CV Sivarao.Pdf

PROFESSOR IR. DR. SIVARAO SUBRAMONIAN

DIRECTOR UTeM Commercialization Centre Universiti Teknikal Malaysia Melaka

Tel: 0166341481 / 063316869 Email: [email protected]

Sivarao Subramonian is currently the Director of UTeM Commercialization Centre, who directly in-charge of innovation, Intellectual properties, & Commercialization of UTeM technologies.

He has started his career in the year of 1991 as a Mechanical Engineering Lecturer at Politeknik Ungku Omar, which then progressed to Politeknik Shah Alam, and Politeknik Johor Bahru until he joined UTeM in 2003. In between the years, some industrial experiences have also been gained while being an M&E Consultant since year 1997 to date.

The primary role of his position and and interest is to commercialize the technologies/products established by UTeM researchers. Thus, industrial engagements are critically designed for action value proposition for high impact commercialization of readily available technologies.

Besides that, value creation of the established technologies are also carefully framed and protected by suitable intellectual properties. Those of which protected, are often taken ahead for innovation competitions which has won numerous prestigious medals globally.

Over the years, he has also commercialized two of his own technologies/solutions, besides had published more than 150 articles in indexed journals, proceedings and books. He is also owns 12 patents, more than 45 research grants (Industry, ministry, University) worth of more than RM 4.5 Million.

He has also won more than 30 innovation medals globally, while having been appointed as panel / jury member for more than 30 numerous & prestigious professional and official events including in Italy. He is also the editorial board member / reviewer for more than 20 international journals and conferences.

1 Proud to be…..

FACULTY OF MANUFACTURING ENGINEERING UNIVERSITI TEKNIKAL MALAYSIA MELAKA

CURRICULUM VITAE

PERSONAL INFORMATION

Affiliation : Prof. Ir. Dr. Sivarao Subramonian Faculty of Manufacturing Engineering Universiti Teknikal Malaysia Melaka 76100 Durian Tunggal, Melaka Malaysia

Position : Director UTeM Commercialization Centre (UCC)

Field of Interest : Engineering of New Technologies, Innovative Engineering, Advanced Machining, Advanced Materials Processing, Composite Matreials, Artificial Intelligence In Manufacturing, Process Modelling & Optimization

Telephone (h) : +06 3316869 / 6505 Nationality : Malaysian (hp) : +6016 634 1481 I/C No. : 680926-08-5709 e-mail : [email protected] Age : 47

QUALIFICATIONS

No. Academic Qualifications University/Institute Year Doctor of Philosophy, PhD. 1. Mech. & Mfg. Engineering Multimedia University, Hybrid Intelligence Modeling and Experimental Malaysia 2011 Validation of Advanced Machining

Masters Of Engineering Science, 2. MEng. MSc. (Mech. & Mfg.) Multimedia University, Quality and Performance Analysis of Advanced Cutting Malaysia 2006 Tools

Bachelor of Mechanical Engineering 3. B.Eng (Mech.) Universiti Teknologi Malaysia Design of Cooling System for Gas Turbine Blades 1997

WORKING EXPERIENCE Year Position Field of Work Place of Work 1989-1991 Engineering Assistant MPU Final Test Motorola, Sungei Way 1991-1997 Lecturer Mech. Eng. Dept Ungku Omar Polytechnic 1997-2003 Lecturer Mech. Eng. Dept Johor Bahru Polytechnic 1997-Current M&E Consultant Professional Consultant Hi-Tech M&E Consultant 2003-2006 Teaching Engineer 2011-2006 Lecturer Manufacturing Engg. Faculty 2006-Current Associate Professor Universiti Teknikal Malysia Centre for Research & Melaka (UTeM) 2013-2015 Deputy Director Innovation Management UTeM Commercialization 2015-Current Director Centre (UCC) 2 PROFESIONAL MEMBERSHIP

Membership No. Professional Bodies Number 1 Professional Engineer (Mechanical), Board of Engineers, Malaysia 13971 2 Senior Member, Academy of Malaysian SMEs, S.M.A.M.S 0850 3 Member, The Institute of Engineers Malaysia, MIEM 30616 4 Member, Malaysian Invention and Design Society 1756/07 5 Member, International Association of Engineers, UK 62051 6 Member, Board of Engineers, Malaysia LJM34446R

AWARDS RECEIVED

1) Best Innovation & Commercialization Award in conjunction with Prestigious University Academic Award Ceremony, year 2014 (Anugerah Inovasi & Pengkomersilan sempena Anugerah Akademik Universiti Teknikal Malaysia Melaka tahun 2014)

2) Research Award Runner-Up Award in conjunction with Prestigious University Academic Award Ceremony, year 2014 (AnugerahPenyelidikan sempena Anugerah Akademik Universiti Teknikal Malaysia Melaka tahun 2014)

3) Meritorious Service Award of Allegiance Over 20 Years, awarded in 2014 (Anugerah Jasa Bakti Perkhidmatan Taat Setia Melebihi 20 Tahun yang dianugerahkan pada tahun 2014)

4) Best Research Award in conjunction with prestigious University Academic Award Ceremony, Year 2010 (Anugerah Penyelidikan sempena Anugerah Akademik Universiti Teknikal Malaysia Melaka Tahun 2010)

5) Distinguished Service Award, Universiti Teknikal Malaysia Melaka, year 2007 (Anugerah Perkhidmatan Cemerlang, Universiti Teknikal Malaysia Melaka, Tahun 2007)

INTELLECTUAL PROPERTIES

Patent Granted

1) Granted Patent : Electro Mechanical Locking System Granted Number : MY-153050-A (December 2014) PI Number : PI 2010003765

Patent Filed

1) Filed Patent : Electrochemical Capacitor And A Method Of Growing Vertically Aligned Carbon Nanotube On Conducting Substrate Of Electrodes PI Number : PI 2015703500

2) Filed Patent : Bio-Based Hybrid Nano Compositions For Sealing Pneumatic Inflated Mediums PI Number : PI 2015703853

3) Filed Patent : A method of Fabricating recycled carbon fibre composite moulded article PI Number : PI 2015702294

4) Filed Patent : Rapid Hot Marking Tool PI Number : PI 2015702286

5) Filed Patent : Multiplex Welding Electrode Holder System PI Number : PI 2014703865

3 6) Filed Patent : A Plastic wall Tile And Method Of Manufacturing Thereof PI Number : PI 2014703490

7) Filed Patent : Tyre Pressure Sustaining system (T-PreSS) PI Number : PI 2012002728

8) Filed Patent : Super Fast Keyless Grill Locking System PI Number : PI 2012002778

9) Filed Patent : Automatic Tyre Inflating System (ATIS) PI Number : PI 2012002727

10) Filed Patent : Magnetic Airless Tyre (MAT) PI Number : PI 2012701282

11) Filed Patent : Hydro-gas Airless Tyre (HAT) PI Number : PI 2012701286

12) Filed Patent : Traffic Light Electrical and Mechanical Fault Alert System PI Number : PI 2010005339

13) Filed Patent : Distribution Board Alert System PI Number : PI 2010005310

14) Filed Patent : Automatic Tyre Pressure Controller (ATPC) PI Number : PI 2009003255

Trademark

1) Filed Trademark: Pre-Setable Attendant Request Terminal (PART) PI Number : 2013014769

1) Filed Copyright : Pre-Settable Attendant Request Terminal (PART) PI Number : LY2013001027 / CRLY00000769

2) Filed Copyright : Vehicle Smart security (VESS) PI Number : LY2013001025 / CRLY00000767

RESEARCH GRANT (MINISTRY / INDUSTRY)

No. Start End Research Title Status Development and Design of Mobile Shaft Alignment Solution System. (Fundamental Research Grant Scheme) 1 01/10/2007 30/09/2009 Completed Project Number : FRGS/2007/FKP (10) - F00035

Feasibility Study of Implementation and Management of Rapid Manufacturing in Malaysia automotive Industry. 2 01/10/2007 30/09/2009 (Fundamental Research Grant Scheme) Completed Project Number : FRGS/2007/FKP (13) - F00038

Study Of Non Linear Thermal Expansion Model For Aluminium Silicon Carbide Using Dynamic Programming In Designing Of Production Tooling By Casting 3 01/09/2010 29/08/2012 Techniques Completed Project Number: FRGS/2010/FKP/TK03/6-F00104 (Fundamental Research Grant Scheme)

4 An Alternative Approach In Synthesizing of Micro Laser Lathing for 3D Circular Stock 4 01/03/2010 28/02/2012 Project Number : FRGS/2010/FKP/TK02/3 – F0084 Completed (Fundamental Research Grant Scheme)

Investigation of Transition Metal Nickel Chalcogenide Thin Films (XiX2) Being Photoelectrochemical/solar Cell Materials 5 01/12/2011 30/11/2013 Completed Project Number: FRGS/2011/FKP/TK02/1 F00120 (Fundamental Research Grant Scheme)

OneBAJA–Next Generation Green and Economical Urea(Green Processing : Biodegradable Urea Granules) 6 01/10/2011 30/09/2016 Project Number : LRGS/2011/FKP/TK02/1 – completed R00001(Long Term Research Grant Scheme)

Ground Vehicle For Fire Fighting Purpose In Hazardous Environment 7 15/07/2012 14/06/2014 Project Number : PRGS/2012/TK01/FKM/02/1/T00004 Completed (Prototyping Research Grant Scheme)

New Product Development Through Concurrent Engineering Concept 8 01/07/2012 30/06/2014 Project Number : GLuar/2012/FKP(2)/G00011 Completed (Knowledge Transfer Program)

A Novel Study On The Effects Of Cutter Geometrical Feature In Component Failure For Machining Thin-Wall Low Rigidity Structural Component 9 01/05/2012 30/04/2014 Completed Project Number : FRGS/2012/FKP/TK01/03/2/F00134 (Fundamental Research Grant Scheme)

Mechanism of Energy Regenerative Suspension System For Ground Vehicle Application 10 01/07/2012 30/06/2014 Project Number : ERGS/2012/FKM/TK08/02/1/E00007 Completed (Exploratory Research Grant Scheme)

Super Energy Saving Locking System Project Number : GLuar/2012/FKP(1)/G00010 11 14/10/2012 13/09/2014 Completed (Knowledge Transfer Program)

Prototyping Full Scale Pressure Leak Replenishing System For Automobile Tyre Application Towards Saving Life, Environment & Energy 12 15/07/2012 14/06/2014 Completed Project Number : PRGS/2012/TK01/FKP/02/1/T0003 (Prototyping Research Grant Scheme)

Silicon Surface Characteristics to Interact with CO2 Laser For Micromachining 13 09/05/2012 08/05/2014 Project Number :FRGS (MMU) EP20120521007 (MMU) Completed (Fundamental Research Grant Scheme)

Implementation of Smart Eye for Visually Impaired Person Project Number :Gluar/2013/FKE(1)/G00018 (Knowledge 14 30/07/2013 29/06/2015 Completed Transfer Program)

Energy-Free Keyless Grill Locking System Project Number :Gluar/2013/FKP(1)/G00019 (Knowledge 15 30/07/2013 29/06/2015 Completed Transfer Program)

