Connection Panel (depending on the model)
COLOR TELEVISION ➢ The product colour and shape may vary depending on the Connecting to the HDMI Input model. The HDMI5 connector is used for equipment with HDMI output, such as a Set-Top Box, DVD player, AV receiver or Rear Panel digital TV. ➢ No additional Audio connection is needed for an HDMI to HDMI connection. Owner’s Instructions
Before operating, please read this manual thoroughly, Side Panel and retain it for future reference.
Register your product at www.samsung.com/global/register. Record your Model and Serial number here for future reference. 1 ▪ Model ______▪ Serial No. ______S-Video input or
2 cable television Video input Control Panel (depending on the model) network
➢ The product colour and shape may vary depending on the 3 Audio input model. ☛ Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Front (or Side) Panel ☛ Please be sure to match the colour coded input terminals and cable jacks. Connecting to the S-VIDEO Input Connecting to an Aerial or Cable Television Network The 1 (S-VIDEO IN) and 3 (AUDIO-L/R) connectors Connect the aerial or network input cable to the 1 (75 Ω are used for equipment with an S-Video output, such as a coaxial socket). camcorder or VCR. 1 2 3 4 5 6 To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, Connecting to the RCA Input cable television network, or satellite network. The 3 (AUDIO-L/R) and 2 (VIDEO) connectors are used for 1 Remote control sensor If you are using an indoor aerial, you may need to adjust it equipment, such as a camcorder, video disc player, or video 2 Standby indicator when tuning your television until you obtain a picture that is game device. 3 Power on/off both sharp and clear. 4 On-screen menu display 5 Volume adjustment Connecting to the SCART Input/Output 6 Channel selection The SCART2 and SCART3 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, You can use the 6 buttons to switch the TV on when it is video game device, or video disc player. in standby mode depending on the model. The SCART2 is also used for equipment with an RGB The 5 and 6 buttons also have the same function as the output, such as a video game device or video disc player. ◄/►/▲/▼ buttons on the remote control. If the remote control no longer works or you have Connecting to the Component Input misplaced it, you can use the controls on the panel of the The RCA4 connectors are used for equipment such as a television. DVD with component output.
English - 1 AA68-03904A-01
AA68-03904A_Eng.indd 1 2007-03-30 ｿﾀﾀ・1:46:01
Get user manuals: See SafeManuals.com 4 % (depending on the model) CH MGR PRE-CH Remote Control Used to display channel Used to switch Switching the Television On and Off lists on the screen. repeatedly between Operation of remote control may be affected by bright The mains lead is attached to the rear of the television ➢ 5 TV the last two channels artificial light near to the TV. 2 2 Used to return to the displayed. Plug the mains lead into an appropriate socket. ➢ This is a special remote control for the visually impaired, 1 1 1 TV mode when it is in ^ SLEEP ➢ The main voltage is indicated on the rear of the and has Braille points on the POWER, Channel and external input mode. Used to select a Volume buttons. television and the frequency is 50 or 60Hz. 6 / preset time interval for Used to increase or automatic turn off. 2 Press the “ I ” button (On/Off) on the front of the television. decrease the volume. & SRS 3 Press the POWER button on the remote control to switch 7 Used to select the SRS MENU the television on. The programme that you were watching TruSurround XT mode. Used to display the last is re-selected automatically. If you have not yet stored * on-screen menu or return P / P any channels, no clear picture appears. Refer to “Channel to the previous menu. Used to display the 8 - Auto Store” on page 3 or “Channel - Manual Store” on ▲/▼/◄/► next or previous stored page 4. Used to control the channel. ➢ If the television is initially powered on, several basic cursor in the menu. ( EXIT 9 customer settings proceed automatically. INFO Used to exit from any Refer to “Setup - Plug & Play” on page 3. Used to view the channel display or return to information and setting normal viewing. 4 To switch the television off, press the “ I ” button ) status you selected. MUTE 2 (On/Off) on the front of the television. 0 S.MODE Used to switch the sound 2 Used to select the sound off temporarily. To turn 1 effect. the sound back on, press 1 ! P.MODE the MUTE, , or Used to select the button. picture effect. a ENTER @ DUAL I-II While using the Placing the Television in Standby Mode Used to select the sound on-screen menus, press 2 mode. the ENTER button to The television can be placed in standby mode, in order to 1 # TURBO activate (or change) a reduce power consumption and wear of the cathode ray Used to select the turbo particular item. tube. Standby mode can be useful when you wish to interrupt sound option. b STILL viewing temporarily (during a meal, for example). $ SOURCE Used to freeze the Used to display all of the current picture. 1 Press the POWER button on the remote control while available video sources. c P.SIZE viewing. Used to change the The television is in standby mode. screen size. 2 To switch the television back on, simply press it again. ➢ You can also switch on by pressing the TV ( ), P / P , or numeric button.
