DOCSLIB.ORG

New Deep-Water Diving Support Vessel -Vessel Features and Specifications

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
New Deep-Water Diving Support Vessel -Vessel Features and Specifications Shanghai 30th of July 2018 New Deep-water Diving Support Vessel -Vessel Features and Specifications- Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 1 New Deep-water Diving Support Vessel (New Deep-water DSV) DP Class 3, Multipurpose Diving Support/Pipe-lay Vessel with SAT diving and rigid and flex pipe lay capability for worldwide operations Key features include: • DP2/DP3 Closed ring operation • Lay system capable for rigid, flexible pipes and umbilical • Deep-water heavy lift and installation work, with heave compensated 400t crane (Max 3000m water depth) • SAT diving, with 24 divers and two diving bell up to 500m water depth • Salvage operations Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 2 New Deep-water DSV – Vessel Specifications Principal Dimensions Vertical reel capacity 4000Te Mooring Length overall Approx. 177.10m Below deck carousel capacity 5000Te 5×anchor winches Length between PP 162.7m Cranage 7×mooring winches Breadth, moulded 33.0m 1×400Te AHC Knuckle boom crane ROV Depth, moulded (to 1st deck) 14.4m 400Te at 38m/800Te at 20m harbor lift 1×150HP WROV, 6000m water depth Depth, moulded (to 1st deck) 10.4m 590Te at 1500m w.d/190Te at 3000m w.d. 1×250HP WROV, 3000m water depth Design draught, moulded 7.5m 40Te whip line Moonpool size 4.9m*4.2m Max. load draught, moulded 8.8m 1×50Te Knuckle boom crane,100Te double fall Diving System 1 × 10Te at 20m Knuckle boom provision/reel Pipelay System Depth rating 500msw service basket lifting crane Max rigid pipe diameter 1×5Te at 8m Telescopic boom provision crane No. in saturation 24 18” OD (457.2mm) No. of bells 2 DP system 23.6” OD coated (600mm) Moonpool size 4.2m*4.2m DYNPOS AUTR – Class II / DYNPOS AUTRO – Max flexible pipe/Umbilical/Cable diameter Vessel Speed (Max transit) 15.0 Knots Class III 25.6” OD (650mm) Environmental Regulatory Number Endurance PIP diameter 99.99.99.99 10000 n mile/60 Days 12’’/25.4mm-18’’/35mm Capacities Flag Piggyback pipe diameter 2’’-6’’ Heavy fuel oil 2410 m3 People’s Republic of China Maximum lay dynamic tensions Marine gas oil 2490 m3 Rigid/Flexible/Umbilical 550Te Portable fresh water 1150 m3 Pipelay Technical water 300 m3 Operating depth <100m-3000m Ballast water Sufficient Ramp angle 40°-90° Water makers 2×50Te/Day Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 3 New Deepwater DSV – Overview 550Te RLS Tower Sikorsky S92A/S61N 400Te AHC Main Crane 100Te Auxiliary Crane 180p accommodation 2*WROV rated to 3,000m 500msw Diving System(Portable) 5000Te Capacity Under 4000Te Capacity Reel Deck Carousel Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 4 New Deepwater DSV – Class Notations ★CSA Salvage Ship, Rescue Ship, DSV-SAT, Floating Crane, Lifting Appliance, Pipe Laying, Ice Class B, SPS, PSPC(B), Helicopter Facilities, In-water survey. ★CSM, AUT-0, DP-2, DP-3, Electrical Propulsion System, FTP, BWMP, Clean, GWC, AFS, COMF(NOISE) 3, COMF(VIB) 3, BWMS, GPR +1A1, Pipe laying vessel, DSV(Surface, SAT), Crane vessel, Crane, pipe laying, Ice(C), SPS, COAT-PSPC(B), HELDK(S,H), BIS, E0, DYNPOS(AUTR), DYNPOS(AUTRO), BWM(E[s], T), ECA(SOX-A), NAUT(OSV-A), Clean(Design), COMF(V-3), Recyclable Double Class Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 5 New Deepwater DSV – Power System Main Power Generators 6*4,630kW Total 27,780kW Emergency/Harbor Generator 1*1,200kW Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 6 New Deepwater DSV – Propulsion System Main Azimuth Thrusters 3*5.5 MW Main Retractable Thrusters 2*3.1 MW Main Tunnel Thrusters 2*3.1 MW Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 