aylor Dynamometer

CM-51 / Chassis Dynamometer

Image shown is for display only, actual CM-51 may vary.

CM-51 Water Brake Chassis Dynamometer

Specifications Recommended Accessories Weight Capacity: 25,000 lb (11,340 kg) per axle • Calibration Weights Roll Brakes: pneumatically-actuated disc • Stone Guard Shipping Weight: 8,340 lb (3,783 kg) • Exhaust Canopy Capacity: 1,100 hp at 80 mph (820 kW at 129 kph) • Horizontal Exhaust System Rolls: 20 by 36 in. (508 by 915 mm) long, • Water Recirculating System 4 front fixed rolls, 2 rear rolls fixed to • Guard Rail accommodate axle spreads from • Wheel Chocks

48 to 60 in. (1,219 to 1,524 mm) • DynPro2 Data Acquisition & Control System tandem centers Pit Required Depth: 27 in. (686 mm)

Everything you need to succeed Optional Accessories

Wheel Chocks M-Tach and O-Tach Optional Calibration Weights

Work Table Rear Wheel Stone Guard

Various Facility Support Systems and Services Available

DynPro2 Data Acquisition Exhaust Hood Water Design Services Commissioning, & Control System Recirculation Start-up & Training

(414) 755-0040 www.taylordyno.com 2 CM-51 (US Customary) 1200 1150 1100 1050 1000 950 900 850 800 750 700 650 600 550 500 Power (hp) Power 450 400 350 300 250 200 150 100 50 0

Speed (mph)

CM-51 (S.I.) 900 850 800 750 700 650 600 550 500 450 400 Power(kW) 350 300 250 200 150 100 50 0

Speed (kph)

(414) 755-0040 www.taylordyno.com 3 CM-51 (US Customary) 10000

9000

8000

7000

6000

5000

4000

3000 Tractive Effort(lb)

2000

1000

0

Speed (mph)

CM-51 (S.I.) CM-51 (S.I.) 50000 900 850 45000 800

40000750 700

35000650 600 ) 30000550 500 25000450 400 Power(kW) 20000350

Tractive Effort(N 300 15000 250 200 10000 150 100 5000 50

0 0

SpeedSpeed (kph) (kph)

(414) 755-0040 www.taylordyno.com 4 Infrared Space Heater

Optional Horizontal Exhaust Hood Exhaust

Floor Drain Optional Horizontal Exhaust

Center Line of Truck, Rolls & Canopy

Note: Vehicle length should be considered before determining the length of the test cell to be Infrared Space Heater constructed.

Optional Horizontal HVAC Controller Exhaust

Specifications Drawing Notes Weight Capacity: 25,000 lb (11,340 kg) per axle • AC power, air and water required at one side wall Roll Brakes: pneumatically-actuated disc as applicable. Shipping Weight: 8,340 lb (3,783 kg) • Room length, and pit location within length, Capacity: 1,100 hp at 80 mph (820 kW at 129 kph) must be determined by user to fit maximum Rolls: 20 by 36 in. (508 by 915 mm) long, truck length and rear overhang. 4 front fixed rolls, 2 rear rolls fixed to • Provide at least one man door for fire escape accommodate axle spreads from near rear of room, but not in rear wall because 48 to 60 in. (1,219 to 1,524 mm) someone entering during a test could be struck tandem centers by a stone flung from a tire. Provide ample fire Pit Required Depth: 27 in. (686 mm) extinguishers at each door and near driver. • “Back-on, Drive-off” installation configuration preferred.

Everything you need to succeed

aylor 3602 West Wheelhouse Road, Milwaukee, Wisconsin 53208 U.S.A. Dynamometer (414) 755-0040 www.taylordyno.com SMS3004v003 (414) 755-0040 www.taylordyno.com 5