5 Investigation On The Mechanical Properties of Novel Oil Palm Fibre Reinforced-Metal Laminate System 16 30/07/2013 29/06/2015 ERGS/2013/FKM/TK01/UTEM/02/07/E00018 (Exploratory Completed Research Grant Scheme)

Synthesizing Novel Nano-Structured Flowable Composite Sealant – For Automotive Tyre Application 17 01/05/2013 30/05/2015 Project Number :FRGS/2013/FKP/TK01/03/1/F00156 Completed (Fundamental Research Grant Scheme)

Fabrication And Physico-Mechanical Analysis Of New Natural Rubber Foam Filled Waste Spent Tea Leave Composite For Sound absorption 18 01/07/2014 31/06/2016 On-Going Project Number: FRGS/1/2014/TK04/FKP/01/F00205 (Fundamental Research Grant Scheme)

An Integrated Active Vehicle Seat System For Stress Free Travel (SEAT) 19 1/08/2014 31/06/2016 Project Number: PRGS/1/2014/TK01/FKM/02/T00008 On-Going (Prototyping Research Grant Scheme)

A New Approach of Flow Visualization Technique Using Slanted Glass To Enhance Plastic Part Quality 20 01/07/2014 31/06/2016 Project Number: FRGS/1/2014/TK01/FKP/02/F00224 On-Going (Fundamental Research Grant Scheme)

Full Scale Prototyping of „Centralised Modular Wireless maintenance Alert System (Wi-MAS2)‟ Towards Providing Solution For Critical Maintenance Problems faced By 21 01/08/2014 31/07/2016 Manufacturing Industries On-Going Project Number: PRGS/1/2014/TK01/FKP/02/T00007 (Prototyping Research Grant Scheme)

RESEARCH GRANT (UNIVERSITY & NETWORK)

No. Start End Research Title Status Modular Preventive Maintenance Alert System Project Number : PJP/2013/FKP/Prototype/ISO1290 1 01/01/2014 01/01/2015 Completed (UTeM - Short Term Research Grant Scheme)

Stamp Forming Performance of Palm Fiber Composites Project Number: PJP/2012/FKM(41A)/S010145 2 01/06/2012 13/11/2013 Completed (UTeM – Short Term Research Grant Scheme)

E-Preventive Maintenance Warning System Project Number: PJP/2012/FKP(9C)/S01012 3 01/06/2012 13/11/2013 Completed (UTeM – Short Term Research Grant Scheme)

The Measurement And Validation Of Wireless Sensor Energy Harvesting System 4 14/10/2012 13/09/2014 Project Number: PJP/2012/CeTRI/Y0001 Completed (UTeM – Short Term Research Grant Scheme)

Precision Machining of Boiler Plate By Laser Technology Project Number : PJP/2011/FKP (6C) S00873 5 01/03/2011 29/02/2012 Completed (UTeM – Short Term Research Grant Scheme)

6 Design of An Organic Battery For Residential Purpose Using Design For Sustainability Methodology and Rapid Prototyping 6 01/03/2011 29/02/2012 completed Project Number : PJP/2011/FKP (14A) S00881 (UTeM – Short Term Research Grant Scheme)

Multiple Method Switching System For Domestic and Industrial Electrical appliances 7 01/03/2011 29/02/2012 Project Number : PJP/2011/FKEKK (19C) S00853 Completed (UTeM – Short Term Research Grant Scheme)

Design A Prototype Solar Powered Lake Cruiser Project Number : PJP/2011/FKP (8A) S00875 8 01/03/2011 29/02/2012 Completed (UTeM – Short Term Research Grant Scheme)

Implementation of New Current Detection Techniques For Distribution Board Monitoring system 9 01/03/2011 29/02/2012 Project Number : PJP/2011/FKEKK (11C) S00845 Completed (UTeM – Short Term Research Grant Scheme)

Prototyping Solar Powered „Green Bus Stop‟ Project Number: PJP/2010/FKM (15A) S715 10 01/04/2010 31/03/2011 Completed (UTeM – Short Term Research Grant Scheme)

Design and Development of Circular Work Clamping system For Non-Contact Machining Application 11 01/03/2010 28/02/2011 Project Number: PJP/2010/FKP (11A) S669 Completed (UTeM – Short Term Research Grant Scheme)

Design and Analysis of car Heat Remover Based on Design for Sustainability Using Rapid Prototyping 12 01/03/2009 31/03/2010 Project Number: PJP/2010/FKP (4A) S662 Completed (UTeM – Short Term Research Grant Scheme)

Engineering of Mechanical Control Kit For Unmanned Grass Cutter 13 01/03/2009 31/03/2010 Project Number :PJP/2009/FKP (8A)–S536 Completed (UTeM – Short Term Research Grant Scheme)

Synthesis and Characterization of Transition Metal Chalcogenide Thin 14 01/09/2009 31/08/2010 Project Number: PJP/2009/FKP (18A) S608 Completed (UTeM – Short Term Research Grant Scheme)

Improve The Mechanical Properties of Intermetallic Aluminides for Automotive 15 01/10/2009 30/09/2010 Project Number : PJP/2009/FKP (23A) S628 Completed (UTeM – Short Term Research Grant Scheme)

Design and Development of Non-Traditional Power Train System 16 01/10/2007 30/09/2008 Project Number :PJP/2007/FKP (26)–S374 Completed (UTeM – Short Term Research Grant Scheme)

Advanced Machining of Industrial Graphite Electrodes Project Number :PJP/2007/FKP/ (25)–S373 17 01/10/2007 30/09/2008 Completed (UTeM – Short Term Research Grant Scheme)

Design and Development of Super Saving and Comfort Home Cooling System : 18 30/09/2008 Project Number :PJP/2007/FKP (27)–S375 Completed 01/10/2007 (UTeM – Short Term Research Grant Scheme)

7 Quality and Performance Analysis of Laser Machining Project Number :PJP/2007/FKP/ (24)–S372 19 01/10/2007 30/09/2008 Completed (UTeM – Short Term Research Grant Scheme)

Design and Development of an Automobile Brake Lining Monitoring System 20 01/05/2006 30/04/2007 Project Number : PJP/2006/FKP (3)–S183 Completed (UTeM – Short Term Research Grant Scheme)

Investigation of Rolled Steel Plate Machinibility and Process Optimization 21 01/05/2006 30/04/2007 Project Number : PJP/2006/FKP (4)–S184 Completed (UTeM – Short Term Research Grant Scheme)

Experimental Investigation of Burr Formation in Drilling Project Number : PJP/2005/FKP/ (20)–S157 22 01/11/2005 31/05/2006 Completed (UTeM – Short Term Research Grant Scheme)

Investigation of Laser Performance Project Number :PJP/2005/FKP/ (12)–S149 23 01/11/2005 31/05/2006 Completed (UTeM – Short Term Research Grant Scheme)

PUBLICATIONS

Book & Chapters

1) Sivarao, Yilbas, “Thermal Modeling of Laser Machining Process”. In Comprehensive Materials Processing, Vol. 9, pp. 203–217; Elsevier Ltd., 2014, ISBN: 978-008-096-532-1

2) Sivarao, Peter Brevern, N.S.M. El-Tayeb, V.C.Vengkatesh, “Neural Network Multi-Layer Perceptron Modeling for Surface Quality Prediction in Laser Machining”. In Application in Machine Learning, 51-61, In- Tech Publication-Austria, 2009. ISBN No.: 978-953-307-035-3

3) Sivarao, “Tire Inflation Technology; Existing and Evolution To Be – Advancements in tyre inflating technology”, LA Publishing, Germany, 2010, ISBN. 978-3-8383-8502-0

4) Sivarao,“Modeling of Laser Materials Processing by Artificial Neural Network Modeling and Experimental Validation”, VDM Publishing, Mauritius, 2010, ISBN. 978-3-639-31529-5

5) Sivarao, “Design and Development of Unmanned Grass Cutter”, LA Publishing, Germany, 2010, ISBN. 978- 3-8433-5267-3

6) Sivarao, “Quality and Performance Analysis of CO2 Laser machining - A Complete Guide For Laser Machining Experimentation and Cut-Edge Quality Evaluation”, LA Publishing, Germany, 2010, ISBN. 978-3- 8433-8162-8

7) Sivarao, T.J.S. Anand, Warikh, “Characterization Of Calcium Carbonate Particulated Polyethylene”, LA Publishing, Germany, 2010, ISBN 978-3-8433-8630-2

8) Sivarao. S, M.S. Shukor, T.J.S. Anand, S. Syamimi, Haeryip Sihombing, “A Compilation Of Various Research In Manufacturing Engineering Part 1”,Penerbit UniversitiTeknikal Malaysia Melaka, Malaysia, 2011, ISBN. 978-967-0257-01-3

8 Journals

1) Sivaraos, S.T.Leong, Y.Yusof, C.F.Tan, “An Experimental and Numerical Investigation of Tensile Properties of Stone wool Fiber Reinforced Polymer Composites”, Advanced Materials Letters, Vol. 6(10), pp.888-894, (2015) ISI & Scopus Indexed.

2) Sivaraos, Mohd Shahir Kasim, Mohd Amran Md Ali, Raja Izamshah Raja Abdullah, T Joseph Sahaya Anand, “Micro-drilling of silicon wafer by industrial CO2 Laser”, International Journal of Mechanical and Materials Engineering. Vol. 10 (2), pp. 1-6, (2015). ISI Indexed

3) Sivaraos, D.Ainol, M.J.Raguvaran, M. Shajahan, K. Kadirgama, M.A.Lajis “Design Of A Novel Pressure Replenishing System To Sustain Automobile Tyre Pressure Without Human Intervention”, International Journal of Applied Engineering Research Vol. 10 (10), pp. 26295-26306 (2015). Scopus Indexed

4) Sivaraos, M. J. Raguvaran, A. S. Dahlan, K. Kadirgama and M. A. Amran, “Air Permeability Investigation Towards Automotive Tyre Pressure Sustainability And Life Saving”, ARPN Journal of Engineering and Applied Sciences. Vol. 10 (10) pp. 4404-4412, (2015) Scopus Indexed

5) T. Joseph Sahaya Anand,, Mohd Asyadi Azam, Sivaraos, Zolkepli Buang, Rajes K.M. Rajan, Nurul Hazliza, Mohd Zaidan and Chua Kok Yau, "HRTEM Analysis of Magnetron Sputtered Ni4Al Thin Films", Applied Mechanics and Materials. Vol. 761 pp 504-509, (2015). ISI Indexed

6) T. C. Yap, Sivaraos, C. S. Lim, J.W. Leau, "Surface Roughness and Cutting Forces in Cryogenic Turning of Carbon Steel", Journal of Engineering Science and Technology Vol. 10 (7) pp. 911-920, (2015). ISI indexed

7) Sivaraos, Mohd Shahir Kasim, Mohd Amran Md Ali, Raja Izamshah Raja Abdullah and T Joseph Sahaya Anand, "Micro - drilling of silicon wafer by industrial CO2 laser", International Journal of Mechanical and Material Engineering Vol. 10 (2) pp. 1 - 6, (2015). Scopus Indexed

8) Law Mei Lin, Qumrul Ahsan, Hairul Effendy Ab Maulod, Noraiham Mohamad and Sivaraos, "Wear Behaviour of Cryogenic Treated Recycled Carbon Fibers Filled Epoxy Composite", Applied Mechanics and Materials Vol. 761, pp. 489-493, (2015).

