DOCSLIB.ORG

Production Engineering Project List

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Production Engineering Project List Production Engineering Project List SL. NO Projects OLM1. Crude oil extraction from plastic waste materials OLM2. Multi- purpose machine (Drilling, grinding, power hack-saw) OLM3. Automatic air filling in vehicle while it is in motion OLM4. Shell and tube heat exchanger OLM5. Electricity generation through Flywheel mounted in a cycle OLM6. Automatic black board cleaner with vacuum cleaner OLM7. 3 axis pneumatic trailer OLM8. Abrasive jet machining OLM9. Fly-ash brick making machine OLM10. Water bike OLM11. Ice plant OLM12. Spring testing machine OLM13. Dual axis grass cutting machine OLM14. Paper cup making machine OLM15. Pneumatic sheet cutting machine OLM16. Bench-stop cooling tower OLM17. Pneumatic punching machine OLM18. Spot welding machine OLM19. Motorized screw jack OLM20. Valve jess pulse jet engine OLM21. Automatic water tap system without sensor OLM22. Waste heat recovery OLM23. Steam power plant OLM24. Pedal power hacksaw OLM25. Fabrication of hydraulic JCB OLM26. 360 degree rotating crane OLM27. Fabrication of Cooling tower OLM28. Helical tube OLM29. Four stroke ignition system OLM30. Hydraulic bending machine OLM31. Catalytic converter OLM32. Compressed air engine OLM33. Pedal operated pneumatic vice OLM34. Pedal Power Washing Machine Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 OLM35. Power generation from speed breaker OLM36. Three cylinder ignition system OLM37. Foot step power generation OLM38. Automatic bar feeding mechanism for power hacksaw OLM39. Pneumatic wheel chair cum bed OLM40. Compressed air car OLM41. Pneumatic steering OLM42. All terrain vehicle OLM43. F1 racing car OLM44. Copula furnace OLM45. Fabrication of drilling and tapping machine OLM46. Fabrication of multi –speed gear box OLM47. Fabrication of injection moulding machine OLM48. Fabrication of vertical lathe OLM49. Fabrication of mineral water power plant OLM50. Fabrication of water powered water lifting machine OLM51. Fabrication of thermal power plant using solar energy OLM52. Fabrication of electricity generation from using steam energy OLM53. Fabrication of water heater using home refrigeration OLM54. Fabrication of four bar mechanism OLM55. Design and fabrication of four wheel steering system OLM56. Design and fabrication of 360 degree turning vehicle OLM57. Fabrication of multi fuel engine OLM58. Fabrication of harvesting machine OLM59. Design and Fabrication of Automatic dish washer OLM60. Quad-bike OLM61. Humanoid robot OLM62. 3-D printer Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 Renewable Energy Renewable Energy is not only the need of the hour, but also the talk of the town and Engineering students are opting for the green when it comes to their B.E./B.Tech project. So, we thought of compiling a list of project ideas based on Renewable energy. SL. NO Projects OLRE001 Solar powered vapor compression refrigeration system OLRE002 Solar powered grass cutter OLRE003 Wind based reciprocating pump OLRE004 Fabrication of wind mill OLRE005 solar powered Low smoke gassiffier OLRE006 Solar car OLRE007 Electric car OLRE008 E- Bike OLRE009 Smart Solar Powered Car with various automatic facilities OLRE010 Smart Solar Tracking System for Optimal Power Generation OLRE011 Solar Inverter OLRE012 Solar Power Plant OLRE013 Solar street lighting system OLRE014 Solar water heater OLRE015 Solar water purifier OLRE016 