Installing Batteries ☛ Do not leave the television in standby mode for long periods of time (when you are away on holiday, for Remove the cover. Install two AAA size example). Turn the television off by pressing the “ ” batteries, then replace the cover. I button (On/Off) on the front (or side) of the television. It is When the remote control does not operate 1 POWER 3 -/-- best to unplug the set from the mains and aerial. Used to switch the TV on Used to select a channel normally, check that the “+” and “–” ends of and off. numbered ten or over. the batteries are inserted correctly or the 2 Numeric buttons Press this button, then batteries are drained. Used to select channels “--” symbol is displayed. ➢ Do not mix battery types, i.e. alkaline and manganese. directly. Enter the two-digit channel number.
English - 2
AA68-03904A_Eng.indd 2 2007-03-30 ｿﾀﾀ・1:46:08
Get user manuals: See SafeManuals.com Viewing the Menus Input (depending on the model) -
TV Source List / Edit Name 1 Press the MENU button. 3 Make sure that the antenna Auto Store The main menu is displayed on the screen. Its left side has is connected to the television Country : BelgiumBelgium France TV Search Germany Source List Source List five icons: Input, Picture, Sound, Channel, and Setup. (refer to page 1). Italy Netherlands Press the ENTER button. Spain You can switch between Sweden TV 2 Press the ▲ or ▼ button to select one of the icons. Press Switzerland viewing signal from Ext.1 : ------The Country menu is United Kingdom the ENTER button to access the icon’s sub-menu. Others connected equipment, such Ext.2 : ------displayed. Eastern Europe AV/S-Video : ------Move Enter Skip as a VCR, DVD, set-top box, Component : ------3 Press the ▲ or ▼ button to move to items in the menu. 4 Press the ▲ or ▼ button to and the TV source (broadcast HDMI : ------Press the ENTER button to enter items in the menu. select your country. Search or cable). Move Enter Return Press the ENTER button. P 1 C------87 MHz 10% 4 Press the ▲/▼/◄/► button to change the selected items. Stop ➢ You can change the required external source simply Press the button to return to the previous menu. MENU 5 To search the channels, press the ENTEREnter button.Skip by pressing the SOURCE button on the remote
To stop the search, press the TV control. It might take a short period of time for pictures 5 Press the EXIT button to exit from the menu. Clock Set ENTER button. to be switched. To return to the TV mode, press the When the channel searching Hour Minute TV button on the remote control. has finished, the Clock Set -- -- menu is displayed. Edit Name TV Edit Name ---- You can give a name to the Ext.1 : ----VCR DVD 6 Press the ◄ or ► button to external source. Ext.2 : ------Cable STB HD STB move to the hour or minute. Move Adjust Skip AV : ------Sat. STB S-Video : ------AV Receiver Set the hour or minute by Component : ------Setup - Plug & Play pressing the ▲ or ▼ button. HDMI : ------When the television is initially powered on, several basic 7 When you have finished, press the MENU button. Move Enter Return customer settings proceed automatically and subsequently. The Enjoy your viewing Plug & Play The following settings are available. is displayed, and then the Enjoy your viewing channel which has been OK 1 If the television is in standby Plug & Play stored will be activated. mode, press the POWER Start Plug & Play Channel - Auto Store button on the remote control. OK Re-setting the Plug & Play The message Start Plug & Enter Return You can scan for the frequency ranges available to you (and Play. is displayed. Method: TV TV Setup Setup availability depends on your country). Automatically allocated To start Plug & Play, press the MENU ▲/▼ (Setup) ENTER English Plug & Play ► programme numbers may not correspond to actual or desired button. Plug & Play Deutsch ENTER Français ▲/▼ (Plug & Play) ENTER