Pre-Cut Ready to Install Kits Year • Make • Model Specific Oldsmobile Cars 1930-1988

1935-2014 Oldsmobile Cars Ram/Dodge Truck Catalog 1930-1988 Automotive Thermal Acoustic Insulation Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

•Reduce Road Noise •Reduce Exhaust Harmonics Pre-Cut Ready to Install Kits •Eliminate Mechanical Noise Year • Make • Model Specific •Stop Body Panel Vibration •Reduce Radiated & Reflected Heat •Stop Audio System Vibration The Coolest Cars Have QuietRIDE Inside! ™

Roof Kit Under Hood Cover and Insulation Kits Roof & Quarter Panels Kits are available for these Vehicles are available for these Vehicles above beltline. (Sold See AcoustiTrunk Catalog See AcoustiHood Catalog Separately)

Trunk Floor Kit Trunk Floor & Tire Well Firewall Insulator Fits under dash against the firewall bulkhead.

Body Panel Kit All Panels below the beltline including Package Tray, Seat Divider, Rear Wheel Wells, Fenders, Rear Quarters and Door Kit Floor Kit Tail Panels (As Required) All Doors Front Floor, Rear Floor, Transmission Hump/ Driveline

Cowl Kit Panels between the firewall and front door of the vehicle.

Everything in One Box to Do the Job Right! Pre-Cut, Ready To install Kits are Year, Make and Model Specific and include: •Dynamat Xtreme Order Line: 888-777-3410 •Heat Shield Barrier Insulation Tech Line: 209-942-4777 •Spray Adhesive •Seam Tape Fax: 877-720-2360 •Illustrated Instructions 1122 S. Wilson Way Ste. #1, Stockton CA, 95205

OldsmobileRam/Dodge Cars Truck Catalog Automotive Thermal Acoustic Insulation 1949-57 Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

Introducing a multi-stage, automotive insulation and sound damping system to give Oldsmobile cars the “quiet riding comfort” found in today’s new cars. AcoustiSHIELD kits are designed on current “state-of-the-art” auto acoustic technology, to insulate and control the noise, vibration and heat in the passenger cabin. Kits are pre-cut and come with easy-to-follow installation instructions-----everything you need to do the job right. Oldsmobile Cars Trunk Floor Mats for Antique, Classic, Street Rods and Custom Cars Catalog

Smooth Trunk Covers - 3-D Molded Hood Covers For That Custom Look • 3-D molded raised letter graphics • Tough, vinyl floor mat material Watch our “How To” video on the Installation of a typical • AcoustiShield pre-cut, AcoustiTrunk Cover and Insulation ready to install insulation kit • Hundreds of popular cars Go to: youtube.com/quietridesolutions • Simple installation

1949-52 Oldsmobile

Most vehicles have little or no insulation in the rear trunk area of the vehicle which allows the vibration and noise from the trunk floor pan to enter the passenger cabin. Now you can stop that noise, vibration and heat and dress up the trunk areas with a AcoustiTrunk Floor Mat and Insulation Kit.

1955-57 Oldsmobile Kits are available for these Vehicles See AcoustiTrunk Catalog

General Motors Trademarks and Trade Dress used under license to QuietRIDE Solutions LLC. Order Line: 888-777-3410 Tech Line: 209-942-4777 Fax: 877-720-2360 1122 S. Wilson Way Ste. #1, Stockton CA, 95205 For more information contact us at: [email protected] ©2003-21 •Prices Subject to Change Without Notice 1949-52 Oldsmobile 88 Coupe Complete AcoustiShield Insulation Kit OLDS 4952-CAK88 Automotive Thermal Acoustic Insulation Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Floor Kit

Door Insulation Included with Complete Kit

Part # Dewcription MSRP OLDS 4952-CAK88 1949-52 Oldsmobile 88 Coupe Complete Insulation Kit 801 OLDS 4952-CBPK88 1949-52 Oldsmobile 88 Coupe Body Panel Kit 145 OLDS 4952-CCK88 1949-52 Oldsmobile 88 Coupe Cowl/Dash Kit 101 OLDS 4952-CFK88 1949-52 Oldsmobile 88 Coupe Floor Kit 260 ASU-DDBIK-2 Universal 2-Door OLDS 4952-CRK88 1949-52 Oldsmobile 88 Coupe Roof Kit 145 Damper/Barrier Insulation Kit OLDS 4952-CTK88 1949-52 Oldsmobile 88 Coupe Trunk Kit 146 For Coupes, Convertibles, Trucks with upholstered door panels. Includes ASU-DDBIK-2 Universal 2 Door Damper Kit 67 Dynamat Xtreme damper pads, Weather- Other Product for Oldsmobile Cars Barrier Insulation, double-sided foam tape (Sold Separately) and Instructions. Easy to Install. OLDS 4900-98-C 1949 Oldsmobile Series 98 Firewall Insulator 298 OLDS 4951-7688R-C 1949-Early 1951 Oldsmobile Series 76-88-88A 308 OLDS 5000-98-C 1950 Oldsmobile Series 98 Firewall Insulator 298 OLDS 5000-HOL-C 1950 Oldsmobile Holiday Firewall Insulator 298 OLDS 5100-88S-C 1951 Oldsmobile Super 88 Firewall Insulator (Late) 298 OLDS 5200-8898-C 1952 Oldsmobile Super 88-98 Firewall Insulator 298 There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. 1949-52 Oldsmobile 88 Convertible Complete AcoustiShield Insulation Kit OLDS 4952-CVAK88 Automotive Thermal Acoustic Insulation Cowl Kit Floor Kit

