DOCSLIB.ORG

Avalon Aircraft Auction Spare Parts Guide Catalogue of Entries Ex-Military Vehicles

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Avalon Aircraft Auction Spare Parts Guide Catalogue of Entries Ex-Military Vehicles AVALON AIRCRAFT AUCTION SPARE PARTS GUIDE CATALOGUE OF ENTRIES EX-MILITARY VEHICLES AUSTRALIAN FRONTLINE MACHINERY 23 Tattersall Road, Kings Park, NSW 2148 T: 02 8796 1800 F: 02 8795 0465 E: [email protected] www.australianfrontlinemachinery.com.au 21/02/2021 To All Prospective Buyers of PC-9/A Pilatus Aircraft and Aircraft Parts Thereof RE: SPECIAL CONDITIONS PERTAINING TO SALE OF PC-9/A AIRCRAFT and AIRCRAFT PARTS Australian National Disposals (No 2) Pty Limited (AND2PL), the Commonwealth and Pickles Auctions Pty Ltd (together the Delegate/s) will not be providing support to any purchasers of ex-Defence PC-9/A Pilatus aircraft and any aircraft spare parts. All aircraft and aircraft spare parts will be sold by AND2PL on an as is, where is, basis and the purchaser agrees that it is, to undertake their own due diligence prior to making any offer. The Delegates will not warrant or guarantee any aircraft or aircraft spare parts listed for sale, general inventory or information provided as part of the sale. If Federal Aviation Administration (FAA), Civil Administration Safety Authority (CASA) or other certification is required, the purchasers will be solely responsible for obtaining certification independently, and without assistance from the Commonwealth, (except for the provision of Commonwealth’s Computer Aided Maintenance Management Version 2 (CAMM2) data for the aircraft) or AND2PL or Pickles. AND2PL will provide the purchaser with the Commonwealth’s CAMM2 maintenance history data for all PC-9/A Pilatus aircraft and aircraft spare parts (as available) prior to the auction period. It is to be noted that no delegate will warrant or guarantee the maintenance history data provided or confirm its completeness. The PC-9/A Pilatus aircraft, and aircraft spare parts thereof and other general inventory may be subject to Australian export controls and/or international import controls in addition to any other international governmental approvals or certifications that may be applicable to the country where the aircraft, aircraft spare part or general inventory is to be registered. As such, owners are required to independently identify and adhere to all applicable compliance matters that relate to the purchase and ultimate registration of the aircraft. Should you be unable to obtain any of the required approvals or decide to withdraw your offer, no refund is available for any deposit paid or expenses incurred in undertaking your enquiries. You must make your offer with the understanding that these matters contained here and with the terms of sale are solely the responsibility of the purchaser. Yours sincerely, Luke Parker Chief Executive Officer Australian National Disposals No.2 Pty Limited trading as Australian Frontline Machinery ABN 47 616 208 292 Buyer Information Auction closing times Lots Ends date Lots Ends date 001-050 Thursday 25 March at 12pm AEDT 501-550 Friday 26 March at 12pm AEDT 051-100 Thursday 25 March at 1pm AEDT 551-600 Friday 26 March at 1pm AEDT 101-150 Thursday 25 March at 2pm AEDT 601-650 Friday 26 March at 2pm AEDT 151-200 Thursday 25 March at 3pm AEDT 651-750 Friday 26 March at 3pm AEDT 201-250 Thursday 25 March at 4pm AEDT 751-850 Friday 26 March at 4pm AEDT 251-300 Thursday 25 March at 5pm AEDT 851-950 Friday 26 March at 5pm AEDT 301-350 Thursday 25 March at 6pm AEDT 951-1050 Friday 26 March at 6pm AEDT 351-400 Thursday 25 March at 7pm AEDT 1051-1150 Friday 26 March at 7pm AEDT 401-450 Thursday 25 March at 8pm AEDT 1151-1250 Friday 26 March at 8pm AEDT 451-500 Thursday 25 March at 9pm AEDT 1251-1353 Friday 26 March at 9pm AEDT How to bid in a PicklesONLINE auction 1. Search for an item you want to bid on. 2. Register with MyPickles for a free account before you register to bid in an online auction. 