Nokia N93-1 N93 User guide

Nota: La traducción en español de este manual inicia en la Página 127.

9255380 ISSUE 1 EN 1 DECLARATION OF CONFORMITY This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for Hereby, NOKIA CORPORATION declares that this RM-55 product is in compliance personal and noncommercial use in connection with information which has been with the essential requirements and other relevant provisions of Directive 1999/5/EC. encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged A copy of the Declaration of Conformity can be found at in a personal and noncommercial activity and (ii) for use in connection with http://www.nokiausa.com/phones/declaration_of_conformity/. MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that relating to promotional, internal, and commercial uses may be obtained from MPEG LA, LLC. See http://www.mpegla.com. The crossed-out wheeled bin means that within the European Union the Nokia operates a policy of ongoing development. Nokia reserves the right to make product must be taken to separate collection at the product end-of-life. changes and improvements to any of the products described in this document This applies to your device but also to any enhancements marked with this without prior notice. symbol. Do not dispose of these products as unsorted municipal waste. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF For more information, see product Eco-Declaration or country specific DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT information at www.nokiausa.com. DAMAGES HOWSOEVER CAUSED. © 2006 Nokia. All rights reserved. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED ‘AS IS’. EXCEPT AS REQUIRED Nokia, Nokia Connecting People, Nseries, N93, Visual Radio, and Pop-Port are BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY mark of Nokia corporation. Other product and company names mentioned herein AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, may be trademarks or tradenames of their respective owners. RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. The availability of particular products may vary by region. Please check with the This product includes software licensed from Nokia dealer nearest to you. Software Ltd (c) 1998-2006. Symbian and Symbian OS EXPORT CONTROLS are trademarks of Symbian Ltd. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. FCC / INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone Java™ and all Java-based marks are trademarks or registered in close proximity to receiving equipment). The FCC or Industry Canada can require trademarks of Sun Microsystems, Inc. you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one 15 of the FCC rules. Operation is subject to the following two conditions: (1) This or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. device may not cause harmful interference, and (2) this device must accept any Other patents pending. interference received, including interference that may cause undesired operation. Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, Any changes or modifications not expressly approved by Nokia could void the user's 5016009, 5126739, 5146221, and 5414425. Other patents pending. authority to operate this equipment. Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved. ISSUE 1 EN, 9255380

2 The third-party applications provided with your device may have been created and BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE may be owned by persons or entities not affiliated with or related to Nokia. Nokia PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE does not own the copyrights or intellectual property rights to the third-party MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE applications. As such, Nokia does not take any responsibility for end-user support, THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR functionality of the applications, or the information in the applications or these WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES materials. Nokia does not provide any warranty for the third-party applications. OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.

3 Contents 44

4 Contents uoil...... 22 ...... Tutorial 22 Help...... 21 ...... manager File 19 card...... Memory 19 browser...... Web 18 network...... Home 17 LAN...... Wireless 17 straps...... cover lens and Wrist 17 ...... Headset 16 Clock...... 16 ...... control loudspeaker and Volume 16 lock Keypad (keyguard)...... 15 indicators...... Essential 14 device...... another from content Transfer 14 ...... Settings 13 Shortcuts...... 11 ...... Modes Nokia N93...... 11 Your connected...... 10 Get safety...... 7 your For Contents rt n edmsae ...... 44 messages send and Write text...... 42 Write Messaging...... 41 ...... 40 files up Back ...... 39 print Image ...... 37 player Music ...... 37 Media applications sharing...... 34 Online ...... 33 online Print ...... 33 Albums Presentations...... 33 ...... 33 mode out TV show...... 32 Slide ...... 32 images Edit clips...... 30 video Edit clips...... 30 video and images View Gallery...... 29 ...... 25 pictures Take videos...... 23 Record Camera...... 23 e etns...... 69 settings Web ...... 69 aEnd connection items...... 69 purchase and Download Browse...... 68 ...... 67 security Connection view...... 67 Bookmarks point...... 67 access Web 67 ...... Services groups...... 66 contact Create contacts...... 65 for tones ringing Add ...... 65 Copy contacts numbers...... 64 and names Save 64 ...... Contacts (phonebook) Log...... 61 call...... 60 a decline or Answer service)...... 57 (network Video sharing service)...... 56 (network Video calls ...... 54 Voice calls 54 calls...... Make settings...... 49 Messaging card...... 49 SIM a on messages View Mailbox...... 47 messages...... 46 Inbox—receive oe ...... 89 ...... Modem 89 Device manager...... 88 ...... manager Connection 87 ...... Synchronization 84 network...... Home 84 ...... connection Infrared connectivity...... 80 cable...... Data 80 PC connections...... 80 Connectivity...... 79 ...... Games 78 ...... director Movie 77 ...... Player Flash 75 ...... RealPlayer 73 service)...... (network Radio Visual 73 ...... own My 72 settings...... Calendar 72 entries...... calendar your Manage 72 ...... views Calendar 71 requests...... Meeting 71 entries...... calendar Create 71 Calendar...... 80 ......

5 Contents 6 Contents Media key...... 98 Media Tools...... 98 ...... 97 Active mode standby device...... 96 your look of the Change tones...... 95 Profiles—set device...... 95 your Personalize reader...... 94 Barcode reader...... 93 Adobe Quickoffice...... 91 Zip manager...... 91 ...... 90 Notes Calculator...... 90 Converter...... 90 Recorder...... 90 Office...... 90 ciainky o oyih-rtce ie ...... 110 files copyright-protected for keys Activation ...... 108 manager Application commands...... 108 Voice ...... 108 configuration TV 98 ...... Settings Index...... 123 ...... 122 Information Technical safety information...... 119 Additional and maintenance...... 118 Care guidelines...... 117 battery Nokia authentication ...... 116 information Battery ...... 116 safety Product Q&A...... 112 Troubleshooting...... 112 further information. further for guide user complete the Read illegal. or dangerous be may them following Not guidelines. simple these Read For your safety interference in aircraft. in interference cause can devices Wireless restrictions. IN AIRCRAFT OFF SWITCH equipment. medical near off device the Switch restrictions. HOSPITALS IN OFF SWITCH performance. affect could which interference, to susceptible INTERFERENCE safety. be road should driving while the vehicle while driving. Your first consideration laws. Always keep your hands free to operate ROAD SAFETY COMES FIRST or danger. interference it may when cause or prohibited is use phone wireless on when SAFELY ON SWITCH All wireless devices may be may devices wireless All Do not switch the device device the switch not Do Follow any any Follow Follow any any Follow Obey all local local all Obey water-resistant. Keep it dry. it Keep water-resistant. WATER-RESISTANCE products. incompatible connect not Do batteries. and enhancements approved ENHANCEMENTS AND BATTERIES product. this or repair install may SERVICE QUALIFIED unnecessarily. antenna the touch not Do documentation. in the product as explained USE SENSIBLY in progress. is blasting where device the use not Do restrictions. SWITCH OFF NEAR BLASTING fuel orchemicals. near use not Do point. refueling a at device the SWITCH OFF WHEN REFUELING Use onlythe in normal position Only qualified personnel personnel qualified Only Your device is not not is device Your Follow any any Follow Do notuse Use only only Use

7 For your safety 8 For your safety copied, copied, transferred, or modified, forwarded. being from content other and tones), ringing (including music images, some prevent may protections Copyright copyrights. others, including of rights and legitimate privacy customs, local respect and laws all obey device, this in features the using When networks. about provid service your Contact use on the GSM 900, 1800, 1900, and UMTS2100 networks. for approved is guide this in described device wireless The device your About BACK-UP COPIES COPIES BACK-UP until given permission to do so. do to permission given until press then number, emergency the Enter mode. needed as times many as to clear the displayand return to the standby Press mode. open fold- is in the only keypad active The service. in and on switched is device of the function EMERGENCY CALLS products. incompatible connect not Do instructions. safety detailed for guide user its read device, other any to connecting DEVICESCONNECTING TO OTHER information stored in your device. your in stored information important all of record written a keep or copies . Give your location. Do not end the call call the end not Do location. your . Give er for more information information more for er Remember to make back-up toback-up make Remember Ensure the phone the phone Ensure When as youaswould with any internetsite. should take the same precautions,for security or content, you them, If you choose to access sites. for these liability any or assume does Nokia Nokia. not endorse with affiliated for or may allow access to sites provided by third parties not preinstalled or links bookmarks some have may device Your facility. service authorized is not itproperly, device working take to the nearest the suspect you If is normal. condition this cases, most In feel warm. may device the data connection, high-speed or session sharing active video as an such operation, During modified. or be viewed can formats file all Not 2003). and OfficeXP, 97, 2000, Excel (Microsoft and PowerPoint, Word, of Microsoft features common supports device This regular a with service update and using firewall a application. security of your device, consider installing antivirus software installations only from trustworthy sources. To increase the accept and content, download requests, connectivity harmful content. Exercise caution and open messages, accept to viruses, malicious messages and applications, and other of connectivity. Like computers, your device may be exposed Your device supports internet use may cause interference or danger. or interference cause may use device wireless on when device the switch not Do than alarm the clock, the device must be switchedon. Warning: To use any features in this device, other other device, in this features any To use connections and other methods provider for more information. more for provider your service Contact icons. and order, menu names, menu in changes as such configuration special a have also may device Your menu. device on your appear will not features these so,If device. your in activated not or disabled be Your service provider may haverequested certain that features States. United the in available not is Nokia Club Also, function. they how in limitedRadio,may Visual features,Other be such as America. of States United the in networks the with compatible talk, to Push Sharing, Video Calls, Video instance, For device. in this offered features all service networks in many countries. Not all support networks wireless with to be compatible is designed device Nokia This service). (network by guide this in designated are features language-dependent charactersservices. and Network all support not may networks some For instance, services. have limitations thataffect how you can use network may networks Some apply. will charges what explain and instructions you give can provider service Your services. network the use can you before provider service your with networks may require that you make specific arrangements other networks; all on available be not are features These features. network special require features the of Many provider. To use the phone you must have service from a wireless service Network services and Instant messaging are not any enhancement, grasp and pull the plug, not the cord. not plug, the pull grasp and enhancement, any of cord the power disconnect you dealer. When your with check please enhancements, approved of availability For The battery intended for usewith this device isBP-6M. charger when used with thecharger CA-44 adapter. or LCH-12 LCH-9, LCH-8, ACP-12, ACP-9, ACP-8, ACP-7, powerfrom a DC-4,AC-3, orAC-4 charger, and fromAC-1, an with supplied when use for is intended device This device. Check the model number ofany charger beforeuse with this battery. the removing before charger the disconnect and off device the switch Always Enhancements, batteries, and chargers provider provider or other vendor. service the be may This vendor. card SIM your contact services, card SIM on using information and For availability technologies. these for support network require MMS, over or browser the using downloading and content e-mail, browsing, as MMS, features of device, this such Some on TCP/IP protocols. run (HTTP protocols 2.0 WAP and SSL) supports This device that be dangerous. be and may warranty, or approval any invalidate may types other any of use The model. particular this with use for Nokia by approved enhancements Warning: Use only batteries, chargers, and chargers, batteries, only Use

9 For your safety 10 Get connected Get connected information, for information, example. "MemorySee card p. tool" 20. to back up data card transfer or microSD a compatible Use 108. p. configuration" "TV See TV. a compatible to connect to CA-64U Cable Video Nokia Use 80. cable" p. "Data See PCs. printers and as such devices, NokiaConnectivityUse connect Cable to compatible CA-53 to 88. p. LAN" "Wireless See devices. enabled wirelessUse a LAN to connect to theinternet and WLAN 84. p. example. devices, "InfraredSee for compatible connection" data between synchronize and transfer to infrared Use 80. p. connectivity" "Bluetooth See enhancements. compatible to connect and files transfer to example, for technology, Bluetooth Use Nokia N93" p.11. "Your See networks. and 2G the on device your Use clip, it continues to play. to continues it clip, a sound to listen to player the using are If you p. 99. display", "Cover see settings, the change To connected. is headset compatible a or use is in loudspeaker the end, unless calls Ongoing up. and deactivates display lights the cover display main the closed, is fold the When Fold closed mode is activated. mode a before time-out short is a There display. axis swing turn the fold and the the modes, between To switch videos. and images foryour viewing and view pictures, and taking video recording for image use, phone mobile traditional for open fold carrying, for closed fold uses: different for optimized are that modes mechanical four has device Your Modes N93. Nokia as to referred Hereinafter N93-1 Nokia number: Model Your Nokia N93 In the cover display settings, select note. Incomingand a tonetheirby calls indicated are normal display. main on the message the view fold, and the open messages, multimedia of received objects image the and text and messages text received To view displayed. also are messages received new Calendar clock and alarmsnotes andfor missed calls and device. the of side on the key scroll the use channels, new seek and channel, au the To turn display. cover the on shown is information This information. location and frequency, name, station with stations preset several store can You display. cover on the shown is not content visual the mode, fold-closed the in Radio Visual using are you If or down. up volume the turn and clip, sound previous or next play the pause, play, to keys scroll side the Use displayed. are information and bars to track clip,a volume sound Normal of and the the name active indicators, profile (if other than status information, time indicators, battery and strength signal the display, mode standby the On information. status and clock provides display cover the mode, fold-closed the In headset. To change the settings, see "Cover display", p. 99. display", headset. To change the settings, see "Cover is connectedto the device, pressanswer theonthe key the a compatible headset fold. If open when you a callanswer ) may be shown. If you use the music player to listen listen to player music the use you If shown. be may ) dio on and off, change the the change off, on and dio Answer if fold opened if fold Answer to 11 Your Nokia N93 12 Your Nokia N93 Donot forcethe fold to openmore. picture. the in as shown degrees, 160 about opens fold The opened. fully is not fold the if even is activated mode fold-open The menu. the in Scroll menu. the access can you and available, is keypad the up, lights display main the automatically: is activated fold-open mode the fold, the open you When Fold-open mode activated is flashlight The key. flash the hold and Press • activated is flashlight The twice. key flash the press Quickly • is flashlight The once. key flash the press Quickly • side of the device. To operate the flashlight, do the following: Touse the flashflashlight, as a press theflash key the on the fold. open menu, or the calls To make use 3-minute time-out ends. time-out 3-minute and stays on for as long as you hold the key or until the for 3 minutes or until you press the flash key again. seconds. 1.5 for activated display when the fold is closed, the view is mode activated. the When fold is closed and you lift the side the of swing axis mode View landscape selection the and the main display. keys next to and flash key (all located on the side of the device), power key, capturethe key, zoom key, side scroll key, camera mode key, In image mode, numericthe keypad is not active. You can use "Camera",See 23. p. pictures. and take videos record image you can mode, In captured. be to image the see can you camerais activated, and main The is activated. mode image you, the and faces display main the that so down turn the fold sideways, device the hold degrees, 90 When youopen the foldto Image mode To start the camera, fully press the capture key in image mode. the life. battery and reduces power battery on demand the increases background the in running applications Leaving dataunsaved before closing an application. any the The device saves applications. is low, close some may device memory If application. an select and , hold and press open, that are applications between To switch Standby mode functions. of the details further for guide user this in sections relevant the to Refer Use shortcuts to quickly get the most from yourdevice. Shortcuts hands-free Make • Activate photos • your images. View • following: the do to mode view the Use display for optimum secondary camera angle. camera secondary optimum for display a live video during video call.the angle of Adjust the send calls and video slideshows. watch to gallery the from movies and text into a document, press and hold , and select select , and hold and text press into a document, clipboard, while still holding , select select , . to the text text. To copy highlight to or holding still while clipboard, , then same the At . press time, selection, . To end the release hold and press words, and letters select To or while you press To mark multiple items in a list, press and hold and time. same the at press and it, to scroll list, a in item an mark To lists and text Edit 97. "Active p. mode", standby see mode, standby the in available shortcuts other For 67. p. "Services", See oueviecmad,pesadhl . To start a connection to . hold and press commands, voice To use press list, numbers dialed the last To open lines. two the between switches action this lines, phone two have If you To switch between To switch between profile. a and select , press profile, the To change . p. 98. key", See "Media . hold and press applications, multimedia To open hold and press service), (network mailbox voice your call To Normal Services and Silent , press and hold . . hold and press , rs n od . hold , and press Copy . To insert the Paste . 13 Your Nokia N93 14 Your Nokia N93 3 2 1 content Transfer activated. automatically is profile offline the card, SIM a without on is switched device Nokia your When device. other the in card SIM your insert can You model. phone the on depends copied be that can content of type The infrared. or connectivity Bluetooth using device Nokia your to device Nokia compatible a from entries calendar and contacts as such copy content can You message. text special a as provider service the from settings the or you may receive device, in your installed already provider your from service settings have may You information. provider service your based upon configured, automatically settings internet mobile and streaming, GPRS, MMS, has normally device Nokia Your Settings the selected connection type. connection selected the support must devices Both data. transfer the to infrared Select whether you want to use Bluetooth connectivity or select view, information the In select , and Press another device another from content Transfer Tools > Transfer Continue . . from, in the main view, select select view, main the in from, data transferred or copied have you devices the view To main view, select select view, main in the transfer, previous a of information log the view To later. can copying and continue You transferred. cancel timeon the The depends of copying amount data to be inserted). (if card memory and device Nokia your in location the corresponding to device other of the (if inserted) card memory compatible and memory the from copied is Content 5 4 device as a message. To install To install as a device message. models, phone some For 83. p. "Pair devices", paired. See select and device, other the on copy from the other device. other the from copy to you want content the select device, Nokia your From 84. p. connection", See "Infrared devices. two the connect infrared, select you If on the display. instructions the follow and message, the open device, a code(1-16 digits), andselect Enter device. Nokia your on code a enter to asked are You select connectivity, Bluetooth with devices for search device Nokia your have to connectivity, Bluetooth select you If Continue Transfer log . Selectthe other device from the list. Transfer Phones . OK OK Transfer is sent to the other other the to sent is . Enter the same code . The devices are now now are devices . The . on the other other the on Essential indicators Essential Inbox in the messages unread more or one have You (network service). device The is being in aused UMTS network device The is being in aused GSM network. Shown if calls. missed have You Outbox There are messages waiting to be sent in the mailbox. remote the in e-mail new received have You n o h eod . device. to the is connected headset compatible A second the for and is line first the for indicator the service), (network lines phone two have you If number. another to are forwarded device the to calls All service). (network used being is line phone second The active. is alarm clock A locked. is keypad device The are set to alert tone folder in in folder folder. Ringing type Ringing , Off IM alert tone alert IM . Messag. is set to set is . , and , and Silent E-mail alert alert tone E-mail and and Message

other device or the connection has been lost. been has connection the or device other the to connect to trying is device the blinking, is indicator If the is active. connection infrared An A USB connection is active. connectivity. Bluetooth using transmitted being is Data on. is connectivity Bluetooth encryption. have not does that in a network is active connection LAN A wireless encryption. has that in a network is active connection LAN A wireless 103. p. LAN", "Wireless See available. is LAN wireless a and You have set the deviceto scan for wirelessLANs, on hold. is connection data packet UMTS A active. is connection data packet UMTS A available. is connection packet data UMTS A hold. on is connection EDGE packet data GPRS or A is active. connection data packet or EDGE GPRS A is available. connection data or packet EDGE A GPRS active. is call data A A compatible text phone is connected to the device. device. the to is connected loopset compatible A 15 Your Nokia N93 16 Your Nokia N93 To turn off the loudspeaker, select select loudspeaker, the off turn To loudsp. Activate select call, a during loudspeaker the use To a short distance . having withouttoholdear. device your the to The built-in loudspeaker allows you to speak and listen from or to a press sound, listening or are call active an have you when level volume the decrease or To increase control and loudspeaker Volume yourinto device. programmed number official emergency the to . possible be may calls is on, lock keypad the When then , the hold and press closed, fold the with unlock To locked, are keys the . When • open, press fold the with unlock To • then , press lock, To • . press is on, lock keypad the when light display the on turn To keypresses. accidental prevent to lock keypad the Use ciaehandset Activate Keypad lock (keyguard) camera mode key. mode camera be extremely loud. may volume the because is in use, loudspeaker the Warning: is shown on the display. on the shown is Do not hold the device near your ear when . . Options Options > > 5 minutes, select select minutes, 5 To turn off the alarm, select select alarm, the off turn To Set alarm tone. If you select select you If tone. the alarm starts sounding and itself on switches device the off, is switched device the while is reached time alarm the If To change the clock settings, select select settings, clock the change To Clock settings Select to activate the device for calls. Select Select for calls. device the activate to device or device To cancel an alarm, select select alarm, an cancel To when wireless phone use may cause interference or danger. Options Clock type select mode, standby the in shown clock the change To select date, or time the change To To changeTo the alarm tone, select service), select select service), (network to your device information zone time and date, time, the update to network phone the mobile allow To Clock > Yes hna lr satv, isshown. . Whenan alarm isactive, Settings application.setnew alarm, To a select > Clock to make and receive calls. Do not select select not Do calls. receive and make to Analog Network operator time operator Network Snooze Stop . or , the device asks whether you want want you whether asks device the , Digital Clock . Stop > . Options , or , the or stop alarm to for Clock alarm tone Clock Time Clock No or > to switch to the off > Auto-update > Date Remove alarm Remove Options . . Yes . >

. your time zone. matches and is correct time the that Check selected. city the to according changed is device your time in the and currentMy city city,setTo your currentscroll city,selectto a and list. the to cities 15 of maximum add a To add cities to the list, select select list, the to cities add To cities. in different time view the you can view, clock world the connector of your device. your of connector headset to the Pop-Port the to headset a Connect compatible Headset To open the world clock view, open World clock the headset where it can endanger your safety. safety. your endanger can it where headset the to may be hearDo affected. not sounds outside use Warning: . The city is displayed in the clock main view, view, main clock in the displayed is city . The When you use the headset, your ability your ability headset, you use the When TM

Options Clock > n rs . In , and press Add city Add Options . You can You can . > IEEE 802.11b/g standard • features: LAN wireless the following supports device Your life. battery the reduce and power battery on demand the increase features, other using while background the in run to features such allowing or LAN, wireless using Features information. for more authorities your local with LAN. Check wireless of use the on restrictions have France, like places, Some LAN. wireless to the be the location, and device must connected your in available be must LAN wireless a LAN, wireless use To 18. p. "Home network", see network, home a in device your using about information For LAN. wireless have that devices compatible and internet the to device your connect can you LAN, wireless With LAN). (wireless network area local wireless supports device Your tighten them. asand shown, Thread the straps straps cover and lens Wrist Wireless LAN 17 Your Nokia N93 18 Your Nokia N93 applications can use the same wireless LAN connection. LAN wireless same the use can applications several but time, a at device point access LAN wireless one to connected be only can You is active. data packet voice call during a or when LAN use wireless You can 88. p. manager", "Connection see connection, the To end connection. data the end you when ends LAN connection point. The active wireless access internet LAN wireless a using connection data a create you when is established connection LAN A wireless guide. applications Additional the in points’ access LAN ‘Wireless See internet. the to connect to need that for applications point access the Use LAN. wireless (IAP) in a point access internet create an must you LAN, wireless To use connectionsWireless LAN Wired equivalent privacy (WEP) with keys up to 128 bits, • GHz 2.4 of frequency a at Operation • supported by the network. by the supported can be only if are they functions used These methods. protected access Wi-Fi (WPA), and encryption 802.1x the risk of unauthorized access to your data. reduces Using encryption connection. LAN wireless your of the security to increase methods encryption Important: Always enable one of the available of the one enable Always When you activate the Additional applications guide. applications Additional the in wizard’ ‘WLAN see wizard, WLAN about information For connection. LAN wireless a using and establishing when requirements safety applicable any towith comply Remember available). (if in in images print and files media compatible or play view, copy, you can network, the home configured you have After receiver. multimedia wireless a compatible with TV equipped or system a sound or printer, a compatible and system sound a compatible or a TV, PC, compatible a device, Nokia your as such network, the to connect compatible UPnP devices that support wireless LAN and network a home create can you device, point access LAN wireless a With UPnP. with is compatible device Your network Home print", p. 39. "Image and 84 p. network", "Home See TV. compatible a on device Nokia your on stored images view example, Gallery *#62209526# in the standby mode. standby the in *#62209526# enter device, your identifies that address (MAC) Tip! on the other connected compatible devices, for devices, compatible connected other the on To check the unique media access control control access media unique the check To Offline , you can still use wireless LAN LAN wireless use still you can , that texttoread wraps,feeds and blogs. and web pages view only text that form contain in narrow so to Map), page (Mini on a and out in zoom to pages, web you are normal browser, additional view this able With to Press , Press and services. their use to how on instructions you give also will providers Service provider. service your select with fees and pricing, of availability services, the Check (HTML). language markup (XHTML), hypertext or language markup hypertext extensible (WML), language markup wireless the use pages These devices. mobile for Various service providers maintainpages specifically designed the settingsin configure device, Nokia On your devices. the configure then point, access internet home LAN wireless your configure and To sethome up networkingin your wireless LAN, first create net. usingnetwork,devicesconnected startthe you can to completedthe necessaryAfter you have configurations in all device. Nokia your with supplied DVD-ROM the from software Server on the PC, install network, you must the Media the home to share your 86. media files.files", See p. media "View Web browser Web Home net. Internet . To connect a compatible PC to PC to a compatible To connect . > Web . Home See also "Web access point", p. 67. p. point", access "Web also See the of an overview on, is Map Mini the When . page. the on scroll you when shown page is complete press page, the for current off or on Map Mini the To turn 1 card memory the Insert children. small of reach the of out cards memory all Keep corrupted. be may card incompatible the on stored data and the device, as well as card memory the this device. Using an incompatible memory card may damage not fit in thememory card slot and are notcompatible with do MultiMediaCards, Size Reduced as such cards, memory Use only compatible miniSD cards with thisdevice. Other card. memory the to device your from information up back also can You device. your on extra storage space to save the memory You can use a compatible miniSD card as card Memory direction. counterclockwise it upwards in a swing slot, card memory the of door the open To 19 Your Nokia N93 20 Your Nokia N93 4 3 2 1 4 3 2 Eject the memory card memory the Eject displayed, swing open the door of the memory card slot. card memory door of the the open swing displayed, select select on, is switched device If the card. memory the Remove slot. the it from release card to the memory Press When , select and Before you eject the card, press door. the Close locks into place. card the a click when hear You in. the card Push up. is card facing the contact area on the that Ensure slot. the in card memory the Insert device, and data stored on the card may be corrupted. be may the card on data stored and device, operation may damagethe memorycard aswell asthe an of middle the in card the Removing accessed. is being card the when operation an of middle Important: OK Remove memory card and press 'OK' when prompted to confirm the removal. the confirm to prompted when Remove mem. mem. card Remove Do not remove the memory card in the . All applications are closed. are applications All . is memory, select device the to card memory the from information restore To memory card, select a to memory device the from information up back To memory. device the in information up the backing and for space storage card extra as miniSD compatible To format a memory card, select it. use can you before card memory the format must you if out find to retailer your Consult formatting. require and others preformatted supplied are cards memory Some lost. permanently is card the on data all reformatted, is card memory a When card a memory Format , Press and select card . Select to format all new miniSD cards. miniSD all new to format Tip! For optimal performance, use your Nokia device Memory card tool card Memory Yes Options to confirm. Tools Options > > Restore from card from Restore Memory > Backup phone mem. phone Backup Options . You can use use a . You can > Format mem. mem. Format . file name. file which to search, and enter a search text that matches the To move or copy files to a folder, press and at the at the select and file, a mark to and time same available). (if ) press a folder, to copy files or To move ( view card memory the open mgr. folder To find a file, select select a file, find To Options much memory the different data typesconsume, select and how the device in have of data you types what To view View memory consumption , and select press inserted), card (if memory on a or memory device the in and folders files To browse card. memory a on data new save and information space. Memory cards are rewritable, so you can delete old storage extra as card miniSD compatible a use can You memory. device the in saved already is data much how on depends available memory free The to applications, storeand downloaded use data.memory tones, notes, documents, ringing calendar videos, images, Many features of the device, such as contacts, messages, is shown in is shown . The device memory view ( ) opens. Press to to Press opens. ) ( view memory device The . or > Copy to folder to Copy Memory details Memory Free memory File manager Options . . . The of. amount available memory > Find and the memory from from memory the and Options > Tools Move to Move > File File Anyother datathat you no longerneed • "Application also See applications. Downloaded • notes Calendar • •Contact files sound or videos, images, Saved • pages web Saved • memory device the from messages e-mail Retrieved • information • Messages from the the from Messages • application. For example, you can remove the following: Move to folder to Move select and moved, be to files Mark one. have you if card, memory compatible a to data transfer memory, device free To low. is memory card memory or the device the if you notifies device The memory Memory low—free files", p. 40. 40. p. files", in option transfer the using example, You can also transfer media filestoa compatible PC, for To remove data to free memory, use in manager", p. 108. Messag. Tip! transfer data. and device your in memories different the view Use Nokia Phone Browser Browser Phone Nokia Use > Memory card Memory Inbox , Drafts and a folder. and a File mgr. , and Gallery in Nokia in Nokia PC Suite to or the respective Sent . See"Back up folders folders 21 Your Nokia N93 22 Your Nokia N93 is open, select select is open, Your device has context-sensitive help. When an application inbox. Messaging the from message the delete attachment, a message is file .sis the If memory. device the from files installation the to remove file manager use the PC, then compatible a to files up installation back toPC Suite Nokia use memory, sufficient maintain To files. other storing you from prevent and of memory amounts large may use files The memory. device the in remain (.sis) files installation card, memory a compatible to installAfter applications you current view. current Help Options > Help to accesshelp for the Select the desired application to view its help the to help view topics. its application Select desired To open help from the main menu, select select menu, main the from help open To . hold and press background, the in open is that application the and help between switch to instructions, the reading are you When press , press and menu, in the tutorial the To access device. of your features select The tutorialgives you information about someof the you want to view. to want you Tutorial My own > Tutorial and the section section the and Tools > Help . indicator is lit, indicating that video is being recorded. recorded. being is video that indicating lit, is indicator icon The record recording. key to start capture the Press mode. video to select or key, If the cameramode. is in image mode, use the camera mode To activate the main camera, rotate the displaytoimage Record videos & video Images in the saved automatically clips are video and images The different. appear may materials these in resolution image The camera. main the using pixels 2048x1536 of resolution capture image an supports device N93 Nokia The views. landscape and portrait the in video record and images still take to cameras both use can You camera). secondary (the display main the of top the on camera resolution on the side of the (the main camera)device and a lower- Your Nokia N93 has two cameras, a high-resolution camera as an e-mail attachment or by using Bluetooth connectivity. You can send images and video clips in a multimedia message 24. p. settings", "Video See modes). ( extension file .3gp the with format file 3GPP or file format .mp4 in the recorded clips are Video .jpg images. is displayed and a tone sounds. The red recording recording red The sounds. a tone and displayed is Camera Options folder in folder > Switch to video mode Gallery . The cameras produce produce . cameras The , to switch Sharing

2 1 • Status indicators indicators Status • The video viewfinder displays the following: device. the of on the side the zoom),zoom key rotate digital 20x up to To and 3x or optical zoom in (continuous ofout the subject 28. p. modes", 27 and "Shooting lighting",and color p. settings—adjust "Setup See toolbar. the through scroll mode, image in video To make lighting and color adjustments before recording a in The video clip is automatically saved to to saved automatically clip is video The select recording, resume to Pause; select recording, the pause To key. capture the press time, any at recording stop To capture mode. capture current the and mode, light video on, stabilization mute on, audio for (1) Gallery Continue e Gley,p 29. p. "Gallery", . See . Options Exit Images & video Images

23 Camera 24 Camera To send videothe using multimedia, e-mail, Bluetooth • select video, the keep to want not do you If • • The video clip file type (6). type file clip video The • • To immediately play the video clip you just recorded, recorded, just clip you video the play immediately To • toolbar: the from following the select clip, video a record you After • The video quality indicator (5) indicates whether the the whether indicates (5) indicator quality video The indicators ) • card and ( memory ) ( device The memory • you When (3). time recording video available total The • before through scroll can you which (2), toolbar The • onciiy rifae,pes , or select connectivity, or infrared, press select select (high) quality of the video is video the of quality are saved.(4) where videos show the elapsed remaining. and time time shows also indicator length video current the recording, are color tone toolbar is (the displayed not during recording). recording to select the shooting mode, white balance, and file format in a multimedia message. active call. You cannot send video clips saved in the .mp4 This 80. option is not available p. duringconnectivity", an and "Bluetooth 41 p. more information, see "Messaging", , Play Handset (normal) Handset all viewfinder indicators or indicators viewfinder all Tip! display only the video status indicators. status video the only display . Select Options TV (high) , or , or > Sharing Turn icons on , TV (normal) Turn icons off icons Turn . Send to display Delete , Handset . For to . compatible TV or PC and handset), compatible (bestquality for long termand usage playbacka on Options change them again.change To the main settings, select camera, butthe mainsettings remain the same until you settingsreturn tothe default settings after you close the The 27. setup lighting", p. and color settings—adjust (high) Video quality sound. record Audio recording message to a compatiblemessage to a device. duration) so that it can be conveniently sent as a multimedia setup Thereare two kinds of settings for thevideo recorder: settings Video with fileresolution,sizethe video .3gp clipof format). The recorded select MMS, through clip video the send To resolution haswhich VGA and (640x480) the .mp4 file format. view the on a video TV orcompatible PC, select to If you want (MMS)). message using multimedia send to • To record a new video clip, select select clip, video new a record To • Sharing and main settings. To adjust adjust To settings. main and , Handset (normal) > Settings incoming calls. incoming by interrupted not is recording video your Tip! is limited to 300 KB (about 20 seconds in in seconds 20 (about KB 300 to is limited —Setthe quality of the videoclip to Activate the —Select and from the following: the from and , or Off Sharing Offline if you donot wantto Video setup Video TV (normal) profile to ensure ensure profile to (limited video clip size clip video (limited New video New Sharing , see "Setup "Setup , see TV (high) , . TV (high) Handset (QCIF (QCIF Video ,

video clip to a certain album in album a clip to certain video Add to album the video. recording when key, or select select or key, If mode. the camera is in video use mode, the camera mode To activate the main camera, rotate the displaytoimage Take pictures Video stabilization without locking the focus. the locking without picture the take however, can, You again. down halfway it key, and press capture appears. Release the indicator focus the red not locked, Ifwas the focus on the display. appears focus The camera (main only). indicator green locked down To lock the focus on an object, press the capture key halfway mode. image to memory or memory card (ifinserted). use in Memory recording. when zooming optical during Off Select stops. recording the after display the on shown be to clip video recorded of the frame Show captured video a listof available albums. Optical zoom during recording the view clip. video (main camera) or to eliminate mechanical noise causedlens by movement Options —Select whether you want to add the recorded recorded the add to want you whether —Select —Define the default memory store: device Options —Select > —Select whether you want the first first the want you whether —Select Switch to image mode image to Switch > On Play to reduce camera shake shake camera to reduce Gallery —Select Play (secondary camera) to from the toolbar from the . Select On or Yes Off , to switch switch , to to open open to . Select . Select • The image resolution indicator (3) indicates whether the the whether indicates (3) indicator resolution image The • toolbar The (2), • • Status indicators indicators Status • following: the displays viewfinder camera The settings. or color lighting, zoom, the if you change longer may take image captured the Saving 27. p. lighting", and color settings—adjust "Setup See toolbar. the through scroll mode, image in picture To make lightingand color adjustments before taking a is saved. image the before device the move not Do To take a picture, in the main camera, press the capture key. 0.3M Small - 1.3M Print quality is image of the quality capture). image and focus during displayed not is toolbar (the tone color and value, exposure white balance, mode, the shooting to select which you can scroll through before capturing the image mode. capture current the mode, flash and resolution), or on; self-timer on, (1) sequence for (), Off Automatic (640x480 resolution). () On (), Print 2M - Med. - 2M Print

Options (1280x960 resolution), or or resolution), (1280x960 Exit Print 3M - Large (1600x1200 resolution), resolution), (1600x1200 (2048x1536 (2048x1536 MMS MMS 25 Camera 26 Camera • To capture a new image, select select image, new a capture To • • If you do not want to keep the image, select select image, the keep to want not do you If • the toolbar: from following the select picture, the take you After if there mode saving battery the into goes camera The • than is lower picture zoomed a digitally of quality The • still. camera the keep to hands both Use • the following: note a picture, taking When • To print the picture, select select picture, the print To • • To send the video using multimedia, e-mail, Bluetooth Bluetooth e-mail, multimedia, video using send To the • • The device memory ( ) and memory card ( ) ) ( card memory and ) ( memory device The • of number estimated the displays (4) counter image The • itrs rs . press pictures, taking continue To moment. a for keypresses no are that ofpicture. a nonzoomed connectivity, or infrared, press , or select select , or press infrared, or connectivity, indicators (5) show where images are saved. are images where show (5) indicators capture). image and focus during setting and memory in use (the counter is not displayed quality image current the using capture you can images all viewfinder indicators or indicators viewfinder all Tip! display only the camera status indicators. status camera the only display Select Options Print > Turn icons on e Iaepit,p 39. . Seeprint", "Image p. New image New Turn icons off icons Turn . to display Delete Send to . . Print 3M - Large 3M Print image, select the to print If you want consumes. image the memory more the quality, image the better The resolution). to a certain album in the gallery. If you select you select If gallery. in the album certain a to album to Add camera. main the in available only are resolutions These Small select e-mail, through it send to want you If continue taking pictures right away. right pictures taking continue it is or after image taken, captured Show captured image opens. albums available Small Print 2M - Med. Image setup Image camera: image still for the settings of kinds two are There Still image camera settings Options change them again.change To the main settings, select camera, butthe mainsettings remain the same until you settings return to the default settings afteryouclose the The 27. setup p. and lighting", color settings—adjust "Setup Image quality . To send the image through MMS, select (1280x960 resolution), or resolution), (1280x960 > Settings and main settings. To adjust adjust To settings. main and —Select whether you want to save the image image the save to want you whether —Select — Print 3M Large - 3M Print , (1600x1200 resolution), resolution), (1600x1200 Print 2M - Med. - 2M Print and from the following: the from and —Select —Select Yes MMS 0.3M (2048x1536 resolution), resolution), (2048x1536 , or if you want to see the the see to want if you No Print 1.3M- Small if you wantto Image setup Image Print 1.3M - Print 1.3M- (640x480 (640x480 Yes MMS 0.3M MMS , a list of , see , see . . The self-timer is available only in the main camera. main in the only available is self-timer The the picture—self-timer You in memoryenough available), select (if upa sequence six toin to pictures take the camera set To mode Sequence in Take a sequence pictures Extended zoom between digital and extended digital zoom or continuous and smooth be to increments the zoom allow to where the selected image quality is maintained, select select is maintained, quality image selected the where extended digital step point. If you to want limit the zoom to and digital at the pause to increments zoom the allow Memory in use Memory picture. a take Shutter tone cancellation Flicker capture key. capture To return to the sequence mode viewfinder, pressthe self-timer. the with mode sequence the use also can You it. open to press a picture, view To display. the on in a grid shown are they the pictures, take you After key. capture the press pictures, the To take —Select the tone you want to hear when you when hear to you want tone the —Select (main camera only)—Select —Select where to store your images. your store to where —Select is available only in the main camera. main the in only available is —Select 50Hz Options or 60Hz > On (continuous) Sequence mode Sequence On (paused) . Off to to . .

To switch between the flash modes, press the flash flashpress the modes, key. flash the between To switch (), and select select delay, self-timer the set To picture. the in yourself include can you that so capture the delay to self-timer the Use through the toolbar, and select from the following options: accurately or to add effects to your pictures or videos, scroll To enable the camera to reproduce colors and lighting more Setup settings—adjust color and lighting are available: modes flash following The conditions. light low for flash LED an has camera The flash while takingpicture. a the cover not at range. Do or close on people animals flash Keep a safe distance when usingthe flash. Do notthe use camera. main the in only available is flash The Flash You can also use the self-timer in the sequence mode. sequence the in self-timer the use also can You elapses. delay selected when beeps device the and blinks ) the after picture the takes camera The is running. timer the ( indicator self-timer 20 seconds 20 Options Tip! keep your hand steady when taking a picture. a taking when steady hand your keep Off . To activate the self-timer, select select self-timer, the activate To . Select (). > Self timer Options > > Self timer 2 seconds Automatic , > 10 seconds 2 seconds Activate (), . The . The to to , or , or On

27 Camera 28 Camera retained when switching between the two modes. two the between switching when retained and are video image modes, available for and settings are The setup settings applyonly the to main camera. Independent The available settings vary depending on the selected camera. so you see how the change affects the pictures or videos. Thescreen display changes to matchanysettings you make tone Color camera. the value Exposure accurately. more colors reproduce to camera the allows This list. the from balance White environment. of kind certain a to according been adjusted that have settings lighting uses its own environment in which you take pictures.Every shooting mode mode Shooting —Select a color effectfrom the list. —Select the current lighting condition condition lighting current the —Select (images only)—Adjust the exposure time of of time exposure the only)—Adjust (images —Select a —Select proper mode for shooting the shooting mode. shooting mode, select select mode, and color settings. To copy the settings of another shooting lighting different adjust can you mode shooting defined environment, select select environment, a certain for suitable mode shooting own your make To is is mode shooting default the pictures, take you When modes. shooting image or video the from and select toolbar, the through Scroll camera. the main in available only are modes Shooting or environment. style certain to a according set been have mode of mode shooting list. The settings shooting each the from clips video recording or pictures taking for mode shooting a proper Selectcurrent environment. the for settings shootingA mode helpsyou to findthe right colorand lighting Shooting modes Automatic Based on shooting mode . User > Options > Change and the desired desired and the . In the user user In the . only the the only Select Select application, select select application, , and select press LAN, wireless through devices UPnP compatible other with files your or share links, streaming and playlists, clips, sound video To storeclips, and organize your images, Streaming links ooe ie rs . in Videos open in clips sound and music To a open file, press 33. p. "Albums", See albums. to items and add mark, and albums; create also can You 75. p. played in the RealPlayer application. See "RealPlayer", opened and are links streaming .ram files, and clips, Video Home net. inserted) or to device memory, select a file and and file a select memory, device or to inserted) (if card memory compatible a to files move or copy To 30. p. clips", video and Move and copy and Move memory card memory phone mem. Images & video camera modekey, or select & video Images Tip! Gallery Images & video Images Gallery To switch To switch from . . Select , and press to open it. open to press and , . Select , . To open the gallery from the the from the gallery To open . Options Copy to phone mem. Presentations , folder, press the capture key or the or the key capture the press folder, Copy to memory card folder is available. is folder Music playerMusic > Tracks Gallery Go to Gallery Options , to thecamera, in the , . See "View images images "View See . Sound clips RealPlayer > All files All . From . From or Go to Camera or Move to Move Options Camera Move to to Move Camera , or , and , >

, . The options related tooptions related The LAN", p. 17. before the settings for for settings the before and then configure the the configure then and and configure your wireless LAN home internet access point, create first must you LAN, wireless through devices UPnP To share media files saved in in saved files media share To download. can site the which from a bookmark select can Track downl. locations, such as to a compatible PC, select select PC, compatible a to as such locations, to other copied already you that images of size the To reduce indicated are memory device the on stored Files . with . with indicated are (if inserted) card memory the on stored Files To download files into into files To download Free memory and memory Transfer using the browser, select select browser, the using an image to 640x480, select select 640x480, to image an devices, select a file and or locations other to items copied have you after space , or , or e Bc pfls,p 40. p. files", up "Back . See Sound downl. Home net. Home > Home net. Home Gallery Home net. Home Options Shrink Graphic downl. Shrink Gallery . The browser opens, and you you and opens, browser The . in one of the main folders folders main the of one in . To reduce the resolution of of resolution the reduce To . are not available in available are not > application. See "Wireless "Wireless See application. . To increase free memory memory free . To increase havebeen configured. Transfer and and memory Transfer with other compatible other compatible with , Video downl. Video Options Gallery > > ,

29 Gallery 30 Gallery Open inserted). (if card memory compatible a on or memory device in the it save must you player, media the in or gallery the clip in video or image received a view to able be To infrared. by using or connectivity, Bluetooth through attachment, e-mail an as message, to you in be sent clips multimedia also a can are stored in in stored are camera the with recorded clips video and taken Pictures View images and video clips video and View images select select To add an or a image video an in theclip to gallery, album 32. p. images", "Edit See 30. p. image editor opens.or "Edita video See editor clips", select a photo, clip or a video edit To down. or up scroll groups, in files browse To right. or left scroll one, by one files the browse To displayed. files are in a loop, and ordered files by date. The is of number clips in the gallery and and gallery the clips in clip or several a video select clips, video custom To create 33. p. Options select printing, for inserted) (if card memory your on them store to or printer, compatible a on images your print To 30. p. clips", Images & video & Images Options > Print Images & video & Images > e Iaepit,p 39. p. print", "Image See . Albums in in Options Gallery > Add to album Add in in . The images and video and . clip The images Gallery > Edit Options . See "Edit video video "Edit See . . Images and video . See "Albums", "Albums", . See > Edit . An . An want to create a muvee, and select select and muvee, a create to want you which with clips and video the images Select clips. use also can You clips. the video between or the video of and end beginning the effects. Transitions are visual effects that youadd can in and video trim clips, add images, clips, transitions, sound and and combine video clips, custom To create 29. p. "Gallery", select and clip, video a to scroll To edit video clips in video clips edit To clips video Edit Create muvee Options select an image, zoom to opened, is image the When . viewTo the image,scroll to an image,press and information. more for , selectand press service), (network service uploading file media provider's service your to message multimedia a send To and and To theuse picture as select image, a background the picture permanently. stored not is ratio zooming The display. the of top the at To delete an image or video clip, press . . To delete an image or video clip, press Options > Upload Zoom in Zoom > . See "Movie director", p. 78. director", p. "Movie See . Assign (if available). Contact your service provider provider service your Contact available). (if Movie director Movie or or Gallery > Zoom out Zoom Set as wallpaper and and video create custom clips, Options to create custom video video custom create to . The zooming ratio is ratio zooming The . Options > Edit . > . See . See Edit > video clips, and select select and clips, video or more one and select mark video clips, custom To create and transitions Edit sound,video, image, text, down. or up scroll timelines, the between switch To timeline. transitionsadded tovideoa clip are shown onthe video clip and text, images, The timeline. clip sound and timeline clip video timelines: two see can you editor video the In transition oftransition the video is active. first the when transition start select You can video clips. start of a video, atthe end of a video, and transitions between Edit transition clip. the duplicate or remove or length, its adjust clip, sound the move or Cut Edit soundclip screen; and set a background or a color effect to the image. remove, or duplicatean image; define how long it stays on the Edit image how long it stays on the screen; add and effects to the text. duplicate text; change the color and style of the text; define Edit text mute or unmute sound,move, remove, or duplicate the clip. clip video Edit options: following the from select video, the To modify (shown only if you added text)—Move, remove, or or remove, added iftext)—Move, you only (shown (shown only if you added an image)—Move, an image)—Move, added you if only (shown —There are types—There of are three transitions: the at (shown only if you have added a sound clip)— a sound added have you if only (shown —Cut, add color effect, use slow motion, motion, slow use effect, add color —Cut, Options > Edit > Edit . Via e-mail message size that you can send. can you that size message multimedia maximum of the details for provider service To the video, send select Default sc. shot name shot sc. Default To save your video, select select video, your To save In In memory. device the is default the define view, press , and select select and , press view, select select To atake of snapshot a video clip, in the cut video view, message. multimedia a in it sending for size proper ato movie the cut or movie, the send or save Movie clip sound Insert Settings —Select —Preview the movie in the full screen or as a thumbnail, Options enhancement. reader card memory compatible a using compatible PC or by connectivity, Bluetooth using You can also transfer 82. your videos to a p. data", Bluetooth wireless technology. See "Send clip using the send you provider, can service maximum multimedia message size allowed by your Tip! Memory in use Memory . , , you can also define define , you can also If you want to If you want to a videosend clip is that over the Via Bluetooth Via Video clip > Take snapshot , Resolution , Send Image Options , select , or Take snapshot Via infrared > . In the thumbnail preview preview thumbnail the In . , Default video name video Default Text Via multimedia Via Options > , and Movie , Sound clip Memory in use Memory in . > . Contact your > Settings Save , , or . To . To New . The , . 31 Gallery 32 Gallery To crop an image, select text, clip art,or a frame to the picture. add effects, and resolution; and contrast, color, brightness, Select saved in saved already images or them, taking after pictures the edit To Edit images Edit Shortcuts in the image editor: in the image Shortcuts . press redness, the To resize display. on the A loop appears . scroll To reduce key. the eye, use of the the size fit the loop to eye, and press To reduce redness of the eyes in an image, select select image, an in eyes the of redness reduce To . the use picture, the within area the . press cropped, move be To to area the select To key. scroll area, press selected the freeze To key. scroll the use area, highlighted resize the be To to cropped. area the left of corner upper the select ratio, aspect predefined a selected you If image. the cropped represents a rectangle that areas form To adjust the first selected area, select select area, selected first the To adjust in the lower right corner. Againcropped. select be the area to selecttoselect crop, and the area in the upper left corner of the image. the Move scroll key to aspect ratio from the list. If you select Apply effect crop the image size manually, select Apply effect Gallery > Red eye reduction , select , select to cropand to rotate the image; adjust Options Options > Set > . Move the cross onto the Apply effect Edit Manual Manual . Another cross appears . Back or a predefined , a cross appears . The selected selected . The > Options Crop . To . To > Select Select show Slide slide show, select select show, slide (next). the starting before show, of the slide the tempo To adjust or (previous) press the images, browse To End Continue Pause clip video Play following: the from Select file. selected the from slide show starts The mode. clips in full screen the video To add sound to the slide show, select select show, slide the to sound add To slides between Delay show Music omv nazoe mg,pes , o . or , . , press aimage, To on zoomed move or • press or out, in zoom To • counterclockwise, or clockwise image an rotate To • return To . press screen, full the in image an view To • press press again. . or to thenormal view, press —to close the slide show —to open the RealPlayer application, and play a selected a selected play and application, the RealPlayer open —to > —to pause the slide show slide the pause —to —Select —Select Options Settings —to resume the slide show, if paused if show, slide the resume —to On > and and the following: from Slide show or or Options Off . . > > Slide show Start to view images and and images view to Options > Settings > Slide > viewed on theTV, the is it while view thumbnail the in image an open you When what is on the displayed of screen device. your in folder than the other For applications TV. all of a compatible input video the to cable connectivity Video Nokia compatible a TV. Connect of a compatible screen the on device in stored your and images videos can watch You TV out mode press show, slide the during volume the increase or decrease To or . Track When you open a highlighted video clip, clip, video a highlighted open you When plays. music selected the while screen full in TV the orare marked displayed in and images on an album videos items All show. slide a as images and videos view can You in full screen. TV on the is displayed image opened the zoomed, is not image When system and TV aspect ratio. See "TV configuration", p. 108. ratio. "TV See configuration", and TV aspect system TV applicable the for configured be must settings out TV normally. microphone the device use can You device. the to connected Cable is Video-Out tone, and key tone,is routed to the TV when the Nokia ringing clip sound, video stereo the including audio, All screen. See "RealPlayer", p. 75. the TV and display the device on clip video the playing —Select a music file from the list. the from file music a —Select Gallery and RealPlayer Zoom in Zoom option is not available. available. not is option , the TV screen displays displays screen TV the , Images & video & Images RealPlayer starts

depend on the service provider. the service on depend available products The pads. mouse or as mugs such image, selected the with products different order and online, With the online Print video the in list, albums the To view clips. video and your images manage conveniently you can With albums Albums the select files, .svg view To resolutions. and sizes screen different with viewed or printed when appearance their maintain images These maps. and cartoons as such files, graphics) vector (scalable .svg view can you presentations, With Presentations scroll to a picture or video clip, and select select and clip, video or a picture to scroll gallery, the in an album to clip or a video To add a picture To remove a file from an album, press . The file is not not is file The . the from deleted press album, an from file a remove To . which you want to add the picture or video clip, and press album Add to select select ozo n rs .T omot rs . press out, To zoom . press screen, normal and screen full between To switch press in, To zoom folder, select select folder, Options Print online Print Presentations . A list of albums opens. Select the album to > Images & video & Images Play Options . application you can print images images print you can application folder, scroll to an image, and scroll to an folder, image, > Albums folder folder in Options > View albums View Gallery > Images & Albums . . * > . 33 Gallery 34 Gallery You can only print images that are in jpeg are format. that in jpeg only print images You can 4 3 2 1 support that providers service printing obtained from be can files The installed. file configuration service printing one least at have and provider service printing online an with service use order In to you selected in selected you the images displays and opens, view preview images the server, provider service the to are connected you When order. the of status and sum, total provider, service the of Order now Order the images. view to down or up Scroll Preview Select Log file installed. one configuration least prints Order If you remove the last service provider from the list, the Remove Open Select list. the provider from a service Select select and , Press an image or images, and and images, or image an —to view the details of the previous orders: the name Print online Print —to start the connection to the service provider Options Options —to view the image before ordering a print. print. a ordering before image the view —to —to remove the service provider from the list. list. the from provider service the remove —to —to submit your order your submit —to Print online Print option is not available until you have at at have you until available is not option and from the following: the and from following: the and from Gallery . Gallery . Options , you must subscribe to the > Images & video > Print > Order prints . Select . Online sharing With the types may vary depending on the service provider. service the on depending vary may types content supported The the albums. of content the view and later, continue and as drafts posts unfinished save online sharingservices on the web. can You upload content, other or in weblogs, albums, online in and videos images is displayed. When the order is sent, is sent, the order When Log Remove image image Add contacts. from information You order can copy the information. customer info customer Change of the images in the order. other details image the change and view to right or left Scroll varyand products on the depending service provider. of what type you towant order. The available options and product which select can you view, order product the In image. selected the for copies of number and order product Change —to view the details of the previous orders. the previous of the details view —to according to your country or sales area. sales or country your to according vary may service of this availability The Note: Online sharing —to add more images to the order the to images add more —to —to remove images from the order from images remove —to application, you can share your your share can you application, —to adjust the product details details product the adjust —to —to change the customer and and customer the change —to Order sent successfully sent Order

service providers, see see providers, service compatible on information more For service. the to subscribing on details for provider service your Contact provider. service the of page web the on service the to subscribe usually You can provider. service sharing image online an To use Get started copied, modified, transferred or forwarded. tones), ringing and other from (including content being music images, some may prevent protections Copyright Press , Press and Upload files select created a new account offline, or modified an account or account an or modified offline, account a new created theicon text with Options password.can ac and You name sharing the in time first the for service the open you When a service, select select service, a The camera. main the you want to upload, and You can access the e Oln hrn etns,p 36. p. settings", sharing "Online See Select service Select Online sharing application, you are prompted to provide the user the provide user to are application, prompted you > Settings Options Create new view opens. To create a new account to account new a To create opens. view in the in the Online sharing Online , you mustsubscribe to the service with Gallery www.nokiausa.com/support > Options Add new account new Add Online sharing > in the services list. If you have have you If list. services in the cess cess later the settings through Images & video Images > application also from from also application Send > application. application. Web upload or the service , the files files the , . Online . draft and sent entries in your device, in the your device, in draft and sent entries viewTo uploadedimagesand videos in theonline service, or service Open online folder, select select folder, as a draft, select select a draft, as To cancel the web upload process, and save the created post reorganize them, add text to them, or add new files. areshown the in edit state. You can openand view thefiles, youWhen select the service,the selected images and videos services Retrieve select device, your in list services the update to service settings through a web browser on a compatible PC, already started,select • following: the from select service, a open you After list. the from service select device, your through a web browser, and wish to update the services list in settings service or account an or modified offline, account offline. and be created a you have modified If created new select select web, the to files the upload and service the to connect To service provider. service the on depending vary may view The browser. web service view and the uploadeddraft and albums in the Open in Web browser Options Options > Back Upload . To select a service, press the scroll key. scroll the press service, a select To . Options > > Cancel Save as draft Save Open service rpes . , or press —toconnect to the selected > > Retrieve services Retrieve Save as Save as draft . If the uploading has has uploading the If . . Accounts can also also can Accounts . Images & video & Images . Options . Select a >

35 Gallery 36 Gallery service provider. service the on depending vary may options available The existing accounts. To create a new account, select select account, new a To create accounts. existing device, including the sent items for the service. for the items sent the including device, you from deleted also are account the to related services in account an delete you If provider. account, you must create a new account for the new service existing an for provider service the change You cannot use. Service provider Account name In My accounts the edit To Online sharing settings • • • application, select select application, account and and account Add new account My accounts New post New device your Sent them to the web Drafts —to view the 20 latest entries created through through created entries latest 20 the view —to —to view and edit the draft entries, and upload upload and draft entries, the and edit view —to Online sharing Online Options —to createnew a entry —to enter a name for the account the for name a enter —to , you can create new accounts or edit edit or accounts new create can you , —to select the service provider you want to want you provider service the select —to . To edit an existing account, select an an select account, existing an edit To . Options > Edit settings, in the the in settings, > . Select from the following: the from Select . Settings My accounts . Online sharing Online Options , the , the >

