menu > Settings > Class 1 laser products. Connectivity > Packet data > Packet When sending or receiving data, data conn. and from the following ensure that the IR ports of the options: sending and receiving devices are When needed — to set the packet pointing at each other and that data connection to established when there are no obstructions between an application needs it. The the devices. connection will be closed when the application is terminated.

Always online — to set the phone to Data transfer automatically connect to a packet Synchronize your calendar, contacts data network when you switch the data, and notes with another phone on. compatible device (for example, a Modem settings mobile phone), a compatible PC, or a You can connect the phone using remote Internet server (network Bluetooth wireless technology or service). USB data cable connection to a Your phone allows data transfer with compatible PC and use the phone as a compatible PC or another a modem to enable GPRS compatible device when using the connectivity from the PC. phone without a SIM card. To define the settings for Transfer contact list connections from your PC, select To copy or synchronize data from Menu > Settings > Connectivity > your phone, the name of the device Packet data > Packet data settings > and the settings must be in the list Active access point, and activate the of transfer contacts. If you receive access point you want to use. Select data from another device (for Edit active access pt. > Packet data example, a compatible mobile acc. pt., enter a name to change the phone), the corresponding transfer access point settings, and select OK. contact is automatically added to Select Packet data acc. pt., enter the the list, using the contact data from access point name (APN) to establish the other device. Server sync and PC a connection to an network, and synchronisation are the original select OK. items in the list. You can also set the EGPRS dial-up To add a new transfer contact to the service settings (access point name) list (for example, a mobile phone), on your PC using the Nokia Modem select Menu > Settings > Options software. See ”Nokia PC Connectivity > Data transfer > Suite” p. 70. If you have set the Options > Add transfer contact > settings both on your PC and on your Phone synchronisation or Phone phone, the PC settings are used. copy, and enter the settings according to the transfer type.

To edit the copy and synchronize contact your service provider. You settings, select a contact from the may receive the settings as a transfer contact list and Options > configuration message. See Edit. ”Configuration settings service” To delete a transfer contact, select it p. xii and ”Configuration” p. 40. from the transfer contact list and To start the synchronization from Options > Delete. your phone, select Menu > Settings > Connectivity > Data Data transfer with a transfer > Server sync. Depending on compatible device the settings, select Initialising For synchronization use Bluetooth synchronisation or Initialising copy. wireless technology or a cable connection. The other device must Synchronizing for the first time or be activated for receiving data. after an interrupted synchronization may take up to 30 minutes to To start data transfer, select Menu > complete. Settings > Connectivity > Data transfer and the transfer contact from the list other than Server sync USB data cable or PC synchronisation. According to You can use the USB data cable to the settings, the selected data is transfer data between the phone copied or synchronized. and a compatible PC or a printer supporting PictBridge. You can also Synchronize from a compatible use the USB data cable with Nokia PC PC Suite. To synchronize data from calendar, To activate the phone for data notes, and contacts, install the Nokia transfer or image printing, connect PC Suite software of your phone on the data cable. Confirm USB data the PC. Use Bluetooth wireless cable connected. Select mode., and technology or a USB data cable for select from the following options: the synchronization, and start the synchronization from the PC. Nokia mode — to use the cable for PC Suite. Synchronize from a server Printing & media — to use the phone To use a remote Internet server, with a PictBridge compatible printer subscribe to a synchronization or with your compatible PC. service. For more information and the settings required for this service,

Data storage — to connect to a PC Speed dialling > On — to dial the that does not have Nokia software names and phone numbers assigned and use the phone as a data storage to the speed-dialing keys, 2 to 9, by device. pressing and holding the To change the USB mode, select corresponding number key. Menu > Settings > Connectivity > Call waiting > Activate — to have USB data cable > Nokia mode, the network notify you of an Printing & media, or Data storage. incoming call while you have a call in progress (network service). See ■ Call ”Call waiting” p. 10. Select Menu > Settings > Call and Summary after call > On — to briefly from the following options: display the approximate duration and cost (network service) of the call Call divert — to divert your incoming after each call. calls (network service). You may not be able to divert your calls if some Send my caller ID > Yes — to show call barring functions are active. See your phone number to the person Call barring service in ”Security” you are calling (network service). To p. 41. use the setting agreed upon with your service provider, select Set by Voice clarity > Active — to enhance network. speech intelligibility especially in noisy environments. Outgoing call line — to select the phone line 1 or 2 for making calls if Anykey answer > On — to answer an supported by your SIM card (network incoming call by briefly pressing any service). key, except the power key, the camera key, the left and right Slide call handling — to set the selection keys, or the end key. phone to answer calls when you open the phone and to end calls Automatic redial > On — to make a when you close the phone. maximum of 10 attempts to connect the call after an unsuccessful call ■ attempt. Phone Select Menu > Settings > Phone and from the following options:

Language settings — To set the Phone updates — to receive phone display language of your phone, software updates from your service select Phone language. Automatic provider (network service). This selects the language according to option may not be available, the information on the SIM card. To depending on your phone. See select the USIM card language, ”Phone software updates” p. 42. select SIM language. To set a Operator selection > Automatic — to language for voice commands, select set the phone to automatically Recognition lang.. select one of the cellular networks Security keyguard — to set the phone available in your area. With Manual to ask for the security code when you can select a network that has a you unlock the keyguard. Enter the roaming agreement with your security code, and select On. service provider. Automatic keyguard — to lock the Confirm SIM actions — See ”SIM keypad automatically after a preset services” p. 63. time delay when the phone is in the Help text activation — to select standby mode and no function of the whether the phone shows help texts. phone has been used. Select On, and Start-up tone > On — The phone set the time. plays a tone when it is switched on. Welcome note — to write the note that is shown when the phone is ■ switched on. Enhancements This menu or the following options Flight query > On— The phone asks are shown only if the phone is or has every time when it is switched on been connected to a compatible whether the flight profile shall be mobile enhancement. used. With flight profile all radio connections are switched off. The Select Menu > Settings > flight profile should be used in areas Enhancements. Select an sensitive to radio emissions. enhancement, and depending on the enhancement, from the following options:

Default profile — to select the profile Activ. def. in all apps. — to activate that you want to be automatically the default configuration settings activated when you connect to the for supported applications. selected enhancement. Preferred access pt. — to view the Automatic answer — to set the saved access points. Scroll to an phone to answer an incoming call access point, and select Options > automatically after 5 seconds. If Details to view the name of the Incoming call alert is set to Beep service provider, data bearer, and once or Off, automatic answer is off. packet data access point or GSM Lights — to set the lights dial-up number. permanently On. Select Automatic Connect to support — to download to set the lights on for 15 seconds the configuration settings from your after a key press. service provider. Text phone > Use text phone > Yes — Device manager sett. — to allow or to use the text phone settings prevent the phone from receiving instead of headset or loopset phone software updates. This option settings. may not be available, depending on your phone. See ”Phone software ■ Configuration updates” p. 42. You can configure your phone with Personal config. sett. — to add new settings that are required for certain personal accounts for various services to function correctly. Your services manually and to activate or service provider may also send you delete them. To add a new personal these settings. See ”Configuration account if you have not added any, settings service” p. xii. select Add; otherwise, select Options > Add new. Select the Select Menu > Settings > service type, and select and enter Configuration and from the each of the required parameters. The following options: parameters differ according to the Default config. sett. — to view the selected service type. To delete or service providers saved in the phone. activate a personal account, scroll to To set the configuration settings of it, and select Options > Delete or the service provider as default Activate. settings, select Options > Set as default.

