DOCSLIB.ORG

Gratings: Amplitude, Phase, Sinusoidal, Binary

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Gratings: Amplitude, Phase, Sinusoidal, Binary Today • Gratings: – Sinusoidal amplitude grating – Sinusoidal phase grating – in general: spatially periodic thin transparency Wednesday • Fraunhofer diffraction • Fraunhofer patterns of typical apertures • Spatial frequencies and Fourier transforms MIT 2.71/2.710 04/06/09 wk9-a- 1 Gratings Amplitude grating Phase grating 1 1 0.75 0.75 | [a.u.] | [a.u.] t 0.5 t 0.5 |g |g 0.25 0.25 0 0 −30 −20 −10 0 10 20 30 −30 −20 −10 0 10 20 30 x [λ] x [λ] pi pi pi/2 pi/2 ) [rad] t ) [rad] t 0 0 −pi/2 phase(g −pi/2 phase(g −pi −pi −30 −20 −10 0 10 20 30 −30 −20 −10 0 10 20 30 x [λ] x [λ] Λ: period; m: contrast; φ: phase shift Λ: period; m: phase contrast; φ: phase shift MIT 2.71/2.710 04/06/09 wk9-a- 2 Gratings Amplitude grating Phase grating x x y z y z MIT 2.71/2.710 04/06/09 wk9-a- 3 Sinusoidal amplitude grating … OPLD = Λsin θ constructive interference if OPLD = qλ (q integer) st +1 order Only the n=0th and n=±1st diffraction orders are generated The n=0th diffraction order Λ θ is also known as the DC term incident –θ plane wave −1st order u : Grating 0 spatial … period frequency MIT 2.71/2.710 04/06/09 wk9-a- 4 Sinusoidal amplitude grating … +1st order Λ θ 0th order (or DC term) incident –θ plane diffraction angle wave -1st order spatial frequency … diffraction efficiencies MIT 2.71/2.710 04/06/09 wk9-a- 5 Sinusoidal phase grating s q=+5 “surface relief” grating q=+4 Transmission function q=+3 Λ q=+2 q=+1 (n 1)s m 2π − ≡ λ q=0 “phase contrast” incident q= –1 plane Useful math property: wave q= –2 + ∞ q= –3 exp iα sin (θ) = Jq (α) exp (iqθ) q= ! " #−∞ q= –4 st Jm: Bessel function of 1 kind, q= –5 m-th order glass refractive index n MIT 2.71/2.710 04/06/09 wk9-a- 6 Sinusoidal phase grating s q=+5 Field after grating is expressed as: q=+4 q=+3 Λ amplitude q=+2 q=+1 q=0 plane waves (diffraction orders), propagation angle incident q= –1 plane wave q= –2 q= –3 The q-th exponential physically is q= –4 a plane wave propagating at angle θq q= –5 i.e. the q-th diffraction order glass refractive index n MIT 2.71/2.710 04/06/09 wk9-a- 7 Fresnel diffraction from a grating as a Fourier series More generally, a periodic transparency’s complex amplitude transmission may be s q=+5 expressed as a Fourier series expansion: q=+4 q=+3 Λ q=+2 amplitudes q=+1 q=0 incident q= –1 plane plane waves (diffraction orders), wave q= –2 propagation angle q= –3 q= –4 absorptive q= –5 diffraction efficiencies bands glass refractive index n MIT 2.71/2.710 04/06/09 wk9-a- 8 Example: binary phase grating 1 0.75 s | [a.u.] q=+5 t 0.5 |g 0.25 q=+4 0 −30 −20 −10 0 10 20 30 x [!] q=+3 pi Λ pi/2 q=+2 ) [rad] t 0 −pi/2 q=+1 phase(g Duty cycle = 0.5 −pi −30 −20 −10 0 10 20 30 x [!] q=0 incident q= –1 plane wave q= –2 q= –3 q= –4 q= –5 glass refractive index n MIT 2.71/2.710 04/06/09 wk9-a- 9 MIT OpenCourseWare http://ocw.mit.edu 2.71 / 2.710 Optics Spring 2009 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. .
