DOCSLIB.ORG

Today My Life Begins I've Been Working Hard So Long Seems Like Pain Has Been My Only Friend My Fragile Heart's Been Done So Wron

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Today My Life Begins I've Been Working Hard So Long Seems Like Pain Has Been My Only Friend My Fragile Heart's Been Done So Wron Today My Life Begins In 1842, John Greenough patented the first sewing machine in the United States. I've been working hard so long Elias Howe, born in Spencer, Massachusetts, created his sewing machine in 1845, seems like pain has been my only friend using a similar method to Hunt's, except the fabric was held vertically. The major improvement he made was to have the needle running away from the point, starting my fragile heart's been done so wrong from the eye. After a lengthy stint in England trying to attract interest in his i wondered if I machine he returned to America to find various people infringing his patent, among [4] I'd ever heal again them Isaac Merritt Singer. He eventually won his case in 1854 and was awarded the right to claim royalties from the manufacturers using ideas covered by his patent. This included Singer. oh just like all the seasons never stay the same all around me i can feel a change (oh) Trained as an engineer, Singer saw a rotary sewing machine being repaired in a Boston shop. He thought it to be clumsy and promptly set out to design a better one. i will break these chains that bind me, happiness His machine used a flying shuttle instead of a rotary one; the needle was mounted vertically and included a presser foot to hold the cloth in place. It had a fixed arm to will find me hold the needle and included a basic tensioning system. This machine combined leave the past behind me, today my life begins elements of Thimonnier's, Hunt's, and Howe's machines. He was granted an a whole new world is waiting it's mine for the taking American patent in 1851 and it was suggested he patent the foot pedal (or treadle) used to power some of his machines; however, it had been in use for too long for a i know i can make it, today my life begins patent to be issued. When Howe learned of Singer's machine he took him to court. Howe won and Singer was forced to pay a lump sum for all machines already yesterday has come and gone produced. Singer then took out a license under Howe's patent and paid him $1.15 per machine. Singer then entered a joint partnership with a lawyer named Edward and I've learn how to leave it where it is Clark, and they formed the first hire-purchase (time payment) scheme to allow and i see that i was wrong people to afford to buy their machines. for ever doubting i could win Meanwhile Allen B. Wilson had developed a shuttle that reciprocated ("vibrated") oh just like all the seasons never stay the same in a short arc, which was an improvement over Singer's and Howe's. However, John Bradshaw had patented a similar device and was threatening to sue. Wilson decided all around me i can feel a change (oh) to try a new method. He went into partnership with Nathaniel Wheeler to produce a machine with a rotary hook instead of a shuttle. This was far quieter and smoother i will break these chains that bind me, happiness than the other methods, and the Wheeler and Wilson Company produced more machines in 1850s and 1860s than any other manufacturer. Wilson also invented the will find me four-motion feed mechanism; this is still seen on every machine today. This had a leave the past behind me, today my life begins forward, down, back, and up motion, which drew the cloth through in an even and a whole new world is waiting it's mine for the taking smooth motion. Charles Miller patented the first machine to stitch buttonholes.[5] Through the 1850s more and more companies were being formed and were trying to i know i can make it, today my life begins sue each other. This triggered a patent thicket known as the Sewing Machine War.