Nanotechnology White Paper

Total Page:16

File Type:pdf, Size:1020Kb

Nanotechnology White Paper EPA 100/B-07/001 | February 2007 www.epa.gov/osa Nanotechnology White Paper Office of the Science Advisor Science Policy Council EPA 100/B-07/001 February 2007 U.S. Environmental Protection Agency Nanotechnology White Paper Prepared for the U.S. Environmental Protection Agency by members of the Nanotechnology Workgroup, a group of EPA’s Science Policy Council Science Policy Council U.S. Environmental Protection Agency Washington, DC 20460 ii EPA Nanotechnology White Paper DISCLAIMER This document has been reviewed in accordance with U.S. Environmental Protection Agency policy and approved for publication and distribution. Mention of trade names or commercial products does not constitute endorsement of recommendation for use. Notwithstanding any use of mandatory language such as "must" and "require" in this document with regard to or to reflect scientific practices, this document does not and should not be construed to create any legal rights or requirements. Cover Images: Left: Computer images of various forms of carbon nanotubes. Images courtesy of Center for Nanoscale Materials, Argonne National Laboratory Right: Computer image of a dendrimer. Image courtesy of Dendritic NanoTechnologies, Inc. Title Page Image: Computer image of a C-60 Fullerene. Laurence Libelo, U.S. EPA. EPA Nanotechnology White Paper iii Nanotechnology White Paper Workgroup Co-Chairs Jeff Morris Jim Willis Office of Research and Development Office of Prevention, Pesticides and Toxic Substances Science Policy Council Staff Kathryn Gallagher Office of the Science Advisor Subgroup Co-Chairs External Coordination Ecological Effects Risk Management Steve Lingle, ORD Anne Fairbrother, ORD Flora Chow, OPPT Dennis Utterback, ORD Tala Henry, OPPTS Vince Nabholz, OPPTS EPA Research Strategy Human Exposures Converging Technologies Barbara Karn, ORD Scott Prothero, OPPT Nora Savage, ORD Nora Savage, ORD Risk Assessment Environmental Fate Pollution Prevention Phil Sayre, OPPTS Bob Boethling, OPPTS Walter Schoepf, Region 2 Laurence Libelo, OPPTS John Scalera, OEI Physical-Chemical Environmental Detection and Sustainability and Society Properties Analysis Diana Bauer, ORD Tracy Williamson, OPPTS John Scalera, OEI Michael Brody, OCFO Richard Zepp, ORD Health Effects Statutes, Regulations, and Public Communications Deborah Burgin, OEI Policies and Outreach Kevin Dreher, ORD Jim Alwood, OPPT Anita Street, ORD iv EPA Nanotechnology White Paper Workgroup Members Suzanne Ackerman, OPA Y’Vonne Jones-Brown, OPPTS Kent Anapolle, OPPTS Edna Kapust, OPPTS Fred Arnold, OPPTS Nagu Keshava, ORD Ayaad Assaad, OPPTS David Lai, OPPTS Dan Axelrad, OPEI Skip Laitner, OAR John Bartlett, OPPTS Warren Layne, Region 5 Sarah Bauer, ORD Do Young Lee, OPPTS Norman Birchfield, OSA Virginia Lee, OPPTS John Blouin, OPPT Monique Lester, OARM, on detail to OIA Jim Blough, Region 5 Michael Lewandowski, ORD Pat Bonner, OPEI Bill Linak, ORD William Boyes, ORD David Lynch, OPPTS Gordon Cash, OPPTS Tanya Maslak, OSA intern Gilbert Castellanos, OIA Paul Matthai, OPPT Tai-Ming Chang, Region 3 Carl Mazza, OAR Paul Cough, OIA Nhan Nguyen, OPPTS Lynn Delpire, OPPTS Carlos Nunez, ORD John Diamante, OIA Onyemaechi Nweke, OPEI Christine Dibble, OPA Marti Otto, OSWER Jeremiah Duncan, AAAS fellow, OPPTS Manisha Patel, OGC Thomas Forbes, OEI Steve Potts, OW Conrad Flessner, OPPTS Mary Reiley, OW Jack Fowle, ORD Mary Ross, OAR Elisabeth Freed, OECA Bill Russo, ORD Sarah Furtak, OW Mavis Sanders, OEI Hend Galal-Gorchev, OW Bernie Schorle, Region 5 David Giamporcaro, OPPTS Paul Solomon, ORD Michael Gill, ORD liaison for Region 9 Timothy Taylor, OSWER Collette Hodes, OPPTS Maggie Theroux-Fieldsteel, Region 1 Gene Jablonowski, Region 5 Stephanie Thornton, OW Lee Hofman, OSWER Alan Van Arsdale, Region 1 Joe Jarvis, ORD William Wallace, ORD Barb Walton, ORD EPA Nanotechnology White Paper v Table of Contents FOREWORD ................................................................................................................................................... VIII ACKNOWLEDGMENTS.................................................................................................................................. IX ACRONYMS.........................................................................................................................................................X EXECUTIVE SUMMARY ...................................................................................................................................1 1.0 INTRODUCTION ...........................................................................................................................................4 1.1 PURPOSE ........................................................................................................................................................4 1.2 NANOTECHNOLOGY DEFINED ........................................................................................................................5 1.3 WHY NANOTECHNOLOGY IS IMPORTANT TO EPA .......................................................................................13 1.4 NATIONAL AND INTERNATIONAL CONTEXT.................................................................................................14 1.5 WHAT EPA IS DOING WITH RESPECT TO NANOTECHNOLOGY .....................................................................18 1.6 OPPORTUNITIES AND CHALLENGES..............................................................................................................21 2.0 ENVIRONMENTAL BENEFITS OF NANOTECHNOLOGY ................................................................22 2.1 INTRODUCTION ............................................................................................................................................22 2.2 BENEFITS THROUGH ENVIRONMENTAL TECHNOLOGY APPLICATIONS.........................................................22 2.3 BENEFITS THROUGH OTHER APPLICATIONS THAT SUPPORT SUSTAINABILITY .............................................24 3.0 RISK ASSESSMENT OF NANOMATERIALS.........................................................................................29 3.1 INTRODUCTION ............................................................................................................................................29 3.2 CHEMICAL IDENTIFICATION AND CHARACTERIZATION OF NANOMATERIALS ..............................................31 3.3 ENVIRONMENTAL FATE OF NANOMATERIALS..............................................................................................32 3.4 ENVIRONMENTAL DETECTION AND ANALYSIS OF NANOMATERIALS ...........................................................40 3.5 HUMAN EXPOSURES AND THEIR MEASUREMENT AND CONTROL ................................................................42 3.6 HUMAN HEALTH EFFECTS OF NANOMATERIALS..........................................................................................52 3.7 ECOLOGICAL EFFECTS OF NANOMATERIALS................................................................................................58 4.0 RESPONSIBLE DEVELOPMENT .............................................................................................................63 4.1 RESPONSIBLE DEVELOPMENT OF NANOSCALE MATERIALS .........................................................................63 4.2 PROGRAM AREAS.........................................................................................................................................65 4.3 ENVIRONMENTAL STEWARDSHIP .................................................................................................................68 5.0 EPA’S RESEARCH NEEDS FOR NANOMATERIALS ..........................................................................70 5.1 RESEARCH NEEDS FOR ENVIRONMENTAL APPLICATIONS ............................................................................70 5.2 RESEARCH NEEDS FOR RISK ASSESSMENT...................................................................................................72 6.0 RECOMMENDATIONS ..............................................................................................................................82 6.1 RESEARCH RECOMMENDATIONS FOR ENVIRONMENTAL APPLICATIONS ......................................................82 6.2 RESEARCH RECOMMENDATIONS FOR RISK ASSESSMENT.............................................................................83 6.3 RECOMMENDATIONS FOR POLLUTION PREVENTION AND ENVIRONMENTAL STEWARDSHIP.........................89 6.4 RECOMMENDATIONS FOR COLLABORATIONS...............................................................................................90 6.5 RECOMMENDATION TO CONVENE AN INTRA-AGENCY WORKGROUP...........................................................91 6.6 RECOMMENDATION FOR