SPONSOR ACKNOWLEDGEMENTS

PROMOTION ORGANIZATION

http://www.abcm.org.br/ http://www.pucpr.br/

SPONSORS

http://www.zeiss.com.br/ http://www.vtech-br.com/

https://www.eos.info/en institutorenault.com.br/

https://www.home.sandvik/ http://www.iscardobrasil.com.br/

https://www.bksv.com/ https://www.tescan.com/

embraer.com/

http://www.cnpq.br

http://www.capes.gov.br/

LOCAL COMMITTEE WELCOME

Welcome to Curitiba Dear Colleagues, 24th COBEM Organizing Committee

It is with the great pleasure that we welcome you to Curitiba and the 24th ABCM International Congress of Mechanical Engineering - COBEM, held from 3-8 December 2017, at the Pontifícia Universidade Católica do Paraná, Curitiba, PR, Brazil. COBEM is a comprehensive event, organized every 2 years, which gathers students, engineers and scientists of many different fields that contribute for the advances in mechanical engineering and related fields. People from around world are welcome to participate in the 24th edition of the congress, to discuss important issues such as sustainability, new Ricardo D. Torres Fred L. Amorim manufacturing approaches, thermal and fluid Congress Chair Congress Vice-Chair sciences, numerical modeling among others PUCPR PUCPR important subjects. The occasion constitutes an excellent opportunity for the interaction of the Brazilian community with a selected group of internationally leading scientists. Besides, the meeting also provides students, at early career stage, the privilege of presenting and discussing their works with first-rated scientists. The aim is to provide a relaxed atmosphere to facilitate networking among participants and foster possible future collaborations. The scientific program contemplates the most diverse areas of fundamental and applied mechanical engineering. The Congress is divided in 21 Symposia, Stephan H. Och Paulo Soares which include 12 invited oral contributions, 921 regular Treasurer Program Chair oral contributions and 581 posters. PUCPR PUCPR

On behalf of the Organizing Committee, we would like to thank the intended participants and all of those who have contributed to the organization and success of this event. We wish you all a very prosperous and ABCM Board of Directors 2015 - 2017 inspiring Conference and hope that we have made Professor Sergio Viçosa Möller, UFRGS – President your time in Curitiba the most worthy and personal experience for you and your colleagues. Professor Luís Mauro Moura, PUCPR – Vice-President Professor João Luiz Filgueiras de Azevedo, DCTA/IAE/ALA – Scientific Technical Director

Professor Gherhardt Ribatski, USP-SC - Secretary Director Professor Leonardo Santos de Brito Alves, UFF – Treasurer Director

1 SYMPOSIA COORDINATORS

Carlos A. H. Laurindo - [email protected] AERO - Aerospace Engineering Marcelo Leite Ribeiro - [email protected] William Wolf - [email protected] Adriano Siqueira - [email protected] Paulo Soares - [email protected] BIOE - Bioengineering Rudolf Huebner - [email protected] Ana Paula R. Alves Claro - [email protected] COMB - Combustion and Environmental Rogério Gonçalves dos Santos - [email protected] Engineering Stephan Henning Och - [email protected] Aline Souza de Paula - [email protected] DYNM - Dynamics, Control, Vibrations and Key Fonseca de Lima – [email protected] Acoustics Marcelo Amorim Savi - [email protected] Nilson Barbieri - [email protected] Carlos Alberto de Almeida - [email protected] ENACEM - Education Symposium Luís Mauro Moura - [email protected] Leandro Alcoforado Sphaier - [email protected] ENTS - Energy and Thermal Sciences Luis Mauro Moura - [email protected] Viviana C. Mariani - [email protected] FIVB - Flow Induced Vibration Luis Mauro Moura - [email protected] FLMR - Fluid Mechanics and Rheology Marcelo Souza de Castro - [email protected] FRFS -Fracture, Fatigue, and Structural Integrity Hsu Yang Shang - [email protected] Enio Pedone Bandarra Filho - [email protected] HVAC - Heating, Ventilation, Air-Conditioning Luis César de Carli Turco - [email protected] and Refrigeration Nathan Mendes - [email protected] Álisson Rocha Machado - [email protected] Fred Lacerda Amorim – [email protected] MMEN - Materials and Manufacturing Valter Estevão Beal - [email protected] Engineering Carlos M. Lepienski - [email protected] Giovanni Santos - [email protected] Luciano Mendes - [email protected] MECH - Mechanics and Automation Marcelo Rudek - [email protected] Sadek Absi Alfaro - [email protected] NMMS - Nano and Microfluidic and Micro- Elaine Maria Cardoso- [email protected] Systems Paulo C. Philippi - [email protected] ICONNE - Non–linear Phenomena José Manoel Balthazar - [email protected] NUCE - Nuclear Engineering Irionson Bassani - [email protected] Celso Pupo Pesce - [email protected] OSPE - Offshore and Petroleum Engineering Celso Peres Fernandes - [email protected] PIPV - Pipping and Pressure Vessels Ricardo Bertin - [email protected] Fernando Antonio Forcellini - [email protected] PROD - Product Engineering Luciano Mendes - [email protected] Adriano Todorovic Fabro - [email protected] Alberto C. G. C. Diniz - [email protected] QUSM - Quantification of Uncertainties and Marcela Rodrigues Machado - [email protected] Stochastic Modelling Roberta Lima - [email protected] Rubens Sampaio Filho - [email protected] Alberto Paiva - [email protected] SMST - Smart Materials and Structures Marcelo Amorim Savi - [email protected] Michelle S. Merúvia - [email protected] Eduardo Fancello - [email protected] SOLM - Solid Mechanics João Elias abdalla Filho - [email protected] Márcio Lúcio Bittencourt - [email protected]

2 INVITED SPEAKERS

Plenary Speaker – Sunday, Dec 2 – 19:30 Hans Jürgen Herrmann (ETH – Switzerland) Bursts in the permeability of particle-laden flows through porous media

Hans Jürgen Herrmann is theoretical physicist and Full Professor at ETH, Zuriche since 2006. In 1990 he was head of the many-body group at the High Performance Computing Center of Jülich for four years. Then he was director of the Laboratoire de Physique et Mécanique des Milieux Heterogenes de l’ École Supérieure de Physique et de Chimie Industrielles de Paris (ESPCI), for six years, where he also filled a chair. In 1996, he was named full professor and director of the Institute of Computer Physics at the University of Stuttgart. His research on the numerical simulation of particulate systems includes the study of fractures of disordered materials, the effect of wind in dunes, appolonian packings, density waves in pipe flow, fragmentation, stratification, segregation, compactification, sedimentation and non-linear elasticity of packings. He is member of the Brazilian Academy of Science, a Guggenheim Fellow (1986), Max-Planck prize recipient (2002) and won the 2005 Gentner-Kastler prize. He is managing editor of International ‘Journal of Modern Physics C’ and of ‘Granular Matter’ and member of several editorial boards and committees including the Research Committee (Forschungskommission) of ETH. He has authored/co-authored about 400 publications and co-edited 13 books.

Invited Lectures MON / 4 Carolina Palma Naveira Cotta (Universidade Federal do Rio de Janeiro – Brazil) 8:30 – 9:10 Experimental and Inverse Analysis of Micro-reactors for Biodiesel Synthesis Integrated with ROOM 4 Micro-heat Exchangers for Reuse of Waste Heat THU / 7 Emmanuel Ezugwu (Air Force Institute of Technology – Nigeria) 8:30 – 9:10 Innovative Perspective in the Development and Processing of Difficult-to-Cut Alloys for ROOM AUD4 Manufacturing activities THU / 7 Henrique Rozenfeld (Universidade de São Paulo – Brazil) 8:30 – 9:10 Servitization Methodology: A case of a Medical Equipment Manufacturer From Product ROOM 9 Offering to Service Provider MON / 4 Hidetoshi Fujii (Osaka University – Japan) 8:30 – 9:10 Latest Welding for High Strength and Toughness - Friction Stir Welding of Steels without ROOM AUD3 Transformation MON / 4 Jeremy Gilbert (Clemson University – USA) 8:30 – 9:10 A Multi-Physics Approach to Tribocorrosion Studies of Metallic Biomaterials ROOM 2 MON / 4 José Alfredo Ferrari Jr (Shell/Brazil) 8:30 – 9:10 Reducing Life-Cycle Costs and Improving the Energy Efficiency of Large Floating Production ROOM 8 Platforms WED / 6 José L. Lage (Southern Methodist University – USA) 8:30 – 9:10 Sweeping Convection: A New Convection Mode by Large Particles ROOM 6 MON / 4 Ketul Popat (Colorado State University – USA) 13:30 – 14:10 Superhydrophobic Surfaces for Blood Contacting Medical Devices ROOM 2 TUE / 5 Mohammad I. Younis (State University of New York at Binghamton – USA) 8:30 – 9:10 Nonlinear Dynamics of Micro and Nano Systems for Superior Devices ROOM 9 WED / 6 Vicente Massaroti (VTECH- Brazil) 8:30 – 9:10 Optical Metrology Applied on the 4.0 Industry – State of Art and Future Applications and ROOM AUD3 Development THU / 7 Zahid Ayub (Isotherm Inc – USA) 8:30 – 9:10 Current refrigerant landscape in the context of Kigali 2016 agreement and the potential role ROOM AUD2 of natural refrigerants

3 COBEM 2017 – CONGRESS INFORMATION

Certificate of Presentation / Attendance A digital Certificate of Attendance or Presentation will be issued to all participants of the Congress. You will receive a login and password to download the certificate.

Emergency / First Aid For any medical emergency, please dial (41) 3271-1550 / Cell: (41) 9.9911-7862, (Mon to Fri – 7 to 23h, Sat 7 to 18h). Any other emergency (Mon – Sun), dial (41) 3271-1200. More information at: https://www.pucpr.br/vida-no-campus/servicos/urgencias-e-emergencias/

Information If you require any assistance during the Congress, please call (41) 3271-1385 and ask for the Secretary desk. The Secretary desk is located in the registration area and is in service for the entire duration of the event.

Language English is the official language of the Symposium. Therefore, the program will be presented in English.

Wireless Internet Wireless Internet is available and can be accessed anywhere at PUCPR (access Visitantes network).

Parking Parking lot rates (access from gates 1, 2 and 3): • Flat rate for the whole day: R$10 (COBEM attendants only) All prices are in Brazilian Reais and subject to change without notice. More information: https://www.pucpr.br/vida-no-campus/servicos/estacionamento/cobrancas-e-formas-de- pagamento/

Lunch Several options inside campus and around campus. Please, check the options inside campus at: https://www.pucpr.br/vida-no- campus/servicos/## There are several restaurants at walking distance from campus. Please check the map and restaurant description/prices at: https://www.google.com/maps/d/edit?mid=1FUNjFq9UxT9pF9ISXMpfqlOPvyc&ll=- 25.453290580082125%2C-49.255738738169384&z=21

Registration Restaurants around The registration desk will be in operation during these hours: campus Sunday, December 2, 13:30-18:30 Monday to Friday, December 3 - 8, 07:30-8:30

Congress Dinner We invite you to experience top authentic Brazilian culinary delights and other typical Brazilian specialties like caipirinhas on “Botecaria do COBEM”. The essential meaning of Boteco is that it’s a place where you go for delicious food, lots of drinks, good music and hang out with friends. Make sure to confirm your participation in this activity at the Secretary Desk. Buy your ticket in advance, sold in limited number due to limited space. Price is R$35/person all-you-can-eat. This event will take place at Le Dani Restaurant, located at Av. Pres. Kennedy, 2511 - Água Verde, about 4 km from PUCPR (~15 min driving). Bus line 216.

4 COBEM 2017 – CONGRESS INFORMATIONGENERAL INFORMATION – ROOM LOCATIONS

ROOM LOCATIONS:

Bloco Verde (Building 3) Registration Desk Exhibit and Poster hall 1 Restaurant AUDITÓRIO.3 - MÁRIO DE ABREU AUDITÓRIO.4 - CARLOS COSTA AUDITÓRIO.5 - GREGOR MENDEL Library 2 AUDITÓRIO 1 - JONH HENRY AUDITÓRIO 2 - BLAISE PASCAL Bloco Laranja (Building 4) 3 Rooms 300 to 309 (3rd floor) Restaurant Bloco Azul (Building 2) Theatre (TUCA) – Opening cerimony and welcome coktail 4 Food court Printing services 5 Building 9 (Mechanical Engineering department) 6 Portal (main entrance)

5 GENERAL INFORMATION – TRANSPORTATION

About Curitiba One can exchange money in banks in Brazil or in currency exchanges (safer in shopping centers). Curitiba (Tupi: “Pine Nut Land”) is the capital and Generally, ATM accept both the Cirrus/MasterCard largest city of the Brazilian state of Paraná and one of and the Plus/Visa cards. ATMs are located all over the the most prosperous and organized cities in Brazil. country and offer a reasonable exchange rate. The city’s population numbered approximately Visa and MasterCard are widely accepted in Brazil. 1,879,355 people as of 2015, making it the eighth most American Express and Diners Club, are often accepted populous city in the country, and the largest in Brazil’s as well. Travelers checks can be difficult to cash, and South Region. when they are cashed, there can be a fee associated with them. There are many exciting things to do in Curitiba. From historical sites to cultural attractions, explore the Getting from/to the Airport exhaustive list of all other local attractions in Curitiba. Afonso Pena International airport in Curitiba is about Best things to do in Curitiba and nearby areas, top 8 km to city center, and will take about 40 to 50 min attractions to visit such as historical monuments, depending on traffic. natural attractions, adventurous and entertainment activities to do, places to eat and drink. At the airport, you can find the services of the “Aeroporto Executivo”. It is a minibus connecting the More information: airport to the center of Curitiba. The route passes – www.curitiba.pr.gov.br/idioma/ingles through several hotels and important points of the city – www.curitibacvb.com.br/page/attractions-curitiba- during the itinerary. Price: R$14. and-around (www.aeroportoexecutivo.com.br) – www.triphobo.com/places/curitiba-brazil/things- to-do You can also pick a taxi cab (about R$ 90), or Uber / – www.turismo.curitiba.pr.gov.br/categoria/atrativos Cabify (R$30-40). Obs. Take Uber/Cabify only at -turisticos/3 Landing Gate. – traveltoparana.wordpress.com/2010/03/17/inspirin g-curitiba-20-photos-that-will-make-you-want- Getting from/to the Bus station (Rodoferroviária): In to-visit-curitiba-parana-brazil/ front of the Bus Station there are several bus stop that runs to downtown. Useful local Information

Weather In Curitiba, the month of December is characterized by hot days and mild nights. Usually daily highs are around 23 °C (74 °F), rarely exceeding 27 °C (81 °F) or dropping below 13 °C (56°F). The month of December in Curitiba experiences afternoon rain (typical of summer season), so there is a good chance of a wet day. Bring your umbrella. Feira do Largo da Ordem – Arts and Craft street market (Sunday only)

Time difference GMT - 3 hours

Currency The Brazilian Real is the national currency (R$). The ask and bid rate for both the USD and the Euro are shown on the Central Bank of Brazil’s website (https://www.bcb.gov.br/en/#!/home) at the right- City tour - http://www.curitiba.pr.gov.br/idioma/portugues/linhaturismo hand column. As of November 03, 2017, USD 1.00 equaled R$ 3.29 and 1.00 EUR to R$ 3.82.

