Andreas Larsson
Total Page:16
File Type:pdf, Size:1020Kb
CURRICULUM VITAE ANDREAS LARSSON 1. CURRENT POSITION 2015-, Associate Professor, Mechanical Engineering, Blekinge Institute of Technology 2. PREVIOUS POSITIONS 2014-2018, Case Manager, Läkare Utan Gränser (Médecins Sans Frontières / MSF Sweden). 2010-2014, Associate Senior Lecturer and Associate Professor (Docent). Head of KARLSKRONA, Subject, Innovation Engineering, Department of Design Sciences, Lund NOVEMBER 5, 2018 University, Faculty of Engineering (LTH), Lund, Sweden. __________________________ 2009-2010, Research Associate and Associate Professor, Division of Functional Product Development, Luleå University of Technology, Luleå, Sweden. NAME Andreas Larsson 2008-2009, Research Associate and Assistant Professor, Division of Functional Product Development, Luleå University of Technology, Luleå, Sweden. DATE OF BIRTH 2008, Visiting Scholar, Center for Design Research, Stanford University, September 26, 1976 Stanford, CA, USA. ADDRESS 2007-2008, Project Leader and Assistant Professor, Division of Functional Styrmansgatan 38 Product Development, Luleå University of Technology, Luleå, Sweden. 371 36 Karlskrona 2006-2007, Research Fellow, Hosei University IT Research Center, Tokyo, Japan. Sweden 2006, Project Coordinator, Office of External Relations, Luleå University of PHONE Technology, Luleå, Sweden. +46 70 332 18 74 2005-2007, Researcher, Division of Computer Aided Design, Luleå University of Technology, Luleå, Sweden. E-MAIL [email protected] 2004, Research Fellow, BAE Systems Advanced Technology Center, Bristol, UK. 2001-2005, PhD Student within the Polhem Laboratory, a VINNOVA Competence Centre in Integrated Product Development, Division of Computer Aided Design, Luleå University of Technology, Luleå, Sweden. 3. OTHER (SECONDARY EMPLOYMENT) 2014-, Innovation Advisor, Läkare Utan Gränser (Médecins Sans Frontières / MSF Sweden). 2014-2018, CEO, FLIKK, Karlskrona, Sweden. 2014-2017, Partner, Value Innovation R&D, Karlskrona, Sweden. 2012-2013, Co-founder, Rimfrost Design AB, Lund, Sweden. 2009-2014, Global Foresight Scholar, Center for Foresight & Innovation, Stanford University, Stanford, CA, USA. 2007-2008, Research Manager, Designtech Innovative Project Solutions, Luleå, Sweden. 1996-2010, CEO, Fusemode, Karlskrona/Luleå, Sweden. 4. UNIVERSITY EXAMINA 2005, Ph.D. in Computer Aided Design, Luleå University of Technology, Luleå, Sweden. Thesis: “Engineering Know-Who: Why Social Connectedness Matters to Global Design Teams”. ISSN 1402-1544 / ISRN LTU-DT--05/19--SE / NR 2005:19. (1/17) CURRICULUM VITAE: ANDREAS LARSSON NOVEMBER 5, 2018 2002, Tech.Lic. in Computer Aided Design, Luleå University of Technology, Luleå, Sweden. Thesis: “Socio-Technical Aspects of Distributed Collaborative Engineering”. ISSN 1402-1757 / ISRN LTU-LIC--02/36--SE / NR 2002:36. 2000, M.Sc. in Human Work Science with Emphasis on Computer Science, Blekinge Institute of Technology, Ronneby, Sweden. 1999, B.Sc. in Human Work Science with Emphasis on Computer Science, Blekinge Institute of Technology, Ronneby, Sweden. 5. EVALUATIONS OF SCIENTIFIC EXCELLENCE 2016, Evaluation for the Associate Professor position (Universitetslektor) in Mechanical Engineering at BTH. Performed by Professor Tim McAloone, Technical University of Denmark, Kgs. Lyngby, Denmark. 2010, Evaluation for the Associate Professor position (Bitr. Universitetslektor) in Innovation Engineering at LTH. Performed by Professor Mats Magnusson, Royal Institute of Technology, Stockholm, Sweden and Professor Hans Johannesson, Chalmers University of Technology, Göteborg, Sweden. 2009, Evaluation for the Associate Professor (Docent) title in Functional Product Development at LTU. Performed by Professor Amaresh Chakrabarti, Centre for Product Design and Manufacturing, Indian Institute of Science, Bangalore, India, and Professor Hans Johannesson, Division of Product Development, Chalmers University of Technology, Göteborg, Sweden. 2008, Evaluation for the position of Research Associate in Functional Product Development. Performed by Professor Staffan Sunnersjö, School of Engineering, Jönköping University, Jönköping, Sweden. 6. GRANTED FUNDING APPLICATIONS Research Council Grants 2017, VINNOVA, ”MerSam: Meritvärde av samverkansskicklighet”, 2-year, 284 KSEK project. AL contributed to the proposal strategy and writing. 2017, VINNOVA,”PAUS: Personrörlighet för akademin med utbildningsfokus och studentmedverkan”, 3-year, 964 KSEK project. AL contributed to the proposal strategy and writing. 2017, VINNOVA, “SPETS: Strategiska partnerskap för effektiv och transparent samverkan”, 3-year, 800 KSEK project. AL contributed to the proposal strategy and writing. 