7 New Deepwater DSV – Pipe-lay System A&R System Pipeline Straightener 615te A&R Capacity Aux. Crane 2*275Te 4-track Aligner tensioners Work station Initiation winch Spooling Tensioner A&R traction winch Reel spooling initiation winch A&R storage winch Hang-off Module 600Te Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 8 New Deepwater DSV – Pipe Storage System 5000T Flexible Product Storage & Routing Equipment 4000T Rigid Product Storage & Routing Equipment Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 9 New Deepwater DSV – Pipe-lay System IHC Scope-Turn Key 550t Rigid/Flexible Reel Full Turnkey solution for a 550t Lay Tower System Reel Lay System, including [IHC EB / IHC SAS] Product Storage & PLET Manipulation. Delivery, Installation & 4000t Rigid Product Commissioning on board a New Storage Reel System Build vessel, Chinese Port [IHC by NOV] [Qingdao]. Fully Integrated Control & Monitoring System Harbour & Sea Trials Support [IHC EB] including Operator Training & Operation / Maintenance Manuals 5000t Flexible Product Storage Carousel System [IHC by NOV] Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 10 New Deepwater DSV – Reeled Pipe Lay Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 11 New Deepwater DSV –Flexible and Umbilical Lay Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 12 New Deepwater DSV – Pipelay Attachment of ILT, PLET, PLEM PLET Rails PLET manipulator PLET handling system: Upend and position PLET and ILTs in the workstation PLET Size (Max) 100t (@ Hs=4m) Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 13 New Deepwater DSV – Rigid Pipelay with Piggyback Separate Aligner, Straightener & Centraliser System Piggy Back Tensioner Piggy Back Bellmouth Capable of Installation 2”-6” Rigid Pipe In Parallel with the Main Rigid Product Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 14 New Deepwater DSV – Reeling Capacity PIPE DIA Storage Capacity 8’’ NB 29.6km-56.5km 10” NB 21.3km-36.5km 12’’ NB 15.9km-25.9km 14’’ NB 13.6km-21.5km 16” NB 10.6km-16.4km 18’’ NB 8.5km-12.9km Note: Typical wall thickness and coating included Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 15 New Deepwater DSV – Main AHC Crane Subsea Lift SWL at 3000m deep water 190t@30m, single fall SWL at 1500m deep water 590t@18m, double fall Sea Lift/Internal Lift 400t@30m, single fall 800t@18m, double fall 180t@max 54m, single fall Port Lift 400t@38m, single fall 800t@20m, double fall Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 16 New Deepwater DSV – DP Capability *DPIII Worst Case Failure Hs=4.5m, Vw=31.7kts, Vc=2.0 kn Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 17 VH2 New Deepwater DSV – DP Pipe-lay 50T horizontal surge force acting from the aft of the vessel and backwards to simulate the added tension and drag from the pipe. Limit Weather Condition for Rigid Pipe Lay under Worst DP3 Failure： Hs=5.2m, Vw=37.1kts, Vc=2.0 kn Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 18 幻灯片 18 VH2 KM计算的DP结果相对WSD的要偏高，即使在加了50t铺管拉力后可抵抗的风浪流都高。这一点主要是前面几张PPT都是拿的WSD的计算结果， 两者有矛盾 Vincent Hsu, 2016/11/3 New Deepwater DSV – 2×Work Class ROV’s Side Lunch & Moon pool Lunch • Pre and post lay surveys • Touch down monitoring • Construction operations Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 19 New Deepwater DSV – Vessel Builder Wuchang Shipbuilding Industry Group Co.,Ltd Haixi Wan (Yard), Huangdao Qingdao, PRC Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 25 New Deepwater DSV – Key Milestone Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 26 New Deepwater DSV – Construction Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 27 Thank you for your attention! Q & A Shanghai Salvage New Deep-water Diving Support Vessel Construction Engineering Project Team 23.