Load more

Recommended publications
  • Glossary Physics (I-Introduction)
    1 Glossary Physics (I-introduction) - Efficiency: The percent of the work put into a machine that is converted into useful work output; = work done / energy used [-]. = eta In machines: The work output of any machine cannot exceed the work input (<=100%); in an ideal machine, where no energy is transformed into heat: work(input) = work(output), =100%. Energy: The property of a system that enables it to do work. Conservation o. E.: Energy cannot be created or destroyed; it may be transformed from one form into another, but the total amount of energy never changes. Equilibrium: The state of an object when not acted upon by a net force or net torque; an object in equilibrium may be at rest or moving at uniform velocity - not accelerating. Mechanical E.: The state of an object or system of objects for which any impressed forces cancels to zero and no acceleration occurs. Dynamic E.: Object is moving without experiencing acceleration. Static E.: Object is at rest.F Force: The influence that can cause an object to be accelerated or retarded; is always in the direction of the net force, hence a vector quantity; the four elementary forces are: Electromagnetic F.: Is an attraction or repulsion G, gravit. const.6.672E-11[Nm2/kg2] between electric charges: d, distance [m] 2 2 2 2 F = 1/(40) (q1q2/d ) [(CC/m )(Nm /C )] = [N] m,M, mass [kg] Gravitational F.: Is a mutual attraction between all masses: q, charge [As] [C] 2 2 2 2 F = GmM/d [Nm /kg kg 1/m ] = [N] 0, dielectric constant Strong F.: (nuclear force) Acts within the nuclei of atoms: 8.854E-12 [C2/Nm2] [F/m] 2 2 2 2 2 F = 1/(40) (e /d ) [(CC/m )(Nm /C )] = [N] , 3.14 [-] Weak F.: Manifests itself in special reactions among elementary e, 1.60210 E-19 [As] [C] particles, such as the reaction that occur in radioactive decay.
    [Show full text]
  • Frequency Response = K − Ml
    Frequency Response 1. Introduction We will examine the response of a second order linear constant coefficient system to a sinusoidal input. We will pay special attention to the way the output changes as the frequency of the input changes. This is what we mean by the frequency response of the system. In particular, we will look at the amplitude response and the phase response; that is, the amplitude and phase lag of the system’s output considered as functions of the input frequency. In O.4 the Exponential Input Theorem was used to find a particular solution in the case of exponential or sinusoidal input. Here we will work out in detail the formulas for a second order system. We will then interpret these formulas as the frequency response of a mechanical system. In particular, we will look at damped-spring-mass systems. We will study carefully two cases: first, when the mass is driven by pushing on the spring and second, when the mass is driven by pushing on the dashpot. Both these systems have the same form p(D)x = q(t), but their amplitude responses are very different. This is because, as we will see, it can make physical sense to designate something other than q(t) as the input. For example, in the system mx0 + bx0 + kx = by0 we will consider y to be the input. (Of course, y is related to the expression on the right- hand-side of the equation, but it is not exactly the same.) 2. Sinusoidally Driven Systems: Second Order Constant Coefficient DE’s We start with the second order linear constant coefficient (CC) DE, which as we’ve seen can be interpreted as modeling a damped forced harmonic oscillator.