9) Raja Izamshah Raja Abdullah, Aaron Yu Long, Mohd Amran Md Ali, Mohd Shahir Kasim, Mohd Hadzley Abu Bakar and Sivaraos, "Optimisation of Machining Parameters for Milling Polyetheretherketones (PEEK) Biomaterial", Applied Mechanics and Materials Vol. 699 pp 198-203, (2015).

10) R. Izamshah, N. Husna, M. Hadzley, M. Amran, M.S. Kasim and Sivaraos, "Optimization of Cutter Geometry Features to Minimise Cutting Force on Machining Polyetheretherketone (PEEK) Engineering Plastic", Applied Mechanics and Materials Vol. 761 pp 282-286, (2015).

11) Rosfadzlin Hanna Z.A., Taufik, Sivaraos, Mohd Ghazali S.,Rosidah J. and Mohd Amran M. A., "Design Simulation on Fatigue Life of Fiber Reinforced Polymer Composites", Applied Mechanics and Materials Vol. 761 pp 47-51, (2015).

12) Rostam,O., M.F. Dimin, Sivaraos, H.H.Luqman, M.R. Said, Lau Kok Keong, Norazlina M.Y., Norhidayah.M and A. Shaaban, "Assessing the Significance of Rate and Time Pulse Spraying in Top Spray Granulation of Urea Fertilizer Using Taguchi Method", Applied Mechanics and Materials Vol. 761 pp 308-312, (2015).

13) Nur Fadzila Hussain, D.Sivakumar, Mohd Ahadlin Bin Daud,Sivaraos and Mohd Zulkefli Selamat, "Study of Interfacial Shear of aluminium/oil palm empty fruit bunch fiber reinforced polypropylene fiber metal laminates", Applied Mechanics and Materials Vol. 789-790 pp 131-135, (2015).

14) Sivakumar DharMalingam, Muhammad 'Ammar Bin Che Mahzan, Md Radzai Bin Said, Ahmad Rivai, Mohd Nur Azmi Bin Nordin, Mohd Zulkefli Bin Selamat, Sivaraos, "V-Bend Die Forming Performance of Oil Palm Fiber Composite", Applied Mechanics and Materials Vol. 699 pp 59-63, (2015).

15) Sivakumar DharMalingam, Muhammad Hilmi Ruzaini Bin Hashim, Md Radzai Bin Said, Ahmad Rivai, Mohd Ahadlin Bin Daud, Sivaraos, and Muhammad 'Ammar Bin Che Mahzan, "Effect of Reprocessing Palm Fiber Composite on the Mechanical Properties", Applied Mechanics and Materials Vol. 699 pp 146-150, (2015).

9 16) M.J. Raguvaran, Sivaraos, M.A. Amran, T.J.S. Anand, Qumrul, R. Izamshah and A.S. Dahlan, "Way Forward to Halt Pressure Loss in Automotive Tyres", Applied Mechanics and Materials Vol. 761 pp 510-514, (2015).

17) Sivarao, Dimin M.F., Faris N.M.F., A. Hambali, S. Dhar Malingam and Sapuan S.M., "Analytical Hierarchy Process for Design Selection of Micro Hot-Marking Tool", Applied Mechanics and Materials Vol. 699 pp 897- 902, (2015).

18) Taufik Roni Sahroni, Yong Sze Yeau, W. Sapto Widodo, Baharudin Abu Bakar, Sivaraos, Mohd Amran Md Alif, Mohd Shahir Kasim, "Fatigue Life Analysis of High Performance Motorcycle Disc Brake", Applied Mechanics and Materials Vol. 699 pp 354-359, (2015).

19) Sivarao, Mallisi, Aidy Ali, and L.S. Teng, " Enhanced Tensile Propertise of Stone Wool Fibre- Reinforced High Density Polyethylene (HDPE) Composite", Material Testing. Vol. 56 Edition 2 pp. 150-154, (2014).

20) M. Amran, H. Hilmib, S. Salmahc, Z. Abdullahd, E. Mohamade, L. P. Junf and Sivaraos, “Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/Binder using Full Factorial Method”, Journal of Advanced Research in Materials Science, Vol. 1, No.1. pp. 7-13, (2014), ISSN (online): 2289-7992 (DOAJ Indexed).

21) Sivaraos, K.R.Milkey, A.R.Samsudin, A.K.Dubey, P.Kidd, "Comparison between Taguchi Method and Response Surface Methodology (RSM) in Modelling CO2 Laser Machining", Jordan Journal of Mechanical and Industrial Engineering. Vol. 8 (1), pp. 35-42, (2014). ISSN 1995-6665 (Scopus & ISI Indexed)

22) Sivaraos, Si Qing Lim, A.R. Samsudin, Y. Yusof, Nona Merry M. Mitan, Amran, "AHP Based Decision- Making in Concept Selection of Keyless Grill Locking System", International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS. Vol. 14 (5), pp. 1-8, (2014). ISSN 2227-2771 (Scopus Indexed)

23) S. Subramonian, Md. Radzai Said, O. Rostam, M. Hafiz, "Top Spray Fluidized Bed Granulated Paddy Urea Fertilizer", Applied Mechanics and Materials. Vol. 606, pp. 137-140, (2014). ISSN 16609336 (Scopus Indexed)

24) Mohd Amran, Siti Salmah, Mohd Zaki, Raja Izamshah, Mohd Hadzley, Sivarao Subramonian, Mohd Shahir, Mohd Amri, "The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine", Applied Mechanics and Materials. Vol. 529, pp. 61-66, (2014). ISSN 16609336 (Scopus Indexed)

25) Sivakumar DharMalingam, Sivaraos, Mohd Zulkefli Bin Selamat, Md Radzai Bin Said, Shankar Kalyanasundaram, "Effects of Process Parameters during Forming of Glass Reinforced-pp based Sandwich Structure", Advances in Environmental Biology. Vol. 8 (8), pp. 3143-3150 (2014). ISSN 1995-0756 (Scopus & ISI Indexed)

26) Muhammad 'Ammar Bin Che Mahzan, Sivakumar Dhar Malingam, Sivaraos, Mohd Zulkefli Bin Selamat, Md Radzai Bin Said, "A Study on the Mechanical and Forming Performance of Oil Palm Fiber Reinforced Polypropylene Composite", American-Eurasian Journal of Sustainable Agriculture. Vol. 8 (4), pp. 141-147 (2014). ISSN 1995-0748 (Scopus Indexed)

27) R. Izamshah, M. Zulhairy, M. Shahir, M. Hadzley,M. Amran, M. Amri and Sivarao, "Cutter Path Strategies for Shoulder Milling of Thin Deflecting Walls", Advanced Materials Research. Vol. 903, pp. 175-180, (2014). ISSN 10226680 (Scopus Indexed)

28) O. Rostam, Sivaraos, RadzaiMd Said, "Temperature effects on urea granules process to produce paddy fertilizer using top spray fluidized bed granulator", International Journal of Enhanced Research in Science Technology & Engineering. Vol. 3 (2), pp. 232-236, (2014). ISSN 2319-7463 (DOAJ Indexed)

29) Mohd Hadzley, A.B., Nurul Fatin, M.R., Raja Izamshah, R.A., Hussein, N.I.S., Siti Sarah, A., Sivaraos., "Surface Integrity of a High Speed Milling FC300 Gray Cast Iron", Applied Mechanics and Materials. Vol. 465-466, pp.642 - 646, (2014). ISSN 1660-9336 (Scopus Indexed)

30) Sivaraos, Qumrul, T.C. Yap, M.A. Amran, T.J.S Anand, R. Izamshah, A.A. Aziz, " Friction Performance Analysis of Waste Tyre Rubber Powder Reinforced Polypropylene Using Pin-On-Disk Tribometer", Procedia Engineering. Vol. 68 pp. 743-749, (2013).

10 31) M.A. Amran, S. Salmah, N.I.S. Hussein, R. Izamshah, M. Hadzley, Sivaraos, M.S. Kasim, M.A. Sulaiman, " Effects of machine parameters on surface roughness using response surface method in drilling process. Procedia Engineering. Vol. 68 pp. 24-49, (2013).

32) Sivaraos, Samsudin, A.R., Tin, S.L., Kassim, A.M., Taufik, Amran, M.A., "Programmable Automatic Service Time Reminder (PAST-R) To Overcome Traditional Maintenance Approach", Australian Journal of Basic and Applied Sciences. Vol. 7(11), pp.206 - 212, (2013). ISSN 1991-8178 (Scopus & ISI Indexed)

33) Sivaraos, Aziz, A.A., Izamshah, R., Taufik, Hambali, A., "Finite Element Analysis of Super Energy Saving Locking System Towards Enhancing Door Lock Performance and Security", International Review of Mechanical Engineering. Vol. 7(6), pp.1147 - 1151, (2013). ISSN 1970-8734 (Scopus Indexed)

34) Sivarao, S., Milkey, K.R., Samsudin, A.R., Dubey, A.K., Kidd, P., "RSM Modelling and Optimization of CO2 Laser Machining of Industrial PVC Foam", International Review of Modelling and Simulations. Vol. 6(4), pp.1339 - 1343, (2013). ISSN 1974-9821 (Scopus Indexed).

35) Sivaraos, Milkey, K.R., Samsudin, A.R., Dubey, A.K., Kidd, P., "Taguchi Modeling and Optimization of Laser Processing In Machining of Substantial Industrial PVC Foam", International Journal of Applied Engineering Research. Vol. 8(12), pp.1415 - 1426, (2013). ISSN 0973-4562 (Scopus Indexed)

36) Sivaraos, Kumar, N., Ali, A., Taufik, Dharmalingam, S., Kassim, M.S., Sulaiman, M.A., "Heat Exchanger Analysis to Reduce Hexane Loss in Palm Kernel Oil Extraction Plant", International Journal of Mechanical & Mechatronics Engineering. Vol. 13(4), pp.29 - 33, (2013). ISSN 2077-124X (Scopus Indexed)

37) Tan, C.F., Liew, S.M., Alkahari, M.R., Ranjit, S.S.S., Said, M.R., Chen, W., Rauterberg, G.W.M., Sivakumar, D., and Sivarao, "Fire Fighting Mobile Robot: State of the Art and Recent Development", Australian Journal of Basic and Applied Sciences. Vol. 7(10), pp.220 - 230, (2013). ISSN 1991-8178 (Scopus-Q3 & ISI Indexed).

38) Tan, C.F., Tean, Z.Y., Tan, B.L., Lim, T.L., Said, M.R., Sudin, M.N., Khalil, S.N., Karjanto, J., Yusof, N.M., Chen, W., Rauterberg, G.W.M., Sivarao, "Conceptual Design of Cantilever Support for Long Haul Bus Passenger Seat", Australian Journal of Basic and Applied Sciences. Vol. 7(9), pp.383 - 387, (2013). ISSN 1991-8178 (Scopus & ISI Indexed).

