DOCSLIB.ORG

Planning Sheets TOSCANA

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Planning Sheets TOSCANA planning sheets tOsCana EDITION: August 2013 The new Toscanaroofing sheet CONTENTS edition: august 2013 GENERAL . 3 PRODUCT BENEFITS . 4 ROOFING . 5 UNDERLAYMENT . 6 POSSIBILITIES FOR AIR OUTLET OPENINGS . 7 GENERAL FITTING instructions . 8 PRODUCT information . 12 DETAILS . 13 gutter . 13 ridge and verge . 14 ridge . 15 hip / snOw guard . 16 verge . 17 wIND SUCTION protection . 18 2 general edition: august 2013 composition of fibeR cement Cement Air water Cellulose Reinforcement fibers is the main constituent of fiber cement products; turns fiber cement into facilitates the improves the it acts as a binding agent . a moisture-regulating, combination of all elasticity of the absorb flexural diffusible, and water- components and product and helps tensile forces in the proof building material . ensures further the manufacturing product . it fills the expansion hardening of the process . spaces for freezing material throughout water and prevents the service life . frost damage . general Storage and transport without exception, fiber cement products are delivered ex works with suitable weather protection (e .g . plastic foil) . it is essential that this protection remains in place during transportation and any unroofed storage . pallets must be stored on an even surface! pallets must be transported and stored horizontally in stacks! Warranty any warranty claims made in accordance with warranty certificates can only be enforced if the processing guidelines warranty have been followed and original accessories have been used . eternit cannot be made liable for any damage, soiling or other defects arising from non-observance of the storage or transport instructions . Certification All products have been awarded the CE mark following stringent, independent testing . Product documentation the planning sheet is only an extract from the product information . Further detailed information as well as standard and special solutions can be found on the internet at www .eternit .at You can also find tender documents and detailed technical drawings there to download for further use . the dimensions and designs are based on the following standards: ÖnOrM B 2219 ÖnOrM B 3419 ÖnOrM B 2215 ÖnOrM B 4119 ÖnOrM en 494 ÖnOrM en 1991-1-3 ÖnOrM en 1991-1-4 3 product benefits edition: august 2013 product stormproof benefits Each Toscana roofing sheet is double-fastenened and therefore can withstand all storms. lighTweighT Due to the low weight, there is very little strain to the subconstruction and it is therefore ideal for all kinds of renovation. Extremely robust – rotproof – safe, even in case of heavy snow loads – frostproof Fire behAvior Fiber cement is non-flammable (as per ÖnOrM en 13501-1: class a2-s1, d0) . Fiber cement does not melt and, in case of fire, does not produce any harmful fumes . ENvironmental DECLARATION epd as per isO 14025 toscana roofing sheets from eternit-werke ludwig hatschek ag are recognized as being environmentally compatible and sustainable by an environmental product declaration from the iBu (institut Bauen und umwelt e .v .) . ENvironment Fiber cement is composed of natural raw materials, such as cement and cellulose, that are absolutely harmless ecologically and of no danger to health (no asbestos) . Disposal Fiber cement is considered as "solid mineral waste" (waste key number 31409) and must be disposed of accordingly . Hidden benefits – no drumming effect during rain such as in the case of metal roofs – no electrostatic charging – no disruption of mobile phone networks, radar waves (near airports) 4 ROOFING edition: august 2013 Roof THE ROOF COnstructiOn „A roof over your head“ has many functions and tasks to fulfill. It should provide optimum protection from all climatic influences, while also being subjected to heavy loads and strains due to ever-changing weather conditions. A good roof must therefore be frost-, storm- and rainproof and at times it must also be able to bear a heavy snow load. In all of its various shapes, constructions, systems and materials, it is the roof, and above all the upper boundaries of the building, that due to its form decisively decides the character of the building. And moreover: shapes of roofs, structures and even the roofing material itself determine the appearance of whole villages and districts. Steep roofs are normally to be constructed as ventilated flat roof constructions: – underlayment – ventilated attic area Installing an underlayment is essential for converted attics! Make sure that there are sufficient air inlet openings at the gutter as well as air outlet openings in the area around the ridge and hip! Sufficient thermal insulation of the slanted roof and the ceilings must be taken into account. ÖNORM B 7219, B 7215 and ONR 22219-2 apply to the construction. underlayment Ventilated attic area Depending on the design and the requirements, a difference is A sarking membrane is recommended if there is a danger of wind- made between: driven snow. – a rainproof underlayment – an underlayment