DOCSLIB.ORG

Boosting Digital Realities in Engineering and Manufacturing

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Boosting Digital Realities in Engineering and Manufacturing prostep ivip Symposium 2018 Directions prostep ivip Symposium 2018 on April 18/19, 2018 in Munich (Germany) Visit us at the MOC Veranstaltungscenter Munich! Program Commitee: Directions:Lilienthalallee 40 80939 München Germany Those responsible for the design of the overall program are: Ulrich Ahle Fiware Dr. Markus Fricke BMW Boosting Digital Realities in Armin Hoffacker Engineering and Manufacturing Robert Bosch Dr. Bernd Pätzold PROSTEP Dr. Alain Pfouga prostep ivip Visit• 5 -usminute at walk the from MOC the subway Munich station Kiefer ngarten (U6) Lilienthalallee• 12 minutes from downtown 40, by80939 subway Munich, Germany • Direct access to the A9 (Nürnberg/Salzburg) and A99 (Stuttgart) motorways Dr. Oliver Riedel • 20-minute drive by car from the Munich Airport Universität Stuttgart – ISW / Fraunhofer IAO Directions:• Underground parking for 1,500 vehicles on the premises Prof. Dr. Rainer Stark Fraunhofer IPK http://www.prostep-ivip-symposium.org/en/registration/venue 18/19 April 2018 MOC, Munich Germany prostep ivip Association Phone +49 6151 9287-336 Dolivostraße 11 Fax +49 6151 9287-326 64293 Darmstadt [email protected] Germany www.prostep-ivip-symposium.org Kindly supported by Registration: Send Invoice to: see left Participation Terms: Official Language: prostep ivip Symposium 2018 Company Upon receipt of your registration we will send you an invoice All lectures will be interpreted simultaneously 18/19 April 2018 as well as a confirmation. The participation fee includes (German/English, English/German). the participation at the evening event as well as lunch and Department be verages during the breaks. Company Street/P.O. Box Venue: For cancellation (only in written form) prior to or on Last Name/First Name 23.02.2018 a processing fee of 150 € (+ VAT) will be char- MOC Munich Zip Code/City ged. For cancellations after that date, a charge equivalent to Lilienthalallee 40 100 % of the total cost will be made. Substitute participants Department/Function 80939 Munich Order No. will be accepted at no extra charge. The organizer reserves Germany the right to make changes to the program Street/P.O.Box if necessary. Payment by: (please mark) Hotel Recommendation: Zip Code/City Please register duly as only a limited number of places is available. Invoice to above mentioned billing address You will find our hotel recommendations at Phone/Fax www.prostep-ivip-symposium.org Credit card Eurocard/Mastercard VISA Email American Express VAT-No. Card No. Valid thru Date/Signature (I accept the participation terms.) Card holder (if different) Please copy and fax your registration to: FAX +49 6151 9287-326 I intend to participate the event being held on the evening of 17.04.2018 in the BMW Group Classic building: Participation Fee: (please mark) yes no Please register duly as only a limited number of places are available. 1.500 € (+ VAT) non-member 850 € (+ VAT) prostep ivip Association member I intend to participate at the evening event of 18.04.2018: 850 € (+ VAT) University (non-member) yes no 400 € (+ VAT) University (prostep ivip Association member) Contact: Mrs. Shahrzad Abbasi, Tel: +49 6151 9287-454 [email protected] Please copy registration or download form at: http://www.prostep-ivip-symposium.org/en/registration/ prostep ivip Symposium 2018 Kindly supported by Program Day 1 Wednesday, 18 April 2018 09:00 Registration 10:00 Welcome 10:15 Keynote BMW Group 10:55 Keynote Kurt Bengel Spokesman of the Executive Board CENIT AG 11:35 Keynote Ulrich Ahle, Armin Hoffacker, Prof. Dr. Oliver Riedel, Prof. Dr. Rainer Stark Board prostep ivip e.V. 12:15 Lunch Break Agility Interoperability & IT Standards Aerospace & Digital Thread Workshops 13:45 Going agile with PLM standard software: Experience 13:45 Project Schedule Management: Enabling Interoperability in the 13:45 Interoperability as key enabler for model based engineering 13:45 Workshop 1: and real-life benefits light of changing paradigms Dr. Jörg Wirtz, Airbus Helicopters Blockchain