3. Log in to MyPickles to register your bid. If you’re too busy to bid, set a maximum bid and let Pickles do your bidding for you. 4. If you are the highest bidder, a deposit will be automatically taken from your verified credit card. Pickles will contact you to organise full payment. Fees A buyer’s premium fee of 6.6% applies to the purchase of all aircraft. All fees are GST inclusive. All sales and fees are in AUD. Contact Auctions Enquiries: Richard White Aircraft Valuations: Gavin Dempsey [email protected] [email protected] +61 420 973 216 +61 418 816 173 Pilatus LOT NO PC-9/A DESCRIPTION Aircraft Parts (Lots 001-050) Ends: Thursday 25 March at 12pm AEDT LOT NO DESCRIPTION AFM0001 - Pratt & Whitney Canada PT6A-62 PT6 Gas Turbine Engine NSN: 2840-21-904-5232 Module Serial: GG 103212 1 Eng. Build Spec: 855 Eng Serial: PCE 103212 Hanger Floor Location: F3-B-P1 AFM0002 - Pratt & Whitney Canada PT6A-62 PT6 Gas Turbine Engine Serviceable Part No: 3035300 2 Module Serial: GG 103131 Eng. Build Spec: 855 Eng Serial: PCE 103131 Hanger Floor Location: F3-B-P2 AFM0003 - Pratt & Whitney Canada PT6A-62 PT6 Gas Turbine Engine NSN: 2840-21-904-5232 Module Serial: GG 103148 3 Eng. Build Spec: 855 Eng Serial: PCE 103148 Hanger Floor Location: F3-B-P3 AFM0004 - Pratt & Whitney Canada PT6-A-62 PT6 Generator Module Incomplete Module Serial: GG103136 4 Eng Build Spec: 641 Eng Serial: PCE 103136 Hanger Floor Location: F2-E-P8 AFM0005 - Case Assy Gas Generator PT6-A Incomplete Part No: 3038138 5 Previous Vendor Certification: 103125 S/No: 4D947 Module: PP1 Hanger Floor Location: F3-A-P8 AFM0006 - Pratt & Whitney Canada PT6 Gas Turbine Engine Crate & Mount Size: 2070 x 710 x 760 mm(H) 6 Part No: Serial No: Hanger Floor Location: F3-B-P4 AFM0007 - Pratt & Whitney Canada PT6 Gas Turbine Engine Crate & Mount Size: 2070 x 710 x 760 mm(H) 7 NSN: 2840-21-904-5232 Hanger Floor Location: F3-C-P4 AFM0008 - Pratt & Whitney Canada PT6 Gas Turbine Engine Crate & Mount Size: 2070 x 710 x 760 mm(H) 8 Serial No: Hanger Floor Location: F3-C-P3 AFM0009 - Pratt & Whitney Canada PT6 Gas Turbine Engine Crate & Mount 9 Size: 2070 x 710 x 760 mm(H) Hanger Floor Location: F3-C-P2 AFM0010 - Pratt & Whitney Canada PT6 Gas Turbine Engine Crate & Mount 10 Size: 2070 x 710 x 760 mm(H) Hanger Floor Location: F3-C-P1 4 LOT NO DESCRIPTION AFM0011 - PC-9/A Aircraft Strut Shock MLG RH Unserviceable 11 Part No: 532.10.09.146 - S/No: 519 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P1 AFM0012 - Pilatus PC-9/A Aircraft FC91A Strut Shock MLG R/H Serviceable Part No: 532.10.09.076 - S/No: 540 12 NSN: 1620-66-148-0139 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P2 AFM0013 - Pilatus PC-9/A Aircraft Strut Shock NLG Unserviceable 13 Part No: 532.20.09.130 - S/No: 1007 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P3 AFM0014 - PC-9/A Aircraft Strut Shock MLG R/H With Actuator HYD MLG Serviceable Part No: 532.10.09.076 - S/No: FYH163013, S/No: 502 NSN: 0000-66-148-0139 Serviceable 14 Actuator: HYD MLG Part No: 4033 H2 Serial No: FYH163013 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P4 AFM0015 - Pilatus PC-9/A Aircraft Strut Shock MLG R/H Unserviceable Part No: 532.10.09.076 15 NSN: 0000-66-148-0139 S/No: 550 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P5 AFM0016 - Dunlop Aerospace Australia PC-9/A Aircraft Strut Shock NLG Part No: 532.20.09.130 - S/No: 551 16 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P6 AFM0017 - HdH Components PC-9/A Aircraft Strut Shock MLG L/H Unserviceable 17 Part No: 532.10.09.073 - S/No: 523 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P7 AFM0018 - Pilatus PC-9/A Aircraft Strut Shock NLG Serviceable Part No: 532.20.09.130 - S/No: 550 18 NSN: 660-66-118-3235 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P1 AFM0019 - PC-9/A Aircraft Strut Shock NLG Serviceable Part No: 532.20.09.130 - S/No: 541 19 NSN: 1620-66-118-3235 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P9 5 LOT NO DESCRIPTION AFM0020 - Pilatus PC-9/A Aircraft Strut Shock NLG Serviceable Part No: 532.20.09.130 - S/No: 538 20 NSN: 1620-66-118-3235 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P10 AFM0021 - Pilatus PC-9/A Aircraft Strut Shock MLG R/H Serviceable Part No: 532.10.09.076 - S/No: 525 21 NSN: 1620-66-148-0139 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P11 AFM0022 - Pilatus PC-9/A Aircraft Strut Shock MLG R/H Serviceable Part No: 532.10.09.076 - S/No: 1004 22 NSN: 1620-66-148-0139 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P12 AFM0023 - Pilatus PC-9/A Aircraft Strut Shock MLG R/H Serviceable 23 Part No: 532.10.09.076 - S/No: 542 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P13 AFM0024 - HdH Components PC-9/A Aircraft Strut Shock MLG R/H Unserviceable Part No: 532.10.09.075 - S/No: 505 24 NSN: 1620-66-148-0138 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger Floor Location: F3-D-P14 AFM0025 - PC-9/A Aircraft Strut Shock MLG R/H *No Make Plate* Unserviceable Part No: 532.10.09.076, Serial #: 1006 In Transport Container - Size: 1100 x 550 x 460 mm(H) With 25 Hex Bolts Part No: 532.10.09.160 Unserviceable Torque Links Part No: 114.35.07.040 Hanger Floor Location: F3-D-P15 AFM0026 - Pilatus PC-9/A Aircraft Strut Shock MLG RH Serviceable Part No: 532.20.09.130 - S/No: 511 26 NSN: 1620-66-118-3235 In Transport Container - Size: 1100 x 550 x 460 mm(H) Hanger
Load more

Recommended publications
  • Automated Generic Parameterized Design of Aircraft Fairing and Windshield
    Automated generic parameterized design of aircraft fairing and windshield Vijaykumar Govindharajan Aakash Narender Singh LIU-IEI-TEK-A-12/01271-SE Department of Management and Engineering Division of Flumes Department of Management and Engineering SE-581 83 Linköping, Sweden i ii Upphovsrätt Detta dokument hålls tillgängligt på Internet – eller dess framtida ersättare – under 25 år från publiceringsdatum under förutsättning att inga extraordinära omständigheter uppstår. Tillgång till dokumentet innebär tillstånd för var och en att läsa, ladda ner, skriva ut enstaka kopior för enskilt bruk och att använda det oförändrat för ickekommersiell forskning och för undervisning. Överföring av upphovsrätten vid en senare tidpunkt kan inte upphäva detta tillstånd. All annan användning av dokumentet kräver upphovsmannens medgivande. För att garantera äktheten, säkerheten och tillgängligheten finns lösningar av teknisk och administrativ art. Upphovsmannens ideella rätt innefattar rätt att bli nämnd som upphovsman i den omfattning som god sed kräver vid användning av dokumentet på ovan beskrivna sätt samt skydd mot att dokumentet ändras eller presenteras i sådan form eller i sådant sammanhang som är kränkande för upphovsmannens litterära eller konstnärliga anseende eller egenart. För ytterligare information om Linköping University Electronic Press se förlagets hemsida http://www.ep.liu.se/. Copyright The publishers will keep this document online on the Internet – or its possible replacement – for a period of 25 years starting from the date of publication barring exceptional circumstances. The online availability of the document implies permanent permission for anyone to read, to download, or to print out single copies for his/her own use and to use it unchanged for non-commercial research and educational purpose.
