Shopping List for Pole Bicycle Frameset

Total Page：16

File Type：pdf, Size：1020Kb

Shopping list for Pole Bicycle frameset Component Size / standard Notes BRAKES Front Brake Disc brake only, I.S. mount 4 pistons for enduro, 2 pistons for trail Rear Brake Disc brake only, I.S. mount 4 pistons for enduro, 2 pistons for trail Front Brake Rotor 180mm trail, 200-220mm enduro Match system to wheel mount Rear Brake Rotor 160-180mm trail, 180-200mm enduro Match system to wheel mount COCKPIT Stem Stem Ø = handlebar Ø Handlebar Handlebar Ø = Stem Ø Grips Avoid open-end grips for safety Driveside Clamp Match to brake & shifter standard Non-Driveside Clamp Match to brake standard. Usually included with the brakes. SEAT Saddle MTB capable for safety Standard: 30.9mm | Insert depth: S Seatpost 188mm, M 208mm, L 250mm, XL 278mm SUSPENSION -Evolink 1.4: 210x55mm - Metric Some shocks might not fit in the frame or might block the -Stamina 140: 210x55mm use of bottle. Consult [email protected] if you are Shock -Stamina 160: 230x65mm unsure -Stamina 180: 250x75mm Tapered -Evolink 1.4: 150-160mm * Front travel depends on rear travel. When built as 29er, -Stamina 140: 140-160mm we suggest using a 180mm fork. When built with mixed Fork -Stamina 160: 160-170mm | 180mm * wheel size, we suggest using a 170mm fork. Consult -Stamina 180: 180mm [email protected] if you are unsure DRIVETRAIN (GROUPSET) Rear Derailleur one-by only Match to shifter, chain & cassette Shifter one-by only Match to derailleur, chain & cassette Chain one-by only Match to shifter, derailleur & cassette Cassette one-by only Match to shifter, derailleur & chain Chainring 32T, 34T or 36T | one-by Match to BB & chain Crankset only Bottom Bracket 73mm threaded Compatible with 30mm axle standard Pedals Use MTB pedals for safety WHEELS Front Tyre 29" / 27,5"+ Match with the fork Rear Tyre 2.8″ (27.5″), 2.6″ (29″) Front Wheel Internal width: 25-30mm | 29" / 27,5" Boost or non-boost Rear Wheel Internal width: 25-30mm | 29" / 27,5" Boost or non-boost OTHERS Headset Spacers Not necessary but recommended Cables Usually included with the drivetrain Cable housing For drivetrain cable & dropper seatpost Cable ties Pole Bicycles framesets include: Rear axle Derailleur hangers for Boost & non-Boost rear wheel Seat clamp Headset Shock .

Copy Link

Recommended publications

Timemachine OWNERS MANUAL
timemachine OWNERS MANUAL ENGLISH www.bmc-racing.com timemachine OWNERS MANUAL Owners Manual – english Contents CONTENTS Owners Manual Introduction 3 Positioning 5 How to measure your position 5 Determine the right frame size and configuration 8 Seat post hardware position 10 Frameset overview 11 Building a timemachine 13 Recommended tooling 13 Recommended procedure 14 Frame preparation 14 Di2 specific parts 14 Parts to check 15 Brakesets 16 Assembling the brake arms 16 Brake cable routing (front) 18 Installing the pipe on front brake 19 Brake cable routing (rear) 19 Cable tension (front brake) 21 Cable tension (rear brake) 22 Brake pads setting 22 Di2 shifting 24 Cable routing 25 Handlebar specifics 27 Mechanical shifting 27 Cable routing 27 Hingefork and headset 29 Headset parts overview 29 Assembly procedure 29 P2p stem system 31 Headset parts overview 31 Assembly procedure 32 P2p seatpost 33 Seat post clamp 33 Service instructions 35 Washing your bike 35 Troubleshooting 37 Introduction Introduction 2 | 3 BMC timemachine frame and components are designed as a system to provide a very high level of aerodynamics and riding performance. Adjustability was not in any way compromised and the timemachine offers the highest adjustment possibility ever built into a fully integrated time trial bicycle. Adjustability being a key part of the system’s performance, it is necessary to understand that most components of the frameset have been designed specifically for timemachine and their function may slightly differ from your traditionnal road bike “off the shelf” components. BMC timemachine uses all the latest and most high-end technologies that can be found in bicycle manufacturing, including sharp edged and thin-walled carbon fiber composite construction, which should be treated with delicacy from the end user to prevent permanent Introduction and sometimes invisible damage.