Technology and potential use cases Julian Metzler, BMW AG Thomas Holler, Dr. Ing. H. c. F. Porsche AG for Product Life Cycle Management Philipp Karner, Ventum Consulting GmbH & Co. KG Jochen Boy, PROSTEP AG Dr. Martin Holland, PROSTEP AG Dr. Norbert Lotter, PROSTEP AG 14:25 Break the Silos - How we develop solutions for the 14:25 Collaborative Systems Engineering based on 14:25 Bionic Aircraft – bionic ALM design with CAD / CAM integration- old economy with a start-up mindset Engineering IT Standards Melanie Gralow, Institut für Laser- und Anlagensystemtechnik Martin Neff, AUDI AG Dr. Sebastian Handschuh, Daimler AG der TUHH Dr. Daniel Steffen, UNITY AG Dr. Marcus Krastel, :em engineering methods AG 15:05 Building a Visual Enterprise that spans from Product 15:05 Cross-Discipline Lifecycle Collaboration Forum – a linked Systems 15:05 Spinning a Standards-Based Digital Thread for Smart Management. over Virtual Prototyping to After Market Engineering approach Manufacturing Anton Müchler, Wacker Neuson SE Peter Gerber, Schaeffler Technologies AG & Co. KG Allison Barnard Feeney, National Institute of Standards Johann Dornbach, SAP SE and Technology 15:45 Coffee Break Openness Project Experience Open Source & Standards 16:15 CPO – corner stone for digital continuity and Future PLM 16:15 Pimp My PLM! An Agile Toolchain for Geometrical Data 16:15 Leveraging process integration at an OEM with 16:15 Workshop 2: Certification – state & ongoing activities Supply to China Joint Venture STEP AP 242 XML Usage of Digital Twins as Enabler of New and Dr. Youssef Aidi, thyssenkrupp AG Dr. Andreas Nordgren, BMW AG Manuel Nagler, BMW AG Innovative Services and Business Model Jürgen Henn, Schaeffler Technologies AG & Co. KG Dr. Mirko Theiß, PROSTEP AG Prof. Martin Eigner, TU Kaiserlautern – VPE Michael Hertwig, Fraunhofer IAO Thomas Eickhoff, TU Kaiserslautern – VPE Dr. Dietmar Trippner, drei consult 16:55 Insight Japanese OEM 16:55 Integrated digital PLM processes of a global-leading 16:55 Open Source Software as an Enabler for Industrie 4.0 Hideyuki Tanaka, Honda R&D Co.,Ltd. Automobile automotive supplier Benjamin Cabé, Eclipse Foundation Dr. Alexander Burger, MAHLE International GmbH Frank Patz-Brockmann, CONTACT Software GmbH 17:45 Keynote Digital Darwinism and Dematerialization The Re-distribution of the World in the Era of Digital Darwinism Karl-Heinz Land 18:25 Get together prostep ivip Symposium 2018 Kindly supported by Program Day 2 Thursday, 19 April 2018 08:00 Registration Novel Approaches Visualization Scientific Track Workshops 08:30 PDM in the Cloud – worldwide access to 08:30 JT and VEC: Open Standards as Enablers for Upcoming 08:30 Winner Scientific Award engineering data Harness Engineering Use Cases Harald Katzenstein, Daimler AG Heide Melchior, Volkswagen AG Ralf Luithardt, SSC-Services GmbH Johannes Becker, 4Soft GmbH 09:10 Model-based class approval and site inspection 09:10 JT within the digital tool chain – accomplishments and vision 09:10 Model Based Systems Engineering (MBSE) as a holistic Patrick Stockden, Meyer Werft GmbH & Co. KG Rudolf Dotzauer, Continental Automotive Group Approach and Enabler for Autonomous Driving Systems Lukas Niepert, PROSTEP AG Dr. Sebastian Handschuh, Daimler AG Prof. Dr. Vahid Salehi, Hochschule für Angewandte Wissenschaften München 09:50 3D supported quality control in automotive painted body 09:50 Standardisation of JT and its success in Industry 09:50 Virtual commissioning with Smart Hybrid Prototyping manufacturing – Challenges and experiences in productive Prof. Alfred Katzenbach, Katzenbach Executive Consulting Prof. Dr. Rainer Stark, Fraunhofer IPK operations Dr. Patrick Müller, CONTACT Software GmbH Bernhard Fritz, Magna Steyr Germar Nikol, Kisters AG 10:30 Coffee Break Systems Engineering Smart Manufacturing Scientific Track 11:00 Testing of Autonomous Driving Functions with 11:00 Driving the Digital Transformation in Production: 11:00 Vitual twin approach – enabling technology for an integrated 11:00 Workshop 3: virtual ECUs How Digital Twins link the Digital Factory with the Shopfloor engineering and manufacturing ReqIF-based Migration of Requirements to Modern Martin Rühl, dSPACE GmbH