DOCSLIB.ORG

US EPA, Pesticide Product Label, SYSSTEM-K BLUE,06/02/2017

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
US EPA, Pesticide Product Label, SYSSTEM-K BLUE,06/02/2017 UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, D.C. 20460 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION June 2, 2017 Jamie Guillory Consultant Agro-K Corporation c/o Spring Trading Company 203 Dogwood Trail Magnolia, TX 77354 Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment – Acceptable Revision to the Directions for Use, and Addition of Required First Aid and Chemigation Language Product Name: Sysstem-K Blue EPA Registration Number: 48222-10 Application Date: 05/08/2017 OPP Decision Number: 529455 Dear Ms. Guillory: The amended labeling referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This approval does not affect any terms or conditions that were previously imposed on this registration. You continue to be subject to existing terms or conditions on your registration and any deadlines connected with them. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3. Should you wish to add/retain a reference to your company’s website on your label, then please be aware that the website becomes labeling under FIFRA and is subject to review by the U.S. Environmental Protection Agency (EPA). If the website is false or misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims Page 2 of 2 EPA Reg. No. 48222-10 OPP Decision No. 529455 made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the EPA find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA-approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance. Your release for shipment of this product constitutes acceptance of these terms. If these terms are not complied with, this registration will be subject to cancellation in accordance with FIFRA section 6. If you have any questions, please contact Alex Horansky by phone at (703) 347-0128 or via email at [email protected]. Sincerely, Andrew Bryceland, Team Leader Biochemical Pesticides Branch Biopesticides and Pollution Prevention Division (7511P) Office of Pesticide Programs Enclosure 06/02/2017 Sysstem-K Blue Agricultural Fungicide 48222-10 ACTIVE INGREDIENTS: Mono- and dipotassium phosphites*............................................................................. 57 % OTHER INGREDIENTS: .......................................................................................................... 43 % TOTAL…. ......................................................................................................... …. 100.0 % *Contains 6.3 lbs./gallon of active ingredients, mono- and dipotassium salts of Phosphorous Acid. Equivalent to 4.1 lbs. Phosphorous Acid/gallon. KEEP OUT OF THE REACH OF CHILDREN CAUTION FIRST AID STATEMENTS If swallowed x Call a poison control center or doctor immediately for treatment advice. x Have person sip a glass of water if able to swallow. x Do not induce vomiting unless told to by a poison control center or doctor. x Do not give anything to an unconscious person. If on skin x Take off contaminated clothing. x Rinse skin immediately with plenty of water for 15-20 minutes. x Call a poison control center or doctor for treatment advice. If in eyes x Hold eye open and rinse slowly and gently with water for 15-20 minutes. x Remove contact lenses, if present, after the first 5 minutes; then continue rinsing eye. x Call a poison control center or doctor for treatment advice. If inhaled x Move person to fresh air. x If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferable mouth-to-mouth if possible. x Call a poison control center or doctor for further treatment advice. +27/,1( Have the product container or label with you when calling a poison control center or doctor, or going for treatment. For emergency information concerning this product, call the National Pesticides Information Center (NPIC) at 1-800-858- 7378 seven days a week, 6:30 am to 4:30 pm Pacific Time (NPIC web site: www.npic.orst.edu). SEE BACK PANEL FOR ADDITIONAL PRECAUTIONARY STATEMENTS EPA REG. NO. 48222-10 NET CONTENTS: 2.5 gal.