for increased rain protection VEnTilated FlaT roof TABLE 01: AIR INLET AND OUTLET OPENINGS IN CM², PER METER OF EAvES DEPENDING ON RAFTER LENGTh rafter length roof pitch roof pitch roof pitch roof pitch roof pitch ≤ 10° > 10° - 15° > 15° - 20° > 20° - 25° > 25° inlet air Outlet air inlet air Outlet air inlet air Outlet air inlet air Outlet air inlet air Outlet air ≤ 5 m 100 120 90 110 80 100 70 90 60 80 > 5 m - 10 m 200 240 180 220 160 200 140 180 120 160 > 10 m - 15 m 300 360 270 330 240 300 210 270 180 240 > 15 m - 20 m 400 480 360 440 320 400 280 360 240 320 > 20 m - 25 m 500 600 450 540 400 480 350 420 300 360 AIR INLET AND OUTLET openings (without numerical proof) 5 roofing edition: august 2013 Underlayment this double-shell roof technology with rear ventilation has many advantages: – protection from water infiltration (ice accumulation, damage to the roof covering) – prevention of wind-driven snow from entering – short, temporary roof during the construction phase – effective prevention of such problems as condensation or heat accumulation – the integrated thermal insulation also helps to save valuable heating energy . ÖnOrM B 3419, ÖnOrM B 2215, and ÖnOrM B 4119 apply to the design . - Underlayment: installation of an underlayment is mandatory for converted lofts and/or if the pitch of the selected roof covering falls below the regulation roof pitch . this is also the case if special climatic or structural conditions are present (e .g . long rafter lengths) . it forms an essential intermediate layer and must be capable of assuming the functions of the main roof, at least temporarily . a sarking membrane (e .g . consisting of plastic sheeting, etc .) is not permitted for loft conversions . - ventilation space: Cold roofs must have aeration at the eaves and appropriate deaeration in the ridge area; they may also require openings in the gable ends for transverse ventilation . On the one hand, roof ventilation solves the problem of residual vapor diffusion; on the other, it achieves thermal separation between the building and the weather skin when used in conjunction with heat insulation . the cold outside air enters at the eaves and sweeps towards the ridge due to the thermal effect . at the same time, it discharges any moisture present via the ridge vent, thereby preventing any condensation on the underside of the roof . - Thermal insulation: the thermal insulation is placed between and beneath the rafters or on exposed shuttering (over-rafter insulation) and should be sufficiently thick . provide for a ventilation space of at least 3 cm above the thermal insulation in the case of diffusion-resistant roofing . depending on the usage/requirement, a vapor retarder or vapor barrier should be installed . the interior wall covering can then be applied, using gypsum plasterboard, wood paneling, etc . 1 rafters 2 timber planking 3 roof or sealing membrane (open or sealed to diffusion) 4 Counter battens 5 support battens 6 toscana roofing sheet 7 thermal insulation Roof construction 6 possibilities for air outlet openings edition: august 2013 ridge and hip an adequate air outlet opening at the ridge and hip is of great significance for functional rear ventilation and building physics . the air outlet openings can be fulfilled with single ventilators and/or with raised ridge or hip formations (particularly in the case of long rafter lengths and low roof pitch) . Aluminum ventilator panel (ventilation cross-section: approx . 50 cm² each . Single ventilator Aluminum ridge and hip roll Ridge with flashing tile and ridge grille (ventilation cross-section: approx . 95 cm²/m per roof side) (ventilation cross-section: see details on page 14) Raised ridge and hip design 7 GENERAL FITTING instructions - Toscana edition: august 2013 DESIGN roof coverings must be designed according to ÖnOrM B 3419, taking water drainage into account . the design of the roof covering must be rainproof . INSPECTION Only professionals are permitted to walk on the roof covering . Walkway grilles or footboards must be attached for carrying out other roof-top maintenance and repair work (e .g . chimney sweeping) . AIR OUTLET OPENING exhaust air exhaust air You must ensure that there are adequate air outlet openings at the ridge and hip, e .g . with ventilators, raised ridge, etc . air intake air intake STORAGE / transport without exception, fiber cement products are delivered ex works with suitable weather protection (e .g . plastic foil) . it is essential that this protection remains in place during transportation and any unroofed storage . pallets must be stored on an even surface! toscana roofing sheets must be transported and stored horizontally in stacks! Installation / ShEET ARRANGEMENT toscana roofing sheets are generally laid as a sharp-edged sheets must be used at the surrounding edges . left-hand covering (from right to left) . in the center, toscana roofing sheets are installed with clipped left-hand corners . toscana roofing sheets with clipped left-hand corners sharp-edged toscana roofing sheets ChALk LINE striking a vertical chalk line is required for installation .
