DOCSLIB.ORG

IEEE 802.3 Working Group Standards Status November 14Th, 2005

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
IEEE 802.3 Working Group Standards Status November 14Th, 2005 IEEE 802.3 Working Group Standards Status November 14th, 2005 ISO/IEC approved ISO/IEC 8802-3:2000 ANSI/IEEE Std 802.3-2005 (Was IEEE project 802.3REVam) th .3 Network To be published as 5 Books (Sections) Target publication date – 9 December Policy and Systems Section 1 Section 2 Section 3 Section 4 Section 5 Procedures Tutorial Clause 1 to 20 Clause 21 to 33 Clause 34 to 43 Clause 44 to 54 Clause 56 to 67 Approved Published Annex A to H Annex 22A to 32A Annex 36A to 43C Annex 44A to 50A Annex 58A to 67A Nov-97 Jun-95 CSMA/CD Overview 100Mb/s Overview 1000Mb/s Overview 10Gb/s Overview Subscriber Access MAC MII GMII MDC/MDIO Overview PLS/AUI 100BASE-T2 1000BASE-X AutoNeg XGMII OAM 10BASE5 MAU 100BASE-T4 1000BASE-SX XAUI Multi-point MAC 10BASE2 MAU 100BASE-TX 1000BASE-LX XSBI Control ANSI/IEEE 10BROAD36 MAU 100BASE-FX 1000BASE-CX 10GBASE-SR 100BASE-LX10 approved 10BASE-T MAU 100Mb/s Repeater 1000BASE-T 10GBASE-LR 100BASE-BX10 10BASE-F MAUs 100Mb/s Topology 1000Mb/s Repeater 10GBASE-ER 1000BASE-LX10 10Mb/s Repeater 1000Mb/s Topology 10GBASE-SW 1000BASE-BX10 10Mb/s Topology MAC Control 10GBASE-LW 1000BASE-PX10 IEEE Std 1802.3-2001 Auto Negotiation Link Aggregation 10GBASE-EW 1000BASE-PX20 Conformance Test 1BASE5 Management 10GBASE-LX4 10PASS-TS DTE & MAU Mgmt 10GBASE-CX4 2BASE-TL 10BASE-T Repeater Mgmt Subscriber Access Published 19-Oct-01 Maintenance 7 Topology Maintenance 6 DTE Power Maintenance 6 Maintenance 7 Maintenance 6 Maintenance 7 Maintenance 7 802.3 .3an .3aq WG 10GBASE-T 10GBASE-LRM .3as in Task Force Task Force Frame .3ap process (B. Booth) (D. Cunningham) .3ar Extension .3-2005/Cor 1 Backplane WG recirc WG recirc Congestion Task Force Power over Ethernet .3at management (K. Daines) Ethernet Isol Task Force DTE Power Task Force WG recirc Residential Task Force (A. Healy) Enhancements (K. Daines) Ethernet (D. Law) 802.3 WG WG Ballot Task Force Draft preview Study Group Draft preview new (M. McCormack) (M. Teener) work items IEEE 802.3 Working Group Standards Status November 14th, 2005 ISO/IEC approved ISO/IEC 8802-3:2000 ANSI/IEEE Std 802.3-2002 Published 8-Mar-02 .3 Network IEEE Std 1802.3-2001 Published as 3 Books (Sections) Conformance Test Policy and Systems Section 1 Section 2 Section 3 10BASE-T Procedures Tutorial Clauses 1 to 20 Clauses 21 to 32 Clauses 34 to 43 Approved Published Published 19-Oct-01 Annexes A to H Annexes 22A to 32A Annexes 36A to 43C Nov-97 Jun-95 CSMA/CD Overview 100Mb/s Overview 1000Mb/s Overview IEEE Std 802.3af-2003 MAC MII GMII IEEE Std 802.3ae-2002 DTE Power via MDI PLS/AUI 100BASE-T2 1000BASE-X AutoNeg 10Gb/s Ethernet 10BASE5 MAU 100BASE-T4 1000BASE-SX Published 18-Jun-03 10BASE2 MAU 100BASE-TX 1000BASE-LX ANSI/IEEE 10Gb/s Overview 10BROAD36 MAU 100BASE-FX 1000BASE-CX approved XGMII XAUI IEEE Std 802.3aj-2003 10BASE-T MAU 100Mb/s Repeater 1000BASE-T XBSI MDIO 10BASE-F MAUs 100Mb/s Topology 1000Mb/s Repeater 10GBASE-LX4 Maintenance 7 10Mb/s Repeater 1000Mb/s Topology 10GBASE-ER/LR/SR 10Mb/s Topology MAC Control Corrections to Published 26-Sep-03 Auto Negotiation Link Aggregation IEEE Std 802.3ae-200210GBASE-EW/LW/SW 1BASE5 Management Published 30-Aug-02 IEEE Std 802.3ak-2004 DTE & MAU Mgmt 10GBASE-CX4 Repeater Mgmt IEEE Std 802.3ah-2004 Ethernet in the First Mile Maintenance 6 changes Published 1-Mar-04 Corrections to Published 7-Sep-04 Corrections to IEEE Std 802.3-2002 IEEE Std 802.3ak-2004 802.3 .3an .3aq WG 10GBASE-T 10GBASE-LRM .3as in Task Force Task Force Frame .3ap process (B. Booth) (D. Cunningham) .3ar Extension .3-2005/Cor 1 Backplane WG recirc WG recirc Congestion Task Force Power over Ethernet .3at management (K. Daines) Ethernet Isol Task Force DTE Power Task Force WG recirc Residential Task Force (A. Healy) Enhancements (K. Daines) Ethernet (D. Law) 802.3 WG WG Ballot Task Force Draft preview Study Group Draft preview new (M. McCormack) (M. Teener) work items.