[Show full text]
Lubricant on Test : Silca Synergetic
Worlds most exhaustive independent bicycle chain lubricant and chain testing – over 300,000km of controlled testing to date. Lubricant On Test : Silca Synergetic Cost: $53.95 Aud from Zero Friction Cycling and other online stores. Size – 59ml Photo : Manufacturers Description on package; Up to 50% reduction in friction and 90% reduction in wear. Ultra quiet, ultra fast, ultra long lasting. Directions on package For best results thoroughly clean chain before applying. SHAKE WELL! Apply one (1) drop per chain roller and backpedal 12 revolutions to work oil into chain. Wipe chain clean before riding. Extra information from Manufacturer website What is it? The Ultimate Oil Based Lube SILCA's new oil-based lubricant based on technology originally developed in F1 racing, to reduce friction and nearly eliminate wear in all metal components. Who's it for? This lube is for the demanding cyclist who wants to experience the lower friction, increased lifespan, and silence of the most advanced lubrication technologies without the extra work involved with deep cleaning, drying, and waxing their chain. WHY WE DESIGNED IT: Electron microscopy of this phenomena was first reported by Paula Ussa Aldana at the University of Lyon in France a few years back. She was able to section the test samples to expose the tribofilm, showing exactly how the WS2 nano platelets are being held in the tribofilm of ZDDP. Tribofilm formed in the wear groove of a test pin. In SILCA testing, the use of a significantly more advanced base oil than used in the University of Lyon testing has shown further improvements in both wear and friction, while careful balancing of the formulation has allowed us to mass produce the resulting oil at an attainable price despite the exotic cost of some of the ingredients.
[Show full text]
THE DRIVETRAIN DILEMMA Companies Committed to Making True Touring Bikes Operate in a Niche Largely Ignored by the Big Two Component Manufacturers by Dan D’Ambrosio
THE DRIVETRAIN DILEMMA Companies committed to making true touring bikes operate in a niche largely ignored by the Big Two component manufacturers by Dan D’Ambrosio et’s say you’re the lead bike designer road bike components. future I think you will continue to see for Novara, the bike line offered That means Shimano’s long-cage wider gear ranges being added to our by REI for 32 years – every one of mountain bike derailers, with their road line up and more options for Di2,” them including a dedicated touring ability to handle the big cogs Co- said Shimano American Road Product bike — and you’ve just sat down at Motion wants to use to get at least a Manager Dave Lawrence. Lyour computer to start working on next 20-inch low gear on their touring bikes, Shimano is still making the 9-speed year’s specs. no longer work with Shimano’s road XT rear derailer, even though it quit You will soon be dealing with a bike shifters. making the rest of the group, because familiar frustration — finding the Stehley explained that Shimano there are still companies like Co- components you want for your new used to have a 1-to-1 actuation ratio Motion ordering a lot of them. Indeed touring bike, particularly where the with both types of components, road the 2015 Novara Radonee also uses an drivetrain and gearing are concerned. and mountain, meaning the shifters XT rear derailleur. “Over the years, it has been a bit of pulled the same amount of cable at the “For flat-handlebar-touring cyclists, struggle as the two major component derailer, making them compatible.