TRAINING..............................................................................................................91 6.7 SUMMARY OF RECOMMENDATIONS .............................................................................................................92 7.0 REFERENCES ..............................................................................................................................................93 APPENDIX A: GLOSSARY OF NANOTECHNOLOGY TERMS .............................................................107 APPENDIX B: PRINCIPLES OF ENVIRONMENTAL STEWARDSHIP BEHAVIOR..........................110 APPENDIX C: EPA’S NANOTECHNOLOGY RESEARCH FRAMEWORK..........................................111 APPENDIX D: EPA STAR GRANTS FOR NANOTECHNOLOGY ..........................................................113
Recommended publications
  • Accomplishments in Nanotechnology
    U.S. Department of Commerce Carlos M. Gutierrez, Secretaiy Technology Administration Robert Cresanti, Under Secretaiy of Commerce for Technology National Institute ofStandards and Technolog}' William Jeffrey, Director Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately. Such identification does not imply recommendation or endorsement by the National Institute of Standards and Technology, nor does it imply that the materials or equipment used are necessarily the best available for the purpose. National Institute of Standards and Technology Special Publication 1052 Natl. Inst. Stand. Technol. Spec. Publ. 1052, 186 pages (August 2006) CODEN: NSPUE2 NIST Special Publication 1052 Accomplishments in Nanoteciinology Compiled and Edited by: Michael T. Postek, Assistant to the Director for Nanotechnology, Manufacturing Engineering Laboratory Joseph Kopanski, Program Office and David Wollman, Electronics and Electrical Engineering Laboratory U. S. Department of Commerce Technology Administration National Institute of Standards and Technology Gaithersburg, MD 20899 August 2006 National Institute of Standards and Teclinology • Technology Administration • U.S. Department of Commerce Acknowledgments Thanks go to the NIST technical staff for providing the information outlined on this report. Each of the investigators is identified with their contribution. Contact information can be obtained by going to: http ://www. nist.gov Acknowledged as well,
    [Show full text]
  • Meso/Micro/Nano Scale Technologies
    Meso/Micro/Nano Scale Technologies Clayton Teague, Chief, APTD, MEL John Evans, Chief, ISD, MEL June 8, 1999 Contents of Presentation • What we (MEL) have done in meso-scale area • What is nanotechnology • Nanotechnology is important • Principal message • Why is it important to industry and NIST? – Examples of industry/NIST work at all scales • Challenges for NIST • Long term needs at the nano-scale • Short term needs at the meso/micro-scales • Priorities • Ideas • Discussion topics Background • During past 9 months, MEL has explored measurements and standards needs of meso and micro-scale manufacturing • Visited 20 companies • Conducted and participated in three workshops jointly sponsored with DARPA and NSF • Organized informal NIST-wide co-ordinating group for meso/micro/nano scale activities • All feedback from these efforts points toward an exploding growth of nanotechnology • We see a continuum of needs for NIST efforts from the macro-scale to the nano-scale What is Nanotechnology? • Technology on the scale of atoms -100 pm- up to biomolecular systems as large as cells - 10’s mm • “Top-down” - achieving increased miniaturization through extension of existing microfabrication schemes • “Bottom-up” - capability to construct functional components, devices, and systems from building blocks of atoms and molecules Nanotechnology Strategies Nanotechnology is important! • “We’ve got to learn how to build machines, materials, and devices with the ultimate finesse that life has always used: atom by atom, on the same nanometer scale as the machinery in living cells.” Richard Smalley, Nobel Laureate, 1995 • “I believe nanoscience and nanotechnology will be central to the next epoch of the information age …” John Armstrong, formerly Chief Scientist of IBM, 1991 • “If I were asked for an area of science and engineering that will most likely produce the breakthroughs of tomorrow, I would point to nanoscale science and engineering.” Neal Lane, Director OSTP, 1998 • “Nanotechnology has given us the tools to make contact with the world of the molecule and the atom.