Body Panel Kit

Trunk Floor Kit

Door Insulation Included with Complete Kit

Part # Dewcription MSRP OLDS 4952-CVAK88 1949-52 Oldsmobile 88 Convertible Complete Insulat. Kit 680 OLDS 4952-CVBPK88 1949-52 Oldsmobile 88 Convertible Body Panel Insulat. Kit 145 OLDS 4952-CVCK88 1949-52 Oldsmobile 88 Convertible Cowl/Dash Insulat. Kit 101 OLDS 4952-CVFK88 1949-52 Oldsmobile 88 Convertible Floor Insulation Kit 260 OLDS 4952-CVTK88 1949-52 Oldsmobile 88 Convertible Trunk Insulation Kit 146 ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit ASU-DDBIK-2 Universal 2 Door Damper Kit 67 For Coupes, Convertibles, Trucks with Other Product for Oldsmobile Cars upholstered door panels. Includes (Sold Separately) Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape OLDS 4900-98-C 1949 Oldsmobile Series 98 Firewall Insulator 298 and Instructions. Easy to Install. OLDS 4951-7688R-C 1949-Early 1951 Oldsmobile Series 76-88-88A 308 OLDS 5000-98-C 1950 Oldsmobile Series 98 Firewall Insulator 298 OLDS 5000-HOL-C 1950 Oldsmobile Holiday Firewall Insulator 298 OLDS 5100-88S-C 1951 Oldsmobile Super 88 Firewall Insulator (Late) 298 OLDS 5200-8898-C 1952 Oldsmobile Super 88-98 Firewall Insulator 298

There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. 1949-52 Oldsmobile 88 Sedan Complete AcoustiShield Insulation Kit OLDS 4952-SAK88 Automotive Thermal Acoustic Insulation Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Floor Kit

Part # Dewcription MSRP OLDS 4952-SAK88 1949-52 Oldsmobile 88 Sedan Complete Insulation Kit 875 OLDS 4952-SBPK88 1949-52 Oldsmobile 88 Sedan Body Panel Insulation Kit 145 OLDS 4952-SCK88 1949-52 Oldsmobile 88 Sedan Cowl/Dash Insulation Kit 101 OLDS 4952-SFK88 1949-52 Oldsmobile 88 Sedan Floor Insulation Kit 260 ASU-DDBIK-4 Universal 4-Door OLDS 4952-SRK88 1949-52 Oldsmobile 88 Sedan Roof Insulation Kit 145 Damper/Barrier Insulation Kit OLDS 4952-STK88 1949-52 Oldsmobile 88 Sedan Trunk Insulation Kit 146 For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper ASU-DDBIK-4 Universal 2 Door Damper/Barrier Insulation Kit 131 pads, WeatherBarrier Insulation, double- Other Product for Oldsmobile Cars sided foam tape and Instructions. Easy to Install. (Sold Separately) OLDS 4900-98-C 1949 Oldsmobile Series 98 Firewall Insulator 298 OLDS 4951-7688R-C 1949-Early 1951 Oldsmobile Series 76-88-88A 308 OLDS 5000-98-C 1950 Oldsmobile Series 98 Firewall Insulator 298 OLDS 5000-HOL-C 1950 Oldsmobile Holiday Firewall Insulator 298 OLDS 5100-88S-C Late 1951 Oldsmobile Super 88 Firewall Insulator 298 OLDS 5200-8898-C 1952 Oldsmobile Super 88-98 Firewall Insulator 298 There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. 1952-53 Oldsmobile 98 Coupe Complete AcoustiShield Insulation Kit OLDS 5253-CAK98 Automotive Thermal Acoustic Insulation

Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Door Damper Barrier Kit

Trunk Floor Kit

Part # Dewcription MSRP OLDS 5253-CAK98 1952-53 Oldsmobile 98 Coupe Complete Insulation Kit 815 OLDS 5253-CBPK98 1952-53 Oldsmobile 98 Coupe Body Panel Kit 145 OLDS 5253-CCK98 1952-53 Oldsmobile 98 Coupe Cowl/Dash Kit 101 ASU-DDBIK-2 Universal 2-Door OLDS 5253-CFK98 1952-53 Oldsmobile 98 Coupe Floor Kit 260 Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks OLDS 5253-CRK98 1952-53 Oldsmobile 98 Coupe Roof Kit 145 with upholstered door panels. Includes OLDS 5253-CTK98 1952-53 Oldsmobile 98 Coupe Trunk Kit 146 Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67 and Instructions. Easy to Install. Other Product for Oldsmobile Cars (Sold Separately) OLDS 5200-8898-C 1952 Oldsmobile Super 88-98 Firewall Insulator 298 OLDS 5300-8898-C 1953 Oldsmobile Series 88-98 Firewall Insulator 298 OLDS 5300-98-C 1953 Oldsmobile 98 Fiesta Firewall Insulator 298 There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. 1952-53 Oldsmobile 98 Convertible Complete AcoustiShield Insulation Kit Automotive Thermal Acoustic Insulation OLDS 5253-CVAK98