[6] life's to short to have regrets In 1856 the Sewing Machine Combination was formed, consisting of Singer, Howe, so I'm learning now to leave it in the past and try to Wheeler and Wilson, and Grover and Baker. These four companies pooled their forget patents, meaning that all the other manufacturers had to obtain a license and pay $15 per machine. This lasted until 1877 when the last patent expired. only have one life to live so you better make the best of it James Edward Allen Gibbs (1829–1902), a farmer from Raphine in Rockbridge County, Virginia patented the first chain-stitch single-thread sewing machine on i will break these chains that bind me, happiness June 2, 1857. In partnership with James Willcox, Gibbs became a principal in will find me Willcox & Gibbs Sewing Machine Company. Willcox & Gibbs commercial sewing machines are still used in the 21st century. leave the past behind me, today my life begins a whole new world is waiting it's mine for the taking In 1877 the world’s first crochet machine was invented and patented by Joseph M. i know i can make it, today my life begins Merrow, then-president of what had started in the 1840s as a machine shop to develop specialized machinery for the knitting operations. This crochet machine i will break these chains that bind me, happiness was the first production overlock sewing machine. The Merrow Machine Company went on to become one of the largest American Manufacturers of overlock sewing will find me machines, and continues to be a global presence in the 21st century as the last leave the past behind me, today my life begins American over-lock sewing machine manufacturer. a whole new world is waiting it's mine for the taking i know i can make it, today my life begins In 1885 Singer patented the Singer Vibrating Shuttle sewing machine, which used today my life begins... Allen B. Wilson's idea for a vibrating shuttle and was a better lockstitcher than the oscillating shuttles of the time. Millions were produced until finally superseded by rotary shuttle machines in the 20th century. In 1905 Merrow won a lawsuit against Willcox & Gibbs for the rights to the In 1791 British inventor Thomas Saint was the first to patent a design for a sewing original crochet stitch. machine.[2] His machine was meant to be used on leather and canvas. Saint's contribution was not made public until 1874 when William Newton Wilson, a sewing machine manufacturer, found the drawings in the London Patent Office and Sewing machines continued being made to roughly the same design, with more built a machine that worked, following some adjustments to the looper. There is a lavish decoration appearing until well into the 1900s when the first electric model in the London Science Museum. It has been claimed that Saint never had a machines started to appear. The first electric machines were developed by Singer [7] working model. This is unlikely, because he was a skilled cabinet maker and he Sewing Co. and introduced in 1889. At first these were standard machines with a managed to get so many features right. So, in 1790 Thomas Saint had invented a motor strapped on the side. As more homes gained power, these became more machine with an overhanging arm, a feed mechanism — adequate for the short popular and the motor was gradually introduced into the casing. lengths of leather for which he intended it for —a vertical needle bar and a looper. Described by some[who?] as the "Maytag of sewing machines"[clarification needed], the In 1814 an Austrian tailor Josef Madersperger, presented his first sewing machine, Necchi sewing machines from Italy were coveted for their aesthetically pleasing [citation needed] the development of which started in 1807. designs. In 1830 a French tailor named Barthélemy Thimonnier, patented a sewing machine In 1946, the first Toyota sewing machine was built under the strict supervision of that sewed straight seams using chain stitch. By 1841, Thimonnier had a factory of Toyota founder, Mr. Kiichiro Toyoda. 80 machines sewing uniforms for the French Army.[citation needed] The factory was destroyed by rioting French tailors afraid of losing their livelihood. Thimonnier had no further success with his machine. The lockstitch sewing machine was invented by Walter Hunt in 1833.[3] His machine used an eye-pointed needle (with the eye and the point on the same end) carrying the upper thread and a shuttle carrying the lower thread. The curved needle moved through the fabric horizontally, leaving the loop as it withdrew. The shuttle passed through the loop, interlocking the thread. The feed let the machine down, requiring the machine to be stopped frequently and reset up. Hunt eventually lost interest in his machine and sold it without bothering to patent it..