39) Kassim, A.M., Yasuno, T., Sivaraos, Jaafar H.I., "Brake Motion Control for Quadruped Hopping Robot by Using Reference Height Control System", International Review of Mechanical Engineering. Vol. 7(6), pp.1164 - 1170, (2013). ISSN 1970-8734 (Scopus Indexed).

40) Anand, T.J.S., Ganesh, K.K., Sivaraos, "Mechanical Properties of Intermetallic Nickel Aluminides (Ni3Al)", Far East Journal of Electronics and Communications. Vol. 11(1), pp.47 - 56, (2013). ISSN 0973-7006 (Scopus Indexed).

41) Raja Izamshah, Yuhazri M. Y., M. Hadzley, M. Amran, Sivarao Subramonian, "Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component", Applied Mechanics and Materials Vol. 315 (2013) pp. 773-777 (Scopus & ISI Indexed)

42) Sivarao, S. Thiru, Kamaruzaman Jusoff, Azizah Saaban, Mariana Yusoff, Zanariah Jano, Yuhazri Yaakub, Hasoalan, Mohd Hadzley, IzamShah, Nur Izan, Mohd Amran, Taufik, Wahyono Sapto, C.F. Tan, D. Sivakumar, "Modelling of CO2 Laser Materials Processing by Networked Neuro-Dimension Fuzzy Intelligent System", Australian Journal of Basic and Applied Sciences, 7(3): 35-45, (2013). ISSN 1991-8178 (Scopus & ISI Indexed)

43) Sivarao, Subramonian, S. Thiru, Chitrambalam, T. Joseph Sahaya Anand, Mariana, Yusof, "Establishing a Hybrid Laser Lathing Technology", World Applied Sciences Journal, 21. pp. 53-59. (2013). ISSN 1818-4952 (Scopus Indexed)

44) T. Joseph Sahaya Anand, S. Shariza, Z. M. Rosli, Azizah Shaaban, S. Sivarao, Mohamad Radzai Said, S. Thiru "Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route", World Applied Sciences Journal, 21. pp. 60-67. (2013). ISSN 1818-4952 (Scopus Indexed)

45) Abu Bakar Mohd Hadzley, Raja Abdullah Raja Izamshah, Md. Ali Mohd Amran, Jusoff Kamaruzzaman, Subramoniam Sivarao, Ariff Hambali, Hussein Nur Izan Syahriah, Wan Mahmood Wan Hassrulnizzam, Abdullah Abu, Yusoff Marianna, Shamshiri Meysam, "Machining Performance of Ti-6Al-4V Titanium Alloy

11 Assisted by High Pressure Waterjet", World Applied Sciences Journal, 21. pp. 98-104. (2013). ISSN 1818- 4952 (Scopus Indexed)

46) Hambali Arif, Mohamad Shahrul Effendy Kosnan, Kamaruzaman Jusoff, Wahyono Sapto, T. Joseph Sahaya Anand, Taufik, Sivarao, Mohd Hadzley Abu Bakar, "Finite Element Analysis of Conceptual Lumbar Spine for Different Lifting Position", World Applied Sciences Journal, 21. pp. 68-75. (2013). ISSN 1818-4952 (Scopus Indexed)

47) Wan Hasrulnizzam Wan Mahmood, Mohd Nizam Ab Rahman, Baba Md Deros, Kamaruzaman Jusoff, Adi Saptari, Zuhriah Ebrahim, Al Amin Mohamed Sultan, Mohd Hadzley Abu Bakar, Sivarao Subramonian, Zanariah Jano, "Manufacturing Performance in Green Supply Chain Management", World Applied Sciences Journal 21(Special Issue of Engineering and Technology): 76-84, (2013). ISSN 1818-4952 (Scopus Indexed)

48) Sivarao Subramonian, Nanthakumar Rajoo, Widodo W. Sapto, Haeryip Sihombing, "Hexane Economization In Palm Kernel Oil Plant: A Study After Process Design Improvement", Global Engineers & Technologists Review, 2 (12). pp. 7-14. (2012). ISSN 2231-9700 (DOAJ Indexed)

49) Sivarao, Samsudin. A.R, Tin S.L, Hasoalan, Taufik, Yuhazry, Abdul Alif, Robert K.M, Sivakumar, C.F. Tan., "Promising Techniques Of Automotive Engine Lubrication Oil Monitoring System - A Critical Review Towards Enhancement", The International Journal of Engineering And Science (IJES), Volume 1, Issue 2 (2012), pp. 228-233. (ISSN: 2319 - 1813, ISBN: 2319 - 1805). (DOAJ Indexed)

50) Taufik, R.S, Hirmanto, S., Sivarao, Hambali, A., and Tajul, A.A, "Design of Jigs and Fixtures for Hydraulic Press Machine",Malikussaleh Industrial Engineering Journal Vol. 1, No.1 (2012), pp. 19-24. ISSN 2301- 934X (DOAJ Indexed)

51) Sivarao, Abdul Alif, Taufik, Yuhazri, Haery Ian, Robert K. M., Tin S. L., "Critical Review of Electro- Mechanical Door Locking System and Proposal Towards Development of Innovative Super Energy Saving Door Locking System", International Journal of Engineering and Innovative Technology (IJEIT), Volume 2, Issue 5, (2012), pp. 201-207. ISSN: 2277-3754 (DOAJ Indexed)

52) Sivarao, Robert K. M., Sivakumar D., Taufik, Yuhazri, C.F.Tan, Haery Ian, Alif, Tin S. L., "An Exploratory Study - Critical Laser Processing of Composite Materials", International Journal of Engineering Research & Technology (IJERT), Vol. 1, Issue 10, (2012), pp 1-8. ISSN: 2278-0181 (DOAJ Indexed)

53) Taufik, R.S., Tan, S.T., Hambali, A., Tajul, A.A.,Sivarao, "Design Optimization of Multi Vacuum Manifold for Semiconductor Industry", Malikussaleh Industrial Engineering Journal Vol. 1, No.1 (2012), pp. 5-10. ISSN 2301-934X. (DOAJ Indexed)

54) S.R. Subramonian, A.Z. Khalim, Hussein, N. I. S, R. Izamshah, M. Amran and M. Hadzley, "Transforming Linear Laser Cutting machine Into Laser Lathing - An Empirical Investigation & Evaluation of Roundness Quality", Journal of Current Engineering Research (JCER), Vol. 2, Issue 2 (2012), pp. 98-104. ISSN 2250- 2637 (DOAJ Indexed)

55) S.R. Subramonian, A.Z. Khalim, R. Izamshah, M. Amran, Hussein N. I. S, M. Hadzley, "Taper Quality Evaluation Of A Laser Lathed Steel Rod Using Modified Flatbed CO2 Laser Cutting Machine", International Journal of Current Research and Review (IJCRR), Vol. 4, Issue 15 (2012), pp. 81-91. ISSN 0975-5241 (DOAJ Indexed)

56) Sivarao, Mohd Rizal Salleh, Kamely A, TajulA, Taufik, "Mechanical Properties Modification of Polyethylene (PE) For CaCO3 Particulated Composites", Advanced Materials Research, Vol. 264-265 (2011), pp. 880- 887. ISSN 1022-6680. (Scopus, Q4 & IF, 0.14)

57) Sivarao, Mohd Rizal Salleh, Kamely A, Tajul. A, Taufik, "Characterizing Chicken Eggshell Reinforced Polypropylene (PP)", Advanced Materials Research, Vol.264-265 (2011), pp. 871-879. ISSN 1022-6680. (Scopus, Q4 & IF, 0.14)

58) Taufik, S. Sulaiman, T.A. Abdullah, Sivarao, "Design and Simulation on Compressor Metal Matrix Composite By Investment Casting", Advanced Materials Research, Vol.264-265 (2011), pp. 403-408. ISSN 1022-6680. (Scopus, Q4 & IF, 0.14)

59) Taufik, S. Sulaiman, T.A. Abdullah, Sivarao,"Design and Simulation on Cast Metal Matrix Composite By Investment Casting", Advanced Materials Research, Vol.264-265 (2011), pp. 323-328. ISSN 1022-6680. (Scopus, Q4 & IF, 0.14) 12

60) K. Ganesh Kumar, Sivarao, T. Joseph Sahaya Anand, "A Novel Intermetallic Nickel Aluminide (Ni3Al) as an Alternative Automotive Body Material", International Journal of Engineering & Technology IJET-IJENS, Vol. 11 No. 01, (2011) pp. 274 - 282 (DOAJ Indexed).

61) Mohd Afzanizam Mohd Rosli, Mohd Zaid Akop, Muhd Ridzuan Mansor, Sivarao S, "Development Of A Stand-Alone Solar Powered Bus Stop", Journal of Mechanical Engineering and Technology, Vol. 3, No. 2, (2011) ISSN: 2180-1053 (DOAJ Indexed)

62) Sivarao, Peter Brevern, N.S.M. El-Tayeb,V.C.Vengkatesh, "Mamdani Fuzzy Inference System Modeling to Predict Surface Roughness in Laser Machining",International Journal of Intelligent Information Technology Application, 2009, 2(1):12-18, ISSN 1999-2459 (DOAJ Indexed)

63) Sivarao, Shukor, T.J.S. Anand, Ammar,"DOE Based Statistical Approaches in Modeling of Laser Processing - Review & Suggestion", International Journal of Engineering & Technology, Vol.10 No.4, August 2010, pp.1- 8, ISSN 2077-1185. (DOAJ Indexed)

64) Sivarao Subramonian , Nur Izan, T. Joseph Sahaya Anand, Fairuz Dimin, "Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical Properties", International Journal of Basic & Applied Sciences, Vol.10 No.4, August 2010, pp.1-6, ISSN 2077-1223. (Indexed - Open Access)

65) Sivarao, T.J.S. Anand, Hanizam Faizul, Indra Devi,"Conceptual Designs towards Developing Mechanically Controlled Semi-Automated Grass Cutter", International Jour. of Mech. & Mechatronics Engineering, Vol.10 No.4, August 2010, pp.29-33. ISSN 2077-124X. (Scopus)

66) Sivarao, Fairuz Dimin, T.J.S. Anand, A. Kamely, Kamil, "Investigation of Tangential Force, Horsepower and Material Removal Rate Associating HAAS CNC Milling, Al6061-T6511 Work Material &TiAlN Coated End Mill Tool",International Journal of Basic & Applied Sciences, Vol.10 No.4, August 2010, pp.23-28, ISSN 2077- 1223. (Indexed - Open Access)

67) Sivarao, Ammar, T.J.S. Anand, Shukor, "Stochastic Modeling and Optimization of Laser Machining by Response Surface Methodology", International Journal of Engineering & Technology, Vol.10 No. 04, August 2010, pp.13-21. ISSN 2077-1185. (Indexed - Open Access)

68) Sivarao Subramonian, T.J.S. Anand, Ariff Hambali, Minhat Mohamad, Azni Faizul,"Review of Automated Machines towards Devising A New Approach in Developing Semi-Automated Grass Cutter", International Jour. of Mech. & Mechatronics Engineering, Vol.10 No. 4, August 2010, pp.1-5. ISSN 2077-124X. (Scopus)