Load more

Recommended publications
  • DNVGL-OS-E402 Diving Systems
    OFFSHORE STANDARDS DNVGL-OS-E402 Edition January 2017 Diving systems The content of this service document is the subject of intellectual property rights reserved by DNV GL AS ("DNV GL"). The user accepts that it is prohibited by anyone else but DNV GL and/or its licensees to offer and/or perform classification, certification and/or verification services, including the issuance of certificates and/or declarations of conformity, wholly or partly, on the basis of and/or pursuant to this document whether free of charge or chargeable, without DNV GL's prior written consent. DNV GL is not responsible for the consequences arising from any use of this document by others. The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. DNV GL AS FOREWORD DNV GL offshore standards contain technical requirements, principles and acceptance criteria related to classification of offshore units. © DNV GL AS January 2017 Any comments may be sent by e-mail to [email protected] This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this document. The use of this document by others than DNV GL is at the user's sole risk. DNV GL does not accept any liability or responsibility for loss or damages resulting from any use of this document. CHANGES – CURRENT This document supersedes DNV-OS-E402 Offshore standard for Diving systems, October 2010 and DNV-DS- E403 Standard for Surface Diving Systems, July 2012 Changes in this document are highlighted in red colour.
    [Show full text]
  • Wessex Archaeology
    Wessex Archaeology HMS/m A1, Bracklesham Bay Designated Site Assessment Archaeological Report Ref: 53111.03jj April 2006 ARCHAEOLOGICAL SERVICES IN RELATION TO THE PROTECTION OF WRECKS ACT (1973) HMS/M A1, BRACKLESHAM BAY, WEST SUSSEX DESIGNATED SITE ASSESSMENT: ARCHAEOLOGICAL REPORT Prepared by: Wessex Archaeology Portway House Old Sarum Park Salisbury WILTSHIRE SP4 6EB Prepared for: English Heritage Fort Cumberland Fort Cumberland Road Eastney Portsmouth PO4 9LD April 2006 Ref: 53111.03jj Wessex Archaeology Limited 2006 Wessex Archaeology Limited is a Registered Charity No.287786 HMS/m A1 Archaeological Report Ref: 53111.03jj HMS/M A1, BRACKLESHAM BAY, WEST SUSSEX DESIGNATED SITE ASSESSMENT: ARCHAEOLOGICAL REPORT Ref: 53111.03jj Summary Wessex Archaeology was commissioned by English Heritage to undertake a Designated Site Assessment of the HMS/m A1 site: a designated wreck located in Bracklesham Bay, West Sussex. The work was undertaken as part of the contract for Archaeological Services in Relation to the Protection of Wrecks Act (1973) (Figure 1). Wessex Archaeology diving operations took place in September and October 2005. A total of 11 dives were conducted, achieving a total dive time of 680 minutes (Appendix I). Diving investigations concentrated on an assessment of the wreck itself, supported by a photographic and video survey. A measured plan of the remains was produced. Two anomalies close to the site were also investigated, with one proving to be a corroded metal buoy and the other being a metal object of unknown function but not considered to be a part of the vessel. The hull structure was observed to be in and relatively good condition, despite areas of corrosion pitting along the outer casing on the top of the wreck.
    [Show full text]
  • Offshore-Brochure-Compact.Pdf
    About Us Cybermarine is an ISO certified leading Offshore Design & Engineering Enterprise with global operations. Cybermarine is headquartered in Singapore and delivers projects worldwide through offices at Houston, Mumbai and Kolkata. Cybermarine as a company built from scratch, has developed innovative technology and processes over the years and is in a position to deliver wide ranging design and engineering solutions to the upstream oil & gas industry. Cybermarine, by utilizing its proficiency in engineering & extensive design experience has successfully delivered a range of design and engineering solutions on Jack- up Rigs, Semi-submersibles and FPSOs Design & Engineering projects are executed using innovative and well-developed technology, which include Work Break-Down, Design-Spirals and 3D Space Arrangements/Models. The execution is augmented by well laid-down processes consisting of work specification spreadsheets and process checklists. Our technical teams are organized as project teams and operations' teams. Project teams comprise of project managers and project engineers responsible for project management and client interaction. Project teams are stationed in all our offices in various geographical locations. Operations' teams comprising of Naval Architects/Engineers/Designers are responsible for project Deliveries and class approvals. They are stationed in Mumbai, India and Singapore. We also have a Marine Division catering to the Design and Engineering of Multi-purpose support vessels, Cargo Vessels and other special vessels used in dredging and marine construction. 02 Service Segments Our services extend to the entire range of Floating assets used in the Offshore Industry and covers following types of vessels: New Designs Offshore Support Vessels DSV MPV Accommodation Barges Well Stimulation Vessels Conversions Simple Vessels to high end complex Offshore Vessels Type Conversions, i.e.