    [Show full text]
  • Nanomaterial Safety
    Nanomaterial Safety What are Nanomaterials? Nanomaterials or nanoparticles are human engineered particles with at least one dimension in the range of one to one hundred nanometers. They can be composed of many different base materials (carbon, silicon, and various metals). Research involving nanomaterials ranges from nano-particle synthesis to antineoplastic drug implants to cell culture work. Material Scientists, Chemists, Biologists, Biochemists, Physicists, Microbiologists, Medical-related disciplines and many engineering disciplines (Mechanical, Chemical, Biological and Environmental, etc.) perform research using nanomaterials. Naturally created particles of this size range are normally called ultra-fine particles. Examples are welding fumes, volcanic ash, motor vehicle exhaust, and combustion products. Nanomaterials come in many different shapes and dimensions, such as: • 0-dimensional: quantum dots • 1-dimensional: nanowires, nanotubes, • 2-dimensional: nanoplates, nanoclays • 3-dimensional: Buckyballs, Fullerenes, nanoropes, crystalline structures Nanoparticles exhibit very different properties than their respective bulk materials, including greater strength, conductivity, fluorescence and surface reactivity. Health Effects Results from studies on rodents and in cell cultures exposed to ultrafine and nanoparticles have shown that these particles are more toxic than larger ones on a mass-for-mass basis. Animal studies indicate that nanoparticles cause more pulmonary inflammation, tissue damage, and lung tumors than larger particles Solubility, shape, surface area and surface chemistry are all determinants of nanoparticle toxicity There is uncertainty as to the levels above which these particles become toxic and whether the concentrations found in the workplace are hazardous Respiratory Hazards: • Nanoparticles are deposited in the lungs to a greater extent than larger particles • Based on animal studies, nanoparticles may enter the bloodstream from the lungs and translocate to other organs and they are able to cross the blood brain barrier.
    [Show full text]
  • Best Practices for Handling Nanoparticles in Laboratories
    Best Practices for Handling Nanoparticles in Laboratories Introduction The purpose of this document is to provide a readily-accessible summary of information currently available on safe work practices for research laboratories working with engineered nanomaterials at Missouri State University. This interim guidance has been compiled from guidance from governmental agencies and universities currently engaged in nanomaterial research sources such as: The Center for Disease Control (CDC), The National Institute for Occupational Safety and Health (NIOSH), The Occupational Safety and Health Administration (OSHA), Department of Energy (DOE), Massachusetts Institute of Technology (MIT), Virginia Tech, and University of Florida. A list of sources can be found in the References section at the end of this document. It should be recognized that rapid changes in the understanding of these risks and management techniques may occur in this field, and researchers are strongly encouraged to stay abreast of these developments. It is anticipated that the internal MSU documents will be used in conjunction with the researcher’s Departmental (or University general) Chemical Hygiene Plan (CHP), and that this guidance is subject to revision as new information or regulatory guidance becomes available. Nanomaterial Definitions Nanoparticles are particles having a diameter of 1 to 100 nanometers (nm) that may or may not have size-related intensive properties. The precise definition of particle diameter depends on particle shape as well as how the diameter is measured. These materials often exhibit unique physical and chemical properties as compared to their parent compounds. They may be suspended in a gas as a nanoaerosol, suspended in a liquid as a colloid or nanohydrosol, or embedded in a matrix as a nanocomposite.
    [Show full text]
  • Nanoparticles, Nanocrystals, and Quantum Dots What They Are, Why They’Re Interesting, and What We Can Do with Them J
    Nanoparticles, nanocrystals, and quantum dots What they are, why they’re interesting, and what we can do with them J. Nadeau, Department of Biomedical Engineering [email protected] Colloidal nanocrystals of different materials… …And different geometries From: Science. 2005 January 28; 307(5709): 538544. Medieval Nanotechnology! The colors in some stained- glass windows from medieval cathedrals are probably due to nanocrystals of compouds of Zn, Cd, S, and Se. History of nanoparticles 1980 Ekimov observed quantum confinement on a sample of glass containing PbS. 1982 Brus L.’s group conducted CdS colloid preparation and investigation of band-edge luminescence properties. 1993 Murray C., Norris D., Bawendi M., Synthesis and Characterization of Nearly Monodisperse CdE (E=S, Se, Te) Semiconductor Nano- crystallites. 1995 Hines M., Guyot-Sionnest P., reported synthesis and Characterization of Strongly Luminescent ZnS-Capped CdSe Nanocrystals 1998 Alivisatos and Nie independently reported Bio-application for core shell dots. 2001 Nie’s group described Quantum dot-tagged microbeads for multiplexed optical coding of biomolecules. 2003 T. Sargent at UOT observed electroluminescence spanning 1000 – 1600 nm originating from PbS nanocrystals embedded in a polymer matrix. What is a quantum dot? • Synthesis • Quantum mechanics • Optical properties WhatWhat isis itit goodgood for?for? ••InterestingInteresting physicsphysics ••ApplicationsApplications inin optoelectronicsoptoelectronics ••ApplicationsApplications inin biologybiology Synthesis Quick