69) Sivarao, et al., "Design and Development of ANFIS Intelligent Model To predict Laser Processing Kerf Width", Journal of Advanced manufacturing Technology, vol.4, No.2 (special edition), 2010. (Indexed - Open Access)

70) S. Sivarao, Siva Kumar Subramaniam, Mazran Esro, T. Joseph Sahaya Anand, "Electrical & Mechanical Fault Alert Traffic Light System Using Wireless Technology", International Jour. of Mech. & Mechatronics Engineering, Vol.10 No.4, August 2010, pp.19-22. ISSN 2077-124X. (Scopus)

71) Sivarao, Fairuz Dimin, T.J.S. Anand, Ridzuan Jamli, A. Kamely, "Surface Quality Investigation of Al 6061- T6511 Using TiAlN Coated Milling Tool", International Journal of Basic & Applied Sciences, Vol.10 No.4, August 2010, pp.55-59. ISSN 2077-1223. (Indexed - Open Access)

72) Siva Kumar Subramaniam, Vigneswara Rao Gannapathy, Sivarao Subramonian, Abdul Hamid Hamidon, "Flood level indicator and risk warning system for remote location monitoring using Flood Observatory System", WSEAS TRANSACTIONS on SYSTEMS and CONTROL, Issue 3, Volume 5, March 2010, pp. 153-163, ISSN: 1991-8763. (Scopus, Q4 & IF, 0.23)

73) Sivarao, T.J.S. Anand, Ammar, Shukor, "RSM Based Modeling for Surface Roughness Prediction in Laser Machining", International Journal of Engineering & Technology, Vol.10 No. 4, August 2010, pp.32-39. ISSN 2077-1185. (Indexed - Open Access)

74) Siva Kumar Subramaniam, Vigneswara Rao Ganapathy, Sivarao Subramonian, Abdul Hamid Hamidon, "Automated traffic light system for road user's safety in two lane road construction sites", WSEAS TRANSACTIONS on CIRCUITS and SYSTEMS, Issue 2, Volume 9, February 2010, pp.71-80. ISSN 1109- 2734. (Scopus, Q3 & IF, 0.23) 13

75) Sivarao, Peter Brevern, N.S.M. El-Tayeb, V.C.Vengkatesh,"Modeling of Laser Processing Cut Quality by Adaptive Network-based Fuzzy Inference System (ANFIS)", Proc. IMechE, Part C: Journal of Mechanical Engineering Science, UK, Vol.223, No.10, 2369-2381, 2009. (Scopus, Q3 & IF, 0.31)

76) Sivarao, Castilo, Tajul, "Surface Roughness Prediction in Deep Drilling by Fuzzy Expert System", International Journal of Mechanical & Mechatronics Engineering (IJMME), Vol.9, No.9, 331-335, 2009. (Scopus)

77) Sivarao, Peter Brevern, N.S.M. El-Tayeb, V.C.Vengkatesh, "GUI Based ANFIS Modeling: Back Propagation Optimization Method for CO2 Laser Machining", International Journal of Intelligent Information Technology Application, Vol.2, No. 4, 191-198, 2009. ISSN 1999-2459. (Indexed - Open Access)

78) Sivarao, T.J.S. Anand, M.Warikh, "Engineering of Tire Pressure Controlling Device: An Invention Towards Successful Product Development", International Journal of Basic & Applied Sciences (IJBAS), Vol. 9, No. 9, 261-264, 2009. ISSN 2077-1223. (Indexed - Open Access)

79) Sivarao, Peter Brevern, N.S.M. El-Tayeb, V.C.Vengkatesh, "Modeling, Testing and Experimental Validation of Laser Machining Micro Quality Response by Artificial Neural Network", International Journal of Engineering & Technology (IJET) Vol.9, No.9, 161-166, 2009. ISSN 2077-1185. (Indexed - Open Access)

80) Sivarao, Peter Brevern, N.S.M. El-Tayeb, "A New Approach of Adaptive Network - based Fuzzy Inference System Modeling in Laser Processing - A Graphical User Interface Based", Journal of Computer Science, USA, Vol.5, No.10, 704-710, 2009. (Scopus, Q3 & IF, 0.52)

81) Sivarao, Peter Brevern, N.S.M. El-Tayeb, "ANFIS Modeling of Laser Machining Responses by Specially Developed Graphical User Interface", International Journal of Mechanical & Mechatronics Engineering (IJMME), Vol.9, No.9, 181-189, 2009. ISSN 2077-124X. (Scopus)

82) Sivarao, Md. Dan Palil, A.Kamely, "Fuzzy Expert System Modeling of Laser Processing" Issue of Special Edition, Journal of Advanced Manufacturing Technology (AMT), Vol.3, No.1, 35-43, 2009. ISSN 1985-3157. (Indexed - Open Access)

83) Sivarao, Castillo, Taufik, "Machining Quality Predictions: Comparative Analysis of Neural Network and Fuzzy Logic", International Journal of Electrical & Computer Sciences (IJECS), Vol.9, No.9, 451-456, 2009. ISSN 2077-1231. (Indexed - Open Access)

84) Sivarao, Thoguluva Vijayaram, "Determination Of Tensile, Flexural Properties And Microstructural Characterization of Calcium Carbonate Filler Reinforced Polypropylene Matrix Composites", Transactions of Indian Institute of Metals, Vol.62, No.3, 245-248, 2009. (Scopus, Q3 & IF, 0.16)

85) Sivarao, M. Amarnath, M.S. Rizal, A. Kamely, "An Investigation Toward Development of Economical Brake Lining Wear Alert System", International Journal of Engineering & Technology (IJET), Vol.9, No.9, 251-256, 2009. ISSN 2077-1185. (Indexed - Open Access)

86) Sivarao, Peter Brevern, N.S.M. El-Tayeb, V.C. Vengkatesh, "GUI Based Mamdani Fuzzy Inference System Modeling To Predict Surface Roughness in Laser Machining", International Journal of Electrical & Computer Sciences (IJECS), Vol.9, No.9, 281-288, 2009.ISSN 2077-1231. (Indexed - Open Access)

87) Thoguluva Vijayaram, Sivarao, "Surface Finish Investigation on Anchor-Shaped Lead Casting", Indian Foundry Journal, Vol.54, No.6, 27-30, 2008. (Indexed - Open Access)

88) Sivarao P.S., C.W. Chin, "Comparison of Statistical and Mathematical Method for determination of Tool Wear in Drilling", Journal of Mechanical Engineering, Strojnicky Casopis, vol. 55, 4, pp. 187-198, 2004, ISSN 0039-2472. (Scopus, Q2 & IF, 0.33)

89) C.W. Chin, T.S. Lee, Sivarao Subramonian, "Performance Analysis and Postulation Modeling of Tool Wear in Drilling", Journal of Science and Engineering (AJSE), American International University of Bangladesh, Bangladesh, vol. 3, 1, pp. 75-82, 2004, ISSN 1608-3679. (Indexed - Open Access)

90) C.W. Chin, T.S. Lee, Sivarao, "Comparative Performance Analysis & Modeling of Tool Wear in Drilling", International Journal of Applied Mechanics and Engineering, Poland, vol. 9, Special Issue: ITC 2004, pp. 33- 38, 2004, ISSN 1425-1655. (Indexed - Open Access)

14 91) C.W. Chin, T.S. Lee, Sivarao, "Comparative Analysis & Modeling of Surface Roughness in Drilling", International Journal of Applied Mechanics and Engineering, Poland, vol. 9, Special Issue: ITC 2004, pp. 305-311, 2004, ISSN 1425-1655. (Indexed - Open Access)

International Proceedings

1) Sivaraos, Yap, T.C., Qumrul, Amran, M.A., Anand, T.J.S., Izamshah, R., Aziz, A.A., "Friction Performance Analysis of Waste Tire Rubber Powder Reinforced Polypropylene Using Pin-On-Disk Tribometer", Malaysian International Tribology Conference (MITC2013), 18-20 November 2013, Sabah, Malaysia.

2) Sivaraos, Dimin, M.F., Faris, N.M.F., Hambali, A., DharMalingam, S., Sapuan, S.M., "Analytical Hierarchy Process for Design Selection of Micro Hot-Marking Tool", 3rd International Conference & Exhibition on Sustainable Energy & Advanced Material (ICE-SEAM 2013), 30-31 October 2013, Melaka, Malaysia.

3) DharMalingam. S., Rivai, A., Said, M.R., Daud, M.A.M., Subramonian, S., "Effect of Reprocessing Palm Fiber Composite on the Mechanical Properties", 3rd International Conference & Exhibition on Sustainable Energy & Advanced Material (ICE-SEAM 2013), 30-31 October 2013, Melaka, Malaysia.

4) Izamshah, R., Lung, A.Y., Ali, M.A., Kasim, M.S., Bakar, M.H.A., Subramonian, S., "Optimisation of Machining Parameter for Milling Polyethereketones (PEEK) Biomaterials", 3rd International Conference & Exhibition on Sustainable Energy & Advanced Material (ICE-SEAM 2013), 30-31 October 2013, Melaka, Malaysia.

5) DharMalingam. S., Rivai, A., Said, M.R., Subramonian, S., Selamat, M.Z., "V-Bend Die Forming Performance of Oil Palm Fiber Composite", 3rd International Conference & Exhibition on Sustainable Energy & Advanced Material (ICE-SEAM 2013), 30-31 October 2013, Melaka, Malaysia.

6) Sahroni, T.R., Yeau, Y.S., Widodo, W.S., Bakar, B.A., Sivaraos, Ali, M.A.M., Kasim, M.S., "Fatigue Life Analysis of High Performance Motorcycle Disc Brake", 3rd International Conference & Exhibition on Sustainable Energy & Advanced Material (ICE-SEAM 2013), 30-31 October 2013, Melaka, Malaysia.

7) Amran, M.A., Salmah, S., Hussein, N.I.S., Izamshah, R., Hadzley, M., Sivaraos, Kasim, M.S., Sulaiman, M.A., "Effects of Machine Parameters on Surface Roughness Using Response Surface method in Drilling process", Malaysian International Tribology Conference (MITC2013), 18-20 November 2013, Sabah, Malaysia.

8) Amran, M., Salmah, S., Zaki, M., Izamshah, R., Hadzley, M., Sivarao, S., Shahir, M., Amri, M., "Study the Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine", International Manufacturing Engineering Conference 2013 (IMEC 2013), 1-3 July 2013, Pahang, Malaysia.

9) Mohd Amran Md Ali, Raja Izamshah Raja Abdullah, Mohd Hadzley Abu Bakar, Nur Izan Syahriah Hussein, Sivarao Subramonian, Shogo Nobukawa and Masayuki Yamaguchi, "Mechanical Properties of Polypropylene Composites Containing Polymer Fibers", International Conference on Design and Concurrent Engineering, iDECON2012, 15-16 October 2012, Melaka, Malaysia.

10) Mohd Yunus, M.F., Hussein, N.I.S., Md Ali, M. A. and Subramonian, S., "Effect of CNC Ball Nose End Milling Process Parameters on Surface Roughness and Chip Length of Aluminium Alloy 6061", International Conference on Design and Concurrent Engineering, iDECON2012, 15-16 October 2012, Melaka, Malaysia.