Load more

Recommended publications
  • Gigabit Ethernet - CH 3 - Ethernet, Fast Ethernet, and Gigabit Ethern
    Switched, Fast, and Gigabit Ethernet - CH 3 - Ethernet, Fast Ethernet, and Gigabit Ethern.. Page 1 of 36 [Figures are not included in this sample chapter] Switched, Fast, and Gigabit Ethernet - 3 - Ethernet, Fast Ethernet, and Gigabit Ethernet Standards This chapter discusses the theory and standards of the three versions of Ethernet around today: regular 10Mbps Ethernet, 100Mbps Fast Ethernet, and 1000Mbps Gigabit Ethernet. The goal of this chapter is to educate you as a LAN manager or IT professional about essential differences between shared 10Mbps Ethernet and these newer technologies. This chapter focuses on aspects of Fast Ethernet and Gigabit Ethernet that are relevant to you and doesn’t get into too much technical detail. Read this chapter and the following two (Chapter 4, "Layer 2 Ethernet Switching," and Chapter 5, "VLANs and Layer 3 Switching") together. This chapter focuses on the different Ethernet MAC and PHY standards, as well as repeaters, also known as hubs. Chapter 4 examines Ethernet bridging, also known as Layer 2 switching. Chapter 5 discusses VLANs, some basics of routing, and Layer 3 switching. These three chapters serve as a precursor to the second half of this book, namely the hands-on implementation in Chapters 8 through 12. After you understand the key differences between yesterday’s shared Ethernet and today’s Switched, Fast, and Gigabit Ethernet, evaluating products and building a network with these products should be relatively straightforward. The chapter is split into seven sections: l "Ethernet and the OSI Reference Model" discusses the OSI Reference Model and how Ethernet relates to the physical (PHY) and Media Access Control (MAC) layers of the OSI model.
    [Show full text]
  • Ethernet and Wifi
    Ethernet and WiFi hp://xkcd.com/466/ CSCI 466: Networks • Keith Vertanen • Fall 2011 Overview • Mul?ple access networks – Ethernet • Long history • Dominant wired technology – 802.11 • Dominant wireless technology 2 Classic Ethernet • Ethernet – luminferous ether through which electromagne?c radiaon once thought to propagate – Carrier Sense, Mul?ple Access with Collision Detec?on (CSMA/CD) – IEEE 802.3 Robert Metcalfe, co- inventor of Ethernet 3 Classic Ethernet • Ethernet – Xerox Ethernet standardized as IEEE 802.3 in 1983 – Xerox not interested in commercializing – Metcalfe leaves and forms 3Com 4 Ethernet connec?vity • Shared medium – All hosts hear all traffic on cable – Hosts tapped the cable – 2500m maximum length – May include repeaters amplifying signal – 10 Mbps bandwidth 5 Classic Ethernet cabling Cable aSer being "vampire" tapped. Thick Ethernet cable (yellow), 10BASE-5 transceivers, cable tapping tool (orange), 500m maximum length. Thin Ethernet cable (10BASE2) with BNC T- connector, 185m maximum length. 6 Ethernet addressing • Media Access Control address (MAC) – 48-bit globally unique address • 281,474,976,710,656 possible addresses • Should last ?ll 2100 • e.g. 01:23:45:67:89:ab – Address of all 1's is broadcast • FF:FF:FF:FF:FF:FF 7 Ethernet frame format • Frame format – Manchester encoded – Preamble products 10-Mhz square wave • Allows clock synch between sender & receiver – Pad to at least 64-bytes (collision detec?on) Ethernet 802.3 AlternaWng 0's 48-bit MAC and 1's (except addresses SoF of 11) 8 Ethernet receivers • Hosts listens to medium – Deliver to host: • Any frame with host's MAC address • All broadcast frames (all 1's) • Mul?cast frames (if subscribed to) • Or all frames if in promiscuous mode 9 MAC sublayer • Media Access Control (MAC) sublayer – Who goes next on a shared medium – Ethernet hosts can sense if medium in use – Algorithm for sending data: 1.