    [Show full text]
  • Lessons Learned
    LESSONS LEARNED Marine Operations Minas Passage Lessons Learned – Marine Operations in The Minas Passage Contents How to Use This Report Introduction Acronyms and Abbreviations Types of Vessels Dive Operations Equipment Challenges Environmental limitations Fundy Advanced System Technology (FAST) Vendors Appendix 1: Vessel Information Appendix 2: FAST Reports Appendix 3: Diving Appendix 4: Station Keeping / Mooring Trials Appendix 5: Video How to Use This Report The report describes the marine service resources available for sea-going operations in the Bay of Fundy, including their operational advantages and limitations. It also describes the operational constraints of this complex, high energy marine environment and provides information to help address commonly encountered situations. The report provides contact information of the many vendors and service providers available to support marine operations in the Bay of Fundy. For additional information or more detail on the work described herein, please contact Jason Clarkson at Operational Excellence Consulting Inc or Andrew Lowery at the Fundy Ocean Centre for Research (FORCE) at. 2 Lessons Learned – Marine Operations in The Minas Passage Introduction Fundy Ocean Research for Energy (FORCE), Offshore Energy Research Association (OERA) and Operational Excellence Consulting Inc. have teamed up to capture lessons learned from marine operations in the Minas Passage. The project involves information that is shared from developers and contractors who have been performing marine operations in the past number of years. The purpose is to help the tidal industry in Nova Scotia by sharing information about operations and experiences while operating in the conditions that are unique to the Minas Passage. The report includes a detailed overview of the resources used while performing marine activities in the Minas Passage such as: 1.
    [Show full text]
  • REPORT OFOPERATIONSILENTANZAC Peter Briggs Terence Roach Tim Smith Name
    Report REPORT OF OPERATION SILENT ANZAC MARITIME ARCHAEOLOGICAL ASSESSMENT OF HMAS AE2 Name Position Prepared Tim Smith Maritime Archaeologist By: Approved Terence Roach Director of Operations By: Authorised Peter Briggs Chairman AE2CF By: 1 KEY OUTCOMES 3 EXECUTIVE SUMMARY 4 REPORT OF OPERATION SILENT ANZAC 14 ANNEX A - PROJECT BACKGROUND, PREVIOUS WORK 54 ANNEX B - PROJECT DEVELOPMENT, SIA ACTIVITY 58 ANNEX C - TEAM MEMBERS 62 ANNEX D - SPONSORS 64 ANNEX E - CONSERVATION ASSESSMENT 66 Appendix 1 to ANNEX E - Physical Oceanography 10SEP07 91 Appendix 2 to ANNEX E - Site stabilisation post MAA 94 ANNEX F – ROV, DROP CAMERA & SEABED PENETROMETER 98 Appendix 1 to ANNEX F - Drop Camera Inspection 136 ANNEX G – STRUCTURAL ANALYSIS 146 Appendix 1 to ANNEX G - Sample Sites 152 ANNEX H - UPDATE TO THE RISK – UNEXPLODED TORPEDO 154 Appendix 1 to ANNEX H - Risk Tree 161 Appendix 2 to ANNEX H - Water Penetration into the Torpedo 162 2 KEY OUTCOMES • The objectives of the MAA were achieved. • The submarine is lying in a low corrosion environment. • The pressure hull is in a good state of preservation though a more detailed survey would be required to both confirm this impression and support full scale recovery. • Before either moving or raising additional data would be required. • The remaining torpedo must be located and the risk from its warhead removed before any effort to move the submarine is made. • The casing and fin have suffered significant deterioration arising from corrosion and impact by nets and anchors. • Development of options for future management is now proceeding. • The joint workshop in Istanbul in April 2008 is intended to provide a recommended way ahead.
