DOCSLIB.ORG

U.S. EPA, Pesticide Product Label, HB 107-3 WEED and GRASS KILLER

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
U.S. EPA, Pesticide Product Label, HB 107-3 WEED and GRASS KILLER r I ! .. --'- ----------------- -- ._---_ _------ ACCEPTED t For Application by Professional Personnel JUN 161967 UNDER THI" f !:DEIlAL INSECTICIDE FUNGICIDE AND RODENTICIDE ACt FOR ECONOMIC FOlSON REQJS1EB­ F.D UNDER NOI~..lL-_£rSU81r:cr TO ATTACHED COMMt:IITS. WEED AND GRASS KILLER fOR CONTROLLING VEGETAnON ON RAILROAD RIGHTS-Of-WAY U.S.D.A. REG. NO. 1624·58 U.S. PATENT 3,227,541 Adive Ingredients: Anhydrous Sodium Metaborate (Na2B20.) • e • e 10.0~ Sodium Chlorate (MaCIO]) ••••••••• • • • 7.0"/0 '. Bromaa1 (5-bromo-3-se,-butyl-6-methyluradl) • • • 0.3"/0 Inert Ingredients. • • • • • • • • • • • • • • • • • 82.7"/0 , DIRECTIONS FOR USE HIBOR weed and grass killer should be applied without further dilution. Apply at the rate of 100 to 200 gallons per acre (Approximately 1fe to 1/2 gallon per 100 sq. ft.) using a pressure sprayer. For control of perennial grasses and perel1Jllal'braad-leqved we~ the heavier rates are suggested. For control of annual weeds, apply HIBOR as a contact spray when plants are young, thoroughly weHlng all parts of the f,lant, particularly the growing tips. for control of perennial grasses, such as Johnson grass, late summer or fall applications are recommended. Do not apply HIBOR sprays on desirable plants or over the root area of desirable trees or shrubs. Avoid spray drift to susceptible plants. CAUTION KEEP OUT OF REACH OF CHILDREN Avoid contamination of feed and foodstuHs. Keep livestock and other animals oH treated areas. Do not contaminate domestic or Irrigation water, or waters used by fish and wildlife. Avoid contact with skin, eyes and dothlng. In C.O\C of contad, flush with plenty of water; for oyes, get medical aHentlon. Do not store near fertilizers, seeds, insectiddc .. or ""'.. d..... , NOTICE No retponslblllty It auumed by manufacturer ar teller for unprodualvlty of the soil, Injury to pl.:!nt lif., or other r.~­ suits of the use of this material whether or not used or applied In accordance with dlrectlont. Becaute of the many varying conditions aHedlng use and application, such as location, seasonal weather, 5011 composition and type of veg­ etatlan, manufacturer makes no representation or warranty with respect to results or eHecls of such use whether or not used or applied In accordance with directions herein contained. Neither manufacturer nor seller makes, and their employees and agents are not permlHed to make, any representations or warranties, express or Implied by law, ,,"ot specifically set forth on the label. Complete elimination of weed, Is not guaranteed. The buyer accepts this ma­ terial subled to these term. and assume. all risk of usage and handling. It Is advisable to consult state extension service or agricultural experimental station weed specialists an specific problems. UNITED STATES BORAX & CHEMICAL CORPORATION 3071 WII.~'" "'lev"'" San.? 22 ___ • .. • • M4 , on PC . L Chk'·· ..... • , I ! • • 20 MULE TEAM® ® ;-AC C t-p:'r c ~~: , GRANULAR ; I . , u_ S. Patents 2,700,604 & 3,22; 41 I Other Patents Pending ~ .~. ~ "l ,,': \.. • - - ------ - _.- - -- --- NONSELECTIVE WEED AND GRASS APPLY DRY OR AS WATER SPRAY For General Vegetation and Perennial Grasse~ on Noncropped Land and Industrial Sites Where Long Residual Control of Seedlings is Desired. -------------------------------ACTIVE INGREDIENTS: Sodium Metaborate Tetrahydrate (Na2B20.·4H,O). 66...5 \. Boron Trioxide (8,03) equlvc!enL. __ _ 22.6'X Sodium Chlorat. (Nae 103) . ... ... .... _ __ 8romacll (5.bromo-3-I4K-butyt~methy!l.i. ceil). INERT INGREDIENTSt .... .. ' .. ~------------------------~~------~.-------~------------- USDA REG. NO. 162-4·79 .