11) Raja Izamshah, Mohd Hadzley Abu Bakar, Mohd Amran Md Ali and Sivarao, "Effects of End Mill Clearance Angle on Surface Error for Machining Low Rigidity Aerospace Structure Component", International Conference on Design and Concurrent Engineering, iDECON2012, 15-16 October 2012, Melaka, Malaysia.

12) Siva kumar, Sivarao, Mazran, et al., "Safety Traffic Light System For Road Construction Site", 4th International Symposium on Broadband and Communication (ISBC2010), 11th - 14th July 2010, Melaka, Malaysia.

13) Suresh Kumar, Sivarao, et al., "Influence of Wafer Probing Against Initial Bonding", 34th International Electronics Manufacturing Technology Conference (IEMT2010), 30th November - 2nd December 2010, Melaka, Malaysia.

15 14) Taufik, Kee Kuo Zhuan, Tajul Ariffin, Sivarao, "Design Optimization On Rotary Draw Tube Bending Parameters Using FEA", International Conference on Design and Concurrent Engineering (iDECON 2010), 20th - 21st September 2010, Melaka, Malaysia.

15) Suresh Kumar, Sivarao, et al., "Solving Eventual Bonding Quality To Enhance Adhesion For QFN Packages", 34th International Electronics Manufacturing Technology Conference (IEMT2010), 30th November - 2nd December 2010, Melaka, Malaysia.

16) Taufik, Tajul, Sivarao, "Design and analysis of long cylindrical workpiece fixtures", The 2nd International Conference on Engineering &ICT (ICEI2010), 18th-20th February 2010, Melaka, Malaysia.

17) Rahim, A.S., Hambali, A., Z. Marjom, Sivarao, Khairul, A.R, "Optimization Design of a Portable Hose Reel Using Integrated Approach", International Conference on Design and Concurrent Engineering (iDECON 2010), 20th - 21st September 2010, Melaka, Malaysia.

18) Ganesh, Sivarao, Anand, "An overview of Intermetallic Nickel Aluminides (Ni3Al) as an alternative Automotive Body Material", International Conference on Design and Concurrent Engineering (iDECON 2010), 20th - 21st September 2010, Melaka, Malaysia.

19) Taufik, Aman Shah, S., Abdullah, T.S, Sivarao, "Design Rules for Sheet Metal working Based on Design for Manufacture (DFM) Methodology", International Conference on Design and Concurrent Engineering (iDECON 2010), 20th - 21st September 2010, Melaka, Malaysia.

20) Taufik, Tajul, Sivarao, "Design and analysis of multi LED fixtures by rapid prototyping", The 2nd International Conference on Engineering &ICT (ICEI2010), 18th-20th February 2010, Melaka, Malaysia.

21) Sivarao, A. Tajul, Taufik, "Design and development of Automatic Tyre Pressure Controller", International conference on Applications and Design in Mechanical (ICADME '09), Penang, Malaysia, 11-13 October 2009.

22) Sivarao, M.S. Rizal, A. Tajul, Taufik, "Development of Man-Machine Interface Using Matlab: An Adaptive Network-Based Fuzzy Inference System Modeling For Laser Machining", International Conference on Man Machine Systems (ICoMMS '09), Penang, Malaysia, 11-13 October 2009.

23) Sivarao, A.Tajul, Taufik, "Micro sensor Embedded Brake Pad Monitoring System", International conference on Applications and Design in Mechanical (ICADME '09), Penang, Malaysia, 11-13 October 2009.

24) Sivarao, Azhar Shah, Mohd Rizal Salleh, Kamely A, Tajul A, Taufik, "Mechanical Properties Modification of PolyEthylene for CaCo3 Particulated Composites", The International Conference on Advances in Materials and Processing Technologies (AMPT '09), Kuala Lumpur, Malaysia, 26-29 October 2009.

25) Sivarao, Azhar Shah, Mohd Rizal Salleh, Kamely A, Tajul A, Taufik, "Characterizing Chicken Egg Shell Reinforced PolyPropylene", The International Conference on Advances in Materials and Processing Technologies (AMPT '09), Kuala Lumpur, Malaysia, 26-29 October 2009.

26) Taufik, S. Sulaiman, T.A. Abdullah, Sivarao, "Design and Simulation on Cast Metal Matrix Composite By Investment Casting", The International Conference on Advances in Materials and Processing Technologies (AMPT '09), Kuala Lumpur, Malaysia, 26-29 October 2009.

27) Taufik, S.Sulaiman, T.A. Abdullah, Sivarao, "Design and Simulation on compressor Metal Matrix Composite By Investment Casting", The International Conference on Advances in Materials and Processing Technologies (AMPT '09), Kuala Lumpur, Malaysia, 26-29 October 2009.

28) Taufik, Ong Chee Shen, Tajul Ariffin Abdullah, Sivarao, "Design and Analysis of Multi LED Machine Fixture" International conference on Applications and Design in Mechanical (ICADME '09), Penang, Malaysia, 11-13 October 2009.

29) Sivarao, "Regression Model Development of Two Layer Control System Based on Engine RPM", Curtin University of Technology Science and Engineering International Conference 2008 (CUTSE 2008), Curtin University of Technology, Miri, Sarawak, Malaysia, 24 - 27 November 2008.

16 30) Sivarao, "Super Saving Cooling System: A New Design and Analysis for Home Air-Conditioning", Curtin University of Technology Science and Engineering International Conference 2008 (CUTSE 2008), Curtin University of Technology, Miri, Sarawak, Malaysia, 24 - 27 November 2008.

31) Sivarao, "New Approach to Replace Home Air-Conditioning: A Novel Design to Develop Natural Cooling System", International Conference On Science & Technology (icstie'08), Penang, Malaysia, 12-13 December 2008.

32) Sivarao, Sivasan Karan Nair, "Full Hydraulic Transmission System Design for Automobile Application", International Conference On Science & Technology (icstie'08), Penang, Malaysia, 12-13 December 2008.

33) Sivarao, Sivasan Karan Nair, "PV-Elite Based Design and Analysis of Pressure Vessel - Air Receiver for O&G Industry" International Conference On Science & Technology (icstie'08), Penang, Malaysia, 12-13 December 2008.

34) Sivarao, Sivasan Karan Nair, "Rapid Improvement of Duty Cycle: Re-engineering of a Portable Welding Machine Performance" International Conference On Science & Technology (icstie'08), Penang, Malaysia, 12- 13 December 2008.

35) Sivarao, Thoguluva Vijayaram, Intan Sharhida, Zurina Shamsudin, "Creep Characteristics of Calcium Carbonate particulated PolyPropylene Matrix" International Conference On Science & Technology (icstie'08), Penang, Malaysia, 12-13 December 2008.

36) Sivarao, Thoguluva Vijayaram, Sivasan Karan Nair, "Automatic Cutting Fluid Control in Milling: Towards Improved Tribology and Economical Manufacturing Practice" International Conference On Science & Technology (icstie'08), Penang, Malaysia, 12-13 December 2008.

37) Sivarao, "Micro Quality Investigation Of Mn-Mo Pressure Vessel Plate In Laser Machining" World Engineering Congress (UPM - IEM), Penang, Malaysia, 5-9 August 2007.

38) Sivarao, "Back-Propagation Neural Network Predictive Modeling in Laser Machining", Regional Conference On Engineering Mathematics, Mechanics, Manufacturing & Architecture (Em3arc) 2007, University Kebangsaan Malaysia, 27-28 November 2007.

39) Sivarao, Taufik, "Design and Development of an Automobile Brake Lining Monitoring System", International Conference on Engineering &ICT (ICEI'07), Equatorial Hotel, Melaka, Malaysia, 27-28 November 2007.

40) Sivarao, Rahim, Taufik, Ammar, "Coating Characterization of TiN&TiAlN on Burr Formation in Drilling - Pragmatic Investigation", International Conference on Engineering &ICT (ICEI'07) Equatorial Hotel, Melaka, Malaysia 27-28 Nov. 2007.

41) Sivarao, Taufik, "Comparative Quality Investigation of Rolled and Flat Carbon Steel Plates in Drilling", International Conference On Engineering &ICT (ICEI'07) Equatorial Hotel, Melaka, Malaysia, 27-28 November 2007.

42) P.S.Sivarao, MarcioBacci da Silva, "Fuzzy Modeling Of Tool Wear In Drilling", 18th International Congress of Mechanical EngineeringNovember 6-11, 2005, OuroPreto, MG.

43) Sivakumar DharMalingam, SivaRao Subramoniam, Tan, Chee Fai (2006) "Engineering Aesthetics And Aesthetics Ergonomics Evaluation Tools In Product Design And Development", National Conf. On Design and Concurrent Engineering (DECON 2006), 9-10 August 2006, Melaka, Malaysia.

44) Sivakumar DharMalingam, SivaRao Subramonian, Ahmad Rivai, Tan Chee Fai, Mohd Radzai, Said, (2006), "Buckling Behaviour Of Angle Section Beam With The Unstiffened Flanges In Compression", National Conf. On Design and Concurrent Engineering (DECON 2006), 9-10 August 2006, Melaka, Malaysia.

45) Md Ali Mohd Amran, Mohd Sani, Siti Salmah, Raja Abdullah, Raja Izamshah, Abu Bakar Md Ali, Subramonian Sivarao, Hussein, Nur Izan Syahriah, Hussain, Mohamad Zaki, (2012), "Optimization Parameters of Injection Moulding Machine For Reducing Warpage of Dog Bone Plastic Part", The 28th International Conference Of The Polymer Processing Society (PPS-28), 11-15 December, Pattaya.

17 National Proceeding

1) Sivaraos, Hambali, A., Salleh, M.R., Amran, M., Izamshah, R., Anand, T.J.S., "A Super Energy Saving Door Locking Solution (SES-LOCK)", Himpunan Abstrak Persidangan Kebangsaan Kedua Program Pemindahan Ilmu, 9 - 11 September 2014, Putrajaya, Malaysia.

2) Sivaraos, Aziz, A.A., Hambali, A., Salleh, M.R., Anand, T.J.S., Izamshah, R., Hussein, N.I.S., Warikh, M., "Super Energy Saving Locking System (SES-LOCK)", Himpunan Abstrak Persidangan Kebangsaan Pertama Program Pemindahan Ilmu, 21-23 Ogos 2013, Bangi, Malaysia.

3) T. Joseph Sahaya Ananad, Sivarao, K. Ganesh Kumar, "Mechanical and Chemical Properties of Intermetallic Ni3Al for Automotive Body", Seminar Hasil Penyelidikan, Kementerian Pengajian Tinggi, November 2012, Akademi Kepimpinan Pengajian tinggi (AKEPT), 8-9 November 2012.

4) Taufik, Tajul Ariffin, Sivarao, "Design and simulation of offshore wind power platform", Malaysia Technical Universities Conference on Engineering and Technology, 28th - 29th June 2010, Melaka, Malaysia.

5) Ganesh, Sivarao, T.J.S. Ananad, "Mechanical Properties of Intermetallic Aluminides for Automotive Body Materials", National Conference on Advanced Manufacturing & Material Engineering 2010, UniversitiTun Hussein Onn Malaysia, Johor

6) Sivarao, "Automatic Tyre Pressure Controller (ATPC)", National Conference on Bumiputra Small Medium (SME) Industries, Academy of Malaysian SMEs, Putra World Trade Centre (PWTC), 10-11 March, 2009.

