DOCSLIB.ORG

“We Want Eight and We Won't Wait

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
“We Want Eight and We Won't Wait Over – smokebox under construction£2.0m all wheels,frames cast erected cab and From pledged the builders of “We want eight I would like to support Please join The Mikado Club and help us to No. 60163 Tornado the P2 Project and join Prince of Wales the first new main line steam wheel No. 2007 this year: and we won’t wait - locomotive built in Britain since 1960 The Mikado Club The Mikado Club – Following the success Club is to raise at least £600,000 from 300 of The Founders Club (to get the project supporters each donating £2,000 in up to 40 let’s make a Mikado!” Yes! to the point of cutting the frames) and The payments of £50 and by March 2016 we were Please complete the form below No stamp is required. We will then send you Boiler Club (to fund the construction of the already over one-third of the way there. and return to: the appropriate Standing Order and Donation boiler) we have decided to establish The If we are to remain on schedule to complete Help us to wheel new Gresley class Registration Forms so that we can set you up Mikado Club to fund the wheeling of No. The Mikado Club, P2 Construction Fund No. 2007 Prince of Wales in 2021 we need to Prince of Wales on our systems and reclaim UK income tax paid 2007 Prince of Wales . P2 2-8-2 No. 2007 this year The A1 Steam Locomotive Trust wheel the engine this year. We have therefore through Gift Aid where appropriate. We set an initial target for The Founders set ourselves the challenge of raising Business reply RTJS-XECR-XARL Why not visit us at Darlington and see Club of at least £100,000 from 100 ‘Founders’ £200,000 through The Mikado Club from 160 Darlington Locomotive Works No 2007 Prince of Wales under construction for but due to the overwhelming generosity of supporters each donating £1,000 (plus Gift Hopetown Lane yourself? We are open 11: 00hrs to 16:00hrs on our supporters we actually raised £450,000 Aid) to the project in up to eight payments of Darlington DL3 6RQ the third Saturday each month. from 360 donors. Our aim for The Boiler £125 by standing order. THE MIKADO CLUB APPLICATION FORM Special benefits for members of The Mikado Club Name ............................................................................................................................................................................... • Reserved seat on No. 2007’s first main line train Address .......................................................................................................................................................................... • Reasonable access to No. 2007 at ........................................................................................................... Post Code ........................................................ all times • Exclusive Mikado Club badge Email ................................................................................................ Telephone ............................................................ • Opportunity to join one of the teams I have enclosed a cheque for £1,000 made payable to “A1 SLT – P2 Construction Fund” or building No. 2007 I would like to make four (4) payments of £250 – please send me a Standing Order form or • First choice of other components to sponsor I would like to make eight (8) payments of £125 – please send me a Standing Order form • Special Mikado Club day with Tornado Are you a UK tax payer? Yes No • Special limited edition version (signed/numbered) of Stephen Bainbridge’s new painting Are you a member of The Founders Club for Yes No, please send details of No. 2007 Prince of Wales at Darlington station P2 No. 2007 Prince of Wales ? Are you a P2 No. 2007 Prince of Wales covenantor? Yes No, please send details Are you a member of The Boiler Club for Yes No, please send details For further information on any aspect of the new Gresley class P2 please visit P2 No. 2007 Prince of Wales ? www.p2steam.com, email us on enquiries@ p2steam.com or call ourhotline on Have you sponsored a component (Dedicated Donation) Yes No, please send details 01325 460163. for P2 No. 2007 Prince of Wales ? Yes Are you an A1 No. 60163 Tornado covenantor? No, please send details Together we can build this remarkable locomotive! Are you a member of The 163 Pacifics Club for Yes No, please send details A1 No. 60163 Tornado? To help our marketing efforts, could you please tell us where Join The Mikado Club today! you picked up this leaflet? ........................................................................................................................................................................................ ✂ Follow us on The Gresley Society Trust The Gresley Society How No. 2007 Prince of Wales will look on completion. CAD model showing sources of design: grey is original P2, Altered from an official portrait of Progress to-date yellow is minor redesign, green is Tornado design - No. 2001Cock