Submittal / Data Sheet
Total Page:16
File Type:pdf, Size:1020Kb
SUBMITTAL / DATA SHEET 8370 East Hwy 78 Villa Rica, GA 30180 800-334-9823 770-942-1207 Fax 942-4173 Concealed fastening holes @ 1" centers. Dentils are precisionaly cut out on our state-of-the-art CNC turret punch, formed and dressed for a neat crisp appearance. Dentils slide into inset Frieze fascias are factory punched for accurate field placement area and field fastened of dentils. We offer 3 types of dentils in 2 widths. We have also with concealed rivets. produced custom shapes for historical renovations. Dentils may be spaced as close as 1" with incremental increases of 1". DENTIL INSTALLATION 1 42" Square Dentil Inset 21" Scalloped Dentil Inset 4 SMALL DENTIL SET Type C large frieze is shown as an example only, all frieze mouldings may be used for Dentils. 1 42" 3" LARGE DENTIL SET Dentils are available in 2 & 4 inch widths. 8" 3" EXPANDED DENTIL SET Drawing No. 63 SUBMITTAL / DATA SHEET 8370 East Hwy 78 Villa Rica, GA 30180 800-334-9823 770-942-1207 Fax 942-4173 Engravings Engravings are manufactured from 0.125" thick aluminum panels milled to a depth of 0.096". Engravings are field applied with structural adhesives and minimal fasteners strategically placed in the engravings milled area. Corners can be factory formed or field cut with butt edges. Custom engravings can also be produced and we encourage you to submit your design. 6" 6" Greek Anthemion & Palmette Reed 6" 6" Scroll Meander Drawing No. 62 SUBMITTAL / DATA SHEET 8370 East Hwy 78 Villa Rica, GA 30180 800-334-9823 770-942-1207 Fax 942-4173 Flutes Easy Application; Flutes are installed by simply Typical Flute fastening a flute retainer plate to the frieze fascia. Spacing of flutes is at the designers discretion, however, flutes should be avoided at cornice joints (expansion reveals). Flute Retainer Flutes slide onto their retainer plates and are locked into position with the installation of adjoining cornice members. Important! Flutes must be attached to the frieze fascia prior to its' installation. Adjacent cornice members show as an example. 1 3 12" 4" Flute closure cleat. Fabricated 91" as requited for adjoining 4 cornice members. SECTION A-A A A 3 4" 1 94" SECTION A-A Flutes are provided with a beveled edge when abutting sloped ledges. 3 4" 1 94" SECTION A-A Drawing No. 61 .