[Show full text]
2019 P5 Retailer Assembly Manual Table of Contents List of Tools & Supplies
2019 P5 RETAILER ASSEMBLY MANUAL TABLE OF CONTENTS LIST OF TOOLS & SUPPLIES Important Information .....................................1 Extension & Basebar - Di2 Cable Routing .................22 This manual outlines a number of procedures Tools Tools List of Tools & Supplies ..................................2 Extension & Basebar - eTap Cable Routing ................23 for making optional adjustments to the P5 which P5 Parts List .............................................3 Extension & Basebar - Mechanical Cable Routing ..........24 differ from the way the bicycle is originally sold Bicycle workstand (types which Frame Features............................................4 Electric Cable Installation ..............................25 by Cervélo.The following tools and parts listed secure bike by the seatpost, or Phillips-head screwdriver Small Parts...............................................5 Mechanical Cable Installation ............................26 are required for these adjustments. These parts pro-type stand with fork mount) Frame Preparation.........................................6 Top Tube SmartPak Installation...........................27 are not available for consumer purchase and are Brake Housing Routing .....................................8 Stem SmartPak Installation ...............................28 only available for purchase by Cervélo retailers. Electric Cable Routing...................................10 Seatpost Assembly .......................................29 Cervélo strongly recommends that all assembly Torque
[Show full text]
2014 EN 2014 Th Index 80 ANNIVERSARY 4 2013 TEAMS 6
EN EN www.campagnolo.com 2014 2014 th Index 80 ANNIVERSARY 4 2013 TEAMS 6 GROUPSETS 10 COMPONENT TECHNOLOGIES 12 ELECTRONIC DRIVETRAINS 28 SUPER RECORDTM EPSTM 30 RECORDTM EPSTM 34 ATHENATM EPSTM 38 MECHANICAL DRIVETRAINS 42 SUPER RECORDTM 44 RECORDTM 46 CHORUSTM 48 ATHENATM 50 CENTAURTM 54 VELOCETM 58 WHEELS 62 WHEEL TECHNOLOGIES 64 CARBON WHEELS 72 BORATM ULTRATM TT 73 BORATM ULTRATM 80 74 BORATM ULTRATM TWO 75 BORATM ULTRATM 35 76 BORATM ONETM 77 BORATM ONETM 35 78 HYPERONTM ULTRATM TWO 79 ALU/CARBON WHEELS 80 BULLETTM ULTRATM 81 BULLETTM ULTRATM 80mm 82 BULLETTM ULTRATM105mm 83 BULLETTM 84 BULLETTM 80mm 85 ALUMINIUM WHEELS 86 SHAMALTM ULTRATM 87 EURUSTM 88 ZONDATM 89 SCIROCCOTM 35mm 90 VENTOTM ASYMMETRICTM 91 KHAMSINTM ASYMMETRICTM 92 NEUTRONTM ULTRATM 93 TRIATHLON / TIME TRIAL 94 COMPONENTS 96 WHEELS BORATM ULTRATM TT 100 SUGGESTED WHEELS 101 CYCLOCROSS 102 COMPONENTS 104 WHEELS BORATM ONETM CX 106 BORATM ONETM 35 CX 107 SCIROCCOTM 35mm CX 108 KHAMSINTM ASYMMETRICTM CX 109 PISTA COMPONENTS RECORDTM PISTATM 110 WHEELS GHIBLITM 111 PISTATM 111 TECH DATA 114 SERVICE CENTER 142 SALES NETWORK 144 4 80th ANNIVERSARY 5 2013: CAMPAGNOLO 80th ANNIVERSARY 2013 is the year of Campagnolo 80th Anniversary and Vincenzo Nibali wins the Giro d’Italia riding with the 80 Anniversary groupset. 80 years of cycling innovation and passion for the most beautiful sport in the world have been crowned by the legendary victory of Vincenzo Nibali, rider and leader of the Team Astana. A success built stage after stage and signed with an epic undertaking that reproduce the most beautiful moments of the past.
[Show full text]
Nitrogen Disc 286A: Assembly Guide
NITROGEN DISC 286A: ASSEMBLY GUIDE Valid for MY2019/20 Nitrogen Disc 286A Revision 3.0 - 03.12.2019 NITROGEN DISC 286A: Table of Contents 1. Tools Needed and First Aid Kit ...........................3 My Nitrogen Disc 2. Frameset inspection .....................................4 Date of purchase: 3. Frameset Parts, SKUs and descriptions ..................5-6 Retailler: Size: 4. Assembly instructions ................................7-22 Serial Number: 4.1. Headset Installation ...............................7-9 4.2. Seat Post Installation ................................10 4.3. Seat Post Assembly .................................11 4.4. Front Derailleur Adjustement .......................12 4.5. Rear Derailleur Hanger Adjustment ..................13 4.6. Mechanical groupset specification ............... 14-16 4.7. Electronic (Di2) groupset specification ........... 17-21 4.8. Electronic (Wireless) groupset specification ..........22 5. Min/Max Seat Post Insertion .............................23 For the warranty to be valid, the bicycle must be fully assembled by an authorized Argon 18 dealer. High end components, particularly carbon parts, need extra care when assembled. These components must be installed using a calibrated torque wrench to make sure every bolt is at the right torque setting to prevent damage. 2 NITROGEN DISC 286A: 1. Tools Needed and First Aid Kit Tools needed for assembly 1: Bearing Cup Press (Park Tool HHP-2) 2: Allen Key Set 3: Grease 4: Utility Pick Set (Park Tool Item #UP-SET) 5: Clean Rags 6: Derailleur Hanger Alignment Gauge (Park Tool Item #DAG-2 or #DAG-2.2) 7: Cables and Housing Cutter 8: Carbon Paste 9: Loctite #242 10: Torque Wrench First Aid Kit: Essential parts to always have on hand IN CASE OF EMERGENCY…THIS MIGHT SAVE YOUR RIDE! 1: Spare rear derailleur hanger assembly 2: Seat post collar (Direct mount option if utilized) 80802 80832 3 NITROGEN DISC 286A: 2.