Load more

Recommended publications
  • Safety Data Sheet
    SAFETY DATA SHEET According to JIS Z 7253:2019 Revision Date 18-Aug-2020 Version 3.02 Section 1: PRODUCT AND COMPANY IDENTIFICATION Product name Sodium Metaborate Tetrahydrate Product code 198-02395 Manufacturer FUJIFILM Wako Pure Chemical Corporation 1-2 Doshomachi 3-Chome Chuo-ku, Osaka 540-8605, Japan Phone: +81-6-6203-3741 Fax: +81-6-6203-5964 Supplier FUJIFILM Wako Pure Chemical Corporation 1-2 Doshomachi 3-Chome, Chuo-ku, Osaka 540-8605, Japan Phone: +81-6-6203-3741 Fax: +81-6-6203-2029 Emergency telephone number +81-6-6203-3741 / +81-3-3270-8571 Recommended uses and For research purposes restrictions on use Section 2: HAZARDS IDENTIFICATION GHS classification Classification of the substance or mixture Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Specific target organ toxicity (single exposure) Category 3 Category 3 Respiratory tract irritation Pictograms Signal word Warning Hazard statements H315 - Causes skin irritation H319 - Causes serious eye irritation H335 - May cause respiratory irritation Precautionary statements-(Prevention) • Wash face, hands and any exposed skin thoroughly after handling • Wear protective gloves/protective clothing/eye protection/face protection • Avoid breathing dust/fume/gas/mist/vapors/spray • Use only outdoors or in a well-ventilated area Precautionary statements-(Response) • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. • If eye irritation persists: Get medical advice/attention. • IF ON SKIN: Wash with plenty of soap and water • If skin irritation occurs: Get medical advice/attention • Take off contaminated clothing and wash before reuse __________________________________________________________________________________________ Page 1 / 6 W01W0119-0239 JGHEEN Sodium Metaborate Tetrahydrate Revision Date 18-Aug-2020 __________________________________________________________________________________________ • IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
    [Show full text]
  • Physicochemical Properties of Sodium Metaborate
    ELECTROCHEMICAL RECYCLING OF SODIUM BOROHYDRTDE FOR HYDROGEN STORAGE: PHYSICOCHEMICAL PROPERTIES OF SODIUM METABORATE SOLUTIONS. by Caroline R. Cloutier B. A. Sc., The University of Ottawa, 1999 A THESIS SUBMITTED IN PARTIAL FULFILMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF APPLIED SCIENCE m THE FACULTY OF GRADUATE STUDIES (Materials Engineering) THE UNIVERSITY OF BRITISH COLUMBIA July 2006 © Caroline R. Cloutier, 2006 ABSTRACT The large-scale adoption of a "hydrogen economy" is hindered by the lack of a practical storage method and concerns associated with its safe handling. Chemical hydrides have the potential to address these concerns. Sodium borohydride (sodium tetrahydroborate, NaBH4), is the most attractive chemical hydride for H2 generation and storage in automotive fuel cell applications but recycling from sodium metaborate (NaB02) is difficult and costly. An electrochemical regeneration process could represent an economically feasible and environmentally friendly solution. In this thesis, the properties of diluted NaB02 aqueous solutions and concentrated NaB02 alkaline aqueous solutions that are necessary for the development of electrochemical recycling methods have been studied. The conductivity and viscosity of dilute aqueous solutions of NaB02 were measured as a function of concentration at 25°C. Also, the solubility, pH, density, conductivity and viscosity of the filtrate of saturated aqueous NaB02 solutions containing varying weight percentages (1, 2, 3, 5, 7.5 and 10 wt%) of alkali hydroxides (NaOH, KOH and LiOH) were evaluated at 25°C. Selected experiments were repeated at 50 and 75°C to investigate the effect of temperature on the NaB02 alkaline aqueous solution solubility and physicochemical properties. Preliminary experiments to investigate the effect of glycine (C2H5N02), the smallest amino acid, on the solubility and physicochemical properties of NaB02 alkaline aqueous solutions were conducted at 25°C.