    [Show full text]
  • Slovenska Pomorska Terminologija
    SLOVENSKA POMORSKA TERMINOLOGIJA DIPLOMSKA NALOGA Mentor: Dr. Dušan Fabe Študent: Rok Sorta Lektor: Jože Sorta, prof. Vpisna številka:09990875 Študijski program: Visokošolski strokovni študijski program pomorstva Smer študija: Navtika PORTOROŽ, APRIL 2003 POVZETEK Slovenci že od naselitve živijo tudi ob morju in so pomorski narod. Skozi zgodovino se je slovenski pomorski strokovni jezik spreminjal, dopolnjeval in izginjal, vendar so Slovenci, vezani na morje, pomorsko besedišče ves čas ohranjevali in razvijali. Čeprav se danes zasledi veliko besed pomorske terminologije v različnih slovarjih, knjigah, publikacijah, revijah in člankih, pa je edino delo, ki v celoti zajema to besedje knjižica Pomorska slovenščina iz daljnega 1961. leta. Slovenci nimajo ne angleško-slovenskega pomorskega slovarja, ne slovensko - angleškega pomorskega slovarja, niti pomorskega strokovnega slovarja. Zaradi svojega dela že dalj časa zbiram in iščem slovenske pomorske strokovne izraze. V diplomski nalogi sem zbrano gradivo uredil, povezal in ga dopolnil z besedami iz različnih virov. Pomorstvo je zelo širok pojem, saj zajema vse, kar je v zvezi z morjem. Čeprav je težko potegniti mejo, pa moje delo temelji na terminologiji pomorstva v ožjem smislu, ki predstavlja poznavanje, vodenje in upravljanje plovil po morju. Terminološko gradivo sem črpal v knjigi Pomorska slovenščina, dvojezičnih in enojezičnih slovarjih, pomorskih slovarjih, strokovnih učbenikih, diplomskih delih, strokovnih in leposlovnih knjigah, pomorski zakonodaji, strokovnih revijah in člankih, lastnih zapiskih ter pogovorih. Za lažje razumevanje in uporabo sem slovenskemu pomorskemu izrazoslovju dodal tudi angleški prevod. Čeprav sem vložil v to delo veliko truda in časa, pa vem da delo ni popopolno, da ima napake in da ga je potrebno (zaradi tehnološkega razvoja) dopolnjevati. Kot cilj sem si postavil uporabnost in koristnost mojega dela, zato si bom za uspeh štel, da ta diploma pripomore k poenotenju določenega strokovnega izrazja, ki ga uporabljajo različni viri ter poveča uporabo tega izrazja v praksi.
    [Show full text]
  • W Essex a Rchaeology
    Duart Point, Sound of Mull Designated Site Assessment Full Report y g o l o e a h c r A x e s s e Ref: 53111.03l W March 2004 ARCHAEOLOGICAL SERVICES IN RELATION TO THE PROTECTION OF WRECKS ACT (1973) DUART POINT, SOUND OF MULL DESIGNATED SITE ASSESSMENT: FULL REPORT Prepared by: Wessex Archaeology Portway House Old Sarum Park Salisbury Wiltshire SP4 6EB Prepared for: Historic Scotland Longmore House Salisbury Place Edinburgh EH9 1SH March 2004 Ref: 53111.03l ©The Trust for Wessex Archaeology Limited 2004 The Trust for Wessex Archaeology Limited is a Registered Charity No.28778 Duart Point Full Report Wessex Archaeology 53111.03l ARCHAEOLOGICAL SERVICES IN RELATION TO THE PROTECTION OF WRECKS ACT (1973) DUART POINT, SOUND OF MULL DESIGNATED SITE ASSESSMENT: FULL REPORT Ref: 53111.03l Summary Wessex Archaeology was commissioned by Historic Scotland to undertake a Designated Site Assessment of Duart Point: a designated wreck located off Duart Point in the Sound of Mull. The work was undertaken as part of the contract for archaeological services in relation to the Protection of Wrecks Act (1973) and was conducted following instruction from the Contracts Manager, Ian Oxley of English Heritage, and consultation with Gordon Barclay of Historic Scotland. A programme of monitoring works was devised following discussion between Wessex Archaeology and the site licensee Dr Colin Martin. The site is almost certainly the wreck of the Swan, a small Commonwealth warship driven onto Duart Point and lost during a storm during 13th and 14th September 1653 whilst on campaign to quell Jacobite unrest in western Scotland.