Language : English ► Language : EnglishNederlands programme numbers. However you can sort numbers The Language menu is Time Español Time ► Italiano Blue Screen : OnSvenska Blue Screen : On ► manually and clear any channels you do not wish to watch. displayed. Português Melody : ΕλληνικάOn Melody : On ► ➢ The Language menu will Ceština TV Srpski Channels are sorted and stored Auto Store automatically appear after in the order which reflects their several seconds, even if Move Enter Skip Move Enter Return Country : Belgium ► position in the frequency range Search ► the ENTER button is not pressed. (with lowest first and highest last). 2 Select the appropriated language by pressing the ▲ or The programme originally selected ▼ button. Press the ENTER Plug & Play is then displayed. button. Check antenna input. ➢ To stop the search before it Move Enter Return The Check antenna input. is OK has finished, press the ENTER Search displayed. Enter Skip button. P 1 C------87 MHz 10% ➢ If any language is not When finished, the Sort menu Stop selected, the language menu will disappear about 30 is displayed. To sort the stored Enter Return seconds later. channels into the desired numerical order, refer to “Channel - Sort” on page 4. continued... To exit without sorting, press the EXIT button.
English - 3
AA68-03904A_Eng.indd 3 2007-03-30 ｿﾀﾀ・1:46:17
Get user manuals: See SafeManuals.com Channel - Manual Store Channel - Channel Manager Channel - Fine Tune
You can store channels, including TV Manual Store You can exclude the channels you have Channel Manager If the reception is clear, you do not Fine Tune P 1 C 4 those received via cable networks. chosen from the channels you scanned. 1/15 have to fine-tune the channel, as P 2 * Prog. : P 1 Prog. +2 1 C 4 ▲ When storing channels manually, Colour System : Auto ► When you scan through the stored 2 C-- this is done automatically during Reset Sound System : B/G ► 3 S 1 Move you can choose: channels, those you have chosen to skip 4 S 3 the search and store operation. Adjust Return Channel : C-- 5 S 6 – Whether or not to store each of Search : 40 MHz are not displayed. 6 S 8 If however the signal is weak or 7 S10 ▼ the channels found Store : ? All of the channels that you do not Add distorted, you may have to fine-tune the channel manually. Move Enter – The programme number of each specifically choose to skip are displayed Page Return Move Adjust Return stored channel which you wish during scanning. Method: to identify ➢ It can be displayed simply by pressing the CH MGR ◄/►: You can obtain a sharp and clear picture and good Prog.(Programme number to be assigned to a channel) (Channel Manager) button. sound quality. ▲/▼ : You can reset the setting. Colour System: Auto / PAL / SECAM / NTSC4.43 ENTER Method: MENU : You can memorise adjusted picture or sound. Sound System: B/G / D/K / I / L ▲/▼ : Used to select a channel to be added or erased. Channel (When you know the number of the channel to ENTER : Used to confirm the channel selected for adding or be stored) erasing. ➢ You can also select the channel number directly by pressing the numeric buttons (0~9). Search (When you do not know the channel numbers) Channel - LNA (depending on the model) The tuner scans the frequency range until the first channel Channel - Sort or the channel that you selected is received on the screen. TV TV This function is very useful in the Channel Store (When you store the channel and associated This operation allows you to Sort situation that the TV is used in change the programme numbers ▲ More programme number) From : P 1 ---- weak signal. LNA amplifies the Fine Tune of stored channels. To : P------LNA : OffOff Store : ? TV signal in the weak signal On ➢ If there is no sound or abnormal sound, re-select the This operation may be necessary area, but not noise. sound standard required. after using auto store.