Frank Jelich, Volkswagen AG Prof. Dr. Jochen Deuse, Institut für Produktionssysteme (IPS) Requirements Engineering Systems Hans-Martin Heinkel, Robert Bosch GmbH Dr. Raimund Menges, DELTA Management Beratung GmbH Julian Schallow, IPS Engineers GmbH Dr. Thomas Noack, Individual Standard IVS GmbH 11:40 SmartSE – Best practices for industry-orientated, 11:40 Challenges of the Additive Manufacturing value-added chain 11:40 AI in Product & Manufacturing Engineering – application-focused collaborative system development Kai Glaesner, Daimler AG get your PLM & IoT data Dr. Stefan Rude, BMW AG Hartwig Dümler, PROSTEP AG Prof. Dr. Jochen Deuse, Institut für Produktionssysteme (IPS) Dr. Timo Wekerle, PROSTEP AG Prof. Dr. Rainer Stark, Fraunhofer IPK 12:20 Lunch Break Systems Engineering Quality Integration & MBSE 13:50 SmartSE – Simulation Architectures and Interchange 13:50 The Digital Twin and the Role of 3D Measurement Data for 13:50 Implementing Model-Based Systems Engineering – 13:50 Workshop 4: Standards Predictive Quality Management a Human Centric Approach Virtual commissioning as a key approach to validate Hans-Martin Heinkel, Robert Bosch GmbH Helmut Tiringer, BMW AG Jochen Epple, Daimler AG smart production systesm Martin Geissen, UNITY AG Dr. Martin Strietzel, PROSTEP AG Stephan Blankenburg, TWT GmbH Claas Blume, Fraunhofer IPK Stephan Mönchinger, Fraunhofer IPK 14:30 Enabling Virtual Product Validation: Standards for 14:30 Keys for using expert algorithms within a digital culture 14:30 The Role of OSLC in a Corporate Product Development Collaborative Simulation of Autonomous Driving during the development phase design Architecture Pierre Mai, PMSF IT Consulting Fabien Figueres, PSA Peugeot Citroen France Volker Pönisch, Ford Motor Company Carlo van Driesten, BMW AG Dr. Carsten Zerbst, PROSTEP AG 15:20 Keynote Schaeffler AG 16:00 Closing of the Event All lectures will be interpreted simultaneously (German/English, English/German).
Load more

Recommended publications
  • Use of ISO 10303 STEP AP242 Edition 1 for Configured MBD Interoperability - Enhancements of AP242 Ed2; - Related Interoperability Forums
    - Use of ISO 10303 STEP AP242 edition 1 for configured MBD interoperability - Enhancements of AP242 ed2; - Related Interoperability Forums. Jean-Yves DELAUNAY Airbus Operations . GPDIS_2019.ppt | 1 Global Product Data Interoperability Summit | 2019 • Jean-Yves Delaunay Airbus Engineering, PLM Interoperability expert Based in Toulouse, France Joined Airbus in 1990 • Before Airbus: o Automotive: Peugeot SA (1985 – 1987) o Ship Building: DCN (1987 – 1989) o Engineer diplomas in Mechanical Engineering (HEI) and in Computer Aided Design (ENSIMAG) • 3 great daughters • Hobbies: walking, swimming, history and cinemas. GPDIS_2019.ppt | 2 Table Global Product Data Interoperability Summit | 2019 • Summary of implementation and use of ISO 10303 AP242 edition 1 • Enhancements and new capabilities developed in AP242 edition 2 • Speeding up of solutions deployment with Interoperability Forums • Preparation of AP242 enhancements using Agile methods (ed3, etc) • AP242 links with other PLM standards to support the digital thread . GPDIS_2019.ppt | 3 ISO 10303 AP242: the recognized Aerospace & Defense standard for 3D Model Based Definition interoperability Global Product Data Interoperability Summit | 2019 Scope of STEP AP242 ed1 (International Standard in 2015) . GPDIS_2019.ppt | 4 Example of implementation of AP242 ed1 for CAD exchange Global Product Data Interoperability Summit | 2019 CAD to CAD CAD to CAM data exchange data exchange using AP242 ed1 using STEP AP242 ed 1 (3D with PMI) 3D DMU data exchange with cabin equipment suppliers in AP214 / AP242 (Airbus) Exemple of STEP file imported in 3DExperience AP242 Semantic GD&T interop. capability is implemented in the recent CAD applications . GPDIS_2019.ppt | 5 Overview of STEP AP242 ed1 COTS interfaces capabilities for PDM – CM data exchange Global Product Data Interoperability Summit | 2019 From AFNeT 2019 Standardizay Days Major PDM systems have several COTS AP242 interfaces for PDM “As designed” data exchange, either developed by their editors or by third party integrators .