■ Security recipient’s phone number and the message center number must be When security features that restrict included in the fixed dialing list. calls are in use (such as call barring, closed user group, and fixed dialling) Closed user group — to specify a calls still may be possible to the group of people whom you can call official emergency number and who can call you (network programmed into your device. service). Select Menu > Settings > Security Security level > Phone — to set the and from the following options: phone to ask for the security code whenever a new SIM card is inserted PIN code request and UPIN code into the phone. If you select request — to set the phone to ask for Memory, the phone asks for the your PIN or UPIN code every time the security code when the SIM card phone is switched on. Some SIM memory is selected, and you want to cards do not allow the code request change the memory in use. to be turned off. Access codes — to change the PIN2 code request — to select security code, PIN code, UPIN code, whether the PIN2 code is required PIN2 code, or barring password. when using a specific phone feature which is protected by the PIN2 code. Code in use — to select whether the Some SIM cards do not allow the PIN code or UPIN code should be code request to be turned off. active. Call barring service — to restrict Authority certificates or User incoming calls to and outgoing calls certificates — to view the list of the from your phone (network service). A authority or user certificates barring password is required. downloaded into your phone. See ”Certificates” p. 68. Fixed dialling — to restrict your outgoing calls to selected phone Security module sett. — to view numbers if this function is supported Secur. module details, activate by your SIM card. When the fixed Module PIN request, or change the dialing is on, GPRS connections are module PIN and signing PIN. See also not possible except while sending ”Access codes” p. xii. text messages over a GPRS connection. In this case, the

■ Phone software Request a software update updates Select Menu > Settings > Phone > Your service provider may send Phone updates to request available phone software updates over the air phone software updates from your directly to your device (network service provider. Select Current service). This option may not be softw. details to display the current available, depending on your phone. software version and check whether an update is needed. Select Downl. Warning: If you install a phone softw. to download and install software update, you a phone software update. Follow the cannot use the device, even instructions on the display. to make emergency calls, until the update is completed and the device is Install a software update restarted. Be sure to backup Select Install softw. update to start data before accepting a the installation, when the software update. installation was cancelled after the download. Settings The software update may take To allowed or disallow phone several minutes. If there are software updates, select Menu > problems with the installation, Settings > Configuration > Device contact your service provider. manager sett. > Serv. softw. updates and following options: ■ Restore factory Always allow — to perform all settings software downloads and updates To reset some of the menu settings automatically. to their original values, select Always reject — to reject all software Menu > Settings > Rest. factory updates. sett.. Enter the security code. The Confirm first — to perform software names and phone numbers saved in downloads and updates only after Contacts are not deleted. your confirmation (default setting).

This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. The operator can update this menu with a service message. For more information, see ”Service inbox” p. 67.

In this menu you can manage ■ Print images images, video clips, music files, Your device supports Nokia themes, graphics, tones, recordings, XPressPrint. To connect it to a and received files. These files are compatible printer use a data cable stored in the phone memory or an or send the image using Bluetooth to attached microSD memory card and a printer supporting Bluetooth may be arranged in folders. technology. See ”Connectivity” p. 33. Your phone supports an activation You can print images that are in the key system to protect acquired jpg format. The images taken with content. Always check the delivery the camera are automatically saved terms of any content and activation in the jpg format. key before acquiring them, as they may be subject to a fee. Select the image you want to print and Options > Print. Copyright protections may prevent some images, music (including ■ ringing tones), and other content Memory card from being copied, modified, Keep all memory cards out of the transferred or forwarded. reach of small children. To see the list of folders, select You can use the microSD memory Menu > Gallery. card to store your multimedia files To see the available options of a such as video clips, music tracks, and folder, select a folder and Options. sound files, images, and messaging data. To view the list of files in a folder, select a folder and Open. Some of the folders in Gallery with content that the phone uses (for To see the available options of a file, example, Themes) may be stored on select a file and Options. the memory card. To view the folders of the memory card when moving a file, scroll to the memory card, and press the scroll key right.

To insert and remove the microSD Lock the memory card memory card, see ”Insert a microSD To set a password to lock your card” p. 2 and ”Remove the microSD memory card to help prevent card” p. 2. unauthorized use, select Options > Set password. The password can be Format the memory card up to eight characters long. When a memory card is formatted, The password is stored in your phone all data on the card is permanently and you do not have to enter it again lost. Some memory cards are while you are using the memory card supplied preformatted and others on the same phone. If you want to require formatting. Consult your use the memory card on another retailer to find out if you must phone, you are asked for the format the memory card before you password. To delete the password, can use it. select Options > Delete password. To format a memory card, select Menu > Gallery or Applications, the Check memory consumption memory card folder , and To check the memory consumption Options > Format memory card > of different data groups and the Yes. available memory for installing new When formatting is complete, enter applications or software on your a name for the memory card. memory card, select Options > Details.

When taking and using images or to activate the self-timer, or Img. video clips, obey all laws and respect sequence on to take images in a fast local customs as well as privacy and sequence. With the highest image legitimate rights of others. size setting, three images are taken in a sequence, with other size ■ Camera and video settings, five images are taken. You can take images or record video Select Options > Settings > Image clips with the built-in camera. preview time and a preview time to display the taken images on the Take an image display. During the preview time, select Back to take another image or To access the still image function, Send to send the image as a press the camera key (1) in the multimedia message. standby mode; if the video function Your device supports an image is on, scroll left or right. capture resolution of 1024 x 1280 To take an image in landscape pixels. The image resolution in these format, hold the phone in a materials may appear different. horizontal position. To zoom in and out in the camera mode, use the Record a video clip volume keys (2). To access the video function, press and hold the camera key in the standby mode; or if the camera function is on, scroll left or right. To start the video recording, select Record. To pause the recording, select Pause; to resume the To take an image, select Capture, or recording, select Continue; to stop press the camera key. The phone the recording, select Stop. The saves images on the memory card. phone saves the video clips on the Select Options to set Night mode on memory card. if the lighting is dim, Self-timer on

Camera and video options 1. Select Menu > Media > Media To use a filter, select Options > player > Streaming settings > Effects > False colours, Greyscale, Configuration. Sepia, Negative, or Solarise. 2. Select a service provider, Default, To change the camera and video or Personal config. for streaming. settings, select Options > Settings. 3. Select Account and a streaming service account contained in the ■ Media player active configuration settings. With the media player you can view, ■ play, and download files, such as Music player images, audio, video, and animated Your phone includes a music player images. You can also view for listening to music tracks or other compatible streaming videos from a MP3 or AAC sound files that you network server (network service). have downloaded from the Web or Select Menu > Media > Media transferred to the phone with the player > Open gallery, Bookmarks, Nokia Music Manager application, Go to address, or Media downloads which is part of Nokia PC Suite. See to select or download media. ”Nokia PC Suite” p. 70. Copyright protections may prevent Select Menu > Media > Media some images, music (including ring- player > FF/Rew interval to set the ing tones), and other content from step width for fast forward or being copied, modified, transferred rewind. or forwarded. Configuration for a Music files stored in the music folder in the phone memory or on streaming service the memory card will automatically You may receive the configuration be detected and added to the music settings required for streaming as a library during the startup of the configuration message from the phone. service provider. See ”Configuration To open the music player, select settings service” p. xii. You can also Menu > Media > Music player. enter the settings manually. See ”Configuration” p. 40. To activate the settings, do the following:

Playing the music tracks Show tracks — View all available Warning! Listen to music at tracks of the active track list and a moderate level. play the desired track. To play a Continuous exposure to track, scroll to the desired track, and high volume may damage select Play. your hearing. Music library — View all available Operate the music player with the tracks ordered according to Artists, music player keys on the phone or Albums, Genres, Composers, or Track with the scroll keys when the music lists. Select Update library to refresh player menu is open. the lists. Track lists generated with To start playing, press . the Nokia Music Manager you will find under Track lists > My track To adjust the volume level, use the lists. volume keys on the side of the phone. Play options — Select Random to play the tracks on the track list in To pause the playing, press . random order. Select Repeat to play To rewind the current track, press the current track or the entire track and hold . To fast forward the list repeatedly. current track, press and hold . Media equaliser — to select or Release the key at the position you define an equalizer setting. want to continue the music playback. Add to Favourites — to add the current track to the favorite track To skip to the next track, press . list. To skip to the beginning of the previous track, press . Play via Bluetooth — to connect and play the tracks on an audio To close the music player menu and accessory using Bluetooth to continue music playback in the technology background, press the end key. Use tone — to set the currently To stop the music player, press and played music track, for example, as hold the end key. a ringing tone. The availability of this menu depends on your phone. Music player options Send — to send the current track by In the Music player menu select from a multimedia message or using the following options: Bluetooth technology.