[Show full text]
Electronic Shifting
BIKETEST | ELECTRONIC SHIFTING RICHARD HALLETT Technical Editor Bike test ELECTRONIC SHIFTING Just for racers or an upgrade for the rest of us? Richard Hallett reviews a Trek Domane SLR7 and a Specialized Tarmac Expert eTAP LECTRONIC DERAILLEUR gear entrant is SRAM, whose eTAP concept arrived FRAME & FORK shifting has come a long way in in 2015 to considerable acclaim both for its IsoSpeed is the name chosen by Trek for the the quarter of a century since wireless operation and for its highly original vibration-dissipating technology found on the E French manufacturer Mavic gave functionality. Wisconsin firm’s Domane endurance road the ZMS – or ‘Zap’ – system its prototype If there’s a common feature of road bikes bikes. The first generation Domane, launched debut at the 1992 Tour de France. Then that are specified with electronic shifting, it is in 2012, featured a rear ‘de-coupler’ with a little more than a curiosity, electronic shifting their cost, with eTAP-equipped cycles starting conventional (for Trek) all-carbon fork shaped is now widely reckoned to be superior in at around £4.5k and Ultegra Di2 a more for resilience. The current version has a operation, reliability, and prestige to the affordable £3k or so. Both groupsets can be de-coupler device in the head tube as well as various mechanical shifting systems offered found for sale at a grand or thereabouts and a new flex adjustment system at the rear. by the three main manufacturers. Having can be retro-fitted to an existing bike, making The de-coupler essentially allows the proven almost impervious to adverse riding the technology itself more accessible than relevant frame member – seat post or fork conditions, it is popular with cyclocross riders.
[Show full text]
SRAM RED Etap AXS™ EMBARGO FEB 06, 2019
NEW ROAD PRODUCT SRAM eTap AXS™ 02 SRAM RED eTap AXS™ EMBARGO FEB 06, 2019 9:00AM CENTRAL STANDARD TIME 4:00PM CENTRAL EUROPEAN TIME 03 SIMPLY BEYOND Today’s riders are more capable than ever. So we made a groupset that fit their needs. We focused on where road is going, not simply where it’s been. 04 Wider range and closer progression, eTAP so you’re always in the right gear. A quiet, secure and smooth ride, ™ whatever the terrain. AXS A system that does exactly what you want, when you want. Exploring new limits has never OFFERS been easier. SRAM eTap AXS™ – Simply Beyond. 05 MECHANICAL ADVANCEMENTS THAT WILL ELEVATE YOUR RIDE EXPERIENCE. 06 ELECTRONIC SRAM RED eTAP AXS ™ INNOVATIONS / EMBARGO: FEB 06, 2019 RETAIL: THAT TAKE ETAP® WIRELESS TO THE NEXT LEVEL. 07 POWER MEASUREMENT THAT’S MORE INTEGRATED THAN EVER. 08 YOURS, NOW 09 2x HRD 10 1x HRD 11 1x TRI HRD 12 MECHANICAL ADVANCEMENTS 13 SYSTEM ENGINEERING Completely new drivetrain system for electronic shifting One rear derailleur for all gearing configurations 14 X-RANGE™ Ideal gear ratios for today’s more capable bikes and riders GEARING Smoother gear progression Wider, more progressive Always in the right gear gear range to explore new limits. Ride faster, farther, easier 15 THE RIGHT GEARING TRADITIONAL TRADITIONAL TRADITIONAL X-RANGE™ GEARING X-RANGE™ GEARING X-RANGE™ GEARING CRANK 50/37 53/39 48/35 52/36 46/33 50/34 CASSETTE 10-26 11-25 10-28 11-28 10-33 11-32 X-Range™ crankset and cassette combinations shown are only suggestions—all cranksets are compatable with all cassettes 16 X-RANGE™ GEARING TRADITIONAL GEARING 53/39 X 11-25 Offers more range than X-RANGE™ GEARING 50/37 X 10-26 traditional gearing.