User name are uploaded to the service the to uploaded are size image Upload service online the to registered you when account your for created you password connect to the online service, select the access point you want. you point access the select service, online the to connect point access Default providers. service predefined of settings the change cannot You lost. is My accounts the all provider, service the change you If provider. service a of details view or provider, service add a new settings, Service providers Advanced newto a entry text edit you add or or when entries, draft and sent in text size text Display not affect the upload image size. does setting This device. your display of the on shown is Display image size Application settings and and information for the previous service provider provider service previous the for information Password —to select the font size used to display display to used size font the select —to —to view or edit service provider provider service edit or view —to —to select the size in which the images images the which in size the —to select —to select the size in which the image image the in which size the select —to —to change the access point used to used point access the change —to —toenter the username and you can play music files and create and listen to playlists. to listen and create and files music play can you Options your music library. Select Select library. music your you add After in the device, update or music remove files library. music a create to files music for memory device the searches player the time, first the for player music the open you When Add music , Press and select Media applications may be extremely loud. extremely be may when the loudspeaker is in use, because the volume ear your near device the hold not Do hearing. your damage may volume to high exposure Continuous Warning: Nokia Music Manager available in Nokia PC Suite. PC Nokia available in Manager Music Nokia with (if card inserted) memory to a compatible Tip! > Music player Music Update Music library Music Update You can transfer music files from your device device your from files music transfer can You Listen to music at a moderate level. level. moderate a at music to Listen Music player Options . . With the musicplayer, > Music library Music > rpals sdslyd ove h ui irr,slc or select library, music the view To displayed. is playlist or When you open the music player, the previously played track Play music Options . select playback, music tone of the To modify or press volume, the To adjust playlist. saved a select Options or 'NowOpen playing' To view the currently . played song list, selectTo start the playing or next previous or song, press rewind, or forward fast To . and hold press press a song, To stop . or press between play and pause, to a song is playing, change When or . select view, the in songs the playing start Options select mode, play normal and play random between To select select select at the end of the orplaylist its restarts from beginning, Options Options > > > Add to track list track to Add Equalizer Random play > Music library > Loop . To save. the To song list asplaylist, a select . . . To select whether playing stops stops playing whether select . To and the desired song list. To list. song desired the and , and create a new playlist, playlist, aor , new and create Options Options > Play . > 37 Media applications 38 Media applications selection in your device, select select device, your in selection song the updated have you after library the refresh To 80. p. connectivity", connectivity. For details,"Bluetooth see or Bluetooth cable USB a compatible using devices compatible other PC or compatible a from transfer music can You Transfer music select library, music the view To Music library Options select music, downloading for bookmarks web your To open ui library Music in the background, select select background, in the To to return mode and leave theplaying standby the music All tracks Artists To view playlists, select select playlists, view To one. existing an to add or playlist new a create can You and items the select playlist, a to composers or artists, genres, albums, add songs, To available. if files, song of the tags or M4A ID3 the from is collected information composer select select Options songs, select to add more yourself, created you have To delete a playlist, press . Deleting a playlist only deletes deletes only a playlist . Deleting files. music the not playlist, the press a playlist, delete To Options , Genres > > lists all music. To view sorted songs, select Track downloads Add tracks Add . > , or New track list track New Composers . Track lists Track Options . Options . album, The artist, genre, and Options . When viewing a playlist playlist a viewing When . Options . To create a new playlist, . To create a playlist, new > Play in background in Play > > Add to track list track to Add > Update Update Music library Music Albums . . . , To change the default USB connection mode, press , , selectand press mode, To change USB connection the default • To use Nokia Music Manager in Nokia in Nokia Manager connect PC Suite, Music use To Nokia • Player, Media Windows with music synchronize To • drive hard external PC as an a on device your view To • music: transfer to methods different three use can You Transfer music from PC • Nokia PC Suite 6.7 or later or 6.7 PC Suite Nokia • A compatible version of Windows Media Player • later) (or system operating XP Windows Microsoft • transfer: music for required is software PC following The connection mode. connection the compatible USB cable, and select select and cable, USB compatible the cardneeds tobe inserted in the device. player select and cable, USB compatible the connect in device. the to be inserted needs card memory storage Mass select cable, USB the using are you If connectivity. or Bluetooth cable USB a compatible with connection the make files, data any transfer can you where Nokia N93 section of the Nokia website. Nokia of the section N93 Nokia the from compatibility Player Media Windows about application. information detailed more get can You as the connection mode. A compatible memory memory A compatible mode. connection the as Connect. as the connection mode. A compatible compatible A mode. connection as the > Data cbl. Data > Data cable mode cable Data PC Suite Media as the the as . 2 1 selections: manual transfer To Player. Media namethat isused as the nameof your device in Windows a enter must you device your connect you time first The and playlists that you towant copy, move, or remove. the songs you can select synchronization, manual With device. your in memory free enough not is there if synchronization manual selects Player Media Windows PC, a with compatible your device connecting After synchronization Manual and helps. guides Player Media Windows corresponding the see information, more For application. Player Media the Windows of versions different between vary may synchronization music of the functionality The Music transferwith Windows Player Media guide. user PC Suite Nokia the see Manager, Music Nokia with music transferring about information For files. music for transferring optimized been have PC Suite Nokia Media in Player Manager and Nokia Windows Music Both select an item in the list, and click click and list, the in item an select albums, or songs remove To synchronization. Dragthesongs oralbums to thelist pane for is one than device more connected. if pane, navigation in the device your Player, select Media Windows with connected is device your After Remove from list from Remove . Windows Media Player Player Media playlists. Windows the with synchronized not are device your on playlists The information. more for help Player Media card of device. the compatible memory Windows See your the and memory device the in fit can than files more contain may library PC Your synchronization. for selected is If no playlists have been selected, the whole PC music library Media Player. in Windows selected is automaticallybased updated you have on playlists device your in library music the device, your connect you and or a compatible memory card (if available). (if card memory compatible a or cable,data LAN wirelessBluetooth (ifconnectivity, available), Use print Image Player,click the arrowunder Media Windows in option transfer file default the change To Automatic synchronization 3 If the automatically click click the device. Click device. the on memory free enough there is that and synchronize to want you files the contains pane list the that Check Image print Image Set up Sync. Sync thisdevice automatically check box. check to print your images using a compatible compatible a using images your print to Clear or select the the or select Clear Start Sync. Start Sync to start the synchronization. , select your device, and check box is selected is selected box check Sync this device 39 Media applications 40 Media applications an image in the gallery. the in image an printing you start when only opens view preview The print Print preview When you use Printer selection with compatible a printer to To print viewer. or image editor, image camera, gallery, the in option print the and print to want with To images print format. jpeg in saved automatically are camera the with taken pictures The are format. in jpeg that only print images You can the data cable before you select the print option. print the select you before cable the data To change the default printer, select select printer, default the change To is displayed. devices printing available of list a available, not is printer default the If displayed. is automatically print with compatible a printer connected If you have Select a printer. The printer is as set the default printer. image. the select you after displayed is printers available settings using a Nokia connectivity cable CA-53, the printer printer the CA-53, cable connectivity Nokia a using > Default printer Default Image print Image Image print Image . for the first time, a list of of list a time, first the for , select the image you image ,the select Image print Image Options > Print , connect Image Image select To change theTo change Transfer and memory to which you want to transfer the media files. Select Select files. media the transfer to want you which to Your device starts devicea search. Select a device and a folder 17. p. LAN", "Wireless igepg,pes o to display the additional pages. or through the availablesingle page, press layouts for or the selected printer. If the images do not fit on a To change the layout, press The selected images are displayed using predefined layouts. compatible PC through the wireless LAN, select select LAN, wireless the PC through compatible To transfer and back up files media your todevice from a Back up files setTo a default printer, select selected. you device printing the of capabilities vary, depending on availablethe options The Print settings To select the paper size, select size, select paper the select To previous view. previous from thelist, and Options Storage device > Settings OK . Select . Select > Automatic transfer Automatic . Cancel or Paper size Paper Options Storage folder to return to the the to return to > , the size of paperthe of , size Default printer Default . See Options settings, settings, OK > . . Messag. device. receiving the on depending vary may message of a appearance The messages. multimedia display and receive can features compatible have that devices Only select and , Press To create a new message, select select message, new a create To commands. service send and messages, broadcast cell messages, service web receive infrared, or connectivity Bluetooth data using and messages receive also can You data. containing messages text special and messages, e-mail messages, multimedia send, receive, view, edit, andorganize text messages, My folders My are stored inthe messages E-mailhere. stored are messages, broadcast Inbox services, contact your service provider. service your contact services, messaging about details more For destination. intended the at is received message the whether indicate not may device Your device. your into programmed number center message the to sent was Note: contains the following folders: the following contains Messaging —Received messages, except e-mail and cell and e-mail except messages, —Received Your device may indicate that your message message your that indicate may device Your —Organize your messages into folders. Messag. Mailbox . In . New message New Messag. , you can create, create, you can , . messages you have sent (network service). service). (network sent have you messages a delivery report of the text messagesand multimedia Reports here. stored Outbox 53. p. settings", "Other see saved, be to messages of infrared,or are stored here.Tochange the number connectivity Bluetooth using sent messages excluding Sent here. stored Drafts 50. p. "E-mail", See offline. messages e-mail retrieved previously your view or messages e-mail new your retrieve Mailbox remote mailbox. your to connect you time next the sent be to messages e-mail also schedule You can coverage. network outside is device your when example, Example: folder. templates the in texts use often, Tip! —The last 20 messages that have been sent, sent, been have that messages 20 last —The To avoid rewriting messages that you send send you that messages avoid rewriting To —Draft messages that have not been sent are are sent been not have that messages —Draft —Messages waiting to be sent are temporarily are be sent to waiting —Messages —You can request the network to send you —Connect to your remote mailbox to to mailbox remote your to —Connect Messages are placed in the outbox, for for the outbox, in placed are Messages 41 Messaging 42 Messaging command In the main view of view main In the provider. service your contact numbers, topic relevant and topics available For provider. service your from conditions messages as on various ortopics, such weather traffic Cell broadcast broadcast reception. broadcast cell prevent may connection data packet A networks. UMTS in received be cannot messages broadcast Cell follow-up. for ) ( flagged topic, it and name, a has been whether number, topic broadcast 123 ABC text Write select provider, service your to services, for such network as activation commands), commands To enter as requests (alsoand send known USSD service possible. be not may address e-mail an to sent has been that message a multimedia of report a delivery Receiving indicates the number mode. number the indicates , abc osic ewe h odr,pes o . or press folders, the between switch to Tip! , and in the main viewof . In the main view, you can see the status of of a status the can you see view, main . In the When you have openedof anythe default folders, Abc (network service) allows you to receive receive to you allows service) (network indicate the selected character mode. mode. character selected the indicate Messaging Messag. , select Options Options . > > Cell Cell Service • To insert a space, press . To move the cursor to the the to cursor the move To . press space, a insert To • the as key same the on is located letter next the If the until • repeatedly ) — ( key number a Press • input. text traditional 1 isdisplayed when you write textusing predictive textinput. can add new words. you which to dictionary a built-in on is based input text Predictive keypress. single a with letter any enter can You input text Predictive Traditional text input next line, press three times. three press line, next letter. enter period), the and time-out the end to appears (or the press cursor wait until present one, available for a number key than are printed on the key. characters more are There appears. character desired for all editors in the device. the in editors all for and select , on text Predictive press input, text To activate predictive is displayed when you are writing text using using text writing you are when is displayed . This activates predictive textinput 3 2 4 one, or press , and select select and , or press one, the matchingwords the view dictionary to repeatedly has foundone by press correct, is not word If the to add a space. to it, confirm or press press correctly, word the writing finish you When keypress. each after changes suggestion word The a. for and N, for press selected, is dictionary English the when "Nokia" write to example, For letter. one for . once only key each Press — keys the press word, desired the write To If the If the Start writing the next word. next the writing Start word. added oldest the replaces word new a full, is dictionary the When select dictionary, the to a word To add dictionary. the in not and select select and for o, for k, for i, i, for k, for o, for ? Spell character is shown after the word, the word is OK , enter the word using traditional text input, input, text traditional using word the , enter . The word is added to the dictionary. the dictionary. to added is word The . Predictive text Predictive > Matches . ooe ito pca hrces rs n od . hold and press characters, special of list a To open . . press marks, punctuation common the most To use . To delete onethan more hold and press character, To adelete character, press . To switch between the different character modes, press . hold and press mode, and number letter the between To switch key. number desired hold the press and mode, letter in the a number To insert Tips on text input , press device, in the editors for all off input text predictive turn To and Turnpredictive text input off select add a space. to To word. compound of the part last the Write . press word, the compound complete press it, confirm to word; compound a of half first the Write Write compound words press press twice. Tip! time, press when you select each character. each select you when press time, Tip! To turn predictive text input on or off, quickly off, quickly or on input text predictive To turn To insert several special charactersat the same Predictive text Predictive > Off . 43 Messaging 44 Messaging 1 MMS. by be sent can it so that smaller it make may device the limit, this exceeds picture inserted the If messages. of MMS size the limit may network wireless The 50. p. "E-mail", and 45 settings", p. e-mail and MMS "Receive See place. in settings connection correct the have must you e-mail, an write or message multimedia a create can you Before on the receiving device. depending vary, may message multimedia a of appearance The Write and send messages send and Write with the mailbox guide, select select guide, mailbox the with prompted to do so. To start creating the e-mail settings If you have notset up your e-mail account,you are E-mail (MMS) message message Multimedia Text msg. Select Select New message New —to send e-mail an send —to —to send a text message text a send —to and one of the following: the of one and —to send a multimedia a—to multimedia send Start . 2 3 4 5 6 ( address. To add a semicolon e-mail or number phone enter the recipient’s or contacts, from groups or recipients select to In the the In In the the In clipboard. the from address or number the You . paste and copy also can press recipients, select the fields are visible, that change To e-mail. or message multimedia of a subject the object template, select select template, a To insert message. the write field, message In the Options select message, a multimedia to object media a To add multimedia message, select afor or video sound or record picture new a To take 24. saved, p. "Videosee settings", are videos recorded which in format the To change clip clip select select ; ) that separates the the separates ) that , or , or . When sound is added, is shown. is added, is sound When . Options Subject Slide To > Video clip > fed rs press field, Template Insert object Insert . field, enter > Address fields Options . To insert a new slide to the message, message, to the slide new a insert . To . > > Image Insert new Insert Insert . , or Sound clip Insert > Image , or , Sound Video 8 7 E-mail messages are automaticallyplaced in in a single be sent message. can that characters of number the limiting space, more up take options, language some from characters and marks, other or provider may charge accordingly. Characters that use accents service Your messages. or more of two series a as sent are messages Longer single message. for a limit character the of the device sending beyond messages Your supports text the is in e-mail left the does not succeed, If sending sending. tahet r niae y . by indicated are attachments Options looks like, select message multimedia the To see what Insert To send the message, select the message, To send To add anattachment to an e-mail, select Outbox Guided option is shown only if and select select and message, a multimedia to create Start message. multimedia a in it send and presentation a to text Tip! > Send select and application, appropriate the open Tip! with the Image > You can combine images, video, sound, and and sound, video, images, combine can You Preview or To send other file types as attachments, attachments, as types file other send To > Free , Options Via e-mail Sound clip Failed e Mliei esgs,p 50. . Seemessages", p. "Multimedia . > status. MMS creation mode creation MMS Create presentation Options , if available. if , , Video clip Video > Send , or Outbox Note o rs . press or Options is set to to is set . E-mail . E-mail . The . The before before > 2 1 Enter settings the MMS manually provider. service by your given instructions the Follow provider. service your contact services, data to subscription and of availability For 46. p. settings", "Data and See provider. service your from message a in settings the receive may You Receive MMS and e-mail settings • Define your e-mail settings correctly. If you select If you select correctly. settings your e-mail Define • 100. an IAP correctly. See Configure "Connection", p. • following: do the must you e-mail, forward and to, reply retrieve, receive, send, can you Before Press , and select select , and Press 100. p. "Connection", See point. access messaging Access points rs , and select Press Multim. msg. Multim. service provider (ISP).service internet and mailbox remote by your given instructions the Follow account. e-mail separate a have must You select guide, mailbox the with settings e-mail the creating start To do so. to prompted are you account, e-mail your Mailbox 50. p. messages", "Multimedia See also connection. created as the preferred you point in the in the Start , and define the settings for a multimedia multimedia a for settings the define and , > Messag. Access point in use in point Access e lo"-al,p 50. . See also "E-mail", p. Messaging Tools main view and have not set up set up not have and view main > Settings > Options and the access access the and > Connection > Settings > > 45 Messaging 46 Messaging Multimedia messages and a message, receive you When through received data connectivity. Bluetooth and infrared, through In the To reply to a received message, select select message, received a to reply To Photosmart 8150), select select 8150), Photosmart or HP Printer Mobile 450 Deskjet HP as (such connectivity Bluetooth with printer equipped (BPP) profile basic print compatible a on message multimedia a or text a print To select select data connection to retrieve the message to yourdevice, waitingin the multimedia messagecenter. To startpacketa is message multimedia a that notification a receive may You Show select message, the open To mode. standby in the shown an unread multimedia message, data received received data message, multimedia unread an . To open a message in Inbox Options software or otherwise be harmful to your device or PC. malicious contain may objects message Multimedia Important: Inbox—receive messages Inbox—receive folder, indicates an unread text message, message, text unread an indicates folder, > Retrieve Exercise caution when opening messages. messages. opening when Exercise caution Options . Inbox > rs . press , Print Options 1 new message . > Reply are . Options select department in a configuration message. To save the settings, management information company or provider service your Configuration message ): ( data contain that messages of kinds many receive can device Your settings and Data Ringing tone saved. not are card business the to attached Business card Business If the message includes a multimedia presentation, is is indicator. the select presentation, the To play displayed. presentation, multimedia a includes message the If select message, multimedia seeTo the media objects thathave beenincluded inthe video, the or sound the To play included. is video if the indicator. select if sound is included, is shown or an see may you ), a and message. image ( message multimedia a open you When select identification, own provider’s service of the instead mode Operat. logo Save to Calendar Calen. entry Options Options > Save business card —To save the ringing tone, select select tone, the ringing save —To —To save the invitation, the select —To save invitation, —To have the logo shown in the standby standby in the shown logo the have —To —To save the information to information the save —To > > Save all Save . . —You may receivesettings from . Options . Certificates or sound files files or sound . Certificates > Objects Contacts Options Options . , select , select > > Save . You can have up to six mailboxes. mailbox replaces replaces mailbox to the you give name the mailbox, new a create you When 50. p. also See "E-mail", the e-mail settings with the mailbox guide, select select guide, mailbox the with settings e-mail the creating start To do so. to are prompted you account, connect to the mailbox ( mailbox the to connect to you want if asks device the mailbox, the you open When Open the mailbox select you If For availability and subscription, contact yourservice provider. example, (for notifications are ) link. or a message text a contain may and headlines) news ( messages service Web messages Web service select web, in listed Web message may list more detailed information. detailed more list may extended notification An mailbox. remote in your you have notif. E-mail to save the data, select bookmarks, and settings point access both contains message Mailbox Mailbox —The note tells you how many new e-mails e-mails new many how tells you note —The —To save the bookmark to the bookmarks bookmarks the to bookmark the save —To Mailbox Options and have not set up your e-mail e-mail up not set your and have Options Connect to mailbox? in the in the > Add tobookmarks > Messaging Save all . main view. ). . If the Start . 1 not connected to the remote mailbox. remote the to connected not No select offline, messages e-mail retrieved previously view To 100. p. also "Connection", See data connection. a using online, you are continuously connected to a remote mailbox If you are offline, select select offline, are you If messages Retrieve e-mail connection to the remotemailbox. 2 headings or messages, select select or messages, headings e-mail new retrieve and mailbox your to To connect . When you view e-mail messages offline, your device is your device offline, messages e-mail you view . When mailbox, select select mailbox, When you have anopen connection to a remote e-mail messages offline. messages e-mail Disconnect continue viewing them online, or select or select online, them viewing continue can you messages, e-mail the retrieve you After To stop retrieving messages, select select messages, retrieving stop To All have been marked Selected New following: the of —to retrieve all messages from the mailbox the from messages all retrieve —to otherwise be harmful to your be to harmful or your PC. device otherwise E-mail messages may contain malicious software or Important: —to retrieve all new e-mail messages e-mail all new retrieve —to —to retrieve only the e-mail messages that that messages e-mail only the retrieve —to to close the connection and view the the view and connection the close to Exercise caution wh Options Options > Yes Retrieve e-mail . When you view messages > Connect en opening messages. Cancel Options to start a . and one and > 47 Messaging 48 Messaging attachment indicator , and select , and attachment indicator Toview e-mail attachments, open a message thathas the 3 retrieved to the device; select select device; to the retrieved been not it has indicator, dimmed a has attachment If the 8150), select select 8150), Printer as (such 450 or Mobile HP Photosmart HP Deskjet profile connectivity Bluetooth with (BPP) equipped printer print basic compatible a on message e-mail an print To 71. p. entries", calendar "Create 71, and requests", p. "Meeting See mailbox. the in requests meeting receive also can You the mailbox. the from message this to retrieve if you want asked are you e-mail . If the offline, are you and retrieved been not has message press message, an To e-mail open E-mail status indicators are as as are follows: indicators status E-mail content has been deleted from the device. the from deleted been has content The e-mail headinghas been readthe and message read. been has message e-mail The device. your to retrieved been not has it and read, been has message e-mail The to your device. retrieved has been new e-mail The device. your to retrieved been not has mode) online or (offline e-mail new The Options > Print . Options Options > Retrieve > Attachments . . Options select mailbox, remote the in it retaining still while deleteTo the contentsof an e-mail message fromdevice the e-mail messages Delete select automatically, messages retrieve To Retrieve e-mail messages automatically E-mail settings E-mail select deleteTo an e-mail from the device and the remote mailbox, the status. update to again mailbox remote to device the from ayour connection then make mailbox, well, you must delete the e-mail message from your remote in yourstays to the heading device. If youas remove want Although you delete the message content, the e-mail heading mirrors devicee-mailThe the remote headingsmailbox. in the provider for information about data transmission charges. data transmission about information for provider Contact your service provider's service network. your data through of amounts large of transmission the involve may automatically e-mail to retrieve device the Setting retrieved. are messages the often how and Always enabled automatically deleted from the remote mailbox. If you are are you If mailbox. remote the from deleted automatically is it mailbox, remote the to connection next the During device. your from first deleted is e-mail the offline, are you If Phone and server Options > Delete > > or or . In Delete Automatic retrieval . Only in home net. home in Only Delete msg. from: . In Delete msg. from: msg. Delete > , and define when when and define , , select Header retrieval Header Options Phone only , select , select > > . 3 4 provider in a configuration message. configuration a in provider service your from settings obtain may also You provider. given by your service instructions Follow the asterisk. 2 Fill in all fields marked with with marked fields all in Fill settings Messaging 1 device. your in folder a to them copy must you messages, SIM view can you Before a View messages on card SIM select mailbox, remote the to connection data the end to online, are you When from Disconnect the mailbox ),and select the next connection ( during deleted to be marked been has that e-mail to an scroll server, and device the from e-mail an deleting To cancel mailbox. remote the to connection closed the you have after only removed are deleted be to marked messages protocol, the POP3 using Select messages. mark messages, open the folder. the open messages, To select start a copying, and folder Select I messages SIM In the In the Options Messag. Options . main view, select select view, main > > Mark/Unmark Copy Options . A list of folders opens. Must be defined be Must > Disconnect > Options Options Mark OK . To view the the view . To or or with a red > . Mark all Mark > Restore to to . be able to change, create, edit, or remove them. remove or edit, create, change, to able be not may you and provider, service your by device your for may be preset points or centers access or all message Some ytentok e Cneto" .100. p. "Connection", See the network. by supported if data, or packet network GSM messages: text conn. Preferred provider. service your Contact formats. other these into that your message center is able to convert text messages as sent Message period, is the message from center. deleted the message the within validity be cannot reached If the recipient service). (network fails attempt first if the message your resends validity Message service). (network messages your on reports Receive report messages. text deliver to centerMsg. in use Press , and select select , and Press messages Text encoding system when Character encoding that have been defined. Message centers Text msg. and and the following: from —Select whether the network sendsdelivery —Select the connection usedfor sending —Change this option only if you are sure you are only sure if option this —Change —View a list of all text message centers centers message text all of list a —View —Select how long the message center center message the long how —Select —Select which message center is used — To use character conversion to another Messag. available, select > Options Reduced support Reduced > Settings > . 49 Messaging 50 Messaging mode message: message: size Image message Multimedia Press , , Press and Multimedia messages select number (networkservice). center message text same the using sent be to message ctr. same via Reply receiving multimedia messages may cost you more. you cost may messages multimedia receiving and sending network, home your outside are you When center. message multimedia the in retrieve can you that message multimedia is a there that notification network select network, home your in automatically messages multimedia receive To messages. multimedia retrieval Multimedia center. message multimedia the for connection preferred the Access point inuse be supported. not may that messages sending from you prevents device be supported by the recipient. Select Select the recipient. by supported be not may that message a send to try if you you informs MMS creation mode MMS creation is set to to set is . Outside your home network, you receive a a receive you network, home your Outside . Original —Define the size of the image in a multimedia multimedia a in image of the size the —Define Guided (shown only when the the when only (shown —Select whether you want the reply reply the want you whether —Select —Select which access point is used as as used is point access which —Select Messag. and from the following: from and —If you select select you —If —Select how you want to receive receive to want you how —Select or Free ), > Small Options Guided Restricted , or , or > MMS creation creation MMS Large Auto. inhome Settings , the device device the , . ; the ; the > settings settings: Mailboxes E-mail , Press and E-mail select If you select select you If period, the message is deleted from the message center. the message from deleted is message the period, validity the within be reached cannot recipient the If service). (network fails attempt first the if message your resends validity Message messages. multimedia received of reports delivery sending from device your sending report Deny possible. be not may address an e-mail to sent been has that message of a report multimedia a delivery Receiving service). log (network the in shown be to message sent Receive report advertisements. message multimedia Receive ads messages from an anonymous sender. Allow anon. msgs. home network. your both in and outside message the to retrieve connection data packet active an makes automatically device your and from the following: the and from , and , and Connection settings —Select a mailbox to change the following following the change to a mailbox —Select —Define whetheryou want to receive Multimedia retrieval Multimedia Automatic retrieval Automatic —Select whether you want the status of the the of status the want you whether —Select —Select how long the message center center message long the how —Select —Select whether you want to reject to reject you want whether —Select —Select whether you want to prevent Messag. , > User settings User Options . > Always automatic > Settings , Retrieval Retrieval > , are options The recommends. provider service mailbox remote type Mailbox name Mailbox Access point in use e-mail. your receives that server mail the serv. mail Incoming mailbox. to your remote connect to try you when password the for prompted are you blank, Password provider. service name User Incoming e-mail select receive, you e-mail the for settings the edit To Connection settings view. main mailbox the select mailbox, a new To create e-mail. sending use in Mailbox the connection to the remotemailbox. Security (ports) mailbox. your to connection a new make and disconnect you must messages, e-mail latest see the To online. are you when automatically updated not are messages e-mail protocol, the POP3 use you If settings. the mailbox from or exited saved have if you changed be and cannot once POP3 and and —Enter your password. If you leave this field field this leave you If password. your —Enter —Enter your user name, given to you by your by your you to given name, user your —Enter —Defines the e-mail protocol thatyour IMAP4 —Enter a name for the mailbox. the for name a —Enter — Select which mailbox you want to use for to use want you mailbox which Select — —Select the securityoption used to secure and from the following: the and from Slc nIP e Cneto" .100. p. "Connection", IAP. —Select an See —Enter the IP address or host name of name host or address the IP —Enter . This setting . setting This only can be selected Options > New mailbox New in and The settingsThe for Access point in use information. more for provider service your Contact provider. service your of server outgoing the use to able only be You may e-mail. your sends that server mail the serv. mail Outgoing to thisaddress. provider. toby are service Replies messages your sent your My e-mailaddress e-mail To edit the settings for the e-mail you send, select mailbox. the to connecting while server e-mail remote the to passwords of sending the encrypt to protocol login secure APOP Port Select Select Send message function. this supports device e-mailaddress in the recipient’s devicerecipient’sthe when name My User settings mailbox is available. is mailbox conn. select you when Port —Define a —Define forport the connection. , e-mail is sent when the connection to the remote remote the to connection the when sent is e-mail , Immediately and from the following: the from and aresimilar to the ones in —Enter your own name. Your name replaces your your replaces name Your name. own your —Enter —Define how e-mail is sent from your device. device. your from is sent e-mail how —Define User name User Send message Send Slc nIP e Cneto" .100. p. IAP. "Connection", —Select See an for the device to connect the to mailbox —Enter the e-mail address given to you you to given address e-mail the —Enter (for POP3 only)—Use with the POP3 the with only)—Use POP3 (for —Enter the IP address or host name of of name host or address IP the —Enter , Password . If you select . If you select Incoming e-mail , Security (ports) During next Outgoing . , 51 Messaging 52 Messaging and how often, the messages are retrieved. are messages the often, how and when, define can You automatically. e-mail new retrieve retrieval Header Automatic retrieval retrieved: to retrieve E-mail Retrieval settings language. to Default encoding mailbox. the to received is mail new when note, and a a tone indications, e-mail the new New e-mail alerts messages. e-mail your to signature Include signature in defined address the to and mailbox remote your to e-mail the of copy self to copy Send those folders. those from content retrieve and mailbox remote the in folders subscriptions Folder be to subscribed. folders for path path folder IMAP4 are to the retrieved mailbox. Retrieval amount Headers only —Select whether you want the device to to device the want you whether —Select —Define how many new e-mail messages —Select another encoding according according encoding another —Select —Select whether you want to attach a to attach you want whether —Select —Select whether you want to save a a save to want you whether —Select My e-mail address —Define which parts of the e-mail are are of the parts e-mail which —Define —Select whether you wanttoreceive (for IMAP4 only)—Define the folder folder the only)—Define IMAP4 (for (for IMAP4 only)—Subscribe to other only)—Subscribe (for IMAP4 , Size limit , or . Msgs. & attachs. Msgs. . receive messages: messages: receive Language broadcast messages. Reception withoutname a to thetopic list. searchesnewtopic for numbers, and saves the new numbers detection Topic provider for information about data transmission charges. data transmission about information for provider Contact your service provider's service network. your data through of amounts large of transmission the involve may automatically e-mail to retrieve device the Setting Options your service provider. Press , and select select and , Press provider. service your with numbers topic and related the available topics Check Cell broadcast , Press and messages Web service select message, select service a you receive when content retrieve to connection automaticallyactivate thebrowser and start a network to device the set to want you If messages. service Service message > —Select the languages in which you want to to want you in which languages the —Select Settings —Select whether you want to receive cell to receive you want whether —Select —Selectwhether the device automatically Download messages Download . Select whether you want to receive receive to want you whether Select . All > Cell broadcast , Messaging Selected , or , or > Options and from the following: Other > Automatically . Messaging > Settings . > > Press , Press and Other settings select that you send to the or e-mail messages, multimedia text messages, of the copy messages sent Save Other and from the following: the from and —Select whetheryou want to save a Sent Messaging folder. > Options > Settings > save your messages. your save in the device, select select device, in the in use Memory deleted. is message oldest the reached, is limit the When messages. 20 is saved to the are msgs. of saved No. —If a compatible memorycard is inserted Sent —Define how many sent messages messages sent many how —Define Phone memory Phone folder at a time. The default limit limit default The time. a at folder or Memory card to 53 Messaging 54 Make calls To call, press . Select call .the type Select press call, To listed. are contacts Matching field. search the to name the of letters the first enter or name, the desired Scroll to Voice calls Voice Make calls To make a call from ends always a call, even if another application is active. Pressing 3 2 1 mode. p. "Modes", See 11. view and mode fold-open the in calls voice make can You rs or close the cover to end the call (or cancelto attempt). call the to call number. the Press Press number. phone and necessary), if zero leading the (omit code area code, country the enter and the for twice code), access international the (replaces character press calls, international For . To aremove number, press the area in code. including mode, the standby number phone the enter fold open, the with call, voice a start To call, press or . If you have set the volume to to volume the set have you If . or or Mute keys. press call, Tip! To increase or decrease the volume during a during the volume or decrease To increase o a tl duttevlm ihte the with volume the adjust still can , you Contacts , press , and select , , press Voice call Voice Contacts . +

. To call your voice mailbox (network service), press and hold p. 65. contacts", "Copy See way. this call a make can you before 2 1 call a conference Make 3 You mustYou copy the contacts fromyour SIM card to the number. press mode, standby the in number dialed recently call a To in the standby mode. See also "Call forwarding", p. 106. p. forwarding", also "Call See mode. standby in the New call select participant, to another call a make To participant. first the to call a Make Options select and 2, step repeat call, the to person a new add To in conference call,the select the first join participant to answered, call the new is When participants, including yourself. including participants, six of maximum a calls between conference supports . Scroll to the number you want, and press to call call to press and want, you number the Scroll to . mailbox, press , and select , and select press mailbox, Tip! Options (obtained from your service provider), and select select and provider), service your from (obtained > To change the phone number of your voice voice your of number phone the To change . The first call is automatically put on hold. on put is automatically call first . The Conference > Change number > Add to conference Add Options . Enter the number number the . Enter Tools > Conference > Voice mail Voice . Your device Options Contacts . OK > >

. 4 keys ( — ), press , and select select and , press ), — ( keys 1-touch-dialing the of one to number phone a To assign creates a voice tag for the entries in contacts, and compares you do not record voice tags in advance. Instead, the device voice; on the speaker’s dependent are not commands voice Your device supportsenhanced voice commands. Enhanced Voice dialing Settings select , and press dialing, 1-touch To activate 1-touch dialing and . key the 1-touch-dial press mode, the standby in To call the voice mailbox. number, and select select and number, phone the assign to want you which to key the to Scroll oedteatv ofrnecl,pes . press call, conference active the end To the private conversation, select select conversation, private the finish you When call. conference the continue still can participants other The device. your on hold on put is call participant To drop a participant, select conference Select a participant, and select select aand Select participant, participants, select select participants, the of one with conversation a private have To > Call , scroll to the participant, and select select and participant, the to scroll , to return to the conferencecall. > 1-touch dialing 1-touch Options Options > Options Assign > Conference Private > Options > . is reserved for for reserved is . On Tools Conference . . The conference conference The . > > Spd. dial Spd. > Add to Add Private Drop Tools > Drop . > . . voice tag, open a contact card, and select select and a contact card, open tag, voice synthesized the to To listen card. contact the on saved is that or nickname name is the contact for a tag voice The better. commands voice the recognize to voice user’s main the to adapts device the in recognition voice The it. to tag voice spoken the voice tag voice Make Make a call with a voice tag 3 2 1 tag. voice you say the when away at distance short device a the Hold use. is in loudspeaker the dialing, voice use you When the device dials the number. the dials device the a timeout of 2.5 seconds, After and number. name the displays and language, device selected in the contact The device plays a synthesized voice tag for the recognized card. contact on the is saved that or nickname name the clearly Say and played, is tone short A dialing. voice with headset compatible a using are you If . the headset key, press and hold the headset key to start hold and press mode, standby the in dialing, voice start To not rely solely upon voice dialing in all circumstances. all in dialing voice upon solely rely not environment or during an emergency, you so should Note: . Using voice tags may be difficult in a noisy noisy a in difficult be may tags voice Using Speak now Speak is displayed. is displayed. Options > Play 55 Make calls 56 Make calls (home) is another voice, video, or data call active. data call or video, voice, is another there made while be Video calls cannot or an ISDN client. phone mobile a compatible to be made can call video The parties. two between made be only can call video A provider. service your contact services, call video to subscription and of For availability network. UMTS of a coverage be in the and card USIM a have must call, you video a to make be able To recipient. video call the to is shown device in your camera by the captured image or video image, video live The call. the of recipient and the you between video two-way a you can real-time, video call, see a you make When mode. view the use calls, video For hands-free mode. p. "Modes", See 11. and view mode fold-open the calls in video can make You the United States of America. in networks with compatible is not feature call video The service) calls (network Video Mobile following: of the number first available the selects device selects the default number, if it has been set. Otherwise the device the name, the under saved are numbers several If cancel voice dialing. voice cancel Next select correct, not was contact recognized the If , , and , and Mobile (home) Mobile to view a list of other matches, or or matches, of other list a view to Tel. (work) , . Mobile (work) Mobile , Telephone Quit to , Tel. Tel. may deny video sending ( ), in which case you hear hear the case you ), in which sound and may see a still image or a grey background graphic. ( video sending deny may hearthe sound through the loudspeaker. The callrecipient and images, video two you see call is active when video The instead. message a or send call normal a try to want you if asked are you compatible) is not device receiving calls video are supported not by the network, or the image a while. a videotake Starting call may call. the answered has recipient the viewmode after thecall activate call, video hands-free a make to want you If 1 100. p. settings", "Call see instead, image still a send it). transmitting not is network or the video sending Icons: 2 Video call Select Select Contacts select or mode, standby the in number phone the enter open, fold the To start a video call, with You are not receiving video (the recipient is not is not recipient (the video receiving not are You You have denied video sending from your device. To device. your from sending video denied have You is shown. If the call is not successful (for example, example, (for successful not is call the If shown. is Options and a contact. . > Call > Waiting for video video for Waiting you activate thep. 58. correct mode. video", See "Share automaticallythe when recipient acceptsinvitation, the and orvideo, a video clip you want to begins share. Sharing live the to view a recipient invite Simply call. voice a during device mobile compatible another to device mobile your oedtevdocl,pes . To the end call,video press provider. service your with the pricing Check call. a video as charged be still call will the a video during call, video sending if you have Even denied To zoom your own image, select select image, own To zoom your Use of States America. United in the networks with compatible is not feature video sharing The service) (network sharing Video on the display, select select display, the on video images and received the sent places of the To switch display. the of top the on is shown indicator zoom select sound, only or hearing video showing between To change or or Sending audio & video & audio Sending Video sharing Enable al rs r . or call, press Tip! To increase or decrease the volume during a during volume the decrease or increase To or Disable to send live video or a video clip from from clip a video or video live send to Change image order image Change > . Sending video Zoom in Zoom or , Sending audio Sending . Zoom out Zoom . The , application. To use use To application. this using with associated fees and availability network about questions for provider service your Contact availability. Ensure that • • Ensure that both the sender and recipient are are recipient and the sender both that Ensure • are and connection UMTS active an have you Ensure • • Ensure that your device is set up for person-to-person person-to-person up for is set device that your Ensure • ability to use use to ability Because Video sharing requirements recipient cannot accept the invitation. the accept cannot recipient the that message error an receive you However, they not do know thatyouare sendingan invitation. coverage, within network UMTS is not person off, or the sharingto a sessionthat and registeredto the UTMSnetwork. If you invitesomeone continues. call voice your but is discontinued, session sharing the UMTS network coverage and a handover to GSM occurs, you are within while session sharing the start you If withinnetwork UMTS coverage.See "Settings", p. 58. p.58. "Settings", See connections. Video sharing Video sharing Video Video sharing Video Video sharing Video requires a 3G UMTS connection, your depends on 3G network network 3G on depends i ntle nyu oi N93. Nokia on your is installed you must do you must following: the person’s phone is turned is person’s phone turned 57 Make calls 58 Make calls Add detail Add (or start a new card for that person). Select card contact the and open menu, main device your from • Ensure that your device UMTS access point connection connection point UMTS access device your that Ensure • Contact your service provider to establish an agreement • following: do the UMTS connection, your up set To settings connection UTMS name). a domain of instead address an IP can use (you sip:username@domainname on your contact card for that person. Open Open person. that for card contact your on If you know a SIPyou can address, itrecipient’s enter air. the over settings the you send may provider service Your in your device. them save and profile settings, SIP the for provider service your Ask asession. sharing phone. The SIP profile also bemust established to receive to another compatible connection live person-to-person sharing use can you before device in your configured be must settings SIP profile The (SIP) connection. protocol initiation as a session is also known connection A person-to-person settings connection Person-to-person Settings "Connection", p. 100. p. "Connection", see help, For properly. configured are settings for you to usethe UMTS network. . Setting up a SIP profile allows you to establish a establish to you allows profile a SIP up Setting . > SIP . Enter the SIP address in the format format the in address . SIP the Enter Contacts Options Video

> 1 Live video coverage. network UMTS the within and be connection, active UMTS an have service, to the registered be must you invitations, share receive To sharing. can you start before service the to registered be both must recipient the and You device. sharing To receive sharinga session, the recipient must install video Share 2 3 When a voice call is active, select select active, is call voice a When a SIP address. Select Select address. a SIP enter available, not is the recipient of SIP address theIf video the invitation, and and invitation, the send to you want to SIP address which select the card, in the contact SIP addresses recipient has several If the recipient. the of card contact the to added have to the SIP sends The device the invitation you address while you share live video. live share you while call voice your continue to headset compatible a use also can You active. is loudspeaker The invitation. the Sharing begins automaticallywhen the recipientaccepts and configure the required settings on their mobile their on settings required the configure and > Live . Select OK to send the invitation. invitation. the send to to sendthe invitation. Options > Share Video 5 1 clip Video 4 2 3 4 To end the sharing session, select select session, sharing the To end sharing. to resume When a voice call is active, select select active, is call voice a When Select opens. To preview the clip, select select clip, the preview To opens. view preview A share. to want you clip video a Select clips opens. of video A list video . press call, for sharing. Continue? Continue? for sharing. formattobe able to share it. suitable a clip into video the convert to need may You Select a SIP address. Select enter available, not is recipient of the address the If SIP the invitation, and and invitation, the card, select the SIP address to which you want to send the contact in addresses SIP has several If the recipient have added to the card of contact the recipient. you address SIP the to invitation the sends device The the invitation. the accepts recipient the when automatically begins Sharing > Pause Options Clip to pause the sharing session. Select Select session. sharing the pause to . > Invite Select OK . to send the invitation. the send to appears. Select to send the invitation. invitation. the send to Clip must be converted converted be must Clip Stop Options Options . To end the voice voice the end To . OK > > . Play Share Share Continue .

To end the sharing session, select select session, sharing the To end to the decline and disconnect session sharing voice call. the press also You can invitation. the you declined that message Decline mode. view the activate video, live share to Accept you can select: invitation, an you receive When invitation. an received you that know not will you coverage, network UMTS within If someone sends you a shareinvitation you are and not invitation. an receive you address. If your device is not set to set not is device your If address. SIP or name sender’s the showing displayed is message invitation an invitation, share you a sends someone When Accept an invitation clip, select select clip, 5 6 Options Select To end the sharing session, select select session, sharing the end To al rs . call, press — to begin the sharing session. If the sender wants wants sender the If session. sharing the begin — to — to decline the invitation. The sender receives a receives sender The invitation. the decline — to Pause Exit > Continue . to pause the sharing session. Select Select session. sharing the pause to Video sharing ended sharing Video to resume sharing. resume to Stop Silent Stop . If you sharea video is displayed. is . To end the voice , it rings when when , it rings 59 Make calls 60 Make calls When a video call arrives, is displayed. displayed. is arrives, call a video When Answer or decline a video call . If opened fold if Answer press mode, fold-open the call in the answer To uoaial.Ohrie pntefl,adpes . select in, comes call a when tone the ringing mute To press and fold, the open Otherwise, automatically. call starts and the fold, the open mode, fold-closed In the fold-open mode, press to answer the video video call. the answer to press mode, fold-open In the Answer or decline or decline Answer a call cannot answer the call. Select cannot answer can also send a text message to the caller informing why you When you decline an incoming call with the fold open, you p. 106. call. "Call forwarding", See the forwards also call incoming an declining calls, forward If tone. busy line a hears caller The it. decline to the activated you have press mode, fold-open the in a call, to answer want not do If you a standard text message, see "Call settings", p. 100. settings", a standard text message, see "Call write and option this set up To it. sending before the text edit Press , and select select , and Press Tip! Options ede key. headset the press a call, end and answer to device, Tip! If a compatible headsetis connectedtothe You You can assign a tone forringing video calls. > Customize is set to Call forward Call Tools Options > Yes Video call tone > , to answer a call in the in the call a answer to , Profiles > > If busy Send msg. , a profile,, and function to to function . . You can Silence . a still image, see "Call settings", a still settings", image, see "Call with screen the grey replaceTo the video. place of in shown is screen A grey person. other the hear still can but you possible, If you do not activate the view mode, video sending is not unit camera the turn to the direction from youwhich want to send the video image. image, video live a send to want you If caller. the to shown is device your in camera by the captured image, video clip,recorded video or the being image a live and mode, view the video, activate start sending To if you have activated in progress call another you have while call a answer can You service) Call waiting (network pn rs . press open, fold the with or mode view the in call, video the end To provider. service your with pricing the Check call. video a as charged is still call the a call, during video denied video ifsending you Even have Call To switch between the two calls, select select calls, two the between switch To is put call first . The hold. on press call, waiting the answer To Options the calls. To end the active call, press . To end both both To end . select calls, press call, active the end To calls. the from yourself to disconnect call and an active hold with on > Call waiting Call > Transfer Options . to connect an incoming call or a call call a or call incoming an connect to > Call waiting Call End all calls all End Image in video call in . Tools Swap > . Select . Select Settings , p. 100. , p. > ( Contacts in it for or search string tone touch the Enter password. tones touch Send a to file the send to device. compatible Press sending. before recipient of the call. You can edit and the message the change participant other the to message multimedia a in video a Send MMS call. waiting the Replace the following: on device, availableincluding options your Select Select call a video Options during are network services.Select call voice a during use can you that options the of Many call a voice Options during Enable is attached). Activate handset mode). view in both or p ), press repeatedly. Select Select repeatedly. press ), Options or Tip! or or —To end an active call and replace it by answering it by answering an active call and replace end —To . To enter a wait character ( character wait a enter . To Disable Touch tones (in UMTS networks only)—To send an image or image an send only)—To networks (in UMTS You can add touch tones to the during a video call for the following options: options: following the for call video a during (audio in the fold-open mode; video, audio, audio, video, mode; fold-open the in (audio —To send touch tone strings, for example, a (if a headset with Bluetooth connectivity fields in a contact card. Options OK w to send the tone. the send to during a call for the the for call a during ) or a pause character character pause a ) or Phone number

h vn,adpes . press and event, the list Clear logs, open the log you want to erase, to the log you want logs, erase, and select open calls To clear all recent call lists, select select lists, call recent all clear To on, and within the network service area. is switched device the functions, these supports network calls dialed calls, press , and select select , and press calls, dialed and of received, missed, the To numbers phone monitor Recent calls Zoom in Zoom order image Change End active call compatible headset withBluetooth connectivityis attached). handsfree Activate in the recent calls main view. To clear one of the call call the of one clear To view. main calls recent the in . The device logs missed and received calls only calls only if the and received logs missed The device . ubr n rs . press and number, or name a to scroll back, To call calls. missed of about missed calls, select select missed calls, about Tip! or or . To clear an individual event, open a log, scroll to to a log,. event, open scroll To an individual clear When you seeanote in the standby mode Zoom out Zoom Log (fold-open mode only, and if a if and only, mode (fold-open (view mode only). mode (view My own My Show Options to access the list > > Log Clear recent recent Clear Options > Recent > 61 Make calls 62 Make calls Icons in in Icons Monitor all communication events select , and press connections, data To check the amount of sentdata and received during packet Packet data and select , press calls, outgoing and incoming of your duration approximate the monitor To Call timers data connections by the amount of data sent and received. and sent data of amount the by connections data data Packet duration select select active, is call a while duration call the of display the set To timers Call To clear call duration timers, select select timers, duration call To clear SIM", p. p. 104. SIM", lock code the you need For this Missed communication events communication Missed Outgoing Incoming Connect. features, rounding off for billing, and so forth. and billing, for off rounding features, network on depending vary, may provider service Note: Log > . . For example, you may be charged for your packet packet your for charged be may you example, For . Yes : The actual time invoiced for calls calls by your for invoiced time actual The or or > Log No . > Options ; see "Security", "Phone and "Security", "Phone see ; > Options Settings My own My My own > > Clear timers Clear Show call > > Log Log > > . To filter the log, select log, select the filter To connections. data packet as shown pages or are web center, messaging multimedia communication event.Connections to your mailbox, one as logged are data connections, and packet part Subevents, suchas a text message sent in more thanone own , select press device, logged by the connections or data text messages, calls, video and voice all monitor To new contact cards based on the log information. information. log the on based cards contact new and create event of type one just view to log general the or access point. filter can You provider, service the of name phonerecipient name, number, see the sender or can you event, communication each For log. general the select > Log Settings display during an active call, select select call, active an during display Tip! select select Tip! n rs to , and press To view a list of sent messages, press , and , and press messages, of sent a list view To To see the duration the duration of To see a voice call on the main Messaging > Show call duration Options My > Sent > . Filter > and a filter. and Yes Options . > Clear log select permanently, reports delivery messaging and log, calls recent the log, of contents the To erase To set the . the press log, from erased to free memory. If you select select If you memory. to free erased a set number of daysafter which they are automatically duration are permanently deleted. permanently are reports delivery messaging and calls log, recent contents, . The log events remain in the device memory for for memory device the in remain events log The . . Select Log duration Log Yes to confirm. To remove a single event event single a remove To confirm. to , select , select Options No log > Settings , all the log log the all , Options > Log Log > Options by indicated event outgoing or incoming an to scroll lasts, connection data packet certain a long how and is transferred kilobytes, in measured data, much Packetcounter data connection and timer eea o iw colt neet n rs . press and event, an to scroll log view, general To viewthe details of a communicationevent, in the the clipboard, select select clipboard, the Tip! > View details View In the details view, to copy a phone number to number copy a phone view, to the details In . Options > Copy Number Copy Pack. : To view how how view : To , and select . 63 Make calls 64 Contacts (phonebook) compatible devices. devices. compatible from received or to sent be only can information Contact 46. (business cards) tocontacts. "Data Seesettings", and p. information contact received add can You time. same tosend text messagesor e-mail to many recipients at the you allow which groups, contact create also can card. You personal or totone a ringing aimage thumbnail contact 2 To delete a contact card in card To delete a contact select and edit, to want you card in cards contact edit To 1 numbers and names Save , Press and select . To delete several contact cards at the same time, press Fill in the fields that you want, and select and you want, select that Fill in the fields Select Select ad t aktecnat,adpes to delete. to mark the contacts, and press and Contacts Editor available inNokia PC Suite. Tip! or HP Photosmart 8150), select select 8150), HP Photosmart or connectivity (suchHPDeskjet as 450Mobile Printer Bluetooth printer with profile (BPP) equipped print Tip! Options Contacts (phonebook) To add and editTo add and cards, contact use Nokia To print contact cards on a compatible basic on aTo cards compatible contact print > Contacts New contact Contacts Contacts . In . In ,scroll to thecontact Contacts Options . , select a card, and press press and card, a select , Options > you can add a Edit Done > . Print . . the contact card, and select To attach a smallthumbnail image to a contact card, open contact calls. contact thumbnail Add memory in groups, and the available theof amount contacts, To view 66. groups", contact p. "Create See a group). created have you if only (shown To add a contact to a group, select number is also used in voice dialing. voice in used also is number default The or address. number to a certain contact the to message a send or call easily can you addresses, or numbers several has contact a if way this In card. to a contact addresses or numbers default assign can You and addresses numbers Default youwant to send. Select Tip! 55. to eight phone numbers. See "1-touch dialing", p. used numbers. You can assign 1-touch-dialing keys Tip! text message text aa,p 82. data", p. Via infrared Contacts 1-touch dialing 1-touch quickcallto is a way frequently To send contact information, select the card card the select information, contact send To . The thumbnail image is shown when the the when is shown image thumbnail The . . See "Messaging", p. 41 and "Send and "Send 41 p. "Messaging", See . , select , Via multimedia Options Options Options Options > > , Contacts info Contacts Edit Via Bluetooth Via > > Add to group: to Add Send > Options > Via . , or >

provider or other vendor. other or provider service the be may This vendor. card SIM your contact services, card SIM on using information and For availability SIM directory services and select and , press device, your to card a SIM from numbers and names To copy Copy contacts 2 1 contact card. contact in the is underlined or address number default The 4 3 Options select and , Contacts press card, SIM your to contacts To copy and copy contacts by your SIM card are copied. are card SIM your by directory SIM To Select . press and contact, a select book, address the In Select number a or an address you want to set as a default. select and address, an or to want add a number you to which Select a default compatible PC with Nokia PC Suite. Suite. PC Nokia PC with compatible Tip! > . Select the names you want to copy and copy to want you names the Select . > Options Options Copy to SIMCopy to direct. You can synchronize your contacts to a a to contacts your synchronize can You SIM directory SIM . Only the contact card fields supported supported fields card contact the . Only > > Copy to Contacts Copy Defaults Assign . Selectthe names you wantto Contacts . , or , or . Options . > Options > Copy > SIM > official emergency number programmed into your device. your into programmed number emergency official to the possible be may calls is activated, dialing fixed When on the fixed dialing list. included be must number phone recipient’s the and number center message case, the In this data connection. packet a over messages text sending when except possible, not When you use codethe PIN2 You forneed these functions. rs , and select Press 2 1 it). recognizes your device and call the with is sent number telephone the caller’s (if tone ringing the chosen plays the device you, calls member group or contact a When for contacts tones Add ringing to the fixed dialing list, select select list, dialing fixed the to select select To restrict calls from your device to selected phone numbers, card. SIM your by supported if shown only SIM contacts To view the list of fixed dialing numbers, select select numbers, dialing fixed of list the view To calls. make can you and contacts, to numbers copy or add, edit, can you directory SIM the In card. SIM SIM directory Select list, the or groups go to a contact card open to group. contact a select and Press oe opens. tones Options Options to see the names and numbers stored on the > Fixed dialing Fixed > Fixed dialing contacts Fixed dialing Activ. fixed dialing fixed Activ. > Contacts Ringing tone , packet data connections are Options > Options . A of list ringing . To add new numbers numbers new add To . > New SIMcontact . This setting is setting . This > SIM contacts Options > > . 65 Contacts (phonebook) 66 Contacts (phonebook) list of ringing list of ringing tones. 2 1 groups contact Create select tone, ringing the remove To 3 3 4 5 Select Select In group. selected or the contact individual Select the ringing tone you want to use for the Group name the default or use group the for a name Write Open the group, and select and select group, the Open the contacts you want to add. to want you contacts the add To it. mark to on all this action repeat a at members time, multiple press and a contact, to Scroll Contacts , and select select , and Options , press to open the groups list. the groups open to press , > New group New OK . Options . Default tone Default > Add members from the the from . 6 2 1 group a from members Remove To rename a group, select select a group, rename To new name, andselect 3 Select Select Scroll to thecontact, and select modify. to want you group the open list, groups the In from group from Select Select to groups select and contact, the to scroll Tip! OK Yes To check to which groups a contact belongs, belongs, a contact groups which to check To to add the contacts to the group. to remove the contact from the group. the from the contact remove to . . OK . Options > Options Rename Options > , enter the the enter , Remove Remove > Belongs 1 Enter settings manually provider. your service contact information, more For 46. p. settings", "Data and See page. web the special text message from the service provider that offers that you want to use. You may receive the settings in a page the for settings service web need you pages, access To access point Web , Press services. their use to how on and instructions you give also will providers Service provider. service your select with fees and pricing, of availability services, the Check (XHTML),language or hypertext language markup (HTML). markup hypertext extensible (WML), language markup wireless the use pages These devices. mobile for designed specifically pages maintain providers service Various Press , , Press select evc rvdr e Cneto" .100. p. "Connection", provider. service See your by you to given instructions the Follow point. points Access your service yourprovider. service Tip! in the standby mode. standby in the Shortcut: Settings may Settings be available on the of website Services T tr oncin rs n od To start connection,a press and hold , and define for, the settings an and define access Tools Services > Settings . > Connection > access point. access site. internet any with samethe precautions, forsecurity or content, youwould as take should you them, to access choose If you sites. these affiliated withNokia. Nokianot does warrant endorse or not sites loaded for bookmarks some have may device Your gateway or server is or encrypted. server gateway a connection, displayed during is between and thethe internet device the data transmission indicator the security If security Connection open you when opens view bookmarks The view Bookmarks 3 2 current accesspoint. the for defined the page of the address and bookmark point, select select point, access default the as point access created the set To Press , and select select and , manager Press indicates the starting page defined for the default the for defined starting page the indicates > Add bookmark Add Options Services > Settings . Write a name for the the for name a Write . > Options > Access point Access Services > Bookmark Bookmark . . 67 Services 68 Services Browse Select server. content the and gateway the between data transmission the secures provider service The is secure. stored) is resource requested the where server (or place content the and gateway the between security The icon does not indicate that data the transmission evc rvdr e lo"etfct aaeet,p 105. p. management", service See provider. "Certificate also your contact information, more For services. banking as Security certificates may be required for services, some such authentication. user and server about information and status, encryption the connection, ooe ik n aeslcin,pes . press selections, make and links open To them. around border blue a have links as act that Images purple. in links visited previously and On page, a links appear in blue new underlined browser ). address in the field ( enter the or a bookmark, select a page, download To Options and to the beginning of a page. of beginning the to and Shortcut: software. harmful against protection security and adequateoffer Important: > Details Press to jump to the end of end a page to the jump to Press Use only services that you trust and that > Security to details view about Options select server, the from content latest the retrieve To session. a browsing during History Back select browsing, pageTo go to while the previous options To save a bookmark, select To save a select bookmark, browse them when offline. To access the pages later, press later, pages press the To access offline. when them browse and (if card inserted), memory or compatible a memory To enter a new URL address, select select address, URL a new enter To To save a page while browsing, select select browsing, while a To save page options displayed. To view the list, select select list, the view To displayed. is session browsing the current from downloads completed and paused, of ongoing, list astart a download, you When . to the link,and press an item, and Toscroll clips. download themes, video logos, operator images, tones, ringing as such page, browser on files bethat can cannot shown the You download Downloads save, orsave, delete downloads. completed open, or downloads, ongoing cancel or resume, pause, to in the bookmarks view to open the open to view bookmarks the in is not available, select to view a chronological of visited list the view pages to a chronological you press and hold . To return to the browser view, view, the browser to To return . select and hold press Tip! > > > Save page Save Go to web address web Go to Navigation options . In the list, scroll to an item, and select select item, and to an scroll . list, In the To access the bookmarks view while browsing, browsing, while view the bookmarks To access Options . You can save pages to the device device the to pages save can You . > Back to page Back Options Options . > Options Reload > Options > Navigation options Options Save as bookmark Save . Saved pages Saved . > > Tools > Navigation Navigation Advanced Options Back > view. . If > .

the connection and closethe connection and the browser, select select To end the connection and view the browser page offline, a connection End in saved be can photo downloaded a example, for device, in your applications respective by the handled are provided free, or youpurchase can them. Downloaded items operator logos, themes, and video clips. These items can be images, tones, ringing as such items download can You items purchase and Download 3 2 1 download, select download, select select download, the continue To provided. all information the read Carefully “Buy”. example, for the item, purchase to option appropriate Select the . press and link, the to scroll item, the download To Options Important: passed the Java Verified Java the passed or have Signed Symbian are applications that as such sources, trusted from software other passed the Java Verified Java the passed or have Signed Symbian are applications that as such sources, trusted from software other Important: > Advanced options Only install and use applications and and applications use and install Only Only install and use applications and and applications use and install Only Cancel . TM TM testing. testing. > Accept Disconnect Options . To cancel the the cancel . To Gallery , or to end > Exit . . later during browsing, select select later during browsing, select select view, bookmarks the from folder the hide but bookmarks automatic collecting continue to want you If collecting. bookmarks Auto. you can select another encodi Default encoding Font size Select Select settings Web select cache, the empty To cache. the in stored are accessed cache after each use. The information orservices you have the empty passwords, requiring information confidential accessed or have access to tried have you If temporarily. data to store that is used location is aA cache memory device. the of memory cache the in stored are accessed you have services or information The Empty the cache images while browsing. If you select If you select browsing. while images sounds & imgs. Load them. remove or edit, create, change, to able be not may and you provider, service your by device your for preset be may points access or all Some 100. p. "Connection", point Access Hide folder Options Options —Select the text size. text the —Select —Change the default access point. See the point. See access default —Change > > —If text characters are not shown correctly, shown not characters are —If text Advanced options Advanced Settings —Enable or disable automatic bookmark bookmark automatic disable or —Enable . —Select whetheryou want to load and from the following: the and from ng according to language. Options > No > Clear cache Clear , to load images , to load images Show images Show . . 69 Services 70 Services Select. keys only keys Select. size Screen as possible when in the in the when possible as Rendering level. volume a select pages, on web Volume browsing. when or view, bookmarks you select page Search Homepage to be downloaded, select select to be downloaded, quality . If you do not want external cascading style sheets sheets style cascading external want not do you If . —If you want the browser to playsounds embedded —If you want the page layout shown as accurately as accurately layout page shown the want —If you Navigation options Navigation —Define the homepage. —Select what is shown when you are browsing: browsing: are you when is shown what —Select —Define a web page that is downloaded when when is downloaded that page a web —Define or Full screen Small screen Small By speed > . Open search page search Open . mode, select select mode, By By in the in the e lo"pin uigaviecl" .61. p. call", voice a during "Options also See voice call. during a tones touch sends device the before tones Confirm touch Security warnings Java/ECMA script cookies. of Cookies —Enable or disable the receiving and sending sending and receiving the disable or —Enable —Enable or disable the use of scripts. use the or disable —Enable —Hide or show notifications. or show security —Hide —Select whether you want to confirm 1 Create calendar entries and to keep oftrack tasks and otheryour notes. Use Calendar , Press and select entry for a day a for entry Memo device) in the defined be must (a mailbox e-mail by request a meeting Meeting request time and date specific a has that appointment an Meeting following: the New entry Calendar press any key ( — ). An appointment entry ).appointment An the — opens, and the characters you enter are added to ( key any press Shortcut: entry opens. —to write a general a general write —to Subject —to remind you of you of remind —to Calendar > to remind you of meetings, anniversaries, anniversaries, meetings, of you remind to and ofone Options In the day, week, or month calendar view, view, calendar month or week, day, the In field. In the to-do view, a to-do note note a to-do view, to-do the In field. —to send > When the calendar alarms for a note, select alarm to snooze, select screen.To end the calendaralarm, select off the calendar alarm tone. The reminder text stays on the the e-mail. the you open when the calendar to is saved the request device, your in mailbox the to request meeting a receive you If requests Meeting 3 2 and enterand the select a or meeting, an appointment for To add a description specific date specific To-do year) every repeated are (entries dates Anniversary To save the entry, select select the To save entry, select alarm, an set To fields. the in Fill Synchronization creatingacalendar entry, set the desired When PC Suite. Nokia PC using compatible Tip! —to remind you remind of—to a task that doing by needs a Options You can synchronize your calendar with a with calendar your synchronize You can —to remind you of birthdays or special or birthdays of you remind —to Alarm time > Add description Add Snooze option. Done and and . . Alarm date Alarm . Stop Silence Alarm . . To set the the set To . > to turn On , 71 Calendar 72 Calendar Calendar views Calendar select e-mail, using request a meeting to To respond calendar. in the or mailbox the in requests meeting received can view You Options select device, to a note compatible Toa send calendar . press today, to jump To date, select a certain go to To . view, day view, and to-do view, press week view, month the between To switch 8 before a.m. the week view, memos anniversaries and are placed In corner. right bottom the in triangle small a with marked are entries calendar have that dates view, month the In Tip! when you open the calendar. the open you when is shown that view the or week the of day starting > Send Select Select Options . Options > Respond: > Settings Options . to change the the change to > Go to date Go . starts on starts To modify To modify settings Calendar in past entries Deleting entries Manage your calendar select 8150), Photosmart or HP Printer Mobile 450 Deskjet as HP (such connectivity Bluetooth with printer (BPP) equipped profile print basic compatible on a entries calendar print To view, and select deleteTo more thanevent one time, at a to go the month memory. device and selectand to view, itto-do in the scroll completed, a as task mark To entries All Options , and Calendar alarm tone alarm Calendar Options . Week view title > Options Print > Mark as done Mark as . Calendar > Delete entry , select , saves space in your your in space saves Default view Default . Options > Before date Before , > Week Settings or . • An internet access point must be defined to access the access to defined be must point access internet An • The station you listen to and the network operator or the • inserted. card SIM valid a have must device The • on. switched be must device The • are required: conditions following the service, Visual Radio the To use Visual Radio. support may not area your in radio stations and operators the service, Radio Visual the to access have not do you If applications. other using while FM radio the to listen can You The Visual Radio service uses packet data (network service). visual information on the display related the to radio program. view you thatservice, can Visual Radio offer to stations tune you If saved stations. and tuning automatic with radio FM traditional a as application Radio Visual the use can You points", p. 101. points", "Access See Radio server. Visual provider’s service wireless service provider you use must support thisservice. Visual Radio(network service) My own call. When the call is finished, the radio is turned back on. back is turned radio the is finished, call the When call. to the radio. The radio is turned off when there is an active You can make a call or answer an incoming call while listening freely. hang it so let radio, of the antenna as the functions of the headset device.lead The in the plugged the headset a compatible headset. Whenusing the loudspeaker, keep or loudspeaker the built-in with radio the to can listen You properly. function needs to beattached to thedevice for the FM radio to deviceantenna. compatible A headsetor enhancement wireless the than other antenna on an depends radio FM The Visual Radio. support may not area your in radio stations and operators the service, Radio Visual the to access have do not you If ID service Radio Visual correct the have must station The • stations", p. stations", 75. "Saved See enabled. service Radio Visual and defined may be extremely loud. extremely be may when the loudspeaker is in use, because the volume ear your near device the hold not Do hearing. your to hi exposure Continuous Warning: Listen to music at a moderate level. level. moderate a at music to Listen gh volume may damage damage may gh volume 73 My own 74 My own freely. Press , and select select and , Press freely. the headset functions as the radio antenna, so let it hang of lead The device. the to headset compatible a Connect area. particular that in radio station the of the coverage on depends broadcast radio of the quality that the Note Listen to the radio . press radio, the unmute or mute To display. cover the on displayed be may information Channel closed. is cover the device when listening for used can be Visual Radio network. the from received information country band based on the The radio the used frequency selects Station directory Station To view available stationsbased on location, select loudspeaker Activate To adjust the volume, press or . To listen to listen . To or select loudspeaker, the using radio the press volume, the adjust To key. number of location the acorresponding press station, the memory or If select saved you have stations, radio previously . Searching select manually, or frequency the To change found. is a station when stops select To asearch, start station to go to the next or previous saved station. saved To select station. next or go toprevious to the Options (network service). (network . > Manual tuning My own > Options Radio . . Options > > select list, station your to station tuned current the save To To view available visual content for a tuned station, select select station, tuned a for content visual available To view provider. service your contact service, the to subscribe to and costs, and availability check To visual content View saved for the station, enter it, or select or select it, enter station, for the saved Start visual service Options select stations, saved your station select background, the in playing radio the leave FM and mode returnTo to the standby 75. p. stations", "Saved the content provider. by designed content visual current the shows display the established, is service visual the to connection the When for it in the station directory(network service). background , or in the stations view, select select view, , stations or in the Options Options . To open the list of list the open . To > Stations rpes . press or , > > Save Play in . See . See . If the visual service IDhas not been Options Retrieve > Station to search > Select Select Settings select list, station your open To Radio. Visual in stations radio 20 to up save can You stations Saved select view, content visual the for settings display adjust To saver time-out saver application as an ordinary FM radio. FM ordinary an as application the use to point access an need do not You connection. point Access select service, visual offers that station saved a select you when automatically service Auto-start started. is application the Start-up tone To listen to a saved station, select select to astation, saved To listen Visual Radio service, select select Radio service, Visual Listen To change station details, select select details, station change To service visual . To view available visual content for a stationwith Options Options —To select the access point used for the data data for the used point access the —To select . —To select whether a tone isplayed when > > . Display settings Display Settings —To have —To have the Visual Radio start service Yes . and from the following: the from and Options Options Options > Options > Lighting > Station Stations > Station > or Station > . Power Start > Edit > . or .rm. However, However, .rm. or RealPlayer inserted). (if card memory compatible or a memory device the in it store pages, or web browse you when link a streaming activate can You the air. over media files clips or stream video you play can standards and, therefore, is not supported by this device. device. by this supported not is therefore, and, standards 3GPP with compliant not is that content include may files RealPlayer example, For formats. file of variations the all or formats file 1 Play video clips , select and Press e Gley,p 29. "Gallery",See p. compatible memory card (if inserted), select select inserted), (if card memory compatible To play a filemedia stored in device or memory on a Saved clip played in Most recent clips Open e Ve ei ie" .86. p. files", media "View See LAN. wireless through PC, a or TV a as such devices, UPnP compatible with other device in links your Tip! and and the following: from supports files with extensions such as .3gp, .mp4, attempts to open all .mp4 files, but some .mp4 .mp4 files, some open but to all .mp4 attempts RealPlayer You can also view video clips or streaming streaming or clips video view also can You RealPlayer —to play a file saved in saved file a play —to RealPlayer My own My —to play one of the last six files files six last of the play one —to does not necessarily support all support necessarily not does > RealPlayer Gallery . With . With RealPlayer Options > , 75 My own 76 My own content. The content is not saved in your device. your in saved not is content The content. your deviceconnects to the site and startsloading the streaming, begins content live Before message. multimedia in saved link streaming a select air, the over content To stream However, is until hold and press sound, the mute To . • hold and press file, media the through rewind To . • hold and press forward, fast To • as follows: are play during Shortcuts In provid service your Contact device. your start first you when configured be may points access The use access a WAP point. to you allow providers service Other point. access default your for IAP an use to you require providers service Many the air over Stream content 2 Gallery RealPlayer o e . until see you and press To on the sound, hold displayed. turn Scroll to a file, and press to play the file. play the to press and a file, to Scroll press . Press again to change back to normal normal to back change to again Press . mode. screen press Tip! , on a page, web or in a received ortext message RealPlayer To view a video clip in full screen mode, aclip in To screen video view full , you can only open an rtsp:// URL address.URL rtsp:// an open only can you , recognizes an http link to a .ram file. .ram to a link http an recognizes er for more information. information. more for er • sett. Netw. pages that or browser sound clips. contain video to provide them security additional or up speed to access use providers service Some users. their and servers media Glossary server. proxy number port Proxy Proxy serv. address Use proxy Use sett. Proxy the correctsettings. used when connecting.Contact your service provider for range port the set and point, access default the change Connection playing. finish they after p. 46. For more information, contact your service provider. service your contact information, more For 46. p. settings", "Data See provider. and the service from message Select Select the Change settingsRealPlayer may receive You RealPlayer settings Receive Video att s ocnett h nent n rs . press and internet, the to connect to use to want point access Default —to have Options : Proxy servers are intermediate servers between between servers intermediate are servers Proxy : —To use a proxy server, select select server, a proxy use —To : : —to select whether to use a proxy server, server, proxy a use to whether select —to RealPlayer > RealPlayer Settings —Enter the IP address of the proxy server.the proxy ofthe IP address —Enter —Enter the port number of the of number port the —Enter —Scroll to the access point you you point access the to —Scroll automatically repeat video clips clips video repeat automatically and from the following: the from and settings in a special text text in a special settings Yes . Press , , Press and Organize flash files select devices. mobile for made files flash with interact and play, view, can you Player, Flash With • To copy a flashTo copy filetoanother folder, select . press and it, to scroll device, compatible a to file flash a send To . To open a folder or play a flash file, scroll to it, and press Move to folder to Move select folder, another to file flash a move To to folder Copy bandwidth values for different networks. different for values bandwidth Select Select • • Online time through a network link. Select Select link. network a through clip playing a media pause you when network the from the server’s port range. The maximum value is 65535. is value maximum The range. port server’s the port UDP Highest is value 1024. minimum The port range. server’s port UDP Lowest . Enter thetime, andselect Options Flash Player Flash . > —Set the time for for time the —Set . Advanced settings My own My —Enter the lowest port number of the of the number port lowest the —Enter —Enter the highest port number of of number port highest the —Enter > Flash Player RealPlayer User defined User OK to edit the . to disconnect to disconnect Organize . Organize and press and press > > to thenormal screen, select Full screen The available options may vary. may options available The when you have zoomedin. on mode Pan it. zooming to screen Fit the display. key below either press you when available be still may functions key the screen, full in visible not Press ,Press and Play flash files select Normal Organize select files, flash your organize to folder a create To Select Select . press and file, flash appears uneven and slow, change the change and slow, uneven appears Quality or right. left scroll volume the Volume Stop Pause odlt ls ie colt t n rs . press and it, to scroll file, flash a delete To vary. may options available The —Stop the playback. the —Stop —Pause theplayback. Options —Adjust the playback volume. To increase or decrease —Select the playback quality.If the playback the quality.If playback the —Select or > Low —Play the file using the entire display. To return return To display. entire the using file the —Play New folder New —Move around the display with the scroll key key the display with the scroll around —Move after size original its in file the —Play and from the following: the and from . My own . Normal screen Normal > Flash Player Flash Quality . Even though though . Even . Scroll to a setting to to setting 77 My own 78 My own You can also select select also can You muvee, or or muvee, music, and and music, text. and create custom a muveeto which you can addimages, Gallery, Gallery, displayed. You can select select can You displayed. The muvee is created automatically and a a and automatically is created muvee The 1 muvees Create , Press and select are used in the muvee. muvee. the in used are that text and music, graphics, effects, visual transitions, the determines style The text. and music, videos, images, contain can that clips video styled are Muvees gallery. the 3 2 select select images with which you want to create a muvee, and select select images with which you want to create a muvee, and the In video Select Select style. chosen director list. style the from muvee the for style a Select Recreate folder in in folder Options Options Movie director Movie director Create muvee Back uses the music and text associated with the the with associated text and music the uses to select a different style for your muvee. muvee. your for style different a select to to shuffle to mediathe files and create new a Customize > > Gallery Create muvee Edit My own My . main view, select the videos and and videos the select view, main Save > . Select the video clips and and clips video the Select . Create muvee Create to change the muveethe change to settings > to save themuvee in the Movie ; or open the or open ; , or launch ,it or launch from Preview . Images & view is is view Movie 2 1 Create a custom muvee Options select aand muvee, you want to create which with video style view, select select view, style the In list. style the from muvee the for style a Select User defined User Length • • select select images with which you want to create a muvee, and the In • Videos & Images following: to match the muvee duration. muvee the match to is repeated music the duration, music the than longer is duration muvee If the duration. music the match to is repeated muvee the duration, music the than music or exclude inthe muvee. Select contents muvee. custom the in images Move images. and clips video new capture to application or Add/Remove Add/Remove folder folder in , or Options Movie director —to define the duration of the muvee, select select muvee, the of duration the define —to —Reorder the position of video clips and clips video of position the —Reorder > Auto-select Edit . Select . Select > Gallery —Add or remove video clips and images and images video clips or remove —Add > Create muvee Create —select from the following: the from —select Options Create muvee Create > —Select video segments to include to videoinclude segments —Select Capture Multimedia message main view, select the videos and and videos the select view, main . If the muvee duration is less less is duration muvee the If . . Select the videos and images images and videos the Select . > Customize to open the camera ; or select the the select ; or . and from the from and , Same as Same as Images & • • • following: the from Select Settings message Closing Message Music h muvees. the Default muvee name Resolution use in Memory —to select a music clip from the list. the from clip music a select —to —to change the settings for muvee production. production. for muvee settings the change —to —to edit the —Select the resolution of your muvees. of your resolution the —Select . —Select where to store your muvees. your store to where —Select Opening message —Seta default name for and and on how to play the game, select select the game, play to how on Press , and select , select and Press Games You can select The muvee is created automatically and and automatically is created muvee The 3 muvee, or muvee, Recreate Select toshuffle the media filesand create new a Create muvee Create Customize Save to save the muvee in the gallery, gallery, the in muvee the save to My own to return to the muvee settings. . and a game. For instructions For instructions a and game. Options Preview > Help displayed. displayed. . 79 My own 80 Connectivity guide for Nokia PC Suite. PC Nokia for guide user in the found be can instructions installation Detailed technology. wireless Infrared, Bluetooth serial cable, or USB or compatible a PC by using a and your compatible device connect You can Use your devicemodem as a to connect to network • Transfer information PC Nokia Suite between applications • following: the do to PC compatible to a device your to connect You need PC connections services such as the internet. images. or transfer appointments calendar synchronize to example, For device. your and available in Nokia PC Suite. PC in Nokia available wizard Connected Get the use Suite, PC Nokia use to PC and compatible a to device your connect to Tip! When using Nokia PC Suite for the first time, time, the first for PC Suite Nokia using When Connectivity such as walls or from other electronic devices. electronic other from or as walls such connection may be subject to interference from obstructions the but other, of feet) each (33 10 meters to be within need only devices two The line-of-sight. direct in be to need do not device and the other device your radio waves, using communicate technology Bluetooth with devices Since images with with images print to printer compatible a to connect and files); transfer to example, PC (for your compatible to wirelessly connect clips, and notes; and sound music video images, clips, send to connectivity Bluetooth use can You kits. car and headsets as include mobilephones, computers,and enhancements such may devices Compatible technology. Bluetooth wireless You can connect wirelessly to other compatible devices with , Press and select player cable is connected, select select connected, is cable the deviceask the purposeof the connection each time the , PC Suite Bluetooth connectivity Bluetooth Image print Image Data cable , Mass storage Connect. . See "Image print", p. 39. p. print", "Image See . Ask on connection > , or Data cbl. Image print Image .> . Media . To have . To have on locking the device. the locking on information more for 104 p. "Security", See connectivity. Bluetooth use you cannot device is locked, the When life. battery the reduce and battery power on the demand features, increase other using while background the in run to features such or allowing technology, Bluetooth using Features provider. service or authorities local your with Check locations. some in technology may beThere restrictions Bluetooth on using this with device. compatibility their determine to devices other of the manufacturers with Check model. this for enhancements approved Nokia use technology, Bluetooth supporting devices other between interoperability ensure To Profile. Device Interface Human Transfer Profile, Basic Imaging Profile, SIM Access Profile, and File Profile, Push Object Profile, Exchange Object Generic Profile, Hands-Free Profile, Headset Profile, Networking Dial-up Profile, Port Serial Profile, Access Generic profiles: Profile, Basic the following Printing supporting 2.0 Specification Bluetooth with is compliant device This be compatible, they must support the same profiles. same the support must they compatible, be the hands-free device and the phone. For devices to For example, theHands-Free Profileis used between connect. devices different how defines and function Glossary: A profile corresponds to a service or a or a service to corresponds A profile a and set 16-digit thepasscode other device as authorized. When pairing, use the pairing initiated the other device. from and paired be must devices two activated, the be can mode the Before device. your with mode SIM remote the of use enhancement, set Bluetooth connectivity on and enable the kit car compatible a with mode SIM remote the use To Remote SIM mode select and , Press Settings Bluetooth following: the from Select technology. Bluetooth using devices with users other by seen be can name this and device on and change connectivity Bluetooth you set After your device. for name the application for the first time, you are asked to define a your device to connect to the network, select select network, the to connect to device your in card SIM the use to enhancement, kit car compatible mode SIM Remote name phone's My all select technology, Bluetooth with devices other My phone's visibility phone's My On connectivity Bluetooth set first device, compatible another . To hide it other devices, select from , thenestablish a connection. —Select My phone's visibility —Edit the name of your device. your of name the —Edit On —To enable—To anotherdevice, as such a Connect. —To allow your device to be found by be found to device your allow —To or Off . To connect wirelessly to wirelessly . To connect > Bluetooth to to Shown all to Hidden . When you open open you . When On . Shown to . , your your , 81 Connectivity 82 Connectivity device from harmful content. harmful from device your protect better can you way, this In device. unknown an from requests connection or accept with pair not Do it. to connect and technology wireless Bluetooth with your device find can who control better can you way, Bluetooth When you are not using Bluetooth connectivity, select Security tips select and , rem. SIM mode press mode, SIM the remote exit To the remote SIM mode. However, a wireless connection LAN remains active during card services features or requiring cellularcoverage. network in the signal strength indicator and area, you cannot use SIM is off, by to turned as indicated network wireless the SIM Remote SIM When mode the remote is on in Nokia device, your device. other the from mode SIM remote the Activate 83. p. "PairSee devices", If the device has been locked, enter the lock code. make calls, you must firstthe exit remoteSIMmode. To coverage. network require that features other use or numbers, emergency certain to calls make except device, your with calls any or receive make Warning: > is displayed in the standby mode. The connection Off . or In the remote SIM mode, you cannot cannot you mode, SIM remote the In My phone's visibility My phone's > Hidden . In this. In Exit 2 • When is shown continuously, data is being is data continuously, is shown 1 When connect to trying is device your is blinking, • When • • When is shown in the standby mode, Bluetooth Bluetooth mode, standby the in is shown When • indicators connectivity Bluetooth transfer files to another compatible device at the same time. you can also to a headset, connected if you are example, can be active at a time. connections For Bluetooth Several Send data 4 3 Select the item and and the item Select compatible device, open open device, compatible stored.is For example, to send antoanother image send to want you item the where application the Open connectivity. Bluetooth using transmitted another device. with is on. connectivity Device icons are: computer, phone, audio or audio select search, the device. other interrupt To phone, computer, and device, video are: icons Device to appear on the display. start range within technology Bluetooth with Devices asoe e Pi eie" .83. p. devices", "Pair See a passcode. transmitted, a tonesounds and you are asked to enter be can data before pairing requires device other theIf connect. to want you which with device the Select Options Gallery > Stop Send . . > Via Bluetooth Via . device, and select from the following options: following the from select and device, To set a deviceas authorized or unauthorized, scroll to a search. device the in by indicated are devices Paired view. devices paired the to is saved device the pairing, After as well. device other the on entered be must passcode same The passcode. the and enter the device Select the display. to on start appear range within technology Bluetooth wireless with Devices To open the paired devices view ( ), in the ), in the ( view the paired To open devices Pair devices The 5 To pair with a device, To pair a device, with select once. only used is passcode The passcode. factory-set a have interface user a have do not that Devices code. same to the use other device of the the owner agree with and digits) (1—16 passcode own your create pairing, Before . press view, main application using Bluetooth connectivity. Bluetooth using data established, been has connection the When Sent code find the unique address ofyour device,To enter the address). (device address unique the only show Tip! is shown. folder in folder When searching for devices, some devices may may devices some for devices, searching When *#2820# Messag. in the standby in the mode. standby does not store messages sent messages store not does Options > New paired device paired New Bluetooth Sending .