6 GENERAL INFORMATION – TRANSPORTATION

The public transportation system in Curitiba is 20 minutes on business days. On Saturdays, buses internationally renowned. Since the 1970s, the city usually take longer. You can check the paths in the has been concerned with offering the population website: site: more modern and efficient solutions for locomotion. http://www.urbs.curitiba.pr.gov.br/horario-de- Common bus: The main means of public onibus transportation in the capital of Paraná is the bus. CITY TOUR There are more than 250 lines, with 342 tube stations and 30 terminals, operated by URBS, which serve as Turism Line: The Linha Turismo is a special hop-on point for vehicle exchange. The great advantage of hop-off bus that visits the main tourist attractions in the Curitiba transportation system is to be Curitiba. It is possible to visit the parks, squares and integrated. With only one ticket paid, you can take the rest of the city's tourist attractions. Considered as many buses as you need and go through the one of the best in the country, the Linha Turismo is itinerary and the distance you want within any time available every thirty minutes and has a two and a frame. half-hour tour, which travels around forty-four kilometers. The tour starts at Praça Tiradentes, but it The payment of tickets is made to collectors at the is possible to join the tour at any moment. To go on entrance of the station which streamlines the the tour you must buy a ticket with five vouchers that transportation system. The vehicles, of various sizes gives you the right to get on and off bus four times. and purposes, circulate by exclusive routes, but Get to know thw Tourism Line - Linha Turismo and suffer from overcrowding, frequent at peak times. If travel around Curitiba. Linha Turismo uses double- you want to use public transport, avoid trips between decker buses. There is an audio system with tourist 7am and 9am and between 6pm and 8pm. The price information in Portuguese, English and Spanish. of the fare is R$ 4.25 Know more at: Link of the transport system in Curitiba: http://www.curitiba.pr.gov.br/idioma/portugues/lin http://www.urbs.curitiba.pr.gov.br/PORTAL/publica haturismo dor/intranet/BOLETRANS/boletim/upload/1867-

20150415135315_5.pdf Restaurants and pubs shuttle Lines with card transportation: Some lines make use In Curitiba, the congress attendants have a free of the transport card, that is why, they circulate shuttle service for some restaurants, pubs, theater, without collectors. The transport card can be made and malls. Service is available from Monday to in nine addresses by simply presenting CPF and Saturday from 19:30 to 23:30 with previous booking. original identity document with photo and the first The transportation booking must be made by the route is free. person in charge at the hotel or at the partner Transport card credit loading can be made free of establishment between 7:30 and 18:30 on the day charge over the internet - in which case credits will that will be used. Easy, safe and free! See more about be available within 72 hours. For more information the “Leva e Traz de Curitiba” at the site: about lines and how to get the transport card access http://levaetrazgratis.com.br/, or dial (41) 3888- to the city's website: 3464. http://www.urbs.curitiba.pr.gov.br/ http://www.urbs.curitiba.pr.gov.br/guia_servico/69 Transportation by apps: Curitiba also has individual passenger transportation mediated by applications Access to PUCPR: The PUCPR is four kilometers from such as UBER, CABIFY, and 99 POP. downtown, bus access is simple. There are 12 lines Bus app: Trovit that have bus stops in front and near the campusy.

The yellow lines that lead to downtown are Bom

Retiro / PUC, Raquel Prado and Vila São Paulo, every

7 GENERAL INFORMATION – TOURISM

Train tour to Morretes surfing, bodyboarding, trekking, canoeing, sailing, sport fishing and even practiced paragliding. The train tour from Curitiba to Morretes or Paranaguá lasts about 3-4 hours and among its 110 kilomeeters of railway line extension you get to see amazing landscapes, rich animal and vegetation biodiversity, spectacular bends, canyons and gorges, waterfalls and a lot more. After the tour, you can stroll and visit other tourist attractions in the historical cities of Morretes. Eating the delicious Barreado for lunch is also a must do! Barreado, a typical dish of the Paraná State, Brazil, is a slow- cooked meat stew prepared in a clay pot whose lid is sealed with a sort of clay made from wheat or cassava flour, hence the name (which means, literally, “muddied”.

Vila Velha State Park

Vila Velha State Park or Parque Estadual de Vila Velha is located about 90km (55 miles) from Curitiba. The park is famous because of its intriguing, curious and very interesting sandstone formations rise from fields which were at the bottom of an ocean 600 million years ago. Volcanic eruptions, glaciation, and erosion by wind and rain have created over 20 gigantic shapes of a camel, a sphynx, a goblet and many others. The Goblet is a key element in an indigenous myth which explains the creation of Vila Velha. Seen from a distance or from the air, Vila Velha reminds a medieval town, standing majestic in the Paraná region of Campos Gerais.

Ilha do Mel (Honey Island)

Ilha do Mel is a perfect place to relax around nature and and enjoy deserted beaches after the congress. Access to the Island is by boat, through the Balneário de Pontal do Sul (approximately half hour). Located between a complex of state and federal parks, Ilha do Mel has been transformed into an ecological station by UNESCO and is currently a Nattural State Park aiming at the preservation of its riches and unique natural beauties.Its unique landscape provides unforgettable tours for its beaches, coastlines, trails, forests, hills, mangroves and nearby islands. Not to mention the historical monuments *You can get more information at the Serra Verde and the various options of leisure and sports being Express Exhibitor boot

8 PRESENTER GUIDELINES

Instructions for all presenters in each oral session (invited, orals)

All presenters must ensure their presentations will run properly on PowerPoint for Windows. Computer in the session room are equipped with Windows 7 or 10. Please, upload your file (PPTX or PDF) at the Registration desk before your presentation.

Even if you have successfully uploaded your presentation beforehand, we kindly ask you to verify your presentation file and its fonts, images, videos, animations etc., before each session.

Invited talks: 40 min Oral talks: 20 min

Please note: • ALL FILES WILL BE DELETED AT THE END OF THE CONGRESS. • THE “PRESENTER VIEW” IS NOT AVAILABLE ON THE SCREEN. IF YOU NEED YOUR NOTES, PLEASE BRING THEM ON PAPER.

Instructions for all Poster presenters

Poster Location: Bloco Verde (Building 3) Authors are responsible for the set up and the removal of their posters according to the following schedule:

Poster Sessions Mounting Time: from 8:00 to 12:00 Poster Networking Times: from 15:50 to 17:50 Removal: after 18:00 Presenter are responsible for poster removal. All poster materials will be discarded if not removed from the boards by 18:30 each day.

Poster size: 90 x 120 cm

Posters can be printed beforedhand if wanted, and delivered to you during the week. Please contact the printing company for pricing and payment details: RAROS Plotagem email: [email protected] ou [email protected] tel: (41) 3366-5498 or (41) 3365-4231 There is also a possibility to print the posters on campus, if needed.

Use of video equipment prohibited

The use of video recording equipment, cameras, cell phone cameras, or audio equipment is prohibited at any oral session without prior written approval of the ABCM. The ABCM reserves the right to reroduce, by any means selected, any or all of these presentations and materials.

REMINDER: Please turn off CELL PHONES when you are attending all oral sessions.

9 PROGRAM AT A GLANCE

COBEM 2017 - PROGRAM AT A GLANCE

DEC 3 / SUN DEC 4 / MON DEC 5 / TUE DEC 6 / WED DEC 7 / THU DEC 8 / FRI 7:00 -08:30 Registration Registration Registration Registration Registration

AERO, BIOE, COMB, DYNM, AERO, BIOE, COMB, DYNM, AERO, FIVB, COMB, DYNM, ENTS, AERO, FIVB, FRFS, PROD, DYNM, MECH, ENTS, FRFS, FLMR, HVAC, 08:30 - 10:10 NMMS, ENTS, FLMR, OSPE, NMMS, ENTS, FLMR, MMEN, FLMR, MMEN, MECH, ICONNE, ENTS, FLMR, MMEN, MECH, MMEN, DYNM MMEN, MECH, ICONNE, SOLM MECH, ICONNE, QUSM, SOLM SOLM SMST, HVAC

10:10 - 10:40 Coffee break Coffee break Coffee break Coffee break Coffee break

AERO, BIOE, COMB, DYNM, AERO, BIOE, COMB, DYNM, AERO, FIVB, COMB, DYNM, ENTS, AERO, FIVB, FRFS, PROD, DYNM, MECH, ENTS, FRFS, FLMR, HVAC, 10:40 - 12:00 NMMS, ENTS, FLMR, OSPE, NMMS, ENTS, FLMR, MMEN, FLMR, MMEN, MECH, ICONNE, ENTS, FLMR, MMEN, MECH, MMEN, DYNM MMEN, MECH, ICONNE, SOLM MECH, ICONNE, QUSM, SOLM SOLM SMST, HVAC

Closing Ceremony

12:00 - 13:30 Lunch Lunch Lunch Lunch Lunch

AERO, BIOE, COMB, DYNM, ENTS, AERO, BIOE, COMB, DYNM, ENTS, AERO, FIVB, COMB, DYNM, ENTS, ENACEM, FRFS, PROD, DYNM, 13:30 - 15:50 FLMR, OSPE, MMEN, MECH, FLMR, MMEN, MECH, ICONNE, FLMR, MMEN, MECH, ICONNE, ENTS, FLMR, MMEN, MECH, ICONNE, PIPV, SOLM QUSM, SOLM SMST, EMBRAER SMST, HVAC

Poster Session (120 min) Poster Session (120 min) Poster Session (120 min) Registration Poster Session (120 min) Coffee Break Coffee Break Coffee Break Coffee Break 15:50 - 17:50 AERO, BIOE, COMB, DYNM, ENTS, AERO, BIOE, COMB, DYNM, ENTS, AERO, FIVB, COMB, DYNM, ENTS, ENACEM, FRFS, DYNM, ENTS, FLMR, OSPE, MMEN, PIPV, SOLM, FLMR, MMEN, QUSM, SOLM, FLMR, HVAC, MMEN, NUCE, PROD, SMST, MMEN, MECH MECH, NMMS MECH ICONNE, MECH

16:50 - 18:30 Invited - SBPC President ABCM Committes Meeting EMBRAER AWARD AUD. 5 - Bldg 3 (Verde) AUD. 5 - Bldg 3 (Verde) ABCM General Metting AUD. 5 - Bldg 3 (Verde) 19:00 - 19:30 Opening cerimony

19:30 - 20:30 Plenary talk (60 min)

20:30 - 22:30 Welcome coktail Social Gathering Botecaria

22:30 - 00:00

AERO Aerospace Engineering MMEN Materials and Manufacturing Engineering BIOE Bioengineering MECH Mechatronics and Automation COMB Combustion and Environmental Engineering NMMS Nano and Microfluidic and Micro-Systems DYNM Dynamics ICONNE Non–linear Phenomena ENACEM Education Symposium NUCE Nuclear Engineering ENTS Energy and Thermal Sciences OSPE Offshore and Petroleum Engineering FIVB Flow Induced Vibration PIPV Pipping and Pressure Vessels FLMR Fluid Mechanics and Rheology PROD Product Engineering FRFS Fracture, Fatigue, and Structural Integrity QUSM Quantification of Uncertainties and Stochastic Modelling HVAC Heating, Ventilation, Air-Conditioning and Refrigeration SMST Smart Materials and Structures SOLM Solid Mechanics

10 COBEM 2017 – ROOM MATRIX

ORAL SESSIONS MON / 4 TUE / 5 WED / 6 THU / 7 FRI / 8 ROOM 1 morning AERO AERO AERO AERO BLDG. 3 afternoon AERO AERO AERO ENACEM ROOM 2 morning BIOE (BIOMAT) BIOE (BIOMECH) FIVB FIVB BLDG. 3 afternoon BIOE (BIOMAT) BIOE (BIOMECH) FIVB MECH2 ROOM 3 morning MECH1 MECH1 MECH1 MECH1 MECH1 BLDG. 3 afternoon MECH1 MECH1 MECH1 MECH1 ROOM 4 morning NMMS NMMS ENTS3 ENTS3 ENTS3 BLDG. 3 afternoon ENTS3 ENTS3 ROOM 5 morning COMB COMB COMB FRFS FRFS BLDG. 3 afternoon COMB COMB COMB FRFS ROOM 6 morning ENTS1 ENTS1 ENTS1 ENTS1 BLDG. 3 afternoon ENTS1 ENTS1 ENTS1 ROOM 7 morning ENTS2 ENTS2 ENTS2 ENTS2 BLDG. 3 afternoon ENTS2 ENTS2 ENTS2 ENTS2 ROOM 8 morning OSPE QUSM DYNM2 DYNM2 BLDG. 3 afternoon OSPE/PIPV QUSM EMBRAER DYNM2 ROOM 9 morning ICONNE ICONNE ICONNE PROD BLDG. 3 afternoon ICONNE ICONNE ICONNE PROD ROOM 10 morning SOLM SOLM SOLM SMST BLDG. 3 afternoon SOLM SOLM SMST SMST AUD 1 morning FLMR1 FLMR1 FLMR1 FLMR1 FLMR1 LIBRARY afternoon FLMR1 FLMR1 FLMR1 FLMR1 AUD 2 morning FLMR2 FLMR2 FLMR2 HVAC HVAC LIBRARY afternoon FLMR2 FLMR2 FLMR2 HVAC AUD 3 morning MMEN1 MMEN1 MMEN1 MMEN1 MMEN1 BLDG. 1 afternoon MMEN1 MMEN1 MMEN1 MMEN1 AUD 4 morning MMEN2 MMEN2 MMEN2 MMEN2 MMEN2 BLDG. 1 afternoon MMEN2 MMEN2 MMEN2 MMEN2 AUD 5 morning DYNM1 DYNM1 DYNM1 DYNM1 DYNM1 BLDG. 1 afternoon DYNM1 DYNM1 DYNM1 DYNM1

POSTER SESSIONS MON / 4 TUE / 5 WED / 6 THU / 7 FRI / 8 AERO AERO AERO ENACEM BIOE (bioma/med) BIOE (BIOMECH) FIVB FRFS COMB COMB COMB DYNM DYNM DYNM DYNM ENTS ENTS ENTS ENTS POSTER HALL FLMR FLMR FLMR PROD BLDG. 1 OSPE HVAC SMST afternoon MMEN MMEN MMEN MMEN PIPV QUSM NUCE SOLM SOLM ICONNE MECH MECH MECH MECH NMMS

11 PLANNING GRID

Invited presentations are 40 min; contributed oral presentations are 20 min. 4 / SEG 5 / TER 6 / QUA 7 / QUI 8 / SEX Paper Room Paper Room Paper Room Paper Room Paper Room 8:30 8:50 8:50 9:10 9:10 9:30 9:30 9:50 9:50 10:10

10:10 10:40 Coffee break Coffee break Coffee break Coffee break Coffee break

10:40 11:00 11:00 11:20 11:20 11:40 Closing 11:40 12:00 Ceremony 12:00 12:20 12:20 12:40 Lunch Lunch Lunch Lunch Lunch 12:40 13:00 13:00 13:30 Paper Room Paper Room Paper Room Paper Room 13:30 13:50 13:50 14:10 14:10 14:30 14:30 14:50 14:50 15:10 15:10 15:30 15:30 15:50 15:50 16:10 16:10 16:30 16:30 16:50 Poster Session Poster Session Poster Session Poster Session 16:50 17:10 17:10 17:30 17:30 17:50 17:50 18:10 18:10 18:30 18:20 18:40 18:40 19:00 19:00 19:20 19:20 19:40 19:40 20:00 20:00 20:20 20:20 20:40 20:40 21:00 21:00 21:20 21:20 21:40 Dinner 21:40 22:00 22:00 22:20 22:20 22:40 22:40 23:00 23:00 23:20 23:20 23:40