Move Enter Return Move Adjust Return ☛ Channel mode LNA (Low Noise Amplifier) setting is to be made for each P (Programme mode): When completing tuning, From : Channel number to be changed. channel. If the picture is noisy with the LNA set to On, the broadcasting stations in your area have been To : New channel number to be identified. select Off. assigned to position numbers from P00 to P99. You can select a channel by entering the position Store : Confirmation the exchange of channel numbers. Depending on areas, factory mode of LNA will be set up number in this mode. as On or Off. C (Air channel mode): You can select a channel by entering the assigned number for each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by Channel - Name Setup - Time entering the assigned number for each cable channel Clock Set TV Time in this mode. Channel names will be assigned TV Name automatically when channel You can set the television Clock Set : -- : -- ► Prog. Сh. Name clock so that the current time Sleep Timer : Off ► information is broadcast. 13 C21 А On Timer : Off ► These names can be changed, 14 C23 ----- is displayed when pressing Off Timer : Off ► allowing you to assign new 15 C25 ----- the INFO button on the 16 C26 ----- remote control. You must also names. 17 C28 ----- ▼ set the time if you wish to use Move Enter Return Method: Move Adjust Return the automatic on or off timers. When pressing the “ I ” button (On/Off) on the front ▲/▼ : Used to select a letter or number. ➢ of the television, the clock setting will be reset. ◄/► : Used to move to the previous or next letter. ENTER : Used to confirm the new name. continued...
English - 4
AA68-03904A_Eng.indd 4 2007-03-30 ｿﾀﾀ・1:46:18
Get user manuals: See SafeManuals.com Picture - Mode
Sleep Timer Mode : Dynamic / Standard / TV Mode Film Mode You can select a time period of between 30 and 180 You can automatically sense and process film signals from Movie / Custom Mode : Dynamic ► minutes after which the television automatically switches You can select the type Contrast : 90 ► some sources and adjust the picture for optimum quality. to standby mode. of picture which best Brightness : 50 ► Sharpness : 50 ► ➢ Not available in the Component or HDMI mode. You can select these options simply by pressing the ➢ corresponds to your viewing Colour : 50 ► Mode discrepancies, such as turning off Film SLEEP button on the remote control. If the sleep timer requirements. ▼ More Mode while viewing a film source or turning on is not yet set, Off is displayed. If it is already set, the ➢ You can select these Move Enter Return Film Mode while viewing Non-film sources, may remaining time before which the television switches to options simply by affect the picture quality. standby mode is displayed. pressing the P.MODE button on the remote control. On Timer / Off Timer Contrast / Brightness / Sharpness / Colour / You can set the On/Off timers so that the television will Tint (NTSC only) switch on or off automatically at the time you select. The television has several settings which allow you to control the picture quality. ☛ You must set the clock first. Colour Tone : Cool2 / Cool1 / Normal / Warm1 / Warm2 Picture - PIP (depending on the model) Reset ☛ Auto Power Off You can display a sub picture within the main picture of TV When you set the timer “On”, the TV will eventually turn You can return to the factory defaults. programme or external A/V devices such as VCR or DVD. In off, if no controls are operated for 3 hours after the TV was The reset function is set for each mode this way you can watch TV program or monitor the video input turned on by timer. This function is only available in timer (Dynamic, Standard, Movie, or Custom). from any connected devices while watching TV or other video “On” mode and prevents overheating, which may occur if a input. TV is on for too long. TV Picture TV PIP
Mode : Dynamic ► PIP : On ► Size : 16:9 ► Source : TV ► Digital NR : On ► Swap ► Tilt : 0 Size : Large ► Film Mode : Off ► Position : ► Picture - Size / Digital NR/ Tilt / Film Mode PIP : Off ► Prog. : P 1