    [Show full text]
  • Buffer Replacement Considerations
    Buffer Replacement Considerations John Butler NEI Buffer Replacement Replacement of buffers considered as one means to minimize precipitant impact of strainer headloss Buffer Candidates 1. Liquid Systems- a) Sodium Hydroxide (NaOH) b) NaOH at reduced concentration (2.5% vice current 10%) c) Sodium Metaborate (NaMB) 2. Granular Systems- a) Trisodium Phosphate crystalline b) Sodium Tetraborate (NaTB) crystalline Lead Replacement Strategies Three primary replacement strategies – Replace TSP with NaTB – Replace NaOH with NaTB – Replace NaOH with TSP All three buffer materials are currently installed and in use at PWRs Role of Buffers in Design Bases Radiological Dose Control – pH > 7 Inhibition of Stress Corrosion Cracking of Austenitic stainless steel – Long term environmental control – pH > 7 Functional Considerations System Design Radiological Consequences Equipment Environmental Qualification Hydrogen Generation Corrosion Control Plant Operation Plant Documentation Evaluation of Alternatives WCAP-16596-NP Identify buffer alternative and TSP, NaOH, NaTB delivery method Liquid, granular Evaluate impact Chemical Precipitant Model on chemical precipitant Containment Inventory formation pH adjustment to > 7 delivery and distribution Design/Functional corrosion inhibition Evaluation boric acid solubility environmental qualification profile Hydrogen generation Analyses to Support Buffer Replacement LAR Buffer provides pH adjustment to > 7 Comparable or better delivery and distribution Comparable or better corrosion inhibition characteristics
    [Show full text]
  • Sodium Metaborate, Tetrahydrate
    SAFETY DATA SHEET Preparation Date: 3/24/2015 Revision Date: Not Applicable Revision Number: Not Applicable Product identifier Product code: S2605 Product Name: SODIUM METABORATE, TETRAHYDRATE Other means of identification Synonyms: Boric acid, monosodium salt, tetrahydrate CAS #: 10555-76-7 RTECS # ED4640000 (for Sodium metaborate CAS no. 7775-19-1) CI#: Not available Recommended use of the chemical and restrictions on use Recommended use: Fungicide. Insecticide. Uses advised against No information available Supplier: Spectrum Chemicals and Laboratory Products, Inc. 14422 South San Pedro St. Gardena, CA 90248 (310) 516-8000 Order Online At: https://www.spectrumchemical.com Emergency telephone number Chemtrec 1-800-424-9300 Contact Person: Martin LaBenz (West Coast) Contact Person: Ibad Tirmiz (East Coast) 2. HAZARDS IDENTIFICATION Classification This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Reproductive toxicity Category 2 Label elements Product code: S2605 Product name: SODIUM 1 / 11 METABORATE, TETRAHYDRATE Warning Hazard statements Causes skin irritation Causes serious eye irritation Suspected of damaging fertility or the unborn child Hazards not otherwise classified (HNOC) Not Applicable Other hazards Not available Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Wear eye/face protection Wear protective gloves Precautionary Statements - Response IF exposed or concerned: Get medical advice/attention Specific treatment (see .? on this label) IF IN EYES: Rinse cautiously with water for several minutes.
    [Show full text]
  • A Recycling Hydrogen Supply System of Nabh4 Based on a Facile Regeneration Process: a Review
    inorganics Review A Recycling Hydrogen Supply System of NaBH4 Based on a Facile Regeneration Process: A Review Liuzhang Ouyang 1,2,3, Hao Zhong 1,2, Hai-Wen Li 4,* ID and Min Zhu 1,2,* 1 School of Materials Science and Engineering, Key Laboratory of Advanced Energy Storage Materials of Guangdong Province, South China University of Technology, Guangzhou 510641, China; [email protected] (L.O.); [email protected] (H.Z.) 2 China-Australia Joint Laboratory for Energy & Environmental Materials, South China University of Technology, Guangzhou 510641, China 3 Key Laboratory for Fuel Cell Technology in Guangdong Province, Guangzhou 510641, China 4 Kyushu University Platform of Inter/Transdisciplinary Energy Research, International Research Center for Hydrogen Energy and International Institute for Carbon-Neutral Energy, Kyushu University, Fukuoka 819-0395, Japan * Correspondence: [email protected] (H.-W.L.); [email protected] (M.Z.) Received: 24 October 2017; Accepted: 5 January 2018; Published: 6 January 2018 Abstract: NaBH4 hydrolysis can generate pure hydrogen on demand at room temperature, but suffers from the difficult regeneration for practical application. In this work, we overview the state-of-the-art progress on the regeneration of NaBH4 from anhydrous or hydrated NaBO2 that is a byproduct of NaBH4 hydrolysis. The anhydrous NaBO2 can be regenerated effectively by MgH2, whereas the production of MgH2 from Mg requires high temperature to overcome the sluggish hydrogenation kinetics. Compared to that of anhydrous NaBO2, using the direct hydrolysis byproduct of hydrated NaBO2 as the starting material for regeneration exhibits significant advantages, i.e., omission of the high-temperature drying process to produce anhydrous NaBO2 and the water included can react with chemicals like Mg or Mg2Si to provide hydrogen.