    [Show full text]
  • Multidisciplinary Design Project Engineering Dictionary Version 0.0.2
    Multidisciplinary Design Project Engineering Dictionary Version 0.0.2 February 15, 2006 . DRAFT Cambridge-MIT Institute Multidisciplinary Design Project This Dictionary/Glossary of Engineering terms has been compiled to compliment the work developed as part of the Multi-disciplinary Design Project (MDP), which is a programme to develop teaching material and kits to aid the running of mechtronics projects in Universities and Schools. The project is being carried out with support from the Cambridge-MIT Institute undergraduate teaching programe. For more information about the project please visit the MDP website at http://www-mdp.eng.cam.ac.uk or contact Dr. Peter Long Prof. Alex Slocum Cambridge University Engineering Department Massachusetts Institute of Technology Trumpington Street, 77 Massachusetts Ave. Cambridge. Cambridge MA 02139-4307 CB2 1PZ. USA e-mail: [email protected] e-mail: [email protected] tel: +44 (0) 1223 332779 tel: +1 617 253 0012 For information about the CMI initiative please see Cambridge-MIT Institute website :- http://www.cambridge-mit.org CMI CMI, University of Cambridge Massachusetts Institute of Technology 10 Miller’s Yard, 77 Massachusetts Ave. Mill Lane, Cambridge MA 02139-4307 Cambridge. CB2 1RQ. USA tel: +44 (0) 1223 327207 tel. +1 617 253 7732 fax: +44 (0) 1223 765891 fax. +1 617 258 8539 . DRAFT 2 CMI-MDP Programme 1 Introduction This dictionary/glossary has not been developed as a definative work but as a useful reference book for engi- neering students to search when looking for the meaning of a word/phrase. It has been compiled from a number of existing glossaries together with a number of local additions.
    [Show full text]
  • To Learn the Basic Properties of Traveling Waves. Slide 20-2 Chapter 20 Preview
    Chapter 20 Traveling Waves Chapter Goal: To learn the basic properties of traveling waves. Slide 20-2 Chapter 20 Preview Slide 20-3 Chapter 20 Preview Slide 20-5 • result from periodic disturbance • same period (frequency) as source 1 f • Longitudinal or Transverse Waves • Characterized by – amplitude (how far do the “bits” move from their equilibrium positions? Amplitude of MEDIUM) – period or frequency (how long does it take for each “bit” to go through one cycle?) – wavelength (over what distance does the cycle repeat in a freeze frame?) – wave speed (how fast is the energy transferred?) vf v Wavelength and Frequency are Inversely related: f The shorter the wavelength, the higher the frequency. The longer the wavelength, the lower the frequency. 3Hz 5Hz Spherical Waves Wave speed: Depends on Properties of the Medium: Temperature, Density, Elasticity, Tension, Relative Motion vf Transverse Wave • A traveling wave or pulse that causes the elements of the disturbed medium to move perpendicular to the direction of propagation is called a transverse wave Longitudinal Wave A traveling wave or pulse that causes the elements of the disturbed medium to move parallel to the direction of propagation is called a longitudinal wave: Pulse Tuning Fork Guitar String Types of Waves Sound String Wave PULSE: • traveling disturbance • transfers energy and momentum • no bulk motion of the medium • comes in two flavors • LONGitudinal • TRANSverse Traveling Pulse • For a pulse traveling to the right – y (x, t) = f (x – vt) • For a pulse traveling to
    [Show full text]
  • Resonance Beyond Frequency-Matching
    Resonance Beyond Frequency-Matching Zhenyu Wang (王振宇)1, Mingzhe Li (李明哲)1,2, & Ruifang Wang (王瑞方)1,2* 1 Department of Physics, Xiamen University, Xiamen 361005, China. 2 Institute of Theoretical Physics and Astrophysics, Xiamen University, Xiamen 361005, China. *Corresponding author. [email protected] Resonance, defined as the oscillation of a system when the temporal frequency of an external stimulus matches a natural frequency of the system, is important in both fundamental physics and applied disciplines. However, the spatial character of oscillation is not considered in the definition of resonance. In this work, we reveal the creation of spatial resonance when the stimulus matches the space pattern of a normal mode in an oscillating system. The complete resonance, which we call multidimensional resonance, is a combination of both the spatial and the conventionally defined (temporal) resonance and can be several orders of magnitude stronger than the temporal resonance alone. We further elucidate that the spin wave produced by multidimensional resonance drives considerably faster reversal of the vortex core in a magnetic nanodisk. Our findings provide insight into the nature of wave dynamics and open the door to novel applications. I. INTRODUCTION Resonance is a universal property of oscillation in both classical and quantum physics[1,2]. Resonance occurs at a wide range of scales, from subatomic particles[2,3] to astronomical objects[4]. A thorough understanding of resonance is therefore crucial for both fundamental research[4-8] and numerous related applications[9-12]. The simplest resonance system is composed of one oscillating element, for instance, a pendulum. Such a simple system features a single inherent resonance frequency.