    [Show full text]
  • {NASA-CR-144882) YF-17/ADEN SYSTEM STUDY N79-27126 Final Report (Northrop Corp.) 160 P HC A08/MF A01 CSCL 01C Unclas G3/05 29348
    {NASA-CR-144882) YF-17/ADEN SYSTEM STUDY N79-27126 Final Report (Northrop Corp.) 160 p HC A08/MF A01 CSCL 01C Unclas G3/05 29348 NASA Contractor Report 144882 YF-17/ADEN System Study N. S. Gowadia, W. D. Bard, and W. H. Wooten July 1979 Prepared for NATIONAL AERONAUTICS AND SPACE ADMINISTRATION Dryden Flight Research Center Edwards, California 93523 r" q NASA Contractor Report 144882 YF-17/ADEN System Study N. S. Gowadia and W. D. Bard Northrop Corporation and W. H. Wooten General Electric Company NATIONAL AERONAUTICS AND SPACE ADMINISTRATION Scientific and Technical Information Office 1979 FOREWORD This report was produced by Northrop Aerosciences Research under NASA Contract No. NAS4-2499 to Dryden Flight Research Center with the guidance of NASA Technical Monitor Mr. F. Olinger. Volume 1, contained herein, represents a con­ solidation of considerable effort in a number of diverse disciplines. The authors would particularly like to acknowledge the contributions of Northrop personnel S. Radinsky, J.H. Wells, and R. Kubow of Structures Advanced Design, W.E. Nelson of Controls Research, and E. Skulick and D. Johnson of Pricing. Recognition is also due W.H. Wooten of General Electric Co, Cincinnati, Ohio for the extensive analysis and information provided with regard to YJi01 engine rmod!­ fication and program cost estimates. iii PRECED.ING PAGE BLANK NOT FILM_ ED SUMMARY The purpose of this study was to demonstrate the feasibility of incorporating the G. E. ADEN 2-D vectoring nozzle design on the YF-17 fighter in order to provide a manned flight demonstrator of 2-D nozzle technology.
    [Show full text]
  • FINAL PROGRAM #Aiaascitech
    4–8 JANUARY 2016 SAN DIEGO, CA The Largest Event for Aerospace Research, Development, and Technology FINAL PROGRAM www.aiaa-SciTech.org #aiaaSciTech 16-928 WHAT’S IMPOSSIBLE TODAY WON’T BE TOMORROW. AT LOCKHEED MARTIN, WE’RE ENGINEERING A BETTER TOMORROW. We are partnering with our customers to accelerate manufacturing innovation from the laboratory to production. We push the limits in additive manufacturing, advanced materials, digital manufacturing and next generation electronics. Whether it is solving a global crisis like the need for clean drinking water or travelling even deeper into space, advanced manufacturing is opening the doors to the next great human revolution. Learn more at lockheedmartin.com © 2014 LOCKHEED MARTIN CORPORATION VC377_164 Executive Steering Committee AIAA SciTech 2016 2O16 Welcome Welcome to the AIAA Science and Technology Forum and Exposition 2016 (AIAA SciTech 2016) – the world’s largest event for aerospace research, development, and technology. We are confident that you will come away from San Diego inspired and with the tools necessary to continue shaping the future of aerospace in new and exciting ways. From hearing preeminent industry thought leaders, to attending sessions where cutting- edge research will be unveiled, to interacting with peers – this will be a most fulfilling week! Our organizing committee has worked hard over the past year to ensure that our plenary sessions examine the most critical issues facing aerospace today, such as aerospace science and Richard George Lesieutre technology policy, lessons learned from a half century of aerospace innovation, resilient design, Christiansen The Pennsylvania and unmanned aerial systems. We will also focus on how AIAA and other stakeholders in State University Sierra Lobo, Inc.