Cowl Kit Front Floor Kit Trunk Floor Kit

Body Panel Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Door Damper Barrier Kit Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Part # Dewcription MSRP OLDS 5253-8898-CVAK98 1952-53 Oldsmobile 98 Convert Complete Insulation Kit 683 OLDS 5253-8898-CVBPK98 1952-53 Oldsmobile 98 Convert Body Panel Insulation Kit 145 OLDS 5253-8898-CVCK98 1952-53 Oldsmobile 98 Convert Cowl/Dash Insulation Kit 101 OLDS 5253-8898-CVFK98 1952-53 Oldsmobile 98 Convert Floor Insulation Kit 232 OLDS 5253-8898-CVTK98 1952-53 Oldsmobile 98 Convert Trunk Insulation Kit 146 OLDS 5253-DDBIK-2 1952-1953 Oldsmobile 2-Door Damper/Barrier Insulation Kit 67 Other Product for Oldsmobile Cars (Sold Separately) OLDS 5200-8898-C 1952 Oldsmobile Super 88-98 Firewall Insulator 298 OLDS 5300-8898-C 1953 Oldsmobile Series 88-98 Firewall Insulator 298 OLDS 5300-98-C 1953 Oldsmobile 98 Fiesta Firewall Insulator 298

There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. 1952-53 Oldsmobile 98 Sedan Complete AcoustiShield Insulation Kit OLDS 5253-SAK98 Automotive Thermal Acoustic Insulation Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Door Damper Barrier Kit

Trunk Floor Kit

Part # Dewcription MSRP OLDS 5253-SAK98 1952-53 Oldsmobile 98 Sedan Complete Insulation Kit 875 OLDS 5253-SBPK98 1952-53 Oldsmobile 98 Sedan Body Panel Insulation Kit 145 OLDS 5253-SCK98 1952-53 Oldsmobile 98 Sedan Cowl/Dash Insulation Kit 101 ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit OLDS 5253-SFK98 1952-53 Oldsmobile 98 Sedan Floor Insulation Kit 260 For 4-Door Sedans with upholstered door OLDS 5253-SRK98 1952-53 Oldsmobile 98 Sedan Roof Insulation Kit 145 panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- OLDS 5253-STK98 1952-53 Oldsmobile 98 Sedan Trunk Insulation Kit 146 sided foam tape and Instructions. Easy to ASU-DDBIK-4 Universal 4- Door Damper/Barrier Insulation Kit 131 Install. Other Product for Oldsmobile Cars (Sold Separately) OLDS 5200-8898-C 1952 Oldsmobile Super 88-98 Firewall Insulator 298 OLDS 5300-8898-C 1953 Oldsmobile Series 88 Firewall Insulator 298 OLDS 5300-98-C 1953 Oldsmobile 98 Fiesta Firewall Insulator 298 There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. 1955-57 Oldsmobile Coupe Complete AcoustiShield Insulation Kit OLDS 5557-CAK Automotive Thermal Acoustic Insulation Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Floor Kit

Part # Dewcription MSRP OLDS 5557-CAK 1954-56 Oldsmobile 88 Coupe Complete Insulation Kit 815 OLDS 5557-CBPK2 1954-56 Oldsmobile 88 Coupe Body Panel Insulation Kit 145 OLDS 5557-CCK 1954-56 Oldsmobile 88 Coupe Cowl/Dash Insulation Kit 101 OLDS 5557-CFK 1954-56 Oldsmobile 88 Coupe Floor Insulation Kit 260 OLDS 5557-CRK 1954-56 Oldsmobile 88 Coupe Roof Insulation Kit 145 OLDS 5557-CTK 1954-56 Oldsmobile 88 Coupe Trunk Insulation Kit 146 ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67 ASU-DDBIK-2 Universal 2-Door Other Product for Oldsmobile Cars Damper/Barrier Insulation Kit (Sold Separately) For 2-door Coupes, Convertibles, Trucks OLDS 5556-8898-C 1955-1956 Oldsmobile 88-98 Firewall Insulator 308 with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- OLDS 5700-8898-C 1957-1957 Oldsmobile 88-98 Firewall Insulator 308 Barrier Insulation, double-sided foam tape OLDS 5557-8898-SD 1955-1957 Oldsmobile 88-98 Seat Divider 127 and Instructions. Easy to Install. OLDS 5557-8898-PKG 1955-1957 Oldsmobile 88-98 Package Tray 99 OLDS 5557-8898-CSP 1955-1957 Oldsmobile 88-98 Cowl Panel Set 68

There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. 1955-57 Oldsmobile 88-98 Convertible Complete AcoustiShield Insulation Kit Automotive Thermal Acoustic Insulation OLDS 5557-CVAK

Cowl Kit Front Floor Kit Trunk Floor Kit

Body Panel Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Part # Dewcription MSRP OLDS 5557-CVAK 1955-1957 Oldsmobile 88 Convert Complete Insulation Kit 683 OLDS 5557-CVBPK2 1955-1957 Oldsmobile 88 Convertible Body Panel Insulation Kit 145 OLDS 5557-CVCK 1955-1957 Oldsmobile 88 Convert Cowl/Dash Insulat. Kit 101 OLDS 5557-CVFK 1955-1957 Oldsmobile 88 Convert Floor Insulation Kit 260 OLDS 5557-CVTK 1955-1957 Oldsmobile 88 Convert Trunk Insulation Kit 146 ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67 Other Product for Oldsmobile Cars (Sold Separately) OLDS 5556-8898-C 1955-1956 Oldsmobile 88-98 Firewall Insulator 308 OLDS 5700-8898-C 1957-1957 Oldsmobile 88-98 Firewall Insulator 308 OLDS 5557-8898-SD 1955-1957 Oldsmobile 88-98 Seat Divider 127 OLDS 5557-8898-PKG 1955-1957 Oldsmobile 88-98 Package Tray 99 OLDS 5557-8898-CSP 1955-1957 Oldsmobile 88-98 Cowl Panel Set 68 There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. 1955-57 Oldsmobile 88-98 Sedan Complete AcoustiShield Insulation Kit OLDS 5557-SAK Automotive Thermal Acoustic Insulation Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Floor Kit