Delete all Delete To cancel a pairing, scroll to the device, and select time. every separately accepted be must as unauthorized Set view. devices paired indicates the in devices authorized trust. you to someone belong that or devices PC, or headset compatible your as your such devices, own acceptance or authorization is needed. Use this status for this device can be made without your knowledge. No separate authorized as Set To switch off Bluetooth connectivity, select Switch off is item and the shown is the in placed accept, you If message. tone soundsand you are asked if you wanttoaccept the a connectivity, Bluetooth through data receive you When data Receive See "Inbox—receive messages", p. 46. p. messages", "Inbox—receive . See by indicated are connectivity Bluetooth through . If you want to cancel all pairings, select select all pairings, cancel to you want . If immediately and the connection is switched off. switched is connection the and immediately delete pairing the that with device,pairing isremoved Tip! . If you are currently connected to a device and and a device to connected currently If you are Inbox —Connections between your device and folder in folder —Connection requests from this device Messag. . Messages received Bluetooth Options Options > Off > > . 83 Connectivity 84 Connectivity and must be started again. be and must activation of theinfrared port, the connection is cancelled Ifdata transfer is not started within1 minute after the 2 1 infrared using data receive and Send product. laser 1 Class a is device This devices. IR other with interfere to it allow Do not thepoint infrared (IR) beam at eye anyone's or calendar notes, media filesand a with device. compatible With infrared, you can transfer data such business as cards, 3 receive data through infrared, press , and select select and , Connect. press infrared, through data receive to device of your port infrared the To activate port. the infrared activates device user the receiving The of feet). (3 meter 1 to is up devices two the between distance preferable devices. The the between obstructions devices are pointingthere and no each other at that sendingand receiving the infraredports of Ensure that an application or the file manager, and select select and file manager, the or application an file in desired the locate infrared, through data send To infrared function to startthedata transfer. the desired selects device the sending of user The Send > Via infrared Infrared connection > Infrared . . Options > using its infrared port. infrared its using is shown continuously, the infrared connection data receive and to send is ready device your and is active When to the to connect is trying your device blinks, lost. been has a connection or device other When . by in folder All items received through infrared are placed in the in the placed are infrared through received items All point device and encryption enabled. encryption and device point access LAN wireless a with network infrastructure LAN LAN connection. Use the home network featurein a wireless The home network uses the security settings of the wireless network. home same the to connected be to and and setup the other target home devices be UPnP to enabled connection home LAN wireless a working requires network Using the wireless LAN function of the N93 Nokia in a home receiver. multimedia wireless compatible a with equipped or or TV TV, system or a a sound system sound compatible Nokia device, a compatible PC, a compatible printer, and a your as such network, the to LAN wireless support that UPnP devices compatible connect and network home a create can you router, LAN wireless a or device point access LAN wireless a Using UPnP. with is compatible device Your Messaging Home network Home . New infrared messages are indicated are indicated messages . infrared New Inbox

in the the in devices other for search or device Nokia your on files media Gallery in or device, another from request a connection accept Yourdevice isconnected to the home network only if you manage the settings for compatible UPnP devices usingthe home network.To access point in your Nokia device, see "Access points", p. 101. points", access pointdevice,in your Nokia see "Access internet LAN the wireless of the settings or change view To devices. the from separate place a safe in and secret any passcodes Keep devices. the of documentation the Refer to network. home your to to connect you intend devices other on the then device, point access your on first method, an encryption enable network, home LAN wireless your configure you When Important security information Gallery from files media compatible print or copy, play, view, to Connect. in saved files media share can You Home net. Home , , toselect the option view, play, print, or copy e Ve ei ie" .86. files", p. media . See "View Important: of unauthorized access to your data. your to access of unauthorized and the connection reduce risk yourLAN wireless of security the increase to methods encryption > Home net. folder. Always use one of the available available the of one use Always You can also use the home network network home the also use You can Home net. Gallery , press , and select select and , , press with other other with encryption methods in methods encryption the of one enable device, a compatible with network a home create to mode operating ad hoc the use you If Home net. configureyour wirelessLAN home IAP; then configure and create you must LAN, a wireless through devices UPnP hrn etns e Hm ewr etns,p 85. p. settings", network "Home see settings, sharing To change files. private media any share do not or devices, other N93 with off files switch sharing Nokia encryption, If you use wireless LAN in a network thatdoes not have device. unknown an from requests to it andthe home network.not Do acceptconnection Your device notifies you if anot network. ad hoc the joining party an unwanted of risk the reduces step This point. access internet the configure To share media files saved in in saved files media share To Home network settings device. your with supplied DVD-ROM the from software Server Media Home the install must you PC, the on network, home the to PC compatible a connect To Run wizard select view, main network home the in later, wizard for settings your device. To network the setup use home the define to you and helps opens wizard setup the time, you accessWhen the home network application for the first UPnP wizard . See "Wireless LAN", p. p. 17. LAN", "Wireless See . and follow the instructions on the display. the on instructions the follow and WLAN security mode security WLAN Gallery her device attempts to connect her device attempts with other compatible other compatible with when you you when Options > 85 Connectivity 86 Connectivity you use home internet access point that is used automatically when connect to the home network, you time every point access home the for ask to device Select content define and on sharing Set network. in home devices the compatible to the other Device name points","Access p. 101. in LAN Wireless See security. LAN wireless the on switch first and point access the defining cancel or later; security LAN wireless the on switch and continue can You warning. a security enabled, you get settings have LAN security wireless compatible devices. compatible sharing Content To configure To configure Configure settings for the settings before Home access point access Home Settings The options related to Connect. Home net. Home and from the following: and the following: from Home net. — Enter a name for your device that is shown is shown that device your for name a Enter — > —Allow or files sharing —Allow media deny with , or Home net. —Select Home net. None Home net. , select , select . If your home network does not Always ask Always > User defined are not available in Connect. Share content have been configured. been have if you want the the want if you > to select your your to select Home net. . Gallery >

Images & video the from devices other with sharing for files media select To status of such as a compatible TV, do the following: do the TV, compatible a as such in network device, and show home them another device in your clips stored and videos, sound images, select To Media files stored in your device in share to selected have you files media the compatibledevices in thehome network can viewand copy If with your Nokia device. supplied DVD-ROM the from software related the install connectTo a compatible to PC the network, home you must media files View set files, your access to devices other the want not do you If the other device. other the by is allowed it if device network home another in stored files media the copy and view still can you device, your Content sharing Content Content sharing Important: set set you If settings. other the all configured have you Images & video & Images in the for sharing selected you have your files copy and view can network home the in devices Images & video Content sharing Content and is on in your device, the other UPnP UPnP other the device, your in is on Do not set off. Even if Even off. Music and and or folders or view to the sharing on, the other UPnP compatible compatible UPnP other the on, Music Music Content sharing Content Content sharing Content , select , select folders. Share content Share Share content Share on before on before is off in off is . . 4 3 2 1 do the following: device and show them in your device (or ina compatible TV), selectTo media filesthatare stored on anothernetwork home Media files stored in the other device 1 2 3 have to be switched on. switched be to have Gallery in option print the select printer, compatible UPnP a in saved images print To To stop sharing the media file, select select file, media the sharing stop To 5 view, and select and view, select to want clip you or music clip, video image, the Select device. other the of features other device. The available file on types depend the the from view to want you media type of the Select list. the from device a Select toappear on the display. start names Device devices. compatible other of search (images and video) or or and video) (images In In Select sound clips are played only in the other device. other the in only played are clips sound clips and video The device. your and device network home other the in both shown are images The shown. file is the media in which device a Select compatible Select the device in which the file is shown. is file the which in device the Select Gallery Gallery . See "Image print", p. 39. 39. p. print", "Image See . Options , select an image, a video clip, or a sound clip. sound a or clip, video a image, an select , , select , select > Options Home net. Show via home net. Gallery Play via home network home via Play > Show via home net. . Your device starts the the starts device Your . Content sharing Content through through Options Home net. > Stop showing does not does not (music).

with with . network phone mem. phone and device other in the file a select Tocopyor transfer files from the other device to yourdevice, on. be switched to have not Content sharing available). is card memory compatible a if card memory Press , , Press and select in file a select PC, compatible UPnP a as such device, compatible another to device your from files media transfer or To copy files Copy media To search files with different criteria, select To sort the found files, select select files, found the sort To want to synchronize your device data. your device to synchronize want you which with the application of supplier the contact compatibility, on SyncML For information synchronization. The synchronization applicationusesSyncML technologyfor settings. synchronization edit or create also can You internet. the on or computer compatible a on book applications and address calendar compatible various with or e-mail contacts, calendar, notes, your synchronize Gallery or or Move to Move home network Synchronization or and and Copy to memory card does not have to be switched on. switched be to have not does Options Connect. > Options Organize > Sync . Options Content sharing Content . > Sync (thenamethe of > Sort by Copy to home Options enables you to > Copy to . > does does Find . 87 Connectivity 88 Connectivity Press , and select select , and Press 1 profiles. synchronization In the Synchronize data message."Data Seesettings", and 46. p. text a special in settings synchronization receive You may 2 Availab. WLAN Availab. select range, within available LANs wireless for To search select LAN, wireless and network UMTS GSM and in end connections or status of data connections Select a synchronization profile and profile and a synchronization Select To cancel synchronizationit beforefinishes, select display. the on shown Synchronize or on the server. device in your deleted, synchronized) or (not discarded status and how many entries have been added, updated, Select complete. is synchronization the when notified are You Sync Yes Connection manager Connection main view, you can see the different different the see can you view, main to view the log file showing the synchronization synchronization the showing file log the view to . . The status of the synchronization is synchronization of the .status The Connect. > Conn. mgr. Options Act. data conn. data Act. . To view the > Cancel . . all open connections, select select connections, open all To view the details of a connection, select select connection, a of details the view To To view the details of a network, select of thea details select To view network, has device your if shown is an active connection in the network. encryption. with networks Ad-hoc LANs within ( their network range, within mode LANs of wireless list a shows view LAN wireless available The LAN Wireless select a connection, end To ). ( connections LAN and wireless ), or ), ( calls data connections: data open the see can you view, connections active the In connections Data 1 point access an internet Create The details shown depend on the connection type. the connection on depend shown details The 2 Press , and select select and , Press access point, and select internet an create want to which you in the network to Thesearches device wireless for within LANs range. Scroll WLAN Availab. ,adsga teghidctr for is shown indicator. ), strength signal and features, rounding off for billing, and so forth. and billing, for off rounding features, network on vary, depending may provider service Note: The actual time invoiced for calls by your your by calls for invoiced time actual The . Connect. Options Options Options aktdt oncin ( data connections packet > > > Define accessDefine point Conn. mgr. > Disconnect Disconnect all Options Options Infrastructure > > . To close > Details Details . or or . . . configuration server. Server ID Server name settings. correct the for provider service your Contact profile settings Server , Press and select 3 for your device, scroll to a profile, and select select and profile, a to scroll device, your for settings configuration receive and server a to connect To device. your in applications by different used settings other and connections data for settings point access include may management department. These configuration settings information company or provider service your from settings configuration different and profiles server receive service providers, select select providers, service from settings configuration of receiving deny or allow To Start configuration Disable config. Disable points", p. 101. points", "Access see settings, these change or view To settings. default with point access internet an creates device The —Enter the unique ID to identify the Device manager —Enteraname for the configuration server. . . Connect. Options > > Dev. mgr. Enable config. Enable . You may Options or > Server password Server from the server, select select server, the from configuration Allow and password. server, select select server, the from a configuration accepting before confirmation reqs. all Auto-accept User name User Port address Host connecting to the server. point Access server. the to connect mode Session to theserver. password Server Press , , Press and Modem select Ifae oncin,p 84 . p. see connection", devices, the "Infrared connect to how For . press modem, a as it use to infrared, PC through compatible a to device —Enter the port number of the server. the of number port the —Enter and —Select an access point to be used when when be used to point access an —Select —Enter the URL address of the server. the of address URL the —Enter No —Select the connection type that is used to to is used that type connection the —Select Password . —Select if network authentication is used. —Enter a password to identify your device device your identify to a password —Enter Connect. —To receive configuration settings settings configuration receive —To —If you want your device to ask for for to ask device your want —If you Yes —Enter your user name . > Modem . To connect your your connect . To 89 Connectivity 90 Office 3 2 1 occur. may Converter , select and to one unit another, from press Tomeasures convert , and select press voice memos, To record during recording. seconds 5 every tone a hear parties Both call. voice a during Recorder In the first first the In which you wanttoconvert. next the In convert. to to show the converted value. converted the show to other The convert. first In In the the In . To record a telephone conversation, open. To record a Recorder Office Type has limited accuracy and rounding errors errors rounding and accuracy limited has Unit Office Converter Amount field, select the measure you want to use. field, select the unit from which you want want you which from unit the select field, > Converter Amount field, enter the value you want to to want you value the enter field, Unit field changes automatically automatically changes field . field, select the unitto Office Recorder >

base currency is always 1. always is currency base a base currency and add rates.exchange The rate of the select must you conversions, currency make can you Before (.txt format) that you receive to to receive you that format) (.txt , and select files text plain save and devices compatible to notes send press notes, To write , and select and percentages, press To add, subtract, multiply, divide, and calculate square roots Select and exchange rates Base currency Type exchange rates are cleared. set previously all because rates new the enter Note: designed for simple calculations. simple for designed Note: Notes Calculator > When you change base currency, you must must you currency, base change you When This calculator has limited accuracy and is is and accuracy limited has calculator This Currency > Options Notes Office > Office Currency rates . > Notes > Calculator . You can can . You . . memory card. aor compatible on on the device files can store archive You Zip managersettings—Change the following settings: • the archive change or clear, password—Set, Archive • an from or files directories files—Delete Delete • compressed multiple or single archive—Add an Update • Create new archive—Create a new archive file to store • manager: Zip using tasks following the perform can You and select , press Zip manager, To open to e-mail. convenient more are and memory less use files Compressed files. compress to application Zip manager the Use manager Zip Options select 8150), HP Photosmart or Printer Mobile 450 Deskjet as HP (such connectivity Bluetooth with printer equipped profile (BPP) print basic a compatible on a note To print Compression level archives. protected for password archive. existing archive. existing an to directories or files compressed ZIP formatted files > Print . and and Include subfolders Office . > Zip . e lo"oeifrain,p 93. p. information", also "More See supported. are formats file the mentioned offeatures format in Microsoft Word 97 or later. Not all variations or Quickword and underline. italics, bold, colors, supports device. of your display the on documents You can also select select text, for document the To search key. scroll the use document, the in To move View Word documents With Quickword select and , Office press applications, Quickoffice the use To to reach the desired view. . To sort select files, press application, its respective file in open a To opens. device your in saved formats file .txt and To open To open Quickword > Quickword Quickoffice supports the viewing of documents saved in .doc .doc in saved documents of viewing the supports Options Quickoffice , you can viewnative Microsoft Word , Options > Quicksheet . A list of files in the .doc, .xls, .ppt, .ppt, .xls, .doc, the in files of list . A Sort by and from the following: the from and . , or , or Quickpoint Options Quickword rs press , > Find

. 91 Office 92 Office To switch between worksheets, select worksheets, between To switch key. scroll the use spreadsheet, in the around To move View spreadsheets 93. See p. information", also "More are supported. formats file the mentioned or of features or all Not variations 97 Excel later. in Microsoft in .xls format Quicksheet device. your of display on the files Excel Microsoft read can you Quicksheet, With Quicksheet . press scrolling, stop To document. the auto-scroll Start Zoom document the within Go to To display the columns and rows, select a block and block and a select rows, and the columns display To displayed by a screen. and rows columns A block contains Pan the following: from and select is displayed, spreadsheet the how change To select formula, or value a within text a for speadsheet the To search —to navigate within the current worksheet by blocks. by blocks. worksheet current the within navigate —to —to zoom in or out in zoom —to —to move to the start, end, or selected position position or selected end,start, the to move —to Options supports the viewing of spreadsheet files saved saved files spreadsheet of viewing the supports > Find —to start automatic scrolling through through scrolling automatic start —to . Options > Worksheet Options OK .

. view, select outline the in outline presentation the in items expand To Full screen select in full screen, presentation view the To press moveTo to the next or previousor slide . in the presentation, press view, notes the and outline, slide, the between move To or . View presentations 93. also See p. information", "More supported. are formats file mentioned the of features or variations all Not or later. 97 PowerPoint Microsoft in format .ppt in created Quickpoint device. your of display the on presentations With Quickpoint Resize spreadsheet the in move you while visible panes Freeze Zoom Quickpoint —to zoom in or—to out —to adjust the size of columns or rows or columns of size the adjust —to . supports the viewing ofthe presentations viewing supports Options —to keep the highlighted row, column, or both both or column, row, highlighted the keep —to , you can view Microsoft PowerPoint PowerPoint Microsoft can view you , > Expand . Options > • Send a document using Bluetooth connectivity to your to your connectivity Bluetooth using document a Send • e-mail received from attachment e-mail an Open • to [email protected]. to e-mail an by sending available is also Support information. •Use •Pressdocuments: and open To access only a limited set of features compared with PC versions. provides and devices, mobile other and handsets on content , document PDF for optimized been has application This and device. your of display on the documents PDF read can Reader you Adobe With select or with problems experience you If information More Quickpoint Inbox service). (network messages card. memory compatible a on and memory device in the stored Options the device memory and on the memory card. memory the on and memory the device File mgr.

in > Adobe reader Adobe Messag. Browsefile for , visit , visit to browse and open documents stored stored in and open browse documents to www.quickoffice.com . Office to browseand open documents > Quickword Adobe PDF Adobe for more more for , Quicksheet . Select . Select , page, first page, or last page. last page,page, or first Go to direction. either in degrees 90 by document PDF the rotate View Find PDF whole page to the screen. the or fit width, screen to the document the resize also can Zoom following: the an with up set is device your Ensure pages. web Browse • When a PDF file is open, select select open, is file PDF a When PDF View files select and , Office press files, PDF manage and To browse Manage PDF files of PDF of PDF documents. Settings card. memory compatible a on or memory for file Browse You can also select . and press it, to scroll document, a To open view. your device. your for guide user the see points, access on information more For browsing. before point access internet —tosearch the document for a text. —to view the document in full screen. You can also You can also in full screen. document the —to view —to to —to a page,move next page, selected previous —to zoom in, —to out, or to a percentage. You selected > —to —to default zoom level mode modify and viewing Adobe PDF Adobe —to browse for PDF files in the device device the in files PDF for browse —to . Options Your recent files are listed in the file the in listed are files recent Your and from the following: from and Options

and one and one of 93 Office 94 Office Use the the Use and/or service provider. retailer by country, vary may reader barcode of Availability visit information, more For More information Details mode. viewing Settings card. memory Save forum at at forum application, visit the Adobe forReader Symbian OS user about the and information suggestions, To questions, share To scan and decode barcodes, press , and select select , and Office press barcodes, and decode scan To numbers. phone and addresses, e-mail links, URL as such information contain may codes The magazines). in codes and barcodes example, (forcodes code, and the decoded information appears on display. the on appears information decoded the and code, The display. the on lines red To scan a code, select —to save the file to device memory or a compatible or compatible a to device the memory save file —to —to display the properties of the PDF document. PDF of the properties the display —to > Barcode —to modify default zoom level and default default and level zoom default modify —to Barcode reader Barcode http://adobe.com/support/forums/main.html to application decode types different of . Scan code Barcode www.adobe.com . Set the code between the the between code . the Set scans and decodesthe . . power if if power The goes the device into standby tomode save battery link. highlighted the on depending vary may options available The Call to URL address or Add toContacts address e-mail or an number phone message Create in bookmarks to Add Open link Scan new code Select information. decoded the in appear they the direction of in the display on the top by icons indicated are addresses e-mail and numbers, phone links, URL links, the different information, decoded the viewing When select view, main the in information, decoded saved view To format. .bcr in saved is data, select scanned the save To ae nomto,pes . saved information,press or viewing scanning To continue for 1 minute. pressed Web —to —to call a phone number. Saved data Saved Saved data Saved Barcode —to a—to open URL link —to scan a new code a new scan —to —to send a text message or an e-mail to a a to e-mail an or message text a send —to —to add a phone number, e-mail e-mail address, add anumber, —to phone cannot be activated or if no keys are are keys no if or activated be cannot ooe oe rs . press a code, To open . Contacts > —to save a URL link to the bookmarks bookmarks the to a URL link save —to Options and and the following: from Options > Save . The data. The • To change the shortcuts the shortcuts change To • ringing the customize To • the standby change To • most your to access fast for display standby the use To • information. more for provider service your Contact icons. and order, menu names, menu in changes include may configuration This provider. service your for configured specially been have also may device Your menu. device on your appear will not they so, If device. your in activated not or disabled be features service may haveprovider requested thatYour certain Personalize your device assigned to , and in the standby mode, mode, standby the in and 99. mode", "Standby p. , see to assigned 66. p. contacts", for tones ringing "Add and 95 p. tones", "Profiles—set see tones, 96. p. device", your of the look "Change see saver, screen in the shown is or what image background mode 97. p. frequently mode", used applications, standby see "Active • To change the clock shown in the standby mode, mode, standby the in shown clock the change To • or caller groups, press , and select select and , press groups, caller or environments, events, different for tones other and tones, alert message tones, ringing the customize and set To Scroll to the profile, and select select and profile, the to Scroll select , and press a profile, To modify mode. standby the in Scroll to the profileyouwant to activate,and select press profile, the To change • To change the welcome note to an image or animation, animation, or image an to note the welcome change To • Tochange the main menu view, in the main menu, • • To rearrange the main menu, in the main menu, select select menu, main in the menu, main the rearrange To • rs , and selectClock type press General rs , and select press select applications that you use more often into the main menu. main the into often more you use that applications place and folders into applications used less move can Options Options Profiles—set tones Profiles—set > > Welcome note / logo note Welcome Move > Analog > , Change view Move to folder to Move Clock Tools or Digital > > Options Settings Options > . . Grid , or Tools > Tools New folder > or or > Customize > Settings Phone List Profiles > . Profiles > . You > OK . . . . 95 Personalize your device 96 Personalize your device the outbox to be sent later. sent be to outbox the in placed are they messages, send to try you If prevented. indicator strength signal the in are device the from and to signals phone wireless area. All by off, as indicated turned is network wireless the to connection the profile, offline the activate you When network. wireless the to connecting without use device the lets The profile offline you Offline profile tone, a choose you When stop press the sound, any key. . Youcan scrollthrough the tonelist To selection. your make you before one each to listen and indicatedwith to are card memory the on stored Tones choices. the open press and change, to want you setting the to Scroll rings, select device your when said be to name caller’s the want If you to a web page to download tones. connection start and bookmark a select can You bookmarks. On To create a new profile, select select profile, new a create To . The caller’s name must be saved in been locked, enter lock code. locked, the been enter has device the If function. phone the activate to profiles change you must calls, To make coverage. numbers, or use other features that require network emergency certain to calls except calls, any receive Warning: Options In the offline profile you or offline you In profile cannot make the > Customize Tone downloads Options > Say caller's name > Contacts Create new Create a list opens of . . > indicated by . The themes on the memory card are not not are card memory the on themes The . device. in the inserted not is card memory if the available by indicated themes on a compatible memorycard (if inserted)are from the other or elements from themes together images select hm sidctdb . In by is indicated theme and icons, press , and select select and , press icons, and wallpaper as the such the display, of look the change To 81. p. "Settings", See profile. offline the exit you A Bluetooth connection is automatically reactivated after is deactivated. it offline profile, the using before activated is connection a Bluetooth If strength). signal sufficient is there (providing transmissions wireless reenables , selectand device another profile.The To exit the offline profile, press 17. p. LAN", "Wireless See connection. LAN a wireless using and establishing when requirements safety applicable any with comply to Remember internet. the on browse or e-mail use the wireless LAN (if available), for example, to read your still can you profile, offline the activated have you When cause interference or danger. or interference cause may it or when is prohibited use device wireless when on device the switch not Do profile. offline Warning: Gallery ordevice your Change the look of to personalize themes further. The The further. themes personalize to Your device must be switched on to use use to on switched be must device Your Themes Tools > you can group group can you Themes . The active. The standby on or standby off. , Press select mode is on. standby active the default, By applications. used frequently most your to access fast for display standby your Use mode standby Active editTo themes, scrolla theme,select to and Options Apply To activate a theme,scroll to it, and select select To open themes, a browser more connection and download memory first. without the memory card, save the themes in thedevice card memory the in saved themes the use to want you If to change the settings for mode Options select settings, its original to theme the selected restore To . To preview a theme before activating it, select select it, activating before theme a preview To . > Theme downloads Active standby Active > > Preview Restore orig. theme orig. Restore Tools . > , and press to switch the active active the switch to press , and Settings . Wallpaper when you edit a theme. > Phone and and Power saver > Options Options Standby Standby > > Edit .

select select , press applications shortcuts, default the To change on. is mode when the activestandby used be cannot mode standby the in available shortcuts key scroll standard The . press and event, or application an to Scroll below. listed events player calendar, to-do, and top of the screen and the across applications default with shown is display standby active The change them. change to able not are you and be fixed, may shortcuts Some apps. standby Active Tools > Settings n rs . press and , > Phone > Standby mode > 97 Personalize your device 98 Tools change them. change to able not are you and fixed, be may shortcuts Some provider, and you may not be able to change them. change able to be not may and you provider, may be Some settings for the preset by your service device . . you a Scroll to setting press and change, to want select , and group, press a settings To open press settings, To change Left .To change the select , press you when shown are that applications and Tochange the shortcuts, press . press application, an selecting without list the press . aapplications, To listopen of multimedia and hold To open the to assigned the pressshortcut key, multimedia . To open the desired application, use the scroll key. To exit exit To key. scroll the use application, desired the open To . , Middle Settings key Media Tools , and , and Right and the application. the and Tools > Settings Top . , Image useto the default image, Select device. on the switch you each time briefly / logo note Welcome languages. all for available not is dictionary text predictive The in the device. editors all text Predictive textand the predictive text dictionary used. charactersspecial and characters available when writing language Writing settings again. these change you until effective remains change the language Changing the settings for the device restarts. on your SIMcard.Afterchange youthe display text language, Automatic calculations. in example, for used, separators the and time and date for used format the affects also device your in language Phone General to select an image from from image an select to affects every application in your device, and and device, your in application every affects Phone settings selects the language according to the information —Set the predictive text input input text predictive the —Set —Changing the language of the display texts —Changing the language affects the the affects language the —Changing —The welcome note or logo is displayed Text Phone language Phone to write a welcome note, or note, welcome a to write Gallery . or On Writing or or Default Off for

the brightness of the display is automatically adjusted. automatically is display the of brightness the conditions, light in extreme However, or darker. lighter to Brightness Display if available only you want to appear in the active standby. This setting is mode. the standby apps. in ) standby Active ( key mode. the standby in ) Right selection key ( key key selection Left 97. p. mode", standby "Active See mode. standby Active Standby mode filesand are unaffected. Documents on. to power time longer a take may device the resetting, After 104. p. SIM", and "Phone "Security", See code. lock the need you this, do To values. original their to Orig. phone settings not want want not the logo to be shown. and received saved an operator logo. Select Operator logo shortcuts areavailable not if the active standbyon. is key selection The centre key. selection centre of the presses different the for shortcuts keypad assign also can You —Adjust the basic brightness level of the display of the level brightness basic the —Adjust —This setting is only available if you have if you have only is available setting —This —Use shortcuts to applications in the standby standby in the to applications shortcuts —Use Active standby Active —Assign a shortcut to the left selection selection left to the a shortcut —Assign —Assign a shortcut to the right selection —You can reset some of the settings ofsettings the reset can some —You —Select theapplication shortcuts is on. is Off if you do do if you If fold closed fold If Answer if fold opened fold if Answer Select mode. standby the in is device the and cover the Opening tone cover. the tone Closing cover. the close you animation Closing cover display. on the and crop the area of the image you want to be displayed rotate, zoom, can you and display, cover the of size the is tool frame cropping selected. The of theon top image you tool is shown frame the cropping settings, in the wallpaper cover display in the standby mode. If you select you If mode. standby in the display cover Wallpaper off. display of the is switched time-out Light activated. is saver screen the which time-out saver Power Select Select display Cover Calls Customization —Select the background image displayed on the the on displayed image background the —Select and from the following: the and from —Select a short tune to play when you close close you when play to tune a short —Select —Select —Select a short tune to play when you open open you play when tune to a short —Select —Select a time-out after which the backlight backlight the which after time-out a —Select —Select a short animation to play when when play to animation a short —Select and from the following: the from and End call —Select the time-out period after —Select —Select or No Activate loudspeaker Activate or Yes . User defined .

99 Tools 100 Tools last call. the of duration approximate the display briefly to device Summary after call . press redialing, automatic stop To attempt. call unsuccessful maximum of10 attempts to connectthecall afteran Automatic redial Automatic instead of video. displayed be to image still a Select call. video a receive you call video in Image a you reject call. when text Message 60. p. a call", decline or "Answer See call. the answer not could you why informing caller a to SMS with call Reject on or off, select select off, on or select is active, function the whether check To progress. in call a have you while call incoming you of a new notifies network the service), waiting Call service. the network to subscribe you when provider service by your set may be value the Otherwise, calling. you are person the from or hidden seen Send my caller ID Call settings —If you have activated call waiting (network waiting (network call activated you have —If —Write a text to be sent in a text message message text a in sent be to text a —Write Activate —Select —Select —Select —You can deny video sending when when video sending —You can deny —Activate this setting if you want the the you want if setting this —Activate —Select —Select Check status or Yes On Cancel or or , and your device makes a a makes device your and , Yes Set by networkSet No to send a text message message a text send to to set your phone to be be to phone your set to . . To set the function is displayed. 1-touch dialing 1-touch Anykey answer can be ) dialed by pressing and 55. p. dialing", "1-touch also See key. the holding - 1-touch dialing keys ( this setting, you need the PIN2 code. PIN2 the need you setting, this select Line change mode. standby the in shown is selected, 2 is line When calls. make to able be not will Line 2 . select If you line. selected of the irrespective be answered can on lines Calls both text messages. and calls sending making , and for use to want you line phone which Select lines. phone , that is, numbers, two cardsubscriber supports two the SIM , use in Line briefly press any keypad key except data connection. data be active at thesame time, and access points canshare a can connections data multiple networks, UMTS and GSM in device your use you When GSM network. the in GPRS as such connections, data packet supports device Your pointsand access connections Data and have not subscribed to this network service, you you service, to network this subscribed and have not Disable hold in the standby mode. standby the in hold Tip! —This setting (network service) is shown only if only if is shown service) (network setting —This To switch between the phone lines, press and press lines, phone the between To switch Connection —To prevent line selection (network service), service), (network selection line prevent —To if supported by your SIM card. To change To change card. SIM by your supported if —Select —Select —Select On On . To answer an incoming call, , and the numbers assigned to the to assigned the numbers , and LAN access point. access LAN point. access a protected indicates them. remove or edit, create, to be change, able may not and you provider, service your by device your for preset be may points access all or 46. Some See p. provider. "Dataservice settings", and a from in a message settings point access receive may You Access points provider. service your contact services, connection data packet to subscription and availability For access. to want you service the for provider service your with need you point of access type the Check IAP to and the internet receive e-mail send connect to and • or WML view to application web the for point Access • MMS access topoint send and receive • follows: as points access of kinds different define can You is an access required. point a dataTo establish connection, a be active at LAN time. can wireless in one Only one connection 17. p. LAN", "Wireless See connection. data LAN wireless a use also can You XHTML pages messages multimedia indicates a packet data access point and a wireless a wireless and point access data a packet indicates and select select and Tip! WLAN To create an IAP in a wireless LAN, press , , press LAN, IAP in a an wireless To create > Options Connect. > Define access point access Define > Conn. mgr. > Availab. Availab. . connection and is usually provided by the service provider. service by the provided usually is and connection Password select device, in the your password save to want do not you if or a server, to log in you time point Prompt password Prompt provider. service by the provided usually is and connection name User yourprovider. service from name point Access provider. service your from instructions the Follow data Packet it for your SIM card. provider must support this feature and, if necessary, activate service the network connection, a data use to able To be provider. service your by otherwise instructed been have you unless empty, left defined be Must with marked fields all in Fill available. are fields setting certain only select, you connection data the on Depending Data bearer connection. the Connection name Edit To create a new access point, select point, select access a new To create . Follow the instructions from your service provider. service your from instructions the Follow . . To edit the settings of an access point, select —A password may be needed to make a data a data make to needed be may password —A —The user name may be needed to make a data —Select the data connection type. connection data the —Select or with a red asterisk. Other fields can be be fields can asterisk. Other a red with or —If you must enter every enter you must the password —If —Enter a descriptive name for for name descriptive a —Enter —You obtain obtain —You the access name point Options Yes . > New access New access Options > 101 Tools 102 Tools DNS address DNS device. your IP address Phone type. on network depend selected the other settings The type Network settings: following directly; a wireless LAN access point device is not needed. is not device point access LAN wireless a directly; data receive and send to devices allow to and network WLAN netw. name provider. service your from instructions the Follow LAN Wireless number port Proxy address serv. Proxy addresses. these obtain to provider service internet your Contact server. DNS secondary of the address the IP In server. DNS of the primary Select center. messaging multimedia of or the the address address web up,the enter Homepage WLAN netw. mode device. point access of its and netw. Authentication WLAN security mode security WLAN . If you select an existing network, network, existing an select you If . Options —Depending on the access point you are setting are setting point you access on the —Depending —In —Select —Select > —Select —Select Primary name serv.: name Primary (for IPv4 (for the IPv4 only)—Enter ofIP address Advanced settings Advanced —Define the address for the proxy server. proxy the for address the —Define —Select —Enter the —Enter port proxy number. —Select —Select IPv4 settings IPv4 Normal are determined by the settings the settings by determined are Enter manually Ad-hoc Second. name server: or Secure to create an ad hoc hoc ad an create to or or to change the , enter the IP address address IP the enter , WLAN netw. mode netw. WLAN IPv6 settings IPv6 . or Search for for Search , enter , enter .

802.1x select WLAN security mode key key), settings key WEP device. point access LAN the wireless and your device between type authentication for settings Security mode: security sett. security WLAN them. supports network the if only be used can functions WPA and WPA mode Security settings settings for Security Authentication type Authentication device. point access LAN wireless the on entered be must settings same The keys. WEP four to up Wep key in use EAP plug-in settings settings: appropriate Pre-shared key (EAP) or protocol authentication plug-in an extensible use your service provider instructs. provider service your (the WEP key data in the selected format). selected the data in key WEP (the WEP key format Open network for(not ad hoc networks), or —Select the meansofauthentication: —Select the WEP key number. You can create create can You number. key WEP the —Select to ause Complete the password. —Enter —Enter 802.1x , no encryption is used. The WEP, 802.1x, WEP —Enter the settings for the selected selected the for settings the —Enter —Select —Select (only for for (only —Select the encryption used: used: encryption the —Select ( ASCII are as as are follows: WEP encryption WEP and or Open EAP WPA/WPA2 Hexadecimal )—Enter the settings as or WPA/WPA2 Shared (length of the of (length arefollows: as for the ), and EAP . If you you If . WEP WEP to to , Proxy port number Proxy serv. address select manually, (1-11) number Well-known connection (for example, to send and receive e-mail) is quicker. quicker. is e-mail) receive and send to example, (for connection to the packet data network. Starting an active packet data registers the device data, packet supports that a network in Packet data conn. data connection. packet a using points access all affect data settings packet The Packet data settings IPv6 addresses. these for provider service internet your Contact server. DNS secondary and primary the of addresses device), settings IPv4 Select Homepage (TKIP)is used. Protocol TKIP encryption device. point access LAN wireless the on entered be must password same The Pre-shared key Ad-hoc channel gateway Options Subnet mask (the gateway), and —Define a home page. a home —Define , or : > > Phone IP address Phone (only for DNS address DNS —Select whether Temporal Key Integrity Integrity Key Temporal whether —Select Advanced settings Advanced (only for (only User defined User —If you select —Enter the address for the proxy server. —Enter the proxy port number. port proxy the —Enter (the subnet IP address), IP subnet (the Pre-shared key Ad-hoc DNS address —Select . When available User defined User (the IP address of your your of address IP (the )—To enter)—To channel a and from the the following: and from Automatic )—Enter a password. a password. )—Enter —Enter the IP . and you are are you and Default Default , device as a packet data modem to your computer. your to modem data packet a as device point Access it. needs that or an action if you start only application When needed select you If data connection. a packet establish to tries periodically device the data packet coverage, is no there If Gnrl,p 98. p. "General", in settings language and 16 settings", p. "Clock See in them delete or view, device, your to settings these save can You card. USIM your on stored be may settings the or message configuration in a provider service your from settings server trusted receive may You Configurations networks for Scan available. is LAN wireless a Show availability Wireless LAN To view advanced settings, select select settings, advanced To view LANs and updates theindicator. wireless for available searches device the often how select o recommended. not settings . Changingwireless LAN advancedsettings is Date and Date time —The access point name is needed to use your your to use is needed name point access —The , the device uses a packet data connection connection datapacket a uses device the , Slc hte is displayed when —Selectwhether —If you set Show availability Show Options Configs. > . Advanced to to Yes , 103 Tools 104 Tools are recognized as the owner’s cards. owner’s the as recognized are that cards SIM of list a maintains device The device. your into is inserted card SIM unknown an code when lock the changed SIM if Lock your device. programmed into number official emergency the to be possible may calls is locked, device the When code. lock the enter device, the unlock To autolock period, select select period, autolock the off To turn locks. automatically device the which after Autolock period number. emergency the of dialing accidental to prevent numbers emergency the to similar codes access using Avoid 104. p. codes", "Glossary of and lock PIN service provider. contact your See numbers from lock,the PIN, These codes. can only include and PIN2 codes code PIN 104. p. codes", and lock of PIN "Glossary See cards. SIM some by allowed be not may request code PIN the on. Deactivating is switched device the time each PIN code request SIM and Phone of commands opens. Select of commands Tip! , PIN2 code PIN2 To lock the device manually, press . A list list . A press manually, device the lock To Security 0 —You can set an autolock period, a time-out to —When active, active, the code is —When requested 9 , and , and . If you forget any of these codes, codes, of any . If you forget these —Youcan set thedevice to ask for None Lock code . Lock phone Lock —You can change the the change can —You . If you forget the code, contact your service provider. service your contact the code, forget you If device. your from place a safe separate in and secret code new the Keep code. lock the change device, your of use is code lock the for setting factory The use. avoid unauthorized to device the lock to used be can (5 digits) code code)—This (security code Lock cards and is required to access some functions in your device. PIN2 code—Thiscode to (48 digits) issupplied with some SIM phones. mobile by UMTS supported is of card USIM the and The SIM card version is an enhanced card. USIM the with supplied may be code code—This UPIN PUK code to unblock it. the need you and blocked, is code the entries, code PIN incorrect consecutive three After card. SIM with the supplied usually is digits) 8 (4 to code PIN The use. unauthorized against card SIM your protects code code—This PIN service forget these codes, your anyIf you of contact provider. codes lock and PIN of Glossary service). (network confirmationSIMaremessages youa using card service when Confirm SIM services device. your into programmed number emergency official the to possible be may calls groups, user closed to limited are calls When service). you (network call can who and call you can whom group user Closed —You can specify a group of people to to people of a group specify can —You —You can can device the —You set to display 12345 . To avoid unauthorized To avoid . should also be used if you want to reduce the risk of viruses viruses of risk the software. installing and downloading when software of reduce to want you the authenticity of sure be if and software malicious other or used be also should They information. confidential transferring involve that actions server for or site remote bank or another an online to connect to want you if used be should available. if certificates Digital certificates, of personal list a see to Press device. in your stored are that certificates of authority list a see can you view, main management certificate the In software. of origin the verify to Digitalcertificates not do guarantee safety; they are used management Certificate is in your device. USIM card, contact the service provider whose USIM card the with supplied not is code the If code. UPIN blocked a change to required is (8 digits) code UPUK code—This device. in your is card SIM whose operator the contact card, SIM the with supplied not are codes the If respectively. code, PIN2 or code PIN blocked a change codes PUK and PUK2 codes—These contain correct, authentic, or trusted certificates certificates trusted or authentic, correct, contain must manager the by certificate itself; protection any offer not does certificate a of existence The correctlyorderin benefit to from increasedsecurity. installationconsiderably smaller, they mustbe used software and connections in remote risks involved Important: Even if the use of certificates makes the (8 digits) are required(8 digits) to are select select and certificate, a to scroll details, certificate check To device. your in certificate security correct the or if you do have not authentic You are notifiedif the identityofthe serveris not checked. been have certificate a server of validity of period the and signature the when a server identity of correct of the sure be only can You View certificate details—check authenticity correct. are device your in time and date current the that valid yet restricted lifetime. If a have Certificates available. be to security increased for • • • • displayed: be may notes the following of one and is checked, certificate of the validity the details, certificate Contact the certificate issuer. certificate the Contact corruptedCertificate certificate. selected the for begun yet not yet valid not Certificate certificate. selected the for Expired certificate p. settings", 106. trust the "Change See certificate. the use to application trusted not Certificate Options is shown even if the certificate should be valid, check > Certificate details Certificate Expired certificate Expired —The period period —The of validity has ended —The certificate cannot be used. used. be cannot certificate —The —You have not set any any set not have —You —The period of validity has validity of period —The . When you open open you When . or Certificate not 105 Tools 106 Tools Select • • • For example: is shown. certificate selected the use can that applications Trust settings use theplug-ins for authentication. mode security WPA and as a data bearer LAN wireless use that points access internet Some service). (network device your in installed currently plug-ins EAP the view can You EAP plug-ins track the distribution of the files. to identifier the use can file music the of provider The file. the forward or send you if file music the with sent be to transactionidentifier.the identifier you allow Select whether files a may include music Some copyright-protected Track protectionobject and select certificate, Scroll to an authority owner. listed the to belongs really certificate the that sure that youreally trust the owner of the certificate and make you must settings, certificate any changing Before settings trust the Change the origin of a new Java application. Java new a of origin the App. installation Internet application. system operating Symbian of a new origin the certify to Symbian installation Options > . Depending on the certificate, a list of the the of list a certificate, the on . Depending Yes > Edit trust setting trust Edit —The certificate is able to certify servers. certify to able is certificate —The > Yes > —The certificate is able to certify certify to able is certificate —The Yes —The certificate is able certificate —The to change the value. tothe change Options > including data data calls. including select select is active, option option. To call the desired whether Select check restriction provider. service your from password restriction the need you settings, the To change device. the with receive or make you that calls restrictionCall same time. the in is shown at the active be cannot forwarding call and restriction Call mode. standby forwarded, are calls all When time. the same active at can be options forwarding Several off, select or on option the set select is active, option whether check To select calls, incoming decline you or when busy is forwarding option. To forward voice calls when your number desired the and forward to want you calls which Select provider. service your contact details, For number. phone another or mailbox voice your to Call forwarding Activate Call forwarding Call restriction or or (network service) allows you to restrict the the restrict to you allows service) (network allows you to forward your incoming calls calls incoming your you to forward allows Cancel Check status . Call restriction Call Activate . To itset on or off, or Check status affects all calls, calls, all affects Cancel If busy If . . To . To . a roaming agreement with your home cellular network. cellular home your with agreement roaming a have must network selected The a network. to reselect you and asks tone error an sounds device lost, the is network selected manually to the If connection the of list networks. networks, or available the of one select and search, to want you which Operator selection details. more for provider service your Contact providers. the roaming agreements between the wirelessservice automatically, according to the network parameters and Dual mode service provider)—Select which network to use. If you select . mode Network in with is indicated network Themode. UMTS standby the with is indicated network GSM The UMTS networks. GSM and the between switch automatically can device Your numbers. emergency official certain to possible be may calls restricted, are calls When same time. the at active be cannot call forwarding and restriction Call services services of otherproviders. service the use to provider service one of users the enable to providers service network or more two between Glossary: , the device uses the GSM or UMTS network network UMTS or GSM the uses device , the Network Manual (shown only if supported by the wireless the wireless by if supported only (shown A roaming agreement is an agreement agreement an is agreement A roaming —Select to manually select the network from a from network the select manually to Automatic to set the device for for device the set to Press , and select select , and TTY Press If you are usinga time-out. the after off switched Lights is available not answer for Automatic disabled. to is set type ringing the If seconds. 5 after automatically call incoming answer Automatic 95. p. tones", "Profiles—set See device. your to enhancement certain a connect you time each profile Default Car kit network (MCN) technology and to activate cell info reception. info cell activate to and technology (MCN) network microcellular on based network cellular in a used it is when Select Select connected. is Cell info display info Cell optbelosti once n that a a indicates compatible loopset and is connected that the headset is unavailable, is lost. or a headset a to connection Bluetooth headset a compatible indicates is connected and mode, standby the In > (for car kit)—Set whether lights remain on or are or on remain lights whether car kit)—Set (for Use TTY Headset and from the following: the from and Enhancement settings Enhancement Beep once , > —Set the profile that you want activated want you profile that the —Set Loopset —Select —Select TTY Yes —Set if you want the device to answer an an answer to device the want if you —Set . , you must activate it on your device. it on your device. activate , must you Tools or , On TTY > Silent to set thedevice toindicate , Settings Bluetooth handsfree Bluetooth , automatic answer is is answer automatic , > Enhancement TTY TTY . , or , or

> 107 Tools 108 Tools Ratio or format TV configuration applications and profiles, press , and select select and , cm. Voice press profiles, and applications To activate enhanced voice commands for starting 55. p. dialing", "Voice see device, by your supported commands voice enhanced the about information You use voicecontrol can commandstoyour device. For more system TV following: the , Press and select Options Tolisten to thesynthesized voice tag, select acronyms. and abbreviations, names, short very Avoid command select application, the start to used application To add more applications to the list, select select list, to the applications To more add list. the in displayed or profile voice a say and mode the standby in application the of name is the command voice The command. hold and press applications and profiles. To use enhanced voice commands, —Select —Select > NTSC and enter the new voice command as text. text. as command voice new the enter and —Select —Select > Playback . . To that add a voice command second can be Voice commands Profiles 4:3 for NTSC TV system format. system TV NTSC for or PAL . . The device creates voice tags for the the for tags voice creates device . The 16:9 Tools for PAL and SECAM TV system TV system and SECAM PAL for . > TV out TV Options . Select from from Select . Options > Change Change Tools > New > select Press , Press and select select language, device selected in the commands tags and voice Settings select settings, command voice To change • J2ME™ applications based on based applications J2ME™ • device: your to software and of applications types two (local disk). card memory a to file the save file, a transfer to Explorer Windows Microsoft use you If device. your to application an install to Suite PC Nokia in Installer Application Nokia use can You infrared. or connectivity Bluetooth using or attachment, e-mail an as message, a multimedia you in to compatible computer, downloaded during browsing, or sent a from device your to transferred be may files Installation Symbian for suitable the and applications software Other • refer to the official model number of this product. this of number model official the to refer often will providers Software device. Nokia your for .sis the have files installation The ). designed specifically software install Only extension. ( system operating ). ( .jar or .jad extension Synthesizer Reset voice adapts. voice Reset . To switch off the synthesizer that plays recognized recognized plays that synthesizer the off switch To . Application manager Application > Off Tools . To reset voice recognition learning, learning, recognition voice reset To . . > App. mgr. App. Java technology with the the with Java technology . You can install install can . You Options > • To view the application type, version number, and the the and number, version type, application the view To • following: the note installation, Before the that application, Java a card. memory compatible a on is installed application application, .sis a indicates and installed, is not fully application the that and software Install applications inbox. Messaging the from message the delete attachment, is a message file of PC” your in “For PC Suite” “Nokia See memory. device the from files installation the remove to manager file the use then PC, compatible to a files installation up back to PC Suite Nokia from storing other files. To maintain sufficient memory, use you prevent and of memory amounts large may use files The memory. device in the remain (.sis) files installation card, memory compatible a to applications install you After To display the security certificate details of the application, • Options select application, the of or manufacturer supplier select select aaeet,p 105. p. management", passed the Java Verified Java the passed or have Signed Symbian are applications that as such sources, trusted from software other Important: Options Nokia N93 Additional applications Additional N93 Nokia > View details > Only install and use applications and and applications use and install Only View certificate . TM testing. . See "Certificate "Certificate . See . If the .sis .sis the If . 2 1 applications. Java installing for is required .jar file The • you installcontainsa update or repairthat If file an an to • in cardmemory (if inserted) in App. mgr. In olct nisalto ie rs , and select locateTo an installation file, press application. the of manufacturer or supplier the password to access the server. You obtain these from the .jar file, you mayneed to enter a user name and downloading are you When one. select to are asked you the application, for defined point no access is there If it. download ask you may to the device itIf is missing, copy. back-up or the file and re-install the application from the originalinstallation application the remove application, original the restore back-up copy of package. thefull software To removed file or a installation original the if you have application original the restore only can you application, existing you are sure of the origin and contents of the application. device displays installation a Continue warning. only if application without a digital signature or certification, the progress of the installation.arethe you installing If an installation,information During device the about shows to start the installation. press and file, installation the to scroll applications, Messag. App. mgr. App. . Alternatively, search the device memory or a > , select , select Inbox thatcontains an installation file. Options File mgr. File > Install , or open a message . In other . In other Tools > 109 Tools 110 Tools created with that software. documents open to able be no longer may you package, software a remove you If package. software removed the of backup a full or package software the original it if you have only reinstall you can software, If you remove Select Scroll to a software package, and select and package, a software Scroll to Remove applications and software place). in are settings e-mail correct log select removed, or is installed what see can they that so desk help a log to installation your send To select when, and or removed installed are packages software what see To if available. select application, the about information extra to view and connection To start a network . press and menu, the it in locate application, installed an To start > Via text text Via message Yes operation or cause the device to stop functioning. stop to device the cause or operation and affectantivirus performance could functionality application. Having more than one application with Important: to confirm. Options Your device can only support one antivirus antivirus one support only can device Your or > Via e-mail Options View log View > (available only if the the if only (available . Options addressGo to web Options > > Remove Send , . software package for details. for package software Referof tothe installed the documentation working. stop may package software other the removed, you that anotherIf software package depends on thesoftware package that specific application. specific that press , To view the digital rights activation keys stored in your device, select forwarded. or transferred, modified, copied, being from content other and tones), ringing (including music images, some prevent may protections Copyright Options App. mgr. the In components. data extra or downloading for point to a access orto specific be sent, a network connection call, a message a phone require may applications Java Some certificates. online checking address web Default application. an installing before Online certif.check Select Settings Options > main view, scroll to an application, and select select and application, an to scroll view, main Suite settings Suite copyright-protected files copyright-protected keys Activation for > Tools Settings —Select check to online the certificates —Set the default address used when when used address default the —Set > Actv. keys to change settings related to to related settings change to and from the following: the from and , and from, and the following: to them in the device. Not in use in Not key. activation connected no but device in the file media a protected or is there is exceeded file media the using for keys Invalid media files and keys whose validity period has not started yet. keys Valid —View —View keys that connected are to one or more —View keys that have no media files connected connected files no media have keys that —View —View keys that are not valid; the time period period time the valid; not are that keys —View press . press and key, activation an to scroll file, the send to ability and status validity as the such information, detailed To view 47. p. messages", service "WebSee disabled. is reception message service web key activation Get media file, select an invalid activation key and and key activation invalid an select file, media a for period the usage extend or time usage more To buy . Activation keys cannot be updated if updated be cannot keys Activation . Options > 111 Tools 112 Troubleshooting A: Q: Bluetooth connectivity A: Q: responding not Application A: Q: Access codes Q&A Troubleshooting Check that both devices have activated activated have devices both that Check . To open the application switching window, press and hold Why can’t I find my friend’s device? friend’s my find I can’t Why do How I close an applicatio PIN, codes? or PUK lock, the password for is my What Check that bothdevices are compatible. mode. hidden in the is not device other the that Check devices. the between obstructions other or no walls are there that and feet) (33 10 meters over not is devices two the between distance the that Check connectivity. Bluetooth application. the to close press and application, to the Scroll provider. service wireless (ISP) or provider service internet provider, for example, a commercial point access your contact passwords, about information For provider. service network your contact code, a such received not have you or if code, or PUK a PIN or lose forget you If dealer. device your contact code, lock is code lock default The 12345 n that is not responding? is not n that . If you forget or lose the the or lose forget you . If Q: Browser services A: Q: Q: Q: A: Q: Camera A: A: If another device is connected to your device, you can can you device, your to connected is device another If Remove the protective plastic film covering the display display the covering film plastic protective the Remove service your Contact settings. browser correct the Insert Zoom and AF lens movement causes mechanical noise. noise. mechanical causes movement lens and AF Zoom What do I do if the following message is displayed: is displayed: message following do if the I do What connection? a Bluetooth end can’t I Why Why do images or videos captured using night mode tend tend mode using night captured images or videos do Why Why there is audible noise from the camera when autofocus smudgy? look do images Why Bluetooth Select connectivity. Bluetooth deactivating by or device other using the connection the end either by lens movement when recording. recording window is clean. clean. is window and camera. Ensure that camera the lens protection for provider instructions. pointaccess in defined. Define one Services settings. normal mode? normal to compared to be lighting under noisier conditions dark S is used? zoom or optical elect Options > > Off Off > to eliminate mechanical noise caused caused noise mechanical eliminate to . Settings > Optical zoom during during zoom Optical Connect. No valid > ? A: Q: Log A: Q: (UPnP) network Home A: Q: Display A: Q: A: You may have activatedhave a You may filter no communicationevents and This is a characteristic of this type of display. Some displays displays Some of display. type of this characteristic a is This Each video frame is enlarged from a smaller size within within size from a smaller enlarged is frame video Each The output of the image sensor under the dark lighting dark lighting the under sensor image of the output The Why does the log appear empty? log the does Why Why Why do missing, discolored, or bright dots appear on the Why do VGA video frames appear jagged when video when frames jagged appear videoVGA do Why own select events, see all To logged. fitting have been that filter Content sharing settings. Select network home the configured have you that Ensure devices? other with files I share can’t Why a fault. not normal, dots that or pixels contain may screen every time I turn on my device? my on turn I time every screen mode. stabilization without to video compared degraded is frame each within quality the this, to Due activated. is stabilization video when size VGA the to VGA stabilization is activated? stabilization increases. or video image on the level noise the In return, brightness. better provide to mode normal with than mode night with amplified more is conditions > Log > Options Connect. , and the other device is UPnP compatible. UPnP is device the and other , > Filter > Home net. > remain on or off. This is is This or off. on remain All communication > Share content . My > • Store data on a compatible memory card. memory compatible data on a Store • to a connectivity Bluetooth data using Send • Sendimages to youre-mail address, then save the images • data to all back-up of a copy to make PC Suite Nokia Use • A: Q: item). smallest the from (starting one by one first. data some Delete operation. perform to memory enough are shown: notes of the following one and items multiple deleting are you data. If the to remove application respective the data, go to other or any scores,timers, game cost call timers, call notes, calendar information, contact To delete and Images in photos • Saved browser pages • Retrieved e-mail messages fromthe device memory • •Messages from A: Q: Memory low Save your data using on data using your Save You can delete the following items regularly to avoid avoid to regularly items following the delete can You How can I save my data before deleting it? deleting before data save my I can How What can I do if my device memory is low? is memory device if my I do can What memory getting low: getting memory compatible device. computer. your to a compatible computer. or Memory low. Delete some data. some Delete low. Memory Inbox , Gallery Drafts e of the following methods: following of the e , and Sent , try deleting items folders in folders Messag. Not 113 Troubleshooting 114 Troubleshooting A: Q: A: Q: messaging Multimedia A: Q: Messaging A: Q: To stop the device from making a data connection, select select data connection, a from making device the stop To The amount of memory needed is indicated in the error error the in indicated is needed of memory amount The or an number phone a have does not card contact The The device is trying to retrieve a multimedia message from message multimedia a to retrieve is trying device The How can I end the data connection when the device starts device the when connection data the I end can How What should I do when the device cannot receive a receive cannot device the do when I should What contact? a select I can’t Why The The note later, for example, after you have checked the settings. settings. the checked have you after for example, later, multimedia messaging center save the message to be retrieved On receiving msg. Messaging connectionagaina data and again? select differe the memory much how first. data some message: full? is memory because message multimedia card in to contact the information Add the address. missing e-mail Settings or addresses. Select numbers ther that and correctly defined are messaging for multimedia settings the that Check center. messaging multimedia the What is happening? File manager Contacts > Retrieving message Retrieving Not enough memory to re and one of the following: of the one and Multim. msg. Multim. To view what kind of data you have and . > > Defer retrieval Defer Options . Messaging is shown briefly. briefly. is shown nt data groups consume, data groups consume, nt e are no mistakes in phone phone in mistakes no are e > Memory details Memory trieve Delete message. —to havethe > Options . > A: Q: PC connectivity A: Q: A: Q: Wireless LAN Ensure that Nokia PC Suite is installed and running on your your on running is and installed Nokia PC Suite that Ensure Why do I have problems connecting the device to my PC? to my device the connecting problems have do I Why How do I switch wireless LAN (WLAN) off on my Nokia device? pages at support visit the or PC Suite on Nokia function help the see Suite, PC Nokia to use how on information further For PC. user See the for Nokiaguide PC DVD-ROM. on the Suite messaging. to multimedia related connections network any does make not the device After this change, messages. Multimedia recept. Multimedia to you. sent to be waiting are that messages multimedia deletes center messaging to send information notes to needs device the change, this After messages. multimedia On receivingmsg. immediately Retr. select now, message the To retrieve network. the to notes After this change, the device still needs to send information Nokia device does not scan for available networks. for available not scan device does Nokia your that specify can you consumption, battery reduce To device. Nokia your on WLAN off switch cannot You point for oninternet access Nokia your the network device. if you know the correct SSID and have created a WLAN (SSID). You can only access networks that a use hidden SSID The WLAN access point may use a hidden service set identifier its range? within I'm I know though even point access (WLAN) LAN wireless a see I can't Why www.nokiausa.com/support > . > Reject message Off —to ignore all incoming multimedia the network, and the multimedia —to reject all incoming . 2 1 scan: background off the turn To Select Wireless LANWireless Press , and select Scan for networks . Tools > > Never Settings . > Connection > WLAN networks as usual. usual. as networks WLAN use you can and networks, available to available still listens When When 3 To save your changes, select select changes, your save To Scannetworks for is set to set is Done Never . , your Nokia device 115 Troubleshooting 116 Product safety display or before any calls can be made. be calls can any before display or the on appears indicator the charging before minutes a itfew may take discharged, is If the completely battery time. itsover charge lose will battery charged fully a unused, left If lifetime. its to aconnected shorten may charger, overcharging since battery charged fully a leave not Do use. in not when Unplug from electrical and thethe device charger the plug it and to the begin reconnect charging battery. disconnect then charger the to connect be necessary may period, it a for prolonged used been not if has the battery or time first the for used is being battery replacement aIf device. this for designated chargers approved Nokia with only Use only Nokia approved batteries, and recharge your battery are noticeablyshorter than normal, replacethe battery. times standby and talk the When out. wear eventually will it but times of hundreds and discharged charged can be battery The cycles. discharge and charge complete three or two after only achieved battery is of a new performance full The battery. by a rechargeable is powered device Your Charging and discharging information Battery safety Product Do not dispose as household waste. household as dispose not Do possible. when recycle Please regulations. local to according batteries of Dispose damaged. if explode also may Batteries explode. may they a fire as in batteries of dispose not Do freezing. well below in temperatures limited particularly is performance Battery charged. is fully battery the when even temporarily, work may not cold battery or hot a with device A 77°F). and (59°F 25°C and 15°C between battery the keep to try Always battery. of the lifetime and capacity the reduce will conditions, winter or summer in car a closed as in such places, cold or hot in battery the Leaving object. connecting the or battery the damage may terminals the Short-circuiting purse. or pocket your in battery sparea carry you when example, for happen, might battery.) This the on (-) terminalsof the battery. (These look like metal strips negative (+) and positive the of connection direct causes can occur when a metallic object such as a coin, clip, or pen not Do short-circuit the battery. Accidental short-circuiting is damaged. battery that or charger any Never purpose. Use only foruse the itsbattery intended hologram label using the following steps: following the using label hologram logo on the and the packaging, Enhancements inspect OriginalNokia the for look dealer, Nokia authorized an from that you are getting an original Nokia battery, purchase it check To safety. your for batteries Nokia original use Always guidelines authentication battery Nokia mode. standby is in device the while minutes 45 hour 1 to up takes charger AC-4 the with battery the Charging use. device and charging, conditions, network on depending vary may and estimates are times Operation 30fps) (VGA, playback video of min. 180 • 30fps) (VGA, capture video of min. 120 • megapixel) (3.2 pictures 330 • mode offline in playback music of hours 6.7 • 2.3-3.7 hours oftalk time and up to 7.5-10 days • 4.5-5.1 hours oftalk time and up to 8.9-10 days • to: provides up battery BP-6M The Operation times of standby time when operating on a WCDMA network a WCDMA on operating time when standby of network a GSM on operating when time standby of 2 1 hologram Authenticate be verified,return the battery to the place of purchase. inspect the batteryfor authenticity. If authenticity cannot will dealer or point service Nokia authorized Your assistance. for dealer or point service Nokia authorized nearest the to it and take it using from refrain should you battery, Nokia original authentic an not is battery your that believe to reason any If you have the battery. of authenticity of the assurance total a not is steps four of the completion Successful neach siderespectively. on 1, 2, 4 dots 3, and see should right, left, and down, you up, hologram the angle you When angle. another from looking when logo Enhancements Original Nokia the and angle one from symbol hands connecting Nokia the see you should label, the on hologram the at looking When 117 Product safety 118 Product safety 4 3 www.nokia.com/battery visit batteries, Nokia original about more out find To device. the to applying warranty or approval invalidate any also may It enhancements. its and device your to damage and performance poor in result may and dangerous be may the manufacturer by approved is not that battery a Nokia service point or for dealer assistance. The ofuse authorized nearest the to it Take battery. the use not do please battery, Nokia is an authentic the label on hologram the with battery Nokia your that confirm If you cannot authentic? is not battery if your What at instructions the by following valid is code 20-digit the that Confirm row. bottom by the followed row top the at number the from starting reads code 20-digit The numbersare facing upwards. the battery so that the Turn 12345678919876543210. example, for code, a 20-digit reveal to label the of side the Scratch www.nokia.com/battery check . . • Do not paint the device. Paint can clog the moving moving clog the can Paint device. the paint not Do • Do not use harsh chemicals, cleaning solvents, or strong • Do notdrop, knock, or shake the device.Rough handling • as than other the device open to attempt not Do • device the When cold areas. in device the store not Do • temperatures areas. High in hot store the not device Do • Its areas. dirty dusty, in device store the or use not Do • all and humidity, Precipitation, dry. device the Keep • coverage. warranty your protect you help will below suggestions The care. with treated should be and craftsmanship and superior design is a product of device Your Care and maintenance parts parts and prevent proper operation. device. the clean to detergents mechanics. fine and boards circuit internal break can guide. in this instructed boards. circuit electronic and damage device the inside form can moisture temperature, normal its to returns batteries, and warp or certain melt plastics. damage devices, electronic of life the shorten can moving parts and electronic components can be damaged. it. replacing before completely dry to device the allow and battery, the remove wet, get does device If your circuits. electronic corrode will that minerals contain can or moisture of liquids types prohibited or when it may cause interference or danger. or danger. interference it may or cause when prohibited is use its when device your off switch always and area, any in force in regulations special any follow to Remember Operating environment children. small of reach the of out them Keep parts. small contain may enhancements its and device Your information safety Additional service. for facility service properly, it the nearest authorized take to working is not device any If enhancement. or any charger, battery, device, your to equally apply suggestions above the of All off, the and device reset, power to the To device allow • (such to keep you want of data a backup create Always • Use chargers indoors. • replacement approved an or the supplied only Use • Useasoft, clean, dry cloth to clean any lenses (such • performance. Make back-up copies of all important data. important all of copies back-up Make performance. remove thebattery fromtime to time for optimum facility. service a to device as contacts and calendar notes) before sending your devices. radio governing regulations violate and may device the damage could attachments or antenna. Unauthorized antennas, modifications, lenses). sensor light and sensor, proximity camera, as stored on them may be erased. be may them on stored magnetic storage media near the device, because information attracted to the device. Do not place credit cards or other be may materials Metallic magnetic. device are of the Parts completed. is transmission the until followed are instructions distance separation until suchconnection a is available. Ensure the above delayed be may messages or files data of transmission cases, a In requires good quality to some connection the network. In orderto transmit data files or messages, this device body. the the from device distance your above-stated not and should itposition contain metal operation, should body-worn for used is holder or clip, belt case, carry a When body. the from away inches) (7/8 centimeters 2.2 least at against the ear positioned or position normal the when use in either used when guidelines exposure RF meets device This positions. operating normal only in its device the Use facilities when any regulationsfacilities when any care health in device your off Switch questions. any have you adequately shielded from or are they external RF if energy if determine to device medical the of manufacturer the or inadequately protected medical devices. Consult a physician of with functionality the interfere may phones, wireless including equipment, transmitting radio any of Operation devices Medical qimn htcudb estv oetra Fenergy. equipment that could be sensitive to external RF you to do so. Hospitals or health care facilities bemay using posted in these areas instruct in these areas posted 119 Product safety 120 Product safety or any equipment that has been added. been has that equipment or any vehicle your of representative its or manufacturer the with check information, For more bag systems. air and systems, control speed electronic systems, braking (antilock) antiskid electronic systems, injection fuel electronic as such vehicles motor in systems electronic shielded or inadequately installed improperly affect may RF signals Vehicles provider. service your consult occurs, interference aids. If Some digitaldevices wirelessmay interfere with some hearing aids Hearing away. device the move and device, your off switch interference, suspect If you pacemaker the opposite ear the to device the Hold • pocket a breast in device thecarry Not • centimeters 15.3 more than device the keep Always • should: pacemakers with Persons Research. of Technology Wireless recommendations and by research independent the with consistent are recommendations These pacemaker. the with interference between a wireless phone and a pacemaker to avoid potential maintained be (6 inches) centimeters of 15.3 separation a minimum that recommend manufacturers Pacemaker Pacemakers to minimize the potential for interference. for potential the minimize to pacemaker their from inches) (6 refueling points such as near gas pumps at service stations. stations. service at pumps gas near as such points refueling in orbodily even injury off Switch the device death. at areasSparks or could an explosion fire in cause such resulting engine. vehicle turn off your to advised be normally would Potentially explosive atmospheres include areas where you and instructions. all and obey signs atmosphere, explosive a potentially with area any in when device your off Switch environments explosive Potentially illegal. be may and network, the operationof the aircraft, disrupt the wireless telephone may beto an dangerous in aircraft wireless teledevices of an aircraft. use before boarding The your device off Switch prohibited. is in aircraft flying while your device Using the air bag could result. injury serious inflates, and installed is improperly equipment wireless in-vehicle If area. deployment bag air in the air bag or theover area the objects, including installedor portable wirelessequipment in placenot force. Do inflate with great air bags that remember equipped an with For vehicles enhancements. air bag, its parts, the device, or as the compartment in same materials explosive Do not store or carry flammable liquids, gases, or properly.operating vehicle and in your is mounted equipment device wireless all that regularly Check device. the to apply may that warranty any invalidate may and dangerous be may or service installation Faulty vehicle. a in device the Only qualified personnel should service the device, or install Emergency calls powders. metal or dust, wherethe air contains chemicals particles or as such grain, areas and butane), or as propane (such gas petroleum liquefied using vehicles facilities, storage or transfer chemical boats, on deck below include They marked. clearly always not but often are atmosphere explosive potentially a with Areas progress. in are operations blasting where or plants chemical areas, distribution and storage, depots, fuel in equipment radio of use the on restrictions Observe 3 2 1 call: emergency an To make location. Emergency numbers vary by location. vary numbers Emergency location. present your for number emergency official the Enter display the clear to needed as times many as calls. for device the ready and Press device. the in inserted properly is card SIM a valid that require may networks Some strength. signal adequate for Check on. it switch on, not is device If the medical emergencies. medical like communications essential for device wireless on any solely rely never should You be guaranteed. Because of this, connections in all conditions cannot landline networks, and user-programmed functions. networks, wireless signals, radio using operate Important: Wireless phones, including this device, device, this including phones, Wireless in all tested frequency bands. The actual SAR level of an an of level SAR actual The bands. frequency tested all in the device transmitting at its highest certified level power operating positions standard using conducted SAR are with for tissue. Tests of grams 10 over averaged (W/kg) kilogram watts/ is 2.0 guidelines ICNIRP the in stated limit SAR The measurement known as the Specific Absorption Rate or SAR. The exposure guidelinesfor mobile devices employa unit of and health. age of regardless persons, of all protection the assure to designed margins safety include and ICNIRP organization scientific independent by the developed were guidelines These guidelines. international by recommended waves radio to exposure for limits the exceed to not designed is It receiver. and transmitter radio is a device mobile Your WAVES.TO RADIO DEVICEGUIDELINES EXPOSURE MOBILE THIS MEETS FOR Certification information (SAR) to do so. to permission given until call the end not Do an accident. of scene the at communication of means only the be may device wireless Your possible. as accurately as information give all call, necessary the emergency an making When information. more for provider service your or guide this features off before you can make an emergency call. Consult those turn to need first may you in use, are features certain If 4 rs h key. the Press 121 Product safety 122 Product safety equipment authorization system using FCC ID: QVVRM-55. QVVRM-55. ID: FCC using system authorization equipment at found can be model device this about Information W/kg. is 1.23 body the on worn properly when and W/kg is 0.69 ear the for use at certification during product this standard under over 1 gram of SAR value The reported tissue. highest averaged W/kg 1.6 of limit SAR a set requirements These Canada.(USA) and Industry Commission Communications Federal the by established waves radio to exposure for the requirements meet to is also designed device mobile Your at information product under provided be may SAR information Additional band. network the and requirements testing and reporting national on vary may depending values SAR values. SAR different in result may enhancements and accessories of device Use 0.54 W/kg. guidelines for useof the device atthe ear is ICNIRP the under value SAR highest The station. base a network you are to close as how such of factors number on a depending changes amount That network. thereach to required power the only use to designed is device the operating device can be below the maximum value because http://www.fcc.gov/oet/fccid www.nokia.com by searching the the by searching . Technical Information Technical etr Specification Size Weight Feature Operating temperature Operating voltage Battery power output Transmitter Frequency range Volume: 8.12 in 8.12 Volume: Battery mAh 1100 BP-6M with oz.) (6.35 grams 180 (-10°C to + 55°C) + to (-10°C 131°F + to 14°F V 3.7 dc W Up to 2 MHz (RX) 2110-2170 MHz (TX) 1920-1980 2100 WCDMA (RX) MHz 1930–1990 (TX) MHz 1850–1910 1900 GSM (RX) MHz 1805–1880 (TX) MHz 1710–1785 1800 GSM (RX) MHz 925–960 (TX) MHz 880–915 900 GSM 1.11 in (28.2 mm) Thickness: 2.19 mm) in (55.5 Width: mm) in (118.2 4.65 Length: 3 (133 cm (133 3 ) applications backing up backing B access points A dialing 1-touch Numerics Index Bluetooth alarms bookmarks activation keys activation security pairing headset installing device address device connecting two devices, pairing devices, two connecting switching off switching settings alarm clock Java