___ 5.0 gal___ 275 gal___ EPA EST. NO. 48222-MN-001 BATCH CODE: ________________ CA REG. NO 48222-10-AA-CA PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION: Causes moderate eye irritation. Harmful if swallowed. Harmful if absorbed through skin. Avoid contact with skin, eyes or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse. Wear coveralls over long- sleeved shirt, long pants, socks, shoes, chemical resistant gloves, and protective eyewear. PERSONAL PROTECTIVE EQUIPMENT (PPE) Applicators and other handlers must wear long-sleeved shirt and long pants, shoes plus socks and protective eyewear. Follow manufacturer's instructions for cleaning/maintaining personal protective equipment (PPE). If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry. When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. USER SAFETY RECOMMENDATIONS Users should wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. Users should remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Users should remove PPE immediately after handling this product. As soon as possible, wash thoroughly and change into clean clothing. ENVIRONMENTAL HAZARDS For terrestrial uses: Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment wash waters or rinsate. DIRECTIONS FOR USE Itis a violation of Federal Law to use this product in a manner inconsistent with its labeling. Read entire label before using this product. Do not apply this product in a way that will contact workers or other person, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the State or Tribal agency responsible for pesticide regulation. AGRICULTURAL USE REQUIREMNTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Workers Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated such as plants, soil, or water, is: coveralls over long-sleeved shirt and long pants, socks, shoes, chemical resistant gloves and protective eyewear. NON-AGRICULTURAL USE REQUIREMENTS The requirements of this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. Do not enter treated areas without protective clothing until sprays have dried. 2 GENERAL APPLICATION INSTRUCTIONS Apply SYSSTEM-K Blue by various application methods, including foliar sprays, trunk injection, soil drench, soil incorporation, and bare root dip. For foliar sprays, apply SYSSTEM-K Blue with sufficient water for adequate coverage of foliage, according to crop and growth stage. To insure good coverage, spray to wet. MIXING INSTRUCTIONS 1. Fill the spray tank with 1/2 of the required volume of water 2. Add SYSSTEM-K Blue slowly to the tank and agitate by hydraulic or mechanical means. 3. Continue to fill the tank with water to the desired volume while agitating. 4. Continue agitation when applying. For 1 gallon, (3.785 liters) container sizes: this package can treat up to 34,848 sq. ft. at the maximum treatment rate. For 2 1/2 gallon (9.463 liters) container sizes: this package can treat up to 2 acres at the maximum treatment rate. For 5 gallon (18.925 liters) container sizes: this package can treat up to 4 acres at the maximum treatment rate. LOW VOLUME AND ULTRA-LOW VOLUME APPLICATIONS Label rates are written for conventional application equipment. For LV/ULV equipment, use per acre rate of SYSSTEM-K Blue and adjust amount of water to equipment needs.
Load more

Recommended publications
  • Non-Wood Plants As Raw Material for Pulp and Paper
    AGRICULTURAL AND FOOD SCIENCE IN FINLAND Vol. 10 (2001): Supplement 1. Non-wood plants as raw material for pulp and paper Katri Saijonkari-Pahkala MTT Agrifood Research Finland, Plant Production Research FIN-31600 Jokioinen, Finland, e-mail: [email protected] ACADEMIC DISSERTATION To be presented, with the permission of the Faculty of Agriculture and Forestry, University of Helsinki, for public criticism at Infokeskus Korona, Auditorium 1, on November 30, 2001, at 12 o’clock. 1 Supervisors: Professor Pirjo Peltonen-Sainio Plant Production Research MTT Agrifood Research Finland Jokioinen, Finland Professor Timo Mela Plant Production Research MTT Agrifood Research Finland Jokioinen, Finland Reviewers: Dr. Staffan Landström Swedish University of Agricultural Sciences Umeå, Sweden Professor Bruno Lönnberg Laboratory of Pulping Technology Åbo Akademi University Turku, Finland Opponent: Dr. Iris Lewandowski Department of Science, Technology and Society Utrecht University Utrecht, the Netherlands Custos: Professor Pirjo Mäkelä Department of Applied Biology University of Helsinki Helsinki, Finland AGRICULTURAL AND FOOD SCIENCE IN FINLAND Vol. 10 (2001): Supplement 1. KSP 2001 “A new fiber crop must fit the technical requirements for processing into pulp of acceptable quality in high yield and must also be adaptable to practical agricul- tural methods and economically produce high yield of usable dry matter per acre”. Nieschlag et al. (1960) 3 AGRICULTURAL AND FOOD SCIENCE IN FINLAND Vol. 10 (2001): Supplement 1. Preface The present study was carried out at the MTT Agrifood Research Finland between 1990 and 2000. I wish to extend my gratitude to the Directors of the Crop Science Department, Professor Emeritus Timo Mela and his successor Professor Pirjo Peltonen-Sainio for offering me the financial and insti- tutional framework in which to do this research.