Load more

Recommended publications
  • Palm Oil Research Centre (Ppks) and Agency of Sumatera Plantation Companies (Bks - Pps)
    STUDY OF THE ELEMENTS OF FAÇADE OF COLONIAL BUILDINGS, CASE STUDY: PALM OIL RESEARCH CENTRE (PPKS) AND AGENCY OF SUMATERA PLANTATION COMPANIES (BKS - PPS) Diana Harefa*, Shanty Silitonga; Raimundus Pakpahan Architecture Department, Faculty of Engineering, Catholic University of Saint Thomas, Medan, North Sumatera Email: [email protected] ABSTRACT Dutch plantation expansion in the city of Medan left many historical buildings. The plantation building is a historical legacy that must be preserved. G.H Mulder was one of the architects of the time, with his work on the Palm Oil Research Center (PPKS) and the Sumatra Plantation Cooperation Agency (BKS-PPS). The facade is an inseparable element of the architectural product, which is the first element that we capture visually. This research studied and analyzed the elements of colonial architecture that form the facade of The Plantation Development of the Oil Palm Research Center (PPKS) and the building of the Sumatra Plantation Cooperation Agency (BKS-PPS). The research method used in this study is a qualitative method with variables such as walls, columns, doors, windows, vents, roofs, balcony, and ground floor zones. The study founded that the two estate buildings had the characteristics of the transitional colonial architectural period, accompanied by a grouping of similarities in the elements of the two facade. Despite having the same function, architect, and construction period, the two buildings still have differences in the characteristics in facade elements and the visual quality Keywords: Colonial building, Elements of façade INTRODUCTION is seen at first, the facade also displays the history of human civilization [1]. Medan is a historic city; it was known as Therefore, researchers are interested in Paris Van Sumatra.
    [Show full text]
  • Kalzip® Systems Products and Applications
    Kalzip® systems Products and applications 1 Kalzip GmbH 2020 Kalzip Systems Office building Messchenveld (NL) Profile type 65/400, RAL 9007 Architect: Axes Architecten, Assen Content Kalzip roof and façade systems The future of building 3 Sustainable building 4 Kalzip Products All systems in one view 6 Kalzip Liner roof system 12 Kalzip structural deck system 14 Kalzip Deck roof construction 16 Kalzip low U-value system 20 Kalzip DuoPlus and Kalzip Duo 22 Kalzip roof systems for residentials 26 Kalzip ProDach 30 Kalzip Vario LB roof refurbishment system 34 Kalzip + Foamglas® 40 Kalzip FlexiCon RR 80 42 Kalzip Additive Systeme Kalzip NatureRoof 44 Kalzip AluPlusSolar 48 Kalzip SolarClad 50 Additive systems and materials 52 Colours and surfaces 54 Rollforming 60 System components and accessories 62 Kalzip Service 63 2 Kalzip GmbH 2020 Products & Application Railway station Newport (UK), Profile type: 65/xtail, stucco-embossed Architect: Grimshaw Architects Innovative performance and proven system solutions for creative architectural design Creative people all over the world are opting Kalzip building systems meet the highest cons- for it, to implementable visionary high-tech truction physical and design requirements for architecture with Kalzip. Roofs and facades are the realisation of roofs and facades that are impressively set in scene through puristically functionally inspiring and visually appealing. elegant restraint or as a design element - Kalzip fascinate. creates solitaires, giving every building its own character. The result is buildings that set new Building with Kalzip also means being able to standards and are trend-setting in form and draw on many years of know-how. function.