    [Show full text]
  • Gigabit Ethernet
    Ethernet Technologies and Gigabit Ethernet Professor John Gorgone Ethernet8 Copyright 1998, John T. Gorgone, All Rights Reserved 1 Topics • Origins of Ethernet • Ethernet 10 MBS • Fast Ethernet 100 MBS • Gigabit Ethernet 1000 MBS • Comparison Tables • ATM VS Gigabit Ethernet •Ethernet8SummaryCopyright 1998, John T. Gorgone, All Rights Reserved 2 Origins • Original Idea sprang from Abramson’s Aloha Network--University of Hawaii • CSMA/CD Thesis Developed by Robert Metcalfe----(1972) • Experimental Ethernet developed at Xerox Palo Alto Research Center---1973 • Xerox’s Alto Computers -- First Ethernet Ethernet8systemsCopyright 1998, John T. Gorgone, All Rights Reserved 3 DIX STANDARD • Digital, Intel, and Xerox combined to developed the DIX Ethernet Standard • 1980 -- DIX Standard presented to the IEEE • 1980 -- IEEE creates the 802 committee to create acceptable Ethernet Standard Ethernet8 Copyright 1998, John T. Gorgone, All Rights Reserved 4 Ethernet Grows • Open Standard allows Hardware and Software Developers to create numerous products based on Ethernet • Large number of Vendors keeps Prices low and Quality High • Compatibility Problems Rare Ethernet8 Copyright 1998, John T. Gorgone, All Rights Reserved 5 What is Ethernet? • A standard for LANs • The standard covers two layers of the ISO model – Physical layer – Data link layer Ethernet8 Copyright 1998, John T. Gorgone, All Rights Reserved 6 What is Ethernet? • Transmission speed of 10 Mbps • Originally, only baseband • In 1986, broadband was introduced • Half duplex and full duplex technology • Bus topology Ethernet8 Copyright 1998, John T. Gorgone, All Rights Reserved 7 Components of Ethernet • Physical Medium • Medium Access Control • Ethernet Frame Ethernet8 Copyright 1998, John T. Gorgone, All Rights Reserved 8 CableCable DesignationsDesignations 10 BASE T SPEED TRANSMISSION MAX TYPE LENGTH Ethernet8 Copyright 1998, John T.
    [Show full text]
  • Modern Ethernet
    Color profile: Generic CMYK printer profile Composite Default screen All-In-One / Network+ Certification All-in-One Exam Guide / Meyers / 225345-2 / Chapter 6 CHAPTER Modern Ethernet 6 The Network+ Certification exam expects you to know how to • 1.2 Specify the main features of 802.2 (Logical Link Control) [and] 802.3 (Ethernet): speed, access method, topology, media • 1.3 Specify the characteristics (for example: speed, length, topology, and cable type) of the following cable standards: 10BaseT and 10BaseFL; 100BaseTX and 100BaseFX; 1000BaseTX, 1000BaseCX, 1000BaseSX, and 1000BaseLX; 10GBaseSR, 10GBaseLR, and 10GBaseER • 1.4 Recognize the following media connectors and describe their uses: RJ-11, RJ-45, F-type, ST,SC, IEEE 1394, LC, MTRJ • 1.6 Identify the purposes, features, and functions of the following network components: hubs, switches • 2.3 Identify the OSI layers at which the following network components operate: hubs, switches To achieve these goals, you must be able to • Define the characteristics, cabling, and connectors used in 10BaseT and 10BaseFL • Explain how to connect multiple Ethernet segments • Define the characteristics, cabling, and connectors used with 100Base and Gigabit Ethernet Historical/Conceptual The first generation of Ethernet network technologies enjoyed substantial adoption in the networking world, but their bus topology continued to be their Achilles’ heel—a sin- gle break anywhere on the bus completely shut down an entire network. In the mid- 1980s, IBM unveiled a competing network technology called Token Ring. You’ll get the complete discussion of Token Ring in the next chapter, but it’s enough for now to say that Token Ring used a physical star topology.