108

80

67 20

83

107 82 101

100 109

110

55 16

83

83

82 cache, clearing C camera calendar call log call calls settings for call forwarding for call settings image setup settings setup image saving video clips video saving self-timer editing videos editing synchronizing PC Suite synchronizing settings duration sequence mode flash international adjusting lighting and color and lighting adjusting create entries create See scenes imaging mode imaging received transferring dialed numbers log

27

28

100 61 62

27 69

60

54

71 30 12

61 27

23

27

71

106 27 conference call computer connections computer copying certificates contact cards contact clock screen clear connection settings connection codes copyright protection copyright still image camera settings camera image still sending inserting pictures inserting storing 1-touch tones 1-touch storing contacts between the SIM card and and SIM card the between contacts security code security See settings PIN2 codePIN2 PIN code lock code video recorder settings alarm see activation keys activation see

16 104 standby standby mode device memory device

16 105

64 16

104 64

104 54

104

100

64 80

65

61 24

26 123 Index 124 Index digital rights management, DRM management, rights digital device manager device file formats file F videos editing E connections data D date e-mail

.sis remote mailbox remote adding sound clips sound adding opening see activation seekeys activation indicators .jad effects adding details RealPlayer retrieving from mailbox from retrieving viewing attachments viewing custom video clips custom settings ending automatic retrieving automatic .jar adding transitions adding 16

44

108 108, 109 108, 108

88 88

50 48

15

75 89

30

47

30 30 30

48 48

47 internet internet accesspoints (IAP) Home network Java J indicators I handsfree H gallery G headset settings help application help file manager file fixed dialing FM radio presentations TV out mode out TV backup files backup See See See see ordering files in albums in files ordering

29 loudspeaker access points web applications

73

15

65 21

18

22

107 40

33 33

33, 34 loudspeaker log messaging mailbox M lock code L log duration memory modem loopset settings loopset menu, rearranging menu, media files memory card rewind erasing contents text messages automatic retrieving automatic file formats file e-mail filtering multimedia messages multimedia viewing memory consumption memory viewing clearing memory clearing mute sound mute fast forward fast

89 47

104

44

76

16

63 62 20

107

75 76 76

95 44

62 21, 61, 62 61, 21,

48 44

21 music player phonebook packet data connections packet P applications office O modes multimedia messages multimedia profiles PC Suite movies, muvees PC connections PC mute sound mute personalization PIN code PIN view mode view transferring music files files to your music transferring See settings fold closed fold open imaging transferring music transferring viewing device memory data memory device viewing calendar data quick muvees

95 contact cards contact

memory card 104

76 103 37 12

12

96 80 12 11

78 71 91

44

37 38

21 settings remote mailbox remote security code security S radio R Quickoffice Q remote SIM mode SIM remote service commands ringing tones ringing sending date and time and date access points data connections call restriction call receiving in a text receiving message access codes See call forwarding call Bluetooth connectivity Bluetooth calendar certificates display personal ringing tone ringing personal video clipsvideo contact cards, business cards business cards, contact

73 lock code lock

91 99

72

31 47 105

104

101 81

42 103

106 106

100

65, 66

81

46

64 songs sis file svg files svg software SIM card shortcuts sound clips sound sounds synchronization snooze standby mode standby original settings original transferring language PIN code names and numbers and names recording sounds recording transferring filedevice a your to copying names and copying numbers UPUK code muting a ringing tone ringing a muting messages screen saver personalizing the the phone personalizing lock code UPIN code UPIN

108 16

33 to phone

13

29

104 98 104 95 49

104

105

87 38 99

65

99 90

65

60

95

108 125 Index 126 Index themes time transferring music transferring Universal Plug and Play Plug Universal U text messages T transferring content from content transferring USSD commands USSD UPUK code UPIN code UPIN

security 16

96 another device another

104 105

85

44

42

38

18 14 voice mailbox voice video clips video video call V voice dialing voice Visual Radio player video voice commands voice viewing content declining forwarding calls to voice mailbox answering See visual service ID changing the phone number phone the changing RealPlayer

56 29

73 55

60 54 60

108

74 74

54

106 voice messages voice tags volume control web W wireless LAN making calls making loudspeaker security access point settings point access during a call a during browser see points, access see also create IAP create

108

Universal Plug and Play Universal 85 67 17

88 16 54

16 55 54 access points access

102 Manual del Usuario Nokia N93

Importante: Para evitar cualquier error de funcionamiento y evitar daños, lea detalladamente este manual de instrucciones antes de conectar y operar este aparato. Conserve el manual para referencias futuras.

9255380 EDICIÓN 1ESP 127 DECLARACIÓN DE CONFORMIDAD Hi/fn ®, LZS ®,©1988-98, Hi/fn. Incluye una o más patentes de los Estados Unidos: Por este medio, NOKIA CORPORATION, declara que este producto RM-55 se adapta Nº 4701745, 5016009, 5126739, 5146221 y 5414425. Otras patentes pendientes. a las condiciones dispuestas y otras provisiones relevantes de la Directiva 1999/5/ Parte del software en este producto es © Copyright ANT Ltd. 1998. Todos los EC. Existe una copia de la Declaración de Conformidad disponible en la dirección derechos reservados. http://www.nokiausa.com/phones/declaration_of_conformity/. Este producto está autorizado bajo la Licencia en Cartera de Patentes Visual MPEG-4 (i) para uso personal y no comercial en relación con la información que ha sido codificada de acuerdo con el Estándar Visual MPEG-4 por un consumidor que se dedica a una actividad personal y no comercial y (ii) para su uso en relación con Este símbolo significa que dentro de la Unión Europea el producto debe el video MPEG-4 provisto por un proveedor autorizado de video. Ningún permiso entregarse en un local especial para su eliminación luego de finalizada su es concedido o será implícito para cualquier otro uso. Más información incluso vida útil. Este reglamento se aplica tanto a su dispositivo como a cualquier lo relacionado a los usos comerciales, internos y de promoción podrían obtenerse accesorio marcado con este símbolo. No deseche estos productos junto de MPEG LA, LLC. Ver http://www.mpegla.com. con los demás desperdicios domésticos. Para obtener información acceda This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for a la Eco-Declaración del producto o a la información específica de su país personal and noncommercial use in connection with information which has been por la dirección http://www.nokia.com (para EE.UU.) y encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged http://www.latinoamerica.nokia.com (para Latinoamérica). in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 © 2006 Nokia. Todos los derechos reservados. video provided by a licensed video provider. No license is granted or shall be implied Nokia, Nokia Connecting People, Nseries, N93, Visual Radio y Pop-Port son marcas for any other use. Additional information including that relating to promotional, comerciales o marcas registradas de Nokia Corporation. Nokia tune es una marca de internal and commercial uses may be obtained from MPEG LA, LLC. sonido registrada de Nokia Corporation. Otros nombres de productos y compañías aquí See http://www.mpegla.com. mencionados pueden ser marcas registradas o marcas comerciales de sus Nokia opera bajo un sistema de desarrollo continuo. Nokia se reserva el derecho de respectivos propietarios. hacer cambios y mejoras en cualquier producto descrito en este manual sin previo aviso. Se prohíbe la duplicación, transferencia, distribución o almacenamiento parcial o BAJO NINGÚN CONCEPTO NOKIA SERÁ RESPONSABLE POR CUALQUIER PÉRDIDA de todo el contenido de este documento, en ninguna forma sin previo permiso DE DATOS O GANANCIAS O POR CUALQUIER OTRO DAÑO ESPECIAL O INCIDENTAL, escrito por Nokia. POR CUALQUIER CAUSA DIRECTA O INDIRECTA. Este producto incluye software con licencia de Symbian EL CONTENIDO DE ESTE DOCUMENTO ESTÁ PROVISTO 'TAL CUAL'. ADEMÁS DE LAS Software Ltd (c) 1998-2006. Symbian y Symbian OS son EXIGIDAS POR LAS LEYES, NO SE EMITE NINGUNA OTRA GARANTÍA DE NINGÚN marcas registradas de Symbian Ltd. TIPO, SEA EXPRESA O IMPLÍCITA, INCLUYENDO PERO SIN LIMITARSE A, GARANTÍAS IMPLÍCITAS DE MERCADEO Y DE CAPACIDAD PARA UN PROPÓSITO PARTICULAR, EN CUANTO A LA PRECISIÓN, FIABILIDAD O CONTENIDO DE ESTE DOCUMENTO. NOKIA SE RESERVA EL DERECHO DE REVISAR ESTE DOCUMENTO O RETIRARLO EN CUALQUIER MOMENTO SIN PREVIO AVISO. Java™ y todas las marcas basadas en Java son marcas, registradas o no, de Sun Microsystems, Inc. La disponibilidad de ciertos productos puede variar por región. Consulte con su distribuidor local Nokia más cercano. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Incluye una o La disponibilidad de las funciones y productos puede variar dependiendo del país y el más patentes de los Estados Unidos: Nº 4701745, 5016009, 5126739, 5146221 y operador, por favor consulte a su distribuidor local para obtener mayor información. 5414425. Otras patentes pendientes. 128 CONTROLES DE EXPORTACIÓN Es posible que las aplicaciones de terceros provistas con su dispositivo hayan sido Este dispositivo puede contener bienes, tecnología o software sujeto a leyes y creadas y pertenecen a personas o entidades que no son afiliadas a/o relacionadas regulaciones de exportación de los Estados Unidos y otros países. Se prohíbe su con Nokia. Nokia no es el propietario de los copyrights o derechos de propiedad desvío contraviniendo las leyes. intelectual a estas aplicaciones a terceros. Por lo tanto, Nokia no asume ninguna responsabilidad por cualquier soporte al consumidor o por la funcionalidad de estas AVISO FCC / INDUSTRIA CANADIENSE aplicaciones, ni por la información presentada en las aplicaciones o en estos materiales. Su dispositivo puede causar interferencias radioeléctricas o televisivas (ej., cuando usted Nokia no provee ninguna garantía para estas aplicaciones. usa su teléfono muy próximo a equipos receptores electrónicos). La FCC/Industria AL USAR LAS APLICACIONES USTED RECONOCE QUE LAS APLICACIONES SON Canadiense puede exigirle que deje de usar su teléfono si tales interferencias no se PROVISTAS TAL CUAL SIN GARANTÍA DE CUALQUIER TIPO EXPRESADA O IMPLÍCITA Y pueden eliminar. Si necesita ayuda, comuníquese con su centro de servicio local. Este A LA EXTENSIÓN MÁXIMA PERMITIDA POR LA LEY APLICADA. USTED RECONOCE QUE aparato cumple con la sección 15 de los reglamentos de la FCC. El funcionamiento de NI NOKIA NI SUS AFILIADOS HACEN REPRESENTACIONES O GARANTÍAS ALGUNA, este dispositivo está sujeto a las siguientes condiciones: (1) el dispositivo no debe causar SEAN EXPRESADAS O IMPLÍCITAS, INCLUYENDO PERO SIN LIMITARSE A, GARANTÍAS interferencia perfudicial, y (2) este dispositivo debe aceptar cualquier interferencia DE TÍTULO, MERCADEO O DE CAPACIDAD PARA UN PROPÓSITO PARTICULAR O QUE recibida, incluso interferencia que pueda causar un funcionamiento no deseado. LAS APLICACIONES NO INFRINJA CUALQUIER PATENTE, COPYRIGHT, MARCAS Cualquier cambio o modificación que no haya sido expresamente aprobado por Nokia REGISTRADAS U OTROS DERECHOS DE TERCEROS. puede anular la autoridad del usuario para operar este equipo. EDICIÓN 1 ESP, 9255380

129 130 Contenido ua...... 150 Guía...... 150 Ayuda...... 149 archivos...... de Administrador 147 de memoria...... Tarjeta 147 Web...... Explorador 146 doméstica...... Red 145 ...... inalámbrica LAN 145 el lente...... cubrir y para muñeca la para Correas 145 ...... Auricular 144 ...... Reloj 143 y de volumen altavoz...... Control 143 teclas)...... de (Bloqueo teclado el Bloquear 142 ...... esenciales Indicadores 141 dispositivo...... otro desde contenido Transferir 141 Configuraciones...... 140 ...... directos Accesos 138 Modos...... 138 Nokia N93 Su ...... 137 Conexiones ...... 133 su seguridad Para Contenido ae oisd euia elsacio...... 172 archivos...... los de de seguridad copias Hacer 171 imágenes...... Imprimir 168 de música...... Reproductor multimedia...... 168 Aplicaciones 164 línea...... en Compartir 163 línea...... en Imprimir 163 ...... Álbumes 163 Presentaciones...... 162 de TV...... salida de Modo 162 ...... diapositivas de Presentación 161 imágenes...... Editar 160 ...... videoclips Editar 159 y videoclips...... imágenes Ver ...... 158 Galería 153 fotos...... Tomar 151 ...... videos Grabar Cámara...... 151 ecra opa lmno ...... 203 elementos y comprar Descargar Explorar...... 202 de conexión...... 202 Seguridad de Vista Favoritos...... 201 ...... 201 Web acceso de Punto 201 Servicios...... de contacto...... 200 grupos Crear ...... 200 contactos para timbre de tonos Agregar contactos...... 199 Copiar ...... 198 y números nombres Guardar 198 ...... Contactos (directorio) Registro...... 195 llamada...... 193 una o rechazar Contestar ...... 190 de video (servicio Compartir red) red)...... 189 de (servicio video de Llamadas voz...... 187 de Llamadas 187 ...... llamadas Realizar mensajes...... 182 de Configuraciones SIM...... 182 tarjeta la en mensajes Ver ...... 179 correo de Buzón ...... 178 mensajes recibir entrada: de Buzón ...... 176 mensajes y enviar Escribir ...... 174 texto Escribir 173 ...... Mensajería ofgrcoe e ...... 204 Web Configuraciones conexión...... 203 una Finalizar Módem ...... 226 Módem de dispositivos...... 225 Administrador de conexiones...... 224 Administrador Sincronización...... 224 Red doméstica...... 220 ...... 219 infrarrojos de Conexión ...... 215 Bluetooth Conectividad de Cable datos...... 215 PC...... 215 Conexiones 215 Conectividad...... 214 Juegos de Director películas...... 212 Flash...... 211 Reproductor ...... 209 RealPlayer red)...... 207 de (servicio Radio Visual 207 Personal...... de la agenda...... 206 Configuraciones agenda...... 206 de la entradas sus Administrar agenda...... 206 la de Vistas de reunión...... 206 Solicitudes ...... 205 agenda la de entradas Crear 205 ...... Agenda 131 Contenido 132 Contenido Configuraciones...... 237 ...... 237 propia Tecla 237 ...... Herramientas ...... 235 Modo activo standby dispositivo...... 235 su de la apariencia Cambiar ...... 234 tonos configurar Perfiles: 233 Personalizar su dispositivo...... barras...... 231 código de de Lector reader...... 230 Adobe Quickoffice...... 228 zip...... 228 Administrador ...... 227 Notas Calculadora...... 227 Convertidor...... 227 Grabadora...... 227 227 Trabajo...... nie...... 264 Índice...... técnica...... 263 Información seguridad...... 259 de adicional Información mantenimiento...... 258 y Cuidado Nokia.....257 baterías de autenticación la para Normas ...... 256 baterías las sobre Información 256 ...... del producto Seguridad ...... 252 y Respuestas Preguntas 252 problemas...... de Solución copyright...... 251 por protegidos de activación para archivos Claves aplicaciones...... 249 de Administrador voz...... 248 de Comandos televisor...... 248 de Configuración completo para obtener más información. más obtener para completo usuario del manual Lea el o ilegal. peligroso ser puede ellas de incumplimiento El normas. sencillas estas Lea su seguridad Para interferencias en los aviones. los en interferencias causar pueden celulares dispositivos Los Respete todas lasrestricciones existentes. APAGUE EL TELÉFONO EN LOS AVIONES. cerca de equipo médico. encuentre se cuando dispositivo el Apague Respete todas lasrestricciones existentes. LOS HOSPITALES. EN EL TELÉFONO APAGUE su rendimiento. afectan que interferencias a susceptibles ser pueden móviles INTERFERENCIAS. la seguridad vial. ser debe conduce cuando prioridad Su conduce. manos libres maniobrar para el vehículo mientras las siempre Mantenga locales. las todas leyes TODO. ANTE VIAL SEGURIDAD LA o peligro. interferencia pueda causarteléfonos móviles esté prohibido o No donde el encienda el dispositivo uso de SEGURA. EN FORMA EL TELÉFONO ENCIENDA Todos los dispositivos Todos los dispositivos Obedezca Obedezca resistente al agua. Manténgalo seco. Manténgalo agua. al resistente TELÉFONO. EL MOJE NO incompatibles. productos conecte No aprobados. accesorios y Y BATERÍAS. ACCESORIOS producto. este o reparar instalar puede calificado técnico servicio de personal SERVICIO TÉCNICO CALIFICADO. antena. la con innecesario del producto. Evitedocumentación el contacto en la explica se como normal la posición en sólo ÚSELO CORRECTAMENTE. se estén donde realizando explosiones. dispositivo el utilice No existentes. restricciones EXPLOSIONES. REALIZAN APAGUE EL TELÉFONOCERCA DE DONDE SE químicos. ni elementos combustibles de estaciones cerca Tampoco deservicio. las COMBUSTIBLE. CARGUE CUANDO EL TELÉFONO APAGUE No utilice el dispositivo en el dispositivo No utilice Su dispositivo no Su dispositivo es Respete todas las todas las Respete Use el dispositivo dispositivo el Use Utilicebaterías sólo Sólo 133 Para su seguridad 134 Para su seguridad obtener más información sobre redes. sobre información más obtener para servicios de proveedor su con Comuníquese 2100. para ser usado en lasredes GSM 900,1800, 1900 y UMTS aprobado esta manual este en descrito celular El dispositivo Acerca de su dispositivo at u eiaisrcinsd hacerlo. de instrucciones reciba que hasta pulse luego emergencia, de el número Ingrese aparece en pantalla y regresar al modo standby. tantas que lo borrar para necesario sea como veces abierta. tapa Pulse de modo el en solamente activo está El teclado funcionando. que el teléfono se encuentre encendido y LLAMADAS DE EMERGENCIA. incompatibles. productos conecte No detalladas de seguridad. instrucciones obtener para usuario del manual el lea dispositivo, otro con el teléfono conectar de Antes CONEXIÓN OTROS DISPOSITIVOS. CON dispositivo. su que en guarda importante toda la información de seguridad o llevar un porregistro escrito de COPIAS DE SEGURIDAD. . Indique su ubicación. No finalice la llamada Recuerdecopias hacer Asegúrese de No se pueden ver o modificar todos los formatos de archivo. de formatos los todos modificar o ver pueden se No PowerPoint 2003). y Excel (Microsoft Office 97, 2000, XP y Este dispositivo admite funcionescomunes de Microsoft Word, firewall. un utilizar de además periódica, actualización con antivirus software un instalar de posibilidad la considere dispositivo, su de seguridad la incrementar Para remitente. del fiabilidad la de seguro está si instalaciones y acepte materiales descargue conexión, de solicitudes acepte y sus sólo abra cauteloso Sea mensajes, peligrosos. elementos otros y a maliciosos mensajes y aplicaciones a también no solo virus, sino a expuesto está su dispositivo ordenadores, los con sucede igual que Al conectividad. de Se puede conectar su dispositivoInterneta y a otrossistemas contenidos. otros de tonos (incluyendo de imágenes, timbre) desvío y música o transferencia modificación, la copia, impedir puede intelectual propiedad de derechos los de La protección intelectual. propiedad de derechos la de de los los protección incluyendo legítimos demás, los derechos la privacidad y respete y todos las leyes todas obedezca dispositivo, este de las funciones use Cuando situación de peligro. de situación o interferencia causar pueda uso su cuando móvil encienda el dispositivo dispositivoencendido.No esté el que necesario es la alarma, excepto dispositivo, Advertencia: Para usar cualquier función de este este de función cualquier usar Para de red en esta guía están designadas por (servicio de red). de por (servicio designadas están guía esta en red de Las idioma. funciones del dependen que y caracteres servicios no redes puede algunas todos que ejemplo, admitan los de Por red. los servicios el uso de afecten que limitaciones tener pueden redes Algunas aplicables. cargos los de serviciosde podrá darle instrucciones y cualquier información Su proveedor de red. los servicios de utilizar antes de servicios proveedor su con específicos arreglos hacer que tenga redes otras para que posible es redes; las todas en disponibles no red Estas funciones están especiales. de funciones de servicios móviles. Muchas de las funcionesde dependen proveedor un con suscrito estar debe se el teléfono, usar Para de red Servicios Internet. de sitio cualquier con haría lo como contenido, todasadopte re las precauciones responsabiliza, ni respalda estos sitios. Si pretende accederlos, se no Nokia Nokia. a asociados no terceros por provistos a sitios acceso el permitir o puede preinstalados, enlaces o de sitios favoritos algunos tener puede dispositivo Su cercano. más autorizado servicio de centro al llévelo correctamente, funcionando está no el dispositivo que de sospecha alguna tiene Si normal. es esto casos, los de mayoría la En calentarse. puede dispositivo velocidad, el de de alta datos o conexión compartido video de activa sesión una como funcionamiento, el Durante lativas a la seguridad y al y la seguridad a lativas servicios u otro proveedor. otro u servicios de proveedor su ser Puede SIM. tarjeta su de proveedor con el de de los servicios SIM, tarjetas comuníquese uso y disponibilidad sobre información más obtener Para tecnologías. estas para la red de soporte requieren MMS, o sobre el explorador utilizando descargable contenido y e-mail explorador, MMS, como dispositivo, este de funciones Algunas TCP/IP. protocolos los en ejecutan se que (HTTP y SSL) 2.0 WAP protocolos los admite dispositivo Este información. más obtener para servicios de proveedor menú e iconos. su Comuníquesecon especial, como cambios en nombres de menús, órden del configuración una tenga también dispositivo su que posible De serasí, éstas funciones no apareceránen el menú. Es o no activadas. inhabilitadas sean de su dispositivo funciones ciertas que pedido haber puede servicios de proveedor Su Unidos. Estados los en disponible está no Nokia Club También funcionan. cómo manera la en limitadas estén Radio Visual como funciones, otras que posible Es América. de Unidos Estados los en redes las con compatibles son no instantánea mensajería y instantánea comunicación video, compartir video, llamadas de ejemplo, Por dispositivo. este en ofrecidas las funciones todas admiten no redes las Todas países. muchos en celular servicio de redes con compatibilidad para su diseñado está Nokia dispositivo Este 135 Para su seguridad 136 Para su seguridad Accesorios, baterías y cargadores baterías Accesorios, La batería diseñada para uso con este dispositivo es BP-6M. es dispositivo este con uso para diseñada La batería cuando se usan ACP- ACP-9, ACP-8, ACP-7, los cargadores DC-4, AC-3 o AC-4 y con los cargadores AC-1, uso con su para diseñado está dispositivo Este dispositivo. este con usarlo de antes cargador del modelo el Verifique batería. la retirar de antes elSiempre el y apague dispositivo desconecte cargador

con con el adaptador de cargador CA-44. 12, LCH-8, LCH-9 o LCH-12 LCH-8,12, LCH-9 sujete y tire del enchufe, no del cable. no del enchufe, del y tire sujete eldesconecte cable de alimentación de cualquier accesorio, Cuando proveedor. su con comuníquese aprobados, accesorios los de disponibilidad de información obtener Para aprobación o garantía y puede ser peligroso. ser y puede o garantía aprobación de batería, cargador o anularaccesorio puede toda tipo otro cualquier teléfono. El uso particularde de modelo este para Nokia aprobados por accesorios Advertencia : Utilice sólo baterías, cargadores y cargadores sólo baterías, Utilice : Conexiones Consulte "Herramienta de tarjeta de memoria" pág. 148. memoria" "Herramienta de tarjetaConsulte de información. su de seguridad copias de o datos transferir para ejemplo, por compatible, SD micro tarjeta una Use Consulte pág. televisor" de "Configuración 248. Nokia CA-64U para conectarse video de cable el Use 215. pág. "Cable datos" de Consulte PCs. y impresoras como compatibles, dispositivos con conectarse para CA-53 Nokia de conectividad cable Use el 225. pág. inalámbrica" Consulte WLAN. que tengan "LAN y dispositivos a Internet conectarse para inalámbrica LAN Use "Conexión depág. infrarrojos" Consulte 219. datos entre compatibles. dispositivos y sincronizar transferir para de por infrarrojos, ejemplo, Use la conexión pág. "Conectividad 215. Bluetooth" Consulte compatibles. accesorios con y conectarse archivos para transferir por ejemplo, Bluetooth, tecnología Use pág.138 N93" Nokia "Su Consulte 3G. y 2G redes las en su dispositivo Use con un televisor compatible. 137 Conexiones 138 Su Nokia N93 sonido, la reproducción continúa. la reproducción sonido, clip de un para escuchar reproductor el usando Si está pág. 238. cubierta", la de "Pantalla consulte configuraciones, las cambiar Para compatible. auricular un conectado haya o altavoz terminan,ser a no que estéel usando curso en llamadas Las cubierta. de la luces las encienden y se desactiva se principal pantalla la cerrada, la tapa está Cuando cerrada Modo tapa que se active modo. un de antes demora pequeña una Hay pantalla. lade rotación de eje y el la tapa gire modos, alternar entre los Para videos. y imágenes sus ver para ver y fotos y tomar video móvil, imagen del teléfono para uso tradicional abierta tapa portarlo, para cerrada tapa usos: para distintos optimizados mecánicos modos cuatro tiene Su dispositivo Modos en aquí De N93-1 Nokia modelo: de Número Su Nokia N93

adelante denominado Nokia N93.

para grabar en la pantalla principal. pantalla la en mensajes multimedia recibidos, abra la tapa y vea el mensaje de de imágenes e texto texto de objetos y los recibidos nuevos mensajesrecibidos. Para ver los mensajes y perdidas notas para y llamadas la alarmas aparecen agenda, También costado al que está la tecla de desplazamiento use nuevos, canales y buscar canal el cambiar audio, el y desactivar activar Para cubierta. la de pantalla la en aparece información Esta nombre deestación, frecuencia e información de ubicación. el con preconfiguradas estaciones varias guardar Puede visualcontenido no aparece en la pantalla de la cubierta. Si está Visualusando Radio en el modo tapa cerrada, el volumen. el disminuir o aumentar y anterior o el sonido clip de próximo el reproducir pausa, en poner reproducir, de pista. Use las laterales teclas de desplazamiento para información e volumen de barras las aparecen sonido, de clip un escuchar para música de reproductor el Si usa aparecer. perfil el es no (si activo perfil del nombre el y estado de de indicadores hora, la batería,de información y carga la señal de de la intensidad los indicadores standby, la información de reloj y estado. En la pantalla del modo provee cubierta la de pantalla la cerrada, tapa de modo el En

del dispositivo. del

Normal ) pueden ) pueden • Mantenga pulsada la tecla del flash. La linterna se activa y y activa se linterna La flash. del tecla la pulsada Mantenga • linterna La veces. dos flash del tecla la rápidamente Pulse • linterna La vez. una flash del tecla la rápidamente Pulse • lo haga siguiente: que estáal costado Para usar el flash como una linterna, pulse la tecla del flash Para realizar llamadasel o usar menú, abra la tapa. 238. pág. la cubierta", de "Pantalla consulte configuraciones, las cambiar Para auricular. la en pulse contestar el para altecla dispositivo, conectado compatible auricular un tapa. Si tiene la abre cuando llamada seleccione cubierta, la de pantalla la de configuraciones las En nota. una y normal su tono con indican se entrantes llamadas Las hasta que transcurra el período el período hastade que trestranscurra minutos. la tecla o pulsada mantiene mientras encendida se queda tecla del flash. la a pulsar vuelva que o hasta minutos por 3 activase se activa por segundos. 1,5 Contes. si tapa abierta si tapa Contes.

del dispositivo. Para usar la linterna, la linterna, usar Para dispositivo. del para contestar una una contestar para Consulte "Cámara", pág. 151. pág. "Cámara", Consulte fotos. tomar y videos grabar puede de imagen, modo En a capturar. imagen la ver y puede activada es principal cámara La entonces el modo de imagen. y usted se activa hacia quede principal pantalla la que deabajo, modo hacia la tapa gire lado,de dispositivo el sujete grados, 90 a la tapa abre Cuando Modo imagen abra más. que tapa para la fuerce No la ilustración. en muestra se grados, como 160 unos abre tapa La completamente. tapa la ha abierto todavíase no cuando activa abierta se tapa El modo menú. el por Desplácese menú. al acceder puede y disponible está teclado el enciende, se principal la pantalla automáticamente: tapaabierta se activa modo la tapa, abre el Cuando Modo tapa abierta 139 Su Nokia N93 140 Su Nokia N93 del usuario para obtener más detalles sobre las funciones. las sobre detalles más obtener para del usuario dispositivo.secciones este manual Consulte las en pertinentes su máximo al aprovechar para directos los accesos Use directos Accesos llamadas Realizar • Activar fotos y • imágenes. su Ver • siguiente: lo hacer para ver elUse modo eje con la tapa cerrada, se de activa rotación ver. el modo del lateral parte la levanta y cerrada está tapa la Cuando Modo ver principal. pantalla la a junto paisaje estilo imagen para de selección teclas las y encender/apagar tecla la dispositivo), del lateral parte la en ubicadas (todas flash del tecla y la cámara modo del tecla la desplazamiento, de lateral tecla la zoom, tecla la capturar, tecla la usar Puede imagen. de modo en activo está no numérico teclado El ángulo óptimo de la cámara secundaria. cámara la de óptimo ángulo un para obtener la cámara de ángulo el Ajuste video. de llamada una durante vivo en video y enviar libres manos video de presentaciones. galería para ver de la películas osle"oosadyatv" á.235. pág. activo", standby "Modo consulte standby, modo el en disponibles directos accesos otros Para . Para iniciar una conexión a • pulsada mantenga voz, de comandos Para los usar • a acceder Para la lista de los marcados, números últimos • • Para alternar el perfil, pulse y seleccione un perfil. un seleccione y Para alternar entre • pulse perfil, el alternar Para • Para acceder a aplicacionesmultimedia, mantenga • red), (servicio de voz de buzón a su Para llamar • en captura de tecla la pulse cámara, la iniciar Para • Para alternar entre aplicaciones abiertas, mantenga • standby Modo usd .Cnut Sriis,pg 201. pág. . Consulte "Servicios", pulsada . pulse líneas. dos las entre alternará acción esta . Si telefónicas, dos líneas tiene pulsada pulsada . Consulte "Tecla propia", . pág. Consulte "Tecla 237. pulsada . pulsada mantenga imagen. de modo batería. la de útil vida la batería la y reduce de de energía la demanda aumenta plano segundo en funcionar aplicaciones las Dejar aplicación. una cerrar de antes no guardados datos los guarda El dispositivo poca Si tiene memoria,el dispositivo aplicación. una podría seleccione cerrar y algunasaplicaciones. pulsada Normal y Servicios Silencio , mantenga , mantenga , mantenga , mantenga un mensajede texto especial. como servicios de proveedor del configuraciones las recibir puede o de servicios proveedor su de configuraciones ya en instaladas su dispositivo Puede tener de servicios. proveedor de su la información en basado automáticamente, configuradas móvil Internet de configuraciones y streaming GPRS, MMS, con cuenta normalmente Nokia dispositivo Su Configuraciones Para seleccionar letraspalabras, y mantenga pulsada • mantenga lista, una en elementos múltiples marcar Para • desplácese lista, una en elemento un marcar Para • listas y texto Editar seleccione y seleccione , seleccione pulsada mantenga documento, un en el texto pulsada mantiene mientras texto al portapapeles, el copiarPara texto. usd ,meta us . Para finalizar . , luego o suelte selección, , mientraspulsa su vez. la a pulsada y pulse y mismo al . Al mismo tiempo, pulse o para destacar para o pulse tiempo, mismo Al . Pegar . Copiar . Para insertar insertar Para . 1 Transferir contenido automáticamente. activa se desconectado perfil tarjeta el SIM, sin una encendido Nokia está su dispositivo Cuando el SIM su dispositivo. en insertar tarjeta otro Puede teléfono. de modelo del Elinfrarrojos. tipo de copiar que puede contenido depende o Bluetooth conectividad la usando Nokia dispositivo su a compatible Nokia dispositivo un agenda, desde deentradas como copiar contactos y contenido, Puede 4 3 2 Pulse y seleccione seleccione y Pulse con conectividad Bluetooth, seleccione seleccione Bluetooth, conectividad con dispositivos de búsqueda haga una Nokia dispositivo su que para Bluetooth, conectividad la selecciona Si seleccionado. conexión de tipo el admitir deben dispositivos Ambos datos. transferir para infrarrojos o Bluetooth conectividad la usar desea si Seleccione seleccione información, de vista la En código (decódigo uno a dieciséis dígitos) y seleccione un Ingrese Nokia. dispositivo su en código un ingrese la que lede pide ellista. dispositivo Se otro Seleccione osle"iclrdsoiio" á.218. pág. dispositivos", "Vincular Consulte Aceptar el mismoIngrese código en el otro dispositivo y seleccione otro dispositivo otro desde contenido Transferir . Ahora los dispositivos están vinculados. vinculados. están los dispositivos . Ahora Herram. > Transferen. Continuar Continuar

Aceptar . . . 141 Su Nokia N93 142 Su Nokia N93 Indicadores esenciales Indicadores anterior, anterior, la en vista principal, seleccione transferencia una de información de registro el ver Para cancelar el proceso de copia y continuarlo en otro momento. de copia depende de la cantidad de datos a transferir. Puede Nokia y tarjeta de memoria (si hay una insertada). El tiempo a la ubicación de memoria correspondiente en su dispositivo memoria compatible (si hay una insertada) del otro dispositivo de y la tarjeta memoria la desde copia se contenido El 5 información, en la vista principal, seleccione seleccione principal, vista la en información, Para ver los dispositivos de los cuales ha copiado o transferido Para algunos modelos de teléfono, de teléfono, modelos algunos Para desea copiar del otro dispositivo. otro del copiar desea que el contenido Nokia, seleccione su dispositivo Desde 219. "Conexión deConsulte infrarrojos", pág. los dos dispositivos. infrarrojos, conecte Si selecciona pantalla. la en instrucciones las siga Transferen. instalar Para mensaje. un como dispositivo al otro Buzón entrada Buzón la carpeta en leídos no mensajes o más uno Tiene red). de (servicio UMTS red una en uso en está El dispositivo GSM. red una en uso en está El dispositivo en el otro dispositivo, abra el mensaje y mensaje el abra dispositivo, otro el en en Mensajes . Transferen. Regist. transf. Regist. Teléfonos se envía se envía .

Una dellamada datos está activa. dispositivo. al conectado compatible texto de teléfono un Hay dispositivo. al conectado compatible auditivo dispositivo un Hay Hay un auricular compatible conectadoal dispositivo. red). de (servicio en uso está telefónica línea La segunda Una alarma está activada. bloqueado. está del dispositivo El teclado carpeta carpeta Hay a mensajes la espera de ser enenviados la remoto. correo Ha e-mail en nuevo elrecibido buzón de e-mail Silencio si Aparece perdidas. llamadas Tiene íe s ypr asgna . segunda la y para es línea para la primera el indicador red), de (servicio telefónicas líneas dos tiene Si número. a otro desviadas serán dispositivo al llamadas las Todas están configurados como Buzón salida y Tono aviso mensaje aviso Tono Tipo de de timbre Tipo . está configurado como como configurado está , y Desactivado Tono de alerta alerta de Tono . Una conexión USB estáUna activa. conexión Bluetooth. conectividad la usando datos transmitiendo Se están activa. está Bluetooth conectividad La una redque notiene encriptación. Una conexióninalámbricade LAN está activa en una redque tiene encriptación. Una conexióninalámbricade LAN está activa en 243. inalámbrica", "LAN pág. y Consulte una LAN está inalámbrica disponible. Configuró el dispositivo para buscar LAN inalámbricas espera. en está de UMTS datos de paquete Una conexión de activa. UMTS está datos paquete de Una conexión disponible. está de UMTS datos de paquete Una conexión espera. en está o EDGE de GPRS datos de paquete Una conexión activa. está o EDGE de GPRS datos de paquete Una conexión disponible. está o EDGE de GPRS datos de paquete Una conexión sáeccad lú oio us . o pulse sonido, algún escuchando está o activa llamada una tiene cuando volumen del nivel el o disminuir Para aumentar y altavoz de volumen Control . la con desbloquear , Para luego • Para desbloquear con la tapa abierta, pulse . las Cuando teclas • , luego pulse bloquear, Para . • pulse bloqueado, la de la luz pa Para encender teclas. de pulsación accidental lapara teclado evitar del el bloqueo Use de teclas) (Bloqueo el Bloquear teclado programado en su dispositivo. su dispositivo. programado en efectuarse llamadas alemergencia númerode oficial pueden activado, está del teclado bloqueo el Cuando sá lqeds prc nla pantalla. aparece en están bloqueadas, pulsada la tecla del modo cámara. modo del la tecla pulsada perdido la perdido conexión. ha o se dispositivo al otro conectarse de tratando está dispositivo el destellando, está indicador el activa. Si está infrarrojos de conexión Una tapa cerrada, mantenga mantenga cerrada, tapa ntalla cuando el cuando el ntalla está teclado 143 Su Nokia N93 144 Su Nokia N93 Para cancelar una alarma, seleccione o peligro. interferencia causar pueda móvil del teléfono No seleccione llamadas. recibir y realizar Seleccione sile para llamadas. ellas desea activar pregunta dispositivo Si selecciona de alarma. tono el emitir a empieza y automáticamente enciende se éste apagado, Si en programada está para la hora la alarma el dispositivo seleccione alarma, Eliminar alarma seleccione minutos, cinco por alarma la . alarma, seleccione desactivar Para la aparece activada, está alarma aplicación la Seleccione teléfono Activar Para desactivar el altavoz, seleccione Opciones seleccione llamada, una durante altavoz el usar Para distancia sin tener que sostener el dispositivo cerca del oído. El altavoz integrado le permite hablar y escuchar una a corta volumen puede resultar muy alto. alto. muy resultar puede volumen ya el que el altavoz, utilizando esté oído cuando Advertencia: Reloj > No Activar altavoz Activar para apagar el o dispositivo . . Opciones No sostenga No sostenga el cerca dispositivo del Reloj . > .Para configurar una nueva Fijar alarma Fijar Parar Reloj Opciones Parar Pausa Sí o para detener o para detener cuando el uso uso el cuando Sí > , el dispositivo el dispositivo , . Cuando una si desea Opciones . >

> hora esté correcta y que corresponda a su zona horaria. zona su a corresponda y que correcta esté hora la que de Asegúrese seleccionada. a la ciudad acuerdo de en la vista principal del reloj y la hora en su dispositivo cambia seleccione Para configurar ciudadsu actual, desplácese a la ciudad y lista. la en ciudades ciudad Agregar laa lista, seleccione ciudades agregar Para las horas ver puede mundial, de reloj la . En vista ciudades. diferentes en pulse y a acceda mundial, reloj de vista la a acceder Para Reloj mundial seleccione Reloj del seleccione reloj, las configuraciones cambiar Para Configuraciones del reloj de red), seleccione red), seleccione de (servicio teléfono su en horaria zona y fecha hora, de la información actualice la red celular que permitir Para que aparece el reloj cambiar Para Para cambiar la hora o fecha, seleccione seleccione o fecha, hora la cambiar Para alarma reloj alarma seleccione el tono de alarma, cambiar Para automática Actualización > Opciones Opciones Tipo de reloj . . Podrá agregar un máximo de hasta quince quince hasta de un máximo agregar . Podrá > Hora operador de red Configuraciones > Mi ciudad actual ciudad Mi > Analógico .

en el modo standby, . o . La ciudad aparece . La ciudad Digital Hora > Opciones Tono de o . Fecha Reloj > .

ns dispositivo. su en su dispositivo a Internet y a dispositivos compatibles que que compatibles dispositivos a y a Internet dispositivo su inalámbrica). Con una LAN inalámbrica, puede conectar (LAN local de área inalámbrica red la admite dispositivo Su y apriételas. la ilustración en como correas las Pase el lente cubrir y para muñeca la para Correas Pop-Portconector compatible alpuerto un auricular Conecte Auricular

se muestra muestra se cuando pueda poner en peligro su seguridad. su peligro en poner pueda cuando auricular el utilice No afectada. verse puede capacidad para oír sonidos procedentes del exterior la auricular, el Si utiliza Advertencia: LAN inalámbrica LAN TM

• Métodos de encriptación equivalentes a privacidad a privacidad equivalentes encriptación de Métodos • GHz 2,4 de frecuencia una a Funcionamiento • Estándar 802,11b/g IEEE • LAN: funciones las siguientes admite Su dispositivo la batería. de útil la vida y reducen la batería otras funciones, aumentan la demanda de alimentación de utilizan se mientras plano segundo en funciones dichas de uso el permitir o inalámbrica LAN utilizan que funciones Las país. de su competentes las autoridades con consulte información, obtener Para móvil. LAN de al uso cuanto en restricciones hay Francia, en como lugares, Algunos inalámbrica.conectado la con LAN en y disponible la estar estar debe su ubicación dispositivo Parainalámbrica, usar LAN inalámbrica una LAN debe "Red pág. consulte doméstica", 146. doméstica, red una en dispositivo su de uso el sobre información más Para obtener inalámbrica. LAN tienen en la guía de Aplicaciones adicionales. Aplicaciones de guía la en inalámbrica” LAN de de acceso “Puntos Consulte Internet. a conectarse que necesitan las aplicaciones para acceso el de Use punto inalámbrica. LAN una (IAP) en Internet acceso de punto un crear debe inalámbrica, LAN usar Para inalámbricas Conexiones LAN pueden usar si usar red las la admite. pueden protegido Wi-Fi (WPA) y 802,1x. Estasfunciones sólo se alámbrica (WEP) con claves hastabits, de 128acceso 145 Su Nokia N93 146 Su Nokia N93 adicionales. Aplicaciones de guía la en WLAN” “Asistente consulte WLAN, asistente el sobre más información obtener Para usar una conexión de LAN inalámbrica. LAN de conexión una usar y al establecer aplicable seguridad de requisito cualquier con cumplir Recuerde disponible). está (si inalámbrica Cuando activa inalámbrica. LAN de conexión misma la usar pueden aplicaciones varias pero inalámbrica, LAN acceso de punto con dispositivo un a conectado estar puede Sólo activos. datos de paquete tiene cuando una llamada voz de durante usaro LAN Puede inalámbrica 224. pág conexiones", de "Administrador consulte conexión, la terminar Para inalámbrica terminacuando finalizaconexión la de datos. LAN inalámbrica.de una LAN La conexiónactivade a Internet acceso de punto un usando datos de conexión una Una conexión de LAN inalámbrica se inalámbrica establece conexión de LAN Una ingrese*#62209526# en el modostandby. dispositivo, su identifica que (MAC) Control Access Sugerencia: accesos no autorizados a sus datos. datos. sus a autorizados no accesos de riesgo el reduce encriptación de métodos de El depor su conexión LAN móvil. uso seguridad la para aumentar encriptación de disponibles uno de Siempre active los Importante: métodos Desconectado Para verificar la dirección exclusiva la dirección verificar Para , todavía puede usar LAN usar LAN , puede todavía

cuando crea crea cuando

Media de punto de acceso a de acceso punto de dispositivo un Con UPnP. con compatible es dispositivo Su doméstica Red osle"e rhvsmliei" á.222. pág. multimedia", archivos "Ver Consulte dom. Red usara comenzar puede a la red, conectados dispositivos los todos en necesarias configuraciones las completar Tras Nokia. dispositivo su con suministrado el DVD-ROM en Media Server se software que encuentra instalardeberá el PC compatible una conectar Para Nokia,dispositivo programe enlas configuraciones los dispositivos. configure luego doméstico, Internet a En su primero cree y configurede su punto acceso inalámbrico LAN inalámbrica, LAN su en doméstica una red configurar Para pág.doméstica", pág. imágenes", 220 e "Imprimir 171. dispositivo Nokia en un televisor compatible. Consulte "Red su en guardadas imágenes ver ejemplo, por conectados, imágenes en en imágenes e imprimir compatibles multimedia archivos reproducir o ver copiar, puede doméstica, red su configurar Tras compatible. multimedia de inalámbrico con un receptor equipado o televisor sonido sistema de sonidode o televisor sistema o un compatible, impresora compatible y un una PC compatible, una Nokia, dispositivo su como inalámbrica, LAN admiten que UPnP compatibles dispositivos red la a y conectar doméstica para compartir sus archivos multimedia. multimedia. archivos sus compartir para Galería en los otros dispositivos compatibles compatibles dispositivos los otros en

LAN inalámbrica puede crearuna red a la red doméstica, la PC, en Red dom. Red

También consulte "Punto de acceso Web", pág. 201. pág. Web", acceso de "Punto consulte También la página. una aparece activado, está Mapa Mini el Cuando . en desplaza se cuando completa de la página general vista pulse actual, la página para Mapa Mini el o desactivar activar Para y blogs. vínculos y leer justifica se texto el que modo de estrecha forma en texto solamente contienen que páginas normales, acercar y alejar en una página (Mini Mapa), ver Web páginas ver puede adicional, explorador este Con Pulse y le proporcionarán instrucciones sobre cómo usar sus servicios. proveedorseleccione de servicios. Los proveedores de servicios también Verifique la disponibilidad de servicios, precios y tarifas con su (HTML). hipertexto de marcado de o lenguaje (XHTML) hipertexto de de marcado extensible lenguaje (WML), inalámbrica de telefonía marcado de el lenguaje utilizan páginas Estas móviles. dispositivos para diseñadas específicamente páginas mantienen servicios de proveedores Muchos Explorador Web Explorador Internet > Web . 1 Insertar la tarjeta de memoria niños. los de del fuera alcance de memoria tarjetas las Mantenga en ella. almacenados datos alterar los de además dispositivo, y el tarjeta dañar la puede compatible no de memoria tarjeta una de uso El dispositivo. este con compatibles son no y memoria Tamaño Reducido, no caben en la ranura para la tarjeta de de MultiMedia tarjetas las como memoria, de tarjetas Otras compatibles. miniSD tarjetas con sólo dispositivo este Utilice memoria. de tarjeta la en dispositivo su en la información de de seguridad copia una hacer puede También dispositivo. paraadicional tener másmemoria en su almacenamiento de espacio como Puede una tarjeta usar miniSD compatible memoria de Tarjeta agujas del reloj. del agujas de las contrario sentido haciaábrala arriba en tarjeta de memoria, la para ranura la de la compuerta abrir Para 147 Su Nokia N93 148 Su Nokia N93 2 4 3 1 tarjetaRetirar de memoria la 4 3 2 Cuando aparezcaCuando confirmar que desea retirar la tarjeta. la retirar desea que confirmar seleccione encendido, está dispositivo Si el tarjeta memoria. de la Retire de para la liberarla ranura. de memoria la tarjeta Pulse memoria. de tarjeta 'Aceptar' ne ertrrl ajt,ple y seleccione tarjeta memoria Antes de retirarlatarjeta, pulse compuerta. la Cierre se ajuste se Escuchará un clic cuando la tarjeta la tarjeta. Empuje tarjeta esté hacia arriba. área de contacto en la el que de Asegúrese ranura. la en memoria Inserte la tarjeta de de alterar los datos almacenados en ella. en almacenados datos alterar los de además dispositivo, y el memoria de la tarjeta dañar puede operación una tarjetala de Retirar medio en a la tarjeta. al acceder operación una de medio Importante:

en su lugar. su en , abra la compuerta de la ranura para la la para ranura la de compuerta la abra , . Todas las aplicaciones se se cierran. aplicaciones las . Todas Retire la yRetire de memoria pulse tarjeta No retire la tarjeta de memoria en en memoria de tarjeta la retire No Aceptar se lecuando pida Retirar Format. tarj. tarj. mem. Format. Parauna formatear tarjeta de memoria, seleccione formatear la tarjeta de memoria antesdeusarla. otras necesitan formateo. Consulte con su proveedor si debe Algunas tarjetas vienen memoria de de formateadas fábrica y permanentemente. borrados son la tarjeta en datos los todos de memoria, tarjeta una se formatea Cuando memoria de tarjeta una Formatear a una tarjeta de memoria, seleccione dispositivo del memoria la de seguridad de copias hacer Para dispositivo. del memoria la en está que información la de seguridad copia de una y para hacer almacenamiento de adicional espacio como compatible miniSD tarjeta una Pulse y seleccione de tarj. seleccione dispositivo, del memoria la a memoria de tarjeta la desde información restaurar Para seg. mem. tel. tarjetas miniSD nuevas. miniSD tarjetas la todas formatear para Nokia dispositivo su use Sugerencia: ermet etread memoria de de tarjeta Herramienta Seleccione Seleccione Para obtener un óptimo rendimiento, rendimiento, óptimo un obtener Para Herram. > Sí Memoria paraconfirmar. Opciones Opciones . Puede usar usar . Puede > Opciones > Restaurar Restaurar Copia Copia > Opciones y para ) (si disponible). está pulse carpeta, a una archivos copiar o Para mover Pulse ). ver la de vista ( la de memoria tarjeta ( dispositivo del la memoria de vista búsqueda que coincida con el nombre del archivo. del nombre el con coincida que búsqueda texto de un ingrese e va a buscar, que la en memoria la seleccione archivo, un buscar Para pulse y fue insertada), (si memoria de tarjeta una en o dispositivo seleccione Para explorar los archivosy carpetas en la memoria del tarjetade memoria. la en datos nuevos y guardar borrar puede que modo de memoria, de tarjetas las adicional almacenamiento. de Se puede volver a escribir en Puede una tarjetausar miniSD como un espacio compatible información exista ya guardada enla memoria del dispositivo. de cuánta depende disponible memoria La datos. almacenar documentos y aplicaciones memoria para descargadas, usan la agenda, de notas timbre, de tonos videos, imágenes, mensajes, contactos, como dispositivo, del las funciones de Muchas al mismo tiempo para marcar un archivo y seleccione seleccione y archivo un marcar para tiempo al mismo Administrador de archivos Administrador > Mover a carpeta Mover Herram. o > Copiar a carpeta Copiar Adm. arch. Adm. Opciones Se abre la la abre Se > Buscar . y Mover a carpeta Mover tiene una. Marque los archivos que desea mover y seleccione si compatible, de memoria a tarjeta datos una transfiera en el dispositivo, disponible memoria más Para tener disponible. memoria poca tiene memoria de la tarjeta o el dispositivo si notifica le El dispositivo Memoria baja: memoria disponible Opciones seleccione datos, de tipos diferentes los consumen memoria y cuánta dispositivo el en tiene que datos de el tipo ver Para de memoria consumo el Ver • Mensajes de las carpetas de las carpetas Mensajes • lo siguiente: eliminar puede arch. Adm. use disponible, memoria más tener para datos borrar Para 172. pág. archivos", los de Galería compatible, por ejemplo, usando la opción de transferencia en PC una a multimedia archivos transferir puede También aparece en disponible Enviados . Consulteseguridad de copias "Hacer en su dispositivo y transferir y su dispositivo datos. en transferir memorias las diferentes ver para PC Suite Nokia en Sugerencia: > o la Por aplicación correspondiente. ejemplo, Detalles memoria en Mensajes > Tarjeta memoria Use Nokia Phone Browser disponible disponible Browser Phone Nokia Use Memoria libre Memoria Buzón entrada Buzón . La cantidad de memoria . y una carpeta. y una , Borrador y 149 Su Nokia N93 150 Su Nokia N93 buzón de entrada de Mensajería. del el mensaje elimine de mensaje, adjunto es un archivo .sis archivo Si el dispositivo. del memoria la de instalación de archivos los eliminar para archivos de administrador el use luego compatible, PC una en instalación de archivos sus de de seguridad copias para hacer PC Suite Nokia use memoria, suficiente mantener Para archivos. de otros grandes cantidades memoriade y evitar el almacenamiento usar pueden archivos Estos dispositivo. del la memoria en mantienen se (.sis) de instalación los archivos compatible, Cuando instale aplicaciones en una tarjeta de memoria necesita no ya que información otra Cualquier • consulte También descargadas. Aplicaciones • Notas de agenda • contacto de Información • guardados sonido de archivos o videos Imágenes, • Páginas Web guardadas • memoria la de recuperados e-mail de Mensajes • "Administrador de aplicaciones", pág. 249. aplicaciones", de "Administrador dispositivo del desea ver de ver los temas ayuda. desea seleccione seleccione y su dispositivo. Para acceder a la guía en el menú, pulse de funciones las de algunas sobre información da le guía La Herram. acceder Para a la principal, seleccione elayuda desde menú . pulsada mantenga la ayuda y la aplicación que estáabierta en segundo plano, para entre cambiar las instrucciones, leyendo está Cuando Ayuda Cuando una aplicación está abierta, seleccione temas. por clasificada ayuda con cuenta dispositivo Su para acceder a la ayudapara la vista actual. Ayuda Guía > Personal Ayuda . Seleccione la aplicación para para la cual aplicación la . Seleccione > Tutorial y la sección que desea ver. desea que sección y la Opciones > la conectividad Bluetooth. conectividad la o de e-mail usando adjunto un archivo como multimedia, mensaje un en y videoclips imágenes enviar Puede 153. pág. video", de "Configuraciones de .3gp archivo extensión (modos o formato de .mp4 la formato archivo de 3GPP archivo con el en graban se videoclips .jpg. Los imágenes producen la carpeta en automáticamente guardan se y videoclips imágenes Las diferente. verse puede materiales estos en de imagen La resolución principal. la cámara usando píxeles de 2048x1536 imagen de captura de una resolución admite N93 Nokia El dispositivo y paisaje. retrato de vistas las en video grabar y fotos tomar para cámara ambas utilizar Puede secundaria). cámara (la principal pantalla la de superior parte la en resolución baja de cámara una y principal) cámara (la dispositivo del lateral parte la en resolución alta de cámara una cámaras, dos tiene N93 Nokia Su Cámara Imágenes/video en Galería Compartir . Las cámaras cámaras Las . ). Consulte Consulte ). El visor de video muestra lo siguiente: muestra video de El visor dispositivo. del lateral la parte en zoom la tecla de digital), gire de zoom 20x 2 1 rojo de tono. El indicador un y suena grabaciónse ilumina, indicandoqueel videose está grabando. de grabar el icono Aparece grabación. la comenzar para de captura la tecla Pulse video modo cámara o seleccione en en seleccione o cámara modo del la tecla use imagen, modo en está Si la cámara imagen. al modo la pantalla gire laprincipal, cámara Para activar videos Grabar Para acercar o alejar el objetivo 157. pág. captura", de "Modos y 156 luz", pág. y color el ajustar configuraciones: las "Ajustar Consulte tareas. barra de por la desplácese imagen, modo en de video grabar luz y color un antes de ajustes hacer Para video en automáticamente guarda se videoclip El seleccione grabación, la continuar para Para hacer unapausa enla grabación, seleccionePausa; de captura. la tecla pulse momento, cualquier en la grabación detener Para para alternar a modo video. en Galería osle"aeí" á.151. pág. . Consulte "Galería", Opciones

(3x óptico continuo y hasta y hasta continuo óptico (3x > Cambiar a modo Continuar. Imágenes/

151 Cámara 152 Cámara • El tipo de archivo del videoclip (6). videoclip del archivo de tipo El • • El indicador de la calidad del video (5) muestra si la si (5) muestra video calidad del lade indicador El • ) y de indicadores Los ( della memoria dispositivo • La cantidad total de tiempo para la grabaciónde video (3). • desplazarse cual puede por tareas (2), la de barra La • de Indicadores • (alta) es video del calidad los videos. guardan (4) ) se donde muestran tarjeta de ( memoria el tiempo y muestra transcurrido el tiempo restante. curso del en video el indicador grabando, está Cuando aparecela durante grabación). no de tareas barra (la color de tono y blancos equilibrio de grabación, modo el grabar para seleccionar de antes usando. está quecaptura modo de el y video de luz de activada, modo estabilización audio activado, de silencio estado (1) para , Teléfono (normal) Opciones TV (alta) TV Salir o Compartir , TV (normal) TV . , Teléfono Para reproducir inmediatamente el videoclip que acaba • opciones en la barra de tareas: de alguna selecciones videoclip, un grabar Tras • Para grabar un videoclip nuevo, seleccione nuevo, videoclip un grabar Para • e-mail, multimedia, usando video un enviar Para • seleccione elguardar video, desea no Si • de grabar, seleccione mensaje multimedia. mensaje un en .mp4 archivo de formato el en guardados durante una llamadaactiva. No puede enviar videoclips disponible está no opción Esta 215. pág. Bluetooth", y "Conectividad 173 "Mensajería", pág. consulte o seleccione pulse infrarrojos, o Bluetooth conectividad indicadores del estado indicadores de video. Desactivar iconos o visor del los indicadores todos mostrar para Sugerencia: interrumpida por llamadas entrantes. llamadas por interrumpida no sea de video la grabación que de asegurarse Sugerencia: Enviar Seleccione Seleccione Active el perfil perfil el Active . Para obtener más información, información, más obtener Para . Reproducir para solamente mostrar los los mostrar solamente para Opciones Desconectado . > Activar iconos Eliminar

las siguientes siguientes las uv video Nuevo para .