    [Show full text]
  • Jahresbericht 2018 Projekte Im Vereininhalt
    Jahresbericht prostep ivip e.V. 2018 prostep ivip e.V. Tel. +49 6151 9287-336 Dolivostraße 11 Fax +49 6151 9287-326 64293 Darmstadt [email protected] Germany www.prostep.org 2 prostep ivip Jahresbericht 2018 Projekte im VereinInhalt Inhalt Editorial 5 Mitgliederliste 6 Highlights Technisches Programm 8 Highlights Öffentlichkeitsarbeit 2018 10 Webinare 12 Projekte im Verein 13 3D Messdatenmanagement Implementor Forum (3D MDM IF) ................................................................ 14 3D Messdatenmanagement Workflow Forum (3D MDM WF) ................................................................... 15 Additive Manufacturing Interfaces (AMI) ...................................................................................................... 16 CAx Implementor Forum (CAx-IF) .................................................................................................................. 17 Cross-Discipline Lifecycle Collaboration Forum (CDLC Forum) ................................................................ 18 Code of PLM Openness (CPO) ....................................................................................................................... 19 Data Preparation for Data Analytics (DPDA) ................................................................................................. 20 ECAD Implementor Forum (ECAD-IF) ........................................................................................................... 21 ECAD/MCAD-Collaboration Implementor Forum (EDMD-IF) ...................................................................
    [Show full text]
  • Project Progress
    4th JT Day Let’s talk JT! Volkswagen Arena, Wolfsburg November 5th, 2018 © 2017, prostep ivip e.V. / VDA, Nov 5th, 2018 1 Welcome! to the 4th JT Day Let’s talk JT! Rudolf Dotzauer Dr. Sebastian Handschuh Stefan Just Director Customer Supplier Integration Manager IT Technologie CAD Manager PLM Strategy & Processes Continental AG Daimler AG Prostep AG © 2017, prostep ivip e.V. / VDA, Nov 5th, 2018 2 Welcome at Volkswagen Arena - Wolfsburg © 2017, prostep ivip e.V. / VDA, Nov 5th, 2018 3 Todays Inspiration understanding the importance of JT as an industry-oriented, powerful 3D-backbone format for the whole digital enterprise -Let’s talk JT! © 2017, prostep ivip e.V. / VDA, Nov 5th, 2018 4 Who is in today 140+ 60 13 16 Attendees Organizations Exhibitors Speakers Technology provider Aerospace Product & Part Manufacturing IT Services Computer Software Automotive Manufacturing Engineering Services Consulting Services Machinery Manufacturing © 2017, prostep ivip e.V. / VDA, Nov 5th, 2018 5 Participants from widely spread locations KÖLNDarmstadt Ulm STUTTGART - WOLFSBURG Neu MÜNCHEN DRESDEN CAMBRIDGE ZwickauTAMWORTH MÖMBRIS BÖBLINGEN INGOLSTADT Yoyogi Aachen Blomberg NÜRNBERG Frankfurt THESSALONIKI GUYANCOURT HAMBURG TOKIO Bockenem © 2017, prostep ivip e.V. / VDA, Nov 5th, 2018 6 Event map JT Day Nov 5th, 2018 Soccer stadium exhibition drinks, auditorium food +talks registration Event entrance 1. floor VIP entrance, ground floor © 2017, prostep ivip e.V. / VDA, Nov 5th, 2018 7 Exhibition Plan 1. Volkswagen AG 2. Siemens Industry Software GmbH 3. CT CoreTechnologie 4. Fraunhofer IGD 5. KISTERS AG 6. SSC-Services 1 2 3 4 5 6 GmbH 7 7. TechniaTranscat GmbH 8.