Load more

Recommended publications
  • Service Manual
    SERVICE MANUAL FOR SINGER MODEL 471U THE SINGER COMPANY From the library of: Superior Sewing Machine & Supply LLC CONTENTS (C MECHANISMS 1) 1 |T| Needle bar mechanism 1 fll] Clutch and brake 29 m Rotary hook mechanism I fi2] Cutter safety device 29 ITj Needle zigzag mechanism 2 [III Needle bar 31 |T| Feed mechanism 3 ini Rotary hook shaft 32 m Clutch mechanism 4 [i^ Upperclamping foot and lower B Cutter mechanism (1) 6 thread cutter 33 B Cutter mechanism (II) 7 [I^ Base needle plate and cutter [Tj Upper thread cutter mechanism 8 position control 34 B Lower thread cutter mechanism 9 Oil Upper clamping foot position control ... 35 [lo] Presser bar lifter mechanism 9 M Rotary hook 35 [li] Lubrication 36 Tension releasing mechanism 10 [2ol Needle sidewise movement ((DISASSEMBLY PROCEDURES)). adjustment 36 (HI Needle zigzag reference m Covers position adjustment 36 m Lower thread cutter HH Scissors assembly position control 38 m Presser HD Scissors guide position control 38 B Rotary hook [24] Covers 39 B Upper thread cutter B Length feed ((ADJUSTMENtH) 40 m Clamping foot 14 m Needle sidewise movement B Cutter safety device 15 adjustment 40 [9] Clutch and brake 15 m Needle bar and rotary U Feed 16 hook adjustment 40 Needle bar 16 m Upper clamping foot lifter un Cam relay 17 adjustment 42 M Upper shaft 17 m Cutter adjustment 44 Auxiliary shaft 18 m Buttonhole width and reference M Needle zigzag 18 position adjustment 46 Needle breakage detection 19 m Upper thread cutter adjustment 48 0 Cutter 19 m Lower thread cutter adjustment 50 Lower shaft
    [Show full text]
  • Sewing Cutting & Pressing Equipment
    L & HO RIA US TR EH S O U L D D N D IN SSEEWWIINNGG CCUUTTTTIINNGG && PPRREESSSSIINNGG EEQQUUIIPPMMEENNTT CHANDLER MACHINE U.S.A. L.L.C. www.chandlermachineco.com NEW JERSEY MIAMI LOS ANGELES ©2009 Chandler Machine USA -409 Formerly Chandler Machine Company of Ayer, MA PORTABLE BUTTON SEWER Model CM491 PORTABLE, HAND-OPERATED BUTTON SEWING MACHINE • No electricity needed • No experienced operator necessary. • Instant change for sewing both 2 and 4 hole buttons. • Six to ten seconds to sew on a button. • Automatic stop • Automatic thread-break. • Takes full range of button sizes. • Sews all types of flat buttons, • Twelve firm stitches in every button, with last two stitches double-locking button to material. • Exceptionally durable, high quality construction. • Net Weight (head only)- 37 lbs. • The finest, easiest to own and most practical machine for shirts, pajamas, uniforms, underwear and work clothes. Chandler Model CM491 CLASSIC HAND OPERATED BUTTON SEWER • completely portable and automatic Anyone can learn to • no electric plug or connections necessary Heavy operate it in minutes! • no motor to worry about Steel • no belts to break Stand AMAZINGLY FAST! also available Speedy, sure button replacement for eliminates labor and reduces customer CM491 complaints. This machine will meet all your Chandler Sews Them All tailor and cleaners service requirements! It's even easy enough and fast enough to be on a clothing producton line. End View of CM491 BUTTON SEWER / TACKING MACHINE CM24K MODEL CM24K on optional Single Needle, Single Thread stand Chainstitch, Cylinder Bed Button Sewing And Tacking Machines With Vibrating Clamp, Single Pedal Operation 8-16-32 Parallel Stitches Two Or Four Hole Button Sewing Operation Thread cut by scissor action Speed, Max.
    [Show full text]
  • Tailoring Series TECHNIQUES for TAILORING UNDERLINING a TAILORED GARMENT—Underlining Is a Second Layer of Fabric. It Is Cut By
    tailoring series TECHNIQUES FOR TAILORING UNDERLINING A TAILORED GARMENT—Underlining is a second layer of fabric. It is cut by the garment pattern pieces and staystitched to the wrong side of the corresponding outer sections before any seams are joined. The two layers are then handled as one. As a general guide, most suit jackets and coats look more pro- fessional when underlined. Underlining is especially recommended for lightweight wool materials, loosely woven materials and light- colored materials. For additional information on selecting fabrics for underlining and applying the underlining, see Lining a Shirt 01' Dress HE 72, N. C. Agricultural Extension Service. STAYSTITCHING—Staystitch all outer garment pieces before construction begins. If garment is underlined, stays-titching is done when the two layers of fabric are sewn together. Staystitch 1/3 in. outside seamline (on the seam allowance). Stay- stitch “ with matching cotton thread on all curved *areas that may stretch during construction such as necklines, side seams, shoulder seams, armholes, and side seams of skirt. Use directional stitching always to prevent stretching of fabric and to prevent one layer of fabric from riding. The direction to stitch is indicated by small arrows on the pattern on the seamlines. INTERFACINGS—Select a high quality hair canvas for the front and collar of coats and jackets. The percentage of wool indicates the quality—the higher the wool content of the canvas the better the quality. Since a high percentage of wool makes the hair canvas fairly dark in color, it cannot be used successfully under light-colored fabrics. In these cases use an interfacing lighter in color and lower in wool content.