12 DETAILED PROGRAM - ORAL SESSION (AREA / DAY)

ORAL SESSION MON / 4

AERO - Aerospace Engineering (Room 1 – Bldg. 4 / Laranja) TIME CODE Flight Dynamics Model identification approach for aircraft failure detection on take-off maneuver 8:30 0750 AERO1 using a motion-based simulator, A. D. Kraemer, D. H. Arjoni, E. Villani (Instituto Tecnológico de Aeronáutica) A preliminary study on active flow control applied to crosswind stability of high- 8:50 1463 AERO2 speed trains, A. M. Correa, F. Souza, C. Duarte (Universidade Federal de Uberlândia) Influence of aerodynamic stability on the trajectory of uncontrolled sounding 9:10 2498 AERO3 rockets, E. Pereira, E. Barbosa (Instituto de Aeronáutica e Espaço) Dynamic considerations for engine’s charts and application at EMB-314 and 9:30 2640 AERO4 Northrop F-5F aircraft, G. Silva, D. S. A. Albuquerque, F. Silvestre (Instituto Tecnológico de Aeronáutica), A. Uehara (Instituto de Pesquisas e Ensaios em Voo) On the absolute instability of laminar separation bubbles, M. Avanci, D. Rodriguez, 9:50 0666 AERO5 L. S. B. Alves (Universidade Federal Fluminense) 10:10 Coffee-break TIME CODE Aerospace structures Processing and characterization of Si based diffusion coatings on metallic Nb, A. S. 10:40 1807 AERO6 D'Oliveira, M. Thomé (Universidade Federal do Paraná) Mechanics of hybrid nanocomposites: the carbon nanotube/graphene effect into 11:00 1125 AERO7 failure modes, A. Avila, S. G. Leão, F. L. R. M. Lima, M. G. M. Martins, N. C. F. Menezes, M. N. Mello (Universidade Federal de Minas Gerais) Mechanical behavior of piezoelectric nanomembranes doped with carbon nanotubes, 11:20 1126 AERO8 A. Avila, S. G. Leão, N. C. F. Menezes, F. L. R. M. Lima, M. G. M. Martins, M. N. Mello (Universidade Federal de Minas Gerais) Effect of acid attack on thermal degradation and complex electromagnetic parameters of CF/Ni fabric applied on wind turbine rotor blades, D. C. Silveira, M. L. 11:40 0186 AERO9 Costa (São Paulo State University), N. A. S. Gomes (Technological Institute of Aeronautics), M. C. Rezende (Technological Institute of Aeronautics, Federal University of São Paulo) 12:00 Lunch TIME CODE Aerospace structures A study on the influence of force excitation frequency on the load reconstruction 13:30 2874 AERO10 method, A. R. S. dos Santos, T. V. Lisbôa, R. Marczak (Universidade Federal do Rio Grande do Sul) Experimental and numerical buckling analyses of tow steered composite plates, D. A. Pereira (Instituto Tecnológico de Aeronáutica), W. L. N. de Mello (Instituto de 13:50 1668 AERO11 Pesquisa Tecnológica do Estado de São Paulo), V. Reis (Instituto Tecnológico de Aeronáutica), T. Guimarães (Universidade Federal de Uberlândia), D. Rade (Instituto Tecnológico de Aeronáutica) Experimental studies of heat insulation materials for hybrid propellant rocket motors, 14:10 1706 AERO12 G. P. Milhomem, A. P. Nunes, A. Andrianov, O. Shynkarenko, J. Lee (Universidade de Brasília) A tool for local buckling optimization of composite panels using NASTRAN® SOL 14:30 2396 AERO13 200, G. Abreu, S. Castro (Embraer), J. A. Hernandes (Instituto Tecnológico de Aeronáutica) Studies on aeroelastic optimization of composite swept wings, H. L. Lebkuchen, 14:50 1395 AERO14 R. G. A. da Silva (Technological Institute of Aeronautics, ITA), C. E. de Souza (Federal University of Santa Maria) Retrieving fiber angle distribution for variable stiffness laminates for a buckling load 15:10 1870 AERO15 problem, H. Quadros, J. A. Hernandes (Instituto Tecnológico de Aeronáutica) Postbuckling optimization of laminated composite rectangular plates and stiffened 15:30 0623 AERO16 panel under compression using firefly algorithm, R. M. Koide, M. A. Luersen (Universidade Tecnológica Federal do Paraná)

13 ORAL SESSION TUE / 5

AERO - Aerospace Engineering (Room 1 – Bldg. 4 / Laranja) TIME CODE Aerodynamics Study of viscous flows using high-order methods and curved boundary treatment, A. R. B. Aguiar (Instituto de Aeronáutica e Espaço), F. M. Moreira (Instituto 8:30 0514 AERO17 Tecnológico de Aeronáutica), E. Jourdan (Instituto Tecnológico de Aeronáutica), J. L. F. Azevedo (Instituto de Aeronáutica e Espaço) Slat noise: experimental and numerical efforts at USP-São Carlos. D. S. Souza (Universidade Federal de São João del Rei), C. Pagani (Universidade Estadual 8:50 5900 AERO18 Paulista Julio de Mesquita Filho), F. Amaral (Universidade de São Paulo), F. H. T. Himeno (Universidade de São Paulo), D. Rodriguez (Universidade Federal Fluminense), M. Medeiros (Universidade de São Paulo) Numerical study of the JSM high-lift configuration using a RANS approach. R. G. da Silva (Instituto de Aeronáutica e Espaço), L. M. M. O. Carvalho (Instituto 9:10 1607 AERO19 Tecnológico de Aeronáutica), J. L. F. Azevedo (Instituto de Aeronáutica e Espaço), E. Basso (Instituto de Aeronáutica e Espaço) Experimental assesment of a low reynolds number vehicle, D. Acevedo-Giraldo, L. 9:30 0690 AERO20 Botero-Bolivar, P. D. Bravo-Mosquera, H. Cerón-Muñoz, (Universidade de São Paulo), F. Catalano (Escola de Engenharia de São Carlos) Validation of a limiting methodology for high-order methods, M. A. L. Matunaga, F. 9:50 1038 AERO21 M. Moreira (Instituto Tecnológico de Aeronáutica), J. L. F. Azevedo (Instituto de Aeronáutica e Espaço) 10:10 Coffee-break TIME CODE Aerospace structures Dynamic analysis of laminate plates via Carrera Unified Formulation, M. L. Ribeiro, M. Sartorato (Universidade de São Paulo), R. Medeiros (Universidade do Estado de 10:40 0168 AERO22 Santa Catarina), A. Ferreira (Universidade do Porto, Portugal), V. Tita (Universidade de São Paulo) Nonlinear dynamics analysis of trusses applied to aerospace structures, L. S. de 11:00 0331 AERO23 Arruda (Universidade de São Paulo), R. Brasil (Universidade Federal do ABC) A numerical study on the effect of ply orientation in lamb wave propagation through 11:20 1543 AERO24 carbon fiber reinforced composites, L. E. J. Bustamante, H. Brito, V. Tita, M. L. Ribeiro (Universidade de São Paulo) Composite plates model updating using Kriging method, L. F. S. Souza (Santa 11:40 0326 AERO25 Catarina State University), V. Tita (University of São Paulo), R. Medeiros (Santa Catarina State University) 12:00 Lunch TIME CODE Aerospace structures Preliminary thermal protection system for the 14-X S scramjet technological demonstrator for atmospheric flight at 30 km altitude and speed corresponding to 13:30 2025 AERO26 Mach Number 7, J. E. da Silva Junior, J. Pinto (Universidade de São Paulo), P. Toro (Instituto de Estudos Avançados), F. da Costa (Instituto Tecnológico de Aeronáutica) A new approach for estimating the distribution of the lifting force for sizing of a 13:50 2077 AERO27 stringer of an aerodesign class airplane, M. Miguel, P. Ruhan, E. Woiski (Universidade Estadual Paulista Julio de Mesquita Filho) Shape distortions of angled sandwich panels, O. M. Makinde, A. Faria, M. Donadon 14:10 0531 AERO28 (Instituto Tecnológico de Aeronáutica) Shape distortion predictions of curved sandwich panels: a parametric study, O. M. 14:30 1557 AERO29 Makinde, A. Faria, M. Donadon (Instituto Tecnológico de Aeronáutica) An experimental study on the impact behavior of CF/epoxy circular tubes, P. B. 14:50 2873 AERO30 Ataabadi (Universidade de São Paulo), D. Karagiozova (Bulgarian Academy of Sciences, Bulgaria), L. Driemeier, M. Alves (Universidade de São Paulo) Non-isothermal aeroelastic behavior of a typical section with shape memory alloy 15:10 0497 AERO31 springs, V. C. de Sousa, T. M. P. Silva, C. de Marqui Jr (University of São Paulo) 15:30

14 ORAL SESSION WED / 6

AERO - Aerospace Engineering (Room 1 – Bldg. 4 / Laranja) TIME CODE Aerodynamics What does linear instability analysis tells us about airfoil tonal noise?, D. Rodriguez 8:30 0139 AERO32 (Universidade Federal Fluminense), E. M. Gennaro (Universidade Estadual Paulista), W. Arias-Ramirez, W. Wolf (Universidade Estadual de Campinas) CFD analysis on high-speed train aerodynamics under crosswind conditions, A. M. 8:50 1465 AERO33 Correa, F. Souza (Universidade Federal de Uberlândia) Analysis of influence of plain flap and gurney flap on aerodynamics coefficients of 9:10 2697 AERO34 the airfoil SELIG 1223 by finite volume method, A. Almeida, L. M. C. Ferro (Universidade Federal Rural do Semi-Arido) A low computational cost analysis for a vertical axis wind turbine according to 9:30 2660 AERO35 MSTM, A. C. R. Maia, H. Cerón-Muñoz (Universidade de São Paulo) Parametric drag analysis of strut braced wing aircraft for regional aviation, A. C. 9:50 1408 AERO36 Meinicke, J. C. M. Rodrigues (Instituto Tecnológico de Aeronáutica), P. Guedes (Embraer), R. G. A. da Silva (Instituto Tecnológico de Aeronáutica) 10:10 Coffee-break TIME CODE Control Systems and Aeroelasticity Modal testing of a flexible wing UAV, D. Zuñiga, L. C. Sandoval, R. Barbosa, B. Maciel 10:40 2477 AERO37 (Instituto Tecnológico de Aeronáutica), I. Drago (FT Sistemas) HIL system with 3-axis Gimbal for UAV’s autopilot tests, D. Costa, N. M. F. Oliveira, R. 11:00 2229 AERO38 d'Amore (Instituto Tecnológico de Aeronáutica) Control systems for flutter suppression of a typical section, G. Silva, F. Silvestre, M. 11:20 1988 AERO39 Donadon, O. S. Santos, A. B. Guimarães Neto, R. G. A. da Silva, T. Versiani, R. Bertolin (Instituto Tecnológico de Aeronáutica) 11:40 12:00 Lunch TIME CODE Control Systems and Aeroelasticity Theoretic-numerical-experimental study of high aspect ratio wing aeroelastic response, O. Neto (Universidade Federal de Uberlândia), R. Duarte (Universidade 13:30 1742 AERO40 Federal de Campina Grande), D. P. A. Peña (Universidade Federal da Paraíba), R. G. A. da Silva (Instituto Tecnológico de Aeronáutica) Modeling, simulation and control of a launch vehicle, R. Zanatta, M. Sousa, S. Cunha 13:50 0915 AERO41 Jr (Universidade Federal de Itajubá) The use of digital cameras as orbital sensors in spacecraft, W. M. Lopes Jr., J. C. V. de 14:10 2815 AERO42 Castro, R. Rocha (Universidade Federal de Outo Preto)

15 ORAL SESSION THU / 7

AERO - Aerospace Engineering (Room 1 – Bldg. 4 / Laranja) TIME CODE Propulsion Design and analysis of a scramjet inlet and combustion chamber for heat addition 8:30 1167 AERO43 rate investigation, F. da Costa (Instituto Tecnológico de Aeronáutica), A. C. de Oliveira, P. Toro, T. Rolim (Instituto de Estudos Avançados) Propulsion parameters of Noble-Abel gases, F. S. Costa (Instituto Nacional de 8:50 0235 AERO44 Pesquisas Espaciais) Building and testing of a lab-scale hybrid rocket motor for acquisition of regression 9:10 0571 AERO45 rate equations, G. Engler, T. Araújo (Universidade Federal do ABC), L. H. Gouvêa, F. S. Costa (Instituto Nacional de Pesquisas Espaciais) Spray cone angles by a pressure swirl injector for atomization of gelled ethanol, G. A. 9:30 0549 AERO46 A. Fischer, F. Costa, J. C. Andrade (Instituto Nacional de Pesquisas Espaciais) Theorical and experimental heat transfer in rocket engine with solid propellant, I. Vicentin, C. H. Marchi (Universidade Federal do Paraná), A. C. Foltran (Universidade 9:50 1322 AERO47 Positivo), D. F. Moro, N. D. P. da Silva, M. Campos, L. Araki (Universidade Federal do Paraná ) 10:10 Coffee-break TIME CODE Propulsion Burning of polyethylene with hydrogen peroxide in a 2D slab combustor, L. H. 10:40 0902 AERO48 Gouvêa, F. S. Costa (Instituto Nacional de Pesquisas Espaciais) Flow analysis inside the combustion chamber and the nozzle of a hybrid rocket 11:00 0990 AERO49 motor, P. G. C. Martins, O. Shynkarenko (Universidade de Brasília) A study of foamed cooling channel for rocket engines, M. Celone, R. C. Moro Filho 11:20 0222 AERO50 (Universidade Federal do Rio Grande do Norte) 11:40 12:00 Lunch

16 ORAL SESSION MON / 4

BIOE - Bioengineering (Room 2 – Bldg. 4 / Laranja) TIME CODE Biomaterials A multi-physics approach to tribocorrosion studies of metallic biomaterials, J. Gilbert 8:30 Invited (Clemson University, USA) Corrosion properties of Mg-Ca-Gd alloy applied to biodegradable implants, A. C. C. 9:10 1009 BIOE1 de Almeida, C. Elias, D. Fernandes, E. Monteiro, P. Gomes (Instituto Militar de Engenharia) Wear in prosthetic implants: mass loss, GVS and SPL on diagnostic of pH influence on metal-porcine bone union during mechanical masticatory process, N. M. F. T. S. 9:30 2494 BIOE2 Araújo, G. S. A. Pontes, J. A. L. de Sousa, M. S. Oliveira, J. T. N. de Medeiros (Universidade Federal do Rio Grande do Norte) Corrosion properties of Zn-TiO2 produced by plasma electrolytic oxidation, D. E. 9:50 2422 BIOE3 Francisco, L. S. Santos, C. A. H. Laurindo, P. Soares (Pontifícia Universidade Católica do Paraná) 10:10 Coffee-break TIME CODE Biomaterials Silicone reinforced by nylon fibers under simple shear for emulating biological 10:40 0718 BIOE4 tissues, C. S. Moreira, R. P. Faria, L. Nunes (Universidade Federal Fluminense) Production of nanofiber for biomedical application, P. Capellato (Universidade Estadual de Campinas), A. P. R. A. Claro (Universidade Estadual Paulista Julio de 11:00 2658 BIOE5 Mesquita Filho), C. Zavaglia (Universidade Estadual de Campinas), G. Silva (Universidade Federal de Itajubá) Mechanical behaviour of a titanium implant for repair of rotator cuff tears, M. V. Guimarães, C. A. Araújo, T. C. Carmo (Universidade Federal de Uberlândia), E. D. 11:20 1900 BIOE6 Bonifácio (Universidade Federal dos Vales do Jequitinhonha e Mucuri), D. V. Novais (Universidade Federal de Uberlândia) Adhesion evaluation of nanostructured coatings on titanium alloy for biomedical applications, A. L. A. Hatem, L. F. Reali (Pontifícia Universidade Católica do Paraná), 11:40 2383 BIOE7 J. Lin, R. Wei (SouthWest Research Institute), R. Torres, C. A. H. Laurindo, P. Soares (Pontifícia Universidade Católica do Paraná) 12:00 Lunch TIME CODE Biomaterials Superhydrophobic surfaces for blood contacting medical devices, K. Popat (Colorado 13:30 Invited State University, USA)

Bactericidal activity evaluation of TiO2 coatings doped with silver, zinc and boron, L. Santos, S. Cogo, M. Dias-Netipanyj (Pontifícia Universidade Católica do Paraná), S. 14:10 0705 BIOE8 Pinto (Universidade Estadual de Ponta Grossa), S. Espósito, P. Soares (Pontifícia Universidade Católica do Paraná) Selective Laser Sintering of poly(vinyl alcohol) with the purpose of producing scaffolds for in vitro studies, M. Meruvia, C. Higa, F. L. Amorim, S. E. Esposito, T. G. F. C. do 14:30 1932 BIOE9 Nascimento (Pontifícia Universidade Católica do Paraná), M. Oliveira, P. Inforçatti Neto, J. V. L. da Silva (Centro de Tecnologia da Informação Renato Archer) Mechanical characterization of a cell by AFM: computational approach, P. H. O. 14:50 1273 BIOE10 Ramos, L. A. G. Torres (Universidade Federal dos Vales do Jequitinhonha e Mucuri)