    [Show full text]
  • Projected Roles for Disruptive and Emergent Technologies
    50 Technology as a Driver of Future Change in the Forest Sector Technology as a Driver of Future Change in the Forest Sector: Projected Roles for Disruptive and Emergent Technologies George H. Kubik Abstract: This paper examines emergent and disruptive technologies as potential drivers of change in forest sector futures. Two questions are addressed: (1) Which emergent and disruptive technologies can be projected to substantively impact forestry futures? (2) What are the possible implications of emergent and disruptive technologies for decision makers, policymakers, and other stakeholders involved in forest sector futures? A 20-year timeframe is used for this explorative paper. A cross-disciplinary review of futures literature was implemented to identify and investigate leading emergent and disruptive technologies. A list of candidate technologies was developed from the literature review and eight technologies were selected: artificial intelligence, autonomous vehicles, electronic performance enhancement systems, genomics and synthetic biology, the Internet of Things, materials science, nanotechnology, and robotics. Each of the eight technologies was then defined and three representative forecasts were projected for each technology. The goal is to provide decision makers, policymakers, and other stakeholders in the forest sector with an awareness of emergent and potentially disruptive technologies and how they might disrupt forest sector futures. The purpose of this paper is not to predict the future in detail, but to (1) promote awareness and informed thinking about the relationship between potentially disruptive technologies and forest sector futures and (2) stimulate a research agenda based on the study of these projected futures. KEY WORDS: emergent technology, disruptive technology, artificial intelligence, autonomous vehicles, electronic performance enhancement systems, genomics and synthetic biology, Internet of Things, materials science, nanotechnology and robotics Citation: Kubik, George H.
    [Show full text]
  • Nanoscience and Nanotechnologies: Opportunities and Uncertainties
    ISBN 0 85403 604 0 © The Royal Society 2004 Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the UK Copyright, Designs and Patents Act (1998), no part of this publication may be reproduced, stored or transmitted in any form or by any means, without the prior permission in writing of the publisher, or, in the case of reprographic reproduction, in accordance with the terms of licences issued by the Copyright Licensing Agency in the UK, or in accordance with the terms of licenses issued by the appropriate reproduction rights organization outside the UK. Enquiries concerning reproduction outside the terms stated here should be sent to: Science Policy Section The Royal Society 6–9 Carlton House Terrace London SW1Y 5AG email [email protected] Typeset in Frutiger by the Royal Society Proof reading and production management by the Clyvedon Press, Cardiff, UK Printed by Latimer Trend Ltd, Plymouth, UK ii | July 2004 | Nanoscience and nanotechnologies The Royal Society & The Royal Academy of Engineering Nanoscience and nanotechnologies: opportunities and uncertainties Contents page Summary vii 1 Introduction 1 1.1 Hopes and concerns about nanoscience and nanotechnologies 1 1.2 Terms of reference and conduct of the study 2 1.3 Report overview 2 1.4 Next steps 3 2 What are nanoscience and nanotechnologies? 5 3 Science and applications 7 3.1 Introduction 7 3.2 Nanomaterials 7 3.2.1 Introduction to nanomaterials 7 3.2.2 Nanoscience in this area 8 3.2.3 Applications 10 3.3 Nanometrology
    [Show full text]
  • Department of Pathology and Laboratory Medicine
