DOCSLIB.ORG

South Coast Air Quality Management District 21865 Copley Drive, Diamond Bar, CA 91765-4178 • (909) 396-2000 •

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
South Coast Air Quality Management District 21865 Copley Drive, Diamond Bar, CA 91765-4178 • (909) 396-2000 • South Coast Air Quality Management District 21865 Copley Drive, Diamond Bar, CA 91765-4178 • (909) 396-2000 • www.aqmd.gov March 31 , 2021 Roberto Puga Principal of Trustee Vernon Environmental Response Trust (ID 193552) 2700 S. Indiana Street Vernon, CA 90058 SUBJECT: Administrative RECLAIM/Title V Facility Permit Revision: Change of Ownership Dear Mr. Puga: Enclosed is the revised RECLAIM/Title V Facility Permit for Vernon Environmental Response Trust located at 2700 S. Indiana Street, Vernon, CA reflecting a change of ownership/operator of the facility as shown in the table below and includes Administrative Permit Revisions for Section D, Section I, Section K, Appendix A, and Appendix B. Facility Name Facility Facility Location ID Address 2700 S. Indiana St., Previous Exide Technologies, LLC 124838 Vernon, CA 90058 Vernon Environmental Response 2700 S. Indiana St., New 193552 Trust Vernon, CA 90058 This change of ownership/operator was processed under AIN 627472 and involved changing all the permit sections of the RECLAIM/Title V Facility Permit to reflect the new facility name, ID number, responsible official and contact person. Section D: Facility Description and Equipment Specific Conditions New Previous Application Application Equipment Description Number Number Remove Facility Condition -- -- -- No. F67.2 Add Facility Condition No. -- -- -- F67.3 627459 598313 Floor Sweep, HEP A Remove Condition No. ('/eani11J! the air that Jtt breathe... Mr. Roberto Puga -2- March 3 1, 202 1 New Previous Application Application Equipment Description Number Number Vacuum E448.15 and update rule tag Floor Sweep, HEP A Remove Condition No. 627460 598314 Vacuum E448.15 and update rule tag Floor Sweep, HEP A Remove Condition No. 627461 598315 Vacuum E448.15 and update rule tag E147: R219 Refrigeration Removed from facility and -- -- Units permit E148: R219 Cleaning Removed from facility and -- -- Equipment permit Inactivated per Form 200-C; -- 374197 D97, C98 removed from permit D58-D69, D74-D96, Inactivated per Form 200-C; -- 374247 D152-D155 removed from permit Inactivated per Form 200-C; -- 496419 C162, C163, D164 removed from permit Inactivated per Form 200-C; -- 501056 Cl 79, C182 removed from permit Inactivated per Form 200-C; -- 517319 C185 removed from permit Inactivated per Form 200-C; 558210 C193 -- removed from permit Inactivated per Form 200-C; -- 558211 C194 removed from permit Inactivated per Form 200-C; -- 578643 C46, S140, C196 removed from permit Inactivated per Form 200-C; 598317 C2 11 -- removed from permit Section I: Compliance Plans & Schedule New Application Previous Application Equipment Description Number Number Rule 1420.1 627467 580051 -- Compliance Plan Rule 1420.1 627468 585141 -- Compliance Plan Rule 1420.l(p)(2) 627471 R-605703 -- Compliance Plan Equipment List Summary Current Previous Device Appl. Permit Permit Equipment Description Appl. No. ID No. No. No. 627454 G64771 501062 G14044 C181 Floor Sweep, Walk Behind 627455 G64792 587370 G46618 C207 Floor Sweep, Walk Behind 627457 G64793 520477 G20769 C190 Building Enclosure, Baghouse Area 0178 Truck Washing Station 627458 G64794 591485 G49407 C180 Wash Station Enclosure 627459 G64795 598313 G49403 C208 Floor Sweep, HEPA Vacuum 627460 G64796 598314 G49404 C209 Floor Sweep, HEPA Vacuum 627461 G64797 598315 G49405 C210 Floor Sweep, HEPA Vacuum C38 Dust Collector 627462 G64798 520575 G20722 C186 Dust Collector S187 Stack C39 Dust Collector 627463 G64799 520577 G20761 C188 Dust Collector S189 Stack C159 Cyclone C160 Central Vacuum System A Baghouse 0161 Floor Sweep 627464 G64800 546549 G45399 C48 Baghouse C192 Dust Collector S142 Stack C156 Baghouse No. 1 C200 Dust Collector 627465 G64801 558214 G45402 C157 Baghouse No. 2 C201 Dust Collector S158 Stack C47 Baghouse 627466 G64802 578644 G46617 C195 Dust Collector Current Previous Device Appl. Permit Permit Equipment Description Appl. No. ID No. No. No. S141 Stack Rule 1420.1 Compliance Plan - Closure 627467 -- 580051 -- -- Plan Rule 1420.1 Compliance Plan - 627468 -- 585141 -- -- Ambient Air Sampling Monitors and Wind Station Compliance Plan Rule 1420. 