2013, VINNOVA, PIEp Innovation Pilots, a one-year, 2 MSEK project exploiting research results through the deployment of student innovation pilots in companies. AL contributed to the proposal strategy and writing. 2012, VINNOVA, PIEp Innovation Pilots, a one-year, 2 MSEK project exploiting research results through the deployment of student innovation pilots in companies. AL contributed to the proposal strategy and writing. 2012, VINNOVA, Metodanvändning i produktframtagning: möjligheter, utmaningar och förutsättningar i svensk industri, a one-year, 600 kSEK project within the VINNOVA Innovativ produktframtagning programme focusing on the dissemination of design methods in industry. AL was a co-author of the proposal. 2012, VINNOVA, Agile User Experience Design for Product-Service Systems, a one-year, 364 kSEK project within the VINNOVA Innovativ produktframtagning programme focusing on exploring the applicability of agile methods in Product- Service System design. AL wrote the complete proposal. 2012, VINNOVA, Lead-User Driven Quality and Efficiency Development in Elderly Care with the Help of Network Cameras, a one-year 1,6 MSEK project within the VINNOVA Öppen innovation och spetsanvändare. AL was a co-author of the (2/17) CURRICULUM VITAE: ANDREAS LARSSON NOVEMBER 5, 2018 proposal. 2009, Fuel Efficient Transmission Technology, a four-year, 18 MSEK project within the VINNOVA FFI (Fordonsstrategisk Forskning och Innovation) programme. AL contributed to the knowledge engineering parts of the proposal. 2008, Teams for Heterogeneous Innovation Knowledge, a four-year, 15 MSEK project within the Swedish Foundation for Strategic Research’s (SSF) ProViking 2 programme. AL contributed to the strategies concerning needs establishment, multidisciplinary team-based collaboration, and effective knowledge sharing in design teams. 2006, Faste Laboratory VINN Excellence Centre for Functional Product Innovation, Luleå University of Technology, 240 MSEK over ten years. AL was a major contributor to, and the coordinator of, the proposal. AL was also one of the participants in the presentation for the external review board at VINNOVA in April, 2006. EU, foundations, and other grants 2018, Region Blekinge, ”Förinkubator BTH + BBI”, 2,5-year, 796 KSEK project. AL wrote the complete proposal. 2012, PIEp, Industriellt nyttiggörande av designmetodik, a one-year 300 kSEK project. AL wrote the complete proposal. 2011, PIEp, Innovation at the Base of the Pyramid, a two-year 500 kSEK project. AL was a co-author of the proposal. 2010, Immersive Workshops for Radical Innovation Capability, 300 kSEK from IMIT (IMIT P5655) for a joint research project with Stanford University. AL was the main contributor to the proposal. 2009, Redesigning Innovation. 1 MSEK from the Kempe Foundations (JCK-2902) to Luleå University of Technology for a joint research project with Stanford University. AL was the main contributor to, and the coordinator of, the proposal. 2009, CRESCENDO, Collaborative & Robust Engineering using Simulation Capability Enabling Next Design Optimisation: a three-year EC FP7 project within aeronautics, bringing 6.5 MSEK to Luleå University of Technology. AL contributed to the development of the proposed capabilities and work package descriptions, and was the LTU project leader, leading LTUs efforts in three work packages during 2009-2010. 2008, Education for Product Innovation. 0.5 MSEK from PIEp. AL contributed to the proposal and took part in the research work. 2006, Research fellowship grant for a 3-month research visit to Hosei University, Tokyo, Japan. The host university covered costs for travel and accomodation. Approx. 100 kSEK. 2005, Participatory Product Innovation. 4.2 MSEK from the Kempe Foundations (JCK-2506) to Luleå University of Technology for a joint research project with Stanford University. AL was the main contributor to, and the coordinator of, the proposal. 2004, The Experiment Studio. 11.5 MSEK from the Kempe Foundations and the Wallenberg Foundation. AL was a major contributor to the proposal. 2004, Design for Wellbeing & Product Design. Luleå University of Technology, 1 MSEK. AL was a major contributor to the proposal and the development of the Design for Wellbeing framework. (3/17) CURRICULUM VITAE: ANDREAS LARSSON NOVEMBER 5, 2018 7. JOURNAL REVIEW ASSIGNMENTS 2013, Journal of Computer Supported Cooperative Work. One occasion. 2012-2013, Journal of Cleaner Production. Two occasions. 2012, Creativity and Innovation Management. One occasion. 2008-2010, Journal of Cases on Information Technology, ad-hoc reviewer. Two occasions. 2006, Journal of Computer Supported Cooperative Work. One occasion. 8. CONFERENCE COMMITTEE ASSIGNMENTS 2014, International Conference on Engineering Design (UD2014), June 16-18, 2014, Lund, Sweden. AL was a Scientific Committee Co-Chair. 2013, 19th International Conference on Engineering Design (ICED’13), August 19-22,