    [Show full text]
  • Investigation of the Mechanical Properties of Flax Cell Walls During Plant Development: the Relation Between Performance and Cell Wall Structure
    fibers Communication Investigation of the Mechanical Properties of Flax Cell Walls during Plant Development: The Relation between Performance and Cell Wall Structure Camille Goudenhooft 1,* ID , David Siniscalco 1, Olivier Arnould 2 ID , Alain Bourmaud 1, Olivier Sire 3, Tatyana Gorshkova 4 ID and Christophe Baley 1 1 Institut de Recherche Dupuy de Lôme (IRDL), Université Européenne Bretagne, CNRS FRE 3744, 56321 Lorient, France; [email protected] (D.S.); [email protected] (A.B.); [email protected] (C.B.) 2 Laboratoire de Mécanique et Génie Civil (LMGC), Université de Montpellier, CNRS UMR 5508, 34095 Montpellier, France; [email protected] 3 Institut de Recherche Dupuy de Lôme (IRDL), Université Européenne Bretagne, CNRS FRE 3744, 56017 Vannes, France; [email protected] 4 Kazan Institute of Biochemistry and Biophysics (KIBB), Kazan Scientific Centre, Russian Academy of Sciences, 420111 Kazan, Russia; [email protected] * Correspondence: [email protected]; Tel.: +33-297-874-518 Received: 22 December 2017; Accepted: 11 January 2018; Published: 17 January 2018 Abstract: The development of flax (Linum usitatissimum L.) fibers was studied to obtain better insight on the progression of their high mechanical performances during plant growth. Fibers at two steps of plant development were studied, namely the end of the fast growth period and at plant maturity, each time at three plant heights. The indentation modulus of the fiber cell wall was characterized by atomic force microscopy (AFM) using peak-force quantitative nano-mechanical property mapping (PF-QNM). Changes in the cell wall modulus with the cell wall thickening were highlighted.
    [Show full text]
  • Growing Hemp for Fiber Or Grain
    Growing Hemp for Fiber or Grain Presented by: Dr. Craig Schluttenhofer Research Assistant Professor of Natural Products Agriculture Research Development Program Fiber and Grain Hemp ▪ Can fit into existing grain/forage crop production models ▪ The major limitation is finding a processor that will purchase these crops Hemp: A Bast Fiber Planting a Fiber Crop ▪ Use a fiber or dual-purpose (fiber and grain) variety directly seeded into the field ▪ Plant mid-May to late-May ▪ Planted ¼ to ½ deep with a grain drill ▪ High plant density (30-35 live seed/ft2), ~60 lbs./A ▪ Use 7-8” between rows for quick canopy closure and weed suppression Growing Hemp for Fiber ▪ Plant should reach 10-15+ ft - the taller the better - long slender stems ▪ Best estimates for fertility - N: 50-100 lbs./acre - P: 45-60 lbs./acre - K: 35-100 lbs./acre Fiber Crop Maturity ▪ When male plants are at starting to flower ▪ Usually this will be mid-August for Ohio ▪ Cut with a sickle-bar or disc mower ▪ Leave to ret Retting ▪ Retting is a controlled rotting process that loosens the fibers from the hurd ▪ Cut green stalks are left in the field 2-6 weeks to “ret” ▪ Relies on fungi and bacteria to degrade pectin binding fibers to the hurd ▪ Turns brown to gray color, some charcoal covered spots “Bowstring” Test ▪ Natural separation of the fiber from the hurd during the retting process ▪ Indication the stalks are properly retted ▪ Further retting leads to decline in fiber quality and quantity Baling ▪ 1-ton round or square bales ▪ Moisture content – 16% or below to avoid molding, <10% may result in brittleness and impact fiber quality ▪ Avoid contaminating weeds in bales ▪ Avoid getting any plastic or debris in bales ▪ Do not bale up stones as they will cause damage to farm and factory equipment.
    [Show full text]
  • Industrial Hemp in the United States: Status and Market Potential
    Industrial Hemp in the United States: Status and Market Potential Abstract Industrial hemp has been the focus of official interest in several States. However, hemp and marijuana are different varieties of Cannabis sativa, which is classified as a con- trolled substance in the United States. With Canada now allowing hemp production, questions have been raised about the demand for hemp products. U.S. markets for hemp fiber (specialty textiles, paper, and composites) and seed (in food or crushed for oil) are, and will likely remain, small, thin markets. Uncertainty about longrun demand for hemp products and the potential for oversupply discounts the prospects for hemp as an eco- nomically viable alternative crop for American farmers. Keywords: industrial hemp, markets, bast fiber, hurds, seed, oil. The use of commercial or trade names does not imply approval or constitute endorse- ment by USDA. Washington, DC January 2000 Contents Executive Summary . .iv Introduction . .1 Identification: Industrial Hemp or Marijuana? . .2 History . .3 Industrial Hemp in Canada . .3 Plant Characteristics and Growing Requirements . .4 Harvesting, Retting, and Fiber Separation . .5 Harvesting . .5 Retting . .5 Fiber Separation . .5 U.S. Hemp Fiber and Fabric Imports . .9 Fiber Markets . .10 Specialty Textiles . .10 Paper and Composites . .13 Other Potential Uses . .13 Hemp Hurds . .14 Seed Markets . .15 Potential U.S. Production and Processing . .17 Possible Yields . .17 Processing . .17 Estimated Costs and Returns . .18 U.S. Experience With Kenaf and Flax . .23 State Study Findings . .24 Conclusions . .25 References . .27 Appendix I: Health Canada—Commercial Production of Industrial Hemp . .29 Appendix II: Oversupply of Small, Thin Markets .