1 Compliance Plan - Closure 627471 -- R-605703 -- -- Implementation Plan Mr. Roberto Puga -3- March 31 , 2021 Section K: Title V Administration This section has been updated to include current applicable rules and requirements. Appendix A: NOx and Sox Emitting Equipment Exempt from Written Permit Equipment Description Lab Equipment Equipment has been removed from facility Please review the enclosed permit carefully. Also enclosed is a summary of the equipment list with the previous and current application and permit numbers. Effective upon receipt, the enclosed permit replaces in its entirety the previous RECLAIM/Title V Facility Permit issued to Exide Technologies, LLC under Facility ID 124838. Appendix B: Rule Emission Limits This section has been updated to include current applicable rules and requirements. The operation of your facility is bound by the conditions and/or requirements stated in the Facility Permit to Operate. If you determine that there are administrative errors, or if you have any questions concerning changes to your permit, please contact Travis Rohde, Air Quality Engineer, (909) 396-2224 or [email protected] within 30 days of the receipt of your permit. Very truly yours, Thomas G. Liebel Senior Engineering Manager Engineering and Permitting TGL: AS: MP: TR cc: (w/enclosure) Shelia Tsai, U.S. EPA (via cdx.epa.gov) Scott Caso, Sr. Enforcement Manager - Compliance Title V /RECLAIM Central File AIN 627472 (TV Adrnin Revision) South Coast Air Quality Management District Title Page 2 t 865 Copley Drive, Diamond Bar, CA 91765-4 t 78 Facility ID: 193 552 Revision #: 4 7 Date: March 31 , 2021 FACILITY PERMIT TO OPERATE VERNON ENVIRONMENTAL RESPONSE TRUST 2700 S INDIANA ST VERNON, CA 90058 NOTICE IN ACCORDANCE WITH RULE 206, THIS PERMIT TO OPERATE OR A COPY THEREOF MUST BE KEPT AT THE LOCATION FOR WHICH IT IS ISSUED. THIS PERMIT DOES NOT AUTHORIZE THE EMISSION OF AIR CONTAMINANTS IN EXCESS OF THOSE ALLOWED BY DIVISION 26 OF THE HEALTH AND SAFETY CODE OF THE ST A TE OF CALIFORNIA OR THE RULES OF THE SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT. THIS PERMIT SHALL NOT BE CONSTRUED AS PERMISSION TO VIOLATE EXISTING LAWS, ORDINANCES, REGULATIONS OR STATUTES OF ANY OTHER FEDERAL, STATE OR LOCAL GOVERNMENTAL AGENCIES. Wayne Nastri Executive Officer By--'-=-=-'--'--=-<£--"''--#-~ ,~ Jason Aspell y Acting Deputy Executive Officer Engineering and Permitting South Coast Air Quality Management District 21865 Copley Drive, Diamond Bar, CA 91765-4178 Table of Content Facili ty ID: 193552 Revision #: 47 FACILITY PERMIT TO OPERATE VERNON ENVIRONMENTAL RESPONSE TRUST TABLE OF CONTENTS Section Description Revision# Date Issued A Facility Information 7 03/31/2021 B RECLAIM Annual Emission Allocation 26 03/31/2021 c Facility Plot Plan TO BE DEVELOPED D Facility Description and Equipment 10 03/31/2021 Specific Conditions E Administrative Conditions 3 03/31/2021 F RECLAIM Monitoring and Source Testinf 3 03/31/2021 Requirements G Recordkeeping and Reporting 3 03/31/2021 Requirements for RECLAIM Sources H Permit To Construct and Temporary 17 03/31/2021 Permit to Operate I Compliance Plans & Schedules 10 03/31/2021 J Air Toxics 3 03/31/2021 K Title V Administration 3 03/31/2021 Appendix A NOx and SOx Emitting Equipment Exempt 3 03/31/2021 From Written Permit Pursuant to Rule 219 B Rule Emission Limits 3 03/31/2021 South Coast Air Quality Management District Section A Page: I 21865 Copley Drive, Diamond Bar, CA 91765-4178 Facility ID: 193552 Revision #: 7 Date: March 3 1, 202 1 FACILITY PERMIT TO OPERATE VERNON ENVIRONMENTAL RESPONSE TRUST SECTION A: FACILITY INFORMATION LEGAL OWNER &/OR OPERATOR: VERNON ENVIRONMENTAL RESPONSE TRUS1 LEGAL OPERATOR (if different than owner): EQUIPMENT LOCATION: 2700 S INDIANA ST VERNON, CA 90058 MAILING ADDRESS: 2700 S INDIANA ST VERNON, CA 90058 RESPONSIBLE OFFICIAL: ROBERTO PUGA TITLE: PRINCIPAL OF TRUSTEE TELEPHONE NUMBER: (714) 863-0484 CONTACT PERSON: ROBERTO PUGA TITLE: PRINCIPAL OF TRUSTEE TELEPHONE NUMBER: (7 14) 863-0484 TITLE V PERMIT ISSUED: May 26, 20 17 TITLE V PERMIT EXPIRATION DATE: May 25, 2022 TITLE V RECLAIM YES NOx: YES SOx: YES CYCLE: 1 ZONE: COASTAL South Coast Air Quality Management District 21865 Copley Drive, Diamond Bar, CA 91765-41 78 Section B Page: I Facility ID: 193552 Revision #: 26 FACILITY PERMIT TO OPERATE VERNON ENVIRONMENTAL RESPONSE TRUST SECTION B: RECLAIM ANNUAL EMISSION ALLOCATION The annual allocation of RECLAIM Trading Credits (RTCs) for this facility is calculated pursuant to Rule 2002. Total emission shall not exceed such annual allocations unless the operator obtains RTCs corresponding to the facility's increased emissions in compliance with Rules 2005 and 2007. The level of Starting Allocation plus Non-Tradable Credits used to determine compliance with Rule 2005(c)(4) and applicability of Rule 2005(e) - Trading Zone Restrictions is listed on the last page of this Section. The following table lists the annual allocations that were issued to this facility and the amounts of RTCs held by this facility on the day of printing this Section. RECLAIM POLLUTANT ANNUAL ALLOCATION (POUNDS) RTC RTC Holding Non-Tradablt . YearE d B egm n Zone Initially as of Non-Usable (month/year) Allocated 03/31/2021 RTCs (pounds) (pounds) Footnotes: 1. This number may change due to pending trades, emi ssions reported under Quarterly Certificati on of Emissions Report (QCER) and Annual Permit Emission Program (APEP) Report required pursuant to Rule 2004, or deductions made pursuant to Rule 20\0(b). The most recent total RTC informati on can be obtained from the Distri ct's RTC Listing. 2. The use of such credits is subj ect to restricti ons set fo rth in paragraph of Rul e 2002. South Coast Air Quality Management District Section B Page: 2 21865 Copley Drive, Diamond Bar, CA 91765-4178 Facility ID: 193 552 Revision #: 26 n~t,.- March 3 1 202 1 FACILITY PERMIT TO OPERATE VERNON ENVIRONMENTAL RESPONSE TRUST SECTION B: RECLAIM ANNUAL EMISSION ALLOCATION The annual allocation of RECLAIM Trading Credits (RTCs) for this facility is calculated pursuant to Rule 2002.
Load more

Recommended publications
  • NIGP Commodity Code List
    NIGP Commodity Code List ABRASIVES 005 05 Abrasive Equipment and Tools 005 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 005 21 Abrasives, Sandblasting, Metal 005 28 Abrasives, Sandblasting (Other than Metal) 005 42 Abrasives, Solid: Wheels, Stones, etc. 005 56 Abrasives, Tumbling (Wheel) 005 63 Grinding and Polishing Compounds: Carborundum, Diamond, etc. (For Valve Grinding Compounds See Class 075) 005 70 Pumice Stone 005 75 Recycled Abrasives Products and Supplies 005 84 Steel Wool, Aluminum Wool, Copper Wool, and Lead Wool ACOUSTICAL TILE, INSULATING MATERIALS, AND SUPPLIES 010 05 Acoustical Tile, All Types (Including Recycled Types) 010 08 Acoustical Tile Accessories: Channels, Grids, Mounting Hardware, Rods, Runners, Suspension Brackets, Tees, Wall Angles, and Wires 010 09 Acoustical Tile Insulation 010 11 Adhesives and Cements, Acoustical Tile 010 14 Adhesives and Cements, Insulation 010 17 Aluminum Foil, etc. 010 30 Bands, Clips, and Wires (For Pipe Insulation) 010 38 Clips, Pins, etc. (For Duct Insulation) 010 41 Cork: Blocks, Boards, Sheets, etc. 010 45 Exterior Insulation and Finish Systems 010 53 Fiberglass: Batts, Blankets and Rolls 010 56 Foam Glass: Blocks, Sheets, etc. 010 57 Foam-in-Place Insulation: Phenolic, Urethane, etc. 010 59 Foam Plastics: Blocks, Boards, Sheets, etc. 010 62 Insulation, Interior 010 63 Insulation, Blown Type 010 64 Insulation, Loose Fill 010 65 Jacketing (For Insulation): Canvas, Osnaburg, etc. 010 70 Magnesia: Blocks, Sheets, etc. 010 72 Mineral Wool: Blankets, Blocks, Boards 010 75 Paints, Primers, Sealers, etc. (For Insulation) 010 76 Paper Type Insulation Material (Cellulose, etc.) 010 78 Pipe and Tubing Insulation, All Types 010 81 Preformed Insulation, All Types (For Ells, Tees, Valves, etc.) 010 83 Recycled Insulation Materials and Supplies, All Types 010 84 Rubber Insulation ADDRESSING, COPYING, MIMEOGRAPH, AND SPIRIT DUPLICATING MACHINE SUPPLIES: CHEMICALS, INKS, PAPER, ETC.