    [Show full text]
  • How to Accelerate Your Internet
    How To Accelerate Your Internet A practical guide to Bandwidth Management and Optimisation using Open Source Software How To Accelerate Your Internet For more information about this project, visit us online at http://bwmo.net/ Editor: Flickenger R. Associate Editors: Belcher M., Canessa E., Zennaro M. Publishers: INASP/ICTP © 2006, BMO Book Sprint Team First edition: October 2006 ISBN: 0-9778093-1-5 Many designations used by manufacturers and vendors to distinguish their products are claimed as trademarks. Where those designations appear in this book, and the authors were aware of a trademark claim, the designations have been printed in all caps or initial caps. All other trademarks are property of their respective owners. The authors and publisher have taken due care in preparation of this book, but make no expressed or implied warranty of any kind and assume no responsibil- ity for errors or omissions. No liability is assumed for incidental or consequen- tial damages in connection with or arising out of the use of the information con- tained herein. This work is released under the Creative Commons Attribution-ShareAlike 2.5 license. For more details regarding your rights to use and redistribute this work, see http://creativecommons.org/licenses/by-sa/2.5/ Contents Preface ix About This Book xi Introduction 1 Bandwidth, throughput, latency, and speed.............................................................................. 2 Not enough to go around........................................................................................................
    [Show full text]
  • Cheetahub Classic-2041 Quick Installation Guide
    CheetaHub Classic-2041 Quick Installation Guide EH2041S E0898-R02 Copyright © 1998 by Accton Technology Corporation. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Accton Technology Corporation. Accton makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice. Accton reserves the right to make revisions to this publication CheetaHub Classic-2041 without obligation to notify any person or entity of any such changes. Smart Ethernet Hub with 16 10BASE-T (RJ-45) ports, 1 10BASE2 (BNC) port, and 1 AUI port International Headquarters USA Headquarters No. 1 Creation Road III, P.O. Box 51420 Science-based Industrial Park Irvine, CA 92619-1420 Hsinchu 300, Taiwan, R.O.C. Phone Numbers - Phone: 886-3-5770-270 Sales: 888-398-2101 or 949-707-4800 FAX: 886-3-5770-267 Support: 888-398-4101 or 949-707-4847 BBS: 886-3-5770-654 RMA: 888-398-3101 or 949-707-4828 Internet: [email protected] FAX: 949-707-2460 Accton is a trademark of Accton Technology Corporation. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. EH2041S E0898-R02 CheetaHub Classic-2041 Quick Installation Guide Contents Introduction The CheetaHub Classic-2041 includes 16 RJ-45 ports, 1 BNC port for connection to thin Ethernet (10BASE2), and 1 Introduction 1 AUI port for connection to a variety of media types including 10BASE5 or fiber (using a suitable transceiver).
    [Show full text]
  • 10Mb/S Ethernet 10BASE2/AUI Adapter
    10Mb/s Ethernet 10BASE2/AUI Adapter 32-Bit PCI 28F512 10BASE2 64Kbyte BIOS memory PMC Front AMD 79C970A AUI to 10BASE2 Panel Ethernet +5V MAU Controller +5 to -9V DC-to-DC DSUB-15 (AUI) 10Mb/s "AUI" Rear Rear I/O E-Net Interface I/O PN4 AUI ISOLATION +12V The 10 Mb/s Ethernet Adapter is field-selectable for The AUI interface provides resettable fuse-protected either AUI (10BASE5) or Thinnet (10BASE2) opera- +12V on the DB-15 connector for powering an exter- tion. nal MAU. When operating in AUI mode, the +12V power to the AUI defeats the isolation barrier, and the An AMD 79C970A Ethernet controller provides a 10 PMC system Ground is tied to the external MAU Mb/s Attachment Unit Interface (AUI) for connection to Ground. Media Attachment Units (MAU) either out the rear of the PMC or out the PMC front panel. A 15-pin D- The board features a FLASH memory for storing an Subminiature female is used on the front PMC panel, on-board BIOS. A 28F512 chip is used, providing up complete with the standard MAU retaining slide latch. to 64Kbytes of BIOS storage. The 28F512 chip is installed in a PLCC socket on the PMC card. The AUI interface is available at the PMC “PN4” con- nector for rear connection to the “a” and “c” rows of a Four activity and status LEDs are visible from the PMC VMEbus P2 connector. If the VMEbus host processor front panel. Interrupts are posted on the PCI bus us- adheres to the proposed IEEE 1386 routing from PN4 ing Interrupt Request “A” (INTA).