Incorporation of Chlorhexidine on Ti15Mo alloy after TiO2 nanotubes growth – in 15:10 5488 BIOE11 vitro study, A. R. Rangel, F. V. P. Kodaira, R. T. Konatu, A. L. A Escada, A. P. R. Alves Claro (Universidade Estadual Paulista) Health Innovation using the Biodesign Tools, R. Pecoits-Filho (Pontifícia 15:30 Invited Universidade Católica do Paraná)

17 ORAL SESSION TUE / 5

BIOE - Bioengineering (Room 2 – Bldg. 4 / Laranja) TIME CODE Biomechanics Upper limb rehabilitation through bicycle controlling, L. M. Pedro (Universidade Federal de São Carlos), L. Cardoso, M. Martelleto (Universidade de São Paulo), P. 8:30 2469 BIOE12 M. Aguiar (Instituto Federal de São Paulo), G. Caurin (Universidade de São Paulo), R. Aroca (Universidade Federal de São Carlos) Classification of right and left elbowmovement with lower gamma activity, E. Veslin, M. S. Dutra, L. Bevilacqua (Universidade Federal do Rio de Janeiro), L. S. C. 8:50 2456 BIOE13 Raptopoulos, W. Andrade (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), A. da Silva, M. Fiorani, J. G. M. Soares (Universidade Federal do Rio de Janeiro) Mechanical analysis of the adaptative hip guide for periacetabular osteotomy 9:10 0920 BIOE14 surgery, F. G. Silva, F. Bastos, A. Scari, B. G. S. e Souza (Universidade Federal de Juiz de Fora) Development of a temporomandibular joint prosthesis based on the kinematic 9:30 0350 BIOE15 behavior of a healthy system, H. T. Idogava, G. B. Daniel (Universidade Estadual de Campinas) Hemodynamic numerical study of an aneurysm in the vicinity of a three-dimensional 9:50 2267 BIOE16 arterial bifurcation, J. Carvalho, G. A. P. Baggio, J. B. C. Silva (Universidade Estadual Paulista Julio de Mesquita Filho) 10:10 Coffee-break TIME CODE Biomechanics Mechanical design of a low cost transhumeral prosthesis, J. L. V. Dias, L. A. G. 10:40 0599 BIOE17 Malagón (Universidade de Pernambuco) Analysis of forces and angles of the lower member’s articulations during the human gait, J. S. R. Martins, F. Vieira (Pontifícia Universidade Católica de Minas Gerais), C. 11:00 2423 BIOE18 Vimieiro (Universidade Federal de Minas Gerais), J. M. S. Ribeiro (Centro Federal de Educação Tecnológica de Minas Gerais) Quantification of force in specific muscle groups during the flexion and extension movement of the elbow and knee joints of the human body, J. Atehortua, D. Buritica, 11:20 2800 BIOE19 R. Matallana, S. Vallejo (Universidad Nacional de Colombia), F. Valencia (Fundación Universitaria María Cano), J. Ramirez (Universidad Nacional de Colombia) Instrumented module for investigation of contact forces for use in rehabilitation and assessment of bimanual functionalities, L. M. Pedro (Universidade Federal de São 11:40 2475 BIOE20 Carlos), M. Martelleto (Universidade de São Paulo), P. M. Aguiar (Instituto Federal de São Paulo), G. Caurin (Universidade de São Paulo), R. Aroca (Universidade Federal de São Carlos) 12:00 Lunch TIME CODE Biomechanics A splines based method for modeling the human head for use in finite elements 13:30 0951 BIOE21 analysis, L. M. Rincon, D. Ponce, E. Szpoganicz (Universidade Federal de Santa Catarina) An analytical model for an intramedullary nailing, P. P. Kenedi, J. R. O. Silva Neto 13:50 2016 BIOE22 (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), L. L. Vignoli (Universidade Federal do Rio de Janeiro) Manufacturing of multi-element piezoelectric transducer to use in ultrasound 14:10 2222 BIOE23 elastography, B. Coelho, C. N. Pai (Universidade de São Paulo) Control Simulation in Functional Electrical Stimulation Application, D. Garcia, P. M. 14:30 2749 BIOE24 Aguiar (Instituto Federal de São Paulo) A review on whole body vibration for bone mineral density increase: effectiveness potentially masked, A. Delfim (Universidade Federal de Minas Gerais), M. V. de Faria 14:50 2865 BIOE25 (UniFOA), E. B. Medeiros, J. Oliveira, G. H. Godoi (Universidade Federal de Minas Gerais) 15:10 ------15:30 ------

18 ORAL SESSION MON / 4

COMB - Combustion and Environm. Eng. (Room 5 – Bldg. 4 / Laranja) TIME CODE Engine Combustion Development of a measurement system of temperature and pressure in the 8:30 0264 COMB1 combustion chamber of a torch ignition system, K. Souza, O. Shynkarenko (Universidade de Brasília) Measuring and comparing the ignition delay times of diesel, ethanol additive and 8:50 0277 COMB2 biodiesel using a shock tube, C. Santana, J. E. M. Barros, H. A. de Almeida Jr (Universidade Federal de Minas Gerais) Investigations of effects of timing injection in four-stroke direct-injection diesel 9:10 0360 COMB3 engines performance, P. G. K. Nunes, W. Gallo (Universidade Estadual de Campinas) Advanced hybrid modelling for pilot ignited dual-fuel combustion, B. S. Soriano, E. S. 9:30 0643 COMB4 Richardson (University of Southampton, UK) Effect of air-fuel ratio on Syngas combustion in an optically accessible spark ignition engine, S. D. M. Boggio, P. Lacava, M. Silva (Instituto Tecnológico de Aeronáutica), 9:50 0706 COMB5 S. Merola, A. Irimescu (Instituto Motori, CNR - Italy), P. Curto-Risso (Universidad de la República, Uruguay) 10:10 Coffee-break TIME CODE Engine Combustion Effect of using exhaust gas recirculation (EGR) on the lubricant contamination and 10:40 0728 COMB6 cylinder liner wear in a diesel combustion engine, C. H. Silva, M. A. Muraro (Universidade Tecnológica Federal do Paraná) Comparison between chemical kinetics and chemical equilibrium approaches for NO 11:00 0773 COMB7 and CO formations on spark ignition engine conditions, A. J. T. B. de Lima, W. Gallo (Universidade Estadual de Campinas) Robust identification of pressure oscillations in the combustion chamber of a heavy duty turbine, E. Yamao (Institutos Lactec), J. Pierezan (Universidade Federal do Paraná), G. Maidl (Pontifícia Universidade Católica do Paraná), E. Yamao (Institutos 11:20 1308 COMB8 Lactec), J. P. S. Gonçalves (Instituto de Tecnologia Para o Desenvolvimento), F. Chiesa (Usina Elétrica a Gás de Araucária), L. Coelho (Pontifícia Universidade Católica do Paraná) Effects of the use of D-Limonene as an additive to diesel-biodiesel blends on exhaust 11:40 1477 COMB9 gases composition of compression ignition engines, L. Micheli, D. Módolo, L. E. R. Pereira (Universidade Estadual Paulista) 12:00 Lunch TIME CODE Engine Combustion Effects of injection timing on performance, combustion and emissions of a gasoline DI engine, V. Cogo (Universidade Federal de Santa Maria), T. Lanzanova (Brunel 13:30 1496 COMB10 University, UK), M. D. Nora, A. Aronis, M. Martins (Universidade Federal de Santa Maria) Simulation of a hybrid vehicle propeller moved to ethanol, A. Delfim, G. M. A. 13:50 1590 COMB11 Carvalho, B. S. Lima, B. Murta (Universidade Federal de Minas Gerais) Performance, combustion and emissions analysis of a diesel engine fueled with soybean oil preheated by microwave irradiation, F. V. Lewiski, N. A. N. Garzón, E. 14:10 1623 COM12 Bazzo (Universidade Federal de Santa Catarina), J. Antolini, G. A. F. Prante, M. Martins (Universidade Federal de Santa Maria) Study of the thermal efficiency of an ICE-diesel using diesel fuel, biofuel and mixture, 14:30 1675 COMB13 E. Rocha, V. S. Gonçalves (Universidade Candido Mendes), F. Soto (Universidade Federal de São João del Rei), A. L. V. de Carvalho (Universidade Candido Mendes) Multipoint ethanol injection system for diesel engines, A. R. A. Achy, W. Souza, J. A. S. Silva, G. G. Demetino (Universidade Federal da Bahia), L. C. Soares Jr, V. Ferreira 14:50 1999 COMB14 (Universidade Federal do Recôncavo da Bahia), I. M. Pepe (Universidade Federal da Bahia) Hydrogen addition effects in air-fuel mixture on alternative internal combustion 15:10 2870 COMB15 engine, D. Silva (Universidade Estácio de Sá), G. S. Rodrigues (Pontifícia Universidade Católica do Rio de Janeiro) 15:30 ------

19 ORAL SESSION TUE / 5

COMB - Combustion and Environm. Eng. (Room 5 – Bldg. 4 / Laranja) TIME CODE Engine Combustion Applying multi-objective differential evolution and NSGA-II optimization algorithms 8:30 2079 COMB16 on a single-cylinder internal combustion engine, G. Menzel, S. H. Och, L. M. Moura (Pontifícia Universidade Católica do Paraná) Analysis of lambda, angle of injection and substitution rate in hydrocarbons 8:50 2104 COMB17 Emissions in diesel cycle engine operating in dual fuel mode, S. C. L. Nogueira, L. M. Moura, S. H. Och (Pontifícia Universidade Católica do Paraná) Compensation of the engine indicating pressure signal distortion produced by a fiber-optic sensor, J. Velásquez (Universidade Tecnológica Federal do Paraná), D. 9:10 2376 COMB18 Santos (PETROBRAS Petróleo Brasileiro S.A.), I. Bassani (Pontifícia Universidade Católica do Paraná) Portrayal of displacer and temperature in Beta-type Stirling engine, B. Caetano, O. R. 9:30 2516 COMB19 S. Rodriguez, R. M. Valle, I. F. Lara, G. Giudice (Universidade Federal de Minas Gerais) Development and comparison of a phenomenological predictive model of one and 9:50 2627 COMB20 two zones for a spark ignition engine, A. P. Mattos, W. Gallo (Universidade Estadual de Campinas) 10:10 Coffee-break TIME CODE Chemical Kinetics and Modeling Evaluation of emissions of burning alternative liquid fuels in gas turbine combustors, 10:40 0212 COMB21 G. Almeida (Pontifícia Universidade Católica do Rio de Janeiro), W. O. I. Bohorquez (Universidade Federal de Juiz de Fora ) Optical laser diagnostics and chemical kinetics investigation of laminar flame speed 11:00 0320 COMB22 for hydrous ethanol, F. Martins, C. Andrade, P. Lacava, L. R. dos Santos, M. E. Sbampato, L. G. Barreta (Instituto Tecnológico de Aeronáutica) Simulation of a piloted jet flame (Sandia Flame D) using Fluent®, M. Deodat, A. de 11:20 0339 COMB23 Kom, S. Siroshni (University of Suriname) CFD modelling of Delft III Flame under acoustic forcing, R. Alves (Technische 11:40 0566 COMB24 Universität Dresden), A. Santos (SENAI-CIMATEC) 12:00 Lunch TIME CODE Chemical Kinetics and Modeling Carbon monoxide combustion simulations by reduced mechanism, R. Sehnem, R. S. 13:30 0618 COMB25 Quadros (Universidade Federal de Pelotas), A. de Bortoli (Universidade Federal do Rio Grande do Sul) An approximate model for the gases propagation with reaction emitted from a thermoelectric plant - Part 2, E. Chiaramonte (Universidade Federal do Pampa), R. 13:50 0627 COMB26 Garcia (Universidade Federal do Rio Grande do Sul), E. Prado, S. Meth (Universidade Federal do Pampa) Implementation of FGM technique in the open source package OpenFOAM to solve a 14:10 0722 COMB27 non premixed laminar flame, L. Maders, C. A. Hoerlle, F. Pereira, (Universidade Federal do Rio Grande do Sul) Numerical simulations of ethanol pool fires of different aspect ratios inside a 14:30 1049 COMB28 compartment using Fire Dynamics Simulator, F. R. Centeno, C. Fernandes (Universidade Federal do Rio Grande do Sul) Methodology for burner design – Combustion of pyrolysis gas from charcoal 14:50 1422 COMB29 production, N. G. B. Gomes, W. Bizzo, R. G. dos Santos, D. Carvalho, D. Medeiros, J. Chavez (Universidade Estadual de Campinas) Analysis of merged reaction mechanisms in an internal combustion engine using C 15:10 1464 COMB30 gasoline, B. S. de Lima, R. M. de Oliveira, G. M. A. Carvalho, A. Delfim, B. Murta (Universidade Federal de Minas Gerais) Effects of ADN addition on composite solid propellant formulations, T. P. Pantoja, I. 15:30 1920 COMB31 Silva (Universidade Federal do Pará), R. Gonçalves (Instituto Tecnológico de Aeronáutica)

20 ORAL SESSION WED / 6

COMB - Combustion and Environm. Eng. (Room 5 – Bldg. 4 / Laranja) TIME CODE Environmental Engineering Numerical determination of the coefficient of heat transfer by convection between 8:30 0701 COMB32 coverage and external environment in a small solar chimney, D. S. S. Machado, J. O. C. Silva, J. A. D. Silva, C. Maia (Pontifícia Universidade Católica de Minas Gerais) Estimation of LHV, released heat and exergy of a combustion reaction of spent coffee 8:50 0792 COMB33 and eucalyptus wood chips, A. L. S. Moscato (Instituto Federal do Paraná), S. R. Oliveira (Universidade Estadual Paulista) Experimental study of dispersion of toluene on non-saturated phase of the soil – Part 9:10 1708 COMB34 2, E. Chiaramonte (Universidade Federal do Pampa), R. Garcia (Universidade Federal do Rio Grande do Sul), S. Meth, E. Prado (Universidade Federal do Pampa) Development and characterization of a constant volume sampling for PM diesel engines, A. R. A. Achy, J. A. S. Silva, W. Souza, G. G. Demetino (Universidade Federal 9:30 1996 COMB35 da Bahia), L. C. Soares Jr, V. Ferreira (Universidade Federal do Recôncavo da Bahia), A. C. Regis, I. M. Pepe (Universidade Federal da Bahia) Experimental analysis of the influence of automotive air conditioning in fuel consumption in light duty vehicles, I. Dias, L. Leal, R. M. Valle (Universidade Federal de 9:50 2114 COMB36 Minas Gerais), P. Furtado Filho, M. D. B. Ferreira (Centro de Inovação e Tecnologia SENAI) 10:10 Coffee-break TIME CODE Environmental Engineering Study of calcium looping technology for carbon capture, K. Vieira, I. Ávila 10:40 2252 COMB37 (Universidade Estadual Paulista), G. L. A. A. Ferrufino, T. S. Neto (Instituto Nacional de Pesquisas Espaciais) Sensitivity study for a well blowout lagrangian model at campos basin using MOHID 11:00 2510 COMB38 platform, J. Lugon, P. Paiva, J. A. F. da Silva (Instituto Federal de Ciência e Tecnologia Fluminense), A. S. Neto (Universidade Estadual do Rio de Janeiro) Vortex tube equipped system for reducing emissions of underground storage tanks 11:20 2694 COMB39 hydrocarbons, C. A. O. Cabral, G. Stanescu (Universidade Federal do Paraná) Analysis of the performance of a porous radiant burner using alumina (Al2O3) spheres of 4 and 13mm in function of two thermal insulators, M. Veras (Universidade Federal 11:40 2744 COMB40 do Ceará), J. Duarte (Universidade de Fortaleza), C. A. Holanda (Universidade Federal do Ceará) 12:00 Lunch TIME CODE Combustion, Pirolisis and Gasification of Solids and Liquids Energetic potential of plastic residues, S. Carvalho, J. S. Pessoa Filho, C. Apolinário Jr., 13:30 0100 COMB41 L. Barbosa, V. L. Borges (Universidade Federal de Uberlândia) Influence of correlation between OEC and acoustic excitation in natural gas flames, A. 13:50 0428 COMB42 Santos (SENAI CIMATEC), A. R. B. Pereira (SENAI), L. Silva (SENAI CIMATEC) Experimental study of a lean premixed turbulent swirling flame stabilization, L. F. F. da 14:10 0808 COMB43 Silva, C. S. Mergulhão, L. Piton (Pontifícia Universidade Católica do Rio de Janeiro), P. Scouflaire, N. Darabiha (Université Paris-Saclay, France) Fluidized bed combustion of char pellets made from blends of shrubs and cork 14:30 1271 COMB44 residues, E. Marques,, C. Pereira, J. Paiva (Polytechnic of Viseu, Portugal), T. Ferreira, C. Pinho (Universidade do Porto, Portugal) Experimental study of laminar non premixed ethylene/air flames using laser induced incandescence and fluorescence, J. J. Cruz Villanueva, L. F. Figueira da Silva (Pontifícia 14:50 1593 COMB45 Universidade Católica do Rio de Janeiro), A. Fuentes (Universidad Técnica Federico Santa Maria, Chile) Implementation of the Flamelet-Generated-Manifold (FGM) for premixed turbulent 15:10 1601 COMB46 flames, A. C. Contini, C. A. Hoerlle, L. Maders, F. Pereira (Universidade Federal do Rio Grande do Sul), L. Zimmer (Ryerson University) Numerical studies of fuel-rich micro combustion: effect of N2 dilution on NOx emissions, P. Resende (Universidade Estadual de São Paulo), C. Pinho (Universidade 15:30 1830 COMB47 do Porto, Portugal), M. Ayoobi (Wayne State University, USA), A. Afonso (Universidade do Porto, Portugal) Characterization of residual biomass from agricultural and agroindustrial activities, A. 15:50 0668 COMB48 Durante, P. Curto-Risso, N. Tancredi, A. Amaya, G. P. Vergara (Universidad de la República, Uruguay)