. mensaje multimedia a un dispositivo compatible. dispositivo un a multimedia mensaje como fácilmente enviar puede se que modo de duración), de segundos 20 (aproximadamente KB 300 a limitado El del con videoclip grabado tamaño Compartir seleccione por MMS, videoclip el enviar Para .mp4. y el CIF formato de tiene (640x480) archivo que resolución video de calidad la seleccione compatible, PC o televisor un en video el ver Si desea (MMS)). multimedia mensajes enviar por para videoclip de limitado (tamaño (normal) teléfono), y PC compatible TV o un en reproducción TV (alta) Calidad de video sonido. grabar de audio Grabación Configuraciones seleccione principales, configuraciones las cambiar Para cambiar. a vuelva las que hasta igual quedan principales configuraciones las pero cámara, la configuraciónde regresana los predeterminados tras cerrar 156. Los ajustes color y luz", pág. el ajustar configuraciones: Para ajustar ajustar Para Configuración de video Hay dos tipos de configuraciones para la grabadora de video: video Configuraciones de , (la mejor calidad para uso a largo plazo y plazo largo a uso para calidad mejor (la Teléfono (alta) (resolución QCIF, formato de archivo .3gp). Configuración de video y de las siguientes opciones: las siguientes de y : configure la calidad del videoclip como como videoclip calidad del la configure : : seleccione : seleccione y las configuraciones principales. principales. configuraciones y las , Teléfono (normal) Desactivar , consulte "Ajustar las las , consulte "Ajustar Compartir Opciones si no desea o TV (alta) TV Compartir está está > TV ,

memoria (si está insertada). está (si memoria de o tarjeta dispositivo del memoria predeterminada: en uso Memoria zoom óptico mientras está grabando. el durante lente del movimiento por el producido mecánico Desactivar grabación durante óptico Zoom Reproducir tareas u (cámarade principal) la barra de Seleccione la grabación. detenga se que vez una pantalla la en muestre se grabado videoclip del imagen Mostrar videocapturad. disponibles. álbumes los de lista una grabado en un álbum en a álbum Agregar de la vibración cámara graba cuando video. la Estabilización de video modo cámara o seleccione o seleccione cámara modo de la tecla use video, modo en está cámara la Si imagen. al modo la pantalla gire laprincipal, cámara Para activar fotos Tomar imagen , para, alternar imagen. a modo . Seleccione . Seleccione (cámarasecundaria) ver para elvideoclip. : defina la memoria de almacenamiento almacenamiento de memoria la : defina : : optarpuede por guardar el videoclip Desactivar : seleccione : seleccione : seleccione si desea que la primera primera la que desea si seleccione : Galería Opciones . Seleccione Seleccione . : seleccione : seleccione para eliminar el ruido ruido el eliminar para Activar > Cambiar a modo Opciones parareducir Reproducir Sí Activar para abrir abrir para > o

153 Cámara 154 Cámara • Indicadores de de Indicadores • lo siguiente: El muestra visor de la cámara color. luz o zoom, configuraciones las más si cambia puede tardar latomada imagen Guardar 156. pág. luz", color y el ajustar configuraciones: las "Ajustar Consulte tareas. de la barra por desplácese imagen, modo en foto una tomar de antes y color luz de ajustes hacer Para la imagen. guarde se que de antes el dispositivo mueva capturar.No la tecla pulse principal, cámara en la foto, una Para tomar enfocar. sin foto la tomar puede También mitad. la hasta indicador rojo. Suelte la tecla capturar y vuelva a pulsarla aparece en la pantalla. Si no se enfocó el objeto, aparece el enfoque de verde indicador El principal). cámara (sólo mitad la hasta capturar tecla la pulse objeto, un en enfocarse Para modo de flash y el modo de captura que está usando. está que de captura el modo y flash de modo Desactivar Activar (),Automático temporizador; activar el secuencia, de modo activar el estado (1) para () o ()

Activar Cancelar • La La calidad de una con zoom digitalimagen es más baja • la cámara. mueva no se para que manos ambas Use • lo siguiente: tenga en cuenta foto, una tomar Al y ) ( dispositivo del la memoria de indicadores Los • estimado el número (4) muestra de imagen El contador • resolución de indicador El • desplazarse puede cual el por (2), tareas de barra La • (resolución 2048x1536), 2048x1536), (resolución es imagen la de calidad que la de una imagen sin zoom digital. zoom sin imagen una la de que imágenes. las guardan ) se donde (5) muestran detarjeta ( memoria contadorapareceno al enfocar o capturar imágenes). (el uso en memoria y la imagen de calidad de actual la configuración capturar usando puede que de imágenes 640x480). (resolución o 1280x960) (resolución 1600x1200), (resolución imagen). de captura y de enfoque de modos los durante no aparece tareasbarra (la de color de tono y exposición valor blancos, equilibrio captura, de deantes capturar la imagen para seleccionar el modo Sugerencia: los indicadores del estado de la cámara. la de estado del indicadores los visor o iconos Desactivar iconos todos mostrar para dellos indicadores Seleccione Seleccione Imprimir 3M - Grande Imprimir 2M - Media Imprimir 2M Imprimir 1.3M - Peq. MMS 0.3M MMS de imagen (3) indica si indica la (3) de imagen para solamente para mostrar Opciones

> Activar Activar

fijas: Hay dos tipos de configuraciones para la cámara de imágenes fija imagen para cámara de Configuraciones e-mail, multimedia, usando video un enviar Para • seleccione imagen, guardar desea la no Si • tareas: de la barra en opciones siguientes las de seleccione foto, la tomar de Después batería cuando de ahorro de modo cambia al cámara La • opciones: Opciones seleccione principales, configuraciones las cambiar Para principales nuevo. de cambie quedan las que igualhasta después de cerrar la cámara, pero las configuraciones ajustes de configuración regresan a los predeterminados 156. Los luz", pág. y color el ajustar configuraciones: Para ajustar Para capturarunanueva imagen, seleccione • • Para imprimir la foto, seleccione seleccione foto, la imprimir Para • conectividad Bluetooth o infrarrojos, pulse o seleccione pulse infrarrojos, o Bluetooth conectividad . pulse fotos, tomando seguir Para las teclas. pulsan no se uv imagen Nueva osle"mrmriáee" á.171. pág. imágenes", "Imprimir Consulte Configuración imagen > Configuración imagen Configuraciones Enviar . . y las configuraciones principales. y alguna de las siguientes de las siguientes alguna y , consulte "Ajustar las las , consulte "Ajustar Imprimir . Eliminar . al tomar una foto. una al tomar de obturador Tono Cancelación parpadeo seleccione seleccionada, de imagen la calidad para mantener el zoom limitar desea Si extendido. y digital digital de paso punto elen pausa una (en Activar pausa) o continuos suaves y sean digital extendido zoom digital y el (continuo) extendido Zoom inmediatamente. fotos tomando seguir o capturarla de después la imagen captur. imagen Mostrar disponibles. álbumes de Si selecciona Galería. en un álbum en a álbum Agregar principal. cámara la para disponibles están sólo resoluciones Estas por MMS, seleccione la imagen seleccione e-mail, por M- Media 2M seleccione imagen, la imprimir desea Si consume. memoria más imagen, la 0.3M Peq. - 1.3M Imprimir 2048x1536), imagen de Calidad (resolución 640x480). Cuanto mejor es la calidad de de calidad la es mejor Cuanto 640x480). (resolución quepara de los incrementos elzoom entre zoom Imprimir 2M Media - 2M Imprimir o Imprimir 1.3M - Peq. - 1.3M Imprimir (sólo cámara (sólo cámara principal): seleccione : seleccione si desea guardar la imagen la imagen guardar si desea : seleccione para que los incrementos para que delos incrementos zoom hagan : seleccione el tono que desee escuchar escuchar desee que el tono seleccione : : Imprimir 3M - Grande Imprimir 3M - Grande (resolución 1280x960) o 1280x960) (resolución Imprimir 1.3M - Peq. - 1.3M Imprimir : seleccione seleccione : Desactivar : seleccione : seleccione MMS 0.3M MMS (resolución 1600x1200), 1600x1200), (resolución . Desactivar 50Hz Activar Si desea enviarla Si desea Sí , se abre una lista lista una abre , se o , 60Hz . Imprimir Imprimir (resolución si desea ver ver si desea Para enviar si desea si desea MMS MMS . Activar Activar 155 Cámara 156 Cámara Tambiénelusar temporizador puede el modo de en secuencia. seleccionado. espera de tiempo el al finalizar foto la ) destella, emite y elun dispositivo toma progreso. La cámara en está tiempo el bip cuando del ( temporizador Para activar el temporizador, seleccione Temporizador seleccione temporizador, del de espera la foto. en Para el programar de con el incluirse tiempo fin Use el para retrasar la de unatemporizador imagen captura El temporizador sólo está disponible en la cámara principal. temporizador foto: la Usted en capturar. tecla la Para alregresar óptico de secuencia, visor pulse de modo el temporizador. con de secuencia modo el usar puede También para abrirla. en la pantalla. Para ver una foto, pulse cuadrícula en una aparecen éstas fotos, las de tomar Después capturar. tecla la pulse fotos, las tomar Para seleccione disponible), memoria hay (si suficiente en secuencia fotos seis hasta tome que para la cámara configurar Para secuencia de Modo Tomar fotos en secuencia imágenes. sus Memoria en uso Opciones > 2 segundos : seleccione dónde : dónde seleccione desea guardar sólo está disponible en la cámara principal. cámara la disponible en sólo está > Modo de secuencia de Modo , 10 segundos Activar Opciones o . 20 segundos . El indicador . > . colores con más precisión. más con colores lareproduzca que cámara actual. Esto hace iluminación de blancos de Equilibrio el según ajustadas detipo entorno. fueron cuales las de luz configuraciones propias sus usa captura de Cada modo fotos. toma cual el en entorno el Modo de disparo opciones: siguientes las de y seleccione tareas barra de por la desplácese o más precisión agregarpara con efectos o a sus fotos videos, y luz colores los reproduzca que para cámara la activar Para color y luz el Ajustar las configuraciones: ajustar flash. del tecla la pulse flash, modos los entre alternar Para Automático disponibles: flash están modos Los siguientes iluminación. baja de condiciones para LED flash un tiene cámara La fotos. tomando esté cuando el flash No cubra cerca. muy desde o animales personas de fotos tomar para flash el Mantenga una distancia segura cuando use el flash. No use principal. en la cámara disponible sólo está flash El Flash tome fotos. tome 2 segundos Sugerencia: (), : seleccione : seleccione modo de capturaun para para mantener las para mantener manos fijas cuando Activar Seleccione : seleccione de la lista la condición condición la lista la de seleccione : () y Opciones Desactivar > Temporizador (). > un estilo o entorno. o estilo un de cada modo de captura han sido programadas de acuerdo a videoclipslistade la dede captura. modos Las configuraciones grabar o tomar fotos para indicado captura de modo el apropiadosde color para y luzentorno el actual. Seleccione captura modo deUn le ayudaa encontrar los ajustes Modos de captura modos. los dos entre alternar al retienen y se video y imagen modos los para disponibles independientes configuraciones Hay principal. a la cámara aplican sólo de configuración ajustes Los seleccionada. cámara la de varían dependiendo disponibles Las configuraciones o videos. imágenes las a afectan cambios los cómo ver y puede ajuste que configuración a cualquier adaptarse para cambia La pantalla color Tono de la cámara. de exposición de exposición de Valor : seleccione un efecto de color de la lista. la de color de efecto un seleccione : (sólo imágenes): ajuste el tiempo el ajuste imágenes): (sólo en particular, seleccione seleccione particular, en Para su propiocrear modo de captura para entorno un es predeterminado captura de modo el fotos, toma Cuando imagen: o video captura de de modos los de seleccione y tareas de la barra por Desplácese principal. cámara Los de captura para modos disponibles sólo están la captura deseado. captura seleccione captura, de modo otro de configuraciones las copiar Para y color. iluminación de configuraciones diferentes ajustar puede usuario el por definido captura de el modo En Automática aaoe ood disparo de modo en Basado . Usuario > Opciones y el modo de > Cambiar . 157 Cámara 158 Galería Repr. mús. Repr. . Los abren en videos RealPlayer Para abrir un archivo, pulse 163. pág. "Álbumes", marcary agregar elementos a álbumes. Consulte y álbumes crear puede También, 209. pág. "RealPlayer", abren y reproducen con la aplicación RealPlayer. Consulte se de streaming enlaces y .ram archivos videoclips, Los arch. Seleccione Seleccione Cámara y seleccione compatibles a travésLAN de inalámbrica, pulse UPnP dispositivos otros con archivos sus compartir o de streaming enlaces y reproducción de listas sonido, de clips videoclips, imágenes, sus y organizar guardar Para sádisponible. está aplicación , Enlac. streaming o Ir a Cámara a Ir la tecla del modo de cámara o seleccione la del o seleccione tecla de modo cámara la carpeta carpeta la Sugerencia: , seleccione , seleccione Galería Consulte "Ver imágenes y videoclips", pág. 159. 159. pág. Consulte "Ver imágenes y videoclips", Galería Cámara y los archivos de música y clips de sonido en en sonido de y clips música de archivos los y Imágenes/video Red domést. Red Imágenes/video . Para abrir la galería desde la aplicación aplicación la desde galería la abrir . Para , sólo la carpeta carpeta la , sólo . Opciones Para cambiar de , Presentaciones , yple para abrirla. pulse y > Pistas Ir a Galería a Ir , pulse la tecla Capturar o Capturar la tecla pulse , Imágenes/video Galería , , Clips de sonido de Clips a la cámara, en en cámara, la a . Desde la Opciones Todos los los Todos

>

dispositivo, seleccione un archivo y archivo un seleccione dispositivo, del o a la insertada) memoria una hay (si compatible copiarParao moverarchivos a una tarjeta de memoria tarjeta mem. copiar descarg. imág. seleccione un archivo y y archivo un seleccione o ubicaciones dedispositivos, copiado elementos otras haber Para aumentar el espacio disponible en la memoria después de seleccione a 640x480, imagen una de resolución Opciones seleccione a PC una como compatible, ubicaciones, otras a ya copió que archivos los de tamaño el reducir Para . guardados archivos Los . la en tarjeta de son indicados por memoria por indicados son insertada) Los archivos guardados en la tarjeta de memoria (si hay una mem. teléf. Para descargar archivos en en archivos descargar Para 172. pág. archivos", los de libre Memoria sitio puede descargar. sitio puede el cual del favorito un podrá seleccionar y explorador el principales usando el explorador, seleccione . Seleccione . Seleccione > Transferen./memoria Seleccione Seleccione . Consulte "Hacer copias de seguridad copias "Hacer .de Consulte seguridad , Descarg. pistas Descarg. Copiar a tarjeta mem. a tarjeta Copiar Opciones Copiar a mem. teléf. mem. a Copiar Galería o > > Descargas son. Transferen./memoria en una de las carpetas carpetas las de una en Reducir Opciones o descar. videos . Para reducir la la reducir . Para Mover a Mover > o Mover y Mover a Mover Reducir Se abre abre Se > . , en a relacionadas opciones Las 145. inalámbrica", pág. aplicación la configurar Editar seleccione foto, una o videoclip un editar Para hacia arriba o abajo. desplácese en o derecha. Para grupos, explorar los archivos la izquierda a desplácese uno, a uno archivos los explorar Para pantalla. la en aparece archivos de cantidad La por fecha. ordenados y cíclico orden en están videoclips y Abra insertada). una hay (si compatible memoria de tarjeta una en o dispositivo delguardarlo debe la memoria en multimedia, reproductor el en o la galería en recibido o videoclip imagen Para ver infrarrojos. una o usando Bluetooth conectividad la de través a de e-mail, adjunto archivo un como multimedia, un mensaje en y videoclips imágenes enviarle programadas. estén guardan en en guardan y videoclips tomadas fotos Las y Ver imágenes videoclips accesoinalámbrico LAN a Internet doméstico crear de deberá su punto y configurar inalámbrica, primero la LAN a través de compatibles UPnP dispositivos otros con en guardados multimedia archivos compartir Para Galería Imágenes/video . Se abre editor deun o imágenes editor de video. hasta que las configuraciones para Imágenes/video en en Red domést. Red Galería Red domést.Red en en grabados con la cámara se la cámara se grabados con Galería . Los archivos de imágenes . de imágenes Los archivos Consulte "LAN "LAN Consulte no están disponibles . También pueden pueden . También Red domést.

y luego y luego Opciones Galería >

seleccione seleccione Galería, en un álbum a videoclip o imagen una agregar Para 161. imágenes", pág. "Editar Consulte 160. pág. Consulte "Editar videoclips", o varios clips en galería y galería y en clips o varios videoclip un seleccione personalizados, videoclips crear Para 163. pág. "Álbumes", Consulte insertada) para la impresión, seleccione una (si hay memoria tarjeta de su en guardarlas o para compatible, impresora una en imágenes sus imprimir Para 160. pág. "Editar videoclips", imágenes (servicio de red) de su proveedor de servicio, pulse pulse servicio, de proveedor su de de red) (servicio imágenes de al servicio carga de multimedia un mensaje Para enviar 171. pág. imágenes", "Imprimir Consulte aaeiia n mgnovdolp us . pulse o videoclip, imagen una eliminar Para y foto la seleccione fondo, de imagen una como la imagen usar Para permanentemente. almacena se no o alejamiento acercamiento de porcentaje El pantalla. la de superior parte la en aparece o alejamiento acercamiento de porcentaje seleccione . lase acercarabre para o alejarCuando imagen, una imagen, y pulse imagen una a desplácese imagen, la ver Para información. más obtener para servicios de proveedor su con y seleccione seleccione y Opciones Opciones Acercar Cargar > > > Asignar Opciones Álbumes (si está disponible).Comuníquese Opciones > > Como imagen fondo imagen Como > Acercar Agregar a álbum Agregar > Opciones Editar o . Consulte Consulte . Alejar > Imprimir . El . . .

159 Galería 160 Galería Editar videoclips Editar uno o más videoclips y seleccione y seleccione videoclips o más uno seleccione y marque personalizados, videoclips crear Para transiciones y texto imagen, sonido, Editar video, en editarPara videoclips iuetsopciones: siguientes las de alguna seleccione el video, modificar Para abajo. o hacia arriba desplácese tiempo, de líneas las alternarPara entre videoclip. tiempo del latransiciones de agregadas aparecen en línea al videoclip y texto imágenes, Las sonido. de del clip y videoclip del la tiempo: de líneas dos ver puede video, de editor el En muvee Crear quedesea crear un muvee y seleccione los con imágenes e videoclips los Seleccione personalizados. usar puede También videoclips. los o entre video del final y principio al Las transiciones son efectos visuales que se pueden agregar efectos. y transiciones, sonido, de clips imágenes, agregue y videoclips los y corte combine personalizados, videoclips Opciones y seleccione videoclip a un desplácese personalizados, > Editar . Consulte "Director de películas", pág. 212. películas", . Consulte de "Director . Consulte "Galería", pág. 158. Paracrear 158. . Consulte pág. "Galería", Direc. pel. Galería para crear videoclips videoclips crear para y crear videoclips videoclips y crear Opciones Opciones > Editar > Editar . > Cortar video, seleccione seleccione video, Cortar vista lavideoclip, en de un instantánea una foto tomar Para multimedia. un mensaje en apropiado enviada para ser a un tamaño la película cortar completa en miniatura, o guardar o enviar la películao Película En la vista previa de miniatura, pulse y seleccione y seleccione Tomar instantánea pulse de miniatura, previa vista la En sonido Insertar activa. está video del transición la primera cuando de inicio transición una seleccionar Puede videoclips. entre transiciones y video un de al final video, un de principio Editar transición el o duplique clip. o elimine duración su ajuste sonido, el clip de o mueva corte sonido): sonido clip Editar pantalla y configurefondo un colorde o efecto la paraimagen. la en duración su defina imagen, una o duplique elimine Editar imagen duración en la pantalla y agregue efectos al texto. su defina texto, del estilo y color el cambie texto, duplique o Editar texto el clip. o elimine duplique sonido, o mueva, silencie active lenta, Editar videoclip o : paratener una vista previade la película en pantalla : seleccione : seleccione Nuevo clip de sonido de clip Nuevo (sólo aparece si agregó texto): mueva, elimine (sólo aparece si agregó una mueva, una aparece imagen): agregó si (sólo : corte, agregue efecto de color, use cámara : hay tres tipos de transiciones: al transiciones: de tipos tres : hay (sólo aparece si agregó un clip de clip un agregó (sólo aparece si . Videoclip Opciones , Imagen . > Tomar instantánea , Texto , Clip de de Clip . tamaño máximo del mensaje multimedia que puede enviar. enviar. que puede multimedia del mensaje máximo tamaño el sobre detalles obtener para servicios de proveedor su con Vía e-mail seleccione video, el enviar Para uso en predet Opciones ya imágenes que guardadas están en las o tomarlas de después las imágenes editar Para imágenes Editar En dispositivo. del memoria la es Opciones Guardar Para su video, guardar seleccione Configuraciones , . tarjeta de memoria compatible. de lector un usando o Bluetooth conectividad susvideoscompatible a una PC usando la transferir puede También 217. datos", pág. "Enviar Consulte Bluetooth. inalámbrica la tecnología clip usando elenviar puede de servicios, proveedor su por permitido máximo tamaño el sobrepasa Sugerencia: Nombre capt. predet. capt. Nombre . Para definir . Para > > , Vía Bluetooth Vía Editar Configuraciones . , también puede también , Si desea enviar un videoclip que que videoclip un enviar Si desea Memoria en uso o Vía infrarrojos Vía . La predeterminada predeterminada . La , Resolución Enviar Opciones

definir Galería , seleccione seleccione , > Vía multimedia Vía Nombre video . Comuníquese . Comuníquese y > , seleccione , seleccione Memoria Película > , Seleccione Seleccione Para cortar una imagen, seleccione seleccione imagen, una cortar Para imagen. la a marco o prediseñada imagen una textos, efectos, añadir y y resolución, contraste el brillo, color, ajustar la imagen, a cortar y seleccione seleccione y cortar a área un seleccionar para desplazamiento de tecla la Mueva imagen. la de izquierda superior esquina la en cruz una aparece efecto Para reducir el efecto reducir Para . pulse a el cortar, que va área seleccionar el Para mover . deárea la la foto, dentro Para use tecla de desplazamiento. pulse seleccionada, área el Para fijar desplazamiento. tamaño del área resaltada, use la tecla de el cambiar va a cortar.Para que área del izquierda superior esquina la seleccione predefinida, proporción una Si seleccionó recortada. imagen la representa que rectángulo un forman seleccionadas áreas de la predefinido lista. proporción Si selecciona seleccione imagen, la Opciones seleccione seleccionada, área primera la ajustar área a cortar. elde Para nuevo Seleccionederecha. inferior oo oo us . pulse rojo, color de efecto el reducir Para desplazamiento. tecla de la use pantalla. la en aparece bucle Un . ojo, del tamaño el en quepa para que bucle el Para ajustar pulse ojo y al cruz la > Cortar > Opciones Aplicar efecto . Para cortar manualmente el tamaño de el tamaño manualmente cortar Para . Definir

de ojos rojos > Manual Aplicar efecto . Otra cruz aparece en la esquina esquina la en aparece cruz Otra . > Reducción ojos rojos ojos Reducción o seleccione un tamaño de tamaño un o seleccione

en una imagen, seleccione seleccione imagen, una en Opciones para cortar y girar girar y cortar para > Atrás Manual Aplicar . Mueva . Mueva . Las . Las , 161 Galería 162 Galería Para explorar las imágenes, pulse (anterior) o (anterior) pulse las imágenes, explorarPara • • • • opciones: siguientes las de alguna Seleccione seleccionado. archivo el con comienza diapositivas de presentación La completa. pantalla de modo el en imágenes e videoclips los ver Seleccione diapositivas de Presentación , , . pulse zoom, con imagen una por Para moverse o • Para acercaro alejar, pulse • contrario sentido o en sentido en imagen una Para girar • . pulse completa, pantalla la en imagen una ver Para • directos en el Accesos deeditor imagen: (próxima). Terminar pausa una hecho había se si Continuar diapositivas. de Detener un videoclip seleccionado reproducir Reproducir . o pulse reloj, del agujas las de . de nuevo pulse normal, la vista aPara regresar o . o Opciones : : para pausa una hacer laen presentación : para cerrar la presentación de diapositivas de la presentación para cerrar : la continuar para presentación de diapositivas, : para abrir la aplicación RealPlayer y RealPlayer aplicación la abrir para : > Presentación diapo. Presentación > Iniciar para seleccione seleccione diapositivas, de a la presentación agregar sonido Para diapos. entre Presentación diapo. seleccione de la presentación, comenzar antes diapositivas, de de la presentación ajustar el intervalo Para • Configuraciones pantalla completa del televisor. televisor. del completa pantalla la en aparece imagen la zoom, tiene no imagen la Cuando opción la el televisor, ve en la laabre una vistade miniatura imagen en Cuando mientras dispositivo. su de pantalla la en aparece lo que muestra video de la con lacarpeta excepción aplicaciones, las todas Para compatible. televisor un de video de de entrada al conector compatible Nokia de conectividad cable un Conecte compatible. televisor un de pantalla la en dispositivo su en guardados imágenes e videos ver Puede de de salida TV Modo • rsnaind ipstvs us . o de diapositivas, pulse presentación una durante volumen el disminuir o aumentar Para Música Pista en : seleccione un archivo de música de la lista. de la música de archivo un seleccione : Galería : seleccione : seleccione Opciones y y alguna de las siguientes opciones: siguientes las de alguna y RealPlayer > > Activada Presentación diapo. Presentación Configuraciones , la pantalla del televisor del televisor , pantalla la Acercar o Desactivada no está disponible. disponible. no está > Retardo Retardo > Imágenes/ Opciones . > Para ver archivos .svg, seleccione la carpeta carpeta la seleccione .svg, archivos ver Para y de pantalla resoluciones. tamaños con diferentes ven se o imprimen se cuando su apariencia mantienen imágenes Estas mapas. y animaciones como escalables), vector de (gráficos .svg archivos ver puede presentaciones, las Con Presentaciones 248. pág. televisor", de "Configuración Consulte aplicables. aspecto de relación y la televisor del sistema el para configurados estar deberán de televisor de salida ajustes Los costumbre. de como dispositivo del micrófono el usar cable Nokia Video-Out está conectado al dispositivo.Puede de y tonos las de pasa timbre teclas, cuando al televisor el Todo el sonido, incluso el sonido estéreo de videoclips, tonos pág. 209. "RealPlayer", Consulte televisor. y del dispositivo la pantalla del en videoclip el a reproducir resaltado, videoclip un abre Cuando seleccionada. música la reproduce se mientras televisor del completa pantalla la en aparecen marcados imágenes e en o un álbum diapositivas. Todos los videos los elementos de una presentación como e imágenes videos ver los Puede pulse pulse . pantalla y completa pantalla entre alternar Para alejarse, pulse Para . pulse Para acercarse, desplácese a una imagen y seleccione * . Opciones RealPlayer Presentaciones > Reproducir comienza comienza

normal, normal, , . Para eliminar un archivo de un álbum, pulse . El archivo archivo El . no se borra de la carpeta pulse álbum, un de archivo un eliminar Para . y videoclip pulse Seleccione el álbum al cual desea agregar una imagen o Álbumes o videoclip y seleccione adesplácese imagen una Galería, en un álbum a videoclip o imagen una agregar Para álbumes Ver Sólo puede imprimir imágenes en el formato .jpeg. formato el en imágenes imprimir puede Sólo admiten que impresión de servicios de proveedores los de archivos los obtener Puede impresión. de tener instalada como mínimo una configuración de servicio debe y línea en imprimir para servicios de proveedor un Para usar servicios. de proveedor del dependen disponibles Los productos pads. mouse o tazones como seleccionada, imagen la con productos diferentes de pedidos y hacer línea en imágenes imprimir aplicación la Con en línea Imprimir carpeta la en álbumes, de lista la ver Para videoclips. y imágenes sus convenientemente administrar puede álbumes Con los Álbumes Imág. & video Imág. > Print online Agregarálbum a . Print online , debe estar suscrito al servicio con servicio al suscrito estar debe , , seleccione , seleccione Imágenes/video . Se una listaabre álbumes.de (Imprimir en línea) puede puede línea) en (Imprimir Opciones Print online Print en > Galería Opciones Álbumes . . > > 163 Galería 164 Galería 4 1 3 2 seleccionada. En En seleccionada. la paravista la deorden producto, para la imagen copias de la cantidad y producto producto orden Cambiar ahora Ordenar imágenes. las ver para abajoarriba o hacia Desplácese imagen. de solicitud previa Vista Seleccione en seleccionó que imágenes las y muestra de imágenes previa vista la se abre servicios, de proveedor del al servidor conectado está Cuando delestado pedido. y total cantidad servicios, de proveedor del nombre el Registro configuración. de archivo un mínimo como instale que hasta disponible lalista, opción la de servicios de proveedor último al Si elimina lista. Eliminar Abrir y seleccione y imágenes o más imagen una Seleccione Pulse Seleccione la lista. de servicios de proveedor un Seleccione Imprimir : para iniciar una conexión al proveedor de servicios de al proveedor conexión una iniciar para : : para ver los detalles de los pedidos anteriores: anteriores: pedidos los de detalles los ver para : : para eliminar al proveedor de servicios de la la de servicios de proveedor al eliminar para : > Opciones Opciones Ordenar impresiones : para ver la imagen antes de hacer la la hacer de antes imagen la ver : para : para efectuar la solicitud la efectuar para : Ordenar impresiones Ordenar y alguna de las siguientes opciones: y alguna de las siguientes opciones: Galería : para ajustar los detalles del del los detalles ajustar para : > Galería Imágenes/video . no estará estará no . Opciones . > Compartir en línea Con la aplicación aplicación la Con continuar enotro momentoy ver contenido el delos álbumes. contenido,guardar contenido sin finalizar como unborrador y cargar Puede la Web. en contenido compartir para servicios y en en línea, álbumes imágenes videos blogs y en otros enviada con éxito aparece compra, de solicitud la se envía Cuando Registro solicitud decompra imagen Eliminar solicitud decompra imagen Agregar desde decontactos. clientes información la copiar Puede de compra. y solicitud cliente Cambiar info. de cliente de info. Cambiar solicitud decompra. los detalles de imagen de las otras imágenes las otras de de imagen detalles los y cambiar para ver o derecha a izquierda la Desplácese del proveedor de servicios. dependiendo varían disponibles y productos Las opciones comprar. seleccionar el puede y elproducto tipo que desea variar según su país o área de ventas. de o área país su según variar Nota: : para ver los detalles de solicitudes anteriores. de solicitudes los : ver detalles para La disponibilidad de este servicio puede puede servicio de este disponibilidad La Compar. en línea en Compar. : para agregar más imágenes a la la a imágenes más agregar para : : para eliminar las imágenes de la la de imágenes las eliminar para : . : para cambiar la información de de la información : para cambiar , puede compartir sus sus compartir puede ,

en la la en Orden www.latinoamerica.nokia.com/mitelefono Para usar Inicio contenido. otro y timbre) de tonos (incluso música imágenes, de desvío o transferencia modificación, la copia, impedir pueden copyright de Las protecciones servicio. de proveedor del variar dependiendo puede admitido contenido de Los tipos aacmatrcneioe íe" á.166. línea", pág. en contenido para compartir aplicación en en momento otro configuraciones las a acceder Puede contraseña. y usuario Compar. en línea vez primera en accede aplicación por la al servicio Cuando Latinoamérica). (para www.nokiausa.com/support consulte compatibles, servicios de los proveedores sobre información más al Para obtener servicio. suscripción sobre la detalles más obtener para servicios de proveedor su con Comuníquese de servicios. dela página Web su proveedor en al servicio suscribirse Por puede lo general Internet. en imágenes compartir para de servicios proveedor un con Compar. en línea en Compar. Compar. en línea , se le solicita que ingrese el nombre de el nombre ,que se le solicita ingrese Opciones , debe suscribirse al servicio servicio al suscribirse debe , (aaEE.UU.) y (para . Consulte "Configuraciones . Consulte "Configuraciones > Configuraciones

en la que desea cargar y desea que y seleccione Pulse Cargar archivos una PC compatible, seleccione seleccione PC compatible, una en Web explorador través a de servicios de configuraciones o cuenta una modificó si o desconectado modo el en nueva cuenta una Si creó servicios. de lista la en cuenta) (Crear cuenta nueva para un servicio, seleccione a la aplicación acceder Puede Se abrela vista de laprincipal. cámara desde seleccione seleccione Guardar como borrador seleccione un borrador, como creado contenido el guardar cargarWeb y procesoParael para cancelar a nuevos. archivos o agregar archivos abrir y ver los archivos, reorganizarlos, agregar texto a los Puede edición. la para el estado en aparecen seleccionados videos y imágenes las servicio, el selecciona Cuando Para seleccionar un servicio, pulse la tecla de desplazamiento. servicios seleccione seleccione Para conectarse al servicio cargar y los archivos a Web, o el con icono deel servicio texto para actualizarlista la de servicios en su dispositivo. Cancelar Opciones Selec. servicio Selec. Opciones > > Galería Guardar como borrador Cargar . Si el proceso de carga ya comenzó, comenzó, ya carga de proceso el . Si > > Imágenes/video Compar. en línea en Compar. ople . o pulse Opciones Enviar Opciones . Para crear una cuenta cuenta una crear Para . > > Carga de Web de Carga > Create account Agregar nueva Recuperar , los archivos archivos , los . también Atrás > .

165 Galería 166 Galería seleccione seleccione dispositivo, su en servicios de lista la actualizar y desea Web explorador un de a través servicios de configuraciones o cuenta una si modificó o desconectado el modo en nueva cuenta una ha creado Si desconectado. el modo Abrir servicio en la carpeta dispositivo, del borrador en y enviadas entradas y las línea y videos imágenes las ver Para línea servicio en Abrir un proveedor de servicios. de proveedor del variar pueden dependiendo disponibles Las opciones • • • • opciones: siguientes las de alguna seleccione servicio, un abrir de Después lista. la de servicio Nuevo registro dispositivo su con Enviados en Web Borradores servicios. de proveedor del elen explorador Web. vista La puedevariar dependiendo y borradores cargados álbumes los ver y seleccionado enAbrir Web explorad. Opciones : para ver las últimas veinte entradas que creó creó que entradas veinte últimas las ver para : Imágenes/video . También puede crear y modificar cuentas en cuentas y modificar crear puede También . : para ver y editar los borradores y cargarlos cargarlos y borradores editar los y ver : para : para: crear una entrada nueva > Recuperar servicios : para conectarse alservicio , seleccione seleccione , cargados en el servicio en en el servicio cargados Opciones . Seleccione un . Seleccione > cargar las imágenes al servicio al imágenes las cargar Tamaño imag. cargada línea en servicio al suscribió cuando se cuenta para su creó que y contraseña usuario de Nombre de usuario servicio. el para enviados los elementos incluso de su dispositivo, se borran también cuenta en cuenta una Si borra nuevo. servicios de proveedor para el nueva existe cuenta una para servicios proveedor cambiar el de No usar. desea puede que servicios servicios de Proveedor Nombre de cuenta Editar y cuenta una seleccione existente, cuenta una seleccione seleccione nueva, cuenta una crear Para existentes. cuentas En Mis cuentas configuraciones editar las Para línea contenido en Configuraciones para compartir Opciones aplicación la en Mis cuentas Mis . Seleccione alguna de las siguientes de alguna . opciones: Seleccione las siguientes > Mis cuentas Mis Opciones Configuraciones , puedecrear cuentas nuevaseditar o Compar. en línea en Compar. : para ingresarun nombre para la cuenta y > Contraseña Agregar nuevaAgregar cuenta , los servicios asociados a la cuenta cuenta la a asociados servicios , los : para seleccionar el proveedor de proveedor el para seleccionar : : para seleccionar el tamaño para para tamaño el seleccionar para : . nte, deberá crear una cuenta cuenta una crear deberá nte, Compar. en línea : para para el: ingresar nombre , seleccione , seleccione . Para editar Opciones , > Tamaño textoTamaño pantalla la imagen. cargar para el tamaño no afecta configuración Esta dispositivo. su de pantalla la en imagen la mostrar Tamaño imag. pantalla Configuración de aplicación para cuando agrega o edita texto de una entrada nueva. entrada una de texto o edita agrega cuando para usado para mostrar textoen borradores e ingresos enviados o : para seleccionar el tamaño de letra : para seleccionar el tamaño para para tamaño el seleccionar para : punto de acceso que desee. que acceso de punto el seleccione línea, en servicio al conectarse para usado predeter. acceso Punto predefinidos. de servicios proveedores los de de servicios anterior. No puede cambiar las configuraciones se pierde toda la información información la toda pierde se servicios, de proveedor cambia el Si servicios. de proveedor de un los detalles ver o nuevo servicios de proveedor un agregar de servicios, proveedor de configuraciones servicios de Proveedores Avanzadas : para cambiar el punto de acceso de acceso el punto para cambiar : : para ver o editar las Mis cuentas para el proveedor 167 Galería 168 Aplicaciones multimedia Opciones Seleccione musical. biblioteca su actualice dispositivo, su en de música archivos borrar agregar o de Después musical. biblioteca una crear para dispositivo del en busca archivos de música la reproductor memoria el Cuando abre el de reproductor música por vez, primera Agregar música de reproducción. listas escuchar y y crear música de archivos reproducir puede seleccione música, y de Pulse Aplicaciones multimedia Bibl. musical Bibl. Music Manager disponible en Nokia PC Suite. PC Nokia en disponible Manager Music Nokia utilizando insertada) una hay (si compatible a su dispositivo tarjeta de una memoria desde Sugerencia: puede resultar resultar puede alto. muy ya que el altavoz, el volumen utilizando si está oído del cerca dispositivo el sostenga No auditiva. su facultad perjudicar puede alto de volumen nivel volumen Advertencia: > Reproductor de música Biblioteca musical .

moderado. La exposición continua a un a un continua La exposición moderado. Puede transferir archivos de música de música archivos transferir Puede Escuche la Escuche Repr. mús. Repr. >

música a un nivel un nivel de a música Con el reproductor reproductor Con el Opciones > Actualizar Actualizar

uia,slcin u musical, seleccione de reproducción que tocó por última vez. Para ver la biblioteca Cuando abre el reproductor de música, aparece la pista o lista música Reproducir erdcrl acó iuet neir us . seleccione empezar . a Para reproduciendo, está que canciones de la lista ver Para o u o pulse anterior, o siguiente la canción reproducir . Para avanzar o . pulsada mantenga rebobinar, Para detener pulse una canción, o pulse y pausa, reproducir entre para cambiar reproducción, en está canción una Cuando seleccione en la vista, canciones las a reproducir Para empezar deseada. canciones de lista seleccione seleccione reproducción, lista de como una la lista deguardar canciones y el normal, seleccione seleccione el normal, y seleccionar Para elentre modo de reproducción aleatorio seleccione . modificar Para deel de la tono música, reproducción o pulse volumen, el ajustar Para guardada. reproducción de lista una o seleccione nueva reproducción de lista Opciones Opciones Opciones > > Agregar a lista pistas a lista Agregar Ecualizador Opciones Opciones > Abrir 'EnAbrir reproduc.' Opciones > > . Reprod. aleatoria Reprod. Biblioteca musical > Reproducir y haga una y una haga . Para . Para . y la la y . Biblioteca musical seleccione musical, la biblioteca Para ver Biblioteca musical seleccione de la lista, al o continúa comienzo de reproducción lista la al se detiene si la final dePara reproducción seleccionar Opciones pistas seleccione reproducción, de las listas ver Para existente. agregar a una o nueva reproducción de lista una elementos y los seleccione a de reproducción, lista la compositores o géneros artistas, álbumes, canciones, Para agregar disponibles. están si música, de archivos los de M4A o ID3 etiquetas las de recopilada es compositor y género artista, de álbum, información La seleccione Para ver la música. toda de Opciones seleccione plano, segundo en música de reproducción la continúe que y dejar standby modo al regresar Para seleccione música, descarga de la para favoritos Web sus Para abrir seleccione seleccione canciones, más agregar para creado, ha que reproducción . Para crear una lista de reproducción nueva, seleccione seleccione nueva, reproducción lista de una crear Para . > > Opciones Álbumes Opciones Opciones Opciones Nueva lista pistas lista Nueva Reproducir en 2° plano Reproducir > , Artistas > > > Todas las pistas > Repetición Descargas de pistas de Descargas Agregar pistas Agregar Agregar a lista pistas a lista Agregar las canciones organizadas, organizadas, canciones las , Géneros . Mientras ve una lista de lista una ve . Mientras . . muestra una lista . o Compositores Opciones . . Puede crear crear Puede . Listas de de Listas > . Puede usar tres diferentes métodos para transferir música: transferir para métodos tres usar diferentes Puede PC su desde música Transferir reciente o más 6.7 PC Suite Nokia • Una versión compatiblede la aplicación Windows Media • XP Windows Microsoft operación de Sistema • música: transferir para necesario es PC de software siguiente El Opciones seleccione dispositivo, su en canciones de selección biblioteca la actualizar Para 215. pág. Bluetooth", "Conectividad conectividad Bluetooth. Para obtener más detalles, consulte o compatible USB cable un usando compatible dispositivo otro u compatible PC una de música transferir Puede música Transferir no los archivos de música. de archivos los no una . Borrar reproducción, de lista la borra sólo reproducción de lista pulse de reproducción, lista una borrar Para desde la sección del Nokia N93 del sitio Web Nokia. Web sitio del N93 Nokia del la sección desde Player Media Windows de compatibilidad de la acerca detallada más información obtener Puede Player. (o más reciente) > Actualizar Bibl. musical Bibl. Actualizar después de que actualizó después la . 169 Aplicaciones multimedia 170 Aplicaciones multimedia pulse y seleccione seleccione y pulse Para cambiar el modo de conexión USB predeterminado, Para usarMusicen Nokia Nokia Manager PC Suite, • Player, Media Windows con música Para sincronizar • dura una unidad PC como una Para en ver dispositivo su • la guía del usuario Nokia PC Suite. PC Nokia usuario guía del la Manager, consulte Music con Nokia de música de archivos transferencia la sobre información más obtener Para música. en NokiaPC Suite se han optimizadopara trasferir archivos de Manager Music Nokia como Player Media Tanto Windows datos de cable como el método de conexión. de método el como seleccione y compatible USB cable el conecte dispositivo. el en compatible memoria de tarjeta una insertar debe Se música de Reproductor seleccione y compatible USB cable el conecte dispositivo. el en compatible memoria de tarjeta una insertar debe Se datos de Transferencia seleccione USB, cable el Si usa Bluetooth. conectividad establecer una conexión con un cable USB compatible o datos, de archivos transferir puede donde exterior . Conect. como el método de conexión. conexión. de método el como como el método de conexión. conexión. elde método como > Cable dat. > Modo de de Modo PC Suite

2 1 manuales: selecciones transferir Para Player. Media Windows que se en de usa como el su dispositivo nombre nombre un ingresar debe dispositivo, su conecte vez que La primera eliminar. o copiar que y desea las canciones demover, listas reproducción seleccionar puede manual, Con sincronización dispositivo. noen caso que haya suficiente de memoria disponible en su manual la sincronización selecciona Player Media Windows PC compatible, una con su dispositivo de conectar Después Sincronización manual correspondientes. Player Media Windows de ayuda de textos guías y las consulte más información, obtener Para Player. entre las diferentes versiones de la aplicación Windows Media La funcionalidad de la sincronización de música puede variar Player Media música con Transferir Windows en en clic haga y lista la en elemento un seleccione álbumes, o canciones eliminar Para sincronización. la para lista la con ventanilla la a álbumes o canciones las Arrastre conectado. está navegación de panel el en dispositivo su Player, seleccione Media Windows con dispositivo su de conexión la establecer de Después Remove from list from Remove (Eliminar de lista). de (Eliminar , , si más de un dispositivo flecha bajo bajo flecha Player, haga enMedia Windows en la clic predeterminada archivo de transferencia de opción la Para cambiar Sincronización automática 3 con las listas de reproducción de Windows deMedia con Player. las listas de reproducción Windows sincronizan se no dispositivo su en reproducción de listas Las para obtener más información. Player Media de Windows ayuda de los textos Consulte dispositivo. su de compatible memoria de tarjeta la en y del dispositivo memoria la en guardarse pueden de PC biblioteca que tener puede archivos más Su la sincronización. para de PC se selecciona musical biblioteca la toda reproducción, de listas no seleccionó Si Media Player. Windows en seleccionó que reproducción de listas sus en basándose automáticamente actualiza se dispositivo su en musical automatically colocaSi marca una cuadro en el de cotejo automatically device this Set up Sync. disponible en disponible el dispositivo. Haga clic en memoria hay suficiente que y de sincronizar desea que archivos los tenga lista la con ventanilla la que Verifique para iniciar la sincronización. la iniciar para Sync Borre o seleccione el cuadro de cotejo cotejo de cuadro el o seleccione Borre y conecta su dispositivo, la biblioteca la biblioteca dispositivo, su y conecta , seleccione su dispositivo y haga clic en en clic haga y dispositivo su seleccione , . Sync this deviceSync this Start Sync. Start Sync

la opción de impresión. de opción la imágenes con compatible a impresora una Para imprimir de imágenes. o visor de imágenes editor cámara, galería, la en y opción de impresión la imprimir desea que imagen la con imágenes Para imprimir formato .jpeg. el en automáticamente guardan se cámara la con tomadas Sólo puede imprimir imágenes en el formato .jpeg. Las fotos disponible). está (si compatible memoria de disponible),Bluetooth o una tarjeta conectividad está (si inalámbrica LAN compatible, datos de cable un usando Opciones seleccione predeterminada, impresora la Para cambiar disponibles. impresión de dispositivos de lista una Si la no está disponible, predeterminada aparecerá impresora aparece automáticamente. impresora la CA-53, Nokia cable de conectividad un usando Si como la impresora predeterminada. se configura impresora La impresora. una Seleccione imagen. la de seleccionar después disponibles impresoras de lista Al usar impresora Selección de opción la Use imágenes Imprimir

conectó una impresora compatible con con compatible impresora una conectó Impr. imágenes , conecte el cable de datos antes de seleccionar seleccionar de antes datos de el cable conecte , > Configuraciones Impr. imágenes Impr. por primera vez, aparecerá una Impr. imágenes para imprimir sus imágenes imágenes sus imprimir para > Impresora predet. Impresora Impr. imágenes , seleccione seleccione , Impr. Impr.

171 Aplicaciones multimedia 172 Aplicaciones multimedia Seleccione Seleccione Opciones seleccione Para impresora una predeterminada, configurar seleccionado. impresión de del dispositivo capacidades de varían dependiendo las disponibles Las opciones Configuraciones de impresión o por pulse sola página, una en caben no las imágenes Si o seleccionada. la impresora para disponibles los formatos pulse diseño, el cambiar Para predefinidos. diseños los usando muestran se seleccionadas imágenes Las la galería. en imagen una imprimir a comienza cuando sólo se abre impresión de La previa vista Vista de la previa impresión de papel de seleccione papel, de tamaño el seleccionar Para para mostrar las páginas adicionales. páginas las mostrar para , el tamaño del de lapapel del y lista , el tamaño > Cancelar Impresora predet. Impresora para regresar a la vista anterior.regresar a la vista para Aceptar Tamaño . Transferen./memoria seleccione inalámbrica, LAN de través a PC compatible una a dispositivo su desde multimedia Para transferir y copias dehacer seguridad de archivos archivos los de de seguridad copias Hacer seleccione almacenamiento las configuraciones cambiar Para Seleccione multimedia. archivos y dispositivo un una carpeta a la cual desea transferir los a bu comienza dispositivo Su 145. pág. inalámbrica", "LAN Consulte Opciones o Carpeta almacenamiento Carpeta > > Configuraciones Transferencia automática Transferencia scar dispositivos. Seleccione Seleccione dispositivos. scar Aceptar Disposit. Opciones . . , > . Mensajes receptor. dispositivo el según variar puede multimedia y mostrar mensajes multimedia. La apariencia de un mensaje Sólo los dispositivos con funciones compatibles pueden recibir Pulse y seleccione Para crear un mensaje, seleccione seleccione mensaje, un crear Para servicios. de comandos y enviar celular difusión de mensajes Web, servicio de mensajes recibir infrarrojos, o Bluetooth la conectividad datos usando mensajes y recibir puede También datos. contienen que especiales texto de texto, mensajes multimedia, mensajes de e-mail y mensajes de mensajes y organizar editar ver, recibir, enviar, crear, e-mail se guardan en en guardan se e-mail de mensajes Los e-mail celular. difusión y de conrecibidos, la excepción de los mensajes de entrada Buzón Mis carpetas Mis mensajes, consulte a su proveedor de servicios. proveedor a su consulte mensajes, de los de servicios acerca obtener información elsignifica que lo destinatario recibido. haya Para no embargo, Sin dispositivo. el en programado mensajes de centro del número al su mensaje Nota: contiene las siguientes carpetas: siguientes las contiene Mensajería Su dispositivo puede in Su dispositivo puede : organice sus mensajes en carpetas. en mensajes sus organice : : aquí se guardan los mensajes Mensajes Buzón de correoBuzón de . En . En Crear mensaje Crear dicar que se ha enviado Mensajes . , puede , puede . mensajes a la espera de su envío. su de espera a la mensajes salida Buzón 186. pág. configuraciones", guardar, consulte "Otras infrarrojos. Para cambiar la cantidad de mensajes para mensajes enviados usandola conectividad Bluetooth o los de la excepción con enviados, sido han que Enviados enviados. sido han no que Borrador 183. pág. encuentra desconectado. Consulte "E-mail", ver losmensajes dee-mail ya recuperadosmientras se o nuevos e-mail de mensajes sus recuperar para remoto Buzón de correo de correo remoto. correo de a buzón conecte su vez se que la próxima enviados puede programar los demensajes e-mail para ser También la red. de cobertura la zona de de fuera salida, está por su dispositivo ejemplo, cuando de Ejemplo: plantillas. carpeta la de los textos use regularidad, envía con que Sugerencia: : aquí se guardan los últimos veinte mensajes : aquí se guardan los borradores de mensajes los mensajes se guardan en el buzón buzón el en guardan se mensajes los : aquí se guardan temporalmente : los aquí se guardan temporalmente Para evitar volver a escribir mensajes mensajes escribir a volver evitar Para : conéctese a su buzón de correo correo de buzón su a conéctese : 173 Mensajería 174 Mensajería seleccione seleccione de red, para servicios activación de comandos por ejemplo servicios, de proveedor a su USSD), comandos denominados (también servicio de solicitudes y enviar ingresar Para su proveedor de servicios. En la vista principal de principal la vista En servicios. de su proveedor con comuníquese disponibles, relevantes temas de números y los temas conocer Para o tráfico. clima el sobre ejemplo varios temas, sobre proveedor mensajes depor servicios celular Difusión recepción de difusión celular. difusión de recepción UMTS. Una conexión de paquete de datos puede impedir la redespueden recibir en Los se celularmensajes difusión de no seguimiento. el para ) ( sido marcado ha si o tema de un o nombre número el estado, ver puede seleccione de principal dirección de e-mail. dirección entregaun mensaje de multimedia enviadouna a de informe un recibir no sea red).posible que Puede de (servicio enviado ha que multimedia mensajes y texto de mensajes los de entrega de informe Informes a apts us . o pulse carpetas, las entre alternar para predeterminadas, carpetas las Sugerencia: Opciones Opciones Mensajes : puede solicitar a la red que le envíe un envíe le que red la a solicitar puede : (servicio de red) le permite recibir de su su recibir de permite le red) de (servicio > Cuando haya abierto cualquiera de de abierto cualquiera haya Cuando > Difusión celular Difusión . Comando servicio . En la vista vista principal, la . En en la vista en la vista Mensajes , • Para insertar un espacio, pulse . Para mover el cursor cursor el . Para mover espacio, pulse Para insertar un • usando, que está la tecla en aparece letra la Si siguiente • hasta veces varias ) — ( numérica tecla una Pulse • tradicional. texto de ingreso el palabras. aparece cuando está escribiendo texto escribiendo está cuando aparece 1 el de ingreso usando predictivo. texto palabras. agregar puede le se al cual incorporado diccionario un en basada está de predictivo de texto ingreso Latecla. función de la pulsación sola una con letra cualquier ingresar Puede Ingreso de texto predictivo Ingreso de texto tradicional 123 ABC Escribir texto al renglón siguiente, pulse tres veces. tres pulse siguiente, renglón al letra. para la ingrese e vencimiento) de tiempo el finalizar (o pulse aparezca cursor el espere hasta que tecla. la en impresos los que una para numérica tecla disponibles caracteres más hay que Observe deseado. el carácter aparezca que Para activar el ingreso de texto predictivo, pulse y y seleccione predictivo, pulse texto de ingreso Para activar el ne dispositivo. el en editores los todos para predictivo texto de ingreso elindica modo numérico. , aparece cuando esta escribiendo texto usando usando texto escribiendo esta cuando aparece abc y Abc Activar texto predictivo indican el modo de carácter seleccionado. seleccionado. de carácter el modo indican . Esto activa el el activa . Esto 3 2 4 encuentra una a una o pulse y seleccione y predictivo encuentra una a una o pulse diccionario el que similares palabras las ver para repetidamente pulse la es correcta, Si la palabra no agregar para espacio. o pulse para confirmarla un pulse la correctamente, palabra de escribir termine Cuando Lapalabra sugeridacambia tras cada pulsación de la tecla. para k, para o, N, para seleccionado, pulse está español diccionario el cuando "Nokia" escribir para letra.Por ejemplo, cada . Pulse tecla vez por sólo una la a de la las teclas pulse deseada, palabra la escribir Para Escriba la siguiente palabra. siguiente Escriba la a la antigua. más diccionario lleno,está una nueva palabra reemplazará Si el signo signo Si el Aceptar palabra usando el ingreso de texto tradicional y seleccione seleccione al diccionario, que no estáen el diccionar para i y para a. para y para i . La palabra se agrega ? > aparece después de la palabra, significa la palabra,significa de después aparece Coincidencias Insertar palabra Insertar io. Para agregar una palabra .

al diccionario. Cuando el Cuando al diccionario. , ingrese la la ingrese , Texto Texto mantenga pulsada . pulsada mantenga especiales, caracteres los de lista una abrir Para . pulse comunes, más puntuación de signos los usar Para . pulsada mantenga carácter, pu un carácter, borrar Para . pulse de caracteres, diferentes modos los Para alternar entre . pulsada mantenga numérico, y texto de ingreso de los modos entre alternar Para deseada. numérica tecla la pulsada mantenga texto, de de ingreso modo el en número un insertar Para texto predictivo de ingreso uso del el sobre Sugerencias seleccione y predictivo pulse del dispositivo, editores Para el de ingreso texto desactivar en los predictivo todos predictivo texto de ingreso el Desactivar para agregar un espacio. pulse de la parte . segunda Escriba la palabra compuesta, la completar Para palabra compuesta. pulse confirmarla, Escriba la primera parte de Escribir palabras compuestas et rdcio us dos veces rápidamente. pulse predictivo, texto Sugerencia: > Desactivado Para activar el o desactivar ingreso de . s .Pr orrmsd un de más borrar . Para lse la palabra compuesta, para para compuesta, la palabra Texto 175 Mensajería 176 Mensajería 1 puede reducirel tamaño para poder enviarla por MMS. el dispositivo límite, excede este insertada MMS. Si la imagen de los mensajes limitar el tamaño puede La red inalámbrica 183. "E-mail", pág. y 177 pág. e-mail", y de MMS Consulte correctas. conexión de configuraciones las activadas tener deberá e-mail, un escribir o multimedia mensaje un crear poder de Antes receptor. dispositivo del dependiendo variar, puede multimedia de un mensaje La apariencia Escribir y enviar mensajes Si no ha configurado su cuenta de e-mail, se le indicará seleccione correo, de indicará buzón de la guía con le se e-mail, de e-mail de configuraciones las crear Para haga. cuenta lo que su configurado ha no Si E-mail (MMS) multimedia Mensaje multimedia Mensaje corto opciones: siguientes Seleccione aacarácter. cada seleccione cuando pulse vez, la a especiales Sugerencia: : para enviar un e-mail un enviar : para Crear mensaje Crear : para enviar un mensaje de texto de mensaje un enviar : para Para insertar varios caracteres caracteres varios insertar Para : para enviar un mensaje un mensaje enviar : para "Recibir configuraciones configuraciones "Recibir y alguna de las de y alguna Iniciar . 3 2 4 5 seleccione seleccione visibles, los campos Para cambiar o e-mail. multimedia campo En el portapapeles. del dirección pegar el número o copiar y . pulse También destinatarios, los a separar puede un punto y coma ( y coma punto un agregar destinatario. Para del e-mail de dirección o telefónico número el ingresar o contactos de o grupos destinatarios En el campo campo En el grabados, 153. consulte pág. video", de "Configuraciones . Para cambiar el formato en el cual se guardan los videos sonido, aparece Insertar plantilla, seleccione una insertar Para En el cuadro de mensaje, escriba el mensaje. multimedia, seleccione seleccione multimedia, al mensaje objeto multimedia Para agregar un Imagen para seleccionar los seleccionar para , o Clip de sonido Insertar objeto Insertar Opciones Asunto Para , pulse , pulse ; ) para , ingrese el asunto del mensaje del mensaje asunto el , ingrese > Campos de dirección de Campos Opciones o Videoclip > Plantilla > Insertar objeto Insertar . Cuando agrega . Opciones . > > 7 6 queda en el salida Losmensajes de e-mail vanautomáticamente al un solo mensaje. en enviar se puede que caracteres de cantidad la limita se que manera tal de espacio, más usan idiomas, otros de los caracteres y signos otros u Lo cargos correspondientes. los cobre le servicios de su proveedor Es que posible mensajes. o más dos serie de una como enviados son largos más textos Los mensaje. solo un para caracteres de límite el exceden que de texto mensajes enviar puede dispositivo Su 8 seleccione seleccione multimedia, mensaje del previa vista una ver Para Videoclip Opciones seleccione e-mail, a un adjunto archivo agregar un Para nueva diapositiva al mensaje, seleccione alnueva diapositiva mensaje, seleccione seleccione multimedia, mensaje un para o video sonido foto o grabar nueva una tomar Para Imagen o niao o . por indicados son Enviar Para enviar el mensaje, seleccione antes de ser enviados. Si el envío falla, el e-mail el e-mail falla, envío Si el enviados. ser de antes o pulse . pulse o , seleccione adjuntos,la aplicación abra apropiada y Sugerencia: Clip de sonido de Clip Buzón salida o > Opciones Nota Insertar . Los archivos adjuntos de e-mail e-mail de adjuntos archivos Los . Enviar Para enviar otros tipos de archivos Para de tipos archivos otros enviar > > con el estado estado el con Imagen Vista previa o > Videoclip Vía e-mail Vía s caracteress que llevan tilde , Clip de sonido Opciones Insertar nuevo . . Para insertar una una insertar Para . Fallido , si está disponible. Diapositiva . > Buzón , > . 2 1 MMS configuraciones las manualmente Ingresar por su proveedor de servicios. proveedor de servicios. Siga las instrucciones proporcionadas su con comuníquese datos, de los servicios a suscripción y disponibilidad sobre información más obtener Para 179. pág. configuraciones", y "Datos Consulte servicios. de proveedor de su un mensaje en las configuraciones recibir Puede Recibir configuraciones MMS y de e-mail Pulse y seleccione seleccione y Pulse 240. pág. "Conexión", Consulte multimedia. de mensajería de acceso punto un Puntos de acceso Pulse y seleccione y seleccione Pulse utmda,pg 183. pág. multimedia", "Mensajes consulte También preferida. conexión la uso en acceso Configuraciones osle"esjsmliei" á.183. pág. multimedia", "Mensajes Consulte creación MMS creación presentación seleccione y multimedia un mensaje a crear Comience multimedia. mensaje y enviarla un enen sonido y texto una presentación Sugerencia: y el punto de acceso que creó como como creó que acceso de el punto y Puede combinar imágenes, video, video, imágenes, combinar Puede . La opciónsólo aparecesi > y defina las configuraciones para para configuraciones las defina y está configurado en Mensaje multimedia Herram. Mensajes Opciones > Config. > Opciones Dirigido > > Crear > Conexión Punto Punto Modo Modo > o Libre > . 177 Mensajería 178 Mensajería seleccione seleccione y aparecerán elen modo standby. Para abrir el mensaje, un mensaje, Cuando recibe Bluetooth. conectividad de la a través recibidos datos leído, no multimedia mensaje un y por datos recibidos infrarrojos leído, no texto carpeta la En e- de configuraciones sus correctamente Determinar • Consulte IAP. "Conexión", un correctamente Configurar • lo siguiente: hacer deberá e-mail, reenviar y responder recuperar, recibir, enviar, poder de Antes entrada de de Si selecciona mail. 240. pág. remoto remoto y de su proveedor de deservicio Internet (ISP). de correo buzón por su provistas instrucciones las Siga de cuenta una e-mail por Deberá tener separado. Iniciar seleccione correo, de buzón de la guía con e-mail de configuraciones las crear Para haga. lo que indicará le Mensajes us . , pulse eii mensajes recibir de entrada: Buzón . También consulte "E-mail", pág. 183. pág. "E-mail", consulte También . Mostrar Buzón entrada Buzón y no ha configurado su cuenta de e-mail, se . Para abrir un mensaje en el en el un mensaje abrir . Para Buzón de correo indica un mensajede , 1 mensaje nuevo mensaje 1 en la vista principal Buzón Buzón

Mensajes multimediaMensajes multimedia, seleccione seleccione multimedia, mensaje el en incluidos multimedia objetos los ver Para indicador. el seleccione aparece si hay sonido incluido o ), una podría ver imagen y un mensaje. ( multimedia mensaje un abre Cuando Opciones dispositivo, seleccione su en mensaje el recuperar para co una iniciar Para multimedia. de mensajes en el espera a centro la se encuentra multimedia mensaje un indicando que notificación recibir una Puede seleccione seleccione 8150), o HP Photosmart 450 HP Deskjet móvil impresora la (como Bluetooth (BPP) con conectividad impresión de con perfil básico equipada compatible impresora una en o multimedia texto de mensaje un imprimir Para Opciones recibido, seleccione mensaje responder Para un Si el mensaje incluye una presentación multimedia, aparece aparece multimedia, presentación una incluye el mensaje Si aarpoui apeetcó,slcin lindicador. . Para reproducir la presentación,el seleccione si hay video incluido. Para reproducir el sonido o video, o video, sonido el reproducir Para incluido. video si hay contener virus contener pueden multimedia mensajes los de objetos Los Importante: > > Opciones Recuperar Responder Tenga Tenga precaución al abrir los mensajes. >

. o dañar el o dispositivo PC. . Imprimir Opciones nexión de paquete de datos de datos paquete de nexión . > Objetos . seleccione seleccione mensaje de configuración. Para guardar las configuraciones, un en compañía la de información de administración de departamento o servicios de proveedor su de ): Mensaje de configuración ( datos con varios recibir tipos puede Su dispositivo de mensajes Datos y configuraciones Opciones Tono timbre guardados. serán no negocios de Los o adecertificados laarchivos sonido adjuntos tarjeta Contactos Tarjeta de negocios servicios, seleccione seleccione servicios, de proveedor del la identificación de lugar en standby Logo operad. Opciones Entr. agenda Opciones configuraciones de puntos de acceso seleccione favoritos, y a favoritos Agregar seleccione Web, lista en en una aparecen Mensaje Web > > > , seleccione seleccione , Opciones Guardar Guardar en Agenda en Guardar Guardar todos Guardar : para guardar el tono de timbre, seleccione seleccione timbre, de tono el guardar para : : para guardar la invitación, seleccione seleccione invitación, la guardar para : : para que el logotipo aparezca en el modo el modo aparezca en el logotipo para que : : para guardar el favorito en los favoritos en los el favorito que para guardar : : para guardar información en en para guardar información : ie mensaje contiene el Si . Opciones . > Opciones Guardar : puede recibir configuraciones configuraciones recibir : puede , para guardar los datos. los guardar para , > . > . Guardar Guardar tarj. negocios tarj. Guardar Opciones . > . buzón de correo? de buzón ( correo de buzón al conectarse desea si elCuando abre le buzón de pregunta correo, el dispositivo Abrir el buzón de correo Si selecciona servicios. de proveedor su con comuníquese suscripción, y disponibilidad de información más obtener Para o enlace. texto de mensaje notificaciones son ) un contener y pueden de periódico) titulares ejemplo, (por ( Web servicio de mensajes Los Mensajes de servicio Web de alda buzón reemplaza a correo que el usted de nuevo, Cuando crea nombre un buzón seleccione de correo, la de buzón guía con de e-mail configuraciones las crear Para lo haga. que le indicará se de e-mail, cuenta extendida puede proporcionar información más información puede proporcionar extendida notificación Una remoto. correo de buzón su e-mailen hay Notif. e-mail Mensajes Iniciar Buzón de correo Buzón ud ra at esbznsd correo. de seis buzones hasta crear Puede . : la nota le indica cuántos mensajes nuevos de de nuevos mensajes cuántos indica le nota la : Buzón de correo de Buzón abé osle"-al,pg 183. pág. "E-mail", consulte También . ). Buzón de correo y no ha configurado su en la vista principal vista en la ¿Conectar con con ¿Conectar

detallada. 179 Mensajería 180 Mensajería no estará conectado al buzón de correo remoto. correo de al buzón conectado no estará dispositivo su desconectado, al estar e-mail de mensajes Si está desconectado, seleccione seleccione desconectado, Si está mensajes de e-mail Recuperar seleccione desconectado, está mientras previamente recuperados e-mail de mensajes los ver Para 240. También consulte"Conexión", pág. a un buzónde correo remoto usando una conexión dedatos. continuamente conectado está en línea, ve mensajes Cuando seleccione nuevos, mensajes o e-mail de encabezados con el buzón de correo recuperar y Para conectarse 1 remoto. correo de buzón un a conexión la iniciar para seleccione de Para mensajes, recuperación la detener correo de buzón Todos marcados sido han que e-mail de Seleccionados nuevos e-mail Nuevos e-mail seleccione remoto, correo de buzón un con abierta conexión una tenga Cuando dañar su dispositivo o dañar su dispositivo PC. o virus contener pueden e-mail de Los mensajes Importante: : para recuperar todos los mensajes del del mensajes los todos recuperar para : y alguna de las siguientes opciones: las siguientes de y alguna : para recuperar todos los mensajes : todos para de los mensajes recuperar Cancelar : para recuperar sólo los mensajes los mensajes sólo recuperar para : Tenga Tenga alprecaución los abrir mensajes. . Opciones Opciones No . Cuando ve los ve los Cuando . > > Recuperar Conectar Sí