    [Show full text]
  • Design of an Eeg System to Record Tms Evoked Potentials Design of an Electroencephalography System to Record
    DESIGN OF AN EEG SYSTEM TO RECORD TMS EVOKED POTENTIALS DESIGN OF AN ELECTROENCEPHALOGRAPHY SYSTEM TO RECORD TRANSCRANIAL MAGNETIC STIMULATION EVOKED POTENTIALS '\.., By MARK ARCHAMBEAULT, B.ENG.M. A Thesis Submitted to the School of Graduate Studies in Partial Fulfillment of the Requirements for the Degree Master of Applied Science McMaster University © Copyright by Mark Archambeault, August 2007 M.A.Sc. Thesis - M. Archambeault McMaster University - Electrical and Conymter Engineering Master of Applied Science (2007) McMaster University (Electrical Engineering) Hamilton, Ontario TITLE: Design of an Electroencephalography System to Record Transcranial Magnetic Stimulation Evoked Potentials AUTHOR: Mark Archambeault, B.Eng.M. (McMaster University) SUPERVISOR: Dr. H. de Bruin NUMBEROFPAGES:xv, 106 11 M.A.Sc. Thesis - M. Archambeault McMaster University - Electrical and Conmuter Engineering Abstract The purpose of this thesis was to design, build and test a prototype artifact suppressing electroencephalogram data acquisition system (AS-EEG-DAQ-S) to collect electroencephalogram (EEG) evoked potential (EP) data during repetitive transcranial magnetic stimulation (rTMS) without the EEG signal being masked by transcranial magnetic stimulation (TMS) artifact. A functional AS-EEG-DAQ-S capable of blocking TMS artifact would provide for the first time a quantitative measurement system to assist in optimal TMS coil positioning during the rTMS treatment of depression, an alternative to electroconvulsive therapy (ECT). This thesis provides the details for an AS-EEG­ DAQ-S. Preliminary TMS EP results on a human subject were collected. Results showed transcallosal conduction times of 12ms to 31ms, which are consistent with those predicted and collected by other researchers in the TMS field. The first portion of this work provides electrode heating data for modem rTMS paradigms for the recording ofEEG during rTMS.
    [Show full text]
  • January 1942
    V 40 I.* JANUARY 1942 of . eng!rieering and manufacture radio communication, indLstrial applications eectjç. AL U. S. FDREST SERVICE AuToriAtIL: 111.1 STATION OPERATING IN 30-4C M R 'IC IC -1 t 'NAP' - *".4tOk ' V - 7 - . , `1.4 4, rf. 4,0". - - low - 411r..-t 441V- 4 - - 17174 'w,04016 " - , - 4 (7-- 1 s 1.4 ste , 1°' leb doesn the e tbodyngs tell me is an ideal source for transformers to specifications With improvements in materials, structural design, and production methods, UTC is pro- ducing, today, transformers which even a year ago would have been considered impossible. As a typ cal example of such development is a transformer recently supplied to a customer for one cycle operation having the following characteristics: Primary impedance IO ohms. Impedance ratio 75,000 : I. Secondary inductance 250,000 Hys. Self- resonant point above 7 cycles. Weight under 8 pounds. In additicn to t4,ese difficult characteristics, this unit operates at -160 DB signal level and hum shielding was developed to provide negligible hum pick -up to signal ratio. MAY WE ASSIST Y OU IN YOUR PROBLEM? The same design experience and engineering ingenuity shown in the above example can be applied to your application. May we have an opportunity to cooperate? 150 VARICK STREET EXPORT DIVI SiO1`: i00 YARICK STREET NEW YORK, N. Y. S: AR AB" electronics A McCRAW-HILL PUBLICATION CONTENTS-JANUARY, 1942 FOREST SERVICE RADIO Cover A field communication station of the U. S. Forest Service. Extensive use is made of radio in patrolling the forests and fighting Tres 30 -40 MC MOBILE RECEIVER, KEITH HENNEY by H.