    [Show full text]
  • Understanding What Really Happens at Resonance
    feature article Resonance Revealed: Understanding What Really Happens at Resonance Chris White Wood RESONANCE focus on some underlying principles and use these to construct The word has various meanings in acoustics, chemistry, vector diagrams to explain the resonance phenomenon. It thus electronics, mechanics, even astronomy. But for vibration aspires to provide a more intuitive understanding. professionals, it is the definition from the field of mechanics that is of interest, and it is usually stated thus: SYSTEM BEHAVIOR Before we move on to the why and how, let us review the what— “The condition where a system or body is subjected to an that is, what happens when a cyclic force, gradually increasing oscillating force close to its natural frequency.” from zero frequency, is applied to a vibrating system. Let us consider the shaft of some rotating machine. Rotor Yet this definition seems incomplete. It really only states the balancing is always performed to within a tolerance; there condition necessary for resonance to occur—telling us nothing will always be some degree of residual unbalance, which will of the condition itself. How does a system behave at resonance, give rise to a rotating centrifugal force. Although the residual and why? Why does the behavior change as it passes through unbalance is due to a nonsymmetrical distribution of mass resonance? Why does a system even have a natural frequency? around the center of rotation, we can think of it as an equivalent Of course, we can diagnose machinery vibration resonance “heavy spot” at some point on the rotor. problems without complete answers to these questions.
    [Show full text]
  • PHASOR DIAGRAMS II Fault Analysis Ron Alexander – Bonneville Power Administration
    PHASOR DIAGRAMS II Fault Analysis Ron Alexander – Bonneville Power Administration For any technician or engineer to understand the characteristics of a power system, the use of phasors and polarity are essential. They aid in the understanding and analysis of how the power system is connected and operates both during normal (balanced) conditions, as well as fault (unbalanced) conditions. Thus, as J. Lewis Blackburn of Westinghouse stated, “a sound theoretical and practical knowledge of phasors and polarity is a fundamental and valuable resource.” C C A A B B Balanced System Unbalanced System With the proper identification of circuits and assumed direction established in a circuit diagram (with the use of polarity), the corresponding phasor diagram can be drawn from either calculated or test data. Fortunately, most relays today along with digital fault recorders supply us with recorded quantities as seen during fault conditions. This in turn allows us to create a phasor diagram in which we can visualize how the power system was affected during a fault condition. FAULTS Faults are unavoidable in the operation of a power system. Faults are caused by: • Lightning • Insulator failure • Equipment failure • Trees • Accidents • Vandalism such as gunshots • Fires • Foreign material Faults are essentially short circuits on the power system and can occur between phases and ground in virtually any combination: • One phase to ground • Two phases to ground • Three phase to ground • Phase to phase As previously instructed by Cliff Harris of Idaho Power Company: Faults come uninvited and seldom leave voluntarily. Faults cause voltage to collapse and current to increase. Fault voltage and current magnitude depend on several factors, including source strength, location of fault, type of fault, system conditions, etc.