    [Show full text]
  • Program Schedule
    Program Schedule SciTech 2016 January 03 - 08, 2016 The Program Report was last updated December 11, 2015 at 01:06 AM EST. To view the most recent meeting schedule online, visit https://aiaa-mst16.abstractcentral.com/planner.jsp Sunday, January 03, 2016 Time Session or Event Info 6:00 PM-7:30 PM, Seaport H, NW-01. Student Welcome Reception, Networking, Forum Event Monday, January 04, 2016 Time Session or Event Info 7:00 AM-7:30 AM, Session Room Foyers, NW-02. Monday Early Morning Networking Coffee Break, Networking, Forum Event 7:30 AM-8:00 AM, Session Rooms, SB-01. Monday Morning Speakers' Briefing, Speakers' Briefing, Forum Event 8:00 AM-9:00 AM, Seaport A-E, PLNRY-01. Monday Morning Plenary Panel Aerospace S&T Policy in the 2016 Political Arena , Plenary, Forum Event 9:00 AM-12:30 PM, Nautical, AA-01. Aeroacoustics - Jet Noise I, Technical Paper, 54th AIAA Aerospace Sciences Meeting, Chair: Krishan Ahuja, [email protected], Georgia Institute of Technology; Co-Chair: Douglas Nark, [email protected], NASA Langley Research Center Mean Velocity and Turbulence Measurements of Supersonic Jets with 9:00-9:30 AM Fluidic Inserts R.W. Powers; S. Hromisin; D.K. McLaughlin; P.J. Morris Numerical Investigation of Supersonic Jet Noise Suppression via 9:30-10:00 AM Downstream Microjet Fluidic Injection H. Pourhashem; I. Kalkhoran Fluctuating Pressure Gradients in Heated Supersonic Jets K.T. Lowe; 10:00-10:30 AM C.C. Nelson Extracting Near-Field Structures Related to Noise Production in High 10:30-11:00 AM Speed Jets P.
    [Show full text]
  • On the Use of Hydrogen As the Future Aviation Fuel Aerospace Engineering
    On the Use of Hydrogen as the Future Aviation Fuel Martim Novais Cálão Thesis to obtain the Master of Science Degree in Aerospace Engineering Supervisors: Prof. Fernando José Parracho Lau Dr. Frederico José Prata Rente Reis Afonso Examination Committee Chairperson: Prof. Filipe Szolnoky Ramos Pinto Cunha Supervisor: Prof. Fernando José Parracho Lau Member of the Committee: Prof. Afzal Suleman December 2018 ii Acknowledgments First and foremost, I would like to thank my supervisor at Airbus, Mr. Matthieu Meaux, for his guid- ance, expertise, trust and endless enthusiasm throughout the internship. I would also like to extend my gratitude to the Team-X for their experience and valuable advices, and the whole TPR Department of Airbus CTO in Toulouse for receiving me so well and making these six months such a pleasant experi- ence. I would also like to address a big thank you to my supervisors at Instituto Superior Tecnico,´ Prof. Fernando Lau and Dr. Frederico Afonso for their constant availability and support in preparing this thesis, and to Prof. Inesˆ Esteves Ribeiro for her insights in Life Cycle Assessment. Last but not least, for the unconditional support of my family, friends and girlfriend, Mafalda, through- out my academic life I can only be grateful. Thank you! iii iv Resumo A presente dissertac¸ao˜ foi realizada durante um estagio´ de seis meses no CTO da Airbus e descreve o projeto conceptual de aeronaves regionais com propulsao˜ a hidrogenio,´ atraves´ de uma plataforma de Otimizac¸ao˜ Multidisciplinar. A implementac¸ao,˜ na referida
    [Show full text]