O’ The North. other colours signify components requiring • Frame plates for engine and tender rolled and profiled; engine’s frames more extensive redesign. erected at Darlington Locomotive Works; all major engine frame stays, brackets, horn blocks, axle boxes and buffers cast (44 in total); over 1,000 fitted and driven bolts ordered and delivered • All 20 wheels for engine and tender cast and proof machined; roller bearings for all engine and tender wheelsets and engine axles and crank pins ordered • Preliminary discussions held with boiler manufacturers It was the eight driving wheels that made the construction and development project not and forged foundation ring corners manufactured and six original Gresley class P2 2-8-2 ‘Mikados’ an opportunity for major redesign. machined; start made on boiler fittings with castings for unique in Great Britain. They were the most • Make maximum use of systems, fittings and combined injector water and delivery valves powerful express passenger locomotives processes in use on No. 60163 Tornado - • Study into ride and suspension using rail industry standard to operate in the UK, designed by Sir Nigel any changes to the original design will be Vampire® software completed; Finite Element Analysis Gresley in the 1930s to haul 600 ton trains on either for operational, manufacturing or of improved crank axle design completed to demonstrate the arduous Edinburgh to Aberdeen route. certification reasons. compliance with modern standards; assessment and Notified Body Sadly the design was never fully developed and • Take into account the needs of the appointed to oversee certification - first site visit made they were rebuilt by his successor Edward operator – all decisions will be judged for • Cab trial erected and cab side window frames ordered; engine footplating and splasher kit Thompson into ungainly class A2/2 4-6-2 their value for money. delivered and being permanently fitted to frames “I’ve got a little list... they’d none ‘Pacifics’ in1943/4, and scrapped by 1961. • Meet current and foreseeable regulatory of them be missed.” • Smokebox door pressed, door frame manufactured, smokebox delivered and erected; standards to allow the locomotive to From an engineering perspective, the critical As the builders of No. 60163 Tornado, we have chimney pattern and casting completed set ourselves a new challenge: to develop, operate as intended. task for 2016 is to wheel the engine. The build and operate an improved Gresley class • We estimate that No. 2007 Prince of Wales • Nameplates delivered and chime whistle ordered work involved includes: P2 ‘Mikado’ steam locomotive for main line will cost around £5m to build over a • Over £2m already donated or pledged. • Machining axle and cannon box castings, and preserved railway use. The project to 7-10 year period. As with Tornado, funds manufacturing roller bearing details build the 7th Gresley class P2 ‘Mikado’ is using will be raised through regular donations • Boring eight coupled wheel bosses to the latest computer design and modelling ‘a P2 for the price of a pint of beer a finished size week’, donations dedicated to specific • Assembling bearings and cannon box onto techniques to enable it to deliver its true • Finish machining crank bosses & boring potential. components and commercial sponsorship. pony truck axle • Assembling bearings, cannon and axle crank pin holes and machining & fitting all We have the expertise, the track The new locomotive will: boxes onto plain coupled axles crank pins record and a plan… But this can’t • Be aesthetically similar to class P2 • Trial fitting coupled axles to frame • Trial fitting wheelsets to frames at DLW. happen without you. No. 2001 Cock O’ The North - it is a • Pressing Cartazzi wheels onto axle, fitting We have therefore established The Mikado CAD model showing where we & machining tyres and fitting bearings & Club to raise an estimated £200,000 required Why a ‘Mikado’? expect to be when this appeal is axleboxes to complete the wheeling of No. 2007 this successful. The Whyte notation for classifying steam was often referred to as “the Mikado” and • Pressing plain coupled wheels onto axles, year. This estimate excludes the components locomotives by wheel arrangement was the Gilbert and Sullivan opera The Mikado had fitting and machining tyres already ordered or delivered such as wheels, devised by Frederick Methvan Whyte in the achieved great popularity in both Britain and • Assembling crank axle, fitting bearings & tyres, axles, bearings and cannon boxes some early 20th century. In the notation a locomotive the USA. axleboxes, pressing wheels onto crank of which are still available
Load more

Recommended publications
  • PACIFIC’ Coupling Rods Fitted to Tornado at Darlington Locomotive Works