Web page — to access a Web page radio frequency in 0.05 MHz associated with the currently played steps, briefly press or . track. 2. To save a frequency to a memory Music downloads — to connect to a location, 1 to 9, press and hold Web service. the corresponding number key. To Memory status — to view the free save a frequency to a memory and used memory capacity. location from 10 to 20, press briefly 1 or 2, and press and hold ■ Radio the desired number key, 0 to 9. The FM radio depends on an antenna 3. Enter the name of the radio other than the wireless device’s station. antenna. A compatible headset or enhancement needs to be attached Listen to the radio to the device for the FM radio to Select Menu > Media > Radio. To function properly. scroll to the desired frequency, select Warning: Listen to music at or , or press the headset key. To a moderate level. select a radio station, briefly press Continuous exposure to the corresponding number keys. To high volume may damage adjust the volume, press the volume your hearing. Do not hold keys. the device near your ear Select from the following options: when the loudspeaker is in Switch off — to turn off the radio. use, because the volume may be extremely loud. Save station — to save a new station (shown if a new station is detected). Select Menu > Media > Radio. Loudspeaker or Headset — to listen To use the graphical keys , , to the radio using the loudspeaker or , or on the display, scroll left headset. or right to the desired key, and select it. Mono output or Stereo output — to listen to the radio in monophonic sound or in stereo. Save radio frequencies Stations — to select the list of saved 1. To start the search, select and stations. To delete or rename a hold or . To change the station, scroll to the desired station, and select Options > Delete station,

Copyright © 2007 Nokia. All rights reserved. 49 Media or Rename. Select Visual service ID The recorder cannot be used when a to enter a service ID given by the data call or GPRS connection is visual radio service provider active. (network service). Search all stations — to search for Record sound new radio stations. 1. Select Menu > Media > Voice Set frequency — to enter the recorder. frequency of the desired radio To use the graphical keys , , station. or on the display, scroll left or Station directory — to access a Web right to the desired key, and site with a list of radio stations. select it. Enable visual service > 2. To start the recording, select . Automatically — to set whether To start the recording during a Visual Radio (network service) starts call, select Options > Record. automatically when you turn on the While recording a call, all parties radio. Some radio stations may send to the call hear a faint beeping. text or graphical information that When recording a call, hold the you can view using the Visual Radio phone in the normal position application. To check the availability near to your ear. To pause the and costs, contact your service recording, select . provider. 3. To end the recording, select . When an application using a packet The recording is saved in data or HSCSD connection is sending Gallery > Recordings. or receiving data, it may interfere To listen to the latest recording, with the radio. select Options > Play last recorded. ■ Voice recorder To send the last recording, select You can record pieces of speech, Options > Send last recorded. sound, or an active call, and save To see the list of recordings in them in Gallery. This is useful when Gallery, select Options > recording a name and phone number Recordings list > Recordings. to write down later.

■ Equalizer You can control the sound quality when using the music player by amplifying or diminishing frequency bands. Select Menu > Media > Equaliser. To activate a set, scroll to one of the equalizer sets, and select Activate. To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed.

■ Stereo widening Stereo widening enhances the audio output of stereo enhancements by enabling a wider stereo sound effect. To change the setting, select Menu > Media > Stereo widening.

If available, select Menu > Push to joined to the channel hear the call talk. simultaneously. Push to talk (PTT) over cellular is a There are different types of PTT two-way radio service available over channels: a GPRS cellular network (network Public channel — Every channel service). member can invite other persons. You can use PTT to have a Private channel — Only persons conversation with one person or which receive an invitation by the with a group of people (channel) channel creator can join in. having compatible devices. While Provisioned channel — A permanent you are connected to the PTT service, channel is created by the service you can use the other functions of provider. the phone. You can set the status of each To check availability and costs, and channel to Active or Inactive. to subscribe to the service, contact your network operator. Roaming The number of active channels and services may be more limited than the number of members per channel for normal calls. is limited. Contact your service provider for details. Before you can use the PTT service, you must define the required PTT service settings. See ”PTT settings” Create a channel p. 56 and ”Configuration settings” To add a channel, select Menu > p. 57. Push to talk > Add channel, and enter the settings in the form fields: ■ PTT channels Channel name: — Enter a name for A PTT channel comprises a group of the new channel. people (for example, friends or a Channel status: — Select Active to workteam) who joined the channel set the channel active or Inactive to after they where invited to. When disable the channel. you call a channel, all members

Nickname in channel: — Enter your 2. To view the nickname of the nick name to be shown the new person who sent the invitation channel. and the channel address if the Channel security: > Public channel channel is not a private channel, or Private channel. select View. Image: — Select Change and an 3. To add the channel to your image from the Gallery or the phone, select Save. Default graphic to set a graphic for 4. To set the status for the channel, the new channel. select Active or Inactive. To send an invitation to the channel, To reject the invitation, select Exit > select Yes when the phone requests Yes, or select View > Discard > Yes. it. The recipient of the invitation is added to the member list of the ■ Switch PTT on and off channel when the invitation is To connect to the PTT service, select accepted. To send further Menu > Push to talk > Switch PTT invitations, select Menu > Push to on, or press and hold the PTT (volume talk > Channel list, a channel, and up) key. indicates the PTT Options > Send invitation. To send connection. indicates that the the invitation use a text message or service is temporarily unavailable. If IR. you have added channels to the To add a provisioned channel, select phone, you are automatically joined Menu > Push to talk > Add to the active channels. channel > Options > Edit add. You may assign a default function to manually. Enter the Channel the PTT (volume up) key to open the address: provided by your service channel list, the contacts list or a provider. single channel or contact. See ”PTT settings” p. 56. Receive an invitation To disconnect from the PTT service, 1. When you receive a text message select Switch PTT off. invitation to a channel, Channel invitation received: is displayed.

■ Make and receive a PTT to the desired channel, and press and call hold the PTT (volume up) key. Warning: Do not hold the device near your ear when Make a one-to-one call the loudspeaker is in use, To start a one-to-one call from the because the volume may be list of contacts to which you have extremely loud. added the PTT address, select To make a channel call, a one-to-one Contacts > Names or Menu > Push call, or a call to multiple recipients, to talk > Contacts list. Scroll to a you must hold the PTT (volume up) contact, and press and hold the PTT key as long as you talk. To listen to (volume up) key. the response, release the PTT To start a one-to-one call from the (volume up) key. list of PTT channels, select Channel You may be able to check the login list, scroll to the desired channel, status of your contacts in Menu > and select Members. Scroll to the Push to talk > Contacts list. This desired contact, and press and hold service depends on your network the PTT (volume up) key. operator and is only available for To start a one-to-one call from the subscribed contacts. To subscribe a list of callback requests you have contact, select Options > Subscribe received, select Callback inbox. contact, or if one or more contacts Scroll to the desired nickname, and are already marked, Subscribe press and hold the PTT (volume up) marked. key. or indicate that the person is either available or unknown. Make a PTT call to multiple indicates that the person wants recipients not to be disturbed, but can receive You can select multiple PTT contacts callback requests. indicates that from the contact list. The recipients the person has PTT not switched on. receive an incoming call and need to accept the call in order to Make a channel call participate. If supported by your To make a call to a channel, select network operator, you also may Channel list in the PTT menu, scroll select contacts with a phone number but without PTT number. For details, contact your network operator.