    [Show full text]
  • Sinusoidal Signals Sinusoidal Signals
    SINUSOIDAL SIGNALS SINUSOIDAL SIGNALS x(t) = cos(2¼ft + ') = cos(!t + ') (continuous time) x[n] = cos(2¼fn + ') = cos(!n + ') (discrete time) f : frequency (s¡1 (Hz)) ! : angular frequency (radians/s) ' : phase (radians) 2 Sinusoidal signals A cos(ω t) A sin(ω t) A 0 −A 0 T/2 T 3T/2 2T xc(t) = A cos(2¼ft) xs(t) = A sin(2¼ft) = A cos(2¼ft ¡ ¼=2) - amplitude A -amplitude A - period T = 1=f -period T = 1=f - phase: 0 -phase: ¡¼=2 3 WHY SINUSOIDAL SIGNALS? ² Physical reasons: - harmonic oscillators generate sinusoids, e.g., vibrating structures - waves consist of sinusoidals, e.g., acoustic waves or electromagnetic waves used in wireless transmission ² Psychophysical reason: - speech consists of superposition of sinusoids - human ear detects frequencies - human eye senses light of various frequencies ² Mathematical (and physical) reason: - Linear systems, both physical systems and man-made ¯lters, a®ect a signal frequency by frequency (hence low- pass, high-pass etc ¯lters) 4 EXAMPLE: TRANSMISSION OF A LOW-FREQUENCY SIGNAL USING HIGH-FREQUENCY ELECTROMAGNETIC (RADIO) SIGNAL - A POSSIBLE (CONVENTIONAL) METHOD: AMPLITUDE MODULATION (AM) Example: low-frequency signal v(t) = 5 + 2 cos(2¼f¢t); f¢ = 20 Hz High-frequency carrier wave vc(t) = cos(2¼fct); fc = 200 Hz Amplitude modulation (AM) of carrier (electromagnetic) wave: x(t) = v(t) cos(2¼fct) 5 8 6 4 2 v 0 −2 −4 −6 −8 8 6 4 2 x 0 −2 −4 −6 −8 0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.1 t Top: v(t) (dashed) and vc(t) = cos(2¼fct).
    [Show full text]
  • Characteristics of Sine Wave Ac Power
    CHARACTERISTICS OF BY: VIJAY SHARMA SINE WAVE AC POWER: ENGINEER DEFINITIONS OF ELECTRICAL CONCEPTS, specifications & operations Excerpt from Inverter Charger Series Manual CHARACTERISTICS OF SINE WAVE AC POWER 1.0 DEFINITIONS OF ELECTRICAL CONCEPTS, SPECIFICATIONS & OPERATIONS Polar Coordinate System: It is a two-dimensional coordinate system for graphical representation in which each point on a plane is determined by the radial coordinate and the angular coordinate. The radial coordinate denotes the point’s distance from a central point known as the pole. The angular coordinate (usually denoted by Ø or O t) denotes the positive or anti-clockwise (counter-clockwise) angle required to reach the point from the polar axis. Vector: It is a varying mathematical quantity that has a magnitude and direction. The voltage and current in a sinusoidal AC voltage can be represented by the voltage and current vectors in a Polar Coordinate System of graphical representation. Phase, Ø: It is denoted by"Ø" and is equal to the angular magnitude in a Polar Coordinate System of graphical representation of vectorial quantities. It is used to denote the angular distance between the voltage and the current vectors in a sinusoidal voltage. Power Factor, (PF): It is denoted by “PF” and is equal to the Cosine function of the Phase "Ø" (denoted CosØ) between the voltage and current vectors in a sinusoidal voltage. It is also equal to the ratio of the Active Power (P) in Watts to the Apparent Power (S) in VA. The maximum value is 1. Normally it ranges from 0.6 to 0.8. Voltage (V), Volts: It is denoted by “V” and the unit is “Volts” – denoted as “V”.
    [Show full text]
  • Last Time: LRC Circuits with Phasors…
    Last time: LRC Circuits with phasors… I X where . R L εm XLL ≡ ω C L ⇒ φ IR 1 ∼ X C ≡ I XC ωC ε The phasor diagram gives us graphical solutions for φ and I: 2 2 2 2 ε=IRXXm ( +( LC − ) ) I XL I XC εm ⇓ φ 2 2 XX− I=ε m R + X()LC − X = IZ IR tanφ = LC R 2 2 ZRXX≡ +()LC − LRC series circuit; Summary of instantaneous Current and voltages VR = IR VL = IXL VC = IXC i t()= Icos (ω ) t I XL vR t()= IRcos (ω ) t ε 1 m v t()= IXcos (ω− t ) 90 = cos I ()ωt − 90 C C ωC v tL ()= IXcosL (ω+ t ) 90ω = cos I L( ω+ ) 90 t IR tε()= v t() = ω IZcos (+ φ ) t = εcos (t ω+ ) φ ad m I XC VVLC− ωLC−1 / ω 2 2 tanφ = = ZXXX=(()R + LC - ) VR R Lagging & Leading The phase φ between the current and the driving emf depends on the relative magnitudes of the inductive and capacitive reactances. XL≡ ω ε XXLC− L m tan φ = I = 1 Z R X ≡ C ω C XL Z XL XL φ Z R φ R R Z XC XC XC XL > XC XL < XC XL = XC φ > 0 φ < 0 φ = 0 current current current LAGS LEADS IN PHASE WITH applied voltage applied voltage applied voltage Lecture 19, Act 2 2A A series RC circuit is driven by emf ε. Which of the following could be an appropriate phasor ~ diagram? V ε L εm m VC VR VR VR V C εm VC (a) (b) (c) 2B For this circuit which of the following is true? (a) The drive voltage is in phase with the current.