    60163 Tornado 60163 Tornado 60163 Tornado THE A1 STEAM LOCOMOTIVE TRUST Registered Office, All Enquiries: Darlington Locomotive Works, Hopetown Lane, Darlington DL3 6RQ Hotline Answerphone: 01325 4 60163 E-mail: [email protected] Internet address: www.a1steam.com PRESS INFORMATION – PRESS INFORMATION - PRESS INFORMATION PR04/04 Monday 4 October 2004 MAJOR STEP FORWARD AS NEW STEAM LOCOMOTIVE BECOMES A ‘PACIFIC’ Coupling rods fitted to Tornado at Darlington Locomotive Works The A1 Steam Locomotive Trust, the registered charity that is building the first new mainline steam locomotive in Britain for over 40 years, today announced that No. 60163 Tornado is now a Pacific following the fitting of all four coupling rods to its six 6ft8in driving wheels (the name Pacific refers to the 4-6-2 wheel arrangement under the Whyte Notation of steam locomotive wheel arrangements) which now rotate freely together for the first time. Each of the four 7ft 6in rods weighs around two hundredweight and after forging, extensive machining and heat treatment, the four cost around £22,000 to manufacture. These rods are vital components within the £150,000 valve gear and motion assemblies, which are now the focus of work on Tornado at the Trust’s Darlington Locomotive Works. The Trust has also started work on the fitting of the rest of the outside motion. The bushes for the connecting rods are currently being machined at Ian Howitt Ltd, Wakefield and one side of the locomotive has now been fitted with a mock-up of parts of its valve gear. This is to enable accurate measurements to be taken to set the length of the eccentric rod as the traditional method of heating the rod to stretch/shrink it used when the original Peppercorn A1s were built in 1948/9 is no longer recommended as it can affect the rod’s metallurgical properties.
    [Show full text]
  • The Unauthorised History of ASTER LOCOMOTIVES THAT CHANGED the LIVE STEAM SCENE
    The Unauthorised History of ASTER LOCOMOTIVES THAT CHANGED THE LIVE STEAM SCENE fredlub |SNCF231E | 8 februari 2021 1 Content 1 Content ................................................................................................................................ 2 2 Introduction ........................................................................................................................ 5 3 1975 - 1985 .......................................................................................................................... 6 Southern Railway Schools Class .................................................................................................................... 6 JNR 8550 .......................................................................................................................................................... 7 V&T RR Reno ................................................................................................................................................. 8 Old Faithful ...................................................................................................................................................... 9 Shay Class B ..................................................................................................................................................... 9 JNR C12 ......................................................................................................................................................... 10 PLM 231A .....................................................................................................................................................
    [Show full text]
  • The A1steam Locomotive Trust Tornado to Be
    60163 Tornado 60163 Tornado 60163 Tornado THE A1 STEAM LOCOMOTIVE TRUST Registered Office, All Enquiries: Darlington Locomotive Works, Hopetown Lane, Darlington DL3 6RQ Hotline Answerphone: 01325 4 60163 E-mail: [email protected] Internet address: www.a1steam.com PRESS INFORMATION – PRESS INFORMATION - PRESS INFORMATION PR05/04 Sunday 17 October 2004 TORNADO TO BE COMPLETED IN THREE YEARS Coal fired 60163 in steam by end of 2007 and on mainline in 2008 The A1 Steam Locomotive Trust, the registered charity that is building the first new mainline steam locomotive in Britain for over 40 years at a cost of over £2m, today announced that No. 60163 Tornado is to be completed by the end of 2007 and will be running on the mainline in 2008. The announcement follows a successful 11th Annual Convention attended by around 200 supporters at the Trust’s Darlington Locomotive Works on Saturday 9th October where No. 60163 Tornado is under construction. Having just fitted the coupling rods to No. 60163 Tornado, the Trust rotated the six 6ft8in driving wheels together on the incomplete locomotive for the first time in public at the Convention. The Trust also unveiled several significant new components for Tornado including other valve gear and motion components ready for fitting to the locomotive. The following key announcements were made at the Convention: 1. Following meetings with financial institutions the Trust’s strategy has been changed to reflect their requirement for supporting us 2. Having raised and spent over £1m on Tornado to-date, around £1m is now required to complete the locomotive 3.