1. Select Menu > Push to talk > ■ Callback requests Contacts list, and mark the If you make a one-to-one call and do desired contacts. not get a response, you can send a 2. Press and hold the PTT (volume request for the person to call you up) key to start the call. The back. participating contacts are shown on the display as soon as they Send a callback request join the call. You can send a callback request in 3. Press and hold the PTT (volume the following ways: up) key to talk to them. Release the PTT (volume up) key to hear To send a callback request from the the response. contacts list in the Push to talk menu, select Contacts list. Scroll to a 4. Press the end key to terminate contact, and select Options > Send the call. PTT callback. To send a callback request from Receive a PTT call Contacts, search for the desired A short tone notifies you of an contact, and select Details. Scroll to incoming PTT call. Information, such the PTT address, and select as the channel, the phone number, or Options > Send PTT callback. the nickname (network service) of To send a callback request from the the caller, is displayed. channel list in the PTT menu, select You can either accept or reject an Channel list, and scroll to the desired incoming one-to-one call if you channel. Select Members, scroll to have set the phone to first notify you the desired contact, and select of the one-to-one calls. Options > Send PTT callback. When you press and hold the PTT To send a callback request from the (volume up) key while the caller is callback request list in the Push to talking, you hear a queuing tone, talk menu, select Callback inbox. and Queuing is displayed. Press and Scroll to a contact, and select hold the PTT (volume up) key, and Options > Send PTT callback. wait for the other person to finish; then you can talk immediately.

Respond to a callback To add a contact to the PTT contacts request list, select Menu > Push to talk > Contacts list > Options > Add When someone sends you a callback contact. request, Callback request received is displayed in the standby mode. To add a contact from the channel list, connect to the PTT service, select To open the Callback inbox, select Channel list, and scroll to the desired View. The list of nicknames of the channel. Select Members, scroll to persons who have sent you callback the member whose contact requests is shown. information you want to save, and To make a one-to-one call, select the select Options. To add a new desired request, and press and hold contact, select Save as. To add a PTT the PTT (volume up) key. address to a name in Contacts, select To send a call request back to the Add to contact. sender, select Options > Send PTT callback. ■ PTT settings To delete the request, select Delete. Select Menu > Push to talk > PTT To save a new contact or add the PTT settings. address to a contact from a received 1 to 1 calls > On — to select the callback request, select Options > phone to allow the reception of Save as or Add to contact. incoming one-to-one calls. To make but not receive one-to-one calls, ■ Add a one-to-one select Off. The service provider may contact offer some services that override You can save the names of persons these settings. To set the phone to to whom you often make first notify you of incoming one-to-one calls in the following one-to-one calls with a ringing tone, ways: select Notify. To add a PTT address to a name in PTT key def. function — to set the PTT Contacts, search for the desired (volume up) key to following contact, select Details > Options > functions: Open contact list, Open Add detail > PTT address. A contact channel list, Call contact or group. will only appear in the PTT contact Select a contact, a group, or Call PTT list, if the PTT address is entered. channel; and select a channel. When you press and hold the PTT (volume

56 Copyright © 2007 Nokia. All rights reserved. Push to talk up) key, the selected function is To select the settings for connecting performed. to the service, select Menu > Push Show my login status — to enable or to talk > Configuration sett.. Select disable the sending of the login from the following options: status. Configuration — to select a service PTT status in startup > Yes or Ask provider, Default, or Personal config. first — to set the phone to for PTT service. Only the automatically connect to the PTT configurations that support the PTT service when you switch the phone service are shown. on. Account — to select a PTT service PTT when abroad — to switch the PTT account contained in the active service on or off when the phone is configuration settings. used outside of the home network. Other parameters are PTT user name, Send my PTT address > No — to hide Default nickname, PTT password, your PTT address from channel and Domain, and Server address. one-to-one calls. ■ Web ■ Configuration settings Select Menu > Push to talk > Web to You may receive the settings for access the Internet site of your PTT connecting to the service from your provider. service provider. See ”Configuration settings service” p. xii. You can enter the settings manually. See ”Configuration” p. 40.

■ Alarm clock sounding the alarm tone. If you select Stop, the device asks whether You can set the phone to alarm at a you want to activate the device for desired time. Select Menu > calls. Select No to switch off the Organiser > Alarm clock. device or Yes to make and receive To set the alarm, select Alarm time, calls. Do not select Yes when and enter the alarm time. To change wireless phone use may cause the alarm time when the alarm time interference or danger. is set, select On. To set the phone to alert you on ■ Calendar selected days of the week, select Select Menu > Organiser > Repeat alarm. Calendar. To select the alarm tone or set the The current day is indicated by a radio as the alarm tone, select Alarm frame. If there are any notes set for tone. If you select the radio as an the day, the day is in bold type, and alarm tone, connect the headset to the beginning of the note is shown the phone. below the calendar. To view the day To set a snooze time-out, select notes, select View. To view a week, Snooze time-out and the time. select Options > Week view. To delete all notes in the calendar, Stop the alarm select the month or week view, and The phone sounds an alert tone even select Options > Delete all notes. if the phone was switched off. To In Settings you can set the date, stop the alarm, select Stop. If you let time, time zone, date or time format, the phone continue to sound the date separator, default view, or the alarm for a minute or select Snooze, first day of the week. In Auto-delete the alarm stops for the time you set notes, you can set the phone to in Snooze time-out, then resumes. delete old notes automatically after If the alarm time is reached while a specified time. the device is switched off, the device switches itself on and starts

Make a calendar note and delete all the notes that you Select Menu > Organiser > have marked as done. Calendar. Scroll to the date, and select Options > Make a note and ■ Notes one of the following note types: To write and send notes, select Meeting, Call, Birthday, Menu > Organiser > Notes. Memo, or Reminder. Fill in To make a note if no note is added, the fields. select Add; otherwise, select Options > Make a note. Write the Note alarm note, and select Save. The phone displays the note and if set, sounds a tone. With a call note ■ Calculator on the display, to call the The calculator in your phone displayed number, press the call key. provides basic arithmetic and To stop the alarm and to view the trigonometric functions, calculates note, select View. To stop the alarm the square and the square root, the for 10 minutes, select Snooze. inverse of a number, and converts To stop the alarm without viewing currency values. the note, select Exit. Note: This calculator has ■ limited accuracy and is To-do list designed for simple To save a note for a task that you calculations. must do, select Menu > Organiser > Select Menu > Organiser > To-do list. Calculator. Press # for a decimal To make a note if no note is added, point. Scroll to the desired operation select Add; otherwise, select or function, or select it from the Options > Add. Fill in the fields, and Options. select Save. To save the exchange rate, select To view a note, scroll to it, and select Options > Exchange rate. To View. While viewing a note, you can perform the currency conversion, also select an option to edit the enter the amount to be converted, attributes. You can also select an and select Options > In domestic or option to delete the selected note In foreign.