  • NASA I Aeronautical Engineering Aer Ering Aeronautical Engineers Igineering Aeronautical Engirn Dal Engineering Aeronautical
    https://ntrs.nasa.gov/search.jsp?R=19780023098 2020-03-22T03:15:50+00:00Z Aeronautical NASA SP-7037 (98) Engineering July 1978 A Continuing NASA Bibliography with Indf: National Aeronautics and Space Administration >> I Aeronautical Engineering Aer D tt ering Aeronautical Engineers igineering Aeronautical Engirn Dal Engineering Aeronautical E nautical Engineering Aeronaut Aeronautical Engineering Aerc 3ring Aeronautical Engineering gineering Aeronautical Engine ftl Engineering Aeronautical E lautical Engineering Aeronaut! Aeronautical Engineering Aero ring Aeronautical Engineering NASA SP-7037(98) AERONAUTICAL ENGINEERING A Continuing Bibliography Supplement 98 A selection of annotated references to unclas- sified reports and journal articles that were introduced into the NASA scientific and tech- nical information system and announced in June 1978 m • Scientific and Technical Aerospace Reports (STAR) • Internationa/ Aerospace Abstracts (IAA) Scientific and Technical Information Branch 1978 National Aeronautics and Space Administration Washington, DC This Supplement is available from the National Technical Information Service (NTIS), Springfield. Virginia 22161. at the price code E02 ($475 domestic. $9 50 foreign) INTRODUCTION Under the terms of an mteragency agreement with the Federal Aviation Administration this publication has been prepared by the National Aeronautics and Space Administration for the joint use of both agencies and the scientific and technical community concerned with the field of aeronautical engineering The first
    [Show full text]
  • Ensinger Plastics Used in Aerospace Technology
    Stock shapes Plastics used in aerospace technology Content 4 Plastics in application 6 Product portfolio 7 Special materials 8 Application examples 10 Mechanical properties 12 Thermal properties 14 Electrical properties 15 Radiation resistance 16 Combustibility 17 Chemical resistance 18 Influence of processing on test results 19 Frequently asked questions 20 Quality management 22 Material standard values Ensinger®, TECA®, TECADUR®, TECAFLON®, TECAFORM®, TECAM®, TECAMID®, TECANAT®, TECANYL®, TECAPEEK®, TECAPET®, TECAPRO®, TECASINT®, TECASON®, TECAST®, TECATRON® are registered trade marks of Ensinger GmbH. TECATOR® is a registered trade mark of Ensinger Inc. VICTREX® is a registered trademark of Victrex Manufacturing Ltd. TECAPEEK is made with VICTREX® PEEK polymer. 2 Technical plastics contribute to making ap- The characteristics of our plastics products plications more efficient and competitive in fulfil the detailed requirements of material many industrial areas. The aerospace industry specifications of final customers and system places high demands on materials. The im- suppliers in the aerospace industry. Safety as- pressive properties of high-performance plas- pects and reduced energy consumption are of tics include their low weight and fire behaviour. primary importance. Benefits at a glance Ensinger quality in aerospace engineering ˌ Weight savings of up to 60 % compared As requested by our customers, we have to aluminium reduce energy consump- checked and qualified a large share of our ma- tions terials against required specifications.