Door Insulation Included with Complete Kit

Part # Dewcription MSRP OLDS 5557-SAK 1955-1957 Oldsmobile 88 Sedan Complete Insulation Kit 875 OLDS 5557-SBPK4 1955-1957 Oldsmobile 88 Sedan Body Panel Insulation Kit 145 OLDS 5557-SCK 1955-1957 Oldsmobile 88 Sedan Cowl/Dash Insulation Kit 101 OLDS 5557-SFK 1955-1957 Oldsmobile 88 Sedan Floor Insulation Kit 260 OLDS 5557-SRK 1955-1957 Oldsmobile 88 Sedan Roof Insulation Kit 145 ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit OLDS 5557-STK 1955-1957 Oldsmobile 88 Sedan Trunk Insulation Kit 146 For 4-door Sedans with upholstered door ASU-DDBIK-4 Universal 4 Door Damper/Barrier Insulation Kit 131 panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- Other Product for Oldsmobile Cars sided foam tape and Instructions. Easy to (Sold Separately) Install. OLDS 5556-8898-C 1955-1956 Oldsmobile 88-98 Firewall Insulator 308 OLDS 5700-8898-C 1957-1957 Oldsmobile 88-98 Firewall Insulator 308 OLDS 5557-8898-SD 1955-1957 Oldsmobile 88-98 Seat Divider 127 OLDS 5557-8898-PKG 1955-1957 Oldsmobile 88-98 Package Tray 99 OLDS 5557-8898-CSP 1955-1957 Oldsmobile 88-98 Cowl Panel Set 68 There are multiple Firewall Insulator options for this vehicle. Please see related firewall pages in this catalog. Compare the photos to your stock firewall. Oldmobile Cars Stop Engine Heat at the Source 1930-1988

Made Right - To Fit Right -- To Stop Engine Heat

Your first line of defense againstengine noise, vibration and heat is the Firewall Insulator panel--it is the barrier be-tween the engine bay and the passenger cabin. Quiet Ride Firewall Insulators fit like a glove because they match the contours of the stock steel firewall. There are no gaps to allow noise and heat to move into the passenger cabin. All of our firewall insulator panels are manufactured from original panels that cusomers have allowed us to use over the last 30 years. Each panel is molded from a leather-grained ABS material and vacuum formed from our own molds to exact OEM factory specifications. Trim welts and rubber carpet skirts are sewn as reqired. A neoprene rubber is used for late model vehicles to meet factory specifications.

Restoration Firewalls* Custom Firewalls* Firewalls are cut and punched with standard factory If you are building a “restomod” or custom vehicle, holes and are shipped ready-to-install with the appro- any of our firewall insulator products can be ordered priate “period” insulation attached. Save and reuse with Heat Shield insulation and without holes for a your original mounting pins. Universal pins are avail- “smooth” look. Custom firewall panels can be in- able should you need them. stalled with contact adhesive or by using our Street Rod Firewall Mounting Pin Kit. *Technical Note: If you have changed the OEM firewall (asside from welding up the mounting and equipment pass-through holes) you may have to look for alternative solutions. Call for suggestions and information.

Molded to fit over the transmission hump and into heater wells, using the highest quality materials Order Line: 888-777-3410 available. Tech Line: 209-942-4777 Fax: 877-720-2360 1122 S. Wilson Way Ste. #1, Stockton CA, 95205 For more information contact us at: [email protected] ©2003-121 •Prices Subject to Change Without Notice Firewall Insulators--A Historical Perspective The Firewall Insulator is the first line of defense against automotive Noise, Vibration and Heat that is generated in the engine bay of the vehicle. QRS manufactures more than 600 firewall products for antique, classic, custom and street rod cars and trucks. The company has developed these products based on “out of car” original insulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact reproductions of OEM products. Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil impregnated cardboard cover in combination with a number of insulation materials. In 1964 General Motors and Ford Motor Company began using a “spray-on” rubber material bonded to a thin layer of “shody” insulation. All of the company’s firewall products are vacuum form molded to fit the firewall and transmission contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System for accurate fitting. Each firewall cover is backed with period correct insulation which could include a black fiberglass or HeatShield barrier insulation.

Firewall Colors and “Sheen” Just a word about the “look” of your old firewall in comparison to a new one--you may may note that the new firewall does not look the same as your original--because of the “sheen.” The firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean and sparkling fresh. With few exceptions, firewall insulators were black when they came from the factory. There were some exceptions in the General Motors product line from 1933 through 1941 in which the firewall insulators were a “mocha brown” color. The firewall color would typically match the -col or of your clutch, brake and accelerator pedal rubber pads. QRS Firewall Insulators are shipped Black, but are easily painted with an interior vinyl plastic spray paint like SEM. Mounting Pins and Clips

American Cars and Trucks used a wide variety of mounting pins, clips, buttons and screws to attach the firewall insulator to the interior of the steel firewall bulkhead. Clean up and reuse your original mounting pins if you have them. We offer the following mounting pins and information based on what we have been able to find available.

UMPS-10 Universal Mounting Pins 20 If your original firewall mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a plastic “Christmas tree” type pin with a 1/2” button “head” that will fit most 5/16 inch holes. Kit includes 10 pins.

UWC-MPL-10 Universal Wire Cap Mounting Pin--Long 10 A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Long shank (1/2 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins.

UWC-MPS-10 Universal Wire Cap Mounting Pin--Short 10 A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Short shank (1/4 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins.