    [Show full text]
  • Role of JT in Digital Transformation Strategies Prostep Ivip Symposium May 18Th, 2017 – Essen 9:50Am to 10:30Am
    Role of JT in Digital Transformation Strategies ProSTEP iViP Symposium May 18th, 2017 – Essen 9:50am to 10:30am Rudolf Dotzauer Dr. Sebastian Handschuh Director Customer Supplier Integration Manager Eng. Collaboration Concepts & Standards Continental AG Daimler AG © 2016, ProSTEP iViP / VDA , 17-06-01 Agenda • JT – The multi‐disciplinary 3D backbone for the digital enterprise • Activities at PROSTEP iViP Association and VDA • JT in Productive Usage •3rd JT Day © 2016, ProSTEP iViP / VDA , 17-06-01 -2- Future scope of Engineering is based on 3D Information • Intensive usage of new IT technologies in all phases of the PLC – Example: Virtual / Augmented Reality • Focus on agility and functional Model Based Engineering – Example: 3D Master, Systems Engineering • Cross discipline collaboration wherever, whenever – Easy to use user interfaces (e.g. mechanic, service, software and electronic) • Ratio between Data Creator and Data Consumer of 3D Information 1/10 Industry needs simple solutions for the efficient use of 3D information Source: Continental © 2016, ProSTEP iViP / VDA , 17-06-01 -3- JT enables efficient use of 3D Everywhere, where 3D knowledge needs to be leveraged It seamlessly connects to the upstream and feeds the downstream in digital transformation strategies (e.g. requirement specifications, interoperability, additive manufacturing and augmented reality Use Cases) Engineering Manufacturing Aftersales Systems Engineering Industry 4.0 Internet of Things JT – The Multi‐Disciplinary 3D Backbone for the Digital Enterprise © 2016, ProSTEP iViP / VDA , 17-06-01 -4- Jupiter Tesselation (JT) Format in a Glance JT is an industry focused, high‐performance, lightweight, flexible file format for capturing and repurposing 3D product definition data.
    [Show full text]
  • Intland Software Joins Prostep Ivip
    Intland Software GmbH Phone: (+49) 711-2195-420 107 Sigmaringer Str. Fax: (+49) 711-2195-4210 70567 Stuttgart Germany Intland Software Joins prostep ivip Intland Software, developer of codeBeamer ALM today announced their partnership with the international prostep ivip community to further the development of collaborative engineering processes. As the tool provider of all major German automotive OEMs, Intland joins a distinguished group of participants from industry, IT, and research working to develop standards for requirements management and product data management. STUTTGART, GERMANY, 6 JUN 2018 Founded in 1993, the prostep ivip association is a global independent network of IT experts focusing on product data management and integrated virtual product creation (iViP). With founding members including Bosch, Continental, Daimler, Delphi, Opel, Siemens, and Volkswagen, prostep ivip brings together esteemed multinational companies working towards more efficient processes, methods and systems in product engineering. With the adoption of codeBeamer ALM by both startups and major global OEMs, Intland’s Application Lifecycle Management platform is on the way to becoming a standard tool to support product engineering in various industries. The innovative software provider welcomes the opportunity to contribute to the work of this global network aiming to solve problems around product data management and virtual product creation. Intland Software’s CEO Janos Koppany said: As software partners of major German automotive OEMs and global companies in multiple sectors, we recognize product developers’ need to better understand customer requirements and quickly recognize market trends in a digital era. Intland is happy to be able to participate in the work of prostep ivip. We hope that the expertise we bring to the table will help deliver solutions that allow members of the association to better fulfill customer requirements in their product development efforts, and further their ability to compete in the global marketplace.