Solar powered garden lighting system OLRE017 Solar powered wheel chair for disabled person Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 Latest Projects SL. NO Projects OLMT001 Fabrication of Conveyor System OLMT002 Fabrication of Smart Wheel chair / Wheelchair cum Bed System OLMT003 Design and fabrication of Smart Car/Vehicle OLMT004 MEMS based Robotic Trolley for material handling OLMT005 Fabrication of 3 axis Robotic hand OLMT006 Fabrication of Smart stretcher OLMT007 Fabrication and design of Solar Vehicle OLMT008 Fabrication of Lift Bridge mechanism OLMT009 Fabrication of bucket conveyor system OLMT010 Fabrication of headlight tilting mechanism in vehicles OLMT011 Fabrication of 360 degree rotation mechanism of crane OLMT012 Fabrication of Energy saving conveyor system OLMT013 Fabrication of solar Grass cutter OLMT014 Fabrication of stair climbing robot OLMT015 Wireless Robotic Arm OLMT016 Humanoid Robot Fabrication OLMT018 Fabrication of automatic wiper system for vehicles OLMT019 Design and fabrication of Rope Elevator OLMT020 Conveyor Sorting Machine OLMT021 Industrial Packing System using Conveyor OLMT022 Industrial Roller Conveyor System OLMT023 Solar powered Sand Separator OLMT024 Automatic Blackboard Cleaner OLMT025 Electric Attachable Wheelchair Automator OLMT026 Fabrication of solar panel cleaning machine OLMT027 Pole Climbing Machine Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 OLMT028 Gantry Overhead Crane OLMT029 Footstep Power Generation OLMT030 Fork Lift/ Loading-Unloading Counter OLMT031 Multi-purpose Agriculture Machine OLMT032 Drain Pipe cleaning Robot/Manhole Cleaner OLMT033 Floor Cleaning Machine OLMT034 Barrel Lifter OLMT035 Gearless Transmission OLMT036 Solar Powered Manual/Automatic Air Cooler OLMT037 Wheel based dirt cleaner without electric power OLMT038 Fabrication of Stair Climbing Trolley OLMT039 Fabrication of Rice Harvesting Machine OLMT040 Skate Board OLMT041 Automatic Bike Stand Retrival System OLMT042 Vertical Wind Mill System OLMT043 Solar Powered Segway OLMT044 Smart Trolley – Follow me concept OLMT045 Automatic Plant Watering Robot OLMT046 Fabrication of Bottle Filling Plant OLMT047 3 axis Trailer/Dumper OLMT048 Regenerative Braking System OLM049 Smart Multi level Parking Set-up OLM050 Power Generation from Speed Breaker OLM051 Solar Powered Drain Cleaning Machine OLM052 Hand Operated Hydraulic Floor Crane OLM053 Hexapod Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 Snaps from previous year project: Automatic Conveyor System (Solar Powered) Solar Powered Hybrid Car Solar Powered Automatic Cooler Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 Humanoid Robot Aero-modelling Wall Climbing Hexapod Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 Solar vehicle (5 seater) We @ OLTRON have delivered 15 solar vehicle last year in colleges (GITA, GEC, ARYAN, HIT, EINSTEIN and more) as final year project. Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 Solar Power Plant We @ OLTRON have installed more than 50KW solar power plant in different colleges in order to promote renewal energy. A snap of 10 KW Solar Power Plant in GEC installed by OLTRON Plastic Extrusion Setup Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 Water Bike (Water as fuel) e-Cycle Many more to show.......Please visit us once.......Thank you Corporate Office:-N1/52- Opposite to Hanuman Temple near CRPF Gate, CRPF Square, BBSR. Visit us: www.oltrongroup.com/Mail us: [email protected]/ Contact us-7205005344/45 .