    [Show full text]
  • ROOF COVERINGS; SKY-LIGHTS; GUTTERS; ROOF-WORKING TOOLS (Coverings of Outer Walls by Plaster Or Other Porous Material E04F 13/00)
    CPC - E04D - 2019.08 E04D ROOF COVERINGS; SKY-LIGHTS; GUTTERS; ROOF-WORKING TOOLS (coverings of outer walls by plaster or other porous material E04F 13/00) Definition statement This place covers: Roof coverings including any similar kind of watertight covering against rain, snow, hail, or the like for other parts of buildings; sky-lights for flat or sloped roofs; roof drainage and gutters; roof-working tools References Limiting references This place does not cover: Coverings of outer walls by plaster of other porous material E04F 13/00 Informative references Attention is drawn to the following places, which may be of interest for search: Solar heat collectors on roofs F24S 20/67 Photovoltaic panels on or for roofs H02S 20/25 E04D 1/00 Roof covering by making use of tiles, slates, shingles, or other small roofing elements (roofing supports {or underlayers} E04D 12/00) Definition statement This place covers: Small roof covering elements, like grooved or vaulted tiles, slates, shingles (E04D 1/02 - E04D 1/22); Special small roof covering elements characterized by their structure or their purpose (E04D 1/24 - E04D 1/30); Fastenings for small roof covering elements and devices for sealing the spaces between small roof covering elements (E04D 1/34 - E04D 1/365). References Limiting references This place does not cover: Roofing supports and under-layers E04D 12/00 Informative references Attention is drawn to the following places, which may be of interest for search: Solar heat collectors in the form of shingles or tiles F24S 20/69 Photovoltaic panels on or for roofs H02S 20/23 Special rules of classification Use E04D 1/00 - E04D 1/36 to classify the additional non-inventive aspects 1 CPC - E04D - 2019.08 E04D 1/02 Grooved or vaulted roofing elements (E04D 1/28, E04D 1/30 take precedence) Definition statement This place covers: Small grooved or vaulted roof covering elements, like Spanish, Roman or Barrel tiles References Limiting references This place does not cover: Roofing elements comprising two or more layers, e.g.
    [Show full text]
  • Design Review District Design Manual 3Rd Edition Revised December 3, 2019 Design Review District Design Manual – 3Rd Edition
    Design Review District Design Manual 3rd Edition Revised December 3, 2019 Design Review District Design Manual – 3rd Edition Table of Contents The Vision for Pella………………………………………………………….……….. 2 Community Development Committee………………………………………………... 2 The Design Review Process…………………………………………………………... 3 Design Assistance…….………………………………………………………………. 5 Pictorial Examples of Commercial Dutch Architecture……………………………… 6 Typical Dutch Commercial Building Elements……………………………………… 12 Pictorial Examples of Typical Dutch Elements……………………………………… 13 Architectural Facades, Exterior Walls and Elevations……………………….……… 15 Gables………………………………………………………………………………… 15 Roofs…………………………………………………………………………………. 15 Shutters………………………………………………………………………………. 16 Attention to Detail……………………………………………………………………. 16 Variety in Design…………………………………………………………………….. 16 Architectural Colors…………………………………………………………………. 16 360 Degree Architecture……………………………………………………………… 17 360 Degree Architecture Example: Applebee’s …………………………………….. 18 Design Parameters for Metal Buildings in Periphery Areas…………………………. 19 Design Parameters for Large Commercial Buildings………………………………… 19 Design Guidelines for Non-Building Features……………………………………….. 21 Cart Corrals ………………………………………………………………………….. 21 Cart Storage ………………………………………………………………………… 22 Dumpster Enclosures…………………………………………………………………. 22 LED Lighting ………………………………………………………………………… 22 Signage Design Parameters…………………………………………………………… 23 Examples of Signage in the CBD District……………………………………………. 24 Examples of Signage in the CUC District……………………………………………. 26 Examples
    [Show full text]
  • The Rural Vernacular Habitat, a Heritage in Our Landscape