■ Countdown timer Select Menu > Organiser > Stopwatch and from the following To start the countdown timer, select options: Menu > Organiser > Countd. timer > Normal timer, enter the Split timing — to take intermediate alarm time, and write a note text times. To start the time observation, that is displayed when the time select Start. Select Split every time expires. To start the countdown that you want to take an timer, select Start. To change the intermediate time. To stop the time countdown time, select Change observation, select Stop. time. To stop the timer, select Stop To save the measured time, select timer. Save. To have an interval timer with up to To start the time observation again, 10 intervals started, first enter the select Options > Start. The new time intervals. Select Menu > is added to the previous time. To Organiser > Countd. timer > Interval reset the time without saving it, timer. To start the timer, select Start select Reset. timer > Start. Lap timing — to take lap times. ■ Continue — to view the timing that Stopwatch you have set in the background. You can measure time, take Show last — to view the most intermediate times, or take lap times recently measured time if the using the stopwatch. During timing, stopwatch is not reset. the other functions of the phone can be used. To set the stopwatch timing View times or Delete times — to view in the background, press the end key. or delete the saved times. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.

In this menu you can manage ■ Application options applications and games. These files Update version — to check if a new are stored in the phone memory or version of the application is an attached microSD memory card available for download from Web and may be arranged in folders. (network service). For options to format or lock and Web page — to provide further unlock the memory card see information or additional data for ”Memory card” p. 44. the application from an Internet ■ page (network service), if available. Launch a game Application access — to restrict the Your phone software includes some application from accessing the games. network. Select Menu > Applications > Games. Scroll to the desired game, ■ Download an and select Open. application To set sounds, lights, and shakes for Your phone supports J2ME Java the game, select Menu > applications. Make sure that the Applications > Options > application is compatible with your Application settings. For more phone before downloading it. options, see ”Application options” Important: Only install and p. 61. use applications and other ■ software from sources that Launch an application offer adequate security and Your phone software includes some protection against harmful Java applications. software. Select Menu > Applications > You can download new Java Collection. Scroll to an application, applications and games in different and select Open. ways.

Use the Nokia Application Installer from PC Suite to download the applications to your phone, or select Menu > Applications > Options > Downloads > App. downloads; the list of available bookmarks is shown. See ”Bookmarks” p. 65. For the availability of different services, pricing, and tariffs, contact your service provider. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.

Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM actions > Yes. Accessing these services may involve sending messages or making a phone call for which you may be charged.

You can access various mobile configuration settings manually. See Internet services with your phone ”Configuration” p. 40. browser. Important: Use only ■ Connect to a service services that you trust and Ensure that the correct that offer adequate security configuration settings of the service and protection against are activated. harmful software. 1. To select the settings for Check the availability of these connecting to the service, select services, pricing, tariffs, and Menu > Web > Settings > instructions with your service Configuration sett.. provider. 2. Select Configuration. Only the With the phone browser you can configurations that support view the services that use wireless browsing service are shown. markup language (WML) or Select a service provider, Default, extensible hypertext markup or Personal config. for browsing. language (XHTML) on their pages. See ”Set up browsing” p. 64. Appearance may vary due to screen 3. Select Account and a browsing size. You may not be able to view all service account contained in the details of the Internet pages. active configuration settings. ■ Set up browsing 4. Select Displ. term. window > Yes to perform manual user You may receive the configuration authentication for intranet settings required for browsing as a connections. configuration message from the Make a connection to the service in service provider that offers the one of the following ways: service that you want to use. See ”Configuration settings service” •Select Menu > Web > Home. p. xii. You can also enter all the

• To select a bookmark of the ■ Bookmarks service, select Menu > Web > You can save page addresses as Bookmarks. bookmarks in the phone memory. • To select the last URL, select 1. While browsing, select Options > Menu > Web > Last web addr.. Bookmarks; or in the standby • To enter the address of the mode, select Menu > Web > service, select Menu > Web > Go Bookmarks. to address. Enter the address of 2. Scroll to a bookmark, and select the service, and select OK. it; or press the call key to make a connection to the page ■ Browse pages associated with the bookmark. After you make a connection to the 3. Select Options to view, edit, service, you can start browsing its delete, or send the bookmark; to pages. The function of the phone create a new bookmark; or to keys may vary in different services. save the bookmark to a folder. Follow the text guides on the phone Your device may have some display. For more information, bookmarks loaded for sites not contact your service provider. affiliated with Nokia. Nokia does not warrant or endorse these sites. If you Browse with phone keys choose to access them, you should To browse through the page, scroll in take the same precautions, for any direction. security or content, as you would To select an item, press the call key, with any Internet site. or select Select. To enter letters and numbers, press Receive a bookmark the 0 to 9 keys. To enter special When you have received a bookmark characters, press *. that is sent as a bookmark, 1 bookmark received is displayed. To Direct calling view the bookmark, select Show. While browsing, you can make a phone call, and save a name and a phone number from a page.

■ Appearance settings JavaScript > Enable — to enable the Java scripts. While browsing, select Options > Other options > Appearance settings; or in the standby mode, ■ Security settings select Menu > Web > Settings > Appearance settings and from the Cookies following options: A cookie is data that a site saves in Text wrapping — to select how the the cache memory of your phone. text shall appear on the display. Cookies are saved until you clear the Font size — to set the font size. cache memory. See ”Cache memory” p. 67. Show images > No — to hide images on the page. While browsing, select Options > Other options > Security > Cookie Alerts > Alert for unsec. conn. > Yes settings; or in the standby mode, — to set the phone to alert when a select Menu > Web > Settings > secure connection changes to an Security settings > Cookies. To allow unsecure one during browsing. or prevent the phone from receiving Alerts > Alert for unsec. items > Yes cookies, select Allow or Reject. — to set the phone to alert when a secure page contains an unsecure Scripts over secure item. These alerts do not guarantee a connection secure connection. For more information, see ”Browser security” You can select whether to allow the p. 68. running of scripts from a secure page. The phone supports WML Character encoding > Content scripts. encoding — to select the encoding for the browser page content. While browsing, to allow the scripts, select Options > Other options > Character encoding > Unicode Security > WMLScript settings; or in (UTF-8) addr. > On — to set the the standby mode, select Menu > phone to send a URL as a UTF-8 Web > Settings > Security settings > encoding. WMLScripts in conn. > Allow. Screen size > Full or Small— to set the screen layout.

■ Download settings Service inbox settings To automatically save all Select Menu > Web > Settings > downloaded files in Gallery, select Service inbox sett.. Menu > Web > Settings > To set whether you want to receive Downloading sett. > Automatic service messages, select Service saving > On. messages > On or Off. To set the phone to receive service ■ Service inbox messages only from content authors The phone is able to receive service approved by the service provider, messages sent by your service select Message filter > On. To view provider (network service). Service the list of the approved content messages are notifications (for authors, select Trusted channels. example, news headlines), and they To set the phone to automatically may contain a text message or an activate the browser from the address of a service. standby mode when the phone has To access the Service inbox in the received a service message, select standby mode, when you have Autom. connection > On. If you received a service message, select select Off, the phone activates the Show. If you select Exit, the browser only after you select message is moved to the Service Retrieve when the phone has inbox. To access the Service inbox received a service message. later, select Menu > Web > Service inbox. ■ Cache memory To access the Service inbox while A cache is a memory location that is browsing, select Options > Other used to store data temporarily. If you options > Service inbox. Scroll to the have tried to access or have accessed message you want, and to activate confidential information requiring the browser and download the passwords, empty the cache after marked content, select Retrieve. To each use. The information or services display detailed information on the you have accessed is stored in the service notification or delete the cache. message, select Options > Details or Delete.