    January 2018 CURRICULUM VITAE AGNES B. KANE PERSONAL DATA Business Address: Department of Pathology and Laboratory Medicine, Brown University, Box G-E534, Providence, Rhode Island 02912 Business Telephone Number: (401) 863-1110 Fax: (40l) 863-9008 EDUCATION B.A. Swarthmore College, Zoology 1968 M.D. Temple University School of Medicine 1974 Ph.D. Temple University School of Medicine, Experimental Pathology 1976 PROFESSIONAL APPOINTMENTS 1996-2017 Chair, Department of Pathology & Laboratory Medicine, Brown University, Providence, RI 1995-present Professor, Department of Pathology & Laboratory Medicine, Brown University, Providence, RI 1992-present Director, Training Program in Environmental Pathology, Brown University, Providence, RI 1987-95 Associate Professor, Department of Pathology & Laboratory Medicine, Brown University, Providence, RI 1982-87 Assistant Professor, Department of Pathology & Laboratory Medicine, Brown University, Providence, RI 1979-82 Staff Pathologist, Temple University Hospital, Philadelphia, PA 1977-82 Assistant Professor, Department of Pathology and Fels Research Institute, Temple University School of Medicine, Philadelphia, PA 1977-78 Resident in Anatomic Pathology, Temple University Hospital 1976-77 Postdoctoral Fellowship, National Research Service Award under Dr. Nils R. Ringertz, Medical Cell Genetics, Karolinska Institute, Stockholm, Sweden 1975-76 Resident in Anatomic Pathology, Temple University Hospital SPECIALTY BOARD CERTIFICATION 1979 Anatomic Pathology PROFESSIONAL LICENSES Pennsylvania, Rhode Island
    [Show full text]
  • The Nanotoxicology of a Newly Developed Zero-Valent Iron
    The nanotoxicology of a newly developed zero-valent iron nanomaterial for groundwater remediation and its remediation efficiency assessment combined with in vitro bioassays for detection of dioxin-like environmental pollutants Von der Fakultät für Mathematik, Informatik und Naturwissenschaften der RWTH Aachen University zur Erlangung des akademischen Grades eines Doktors der Naturwissenschaften genehmigte Dissertation vorgelegt von Diplom-Biologe Andreas Herbert Schiwy aus Tarnowitz (Polen) Berichter: Universitätsprofessor Dr. rer. nat. Henner Hollert Universitätsprofessor Dr. rer. nat. Andreas Schäffer Tag der mündlichen Prüfung 28. Juli 2016 Diese Dissertation ist auf den Internetseiten der Universitätsbibliothek online verfügbar. To my wife and my children Summary Summary The assessment of chemicals and new compounds is an important task of ecotoxicology. In this thesis a newly developed zero-valent iron material for nanoremediation of groundwater contaminations was investigated and in vitro bioassays for high throughput screening were developed. These two elements of the thesis were combined to assess the remediation efficiency of the nanomaterial on the groundwater contaminant acridine. The developed in vitro bioassays were evaluated for quantification of the remediation efficiency. Within the NAPASAN project developed iron based nanomaterial showed in a model field application its nanoremediation capabilities to reduce organic contaminants in a cost effective way. The ecotoxicological evaluation of the nanomaterial in its reduced and oxidized form was conducted with various ecotoxicological test systems. The effects of the reduced nanomaterial with field site resident dechlorinating microorganisms like Dehalococcoides sp., Desulfitobacterium sp., Desulfomonile tiedjei, Dehalobacter sp., Desulfuromonas sp. have been investigated in batch und column experiments. A short-term toxicity of the reduced nanomaterial was shown.
    [Show full text]
  • Nanodata Landscape Compilation
    NanoData Landscape Compilation Environment Written by the Joint Institute for Innovation Policy, Brussels, Belgium, in co-operation with CWTS, University of Leiden, Leiden, Netherlands; Frost & Sullivan Limited, London, United Kingdom; Joanneum Research Forschungsgesellschaft mbH, Graz, Austria; the Nanotechnology Industries Association, Brussels, Belgium; Tecnalia Research and Innovation, Bilbao, Spain; and TNO, The Hague, Netherlands. August 2016 EUROPEAN COMMISSION Directorate-General for Research and Innovation Directorate Industrial Technologies Unit D.3 - Advanced Materials and Nanotechnologies E-mail: [email protected] European Commission B-1049 Brussels EUROPEAN COMMISSION NanoData Landscape Compilation Environment Written by: Jacqueline E M Allan Babette Bakker Harrie Buist Guillaume Flament Christian Hartmann Iain Jawad Eelco Kuijpers Hanna Kuittinen Ed Noyons Claire Stolwijk Xabier Uriarte Olaeta and Alfredo Yegros Additional contributions: Ashfeen Aribea Iker Barrondo Saez Robbert Fisher Milica Misojcic Luca Remotti Directorate-General for Research and Innovation 2017 Key Enabling Technologies EN EUROPE DIRECT is a service to help you find answers to your questions about the European Union Freephone number (*): 00 800 6 7 8 9 10 11 (*) The information given is free, as are most calls (though some operators, phone boxes or hotels may charge you) LEGAL NOTICE This document has been prepared for the European Commission however it reflects the views only of the authors, and the Commission cannot be held responsible for any use which may be made of the information contained therein. More information on the European Union is available on the internet (http://europa.eu). Luxembourg: Publications Office of the European Union, 2017. PDF ISBN 978-92-79-68388-6 doi: 10.2777/017097 KI-02-17-427-EN-N © European Union, 2017.