    [Show full text]
  • 28 Feb 2011 UT3 Issue 1 2012 Copy.Indd
    UT3 February March 2012 The magazine of the Society for Underwater Technology Oceanology Remote Vehicles Survey 1 UT2 February March 2012 UT2 February March 2012 2 Contents Exhibitions Market Reports Projects Orders Sensorbots Diving Installation IRM Mulberry Harbours Pipe [ Cables ROVs Submersibles Compression Feb/Mar 2012 Equipment Vol 7 No 1 AUVs Renewables Organisation UT3 Oceanology 2012 Society for Underwater Technology Training 1 Fetter Lane Seismic London EC4A 1BR People +44 (0) 1480 370007 SUT Editor: John Howes [email protected] Sub Editor: Michaelagh Broadbent [email protected] Advertising: Stephen Habermel Published by UT2 Publishing Ltd for and on behalf of the Society for Underwater Technology. Reproduction of UT2 in whole or in part, without permission, is Production: Sue Denham prohibited. The publisher and the SUT assumes no responsibility for unsolicited material, nor responsibility for content of any advertisement, particularly Design and Layout infringement of copyrights, trademarks, intellectual property rights and patents, Torpedo Design nor liability for misrepresentations, false or misleading statements and illustrations. These are the sole responsibility of the advertiser. Opinions of the writers are not necessarily those of the SUT or the publishers. ISSN: 1752-0592 3 UT2 February March 2012 Exhibitions Exhibitions Catch The Next Wave Focuses On A Marine Revolution Revolution will be in the air when Catch the Next Graham Hawkes of Deep Ocean Engineering. Wave, a one day conference organised by New Scientist
    [Show full text]
  • Model Ship Book 9Th Issue
    in 1/1200 & 1/1250 scale Issue 11 (April 2017) How it all began CONTENTS FOREWORD 1 CHAPTER 1 INTRODUCTION 3 Aim and Acknowledgements 3 The UK Scene 3 Overseas 5 Collecting 5 Sources of Information 5 Warship Camouflage 6 Lists of Manufacturers 6 CHAPTER 2 UNITED KINGDOM MANUFACTURERS 9 ATLAS EDITIONS 9 BASSETT-LOWKE 9 BROADWATER 10 CAP AERO 10 CLYDESIDE 10 COASTLINES 11 CONNOLLY 11 CRUISE LINE MODELS 12 DC MARINE MODELS 12 DEEP ‘C’/ATHELSTAN 12 ENSIGN 12 FERRY SMALL SHIPS 13 FIGUREHEAD 13 FLEETLINE 13 GORKY 14 GRAND FLEET MINIATURES 14 GWYLAN 14 HORNBY MINIC (ROVEX) 15 KS MODELSHIPS 15 LANGTON MINIATURES 15 LEICESTER MICROMODELS 16 LEN JORDAN MODELS 16 LIMITED EDITIONS 16 LLYN 17 LOFTLINES 17 MARINE ARTISTS MODELS 18 MB/HIGHWORTH MODELS 18 MOUNTFORD MODELS 18 NAVWAR 19 NELSON 20 NKC SHIPS 20 OCEANIC 20 PEDESTAL 21 PIER HEAD MODELS 21 SANTA ROSA SHIPS 21 SEA-VEE 23 SKYTREX/MERCATOR (TRITON 1250) 25 Mercator (and Atlantic) 28 SOLENT MODEL SHIPS 31 TRIANG 31 TRIANG MINIC SHIPS LIMITED 33 (i) WASS-LINE 34 WMS (Wirral Miniature Ships) 35 CHAPTER 3 CONTINENTAL MANUFACTURERS 36 Major Manufacturers 36 ALBATROS 36 ARGONAUT 36 RN Models in the Original Series 37 USN Models in the Original Series 38 ARGOS 38 CARAT & CSC 39 CM 40 DELPHIN 43 ‘G’ (the models of Georg Grzybowski) 45 HAI 47 HANSA 49 KLABAUTERMANN 52 NAVIS/NEPTUN (and Copy) 53 NAVIS WARSHIPS 53 Austro-Hungarian Navy 53 Brazilian Navy 54 Royal Navy 54 French Navy 54 Italian Navy 54 Imperial Japanese Navy 55 Imperial German Navy (& Reichmarine) 55 Russian Navy 55 Swedish Navy 55 United
    [Show full text]
  • IMCA D010 Diving Operations from DP Vessels
    ABF Diving Operations from Vessels Operating in Dynamically Positioned Mode International Marine Contractors Association IMCA D 010 Rev. 3 May 2008 www.imca-int.com AB The International Marine Contractors Association (IMCA) is the international trade association representing offshore, marine and underwater engineering companies. IMCA promotes improvements in quality, health, safety, environmental and technical standards through the publication of information notes, codes of practice and by other appropriate means. Members are self-regulating through the adoption of IMCA guidelines as appropriate. They commit to act as responsible members by following relevant guidelines and being willing to be audited against compliance with them by their clients. There are two core activities that relate to all members: Safety, Environment & Legislation Training, Certification & Personnel Competence The Association is organised through four distinct divisions, each covering a specific area of members’ interests: Diving, Marine, Offshore Survey, Remote Systems & ROV. There are also four regional sections which facilitate work on issues affecting members in their local geographic area – Americas Deepwater, Asia-Pacific, Europe & Africa and Middle East & India. IMCA D 010 Rev. 3 This guidance has been produced under the direction of the IMCA Diving Division Management Committee. This document supersedes all previous versions of IMCA D 010 published since January 1998, with are now withdrawn. www.imca-int.com/diving The information contained herein is given for guidance only and endeavours to reflect best industry practice. For the avoidance of doubt no legal liability shall attach to any guidance and/or recommendation and/or statement herein contained. Diving Operations from Vessels Operating in Dynamically Positioned Mode IMCA D 010 Rev.