[Show full text]
Assembly Manual
ASSEMBLY MANUAL 2019 - Copyright © Cicli Pinarello SRL - C.F. e P.I. 05994100963 CONTENTS 1. SCOPE OF THIS ASSEMBLY MANUAL 3 2. GENERAL NOTES ABOUT ASSEMBLY 4 3. TOOLS AND TORQUE SPECS 5 4. HOUSING AND HOSE LENGTH RECOMMENDATION 6 5. RIM BRAKE: INSTALLATION AND HOUSING ROUTING 7 6. DISC BRAKE: INSTALLATION AND HOSE ROUTING 12 7. ELECTRONIC GROUPSET (DI2) INSTALLATION AND CABLE ROUTING 17 8. MECHANICAL GROUPSET INSTALLATION 22 9. INTEGRATED HANDLEBAR (TALON ULTRA) ROUTING (ELECTRONIC DI2) 25 10. INTEGRATED HANDLEBAR (TALON ULTRA) ROUTING (MECHANICAL) 29 11. BRAKE CABLE INSTALLATION (INTEGRATED HANDLEBAR) 35 12. HEADSET ADJUSTING 44 13. STEM AND BAR INSTALLATION AND ROUTING (FOUR CONFIGURATIONS) 48 14. FINAL CHECKS 51 CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia 2 C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com 1. SCOPE OF THIS ASSEMBLY MANUAL 1.1 This manual is intended as a guide for the assembly of the Dogma F12 and Dogma F12 Disk from a frame kit to a complete bike. 1.2 Due to the high degree of complexity of the Dogma F12 and Dogma F12 Disk this manual is intended for expert mechanics of Authorized Pinarello Dealers. 1.3 Please utilize Authorized Pinarello Dealers for assembly, service, repairs or maintenance performed on the Pinarello Dogma F12 and Dogma F12 Disk. 1.4 The following instructions for electronic groupsets are focused for Shimano Di2 wiring. Sram eTAP or Campagnolo EPS may be different from the given instruction.
[Show full text]
List of Bicycle Parts
List of bicycle parts Bicycle parts For other cycling related terms (besides parts) see Glossary of cycling. List of bicycle parts by alphabetic order: Axle: as in the generic definition, a rod that serves to attach a wheel to a bicycle and provides support for bearings on which the wheel rotates. Also sometimes used to describe suspension components, for example a swing arm pivot axle Bar ends: extensions at the end of straight handlebars to allow for multiple hand positions Bar plugs or end caps: plugs for the ends of handlebars Basket: cargo carrier Bearing: a device that facilitates rotation by reducing friction Bell: an audible device for warning pedestrians and other cyclists Belt-drive: alternative to chain-drive Bicycle brake cable: see Cable Bottle cage: a holder for a water bottle Bottom bracket: The bearing system that the pedals (and cranks) rotate around. Contains a spindle to which the crankset is attached and the bearings themselves. There is a bearing surface on the spindle, and on each of the cups that thread into the frame. The bottom bracket may be overhaulable (an adjustable bottom bracket) or not overhaulable (a cartridge bottom bracket). The bottom bracket fits inside the bottom bracket shell, which is part of the bicycle frame Brake: devices used to stop or slow down a bicycle. Rim brakes and disc brakes are operated by brake levers, which are mounted on the handlebars. Band brake is an alternative to rim brakes but can only be installed at the rear wheel. Coaster brakes are operated by pedaling backward Brake lever:
[Show full text]
Urgestalt Disc