Load more

Recommended publications
  • Proceedings of 1St Agria Conference on Innovative Pneumatic Vehicles – ACIPV 2017
    Proceedings of 1st Agria Conference on Innovative Pneumatic Vehicles – ACIPV 2017 May 05, 2017 Eger, Hungary Pneumobil Proceedings of the 1st Agria Conference on Innovative Pneumatic Vehicles – ACIPV 2017 May 05, 2017 Eger, Hungary Edited by Prof.Dr. László Pokorádi Published by Óbuda University, Institute of Mechatronics and Vehicle Engineering ISBN 978-963-449-022-7 Technical Sponsor: Aventics Hungary Kft. Organizer: Óbuda University, Institute of Mechatronics and Vehicle Engineering Honorary Chairs: L. Palkovics, BUTE, Budapest M. Réger, Óbuda University, Budapest Honorary Committee: I. Gödri, Aventics Hungary Kft., Eger Z. Rajnai, Óbuda University, Budapest General Chair: L. Pokorádi, Óbuda University, Budapest Scientific Program Committee Chair: J.Z. Szabó, Óbuda University, Budapest Scientific Program Committee: J. Bihari University of Miskolc Zs. Farkas Budapest University of Technology and Economics L. Fechete, Technical University of Cluj-Napoca W. Fiebig, Wroclaw University of Science and Technology D. Fodor, University of Pannonia Z. Forgó, Sapientia Hungarian University of Transylvania L. Jánosi Szent István University Gy. Juhász, University of Debrecen L. Kelemen, University of Miskolc M. Madissoo, Estonian University of Life Sciences Vilnis. Pirs, Latvian University of Agriculture K. Psiuk, Silesian University of Technology M. Simon, Universitatea Petru Maior T. Szabó Budapest University of Technology and Economics T.I. Tóth University of Szeged Organizing Committee Chair: E. Tamás, Aventics Hungary Kft., Eger Organizing Committee: A. Kriston, Aventics Hungary Kft., Eger F. Bolyki, Aventics Hungary Kft., Eger CONTENTS Gödri I.: Welcome to the Next Generation Pneumatics 1. Tóth, I.T.: Compressed Air, as an Alternative Fuel 17. Kelemen L.: Studying through the Pneumobile Competition 23. Szabó I.P.: Evolution of the Pneumobiles from Szeged 27.
    [Show full text]
  • Technical Review on Study of Compressed Air Vehicle (Cav)
    International Journal of Automobile Engineering Research & Development (IJAuERD) ISSN 2277-4785 Vol. 3, Issue 1, Mar 2013, 81-90 © TJPRC Pvt. Ltd. TECHNICAL REVIEW ON STUDY OF COMPRESSED AIR VEHICLE (CAV) HEMANT KUMAR NAYAK, DEVANSHU GOSWAMI & VINAY HABLANI Department of Mechanical Engineering, Institute of Technology and Management, Sitholi, Gwalior, MP, India ABSTRACT Diesel and Petrol engine are frequently used by automobiles industries. Their impact on environment is disastrous and can’t be neglected now. In view of above, the need of some alternative fuel has been arises which lead to the development of CAVs (Compressed Air Vehicle). It is an innovative concept of using a pressurized atmospheric air up to a desired pressure to run the engine of vehicles. Manufacturing of such vehicles would be environment friendly as well as put the favorable conditions for the cost. Applications of such compressed air driven engine are in small motor cars, bikes and can be used in the vehicles to be driven for shorter distances. This technology states that, if at 20 degree C, 300 liters tank filled with air at 300 bar carries 51MJ of energy, experimentally proved. Under ideal reversible isothermal conditions, this energy could be entirely converted to mechanical work which helps the piston and finally crankshaft to rotate at desired RPM (revolutions per minute).The result shows the comparison of different properties related to CAV and FE (Fuel Engines). For example emission of toxic gases, running cost, engine efficiency, maintenance, weight aspects etc. KEYWORDS: Compressed Air Vehicle, Fuel Engine, Compressed Air Technology INTRODUCTION Compressed air has been used since the 19th century to power mine locomotives and trams in cities such as Paris and was previously the basis of naval torpedo propulsion.