UPPS-20 Universal Upholstery Panel Pin Set 30 If your original upholstery panel mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a short-shank plastic “Christmas tree” type pin with a 1/2 inch “head” that will fit 5/16 inch holes. Kit includes 10 pins.

FORD 3541- Early Ford Firewall Mounting Pins--Long 3 MPL These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 3/4 inch in length. The Long pin works best in the 1935-41 cars and may be used on cars through the mid-fiftys.

FORD 3541- Early Ford Firewall Mounting Pin--Short 3 MPS These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 1/2 inch in length. The short pins work best for the 1942-48 Ford cars and 1940-47 Ford trucks and may be used on trucks through the mid-fiftys.

FORD RB-MP Late Model Ford Firewall Mounting Pins--Rubber Bullet Style 3 These all Rubber Bullet Style Ford mounting pins were used on FOMOCO products starting in 1969. These are an exact reproduction of the original.

GM 5500-MP GM Firewall Plastic Firewall Mounting Plugs 3 General Motors started using a plastic firewall mounting plug to attach the insulator to the steel firewall bulkhead in 1955 for trucks and 1957 for cars. These plugs are still used in many GM vehicles today.

SRMP-9 Street Rod Mounting Pin Kit 34 With this new mounting pin kit, you can smooth your firewall by welding closed the firewall mounting holes and install any of our insulator panels for that “smoothie look.” This kit will give you the option to place the firewall mounting pins where they will fit your application best. Be sure to order your firewall insulator “No Holes” when you place your order. Kit Includes 9 pinsets and instructions.

R-83-56 Early and Mid-Year 1932 Ford 14.95 Correct insulator panel to dash mounting screws for early and mid-year 1932 passenger car, wagon and sedan delivery. Per Ford Engineering release documents, the correct slotted flat head screws (1/4-20 x 1 3/16), locks, hex nuts and cup washers. Finished in black oxide. Kit includes 12 Sets (48 pieces.) Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com.

R-07-01 Ford Original Shoulder Bolts for mid-to-late 1932 through 1935 Cars/Trucks 5.95 Ford special slotted truss head shoulder screw, painted in Ford S-2 finish. Period correct insulator panel to dash Truss head/Shoulder mounting bolts for mid- to-late 1932-35 car, wagon and sedan delivery. Per Ford Engineering release documents. Kit includes one Shoulder screw, 1/4 lock and 1/4-20 hex nut. FYI: 12 required for 1932 Vehicles and 14 required for 1933-35 vehicles. Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com. Oldsmobile