To empty the cache while browsing, Certificates select Options > Other options > Important: Even if the use Clear the cache; in the standby of certificates makes the mode, select Menu > Web > Clear risks involved in remote the cache. connections and software installation considerably ■ Browser security smaller, they must be used Security features may be required correctly in order to benefit for some services, such as online from increased security. The banking or shopping. For such existence of a certificate connections you need security does not offer any certificates and possibly a security protection by itself; the module, which may be available on certificate manager must your SIM card. For more information, contain correct, authentic, contact your service provider. or trusted certificates for increased security to be Security module available. Certificates have a restricted lifetime. If The security module improves Expired certificate or security services for applications Certificate not valid yet is requiring a browser connection, and shown even if the certificate allows you to use a digital signature. should be valid, check that The security module may contain the current date and time in certificates as well as private and your device are correct. public keys. The certificates are Before changing any saved in the security module by the certificate settings, you service provider. must make sure that you To view or change the security really trust the owner of the module settings, select Menu > certificate and that the Settings > Security > Security certificate really belongs to module sett.. the listed owner.

There are three kinds of certificates: To make a digital signature, select a server certificates, authority link on a page (for example, the title certificates, and user certificates. of the book you want to buy and its You may receive these certificates price). The text to sign is shown, from your service provider. Authority which may include the amount and certificates and user certificates may date. also be saved in the security module Check that the header text is Read by the service provider. and that the digital signature icon To view the list of the authority or is shown. user certificates downloaded into If the digital signature icon does not your phone, select Menu > appear, there is a security breach, Settings > Security > Authority and you should not enter any certificates or User certificates. personal data such as your signing is displayed during a PIN. connection, if the data transmission To sign the text, read all of the text between the phone and the content first, and select Sign. server is encrypted. The text may not fit within a single The security icon does not indicate screen. Therefore, make sure to scroll that the data transmission between through and read all of the text the gateway and the content server before signing. (or place where the requested Select the user certificate you want resource is stored) is secure. The to use. Enter the signing PIN. The service provider secures the data digital signature icon disappears, transmission between the gateway and the service may display a and the content server. confirmation of your purchase. Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document.

You can send and receive e-mail, and service provider. See ”Modem access the Internet when your phone settings” p. 36. is connected to a compatible PC The use of HSCSD services consumes through a Bluetooth, infrared, or a the phone battery faster than data cable connection. You can use normal voice or data calls. your phone with a variety of PC connectivity and data ■ communications applications. Bluetooth Use the Bluetooth technology to ■ Nokia PC Suite connect your compatible Laptop to the Internet. Your phone must have With Nokia PC Suite you can activated a service provider that synchronize contacts, calendar, supports Internet access and your PC notes, and to-do notes between your has to support Bluetooth PAN phone and the compatible PC or a (Personal Area Network). After remote Internet server (network connecting to the network access service). Download the PC Suite from point (NAP) service of the phone and the CD delivered with your phone. pairing with your PC your phone You may find more information on automatically opens a packet data the Nokia Web site at connection to the Internet. PC Suite www.nokia-asia.com/5300/support software installation is not or your local Nokia Web site. necessary when using the NAP service of the phone. ■ Packet data, HSCSD, See ”Bluetooth wireless technology” and CSD p. 34. With your phone you can use the packet data, high-speed circuit ■ Data communication switched data (HSCSD), and circuit applications switched data (CSD, GSM data) data For information on using a data services. For availability and communication application, refer to subscription to data services, the documentation provided with it. contact your network operator or

Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation. For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.

■ Charging and If the battery is completely discharging discharged, it may take a few minutes before the charging Your device is powered by a indicator appears on the display or rechargeable battery. The full before any calls can be made. performance of a new battery is achieved only after two or three Use the battery only for its intended complete charge and discharge purpose. Never use any charger or cycles. The battery can be charged battery that is damaged. and discharged hundreds of times, Do not short-circuit the battery. but it will eventually wear out. When Accidental short-circuiting can the talk and standby times are occur when a metallic object such as noticeably shorter than normal, a coin, clip, or pen causes direct replace the battery. Use only Nokia connection of the positive (+) and approved batteries, and recharge negative (-) terminals of the battery. your battery only with Nokia (These look like metal strips on the approved chargers designated for battery.) This might happen, for this device. example, when you carry a spare If a replacement battery is being battery in your pocket or purse. used for the first time or if the Short-circuiting the terminals may battery has not been used for a damage the battery or the prolonged period, it may be connecting object. necessary to connect the charger Leaving the battery in hot or cold and then disconnect and reconnect places, such as in a closed car in it to start the charging. summer or winter conditions, will Unplug the charger from the reduce the capacity and lifetime of electrical plug and the device when the battery. Always try to keep the not in use. Do not leave fully charged battery between 15°C and 25°C battery connected to a charger, since (59°F and 77°F). A device with a hot overcharging may shorten its or cold battery may not work lifetime. If left unused, a fully temporarily, even when the battery charged battery will lose its charge is fully charged. Battery over time.

72 Copyright © 2007 Nokia. All rights reserved. Battery information performance is particularly limited Original Enhancements logo in temperatures well below freezing. when looking from another angle. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. 2. When you angle the hologram ■ Nokia battery left, right, down, and up, you authentication should see 1, 2, 3, and 4 dots on guidelines each side respectively. Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label using the following steps: What if your battery is not Successful completion of the steps is authentic? not a total assurance of the authenticity of the battery. If you If you cannot confirm that your have any reason to believe that your Nokia battery with the hologram on battery is not an authentic, original the label is an authentic Nokia Nokia battery, you should refrain battery, please do not use the from using it. If authenticity cannot battery. The use of a battery that is be verified, return the battery to the not approved by the manufacturer place of purchase. may be dangerous and may result in poor performance and damage to Authenticate hologram your device and its enhancements. It 1. When you look at the hologram may also invalidate any approval or on the label, you should see the warranty applying to the device. Nokia connecting hands symbol from one angle and the Nokia

To find out more about original Nokia batteries, visit www.nokia-asia.com/batterycheck.

A new extensive ■ Power range of enhancements is Type Tech Talk- Standby* Music available for your time* Time phone. Select the enhancements which accommodate your BL-5B Li-ion up to up to > 12 specific communication needs. 192 mins 223 hours hours Some of the enhancements are described * Variation in operation times may in detail below. occur depending on SIM card, network For availability of the enhancements, and usage settings, usage style and please check with your local dealer. A few environments. Use of FM radio and practical rules for enhancements integrated hands-free will affect operation: talktime and standby. • Keep the enhancements out of small children’s reach. ■ Audio • When you disconnect the power cord of any enhancement, grasp and pull Nokia Mini Speakers MD-4 the plug, not the cord. These compact stereo speakers improve • Check regularly that all mobile phone audio quality when you listen to music or equipment in a vehicle is mounted the radio on your compatible Nokia and operating properly. phone or audio device. The speakers have Use only batteries, chargers and a 3.5-mm stereo audio plug. With the enhancements approved by the phone supplied AD-50 adapter, the speakers can manufacturer. The use of any other be connected to a compatible device that types may invalidate any approval or has a 2.5-mm audio connector. warranty applying to the phone, and may be dangerous. Nokia Wireless Audio Gateway AD-42W Bring the convenience of wireless stereo audio connectivity to your home with the Nokia Wireless Audio Gateway AD-42W. Listen to the music stored in your mobile phone, computer or other compatible device wirelessly on your home stereo.

Then just flick a switch and listen to music from your compatible home stereo on your Bluetooth wireless headset.