    [Show full text]
  • Design of Parametric Winglets and Wing Tip Devices – a Conceptual Design Approach
    Linkoping studies in Science and Technology Design of Parametric Winglets and Wing tip devices – A Conceptual Design Approach Saravanan Rajendran Linkoping University Institute of Technology Department of Management and Engineering (IEI) SE-58183 Linköping, Sweden Upphovsrätt Detta dokument hålls tillgängligt på Internet – eller dess framtida ersättare –från publiceringsdatum under förutsättning att inga extraordinära omständigheter uppstår. Tillgång till dokumentet innebär tillstånd för var och en att läsa, ladda ner, skriva ut enstaka kopior för enskilt bruk och att använda det oförändrat för icke¬kommersiell forskning och för undervisning. Överföring av upphovsrätten vid en senare tidpunkt kan inte upphäva detta tillstånd. All annan användning av dokumentet kräver upphovsmannens medgivande. För att garantera äktheten, säkerheten och tillgängligheten finns lösningar av teknisk och administrativ art. Upphovsmannens ideella rätt innefattar rätt att bli nämnd som upphovsman i den omfattning som god sed kräver vid användning av dokumentet på ovan be skrivna sätt samt skydd mot att dokumentet ändras eller presenteras i sådan form eller i sådant sammanhang som är kränkande för upphovsmannens litterära eller konstnärliga anseende eller egenart. För ytterligare information om Linköping University Electronic Press se för lagets hemsida http://www.ep.liu.se/ Copyright The publishers will keep this document online on the Internet – or its possible replacement – from the date of publication barring exceptional circumstances. The online availability of the document implies permanent permission for anyone to read, to download, or to print out single copies for his/hers own use and to use it unchanged for non- commercial research and educational purpose. Subsequent transfers of copyright cannot revoke this permission. All other uses of the document are conditional upon the consent of the copyright owner.
    [Show full text]
  • 6.2020-2703 Publication Date 2020 Document Version Final Published Version Published in AIAA AVIATION 2020 FORUM
    Delft University of Technology A review of numerical and experimental studies of the anti-fairing Belligoli, Zeno; Dwight, Richard P.; Eitelberg, Georg; Srikumar, Sampath R.; Faleiros, David E.; Nesselrooij, Michiel van; Campenhout, Olaf van DOI 10.2514/6.2020-2703 Publication date 2020 Document Version Final published version Published in AIAA AVIATION 2020 FORUM Citation (APA) Belligoli, Z., Dwight, R. P., Eitelberg, G., Srikumar, S. R., Faleiros, D. E., Nesselrooij, M. V., & Campenhout, O. V. (2020). A review of numerical and experimental studies of the anti-fairing. In AIAA AVIATION 2020 FORUM (pp. 1-19). [AIAA 2020-2703] (AIAA AVIATION 2020 FORUM). American Institute of Aeronautics and Astronautics Inc. (AIAA). https://doi.org/10.2514/6.2020-2703 Important note To cite this publication, please use the final published version (if applicable). Please check the document version above. Copyright Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons. Takedown policy Please contact us and provide details if you believe this document breaches copyrights. We will remove access to the work immediately and investigate your claim. This work is downloaded from Delft University of Technology. For technical reasons the number of authors shown on this cover page is limited to a maximum of 10. AIAA AVIATION Forum 10.2514/6.2020-2703 June 15-19, 2020, VIRTUAL EVENT AIAA AVIATION 2020 FORUM A Review of Numerical and Experimental Studies of the Anti-Fairing Zeno Belligoli∗, Richard P.