    [Show full text]
  • Audio/Visual Device Technical Manual
    Electrical Geodesics, Inc. Audio/Visual Device Technical Manual Audio/Visual Device Technical Manual Ell ectttrii call Geodesii cs,,, II nc... Riverfront Research Park 1600 Millrace Drive, Suite 307 Eugene, OR 97403 [email protected] www.egi.com Audio/Visual Device Technical Manual S-MAN-200-AV-001 May 7, 2007 Electrical Geodesics makes no warranty or representation, either express or implied, with respect to this manual, its quality, accuracy, merchantability, or fitness for a particular purpose. In no event will Electrical Geodesics be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or inaccuracy in this manual, even if advised of the possibility of such damage. Copyright 2007 by Electrical Geodesics, Inc. All rights reserved. CONTENTS List of Figures vii List of Tables ix Preface xi Related Manuals . xi About This Manual . xv Troubleshooting and Support . xvi chapter 1 Technical Overview 17 When to Use the AV Device . 17 Overview of AV Device Operations . 18 AV Device Package . 19 AV Device Features . 22 Basic Event Timing Theory . 24 chapter 2 Visual-Stimulus Testing 29 General Considerations . 29 Hardware Configuration . 30 Positioning the Photocell Holder . 33 Verifying AV Device Functionality . 41 Test Instructions . 41 chapter 3 Auditory-Stimulus Testing 45 General Considerations . 45 Hardware Configuration . 46 Software Configuration . 50 Verifying AV Device Functionality . 51 Test Instructions . 52 Audio/Visual Device Technical Manual S-MAN-200-AV-001 • May 7, 2007 v Contents chapter 4 Event Timing Tester 55 Event Timing Tester Interface . 56 Running the Event Timing Tester . 58 Analysis of Results . 59 Text Output . 62 chapter 5 Troubleshooting 63 General Troubleshooting .
    [Show full text]
  • HEALTH-ANNEX 5 Code Description Part-No. Qty. 02-05-00001
    HEALTH-ANNEX 5 Code Description Part-no. Qty. EQUIPMENT: ECG (ELECTRO CARDIO 02-05-00001 GRAPHIC ) MODEL: 5403 COMPANY NAME :NIHON COHDEN JAPAN QUINTITY: 78 SITE : ALL GOVERNERATES Heat stylus TLS-100 1004950171B 600 Patient Cable BJ-261D 5570383 300 Limb electrode for a duts 4 Pcs/set 5030003 600 Limb electrode strap for a duts 4Pcs/set 5030021 600 Chest electrode for a duts 6 Pcs/set 5030378 300 Worm wheel Assembly 2144-000103 60 Dc motor for chart LB32-KS 2803-000309 30 Magnetic sensor, chart speed detect PF-2K-02 30 Bush button start, check stop 2124-000808 60 All-Channel sensitivity control unit board . UP-4250 30 Control unit A assembly UP-4065 30 Per Amplifier mother board unit assembly (UP- 4241) 9406713 30 120 Regulator unit Circuit board assembly (UP- 4242) 9424214 30 11.4 Regulator unit cct Maub Amplifier (OL- 501E) 9424319 30 Transport unit cct borard (UP-4252) 9425238 30 Chart speed selection unit (UP-4253) 9425318 30 Pre Amplifier Unit cct (UP-4248) 9424827 30 Input Unit cct board (UP-4247A) 9424738 30 Main Amplifier cct board (UP-4245) 9424524 60 Dc-Dc converter unit cct board(UP-4241) Transformer , 3-293, power 9406713 30 Board Up 4232 30 Warmer Gear A144-008621 30 Bord Up-4244 D.C PC Conr 30 Warm wheel 165 02-05-00002 EQUIPMENT: electrocardiograph machine Model: Cardiofax 5151 COMPANY NAME: NIHON KOHDEN, Japan QUANTITY INSTALLED:300 Stylus 450 Patient Cable 300 Electrode straps 1500 Limb Electrode 1500 Transistor 2SC2270 300 Transistor 2SA11020 300 Transistor 2SD355 750 Transistor 2SB525 750 1mV Switch 225 Run-Stop Switch 225 Chest Electrode 600 Galvanometer 75 Recorder PCB UP-4235 300 Mother PCB UP-4279 150 02-05-00003 EQUIPMENT: Electrocardiograph Machine MODEL:l hp 1504A COMPANY NAME: Hewlett Packard, USA QUANTITY INSTALLED:100 Power Cable.