    [Show full text]
  • Hydrogenation of 2-Methylnaphthalene in a Trickle Bed Reactor Over Bifunctional Nickel Catalysts
    The University of Maine DigitalCommons@UMaine Electronic Theses and Dissertations Fogler Library Fall 12-2020 Hydrogenation of 2-methylnaphthalene in a Trickle Bed Reactor Over Bifunctional Nickel Catalysts Matthew J. Kline University of Maine, [email protected] Follow this and additional works at: https://digitalcommons.library.umaine.edu/etd Part of the Catalysis and Reaction Engineering Commons, and the Petroleum Engineering Commons Recommended Citation Kline, Matthew J., "Hydrogenation of 2-methylnaphthalene in a Trickle Bed Reactor Over Bifunctional Nickel Catalysts" (2020). Electronic Theses and Dissertations. 3284. https://digitalcommons.library.umaine.edu/etd/3284 This Open-Access Thesis is brought to you for free and open access by DigitalCommons@UMaine. It has been accepted for inclusion in Electronic Theses and Dissertations by an authorized administrator of DigitalCommons@UMaine. For more information, please contact [email protected]. HYDROGENATION OF 2-METHYLNAPHTHALENE IN A TRICKLE BED REACTOR OVER BIFUNCTIONAL NICKEL CATALYSTS By Matthew J. Kline B.S. Seton Hill University, 2018 A THESIS Submitted in Partial Fulfillment of the Requirements For the Degree of Master oF Science (in Chemical Engineering) The Graduate School The University of Maine December 2020 Advisory Committee: M. Clayton Wheeler, Professor of Chemical Engineering, Advisor Thomas J. Schwartz, Assistant ProFessor oF Chemical Engineering William J. DeSisto, ProFessor oF Chemical Engineering Brian G. Frederick, ProFessor oF Chemistry
    [Show full text]
  • Process for Regeneration of Sodium Borate to Sodium Borohydride for Use As a Hydrogen Storage Source, Excerpt from DOE Hydrogen
    IV.B CheMicaL SToraGE IV.B.1 Process for Regeneration of Sodium Borate to Sodium Borohydride for Use as a Hydrogen Storage Source (K) System Life-Cycle Assessments Ying Wu (Primary Contact), Michael T. Kelly, (R) Regeneration Processes Jeffrey V. Ortega, and Oscar A. Moreno (S) By-Product/Spent Material Removal Millennium Cell Inc. 1 Industrial Way West, Building E Eatontown, NJ 07724 Technical Targets Phone: (732) 544-5718; Fax: (732) 542-2846 E-mail: [email protected] Current manufacturing practice and the accepted market price of NaBH4 give rise to an equivalent DOE Technology Development Manager: hydrogen cost in the range of $188-259/kg H2. Grace Ordaz Regeneration and spent material management are key Phone: (202) 586-8350; Fax: (202) 586-9811 aspects of the electrochemical syntheses. Efficiency E-mail: [email protected] is being evaluated through reaction engineering assessment. Several interim cost targets have been set, DOE Project Officer: Jim Alkire leading to the final target of meeting DOE’s $2-3/kg 2H Phone: (303) 275-4795; Fax: (303) 275-4753 goal. E-mail: [email protected] • Interim Target 1: Improved Na Electrolysis Yields Contract Number: DE-FC36-04GO14008 $50/kg H2 via $10/kg NaBH4 Subcontractors: • Interim Target 2: Incorporation of Waste Material Air Products and Chemicals Inc., Allentown, PA Recycling: $2/kg NaBH4 and $10/kg H2 Princeton University, Princeton, NJ • Interim Target 3: One-Pot Electrochemical Method: $1/kg NaBH and $5/kg H Start Date: November 1, 2003 4 2 Projected End Date: September 30, 2007 Accomplishments • Demonstrated the feasibility of reducing NaBH4 Objectives manufacturing cost and projected cost reduction by a factor of three through a more efficient and • The primary objective is to develop low-cost less costly Na production process.