Product Application Codes and Price Sheet

Part # Descriptions MSRP GM-A & GM-G Body Cars 1964-1988 OLDS 3000-C1 1930 Oldsmobile F-30 Type 1 Firewall Insulator 216 See our GM-A and GM-G Catalogs for additional OLDS 3000-C2 1930 Oldsmobile F-30 Type 2 Firewall Insulator 216 products OLDS 3100-C 1931 Oldsmobile F-31 Firewall Insulator 216 GMA 6467-HC 1964-67 GM A-Body Firewall Insulator Heater only 205 OLDS 3200F-C 1932 Oldsmobile F-32 Firewall Insulator 216 GMA 6467-HVAC 1964-67 GM A-Body HVAC Firewall Insulator 205 OLDS 3200L-C 1932 Oldsmobile L-32 Firewall Insulator 256 GMA 6872-HC 1968-72 GM A-Body Firewall Insulator Heater only 205 OLDS 3300-C 1933 Oldsmobile Firewall Insulator 256 GMA 6872-HVAC 1968-1972 GM A-Body HVAC Firewall Insulator 205 OLDS 3300-CSP 1933 Oldsmobile Cowl Panel Set 78 GMA 7377-HVAC 1973-1977 GM A-Body HVAC Firewall Insulator 205 OLDS 3536-C1 1935-36 Oldsmobile Firewall Insulator-Flat 216 GMG 7888-HVAC 1978-1988 GM G-Body HVAC Firewall Insulator 230 OLDS 3536-C2 1935-36 Oldsmobile Firewall Insulator-Molded 298 OLDS 3536-CSP 1935-36 Oldsmobile Cowl Panel Set 68 GM A-Body Interior Panels OLDS 3700-70-C 1937 Oldsmobile Series 70 Firewall Insulator 298 GMA 6467-CPT 1964-67 GM A-Body Coupe Package Tray Panel 109 OLDS 3800-60-C 1938 Oldsmobile Series 60 Firewall Insulator 288 GMA 6467-CSD 1964-67 GM A-Body Coupe Seat Divider Panel 109 OLDS 3800F6-C 1938 Oldsmobile F and L Firewall Insulator 298 GMA 6872-CPT 1968-72 GM A-Body Coupe Package Tray Panel 109 OLDS 3800F6-CSP 1938 Oldsmobile F-6 Cowl Panel Set 68 OLDS 3900-60-C 1939 Oldsmobile Series 60 Firewall Insulator 298 GM B-Body Interior Panels OLDS 3900-70-C 1939 Oldsmobile Series 70 Firewall Insulator 298 GMB 6364-C 1963-64 GM B-Body Coupe/Sedan Firewall Insulator 139 OLDS 4000-60-C 1940 Oldsmobile Series 60 Firewall Insulator 298 GMB 6364-CV 1963-64 GM B-Body ConvertibleFirewall Insulator 139 OLDS 4000-70-C 1940 Oldsmobile Series 70 Firewall Insulator 298 OLDS 4000-90-C 1940 Oldsmobile Series 90 Firewall Insulator 298 OLDS 4148-66-C 1941-1948 Oldsmobile Model 66 Firewall Insulator 256 OLDS 4248-70-C 1942-1948 Oldsmobile Series 70 Firewall Insulator 298 OLDS 4248-98-C 1942-1948 Oldsmobile Series 98 Firewall Insulator 298 OLDS 4248-98-CSP 1942-1948 Oldsmobile Series 98 Cowl Panel Set 68 OLDS 4900-98-C 1949 Oldsmobile Series 98 Firewall Insulator 298 OLDS 4951-7688R-C 1949-Early 1951 Oldsmobile Series 76-88-88A 308 OLDS 5000-98-C 1950 Oldsmobile Series 98 Firewall Insulator 298 OLDS 5000-HOL-C 1949 Oldsmobile Holiday Firewall Insulator 298 OLDS 5100-88S-C Late 1951 Oldsmobile Super 88 Firewall Insulator 298 GM Y-Body Cars 1961-1963 OLDS 5200-8898-C 1952 Oldsmobile Super 88-98 Firewall Insulator 298 See our GM-Y Catalog for additional products OLDS 5300-8898-C 1953 Oldsmobile Series 88 Firewall Insulator 298 GMY 6163O-C 1961-1963 GM Y-Body Oldsmobile Firewall Insulator 236 OLDS 5300-98-C 1953 Oldsmobile 98 Fiesta Firewall Insulator 298 OLDS 5400-8898-C 1954 Oldsmobile 88/98 Firewall Insulator 298 OLDS 5557-8898-CPT 1954-1957 Oldsmobile 88-98 Coupe Package Tray 109 OLDS 5557-8898-SD 1954-1957 Oldsmobile 88-98 Seat Divider 127 OLDS 5556-8898-C 1955-1956 Oldsmobile 88-98 Firewall Insulator 308 OLDS 5557-8898-CSP 1955-1957 Oldsmobile 88-98 Cowl Panel Set 68 OLDS 5700-8898-C 1957 Oldsmobile 88-98 Firewall Insulator Panel w/ 256 Direct Sheetmetal Big Block Firewall Insulator Speaker Panel for 1949-54 Oldsmobile Cars OLDS 5800-8898-C 1958 Oldsmobile 88-98 Firewall Insulator Panel w/ 256 Speaker Panel OLDS 5900-8898-C 1959 Oldsmobile 88-98 Firewall Insulator 298 OLDS 5900-8898-CSP 1959 Oldsmobile 88-98 Cowl Panel Set 68 OLDS 5900-8898-CPT 1959 Oldsmobile 88-98 Package Tray 109 OLDS 6000-8898-C 1960 Oldsmobile 88/98 Firewall Insul w/Speaker Panel 298 OLDS 6162-8898-C 1961-1962 Oldsmobile 88-98 Firewall Insulator 273 OLDS 6162-AC 1961-62 Oldsmobile Accelerator Cover 59 OLDS 6364S-C 1963-1964 Oldsmobile Starfire Firewall Insulator 198 DS 4954BBO-C4 1949-1954 Direct Shetmetal Oldsmobile Big 259 Block Firewall Insulator Panel w/4” setback Oldsmobile Firewall Insulators 1930-88 Compare these photos to your Firewall to verify fitment with your car. Firewalls are available with holes for Restoration or without holes for Custom Applications.

OLDS 3000-C1 OLDS 3000-C2 1930 Oldsmobile F-30 Type 1 Firewall 1930 Oldsmobile F-30 Type 2 Firewall

OLDS 3100-C OLDS 3200F-C 1931 Oldsmobile F-31 Firewall Insulator 1932 Oldsmobile F-32 Firewall Insulator

OLDS 3200L-C OLDS 3300-CSP 1932 Oldsmobile L-32 Firewall Insulator 1933 Oldsmobile Cowl Panel Set

Firewall Insulators can be ordered with out holes for customs and street rods. Oldsmobile Firewall Insulators 1930-78 Compare these photos to your Firewall to verify fitment with your car. Firewalls are available with holes for Restoration or without holes for Custom Applications.

OLDS 3300-C OLDS 3536-C1 1933 Oldsmobile Firewall Insulator 1935-36 Oldsmobile Firewall Insulator

OLDS 3536-C2 OLDS 3536-CSP 1935-36 Oldsmobile Firewall Insulator 1935-36 Oldsmobile Cowl Panel Set

OLDS 3700-70-C OLDS 3800-60-C 1937 Oldsmobile Series 70 Firewall Insulator 1938 Oldsmobile Series 60 Firewall Insulator

OLDS 3800F6-C OLDS 3800F6-CSP 1938 Oldsmobile F and L Firewall Insulator 1938 Oldsmobile F and L Cowl Panel Set

OLDS 3900-60-C OLDS 3900-70-C 1939 Oldsmobile Series 60 Firewall Insulator 1939 Oldsmobile Series 70 Firewall Insulator

OLDS 4000-60-C OLDS 4000-70-C 1940 Oldsmobile Series 60 Firewall Insulator 1940 Oldsmobile Series 70 Firewall Insulator

OLDS 4000-90-C OLDS 4148-66-C 1940 Oldsmobile Series 70 Firewall Insulator 1941-1948 Oldsmobile Model 66 Firewall

OLDS 4248-70-C 1942-1948 Oldsmobile Series 70 Firewall OLDS 4248-98-C 1942-1948 Oldsmobile Series 98 Firewall