    [Show full text]
  • EE301 – INTRO to AC and SINUSOIDS Learning Objectives
    EE301 – INTRO TO AC AND SINUSOIDS Learning Objectives a. Compare AC and DC voltage and current sources as defined by voltage polarity, current direction and magnitude over time b. Define the basic sinusoidal wave equations and waveforms, and determine amplitude, peak to peak values, phase, period, frequency, and angular velocity c. Determine the instantaneous value of a sinusoidal waveform d. Graph sinusoidal wave equations as a function of time and angular velocity using degrees and radians e. Define effective / root mean squared values f. Define phase shift and determine phase differences between same frequency waveforms Alternating Current (AC) With the exception of short-term capacitor and inductor transients, all voltages and currents we have seen up to this point have been “DC”—i.e., fixed in magnitude. Now we shift our focus to “AC” voltage and current sources. AC sources (usually represented by lowercase e(t) or i(t)) have a sinusoidal waveform. For an AC voltage, for example, the voltage polarity changes every cycle. On the other hand, for an AC current, the current changes direction each cycle with the source voltage. Voltage and Current Conventions When e has a positive value, its actual polarity is the same as the reference polarity. When i has a positive value, its actual direction is the same as the reference arrow. 1 9/14/2016 EE301 – INTRO TO AC AND SINUSOIDS Sinusoids Since our ac waveforms (voltages and currents) are sinusoidal, we need to have a ready familiarity with the equation for a sinusoid. The horizontal scale, referred to as the “time scale” can represent degrees or time.
    [Show full text]
  • Perceptual Assignment of Opacity to Translucent Surfaces: the Role of Image Blur
    Perception, 2002, volume 31, pages 531 ^ 552 DOI:10.1068/p3363 Perceptual assignment of opacity to translucent surfaces: The role of image blur Manish Singhô, Barton L Anderson Department of Brain and Cognitive Sciences, Massachusetts Institute of Technology, Cambridge, MA 02139, USA Received 20 June 2000, in revised form 19 June 2001 Abstract. In constructing the percept of transparency, the visual system must decompose the light intensity at each image location into two componentsöone for the partially transmissive surface, the other for the underlying surface seen through it. Theories of perceptual transparency have typically assumed that this decomposition is defined quantitatively in terms of the inverse of some physical model (typically, Metelli's `episcotister model'). In previous work, we demon- strated that the visual system uses Michelson contrast as a critical image variable in assigning transmittance to transparent surfacesönot luminance differences as predicted by Metelli's model [F Metelli, 1974 Scientific American 230(4) 90 ^ 98]. In this paper, we study the contribution of another variable in determining perceived transmittance, namely, the image blur introduced by the light-scattering properties of translucent surfaces and materials. Experiment 1 demonstrates that increasing the degree of blur in the region of transparency leads to a lowering in perceived transmittance, even if Michelson contrast remains constant in this region. Experiment 2 tests how this addition of blur affects apparent contrast in the absence of perceived transparency. The results demonstrate that, although introducing blur leads to a lowering in apparent contrast, the magnitude of this decrease is relatively small, and not sufficient to explain the decrease in perceived transmittance observed in experiment 1.
    [Show full text]