    [Show full text]
  • Interagency Committee on Chemical Management
    DECEMBER 14, 2018 INTERAGENCY COMMITTEE ON CHEMICAL MANAGEMENT EXECUTIVE ORDER NO. 13-17 REPORT TO THE GOVERNOR WALKE, PETER Table of Contents Executive Summary ...................................................................................................................... 2 I. Introduction .......................................................................................................................... 3 II. Recommended Statutory Amendments or Regulatory Changes to Existing Recordkeeping and Reporting Requirements that are Required to Facilitate Assessment of Risks to Human Health and the Environment Posed by Chemical Use in the State ............................................................................................................................ 5 III. Summary of Chemical Use in the State Based on Reported Chemical Inventories....... 8 IV. Summary of Identified Risks to Human Health and the Environment from Reported Chemical Inventories ........................................................................................................... 9 V. Summary of any change under Federal Statute or Rule affecting the Regulation of Chemicals in the State ....................................................................................................... 12 VI. Recommended Legislative or Regulatory Action to Reduce Risks to Human Health and the Environment from Regulated and Unregulated Chemicals of Emerging Concern ..............................................................................................................................
    [Show full text]
  • Sodium Chlorate Crops
    Sodium Chlorate Crops Identification Chemical Name(s): CAS Number: Sodium chlorate 7775-09-9 Other Names: Other Codes: soda chlorate; chlorate of soda; chloric acid, sodium salt; DOT number: UN 1495/ UN 2428 sodium chlorate, aqueous solution NAERG Code: 140 PC Code: 073301 Trade names: Chlorax; De-Fol-Ate, Drop-Leaf; Fall; Harvest-Aid; Tumbleaf Summary Recommendation Synthetic / Allowed or Suggested Non-Synthetic: Prohibited: Annotation: Synthetic Prohibit Characterization Composition: NaClO3. O Na– O--Cl O Sodium chlorate belongs to the class of inorganic herbicides (containing no carbon), and was developed before the modern era of organic herbicides such as 2-4-D, which began in the mid 1940s. Others in this category include aresenicals, borates, cyannates, and ammoniuim sulfamate and are still in use today (Klingman, Meister). Properties: Sodium chlorate is a white, odorless, crystalline solid that looks like common table salt (sodium chloride) and is water soluble. It is a strong oxidant, not combustible but reacts violently with combustible and reducing materials. There is a risk of fire and explosion in dry mixtures with other substances, especially organic materials, i.e., other herbicides, sulphur, peat, powdered metals, strong acids, etc. How Made: Sodium chlorate is rapidly produced in solution form by the electrolysis of sodium chloride brine in a diaphragm-less chlor-alkali cell (Kent, Kirk-Othmer). The overall reaction is : NaCl + 3 H2O + 6F (faradays) NaClO3 + 3H2 This process is currently efficient at the rate of over 90% and involves power consumption of 4500- 5800 kWh /metic ton of sodium chlorate produced. In 1990, total North American sodium chlorate capacity was 1.1 million tons/year, with most production in Canada because of lower energy costs.
    [Show full text]
  • MSDS Board Defense
    Material Safety Data Sheet BOARD DEFENSE (Insecticide, Termiticide and Fungicide) SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Chemical Name BOARD DEFENSE Manufacturer InCide Technologies st Chemical Formula Na2B8O134H2O 50 N. 41 Avenue Chemical DiSodium Octaborate Phoenix, AZ 85009 Name/Synonyms Tetrahydrate Chemical Family Inorganic Borates EMERGENCY PHONE NUMBERS CAS Registry No. 12280-03-4 CHEMTREC 800-424-9300 TSCA Inventory No. 12008-41-2 (anhydrous INCIDE 602-233-0756 form) TECHNOLOGIES EPA Pesticide Reg. No. 44757-20 Effective date January 1, 2013 SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS OSHA HAZARDS This product contains greater than 99 percent (%) Disodium Octaborate Tetrahydrate (Na2B8O13•4H2O) CAS No. 12280-03-4. Disodium Octaborate Tetrahydrate is hazardous under the OSHA Hazard Communication Standard based on animal chronic toxicity studies of similar inorganic borate chemicals. SECTION 3 - HAZARD IDENTIFICATION EMERGENCY OVERVIEW Disodium Octaborate Tetrahydrate is a white, odorless, powdered substance that is not flammable, combustible, or explosive, and it presents no unusual hazard if involved in a fire. Disodium Octaborate Tetrahydrate presents little or no hazard (to humans) and has low acute oral and even lower dermal toxicity. Care should be taken to minimize the amount of Disodium Octaborate Tetrahydrate released to the environment to avoid ecological effects. POTENTIAL ECOLOGICAL EFFECTS: Large amounts of Disodium Octaborate Tetrahydrate can be harmful to boron-sensitive plants and other ecological systems. POTENTIAL HEALTH EFFECTS Routes of Exposure: Inhalation is the most significant route of exposure in occupational and other settings. Dermal exposure is not usually a concern because Disodium Octaborate Tetrahydrate is not absorbed through intact skin. Inhalation: Occasional mild irritation of nose and throat may occur from inhalation of Disodium Octaborate Tetrahydrate dusts at levels greater than 10 mg/m3.