    [Show full text]
  • MAINTENANCE, ADJUSTMENT and REPAIR of INDUSTRIAL SEWING MACHINES by WAYNE SNYDER, MASTER RIGGER US ACADEMY of PARACHUTE RIGGING
    MAINTENANCE, ADJUSTMENT AND REPAIR OF INDUSTRIAL SEWING MACHINES by WAYNE SNYDER, MASTER RIGGER US ACADEMY of PARACHUTE RIGGING Presented at the PIA INTERNATIONAL PARACHUTE SYMPOSIUM RENO, NEVADA February 2007 MAINTENANCE, ADJUSTMENT AND REPAIR OF INDUSTRIAL SEWING MACHINES PREMISE: You know how to sew and you are working with an “E” thread lock stitch sewing machine and it was sewing and now it’s gone bad. You probably just changed something – 98% of the time just go back and inspect and correct what you just did and you will be back in business. COMMON CASE SCENARIOS: A. Bobbin change B. Top thread change C. Jam D. Broken needle and/or changed needle Before we get into these specific areas, let’s go back and remember the basic way the machines work. All lock stitch machines make the same stitch. 301, 304, or 308: these are just lock stitch machines. “THE FLOW ACTION” • The needle does down • The needle goes below path of hook (Figure 1) • Needle bottoms out (B.D.C.) • Needle comes up (3/32 inch - common measurement), loop forms on hook side of needle (non-long groove side of the needle) (Figure 2) • Hook picks up top thread loop and carries it around bobbin case. (Figure 3) • Hook drops top thread off (Figure 4) • Thread take-up arm takes out slack and sets stitch in goods. (Figure 5) • Think of the bobbin thread as a long straight rod with the top thread spiraled around it. Sew a piece of paper with two different color threads – rip paper to remove it and there is your example.
    [Show full text]
  • Service Manual & Parts List Model: Nh60
    SERVICE MANUAL & PARTS LIST MODEL: NH60 1 INDEX LOCATE AND IDENTIFY PARTS ..................................................................................................3 WIND THE BOBBIN ......................................................................................................................4 PREPARE YOUR TOP THREAD ...................................................................................................5 LCD DISPLAY ...............................................................................................................................6 WHAT TO DO WHEN ................................................................................................................ 7-9 CHANGING EXTERNAL PARTS FACE COVER..............................................................................................................................10 FREE-ARM COVER ...................................................................................................................11 FRONT COVER .................................................................................................................... 12-13 REAR COVER .............................................................................................................................14 MECHANICAL ADJUSTMENT PRESSER BAR HEIGHT ............................................................................................................15 NEEDLE DROP POSITION ........................................................................................................16 ADJUSTMENT
    [Show full text]
  • Machine Maintenance Handout