. 2 seleccione seleccione al dispositivo; cargado ha sido no oscuro, indicador un y seleccione Opciones adjunto archivo de indicador tenga el que mensaje un abra de e-mail, adjuntos archivos ver Para 3 Los indicadores de deestado e-mail son como siguen: desconectado. está mientras e-mail de mensajes Desconectar seguir viéndolos en línea o seleccione o seleccione línea en viéndolos seguir puede e-mail, de mensajes los recuperar Tras buzón de correo. de buzón del mensaje este recuperar si desea se le pregunta desconectado, está y recuperado ha sido no e-mail de . Si el mensaje Para abrir un mensaje de e-mail, pulse del mensaje sido ha borrado del dispositivo. y el contenido e-mail ha sido leído El encabezado de leído. sido ha e-mail de El mensaje dispositivo. su por recuperado sido ha y no leído sido ha e-mail de El mensaje dispositivo. su por sido recuperado ha e-mail El nuevo dispositivo. su por recuperado ha sido no línea) o en desconectado (modo e-mail El nuevo > Opciones Archivos adjuntos Archivos para cerrar la conexión y ver los conexión la cerrar para > Recuperar . Si el archivo adjunto tiene Si el tiene adjunto . archivo . Opciones > de datos. de transmisión por los cargos de acerca información obtener para servicios de proveedor con su Comuníquese servicios. de proveedor su de la red mediante datos de cantidades de grandes la transmisión incluir puede automáticamente e-mail recupere que para el dispositivo configura Si mensajes. los recuperarán propia red remoto, seleccione seleccione remoto, de correo el buzón en retenido lo tiene mientras e-mail de mensaje un de contenido el dispositivo del eliminar Para Eliminar mensajes de e-mail auto. seleccione Para recuperar mensajes de e-mail automáticamente, Recuperar mensajes de automáticamentee-mail Opciones seleccione 8150), HP Photosmart o 450 Deskjet HP móvil (como impresora la Bluetooth con conectividad perf con equipada compatible impresora una en e-mail de mensaje un imprimir Para 205. "Crear entradas de la agenda",pág. y 206 pág. reunión", de "Solicitudes Consulte correo. También puede recibir solicitudes reunión de en el buzón de de: , seleccione seleccione , > Recuperac. encabez. > y defina cuándo y con cuánta frecuencia se se frecuencia cuánta con y cuándo defina y Opciones Imprimir Sólo del teléfono del Sólo Opciones > . Config. de e-mail > il básico de(BPP) impresión > Eliminar Siempre activada . . En . En > Recuperación Elim. mens. o Sólo buzón de correobuzón de remoto,seleccione datos al de la conexión para finalizar línea, en está Cuando correo buzón de del Desconectarse remoto, seleccione seleccione remoto, correo de del buzón y dispositivo del e-mail un borrar Para correoremoto para actualizarel estado. de al buzón dispositivo su con conexión una establecer después remoto, correo de buzón su de de e-mail mensaje eliminar debe encabezado, el borrar desea Si también el su dispositivo. en queda del e-mail encabezado el mensaje, del contenido el borre Aunque remoto. correo de buzón el en de encabezados e-mail una copia de los crea El teléfono borrado durante la próxima conexión ( ) y seleccione seleccione y ) Opciones ( conexión próxima la durante borrado ser para marcado ha sido que e-mail a un desplácese servidor, Para cancelar la eliminación de un e-mail del dispositivo y del remoto. correo de buzón al conexión la cierre cuando borrados ser para marcados mensajes los podrá eliminar sólo POP3, protocolo el usando está Si buzón. del borrado será mensaje el remoto, de correo al buzón conexión la próxima En dispositivo. su de e-mail el borra se primero desconectado, Si está seleccione > Teléfono y servidor y Teléfono Deshacer eliminar Deshacer Opciones > Eliminar . . Opciones . En . En Elim. mens. de: mens. Elim. > Desconectar , . 181 Mensajería 182 Mensajería 3 2 Ver mensajes en la tarjeta SIM tarjeta en la mensajes Ver 4 Rellene todos los campos marcados con con marcados campos los todos Rellene de mensajes Configuraciones 1 dispositivo. su carpeta en una en copiarlos deberá SIM, mensajes los ver de Antes crearlos, editarlos ni eliminarlos. editarlos crearlos, cambiarlos, pueda no que posible y es servicios de proveedor en por su su dispositivo estar pueden preconfigurados accesos de o puntos mensajes de centros los todos o Algunos de configuración. configuraciones desu proveedor de servicios en un mensaje las obtener puede También de servicios. proveedor por su proporcionadas las instrucciones Siga rojo. asterisco un con Seleccione Seleccione Seleccione Seleccione Para ver los mensajes, abra la carpeta. la abra mensajes, los ver Para Para comenzar a copiar, seleccione la carpeta y carpetas. de Marcar Opciones laEn de vista principal o Marcar todo > Opciones Opciones Mensajes SIM > > para marcar mensajes. marcar para Mensajes Copiar Marcar/Desmarcar . . Se abre una lista lista una . Se abre , seleccione , seleccione Debe definirse Debe > Aceptar o . Pulse Pulse y de Mensajes texto seleccione il e oamt.Cnut Cnxó" á.240. pág. "Conexión", Consulte admite. lo red la si de datos, o paquete GSM red texto: de mensajes enviar Conexión preferida servicios. de proveedor su con formatos. Comuníquese otros estos en texto de mensajes convertir puede mensajes de centro su que de seguro está Mens. enviado como de mensajes. centro del elimina se mensaje el validez, de período del dentro destinatario al encontrar puede no se red). Si de (servicio falla intento primer si el mensaje su reenvía mensajes de mensajes de Validez red). de (servicio mensajes sus de entrega de informes recepción de Informe texto. de mensajes entregar para usará que Centro mens. en uso seleccione disponible, esté cuando codificación de sistema otro para Codificac. caracteres definidos. sido han que texto de mensajes de Centros de mensajes opciones: siguientes Configuraciones Soporte reducido > Mensaje corto : seleccione por cuánto tiempo el centro el tiempo centro por cuánto seleccione : : seleccione la conexión que usa que conexión la seleccione : : para usar la conversión de caracteres caracteres de conversión la usar para : : seleccione el centro de mensajes mensajes de centro el seleccione : centros los todos de lista una ver : : cambie esta opción solamente si si solamente opción esta : cambie Mensajes : seleccione si la red enviará si enviará la red : seleccione . > Opciones y alguna de las las de alguna y >

para Configuraciones Pulse y multimedia Mensajes seleccione red). de (servicio texto de de de centro número mensajes usando elde mismo respuesta Resp. mismo centro de mensajes multimedia puede ser más costoso. más ser puede multimedia mensajes de Cuando está fuera de su red doméstica, el envío y recepción multimedia. mensajes de centro del recuperar puede que multimedia mensaje un hay que indicando notificación domést. red en seleccione doméstica, en su red automáticamente multimedia mensajes recibir Para multimedia. mensajes los multim. Recuperación multimedia. mensajes de centro para el preferida la conexión como usado Punto acceso en uso admitidos. sean no que mensajes enviar impedirá le dispositivo Seleccione destinatario. el por admitido sea no posiblemente que mensaje trata de un enviar usted si informa MMS creación Modo Pequeño creación MMS multimedia: mensaje Tamaño de imagen opciones: siguientes las de o Grande está configurado como configurado está Fuera de su red doméstica, recibiráuna > . Mensaje multimedia Mensaje : defina el tamaño de la imagen en un en imagen de la tamaño el defina : : seleccione si desea enviar el mensaje el mensaje enviar si desea : seleccione : si selecciona : si selecciona Original : seleccione el punto de acceso acceso de punto el seleccione : Mensajes : seleccione cómo desea desea :recibir seleccione cómo (aparece sólo cuando cuando (aparece sólo > Dirigido Opciones Dirigido y alguna alguna y , el dispositivo dispositivo ,le el Restringido > o Libre Auto. Auto. Modo Modo , el , el ), Configuraciones Pulse y E-mail seleccione Si selecciona Si selecciona iuetsopciones: siguientes de mensajes. mensaje se elimina del dentrocentro del período de validez, el destinatario al encontrar puede se Si no de red). (servicio falla intento primer el si mensaje su reenvía mensajes de de Validez mensajes recibidos. multimedia los mensajes de de entrega informes envíe dispositivo infs. envío Denegar de e-mail. dirección una a enviado multimedia un mensaje de entrega de informe un recibir posible sea no que Puede red). de (servicio registro el aparezca en enviado mensaje Informe de entrega multimedia. mensajes publicidad Recibir anónimos. remitentes de mensajes Mensajes anónimos doméstica. red su de y dentro fuera mensaje el para recuperar datos de paquete de conexión una automáticamente activa teléfono su Recuperación multim. > : defina si desea recibir publicidad en en recibir publicidad si desea : defina E-mail : seleccione por cuánto tiempo el centro : seleccione si deseaque el estado del : seleccione si desea impedir su que impedir si desea : seleccione : seleccione si desea rechazar los rechazar si desea seleccione : Mensajes y alguna de las alguna de y > Opciones > Siempre automático > , 183 Mensajería 184 Mensajería de correo remoto. Las opciones son son Las opciones remoto. correo de buzón de servicios de proveedor su por recomendado Tipo buzón de correo de Nombre buzón 240. pág. "Conexión", uso en acceso Punto e-mail. su recibe que correo de servidor del host Servidor correo entr. cuando trate a de conectarse su buzón de remoto. correo contraseña su indique que indicará le se rellenar, sin Contraseña servicios. de proveedor su por suministrado fue Nombre de usuario opciones: siguientes recibe, seleccione seleccione recibe, que el e-mail para configuraciones las editar Para Configuraciones correo buzón Nuevo Para crear un buzón de correo nuevo, seleccione desea usar para enviare-mail. Buzón correo en uso auto. Recuperación Config. de usuario cambiarle las siguientes configuraciones: correo Buzones de : ingrese su contraseña. Si deja este recuadro recuadro deja este Si contraseña. su ingrese : : ingrese un nombre para el buzón de de correo. buzón el para nombre un ingrese : E-mail entrante : seleccione un buzón de correo para para correo de buzón un : seleccione , e avsapicpldlbznd correo. de buzón del principal vista la en

: ingrese su nombre :de le usuario su nombre que ingrese Config. recuperación Config. de : seleccione el buzón de : correo seleccione que : seleccione un IAP. Consulte Consulte IAP. un seleccione : : ingrese la dirección IP o nombre de o nombre IP la dirección : ingrese : define el protocolo de e-mail e-mail de protocolo el define :

conexión y alguna de las de y alguna POP3 Config. conexión e y IMAP4 Opciones . > , osle"oein,pg 240. "Conexión", pág. Consulte uso en acceso Punto obtener más información. para servicios de su proveedor con Comuníquese servicios. de su proveedor saliente usar el de sólo pueda que servidor Es posible e-mail. su envía que correo de servidor del host Servidor correo sal. susmensajes se envíana esta dirección. a respuestas Las servicios. de proveedor su suministró le e-mail dirección Mi puede puede cambiar si ha guardado o seleccionar puede se sólo configuración Esta seleccione seleccione envía, que e-mail el para configuraciones las editar Para de correo. buzón al conecta se mientras remoto e-mail de al servidor de contraseñas envío el encriptar para POP3 APOP seguro Acceso Puerto usada para asegurar la conexión a su buzón de correo remoto. (puertos) Seguridad de correo. buzón su a conexión nueva una establecer y desconectarse deberá recientes, más de e-mail ver los mensajes Para línea. en está cuando automáticamente se actualizan no e-mail de de correo. de buzón Si usa el POP3, protocolo los mensajes : defina un puerto para la conexión. la para puerto un defina : E-mail saliente : ingrese la dirección IP o nombre de nombre o IP la dirección ingrese : (sólo para el POP3): protocolo con use : ingrese la dirección de e-mail que que e-mail de la dirección ingrese : : seleccione la opción de seguridad seguridad de la opción seleccione : : seleccione un IAP. IAP. un seleccione : y alguna de las siguientes opciones: salido de las configuraciones salido de las configuraciones

una vezyse no mensaje de e-mail: recup. para E-mail Configuraciones recuperación Seleccione dispositivo. su Enviar mensaje función. esta admite destinatario el cuando destinatario del dispositivo el en e-mail de dirección a su nombre Mi Configuraciones de usuario para configuraciones Las Mens. y arch. adj. arch. y Mens. entrante E-mail (puertos) Seguridad cuando reciba nuevo correo en el buzón de correo. de buzón el en correo nuevo reciba cuando nota, y una tono un nuevos, e-mail de indicaciones e-mail alertas Nvas. de e-mail. mensajes sus Incluir firma bajo definida dirección del copia e-mail en su buzón de remoto y correo laen a sí mismo Env. copia disponible. está correo remoto de buzón al la conexión cuando envía se Enviar mensaje seleccione cuando correo de buzón al conecte se dispositivo : ingrese su nombre aquí. Su nombre reemplaza aquí. Su nombre : su ingrese nombre : seleccione si desea adjuntar una firma a : defina la forma de enviar el e-mail desde desde el e-mail de enviar forma la : defina . Si selecciona . Si selecciona . : defina las partes recuperará que del Sólo encabezados Sólo y : seleccione si desea recibir las recibir desea si seleccione : : seleccione si desea guardar una guardar una desea si seleccione : Puerto Mi dirección e-mail Nombre deusuario Inmediatamente son similares a las son similares de En sig. conexión sig. En , Limite tamaño para que el el para que . , Contraseña , el e-mail , el e-mail o , mensajes seleccione servicio, de mensaje un recibe cuando contenido recuperar para red de conexión una inicie explorador e el automáticamente active para que teléfono el configurar Si desea de servicio. mensajes recibir desea Configuraciones Pulse y Mensajes de servicio Web seleccione datos. de transmisión por los cargos de acerca información obtener para de servicios proveedor su con Comuníquese servicios. cantidades de la datos red mediante de su proveedor de de grandes transmisión la incluir puede automáticamente e-mail recupere que para dispositivo el Si configura mensajes. los recuperan se frecuencia, qué con y cuando definir Puede automáticamente. e-mail nuevo recupere Recuperac. encabez. Recuperación automática de estas carpetas. estas de contenido y recupere remoto correo de buzón el en carpetas de carpeta Suscripc. se suscribirán. que carpetas las para IMAP4 carpeta Ruta del buzón de correo. son recuperados nuevos recup. para Cantidad > Automáticamente > Mensaje de servicio : seleccione si desea que el dispositivo dispositivo el que desea si seleccione : (sólo para IMAP4): suscríbase a otras a otras suscríbase para IMAP4): (sólo (sólo para IMAP4): defina una ruta ruta una defina para IMAP4): (sólo Mensajes : defina cuántos mensajes de e-mail e-mail de mensajes cuántos : defina . > Opciones . Seleccione . Seleccione si Descargar > 185 Mensajería 186 Mensajería seleccione seleccione y Pulse asociados. temas de y números disponibles con su proveedor los temas de Verifique servicios Difusión celular etemas. de lista la en nombre un sin nuevos los números guardar y temas de números nuevos los automáticamente busque Deteccióntemas de mensajes: mensajes: Idioma celular. difusión Recepción celular Difusión : seleccione los idiomas en los cuales desea recibir recibir desea cuales los en idiomas los seleccione : Todos : seleccione si desea recibir mensajes de de mensajes recibir desea si seleccione : Mensajes , y alguna de las siguientes opciones: las siguientes de y alguna Seleccionados : seleccione si desea que el dispositivo dispositivo el que desea si : seleccione > Opciones u > Otros Configuraciones . > Pulse Pulse y Otras configuraciones seleccione guardarán en lacarpeta guardados mens. Nº carpeta la en envía que e-mail o multimedia mensajes texto, de mensajes los de Guardar mens. env. Configuraciones Tarjeta memoria insertada el dispositivo, en seleccione Memoria enuso el mensaje más antiguo. es de veinte mensajes. Cuando alcance el límite, se eliminará : si hay una tarjeta de memoria compatible compatible de memoria : si hay tarjeta una para guardarsus mensajes. > Otras : seleccione si desea guardar una copia guardar una si desea seleccione : : defina cuántos mensajes enviados mensajes se enviados : cuántos defina Mensajes Enviados Enviados y alguna de las siguientes opciones: . El límite. El predeterminado > . Opciones Memoria teléfono > o Llamadas de voz de Llamadas Realizar llamadas Pulsar la tecla siempre finalizará la llamada, incluso incluso llamada, la finalizará siempre activa. aplicación hay otra si tecla la Pulsar 3 2 1 138. pág. "Modos", Consulte ver. modo el en y tapa abierta modo el en de voz llamadas realizar Puede Pulse o cierre o para la tapa finalizar la llamada(o cancelar el intento llamada). de número. al llamar para Pulse Pulse número telefónico. el y área (omita el cerocomienzo alsi es necesario) de internacional), e ingrese el código del país, código carácter el veces para dos . pulse internacionales, llamadas Para pulse número, un eliminar Para área. de código el incluso standby, modo el en telefónico número el ingrese de voz, una Para llamada con lacomenzar tapa abierta, ud jsa lvlmncnlstca . o eltiene Si . teclas las con el volumen ajustar puede o volumen configurado como pulse llamada, una durante Sugerencia: + Para aumentar o disminuir el volumen volumen el o disminuir aumentar Para (reemplaza el código de acceso acceso de código el (reemplaza Silenciar micrófono Silenciar , aún , aún standby, pulse . Desplácese al número deseado y pulse pulse y deseado número al Desplácese . pulse standby, modo elen marcado, recientemente número a un llamarPara 1 Realizar llamadas de multiconferencia pulsada en el modo standby. También consulte "Desvío "Desvío consulte standby. el También en modo llamadas",246. pág.de pulsada voz de su buzón a llamar Para Contactos copiarlosnombres contactos de en su tarjeta SIM a de realizar poder Antes una llamada esta de forma, deberá el tipo de llamada . Seleccione voz de Llamada Para pulse llamar, lista. una en aparecen coinciden que contactos Los búsqueda. de en el campo del letras nombre primeras las ingrese seleccione desde llamada una realizar Para Llame al primer participante. para llamar al número. al llamar para servicios) y seleccione seleccione y servicios) de proveedor su por (provisto número el Ingrese Buzón voz y seleccione pulse voz, de buzón su Sugerencia: . Consulte "Copiar contactos", pág. 199. pág. contactos", "Copiar Consulte . Contactos . > Para cambiar el número telefónico de telefónico el número cambiar Para Opciones . Desplácese al nombre . al Desplácese deseado nombre o Aceptar (servicio de red), mantenga de mantenga (servicio red), > Contactos Cambiar número . us y , pulse Herram. . > 187 Realizar llamadas 188 Realizar llamadas 4 3 2 pulse . pulse activa, multiconferencia de llamada la finalizar Para seleccione y participante al Multiconferencia Para desconectara un participante, seleccione multiconferencia. de en multiconf. Incluir la conversación privada, seleccione seleccione privada, conversación la finalice Cuando de multiconferencia. con la llamada continuar dispositivo. Los otros pueden aún participantes su en retenida queda multiconferencia de llamada La Privada participantes, seleccione los de uno con privada conversación una mantener Para a usted. incluyéndolo participantes, seis de máximo un entre multiconferencia Incluir multiconf. en el paso 2 y seleccione repita llamada, a la participante un nuevo a agregar Para seleccione seleccione multiconferencia, de llamada la en participante primer al para incorporar llamada, la nueva contestan Cuando automáticamente. Nueva llamada Para llamar a otro participante, seleccione seleccione participante, a otro llamar Para . Seleccione un participante y seleccione seleccione y participante un Seleccione . Opciones . La primera llamada queda retenida retenida queda llamada primera La . > > Su dispositivo admite llamadas de de llamadas admite dispositivo Su Excluir participante para reincorporarse a la llamada llamada la a reincorporarse para Opciones Multiconferencia Opciones Excluir > > Multiconferencia Multiconferencia . Opciones . , desplácese , desplácese Opciones Opciones > Privada > > > > . etiq. voz seleccione y contacto de tarjeta escuchar la etiquetavoz de sintetizada, abra una Para contacto. de la tarjeta en guarda se que sobrenombre o nombre el es contacto un para voz de etiqueta La voz. de comandos los mejor reconocer para usuario voz del adapta a la se dispositivo el en voz de de reconocimiento hablada. de La función voz etiqueta la la con compara y contactos en voz para los ingresos de etiqueta genera una dispositivo elcambio, En adelantado. así hablante, no que que tiene grabar de voz etiquetas por la de del voz no dependen de mejorados voz comandos Los mejorados. voz de comandos los admite dispositivo Su por voz Marcación Herram. y seleccione pulse rápida, la activar marcación Para rápida Marcación marcación rápida (de a ), pulse y seleccione seleccione y y seleccione pulse telefónico ), número el asignar a Herram. (de rápida marcación de teclas las de una a telefónico número un asignar Para Activar áiay . y rápida Para llamar standby, en lapulse el tecla modo de marcación Asignar . . está reservada para el buzón de voz. voz. de está buzón para reservada el . > > . Marc. ráp. Marc. Config. > Llamadas Desplácese a la tecla a la que desea > Opciones accó rápida Marcación > Opciones Reproducir Reproducir > > primer número disponible de los siguientes: siguientes: los de disponible número primer el selecciona dispositivo el contrario, lo De configurado. fue si predeterminado, número el selecciona dispositivo el nombre, el mismo bajo números varios Si se guardan 3 Realizar una llamada usando una etiqueta de voz etiqueta una usando llamada una Realizar 2 1 voz. de la etiqueta pronuncie cuando usted de distancia corta una a dispositivo el Sujete uso. el está en voz, altavoz por la marcación usa Cuando Cancelar Siguiente Si reconocido el contacto no 2,5 segundos, el dispositivo marca el número. Pasados y número. nombre el y muestra dispositivo el en para el contactoreconocido en el idioma seleccionado una etiqueta sintetizada voz de El dispositivo reproduce contacto. la tarjeta en de está guardado que sobrenombre o nombre el claramente Pronuncie El dispositivo emite un tono breve y aparece y aparece breve tono un emite El dispositivo voz. por marcación la iniciar para tecla esta auricular un usando está Si . compatiblecon la tecla del auricular, mantenga pulsada pulsada mantenga standby, modo el en voz, por la marcación iniciar Para en la marcación por voz en todos los casos. los todos por voz en marcaciónla en emergencia, por lo que no debe confiar únicamente en un entorno ruidoso o situación una durante de Nota: para cancelar la marcación por marcación voz. cancelar para la parauna ver lista de otras coincidencias o El resultar de de voz puede etiquetas uso difícil es el correcto, seleccione es el correcto, Celular Hable ahora Hable , Celular . Teléfono (oficina) (casa) Cuando realiza una llamada de llamada una realiza Cuando ver. modo el use libres, manos video de llamadas Para 138. pág. "Modos", Consulte ver. modo el en realizar Puede de llamadas video elen tapa abierta modo y en redes los Estados Unidos de América. con de video no es compatible de llamadas La función Llamadas de video (servicio de red) Iconos: datos. o video voz, de activa pued se no video llamadas de Las realizar a un dispositivo móvil compatible o un cliente ISDN. puede se video llamada de La dos personas. entre video realizar de llamada puede una se Sólo de video. llamadas de servicios los a suscripción y disponibilidad sobre información más obtener para servicios de proveedor su a Consulte UMTS. red una de cobertura la de dentro estar y Pararealizar llamadas de video,debetener una tarjeta USIM video. recibe el que al destinatario muestra video capturada con la cámara de su dispositivo, se estáquien hablando. La imagen de video en vivo o de imagen con persona la y usted entre real tiempo en bidireccional , enviando video o la red no lo está transmitiendo). lo está no red o la video enviando está no receptor (el video recibiendo está no Celular (oficina) Celular . , Teléfono en con otra llamada en realizar video, puede ver un puede un video, video ver , Teléfono (casa) y

189 Realizar llamadas 190 Realizar llamadas imagen fija o gráfico de fondo gris. fondo de o gráfico fija imagen una ver puede y sonido el escuchará sólo caso tal en recibe la llamada puede que a video un y escucha sonido través del Laaltavoz. persona de dos imágenes ve cuando activa está video llamada de La hacer llamada una o enviar normal un mensaje de texto. dispositivo receptorcompatible) no es le pregunta se si desea ejemplo, red la las no admite llamadas de o video el (por video de imagen Esperando minutos. unos tardar puede video de llamada una Iniciar el ver modo después que el destinatario conteste la llamada. active libres, manos video de llamada una realizar Si desea 2 1 evideo de Llamar Seleccione Contactos o standby seleccione modo el en telefónico el número ingrese abierta, con la video, tapa de llamada una Para iniciar consulte "Configuraciones de llamada", pág. 239. de llamada", pág. "Configuraciones consulte una imagen enviar fija en lugar de un video, Para dispositivo. su de video de envío el ha denegado > . Llamada Llamada y un contacto. y un Opciones > ea levod ie ), ( video el de negar envío aparece. Si la llamada falló falló llamada la Si aparece. aafnlzrl lmd evdo us . pulse video, de llamada la finalizar Para información sobrecostos. video. Consulte a su proveedor de servicios para obtener más de una llamada como será lavideo, de llamada cobrada Auncuando deniegue el envío de video durante unallamada video que recibe y que envía, seleccione de imágenes las de pantalla la en ubicación la cambiar Para pantalla. la de superior la parte en aparece zoom de indicador El Para ampliar su imagen, seleccione seleccione su imagen, ampliar Para audio/video Enviando Activar seleccione sonido, escuchar sólo y video ver entre cambiar Para video", pág. 192. video", pág. "Compartir Consulte correcto. modo el activa usted y recibe el que la persona cuando compartir. El video compartido comienza automáticamente desea que videoclip o un vivo en video el a ver persona a la invitar que tiene Sólo voz. llamada de una durante compatible móvil dispositivo otro a móvil dispositivo su de Use Use América. de Unidos Estados los no video compartir La función Compartir video (s Video comp. Video o uat n lmd,ple . o pulse llamada, una durante Sugerencia: Desactivar para enviar video en vivo o un videoclip videoclip o un vivo en video enviar para Para aumentar o disminuir el volumen el volumen o disminuir aumentar Para > . Enviando video Enviando es compatible con redes en con redes es compatible video acepta la invitación invitación la acepta video ervicio de red) Acercar , Camb. orden imág. Enviando audio Enviando o Alejar . o • Asegúrese de que ambos, el que envía como el que que el como envía que el ambos, que de Asegúrese • y UMTS activa conexión una tiene que de Asegúrese • configurado esté dispositivo su que de Asegúrese • • Asegúrese de que que de Asegúrese • Video comp. y red al cargos asociados uso de Para aplicación. esta usar la de disponibilidad la sobre información más obtener para servicios de proveedor su con Comuníquese 3G. la red de de uso el UMTS, Debido a que a que Debido video compartir Requisitos para persona no puede aceptar la invitación. la aceptar puede no persona recibirá usted de un error mensaje que la indicando embargo, Sin una invitación. le enviando sabrá está que no la persona UMTS, red de la cobertura área de del no está dentro está apagado o la personade la persona el teléfono y video compartir para una sesión a a alguien Si invita UTMS. red la en registrados están recibe video, voz continúa. de llamada su pero de video, sesión la cobertura lade y pasared a UMTS una red GSM, se termina la de dentro está compartido mientras video de sesión una comienza pág. Si 191. "Configuraciones", Consulte UMTS. redde la cobertura de del área dentro está que pág.191. "Configuraciones", Consulte persona.a persona de conexiones para N93. Nokia debe hacer lo siguiente: lo hacer debe Video comp. Video comp. Video comp. Video requiere una conexión3G depende de la disponibilidad disponibilidad la de depende esté instalado en su en instalado esté Opciones Seleccione persona). para dicha tarjeta una nueva (o inicie contacto de tarjeta la y abra dispositivo su de principal menú Abra persona. la de contacto la tarjeta de Si sabe la dirección SIP de un destinatario, puede ingresarla en aire. el sobre configuraciones las enviarle puede servicios de proveedor Su dispositivo. su en guardarlas y SIP perfil de configuraciones las obtener proveedor servicios con su para de Comuníquese de videouna compartido. sesión recibir para establecido estar deberá también SIP El perfil compatible. teléfono otro con a persona persona de vivo en permite conexión Configurar una establecer un perfil SIP le en su dispositivo antes de que pueda usar usar pueda que de antes dispositivo su en SIP del perfil deben configuraciones Las estar configuradas (SIP). de sesión inicio de protocolo de conexión una como Una conexión de a sepersona conoce persona también a persona deConfiguraciones conexión persona Configuraciones • Comuníquese con su proveedor de servicios para para servicios de proveedor su con Comuníquese • siguiente: haga lo UMTS, conexión su configurar Para Configuraciones de conexión UTMS dominio). de nombre un de lugar en IP dirección una usar formato sip: nombredelusuario@nombrededominio (puede establecer un acuerdo para usar la red UMTS. red la para usar acuerdo un establecer > Agregar info. Agregar > SIP . Ingrese la dirección en el en dirección la Ingrese . Video comp. Contactos e el en . 191 Realizar llamadas 192 Realizar llamadas 1 Videovivo en UMTS. red la de cobertura de área del estar dentro y activa UMTS conexión una tener al servicio, registrado estar beberá video, compartir para recibir invitaciones Para servicio antes de que comenzar puedan a compartir video. en el estar registrados deberán video recibe el que persona y la Usted compatible. móvil dispositivo su en necesarios instalardeberá destinatario video el compartido, de una sesión Para recibir Compartir video de punto de configuraciones las que de Asegúrese • 2 Opciones seleccione voz activa, de llamada una tiene Cuando pág."Conexión", 240. debidamente configuradas. Para obtener ayuda, consulte estén dispositivo su en UMTS conexión la para acceso enviar la invitación. la invitación. enviar Seleccione SIP. dirección una ingrese Si laSIP dirección de la persona disponible, no está y invitación la enviar desea a SIP cual la dirección la seleccione contacto, de Si el destinatario tiene varias direcciones SIP en la tarjeta tarjetaagregó a la contacto de del destinatario. a SIP que la dirección la envía invitación El dispositivo > Video comp. Video Compartir video Compartir Selecc. y configurar los ajustes ajustes los y configurar para enviar la invitación. invitación. la enviar para > Video en vivo en Video Aceptar para . 3 2 1 Videoclip 5 4 3 Seleccione Seleccione seleccione seleccione una vista previa.Para ver una vista previadelclip, desea un videoclip que Seleccione compartir. Se abre Se abre lista una de videoclips. agregó a la tarjeta de contacto del destinatario. envía SIP El a la la invitación que dispositivo dirección Seleccione convertirse compartir. ¿Continuar? para compartirlo. para admitido formato Es que el quetenga posible convertir videoclip en un Opciones voz activa, seleccione de llamada una tiene Cuando Parar seleccione Para finalizar compartido, de video la sesión sesión. la Seleccione compartido. Seleccione vivo. en video comparte compatible paracontinuar su llamada devoz mientras El altavoz está activo. puede También unusar auricular la invitación. acepta video el recibe que la persona cuando automáticamente comienza compartido video El aafnlzrl lmd evz us . pulse voz, de llamada la finalizar Para . > Opciones Opciones Aceptar Pausa Compartir video Compartir para detener la sesión de video video de la sesión detener para . > > Reproducir Invitar Continuar > . Clip para seguir con con seguir para . . Clip debe debe Clip aparece. 6 5 4 • seleccionar: puede invitación, una reciba Cuando invitación. una recibió que no sabrá UMTS, la red de cobertura área de del dentro está y no video compartir para una leinvitación envía Si alguien como SIP. y su dirección configurado Si su no está dispositivo aparece un mensaje de invitación con el nombre del remitente video, compartir para invitación una envía le alguien Cuando Aceptar una invitación Parar Para de la video finalizar seleccione compartido, sesión video. el compartiendo continuar Seleccione compartido. Seleccione la persona recibe el que acepta la video invitación. cuando automáticamente comienza compartido El video invitación. la enviar Seleccione SIP. dirección una ingrese disponible, está no la persona de SIP Si la dirección enviar la invitacióny de seleccione contacto, la dirección SIP a la cual desea tarjeta la en SIP direcciones varias tiene destinatario el Si el modo ver. modo el active vivo, en video compartir desea remitente Si el Aceptar Silencio aafnlzrl lmd evz us . pulse de voz, la llamada . Para finalizar para comenzar la sesión de video compartido. compartido. video de la sesión comenzar para , éste suena cuando recibe una invitación. una recibe cuando suena éste , Pausa la de detener para sesión video Selecc. Opciones para enviar la invitación. invitación. la enviar para > Continuar Aceptar para para para iestá ocupado Si para rechazarla. El llamante escucha un tono de función la ha activado Si ocupada. línea pulse contestar Si no desea la llamada, tapa el abierta,en modo "Desvío "Desvío de pág. llamadas", 246. Consulte llamada. la desviará también entrante llamada finalizado entrante, seleccione seleccione entrante, llamada una hay cuando de timbre tono el . silenciar Para y pulse la tapa abra modo, otro De automáticamente. y tapa se conecta la llamada el llamada en una contestar Si comparte un videoclip, seleccione Para finalizarla de sesión video compartido,seleccione 7 aacnetrl lmd ne ootp bet,ple . Si pulse abierta, tapa en el modo la llamada contestar Para llamada una o rechazar Contestar Contes. si tapa abierta tapa si Contes. También puede pulsar para rechazar la sesión de sesión rechazar la para voz. de la llamada y desconectar compartido video pulsar puede También que us indicando mensaje un Rechazar una llamada, pulse la tecla del auricular. del tecla la pulse llamada, una al y finalizar contestar para conectado dispositivo, Sugerencia: aparece. para rechazar la invitación. la remitente rechazar El para recibe para desviar llamadas, al rechazar una rechazar una al desviarpara llamadas, Si tiene un auricular compatible compatible un auricular Si tiene Silencio está programado en en está programado modo tapa cerrada, abra la abra cerrada, tapa modo . ted rechazó la invitación. rechazó ted la invitación. Salir . Video compartido compartido Video Desvío llam. Sí , para , para Parar > . 193 Realizar llamadas 194 Realizar llamadas video. Para reemplazar la pant video. Para reemplazar de imagen una de lugar en gris pantalla una muestra Se persona. la otra a podrá escuchar sí pero enviar video, podrá no ver, el modo activa Si no de video. imagen la enviar desea que la dirección en la cámara gire vivo, en de video imagen una enviar desea Si llamante. del dispositivo elen aparece dispositivo su de la cámara con capturando está grabado o la de videoclip que imagen video vivo, imagen en Para acomenzar compartir video, active el modo y ver una la para contestar video. de llamada abierta, tapa pulse modo En el . Cuando recibe una llamada de video, aparece video de Contestar o rechazar una llamada Seleccione llamada. la contestar puede no cual la por razón la informándole llamante al de texto mensaje un enviar puede también Cuando rechaza una llamada entrante con la tapa abierta, "Configuraciones de llamada", "Configuraciones pág. 239. consulte estándar, de texto un mensaje escribir y opción esta Para configurar enviarlo. de antes el texto Personalizar Herram. llamadas las para Sugerencia: > Modos Opciones > Puede asignar un tono de timbre timbre de tono un asignar Puede Tono llamada video Tono llamada de video. Pulse y seleccione seleccione y Pulse video. de , un perfil y perfil un , alla gris con una imagen fija, fija, imagen una con gris alla > Env. mens. Opciones . Puede editar editar Puede > incluyendo las siguientes opciones: opciones: las siguientes incluyendo dispositivo, su en disponibles opciones las para llamada una Seleccione de red. servicios son llamada La mayoría de que usar puede durante las opciones una una llamada Opciones durante Llamadas activado ha si en curso otra tiene mientras llamada una contestar Puede red) de (servicio espera en Llamada . tapa abierta, pulse vi de llamada la finalizar Para costos. sobre información más obtener para servicios de proveedor a su Consulte video. de llamada una como cobrada será llamada la video, llamada una de video durante no envíe cuando Aun video llamada", de "Configuraciones consulte llamada activa, pulse . Para finalizar ambas llamadas, llamadas, ambas finalizar . Para seleccione pulse activa, llamada ambas de para desconectarse y activa llamada una con espera en llamada o una entrante Seleccione Para alternar entre las dos llamadas, pulse primera . La retenida. es llamada pulse en espera, llamada la contestar Para pág. 239. pág. > Opciones Opciones Llamada en espera Llamada en espera Llamada > > Transferir Finalizar todas Finalizar deo, en el modo ver o con la con o ver modo el en deo, llamadas. Para finalizar la la finalizar Para llamadas. para conectar una llamada llamada una conectar para . en Herram. . Opciones Imagen en llam. llam. en Imagen Cambiar > Config. durante durante . > repetidamente. Seleccione Seleccione repetidamente. de espera ( espera de Finaliz. llam. activa Bluetooth). conectividad con compatible un auricular conectado tiene Activar opciones: las siguientes de alguna Activar altavoz Activar Bluetooth). conectividad con teléfono Activar ver). modo el en o ambos audio video, Seleccione Opciones durante una llamada de video o en DTMF búsquela Ingrese una contraseña. la ejemplo, de tonos secuencia Enviar DTMF archivo a un para enviar el compatible. dispositivo antes de enviarlo. Pulse la Puede editar elllamada. ymensaje cambiar el destinatario de participante a otro multimedia mensaje un en video un Enviar MMS espera. en llamada la contestar al cambiarla y cambiar Colgar o tarjeta de contacto. contacto. de tarjeta campos campos Sugerencia: Desactivar w Opciones (sólo en redes UMTS): para enviar una imagen o o imagen una enviar para UMTS): redes en (sólo ) o un carácter de pausa ( pausa de carácter ) o un : para enviar secuencias de tonos DTMF, por por DTMF, tonos de enviar secuencias : para (solamente modo tapa abierta y si y si tapa abierta modo (solamente Número de teléfono de Número (si tiene conectado un auricular auricular un conectado tiene (si : para finalizar una llamada activa y y activa llamada una finalizar para : agregarPuede DTMF tonos a los durante una llamada de video para video llamada de una durante Contactos en el(sonidos modo tapa abierta, Aceptar .Para ingresar un carácter para enviar el tono. el enviar para o p ,ple ), pulse DTMF en una una en epáeehsae vnoyple . y pulse evento el hasta desplácese lista Borrar Opciones Para eliminar todas las listas de llamadas recientes, seleccione decobertura la red. de la dentro si está y encendido está el dispositivo funciones, estas admite red la si solamente recibidas y perdidas Registro bae eitoqedsabra seleccione y borrar desea que registro el abra últimas llamadas. Para borrar uno de los registros de llamadas, Acercar imág. orden Camb. recibidas y marcadas, pulse y seleccione seleccione y pulse y marcadas, recibidas Para registrar los númerostelefónicos de llamadas perdidas, Últimas llamadas pulse . pulse y número o nombre un a desplácese llamada, la llamadasacceder a la lista perdidas. de Para devolver seleccione perdidas, llamadas sobre Sugerencia: o > > Registro Alejar Últimas llam. Últimas .Para borrar un evento, abraunregistro, Borrar últimas llam.Borrar últimas (solamente modo ver). modo (solamente en ve nota una elCuando modo standby El dispositivo registra llamadas llamadas registra El dispositivo en la vista principal de principal vista la en Mostrar Personal Opciones para para > > 195 Realizar llamadas 196 Realizar llamadas Iconos en en Iconos de comunicación Registrar eventos Personal y seleccione de paquete deconexiones datos, pulse durante y recibidos enviados datos de la cantidad Para verificar de Paquete datos Configuraciones llamada activa, seleccione Para configurarladuración pantallamostrarpara la con una Registro y seleccione pulse y salientes, entrantes llamadas sus de aproximada duración la registrar Para Duración de llamadas consulte "Seguridad", pág. y "Seguridad", "Teléfono 243. SIM", consulte Poner cont. cero a seleccione llamadas, de la duración borrar Para eú acnia edtsevao recibidos. y enviados datos de cantidad la según paquete de datos podría cobrar por de las conexiones entrante, facturación, los impuestos, etc. los impuestos, facturación, la de redondeo el de red, servicios los según variar puede y servicios las llamadas para servicios Nota: > > Registro Duración llam. Registro El tiempo real facturado por su proveedor de de proveedor su por facturado real El tiempo > . Para esto necesita el código de bloqueo, bloqueo, de código el necesita esto Para . : Mostrar durac. llam. durac. Mostrar > Paquete datos Paquete Personal > Registro . Por ejemplo, se le se ejemplo, . Por > Personal Sí > Opciones Opciones o No . > > > seleccione seleccione , pulse dispositivo, de datos registrados por el mensajes de texto o conexiones video, voz y de llamadas Para monitorear todas las informaciónregistro. del evento y crear tarjetas de contactos nuevas basadas en la Puede filtrar el registro general para ver sólo un tipo de acceso. de punto o servicios de proveedor del nombre destinatario, número telefónico, nombre del remitente o el ver podrá comunicación, de evento el seleccionar para registro general. Para cada pulse y eventos de comunicación perdidos de comunicación eventos saliente, pulse pulse y Sugerencia: seleccione llam. durac. Mostrar activa, seleccione pr la pantalla voz en de Sugerencia: Personal Para ver una lista de mensajes enviados, > Para ver la duración de una llamada una de duración la Para ver Registro Opciones > Mensajes

incipal durante una llamada llamada una durante incipal Sí . > Configuraciones > Enviados . > Para programar la Para programar . pulse Sí mensajes, seleccione de entrega de informes e recientes llamadas de registro el contenido del registro, Para permanentemente borrar filtro. un Opciones seleccione registro, el filtrar Para datos. de de paquete conexiones como muestran se Web páginas o multimedia mensajería de centro correo, de como un evento decomunicación. Las conexiones al buzón registrados son datos, de paquete de y conexiones parte una Los subeventos, como mensajes de texto enviados en más de mensajes se eliminan permanentemente. se eliminan mensajes de entrega de informes e recientes llamadas de registro selecciona Si en la memoria. para liberar espacio automáticamente borrados son después días y de fija cantidad una por del dispositivo la memoria en quedan del registro eventos Los para confirmar. Para retirar un solo evento del registro, registro, del evento solo un retirar Para confirmar. para > Configuraciones Ningún registro Ningún Duración del registro del Duración Opciones , todo el contenido del registro, registro, del contenido el todo , > > Borrar registro Duración del registro del Duración Opciones , seleccione , seleccione > Filtrar . Seleccione y . por indicado saliente o entrante a evento un desplácese datos, de paquete de conexión de una la duración y kilobytes ha en se se mide transferido, información verpara cuanta Contador de paquetedatos de ycronómetro de conexión . pulse y evento a un desplácese general, registro de vista Para ver los detallesevento de de comunicación, un la en Paq. Opciones seleccione al portapapeles, telefónico número un Sugerencia: y seleccione seleccione y > Copiar número Copiar En la vista de detalles, para copiar detalles, de la vista En Opciones > e detalles Ver . . : 197 Realizar llamadas 198 Contactos (directorio) Opciones seleccione y editar desea que contacto de la tarjeta a Para editar tarjetas de contacto en en contacto de tarjetas editar Para compatibles. dispositivos de recibir o enviar puede se sólo contacto de información La 179. pág. configuraciones", y "Datos Consulte contactos. sus a negocios) (tarjetas de recibida de contactos información a la agregar vez. Puede a destinatarios varios e-mail contacto, los cuales le permiten enviar mensajes de texto o de grupos crear a una miniatura detarjeta contacto. Puede en imagen una o personal timbre de tono un agregar 2 1 y números nombres Guardar seleccione y Pulse Rellene los campos que desee y seleccione seleccione y desee que campos los Rellene Seleccione Opciones seleccione 8150), o HP Photosmart 450 Deskjet HP móvil la impresora (como Bluetooth conectividad (BPP) con impresión de básico perfil con equipada compatible impresora una en Sugerencia: Contactos (directorio) > Editar Opciones > . Imprimir Para imprimir tarjetas de contactos de contactos tarjetas imprimir Para Contactos > Nuevo contacto . . En . En Contactos Contactos . , desplácese Hecho puede puede . Para borrar una tarjeta de contacto en en contacto de tarjeta una borrar Para Opciones seleccione y contacto de tarjeta la abra contacto, de tarjeta a una en miniatura una imagen adjuntar Para pulse y los contactos marcar para y pulse la a vez, . Para borrar varias tarjetascontacto de una tarjeta y pulse aimagen en miniatura aparece cuando el contacto llama. La para borrar. para en Nokia PC Suite. Suite. PC Nokia en disponible Editor Contacts Nokia utilice contacto, Sugerencia: multimedia á.217. pág. datos", 173 y "Enviar pág. "Mensajería", Consulte Opciones Seleccione enviar. desea que la tarjeta seleccione Sugerencia: 188. rápida", pág. "Marcación Consulte telefónicos. números ocho a rápida marcación con más frecuencia. Podrá asignar teclas de utilizados telefónicos números los a llamar de rápida Sugerencia: > Editar > > , Enviar Para enviar información de contacto, contacto, de información enviar Para manera una rápida es La marcación Vía Bluetooth Para agregar y editar tarjetas de de tarjetas editar y agregar Para Opciones > Vía mensaje corto Vía mensaje > Agregar miniatura Agregar o Contactos Vía infrarrojos Vía , seleccione seleccione , , Vía . . Información Contactos Información dispositivo, pulse y seleccione y seleccione Contactos SIM pulse dispositivo, tarjeta una desde SIM a su y números Para copiar nombres contactos Copiar 2 1 usa se también predeterminado El número específica. dirección o número a un mensaje un fácilmente enviar o podrá llamar o direcciones, números si varios eltiene forma, De esta contacto contacto. tarjeta de una Puede númerosasignar y direcciones predeterminados a predeterminados y direcciones Números en disponible memoria y grupos contactos, de la cantidad Para ver 200. pág. contacto", de "Crear grupos Consulte a grupo:Agregar Para agregar un contacto a un grupo, seleccione que que copiar y desea en latarjeta de contacto. aparece subrayado predeterminado número o La dirección 4 3 ne ietro eecoeu otcoyple . Seleccione pulse y contacto un seleccione directorio, el En como predeterminado. configurar que desee o dirección un número Seleccione y seleccione o dirección nombre un desea agregar que al predeterminado un Seleccione Contactos Opciones > (sólo aparece si ha creado a un grupo). grupo). un a ha creado si aparece (sólo Directorio SIM Opciones . , seleccione seleccione , > Predeterminados >

Copiar a Contactos Copiar para la marcación por voz. marcación para la Contactos . Seleccione los nombres nombres los . Seleccione Opciones Asignar > . Opciones Opciones > . . > > Pulse y seleccione y seleccione Pulse proveedor. otro u servicios de proveedor su ser puede Este SIM. tarjeta su el proveedor de con comuníquese SIM, de tarjetas servicios los de uso y disponibilidad sobre información obtener Para SIM y servicios Directorio telefónicos específicos, seleccione seleccione específicos, telefónicos números a dispositivo su de llamadas las restringir Para SIM la admite. tarjeta si la sólo aparece configuración Esta Opciones seleccione fija, marcación de números de lista la ver Para llamadas. realizar y a contactos números o copiar agregar, editar podrá en la tarjeta guardados SIM directorio En SIM. el números marcación fija, seleccione seleccione fija, marcación marcac. fija SIM Contactos Copiar copiar y y seleccione Para en su tarjeta SIM, contactos copiar pulse SIM tarjetacontacto de que admite la tarjeta SIM. . Se necesita el código PIN2 para estas funciones. estas para PIN2 el código necesita Se . > PC compatible con Nokia PC Suite. Suite. PC Nokia con compatible PC Sugerencia: Opciones Al directorio SIM directorio Al > Contactos Contactos SIM Contactos . Para agregar nuevos números a la lista de de lista la a números nuevos agregar Para . > Directorio SIM Directorio > Puede sincronizar sus contactos a una a una sus contactos sincronizar Puede Copiar a direct. SIM direct. a Copiar . Seleccione los nombres que desea . Seleccione los nombres Contactos Opciones . Sólo copia los campos de la de campos copia los Sólo . > Contac. marcac. fija marcac. Contac. paraver losnombres y > Opciones Opciones > Nuevo contacto contacto Nuevo u Opciones > > Activar Activar . > 199 Contactos (directorio) 200 Contactos (directorio) de la lista de tonos lista de tonos de la timbre. de Para borrar el tono de timbre, seleccione 3 2 1 reconoce). lo dispositivo y su llamada la con envía se llamante del telefónico número el (si seleccionado timbre de tono el reproducirá dispositivo el llame, le grupo un de o miembro contacto un Cuando contactos para timbre de tonos Agregar Al usar nsu dispositivo. en programado emergencia de oficial al número llamadas Cuando la marcación fija está activada, pueden efectuarse fija. marcación de lista la en incluidos estar deberán del destinatario telefónico número el y mensajes de centro del el número caso,este En datos. de paquete de conexión una texto por de de paquete cuando envía excepto mensajes datos, de contacto o grupo seleccionado. grupo o contacto el para usar desea que timbre de tono el Seleccione de timbre. tonos de Seleccione para abrir contacto. tarjeta una de de contacto o grupo un ir a la seleccione y grupos de lista Pulse Marcación fija Marcación Opciones , no es posible hacer conexiones conexiones hacer , es posible no > Tono de timbre de Tono Tono predeter. . Verá una lista lista una Verá .

2 1 Eliminar miembros de un grupo 2 1 de contacto Crear grupos 3 4 3 6 5 Renombrar Para dar a nombre otro un grupo, seleccione Eliminar de grupo de Eliminar seleccione y contacto al Desplácese modificar. desea que grupo abra el de grupo, lista En la Seleccione En Seleccione Seleccione Abra el grupo yseleccione predeterminado nombre el use o grupo el para nombre un Escriba Seleccione Seleccione agregar. desea que contactos los todos en procedimiento marcarlo. para este repita la vez, a miembros Para agregar múltiples pulse y contacto un a Desplácese Contactos Opciones y seleccione al contacto desplácese contacto, el Sugerencia: , ingrese el nuevo nombre y seleccione Aceptar Opciones Sí para borrar el contacto del grupo. del el contacto borrar para , pulse para abrir la lista de grupos. de la lista para abrir , pulse > Grupo Pertenece a grupos Para verificar a qué grupo pertenece grupo Para a qué verificar . para agregar al contactos los grupo. agregar para > y seleccione seleccione y Nuevo grupo Nuevo Opciones > Agregar miembros Aceptar Opciones . . Opciones . Aceptar > > . . información, comuníquese con su proveedor con su proveedor de servicios. comuníquese información, más obtener Para 179. pág. y configuraciones", "Datos ofrezca la de que Consulte servicios proveedor Web. página del especial texto de mensaje un en configuraciones las recibir Puede usar. desea que para la página Web servicio de las configuraciones necesita a páginas, acceder Para Web acceso de Punto Pulse y sus servicios. el uso de sobre instrucciones las seleccione darán le también servicios de proveedores Los servicios. de proveedor con su comuníquese y tarifas, precios servicios, de la disponibilidad sobre información obtener Para hipertexto (HTML). de marcado de o lenguaje (XHTML) hipertexto de de marcado extensible lenguaje (WML), inalámbrica telefonía para marcado de lenguaje el usan páginas Estas móviles. dispositivos para diseñadas específicamente Varios proveedores de se eservicios. de proveedor en eldisponibles sitio de Web su Sugerencia: standby. modo el en pulsada mantenga directo: Acceso Servicios Las configuraciones puedenestar Servicios para iniciar una conexión, conexión, una iniciar para rvicios mantienen páginas mantienen rvicios . Ingresar las configuraciones manualmente configuraciones las Ingresar de acceso predeterminado. acceso de Internet. de sitio otro con cualquier haría tal como contenido, y seguridad a en cuanto precauciones mismas las tomar ellos, deberá a accede sitios. Si estos ni respalda garantiza no Nokia Nokia. con asociados están no que sitios algunos de favoritos cargados algunos tener puede El dispositivo a accede cuando abre se favoritos de vista La Favoritos de Vista 3 2 1 Configuraciones seleccione predeterminado, acceso de Para configurar el punto de acceso creado como el punto seleccione y Pulse 240. proveedorde servicios. pág. Consulte "Conexión", su por facilitadas instrucciones las Siga acceso. de punto Puntos de acceso , Pulse seleccione anotaciones el punto de acceso actual. acceso de punto el parael favorito y la direcció indica la página de inicio definida por el punto > Agregar favorito Agregar > y defina las configuraciones paraun Punto de acceso Herram. Servicios n de la página definida para definida la página n de > Config. > . Escriba un nombre nombre un Escriba . Opciones . Opciones > Conexión Servicios > Admin. Admin. > > . 201 Servicios 202 Servicios Seguridad de conexión de Seguridad Explorar Seleccione contenido. de servidor y el gateway el entre datos de transmisión la asegura servicios de proveedor El segura. sea solicitado) recurso el almacena se donde lugar el (o contenido de servidor y el gateway el entre establecida datos de la transmisión que no indica seguridad de icono El servidor de Internet queda encriptado. o la conexión, aparece durante de entre datos y elel ladispositivo transmisión gateway seguridad Si el de indicador adrcine lcmo(). ( campo el en dirección la ingrese o favorito un seleccione página, una descargar Para ecriiao" á.245. pág. de certificados", "Administración consulte También de servicios. proveedor su con comuníquese servicio, este sobre información más obtener Para bancarias. los de cuentas para como servicios, ciertos para seguridad de certificados requerir Se pueden usuario. y servidor del autenticación la sobre información e encriptación de estado la conexión, sobre detalles software perjudicial. software contra protección y adecuada seguridad ofrecen Importante: Opciones Use sólo los servicios fiables y que y que fiables servicios los sólo Use > Detalles > Seguridad para ver ver para Opciones seleccione Para a retroceder la página anterior la exploración, durante . pulse y seleccionar, enlaces abrir Para marco azul. un alrededor tienen enlaces de sirven que imágenes Las en violeta. previamente, azul y los visitados en enlaces una En Web, página los enlaces nuevos aparecen subrayados seleccione servidor, del reciente más contenido el obtener Para exploración. de sesión una durante visitado ha que las páginas de cronológica lista Opciones Para guardar página una explora, mientras seleccione como fav. guardar seleccione favorito, un Para páginas en otro momento, pulse en la vista de favoritos favoritos de la vista en la vista abrir para pulse momento, otro en páginas las a acceder Para desconectado. está cuando explorarlas tarjeta de memoria compatiblehay (si una insertada) y páginas guardar en o del dispositivo memoria la en una áiay al inicio. página y directo: Acceso Opciones . seleccione explorador, del la vista a volver Para pulsada mantenga explorando, esté cuando Sugerencia: > > Opciones Atrás Opc. navegación Opc. avanzadas Opc. . Si . Si > Páginas guardadas > Volver a página Para acceder a la vista de favoritos favoritos de vista la a acceder Para Atrás Opc. navegación Pulse para ir al final de una una de final al ir para Pulse no está disponible, seleccione seleccione disponible, está no > > Guardar página Guardar Historial . Opciones . > agrd nuevo de Cargar para ver una > . Puede Guardar Guardar . guardarse en en guardarse por dispositivo, foto una ejemplo, descargada puede en su respectivas por las aplicaciones son manejados gratuitosser pueden o con costo. Los descargados elementos elementos Estos y videoclips. temas del operador, logotipos imágenes, de timbre, como tonos descargar elementos Puede elementos comprar y Descargar Opciones seleccione URL, dirección nueva Para ingresar una borrar descargas completas. completas. descargas borrar o abrir, guardar reanudar curso,cancelaro o en descargas seleccione y elemento Herramientas seleccione lista, la ver Para actual. exploración de la sesión de completas y interrumpidas proceso, en empezarAl una descarga, aparecerá una lista de descargas . pulse y enlace al desplácese elemento, un Para descargar videoclips. y temas operador, de logotipos delpágina explorador, de como tonos timbre, imágenes, la en aparecer pueden no que descargar Puede archivos prueba de Java Verified deprueba la pasaron que o las Symbian aplicaciones las como seguridad, ofrecen que fuentes de software y Importante: > Opc. navegación Galería > Descargas Instale y utilice sólo las aplicaciones aplicaciones sólo las y utilice Instale . Opciones . En la lista, desplácese a un a desplácese lista, la En . > TM para hacer una pausa, pausa, una hacer para Ir a dirección Web a dirección Ir . Opciones . > contraseñas, vacíe la memoria caché después de cada uso. uso. cada de después caché memoria la vacíe contraseñas, exige que confidencial a información ha accedido acceder o intentado Si ha forma temporal. para en guardar datos La memoria caché es una parte de la memoria que se emplea dispositivo. del caché memoria la en guardan se accedido ha cuales los a servicios o información La Vaciar la memoria caché seleccione explorador, Desconectar seleccione conectado, estar Para finalizar la conexión y ver la página de exploración sin conexión una Finalizar 3 2 1 Para cancelar la descarga, seleccione seleccione descarga, la cancelar Para seleccione descarga, la con continuar Para provista. información la toda detenidamente Lea "Comprar". ejemplo, por la opción apropiadaSeleccione para comprar el elemento, pulse . y al enlace desplácese elemento, descargar el Para prueba de Javaprueba Verified la pasaron que o las Symbian aplicaciones las como seguridad, que ofrecen de fuentes software y Importante: o para finalizar la conexión y cerrar el el cerrar y la conexión finalizar para o Instale y utilice sólo las aplicaciones aplicaciones las sólo y utilice Instale Opciones Opciones TM > . Salir > Opc. avanzadas . Cancelar Aceptar . . > 203 Servicios 204 Servicios Seleccione Seleccione Web Configuraciones Opciones almacenan en ella.Para vaciarla memoria caché, seleccione La información o los servicioslos aque accedido ha se la vista de favoritos, seleccione seleccione favoritos, de vista la de carpeta la ocultar desea pero automáticos, favoritos derecopilando favoritos. Si continuar automática desea Anotaciones auto. el idioma. según codificación otra seleccionar puede correctamente, Codificación predet. letra de Tamaño Opciones seleccione exploración, la durante momento otro en selecciona Si explora. mientras imág./obj. Mostrar o editarlos retirarlos. crearlos, cambiarlos, pueda no que posible y es de servicios proveedor por su dispositivo su en preconfigurados estar pueden de accesos todos los puntos o Algunos 240. pág. "Conexión", Consulte acceso de Punto opciones: siguientes > > Opciones Opc. avanzadas Opc. Mostrar imágenes Mostrar : cambie el punto de accesopredeterminado. de punto cambie el : : seleccione el tamaño del texto. el tamaño : seleccione : active o desactive la recopilación recopilación la o desactive : active : seleccione si desea cargar imágenes imágenes cargar desea si seleccione : : si los caracteres del texto no aparecen > Configuraciones > orrcaché Borrar . No Ocultar carpeta ,cargar para imágenes y alguna de las de y alguna . . descargadaselecciona cuando búsqueda de Página inicio de Página completa Pantalla explorando: está cuando aparezca Tamaño de pantalla seleccione seleccione modo elen está cuando página la de Entrega volumen. de páginas las en incorporados Volumen búsqueda páginas externas de estilo cascada, seleccione seleccione cascada, de estilo externas páginas á.194. pág. También consulte llamada", una durante "Opciones que el teléfono tonos envíe llamada DTMF durante una de voz. deConf. envío DTMF seguridad. de seguridad de Adv. Java/ECMA Script Cookies : active o desactive la recepción y envío de cookies. y envío la recepción : o desactive active : si desea ver el formato más exacto posible posible exacto más formato el ver desea si : : si quedesea el explorador reproduzca sonidos en la vista de favoritos o durante la exploración. la durante o favoritos la de vista en Por calidad Por : defina la página de inicio. de página la defina : : oculte o muestre las notificaciones notificaciones las o muestre oculte : : active o desactive el uso de scripts. uso el o desactive : active . : seleccione si desea confirmar antes de : seleccione lo que desea que que desea que lo : seleccione : defina una página Web que es que Web página una defina : . Si no desea que se descarguen descarguen se que desea Si no . Web, seleccione un nivel nivel un seleccione Web, Opc. navegación Opc. Sólo teclas selec. teclas Sólo Pantalla pequeña Pantalla Por velocidad > Abrir pág. o , . y para mantener un registro de sus tareas y otras notas. de sus tareas un registro y para mantener 1 Crear entradas de la agenda la de entradas Crear la Utilice para un día un para Memorándum dispositivo) el en correo de buzón definirse (debe un e-mail por de reunión solicitud una enviar para reunión de Solicitud específicas hora y con fecha cita una Reunión opciones: siguientes las de Nueva entrada Agenda Pulse y seleccione vistatareas,de se abre una entrada de tarea. el gna us ulue el ). ingresa se agregan que — abre una entrada de reunión loscaracteres y Se de la agenda, tecla cualquier pulse ( Acceso directo: Agenda Agenda : para recordarle recordarle : para > Opciones paraque lerecuerde reunionesy aniversarios : para escribir una entrada general general entrada una : escribir para y alguna en la vista diaria, semanal o mensual > :

al campo al Asunto . En la. En 2 3 seleccione seleccione pausa,una haga para que la alarmaPara programar seleccione agenda, la de alarma la finalizar Para la pantalla. en queda recordatorio textoEl del agenda. la seleccione Cuando lala alarma agenda de se activepara nota,una seleccione seleccione programar alarma, una Paracampos. los Complete realizar en una fecha específica Tarea anualmente) repiten se entradas (las especiales Opciones seleccione cita, para una descripción agregar una Para alarma Aniversario Para guardarPara la entrada, seleccione deseada dedeseada la opción agenda, configure de entrada una crear Al Suite. PC Nokia usando compatible PC Sugerencia: : para recordarle de una tarea que necesita necesita que tarea una de recordarle para : y Pausa Silencio Día de alarma > Alarma : para leque recuerde Agregar descripción Agregar . para apagar para eltono de alarma de Sincronización Puede sincronizar su agenda con una > Activar . e ingrese la la ingrese e .