    [Show full text]
  • Use and Characteristics of Herbicides for Non-Crop Weed Control
    Use and Characteristics of Herbicides for Non-crop Weed Control PENN STATE Department of Horticulture - College of Agricultural Sciences Uses and Characteristics of Herbicides for Non-crop Weed Control Prepared by: Art Gover Department of Horticulture The Pennsylvania State University To the User of this Publication This document provides information about herbicides and their uses, primarily for use as a study guide for applicators seeking certification in Pennsylvania Categories 10 - Rights-of-Way, or 14 - Industrial Weed Control. This document does not provide instructions or directions for use. Directions for use for any pesticide product are contained only in the label. Do not use any pesticide without carefully reading the label. If information in this document is in conflict with the information in a product's label, then this document is in error, and the incorrect information must be disregarded (and hopefully brought to the attention of the author). To the best of the author's knowledge, the information in this document is current as of May, 2000. Although the intent is for this document to be exhaustive, there are surely products that have been omitted through ignorance - not intent. Inclusion or omission of a product in this document does not constitute a recommendation, or lack of a recommendation regarding the use of that product. Table of Contents Introduction .................................................................................................................................................1 Integrated Pest
    [Show full text]
  • Universal Cooperatives
    MATERIAL SAFETY DATA SHEET Universal Crop Protection Alliance LLC In Case of Emergency, Call: 1300 Corporate Center Curve 24 Hour Emergency Number Eagan, MN 55121 CHEMTREC: 800-424-9300 Medical Emergency Contact: 800-228-5635 Ext. 138 1. CHEMICAL IDENTIFICATION Product Name: Pramitol 5PS Pelleted Herbicide Product No.: EPA Signal Word: Warning EPA Reg. Number: 66222-23-72693 Active Ingredient (%): CAS No. Simazine (0.76% CAS No. 122-34-9 Sodium Chlorate (39.8%) CAS No. 7775-09-9 Sodium Metaborate (40%) CAS No. 1303-96-4 Chemical Name: Chemical Class: 2. COMPOSITION/INFORMATION ON INGREDIENTS OSHA ACGIH NTP/IARC/OSHA Material PEL T LV Other Carcinog en_________ Prometon (5%) Not established Not Established(NE) NE No Simazine (0.76%) NE NE NE No Sodium Chlorate (39.8%) NE NE 10mg/cu. m No (total dust)* Sodium Metaborate (40%) 10mg/cu m 5 mg/cu m NE No • Recommended by manufacturer 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW : This product is a solid material. White pellets. Odorless. This product is a mild irritant and is slightly toxic. Active ingredient in this product can react with other materials to cause fire or explosive mixtures. In this formulation the active ingredients are neutralized. Pot ential Health Effects : Eye : Exposure may cause substantial but temporary eye irritation. Sk in : Non-irritating Ingestion : If swallowed, mucous membrane might be damaged, resulting in breathing difficulty, abdominal pain, nausea, vomiting, gastritis, weakness, headache or diarrhea. Inhalation: Prolonged inhalation exposure may cause raspiratory tract irritation. Physical Properties Appearance: White pellets Odor: Odorless 4. FIRST AID MEASURES If poisoning is suspected, immediately contact a physician, the nearest hospital, or the nearest Poison Control Center.
    [Show full text]