    [Show full text]
  • Life Cycle Assessment of Conventional and Alternative Fuels for Vehicles
    Life Cycle Assessment of Conventional and Alternative Fuels for Vehicles By HUSEYIN KARASU A Thesis Submitted in Partial Fulfilment of the Requirements for the degree of Master of Applied Science in Mechanical Engineering Faculty of Engineering and Applied Science University of Ontario Institute of Technology Oshawa, Ontario, Canada August 2018 © Huseyin Karasu, 2018 Abstract For the near future, it is important that vehicles are run by alternative fuels. Before we can go ahead with the new alternatives, it is crucial that a comprehensive life cycle analysis is carried out for fuels. In this thesis study, a cradle-to-grave life cycle assessment of conventional and alternative fuels for vehicle technologies is performed, and the results are presented comparatively. The aim of the study is to investigate the environmental impact of different fuels for vehicles. A large variety of fueling options, such as diesel, electric, ethanol, gasoline, hybrid, hydrogen, methane, methanol and natural gas are considered for life cycle assessment of vehicles. The study results are shown in abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion and human toxicity potential using three different impact assessment methods. The analyses show that hydrogen vehicle is found to have the lowest environmental impacts with ozone layer depletion of 8.14×10-10 kg CFC-11-eq/km and the human toxicity potential of 0.0017 kg (1,4 DB)-eq/km respectively. On the other hand, the gasoline-powered vehicle shows a poor performance in all categories with the global warming potential of 0.20 kg CO2- eq/km. Keywords: Life cycle assessment; Vehicles; Fuels; Hydrogen; Electric vehicles; natural gas; Ethanol; Methanol.
    [Show full text]
  • Economic and Environmental Evaluation of Compressed-Air Cars
    IOP PUBLISHING ENVIRONMENTAL RESEARCH LETTERS Environ. Res. Lett. 4 (2009) 044011 (9pp) doi:10.1088/1748-9326/4/4/044011 Economic and environmental evaluation of compressed-air cars Felix Creutzig1,2, Andrew Papson3, Lee Schipper4,5 and Daniel M Kammen1,2,6 1 Berkeley Institute of the Environment, University of California, Berkeley, USA 2 Renewable and Appropriate Energy Laboratory, University of California, Berkeley, USA 3 ICF International, 620 Folsom Ave, Suite 200, San Francisco, CA 94107, USA 4 Precourt Energy Efficiency Center, Stanford University, USA 5 Global Metropolitan Studies, University of California, Berkeley, USA 6 Energy and Resources Group, University of California, Berkeley, USA E-mail: [email protected] Received 29 June 2009 Accepted for publication 3 November 2009 Published 17 November 2009 Online at stacks.iop.org/ERL/4/044011 Abstract Climate change and energy security require a reduction in travel demand, a modal shift, and technological innovation in the transport sector. Through a series of press releases and demonstrations, a car using energy stored in compressed air produced by a compressor has been suggested as an environmentally friendly vehicle of the future. We analyze the thermodynamic efficiency of a compressed-air car powered by a pneumatic engine and consider the merits of compressed air versus chemical storage of potential energy. Even under highly optimistic assumptions the compressed-air car is significantly less efficient than a battery electric vehicle and produces more greenhouse gas emissions than a conventional gas-powered car with a coal intensive power mix. However, a pneumatic–combustion hybrid is technologically feasible, inexpensive and could eventually compete with hybrid electric vehicles.
    [Show full text]
  • Consultation on Reducing Co2 Emissions from Road Transport
    CONSULTATION ON REDUCING CO2 EMISSIONS FROM ROAD TRANSPORT INDIVIDUALS' COMMENTS IN RESPONSE TO QUESTIONS C.2, C.4, E.2, E.7, E.9 and F The tables below display the comments provided by individuals in response to the questions referred to above in the online questionnaire. As answering these questions was optional, not all respondents provided an answer or comments for each of the questions. The individual response number can be used to cross reference these comments from individuals with the response which they provided to the tick box questions in the questionnaire. COMMENTS FROM INDIVIDUALS IN RESPONSE TO QUESTION C2 Individual C2 Response Number 1 objectif 2020 est trop éloigné car les constructeurs ont la possibilité de le faire plus tôt car la conception des nouveaux modèles est déjà en "route", ils ont d excellents ingénieurs tout à fait capables de les réaliser. 2 A part l'obligation du filtre sur les pots d'échappement, je ne connais pas les autres réglementations qui pourraient exister pour limiter les émissions de façon contraignante pour les industriels automobiles. 5 La consommation est également lié au poids du véhicule. Or trop de nouveaux modèles sont trop lourds, des matériaux plus légers ayant des caractéristiques mécaniques équivalentes mais une masse volumique plus faible sont sous employés. La communication des constructeurs portent essentiellement sur les modèles haut de gamme, donc lourds et émetteurs de gaz à effet de serre. 10 Les résultats ne sont pas assez rapides 12 Current legislation is to weak, it needs to be more efficient and take the positive climatic effects of biofuels and electricity in to account 16 Die Verordnung sollte sparsame Autos und alternative Antriebe unterstützen, wobei natürlich aber nicht nur rein auf die CO2 Werte im Verbrauch geachtet werden sollte, sondern auch jene von Produktion, Wartung und allgemeinen Verschleiß (auch von Straßen etc) und sollte daher auch mit dem Fahrzeuggewicht zu tun haben! Je leichter, desto besser.