    [Show full text]
  • Annual Report 2018 Projects of the Associationinhalt
    Annual Report prostep ivip Association 2018 prostep ivip Association Phone +49 6151 9287-336 Dolivostraße 11 Fax +49 6151 9287-326 64293 Darmstadt [email protected] Germany www.prostep.org 2 prostep ivip Annual report 2018 Projects of the associationInhalt Content Editorial 5 List of Members 6 Highlights of the technical program 8 Public Relations Highlights 2018 10 Webinars 12 Projects of the Association 13 3D Measurement Data Management Implementor Forum (3D MDM IF) ................................................. 14 3D Measurement Data Management Workflow Forum (3D MDM WF) .................................................... 15 Additive Manufacturing Interfaces (AMI) ...................................................................................................... 16 CAx Implementor Forum (CAx IF) .................................................................................................................. 17 Cross-Discipline Lifecycle Collaboration Forum (CDLC Forum) ................................................................. 18 Code of PLM Openness (CPO) ....................................................................................................................... 19 Data Preparation for Data Analytics (DPDA) ................................................................................................. 20 ECAD Implementor Forum (ECAD IF) ........................................................................................................... 21 ECAD/MCAD-Collaboration Implementor Forum (EDMD IF) ...................................................................
    [Show full text]
  • Collaborative Product Visualization (CPV) Final Report
    ProSTEP iViP Referring to PSI 2 Documentation Collaborative Product Visualization (CPV) Final Report Version 1.0, 01.11.2006 Status: Final © ProSTEP iViP Association Collaborative Product Visualization (CPV) Final Report Version 1.0, 01.11.2006 Abstract ProSTEP iViP’s project group “Collaborative Product Visualization” had the simplification of product data exchange via harmonization of the visualization data exchange as aim. This project final report addresses the non-technical lessons learned as well as the issues. Technical issues are addressed in the recommendation proposal; financial issues are addressed in the project plan. In this document the project course is reflected. The done work packages are reflected shortly. Parallel developments like the presentation of new visualization file formats or publication of related recommendation during project time are mentioned. The course of the project didn’t work out as originally planned. Some distinctive points are discussed, mostly concerning the small number and slow progress of pilots. It’s important to mention that there were only few and slow pilots. An outlook gives some notes and information which should be regarded on a successor project. Referring to PSI 2 ii © ProSTEP iViP Association – All rights reserved Collaborative Product Visualization (CPV) Final Report Version 1.0, 01.11.2006 Document History Version Date Author Description 1.0 Nov 06 Malzacher, J. Initial Version Referring to PSI 2 iii © ProSTEP iViP Association – All rights reserved Collaborative Product Visualization
    [Show full text]
  • S660 - Thingworx Connectors- Unleash the Power Within Plm
    S660 - THINGWORX CONNECTORS- UNLEASH THE POWER WITHIN PLM Paul W. Downing President & CEO – PROSTEP INC liveworx.com #LIVEWORX SESSION OVERVIEW Accessing reliable and up-to-date PDM, SDM, ERP or ALM information at any time is essential. However, that can be challenging because the information is distributed across different systems to comply with regulatory restrictions, access restricted, or is represented in different formats. Companies in all industries are forced to work with heterogeneous IT system infrastructures. This presentation outlines how ThingWorx Connectors easily federate a vast selection of PDM, SDM, ERP and ALM systems of different vendors to the PTC ThingWorx and PTC Navigate toolset. Learn to leverage a framework to connect systems of any kind and build new applications leveraging data from any system. 1. Understand a solution for integrating any PLM system with ThingWorx and PTC Navigate. 2. Identify common risks and challenges of integrating multiple vendor systems. 3. Learn where to start with the requirements and scope of a multi-system integration project. #LIVEWORX 2 AGENDA Company Overview Technology Framework Thingworx Demos Integration Planning #LIVEWORX 3 AGENDA Company Overview Technology Framework Thingworx Demos Integration Planning #LIVEWORX 4 WHO IS PROSTEP ? A vendor neutral / independent engineering services and software company since 1993 Reseller Over 25 years experience with engineering interoperability, migration, intelligent documents, benchmarking, more Approximately 250 employees and consultants