Move Enter Return Move Enter Return Size: TV Picture (depending on the model) Mode : Dynamic ► PIP: On/Off 1 Setup - Nomal / Zoom1 / Zoom2 Size : 16:9 ► You can activate or deactivate the PIP function. Auto Wide / 16:9 / Zoom1 / Digital NR : On ► Language / Blue Screen / Melody Tilt : 0 Zoom2 / 4:3 (Wide model) Film Mode : Off ► Source 2 You can select the picture size PIP : Off ► You can select a source of the sub-picture. TV Language Setup which best corresponds to Depending on the models, the sub-picture can be It is variable depending on Move Enter Return ➢ Plug & Play ► your viewing requirements. viewed only when a source different from the main the model. When you start Language : English ► It is variable depending on the model. picture's is selected. If a TV programme is viewed using the television for the Time ► Blue Screen : On ► ➢ You can change the picture size simply by pressing on the main picture, the sub-picture is not available first time, you must select the Melody : On ► the P.SIZE button on the remote control. for TV programmes. If a TV source is selected, the language which will be used Digital NR message Not Available is displayed. for displaying menus and Move Enter Return indications. If the signal received by the television is weak, you can Swap 3 activate this feature to reduce any static and ghosting that You can interchange the main picture and sub-picture. Blue Screen may appear on the screen. If no signal is being received or the signal is very weak, 4 Tilt (depending on the model) Size: Large / Small / Double Window a blue screen automatically replaces the noisy picture If you find that the picture received is slightly tilted to one You can select a size of the sub-picture. background. If you wish to continue viewing the poor side, you can adjust the tilt setting (-7 to +7). picture, you must set the Blue Screen to Off. Position: / / / 6 You can select a position of the sub-picture. Melody continued... You can hear melody sound when the television is continued... powered on or off. English - 5
AA68-03904A_Eng.indd 5 2007-03-30 ｿﾀﾀ・1:46:20
Get user manuals: See SafeManuals.com 5 Prog. Auto Volume If the receiving conditions deteriorate, listening will be You can select a channel of the sub-picture only when the Each broadcasting station has its own signal conditions, ➢ and so it is not easy to adjust the volume every time the easier if the mode is set to the Mono. Source is set to TV. channel is changed. This feature lets you automatically If the stereo signal is weak and an automatic Easy functions of the remote control adjust the volume of the desired channel by lowering the switching occurs, then switch to the Mono. sound output when the modulation signal is high or by When receiving a mono sound in the AV mode, You can freeze the sub-picture. raising the sound output when the modulation signal is connect to the “AUDIO-L” input connector on the low. panel (front or side). If the mono sound comes out Turbo Sound only from left speaker, press the DUAL I-II button. This feature suitably emphasizes both higher and lower bands of sound (and includes other effects). You can enjoy more magnificent and dynamic sound when watching music, movie, or other channels. Important Warranty Information ➢ You can change the options simply by pressing the TURBO button on the remote control. Regarding Television Format Viewing Pseudo Stereo This feature converts a monaural sound signal into two Standard screen format televisions (4:3, the aspect ratio of the identical left and right channels. Once the Pseudo Stereo screen width to height) are primarily designed to view standard Sound - Mode / Equalizer / is set to On or Off, these settings apply to the sound format full-motion video. The images displayed on them should SRS TruSurround XT / Auto Volume / effects such as Standard, Music, Movie, and Speech. primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, Turbo Sound / Pseudo Stereo Selecting the Sound Mode such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total Mode: Standard / Music / TV Sound (depending on the model) television viewing per week. Movie / Speech / Custom Mode : Custom ► You can select the type of Equalizer ► The DUAL I-II button displays/ Wide screen format televisions (16:9, the aspect ratio of SRS TruSurround XT : Off ► controls the processing and the screen width to height) are primarily designed to view special sound effect to be Auto Volume : Off ► used when watching a given Turbo Sound : Off ► output of the audio signal. When wide screen format full-motion video. The images displayed broadcast. Pseudo Stereo : Off ► power is switched on, the mode is on them should primarily be in the wide screen 16:9 ratio automatically preset to either “Dual-I ” or “Stereo”, depending ➢ You can select these Move Enter Return format, or expanded to fill the screen if your model offers this options simply by pressing on the current transmission. feature, and constantly moving. Displaying stationary graphics the S.MODE button on the remote control. NICAM Stereo and images on screen, such as the dark side-bars on non- expanded standard format television video and programming, Equalizer Type of broadcast On-screen indication The television has several settings which allow you to should be limited to no more than 15% of the total television control the sound quality. Regular broadcast Mono viewing per week. ➢ If you make any changes to these settings, the sound (Standard audio) (Normal use) mode is automatically switched to Custom. Regular + Mono Mono Additionally, viewing other stationary images and text such as ↔ SRS TruSurround XT NICAM Mono NICAM (Normal) stock market reports, video game displays, station logos, web TruSurround XT is a patented SRS technology that solves sites or computer graphics and patterns, should be limited as Stereo Mono the problem of playing 5.1 multichannel content over NICAM Stereo ↔ described above for all televisions. Displaying any stationary two speakers. TruSurround delivers a compelling, virtual NICAM (Normal) images that exceed the above guidelines can cause surround sound experience through any two-speaker Dual-I Dual-II Mono uneven aging of picture tubes (CRTs) that leave subtle, NICAM Dual-I/II ↔ ↔ playback system, including internal television speakers. NICAM NICAM (Normal) but permanent burned-in ghost images in the television It is fully compatible with all multichannel formats. picture. To avoid this, vary the programming and images, ➢ You can select these options simply by pressing the A2 Stereo and primarily display full screen moving images, not SRS button. Type of broadcast On-screen indication stationary patterns or dark bars. On television models that ☛ TruSurround XT, SRS and ( ) offer picture sizing features, use these controls to view the Symbol are trademarks of SRS Labs, Regular broadcast Mono different formats as a full screen picture. Inc. TruSurround XT technology is (Standard audio) (Normal use) incorporated under license from SRS Labs, Inc. Bilingual or Dual-I/II Dual-I ↔ Dual-II Be careful in the selection and duration of television formats used for viewing. Uneven CRT aging as a result of format Mono Stereo selection and use, as well as other burned-in images, is not Stereo ↔ (Forced mono) continued... covered by your Samsung limited warranty. continued... English - 6
AA68-03904A_Eng.indd 6 2007-03-30 ｿﾀﾀ・1:46:22
Get user manuals: See SafeManuals.com 2 2 1 1
2 1
Teletext Feature (depending on the model) Troubleshooting
Most television stations provide written information services 1 (index) Before contacting the Samsung after-sales service, perform via teletext. The index page of the teletext service gives you Used to display the index (contents) page at any time while the following simple checks. If you cannot solve the problem information on how to use the service. In addition, you can you are viewing teletext. using the instructions below, note the model and serial number select various options to suit your requirements by using the 2 (reveal) 2 of the television and contact your local dealer. remote control buttons. Used to display the hidden text (answers to quiz games, ☛ For teletext information to be displayed correctly, channel for example). To display normal screen, press1 it again. No sound or picture reception must be stable. Otherwise, information may be 3 Check that the mains lead has been connected to a wall missing or some pages may not be displayed. (hold) Used to hold the2 display on a given page if the selected socket. page is linked with several secondary pages which follow Check that you have pressed the “ I ” button on automatically. To resume, press it again. (On/Off) and the POWER button. 1 4 Check the picture contrast and brightness settings. (size) Check the volume. Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To Normal picture but no sound display normal screen, press it once again. 2 Check the volume. 5 (store) Check whether the volume MUTE button on the remote Used to store the teletext pages. control has been pressed. 1 2 6 (mode) No picture or black and white picture Press to select the teletext mode (LIST/FLOF). If you press it in the2 LIST mode, it1 switches into the List Adjust the colour settings. save mode. In the2 List save mode, you can save teletext Check that the broadcast system selected is correct. 1 page into list using the (store) button. Sound and picture interference 7 1 (sub-page) Try to identify the electrical appliance that is affecting the Used to display the available sub-page. television, then move it further away. 8 (page up) Plug the television into a different mains socket. Used to display the next teletext page. 2 Blurred or snowy picture, distorted sound 9 (page down) Used to display the previous teletext page. Check the direction, location and connections of your 1 2 aerial. 0 (cancel) This interference often occurs due to the use of an indoor Used to display the broadcast when searching for1 a page. aerial. ! (teletext on/mix) Press to activate teletext mode after selecting the channel Remote control malfunctions providing the teletext service. Press it again to overlap the Replace the remote control batteries. teletext with the current broadcasting screen. Clean the upper edge of the remote control (transmission @ window). Colored buttons (red/green/yellow/blue) If the FASTEXT system is used by a broadcasting Check that the “+” and “-” ends of the batteries are company, the different topics covered on a teletext page inserted correctly. are colour-coded2 and can be selected by pressing the Check that the batteries are drained. coloured buttons. Press one of them corresponding to the required.1 The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button.
Continued...
English - 7
AA68-03904A_Eng.indd 7 2007-03-30 ｿﾀﾀ・1:46:24
Get user manuals: See SafeManuals.com OSD Map ✽ : It is variable depending on the model. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Input – Source List ✽ – Edit Name ✽ – VCR / DVD / Cable STB / HD STB / Sat. STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR (DVD HDD Recorder) / PC (Applicable in the European Union and other European countries with separate collection systems) Picture – Mode – Mode – Dynamic / Standard / Movie / Custom – Contrast This marking shown on the product – Brightness or its literature, indicates that it – Sharpness should not be disposed with other – Colour household wastes at the end of its – Tint (NTSC only) working life. – Colour Tone – Cool2 / Cool1 / Normal / Warm1 / Warm2 To prevent possible harm to the – Reset environment or human health from ✽ – Size – Nomal / Zoom1 / Zoom2 uncontrolled waste disposal, please – Auto Wide / 16:9 / Zoom1 / Zoom2 / 4:3 (Wide model) separate this from other types of – Digital NR – Off / On ✽ wastes and recycle it responsibly – Tilt to promote the sustainable reuse of – Film Mode – Off / On – PIP ✽ – PIP – Off / On material resources. – Source ✽ Household users should contact – Swap either the retailer where they purchased this product, or their – Size local government office, for details of where and how they can – Position take this item for environmentally safe recycling. – Prog. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product Sound – Mode – Standard / Music / Movie / Speech / Custom should not be mixed with other commercial wastes for – Equalizer disposal. – SRS TruSurround XT – Off / On – Auto Volume – Off / On – Turbo Sound – Off / On – Pseudo Stereo – Off / On Channel – Auto Store – Country – Belgium / France / Germany / Italy / Netherlands / Spain / Sweden / Switzerland / United Kingdom / Others / Eastern Europe – Search – Manual Store – Prog. – Colour System – Auto / PAL / SECAM / NTSC4.43 – Sound System – B/G / D/K / I / L – Channel – Search – Store – Channel Manager – Sort – Name – Fine Tune – LNA ✽ Setup – Plug & Play – Language ✽ – Time – Clock Set – Sleep Timer – On Timer – Off Timer – Blue Screen – Off / On – Melody – Off / On
English - 8
AA68-03904A_Eng.indd 8 2007-03-30 ｿﾀﾀ・1:46:31
Get user manuals: See SafeManuals.com