    [Show full text]
  • Printed and Flexible Systems for Solar Energy Harvesting by Aminy Erin
    Printed and Flexible Systems for Solar Energy Harvesting by Aminy Erin Ostfeld A dissertation submitted in partial satisfaction of the requirements for the degree of Doctor of Philosophy in Engineering - Electrical Engineering and Computer Sciences in the Graduate Division of the University of California, Berkeley Committee in charge: Professor Ana Claudia Arias, Chair Professor Kristofer S.J. Pister Professor Liwei Lin Summer 2016 Printed and Flexible Systems for Solar Energy Harvesting Copyright 2016 by Aminy Erin Ostfeld 1 Abstract Printed and Flexible Systems for Solar Energy Harvesting by Aminy Erin Ostfeld Doctor of Philosophy in Engineering - Electrical Engineering and Computer Sciences University of California, Berkeley Professor Ana Claudia Arias, Chair Emerging wireless and flexible electronic systems such as wearable devices and sensor networks call for a power source that is sustainable, reliable, has high power density, and can be integrated into a flexible package at low cost. These demands can be met using photovoltaic systems, consisting of solar modules for energy harvesting, battery storage to overcome variations in solar module output or load, and often power electronics to regulate voltages and power flows. A great deal of research in recent years has focused on the develop- ment of high-performing materials and architectures for individual components such as solar cells and batteries. However, there remains a need for co-design and integration of these components in order to achieve complete power systems optimized for specific applications. To fabricate these systems, printing techniques are of great interest as they can be performed at low temperatures and high speeds and facilitate customization of the components.
    [Show full text]
  • 2011 Warner Catalog Full.Pdf
    specialized tools for Electrophysiology & Cell Biology Research Planar Lipid Bilayer Perfusion/Microfluidics Oocyte Clamps Patch Clamps Microinjectors Microincubators Micromanipulators Ussing/Diffusion Systems Live Cell Imaging Chambers Temperature Control Systems Electroporation/Transfection Electro- Call to receive other catalogs of interest physiology & Animal, Behavioral Harvard Electro- Molecular Cell Biology Organ & Cell Research Apparatus poration Sample Research Physiology Pumps & Preparation Electrofusion Welcome to the NEW Electrophysiology & Dear Researcher: Warner Instruments is proud to introduce our new Electrophysiology & Cell Biology Catalog. This catalog contains many new products for cell imaging, biosensing, microinjection, and electrophysiology. NEW Products Featured Include: • PLI-100A Picoliter Microinjector - With three positive and two negative pressure capabilities, the versatile PLI-100A is capable of large injections into capillaries or small injections into mammalian nuclei. • BioStat Multi-channel Potentiostat - The BioStat is a software-driven, multi-mode potentiostat that can be used for measurement of pH, reactive oxygen species, and nitric oxide. • Compact Motorized Micromanipulator - Linear amplifiers, used to drive the stepper motors, eliminate stray electromagnetic radiation; reducing noise and resulting in improved patch clamp and electrophysiology performance. • PFC-1 Proflow Chamber - Computer designed gaskets optimized for well-defined, well-controlled shear-flow. • RC-49FS Perfusion Chamber with
    [Show full text]
  • 2020 Supplies and Accessories Product Catalog
    supplies and accessories Helping you help others product catalog WWW.ESTORE.CADWELL.COM 1-800-245-3001 SUPPLIES, Neurodiagnostic and Monitoring Solutions Cadwell designs and supplies leading-edge medical equipment, electrodes, supplies, and accessories. Cadwell has strategic distribution relationships with leading suppliers to provide you with best-in-class products that you use every day. John Cadwell, BSEE, MD designed the first microprocessor-controlled EMG instrument during his medical school residency. In 1979, John and his brother, Carl Cadwell, DDS, formed Cadwell and began selling their device. Since then, Cadwell has been a leader in the development and manufacturing of innovative and reliable instruments for neurophysiology. Cadwell is proud to provide competitive pricing, incredible customer service, same-day shipping options, and www.estore.cadwell.com for your 24/7 shopping convenience. Thank you for choosing Cadwell. 2 www.estore.cadwell.com | phone: 1-800-245-3001 | fax: 844-364-1283 emg 04 Needle & Surface Electrodes 04 17 EMG Accessories 20 Evoked Potential Accessories 22 Electrical Stimulators 24 Ultrasound Accessories IONM 25 Cascade IOMAX Accessories 25 27 Cascade PRO Accessories 30 IONM Accessories, Electrodes & Probes eeg 42 Arc EEG Accessories 42 43 Easy EEG Accessories 46 EEG Electrodes Ambulatory eeg & psg 48 psg 51 PSG Accessories 51 61 PSG Electrodes 63 ApneaTrak® Accessories PREP SUPPLIES 67 VIDEO, POWER, STORAGE, & ACESSORIES 72 Index 78 electrode care 80 Ordering Information 81 www.estore.cadwell.com | phone: 1-800-245-3001 | fax: 844-364-1283 3 EMG | Needle Electrodes Ambu® Neuroline Disposable Monopolar Needle Electrodes with Attached Lead Wires Attached, color-coded 76cm (30 in.) lead wires.