    [Show full text]
  • RECOMMENDATION Requirements Interchange Format (RIF), PSI 6 Version 1.2 ABSTRACT Prostep Ivip Recommendation
    Requirements Interchange Format (RIF) RECOMMENDATION Requirements Interchange Format (RIF), PSI 6 Version 1.2 ABSTRACT ProSTEP iViP Recommendation Abstract Requirements management has been established in the industry as a primary method to get flawlessly from the early product target definitions over the implementation up to the validation and testing phase. Despite its cross-functional nature requirements ma- nagement is a key factor for successful partner integration within the development cycle. Manufacturers specify requirements for their entire product as well as the aggregation of systems/components and their suppliers provide system specifications descri- bing how their product will meet these needs. In order to manage the complexity growths due to the increase of requirements and requirement specifications, especially with regards to mechatronics, manufacturers and suppliers introduced requirements management systems. These systems are used within an organizational context but can not really bridge the gap between ma- nufacturers and suppliers, as only tool specific exchange formats and methods exist. In order to address the circumstance of the unavailability of a generic requirements exchange format the “Simulation and Tools” Group of the HIS (Hersteller Initiative Software) specified the Requirement Interchange Format (RIF). This specification was then handed over to the ProSTEP iViP Association to be published as ProSTEP iViP Recommendation. This Recommendation will serve as a basis for a future international standardization of the RIF to enable its broad application. This ProSTEP iViP Recommendation covers the use cases to be supported, the format specification as data model description and additional implementation details to be considered. II PSI 6 (RIF) / V 1.2 / October 2008 ProSTEP iViP Recommendation DISCLAIMER · COPYRIGHT Disclaimer ProSTEP iViP Recommendations (PSI Recommendations) are recommendations that are available for general use.
    [Show full text]
  • NAFEMS 2008 Regional Summit
    Simulation Data Management with Interoperability Across Domains Andreas Schreiber PROSTEP, Inc. Company Overview Since its foundation in 1993, PROSTEP has become a leading provider of turn-key solutions for engineering processes in the areas of product data integration, data migration and supply chain communication for manufacturers and suppliers. Interoperability between PDM, CAD, ERP, CAE, BoM and Legacy system with product structure PROSTEP Owners: interchange and conversion. STEP Standardization 2 NAFEMS 2020 Vision of Engineering Analysis and Simulation PROSTEP’s shareholder structure Management ~ 16% ~ 10% ~ 12% NAFEMS 2020 Vision of Engineering Analysis and Simulation ProSTEP iViP Verein – Worldwide Members Adam OPEL AG Industry (Users) Softlab GmbH Agile Software GmbH Stellenbosch University Airbus Deutschland GmbH em engineering methods AG SupplyOn AG Alfmeier Präzision AG EPLAN Software & Serv. GmbH & Co. KG T-Systems International GmbH Alias Systems EPM Technology TAKATA-PETRI AG Arvin Meritor Emissions Techn. GmbH Eurostep Commercial Tata Engineering & Locomotive Co. Ltd. Audi AG exxcellent solutions GmbH IT System Vendors Tecnomatix Automat.-systeme GmbH Avanion GmbH Faurecia Innenraumsysteme GmbH Theorem Solutions Ltd. AVL-List GmbH fischer automotive systems GmbH ThyssenKrupp Fahrzeugguss Behr GmbH & Co. Ford-Werke AG ThyssenKrupp Technologies AG Berliner Kreis e. V. FH Furtwangen, FB Wirtschaftsinformatik TMS Produktionssysteme GmbH Bertrandt AG FhG IGD Universities, Associations Tower Automotive GmbH & Co. KG BMW AG FhG IAO Toyota Motorsport GmbH Borg Warner Turbo Systems GmbH FhG IPK TRW Automotive Safety Systems GmbH & Co. KG Brose Fahrzeugteile GmbH & Co. KG FHS St. Gallen, Institut für Mechatronik und IT TRW Fahrwerksysteme GmbH u. Co. KG C. Rob. Hammerstein GmbH & Co. KG Forschungszentrum Karlsruhe TRW Lucas Automotive GmbH CapeWare Software GmbH Freudenberg Dichtungs- und Schwingungstechnik KG TRW Automotive GmbH cards Engineering GmbH & Co.