    11/14/2019 EMBROIDERY MACHINE MACHINE MAINTENANCE Bill Garvin The more you know, the better you sew www.BGTECHSERVICES.NET 1 Stitch Hook Timing 11/14/2019 www.issshows.com 2 Rotary Hook Timing Hook timing Relationship between the tip of the rotary hook to the scarf on the back side of a needle 11/14/2019 www.issshows.com 3 1 11/14/2019 Rotary Hook Timing 11/14/2019 www.issshows.com 4 Rotary Hook Timing Correct timing position Common position settings for commercial machines 200 and 25 degrees on the timing wheel. Some machines are digital, Without mechanical number 11/14/2019 www.issshows.com 5 Rotary Hook Timing Jigs: Block and Round are common styles Block: Round: Normally Normally used for used for needle bar Hook timing depths as well as needle bar depths There are several different types of jigs that can assist with timing on your machine. These can normally be purchased from your machine distributor or from machine parts sellers 11/14/2019 www.issshows.com 6 2 11/14/2019 Rotary Hook Timing The Needle is the only metal that goes in a rotary hook can cause physical damage (burrs) The solution is sand paper: 80 grit and 1,000 grit is what BG TECH SERVICES uses 11/14/2019 www.issshows.com 7 Bobbin Cases Most sewing issues are created by the bobbin case 11/14/2019 www.issshows.com 8 11/14/2019 www.issshows.com 9 3 11/14/2019 Reciprocator and Needle Bar Driver This drives the needle up and down to create a stitch Good Reciprocators Life expectancy is forever - However, they are designed to break (human error) 11/14/2019 www.issshows.com
    [Show full text]
  • Simplified Sewing: Hems
    South Dakota State University Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange SDSU Extension Fact Sheets SDSU Extension 1964 Simplified Sewing: Hems Cooperative Extension South Dakota State University Follow this and additional works at: https://openprairie.sdstate.edu/extension_fact Recommended Citation South Dakota State University, Cooperative Extension, "Simplified Sewing: Hems" (1964). SDSU Extension Fact Sheets. 865. https://openprairie.sdstate.edu/extension_fact/865 This Fact Sheet is brought to you for free and open access by the SDSU Extension at Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. It has been accepted for inclusion in SDSU Extension Fact Sheets by an authorized administrator of Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. For more information, please contact [email protected]. .. ... -~--- - --v · . --,-.-.- , -. ·. ..•, .. ·'··· .••,.,. - .t:\. --(. ......., • ... ·\•i• ....,.,•-•1•,··...- .,.. "\' ·,- • • • -:\. -: ·):.~\:,..,:}:,:.·,:,..,:;:,:.~:,-:-,:.0:.- ·,~\:,.!;;;; ··:,:.\!.t:,-;..:,t;.,:,:,:.i:1:,:.'.:.•; .-·F_:,~::::_:.~:~~~~~;.:::z~:;:'.·---~-~;:~~L ::·.1~~~~1::.:;.:_;~~: File Copy FS244 THE l-lE~I of your dress can have the "professional - Wearer should stand in a natural position with look" or the "homemade look." In general, the best arms at sides and weight on both feet. hem is the least conspicuous, and every step in making a hem is planned with this in mind There are several methods of marking a hem. You may use any one of these: The professional touch is recognize-cl by the follow- ing characteristics: Various types of chalk markers or pin markers - Inconspicuous from the right side Yardstick - Even distance from the floor Tailor's square. - Wide enough for good proportion and to gi\.re With some of these you can mark enough weight to hang well your own hem; others require a - Even in width help«.