    [Show full text]
  • The Steam Locomotive Table, V1
    The Steam Locomotive Table, v1 If you’re reading this; you either like steam trains, or want to know more about them. Hopefully, either way, I can scratch your itch with this; a set of randomizer/dice-roll tables of my own making; as inspired by some similar tables for tanks and aircrafts. Bear with me, I know not everyone knows the things I do, and I sure know I don’t know a lot of things other train enthusiasts do; but hopefully the descriptions and examples will be enough to get anyone through this smoothly. To begin, you’ll either want a bunch of dice or any online dice-rolling/number generating site (or just pick at your own whim); and somewhere or something to keep track of the details. These tables will give details of a presumed (roughly) standard steam locomotive. No sentinels or other engines with vertical boilers; no climax, shay, etc specially driven locomotives; are considered for this listing as they can change many of the fundamental details of an engine. Go in expecting to make the likes of mainline, branchline, dockyard, etc engines; not the likes of experiments like Bulleid’s Leader or specific industry engines like the aforementioned logging shays. Some dice rolls will have uneven distribution, such as “1-4, and 5-6”. Typically this means that the less likely detail is also one that is/was significantly less common in real life, or significantly more complex to depict. For clarity sake examples will be linked, but you’re always encouraged to look up more as you would like or feel necessary.
    [Show full text]
  • Union Pacific 844 4-8-4 FEF “Northern”
    True Sound Project for Zimo Sounds designed by Heinz Daeppen US Steam Page 1 Version 160328 Union Pacific 844 4-8-4 FEF “Northern” The Prototype The category FEF locomotives of the Union Pacific Railroad (UP), also known as class 800, are steam locomotives with the wheel arrangement 2'D2 '(Northern). In the total of 45 locomotives, there are three series of delivery or subclasses FEF 1 FEF 2 and FEF-3, where the FEF-2 and -3 differ in driving axels and cylinder diameter to the FEF-1. The last locomotive of this series, no. 844, was the last steam locomotive built for UP. It was never taken out of service and is kept operational by the UP today. In the late 1930s, the pulling loads on train operations were so large that the 2'D1 locomotives Class 7000 reached its limits. After the failure of such a locomotive, which happened to be pulling a train containing the official car of the US President, ALCO was commissioned to build a stronger engine, which could pull 20 coaches with 90 mph (145 km/h) on the flat. The first 20 locomotives were delivered 1937. They got the numbers 800-819 and the name FEF, which stood for "four-eight-four" (the wheel arrangement 4-8-4 in the Whyte notation). They had a driving wheels of 77 inches (1956 mm). The first driving axel was displaced laterally, so that despite a solid wheelbase of 6.7 m the locomotive could still handle the same radius curves . Despite the size of the locomotives only two cylinders were used, as was almost always common in the United States.
    [Show full text]
  • Factors That Affect Health & Safety Are So Prominent a Part of Modern Living
    Vol 22 No 143 THE EMAIL EDITION November 2005 THE BULLETIN For the WIRED members of the Model Railway Society of Ireland in its forty-second year Head of steam In the continental and US sectors, where RTR tends to be more dominant, investment risk is high but for different Happily the Doolan/ 6026 “debate” in the last issue did not reasons. Production numbers are greater than in the Britain result in satisfaction at dawn by means of pistols, swords or but locally, continental and US enthusiasts are in a minority. even brass pannier tanks so perhaps it is safe to consider Anyone wishing to up-grade might find disposal of his current locomotive model costs a little further. The proliferation of fleet an expensive exercise – a simple matter of supply and types, modifications, sub classes, design variants and demand. liveries now so evident in OO/HO sectors of the RTR There is no advantage in starting in a “war of the gauges” but market stands in stark contrast to the meagre offerings by there is merit in trying to see why other scales are attractive the Hornby Dublo/ Triang combination in days of yore. to other enthusiasts. In so doing, it might be instructive to Dissatisfaction with their limited model ranges spawned a discover where and why others see value instead of excess. taste for something different in a growing hobby. White metal, brass sheet and plastic based kits provided the Apart from the inherent advantages of 7mm mentioned by means of expanding and improving the fleet for those who 6026, those working in this scale tend to spend more of their wished to stay with British prototypes.