21 ORAL SESSION MON / 4 DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Acoustics Boundary integral solution of sound propagation and scattering in non-uniform potential 8:30 0274 DYNM1 flows with a numerical Green’s function, S. Mancini, V. Rosa (Universidade de Southampton) A Study on Mineral Wools Acoustic Double Porosity Materials, G.P. Zanoni, R. Zoppi, A. Serpa 8:50 0329 DYNM2 (Universidade Estadual de Campinas) Ultrasound reflection from immersed laminates and its application in adhesive bond 9:10 0393 DYNM3 inspections, B. Junqueira, D. Castello, R. Leiderman (Universidade Federal do Rio de Janeiro) Fractional order calculus applied to generalize the Rott's linear thermoacoustics: an 9:30 1082 DYNM4 investigation toward energy regeneration in automobiles, C. A. Valentim Jr., F. Bannwart (Universidade Estadual de Campinas), S. A. David (Universidade de São Paulo). Multivariate Analysis Applied to Noise Problem of Compressors, Déborah Reis, F. do C. S. 9:50 1753 DYNM5 Vanzo, J. Reis, M. A. Duarte (Universidade Federal de Uberlândia). 10:10 Coffee-break TIME CODE Acoustics and vibroacoustics Prediction of sound propagation effects of installed jet configurations at subsonic operating 10:40 1924 DYNM6 conditions, R.G. da Fonseca, T. H. G. Lobato, L. Bastos (Universidade Federal do Pará) Numerical and analytical analysis of transmission loss of panels with insertion of Helmholtz 11:00 2686 DYNM7 resonators and porous material, M. Veloso, A. Lenzi, W. Santos (Universidade Federal de Santa Catarina) Two-dimensional ultrasound transducer array for acoustic radiation force impulse imaging, D. 11:20 0592 DYNM8 Santos, F. Cardoso., S. Furuie (Universidade de São Paulo) Analysis of vehicle interior noise correlation to road traffic accidents caused by driver 11:40 1572 DYNM9 sleepiness, A. Delfim, G.M. de A. Carvalho, B. Murta, B. S. de Lima (Universidade Federal de Minas Gerais) Wave propagation and frequency band structure in cylindrical shells, F. N. Pereira, J. M. C. 12:00 2358 DYNM10 dos Santos (Universidade Estadual de Campinas) 12:20 Lunch TIME CODE Acoustics and vibroacoustics, Control Evaluation of pipe silencers efficiency with internal geometry optimized for noise control in 13:30 2097 DYNM11 specific frequency ranges using the finite element technique, B. Marangoni, I. N. C. Nunez, R. H. de Oliveira Filho (Universidade Federal do Triângulo Mineiro) Vibration’s impact on worker when using industrial machine, H. Augusto (Universidade Federal de Minas Gerais), J. de S. Ramos (Universidade Estadual do Rio de Janeiro), B. A. L. 13:50 2565 DYNM12 M. Pereira (Faculdade Pitágoras), L. Pinto (Pontifícia Universidade Católica de Minas Gerais), J. C. de Jesus (Faculdade Pitágoras) Behavior of H_inf and H_2 norms as objective functions in the positioning of active elements 14:10 0107 DYNM13 in vibration control, A. L. Soubhia, A. Serpa (Universidade Estadual de Campinas) Active vibration control of a flexible structure by using generalized predictive control, E. 14:30 0173 DYNM14 Taketa, D.A. Colombo, F. A. Lara-Molina, E. H. Koroishi (Universidade Tecnológica Federal do Paraná) Robust control of a non-minimum phase multivariable system, D.B. Rossato (Instituto 14:50 0324 DYNM15 Tecnológico de Aeronáutica) Maneuvering and control of vector tugs in maritime simulators – an actuation model 15:10 0394 DYNM16 subjected to hydrodynamic and wind effects during pull operations, R. D. Barrera, E. A. Tannuri (Universidade de São Paulo) Robust control applied to a beam of composite material using electromagnetic actuators, C. 15:30 1115 DYNM17 A. X. da Silva, D. A. Colombo, F. A. Lara-Molina, E. H. Koroishi, A. Faria (Universidade Tecnológica Federal do Paraná)

22 ORAL SESSION TUE / 5 DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Control Vibration suppression of strongly nonlinear structure by means of nonlinear switching shunt circuits, T. M. P. Silva (Universidade de São Paulo), M. Clementino (Escola de Engenharia de 8:30 1173 DYNM18 São Carlos), V. C. de Sousa, D. D'Assunção (Universidade de São Paulo), W. Vieira (Escola de Engenharia de São Carlos), C. De Marqui Jr. (Universidade de São Paulo), J.A. de C. Dias (Escola de Engenharia de São Carlos) Optimum design of a set of dynamic neutralizers to passive vibration control considering 8:50 1206 DYNM19 physical parameters, location and viscoelastic material variable, F. Silva, C.A. Bavastri (Universidade Federal do Paraná) Control of pneumatic valves with friction using algebraic estimators, G. S. Vicinansa, C. Garcia, 9:10 1343 DYNM20 P. S. P. da Silva (Universidade de São Paulo) LQR control for a self-balancing unicycle, G. P. das Neves, B. A. Angélico(Universidade de 9:30 1453 DYNM21 São Paulo) Inverted pendulum damper design parameters for vibration control in tall buildings, P. B. 9:50 1612 DYNM22 Júnior, M. V. G. de Morais, S. Avila (Universidade de Brasília) 10:10 Coffee-break TIME CODE Control Model predictive control applied to waypoint-based guidance with obstacle avoidance of an 10:40 1615 DYNM23 unmanned aircraft, L. J. T. de Oliveira, D. A. dos Santos (Instituto Tecnológico de Aeronáutica) Comparison of Fuzzy Type-2 and Conventional Fuzzy Controllers Tuned by Ant Colony 11:00 1934 DYNM24 Optimization, F. M. U. de Araújo, M. S. F. F. Cavalcante, B. Vasconcellos, W. Mendes (Universidade Federal do Rio Grande do Norte) Fault-tolerant control of an underactuated system using a generalization of the LQG/LTR 11:20 2023 DYNM25 method, E. Madalena. , K. H. Kienitz (Instituto Tecnológico de Aeronáutica) Vibration control of smart structures with a fuzzy sliding mode control scheme, P. Medeiros, 11:40 2051 DYNM26 W. M. Bessa (Universidade Federal do Rio Grande do Norte), M. Savi (Universidade Federal do Rio de Janeiro), A. S. de Paula (Universidade de Brasília) 12:00 Lunch TIME CODE Control Hybrid bipolar stepper motor control by variable gain PID controller, I. C. Silveira, R. A. C. 13:30 2271 DYNM27 Laranja (Universidade Federal do Rio Grande do Sul) Sliding mode control of a flexible rotating system subject to concentrated dry friction, A. D. 13:50 2455 DYNM28 Santos (Universidade de São Paulo), A. Fleury (Centro Universitário da FEI) Controller by mixed-sensitivity H∞ design (S/KS/T) for Lurie type systems, R. Pinheiro, D. 14:10 2671 DYNM29 Colón (Universidade de São Paulo) Heavy-duty truck Platooning: A Review, A. de S. Mendes (Escola Politécnica da Universidade 14:30 0843 DYNM30 de São Paulo), A. Fleury, Marko Ackermann, F. Leonardi (Centro Universitário da FEI) Velocity and posture selection for torque optimization in manipulators with two-dimensional 14:50 0859 DYNM31 force requirements, D. G. G. Rosa, M. A. Meggiolaro (Pontifícia Universidade Católica do Rio de Janeiro), J. F. S. Feiteira (Universidade Federal Fluminense) 15:10 ------15:30 ------

23 ORAL SESSION WED / 6 DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Dynamics Damage detection in a cantilever beam by a stochastic optimization algorithm through the 8:30 0157 DYNM32 variation of the natural frequencies, G. Zeni, L. Miguel (Universidade Federal do Rio Grande do Sul), L. F.Miguel (Universidade Federal de Santa Catarina) A Numerical Methodology for Designing a Viscoelastic Vibration Neutralizer with Tubular 8:50 0198 DYNM33 Geometry and Constrained Layers, E. M. O. Lopes, I. F. Rodrigues, J. Pereira, (Universidade Federal do Paraná) Analysis of blade distribution for less static unbalance, J. C. Petras, R. Viale (Universidad 9:10 0293 DYNM34 Tecnologica Nacional Facultad Regional Avellaneda), G. D. Silveira, J. T. Voukelatos (Universidad Tecnologica Nacional) Optimal placement of sensors for the output feedback control of structures using quadratic 9:30 0396 DYNM35 performance criterion, H. Cruz (Universidade de São Paulo), M. A. Trindade (Escola de Engenharia de São Carlos) Adaptive enrichment of the generalized finite element method based on the friberg error 9:50 0533 DYNM36 indicator, M. Malacarne, M. Arndt, R. D. Machado, P. Weinhardt, T. Petroli (Universidade Federal do Paraná) 10:10 Coffee-break TIME CODE Dynamics The Generalized Finite Element Method applied to dynamic transient analysis, L. C. Debella, 10:40 0535 DYNM37 M. Arndt, R. D. Machado (Universidade Federal do Paraná) Numerical analysis of new superelastic SMA dampers for mechanical vibration control in rotor system, R. Senko (Universidade Federal da Paraíba), C. J. de Araujo (Universidade Federal de 11:00 0554 DYNM38 Campina Grande), M. C. Rodrigues (Universidade Federal da Paraíba), A. A. Silva (Universidade Federal de Campina Grande) Impedance control for assistance in cargo handling, F. Leonardi, S. Monteiro, S. Delijaicov, M. 11:20 0645 DYNM39 Ackermann, F. Leonardi (Centro Universitário da FEI) Evaluation of a smartphone effectiveness as an inexpensive tool for vibration analysis in 11:40 0901 DYNM40 vehicular comfort, R. M. K. Cargnin, G.K. Lunkes, C. E. de Souza (Universidade Federal de Santa Maria) 12:00 Lunch TIME CODE Dynamics Inverse stochastic identification of unmanned parachute launching point, D. Sousa, A. B. 13:30 0932 DYNM41 Caldeira, D. L. Fernandes (Instituto Militar de Engenharia) Experimental bench for evaluation of whole body vibration in automotive seats, H. F. Moore 13:50 0992 DYNM42 (Universidade de Brasília) Influence of the discretization method on the performance of state observers applied in a 14:10 1050 DYNM43 rotating system, L. Oliveira, G. P. de Melo (Universidade Estadual Paulista) The influence of speed and slope angle on wheelchair propulsion patterns: an optimal control 14:30 1154 DYNM44 study, M. Ackermann, V. I. Cuerva, F. Leonardi (Centro Universitário da FEI) Modeling and simulation of an aircraft hybrid-wing tilt, J. L. Moreira (Universidade Federal 14:50 1261 DYNM45 Rural do Semi-arido) Dimensionless factors to design hydropneumatic suspension systems, W. H. C. Sanchez, E. L. 15:10 1450 DYNM46 F. Fortaleza (Universidade de Brasília), A. Benine Neto (University of Bordeaux, France) A comparison between on-axis and off-axis measurements during machining operations, A. R. Raposo (Escola de Engenharia de São Carlos), L. de Oliveira (Universidade de São Paulo), 15:30 1697 DYNM47 A. L. de Mello (Escola de Engenharia de São Carlos), R. Coelho, R. G. dos Santos (Universidade de São Paulo)

24 ORAL SESSION THU / 7 DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Dynamics Analysis of a dynamic system subjected to an impulsive and internal contact force, G. S. 8:30 1937 DYNM48 Rodrigues, H. I. Weber (Pontifícia Universidade Católica do Rio de Janeiro) Evaluation of statistical energy analysis parameters through finite element method applied to 8:50 2033 DYNM49 structures employed in naval applications, J. Guimarães, G. Quixaba, N. Soeiro, L. Bastos (Universidade Federal do Pará) The influence of a crack in the dynamic behavior of a flexible disc, B. Rende, I. B. da Silva, T. 9:10 2053 DYNM50 Morais, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) Predictive maintenance based on mechanical unbalance severity analysis of rotating 9:30 2082 DYNM51 machines, D. Martins, T. de M. Prego, A. Lima , D. Hemerly, F. L. e Silva (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Experimental validation of robust model based balancing approach, V. Carvalho, A. Dourado, 9:50 2087 DYNM52 A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) 10:10 Coffee-break TIME CODE Dynamics A numerical investigation on near-field acoustic levitation, F. M. Ferreira Jr, G. Zuffi, F. Lobato, 10:40 2099 DYNM53 P. P. R. Nishida, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) Modeling of an impact damper submitted to forced vibration from a nonlinear contact force 11:00 2107 DYNM54 mode, M. Albuquerque, R. Pederiva (Universidade Estadual de Campinas) Movement analysis: using video image, F. Aureliano, R. C. Carvalho (Centro Universitário do 11:20 2260 DYNM55 Sul de Minas), A. Lopes (Universidade Federal de Itajubá) Modal parameters identification methods based on output-only, J. T. de Souza, N. Barbieri 11:40 2347 DYNM56 (Pontifícia Universidade Católica do Paraná) 12:00 Lunch TIME CODE Dynamics, Multibody Systems, Nonlinear Dynamics Identification and diagnosis of damage in automotive gearbox, G. S. V. Barbieri, N. Barbieri, B. 13:30 2348 DYNM57 Martins, L. Barbieri (Pontifícia Universidade Católica do Paraná) Theoretical and experimental analysis of hydrodynamic and thermohydrodymic models of 13:50 2372 DYNM58 cylindrical bearings, J. Barbosa, L. Sicchieri, A. Dourado, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) Dynamic Analysis of a Geodesic Dome, L. Barbieri, N. Barbieri (Pontifícia Universidade 14:10 5951 DYNM59 Católica do Paraná), R. D. Machado (Universidade Federal do Paraná) Mechanical efficiency determination of a dedicated hybrid transmission using graph and screw theories: a case study, M. B. de Souza, R. de S. Vieira, D. Martins, H. Cazangi 14:30 0405 DYNM60 (Universidade Federal de Santa Catarina), L. P. Laus (Universidade Tecnológica Federal do Paraná) Modeling of a 4-DOF control moment gyroscope, F. Y. Toriumi, B. A. Angélico, R. S. Barbosa, 14:50 1054 DYNM61 F. Martins, T. A. H. Coelho (Universidade de São Paulo) A neural genetic hybrid model for eigenstructure allocation in the LQR project in DFIG, R. 15:10 0831 DYNM62 SILVA (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão) 15:30 ------