    [Show full text]
  • Nt2113 Chemistry of Nanomaterials
    DEPARTMENT OF PHYSICS AND NANOTECHNOLOGY FACULTY OF ENGINEERING AND TECHNOLOGY COURSE PLAN Course Code : NT2113 CHEMISTRY OF NANOMATERIALS Course Title : CHEMISTRY OF NANOMATERIALS Semester : III Course Time : JULY- NOV 2017 Location : SRM.UNIVERSITY Faculty Details Sec. Name Office Office hour Mail id Day III- A Dr. N. Angeline Little UB [email protected] (12.30- Flower 609A v.ac.in 2.15pm) Day 4- (10-40- 11.30 am) Required Text Books: 1. C. Brechignac, P. Houdy, M. Lahmani, “Nanomaterials and Nanochemistry”, Springer publication 2007. 2. Kenneth J. Klabunde, “Nanscale materials in chemistry”, Wiley Interscience Publications 2001 3. C. N. Rao, A. Muller, A. K. Cheetham ,“Nanomaterials chemistry”, Wiley-VCH 2007. Prerequisite : Nil Objectives : The purpose of this course is to provide an adequate knowledge on various Nanochemistry aspects Assessment Details: Cycle Test – I : 15 Marks Cycle Test – II : 25 Marks Surprise Test : 5 Marks Attendance : 5 Marks Department of Physics and Nanotechnology Program: II M. Tech. Nanotechnology Course file NT2113 CHEMISTRY OF NANOMATERIALS Table of Contents 1. Syllabus of NT2113 CHEMISTRY OF NANOMATERIALS 2. Academic course description 3. Notes of lesson Test Schedule S.No TEST PORTIONS DURATION . 1 Cycle Test-1 Session 1 to 15 2 Periods 2 Cycle Test-2 Session 16 to 45 3 Hrs. Outcomes Students who have successfully completed this course Instruction Objective To provide knowledge about chemistry based nanoprocess To design and conduct experiments relevant to nanochemistry, as well as to analyze the results To enhance the various nanosynthesis techniques and to identify and solve problems. To improve usage of chemistry for modern technology 1.
    [Show full text]
  • Ligand-Free Nanoparticles As Building Blocks For
    Includes Surfactants and Ligands for Nano Synthesis Ligand-free Nanoparticles as Building Blocks for Biomedicine and Catalysis by Stephan Barcikowski and Niko Bärsch Semiconductor Nanoparticles – A Review by Daniel Neß and Jan Niehaus Table of Contents Ligand-free Nanoparticles as Building Blocks for Biomedicine and Catalysis by Prof. Dr.-Ing. Stephan Barcikowski and Dr.-Ing. Niko Bärsch ....................................................1-8 Semiconductor Nanoparticles – A Review by Daniel Neß and Jan Niehaus ...................................................................................................9-16 Nanomaterials Sorted by Major Element ....................................................................................17-45 Nanomaterials – Surfactants and Ligands for Nano Synthesis........................................45-46 Nano Kits .......................................................................................................................................47-48 NEW Nanomaterials ...Coming Soon.... .............................................................................................49 Strem Chemicals, Inc., established in 1964, manufactures and markets a wide range of metals, inorganics and organometallics for research and development in the pharmaceutical, microelectronics, chemical and petrochemical industries as well as for academic and government institutions. Since 2004, Strem has manufactured a number of nanomaterials including clusters, colloids, particles, powders and magnetic fluids of a range
    [Show full text]