    [Show full text]
  • Ethernet (IEEE 802.3)
    Computer Networking MAC Addresses, Ethernet & Wi-Fi Lecturers: Antonio Carzaniga Silvia Santini Assistants: Ali Fattaholmanan Theodore Jepsen USI Lugano, December 7, 2018 Changelog ▪ V1: December 7, 2018 ▪ V2: March 1, 2017 ▪ Changes to the «tentative schedule» of the lecture 2 Last time, on December 5, 2018… 3 What about today? ▪Link-layer addresses ▪Ethernet (IEEE 802.3) ▪Wi-Fi (IEEE 802.11) 4 Link-layer addresses 5 Image source: https://divansm.co/letter-to-santa-north-pole-address/letter-to-santa-north-pole-address-fresh-day-18-santa-s-letters/ Network adapters (aka: Network interfaces) ▪A network adapter is a piece of hardware that connects a computer to a network ▪Hosts often have multiple network adapters ▪ Type ipconfig /all on a command window to see your computer’s adapters 6 Image source: [Kurose 2013 Network adapters: Examples “A 1990s Ethernet network interface controller that connects to the motherboard via the now-obsolete ISA bus. This combination card features both a BNC connector (left) for use in (now obsolete) 10BASE2 networks and an 8P8C connector (right) for use in 10BASE-T networks.” https://en.wikipedia.org/wiki/Network_interface_controller TL-WN851ND - WLAN PCI card 802.11n/g/b 300Mbps - TP-Link https://tinyurl.com/yamo62z9 7 Network adapters: Addresses ▪Each adapter has an own link-layer address ▪ Usually burned into ROM ▪Hosts with multiple adapters have thus multiple link- layer addresses ▪A link-layer address is often referred to also as physical address, LAN address or, more commonly, MAC address 8 Format of a MAC address ▪There exist different MAC address formats, the one we consider here is the EUI-48, used in Ethernet and Wi-Fi ▪6 bytes, thus 248 possible addresses ▪ i.e., 281’474’976’710’656 ▪ i.e., 281* 1012 (trillions) Image source: By Inductiveload, modified/corrected by Kju - SVG drawing based on PNG uploaded by User:Vtraveller.
    [Show full text]
  • Cheetahub Classic-2040 Quick Installation Guide
    CheetaHub Classic-2040 Quick Installation Guide EN2040 E1297-R02 150003-102 Copyright © 1997 by Accton Technology Corporation. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Accton Technology Corporation. Accton makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice. Accton reserves the right to make revisions to this publication CheetaHub Classic-2040 without obligation to notify any person or entity of any such changes. Smart Ethernet Hub with 8 10BASE-T (RJ-45) Ports and 1 BNC Port International Headquarters USA Headquarters No. 1 Creation Road III, 1962 Zanker Road Science-based Industrial Park San Jose, CA 95112 Hsinchu 300, Taiwan, R.O.C. Phone: 408-452-8900 Phone: 886-3-5770-270 FAX: 408-452-8988 FAX: 886-3-5770-267 BBS: 408-452-8828 BBS: 886-3-5770-654 FAST FAX: 408-452-8811 Internet: [email protected] Accton, CheetaHub and SmartWatch are trademarks or registered trademarks of Accton Technology Corporation. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. EN2040 E1297-R02 150003-102 CheetaHub Classic-2040 Quick Installation Guide Contents Introduction The CheetaHub Classic-2040 includes 8 RJ-45 ports and 1 BNC port for connection to thin Ethernet (10BASE2). The hub Introduction 1 also has an indicator panel that includes utilization and link/ traffic LEDs to provide easy monitoring of hub conditions.