25 ORAL SESSION FRI / 8 DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Vehicle Dynamics Optimization of vertical and lateral vehicle's dynamic response to different road profile 8:30 0275 DYNM63 irregularities using a quantum particle swarm optimizer, H. Gomes (Universidade Federal do Rio Grande do Sul), L. Coelho (Pontifícia Universidade Católica do Paraná) Self-powered active suspensions on smart vehicles, J. V. P. da Silva, J. C. Pereira (Universidade 8:50 0286 DYNM64 Federal de Santa Catarina) Comparison of rear or central bumper in motorcycles, F. Andrade (Pontifícia Universidade 9:10 0779 DYNM65 Católica de Minas), C. Vimieiro (Universidade Federal de Minas Gerais) Modeling of electronic differential system for vehicles with rear wheel drive, R. Y. Yamashita, F. 9:30 1153 DYNM66 M. Santiciolli , J. Eckert, E. Bertoti, F. G. Dedini, L. Silva (Universidade Estadual de Campinas) Effects of coil spring three dimensional stiffness on freight wagon lateral behavior, L. B. Baruffaldi (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo), G. F. M. dos 9:50 1858 DYNM67 Santos (Universidade Federal do Espírito Santo), A. A. dos Santos Jr (Universidade Estadual de Campinas) 10:10 Coffee-break

26 ORAL SESSION WED / 6 DYNM2 - Dynamics, Control, Vibrations and Acoustics (Room 4 – Bldg. 4 / Laranja) TIME CODE Rotordynamics Identification of dynamic coefficients in a journal bearing from experimental unbalance 8:30 0116 DYNM68 responses and inverse problem, A. Miliavacca, C. A. Bavastri (Universidade Federal do Paraná) Electric vehicle fan balancing variation according to speed, R. Moraes, T. Rolim 8:50 0178 DYNM69 (Universidade Federal de Pernambuco) Analysis of the bearings’ influence on the dynamic behavior of a rotating machine, C. 9:10 0366 DYNM70 Rother, T. Machado (Universidade Estadual de Campinas) Experimental identification of unbalance and shaft bow in a laval rotor by means of 9:30 0796 DYNM71 correlation analysis and model order reduction, F. D. Sanches (Universidade Federal do Rio Grande do Norte), R. Pederiva (Universidade Estadual de Campinas) Influence of cavitation effects in hydrodynamic bearings on rotor’s dynamic behavior, D. 9:50 0802 DYNM72 J. Ramos, G. B. Daniel (Universidade Estadual de Campinas) 10:10 Coffee-break TIME CODE Rotordynamics Fault diagnostic for rotating machines using Bayesian networks, N. Tyminski, H. F. de 10:40 0809 DYNM73 Castro (Universidade Estadual de Campinas) Evaluation of texturing effects on hydrodynamic behavior of journal bearings, L. I. 11:00 1000 DYNM74 Ramos, G. B. Daniel (Universidade Estadual de Campinas) On the whirling direction of a probabilistic, undamped and asymmetric laval rotor model 11:20 1010 DYNM75 subjected to residual unbalance, A. Jambersi, S. da Silva, J. Pereira, A. Turra (Universidade Estadual Paulista Julio de Mesquita Filho) Evaluation of a multilevel algorithm to study the hydrodynamic behavior of journal 11:40 1486 DYNM76 bearings, L. I. Ramos, G. B. Daniel (Universidade Estadual de Campinas) 12:00 Lunch

27 ORAL SESSION THU / 7 DYNM2 - Dynamics, Control, Vibrations and Acoustics (Room 4 – Bldg. 4 / Laranja) TIME CODE Rotordynamics Experimental validation of an onboard rotor FEM model, M. S. Sousa Jr, V. T. S. D. Claro, A. A. 8:30 1956 DYNM77 Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) Numerical and experimental analysis of a cracked shaft based on static and dynamic 8:50 2071 DYNM78 responses, I. B. da Silva, T. Morais, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) A comparison between composite rotordynamics modeling theories, P. C. P. de F. Barbosa, V. 9:10 2073 DYNM79 T. S. D. Claro, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) A shell based FEM model for thick walled composite rotors, V. T. S. D. Claro, P. C. P. de F. 9:30 2118 DYNM80 Barbosa, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) 9:50 ------10:10 Coffee-break TIME CODE Structural Dynamics Investigation of whole body vibration in an industrial plant: comfort and health 10:40 0260 DYNM81 measurements, H. Gomes, N. Osores (Universidade Federal do Rio Grande do Sul) Damage detection on aluminum beams using vibration-based method and artificial neural 11:00 0583 DYNM82 networks, H. Gomes, N. Osores (Universidade Federal do Rio Grande do Sul) Application of the differential transform method in mechanical vibration problems, A. Ribeiro 11:20 1042 DYNM83 (Universidade Federal de Itajubá) 11:40 ------12:00 Lunch TIME CODE Structural Dynamics Effects of linear resonators on the aeroelastic behavior of a plate-like wing, J. H. R. Dainezi, C. 13:30 1332 DYNM85 de Marqui Jr (Universidade de São Paulo) Free vibration isogeometric analysis of CAD mapped trusses, M. Rauen, R. D. Machado, M. 13:50 1375 DYNM86 Arndt (Universidade Federal do Paraná) Identification of three-dimensional equivalent material properties for laminated disks pack of 14:10 1535 DYNM87 electric machine stators with stress-stiffening effect, J. C. Marcon, A. Lenzi, O. M. Silva (Universidade Federal de Santa Catarina) Identification of modals parameters of transmission line cable, M. Calado, N. Barbieri, G. de S. 14:30 1952 DYNM88 V. Barbieri, M. J. Mannala (Pontifícia Universidade Católica do Paraná) Band gaps in plates and cylindrical shells with 1D periodic elastic properties, R. Sousa, J.-M. 14:50 1982 DYNM89 Mencik, J. M. C. dos Santos (Universidade Estadual de Campinas) Suspension optimization for a electrical machine assembled in a rigid base panel, A. Lenzi 15:10 2685 DYNM90 (Universidade Federal de Santa Catarina), A. A. P. Sarda (Universidade Federal do Paraná) 15:30 ------

28 ORAL SESSION THU / 7 ENACEM - Education Symposium (Room 1 – Bldg. 4 / Laranja) TIME CODE ENACEM Avaliação quadrienal 2013-2016 dos programas de pós-graduação das Engenharias III, E. N. 13:30 Invited Mamiya (Universidade de Brasília) Leading engineers to the future: an artificial intelligence approach for engineering creativity 14:10 0538 ENACEM1 support, L. F. de C. Botega, J. Silva (Universidade Federal de Santa Catarina) Fast Girls Project: Encouraging girls in STEM, D. M. Viana, B. X. de M. do Nascimento, E. Sakazaki, L. Matos, M. O. Ananias, A. S. de Paula , M. A. M. Shzu, S. Avila, V. Costa, G. 14:30 2445 ENACEM2 Lopes, I. Cristian, K. Lima, K. A. Costa, S. Ferreira, T. M. C. de Almeida (Universidade de Brasília) Risk analysis in chemistry laboratory, K. C.O.Marques, A. Dias, L. S. Yoshida, A. T. de Siqueira 14:50 1364 ENACEM3 Neto (Universidade Federal de Santa Catarina) Bicycles and motorcycles as an educational object for modeling, analysis and simulation of 15:10 1681 ENACEM4 stability, speed, suspensions, attitude and trajectory control, M. Speranza N., M. Assad, V. S. Medeiros (Pontifícia Universidade Católica do Rio de Janeiro) A Study on polygonal turning, L. Oliveira (Universidade Federal de Santa Maria), J. 15:30 2278 ENACEM5 Cavalcante (Bruning Tecnometal Ltda.), L. Oliveira (Universidade Federal de Santa Maria)

29 ORAL SESSION MON / 4

ENTS1 - Energy and Thermal Sciences (Room 6 - Bldg. 4 / Laranja) TIME CODE Applied Heat and Mass Transfer Analytical solution for the transient heat transfer problem with variable source term 8:30 0242 ENTS1 in a nuclear fuel rod, F. A. Soares, P. Araujo, F. Scofano, N. R. Guedes (Instituto Militar de Engenharia) Analysis of turbulence-radiation interaction in a methane-air diffusion flame, F. 8:50 0276 ENTS2 França, G. Fraga, A. P. Petry (Universidade Federal do Rio Grande do Sul) Effects of turbulence-radiation interaction in a non-premixed turbulent methane-air 9:10 0591 ENTS3 flame, F. França, L. D. Lemos, F. R. Centeno (Universidade Federal do Rio Grande do Sul) Experimental investigations of turbulence promoters applied to heat transfer 9:30 0624 ENTS4 applications, R. Gontijo, A. Júnior (Universidade Estadual de Campinas), T. S. Ferreira (Universidade de Brasília) Experimental analysis of the transient behavior of an engine cooling radiator, C. 9:50 0793 ENTS5 Albuquerque N., K. Rodrigues, J. Schiavon, L. Novazzi (Centro Universitário da FEI) 10:10 Coffee-break TIME CODE Applied Heat and Mass Transfer Application of the weighted-sum-of-gray-gases model to non-homogeneous 10:40 0857 ENTS6 H2O/CO2 mixtures for media with non-gray walls, F. França, R. J. C. da Fonseca (Universidade Federal do Rio Grande do Sul) Numerical and experimental analysis of a small scale apparatus to studies the thermal performance of reflexive insulation to building roofings, S. Guths 11:00 1017 ENTS7 (Universidade Federal de Santa Catarina), C. Michels (Universidade Federal do Amazonas), R. R. Storm (Universidade Federal de Santa Catarina) WSGG correlations based on HITEMP2010 for computation of radiation in high 11:20 1025 ENTS8 pressure conditions, F. França, F. R. Coelho (Universidade Federal do Rio Grande do Sul) Experimental validation of an AMR model for magnetic field - fluid flow 11:40 1079 ENTS9 synchronization analysis, A. Nakashima, S. L. Dutra, P. Trevizoli, J. Barbosa (Universidade Federal de Santa Catarina) 12:00 Lunch TIME CODE Applied Heat and Mass Transfer Influence of the heat transfer characteristics of a helical coil on the water 13:30 1119 ENTS10 consumption and cooling time of home-brewed wort, R. G. Oliveira, P. N. Rubbo (Universidade Federal de Santa Catarina) Comparison of different thermal models to estimate thermal properties, R. G. 13:50 1150 ENTS11 Oliveira, P. N. Rubbo (Universidade Federal de Santa Catarina) Experimental research of capillary structures technologies for heat pipes, T. A. Alves, 14:10 1170 ENTS12 L. Krambeck, G. A. Bartmeyer, D. Fusão, P. H. D. dos Santos (Universidade Tecnológica Federal do Paraná) Analysis of heat transfer in steel billets during transport, K. N. Cançado, K. N. 14:30 1248 ENTS13 Cançado (Centro Federal de Educação Tecnológica de Minas Gerais), L. N. Soares (Universidade Federal de Minas Gerais) Heat transfer study in a CSP volumetric receiver for different porosities, T. S. da Silva, 14:50 1345 ENTS14 L. Thomazini, P. M. Guimarães (Universidade Federal de Itajubá) Coefficient estimation for heat transfer on vegetable macroporous media, P. S. Schneider (Universidade Federal do Rio Grande do Sul), A. Urquiola (Universidad 15:10 1354 ENTS15 de la República), G. Alvarez (Institut national de recherche en sciences et technologies pour l'environnement et l'agriculture), D. Flick (AgroParisTech), P. Curto-Risso (Universidad de la República) Convective and absolute instability in a porous medium with inclined temperature 15:30 1549 ENTS16 gradient, horizontal and vertical through flow, M. Schuabb, L. S. de B. Alves (Universidade Federal Fluminense)

30 ORAL SESSION TUE / 5

ENTS1 - Energy and Thermal Sciences (Room 6 - Bldg. 4 / Laranja) TIME CODE Applied Heat and Mass Transfer Using electrovalves as a flow distribution system for an active magnetic regenerator, 8:30 1587 ENTS17 S. L. Dutra, A. Nakashima, G. Hoffmann, J. Lozano, J. Barbosa (Universidade Federal de Santa Catarina) Review of frost density models over cold flat surfaces, A. R. A. Colmanetti (Escola de 8:50 1642 ENTS18 Engenharia de São Carlos), L. C. Gómez, C. Tibiriçá (Universidade de São Paulo) Wind influence in inspections by infrared thermography of concrete structures with 9:10 1648 ENTS19 anomalies, M. Milanez, S. Guths,I. J. Padaratz (Universidade Federal de Santa Catarina) Integral transform of transient micropolar fluid MHD flow between parallel porous vertical walls with radiation, H. K. Miyagawa, F. Pontes, I. Curcino (Universidade 9:30 1836 ENTS20 Federal do Pará), P. Pontes (Universidade Federal do Rio de Janeiro), E. Macêdo, J. Quaresma (Universidade Federal do Pará) Conductive pathways construction using genetic algorithm and constructal design, P. 9:50 2068 ENTS21 A. Montoya, J. A. Souza, D. Adamatti (Universidade Federal do Rio Grande - FURG) 10:10 Coffee-break TIME CODE Applied Heat and Mass Transfer Heat conduction in starch hydrolysis of barley malt in a cylindrical mashing vessel, L. 10:40 2122 ENTS22 A. Sphaier, L. Zamboni, B. L. de Aguiar (Universidade Federal Fluminense) Mathematical modelling of macrosegregation in ingot casting, M. de O. Assunção Jr 11:00 2168 ENTS23 (Universidade de São Paulo), M. Vynnycky (Royal Institute of Technology) Comparative energetic efficiency of materials for building flat roofs, P. I. B. de 11:20 2410 ENTS24 Queiroz, J. E. Ramis, A. G. Azevedo, E. L. Neto (Instituto Tecnológico de Aeronáutica) Thermal performance of a heat pump with solar evaporator in sunny environments, H. Augusto (Universidade Federal de Minas Gerais), F. N. Q. dos Santos (Centro 11:40 2567 ENTS25 Federal de Educação Tecnológica de Minas Gerais), J. J. G. Pabon, R. Koury, L. Machado (Universidade Federal de Minas Gerais) 12:00 Lunch TIME CODE Applied Heat and Mass Transfer Thermal performance analysis of a heat pump with solar evaporator, H. Augusto, A. 13:30 2575 ENTS26 A. Machado, O. R. S. Rodriguez, I. Z. L. Meyer (Universidade Federal de Minas Gerais), N. Oliveira (Pontifícia Universidade Católica de Minas Gerais) Design of an finned tube evaporator with cross-flow for a refrigeration machine operating with CO2 in subcritical cycle, H. Augusto, C. H. N. da Silva, I. Z. L. Meyer 13:50 2583 ENTS27 (Universidade Federal de Minas Gerais), G. Gama, L. Pinto (Pontifícia Universidade Católica de Minas Gerais) Test of two phase change materials for thermal energy storage, Carlos Pinho (Faculdade de Engenharia da Universidade do Porto), Luis Esteves (Faculdade de Engenharia da Universidade do Porto), Ana Magalhaes (Instituto de Engenharia 14:10 2670 ENTS28 Mecânica e Gestão Industrial), Victor Ferreira (Instituto de Engenharia Mecânica e Gestão Industrial), Carlos Pinho (Faculdade de Engenharia da Universidade do Porto) Nonlinear ARX model associated to neural networks to predict hygrothermal 14:30 2673 ENTS29 behavior of building materials, C. F. da Silva, R. Z. Freire (Pontifícia Universidade Católica), J. Virgone, A. Trabelsi (Université Claude Bernard Lyon 1) Thermal analysis of vsb-30 rocket payload, H. Machado (Instituto de Aeronáutica e 14:50 2720 ENTS30 Espaço), F. Franciscani, L. Cavicchiolo (Universidade do Vale do Paraíba) Coupled integral equations approach on the transient heat transfer problem in 15:10 2911 ENTS31 supercritical fluids, P. P. R. Machado (Universidade Federal do Rio de Janeiro), L. S. de B. Alves (Universidade Federal Fluminense) 15:30 ------