    [Show full text]
  • Gegenüberstellung Der Systeme VDEV/VMEV/UIC-System Whyte-Notation Amerikanischer Name Bildschema A1 2-2-0 Oo 1A 2-2-2 Planet Oo
    Gegenüberstellung der Systeme VDEV/VMEV/UIC-System Whyte-Notation Amerikanischer Name Bildschema A1 2-2-0 Oo 1A 2-2-2 Planet oO 1A1 4-2-0 Patentee oOo 2’A 6-2-0 Jervis,[3] Crampton, Norris ooO 3A 0-4-0 Crampton oooO B 0-4-2 Four-Wheel-Switcher OO B1 0-4-4 OOo B2 (B2’) 2-4-0 – OOoo 1’B (1B) 2-4-2 Hanscom oOO 1’B1’ 4-4-0 Columbia oOOo 2’B 4-4-2 American, Eight-Wheeler ooOO 2’B1’ 4-4-4 Atlantic ooOOo 2’B2’ 0-6-0 Jubilee ooOOoo Six-Wheel-Switcher, C 0-6-2 OOO Sixcoupler C1 2-6-0 OOOo 1’C 4-6-0 Mogul oOOO 2’C 2-6-2 Ten-Wheeler ooOOO 1’C1’ 4-6-2 Prairie oOOOo 2’C1’ 2-6-4 Pacific ooOOOo 1’C2’ 4-6-4 Adriatic oOOOoo 2’C2’ 0-8-0 Hudson, Baltic ooOOOoo D 2-8-0 Eight-Wheel-Switcher OOOO 1’D 2-8-2 Consolidation oOOOO 1’D1’ 2-8-4 Mikado, Mac Arthur oOOOOo 1’D2’ 4-8-0 Berkshire oOOOOoo 2’D 4-8-2 Twelve-Wheeler, Mastodon ooOOOO 2’D1’ 4-8-4 Mountain, Mohawk (NYC) ooOOOOo Northern, Niagara (NYC), 2’D2’ 0-10-0 ooOOOOoo Wyoming E 0-10-2 Ten-Wheel Switcher OOOOO E1’ 2-10-0 Union OOOOOo 1’E 4-10-0 Decapod oOOOOO 2’E 2-10-2 Mastodon ooOOOOO 1’E1’ 2-10-4 Santa Fé oOOOOOo 1’E2’ 4-10-2 Texas oOOOOOoo Texas, Southern Pacific, 2’E1’ 2-12-0 ooOOOOOo Overland 1’F 2-12-2 Centipede oOOOOOO 1’F1’ 4-12-2 Javanic oOOOOOOo ooOOOOOO 2’F1’ 0-6-6-0 Union Pacific o C’C 2-6-6-0 Erie (Gelenklok) OOO OOO (1’C)C 2-6-6-2 namenlos (Gelenklok) oOOO OOO Gelenk Mogul (SP), Prairie (1’C)C1’ 2-6-6-4 oOOO OOOo Articulated (ATSF) oOOO (1’C)C2’ 4-6-6-4 namenlos (Gelenklok) OOOoo ooOOO (2’C)C2’ 2-6-6-6 Challenger (Gelenklok) OOOoo oOOO (1’C)C3’ 0-8-8-0 Allegheny (Gelenklok) OOOooo OOOO D’D
    [Show full text]
  • LEGO Trains Reference - Texas Brick Railroad, 2021
    LEGO Trains Reference - Texas Brick Railroad, 2021 LEGO Trains Glossary Ballast - The gravel, rocks, sand and other material laid under railroad track, which provides stability and drainage to the track. For LEGO trains, this is usually done with layers of plates and tiles under the track pieces. Also “ballasting track” - building LEGO tracks with such pieces. LEGO train builders sometimes include railroad ties when talking about ballasting. [Figure 2] Benchwork - Tables, usually custom-built to specific dimensions, on which a layout is displayed. Buffer - Shock-absorbing devices mounted on the ends of railcars, usually one in each corner, which maintain spacing between coupled railway cars. These are common in European trains but rare in North American trains, which tend to use rigid couplers. Buffers are attached to a transverse structure across the end of the car called the buffer beam. (see Bricklink part 29085c01 and its variants) [Figure 3] Buffer Stop - A device used to keep a train from going past the end of the track. These may involve buffers similar to those found on train cars, or other shock-absorbing mechanisms to slow down a train. Also called bumpers, bumper posts, or stopblocks. [Figure 4] Engine House - A building used to store and service locomotives. Sometimes built in a circular/semicircular shape called a roundhouse, with a turntable in the center to position and turn around engines. [Figure 5] Hand of God / Big Hand From the Sky - When you have to use your hand to pick up or adjust your train, couple/decouple cars, or operate other functions like switches.