7) Sivarao, M.S. Kasim, Sivasan, M.A. Sulaiman, A.R.M. Warikh, Taufik, Tajul A, "Double Layer Control System Based on Engine RPM: A Regression Model Development & Practical Application", Malaysian Technical Universities Conference on Engineering and Technology 2009 (MUCEET 2009), MS Garden Hotel, Kuantan, Pahang, Malaysia, 20-22 June 2009.

8) Sivarao, Taufik, M.S. Kasim, Sivasan, M.A. Kamely, A.R.M. Warikh, M.A. Sulaiman, Tajul A, "Fully Automated Transmission System in Automobile Application: A Feasible Investigation", Malaysian Technical Universities Conference on Engineering and Technology 2009 (MUCEET 2009), MS Garden Hotel, Kuantan, Pahang, Malaysia, 20-22 June 2009.

9) Sivarao, M.S. Kasim, Sivasan, N.I.S Hussein, A.R.M. Warikh, A.S. Rahim, Tajul A, Taufik, "Preliminary Investigation of Developing Most Economical Cooling System Utilizing Underground Time-Delay Characteristics", Malaysian Technical Universities Conference on Engineering and Technology 2009 (MUCEET 2009), MS Garden Hotel, Kuantan, Pahang, Malaysia, 20-22 June 2009.

10) Rusydah, Shahir, Sivarao, Rizal, "Experimental Investigation of Significance Parameters in Surface Grinding - Quality Evaluation", National Conference on Design & Concurrent Engineering 2008 (DECON2008), Avilion Legacy Hotel, Melaka, Malaysia, 28-29 March 2008.

11) Sivarao, Rahim, Hadzley, Taufik, "Micro Switch Embedment - Brake Lining Wear Limit Alert System", Malaysian Technical Universities Conference on Engineering and Technology (MUCET'08), PutraPalace, Perlis, Malaysia, 8-10 March 2008.

12) Abdul Rahim, Sivarao, Hadzley, "Optimal Setting of Core Parameters in CO2 Laser Machining Quality Investigation", Malaysian Technical Universities Conference on Engineering and Technology (MUCET'08), Putra Palace, Perlis, Malaysia, 8-10 March 2008.

13) Taufik, Shajahan, and Sivarao, "Study on Design Optimization in Designing of Sheet Metal Part", Malaysian Technical Universities Conference on Engineering and Technology (MUCET'08), Putra Palace, Perlis, Malaysia, 8-10 March 2008.

14) Sivarao, Rahim, Hadzley, Taufik, "Investigation of Embedding Brake Lining Wear Limit Sensor on Malaysian Made Proton Perdana V6 Using Brake Linings Manufactured in Malaysia", REACH, Quality Hotel, Kuala Lumpur, Malaysia, 2007.

15) Sivarao, Bagas Wardono, Rahim, Taufik, "Residual Effect on Quality of Rolled & Flat Steel Plates in Drilling", REACH, Quality Hotel, Kuala Lumpur, Malaysia, 2007.

18 16) Rahim, Sivarao, "Burr Formation Investigation with TiN&TiAlN Coated Twist Drills", REACH, Quality Hotel, Kuala Lumpur, Malaysia, 2007.

17) Rahim, Sivarao, "Effect of Pressure, Frequency and Duty Cycle on Laser Cut Surface", REACH, Quality Hotel, Kuala Lumpur, Malaysia, 2007.

18) Taufik, Shajahan, Sivarao, "Design Rules Optimization in Designing of Sheet Metal Part", REACH, Quality Hotel, Kuala Lumpur, Malaysia, 2007.

19) Sivarao, "Linguistic Fuzzy ModelingIn Laser Machining Quality Evaluation", Malaysian Science and Technology Congress (MSTC2007), Holiday Villa, Kuala Lumpur, Malaysia, 4-6 September 2007.

Academic Modules

1) Sivarao Subramonian, Abdul rahim samsudin, “Fixtures For Precision Manufacturing – Principle To Practical Guide”, Module 16, Teaching and Learning Series, Faculty of manufacturing Engineering, Universiti Teknikal Malaysia Melaka,Penerbit UTeM

2) Sivarao Subramonian, Md Nizam abd Rahman, “JIG For Manufacturing – Concept For Construction Design”, Module 15, Teaching and Learning Series, Fac. of mfg. Eng., Universiti Teknikal Malaysia Melaka,Penerbit UTeM

3) Sivarao Subramonian, Mohd Rizal salleh, Taufik, & Nor Akramin Mohamad, “Design of Experiment (DoE) - Step By Step Practical Applications For Beginners”, Module 14, Teaching and Learning Series, Faculty of manufacturing Engineering, Universiti Teknikal Malaysia Melaka,Penerbit UTeM

4) Sivarao Subramonian, Ahmad Kamely & Md. Nizam Abd. Rahman, Advanced manufacturing Processes, Module 1 - Teaching & Learning Series, Faculty of Manufacturing Engineering, 2009, Penerbit UTeM, Melaka, Malaysia.

5) Ammar, Sivarao Subramonian, M. Minhat, M.N. Abd Rahman, M.R. Salleh, Manufacturing Process Volume 1, Module 8 - Teaching & Learning Series, Fac. of Mfg. Engineering, 2013, Penerbit UTeM, Melaka, Malaysia.

INNOVATION & RESEARCH AWARDS

1) Gold Medal – Tyre Pressure Sustyaining System (T-PreSS), International Invention, Innovation & Technology Exhibition (ITEX 2015), Kuala Lumpur.

2) Silver Medal - Intelligent Affective State Assessment Tool For Post Stroke Patiens In Malaysia Using wireless EEG Signal International Invention, Innovation & Technology Exhibition (ITEX2015), Kuala Lumpur

3) Bronze Medal– Attendance System Using Near Field Communication (NFC), International Invention, Innovation & Technology Exhibition (ITEX2015), Kuala Lumpur

4) Gold Medal - Vehicle Smart Security (VESS), International Invention, Innovation & Technology Exhibition (ITEX 2014), Kuala Lumpur.

5) Gold Medal - Sustainable Welding Technology, International Invention, Innovation & Technology Exhibition (ITEX 2014), Kuala Lumpur.

6) Gold Medal - “MESTI” Malacca-Eco-Stylish-Tiles, International Invention, Innovation & Technology Exhibition (ITEX 2014), Kuala Lumpur.

7) Special Award & Gold Medal – Tyre Pressure Sustaining System (T-PreSS), UTeM Innovation Exhibition (Mini UTeMEX2014)

8) Gold Medal – Skate Board Wheel, UTeM Innovation Exhibition (Mini UTeMEX), 2014

19 9) Silver Medal - Sustainable Welding Technology, International Invention, Innovation & Technology Exhibition (ITEX 2014), Kuala Lumpur.

10) Gold Medal & Special Award – Wireless maintenance Alert System (Wi-MAS), UTeM Innovation Exhibition (UTeMEX), 2013.

11) Gold Medal – Design of production tooling based on recycled material and natural fiber composite by sand casting technique, UTeM Innovation Exhibition (UTeMEX), 2012.

12) Silver Medal – Supa Fast Grill Locking System, UTeM Innovation Exhibition (UTeMEX), 2012.

13) Silver Medal – Development of bearing removal for crank shaft at the conceptual design stage, UTeM Innovation Exhibition (UTeMEX), 2012.

14) Gold Medal - Blood Donor Scale With Real Time Optimizer System, International Invention, Innovation & Technology Exhibition (ITEX), Kuala Lumpur Convention Centre, 2011.

15) Gold Medal - Novel approach for Single Display Traffic Light System With The Ability To Cater For Color Vision deficiency Drivers, International Invention, Innovation & Technology Exhibition (ITEX), Kuala Lumpur Convention Centre, 2011.

16) Gold Medal - High End Security Lock With Green Technology, The Belgian and International Trade Fair Technological Innovation, Brussels, year 2010.

17) National Champion Award & Cash - Super Energy Saving Locking System, (Community Category) – The Malaysia Innovative Competition 2010 – awarded by Prime Minister of Malaysia.

18) Regional Champion Award & Cash - Super Energy Saving Locking System, (Community Category) – The Malaysia Innovative Competition 2010.

19) Silver Medal - Electro Mechanical Locking System, Seoul International Invention Fair (SIIF 2010), Korea.

20) Gold Medal - Automated Intelligent Storage Security and Alert System, Seoul International Invention Fair (SIIF 2010), Korea

21) Gold Medal - Traffic Light Electrical and Mechanical Fault Alert System Using Wireless Technology (WI- Traffic Light), The Belgian and International Trade Fair Technological Innovation, Brussels, 2010

22) Gold Medal - Traffic Light Electrical and Mechanical Fault Alert System Using Wireless Technology, International Invention, Innovation & Technology Exhibition (ITEX 2010), Kuala Lumpur.

23) Silver Medal - Energy Saving Door Security System (ESDoS), The Invention and Innovation Competition, Malaysia Technology Expo, MTE2010.

24) Cash Award - Automatic Tire Pressure Controller (ATPC), Commercialization and business matching of researched and innovative Product, National conference of SMEs Bumiputra 2009, PWTC, Kuala Lumpur.

25) Silver Medal - Exhaust Gas Operated Vacuum Cleaner (Ego-Vc), International Product Design & Invention Competition, Geneva, Switzerland, 2007.

26) Silver Medal - Smart Switching System (S3), International Product Design & Invention Competition, Geneva, Switzerland, 2007.

27) Bronze Medal - Exhaust Gas Operated Vacuum Cleaner and Water Pump, International Invention, Innovation & Technology Exhibition (ITEX 2007), Kuala Lumpur.

28) Bronze Medal - Exhaust Gas Operated Vacuum Cleaner (EGO-VC), The Invention and Innovation Competition, Malaysia Technology Expo, MTE2010.

29) Bronze Medal - Automatic Tyre Pressure Controller (ATPC), The Invention and Innovation Competition, Malaysia Technology Expo, MTE2010.