    FFuturopauturopa For a new vision of landscape and territory A Council of Europe Magazine no 1 / 2008 – English Landscape Territory Nature The rural vernacular habitat, Culture Heritage a heritage Human beings in our landscape Society Sustainable development Ethics Aesthetic Inhabitants Perception Inspiration Genius loci kg712953_Futuropa.indd 1 25/03/08 15:46:52 n o 1 – 2008 Chief Editors Robert Palmer Director of Culture and Cultural and FFuturopauturopa Natural Heritage of the Council of Europe Daniel Thérond Deputy Director of Culture and Cultural and Natural Heritage of the Council of Europe Editorial Director of publication Maguelonne Dejeant-Pons Gabriella Battani-Dragoni ..............................................................................3 Head of the Cultural Heritage, Landscape and Spatial Planning Presentation Division of the Council of Europe The vernacular rural heritage: from the past to the future With the cooperation of Alison Cardwell, Adminstrator, Franco Sangiorgi ..............................................................................................4 Cultural Heritage, Landscape and Spatial Planning Division Pascale Doré, Assistant, Cultural Rural Vernacular Heritage and Landscape in Europe Heritage, Landscape and Spatial Farms and landscape of the Netherlands: rural vernacular architecture Planning Division of the Low Countries Ellen Van Olst ...........................................................6 Concept and editing Barbara Howes The industrial architecture of the Llobregat valleys in Spain:
    [Show full text]
  • Type-Planned Houses
    Type-planned houses My intertextual study is about very common type of finnish house, better known as”veteran- house” or “type-planned house”. These houses were build after the Second World War and they were one of the key factors in solving the huge housing shortage after the war. Finland ceded most of Finnish Karelia, Salla, and Pechenga to Soviet Union and half a million people had to leave their homes. Over half of the evacuees were agricultural population. They received new farms in Southern Finland as compensation for their losses. The huge rebuilding project was organised by the government, helped by countless organisations. They promised land to war invalids, war widows and veterans with families. Sweden also donated 2000 houses after the war. The most important co-operator was the Finnish Association of Architects, whose members voluntarily and free of charge developed and designed type-planned houses and town plans. File was created for the publication of type- planned house blueprints, building instructions and individual standards. There were dozens of different models of the type-planned houses, but the most common model became the 1,5-storied clapboard house with a saddle roof. These houses spread from the rural Finland to population centres and towns. All in all, around 75.000 veteran’s houses were built during the reconstruction era 1940-1960. After the war Finland had a shortage of everything else, except land, timber and working hands. For example people re-used old nails, straightened them and nailed again and they mixed stones with concrete. For years, the industrial production went to the Soviet Union as war indemnities.
    [Show full text]
  • CWL0059 Project Planning
    GB Project Planning Risk Analysis Maintenance Plan Roof Shovelling Plan Retailer: © CWL 2016-10 This brochure is protected by copyright and may not be copied or reproduced without the written approval of CW Lundberg AB. The prohibition against copying applies to individual images and texts, entire paragraphs and to the document in its entirety. The information herein is subject to changes in construction, design or documentation made after this date. Content PROJECT PLANNING Project Planning RISK ANALYSIS Risk Analysis Risk Assessment Risk Inventorying MAINTENANCE Maintenance Instructions Maintenance Plan/Inspection Protocol ROOF SHOVELLING Roof Shovelling Plan Project Planning Upon Planning The developer shall ensure that a work environment plan is prepared and made available before the building site is established. The plan shall contain those measures that are to be taken in order for the working environment to be satisfactory. The plan must particularly take into account the risks present during construction such as roof work. The work environment plan may contain the requirement that the persons installing roof safety devices have the appropriate training. The work environment must always undergo a risk analysis in order to prevent illness and accidents from occurring at work. Upon Project Planning The property owner is responsible for the correct roof safety equipment being installed. The developer, along with the consultants he engages, shall ensure that the project planning is done in order to create the conditions necessary for a good working environment at and within the building structure, not only when it is being used but also during the construction period. The developer, along with the consultants he engages within their fields, shall create the conditions necessary to end up with a building with as few accident risks and other risks of injury as possible.