    [Show full text]
  • The First Garratt Locomotive in the Netherlands
    The first Garratt locomotive in the Netherlands By H. Brunner ME Translation ©2015 by René F. Vink, Netherlands In this article1 the reasons are mentioned that made the Limburg Tramway Co Ltd decide to purchase a "Garratt" locomotive. Furthermore a description is given of the acquired locomotive. General. In December 1931 a "Garratt" locomotive of 71.5 t [70.4 long ton] service weight was putinto service by the Limburg Tramway Co Ltd on her 26 km [16 mi] long line Maastricht-Vaals (fig. 1). Fig. 1. The Garratt locomotive In 1909 the Australian H.W. Garratt († 1913) obtained the patents on his engine type, with which the boiler was freely and completely accessible located on a frame that rested with pivots on a bogie each of which contained a separate locomotive engine. By locating the supply bunkers for water and coal on the bogie units, he diminished the tendency of the latter to rotate around their horizontal centers of gravitation at higher speeds as a consequence of the not fully counter balanced reciprocating masses of the components of the motion. Thus they contribute to the riding stability of the locomotive. He could increase the evaporative ability of the boiler almost at will because the dimensions of the boiler, the fire grate and the ash pan were no longer restricted by the tight dimensions and unfavourable restrictions of coupled wheels and water tanks. 1 This is a translation of the article that appeared in issue 35 of the Dutch magazine "De Ingenieur" (The Mechanical Engineer) in 1932. Some considerations apply to this translation - I followed the UK English spelling.
    [Show full text]
  • Front Matter Template
    Copyright by Joshua Stephen Rasmussen 2013 The Report Committee for Joshua Stephen Rasmussen Certifies that this is the approved version of the following report: Reliving The Railroad APPROVED BY SUPERVISING COMMITTEE: Supervisor: Dennis Darling Eli Reed Reliving The Railroad by Joshua Stephen Rasmussen, B.A. Report Presented to the Faculty of the Graduate School of The University of Texas at Austin in Partial Fulfillment of the Requirements for the Degree of Master of Arts The University of Texas at Austin May 2013 Dedication I dedicate this work to my patient and loving wife, Ashley, who worked hard day after day to make sure I had the time I needed to reach this milestone. She encouraged me constantly and pushed me when the workloads increased and deadlines approached. I thank her for so much, but especially for her determination and unrelenting vigor during the entirety of what truly has been an adventure. Acknowledgements I would like to acknowledge my family for its steadfast support through the years. Grandparents, Dan and Maxine Lynch, parents, Bob and Dannell, sister, Amy, and uncle and aunt, Bob and Colleen Knauber, all played important roles in seeing me to the finish line and across. v Abstract Reliving The Railroad Joshua Stephen Rasmussen, M.A. The University of Texas at Austin, 2013 Supervisor: Dennis Darling The Austin Steam Train Association operates a tourist train on a stretch of track in Texas from Cedar Park to Burnet. The diverse assortment of restored cars, some dating back to the 1920s, is pulled most-recently by a diesel engine, No.
    [Show full text]
  • UP Class 4000 “Bigboy”
    True Sound Project for Zimo Sounds designed by Heinz Daeppen US Steam Page 1 Version 150403 UP Class 4000 “BigBoy” Prototype information The class 4000 of the Union Pacific Railroad (UP), known as the Big Boy, was one of the largest and most powerful steam locomotives worldwide. A total of 25 units of this type were built by the American Locomotive Company (ALCO), 20 in the year 1941 and five in the year 1944. It was designed by a team led by Otto Jabelmann, who had already designed the Big Boy predecessor, the class 3900. (The Manufacturer's designation was Challenger with the wheel arrangement (2'C) C2 '). An unknown employee of the ALCO works came up with the name Big Boy, which he wrote with chalk on the smoke chamber. The name came into use quickly for the locomotives of the 4000 class. The locomotives were specified by the Union Pacific Railroad especially for the freight duty in the Rocky Mountains, to eliminate the need for labor-intensive double heading and helper operations over the continental divide. The most difficult section on the Union Pacific transcontinental line of was the long climb over Sherman Hill (Albany County, Wyoming) south of Ames Monument, with a maximum gradient of 1.55%. The new locomotives needed to pull 3.600 short tons (about 3.300 t) up this gradient, but also had to be fast enough to cover the whole distance between Cheyenne (Wyoming) and Ogden (Utah) without changing locomotives. The performance requirements showed the need for an articulated locomotive with the wheel arrangement (2'd) D2 ' (Whyte notation: 4-8-8-4 ).