Urgestalt Disc Owner's manual 402694 2017-02 Chip number Dealer Contents introduCtion Preface. 4 Lightweight.online. 4 Explanation.of.symbols. 4 Your.frame.kit. 5 Registration. 5 Scope of supply .. 6 teChniCal data Dimensions. 8 Limitations. 8 Tightening.torques. 9 safety Intended.use. 10 nglish In.your.own.interest. 10 e Fundamental.safety.precautions . 10 Assembly.&.maintenance. 10 On.the.road. 11 Transport.&.storage. 12 Disposal. 12 assembly Preparatory.work. 13 Mounting.dropout. 14 Installing.the.seat.post. 14 Shortening.the.steerer.tube. 15 Installing.the.fork/headset. 16 Routing.cables/hoses. 20 Routing.derailleur.cables. 20 Routing.brake.hose. 22 Electronic.gearshift. 23 Installing.the.wheels. 24 maintenanCe Before.every.ride. .25 Regular.maintenance. 26 Cleaning. 27 rules Liability. 28 Service . 29 Crash.replacement. 29 Fair.deal.promise. 29 3 introduCtion preface lightweight online Congratulations.and.thank.you.–.you.have.selected.a.Lightweight. Visit.www.lightweight.info.for.information.that.you.will.find. race.bike.frame.kit .. .interesting . Designed.in.Germany Accessories,.spare.parts.and.clothing.in.the.shop,.frequently.asked. This.manual.is.an.integral.component.of.your.Lightweight.product. questions.in.the.FaQs,.interesting.facts.in.News & press.and.much. and.it.provides.you.with.important.information.regarding.the.safe. more operation.of.your.Lightweight.race.bike.frame.kit We.look.forward.to.meeting.you.there! The.safety.of.our.customers.is.very.important.to.us .Please.read.this. manual.carefully.before.installing.your.frame.kit.or.riding.with.it.for. explanation of symbols the.first.time . You.will.encounter.the.following.symbols.and.references.in.this.
[Show full text]
Tech Data Groupsets
102 GROUPSETS TECH DATA 103 DISC Brake RIM Brake COMPONENT OPTIONS WEIGHT [g] WEIGHT REFERENCE COMPONENT OPTIONS WEIGHT [g] WEIGHT REFERENCE SUPER RECORD™ EPS™ rear derailleur - 198 cables included SUPER RECORD™ EPS™ rear derailleur - 198 cables included H11™ EPS™ Ergopower controls - 396 Pair (cables included) SUPER RECORD™ EPS™ Ergopower controls - 262 Pair (cables included) SUPER RECORD™ EPS™ front derailleur - 127 cables included SUPER RECORD™ EPS™ front derailleur - 127 cables included DTI™ EPS™ V3 Power Unit - 106 cables included DTI™ EPS™ V3 Power Unit - 106 cables included DTI™ EPS™ V3 Interface - 35 cables included DTI™ EPS™ V3 Interface - 35 cables included 170 mm, 172,5 mm, 175 mm 170 mm, 34-50 170 mm, 172,5 mm, 175 mm 170 mm, 34-50 H11™ crankset 628 SUPER RECORD™ crankset 603 39-53, 36-52, 34-50 (2 bearings assembled) 39-53, 36-52, 34-50 (2 bearings assembled) ITa: 70x (36x24 tpi) ITa: 70x (36x24 tpi) SUPER RECORD™ ULTRA-TORQUE™ threaded cups 43 BSa SUPER RECORD™ ULTRA-TORQUE™ threaded cups 43 BSa BSa: 68x (1,37”x24 tpi) BSa: 68x (1,37”x24 tpi) BB30: (68x42) mm BB30: (68x42) mm BB86: (86,5x41) mm BB86: (86,5x41) mm ULTRA-TORQUE™ press-fit cups PF30: (68x46) mm 40 BB86 ULTRA-TORQUE™ press-fit cups PF30: (68x46) mm 40 BB86 BB386: (86,5x46) mm BB386: (86,5x46) mm BB rIGHT: (79x46) mm BB rIGHT: (79x46) mm SUPER RECORD™ sprockets 11-23, 11-25, 11-27, 12-25, 12-27, 12-29 188 11-25 SUPER RECORD™ sprockets 11-23, 11-25, 11-27, 12-25, 12-27, 12-29 188 11-25 RECORD™ chain - 238 114 links RECORD™ chain - 238 114 links 160 mm Front rear
[Show full text]