. cumpleaños o fechas fechas o cumpleaños Hecho Hora de de Hora . Parar . 205 Agenda 206 Agenda Solicitudes de reunión de Solicitudes Vistas de la Vistas agenda reunión elusando e-mail, seleccione correo o en la agenda. Pararesponder a una solicitud de de buzón el en recibidas reunión de solicitudes las ver Puede el e-mail. abre cuando la agenda en guarda se la solicitud dispositivo, del correo buzón de el en de reunión solicitud Si recibe una seleccione seleccione compatible, dispositivo un a agenda de nota una Para enviar fecha a Ir Para ir a fecha una seleccione específica, . pulse de tareas, y diaria semanal, mensual, vistas las entre alternar Para a.m. 8 las de antes ubicados quedan derecha. En la vista semanal, ylos recordatorios aniversarios inferior la esquina en pequeño triángulo un con marcadas son de agenda con entradas fechas las mensual, En la vista Sugerencia: cuando abre la agenda. abre cuando aparece que o la vista la semana día de Configuraciones aai ldaata,ple . . Para ir al día actual, pulse Opciones Seleccione Seleccione > Enviar para cambiar el primer para cambiar . Opciones Opciones Opciones > > Responder: > . Opciones La semana comienza Para modificar de la agenda Configuraciones Antes de fecha y seleccione mensual vista a la desplácese a la vez, evento un de más borrar Para dispositivo. del memoria en vencidos ingresos Borrar de la agenda entradas sus Administrar Marcar como hecha y seleccione tareas de lista la en actividad la a desplácese completado, haya tarea que una marcar Para 450 o HP Photosmart seleccione 8150), Deskjet conectividad Bluetooth (como la impresora móvil HP compatible equipada con perfil básico de impresión (BPP) con impresora una en agenda de entradas imprimir Para > Configuraciones Tono alarma agenda Tono o Todas las entradas Todas . y Opciones Título vista semana vista Título Agenda . > Eliminar entrada Eliminar , Vista predeterminada ahorra espacio en la en espacio ahorra Opciones . , seleccione , seleccione Opciones > Imprimir > > , . • Debe definirse un punto de acceso Internet para para Internet acceso de punto un definirse Debe • proveedor o red de operador el y escucha que estación La • válida. SIM tarjeta una insertada tener debe dispositivo El • El debe dispositivo encendido. estar • siguiente: lo necesita Radio, Visual el servicio usar Para admitan Visual Radio. no área su en de radio estaciones y operadores los que posible Radio, es Visual de al servicio acceso no tiene Si otrasusa aplicaciones. mientras FM radio la escuchar Puede red). de (servicio datos paquete de de programa radio. VisualEl servicio Radio usa al asociada pantalla la en visual información la ver puede sintonizaestaciones que ofrecen el servicio de Visual Radio, Si guardadas. y estaciones automática sintonización con FM radio una Radio como Visual la aplicación usar Puede servicios. Consulte "Puntos de acceso", pág. 240. pág. acceso", de "Puntos Consulte servicios. acceder al servidor Visual Radio del proveedor de de servicios móviles que usa deben admitir este servicio. Visual Radio (servicio de red) (servicio Radio Visual Personal éeocolgar. déjelo que modo de la radio, de la antena como funciona al auricular conectado dispos el auricularcompatible. Cuando usa el altavoz, mantenga un o altavoz incorporado el con la radio escuchar Puede dispositivo. al compatible cone preciso es adecuadamente, funcione FM la radio que Para inalámbrico. dispositivo del La radio FM depende de una antena de además antena la Visual Radio. admitan no área su en de radio y estaciones operadores los que posible Radio, es Visual al servicio acceso tiene Si no servicio de correcta ID la tener deberá estación Esta • Consulte "Estaciones guardadas", pág. 209. pág. guardadas", "Estaciones Consulte servicio y el Radio Visual altavoz, ya que el volumen puede resultar muy alto. el utilizando si está oído del cerca dispositivo el puede perjudicar su facultad auditiva. No sostenga exposiciónLa continua a un nivel de volumen alto Advertencia: Escuche música a un nivel moderado. Visual Radio activado. ctar un auricular o accesorio itivo. El cable del auricular del auricular cable El itivo. 207 Personal 208 Personal Opciones . seleccione manualmente, frecuencia la cambiar Para o estación. una se encuentra cuando se detiene La búsqueda Para a comenzar estación, buscar una seleccione y seleccione colgar. Pulse que déjelo an la como funciona auricular del El cable al dispositivo. compatible auricular un Conecte área. su en de radio de la estación de de la cobertura La radio depende calidad de la transmisión Escuchar la radio . pulse pantalla de la tapa. Para es la cerrada. La información de estación puede aparecer en dispositivo la tapa del con Visual Radio escuchar Puede la red. de recibida de país la información en usada basado frecuencia de banda la radio selecciona La a encender. se vuelve radio la llamada, la termina Cuando desactiva. se la radio de volumen elactiva llamada hay una Cuando radio. la escucha mientras llamadas y recibir realizar Puede pulse la tecla numérica correspondiente. numérica la tecla pulse estación, la de memoria de ubicación la seleccionar Para o seleccione de radio, estaciones guardado Si ya ha para ir a la estación guardada siguiente o anterior. o siguiente guardada a la estación para ir > Ajuste manual Ajuste . cuchar o silenciar la radio, la radio, o silenciar cuchar tena de la radio, de modo de modo la radio, tena de Personal > Radio . al servicio, comuníquese con su proveedor de servicios. de proveedor su con comuníquese al servicio, suscribirse y para costos y disponibilidad la verificar Para contenido visual Ver Opciones seleccione área, su según disponibles estaciones las ver Para escuchar . Para altavoz Activar seleccione el altavoz, usando radio o la pulse volumen, el ajustar Para seleccione seleccione su lista de estaciones, en actualmente sintonizada Para guardar la estación Opciones guardadas, seleccione la lista de estaciones abrir estación Guardar Reproducir en 2° plano 2° en Reproducir seleccione plano, segundo en funcionando y dejarstandby la radio FM regresar al modo Para 209. guardadas", pág. "Estaciones Consulte > > Opciones Directorio estaciones Directorio Estaciones . . Para > . ople . pulse o (servicio de de red). (servicio Opciones Opciones > > Opciones seleccione la estación, de detalles los cambiar Para visual servicio Iniciar pantalla seleccione visual, contenido de vista la para pantalla de configuraciones las ajustar Para contenido. de proveedor el el conten muestra pantalla la sido establecida, ha visual al servicio la conexión Cuando red). de (servicio estaciones estación con el servicio Visual Radio, seleccione seleccione Radio, Visual con el servicio estación Seleccione Seleccione Configuraciones Estación guardada, estación seleccione escuchar una Para seleccione estaciones, de lista su abrir Para Radio. Visual en estaciones veinte hasta guardar Puede Estaciones guardadas estaciones, de vista la en o seleccione seleccione sintonizada, estación una para disponible visual contenido el ver Para o seleccione o seleccione ingréselo la estación, para guardado ha sido no visual ID de al abrir la aplicación. la abrir al inicio de Tono opciones: siguientes > > > Opciones Opciones Escuchar Luz Estación Recuperar : para seleccionar si un tono se emite emite se tono si un seleccionar para : o Tiempo ahorro energía ahorro Tiempo . Para ver el contenido visual para una una para visual elver contenido Para . > . > > Iniciar servicio visual servicio Iniciar para buscarlo en el directorio de directorio el en buscarlo para Configuraciones Editar ido visual actual diseñado por por diseñado actual visual ido . Opciones Opciones y alguna de las y alguna . > Config. de de Config. . Si el servicio . Si el servicio > Opciones Opciones Estaciones > > . 3GPP y, por lo tanto, no es admitido por este dispositivo. dispositivo. este por admitido es no lo tanto, por y, 3GPP estándares con los compatible no contenido incluir pueden pe .mp4, archivos todos abrir ejemplo, Por de archivo. formatos de variaciones las o todas archivo de formatos los todos admite embargo Sin o .rm. .mp4 RealPlayer insertada). una hay (si compatible tarjeta memoria de una o en dispositivo del memoria cuando explora páginas streaming Web o guardarlo en la directo porcontenido el activar aire. Puede un deenlace de multimedia archivos o videoclips reproducir puede Pulse Pulse y seleccione acceso para usar la aplicación como FM tradicional. radio como la usar aplicación para acceso de un punto necesita No datos. de la conexión para usado Punto de acceso seleccione visual, servicio ofrece que guardada comience automáticamente al seleccionar una estación Servicio de inicio auto. rhvsmliei" á.222. pág. multimedia", archivos través de LAN inalámbrica. Consulte "Ver a UPnP compatibles, como un televisoruna o PC, dispositivos otros con su dispositivo en streaming de Sugerencia: admite los archivos con extensiones como .3gp, .3gp, como extensiones con archivos los admite RealPlayer : para seleccionar el punto de acceso acceso de el punto seleccionar para : También puede vervideoclips o enlaces Personal : para que el servicio Visual Radio Visual el servicio para que : RealPlayer ro ciertos archivos .mp4 .mp4 archivos ro ciertos > RealPlayer no necesariamente no necesariamente RealPlayer . Con RealPlayer trata de Sí . , 209 Personal 210 Personal 1 videoclips Reproducir aaslnire oio atnaplaa hasta Para silenciar el sonido,mantenga pulsada • mantenga multimedia, archivo el Para rebobinar . • Para avanzarrápidamente, mantenga pulsada • siguen: como son reproducción la durante directos Los accesos 2 compatible (si hay una insertada), seleccione seleccione insertada), una hay (si compatible memoria de tarjeta una o en dispositivo del memoria la en guardado multimedia archivo un Para reproducir usd at u prza . hasta que aparezca mantenga sonido, activar el . Para pulsada aparezca que pulsada . archivo. para reproducir el y pulse archivo a un Desplácese 158. pág. "Galería", Consulte en guardado Clip en reproducidos archivos seis recientes más Clips Abrir Galería regresar al modo de pantalla normal. de regresar al modo para vez otra Pulse . pulse completa, pantalla Sugerencia: y alguna de las siguientes opciones: siguientes las de alguna y : para un archivo reproducir guardado Para ver un videoclip en el modo de de modo el en videoclip un ver Para : para escuchar uno de los últimos últimos los de uno escuchar para : RealPlayer Opciones > contenido. El contenido no se guarda en su dispositivo. su en guarda se no contenido El contenido. el a cargar y empieza sitio al conecta se dispositivo su directo, contenido de la reproducción iniciar de Antes o multimedia. texto de mensaje un en o recibido Web página información, comuníquese con su proveedor de servicios. de proveedor su con comuníquese información, más obtener Para 179. pág. configuraciones", y "Datos Consulte de servicios. proveedor del especial texto de configuraciones recibir Puede RealPlayer de configuraciones Recibir en guardado streaming de enlace un sobre seleccione aire, el directo contenido reproducir Para archivo .ram. embargo Sin En información. más obtener para servicios de proveedor su con Comuníquese vez. primera por dispositivo su al encender configurados ser pueden de acceso puntos Los de servicios le permitenWAP. de acceso punto un usar de punto acceso predeterminado. su para Otros proveedores IAP un use que requieren servicios de proveedores Varios Contenido directo sobre el aire (streaming) RealPlayer RealPlayer , sólo puede abrir una dirección URL dirección una abrir puede , sólo aceptará un vínculo http a un RealPlayer Galería enmensaje un , en una , en una

rtsp://. rtsp://. Seleccione Seleccione RealPlayer de las configuraciones Cambiar Video opciones: siguientes u ee srpr oetreaItre us . deseausarpara conectarse a Internetpulse y que Punto acceso predet. Red proxy. servidor proxy puerto Número Dirección de proxy proxy Usar proxy Config. correctas. configuraciones las obtener para servicios de proveedor su con Comuníquese al conectarse. usado puerto de rango el configurar y predeterminado acceso de Conexión de alreproducirlos. terminar videoclips los : : para que que : para clips de sonido o videoclips. o videoclips. sonido clips de contienen que explorador de a las páginas acceso acelerar el adicional o seguridad usan para proveer los servicios de proveedores Ciertos usuarios. sus y multimedia los servidores entre intermediarios Glosario : para usar un servidor proxy, cambiar el punto punto el cambiar proxy, servidor un para usar : Opciones : para usar un servidor proxy, seleccione seleccione proxy, servidor un usar para : : : son servidores Los servidores proxy RealPlayer : ingrese la dirección IP del servidor proxy. servidor del IP la dirección ingrese : > : al de punto acceso desplácese : ingrese el número de puerto del del puerto de número el : ingrese Configuraciones repita automáticamente automáticamente repita y alguna de las y alguna Sí . Organizar . seleccione carpeta, otra en flash archivo un copiar Para y pulse archivo al desplácese compatible, dispositivo un a flash archivo un enviar Para . y pulse archivo al desplácese flash, archivo un reproducir o carpeta una abrir Para seleccione y Pulse archivos flash Organizar los móviles. dispositivos para flash archivos con interactuar e reproducir ver, puede Flash Reproductor Con Seleccione Seleccione 65535. es valor máximo El servidor. del puerto de rango mayor UDP Puerto 1024. es valor mínimo El servidor. del puerto de rango menor UDP Puerto y seleccione tiempo el red. Seleccione de enlace un de a través reproducido multimedia clip un en RealPlayer conexiónTiempo de valores de ancho de banda para diferentes redes. para diferentes banda de ancho de valores Reproductor Flash Reproductor > se desconecte de la red cuando haga una pausa una haga cuando red la de desconecte se Opciones Copiar a carpeta Copiar Definido usuario : ingrese el número mayor de puerto del del puerto de mayor el número ingrese : :ingrese el número menorpuerto de del : configure el tiempo para que para que tiempo el : configure > Aceptar Personal Config. avanzadas Config. . . > Rep Flash Rep y pulse . Ingrese . Ingrese y pulse para editar los editar para . 211 Personal 212 Personal • • • naciofahyple . Seleccione pulse y flash archivo un a • Pulse y seleccione y seleccione Pulse flash archivos Reproducir seleccione flash, archivos sus para organizar carpeta una crear Para Organizar seleccione carpeta,otra a flash archivo un mover Para • us . pulse y archivo al desplácese flash, archivo un borrar Para variar. pueden disponibles Las opciones debajo de la pantalla. de debajo tecla cualquier pulsa cuando disponibles estar pueden teclas las de funciones las completa, pantalla la en seleccione normal, pantalla la a regresar Para pantalla. la Pantalla completa configuración la y cambie lenta, es irregular Si la reproducción Calidad derecha. o izquierda a la desplácese volumen de nivel el o disminuir aumentar Para Volumen Detener Pausa : pausa una lahacer en reproducción. > Organizar : seleccionar : seleccionar la calidad de la reproducción. Opciones : detener la reproducción. detener : : ajustar el volumen de reproducción. reproducción. de volumen el : ajustar Mover a carpeta Mover Pantalla normal Calidad y alguna de las siguientes opciones: siguientes las de y alguna > : reproducir el archivo usando toda usando archivo el : reproducir Personal Nueva carpeta a Normal . Aunque no están visibles visibles no están . Aunque > Rep Flash o Baja . . . Desplácese . Desplácese Las opciones disponibles pueden variar. pueden Las opciones disponibles • • música y texto que se usanel en muvee. gráficos, visuales, efectos transiciones, las determina y texto. El estilo música imágenes, video, contener pueden que editados videoclips son muvees Los la galería. desde 1 muvees Crear Pulse y seleccione 3 2 con la tecla de desplazamiento cuando ha hecho zoom. ha hecho cuando desplazamiento de la tecla con panorám. modo Activar zoom. con acercar de después original pantalla a Ajustar carpeta carpeta muvee y seleccione un crear desea cuales los con imágenes e videoclips los En vista principal la de un muvee y seleccione videoclipse imágenes los condesea cuales usarpara crear Seleccione Seleccione seleccionado. estilo películas Direc. estilos. de lista la de muvee el para estilo un Seleccione Director de películas Imágenes/video Crear muvee Crear usa la música y texto asociados al : reproducir el archivo en su tamaño tamaño su el en archivo reproducir : Personal Opciones Opciones Direc. películas Direc. en en . : desplácese :por desplácese la pantalla > Galería Direc. pel. > > Editar Crear muvee . Seleccione los los . Seleccione , seleccione seleccione , > o inícielo inícielo o Crear muvee o abra la . imágenes, música y texto. y música imágenes, alpersonalizado un muvee crear cual puede agregar Personalizar un estilo diferente para su muvee. También puede seleccionar 1 Crear un personalizado muvee multimedia y crear un muvee nuevo o Galería, la en muvee el de seEl muvee reproduce automáticamente aparece y la vista 2 Previsualizar y seleccione y seleccione videoclips e imágenes los con cuales crear un muvee desea de vista principal la En y seleccione y seleccione videoclips e imágenes los con cuales crear un muvee desea carpeta • opciones: siguientes imág. e Videos de alguna opciones: las siguientes seleccione de estilos, vista la En de estilos. lista de la muvee para el un estilo Seleccione imágenes nuevos. imágenes e videoclips capturar para cámara de la aplicación la o imágenes Agregar/Eliminar Imágenes/video para cambiar las configuraciones de muvee y de muvee las configuraciones cambiar para Opciones . Puede seleccionar seleccionar . Puede Opciones Agregar/Eliminar : seleccione alguna de las de alguna seleccione : Recrear : agregar o eliminar videoclips e videoclips o eliminar agregar : > > Direc. películas Direc. en Crear muvee Editar para mezclar los archivos archivos los mezclar para Galería Opciones > > Guardar Atrás Crear muvee Crear Capturar . Seleccione los Seleccione . o seleccione la la seleccione o para seleccionar seleccionar para > , seleccione los los seleccione , para guardar Personalizar para abrir abrir para . y 3 • • opciones: estas de una Seleccione muvees. de la producción para Configuraciones de cierreMensaje Mensaje Música • • • • Seleccione Seleccione multimedia Resolución muvees. sus Memoria en uso muvee. del duración la música, se repite la música hasta obtener la misma la música.Sila duración muvee deles más largaque se repite elmuvee hasta obtener lamisma duración de música, la que corta más es muvee del la duración Si seleccione Duración del muvee. o excluir a va incluir que video de contenidos Seleccionar personalizado. el muvee en imágenes e Mover predeterminado para los muvees. para predeterminado Nombre muvee predet. : para seleccionar el clip de música de la lista. la de música de clip el seleccionar : para : para editar el el editar : para : volver a organizar la posición de los videoclips videoclips los de posición la organizar a volver : Crear muvee : para definir la duración del muvee, muvee, del la duración definir para : Definida por usuario : seleccione la resolución de sus muvees. de sus resolución la seleccione : , Igual que música : para cambiar las configuraciones las configuraciones : cambiar para . : seleccione el lugar para guardar para lugar el seleccione : Mensaje de apertura Mensaje . : configure un nombre nombre un : configure : seleccionar los los segmentos seleccionar : o . Seleccione Seleccionar auto. Seleccionar Mensaje y

213 Personal 214 Personal configuraciones de muvee. de configuraciones crear un muvee nuevo o nuevo muvee un crear galería, seleccionar Puede El muvee se crea automáticamente y Recrear para mezclar los archivos multimedia y y multimedia archivos los mezclar para Guardar Personalizar para guardar el muvee en la la en muvee el para guardar Previsualizar paralas regresar a aparece. Opciones seleccione juegos, los usar cómo sobre instrucciones Pulse y Juegos seleccione > Ayuda . Personal y un juego. Para obtener obtener Para juego. un y usuario para Nokia PC Suite. PC para Nokia usuario del la guía en detallada más información encontrar Puede Bluetooth. inalámbrica o tecnología infrarrojo serie, o de compatible USB cable un usando PC compatible y una dispositivo su conectar Puede conectarse para módem un como dispositivo su Usar • PC Nokia aplicaciones entre información Transferir • siguiente: lo realizar para Es necesario conectar su dispositivo con una PC compatible PC Conexiones con servicios de red como Internet. de red como con servicios citas de agenda o imágenes. transferir sincronizar para ejemplo, Por dispositivo. y su Suite disponible PC Nokia disponible en Suite. y use Connected PC Suite, usar Nokia el asistente Get vez, para conectar su dispositivo a una PC compatible Sugerencia: Conectividad Cuando use Nokia PC Suite porprimera imágenes con imágenes imprimir para compatible impresora a una o conectarse para archivos) transferir (por ejemplo, puede conectarse inalámbricamente a su PC compatible y notas, sonido y música de clips videoclips, imágenes, auto. lapara usar para enviarPuede conectividad Bluetooth equipos y auriculares como accesorios y computadoras Los dispositivos compatibles pueden incluir teléfonos móviles, Bluetooth. inalámbrica la tecnología usando compatibles dispositivos a otros inalámbricamente conectar puede Se y seleccione Pulse Preguntar al conectarse al Preguntar seleccione el cable, cada vez que conecta la conexión imágenes player , Conectividad Bluetooth Conectividad PC Suite . Consulte "Imprimir imágenes", pág. 171. pág. imágenes", "Imprimir Consulte . . Para que el dispositivo pregunte el propósito de el propósito pregunte el dispositivo que Para . Cable de datos , Transferencia de datos de Transferencia Conect. . > Cable dat. Cable o Impresión de > Media Media Impr. Impr. 215 Conectividad 216 Conectividad compatibilidad de otros dispositivos con este dispositivo. este con dispositivos otros de compatibilidad la fabricantes los con Verifique modelo. este para Nokia por aprobados accesorios sólo utilice Bluetooth, tecnología la admiten que dispositivos otros con compatibilidad la garantizar Para dispositivo. de humano interfaz de perfil y SIM acceso de perfil básica, imagen de perfil archivo, de transferencia de perfil push, objeto de perfil genérico, objeto de intercambio de perfil libres, manos perfil perfil de conexión a red por marcación, perfil auricular, serial, de puerto perfil genérico, de perfil acceso impresión, de básico Perfil perfiles: los siguientes con compatible y es 2.0 Bluetooth Especificación la con cumple dispositivo Este electrónicos. dispositivos otros u paredes como obstrucciones, u interferencias a sujeta estar puede conexión pies), la pero (33 metros 10 de máxima distancia una de dentro estar necesitan solo dispositivos Los dos directa. línea en visualmente estar necesitan no dispositivo otro el y dispositivo su radio, de ondas usando comunican se Debido a con la los tecnología Bluetooth que dispositivos admitir los mismos perfiles. los mismos admitir deben compatibles, sean los dispositivos que Para y libres el teléfono. manos el dispositivo entre usa se Libres Manos Perfil el Por ejemplo, dispositivos. diferentes los conectan se cómo define y función Glosario: Un perfil corresponde a un servicio o una o una servicio a un corresponde perfil Un Bluetooth y cambiar la conectividad activar de Después dispositivo. su para y seleccione aplicación por primera vez, se le pide que defina un nombre Pulse Configuraciones dispositivo. del el bloqueo sobre información más obtener para 243 pág. "Seguridad", Consulte Bluetooth. conectividad la usar puede no se bloqueado, está el dispositivo Cuando la batería. de la vida útil reducen batería y de la de alimentación demanda la aumentan funciones, otras utilizan se plano mientras segundo en activación su permiten la que utilizan tecnología Bluetooth o que Las funciones servicios. de proveedor al o locales autoridades las en Bluetooth algunas localidades. a tecnología Consulte alla utilizar restricciones ciertas que existan Puede Bluetooth opciones: las siguientes de alguna Seleccione Bluetooth. la tecnología usan que usuarios otros por vistos ser pueden nombre este y dispositivo su configure primero la conectividad Bluetooth en en Bluetooth conectividad la primero configure compatible, dispositivo a otro inalámbricamente conectarse dispositivos, seleccione seleccione dispositivos, seleccione seleccione Bluetooth, la tecnología usan que dispositivos otros Visibilidad mi tel. la conexión. establezca luego y : seleccione : seleccione Mostrado a todos Mostrado : para que su dispositivo sea visto por por visto sea dispositivo su que : para Visibilidadtel. mi Conect. Activado Oculto . Para ocultarlo de otros otros de Para ocultarlo . > . o Bluetooth Desactivado a Mostrado a todos . Cuando abre la abre . Cuando . Para . Para Activado ,

permanece activa durante el modo remoto de SIM. remoto modo el durante activa permanece inalámbrica LAN de conexión una embargo, Sin la red. de servicios tarjeta de SIM funciones o que requieren la cobertura área señal,del y no indicadorpodrá en el usar de la los intensidad de la a la red inalámbrica se desactiva, como lo indica Nokia, aparece Nokia, dispositivo su en activado está SIM de remoto modo el Cuando el desde otro dispositivo. pág. dispositivos", el218. modo remoto de SIM Active "Vincular autorizado. Consulte como dispositivo otro el dígitos un código de y configure Al use vincular, dieciséis dispositivo. otro el desde iniciar deberá se y la vinculación vinculados estar modo, deberán activar los dos dispositivos el poder de Antes dispositivo. su en SIM de remoto modo y active auto, Bluetooth elhabilite uso del la conectividad para el accesorio con un SIM de modo remoto el usar Para Modo remoto de SIM seleccione red, a la conectarse para dispositivo el para un para accesorio auto, lausar tarjeta en su SIM Modo remoto de SIM nombre teléfonoMi SIM remota SIM : edite el nombre de su dispositivo. su de nombre el : edite : para habilitar otro dispositivo, como como dispositivo, otro habilitar para : e lmd tnb.L conexión en el modo standby. La Activado . Para salir del modo remoto de SIM, pulse y seleccione seleccione y Salir modo rem. SIM pulse SIM, de remoto del modo salir Para lmismo tiempo. al compatible dispositivo otro a archivos transferir puede también auricular, un a conectado está si ejemplo, Por vez. a la activas Bluetooth conexiones varias tener Puede Enviar datos perjudicial. contra contenido su dispositivo mejor proteger puede manera, esta De desconocido. dispositivo de un de vinculación solicitud ninguna acepte haga No o Bluetooth. inalámbrica tecnología con dispositivo su con conexión una establecer y encontrar puede quién Oculto seleccione Bluetooth, conectividad la usando esté no Cuando Sugerencias de seguridad . De esta manera, puede tener un mejor control de de control mejor un tener puede manera, esta De . ingrese ingrese el código de bloqueo. bloqueado, sido ha dispositivo el Si SIM. de remoto modo del salir deberá primero llamadas, realizar Para red. de cobertura la requieran que funciones otras usar ni emergencia, de llamadas las excepto llama ni recibir realizar Advertencia: Bluetooth En el perfil remoto de SIM, no se pueden > . Desactivado das con su dispositivo, das con su dispositivo, o Visibilidad mi tel. > 217 Conectividad 218 Conectividad 5 4 3 2 aparece1 continuamente, se están Cuando está dispositivo su parpadeando, está • Cuando • la standby, en modo el en aparece Cuando • Bluetooth conectividad de Indicadores datos la conexión, establecido haya se Cuando 218. pág. dispositivos", "Vincular Consulte código. un ingrese que pedirá le y se tono un sonará datos, transmitir poder Si el la de requiere antes dispositivo vinculación otro conexión. la con el el cual dispositivo establecer Seleccione desea y el elemento Seleccione abra compatible, a dispositivo otro desea Por una imagen para enviar que ejemplo, enviar. elemento el guardado está donde la aplicación Abra Bluetooth. la usando datos conectividad transmitiendo dispositivo. otro con conectarse de tratando está activa. Bluetooth conectividad eéoo ipstv eadood ie seleccione la búsqueda, interrumpir Para dispositivo. y video o de audio de dispositivo otro computadora, teléfono, son: dispositivos de iconos Los pantalla. la dentro del áreaalcance de empiezan a apareceren Bluetooth aparecerá enpantalla. la . Los dispositivos con tecnología Bluetooth Bluetooth . con tecnología Los dispositivos Opciones Galería > Enviar Enviando Parar . > . Vía Vía Los dispositivos vinculados son indicados por en la en dispositivo. del búsqueda por indicados son vinculados dispositivos Los vinculados. dispositivos de la vista guardado en queda el dispositivo la vinculación, de Después otro el dispositivo. en código mismo el ingresar deberá se También código. el ingrese e dispositivo el Seleccione pantalla. la en aparecer a empiezan alcance de área del dentro Bluetooth inalámbrica disp. nuevo Vincular seleccione dispositivo, un con vincular Para sola vez. una usa se El código predeterminado. fábrica de código un tienen de usuario interfaz sin código. el para Los dispositivos mismo use que dispositivo otro del dueño el con de acuerdo y póngase dígitos) de propio código (devincular, cree a su uno Antes dieciséis ), aplicación la de principal vista la en ( vinculados dispositivos de vista laabrir Para dispositivosVincular La carpeta enviados usando la conectividad Bluetooth. conectividad la usando enviados ingrese el código el ingrese su dispositivo, de única la dirección encontrar Para dispositivos). de (direcciones únicas direcciones sólo las mostrar pueden dispositivos algunos Sugerencia: Enviados Durante la búsqueda de dispositivos, dispositivos, de la búsqueda Durante en Los dispositivos con tecnología tecnología con dispositivos Los Mensajes *#2820# no guarda los mensajes en el modo standby. modo el en Bluetooth Opciones us . , pulse > las vinculaciones, seleccione seleccione vinculaciones, las recibir mensajes", pág. mensajes", 178. de entrada: "Buzón Consulte . recibir por indicados son elemento Bluetooth el y la conectividad través de a pantalla recibidos la en mensajes aparece carpeta la en queda acepta, lo Si sonará un tono y se le pregunta si desea aceptar el mensaje. Bluetooth, la conectividad travésa de datos recibe Cuando Recibir datos seleccione y dispositivo al desplácese vinculación, una cancelar Para separado. vez por cada aceptadas ser deben dispositivo no autorizado Fijar dispositivos los indica vinculados. dispositivos de la vista en autorizados confianza. de persona otra a pertenecientes o dispositivos compatible o PC auricular su como dispositivos, propios sus para estado este Use separado. por o autorización aceptación necesita se No lo sepa. usted sin que realizar pueden se este dispositivo y autoriz. como Fijar opciones: las siguientes de alguna y seleccione dispositivo a un desplácese autorizado, no o autorizado como dispositivo un configurar Para la conexión se desactiva. se conexión la y inmediato de cancela se la vinculación dispositivo, ese con la vinculación y borra dispositivo un Sugerencia: Opciones : las conexiones entre su dispositivo dispositivo su entre las conexiones : : las solicitudes de conexión de este este de conexión de solicitudes las : Si está conectado actualmente con con actualmente conectado Si está Buzón entrada > Eliminar Opciones . Si desea cancelar todas cancelar Si desea . en > Mensajes Eliminar todos . Los . 2 1 Enviar recibir infrarrojos y datos usando 1. Clase láser producto un es dispositivo Este infrarrojos. rayos de dispositivos otros con interfieran que permita ni personas, las dirijaNo los rayos infrarrojos (IR) a directamente los ojos de compatible. dispositivo un a multimedia y de agenda archivos notas negocios, de como tarjetas datos transferir puede Con infrarrojos, Bluetooth seleccione Bluetooth, conectividad la desactivar Para Desactivar recibir datos por infrarrojos, pulse y seleccione y seleccione Conect. pulse infrarrojos, por datos recibir para dispositivo su en infrarrojo puerto el activar Para infrarrojo. puerto el activa receptor dispositivo del usuario El de hasta 1 metro (3 pies). es dos dispositivos los entre recomendada distancia La dispositivos. los entre haya obstrucciones no que de y alineados están dispositivos de los recepción y envío de infrarrojos puertos los que de Asegúrese Conexión de infrarrojos de Conexión > > Desactivado Infrarroj. . 219 Conectividad 220 Conectividad un compatible. receptor multimedia de inalámbrico un sistema de sonido o televisor equipado o compatible, con o televisor de sonido sistema un compatible, impresora una Nokia, PC compatible, una a su dispositivo la red, como inalámbrica LAN que admiten compatibles dispositivos UPnP y conectar doméstica red una crear puede inalámbrica, enrutador LAN o un inalámbrica LAN acceso de de punto dispositivo un Usando UPnP. con compatible es dispositivo Su infrarrojo. infrarroja puerto su conexión usando datos la continuamente, aparece y recibir enviar para listo está dispositivo y su activa está Cuando su dispos destella, conexión. una ha perdido o se dispositivo a otro conectarse . Cuando por son indicados de nuevos infrarrojos en la carpeta guardados son infrarrojos por recibidos elementos los Todos cancela y iniciarla de nuevo. deberá se la conexión infrarrojos, del puerto tras la activación Si la transferencia de datos no se inicia dentro de un minuto 3 y seleccione de archivos, una aplicación o administrador en deseado el archivo localice por infrarrojos, datos Para enviar datos. infrarrojos deseada para iniciar la transferencia de El usuario del dispositivo envío de selecciona la función de Red doméstica Buzón entrada Opciones > Enviar en en itivo está tratando de tratando está itivo Mensajes > Vía infrarrojos Vía . Los mensajes mensajes . Los . Galería de compatibles multimedia archivos imprimir o copiar ver, reproducir, para doméstica la red usar puede También domést. para configuraciones las administrar Para doméstica. la red usando compatibles UPnP dispositivos otros con y estén UPnP admitan domésticos dispositivos otros los y que funcionando esté que inalámbrica LAN de de conexión configuración una requiere doméstica red una en N93 Nokia del inalámbrica LAN función de la uso El dispositivos en la dispositivos carpeta otro o busque Nokia dispositivo su en multimedia archivos copiar o imprimir reproducir, ver, para opción la seleccione o en de dispositivo otro de conexión solicitud una si acepta a la red sólo se doméstica conecta dispositivo Su en guardados multimedia archivos compartir Puede con punto de acceso inalámbrico LAN y encriptación activa. una red de infraestructura LAN inalámbricacon un dispositivo conexión LAN inalámbrica. Use la función de red doméstica en La red doméstica usa las configuraciones de seguridad de la lared doméstica. a misma osle"e rhvsmliei" á.222. pág. multimedia", archivos "Ver Consulte . accesos no autorizadosasus datos. de riesgo el reduce encriptación de métodos porEl uso LAN de móvil. conexión de seguridad su para de ladisponibles encriptación aumentar Importante: , pulse y seleccione y seleccione pulse , Siempre active uno de los métodos métodos los de uno active Siempre Red domést... Red Conect.

> Red domést... Red

conectados conectados Galería Galería Red Red ,

osle"ofgrcoe erddmsia,pg 221. pág. doméstica", red de "Configuraciones consulte las cambiar Para confidencial. multimedia archivo ningún o no comparta dispositivos otros con paraN93 compartir del laarchivos Nokia función apague Si usa LAN encriptación, inalámbrica red una no tiene en que desconocido. dispositivo un de conexión de solicitudes acepte No doméstica. a la red Su dispositivo le notifica si otro dispositivo trata de conectarse no autorizadas. personas de parte por ad hoc la red a de acceso riesgo el el de punto configure a acceso Internet. Este reduce paso métodos de encriptación en en encriptación de métodos de los uno active compatible, dispositivo un con doméstica red una para crear ad hoc operación de modo usa el Si 240. pág. acceso", de "Puntos en Nokia, de su dispositivo consulte LAN inalámbrica las configur ver o cambiar Para dispositivos. los de lejos y seguro secreto lugar un en contraseña cualquier Mantenga dispositivos. los de la documentación Consulte doméstica. red su a conectar piensa que dispositivos los otros en luego acceso, de punto de su dispositivo en primero de encriptación, el active método inalámbrica, LAN de doméstica red su configure Cuando seguridad importante de Información Modo segur. WLAN configuraciones de compartir, compartir, de configuraciones aciones del punto de acceso acceso de punto del aciones cuando cuando Las opciones relacionadas a relacionadas opciones Las Consulte "LANinalámbrica", pág. 145. configurar luego inalámbrica, LAN de su IAP doméstico y configurar debe crear inalámbrica, LAN una de a través compatibles UPnP dispositivos otros con en guardados multimedia archivos Para compartir doméstica red Configuraciones de en la vista principal doméstica,de red seleccione Para usar el asistente de configuración en otro momento, dispositivo. su para doméstica red de las configuraciones definir a le ayuda y se abre asistentede configuraciónvez, el primera por doméstica red de aplicación a la accede Cuando Asistente UPnP e domést. Red configurar Para Ajustar las configuraciones estén programadas. en siguientes opciones: opciones: siguientes proporcionado con su dispositivo. su con proporcionado instalar el software Home Media Server del DVD-ROM debe PC, la en doméstica, PC a la red una Para conectar Ejecutar asistente Galería antes de que las configuraciones para para configuraciones las que de antes > Configuraciones Red domést. Red y siga las instrucciones en la en la pantalla. y siga instrucciones las Red domést. Red , seleccione , seleccione y alguna de las las de alguna y Red domést. Red no están disponibles Conect. e domést. Red Opciones > Galería

>

221 Conectividad 222 Conectividad Punto de acceso local acceso de Punto usa usa doméstico a Internet que se usa automáticamente cuando Definido por usuario doméstica, red a la conecta se que cada vez doméstico acceso de punto el solicite dispositivo su que desea Seleccione Seleccione contenido y definir compartir de función la Activar doméstica. red la en compatibles dispositivos otros a los mostrarlo para dispositivo Nombre mi dispositivo pág. 240. acceso", de "Puntos en inalámbrica LAN Consulte inalámbrica. seguridad LAN activar la y primero del de punto cancelar la acceso, programación o momento otro en inalámbrica LAN seguridad la activar y continuar Puede seguridad. de advertencia una activadas, recibirá inalámbrica LAN seguridad de configuraciones las archivos multimedia con dispositivos compatibles. dispositivos con multimedia archivos Compartir contenido Red domést. Importante: Importante: Si activa demás configuraciones. las todas ajustar de antes compartir en las carpetas para ha seleccionado que archivos sus copiar UPnP compatibles en la red doméstica y ver pueden Conect. Compartir contenido o Ninguno > No programe para seleccionar su punto de acceso de acceso su punto para seleccionar : permita o rechace el compartir compartir el rechace o : permita Red domést. Red : seleccione seleccione : :ingrese un nombre parasu . Si su red doméstica no tiene tiene no doméstica red Si su . Imágenes y video Compartir contenido > Preguntar siempre , los otros dispositivos , los dispositivos otros Comp. contenido y Música si .

. 1 siguiente: lo haga compatible, televisor un como doméstica, de la red dispositivo otro en y mostrarlos dispositivo su en Para seleccionar imágenes, videos y clips de sonido guardados su dispositivo multimedia en guardados Archivos en para compartir seleccionado ha que multimedia archivos los y copiar ver pueden red doméstica su los otros dispositivos UPnP compatibles en Si la opción Nokia. dispositivo su con deberá doméstica, red la a suministrado DVD-ROM del asociado software el instalar compatible PC una conectar Para Ver archivos multimedia ipstv el e oétc ie todispositivo lo permite. dispositivo de la red doméstica si el otro otro en guardados multimedia archivos copiar y ver puede Comp. contenido 2 archivos, desactive sus a acceso tengan dispositivos otros los que desea no Si video o ver dispositivos el deestado compartir de Imágenes y video Imágenes carpetas las de multimedia archivos los seleccionar Para En Seleccione Seleccione clip de sonido. o Galería Música Comp. contenido , seleccione una imagen, un videoclip o un o un videoclip un imagen, una seleccione , Opciones , seleccione , seleccione está desactivada en su dispositivo, dispositivo, su en desactivada está y Comp. contenido Música > Mostrar vía red domést. red vía Mostrar Comp. contenido para con otros compartirlos estáactivada en su dispositivo, Comp. contenido ú cuando la opción . Aún Imágenes y . . 1 lo siguiente: haga compatible) televisor un (o en dispositivo su y mostrarlos la en en doméstica dispositivo red otro en guardados están que multimedia archivos seleccionar Para dispositivo otro en guardados multimedia Archivos 3 4 3 2 Opciones seleccione multimedia, el archivo compartir de dejar Para 5 En En sólo el reproducen otro en dispositivo. se sonido clips de y Los videoclips dispositivo. su y en doméstica la red en else encuentra en que dispositivos, ambos en aparecen imágenes Las multimedia. el archivo el cual compatible aparecerá en un dispositivo Seleccione ver y seleccione seleccione y ver desee que música de o clip videoclip imagen, la Seleccione dispositivo. otro del funciones de las dependen disponibles archivo detipos Los dispositivo. el tipo desea Seleccione que del de ver otro multimedia de dispositivo Seleccione un la lista. pantalla. la en aparecer a empiezan dispositivos de nombres Los compatibles. dispositivos otros buscar a comienza (imágenes y video) o y video) (imágenes Seleccione el dispositivo en el cual aparece el archivo. aparece el cual el en dispositivo el Seleccione Galería > Detener visualización Detener , seleccione , seleccione Opciones Repr. vía red doméstica Red domést. Red > Mostrar vía red domést. . Su dispositivo dispositivo Su (música).

que estar activado. estar que disponible). está compatible (el nombre de la tarjeta de memoria si una tarjeta de memoria Opciones y dispositivo otro el en archivo un seleccione dispositivo, Para ao transferircopiar del archivos dispositivo su otro doméstica Organizar UPnP, seleccione un archivo en en archivo un seleccione UPnP, a otro dispositivo compatible, como PC una compatible con Paracopiar o transferir archivos multimediadesu dispositivo multimediaCopiar archivos imágenes", pág. 171. Para buscar archivos con otro criterio, seleccione activado. en impresión de opción domést. Opciones Buscar Para imprimir imágenes guardadas en en guardadas imágenes imprimir Para . Para organizar los archivos encontrados, seleccione seleccione encontrados, archivos los organizar . Para con una impresora compatible UPnP, seleccione la la seleccione UPnP, compatible impresora una con > > . > Compartir contenido Copiar a mem. teléf. a mem. Copiar Ordenar por Copiar en red doméstica Compartir contenido Galería . Compartir contenido . Consulte "Imprimir Galería no tiene que estar que activado. no tiene o oiratarjeta mem. Copiar a Galería o y n tiene que estar no Mover a red Opciones a través de Opciones no tiene tiene no > Red >

223 Conectividad 224 Conectividad 1 de sincronización. de principal vista la En Sincronizar datos 179. pág. configuraciones", y "Datos Consulte especial. texto de mensaje un en de sincronización configuraciones recibir Puede su dispositivo. de datos los sincronizar desea cual la con aplicación la de proveedor el con comuníquese SyncML, de compatibilidad la sobre más información obtener Para la sincronización. para La de usa la aplicación SyncML tecnología sincronización sincronización. de configuraciones las editar o crear puede También o en Internet. compatible computadora en una varias aplicaciones de agenda y aplicaciones de contactos seleccione y con o e-mail contactos agenda, sus notas, sincronizar Pulse Seleccione un perfil de sincronización y de sincronización perfil un Seleccione seleccione seleccione finalice, que antes de la sincronización Para cancelar pantalla. la Sincronizar Sincronización Cancelar . El estado de la sincronización aparece en en aparece la sincronización de El estado . Conect. Sinc. . , puede ver diferentes perfiles perfiles diferentes ver , puede > Sinc.

Sinc. Opciones le permite le permite > Opciones Desconectar Para finalizar la seleccione conexión, ). ( inalámbrica de ) LAN y conexiones o de paquete ), conexiones datos ( de ( datos de llamadas abiertas: datos la vista deEn conexiones activas, puede ver las conexiones de Conexiones de datos del área dentro de seleccione alcance, activas Conex. seleccione inalámbrica, y LAN y UMTS GSM redes las en conexiones las o finalizar datos de conexiones las de estado Pulse y seleccione 2 (no sincronizados) en su dispositivo o en el servidor. elen o dispositivo su en (no sincronizados) descartados o borrados actualizados, agregados, sido han ingresos y cuántos la sincronización de estado el Seleccione Seleccione la sincronización. termine cuando Se le avisará Administrador de conexiones Administrador de la facturación, los impuestos, etc. los impuestos, facturación, la de redondeo el red, de servicios los según variar puede servicios y llamadas las para servicios de Nota: > Desconectar todas Desconectar . . Para cerrar todas las seleccione conexiones, Sí El tiempo real facturado por su proveedor su por facturado real tiempo El . Para buscar LAN inalámbricas disponibles disponibles inalámbricas LAN buscar Para . para ver el archivo de registro que muestra muestra que registro de archivo el ver para Conect. > . Adm. con. Adm. Opciones WLAN dispon. WLAN Paraver el > Opciones seleccione red, una de los detalles ver Para una tiene dispositivo su si en la red. activa conexión y encriptación con aparece para las redes de la señal. intensidad e de indicador 1 Crear un punto de acceso internet de alcance, el modo de su de el ( su alcance, red modo de del área dentro inalámbricas de LAN lista una muestra disponibles inalámbrica LAN de conexiones de La vista LAN inalámbrica seleccione conexión, de los detalles una ver Para 2 conexión. de Detalles 3 Pulse Pulse y seleccione Definir pto. acceso pto. Definir seleccione y Internet de acceso punto un crear desea cual la en red la a Desplácese alcance. El dentro LANs busca de dispositivo su inalámbricas dispon WLAN pág. 240. pág. estas configuraciones, consulte "Puntos de acceso", o cambiar ver Para predeterminadas. configuraciones con Internet acceso de punto un crea dispositivo El . Los detalles que aparecen dependen del tipo tipo del dependen aparecen que Los detalles . > Detalles . . . Conect. Infraestructura > Adm. con. Opciones Opciones o > Ad-hoc > > ) identificar su dispositivo ante ante su dispositivo el identificar servidor. Contraseña servidor configuración. de servidor servidor de ID configuración. de de servidor Nombre correctas. configuraciones las obtener para servicios de proveedor su con Comuníquese Configuraciones del perfil de servidor Opciones seleccione de servicios, proveedor su de sincronización de de ajustes la recepción o rechazar Para permitir Opciones seleccione y perfil a un desplácese dispositivo, su para Para conectarse a un servidor y recibir ajustes de configuración su dispositivo. en aplicaciones diferentes usadas por las y de configuraciones datos conexiones otras para acceso de punto de configuraciones incluir pueden ajustesinformación de configuración de la compañía. Estos de administración de o departamento servicios de proveedor de su configuración de ajustes y varios servidor de perfiles Pulse y seleccione Administrador de dispositivos Administrador > > Activar config. Activar config. Iniciar : ingrese la ID única para identificar el identificar para única la ID : ingrese : ingrese un nombre paraelservidor : ingrese una contraseña para para contraseña una ingrese : Conect. o Desactivar config. > Adm. disp. Adm. Puede recibir recibir Puede 225 Conectividad 226 Conectividad servidor, seleccione seleccione servidor, config. Permitir contraseña. y usuario de Nombre de usuario Puerto Direcciónservidor de servidor. al se conecte cuando acceso de Punto servidor. al se conecte cuando Modo de sesión : ingrese el número de puerto del servidor. puerto de número el ingrese : : seleccione el tipo de conexión para el: de tipo conexión seleccione usar : para recibir ajustes de configuración del : de para configuración ajustes recibir : seleccione un punto de usar para de punto acceso un : seleccione y Sí : ingrese la dirección URL del servidor. . Contraseña : ingrese su nombre nombre su ingrese : autenticación de red. Contraseña servidor seleccione servidor, una confirmación antesaceptar de una configuración del solicit. auto. Aceptar eifarjs,pg 219. pág. infrarrojos", de "Conexión consulte dispositivos, los conectar cómo sobre . Para obtenerinformación usarlo comoun módem, pulse y seleccione para infrarrojos, mediante compatible PC una a dispositivo Pulse Módem No : seleccione si desea que se use la use se que desea si seleccione : Conect. : si desea que el dispositivo solicite solicite dispositivo el que desea si : . > Módem . Para conectar su conectar . Para 1 de errores de cifras. redondeo Convertid. seleccione y a de Para unidad una medidas otra, pulse convertir la grabación. durante segundos cada cinco tono un escuchan personas Ambas abra telefónica, Trabajo seleccione y pulse voz, de recordatorios Para grabar 3 2 En el campo automáticamente para mostrar el valor convertido. el valor mostrar para automáticamente campo otro El cambiar. desea En el primer campo campo primer En el conversión. la Unidad campo próximo En el la conversión. hacer cual desea la En el campo primer Grabadora > Trabajo Grabadora tiene precisión limitada y se pueden producir producir y se pueden limitada precisión tiene , seleccione la unidad a la cual desea hacer hacer desea cual la a unidad la seleccione , Trabajo Convertidor Tipo Grabadora > , seleccione la medida que desea desea la que usar. medida , seleccione . Para grabar una conversación conversación una Para grabar . Convertid. Unidad Cantidad durante una llamada de voz. voz. llamada de una durante , seleccione la unidad desde desde unidad la seleccione , , ingrese el valor que el valor que , ingrese Cantidad cambia cambia archivos de texto sencillo (formato .txt) que recibe en que recibe .txt) (formato sencillo de texto archivos y compatibles a dispositivos enviar otros guardar notas Puede y seleccione pulse notas, escribir Para y seleccione Trabajo pulse porcentajes, y cuadrada raíz la dividir y calcular multiplicar, restar, Para sumar, Seleccione cambio Moneda base y tasas de cambio de la moneda base siempre es 1. es siempre base moneda la de cambio y agregar las base una moneda seleccionar deberá divisas, de conversión hacer poder de Antes Calculadora está diseñada para cálculos sencillos. cálculos para diseñada está Nota: programados en cero. cero. en programados quedan anterioridad con ingresados cambio de los tipos todos que puesto tasas de cambio nuevas Nota: > Notas Tipo Calculad. Esta calculadora tiene precisión limitada y limitada precisión tiene calculadora Esta Al convertir la ingresar divisa las debe base, > Moneda > Opciones tasas de cambio. La tasa de > Cambios monedas Cambios Trabajo > Notas Notas . . . 227 Trabajo 228 Trabajo Para abrir el administrador zip, pulse y seleccione y seleccione Trabajo pulse zip, administrador el abrirPara e-mail. por enviar para convenientes más y son memoria menos utilizan comprimidos Los archivos Use la aplicación administrador zip para comprimir archivos. zip Administrador seleccione 8150), Photosmart 450 o HP móvil HP Deskjet (como impresora la Bluetooth conectividad con (BPP) impresión de básico perfil con equipada compatible impresora una en nota una Para imprimir de memoria compatible. de memoria tarjeta una en o dispositivo el en archivos guardar Puede Configuraciones de administrador zip: cambiar las • configurar, de o la Contraseña archivo: borrar cambiar • un de directorios o archivos eliminar archivos: Eliminar • un agregararchivo: Actualizar o archivos individuales • para archivo nuevo un crear archivo: Crear nuevo • zip: administrador el usando tareas siguientes las realizar Puede compresión) e siguientes configuraciones: de contraseña para archivo protegidos. archivos existente. archivo existente. archivo un a directorios o multicomprimidos en ZIP. formateados comprimidos archivos guardar > Zip . Include subfolders Opciones Compression level (Incluir subcarpetas). > Imprimir (Nivel de de (Nivel . para ir a la vista deseada. Para abrir Opciones enseleccione eltexto buscar documento, Para desplazamiento. de la tecla use documento, el desplazarse por Para Ver documentos Word También 230. consulte "Más información", pág. archivos mencionados. de formatos los de funciones ni variaciones las todas .doc en Microsoft Word 97 o más reciente. No se admiten Quickword subrayados. y caracteres cursiva negritas, su dispositivo. de la pantalla en Con Quickword seleccione los archivos, organizar . Para Opciones pulse correspondiente, aplicación su con archivo un abrir Para el en dispositivo. guardados y .txt .ppt .xls, .doc, archivos seleccione y Trabajo pulse Quickoffice, aplicaciones las usar Para Quickword > Quickword > > Quickoffice admite los documentos guardados en el formato formato el en guardados documentos los admite Quickoffice Buscar archivos Ordenar , puede ver documentos de Microsoft Word Word de Microsoft documentos ver , puede . , . Se abre una lista de los formatos de los de formatos lista de una . Se abre Quicksheet . Quickword o Quickpoint admite colores, colores, admite us , pulse pulse . pulse función, esta detener Para documento. el por automática Autodesplaz. Comenzar Zoom documento el en a Ir opciones: siguientes Opciones seleccione de cálculo, hoja la de vista la cambiar Para seleccione fórmula, o texto la hoja en Para buscar Worksheet Para alternarentre hojas, seleccione desplazamiento. de la tecla use de cálculo, por la hoja Para desplazarse Ver hojas de cálculo 230. pág. información", "Más consulte También mencionados. archivos de formatos los de funciones ni variaciones las todas No se admiten 97 o reciente. más Excel en Microsoft .xls Quicksheet dispositivo. su de pantalla la en Con Quicksheet seleccionar puede También : para ir al comienzo, final o lugar seleccionado seleccionado o lugar final comienzo, al ir para : Quicksheet : para: acercarsealejarse o y opciones: de las siguientes (Hoja de cálculo). (Hoja de admite los archivos guardados en el formato formato el en guardados archivos los admite , puede leer archivos de Microsoft Excel Excel Microsoft de archivos leer , puede Opciones : para desplazarse de manera manera de para desplazarse : Opciones de cálculo dentro de cálculo dentro de un valor > Buscar Opciones y de las las y de . > de bosquejo, seleccione seleccione bosquejo, de Para ampliar los elementosla en presentación en lavista columna o ambas paneles Inmovilizar Zoom seleccione seleccione . completa, pantalla la en presentación la ver Para o Para ir a o anterior, próxima pulse diapositiva la notas, de pulse vista y bosquejo la diapositiva, por Para desplazarse o . presentaciones Ver Con Quickpoint y bloque un seleccione filas, y columnas las ver Para pantalla. la en aparecen que y filas columnas contiene Un bloque viendo. está que cálculo de hoja la Panoramizar abé osle"á nomcó" á.230. pág. información", "Más consulte También mencionados. archivos de los formatos de funciones ni variaciones las todas admiten se No reciente. más o 97 PowerPoint Microsoft en .ppt Quickpoint dispositivo. su de la pantalla en PowerPoint filas o Redimensionar Quickpoint : para: acercarse o alejarse Opciones admite los archivos enguardados el formato : para navegar dentro de los bloques de de los bloques de dentro para navegar : : para ajustar el tamaño de las columnas columnas las de tamaño el ajustar para : , puede ver presentaciones de Microsoft , de Microsoft puede presentaciones ver

inrss epaaprla hoja de cálculo mientras se desplaza por : para mantener visible: para > Ajustar a pantalla Ajustar Opciones > Pantalla normal la fila resaltada, la . Aceptar . . 229 Trabajo 230 Trabajo Quickpoint Pulse • y documentos: y abrir acceder Para seleccione comparado con las deversiones PC. de funciones limitado y sólo un conjunto proporciona móviles dispositivos otros y teléfonos en PDF documentos de contenido el para optimizada fue aplicación Esta en la pantalla de su dispositivo. PDF formato en documentos leer puede Reader Con Adobe con problemas Si tiene Más información • Envíe un documento usando la conectividad Bluetooth Bluetooth la conectividad usando documento un Envíe • recibidos e-mail de mensajes de adjunto archivo un Abra • soporte al enviar e-mail a [email protected]. a e-mail enviar al soporte obtener puede También información. más obtener para Opciones en su de(servicio red). en una tarjeta de memoria compatible. documentos almacenados en la memoria del dispositivo y Buzón entrada , consulte , consulte Adobe reader Adobe > Buscar archivo Buscar www.quickoffice.com Quickword

Trabajo en Mensajes para explorar y abrir y para explorar > , Adobe PDF Quicksheet . (en inglés) . Seleccione o alguna de las siguientes opciones: siguientes las de alguna esté seleccione abierto, PDF archivo un Cuando archivos PDF Ver y seleccione explorarPara los y pulse PDF, archivos administrar Administrar archivos PDF •Use • Explore páginas Web. Asegúrese de configurar su de configurar Asegúrese Web. páginas Explore • de visualización predeterminados de los documentos PDF. los documentos de predeterminados visualización de Configuraciones compatible. memoria detarjeta una o en dispositivo del la memoria en PDF archivo Buscar opciones: siguientes documento, seleccionar puede También un . abrir Para archivo. vista ay éste pulse desplácese la en lista una en están usuario de su dispositivo. de su usuario del manual el consulte acceso, de puntos los sobre información más obtener Para exploración. la iniciar de antes Internet acceso de punto un con dispositivo de memoria. tarjeta la y en dispositivo del memoria la en almacenados Adm. arch. Adm. Trabajo : para explorar en búsqueda de archivos archivos de búsqueda explorar en : para : para modificar el nivel de zoom y el modo y el modo de zoom nivel : el para modificar > para explorar y abrir documentos documentos abrir y para explorar Adobe PDF Opciones . Sus archivos recientes recientes archivos Sus y alguna de las de y alguna Opciones

y Detalles predeterminados. visualización de Configuraciones o endispositivo tarjeta una de compatible. memoria Guardar o última. primera a Ir sentido. cualquier grados hacia a 90 PDF documento girar el puede También Vista support/forums/main.html consulte información, más obtener Para Más información Buscar pantalla. la en completa PDF el según de tamaño ancho la el cambiar puede También seleccionado. porcentaje Zoom Adobe Reader para Symbian OS en OS en Reader para Symbian Adobe de usuarios para el fórum visite aplicación, la de acerca e información sugerencias preguntas, compartir Para (en inglés). : para ir aanterior, siguiente, una seleccionada, página : para ver el documento en la pantalla completa. completa. pantalla la en documento el ver para : : para acercar, alejar o cambiar el tamaño a un un a tamaño el cambiar o alejar acercar, : para : para buscar un texto en el documento. el en texto un buscar para : : para mostrar las propiedades del documento PDF. documento del propiedades las : mostrar para : para guardar el archivo en la memoria del del la memoria en archivo elguardar : para : para modificar el nivel de zoom y modo y de zoom nivel el modificar : para . pantalla o laajustar página http://adobe.com/ www.adobe.com

Para escanear y descifrar los códigos de barra, pulse , , y seleccione Para escanear de y descifrar barra, los códigos pulse enlaces URL, direcciones de e-mail y números telefónicos. revistas). Los códigos pueden contener información como de códigos (por ejemplo, códigos de barras y códigos en las Use la aplicación por país, proveedor y/o proveedor de servicios. variar barras lector de puede código de de La disponibilidad se indican con los iconos en la en la iconos con los indican se e-mail, de y direcciones telefónicos números URL, enlaces enlaces, los diferentes descifrada, Al ver información . pulse en el sentido que aparecen en la información descifrada. información la en aparecen que sentido el en seleccione principal, la vista en guardó, que descifrada información Para ver Guardar Para seleccione los datos que guardar escaneó, pantalla. la en aparece descifrada barras Códig. El pantalla. en la rojas las líneas entre el código Configure seleccione código, un Para escanear . Los datos se guardan en el formato .bcr. formato el en guardan se datos Los . Lector de código de barras de Lector de código Trabajo escanea y descifra el código y la información y la información código el descifra y escanea Códig. barras > Datos guardad. Datos Códig. barras Códig. para descifrar diferentes tipos parte superior de la pantalla superior de parte . Para abrir código, un Escanear código Escanear Opciones . > 231 Trabajo 232 Trabajo Seleccione Seleccione a un número telefónico o una dirección de e-mail e-mail de dirección una o telefónico número un a mensaje Crear en favorito Agregar a favoritos Abrir enlace Escanear código nuevo opciones: siguientes Datos guardad. Web : para abrir un enlace URL un enlace abrir : para : para enviar un mensaje de texto o e-mail o e-mail de texto mensaje para enviar un : : para guardar un enlace URL en el : para escanear un nuevo código nuevo un para escanear : > Opciones de y alguna las saenooved aifraingadd,ple . o la guardada,viendo escaneando información pulse continuar Para minuto. un por teclas de pulsaciones si batería la activa El dispositivo el modo resaltado. enlace variar pueden del dependiendo Las opciones disponibles Llamar URL a dirección o de e-mail dirección a Contactos Agreg. : para llamar a un número telefónico. número un a llamar para : Códig. barras : para agregar un número telefónico, telefónico, número un agregar para : no se puede activar o si no hay activar no se puede standby para ahorrar carga de ahorrar carga para standby Contactos • Para cambiar la imagen imagen la cambiar Para • rápido acceso a standby para pantalla la Para utilizar • más información. obtener para servicios de proveedor su con Comuníquese cambiosennombres de menús,orden de menúsiconos. e incluir puede configuración Esta de servicios. proveedor su para configurado especialmente estar puede dispositivo Su dispositivo. de su menú el en no aparecerán así, éstas ser De dispositivo. su en activen se o no inhabiliten se opciones ciertas que pedido haber puede servicios de proveedor Su Personalizar su dispositivo á.235. pág. dispositivo", su de apariencia la "Cambiar de pantalla, consulte protector muestra en el se lo que o standby en el fondo modo de 235. activo", pág. "Modo standby consulte frecuencia, con más que usa sus aplicaciones • Para cambiar Para el reloj que aparece en el modo • , a asignados directos accesos los cambiar Para • "Perfiles: timbre, consulte de los tonos personalizar Para • • Para cambiar la nota de saludo inicial a una imagen imagen una a inicial saludo de nota la cambiar Para • • Para cambiar la vista del menú principal, en el menú menú el en principal, menú del vista la cambiar Para • • Para reorganizar Para el menú principal, en el menú principal, • standby, pulse , y seleccione y seleccione , pulse standby, 238. standby", "Modo standby, consulte modo el en pág. y pág. contactos", 200. para de timbre tonos y 234 "Agregar pág. tonos", configurar Configuraciones o animación, pulse y seleccione y seleccione Config. pulse animación, o o principal, seleccione seleccione principal, seleccione Cuadrícula o ao rcecaa eúprincipal. menú al frecuencia mayor con usa que aplicaciones las mover y carpetas a frecuencia carpeta Digital ud oe a piainsqeusa con menos . Puede lasmover aplicaciones que > . Teléfono Opciones o Lista > . Tipo de reloj de Tipo > > Opciones Mover General , Mover a carpeta > > Reloj Saludo inicial o logo inicial Saludo Cambiar vista > Herram. Analógico > Opciones > o

Nueva > > . 233 Personalizar su dispositivo 234 Personalizar su dispositivo ra nuevo Crear seleccione perfil, nuevo un crear Para Personalizar seleccione dispositivo, el suena cuando lo llama que persona de la el nombre escuchar Si desea tonos. para descargar página Web una a conexión la iniciar e favorito un seleccionar Puede favoritos. tono, un Al seleccionar seleccionar uno. Para detener el sonido, pulse cualquier tecla. . Puede desplazarse por la lista de tonos y escucharlos antes de tonos Los opciones. las abrir para almacenadoslatarjeta en de memoriason indicados con y pulse cambiar Personalizar Herram. y seleccione , pulse llamantes, de grupos o entornos eventos, diferentes para tonos y otros mensaje de de alerta tonos timbre, de tonos los personalizar y configurar Para de la persona deberá estar guardado en guardado estar deberá persona la de Modos y seleccione pulse un perfil, Para modificar seleccione standby. modo el en y activar desea que el perfil hasta Desplácese pulse perfil, el cambiar Para . Desplácese al perfil y seleccione y seleccione perfil al Desplácese . Perfiles: configurartonos > Aceptar Modos > . Desplácese hasta la configuración que desea desea que la configuración hasta Desplácese . . Decir nomb. llamante . . Descargas tonos Descargas > Opciones Contactos Activar Opciones abre una lista de Opciones . El nombre Herram. > . > > > nlmrc" á.145. pág. inalámbrica", usar una conexiónLAN de inalámbrica. Consulte "LAN y aplicable de al establecer seguridad requisito cualquier con cumplir Recuerde Internet. explorar o e-mail leer su para usarLAN la inalámbrica (sies Cuando tiene el perfil desconectado activado, todavía puede momento. otro en enviados ser para salida de buzón el en guardan se éstos mensajes, enviar de tratar Al dispositivo. el y desde hacia móvil teléfono de señales área que elen las todas restringen Se señal. la de intensidad la indica por indicado es como inalámbrica, a la red apaga la conexión se desconectado, perfil el activar Al inalámbrica. a la red conexión de necesidad usar sin elle El perfil permite dispositivo desconectado desconectado Perfil prohibido o causarpueda o interferencia peligro. esté móviles dispositivos de uso el donde dispositivo el encienda No desconectado. perfil el para usar Advertencia: ingrese elbloqueado, código de bloqueo. está dispositivo Si el teléfono. de función la activar para perfiles cambiar debe llamadas, realizar Para la cobertura que de requieran red. funciones otras ni usar de emergencia, números ciertos a llamadas excepto llamadas, recibir ni realizar Advertencia: En el perfil desconectado, no se pueden Su dispositivo deberá estar encendido tá disponible), por ejemplo, ejemplo, por disponible), tá antes deantes activarlo, seleccione Opciones y seleccione tema al desplácese tema, un activar Para . En activo por indicado es tema El temas, seleccione más y descargar explorador de conexión Para una abrir dispositivo. del memoria la en temas los primero guarde de memoria, la tarjeta sin de memoria la tarjeta en guardados temas los usar Si desea dispositivo. el en insertada memoria de tarjeta la en temas . Los está no detarjeta memoria si la disponibles están no por indicados son una tarjeta de memoria compatiblehay (si una insertada) Galería de imágenes o temas seleccionar de otros los elementos de fondo e iconos, pulse y seleccione y seleccione pulse iconos, fondo e de imagen la como dispositivo, de su la apariencia cambiar Para desconectado. 216. pág. "Configuraciones", Consulte salir del perfil vuelve activar automáticamente a tras se Bluetooth conexión será desactivada. Una conexión Bluetooth antes de acceder al esta perfil desconectado, suficiente de la señal). Si tiene activada una conexión las transmisiones inalámbricas (con quetal intensidad haya habilitar a vuelve El dispositivo perfil. otro y seleccione Apagar Encender/ la tecla pulse desconectado, perfil del Para salir para personalizar aún más los temas. Los temas en en Los temas los temas. más aún personalizar para > es dispositivo su de la apariencia Cambiar Aplicar Descargas temas Descargas . Para obtenervista una previa del tema Opciones . Temas > Herram. Vista previa puede agrupar > Temas . . Opciones seleccione y tema un a desplácese temas, editar Para para originales, seleccione seleccione originales, avalores sus seleccionado el tema restaurar Para Pulse , Pulse seleccione predeterminada. forma en activado está standby El modo uso frecuente. de pantallaUse standby su para acceso rápido a aplicaciones sus standby activo Modo Standby editar un tema. al nl parte inferior. la en listados reproductor y tarea de notas agenda, de eventos con y pantalla la de superior parte la en predeterminadas aplicaciones con activo aparece standby modo deLa pantalla activo. standby de modo el desactivar Imagen de fondo > > Standby activo Standby Editar para cambiar las configuraciones configuraciones las cambiar para Herram. Opciones y Ahorro de energía de Ahorro y pulse para activar o y pulse > Config. > Restaurar tem. orig. tem. Restaurar > Teléfono . >

235 Personalizar su dispositivo 236 Personalizar su dispositivo No se pueden usar los accesos directos estándar de la tecla tecla la de activo. está activo standby el modo estándar directos cuando standby modo el en disponibles de desplazamiento accesos los usar pueden se No . pulse y o evento aplicación una a Desplácese Teléfono , seleccione pulse aplicaciones, las dire los cambiar accesos Para Ciertos accesos directos son fijos y no los puede cambiar. los puede no y fijos son directos accesos Ciertos > Standby > Aplic. en standby act. standby en Aplic. ctos predeterminados para predeterminados ctos Herram. > yple . y pulse Config. > Ciertos accesos directos son fijos y no los puede cambiar. puede no los y fijos son directos accesos Ciertos cambiarlas. pueda no que posible es y servicios de proveedor su por preconfiguradas estar pueden configuraciones Algunas . desea que configuración una a Desplácese . pulse y cambiar pulse Para cambiar las configuraciones, pulse y seleccione y seleccione Herram. pulse configuraciones, las cambiar Para Arriba , seleccione pulsa cuando aparecen que aplicaciones las dire accesos los cambiar Para . pulse aplicación, una seleccionar sin lista la de salir Para desplazamiento. de aplicación la tecla la abrir . use Para deseada, pulse multimedia, aplicaciones . Para abrir una lista de las mantenga pulsada tecla propia, a la asignado directo acceso Para el abrir , Tecla propia Izquierda Configuraciones > Herramientas Config. , Centro Para abrir un grupo de configuraciones, configuraciones, de grupo un abrir Para y Derecha ts us . cambiar Para pulse ctos, y aplicación. la Cambiar las configuraciones para para configuraciones las Cambiar se reinicia. el dispositivo los textos en pantalla, de el idioma cambiar SIM. Tras en su tarjeta información cálculos. los en ejemplo, por separadores, los y hora y fechas para usado formato afecta el también dispositivo de su pantalla teléfono del Idioma General o Idioma de escritura de Idioma configuraciones. estas vez otra modifique que hasta activo permanece el cambio y dispositivo predictivo no está disponible para todos los idiomas. los todos para disponible está no predictivo texto de ingreso el para diccionario El dispositivo. el como predictivo Texto de predictivo. texto usa el texto ingreso se escribe y cuando cuando disponibles especiales y caracteres caracteres Idioma de escritura Activado Configuraciones de teléfono Automático o : configure el ingreso de texto predictivo predictivo texto de ingreso el configure : Desactivado : cambiar el idioma afecta los afecta idioma el cambiar : : cambiar el idioma de los textos en en textos los de idioma el : cambiar selecciona el idioma según la la según idioma el selecciona afecta cada aplicación en su aplicación cada afecta para todos los editores en en editores los todos para Idioma del teléfono del Idioma

237 Herramientas 238 Herramientas en activarse. Los documentos y archivos quedan intactos. quedan y archivos documentos Los activarse. en más poco un tardar puede dispositivo el configuraciones, las restaurar de Después 244. pág. SIM", y "Teléfono "Seguridad", Consulte bloqueo. de código el necesitará esto, hacer Para originales. valores sus a configuraciones Config. originales disponibles si el modo standby activo está activado. está activo standby modo si el disponibles están no central selección de la tecla de directos accesos Los central. selección de la tecla de pulsaciones diferentes para del teclado directos accesos asignar puede También activo si disponible está sólo configuración Esta activo. directos de que aplicación de standby. modo el en ) act. standby en Aplic. ( derecha de selección standby. modo el en ) Tecla selecc. derecha ( izquierda selección Tecla selecc. izq. 235. pág. en el "Modo standby modo standby. Consulte activo", activoStandby Modo standby de imagen para escribirun saludo inicial o Predeterminado Seleccione dispositivo. el enciende que vez cada brevemente Saludo inicial o logo está activado. Galería : uselos accesos: directos las para aplicaciones para usar para laimagen predeterminada, : asigne un acceso directo a la tecla de tecla la a directo acceso un asigne : . : puede reprogramar ciertas ciertas reprogramar : puede : el saludo inicial o logotipo aparece aparece logotipo o inicial saludo el : : asigne un acceso directo a la tecla a la tecla directo acceso un : asigne : para seleccionar los accesos los accesos seleccionar para : sea que aparezcan en standby Imagen para seleccionar una Standby Standby Texto

reproducirla cuando cierra la tapa.la cierra cuando reproducirla animación de Cierre imagen que desea que aparezca en la pantalla de la cubierta. de la área el y recortar girar la acercarse, y puede cubierta herramienta para recortar es del tamaño de la la pantalla de parte superior de la imagen que seleccionó. El marco de en la aparece recortar para herramienta la de marco el fondo, porDefinida el usuario laen pantalla de la cubierta en el modo standby. Si selecciona de fondo Imagen opciones: Seleccione Pantalla de la cubierta apaga. se la pantalla de fondo de la luz cual el Tiempo espera luz pantalla. de protector el activará cual se el tras Tiempo ahorro energía automáticamente. ajustará se pantalla de la el brillo de iluminación, extremas más clara hacerla Sin enu oscura. condiciones embargo, Brillo Pantalla Seleccione operador. del logotipo un y guardado ha recibido cuando operador del Logo : ajuste los niveles básicosde Desactivar Personalización : seleccione la imagen de que fondo aparece : seleccione un tiempo de espera tras tras de espera tiempo un : seleccione : esta configuración sólo aparece aparece sólo configuración esta : : seleccione una animación corta para para corta animación una seleccione : si no desea que aparezca logotipo. el aparezca que desea no si en las configuraciones de imagen de : seleccione el tiempo de espera espera de tiempo el seleccione : y alguna de las siguientes siguientes las de alguna y brillo de la pantalla para para pantalla de la brillo Rechaz. llam. c/ SMS lmd" á.193. llamada", pág. atender la llamada. Consulte "Contestar o rechazar una de texto por informándole a un llamante no pudo qué la función, seleccione seleccione función, la seleccione activa, está función la si verificar Para curso. en una tiene cuando entrante llamada una avisa de red), le la red de (servicio en espera Llamada red. de al servicio suscriba se cuando servicios de su proveedor por está llamando. De lo contrario, el valor puede programarse a quien persona la de u oculte muestre se teléfono su que Envío del nº propio Seleccione standby. modo el en está dispositivo y el la tapa abre cuando reproducirla tono de Apertura tapa. la cierra cuando reproducirla Cierre de tono cia altavoz Activar Si tapa cerrada abierta si tapa Contes. Fijado la por red Configuraciones de llamada Llamadas : seleccione una melodía corta para para corta melodía una seleccione : . : seleccione : seleccione Verificar estado : seleccione una melodía corta para para corta melodía una seleccione : : seleccione : seleccione : si activó la enfunción llamada espera y alguna de las siguientes opciones: siguientes las de y alguna : seleccione Activar Activar aparece en la pantalla. la en aparece : seleccione : seleccione Finalizar llamada Activado o Cancelar Sí . Para activar o desactivar desactivar o activar . Para para enviar un mensaje mensaje un enviar para No o o Desactivado . Sí . o para Marcación automática Marcación video. del lugar en aparezca que para fija imagen una Seleccione video. de llamada una recibe cuando video llam. en Imagen llamada. una rechace cuando de texto mensaje un en Texto de mensaje Cualq. tecla contesta tecla Cualq. 188. rápida", pág. "Marcación consulte También ) puedenmarcados seral mantener pulsada la tecla. - rápida ( marcación teclas de a las asignados rápidaMarcación llamada. última la de aproximada duración la brevemente muestre dispositivo el . tras llam. Resumen pulse automática, marcación función la detener Para éxito. sin llamada primera la hacer de después diez veces de máximo un tratará conectarse de Cuando selecciona la línea 2, aparece en aparece standby. en la modo 2, selecciona la línea Cuando llamadas. podrá hacer no red, de servicio a este suscribirse selecciona Si seleccionada. línea la importar . sin líneas ambas para las llamadas contestar Podrá texto. de mensajes enviar llamadas y para hacer usar desea que y telefónica línea la Seleccione telefónicas. dos líneas es decir, , suscriptor, de números admite dos SIM la tarjeta aparece si , Línea en uso de excepción la con teclado, el en tecla cualquier pulse brevemente entrante, llamada la : esta configuración (servicio de red) sólo sólo red) de (servicio configuración : esta : escriba un texto para que se envíe envíe se que para texto un escriba : : seleccione : seleccione : activeestaconfiguración si deseaque : seleccione : seleccione : puede rechazar el envío devideo : seleccione : seleccione Activar Activar Activar y los números números y los . Para contestar contestar . Para y su dispositivo dispositivo su y Línea 2 sin 239 Herramientas 240 Herramientas código PIN2. el necesitará configuración, esta cambiar Para opción. • IAP para enviar y recibir e-mail y conectarse a Internet y conectarse e-mail y recibir enviar para IAP • las ver para Web aplicación la para acceso de Punto • recibir y enviar para MMS acceso de Punto • sigue: como acceso, de puntos de tipos variosfijar Puede acceso. de punto de conexión se una Para datos, requiere establecer un conexión LAN inalámbrica puede estar activa a la vez. una Sólo 145. pág. "LAN inalámbrica", Consulte inalámbrica. LAN de datos de conexión una usar puede También compartir conexión de una datos. pueden acceso de puntos y los simultáneamente de datos activas podrá tener redes varias GSM y UMTS, conexiones las en su dispositivo la usa Cuando como GPRS en GSM. red de datos, de las conexiones paquete admite Su dispositivo Conexiones de datos y puntos de acceso de red), seleccione de red), seleccione Cambio de línea páginas WML páginas WML o XHTML multimedia mensajes mantenga pulsada la tecla en el modo standby. modo el en pulsada la tecla mantenga Sugerencia: Conexión : para evitar la selección de línea (servicio (servicio de línea selección la evitar : para Desactivar Para entre las Para alternar líneas telefónicas, si la tarjeta SIM admite esta admite SIM tarjeta si la

punto de acceso LAN inalámbrico. LAN acceso de punto un indica protegido. acceso de punto eliminarlos. ni editarlos crearlos, cambiarlos, y de servicios su proveedor es no pueda posible que por dispositivo su en preconfigurados estar pueden accesos de puntos o todos los Algunos 179. pág. configuraciones", "Datos y Consulte servicios. de proveedor de su mensaje un en acceso de punto de configuraciones recibir Puede Puntos de acceso de servicios. proveedor su con comuníquese datos, de paquete de los servicios a suscripción y disponibilidad sobre detalles obtener Para acceder. desea al que elpara servicio necesario acceso de punto el sobre servicios de proveedor su con Consulte punto de acceso, seleccione seleccione acceso, de punto Nuevo punto acceso Para crearun punto de accesonuevo, seleccione Nombre de conexión de Nombre instrucciones de suproveedor deservicios. Portadordatos de conexión. la indica un punto de acceso para paquete de datos y un un y datos de para paquete de acceso punto un indica d.con. Adm. inalámbrica, pulse y seleccione y seleccione pulse inalámbrica, Sugerencia: Definir pto. acceso pto. Definir : seleccione el tipo de conexión de datos. de conexión de tipo el : seleccione > Para crear un IAP en una LAN LAN una en IAP un crear Para . Para editar las configuraciones de un un de configuraciones las editar Para . WLAN dispon. WLAN : dé un nombre descriptivo para para :descriptivo dé un nombre . Opciones > > Opciones Editar Conect. . Siga las Opciones > > > del centro de mensajes multimedia. mensajes de centro del la dirección o Web la dirección ingrese configurando, está Página de inicio Autenticación servicios. de proveedor el la proporciona normalmente y de datos conexión una Contraseña seleccione dispositivo, el en contraseña su guardar cadanueva vez que tenga acceso al servidor o si no desea contraseña Petición de servicios. proveedor el proporciona lo necesario para hacer una conexiónde datos y normalmente Nombre de usuario servicios. de proveedor su de acceso Nombre punto acceso de Siga su proveedor de servicios. instrucciones las datos de Paquete activarla en su tarjeta SIM. necesario, si fuera y opción, esta admitir debe red de servicios de datos,proveedor el de conexión una Para usar servicios. de proveedor de parte su por instrucción otra haya recibido que a no ser campos vacíos los otros Podrá rojo. dejar asterisco un o con Complete todos los recuadros marcados con con marcados recuadros los todos Complete disponiblesestarán algunos camposparaconfiguraciones. las sólo seleccione, datos que de de la conexión Dependiendo : puede necesitar una contraseña para establecer establecer para contraseña una necesitar : puede : seleccione : seleccione : dependiendo del punto del punto que :de acceso dependiendo : el nombre de usuario puede ser ser puede usuario de nombre el : : si debe ingresar una contraseña contraseña una ingresar debe si : : obtenga el nombre del punto de punto del nombre el : obtenga Normal o Segura Debe definirseDebe . Sí .