    [Show full text]
  • Whyte Classification of Steam Locomotive Wheel Arrangements
    Lindsay & District Model Railroaders P.O. Box 452, Lindsay, ON, K9V 4S5 Email: [email protected] http://www.ldmr.org Steam Locomotive Wheel Arrangements Whyte-Notation American name picture scheme 2-2-0 Planet oO 2-2-2 Patentee oOo 4-2-0 Crampton, Norris ooO 6-2-0 Crampton oooO 0-4-0 Four-Wheel-Switcher OO 2-4-0 Hanscom oOO 2-4-2 Columbia oOOo 4-4-0 American, Eight-Wheeler ooOO 4-4-2 Atlantic ooOOo 4-4-4 Jubilee ooOOoo 0-6-0 Six-Wheel-Switcher OOO 2-6-0 Mogul oOOO 4-6-0 Ten-Wheeler ooOOO 2-6-2 Prairie oOOOo 4-6-2 Pacific ooOOOo 2-6-4 Adriatic oOOOoo 4-6-4 Hudson, Baltic ooOOOoo 0-8-0 Eight-Wheel-Switcher OOOO 2-8-0 Consolidation oOOOO 2-8-2 Mikado, Mac Arthur oOOOOo 2-8-4 Berkshire oOOOOoo 4-8-0 Twelve-Wheeler, Mastodon ooOOOO 4-8-2 Mountain, Mohawk (NYC) ooOOOOo 4-8-4 General Service (SP), Golden State (SP), Northern, Niagara (NYC), Wyoming ooOOOOoo 0-10-0 Ten-Wheel Switcher OOOOO 0-10-2 Union OOOOOo 2-10-0 Decapod oOOOOO 4-10-0 Mastodon ooOOOOO 2-10-2 Santa Fe oOOOOOo 2-10-4 Texas oOOOOOoo 4-10-2 Texas, Southern Pacific, Overland ooOOOOOo 2-12-0 Centipede oOOOOOO 2-12-2 Javanic oOOOOOOo 4-12-2 Union Pacific ooOOOOOOo 0-6-6-0 Erie (Mallet-Lok) OOO OOO 2-6-6-0 nameless (Mallet-Lok) oOOO OOO 2-6-6-2 Mallet Mogul (SP), Prairie Mallet (ATSF) oOOO OOOo 2-6-6-4 nameless (Mallet-Lok) oOOO OOOoo 4-6-6-4 Challenger (Mallet-Lok) ooOOO OOOoo 2-6-6-6 Allegheny (Mallet-Lok) oOOO OOOooo 0-8-8-0 Angus (Mallet-Lok) OOOO OOOO 2-8-8-0 Bullmoose (Mallet-Lok) oOOOO OOOO 2-8-8-2 Chesapeake, Mallet consolidation (Mallet-Lok) oOOOO OOOOo 2-8-8-4 Yellowstone (Mallet-Lok) oOOOO OOOOoo 4-8-8-2 Articulated consolidation (Mallet-Lok) ooOOOO OOOOo 4-8-8-4 Big Boy (Mallet-Lok) ooOOOO OOOOoo 2-10-10-2 Virginian (Mallet-Lok) oOOOOO OOOOOo 4-6-2 + 2-6-4 Double Pacific (Garratt-Lok) ooOOOo oOOOoo 4-8-2 + 2-8-4 Double Mountain (Garratt-Lok) ooOOOOo oOOOOoo Page 1 of 1 .
    [Show full text]