    [Show full text]
  • How the Air Car Works
    How the Air Car Works BY CHRISTOPHER LAMPTON (HSW-CONTACT.HTM) AUTO (HTTP://AUTO.HOWSTUFFWORKS.COM/) | FUEL- EFFICIENT VEHICLES (HTTP://AUTO.HOWSTUFFWORKS.COM/FUEL-EFFICIENCY/VEHICLES) Browse the article How the Air Car Works (http://auto.howstuffworks.com/fuel-efficiency/vehicles/air- car.htm) (http://auto.howstuffworks.com/fuel-efficiency/alternative- fuels/afv-pictures.htm) (http://auto.howstuffworks.com/fuel-efficiency/alternative- fuels/afv-pictures.htm) Could air cars make gas prices like these a memory? ௙See pictures of alternative fuel vehicles (http://auto.howstuffworks.com/fuel- efficiency/alternative-fuels/afv-pictures.htm). TETRA IMAGES/GETTY IMAGES (HTTP://WWW.GETTYIMAGES.COM) Gasoline is already the fuel of the past. It might not seem that way as you fill up on your way to work, but the petroleum used to make it is gradually running out. It also pollutes air that's becoming increasingly unhealthy to breathe, and people no longer want to pay the high prices that oil companies are charging for it. Automobile manufacturers know all of this and have spent lots of time and money to find and develop the fuel of the future. The search is on, but what will this fuel of the future be? Ready-made fuels like petroleum are becoming more difficult to find and automobile manufacturers are turning to greener energy sources like batteries. These batteries can be charged with energy and placed in a car where that energy can be released. As good as that idea might seem, some manufacturers think air could become an even better energy source. Air? At first glance, the idea of running a car on air seems almost too good to be true.
    [Show full text]
  • Designing and Fabrication of Pollution Free Car
    Journal of Quality and Technology Management Volume X, Issue II, December 2014, Page 97 – 123 DESIGNING AND FABRICATION OF POLLUTION FREE CAR S.A. Ahmad1, N. Ahmad1, S.J. Mansoor2, S.F. Shah3, S.M. A .Naqvi1 1Mechanical Engineering Department, NFC IEFR, Faisalabad 2S.E. MEPCO Sahiwal 3Mechanical Engineering Department, UET, Lahore ABSTRACT It was very difficult to think that a can be derived by using compressed air. Now a days however it is being popular and has been used to take interest of researchers having nil emissions and is feasible for city driving situations. The air car currently being designed, developed, manufactured and then powered by an air engine, specifically it was for the savings of fossil fuel and air pollution. Although it seemed to be an environmental-friendly solution, it must be considered that it is good for wheel drive in specific range. As the world is hard pressed with the vitality and fuel emergencies, intensified by contamination of numerous types, any innovation that brought out the answer for this problem was a blessing. In one of such new advances, was the improvement of another engine called as "compressed Air Engine", which did not oblige any of the known powers like petrol, diesel, CNG, LPG, hydrogen and so forth this worked utilizing just compacted air and it supplanted different sorts of known energizes furthermore permanently solved the issue of contamination, since its fumes was clean and fresh air. Experimental investigation were completed on this changed motor to discover its execution qualities like brake force, mechanical effectiveness, general productivity, aerial proportion and expense examination and so on.