■ Carkit

Nokia Multimedia Car Kit CK-20W Driving has never been this easy. The Nokia Multimedia Car Kit CK-20W integrates the comfort of handsfree usage with superior audio and multimedia options. Compatible with the Nokia Navigation Pack LD-2 for a high-quality navigation solution.

■ Data

Nokia 1 GB microSD Card MU-22 This microSD Card provides 1 GB of removable storage and increases the available memory for data, music and software applications.

Your device is a product of superior • Do not use harsh chemicals, cleaning design and craftsmanship and should be solvents, or strong detergents to treated with care. The suggestions below clean the device. will help you protect your warranty • Do not paint the device. Paint can coverage. clog the moving parts and prevent • Keep the device dry. Precipitation, proper operation. humidity and all types of liquids or • Do not touch the main display with moisture can contain minerals that hard or angular materials. Objects will corrode electronic circuits. If your like earrings or jewellery may scratch device does get wet, remove the the display. battery and allow the device to dry • Use a soft, clean, dry cloth to clean completely before replacing it. any lenses (such as camera, proximity • Do not use or store the device in sensor, and light sensor lenses). dusty, dirty areas. Its moving parts • Use only the supplied or an approved and electronic components can be replacement antenna. Unauthorized damaged. antennas, modifications, or • Do not store the device in hot areas. attachments could damage the High temperatures can shorten the device and may violate regulations life of electronic devices, damage governing radio devices. batteries, and warp or melt certain • Use chargers indoors. plastics. • Always create a backup of data you • Do not store the device in cold areas. want to keep (such as contacts and When the device returns to its normal calendar notes) before sending your temperature, moisture can form device to a service facility. inside the device and damage All of the above suggestions apply electronic circuit boards. equally to your device, battery, charger, • Do not attempt to open the device or any enhancement. If any device is not other than as instructed in this guide. working properly, take it to the nearest • Do not drop, knock, or shake the authorized service facility for service. device. Rough handling can break internal circuit boards and fine mechanics.

Your device and its enhancements may ■ Medical devices contain small parts. Keep them out of the Operation of any radio transmitting reach of small children. equipment, including wireless phones, may interfere with the functionality of ■ Operating environment inadequately protected medical devices. Remember to follow any special Consult a physician or the manufacturer regulations in force in any area, and of the medical device to determine if they always switch off your device when its are adequately shielded from external RF use is prohibited or when it may cause energy or if you have any questions. interference or danger. Use the device Switch off your device in health care only in its normal operating positions. facilities when any regulations posted in This device meets RF exposure guidelines these areas instruct you to do so. when used either in the normal use Hospitals or health care facilities may be position against the ear or when using equipment that could be sensitive positioned at least 2.2 centimeters (7/8 to external RF energy. inch) away from the body. When a carry case, belt clip or holder is used for Pacemakers body-worn operation, it should not Pacemaker manufacturers recommend contain metal and should position the that a minimum separation of device the above-stated distance from 15.3 centimeters (6 inches) be your body. maintained between a wireless phone To transmit data files or messages, this and a pacemaker to avoid potential device requires a quality connection to interference with the pacemaker. These the network. In some cases, transmission recommendations are consistent with of data files or messages may be delayed the independent research by and until such a connection is available. recommendations of Wireless Ensure that the above separation Technology Research. Persons with distance instructions are followed until pacemakers should do the following: the transmission is completed. • Always keep the device more than Parts of the device are magnetic. Metallic 15.3 centimeters (6 inches) from the materials may be attracted to the device. pacemaker Do not place credit cards or other • Not carry the device in a breast magnetic storage media near the device, pocket because information stored on them may • Hold the device to the ear opposite be erased. the pacemaker to minimize the potential for interference.

If you suspect interference, switch off Using your device while flying in aircraft your device, and move the device away. is prohibited. Switch off your device before boarding an aircraft. The use of ■ Vehicles wireless teledevices in an aircraft may be RF signals may affect improperly dangerous to the operation of the installed or inadequately shielded aircraft, disrupt the wireless telephone electronic systems in motor vehicles such network, and may be illegal. as electronic fuel injection systems, electronic antiskid (antilock) braking ■ Potentially explosive systems, electronic speed control environments systems, and air bag systems. For more Switch off your device when in any area information, check with the with a potentially explosive atmosphere manufacturer or its representative of and obey all signs and instructions. your vehicle or any equipment that has Potentially explosive atmospheres been added. include areas where you would normally Only qualified personnel should service be advised to turn off your vehicle the device, or install the device in a engine. Sparks in such areas could cause vehicle. Faulty installation or service may an explosion or fire resulting in bodily be dangerous and may invalidate any injury or even death. Switch off the warranty that may apply to the device. device at refueling points such as near Check regularly that all wireless device gas pumps at service stations. Observe equipment in your vehicle is mounted restrictions on the use of radio and operating properly. Do not store or equipment in fuel depots, storage, and carry flammable liquids, gases, or distribution areas; chemical plants; or explosive materials in the same where blasting operations are in compartment as the device, its parts, or progress. Areas with a potentially enhancements. For vehicles equipped explosive atmosphere are often but not with an air bag, remember that air bags always clearly marked. They include inflate with great force. Do not place below deck on boats, chemical transfer or objects, including installed or portable storage facilities, vehicles using liquefied wireless equipment in the area over the petroleum gas (such as propane or air bag or in the air bag deployment area. butane), and areas where the air contains If in-vehicle wireless equipment is chemicals or particles such as grain, dust, improperly installed and the air bag or metal powders. inflates, serious injury could result.

■ Emergency calls 3. Enter the official emergency number Important: Wireless phones, for your present location. Emergency including this device, operate numbers vary by location. using radio signals, wireless 4. Press the call key. networks, landline networks, If certain features are in use, you may and user-programmed first need to turn those features off functions. Because of this, before you can make an emergency call. connections in all conditions If the device is in the offline or flight cannot be guaranteed. You mode, you must change the profile to should never rely solely on any activate the phone function before you wireless device for essential can make an emergency call. Consult this communications like medical guide or your service provider for more emergencies. information. When making an emergency call, give all To make an emergency call: the necessary information as accurately 1. If the device is not on, switch it on. as possible. Your wireless device may be Check for adequate signal strength. the only means of communication at the Some networks may require that a scene of an accident. Do not end the call valid SIM card is properly inserted in until given permission to do so. the device. 2. Press the end key as many times as needed to clear the display and ready the device for calls.

■ Certification information while operating can be well below the (SAR) maximum value. This is because the THIS DEVICE MEETS INTERNATIONAL device is designed to operate at multiple GUIDELINES FOR EXPOSURE TO RADIO power levels so as to use only the power WAVES. required to reach the network. In general, Your mobile device is a radio transmitter the closer you are to a base station, the lower the power output of the device. and receiver. It is designed and manufactured not to exceed the limits The highest SAR value for this device for exposure to radio frequency (RF) when tested for use at the ear is recommended by international 0.80 W/kg. guidelines (ICNIRP). These limits are part SAR values may vary depending on of comprehensive guidelines and national reporting and testing establish permitted levels of RF energy requirements and the network band. Use for the general population. The guidelines of device accessories and enhancements were developed by independent scientific may result in different SAR values. organizations through periodic and Additional SAR information may be thorough evaluation of scientific studies. provided under product information at The guidelines include a substantial www.nokia-asia.com. safety margin designed to assure the * The SAR limit for mobile devices used by safety of all persons, regardless of age the public is 2.0 W/kg averaged over and health. 10 grams of body tissue. The guidelines The exposure standard for mobile devices incorporate a substantial margin of employs a unit of measurement known as safety to give additional protection for the Specific Absorption Rate, or SAR. The the public and to account for any SAR limit stated in the international variations in measurements. SAR values guidelines is 2.0 watts/kilogram (W/kg)*. may vary depending on national Tests for SAR are conducted using reporting requirements and the network standard operating positions with the band. For SAR information in other device transmitting at its highest regions, please look under product certified power level in all tested information at www.nokia.com. frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device