    [Show full text]
  • Natural Fibers and Fiber-Based Materials in Biorefineries
    Natural Fibers and Fiber-based Materials in Biorefineries Status Report 2018 This report was issued on behalf of IEA Bioenergy Task 42. It provides an overview of various fiber sources, their properties and their relevance in biorefineries. Their status in the scientific literature and market aspects are discussed. The report provides information for a broader audience about opportunities to sustainably add value to biorefineries by considerin g fiber applications as possible alternatives to other usage paths. IEA Bioenergy Task 42: December 2018 Natural Fibers and Fiber-based Materials in Biorefineries Status Report 2018 Report prepared by Julia Wenger, Tobias Stern, Josef-Peter Schöggl (University of Graz), René van Ree (Wageningen Food and Bio-based Research), Ugo De Corato, Isabella De Bari (ENEA), Geoff Bell (Microbiogen Australia Pty Ltd.), Heinz Stichnothe (Thünen Institute) With input from Jan van Dam, Martien van den Oever (Wageningen Food and Bio-based Research), Julia Graf (University of Graz), Henning Jørgensen (University of Copenhagen), Karin Fackler (Lenzing AG), Nicoletta Ravasio (CNR-ISTM), Michael Mandl (tbw research GesmbH), Borislava Kostova (formerly: U.S. Department of Energy) and many NTLs of IEA Bioenergy Task 42 in various discussions Disclaimer Whilst the information in this publication is derived from reliable sources, and reasonable care has been taken in its compilation, IEA Bioenergy, its Task42 Biorefinery and the authors of the publication cannot make any representation of warranty, expressed or implied, regarding the verity, accuracy, adequacy, or completeness of the information contained herein. IEA Bioenergy, its Task42 Biorefinery and the authors do not accept any liability towards the readers and users of the publication for any inaccuracy, error, or omission, regardless of the cause, or any damages resulting therefrom.
    [Show full text]
  • Elementary Level
    Grades: K - 5 ELEMENTARY LEVEL CURRICULUM GUIDE Permission to distribute any part or the whole of this material via e-mail or individual copies is automatically granted on the condition it will be used for non- commercial purposes and will not be sold. To reproduce the Elementary Curriculum Guide in any other format, including Internet websites, written permission is needed from the Women of the National Agricultural Aviation Association [WNAAA]. AGRICULTURAL AVIATION: Critical Assist for the World’s Food Supply Elementary Education Curriculum Guide Presentation Outline I. The intent and purpose of the elementary agricultural aviation curriculum guide. A. To introduce the service industry of agricultural aviation to educators and students. 1. The history of agricultural aviation. a. The development/need for the service in agriculture. b. The evolution of the industry. 2. The agricultural aviation industry as it exists today. a. The people involved in agricultural aviation. b. The importance of the industry of agricultural (forestry, disease control) 3. The future of agricultural aviation. a. The role it plays in the continued production of food and fiber. B. To provide insight into the usefulness and importance of agricultural aviation. 1. Agricultural aviation assists the growers of food and fiber. a. Agricultural aviation impacts the lives of people through the food they eat and the clothes they wear. 2. Agricultural aviation provides service to Federal, State and Local Governments. a. The industry assists in protecting the forests, therefore affecting the shelter of many people. b. When called upon, the agricultural aviation industry assists in controlling insects considered health threats. C.