    [Show full text]
  • Air Powered Car Abstract
    A PROJECT REPORT ON AIR POWERED CAR ABSTRACT @ Gasoline, which has been the main source of fuel for the history of cars, is becoming more and more expensive and impractical (especially from an environmental standpoint). @ These factors are leading car manufacturers to develop cars fueled by alternative energies. INTRODUCTION @ Due to increasing amount of pollution, crisis of fuel and increasing cost of fuel we need to think about alternative for fuel. Some alternatives for fuel are solar energy, hydrogen, bio-gas and compressed natural gas. @ Air powered cars are zero pollution cars which will use compressed air or nitrogen gas instead of gasoline fuels. It will not only reduce the cost of fuel but will also environment friendly and it is a renewable source unlike gasoline. There are two types of air powered cars i.e. (1) Working by compressed air (2) Working by nitrogen gas COMPRESSED AIR CAR INVENTION OF SYSTEM: Guy Niger, thought that he could develop an engine and sell it to the large automotive manufactures. WORKING OF SYSTEM: Basic components of Air Powered car are as shown in fig. Two stroke engine The air engine is an emission-free piston engine using compressed air.Two stroke engine Sis used in compressed air car. SYSTEMS: Distribution and valves: @ This system runs on very little energy and alters neither the valve phase nor its rise. Gear box: @ Gear changes are automatic, powered by an electronic system developed by MDI. A computer which controls the speed of the car is effectively continuously changing gears . @ The latest of many previous versions, this gearbox achieves the objective of seamless changes and minimum energy consumption.
    [Show full text]
  • Pneumatic Vehicle Using Compressed Air: a Real Solution to Pollution and Fuel Crisis
    ISSN 2393-8471 International Journal of Recent Research in Civil and Mechanical Engineering (IJRRCME) Vol. 2, Issue 1, pp: (110-116), Month: April 2015 – September 2015, Available at: www.paperpublications.org Pneumatic Vehicle Using Compressed Air: A Real Solution To Pollution And Fuel Crisis 1N.A.Todkar, 2R.H.Dhonde, 3N.S.Gawade, 4S.B.Shinde, 5S.S.Kale 1,2,3,4,5 Department of Mechnical Engineering, Jspm Narhe Technical Campus Narhe,Pune-41 Abstract: Now days the world faces fuel crisis and pollution problem. Also the conventional fuels are about to end in some years. This necessitates the search for alternative fuels. Compressed air is one of the best alternative fuels which are easily available in atmosphere in abundant form. The main objective of this project is to reduce dependency of vehicle on conventional fuel. The air car is a car currently being developed which is still in the R&D stage all over the world. Compressed air is stored in storage tank with some modifications from the compressor. The pneumatic motor (vane type motor) is used to convert pressure energy into mechanical energy. The rotation of air motor is controlled by controlling the air flow with the help of air gun (flow control valve). The gear box is provided at the end of motor shaft for increasing torque capacity of vehicle. Unlike conventional transmission system includes clutch, counter shaft, flywheel, propeller shaft, differential, our pneumatic motor is coupled to the rear wheel with intermediate gear box which greatly reduces the transmission losses and weight of vehicle. The running and maintenance cost for air car is less than conventional cars.