A C About your device x Cache memory 67 Access 20 Calculator 59 Access codes xii Calendar 58 Accessories. See enhancements. Call Active standby 6, 32 Functions 9 Add a one-to-one contact 56 Log 30 Add IM contacts 22 Options 10 Alarm clock 58 Settings 38 Answer or reject a call 10 Waiting 10 Antenna 4 Call key 5 Application options 61 Call register. See call log. Applications 61 Callback requests 55 Audio 75 Calls 9–10 Adaptor 4 Camera 46 Messages 17 Camera and video options 47 Camera key 5 B Carkit 76 Certificates 68 Barring password xii Certification information (SAR) 81 Battery Character Case 11 Charging 3 Charge the battery 3 Charging, discharging 72 Charger connector 5 Installation 1 Check memory consumption 45 Battery information 72 Clock settings 32 Blacklist 20 Codes xii Block or unblock messages 23 Configuration 40 Bluetooth 34, 70 Setting service xii Bookmarks 65 Settings 4 Browse pages 65 Connect 21 Browse with phone keys 65 Connect to a service 64 Browser Connector Appearance settings 66 Charger 5 Bookmarks 65 USB 5 Security 66 Contact information xiii Set up 64 Contacts 27 Browser security 68 Copy 27 Business cards 28 Delete 28 Edit 28 Groups 29

82 Copyright © 2007 Nokia. All rights reserved. My numbers 29 Flight mode 7 Save 27 FM radio 49 Search 27 Font size 32 Service numbers 29 Format the memory card 45 Settings 29 Functions without a SIM card 8 Speed dialing 29 Cookies 66 G Countdown timer 60 Gallery 44 Create a channel 52 Games 61 Create a message 17 General information xii Customer service xiii General packet radio service 35, 70 General settings 24 D Genuine Enhancements 75 Data 76 Get started 1 Cable 37 GPRS. See general packet radio service. Communication 70 Transfer 36 H Date settings 32 Handsfree. See loudspeaker. Digital signature 69 Headset 4 Direct calling 65 Display 6, 31 Download an application 61 I Download e-mail 19 Image 46 Downloads xiii, 67 IMAP4 18 Indicators 6 E Info messages 23 Infrared Earpiece 5 Connection 35 EGPRS 35 Lens 5 E-mail application 18 Insert a microSD card 2 E-mail folders 20 Install a software update 42 E-mail messages 26 Installation 1 Emergency calls 80 Instant messaging 20 End Internet 64 Call 9 IR. See infrared. Key 5 Enhancements xi, 39 Enhancements connector 5 J Equalizer 51 Junk folder 20 Explosive environments 79 K F Keyguard 8 Factory settings 42 Keypad 5, 8 Flash messages 16

Copyright © 2007 Nokia. All rights reserved. 83 Keys 5 MMS. See multimedia messages. Multimedia messages 14, 25 L Music player 47 Music player options 48 Language settings 39 Launch an application 61 Left selection key 33 N Listen to a message 17 Navigation Listen to the radio 49 Key 33 Location. See positioning. 30 Menus 12 Lock the memory card 45 Network Log 30 Name on display 6 Loudspeaker 5, 10 Services x Nokia 1 GB microSD Card MU-22 76 M Nokia battery authentication guidelines 73 Maintenance 77 Nokia contact information xiii Maintenance service xiii Nokia Mini Speakers MD-4 75 Make a channel call 54 Nokia Multimedia Car Kit CK-20W 76 Make a one-to-one call 54 Nokia support xiii Make a PTT call to multiple recipients 54 Nokia Wireless Audio Gateway Make and receive a PTT call 54 AD-42W 75 Media 46 Note alarm 59 Media player 47 Notes 59 Medical devices 78 Numbers 29 Memory Card 2, 44 Full 17 O Menu 12 Operating environment 78 Message Operator menu 43 Center number 13 Organizer 58 Folder 17 Settings 24–26 P Message sending 15 Pacemakers 78 Messages Packet data Audio message 17 See general packet radio service. Delete 24 Parts 5 Flash message 16 PC connectivity 70 Info messages 23 PC Suite 70 Length indicator 13 Phone Postcards 16 Configuration 40 Service commands 24 Open 3 Text 13 Settings 38 Voice message 23 Updates 39, 42 Messaging 13 Phone lock. See keypad lock.

84 Copyright © 2007 Nokia. All rights reserved. Phone software updates 42 Scrolling 12 PictBridge 37 Security PIN codes xii, 3 Codes xii Playing the music tracks 48 Module 68 Plug and play service 4 Settings 41 POP3 18 Selection keys 5 Positioning information 30 Send a callback request 55 Postcards 16 Service Power 75 Commands 24 Key 5 Inbox 67 Saver 32 Messages 67 Predictive text input 11 Numbers 29 Print images 44 Services 64 Profiles 31 Sessions 21 PTT channels 52 Set the time and date 3 PTT. See push to talk. Setting wizard 18 PUK codes xii Settings 31, 42 Push to talk 52–57 Active standby 32 Pushed messages 67 Call 38 Clock 32 R Configuration 40 Radio 49 Connectivity 33 Read and reply to a message 14, 15 Data transfer 36 Read and reply to e-mail 19 Date 32 Receive a bookmark 65 Display 31 Receive a message 17 Downloads 67 Receive a PTT call 55 Enhancements 39 Receive an invitation 53 Fold animation 32 Record sound 50 GPRS, EGPRS 35 Recorder 50 Infrared 35 Repair service xiii Messages 24 Request a software update 42 My shortcuts 32 Respond to a callback request 56 Phone 38 Right selection key 33 Profiles 31 Ringing tones 31 Push to talk 56, 57 Restore factory settings 42 Security 41 S Service inbox 67 Safety information ix, 78 Themes 31 Save details 27 Time 32 Save radio frequencies 49 Tones 31 Screen saver 32 USB data cable 37 Scripts over secure connection 66 Wallpaper 31 Scroll key 5 Shared memory xi

Copyright © 2007 Nokia. All rights reserved. 85 Shortcuts 32 U Signal strength 6 SIM Unlock keypad 8 Card 8 UPIN 3 Card installation 1 USB 5 Messages 24 Services 63 V SMS. See text messages Vehicles 79 Software updates 39, 42 Video clip 46 Spam filter 20 Visual radio 50 Speakerphone. See loudspeaker. Voice Speed dialing 9, 29 Commands 33 Standby mode 6, 32 Dialing 9 Status indicators 6 Messages 23 Stereo widening 51 Recorder 50 Stop the alarm 58 Volume Stopwatch 60 Adjusting 9, 48, 49 Strap 4 Key 5 Streaming service 47 Support xiii W Switch on and off 3 Wallpaper 31 Switch PTT on and off 53 Web 57, 64–67 Synchronization 36 Wireless markup language 64 Synchronize all 28 Wrist strap 4 Write a message 16 T Write and send a message 13 Take an image 46 Write and send a multimedia message 14 Text Write and send a multimedia plus Message 13 message 14 Phone 40 Write and send an e-mail 18 Writing 11 Write text 11 Text messages 24 Themes 31 X Time settings 32 XHTML 64 To-do list 59 Tones 31 Traditional text input 11 Y Your phone 5