    [Show full text]
  • Part 5: Specialized Services
    Part 5: Specialized Services RULES FOR BUILDING AND CLASSING OFFSHORE SUPPORT VESSELS 2013 PART 5 SPECIALIZED SERVICES American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 Copyright 2012 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA Rule Change Notice (2013) Rule Change Notice (2013) The effective date of each technical change since 1993 is shown in parentheses at the end of the subsection/paragraph titles within the text of each Part. Unless a particular date and month are shown, the years in parentheses refer to the following effective dates: (2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (1998) 13 May 1998 (1994) 9 May 1994 (1997) 19 May 1997 (1993) 11 May 1993 Listing by Effective Dates of Changes from the 2011 Guide Notice No. 2 (effective on 1 July 2012) to the 2011 Guide, which is incorporated in the 2013 Rules, is summarized below. EFFECTIVE DATE 1 July 2012 – shown as (1 July 2012) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks 5-1-1/5.1 Class Notations To align notations with changes to Sections 5-1-2, 5-1-3, and 5-1-4 and Chapters 5-6, 5-11, and 5-15. (Incorporates Notice No. 2) 5-1-1/Table 1 <No Title> To align notations with changes to Sections 5-1-2, 5-1-3, and 5-1-4 and Chapters 5-6, 5-11, and 5-15.
    [Show full text]
  • Diving Support Vessel – 345Ft
    Designers & Builders since 1889 Diving Support Vessel – 345ft Designed for • Diving operations up to 300 m • Offshore construction, inspection, maintenance and repair works • Lifting operations up to 300 ton • Offshore accommodation Main Features • 12 man Sat Dive system • 250 persons accommodation • 300 tons main crane • Work deck area more than 1000 m 2 Designers & Builders since 1889 Diving Support Vessel – 345ft Main particulars Propulsion Machinery Dynamic Positioning Length, overall 105.13 m Propulsion: Diesel Electric Redundant Dynamic Positioning Breadth, moulded 24.00 m Generator sets: 4 x Caterpillar 3516 @ System: NAVIS DP system on aft bridge Depth to maindeck 7.00 m 1825 ekW each and control station at forward Operating draft 4.00 m Total installed power from main navigation bridge Deadweight 5500 ton gensets: 7300 eKW Speed 11.0 Knots Current: 480 V/60 hz Reference systems: • 1 x Radius 1000 Classification: Main thrusters units: 2 x 1500 kW Fixed • 2 x DGPS Receivers LRS 100 A1, LMC, DPS-AA, FiFi II Pitch Propeller Azimuth units • 3 x Gyro Compass Note: Support vessel Bow thrusters units: 3 x 900 kW trans - • 2 x Motion Reference Units verse tunnel thrusters, each Fixed Pitch • 2 x Wind Sensors Flag: Solas special purpose ship Propeller • 1 x Hydro Acoustic System Mexican Flag • 1 x Laser Scan System Emergency/harbour power set: 1 x 425 eKW DP position keeping upto: Diving System Beam seas 35 knot wind 12 person sat dive system: • 1 x 6-man and 1 x 4-man double lock Accomodation chamber, heave compensated bell Fully airconditioned
    [Show full text]