Seleccione Seleccione Tipo de red de Tipo siguientes: configuraciones las IP del servidor primario DNS. En En DNS. primario del servidor IP Dirección DNS de su dispositivo. IP Dirección IP teléfono del tipodependen de red seleccionado. IPv6 Configuraciones Buscar redes Buscar de red WLAN Nombre de su deSiga servicios. proveedor las instrucciones LAN inalámbrica Número puerto proxy proxy de Dirección direcciones. estas obtener para Internet servicios de proveedor su con Comuníquese secundario. DNS servidor del IP la dirección de acceso de LAN inalámbrica. LAN de acceso de de punto un dispositivo se necesita no datos directamente; y reciban envíen dispositivos que permitir y para ad hoc red WLAN red de Modo acceso. de punto de dispositivo del configuraciones red WLAN y Opciones : seleccione seleccione : Modo segur.WLAN . Si selecciona una red existente, existente, red una Si selecciona . : en eial iecó aae evdrproxy. dirección: defina lael para servidor DNS primario: DNS : seleccione seleccione : > (para IPv4): ingrese la dirección dirección la ingrese IPv4): (para . Las otras configuraciones . Las otras configuraciones : ingrese el número de puerto proxy. puerto de número el : ingrese : seleccione seleccione : Config. avanzadas Config. Configuraciones IPv4 Configuraciones DNS secundario: son determinados por las son determinados Ad-hoc , ingrese la dirección la, dirección ingrese Ingresar manual. Ingresar paracrear una para cambiar cambiar para o Modo de de Modo , ingrese o 241 Herramientas 242 Herramientas Modo segur.WLAN (longitud de la clave), la clave), (longitud de WEP clave de Config. inalámbrica. LAN acceso de de punto dispositivo para y el tipo su dispositivo entre deel autenticación autenticación de Tipo acceso de LAN inalámbrica. de punto de dispositivo el en configuraciones mismas las Puede hasta crear clavescuatro WEP. ingresar Deberá Clave WEP en uso Las configuraciones de seguridad para seleccionado: seguridad de el modo WLAN seguridad Config. admite. las red si la usar pueden sólo se y WPA 802.1x abierta Red 802.1x configuraciones indicadas por su proveedor de servicios. de proveedor su por indicadas configuraciones Config. plug-in EAP indicadas: configuraciones las Complete o plug-in (EAP) extensible autenticación de protocolo un usar para Modo WPA son como siguen: Hexadecimal Configuraciones de seguridad para para seguridad de Configuraciones formato seleccionado). el en (no para redes ad hoc) o Clave prev. compart. , no se usa la encriptación. Las funciones WEP, WEP, funciones Las encriptación. la se usa no , : seleccione los métodos de autenticación: autenticación: de métodos los seleccione : ) y Clave WEP Clave : seleccione : de seleccione clave el WEP. número : seleccione la encriptación usada: usada: encriptación la : seleccione (sólo para Formato clave clave WEP Formato : ingrese : ingrese : seleccione : seleccione : ingrese la configuraciones para para configuraciones la ingrese : (los datos de clave WEP WEP clave de (los datos para usar una contraseña. contraseña. una usar para Encriptación WEP Encriptación WPA/WPA2 EAP Abierto 802.1x ): ingrese las las ingrese ): WEP son como siguen: son como y o ( . Si selecciona ASCII WPA/WPA2 Compartido o

WEP EAP ,

edatos. de un número de canal (1-11), seleccione seleccione (1-11), de canal número un Canal ad-hoc los puntos de acceso que usan que acceso de puntos los de paquete de datos Las configuraciones todos afectan Paquete de datos Número puerto proxy puerto Número Dirección de proxy Seleccione Seleccione inicio de Página Protocol). Integrity Integridad de Clave Temporal (TKIP, Temporal Key TKIP Encriptación inalámbrica. LAN de acceso de punto de el dispositivo en ingrese una contraseña. Puede in Clave precompartida la subred), subred), la de su dispositivo), IP Configuraciones IPv4 opciones: siguientes Configuraciones IPv6 direcciones. estas obtener para Internet de servicios de proveedor su con Comuníquese y secundario. primario DNS Automático : ingrese las direcciones IP de los servidores DNS DNS servidores los IP de direcciones las ingrese : Gateway predeterm. Gateway Opciones , Conocido (sólo para para (sólo : defina una página de inicio. de página una defina : : ingrese la dirección para el servidor proxy. servidor el para dirección la ingrese : : seleccione si usará el Protocolo de de el Protocolo usará si seleccione : Máscara de subred de Máscara > (sólo para : : ingrese el número de proxy. puerto el número : ingrese > Ad-hoc Dirección IP teléfono Config. avanzadas Config. o Dirección DNS Def. por usuario

): para ingresar manualmente manualmente ingresar para ): una conexión de paquete paquete de conexión una gresar la misma contraseña (el gateway) y Clave prev. compart. Definido por usuario (la de dirección IP : seleccione : seleccione y alguna de las las de alguna y . (la dirección (la dirección Dirección ): ): . las configuraciones avanzadas de LAN inalámbrica. LAN de avanzadas configuraciones las proveedor de servicios en un mensaje de configuración o configuración de mensaje un en servicios de proveedor dedel su servidor seguras configuraciones recibir Puede Configuraciones Buscar redes disponible. inalámbrica LAN una hay disponibilid. Mostrar inalámbrica LAN computadora. su en datos de de paquete acceso como módem usarpara su dispositivo Punto de acceso conexión. dicha necesita que acción o da de paquete de conexión una selecciona Si datos. periódicamente deestablecer una conexión depaquete de trata dispositivo datos, el de paquetes los para cobertura hay Si no rápido. más resulta e-mail) y recibir enviar (por de ejemplo, datos, activa paquete de conexión una registrase dispositivo a la red de depaquete datos. Iniciar datos, el de paquete admite que red una en encuentra datos de paq. Conex. Opciones seleccione avanzadas, configuraciones las ver Para indicador. el y actualiza inalámbricas LAN las busca que el con la dispositivo frecuencia la seleccione > Config. avanzadas Config. : si configura configura : si : necesita el nombre para el punto de de punto el para nombre el necesita : Si es necesario : si selecciona : seleccione si aparece cuando cuando aparece si : seleccione Mostrar disponibilid. Mostrar . No se recomienda cambiar cambiar recomienda se No . tos si inicia una aplicación aplicación una si inicia tos , el dispositivo sólo usará usará sólo dispositivo el , Si está disponible está Si como y se y se Sí , su dispositivo en en dispositivo su en configuraciones estas borrar o ver guardar, Puede USIM. tarjeta su en almacenadas estar pueden configuraciones las Código PIN Código 244. bloqueo", pág. de y PIN códigos de "Glosario Consulte PIN. código del la desactivación no permitan SIM tarjetas algunas que cada vezrequerido el que enciende Es dispositivo. posible PIN código Solicitud SIM y Teléfono 237. pág. "General", en idioma de configuraciones y 144 las delpág. reloj", Consulte "Configuraciones de emergencia. de números de accidental marcación la evitar para emergencia, de los números a similares de acceso códigos use No 244. pág. bloqueo", de y PIN códigos de "Glosario Consulte servicios. de proveedor su con de códigos, olvidar éstos cualquiera comuníquese del números los sólo incluir pueden de o PIN2. códigos bloqueo, PIN Estos códigos los cambiar Seguridad Fecha y hora y Fecha , Código PIN2 Código Config. : cuando está activo, el código es es código activo, el está cuando : y Código de bloqueo de Código 0 al 9 . En caso. En de : puede : puede 243 Herramientas 244 Herramientas un servicio de tarjeta SIM (servicio de red). de (servicio SIM de tarjeta servicio un usando está cuando de confirmación mensajes los mostrar Confirmar serv. SIM dispositivo. el en oficial programado llama hacer posible es usuarios, de cerrado un grupo a limitadas están llamadas las Cuando red). de (servicio llamadas recibir puede y de quienes llamar puede a cuales las Grupo cerr. usuarios dueño. del las como reconocidas SIM tarjetas de las lista una mantiene El dispositivo dispositivo. el en desconocida SIM tarjeta una inserta cuando bloqueo código de elpedir Bloq. si cambia SIM oficial programado oficial llamadas realizarse puedan Cuando el está dispositivo esbloqueado, posible que dispositivo, el desbloquear Para seleccione automático, bloqueo de el período se automá bloquea dispositivo el cual eltras espera de tiempo un automático, bloqueo auto. bloq. Período dispositivo, pulse . Se abre una lista de lista una abre Se . Seleccione comandos. pulse dispositivo, Sugerencia:

en el dispositivo. el en : puede especificar un grupo de personas : puede programar el período de período programar el puede : Para bloquear manualmente el manualmente bloquear Para : para programar su dispositivo puede : puede programar el dispositivo para para dispositivo el programar puede : al número de emergencia emergencia de número al das al número de emergencia de das al número ingrese el código de bloqueo. ticamente. Para desactivar Para ticamente. desactivar Bloquear teléfono Bloquear Ninguno . . código, comuníquese con su proveedor de servicios. proveedor su con comuníquese código, el olvida le Si se dispositivo. del apartado y seguro lugar un en nuevo, bloqueo de código el secreto en Mantenga bloqueo. de el código cambie dispositivo, de su autorizado es predeterminado bloqueo el no admita uso no modo que El deautorizado. de código dispositivo el bloquear para usado ser puede dígitos) cinco (de código este seguridad): de (código bloqueo de Código dispositivo. su de funciones a ciertas acceder para y SIM tarjetas es necesario con ciertas facilitado es dígitos) ocho a cuatro (de código este PIN2: Código UMTS. móviles teléfonos los por admitida es y SIM tarjeta la de mejorada versión una es USIM tarjeta La USIM. con la tarjeta provisto ser puede código UPIN: este Código desbloquearlo. para necesario PUK será código y el bloqueado queda código el seguidas, tres veces PIN código el incorrectamente ingresar Tras SIM. tarjeta la con provisto normalmente es dígitos) (de PIN cuatro a ocho autorizado. no El código uso el contra SIM tarjeta su protege código este PIN: Código servicios. de proveedor su con comuníquese códigos, éstos de cualquiera olvidar de caso En Glosario de códigos PIN y de bloqueo 12345 . Para evitar el uso no . Para evitar descargado edescargado instalado. para asegurarsey de la autenticidad software del es cuando perjudicial software u otro virus de el riesgo reducir desea si utilizados ser deberían También confidencial. información de transferencia la con ver que tienen que acciones realizar para remoto o servidor sitio otro u a banca electrónica conectarse usados si ser deberían Los certificados desea digitales disponibles. los certificados si están personales, lista una ver para de Pulse dispositivo. su en guardados autoridad de certificados los de lista una ver podrá certificados, de administración de principal la vista En software. del el origen verificar para usan se no digitales certificados Los Administración de certificados su dispositivo. en USIM la tarjeta de servicios de proveedor el con comuníquese USIM, tarjeta la con provisto es no código Si el bloqueado. código UPIN un para cambiar necesario es dígitos) ocho (de código UPUK: este Código su dispositivo. en SIM la tarjeta de operador con el comuníquese SIM, tarjeta códigos no son provistos con la los Si respectivamente. necesarios para cambiar bloqueado, o PIN2 código PIN un Códigos PUK y PUK2: estos códigos (de ocho dígitos) son garantizan la seguridad, garantizan de dicho certificado y aparece una de las siguientes notas: siguientes las de aparece una y certificado dicho de la validez se verifica certificado, de un los detalles Al abrir seleccione y certificado a un desplácese certificado, del detalles los Para verificar dispositivo. su en correcto de seguridad certificado el tiene no usted si o auténtica es no servidor del identidad si la notifica le Se verificados. sido han servidor de certificado del de validez período y el la firma cuando servidor de la correcta de un Sólo puede identidad asegurarse autenticidad la verificar certificado: del detalles Ver limitada. Si aparece el texto Si aparece limitada. duración tienen Losseguridad certificados adicional. haya disponible que para o fiables auténticos certificados correctos, poseer debe certificados de administrador sola; por el sí protección clase de ninguna ofrece no certificado de un La existencia obtener todos los beneficios de seguridad mejorada. para correctamente usarse deberán software, instalar reduce el riesgo al establecer conexionesremotas e Importante: del dispositivo sean correctas. sean del dispositivo actuales y fecha hora la que compruebe válido, ser o Certificado no válido no Certificado A pesar de que el uso de certificados de certificados uso el que pesar de A Opciones cuando el certificado debería certificado el cuando >

Certificado caducado Certificado Detalles certificado Detalles

. 245 Herramientas 246 Herramientas • • • • Opciones y seleccione autoridad de certificado un a Desplácese propietario indicado. al realmente pertenece certificado el que y de confianza asegúrese del certificado, configuración cualquier de cambiar Antes Cambiar las configuraciones de seguridad Seleccione Seleccione • • • ejemplo: Por seleccionado. certificado el utilizar pueden certificado, aparecerá una listalas de aplicaciones que Certificado dañado Certificado seleccionado. certificado el para ha empezado no Certificado no válido aún seleccionado. certificado el para Certificado caducado de"Cambiar seguridad",las pág. configuraciones 246. Consulte certificado. el use que para aplicación seguro no Certificado Comuníquese con el emisor del certificado. del emisor el con Comuníquese el origen de una aplicación Java nueva. Java de una aplicación el origen Instalación aplicac. Internet Symbian. operativo sistema de nueva aplicación una de origen el certificar Instalación Symbian

> de que el propietario del certificado del que certificado el plena es de propietario de Opciones > Config. seguridad Config. Sí : el certificadoel : puede certificar los servidores. > Editar config. > : no se puede usar el certificado. certificado. el usar puede se : no > : período : validez ha vencido el de Sí : no ha programado ninguna ninguna programado ha no : Sí : el certificado puede certificar certificar puede certificado el : : el certificado : elpuede certificado : el período de validez aún aún validez de período el : . Dependiendo del del Dependiendo . para cambiar el el valor. cambiar para activa, seleccione en activadaen o desactivada, seleccione seleccione seleccione entrantes, rechace o estécuando llamadas ocupado número deseada. desvío Para desviar dellamadas voz cuando su de opción la y desviar desea que llamadas las Seleccione servicios. de proveedor su con comuníquese detalles, obtener Para telefónico. número otro voz u de buzón su a llam. Desvío autenticación. la para los plug-ins usan WPA seguridad de modo y datos de portador un como inalámbrica LAN usan que Internet a acceso de puntos Algunos red). de (servicio dispositivo su en instalados están que EAP plug-ins los ver Puede EAP Plug-ins archivos. los de distribución la registrar para el usar identificador puede música de archivo del archivo. El proveedor o desvía el si envía música de archivo el con identificador envíe el se que permitirá si Selecciona transacción. de identificador un incluir pueden copyright por restringidos música de archivos Algunos protegido objeto Rastrear Desvío de llamadas de Desvío Si estáocupado le permite desviar sus llamadas entrantes entrantes sus llamadas desviar le permite Verificar estado . Para verificar si la opción está está si opción la verificar . Para . Para configurar la opción Activar o Cancelar . llamadas a ciertos números de emergencia oficial. de emergencia a números ciertos llamadas realizar puede restringidas, están llamadas las Cuando tiempo. al mismo activas estar pueden no de llamadas y desvío llamadas de restricciones Las in llamadas, todas las ne oosady ardUT sidcd o . por indicada es UMTS La red standby. modo el en redes GSM y UMTS. La red GSM es indicada por las entre automáticamente alternar puede dispositivo Su Restric. llam. standby. modo el en aparece tiempo. mismo al activas estar pueden de no llamadas de y Las restricción desvío llamadas llamadas las desviar Al la vez. a estar activas pueden desvío de Varias opciones seleccione estado seleccione activa, está opción si la verificar Para deseada. llamada de restricción de la opción Seleccione servicios. de proveedor su de restricción de contraseña la necesita configuraciones, las cambiar Para dispositivo. el por recibidas realizadas o llamadas . Para configurarla en activada o desactivada, o desactivada, activada Para en configurarla . Red Restricción de llamadas Activar (servicio de red) le permite restringir las las restringir permite le red) de (servicio o Cancelar cluso las de datos. de las cluso . Restric. llam. Restric. afecta a Verificar Verificar de célula. de información de recepción la activar para y Network) Celular (MCN-Micro microcelular red la tecnología basada en es usado cuando muestre una reddispositivo en celular Mostrar info. célula info. Mostrar local. celular su red con de roaming un acuerdo tener debe seleccionada red La una red. a seleccionar vuelva que pedirá error y le de tono un emitirá el dispositivo manualmente, seleccionada red a la la conexión pierde redes. Si de lista una de red la o disponibles redes las de una y seleccionar buscar desea que dispositivo el Selección operador detalles. más obtener para servicios de proveedor su con Comuníquese móviles. servicios de los proveedores entre roaming de acuerdos los y red la de parámetros los según automáticamente, dual Modo móviles lo admite): seleccione la red que usará. Si selecciona red de Modo el uso de los servicios de otros proveedores. otros de servicios los de uso el de servicios de un proveedor a los usuarios facilita dos o entre que de servicios más proveedores Glosario: , , el usa las dispositivo redes GSM o UMTS (sólo aparece si el proveedor de servicios Un acuerdo de roaming es un acuerdo acuerdo un es roaming de Un acuerdo Manual : seleccione : seleccione : seleccione : seleccione para seleccionar manualmente manualmente seleccionar para Automática Activar para que el para configurar 247 Herramientas 248 Herramientas segundos. segundos. Si ha elprogramado tipo de timbre a conteste entrante tras cinco una automáticamente llamada auto. Respuesta 234. pág. tonos", configurar "Perfiles: Consulte dispositivo. a su accesorio cierto conecta vez que Modo predet. opciones: siguientes Pulse Pulse y usando Si está seleccione tiempo programado. un lucestras permanezcan encendidas o si se apagarán Luces para disponible está no automática respuesta La Bluetooth lib. Man. un que Seleccione y conectado que se ha perdido la conexiónque el auriculara un auricular no Bluetooth. estáo disponible compatible indica un auricular que está conectado y En elstandby, modo TTY o Silencio indica queundispositivo auditivo compatibleestá > (para el equipo para auto): para configure que las Usar TTY Configuraciones de accesorios , la respuesta automática queda desactivada. Equipo auricular : configure el perfil que desea activar cada activar cada desea que perfil el : configure TTY > : configure si desea que el dispositivo dispositivo el que desea si configure : Sí , deberá activarlo en su dispositivo. dispositivo. su en activarlo deberá , o . Herram. Equipo para auto TTY , está conectado. está Adaptador audífono Adaptador > Config. de y alguna las > Accesorios Un bip Un TTY , TTY .

> , abreviaturas y acrónimos. cortos, muy nombres Evite como texto. usar de voz Relación NTSC. de televisor sistema Opciones seleccione aplicación, la iniciar para usar se pueda que voz aplicación Nueva seleccione lista, la a aplicaciones más agregar Para la lista. en o que aparece de perfil aplicación la nombre standby modo el en el pronuncie de comando voz. El comando de voz es el y pulsada mantenga mejorados, y perfiles. Para depara las aplicaciones voz comandos usar o y SECAM PAL televisor de Com. voz aplicaciones y perfiles, pulse y seleccione y seleccione pulse perfiles, y aplicaciones iniciar para mejorados voz de comandos los activar Para 188. pág. voz", por admitidos por mejorados su dispositivo, consulte "Marcación de voz los comandos sobre más información Para obtener de controlar voz para su dispositivo. usar los comandos Puede deSistema TV opciones: siguientes las de alguna Pulse y de televisor Configuración seleccione Comandos de voz Comandos : seleccione : seleccione > > Cambiar comando Perfiles : seleccione . . Para comando de agregar un segundo . de El voz crea etiquetas dispositivo 4:3 Herram. ó PAL 16:9 NTSC para los formatos de sistema eingrese el nuevo comando e > . SalidaTV de para el formato de para formato de el Herram. . Seleccione . Seleccione Opciones > > como un archivo adjunto de e-mail o usando la conectividad conectividad la o usando e-mail de adjunto archivo un como multimedia, mensajes en o enviar exploración la durante descargar compatible, computadora una desde dispositivo su a transferir pueden se instalación de archivos Los sistema para el apropiados y software aplicaciones Otras • basa J2ME™ Las aplicaciones • dispositivo: su en y software aplicaciones de tipos dos y seleccione Pulse seleccione voz, de los comandos de configuraciones las cambiar Para Opciones seleccione de voz la sintetizada, etiqueta Para escuchar Restablecer adapt. voz adapt. Restablecer seleccione voz, de reconocimiento de aprendizaje el seleccione dispositivo, del seleccionado idioma el en reconocidos sintetizadorque reproduce lasetiquetas de voz y comandos al número al oficialde de número modelo este producto. se refieren frecuencia con software de Los proveedores Nokia. dispositivo su para diseñado específicamente de instalación ). Los archivos software Sólo instale .sis. extensión la tienen ( Symbian operativo ). ( o .jar .jad extensión la con diitao eaplicaciones Administrador de > Opciones Sintetizador Reproducir > Herram. Configuraciones . . > Desactivar > das en la tecnología Java™ Java™ la tecnología das en Adm. aplic. . Para reprogramar Para . reprogramar . Para desactivar el Puede instalar elimine el mensaje del buzón de entrada de Mensajes. de entrada de buzón del mensaje el elimine mensaje, un de adjunto el es .sis archivo el Si dispositivo. del de memoria la de instalación archivos los para retirar archivos de el administrador use luego PC compatible, una en de instalación los archivos seguridad de de copias hacer PC Nokia para Suite utilice memoria, suficiente Para tener deello el otros impedir podrá archivos. almacenamiento memoria, de cantidades grandes usar pueden archivos los en quedarán la delque dispositivo. Considerando memoria (.sis) instalación de los archivos compatible, memoria Trasinstalación la aplicacionesde en una tarjeta de local). (disco memoria de tarjeta una en el archivo guarde archivo, un transferir para Explorer Windows usa Microsoft Si dispositivo. su en aplicación una instalar para PC Suite Nokia en Installer Application Nokia usar Puede o infrarrojos. Bluetooth idc n piain.i, uaalccó aa compatible. memoria Java, aplicación una .sis, y aplicación una instalada, indica completamente sido ha no aplicación la que y software Instalar aplicaciones qel piainet ntld nuatarjeta de una aplicación que la está instalada en prueba de Javaprueba Verified la pasaron que o las Symbian aplicaciones las como seguridad, ofrecen que fuentes de software Importante: Instale y utilice sólo las aplicaciones y aplicaciones las sólo utilice y Instale TM . 249 Herramientas 250 Herramientas 1 las aplicaciones para instalar .jar es necesario El archivo • o reparación actualización una con archivo un instala Si • • Para mostrar los detalles del certificado de seguridad de seguridad certificado del detalles los Para mostrar • Para verel tipo de aplicación, número de versión y el • Antesinstalar, de tenga cuenta en lo siguiente: seleccione seleccione y pulse instalación, de archivo un localizar Para aplicación. la de o fabricante proveedor al estos datos solicitar Puede al servidor. para acceder usuario del contraseña archivo .jar, puede ser necesario que ingrese el nombre y el descargando esté Cuando uno. seleccione que indica le se aplicación, la para definido acceso de punto hay Si no descargue. lo que indica le dispositivo el tiene, lo Si no Java. copia de seguridad. la o de original instalación la de del archivo aplicación la reinstale y aplicación la primero elimine original, la aplicación Para restaurar eliminado. de software paquete del seguridad de completa copia una o original instalación de archivo el tiene si original aplicación restaurar la podrá sólo existente, aplicación una de 245. pág. certificados", de "Administración Consulte de la aplicación, seleccione seleccione aplicación, la de de memoria (si está insertada) en en insertada) está (si memoria de la tarjeta en o dispositivo del la memoria en busque Opciones seleccione la aplicación, de fabricante o proveedor > Herram. Ver detalles Ver > Adm. aplic. . Opciones Adm. arch. Adm. Como alternativa, Como > Ver certificado Ver o abra un un o abra . seleccione seleccione operaciones, estas lugar tuvieron cuándo y eliminados de soft los paquetes ver Para Web seleccione aplicación, la sobre adicionales datos ver y red de conexión una iniciar Para . y pulse en el menú localícela instalada, aplicación una iniciar Para (sólo disponible con las configuraciones de e-mail correctas). de e-mail configuraciones las con disponible (sólo Opciones para poder ver qué ha sido instaladoeliminado, o seleccione ayuda de a mesa una instalación de su registro Para enviar 2 seguro del origen deseguro y contenido aplicación. la si está instalación la Sólo aviso. un continúe muestra aplicaciónfirmasinuna digital o certificado, el dispositivo una instalando Si está la instalación. de estado el sobre información muestra dispositivo el instalación, la Durante instalación. la iniciar para pulse y instalación de archivo al desplácese aplicaciones, mensaje en En En elarchivo de instalación. , si disponible. está Adm. aplic. deje de funcionar. de deje dispositivo el que o causar operación y rendimiento el afectar puede antivirus funcionalidad de aplicaciónantivirus. Tener de una más aplicación Importante: > Opciones Enviar registro Mensajes , seleccione Su dispositivo puede admitir sólo una admitir puede Su dispositivo > Ver registro > > Buzón entrada Vía mensaje corto ware que han sido instalados, han sido que ware Opciones Opciones . > > Instalar Ir a dirección dirección a Ir que contenga o Vía e-mail . En otras otras . En

detalles, consulte la documentación del paquete de software. del paquete documentación la consulte detalles, obtener Para funcionar. de deje que puede eliminó, que software paquete de dependede del software paqueteSi otro con dicho software. creados los documentos abrir pueda ya no que posible es software, de paquete un Si elimina eliminó. que software de paquete del completa seguridad de copia o una original software de paquete el si tiene reinstalarlo sólo podrá software, el elimine Cuando Eliminar Seleccione Seleccione Configuraciones Desplácese al paquete de software y seleccione software y Eliminar aplicaciones o datos adicionales. En la vista principal de En principal la vista adicionales. datos o componentes descargar para específico acceso de punto un a red de conexión una o mensaje un enviar telefónica, llamada una requerir Java pueden aplicaciones Ciertas línea. en certificados los verificar al usada Dirección Web pred. aplicación. una instalar de antes línea en certificados en línea certif. Verif. opciones: siguientes aplicación específica. aplicación Suite y seleccione a aplicación la desplácese para cambiar las configuraciones asociadas a la la a asociadas configuraciones las cambiar para . Seleccione Seleccione . Opciones : programe la dirección predeterminada la dirección programe : Sí > : seleccione para verificar los verificar para : seleccione paraconfirmar. Configuraciones Opciones y alguna de las y alguna Adm. aplic. Adm. Opciones > Config.

> activación no y no válida activación de clave una seleccione multimedia, archivo para un de uso Para más tiempo de uso o comprar laprolongar duración el dispositivo. en conectados Claves sin usar pero está no conectadaclave lade activación. en el dispositivo protegido multimedia un hay archivo o límite su a llegado ha multimedia archivo el para uso de válidas no Claves activación. de período su ha comenzado no para las y cuales claves las multimedia archivos más o válidas Claves Clave activ. , seleccione guardados en su dispositivo, pulse digitales derechos de activación de claves las ver Para contenido. otro y de timbre) tonos (incluso música transferencia o desvío modificación, de imágenes, la copia, impedir pueden de copyright Las protecciones eatvcó us . y pulse activación de clave una a desplácese el archivo, enviar para capacidad y validez de estado como detalle, en información ver Para 179. pág. Web", de servicio "Mensajes Consulte desactivado. está mensajes de recepción para Web servicio el si de activación claves las actualizar puede No archivos protegidos por copyright de activación para Claves y alguna de las siguientes opciones: las siguientes de y alguna : ver claves que no tienen archivos multimedia : ver clavesque tienen no : ver: claves están que conectadasuno a : ver claves que no son válidas, el son válidas, período no ver que : claves Opciones > Obtener clave activac. Obtener Herram. >

251 Herramientas 252 Solución de problemas R: P: Bluetooth Conectividad R: P: responde no que aplicación Una R: P: de acceso Códigos y Respuestas Preguntas Solución de problemas la conectividad Bluetooth. conectividad la activada tienen ambos dispositivos que de Asegúrese amigo? mi dispositivo de el encontrar puedo no qué ¿Por y pulse aplicación la hasta desplácese Luego . pulsada mantenga ventana, de cambiar para aplicación la abrir Para no responde? que aplicación cierro una ¿Cómo servicios móvil. de proveedor o (ISP) de Internet servicios comerciales de proveedor con su proveedor de de acceso,punto por ejemplo, un sobre contraseñas, información comuníquese Para obtener red. de con su proveedor de lo ha recibido, servicios comuníquese código se o no o ha extraviado PIN acuerda o PUK, un Si no su dispositivo. de distribuidor el con comuníquese bloqueo, código de el extraviado ha El código de bloqueo original es PUK? o PIN bloqueo, de contraseña para los códigos es mi ¿Cuál para cerrar la aplicación. para cerrar 12345 . Si no se acuerda o se acuerda. no Si R: P: R: P: Cámara R: P: explorador del Servicios Si tiene otro dispositivo cone dispositivo otro tiene Si Bluetooth? conexión finalizar una no puedo qué ¿Por dispositivos. dos los entre compatibilidad la Verifique oculto. modo el en está programado no otro dispositivo el que de Asegúrese entre losni obstrucciones dispositivos. es más 10 metros no existen yde (33 pies) que paredes no la distanci que de Asegúrese de la cámara esté limpia. limpia. esté cámara la de lentes los de protectora ventanilla la que de Asegúrese cámara. la y pantalla la de protector plástico el Quite borrosas aparecenqué las imágenes? ¿Por instrucciones. obtener con su proveedor Comuníquese de servicios para correctas. explorador las configuraciones de Inserte Servicios. de configuraciones en Defínalo válido. aparece: simensaje este hago ¿Qué Conect. Seleccione Bluetooth. conectividad la desactivando desactivar la conexión elusando otro dispositivo o > Bluetooth > Desactivado a entre los dos dispositivos a entre ctado a su dispositivo, puede Sin punto de acceso acceso de punto Sin . ? R: P: Pantalla R: P: R: P: R: P: activados o desactivados. Esto es normal; no es un defecto. pantallas podrían contener píxeles o puntitos que permanecen de de pantalla. tipo Algunas este esEsto una característica dispositivo? mi enciendo que cada vez o luminosos descoloridos la pa aparecen en ¿Por qué estabilización. de marco con video sin comparación else el en degrada modo cada la de esto, a de calidad video. Debido estabilización la se activa cuando VGA al tamaño VGA del dentro pequeño más tamaño un de es ampliado de video marcoCada video? de estabilización la activa se cuando dentados aparecen videomarcos VGA los de ¿Por qué video. o la imagen de ruido de nivel el aumenta cambio, En brillo. mejor proveer para normal modo el usar iluminación más es amplificado con el modo nocturno que al rendimientoEl delimagen sensor decondiciones bajo poca de normal? modo el con comparación en iluminación poca de condiciones bajo fondo de más ruido tienen nocturno modo el con capturados o videos las imágenes ¿Por qué allos lentes grabar. de movimiento por el producido ruido mecánico el eliminar Zoom óptico durante grabación durante óptico Zoom Seleccione mecánico. ruido el AF causa y zoom de lentes los de El movimiento óptico? y zoom automático enfoque de uso la función cuando la cámara de viene ruido que un escucho ¿Por qué Opciones ntalla puntitos faltantes, faltantes, puntitos ntalla > > Configuraciones Desactivar para > varios elementos y una de estas notas aparece: aparece: notas estas de y una elementos varios está borrando datos. Si para borrar los respectiva aplicación la dato, desplácesea otro o cualquier juegos de puntajes costo llamadas,de de llamadas, de cronómetros contadores agenda, de notas contacto, de Para borrar información en fotos y Imágenes • Páginas Web almacenadas • Mensajes de e-mail recuperados de la memoria del dispositivo • uno a uno (comience con los elementos más pequeños). con los elementos uno (comience uno a o datos. antes Elimine operación. efectuar para memoria R: P: Registro R: P: (UPnP) doméstica Red • Mensajes de las carpetas carpetas las de Mensajes • R: P: Memoria baja Memoria baja. Elimine datos. Para ver todos los eventos, seleccione seleccione eventos, los todos ver Para haya sido registrado. filtro a este aplicable comunicación de evento ningún y un filtro activado haya que Puede Registro? el vacío está ¿Por qué UPnP. con es compatible otros dispositivo el que Opciones contenido Comp. red Seleccione doméstica. de configuraciones las haya programado que de Asegúrese ¿Por qué no puedo compartir archivos con otros dispositivos? para evitar consumir toda la memoria: la toda consumir evitar para Puedeborrar los siguienteselementos regularmente baja? memoria la dispositivo tiene hago si mi ¿Qué Enviados en > Filtrar Mensajes > > Compartir contenidoCompartir Galería Toda comunicación Buzón entrada , trate de eliminar los elementos Conect. Personal > Red domést. Red No hay suficiente suficiente hay No , . Borrador y asegúrese y asegúrese > Registro y

> > 253 Solución de problemas 254 Solución de problemas P: R: P: multimedia Mensajes R: P: Mensajería compatible. de memoria tarjeta una en datos Guarde • a un Bluetooth conexión una usando datos Envíe • imágenes a de dirección Envíe e-mail su y luego guarde • de seguridadcopias de para hacer Suite PC Nokia Use • R: P: ¿Qué está sucediendo? sucediendo? está ¿Qué nota La Detalles memoria grupos degrupos datos, seleccione diferentes los consumen memoria y cuánta tiene datos de Eliminemensaje. antes algunos datos. error: de mensaje este en indica se necesaria memoria de cantidad La llena? memoria la tiene que puesto multimedia mensaje un recibir no puede teléfono el cuando hacer debería ¿Qué tarjetaa lade contacto en necesaria información la Agregue e-mail. dirección de una o teléfono de número un tiene no contactos de tarjeta La contacto? ningún seleccionar puedo no qué ¿Por sus datos usando uno Guarde borrarlos? de mis datos antes guardar puedo ¿Cómo dispositivo compatible. computadora. su en imágenes las compatible. una computadora todos los datos en Recuperando mensaje Recuperando No hay memoria suficiente para recuperar el el recuperar para suficiente memoria hay No . Contactos d.arch, Adm. de los siguientes métodos: los siguientes de aparece brevemente. brevemente. aparece . > Para ver qué ver tipo Para Opciones > R: P: R: multimedia a la red. la a multimedia de mensajes conexión no hará ninguna dispositivoel cambio, este de Después entrantes. multimedia mensajes los Recuperación multim. Recuperación usted. a enviarlos espera para en multimedia mensajes los borra multimedia mensajes de centro el y red, la a información de notas enviar necesita dispositivo el cambio, este Tras entrantes. multimedia mensajes los todos Al recibir mensaje recibir Al el mensaje ahora,seleccione a información enviar la red. Para que aún tendrá recuperar dispositivo el cambio, este de Después configuraciones. en por ejemplo, tras las otro momento, recuperarlo verificar para mensaje el guarde multimedia mensajes de centro Al recibir mensaje recibir Al seleccione datos, de conexión una hacer de deje dispositivo el que Para dispositivo empieza repetidamente dicha conexión? el datos cuando de la conexión finalizar puedo ¿Cómo Opciones úeo eeóio direcciones. Seleccione números telefónicos o existan errores en los no correctamente programadas y de que que las configuraciones de mensajería multimedia estén multimedia del centro de mensajesmultimedia. Asegúresede El dispositivo está tratando de recuperar un mensaje > Mensajes Configuraciones > > y alguna de las siguientes opciones: Rechazar mens.Rechazar Aplazar recuper. Aplazar > Desactivada > Recuperar inmed. Recuperar Mensaje multimedia Mensaje : para rechazar : : para ignorar todos : para que el Mensajes . > R: P: inalámbrica LAN R: P: PC de Conectividad su dispositivo Nokia. dispositivo su en creado un punto de accesoInterneta WLANparala red correcto un SSID si sabe oculto el SSID usan que y ha redes oculto servicios de conjunto de unpuntouseque identificador el accesoEs posible WLAN de alcance? de área del dentro está que sé cuando aun (WLAN) inalámbrica LAN acceso de punto ver un no qué puedo ¿Por Latinoamérica. http://latinoamerica.ext.nokia.com/pcsuite www.nokiausa.com/support Nokia Web área sitio el respaldada) en archivos un en acerca deinformación su PC (por Suite ejemplo, descargar NokiaSuite PC en el DVD-ROM. Puede encontrar más para usuario del manual el PC. Consulte su en funcionando y está está instalado Nokiaque PC Suite de Asegúrese PC? a mi dispositivo el conectar al problemas tengo qué ¿Por para Estados Unidos y para Estados Unidos

(SSID). Sólo puede acceder a acceder puede Sólo (SSID).

para

Para apagar la búsqueda en segundo plano: segundo en Para apagar la búsqueda R: P: 3 2 1 redes WLAN disponibles como de costumbre. costumbre. de como disponibles redes WLAN usar las puede todavía redes disponibles,Nokia y reconoce Cuando que su dispositivo Nokia no busque redes disponibles. busque Nokia no dispositivo su que especificar batería,de puede consumo reducir el Para dispositivo Nokia. su en la WLAN desactivar No puede dispositivo Nokia? mi (WLAN) en la LAN inalámbrica ¿Cómo desactivo Para guardar sus cambios, seleccione seleccione cambios, sus guardar Para Seleccione Pulse y seleccione LAN inalámbrica LAN Buscar redes Buscar redes está configurado en . Herram. > Nunca > . Config. Nunca Hecho > , su dispositivo dispositivo , su . Conexión > 255 Solución de problemas 256 Seguridad del producto tiempo, se descargará paulatinamente. descargará tiempo, se por un utiliza no se cargada completamente batería batería. Si una la sobrecarga podría de acortar la vida útil la que puesto completamente, cargarla tras cargador cuandoesténoen uso. No dejela batería conectada al del dispositivo y eléctrico el enchufe cargador del Desconecte batería. la de carga la iniciar para conectar a volver y desconectar luego y cargador el conectar necesario ser batería ha usada por prolongado,no un podríasido tiempo la o si vez primera por de repuesto batería una Si utiliza dispositivo. este para recárguelas sólo con los aprobadoscargadores por Nokia y Nokia por aprobadas baterías las únicamente Utilice dela batería. lo normal, cambie más cortos notablemente Cuando los dey de conversación reservatiempos sean descargar cientos de veces, con elpero tiempo se gastará. y batería se cargar puede y La descarga. de carga completos de dos o tres solamente después ciclos nueva se obtiene batería una de óptimo rendimiento El recargable. batería de una través a eléctrica alimentación recibe Su dispositivo Carga y descarga sobre las baterías Información Seguridad del producto en temperaturas temperaturas en inferiores deal punto congelación. limitado se ve particularmente batería de la rendimiento El la cuando batería seaun encuentre cargada. completamente o caliente fría dejar puede de funcionar temporalmente, demasiado la batería con dispositivo °F). Un 77 y °F (59 25 °C y °C 15 los entre siempre batería la mantener Intente la capacidad, reducirá de útil vida y rendimiento carga. o en invierno, en verano cerrado completamente vehículo un en como o fríos, calientes batería lugares la en deja Si a ella. conectado esté que objeto o el la batería dañar puede terminales las de cortocircuito El cartera. o bolsillo su en repuesto batería de una lleva cuando ejemplo, por ocurrir, batería).Puede la en metálicas tiras parecen (Éstas la batería. (-) de negativo (+) y positivo terminales los de directa la conexión ocasiona bolígrafo un o clip moneda, una como metálico objeto si un accidental cortocircuito un producirse Puede batería. la en cortocircuito cause No dañados. están o lasi batería el cargador nunca No utilice diseñada. fue que el para propósito el para solamente batería la Utilice llamada. alguna realizar poder de o antes la pantalla aparezca carga en de indicador el que de antes minutos pocos unos pasar podrían descargada, está completamente la batería Si dispositivo enestá dispositivo el modo standby. el cuando minutos y 45 hora 1 aproximadamente toma el AC-4 cargador con la bateríacarga de La dispositivo. del uso carga y la red, de las condiciones de dependiendo variarpodrían y estimaciones son de operación Los tiempos de (VGA, de reproducción video 30fps) 180 minutos • 30fps) (VGA, video captura de de minutos 120 • megapíxeles) (3.2 fotos 330 • música de reproducción de tiempo de 6,7 horas • y hasta conversación de tiempo de horas 2,3-3,7 • y hasta conversación de tiempo de horas 4,5-5,1 • La batería BP-6M provee hasta: Tiempos de funcionamiento domésticos. desperdicios los con de éstas disponga No posible. sea que siempre bateríasconformelas normativas a locales.Recíclelas las Elimine dañadas. están si explotar pueden También explotar. pueden que puesto baterías, las incendie No ne modo desconectado el en red WCDMA una en funciona cuando reserva de tiempo días de 7,5-10 red GSM una en funciona cuando reserva de tiempo días de 8,9-10 Nokia cercano di o a un más autorizado servicio de al centro llévela y usarla evite Nokia, de y original batería auténtica es no batería su que creer razón para alguna la batería. Si tiene de la autenticidad totalmente asegura no pasos los cuatro éxito con Realizar pasos: los siguientes la etiqueta holográfica realizando e empaque inspeccione el en Enhancements Original Nokia logotipo el busque un de cómprela Nokia, de Para estar está que seguro bateríaadquiriendo una auténtica seguridad. su para Nokia de auténticas baterías use Siempre Nokia baterías de autenticación la para Normas 1 Autenticación del holograma deautenticidad la batería, devuélvala al lugar de compra. la verificar de imposibilidad la Ante autenticidad. su confirmar para batería la inspeccionará Nokia servicio de o centro Nokia distribuidor Su asistencia. pedir para otro ángulo. desde Enhancements Original Nokia logo el y ángulo un desde Nokia: las manos conectadas de símbolo el ver debe etiqueta, la en el holograma mirar Al

distribución autorizado por Nokia, Nokia, por autorizado distribución stribuidor Nokia autorizado Nokia stribuidor 257 Seguridad del producto 258 Seguridad del producto 4 3 2 en instrucciones las siguiendo de 20 dígitos código del la validez Confirme por fila superior seguido la fila inferior. de la el número con empezando lee se dígitos 20 de El código hacia arriba. miren los números que forma tal de la batería Gire 12345678919876543210. ejemplo por dígitos, 20 de código un revelar para delado la etiqueta el Raspe respectivamente. lado cada en puntitos 4 y 3 2, 1, veráarriba abajo,derecho, y izquierdo, lado el hacia ángulo un a el holograma mueve Cuando pr Latinoamérica). (para verifiquesubateria check www.latinoamerica.nokia.com/ www.nokia.com/battery (para EE.UU) y y EE.UU) (para

www.latinoamerica.nokia.com/verifiquesubateria • No utilice ni guarde el dispositivo en lugares sucios sucios lugares en dispositivo el guarde ni utilice No • la humedad lluvia, La seco. dispositivo el Mantenga • garantía. su de cobertura la seincluyenque a continuación le ayudarán a proteger Las sugerencias cuidado. con tratarse debe y excelentes fabricación y de diseño producto un es dispositivo Su mantenimiento y Cuidado consulte consulte originales Nokia, las baterías sobre información más Para dispositivo. al aplicable o garantía aprobación cualquier anular puede También, sus accesorios. y dispositivo su a perjudicar y inferior rendimiento un en resultar aprobada podría fabricante por peligroso y podría ser no el o distribuidor pedir para El asistencia. deuso batería una Llévela al centro de servicio autorizado Nokia más cercano en la etiqueta es una batería auténtica de Nokia, no la use. el batería que Nokiasu holograma con confirmar puede Si no ¿Qué ocurre si la batería no es auténtica? pr Latinoamérica). (para electrónicos podrían dañarse. podrían electrónicos y Las movibles piezas los componentes polvorientos. o colocarla. a volver para completo por extraiga la batería y espere el seque que dispositivo se moja, se dispositivo Si el electrónicos. circuitos los oxidar pueden que minerales contienen líquidos los y www.nokia.com/battery (para EE.UU).y

• Utilice únicamente la antena suministrada o una de de o una suministrada antena la únicamente Utilice • cualquier limpiar para y seco limpio suave, paño un Use • las obstruir puede La pintura dispositivo. el pinte No • disolventes perjudiciales, químicos productos No utilice • el dispositivo. bruscamente ni mueva golpee caer, No deje • Abra siempre el de acuerdo dispositivo las con • el Cuando fríos. lugares en dispositivo el guarde No • calurosos. lugares en dispositivo el guarde No • de radio. dispositivos uso de el sobre los reglamentos e infringir dispositivo dañar no aprobados el podrían accesorios o modificaciones de antenas, aprobada. El uso repuesto y de proximidad luz). de detectores los y de la cámara de lente el (como lente apropiado. funcionamiento un impedir e movibles piezas dispositivo. el limpiar para fuertes ni detergentes delicadas. más mecánicas piezas y las internos circuitosde placas las romper Los bruscosmanejos pueden manual. en este figuran que instrucciones electrónicos. circuitos los de placas las dañar cual puede lo interior, su en humedad formarse puede normal, temperatura su recupera dispositivo plástico. de tipos algunos o derretir deformar y baterías las dañar electrónicos, los dispositivos de útil vida la reducir pueden temperaturas altas Las servicio especializado más cercano. más especializado servicio a no llévelo Si su centro dispositivo de funciona, algún batería,para su dispositivo, cargador accesorio. o cualquier manera de igual aplican se recomendaciones estas Todas apague reprograme, se el dispositivo que permitir Para • que datos de los seguridad de copias siempre Haga • intemperie. la a cargadores los use No • mínima de 2,2 centímetros (7/8 de pulgada) del cuerpo. Al del cuerpo. de pulgada) (7/8 centímetros de 2,2 mínima distancia una a o portado oído del cerca funcionamiento de normal posición su en usado es cuando RF exposición de normas las reúne dispositivo Este funcionamiento. de normal posición su en dispositivo el Use peligro. o interferencia causar pueda o cuando utilizarlo prohibido esté cuando dispositivo su apague siempre y encuentra se la zona donde en vigente especial Respete la normativa Entorno operativo niños. los de alcance fuera del Manténgalos Su dispositivo y accesorios pueden contener partes pequeñas. seguridad adicional de Información seguridad de los datos que quiere guardar. quiere que datos los de seguridad copias de Haga siempre óptimo. rendimiento obtener para cuando en retire vez la batería de y dispositivo el servicio. de centro un a dispositivo su enviar de antes agenda) de notas y contactos (como guardar desea 259 Seguridad del producto 260 Seguridad del producto qio esbe a eae xensd radiofrecuencia. equipos sensibles las a señales externas de utilicen probable que en los hospitales y centros de salud se Es indique. le se donde salud de centros los de específicos en el los lugares dispositivo Apague radiofrecuencia. de externas las señales contra protegido correctamente si esta determinar o para pregunta alguna tiene si con un médico o con el fabricante médico del dispositivo médicos que no estén protegidos adecuadamente. Consulte móviles, pueden interferir con el funcionamiento de equipos teléfonos los incluso radio, de transmisión de aparatos Los Dispositivos médicos borrarse. puede almacenada la información ya que dispositivo, del cerca magnético almacenamiento de artículos ni otros crédito de tarjetas No coloque el dispositivo. por atraídos ser pueden metálicos materiales Los magnéticas. son dispositivo partes del Las haya finalizado. transmisión la que hasta separación de las distancias sobre anteriores instrucciones las seguir de Asegúrese adecuada. conexión la disponible esté que hasta demorarse pueden mensajes o datos de archivos de la transmisión casos, algunos En calidad a la red. de conexión requiere una dispositivo este o mensajes, de datos archivos transmitir Para cuerpo. indicada del arriba a la distancia dispositivo el coloquen que y metal contengan no que accesorios sólo utilice o soporte, cinturón clip de estuche, un como en accesorios, el teléfono portar o protegidos, como los sistemas electrónicos de inyección, inyección, de electrónicos los sistemas como protegidos, o instalados bien no estén que motor de vehículos de electrónicos sistemas los a afectar RF pueden señales Las Vehículos servicios. de proveedor su con ese caso, comuníquese En auditivos. aparatos determinados con interferir pueden digitales móviles dispositivos Algunos Aparatos auditivos su dispositivo. apagar deberá inmediatamente interferencias, existen que para sospechar razón alguna tiene Si al en el oído el dispositivo contrario utilizar Deben • superior bolsillo el en dispositivo el llevar deben No • de más de distancia una siempre mantener Deben • Las Research). con marcapasos: personas Technology (Wireless móvil telefonía en tecnológica Investigación la de y recomendaciones independiente investigación de la provienen consejos Estos interferencias. posibles evitar de fin a marcapasos, el y móvil teléfono el entre pulgadas) (6 centímetros 15,3 de mínima distancia fabricantesLos marcapasosde recomiendan manteneruna Marcapasos marcapasos para minimizar las posibles interferencias. posibles las minimizar para marcapasos camisa la de marcapasos su y el teléfono entre pulgadas) (6 centímetros 15,3 teléfono móvil y puede ser ilegal. ser puede y móvil teléfono del red la interrumpir avión, del funcionamiento el para peligroso resultar puede aeronave una en teledispositivos de El uso vuelo. un embarcar de antes dispositivo el Apague aeronave. una de a bordo dispositivo su de uso el prohíbe Se graves. lesiones ocasionar puede despliegan, se aire de bolsas las y instalado bien está no móvil telefonía de equipo el Si móvil. teléfono del portátiles piezas y las instalado sobre la zona deningún objeto, despliegue incluidos el equipo fuerza. coloquecon mucha No sobre las bolsas de aire ni automóviles con bolsas de aire, recuerde que éstas se inflan los Para o accesorios. piezas sus al dispositivo, destinado compartimiento el en mismo explosivos ni materiales gases transporte líquidos inflamables, debidamente. No almacene ni su vehículo esté correctamente montado y funcionando de móvil dispositivo del completo equipo el que regularidad con Compruebe al dispositivo. aplique se que garantía son correctas, pueden resultar peligrosas y anular cualquier instalarlo en no Siun vehículo. la o reparación instalación o dispositivo el reparar debe calificado personal Sólo posteriormente. incorporado haya que equipos de los o su vehículo de o representante fabricante el con aspectos estos verifique información, más obtener aire. Para de bolsas de y sistemas velocidad de de control electrónicos sistemaselectrónicos de frenosantibloqueo (ABS), sistemas partículas como grano, polvo o partículas metálicas. partículas o grano, polvo como partículas o ambientesquímicos aire donde el contiene elementos propano o (como licuado butano) petróleo gas de y áreas usan que vehículos químicos, productos de almacenamiento o de transferencia instalaciones barcos, los de cubierta bajo marcadas, perono siempre con claridad.Estas incluyen zonas estar suelen explosiones producirse pueden donde entornos donde se realiceny explosiones. químicasplantas en zonas Las de y distribución áreas combustible, de almacenamiento de depósitos combustible, en radio los de dede equipos uso restricciones las Respete gasolineras. o servicio de estaciones de cerca como combustible de abastecimiento de lugares en dispositivo Apague el la muerte. daño corporal incluso o en resultar pueden que o incendios explosiones producir pueden zonas tales en chispas Las vehículo. su de motor el apague que requiriéndole reglamentarios avisos existan explos con potencial Las zonas todas y obedezca explosiones producirse puedan donde áreas en el dispositivo Apague explosivos Entornos potencialmente ivo incluyen las zonas donde donde zonas las ivo incluyen las señales e instrucciones. instrucciones. e señales las 261 Seguridad del producto 262 Seguridad del producto Llamadas de emergencia Llamadas de manual o a su proveedor de servicios. de proveedor o a su manual este consulte información, más obtener Para emergencia. de efectuar llamada una poder antes de desactivarlas necesite que puede activas, están funciones Si algunas 4 3 2 1 emergencia: llamada de realizarPara una us atca . la tecla Pulse localidad. cada en variar pueden emergencia de números Los encuentre. se que la en localidad la de emergencia de número el Ingrese borrar para necesario sea veces cuantas llamadas. las para dispositivo el preparar y pantalla la Pulse dispositivo. el en instalada debidamente válida esté que SIM tarjeta una podríanredes requerir Ciertas adecuada. sea señal la de intensidad la que Compruebe enciéndalo. apagado, está el dispositivo Si como emergencias médicas. importantes, comunicaciones para móvil dispositivo un de únicamente dependa Nunca condiciones. garantizar laque conexión puede se no lo tanto, Por usuario. por el programadas funciones y terrestres redes inalámbricas, de radio, redes con señales dispositivo, funcionan Importante: Los teléfonos móviles, incluso este este incluso móviles, teléfonos Los funcione en todas las las todas en funcione estar muy por debajo del valor máximo debido a que el el que adebido máximo valor del por debajo muy estar puede funcionamiento en dispositivo un de actual SAR todasen las bandas de frecu certificado nivel de potencia al máximo transmite dispositivo el mientras estándar, funcionamiento de posiciones en realizan SAR se de pruebas Las tejido corporal. de gramos 10 sobre (V/kg) promediado vatios/kilogramos 2,0 de es ICNIRP internacionales normas las en estipulado SAR de El límite Rate). Absorption Specific (SAR, Absorción de Específica Tasa como conocida unidad una con mide se móviles dispositivos para exposición de estándar El índice y salud. edad la de independientemente para diseñado garantizar la seguridad del público, de e un ICNIRP seguridad margen incluyen independiente organización la por desarrolladas fueron normas Estas internacionales. normas las por recomendados radiofrecuencia Está diseñado para no sobrepasar los límites de exposición a radiorreceptor. y radiotransmisor un es móvil dispositivo Su EXPOSICIÓN SOBRE A ONDAS DE RADIO. NORMAS LASESTE DISPOSITIVO CUMPLE CON MÓVIL Información de certificación (SAR) instrucciones de hacerlo. de instrucciones No un accidente. finalice en llamada la hasta recibaque comunicación de medio único el ser puede móvil dispositivo Su posible. precisión mayor la con necesaria información la toda entregue de emergencia, llamada una realizar Al encia comprobadas. El nivel nivel comprobadas. El encia su uso su el probado fue para dispositivo cuando valor SAR máximo el ICNIRP,estándares los red. Según de base estación a una de número factores como su proximidad un de dependiendo cambia cantidad La red. la a acceder para requerida la potencia usar sólo para sido diseñado ha dispositivo eatrzcó e qiouad aI C:QVVRM-55. la ID FCC: equipo usando del autorización de http://www.fcc.gov/oet/fccid en se puede este dispositivo encontrar sobre información La V/kg. de1,23 es cuerpo, el con contacto en está cuando V/kg y 0,69 de oído es al junto uso para probado fue cuando producto, del la certificación durante estándar, este bajo suministrada información la según máximo (TAE) SAR El valor tejido corporal. de gramo 1 sobre promediado V/kg 1,6 de SAR límite un establecen requerimientos Estos Canadiense. (EE.UU.) la Industria y Commission) Communications (Federal Comunicaciones de Federal la Comisión por establecidos fueron cuales los radio de a las ondas exposición la rigen que requerimientos los reunir para diseñado está móvil dispositivo Su (texto en inglés). sección de información de productos en la en provista ser podría SAR sobre adicional Información red. de banda la y de nacionales evaluación y información de requisitos los según variar pueden SAR de Los valores SAR. de valores diferentes en resultar puede accesorios de El uso

junto al oído es de 0,54 V/kg. 0,54 es de al oído junto después de localizar el sistema www.nokia.com . Información técnica Información ucó Especificación Tamaño Peso Función funcionamiento de Temperatura Voltaje de batería transmisor del salida de Potencia de frecuencia Rango Volumen: 8,12 pulg. 1100 mAh BP-6M batería la con oz.) (6,35 gramos 180 14°F hasta + 131°F + hasta 14°F cc V 3.7 Vatios Hasta 2 (RX) MHz 2110-2170 (TX) MHz 1920-1980 2100 WCDMA (RX) MHz 1930–1990 (TX) MHz 1850–1910 1900 GSM (RX) MHz 1805–1880 (TX) MHz 1710–1785 1800 GSM (RX) MHz 925–960 (TX) MHz 880–915 900 GSM mm) (28,2 pulg. 1,11 Espesor: mm) (55,5 pulg. 2,19 Ancho: mm) (118,2 pulg. 4,65 Longitud: (-10°C hasta + 55°C) hasta (-10°C 3 (133 cm (133 3 ) 263 Seguridad del producto 264 Índice archivos svg multimedia archivos sisarchivo oficina de aplicaciones aplicaciones aplicaciónayuda de altavoz alarmas agenda dispositivo de administrador administrador de derechos digitales, derechos de administrador archivos de administrador directos accesos A Índice rebobinar 210 rebobinar 209 archivo formatos de 210 desactivar sonido 210 avanzar 249 Java instalar 249 144 alarma 205 Suite PC sincronización 205 entradas crear consulte claves activación de 144 DRM 249 163 140 150 228 149 225 buzón de voz de buzón remoto correo de buzón correo de buzón borrar pantalla cámara borrar caché, C Bluetooth B desviar llamadas al buzón de voz de 246 al buzón llamadas desviar 187 telefónico número el cambiar recuperar automáticamente 181 automáticamente recuperar Consulte 218 vincular 217 seguridad de dispositivodirección 218 219 desactivar conectar dos dispositivos, dos conectar 248 auricular configuraciones de programación programación de configuraciones de cámara de configuraciones 156 color luz y ajustar vincular 218 vincular de imagen 156 de imagen 155 fija imagen 215 203 187 modo standby modo 179 179 código de seguridad de código bloqueo de código sonido de clips claves activación de certificados canciones códigos UPUK código UPIN código PIN código código PIN2 244 PIN2 código PIN 244 código 244 seguridad de código bloqueo de código Consulte transferir 169 156 temporizador secuencia de modo 156 139 imagen de modo guardar videoclips 151 156 flash 156 escenas editar videos 160 configuraciones grabadora de video configuraciones 243 153 244 245 244 245 código de bloqueo 158 244 251 configuraciones PC conexiones datos de paquete de conexiones datos de conexiones computadora de conexiones USSD comandos voz de comandos servicio de comandos restricciones de llamadas 247 de llamadas restricciones acceso de 240 puntos pantalla 238 de protector dispositivo 233 el personalizar 238 pantalla 237 idioma 243 y hora fecha 246 llamadas desviar originales 238 configuraciones 240 datos de conexiones 216 Bluetooth conectividad acceso de 243 códigos 245 UPUK código 244 UPIN código PIN 244 código 244 bloqueo de código 245 certificados agenda 206 242 configuraciones 142 indicadores 224 finalizar 224 detalles 215 174 248 174 215 configuraciones de conexión de configuraciones auricular de configuraciones audífono de configuraciones copiar seguridad de copia control de volumen e-mail editar videos editar E registro del duración directorio sonido desactivar D durante una llamada 187 llamada una durante 144 altavoz contactos entre la tarjeta SIM y y SIM tarjeta la entre contactos ver archivos adjuntos 180 adjuntos archivos ver 180 correo de buzón del recuperar 181 automáticamente recuperar 183 configuraciones 179 remoto correo de buzón abrir 180 personalizar videoclips 160 videoclips personalizar 160 transiciones agregar efectos 160 agregar sonido 160 clips de agregar Consulte 176 memoria del dispositivo 199 del memoria tarjetas detarjetas contactos 210 148 143 197 248 248 240 etiquetas de voz de etiquetas enviar Internet indicadores I hora H galería G archivo de formatos fecha favoritos F 144 realizar llamadas 189 llamadas realizar videoclips 161 videoclips de tarjetas de contactos, tarjetas Consulte Consulte presentaciones 163 ordenar enarchivo álbumes 163 TV 162 salida de modo archivos de seguridad copias de compartirlínea en 164 209 RealPlayer .sis 249 250 249, .jar 249 .jad 144 158 201 negocios 198 negocios 172 142 servicios 248 265 Índice 266 Índice llamadas llamada de video dellamada multiconferencia de llamada marcación por voz marcación fija marcación libres manos M inalámbricaLAN L Java J transferencia 194 transferencia recibidas 195 195 marcados números 187 internacionales 196 duración desviar para configuraciones 239 configuraciones rechazar 194 194 contestar seguridad 221 seguridad 225 IAP crear consulte también también consulte punto de configuraciones consulte consulte Consulte llamadas 246 llamadas and Play de acceso 241 de acceso altavoz manos libres manos altavoz aplicaciones 199 145 189 188 Universal Plug Plug Universal 187 modos standby modo demodo remoto SIM módem menú,reorganizar multimedia mensajes mensajes de voz mensajes de texto mensajería memoria rápida marcación PC Suite pausa P tapa cerrada cerrada 138 tapa tapa abierta 139 vista 140 de modo 139 imagen 176 multimedia mensajes mensajes detexto 176 e-mail 176 escribir 149 memoria de consumo ver memoria 149, 195 borrar duración borrar 196 ver datos de la memoria del del la memoria datos de ver transferir archivos de música a la de 205 agenda datos 144 226 dispositivo 149 dispositivo tarjeta de memoria 168 233 187 188 233 176 217 176 puntos de acceso Internet (IAP) acceso Internet de puntos acceso de puntos deprotección copyright personalización perfiles muvees películas, reproductor de video de reproductor música de reproductor llamadas de registro reloj registro doméstica red radio FM radio R Quickoffice Q 144 Consulte 240 configuraciones activación de claves consulte muvees rápidos 212 Consulte 169 música transferir 144 configuraciones alarma 144 Consulte 197 filtro borrar contenido 197 207 234 207 228 puntos depuntos acceso RealPlayer registro 146 235 240 168 tarjeta SIM tarjeta memoria de tarjeta T sonidos sonido software sincronización servicios S copiar nombres y números al al números y nombres copiar 193 timbre de un tono silenciar grabar sonidos 227 249 dispositivo al archivo un transferir explorador 201 teléfono 199 teléfono 224 148 transferir contenido desde otro desde otro contenido transferir de timbre tonos temas de contactos tarjetas transferir música transferir insertar imagen 198 imagen insertar tonos 195 DTMF guardar 198 enviar 199 y números nombres 182 mensajes tono de timbre personal 200 timbre de tono 179 texto de mensaje un en recibir 235 dispositivo 169 141 198 Web W Visual Radio videoclips V Play Plug and Universal U puntos de acceso, consulte consulte acceso, de puntos 208 contenido ver 209 visual servicio de ID seguridad 221 de acceso de 158 207 146 puntos puntos 267 Índice Notas

268 Notas

269 Notas

270 Notas

271 Notas

272