    [Show full text]
  • Kenaf: Annual Fiber Crop Products Generate a Growing
    synthesis gas (a mixture of carbon of the cheapest per unit weight as well monoxide and hydrogen), and syn- as one of the most abundant renewable thetie natural gas. These materials, in resources that we have. turn, provide raw materials identical to those used in the existing petrochemi- Summary cal industry. Plants contain a host of compounds In summary, lignocellulosic materi- that are chemically useful in making als are a resource that will always be industrial products. To develop indus- produced at the same time that we are trial products, we need to think of producing crops for food, feed, fiber, plants not just as commodities but as or chemicals. Wood wastes, harvest- "living factories" for chemical raw able field residues, and most food- materials. The major materials present processing wastes can be collected as in all plants are the three described sources of lignocellulosics. The here—oils, starches, and chemical functions of lignocellulosics lignocellulosics—and protein and permit their use either directly as naturally derived chemicals. Together, chemical derivatives or indirectly as a these materials are the source of a source of C-H-O compounds for fur- broad range of products from medi- ther chemical synthesis. As a category cines to newsprint, from jet engine of materials, lignocellulosics are one lubricants to lipstick. □ by Charles S. Taylor, Genera! Kenaf: Manager, Kenaf International, McAHen, TX, and Daniel E. Kugler, Director, Annual Fiber Office of Agriculturai Materials, CSRS, Crop Products USDA, Washington, DC Generate a Growing Response From Industry "Don't put shade on it." newer groups of interested farmers in That is the only general crop man- the Mississippi Delta, the plains of agement recommendation for the Oklahoma, the tidewaters of the Caro- steadily increasing number of kenaf linas, and the valleys of California— growers in areas of south Texas and are quickly learning that growing this southern Louisiana.
    [Show full text]
  • Natural Fiber Reinforced Green Composites with Epoxy Polymer Matrix and Its Mechanical Properties Analysis
    International Journal on Recent Technologies in Mechanical and Electrical Engineering (IJRMEE) ISSN: 2349-7947 Volume: 5 Issue: 6 12- 19 _____________________________________________________________________________________ Natural Fiber Reinforced Green Composites with Epoxy Polymer Matrix and its Mechanical Properties Analysis 1 R. Suresh S.Bala Anki Reddy2 Department of Mechanical Engineering Department of Mechanical Engineering Siddartha Institute of Science and Technology Siddartha Institute of Science and Technology Puttur, India Puttur, India [email protected] [email protected] V.S. Ravi3 Department of Mechanical Engineering Siddartha Institute of Science and Technology Puttur, India [email protected] Abstract—Present scenario, the most of the materials used for diverse applications are alternative materials as composite materials, in this maximum of the researchers are explored invention of natural fiber reinforced green composites because of easy accessibility of natural fibers and treating of natural fibers are simple and renewable, good mechanical properties, cheap and ecofriendly. In this investigation, the availability of different natural fibers and its mechanical properties and also manufacturing of NF (Sisal, Kneaf) reinforced epoxy polymer matrix green composites are discussed. The essential properties required for engineering applications are tested and evaluated. This paper concludes that the manufacturing of Natural Fiber Reinforced Polymer Composite Lamina by hand layup process and the properties
    [Show full text]
  • Industrial Hemp in the United States: Status and Market Potential
    Appendix III State Report Summaries Summary · Bast fibers contribute an exceedingly small frac- Report to the Governor's Hemp and tion of world textile fiber supply, which is over- Related Fiber Crops Task Force whelmingly dominated by cotton. Increasing world Commonwealth of Kentucky, demand and price for cotton in recent years has generated some interest in alternative fibers. June 1995 However, extraction and processing of bast fibers · Most analysts forecast long-term increases in for high-quality textiles is more difficult than for world demand for all types of fibrous materials, cotton. A large investment, and perhaps some tech- and some predict limitations in production capacity. nological innovation, will be required by the textile New fiber crops, new industrial uses of nonwood industry if bast fibers are to become competitive as fibers, and agricultural diversification in general mass market textiles. are therefore subjects of widespread interest. Kentucky agriculture is not alone in efforts to pur- · Use of annual fiber crops for most paper applica- sue these possibilities, and will be required to com- tions or for building materials, as a substitute for pete with producers in other states and nations. wood or recycled fiber, could create a very large but relatively low value market. Crop prices above · Kentucky history, as well as recent research in $60/ton would probably be required to interest other temperate zone countries, demonstrates that most producers; this price might preclude extensive hemp can be produced in the Commonwealth. competition in this market. Vast quantities of Selection of adapted varieties, crop management fibrous waste materials (sugar cane bagasse, straw) practices, harvesting technology and several other are available world wide and would also compete agronomic aspects may require a significant for such applications.