    [Show full text]
  • Magnum 200X Two-Port Repeaters Installation and User Guide (04/99)
    Magnum 200X Two-Port Repeaters Corporate Headquarters GarrettCom, Inc. 47823 WestingHouse Drive Fremont, CA 94539 Phone (510) 438-9071 FAX (510) 438-9072 WWW: http://www.garrettcom.com email: [email protected] Magnum 200X eu i PWR RX COL JAB GARRETT - + PWR [12VDC, 1A] Magnum 20X FWD Two-Port Repeater FWD LINK I X GARRETT Installation and User Guide GARRETT GARRETT Magnum 200X Two-Port Repeaters Installation and User Guide (04/99) Magnumä 200X Two-Port Repeaters Installation and User Guide Part #: 84-00022 (R04/99) Trademarks Ethernet is a trademark of Xerox Corporation Velcro is a trademark of Velcro U.S.A. UL is a registered trademark of Underwriters Laboratories Magnum is a trademark and Personal Hub is a registered trademark of Garrett Communications, Inc. Important: Magnum 200X Two-Port Repeaters contain no user serviceable parts. Attempted service by unauthorized personnel shall render any and all warranties null and void. If problems are experienced with a Magnum 200X, consult Section 5, Troubleshooting, of this User Guide. Ó1999 Garrett Communications, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Garrett Communications, Inc. Printed in the United States of America. GARRETT Magnum 200X Two-Port Repeaters Installation and User Guide (04/99) Contacting Garrett Communications Please use the mailing address, phone and fax numbers, and Internet address listed below. GarrettCom, Inc. 47823 Westinghouse Drive Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 WWW: http://www.garrettcom.com email: [email protected] Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses and can radiate frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer's instructions, may cause interference to radio communication.
    [Show full text]
  • Lecture 7 Datalink – Ethernet, Home Ethernet Physical Refresher
    Lecture 7 Datalink – Ethernet, Home David Andersen School of Computer Science Carnegie Mellon University 15-441 Networking, Spring 2005 http://www.cs.cmu.edu/~srini/15-441/S05 1 Ethernet Physical Refresher 10Mhz signal (baseband modulation) Nyquist limit says we should be able to get 20 Mbits/s from that. Manchester encoding solves runs of 1s and 0s problem » Wastes 1/2 of the possible data rate - back to 10Mbps 2 Page ‹#› Ethernet Physical Layer 10Base2 standard based on host host host host thin coax. » Thick coax no longer used » Nodes are connected using thin coax cables and “T” connectors Host in a bus topology 10-BaseT uses twisted pair and hubs. » Hub acts as a concentrator The two designs have the same protocol properties. host host host host » Key: electrical connectivity between all nodes » Deployment is different Hub 3 Ethernet over Time Hub Aloha Ethernet on coax ?baseT with hub packet radio (twisted pair) 10base-2 (thinnet) 10base-5 (thicknet) Switch ?baseT with switch (point to point links) 4 Page ‹#› Datalink Layer Architectures Packet forwarding. Media access Error and flow control. control. Scalability. 5 Multiple Access Protocols Prevent two or more nodes from transmitting at the same time over a broadcast channel. » If they do, we have a collision, and receivers will not be able to interpret the signal Several classes of multiple access protocols. » Partitioning the channel, e.g. frequency-division or time division multiplexing – With fixed partitioning of bandwidth – not flexible » Taking turns, e.g. token-based, reservation-based protocols, polling based » Contention based protocols, e.g.
    [Show full text]
  • Physical Layer Standards
    ELEC3030 (EL336) Computer Networks S Chen Physical Layer Standards • Physical layer: concern with transmission of raw bit stream over physical medium • A physical layer “protocol” or standard deals with mechanical, electrical and procedural characteristics to access physical medium • Parts of a physical layer are completely related to the medium and others are independent of the medium → useful thinking physical layer as two sublayers – “Medium dependent sublayer”: specifies the medium, physical connectors, related mechanical and electrical characteristics – “Medium independent sublayer”: covers line coding – how to transmit 0 and 1 bits; synchronisation – sender and receiver clocks must be synchronised to know the start/end of a bit, usually by organising block of bits into a frame; other issues not directly linked to the medium Do not confuse layer-1 framing with framing in layer-2: It is really concerned with how to reliably transmit bit stream (timing), while layer-2 framing includes some other higher functional purposes 25 ELEC3030 (EL336) Computer Networks S Chen IEEE 802.3 Ethernet • A bus LAN, “medium dependent” part of physical layer specifies things related to the medium: Controller name (a) 10Base5 (b) 10Base2 (c) 10Base-T Controller Twisted pair Transceiver medium thick coax cable thin coax cable twisted pair Transceiver + controller cable max. length 500 m 200 m 100 m Core Vampire tap nodes 100 30 1024 data rate 10 Mbps 10 Mbps 10 Mbps Transceiver Connector Hub (a) (b) (c) • “Medium independent”: the Manchester encoding is
    [Show full text]