    [Show full text]
  • \\Alice\Fluid\Flightgroup
    KNOWLEDGE-BASED INTEGRATED AIRCRAFT WINDSHIELD OPTIMIZATION Raghu Chaitanya Munjulury, Roland Gårdhagen, Patrick Berry and Petter Krus Linköping University, Linköping, Sweden Keywords: Aircraft Conceptual Design, Knowledge Based, Windshield, Optimization Abstract visibility pattern, frames, and windows encapsu- lated as templates, this information know-how Innovation is the key to new technology. At stored in templates known as knowledge tem- the "Division of Fluid and Mechatronic Sys- plate. Through automation scripts, by the use of tems, Linköping University", a framework for "Engineering Knowledge language", these tem- aircraft conceptual design is continuously devel- plates are called frequently until the desired re- oped. RAPID (Robust Aircraft Parametric Inter- sult is achieved. active Design) and Tango are knowledge-based The framework provides an edge to the con- aircraft conceptual design tools implemented in ceptual design phase. The design processes along CATIA R and Matlab R respectively. The work with knowledge based templates and automa- presented in this paper is a part of RAPID, ex- tion provide a fast graphical representation to plores the method, and proposes a framework for the user/designer. The end result of this frame- fuselage optimization with a parametric, reusable work can intensify the project processes and scale and automated windshield with a focus on the pi- back the time spent on redesigning the entire lot visibility for conceptual design. The geome- work or ever-changing present work. The user try is initially propagated from CAD (CATIA R ) need not be skillful with CAD (RAPID [1, 2]); to CFD (Ansys R ) using CADNexus. Initial opti- however, understanding the parameters and the mization implemented on a 2D geometry to find way to attain the specific style would be enough.
    [Show full text]
  • The Comparison of Composite Aircraft Field Repair Method (CAFRM) with Traditional Aircraft Repair Technologies
    Purdue University Purdue e-Pubs Open Access Dissertations Theses and Dissertations Fall 2013 The ompC arison of Composite Aircraft ieldF Repair Method (CAFRM) with Traditional Aircraft Repair Technologies Peng Hao Wang Purdue University Follow this and additional works at: https://docs.lib.purdue.edu/open_access_dissertations Part of the Aerospace Engineering Commons, and the Materials Science and Engineering Commons Recommended Citation Wang, Peng Hao, "The ompC arison of Composite Aircraft ieF ld Repair Method (CAFRM) with Traditional Aircraft Repair Technologies" (2013). Open Access Dissertations. 30. https://docs.lib.purdue.edu/open_access_dissertations/30 This document has been made available through Purdue e-Pubs, a service of the Purdue University Libraries. Please contact [email protected] for additional information. Graduate School ETD Form 9 (Revised 12/07) PURDUE UNIVERSITY GRADUATE SCHOOL Thesis/Dissertation Acceptance This is to certify that the thesis/dissertation prepared By Peng Hao Wang Entitled The Comparison of Composite Aircraft Field Repair Method (CAFRM) with Traditional Aircraft Repair Technologies Doctor of Philosophy For the degree of Is approved by the final examining committee: Ronald Sterkenburg Chair Richard O. Fanjoy Chien-Tsung Lu Jeffrey P. Youngblood To the best of my knowledge and as understood by the student in the Research Integrity and Copyright Disclaimer (Graduate School Form 20) , this thesis/dissertation adheres to the provisions of Purdue University’s “Policy on Integrity in Research” and the use
    [Show full text]
  • MIL-I-8671 Rev. C
    Downloaded from http://www.everyspec.com MI L-I-8671 C(AS) 20 May 1986 SUPERSEDING MIL-I-86718 (NEP) 1 SEPTEMBER 1961 MILITARY SPECIFICATION INSTALLATION OF DROPPABLE STORES AND ASSOCIATE RELEASE SYSTEMS This specification is approved for use within the Naval Air Systems Command, Department of the Navy, and is avai lable for use by al 1 Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 ~. This specification establishes the requirements and testing procedures for aircraft droppable store (see 6.4.8) instal lations and associated release systems. Excluded from this specification are the installation requirefients for aircraft pyrotechni~s (see MI L-I-8672) and forward firing rockets. 1.2 Classification. This specification shall apply to two types of aircraft installations: a. External installations: Installations in which the stores are completely or partially exposed to relative wind impingement during flight. b. Internal installations: Installations in which the stores are internally mounted within the aircraft. 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specific ations L standards, and handbooks. The fol 10wIng specifications, standards, and handbooks form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those 1isted in the issue of the Department of Oefense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Naval Air Engineering Center, Systems Engineering and Standardization Department (Code 93), Lakehurst, NJ 08733-5100, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
    [Show full text]