    [Show full text]
  • Integration Webinar
    3DEXPERIENCE INTEROPERABILITY 3DEXPERIENCE Integration and Migration © PROSTEP AG 2016 | Alle Rechte vorbehalten / All Rights reserved Datum, Autor We are • an independent company specializing in PLM consultancy services and engineering solutions. • experts in providing leading global manufacturing companies with the support they require for designing and optimizing their internal and cross-enterprise development processes. • the specialist for distributed engineering processes involving heterogeneous IT systems. © PROSTEP AG 2017 | Alle Rechte vorbehalten / All rights reserved May 2017, PP 3 PROSTEP and ProSTEP iViP Association . A strong alliance The PROSTEP Group • The PLM specialist • Powerful integration solutions • Years of PLM know-how gained in the field The ProSTEP iViP Association • Industry and research platform • Standardization strategy • Worldwide collaboration © PROSTEP AG 2016 | Alle Rechte vorbehalten / All Rights reserved ProSTEP iViP Association Members worldwide . 4Soft GmbH . collaboration Factory AG . FhG IAO . iPoint-systems GmbH . P&PM Solutions & Consulting . TechniaTranscat GmbH . Accenture PLM GmbH . COMSA Computer und Software . FhG IGD . ITI GmbH GmbH . TEDATA GmbH . acentrix GmbH GmbH . FhG IPK . JAMA-Japan Automobile . Parametric Technology GmbH . Theorem Solutions Ltd. Actano GmbH . CONTACT Software GmbH . FhG ITWM Manufacturer Assoc. PDTec GmbH . ThyssenKrupp AG . Adam Opel AG . Conti TEMIC microelectronic . FH Nordwestschweiz (IFK) . Johnson Controls GmbH . Pierburg GmbH . TOYOTA Motor Corporation . Airbus Defence & Space GmbH GmbH . Ford Werke GmbH . Johnson Controls Components . Porsche Engineering Services . TranscenData Europe Ltd. Airbus Operations GmbH . Continental AG . Forschungszentrum Karlsruhe GmbH & Co. KG GmbH . TU Chemnitz (IWP) . Altium Europe GmbH . Continental Automotive GmbH GmbH . Karlsruher Institut für . PROSTEP AG . TU Darmstadt (DiK) . Altran Consulting & Engineering . Continental Teves AG & Co. OHG . Freudenberg Sealing Technologie (KIT) PROSTEP Inc.
    [Show full text]
  • Project Progress
    3rd JT Day Driving the Digital Highway Bosch Campus in Renningen October 17th, 2017 © 2017, prostep ivip e.V. / VDA Oct 17th, 2017 1 3rd JT Day Driving the Digital Highway Rudolf Dotzauer Dr. Sebastian Handschuh Director Manager Customer Supplier Integration Engineering Collaboration Concepts & Standards Continental AG Daimler AG © 2017, prostep ivip e.V. / VDA Oct 17th, 2017 2 Welcome at BOSCH R&D Campus – Renningen © 2017, prostep ivip e.V. / VDA Oct 17th, 2017 3 Todays Inspiration Industry wide meeting point of the JT-Community Show JTs significance as powerful, flexible and lightweight Data-Format Give overview of JT as the multidisciplinary 3D Backbone for the digital Enterprise © 2017, prostep ivip e.V. / VDA Oct 17th, 2017 4 Who is in today 150+ 60 12 10 Attendees Organizations Exhibitors Speakers Medical Equipment Technology provider IT Services Mexico GB Aerospace Product & Part Manufacturing France Germany Computer Software University Greece Japan Automotive Manufacturing EngineeringSwitzerland Services Railroad Equipment Manufacturing Machinery Manufacturing © 2017, prostep ivip e.V. / VDA Oct 17th, 2017 5 Auditorium and Exhibition Map Exhibitors 1 1. :em AG 2 2. CT CoreTechnologie 3 GmbH 4 3. Elysium Europe SARL 5 Foyer 4. Fraunhofer IGD 6 Auditorium 5. invenio - Engineering Solutions 6. ITI – International TechneGroup 7 10 7. KISTERS AG 8 11 8. PROSTEP AG 9 12 9. Siemens Industry Software GmbH 10. SSC-Services GmbH Registration Desk Conference Service 11. TechniaTranscat GmbH Exhibition Desks Lunch Buffet 12. T-Systems GmbH Lunch Desks © 2017, prostep ivip e.V. / VDA Oct 17th, 2017 6 Agenda of today (1/2) : Keynotes Moderation by Prof.
    [Show full text]