OLDS 4248-98-CSP OLDS 4900-98-C 1942-1948 Olds Series 98 Cowl Panel Set 1949 Oldsmobile Series 98 Firewall Insulator

OLDS 4951-7688R-C 1949-Early 1951 Olds Series 76-88-88A Firewall DS 4954BBO-C4 1949-1954 Direct Sheetmetal Big Block Oldsmobile Firewall Insulators w/4” Setback

OLDS 5000-HOL-C OLDS 5100-88S-C 1949 Oldsmobile Holiday Firewall Insulator 1951 Oldsmobile Super 88 Firewall (Late)

OLDS 5200-8898-C 1952 Oldsmobile Super 88-98 Firewall OLDS 5300-8898-C 1953 Oldsmobile Fiesta 88 Firewall Insulator

OLDS 5300-98-C 1953 Oldsmobile 98 Fiesta Firewall Insulator OLDS 5556-8898-C 1955-1956 Oldsmobile 88-98 Firewall Insulatorw/ Speaker Panel

OLDS 5400-8898-C 1954 Oldsmobile 88/98 Firewall Insulator OLDS 5557-8898-CPT 1955-1957 Oldsmobile 88-98 Coupe Package Tray

OLDS 5557-8898-CSP 1955-1957 Oldsmobile 88-98 Cowl Panel Set

OLDS 5557-8898-SD OLDS 5700-8898-C 1955-1957 Oldsmobile 88-98 Seat Divider 1957 Oldsmobile 88-98 Firewall Insulator w/ Speaker Panel Firewall Insulators can be ordered with out holes for customs and street rods. Oldsmobile Firewall Insulators 1930-78 Compare these photos to your Firewall to verify fitment with your car. Firewalls are available with holes for Restoration or without holes for Custom Applications.

OLDS 5800-8898-C OLDS 5900-8898-C 1958 Oldsmobile 88-98 Firewall Insulator 1959 Oldsmobile 88-98 Firewall Insulator

OLDS 5900-8898-CSP OLDS 5900-8898-CPT 1959 Oldsmobile 88-98 Cowl Panel Set 1959 Oldsmobile 88-98 Cooupe Package Tray

OLDS 6000-8898-C OLDS 6162-8898-C 1960 Oldsmobile 88/98 Firewall Insulator 1961-1962 Oldsmobile 88-98 Firewall Insulator

OLDS 6162-8898-AC OLDS 6364S-C 1961-1962 Oldsmobile 88-98 Accelerator Cover 1963-1964 Olds Starfire Firewall Insulator

GMB 6364-C GMB 6364-CV 1963-1964 GM B-BodyCoupe/Sedan Firewall 1963-1964 GM B-Body Convertible Firewall Insulator Insulator

Olds Cutlass/F-85 (Y-Body) 1961-63 Firewall Insulators

Compare these photos to your Firewall to verify fitment with your car. Firewalls are available with holes for Restoration or without holes for Custom Applications.

GMY 6163O-C 1961-63 Olds Cutlass/F-85 Y-Body Firewall

Firewall Insulators can be ordered with out holes for customs and street rods. Oldsmobile A and G-Body Firewall Insulators LeMans/GTO 1964-88 Compare these photos to your Firewall to verify fitment with your car. Firewalls are available with holes for Restoration or without holes for Custom Applications.

GMA-6467-HC GMA-6467-HVAC 1964-67 A-Body Car Firewall w/Heater 1964-67 A-Body Car Firewall w/Factory AC

GMA-6872-HC GMA-6872-HVAC 1968-72 A-Body Car Firewall w/Heater 1968-72 A-Body Car Firewall w/Factory AC

GMA-7377-HVAC GMG-7888-HVAC 1973-77 A-Body Car Firewall w/Factory AC 1978-88 G-Body Car Firewall w/Factory AC

Firewall Insulators can be ordered with out holes for customs and street rods. Oldsmobile A and G-Body Interior Panels LeMans/GTO 1964-88

GMA-6467-CPT GMA-6872-CPT 1964-67 A-Body Coupe Package Tray Panel 1968-72 A-Body Coupe Package Tray Panel

GMA-6467-CSD 1964-67 A-Body Coupe Seat Divider Panel Automotive Thermal Acoustic Insulation

A Roof to Road Solution to Control Passenger Cabin Noise, Vibration and Heat TM AcoustiSHIELD Product Description AcoustiShield is a two-stage thermal acoustic automotive insulation product designed to control Noise, Vibration and Heat—the three major issues that affect passenger cabin comfort. Kits include pre-cut, ready-to-install Dynamat Xtreme® damper pads and HeatShield Barrier Insulation panels which are packaged separately for easy installation. Kits come with uniquely illustrated installation sheets, spray adhesive and seam tape. Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor, Doors and Body Panels, which includes the seat divider, package tray and rear wheel wells. The installation of a complete AcoustiShield kit typically will reduce passenger cabin noise by 12 to 19 decibels. To put this in perspective, a 10-decibel reduction is a 50 percent reduction in noise that the human ear can easily detect. Barrier insulation will reduce radiant heat by as much as 25 degrees. AcoustiShield is a Two-Stage Process Stage-One of the AcoustiShield process is the application of small pre-cut Dynamat Xtreme® damper pads and strips to auto Quick Link body sheet metal to greatly reduce the vibration and noise produced by these panels from entering the passenger cabin. Stage-Two of the AcoustiShield process is the application of pre-cut HeatShield Barrier Insulation panels to the auto body sheet metal to encapsulate any remaining vibration/noise and to thermally insulate the vehicle. Expanded NVH Reference Information: Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple directions--including internal and external air-borne noise, structure-borne noise as well as radiant heat. NVH factors to consider: •Engine NVH travels back from the front of the vehicle through the firewall and cowl. •Wheel well trunk and rear body panel NVH travels forward through the seat divider and package tray panels. •Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans. •Rumbling performance exhaust systems and transmission/drive line harmonics also rise through vehicle floor pans. •Direct heat from the sun penetrates the roof of the vehicle.