    [Show full text]
  • Protruding Saddle Roof Structure of Toraja, Minang and Toba Batak House: Learning from Traditional Structure System
    Protruding Saddle Roof Structure of Toraja, Minang and Toba Batak House: Learning from Traditional Structure System Esti Asih Nurdiah Department of Architecture, Faculty of Civil Engineering and Planning, Petra Christian University, Indonesia [email protected] ABSTRACT Structure system of Nusantara Architecture has been known for its durability. Traditional structure knowledge was passed from generation through folksong, storytelling or old verse. Toraja, Minang, and Toba Batak have similar house roof shape which is gable roof with protruding at the end like buffalo horn. The similarities in structural system need to be elaborate. This paper attempts to seek the structural system of Toraja, Minangkabau and Toba Batak house, especially the roof structure system. The research conducted to discover the similarities of the roof structure system, study the construction and tectonics, and also learn the load transfer. By learning from local knowledge of building structure system, people can learn to build new buildings using local wisdom, instead of only imitate the form. © 2011 12th SENVAR. All rights reserved. Keywords: Structure system, Toraja, Batak Toba, Minang house 1. Introduction Nusantara archipelago has thousands of islands which scattered in Pacific and Indian ocean. Indonesia itself has more than 13,000 islands, inhabited by many tribes with different culture, tradition and architecture. Moreover, the beauty and uniqueness of house form represent as identity for each tribe. Every tribe who lives in different location has different form and shape of house, especially the roof shape. The houses are the symbolic center of a web of customs, social relations, traditional laws, taboos, myths and religion (Dawson & Gillow, 1994:10) Structure system of Nusantara Architecture, which also known as traditional architecture, has been known for its durability.
    [Show full text]
  • Inclined Roof System Trimoterm SNV
    Inclined Roof System Trimoterm SNV Technical Document No. 35 / Version 3.1 / April 2010 CONTENT 1.0 Technical Description of Roof System Trimoterm SNV [1] 1.1 General [1] 1.2 Panel profile [1] 1.3 Panel composition [1] 1.4 Technical data [1] 1.4.1 Basic technical data [1] 1.4.2 Coatings [2] 2.0 Design Procedure [3] 2.1 Panel thickness selection [3] 2.2 Structural design data [3] 2.3 Fixing method [4] 2.4 Snow guards [4] 2.4.1 General [4] 2.4.2 Snow guards arrangement and fixing [4] 2.5 Lightning rods [6] 3.0 Assembly Instructions [6] 3.1 Installation recommendations [6] 3.2 Sealing [9] 3.2.1 Sealing the longitudinal joint between panels [9] 3.2.2 Assurance of roof water-tightness [10] 3.2.3 Water vapour diffusion [11] 3.3 Panel fixing [12] 3.4 Lifting methods [13] 3.5 Installation details [14] 3.5.1 Roof extension detail [14] 3.5.2 Ridge detail [15] 3.5.3 External gutter detail [16] 3.5.4 Valley gutter detail [17] 3.5.5 Snow guard detail [18] 3.5.6 Lightning rods detail [19] 4.0 Packing, Transport and Storage [20] 4.1 Packing [20] 4.2 Transport [20] 4.3 Storage [21] 5.0 Maintenance [21] 5.1 Annual checking of a roof [21] 5.2 General recommendations [21] All rights to alteration reserved. The last versions of documents is available on www.trimo.si 1.0 Technical Description of Roof System Trimoterm SNV 1.1 General Trimoterm SNV roof panels in a standard module width of 1000 mm represent basic Trimo roof system.