    [Show full text]
  • Latest Developments of a Compressed Air Vehicle: a Status Report by S
    Global Journal of Researches in Engineering Automotive Engineering Volume 13 Issue 1 Version 1.0 Year 2013 Type: Double Blind Peer Reviewed International Research Journal Publisher: Global Journals Inc. (USA) Online ISSN: 2249-4596 & Print ISSN: 0975-5861 Latest Developments of a Compressed Air Vehicle: A Status Report By S. S. Verma S.L.I.E.T., Longowal Abstract - Compressed air as a source of energy in different uses in general and as a non- polluting fuel in compressed air vehicles has attracted scientists and engineers for centuries. Efforts are being made by many developers and manufacturers to master the compressed air vehicle technology in all respects for its earliest use by the mankind. The present paper gives a brief introduction to the latest developments of a compressed-air vehicle along with an introduction to various problems associated with the technology and their solution. While developing of compressed air vehicle, control of compressed air parameters like temperature, energy density, requirement of input power, energy release and emission control have to be mastered for the development of a safe, light and cost effective compressed air vehicle in near future. Keywords : compressed air vehicle, technological trends, energy input, energy released, emission control, storage & fueling, temperature. GJRE-B Classification : FOR Code: 090299 Latest Developments of a Compressed Air Vehicle A Status Report Strictly as per the compliance and regulations of : © 2013. S. S. Verma. This is a research/review paper, distributed under the terms of the Creative Commons Attribution- Noncommercial 3.0 Unported License http://creativecommons .org/licenses/by-nc/3.0/), permitting all non commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
    [Show full text]
  • Dynamic Analysis of Compressed Air Energy Storage in the Car
    Open Access Journal Journal of Power Technologies 91 (1) (2011) 23–36 journal homepage:papers.itc.pw.edu.pl Dynamic analysis of compressed air energy storage in the car Łukasz Szabłowskia,∗, Jarosław Milewskia aInstitute of Heat Engineering, Warsaw University of Technology 21/25 Nowowiejska Street, 00-665 Warsaw, Poland Abstract The article presents a dynamic analysis of the compressed air energy storage in the car. The analysis was used to determine those processes most relevant to achieving highest possible efficiency. A review of the state of the art is presented. Simple technical-economic analysis of usage those kind of cars is also performed and discussed by taking Polish local conditions from an electricity market. Main advantages as well as drawback of the compressed air cars are pointed out Keywords: Dynamic, Compressed Air Energy Storage, Vehicles 1. Introduction pean Union regulations are driving energy efficiency initiatives such as the gradual elimination of incan- In an era of intensive environmentally friendly ac- descent light bulbs in favor of low energy lighting tions in the face of a global economic crisis, in- alternatives. They also set down the rules for mark- creasing emphasis is placed on energy efficiency is- ing electrical equipment in terms of their energy effi- sues. Although mining technologies are opening up ciency class. the prospect of exploiting previously unusable fos- sil fuels, there is no doubt that the overall reserves Road vehicles present an ideal area for reducing of natural resources continue to shrink. From the energy consumption due to their abundance and the viewpoint of the Polish economy, dependent as it is interest governments of all persuasions show in new on gas and oil from abroad, a temporary solution ventures in this field, the latest of which being to ban might be found in the shape of either underground all petrol and diesel cars from cities by 2050.
    [Show full text]
  • Air Powered Vehicles S.S
    54 The Open Fuels & Energy Science Journal, 2008, 1, 54-56 Open Access Air Powered Vehicles S.S. Verma* Department of Physics, S.L.I.E.T. (Deemed to be University), Longowal, Distt.-Sangrur, Punjab, 148 106, India Abstract: Light utility vehicles are becoming very popular means of independent transportation for short distances. Cost and pollution with petrol and diesel are leading vehicle manufacturers to develop vehicles fueled by alternative energies. Engineers are directing their efforts to make use of air as an energy source to run the light utility vehicles. The use of compressed air for storing energy is a method that is not only efficient and clean, but also economical. The major problem with compressed air cars was the lack of torque produced by the "engines" and the cost of compressing the air. Recently several companies have started to develop compressed air vehicles with many advantages and still many serious bottlenecks to tackle. This paper briefly summarize the principle of technology, latest developments, advantages and problems in using compressed air as a source of energy to run vehicles. Keywords: Environmntal pollution, alternative energies, compressed air, air powered vehicles. 1. INTRODUCTION although none has been released to the public so far. Com- pressed air tanks store power really well but are lacking on We are living in a very mobile society so light utility vehi- power density. They tie or beat batteries in the charge / re- cles (LUV) like bikes and cars are becoming very popular charge efficiency and totally kill them on lifespan. Higher means of independent transportation for short distances.
    [Show full text]