    [Show full text]
  • ABSTRACT YOKUS, MURAT A. Multiplexed Biochemical And
    ABSTRACT YOKUS, MURAT A. Multiplexed Biochemical and Biophysical Sensing Systems for Monitoring Human Physiology. (Under the direction of Dr. Michael A. Daniele and Dr. Tushar Ghosh). Noninvasive access to biochemical biomarkers of human physiology is one of the most challenging tasks in digital health. Today, measurement of the biomarkers of health, wellness, or even diseases requires frequent lab visits for routine blood or urine test panels for full-body screening. Treatment or medical prescription is usually provided based on the measured metrics and patient’s recall of symptoms. However, some of these test panels are still deemed invasive, painful, or inconvenient, and most importantly, they do not offer real-time measurement physiological data. Thus, addressing these challenges requires the development of multiplexed wearable systems that converge biochemical and biophysical sensing functionalities into a single platform and provide real-time measurement of biomarkers of human physiology in daily settings. In this dissertation, we provide wireless, wearable health monitoring systems that can noninvasively and continuously measure the biomarkers of human physiology. The developed systems can measure metabolites (glucose, lactate), pH, and other physical signals (skin temperature, heart rate, and tissue oxygenation) via electrochemical sweat analysis and optical methods. The dissertation introduces the fabrication of flexible sensing arrays, fabrication and characterization of biosensors, design and validation of the wearable electronic systems, and off- body multiplexed analysis of artificial and collected real sweat samples. The developed wearable systems provide multimodal, noninvasive analysis of biomarkers of metabolism and respiration, extending its applications from diet management and performance monitoring to the prolonged assessment of overall health and wellness in ambulatory settings.
    [Show full text]
  • The Experimental Portable EEG/EMG Amplifier
    University of Victoria Faculty of Engineering ELEC 499A Report The Experimental Portable EEG/EMG Amplifier Submitted to Dr Peter Driessen Date: August 1, 2003 From Group 11- EPEEGAG Manj Benning Stephen Boyd Adam Cochrane Derek Uddenberg In partial fulfillment of the requirements of the UVic. B.Eng. degree requirements Dr. Peter F. Driessen Associate Professor Department of Electrical and Computer Engineering University of Victoria Victoria, British Columbia Aug. 1, 2003 Dear Dr. Driessen, Please accept the accompanying ELEC 499A project report entitled “The Experimental Portable EEG/EMG Amplifier”. This report is the result of the ELEC 499A project that was completed in the summer of 2003. Our project group consists of Manj Benning, Stephen Boyd, Adam Cochrane, and Derek Uddenberg. We are all 4th year electrical engineering students at the University of Victoria. During this term, we worked together to design and prototype an inexpensive EEG/EMG amplifier system to be used in research as our ELEC 499A design project. A lot of our project time was spent learning about EEG/EMG signals and technologies. And still more time was spent designing and implementing a prototype module that was eventually presented at the 499A term presentations. The following report will detail the research we performed, the design specifications we implemented, and any future recommendations we have for this project. Upon completion of this project, we feel we have gained valuable skills in signal amplification, noise reduction, circuit synthesis, and project management. These skills are essential in today’s field of electrical engineering. We would like to thank Dr. P. Driessen for offering his supervision and the group advisor, Phil Zeman for being an invaluable source of information and inspiration.