    [Show full text]
  • 146RB Series Spec Sheet
    47 146RB Series MODELS: 146RB-1A-1/146RB-2A-1/146RB-3A-1 146RBL-30-1A/146RBL-30-2A/146RBL-30-3A with 30” arm length With HORIZONTAL AXIS TRANSVERSE ROTARY HOOK LARGE BOBBIN WIDE ZIG-ZAG REVERSE FEED SEE REVERSE SIDE FOR MACHINES FEATURING STITCH TYPES 304, 308 LONG ARM AND WETSUIT VERSIONS 146RB-1A-1 SINGLE NEEDLE DROP FEED WALKING FOOT ZIG-ZAGZIG-ZAG G LOCKSTITCH MACHINE A 146RBL-30 Z 30” Long Arm 146RBL-30 LONG ARM VERSION in 1A, 2A or 3A configuration G (special order) Also available for WET SUIT material - (WS) I Interchangeable between 1A, 2A, 3A Stitches Z by changing gears and cams. (Comes with one set, other sets optional) Models: 1 46RB-1A-1/146RB-2A-1/146RB-3A-1 146RBL-30-1A /146RBL-30-2A /146RBL-30-3A (special order) 146RB-1A-1 – For sewing medium to heavy weight fabrics that are difficult to feed when sewn. • For such materials and products as wet suits, shoes, boots, leather, tarpaulins. Federal Stitch 304 146RB-2A-1 – Three step/two stitch zig-zag • For sewing elastic and other stretch materials • For stitching such products as boat and truck covers, tents, awnings, sails, parachutes, tarpaulins and similar products • Used on such materials as canvas, nylon, vinyl, leather, synthetics and similar materials. • Especially desirable where reinforced stitch is necessary. Federal Stitch 308 146RB-3A-1 – Four step/three stitch zig-zag • Performs similar operations as Model 146RB-2A with the added advantage of making an additional stitch for extra reinforcement. 146RBL – Same subclasses as above, but with 30" long arm for 30 inches of workspace.
    [Show full text]
  • Taking Shape DARTS ADD SHAPE TURNING a FLAT PIECE of FABRIC INTO a THREE-DIMENSIONAL FORM to MATCH the CONTOURS of the BODY LINDA TURNER GRIEPENTROG
    Techniques Taking Shape DARTS ADD SHAPE TURNING A FLAT PIECE OF FABRIC INTO A THREE-DIMENSIONAL FORM TO MATCH THE CONTOURS OF THE BODY LINDA TURNER GRIEPENTROG ustline, hip, waistline to tummy, elbow and shoulder. Darts can be horizontal, vertical or anywhere in between, straight or curved, but the stitching principles are the same. BThe goal of quality dart stitching is smooth, pucker-free points that don’t call attention to themselves. SHAPING A single-point dart is shaped like a triangle, and when stitched it takes a wedge of fabric out of the garment allowing for controlled fullness at the point. A single dart may be on the lengthwise fabric grain, angled or slightly curved. (1) A double-point or contour dart is diamond or rugby ball shaped, and is used to shape the waistline, leaving fullness at both ends for the bust and hip. (2) A French dart is a curved shape from the garment side seam to the bustline. This dart has cut edges joined like a seam. (3) V9082 Vintage Vogue, 1960. Misses’ A5(6-8-10-12-14) E5(14-16-18-20-22). Sew Rating: Average. Price code Orange. Illustrations: Theresa O’Connell Theresa Illustrations: 1 2 3 26 SEW TODAY May/June 2019 MARKING to anchor the stitches. Stitch (7) and stitch toward the point, Darts are indicated on the along the line, removing the A third technique for dart then repeat for the other pattern tissue by either solid pins as you get to them. Taper point, slightly overlapping or dashed lines and a dot the stitching to the point the beginning stitching lines at the point.