20 SUPERVISION (MASTERS & PHD BY RESEARCH)

No Name Title Degree Role Status Design And Analysis Of Semi-Automatic Ainol Suhada Bin Principal 1 Automotive Tyre Inflation System MSc. Graduated Dahlan Supervisor (2011) Development And Performance Analysis Abdul Zuhair Bin Principal Graduated 2 of Laser Turning Operation MSc. Abdul Khalim Supervisor (2012) Statistical Approach In Solving For Initial Suresh Kumar Principal Graduated 3 And Eventual Wire Bonding Problem MSc. Somasundram Supervisor (2013) Hexane Recovery Improvement In Palm Nantakumar A/L Kernel Extraction Plant By Redesigning Principal Graduated 4 MSc. M.Rajoo Heat Exchanger Supervisor (2013)

Manufacturability Of Cost Effective Engine Principal Graduated 5 Tin Shaw Liang Oil Life Alert System Academic MSc. Supervisor (2015)

Robert Milkey Laser Machining Of Glass Fibre Principal Graduated 6 A/L Reinforced Plastics MSc. Supervisor (2015) Kolandaisamy Synthesizing Air Pressure Loss replinishing System For Inflateable Principal Submitted 7 Ainol suhada PhD Automobile Tyres Supervisor (2015)

Process Modeling and Optimization of Rostam Bin Conventional Fluidized Bed Granulator Principal 8 PhD On-Going Omar For Degredable Material Supervisor

Investigation of Non-Linear Profiling in Abdul Zuhair Bin Laser Turning by Modifying Flat Bed Principal 9 PhD On-Going Abdul Khalim Laser Cutting machine Supervisor

Design and analysis of Unique Keyless Principal Submitted 10 Lim Si Qing Grill Locking System MSc. Supervisor (2015)

Synthesizing solution For Natural Raguvaran A/L Principal Viva Passed 11 Pressure Drop of Automotive Tyre MSc. Jayahkudy Supervisor (2015)

Ansys Modeling of Heat Dissemination Rosfadzlin Principal 12 For Lower Energy CO2 Laser Machining MSc. On-Going Hanna Bt. Zainal Supervisor

Characterizing and Modeling of welding Nor Fazielah Performance By Hybridized Laser Cut- Principal 13 MSc. On-Going Binti darwis weld Machine Supervisor

Engineering of Rockwool Fibre Reinforced Principal Viva Passed 14 Leong Shu Teng Polymer Matrix based Composites MSc. Supervisor (2015)

Simulation study On Green Processing: Norhidayah Fluidized Bed Granulation System for Co 15 PhD On-Going Mohamad Biodegradable Urea Granules Supervisor

Refine Study And Intervention In Burr Co Free And Miro Hole Piercing In Precision Supervisor 16 Boey KoK Hoong D.Eng. On-Going Metal Stamping

21 SUPERVISION (MASTERS BY COURSEWORK)

No Name Research Title Year Status 1 Turki Diwan Hussein Laser Process of Non-Linear 2013 Completed Incline Cutting

2 Badr Kamoon Dabis Laser Processing of Linear 2013 Completed Bevel Cutting

INTERNAL EXAMINER

No. Name Degree Viva Date

1 Nurul Farah Adibah Binti Mohd MSc 28/10/2014 2 Nur Fawwaz Binti Asri MSc 9/01/2014

3 Ahmad Zaifailin Bin Zainordin MSc 1/08/2013

4 Mohd Soufhwee Abd Rahman MSc 15/03/2013

5 ErmanSyah Sachlan MSc 20/11/2012

EXTERNAL EXAMINER

No. Name Degree Univ. Viva Date

1 Mohd Fahrurazi Bin Mohd Nor MSc UTHM 28/02/2013

Viva-Voce Chairman

No. Name Title Degree Date Development Of An Integrated Failure Mode Effect And Criticality Analysis (Fmeca) And Mohd Azroy Bin Mohd 1 Analytical Hierarchy Process (AHP) For MSc 21/01/2015 Razikin Automotive Stamping Part

Structure Model Of Customer Satisfaction Fevilia Nurnadia Binti Adria 2 Using The Integration Of KE And KM MSc 20/06/2014 Syaifoel

Low Frequency Friction Induced Vibration Of 3 Kumaresan A/L Magaswaran Automotive Disc Brake MSc 14/03/2014

Effects Of Torque Direction, Shape, Size, 4 Ng Poh Kiat Sensation And Technique On Pinch MSc 3/09/2014

Design And Analysis Of Fuzzy Linear Quadratic Regulator Controller For Rotary 5 Tang Teng Fong MSc 17/11/2014 Inverted Pendulum System

22 COMMERCIALISED RESEARCH PRODUCTS / TECHNOLOGIES

1) Automatic Tyre Pressure Controller (ATPC) – Principal Inventor/Researcher

2) Electro-Mechanical Locking System – Principal Inventor/Researcher

INDUSTRY / SELF FUNDED RESEARCH PROJECTS

1) Exhaust Gas Operated Vacuum Cleaner (Completed – Award winning project)

2) Smart Switching System (Completed – Award winning project)

3) Exhaust Gas Operated Fertilizer/Pesticide Dispensing System (Completed – Award winning Project)

4) Perpetual Green Power Generator (Completed – Award winning project)

5) Cow manure based fire starter / igniting device (completed – Award winning project)

CONSULTATION

Industrial & Institutional Consultation

1) 2015 – Conduct of Non-Traditional Manufacturing Processes for MSc Bridging Course (under „off-shore‟ programme – Universiti Teknikal Malaysia Melaka)

2) 2015 – Intellectual Property Workshop, Melaka & Negeri Sembilan Regional level, organized by Community College, Selandar, Melaka

3) 2015 – Research Methodology seminar, Series 1/2015, UTeM

4) 2014 – Workshop on How To Innovate Effectively, for Politeknik Ibrahim Sultan Akademics

5) 2013 – Innovation Champion Development Workshop, for Politeknik Nilai Engineering Academics

6) 2013 – Innovation Champion Development Workshop - for Politeknik Nilai Non-Engineering Academics

7) 2012 - MSc. project presentation panel (MSc. „off-shore‟ programme – Politeknik Johor Bahru, Johor)

8) 2011 - MSc. project presentation panel (MSc. „off-shore‟ programme – Politeknik Kota Kinabalu, Sabah)

9) 2011 - MSc. project supervisor (MSc. „off-shore‟ programme – Politeknik Johor Bahru, Johor)

10) 2010 - Innovation Essential Talk – Conducted for Politeknik staff (co-organized by Ministry of Higher Education)

Private Consultation

1) 2015 – Automatic maintenance alert system (Premium Vegetable Oil, JB)

2) 2015 – Hexane control design (Premium Vegetable Oil, JB)

3) 2014 – Process design and optimization (T.Yamaichi Pte. Ltd., Shah Alam)

4) 2014 – Design of humidifier – API control (Premium Vegetable Oil, JB)

5) 2013 – Boiler design for palm oil extraction plant (Premium Vegetable Oil, JB)

6) 2013 – Maintenance alert system implementation (Premium Vegetable Oil, JB)

23 7) 2012 – System efficiency Improvement for hexane regain (Premium Vegetable Oil, JB)

8) 2011 – Design of motor transmission tracking system (Kara Eng., KL &JB)

9) 2011 – Design of a heat exchanger and piping (Entropy Eng., JB)

10) 2010 – Design of split air conditioning, sewage, and plumbing system for Chinese temple (M&E consultant)

11) 2010 – Design of 20‟ hydraulic ram for palm kernel shell hush loading (Premium Vegetable Oil, JB)

12) 2010 – Design of condensing system for hexane regain (Premium Vegetable Oil, JB)

13) 2009 - Design of plumbing and sewage system for 10 storey apartment (M&E consultant, JB)

14) 2008 – Design of fire-fighting system for 5 storey building (M&E consultant, JB)

15) 2008 – Design of central air conditioning system for 10,000 m2 occupancy building (M&E consultant, JB)

JUDGE/JURY/PANEL FOR INVENTION, INNOVATION & RESEARCH GRANT

1) Judge, International A‟ Design Award & Competition, Italy, 2015

2) Judge, National Innovation Competition on Teaching and Learning in Electrical Engineering (NiCTEE), 2015

3) Judge, National Level Innovation Program - MyINOVASI 2014

4) Judge, International Invention Innovation & Technology Exhibition (ITEX), Kuala Lumpur

5) Judge, Malaysia Technology Exspo (MTE), Kuala Lumpur

6) Judge, Ekspo Penyelidikan dan Ciptaan Institusi Pengajian Tinggi Antarabangsa (PECIPTA)

7) Chief Judge, Science Fair For Young Children (SFYC), State of Negeri Sembilan

8) Judge, Science Fair For Young Children (SFYC), State of Melaka

9) Judge, Grass Root Innovation Programme, Yayasan Inovasi Malaysia (YIM), Kuala Lumpur

10) Judge, Private Sector Innovation Awarding Program (Educational Institution & Industries), Melaka

11) Speaker, MyInovasi 2012 Ministry of Higher Education (KPT) Flagship programme, Invited to speak as an Innovator, Johor Bahru 12) Judge, Malaysia Technology Expo (MTE) Innovative Product Screening, UTeM

13) Judge, Innovation and Technology Competition (INOTEK), UTeM

14) Judge, Pertandingan Inovasi Program Perkaya Inovasi Politeknik Merlimau, Melaka

15) Judge, Design and Innovation Technology (DENOTECH) Exhibition, UTeM

16) Judge, MAL Technical & Innovation Symposium, Infineon, Melaka

17) Panel, Fundamental Research Grant Scheme (FRGS), UTeM

18) Panel, Short Term Research Grant (PJP), UTeM

19) Panel, Young Inventor Challenge (YIC), Kuala Lumpur

20) Panel, Business Idea & Business Plan Competition 2013/2014, UTeM

24 21) Panel, Malaysian Technical Universities Conference On Engineering and Technology MUCET (2013)

22) Co-Founder & Member, Malaysia Innovation Gearing Society (Persatuan Gerak Inovasi Malaysia - InoMa)

REVIEWER & EDITORIAL BOARD MEMBER

1) Journal of Engineering Manufacture (JEM) - Proceedings of the Institution of Mechanical Engineers (I. Mech. E) Part B, UK.

2) International Journal of Materials And Product Technology (IJMPT) – Special Issue on: “Intelligent Machining-Computational Methods and Optimization”

3) Journal of Mechanical Engineering Science (JMES) - Proceedings of the Institution of Mechanical Engineers (I. Mech. E), Part C, UK.

4) Journal of Engineering Science And Technology Review (JESTR), Lucas, Kavala, Greece.

5) Journal of Electrical and Electronics Engineering Research (JEEER).

6) Journal of Engineering Science & Technology (JESTEC), School of Engineering, Taylor‟s University, Malaysia.

7) International Journal of Artificial Intelligence and Soft Computing (IJAISC)

8) International Journal of Industrial Ergonomics (USA – Elsevier)

9) International Journal of Swarm Intelligence Research (IJSIR)

10) International Journal of Industrial and Systems Engineering

11) 3RD Int. Conf. & Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM) 2013, Melaka, Malaysia.

12) Fourth International Conference on Computing and Informatics (ICOCI) 2013, Sarawak, Malaysia

13) Journal of Reinforced Plastics and Composites (JRPC)

14) Journal of Scientific Research and Reviews (JSRR)

15) African Journal of Biotechnology (AJB)

16) International Conference on Mfg. Science and Technology (ICOMAST) 2006, Multimedia University, Malaysia.

17) Int. Conference on Intelligent & Advanced Systems (ICIAS) 2007, Kuala Lumpur Convention Centre, Malaysia.

18) International Journal of Operational Research (IJOR)

19) The International Research Journal of Engineering Science, Technology and Innovation (IRJESTI)

20) Journal of The Institution of Engineers (India): Series C (IEIC)

21) Editorial Board - International Conference on Artificial Intelligence in Computer Science and ICT

22) Editorial Board - International Electrical Engineering Journal

23) Editorial Board - Journal of Mechanical Engineering and Technology

24) Technical Committee - International Postgraduate Network Shah Alam Malaysia.