    [Show full text]
  • Analog Front-End Circuits for Massive Parallel 3-D Neural Microsystems
    ANALOG FRONT-END CIRCUITS FOR MASSIVE PARALLEL 3-D NEURAL MICROSYSTEMS by Khaled M. Alashmouny A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (Electrical Engineering) in The University of Michigan 2013 Doctoral Committee: Professor Euisik Yoon, Chair Associate Professor Joshua Berke Professor Khalil Najafi Assistant Professor David Wentzloff Professor Kensall Wise © Khaled M. Alashmouny _______________________________ All rights reserved 2013 All Praise belongs to Allah the Lord of mankind. To my father Mohamed, my mother Laila, and my lovely wife Manar. You always inspire me. ii ACKNOWLEDGMENTS First and foremost, it was a pleasure to work with my research advisor, Professor Euisik Yoon. It was a great experience as I learned and enjoyed a lot his challenges and guidance throughout my Ph.D. I still remember the joy I had when I started working with Prof. Yoon in deeply understanding the basic electrical definition of a ground and trying to predict the behavior of signal transmission within the brain. What I learned the most from him was the exploration of the different aspects in a microsystem design although I end up focusing more onto circuit design. Prof. Yoon always encouraged me to be a proactive person and this has reflected into a lot of the contributions and volunteering activities I decided to make for our lab, the University, and the society. I would like to thank my committee members Dr. Kensall Wise, Dr. Khalil Najafi, Dr. Joshua Berke, and Dr. David Wentzloff for their time and their great suggestions and feedback. Special thanks to Dr.
    [Show full text]
  • Biomedical Equipment Maintenance Technician
    CATALOGUE No. 34-B BIOMEDICAL EQUIPMENT MAINTENANCE TECHNICIAN CATALOGUE N. 34-B BIOMEDICAL EQUIPMENT MAINTENANCE TECHNICIAN Biomedical Equipment Maintenance Technician [email protected] www.elettronicaveneta.com 34B-E Rel. I16 BIOMEDICAL EQUIPMENT MAINTENANCE TECHNICIAN INDEX CATALOGUE N. 34-B GENERAL INTRODUCTION 1 PRESENTATION 2 INTERACTIVE PRACTICAL LABORATORY FOR STUDYING GENERAL AND BIOMEDICAL ELECTRONICS - I.P.E.S. SYSTEM PL INTRODUCTION PL 3 I.P.E.S. INTERACTIVE WORKSTATION PL 4 INFRASTRUCTURE POWER SUPPLY MOD. PS1-PSU/EV PL 9 MODULE HOLDER BOX MOD. BOX/EV PL 9 BIOMEDICAL SIGNAL GENERATOR/ACQUISITION AND FAULT INSERTION UNIT MOD. GAU/EV PL 10 C.B.T. INTERACTIVE MULTIMEDIA SOFTWARE MOD. SW-D-MCMXX/EV MOD. SWBB-BX/EV PL 12 LOCAL NETWORK PL 13 AUDIO-VIDEO-KEYBOARD-MOUSE EXCHANGE SOFTWARE PL 13 CLASS CONTROL SOFTWARE MOD. SW-X/EV PL 15 EL.VE. EDUCATIONAL AUTHOR SOFTWARE PL 16 INDEX ELECTRICITY, MICROPROCESSORS AND MICROCONTROLLERS EXPERIMENT BOARDS DC CIRCUITS AND SYSTEMS MOD. MCM1/EV PL 19 AC CIRCUITS AND SYSTEMS PLMOD. MCM2/EV PL 20 THREE-PHASE CIRCUITS AND SYSTEMS MOD. MCM2T/EV PL 21 ELECTROMAGNETISM MOD. MCM2A/EV PL 22 SEMI-CONDUCTORS MOD. MCM3/EV PL 23 FEATURES AND BIASING OF TRANSISTORS MOD. MCM4/EV PL 24 VOLTAGE AND POWER AMPLIFIER CIRCUITS MOD. MCM5/EV PL 25 OSCILLATOR CIRCUITS MOD. MCM6/EV PL 26 OPERATIONAL AMPLIFIERS MOD. MCM7/EV PL 27 SEQUENTIAL AND COMBINATIONAL LOGIC MOD. MCM8/EV PL 28 ADVANCED LOGIC AND APPLICATIONS MOD. MCM9/EV PL 29 INDUSTRIAL ELECTRONICS MOD. MCM10/EV PL 30 8-BIT MICROPROCESSORS MOD. Z1/EV PL 31 MODULES FOR THE STUDY OF BIOMEDICAL EQUIPMENT TESTING MODULE FOR ACQUISITION AND PROCESSING OF BIOMEDICAL SIGNALS MOD.
    [Show full text]