    [Show full text]
  • “Keongan” Ventilation Roof on Local Houses in Semarang City Indonesia
    International Journal of Scientific and Research Publications, Volume 6, Issue 12, December 2016 130 ISSN 2250-3153 “Keongan” Ventilation Roof on Local Houses in Semarang City Indonesia Sukawi*, Agung Dwiyanto**, Suzanna Ratih Sari**, Gagoek Hardiman** * Study Program of D3 Architectural Design, Faculty of Engineering, Diponegoro University Semarang, Indonesia ** Department of Architecture, Faculty of Engineering, Diponegoro University Semarang, Indonesia Abstract- Keongan is a kind of roof ventilation usually used in indonesian local houses. In a humid tropical climate, in general, the building is designed with natural ventilation system that maximizes the speed of wind in order to cooling the building structure or reach the achievement of physiological comfort. Some of the building design features in a tropical climate, such as the existence of wide openings, roofs with a slope angle, have a plafond, and maximizing the shades around the building. The density of buildings is one of the factors which affect the principle of micro-climatic conditions and determine the conditions of ventilation and air temperature. Heat symptoms in main cities affected by urban density rather than the size of the city itself, the more dense, the worse the condition of the building ventilation. Architecture of buildings, tried to adapt to the nature and tried to blend with nature. Norms, customs, climate, culture, beliefs and local materials will be given its own color in the development of vernacular architecture. The long journey through trial and error with the local genius, is capable to displaying it’s identity. Several features of houses in Semarang Village include : symmetrical floorplans extends to the rear, circulation straight from front to rear, limasan roof or saddle roof, three openings (doors) on the facade, door consists of two doors, Ornaments eaves (lisplank) on the front facade, the Consul made of iron or wood with the formation of ornamentation, Ornaments on bouven above the door.
    [Show full text]
  • RUUKKI RWS SIBA Brochure 2017
    Original Scandinavian rainwater system Siba Siba Square Contents Siba rainwater systems 3 Measuring 15-16 Siba 4-9 Gutter brackets 18-19 Siba Square 10-11 Gutters 20-23 Materials 12 Angles 24 Technical specifications 13 Downpipes 24-25 Assembly instructions 14-25 Shoes 26 2 ORIGINAL SCANDINAVIAN RAINWATER SYSTEM Siba rainwater systems Rainwater systems not only drain storm water from the Our selection includes gutters, downpipes, gutter roof but they also contribute to the overall look of the brackets and innovative accessories in many sizes and building facade. Siba rainwater systems are a perfect colours. Our product range is available in round and match for all types of roofing including steel roofs, square variant. ceramic, asphalt, shingle, etc. Water is a fierce element; a single drop can break a rock. Siba constitutes a complete system comprising all Siba rainwater systems are therefore made of the best elements required to assemble ideal storm water materials available on the market. Our systems are made drainage system. of top grade Swedish steel. We offer our standardized steel systems in nine colours. Sophisticated and elegant solution for all types of roofs black* metallic graphite graphite* ~ RAL 9005 ~ RAL 9007 ~ RAL 7024 red brick metallic silver* ~ RAL 3009 ~ RAL 8004 ~ RAL 9006 chocolate brown dark brown white ~ RAL 8017 ~ RAL 8019 ~ RAL 9010 * colours available for SIBA Square ORIGINAL SCANDINAVIAN RAINWATER SYSTEM 3 A perfect harmony of aesthetics and functionality Siba Siba rainwater systems are suitable both for family houses and for larger agricultural, industrial and commercial structures. High-quality materials ensure precise finish and long service lifetime.
    [Show full text]
  • LITTLE CHUTE DESIGN MANUAL Adopted by the Village Board on August 26, 2009
    LITTLE CHUTE DESIGN MANUAL Adopted by the Village Board on August 26, 2009 The Vision for Little Chute Creating and retaining the vision of a heritage destination will become a critical challenge of Village of Little Chute government as the Village will become a tourist destination after the authentic, full-scale, working windmill is built in 2010. Working with developers to form new ideas in commercial and housing developments to achieve the character and identity of an established Old World European community while meeting business needs is often a delicate balance. It is the desire of this community to remain strong in its vision by retaining its long term integrity through the reflection of the buildings and signage in our community. With the following design parameters, the Village of Little Chute hopes to lay the groundwork necessary for you to become a working part of our community. Old World European architecture, colors and key building elements will be explained to help you make an informed decision about building anew or updating an existing business or sign in Little Chute. Purpose The purpose of this manual is to preserve, create, and promote the unique charm, atmosphere, quaint, and romantic character, natural beauty and historical aspects of the community. This design review shall relate to the proposed appearance, colors, texture, materials and architectural design of the exterior, including the front, sides, rear and roof of the proposed building as well as any signs, graphics, visual display, outdoor furniture or fixtures. Any new construction, additions, alterations, modifications or repairs to commercial structures or signs in the Central Business District are to be reviewed by the Design Review Board (DRB).
    [Show full text]