31 ORAL SESSION WED / 6 ENTS1 - Energy and Thermal Sciences (Room 6 - Bldg. 4 / Laranja) TIME CODE Heat and Mass Transfer Fundamentals Sweeping convection: a new convection mode by large particles, J. L. Lage (Southern 8:30 Invited Methodist University, USA) An algorithm to determine radiative properties of glazing systems using simple 9:10 0368 ENTS32 window performance indicators, S. R.-Castillo (Universidad del Bío-Bío), N. Mendes, L. M. Moura (Pontifícia Universidade Católica do Paraná) Solution of the heat conduction in solid-state electronics by integral transforms, D. 9:30 0426 ENTS33 Chalhub, L. M. Corrêa (Universidade Estadual do Rio de Janeiro) Improvements to the guarded hot plate apparatus to determine thermal 9:50 1007 ENTS34 conductivity, S. M. M. de L. e Silva, G. Souza, L. F. dos S. Carollo, S. M. M. de L. e Silva (Universidade Federal de Itajubá) 10:10 Coffee-break TIME CODE Heat and Mass Transfer Fundamentals Convection in a lid-driven cavity subject to a gravitational stable condition: effects of 10:40 1235 ENTS35 aspect ratio, I. M. Suyama, V. G. Poletto, F. C. de Lai, S. Junqueira (Universidade Tecnológica Federal do Paraná) Numerical simulation of convection in a lid-driven cavity filled with heterogeneous 11:00 1245 ENTS36 porous medium, A. Camargo, F. da S. Santos, V. G. Poletto, F. C. De Lai, S. Junqueira (Universidade Tecnológica Federal do Paraná) Boundary layer analysis of turbulence-radiation interaction in a non-reactive 11:20 1266 ENTS37 channel flow, F. França, G. Fraga, A. P. Petry (Universidade Federal do Rio Grande do Sul) Evaluation of droplet evaporation models for gas-liquid flow simulations, A. P. 11:40 1455 ENTS38 Pinheiro, J. M. Vedovoto, A. S. Neto (Universidade Federal de Uberlândia) Comparison between pennes and dual phase lag models for the bioheat transfer around a healthy and a tumorous thyroid, T. P. da C. Bittencourt, B. Lamien 12:00 1527 ENTS39 (Universidade Federal do Rio de Janeiro), L. A. B. Varon (University of Santiago de Cali), H. Orlande (Universidade Federal do Rio de Janeiro) 12:20 Lunch TIME CODE Heat and Mass Transfer Fundamentals Determination of Nukiyama and Leidenfrost temperatures for hydrocarbons using 13:30 2012 ENTS40 the droplet evaporation method, M. W. Reis, A. V. da S. Oliveira, R. G. dos Santos (Universidade Estadual de Campinas) Development of an experimental methodology of boiling phenomenon in the 13:50 2089 ENTS41 evaporator of a glass thermosyphon, P. H. D. dos Santos, D. O. de Souza, R. M. Davies, T. A. Alves (Universidade Tecnológica Federal do Paraná) Development of kinetic model for THF-hydrate formation, P. H. D. dos SANTOS, G. 14:10 2163 ENTS42 N. D. Dextre, A. V. L. Machado, R. Morales, A. Sum (Universidade Tecnológica Federal do Paraná) Modelling and simulation of a CPV/T system, M. M. Macias, T. H. S. Schmidt, V. de 14:30 2262 ENTS43 S. Britto, T. Oliveira, A. Brasil Jr (Universidade de Brasília) Onset of mixed convection in an adsorptive porous medium, G. F., L. A. Sphaier, L. S. 14:50 2811 ENTS44 de B. Alves (Universidade Federal Fluminense) Experimental setup for a bench scale multiple disks turbine (Tesla turbine), P. S. Schneider (Universidade Federal do Rio Grande do Sul), C. E. (Universidade 15:10 2917 ENTS45 Regional Integrada do Alto Uruguai e das Missões ), A. L. R. T. (Universidade Federal do Rio Grande do Sul), C. R. (Centro Universitário La Salle), J. C. da S. F. Vieira, G. P. Novo (Universidade Federal do Rio Grande do Sul) 3D numerical simulations of Rayleigh-Taylor instability, B. A. Duarte, A. S. Neto 15:30 6909 ENTS46 (Universidade Federal de Uberlândia)

32 ORAL SESSION THU / 7

ENTS1 - Energy and Thermal Sciences (Room 6 - Bldg. 4 / Laranja) TIME CODE Thermo-Economic Analysis and Energy Policy Electrical energy matrix changes and its impacts on energetic security, R. V. C. da S. 8:30 0383 ENTS47 G. Francisco, D. S. Siqueira, R. J. Silva, G. Menon (Universidade Federal de Itajubá) Analysis of thermal power plants cooling system in climate changes regards, R. V. C. 8:50 0384 ENTS48 da S. G. Francisco , D. S.Siqueira, R. J. Silva, G. Menon (Universidade Federal de Itajubá) On the improvement and accuracy in thermoeconomic diagnosis: dissipative 9:10 0909 ENTS49 component and exergy disaggregation, R. A. Lorenzoni, J. J. C. S. Santos, A. Lourenço, Jo. L. M. Donatelli (Universidade Federal do Espírito Santo) Comparative analysis of ORC for WHR in cement industry, F. R. P. Arrieta, L. F. 9:30 1013 ENTS50 Moreira (Pontifícia Universidade Católica de Minas Gerais) Costs assessment in a HAT cycle, F. R. P. Arrieta, H. J. J. da Siliveira (Pontifícia 9:50 1014 ENTS51 Universidade Católica de Minas Gerais) 10:10 Coffee-break TIME CODE Thermo-Economic Analysis and Energy Policy Current overview and future forecasts of natural gas in the worldwide electrical 10:40 1078 ENTS52 matrix, M. Q. Hilário, S. T. S. Silva, I. de O. Pereira, R. J. Silva (Universidade Federal de Itajubá) Technological aspects of electric power generation from MSW, F. R. P. Arrieta, I. H. M. 11:00 1083 ENTS53 da Silva, H. G. de Souza, C. A. Gomes Filho (Pontifícia Universidade Católica de Minas Gerais) Experimental tests of a Stirling engine for recovery of exhaust heat waste of internal combustion engine, L. B. Baruffaldi (Instituto Federal de Educação, Ciência e 11:20 1287 ENTS54 Tecnologia de São Paulo), G. F. M. dos Santos (Universidade Federal do Espírito Santo), A. A. dos Santos Junior (Universidade Estadual de Campinas) 11:40 ------12:00 Lunch

33 ORAL SESSION MON / 4

ENTS2 - Energy and Thermal Sciences (Room 7 - Bldg. 4 / Laranja) TIME CODE Numerical Heat Transfer Study of the heat transfer processes in gas turbine blades via finite element method, 8:30 0291 ENTS55 F. P. Da S. Muchick, S. Del Vecchio (Instituto Federal do Sudeste de Minas - Campus Juiz de Fora), F. Bastos (Universidade Federal de Juiz de Fora) Optimization of a plate-fin heat exchanger by differential evolution approaches, D. 8:50 0328 ENTS56 M. Rieger, V. Mariani, E. Martim (Pontifícia Universidade Católica do Paraná) 3D numerical simulations of natural convection in cavities using adaptive mesh 9:10 0463 ENTS57 refinement, B. A. Duarte, A. Silveira N. (Universidade Federal de Uberlândia) Influence of a bubble’s presence in thermal transfer of 3d numerical simulations in 9:30 0465 ENTS58 cavities, B. A. Duarte, A. Silveira N. (Universidade Federal de Uberlândia) Heat conduction analysis in layered media with adhesive defect via single domain formulation, integral transforms and finite difference, D. Knupp, F. Mascouto, L. 9:50 0516 ENTS59 Abreu, E. de L. Sanches (Universidade Estadual do Rio de Janeiro), L. A. Sphaier (Universidade Federal Fluminense) 10:10 Coffee-break TIME CODE Numerical Heat Transfer Analysis of heat transfer by conduction in cooling chambers with polyurethane 10:40 0561 ENTS60 plates, F. Costa, G. Donizeti (Universidade Estadual de Campinas) Mathematical modeling of heat transfer in rice vertical silo, V. Faoro, O. 11:00 0749 ENTS61 Khatchatourian, M. O. Binelo, R. Neutzling (Universidade Regional do Noroeste do Estado do Rio Grande do Sul) Numerical simulation of the heat transfer in canine knee joint during the situation of the therapeutic cooling – an analysis considering variable blood perfusion, C. 11:20 0867 ENTS62 Rodrigues, F. S. da Silva, R. Huebner, J. V. Toledo (Universidade Federal de Minas Gerais), A. Araújo (Pontifícia Universidade Católica de Minas Gerais), C. de M. Martins (Universidade Federal de Minas Gerais) Dynamic analysis of a three-phase reactor of fixed bed for petroleum and 11:40 1008 ENTS63 petrochemical industry, E. Anjos, J. Silva, J. D. da C. G. de Carvalho (Universidade de Pernambuco) 12:00 Lunch TIME CODE Numerical Heat Transfer Numerical analysis of the heat transfer through a heat treatment furnace, P. G. C. 13:30 1136 ENTS64 Martins, K. Souza, F. Barbosa, O. Shynkarenko (Universidade de Brasília) Shell and tube heat exchanger optimization using metaheuristics, H. da S.C. 13:50 1177 ENTS65 Goetten, C. Nascimento, V. Mariani (Pontifícia Universidade Católica do Paraná) Mathematical model for heat transfer in steel billets subjected to slow cooling, K. N. 14:10 1246 ENTS66 Cançado (Centro Federal de Educação Tecnológica de Minas Gerais), L. N. Soares (Universidade Federal de Minas Gerais) A numerical study of different configurations of pipes filled with porous media, R. 14:30 1288 ENTS67 Moro Filho (Universidade Federal do Rio Grande do Norte) Estimation of internal heat transfer coefficients in tree-dimensional ducts through the 14:50 1348 ENTS68 reciprocity functional approach: preliminary results, M. Colaco, I. Tougri (Universidade Federal do Rio de Janeiro) Numerical heat transfer modelling of a furnace under oxy-combustion for production 15:10 1355 ENTS69 of ceramic frits, E. Morsch Filho, T. Possamai, V. de P. Nicolau, R. Oba (Universidade Federal de Santa Catarina) Three-dimensional numerical study of staggered finned circular and elliptic tubes in forced convection, M. V. A. Pereira, J. V. C. Vargas (Universidade Federal do Paraná), 15:30 1401 ENTS70 J. A. Souza (Universidade Federal do Rio Grande - FURG), R. Matos (Universidade Federal do Paraná)

34 ORAL SESSION TUE / 5

ENTS2 - Energy and Thermal Sciences (Room 7 - Bldg. 4 / Laranja) TIME CODE Numerical Heat Transfer An inverse heat conduction study using time travelling regularization, E. dos S. 8:30 1439 ENTS71 Magalhães, N. A. M. Leite, R. G. D. da Silva, S. M. M. de L. e Silva (Universidade Federal de Itajubá) Study of solar chimney with OpenFOAM, L. Romeo, P. Galione, P. Curto-Risso 8:50 1446 ENTS72 (Universidad de la República) Numerical simulation of the temperature distribution of the human knee joint in neutral thermal conditions, C. de M. Martins, F. S. da Silva, R. Huebner 9:10 1476 ENTS73 (Universidade Federal de Minas Gerais), A. Araújo (Pontifícia Universidade Católica de Minas Gerais) Comparison of eigenproblem solution approaches for Dirichlet conditions in irregular 9:30 1542 ENTS74 domains via integral transforms, I. F. Pinheiro, L. A. Sphaier (Universidade Federal Fluminense), D. Knupp (Universidade Estadual do Rio de Janeiro) Numerical model for the evaluation of thermal effects in the evolution of methane loading and discharge by the adsorption method, R. Díaz (Centro Federal de 9:50 1691 ENTS75 Educação Tecnológica Celso Suckow da Fonseca), L. A. Sphaier (Universidade Federal Fluminense) 10:10 Coffee-break TIME CODE Numerical Heat Transfer Integral transformation of multidimensional heat conduction problems in 10:40 1906 ENTS76 heterogeneous media, A. P. de Almeida, C. P. N. Cotta, R. M. Cotta (Universidade Federal do Rio de Janeiro) Turbulence-radiation interactions in a spatially developing heated jet, J. Armengol, 11:00 2153 ENTS77 R. G. dos Santos (Universidade Estadual de Campinas) Numerical study of a single bubble dynamic in nucleate pool boiling, M. Andrade, E. 11:20 2191 ENTS78 M. Cardoso, J. B. C. Silva (Universidade Estadual Paulista Julio de Mesquita Filho) Theoretical analysis of printed circuit heat exchangers based in minichannels, K. 11:40 2275 ENTS79 Chen, C. P. N. Cotta (Universidade Federal do Rio de Janeiro) 12:00 Lunch TIME CODE Numerical Heat Transfer Comparison of the Monte Carlo and discrete ordinate methods for numerical 13:30 2329 ENTS80 simulation of nanoparticles assisted laser photothermal therapy, A. N. de Sousa, A. Bruno, A. Maurente (Universidade Federal do Rio Grande do Norte) Numerical simulations of natural convection and surface radiation in an open cavity 13:50 2429 ENTS81 with disconnected solid blocks, V. G. Nardi, A. L. de Souza, A. Franco (Universidade Tecnológica Federal do Paraná) Numerical analysis on laminar natural convection in a square cavity with different 14:10 2519 ENTS82 nanofluids, M. Silva, A. Novelli (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo) The effect of the radiative properties in porous media combustion, R. Moro Filho 14:30 2841 ENTS83 (Universidade Federal do Rio Grande do Norte) An explicit formulation for the thermal contact conductance estimation using 14:50 5518 ENTS84 truncated eigenfunction expansions regularization, A. Silva Neto, M. Guimarães, L. Abreu, D. Knupp (Universidade Estadual do Rio de Janeiro)