    [Show full text]
  • Scissors [680
    Sales office: +39 015 40 1935 - [email protected] www.tessilmarket.it Scissors TESSILMARKET srl CODE TBFL0110 TBFL0113 DESCRIPTION SEWING SCISSORS SEWING SCISSORS Blades = nickel plated steel with steel handles Blades = nickel plated steel with steel handles FEATURES Lenght = tot. 10 cm. (4”) Lenght = tot. 13 cm. (5”) Blades = 3,5 cm. (1,35”) Blades = 5 cm. (2”) WEIGHT 30 gr. 42 gr. CODE TBFL0115 TBFL0213 DESCRIPTION SEWING SCISSORS DRAPER SCISSORS Blades = nickel plated steel with steel handles Blades = nickel plated steel with pla- stic handles FEATURES Lenght = tot. 15 cm. (6”) Lenght = tot. 13 cm. (5”) Blades = 6 cm. (2,5”) Blades = 5 cm. (2”) WEIGHT 60 gr. 45 gr. CODE TBFL0218 TBFL0315 DESCRIPTION DRAPER SCISSORS DRAPER SCISSORS Blades = nickel plated steel with plastic Blades = inox plated steel ASI420 with handles nylon handles FEATURES Lenght = tot. 18 cm. (7”) Lenght = tot. 15 cm. (6”) Blades = 7,5 cm. (3”) Blades = 6,5 cm. (2,5”) WEIGHT 75 gr. 45 gr. Sales office: +39 015 40 1935 - [email protected] www.tessilmarket.it Scissors TESSILMARKET srl CODE TBFM0110 TBFM0113 DRAPER SCISSORS DESCRIPTION DRAPER SCISSORS Blades = with rounded tips in nickel plated steel with plastic Blades = with rounded tips in nickel plated steel handles and steel handles FEATURES Lenght = tot. 10 cm. (4”) Lenght = tot. 13 cm. (5”) Blades = 4 cm. (1,6”) Blades = 5 cm. (2”) WEIGHT 25 gr. 42 gr. CODE TBFM0216 TBFR0110 DESCRIPTION DRAPER SCISSORS EMBROIDERY SCISSORS Blades = with rounded tips in nickel plated steel with plastic Blades = sharp tips in nickel plated steel handles and steel handles FEATURES Lenght = tot.
    [Show full text]
  • 80739083.Pdf
    3-~"'81 8-1355 ~.(O~ All About ... • Pattern Selection • Fabric Selection • Contemporary Techniques • Fusible Interfacings • Finishing Tips CONTENTS Page Pattern Selection. ............................................... .. 3 Fabric Selection ................................................ .. 3 Notions. ....................................................... .. 3 Pressing Points ................................................. .. 4 Inner Fabrics. .................................................. .. 4 Underlining. ................................................. .. 4 Interfacing. .................................................. .. 4 Lining. ..................................................... .. 5 Preparation ............................................ .. 5 Fabric. ...................................................... .. 5 Pattern Fit. .................................................. .. 5 Cutting and Marking. ......................................... .. 5 Comparison of Custom and Contemporary Tailoring Techniques. ...... .. 5 Front and Back Interfacing. ...................................... .. 5 Fusible Method-Front. ...................................... .. 5 onfusible Method-Back Reinforcement. ....................... .. 6 One-Piece Method. ........................................ .. 6 Two-Piece Method ......................................... .. 6 Applying Back Reinforcement .................................. .. 7 Lapel and Roll Line ............................................. .. 7 Marking the Roll Line , 8 Taping the
    [Show full text]
  • Savile-Row-Inside-Out.Pdf
    Savile Row: Inside Out 1 Savile Row BeSpoke aSSociation he Savile Row Bespoke Association is dedicated to protecting and promoting Tthe practices and traditions that have made Savile Row the acknowledged home of the best bespoke tailoring and a byword for unequalled quality around the world. The SRBA comprises of fifteen member and associate houses, who work together to protect and champion the understanding of bespoke tailoring and to promote the ingenious craftsmen that comprise the community of Savile Row. The SRBA sets the standards that define a Savile Row bespoke tailor, and all members of the Association must conform to the key agreed definitions of a bespoke suit and much more besides. A Master Cutter must oversee the work of every tailor employed by a member house and all garments must be constructed within a one hundred yard radius of Savile Row. Likewise, every member must offer the customer a choice of at least 2,000 cloths and rigorous technical requirements are expected. For example, jacket foreparts must be entirely hand canvassed, buttonholes sewn, sleeves attached and linings felled all by hand. It takes an average 50 plus hours to produce a suit in our Savile Row cutting rooms and workshops. #savilerowbespoke www.savilerowbespoke.com 2 1 Savile Row: inSide out Savile Row: Inside Out looks inside the extraordinary world of bespoke tailoring; an exclusive opportunity to step behind the scenes and celebrate the tailor’s art, the finest cloth and the unequalled expertise that is British Bespoke. A real cutter will be making a real suit in our pop-up cutting room in front of a collection of the work – both ‘before’ and ‘after’ to show the astonishing level of craftsmanship you can expect to find at Savile Row’s leading houses.
    [Show full text]