    [Show full text]
  • Plant Fibers and Phenolics: a Review on Their Synthesis, Analysis and Combined Use for Biomaterials with New Properties
    fibers Review Plant Fibers and Phenolics: A Review on Their Synthesis, Analysis and Combined Use for Biomaterials with New Properties Roberto Berni 1,2 , Giampiero Cai 1 , Jean-Francois Hausman 3 and Gea Guerriero 3,* 1 Department of Life Sciences, University of Siena, Via P.A. Mattioli 4, I-53100 Siena, Italy 2 Trees and Timber Institute-National Research Council of Italy (CNR-IVALSA), Via Aurelia 49, I-58022 Follonica (GR), Italy 3 Environmental Research and Innovation Department, Luxembourg Institute of Science and Technology, 5, Avenue des Hauts-Fourneaux, L-4362 Esch/Alzette, Luxembourg * Correspondence: [email protected]; Tel.: +352-275-888-5023 Received: 13 June 2019; Accepted: 26 August 2019; Published: 31 August 2019 Abstract: Devising environmental-friendly processes in biotechnology is a priority in the current economic scenario. Weare witnessing a constant and steady push towards finding sustainable solutions to societal challenges by promoting innovation-driven activities minimizing the environmental impact and valorizing natural resources. In bioeconomy, plants are among the most important renewable sources of both fibers (woody and cellulosic) and phytochemicals, which find applications in many industrial sectors, spanning from the textile, to the biocomposite, medical, nutraceutical, and pharma sectors. Given the key role of plants as natural sources of (macro)molecules, we here provide a compendium on the use of plant fibers functionalized/impregnated with phytochemicals (in particular phenolic extracts). The goal is to review the various applications of natural fibers functionalized with plant phenolics and to valorize those plants that are source of both fibers and phytochemicals. Keywords: plant fibers; cellulose; secondary metabolism; phenolics 1.
    [Show full text]
  • Hemp: a New Crop with New Uses for North America*
    Reprinted from: Trends in new crops and new uses. 2002. J. Janick and A. Whipkey (eds.). ASHS Press, Alexandria, VA. Hemp: A New Crop with New Uses for North America* Ernest Small and David Marcus “Hemp” refers primarily to Cannabis sativa L. (Cannabaceae), although the term has been applied to dozens of species representing at least 22 genera, often prominent fiber crops. For examples, Manila hemp (abaca) is Musa textilis Née, sisal hemp is Agave sisalina Perrine, and sunn hemp is Crotolaria juncea L. Especially confusing is the phrase “Indian hemp,” which has been used both for narcotic Asian land races of C. sativa (so-called C. indica Lamarck of India) and Apocynum cannabinum L., which was used by North American Indians as a fiber plant. Cannabis sativa is a multi-purpose plant that has been domesticated for bast (phloem) fiber in the stem, a multi-purpose fixed oil in the “seeds” (achenes), and an intoxicating resin secreted by epidermal glands. The common names hemp and marijuana (much less frequently spelled mari- huana) have been applied loosely to all three forms, although historically hemp has been used primarily for the fiber cultigen and its fiber preparations, and marijuana for the drug cultigen and its drug preparations. The current hemp industry is making great efforts to point out that “hemp is not marijuana.” Italicized, Cannabis refers to the biological name of the plant (only one species of this genus is commonly recognized, C. sativa L.). Non-italicized, “cannabis” is a generic abstraction, widely used as a noun and adjective, and commonly (often loosely) used both for cannabis plants and/or any or all of the intoxicant preparations made from them.
    [Show full text]
  • Cotton: the Fabric of Our Lives
    Cotton: The Fabric of Our Lives By Angela Box Oils, balls, swabs, bandages, tissue, paper, napkins, diapers, socks, underwear, shirts, shorts, sweaters, pants, coats, towels, linen, cushions, drapery, upholstery, rugs, carpet, comforters, mattresses, insulation, filtration, and many other things that are used daily by everyone are composed of, or inspired by cotton. Cotton is a soft, fluffy, naturally occurring fiber plant that can be processed into an array of materials and goods. Many, many things that we wear, sleep on, sleep under, walk on, or utilize in wound-care, etc., contain some percentage of cotton. It is a fiber that is used everyday, by everyone, in one way or another. It has qualities that have made it a choice crop for centuries around the world. Today though, cotton is being largely displaced by synthetic fibers that have qualities that exceed the natural crop plant. These fibers can also be mass-produced and sold at relatively lower costs. Still, cotton stands alone as the most utilized fiber crop plant used around the world. Also known as "King Cotton," in the United States, it was the major force behind the institution of the American age of slavery, and cotton prevailed as the economic source for the southern states of the United States and its antebellum prosperity before the civil war. It holds an important place in America's past, present, and future. Cotton is truly the "Fabric of Our Lives". Characteristics Cotton is an annual, biennial or perennial plant, but in cultivation it is generally treated as an annual; herbaceous to short shrub or small tree - two to six feet tall.
    [Show full text]