All of these influences “Apex” in the middle of the passenger cabin at ear level. Add the noise produced by the sound system; the air rushing through the vents from the HVAC system; and a normal conversation builds into a “shouting match” between the driver and passenger to overcome the “harmonic drone” of vehicle mechanics. AcoustiShield Photo Gallery

Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation.

Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation. Typical Floor Panel Sound Dampening and Thermal Barrier Insulation.

Typical Roof Panel Sound Dampening and Thermal Barrier Insulation.

Typical Body Panel Sound Dampening and Thermal Barrier Insulation. Made Right---Fit Right---Look Right OEM Original Products

Firewall Insulator products are pre-cut and ready to install with standard OEM accessory and mounting holes punched for restoration applications. Each unit has period correct insulation. Firewall Insulators are also available without holes for aftermarket HVAC systems and ABS Leather Grain Material Street Rod and Custom installs.

“Ultra High Definition” Vinyl Rubber Street Rod Firewall Insulator Direct Sheetmetal Absolute Sheetmetal

ABS “Chicken Track” Material Product Description— ABS “Chicken Track Grain” Early Ford Original Equipment Firewall Insulators

Production Period—FOMOCO: 1928 through 1948 Production Period--Some Early Mopar Vehicles FOMOCO cars and trucks used a ABS Firewall Cover unique “chicken track” texture on Chicken Track Grain Material their firewall insulator covers and related products from 1928 through 1948. Quiet Ride has faithfully reproduced this famous texture and offers it exclusively on its ABS molded firewall insulators and truck headliners, cowl and door panels. Each insulator product is molded with an ABS material and ready- to-install with Heat Shield Thermal Each insulator product is Barrier insulation, factory stock molded from an “out of the car” accessory holes and mounting pin original firewall for contour and locations punched. accuracy. Year-Make-Model Specific. Ford style steel mounting pins are not included but are available for separate purchase as needed.

Firewall Insulators can be ordered without holes for custom applications. Product Description— ABS “Leather Grain” Original Equipment Firewall Insulators

Production Period—GM and MOPAR: 1926 through 1976 Production Period—FOMOCO: 1949 through 1979 ABS Firewall Cover Leather Grain Material Most OEMs used a leather grained firewall cover on their cars and trucks from 1926 through 1965. Each insulator product is molded with ABS material and ready-to- install with factory stock accessory holes and mounting pin locations punched. Kits does not include mounting pins. Quiet Ride has an assortment Each insulator product is of “universal” mounting pin styles molded from an “out of the car” available as needed. original firewall for contour and accuracy. Mounting pins are not included but Year-Make-Model Specific. are available for separate purchase as needed.

Firewall Insulators can be ordered without holes for custom applications. Product Description— “Ultra High Definition Vinyl Rubber“ Original Equipment Firewall Insulators for General Motors Cars and Ford Cars and Trucks

Production Period—GM: 1964 to present Production Period—FOMOCO: 1964 to present FOMOCO and General Motors began using a rubber based firewall material in 1964 with the introduction of the Mustang, Chevelle family and Camaro Cars. Quiet Ride molds these products using a “Ultra High Definition” vinyl rubber. It comes ready to install with a Heat Shield Thermal Barrier insulation pad. Factory stock accessory holes and mounting pin locations are punched. Each insulator product is molded from an “out of the car” Kits include appropriate period original firewall for contour and mounting pins. accuracy. Year-Make-Model Specific.

Firewall Insulators can be ordered without holes for custom applications. Product Description—Street Rod Firewall Insulators Direct Sheetmetal Absolute Sheetmetal (formerly Bitchin Products)

Production Period—FOMOCO: 1928 through 1956 Production Period--GM: 1936 through 1972 Street Rod Firewall Insulators are based on the steel after-market firewalls that are manufactured by Direct Sheetmetal and Absolute Sheetmetal (formerly Bitchin Prod- ucts) to stop the heat and noise generated by large engine installed in smaller, older vehicles. Each insulator product is molded with ABS Leather grain material to fit the Each Street Rod Firewall Insulator steel engine and transmission recess product is molded from a steel “like a glove.” All street rod products mold provided by the manufacturer are year, make and model specific, to achieve contour and accuracy. and come ready to install with a Year-Make-Model Specific. double layer of Heat Shield Thermal Barrier insulation pad. There are no mounting holes or accessory cut-outs so customers can achieve that “smooth” look in the engine bay and passenger compartment. Customer must decide method of installation. Quiet Ride makes a Street Rod mounting pin kit, available separately. Thermal Insulation Types Original Equipment Firewall Insulators •General Motors Cars and Trucks •Ford Cars and Trucks •MOPAR Cars and Trucks

Black Fiberglass Insulation Heat Shield Barrier Insulation Typically used in vehicles 1949 through 1977 Typically used in vehicles 1928-48 and •ABS Firewall Insulators Vinyl Rubber Firewalls 1964-present •Street Rods •Custom Firewalls

Concours Show Quality Authentically Correct---“Fit like a Glove”---Easy to Install

All QRS Products, Materials and Craftsmanship Meet or Exceed OEM Quality Standards

No customer has ever reported losing judged points on our firewall products.