35 ORAL SESSION WED / 6

ENTS2 - Energy and Thermal Sciences (Room 7 - Bldg. 4 / Laranja) TIME CODE Biofuels and Alternative Energy Exergy analysis of biogas production in ethanol distilleries, R. N. Nakashima, S. de O. 8:30 0185 ENTS85 Junior (Universidade de São Paulo) Thermal and energetic analysis of eucalyptus urosemente, L. H. da S. Ignacio, P. 8:50 0230 ENTS86 Santos, S. Carvalho (Universidade Federal de Uberlândia) Optimization of a standalone PV-wind-diesel-battery hybrid system feasible for a university restaurant in Recife, Brazil, W. F. A. Borges (Instituto Federal de Pernambuco), A. M. Araújo, A. A. C. Silva (Universidade Federal de Pernambuco), C. 9:10 0238 ENTS87 R. Ferreira (Universidade Estadual do Sudoeste da Bahia), C. C. de A. Bezerra, C. L. dos Santos, E. C. R. Fernandes, G. M. de Melo, G. J. A. M. Rocha, L. I. de Andrade (Universidade Federal de Pernambuco) Techno-economic analysis of torrefaction, drying and briquetting of eucalyptus for 9:30 0279 ENTS88 energy generation, B. S. Silva, E. Torres, J. A. M. da Silva (Universidade Federal da Bahia) Development of a hybrid energy generation system through electromagnetic 9:50 0464 ENTS89 induction, B. Diniz, L. Gusmão (Universidade Federal da Bahia) 10:10 Coffee-break TIME CODE Biofuels and Alternative Energy Dimensioning of a mobile anaerobic biorreator - for field biomass analysis, J. D. I. Silveira (Centro Universitário UNIVATES), C. H. Lagemann (Universidade do Vale do 10:40 0617 ENTS90 Taquari), G. Lago(ABCM), O. Konrad (Centro Universitário UNIVATES), R. Garcia, R. C. Izquierdo(Universidade Federal do Rio Grande do Sul) Experimental determination of laminar burning velocity of biogas at pressures up to 11:00 0672 ENTS91 5 bar, L. Pizzuti , C. A. Martins , L. R. dos Santos (Instituto Tecnológico de Aeronáutica) Biodiesel production from microwave irradiated reactor using homogeneous and 11:20 0787 ENTS92 heterogeneous catalyst, S. Rabelo, L. Oliveira, A. França (Universidade Federal de Minas Gerais) Thermal modeling of cavity-receiver for concentrated solar energy, L. F. do Canto, J. 11:40 0861 ENTS93 R. S. Moreira (Universidade de São Paulo) 12:00 Lunch TIME CODE Biofuels and Alternative Energy Experimental analysis of the behavior of an absorption refrigeration system using a 13:30 0999 ENTS94 residential solar heating system, M. N. E. REIS, C. A. C. e Costa, A. C. de M. Cunha, M. M. Ribeiro, N. S. da S. Kischka (Pontifícia Universidade Católica de Minas Gerais) Geometric optimization of solar cells by constructal law, R. A. Gouvea (Universidade 13:50 1096 ENTS95 Federal do Rio Grande - FURG), M. L. Moreira (Universidade Federal de Pelotas), J. A. Souza (Universidade Federal do Rio Grande) Photovoltaic panel monitoring system, D. Soares, M. A. F. COSTA (Universidade 14:10 1147 ENTS96 Estadual do Rio de Janeiro) Conception and evaluation of a tracking system for a linear fresnel concentrator, V. 14:30 1152 ENTS97 C. Pigozzo Filho, P. Brogni, J. P. G. Trancoso, G. M. Cascaes, V. C. Pigozzo Filho, A. B. de S., J. Passos (Universidade Federal de Santa Catarina) A new mathematical model for compression of biomass powders, E. M. T. Marques 14:50 1265 ENTS98 (Polytechnic of Viseu), T. Ferreira (CEFT), J. L. M. de S. Paiva, C. Pinho (Faculdade de Engenharia da Universidade do Porto) Experimental evaluation of heat loss from a multi-tube trapezoidal cavity receiver for a linear fresnel solar concentrator considering natural and forced convection 15:10 1304 ENTS99 conditions, S. Sousa, A. B. de Sa, V. C. Pigozzo Filho, J. Passos (Universidade Federal de Santa Catarina)

36 ORAL SESSION THU / 7

ENTS2 - Energy and Thermal Sciences (Room 7 - Bldg. 4 / Laranja) TIME CODE Biofuels and Alternative Energy Modeling and analysis of an electric vehicle using PAMVEC, S. C. A. Almeida, F. 8:30 1852 ENTS100 Vieira (Universidade Federal do Rio de Janeiro) Evaluation of the technical feasibility of the use of biogas of landfill for generation of electrical energy according to different energy conversion technologies, A. L. Costa 8:50 1891 ENTS101 (Universidade Federal de Minas Gerais), W. Ferreira (Universidade Federal de Minas Gerais), B. Flausino (Universidade Federal de Ouro Preto) Design of wind turbine of low power for coast zones in Colombia, L. Carlos 9:10 1944 ENTS102 (Corporación Universidad Piloto), R. D. H. Beleño (Universidad Piloto de Colombia) Combustion analysis of d-limonene as an additive to diesel-biodiesel blends in compression ignition engines, W. K. D. C. Saruhashi, D. Módolo (Universidade 9:30 1965 ENTS103 Estadual Paulista), L. E. R. Pereira (Universidade Estadual Paulista), L. Micheli (Universidade Estadual Paulista) Wake characterization in row array of hydrokinetics turbines, V. de S. Britto, R. C. F. 9:50 2121 ENTS104 Mendes, A. Brasil Jr, T. Oliveira (Universidade de Brasília) 10:10 Coffee-break TIME CODE Biofuels and Alternative Energy Microstructural, morphological and electrochemical analysis of semiconductor spin- coated thin films electrodes for dye-sensitized solar cells with natural dyes as 10:40 2136 ENTS105 sensitizers, D. Sampaio, B. Ferreira, S. B. Rajendran, S. Yesudass, A. Barros (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Synthesis and characterization of flexible carbon fibers coated with polyaniline/manganese hexacyanoferrate nanoparticles for supercapacitors, M. 11:00 2232 ENTS106 Maier, S. B. Rajendran, D. Sampaio, A. Barros (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Potential of bioelectricity generation from biogas of landfills located in São Paulo 11:20 2365 ENTS107 city, Brazil, M. C. Guimarães, R. F. S. Paulino, J. L. Silveira (Universidade Estadual Paulista Julio de Mesquita Filho) Service mileage assessment of lubricant charge used in engines fueled with biodiesel 11:40 2434 ENTS108 B100, J. Velásquez, F. Pereira, J. Riechi (Universidade Tecnológica Federal do Paraná) 12:00 Lunch TIME CODE Biofuels and Alternative Energy Overview an ethanol steam reforming for hydrogen production, C. H. G. de Brito, L. 13:30 2447 ENTS109 Soares, C. Maia, J. R. Sodré (Pontifícia Universidade Católica de Minas Gerais) Annual energy production from a horizontal axis small wind turbine using NACA 13:50 2611 ENTS110 4412 airfoil, W. Okita, L. F. M. Moura, K. Ismail (Universidade Estadual de Campinas) Development of a fuel cell, H. J. dos Anjos (Centro Universitário UNA), D. V. dos S. 14:10 2618 ENTS111 Santos (Universidade Federal de Minas Gerais) Study of the oxidation of automotive lubricants contaminated with biodiesel and 14:30 2751 ENTS112 blends, M. T. dos S. Silva, S. Alves, R. Silva, R. Silva (Universidade Federal do Rio Grande do Norte) Project and development of a system for detection of volumetric fraction of ethanol 14:50 2896 ENTS113 contained water, D. Luceiro (Universidade Federal de Santa Maria), M. Santos (Tecvix Desenvolvimento e Inovação Ltda) Development of a hybrid alternative generator for complementation of small 15:10 2906 ENTS114 consumer power units, M. N. E. Reis, F. Batista, P. Souza (Pontifícia Universidade Católica de Minas Gerais) 15:30 ------

37 ORAL SESSION WED / 6

ENTS3 - Energy and Thermal Sciences (Room 4 - Bldg. 4 / Laranja) TIME CODE Thermodynamics and Thermal Systems An object-oriented platform for high-fidelity modeling of power plants, C. Celis 8:30 0019 ENTS115 (Pontifícia Universidad Católica del Perú), S. Barros (GT2 Energia) A fuel-and-product model of concentrating solar power systems for application in exergy analysis, T. de O. Macedo (Centro Federal de Educação Tecnológica Celso 8:50 0219 ENTS116 Suckow da Fonseca), M. E. Cruz (Universidade Federal do Rio de Janeiro), L. dos S. R. VIEIRA (Centro de Pesquisas de Energia Elétrica) Pressure ratio influence over the performance of a scroll expander, P. E. B. de Mello, 9:10 0232 ENTS117 F. V. de Oliveira , F. M. F. Silva (Centro Universitário da FEI) A first comparison of different exergy analysis applied to the human body to assess 9:30 0379 ENTS118 thermal comfort conditions, T. J. da S. Ribeiro, C. E. K. Mady (Universidade Estadual de Campinas) Thermal exploitation of the vinasse through an organic Rankine cycle, A. L. de Brito, 9:50 0517 ENTS119 M. R. F. Santos, M. Modesto (Universidade Federal do ABC) 10:10 Coffee-break TIME CODE Thermodynamics and Thermal Systems Thermoeconomic optimization of Kalina cycle systems for waste heat recovery in a 10:40 0695 ENTS120 Diesel engine, M. Schiaffino, L. Araújo, A. Morawski, M. A. Barone, C. C. M. Cunha, J. L. M. Donatelli, J. J. C. S. Santos (Universidade Federal do Espírito Santo) Evaluation of CHP system with diesel engine based on SPECO approach, E. J. C. 11:00 0697 ENTS121 Cavalcanti, M. Lima, G. F. de Souza (Universidade Federal do Rio Grande do Norte) Exergy analysis of a cogeneration power plant, E. J. C. Cavalcanti, G. F. de Souza, M. 11:20 0712 ENTS122 Lima (Universidade Federal do Rio Grande do Norte) On the use of heat exchange’s devices in order to improve adsorption and desorption 11:40 0917 ENTS123 processes of ANG tanks, B. Chieregatti, J. de S. B. Lima, E. Volpe (Universidade de São Paulo), M. Hayashi (Universidade Federal do ABC) 12:00 Lunch TIME CODE Thermodynamics and Thermal Systems Development of a simulation software for thermal systems, P. C. Gesualdo Jr, M. N. 13:30 0933 ENTS124 E. Reis (Pontifícia Universidade Católica de Minas Gerais) Influence of geometric parameters in thermal behavior of the receiver of a Linear 13:50 0958 ENTS125 Fresnel Reflector system, P. Scalco, J. Copetti, M. H. Macagnan (Universidade do Vale do Rio dos Sinos) Cost evaluation of a turbogeneration system driven by high efficiency aeroderivative 14:10 0959 ENTS126 gas turbines equipped with air inlet cooling system (TIC) in Rio de Janeiro city, D. Chalhub (Universidade Estadual do Rio de Janeiro) Numerical / experimental methodology for determination simultaneous and 14:30 0969 ENTS127 monitoring of thermal properties and internal temperature of equipment in situ, S. Carvalho, B. H. O. Mulina, V. L. Borges (Universidade Federal de Uberlândia) Analysis of thermodynamic cycles for cogeneration in cement industry, F. R. P. 14:50 1012 ENTS128 Arrieta, T. Assis, B. Tavares (Pontifícia Universidade Católica de Minas Gerais), C. Silva (Cemig Geração e Transmissão SA) Damage initiation in a brittle-elastic water-filled pore induced by a very small fluid 15:10 1028 ENTS129 temperature variation, M. L. Martins-Costa, H. da C. Mattos , L. Teixeira (Universidade Federal Fluminense) Hybridization of concentrated solar power and confined landfill gas for power 15:30 1116 ENTS130 generation – a Case Study, A. Filho, M. Siqueira (Universidade de Brasília)

38 ORAL SESSION THU / 7

ENTS3 - Energy and Thermal Sciences (Room 4 - Bldg. 4 / Laranja) TIME CODE Thermodynamics and Thermal Systems Optimal configuration of a floating combined cycle power plant for offshore 8:30 1118 ENTS131 applications, J. V. Guillen , M. M. L. dos Reis, W. Gallo (Universidade Estadual de Campinas) Energetic and exergetic analysis of supercritical CO2, organic Rankine and Kalina 8:50 1121 ENTS132 cycle for waste heat recovery in a FPSO unit, M. M. L. dos Reis, J. V. Guillen, W. Gallo (Universidade Estadual de Campinas) Exergy analysis of a coupled unit to produce electrical energy and cold water, R. 9:10 1179 ENTS133 Souza, J. Medeiros, C. A. Santos (Universidade Federal da Paraíba) Numerical solution of a thermal and fluid-dynamic problem involving phase change 9:30 1204 ENTS134 with moving source applied to TIG welding process, S. Carvalho, P. Bento, M. Miranda , M. G. A. dos Reis, V. L. Borges (Universidade Federal de Uberlândia) CFD flow analysis of a tesla turbine under motionless regime, P. S. Schneider, J. F. T. 9:50 1218 ENTS135 de Carvalho (Universidade Federal do Rio Grande do Sul), L. Rosa (Universidade Regional de Blumenau) 10:10 Coffee-break TIME CODE Thermodynamics and Thermal Systems Inhibition of carbon dioxide hydrates by ethanol and sodium chloride, M. M. Neto, A. 10:40 1232 ENTS136 Guembaroski, R. Morales , A. Sum (Universidade Tecnológica Federal do Paraná) Joule-Thomson coefficient prediction by using Cubic Plus Association (CPA) equation 11:00 1233 ENTS137 of state, M. M. Neto, E. T. Tiuman, M. V. R. Pereira, D. Bertoldi, R. Morales (Universidade Tecnológica Federal do Paraná) Multiphase flash in presence of hydrates and mixture of inhibitors, M. M. Neto, T. 11:20 1234 ENTS138 Sirino, D. Bertoldi, R. Morales, A. Sum (Universidade Tecnológica Federal do Paraná) Experimental analysis of a bench scale Tesla turbine, P. S. Schneider (Universidade Federal do Rio Grande do Sul), C. Ermel (Universidade Regional Integrada do Alto 11:40 1331 ENTS139 Uruguai e das Missões ), A. L. R. Thomazoni , J. C. da S. F. Vieira , G. Pettenuzzo (Universidade Federal do Rio Grande do Sul) 12:00 Lunch TIME CODE Thermodynamics and Thermal Systems Analysis of the effects of periodic maintenance of agricultural tractors through the 13:30 1353 ENTS140 method of experimental planning, P. S. Schneider, L. E. A. Ferrari, R. Donni (Universidade Federal do Rio Grande do Sul) Analysis of energy production using a municipal solid waste pyrolysis system and an 13:50 1447 ENTS141 internal combustion engine, E. M. Leal, L. A. Bortolaia, F. D. de S. Pereira (Universidade Federal de Ouro Preto) Thermodynamic modeling of a power cycle running indirect co-firing of coal and 14:10 1569 ENTS142 solid recovered fuel (SRF), F. Pereira(Universidade Federal da Integração Latino- Americana), P. S. Schneider (Universidade Federal do Rio Grande do Sul) Analysis of a solar chimney with double inlet by means of Venturi effect, C. A. Neto, 14:30 1610 ENTS143 T. de F. V. Bôas (Centro Universitário da FEI), F. P. Malta (Universidade de São Paulo) Steady heat transfer solution in a finned-tube radiator configuration, I. F. Pinheiro, L. 14:50 1726 ENTS144 A. Sphaier, L. S. de B. Alves (Universidade Federal Fluminense) Comparison of a hybrid CSP-biomass power plant performance into two different 15:10 1849 ENTS145 climate conditions, P. H. D. de V. Sousa, M. Siqueira (Universidade de Brasília) On the physical exergy disaggregation levels for the isolation of dissipative components in the thermoeconomic productive diagrams, J. J. C. S. Santos, D. 15:30 1938 ENTS146 Colombo, A. Lourenço, M. A. Barone (Universidade Federal do Espírito Santo), S. A. N. de Perez (Universidade Federal do ABC), J. L. M. Donatelli (Universidade Federal do Espírito Santo)

39 ORAL SESSION FRI / 8

ENTS3 - Energy and Thermal Sciences (Room 4 - Bldg. 4 / Laranja) TIME CODE Thermodynamics and Thermal Systems Simplified thermal analysis and optimization of a beta type Stirling cycle, G. H. 8:30 1968 ENTS147 Correa, M. F. de S. Moreira, L. Faria , C. Figueiredo, F. Fonseca, C. Teixeira, D. H. do N. Viola (Centro Universitário Newton Paiva) Thermosyphon applied as thermal reservoir to chemisorption chillers, M. V. Oro, R. 8:50 1980 ENTS148 G. Oliveira, E. Bazzo (Universidade Federal de Santa Catarina) Desiccant-assisted system for compression, F. Quintanilha, L. A. Sphaier 9:10 2460 ENTS149 (Universidade Federal Fluminense) Thermal performance of a heat pump with solar evaporator under zero solar radiation conditions, H. Augusto (Universidade Federal de Minas Gerais), F. N. Q. 9:30 2566 ENTS150 dos Santos (Centro Federal de Educação Tecnológica de Minas Gerais), J. J. G. Pabon, R. Koury, L. Machado (Universidade Federal de Minas Gerais) Design of a counter-current coaxial condenser for a refrigerating machine operating with CO2 in a subcritical cycle, H. Augusto, C. H. N. da Silva, S. M. S. Pinheiro 9:50 2582 ENTS151 (Universidade Federal de Minas Gerais), G. Gama, E. V. Silva (Pontifícia Universidade Católica de Minas Gerais) 10:10 Coffee-break TIME CODE Thermodynamics and Thermal Systems Energy and exergy analysis of an aromatics plant. Implementation of two thermal 10:40 2669 ENTS152 energy recovery units, C. Pinho, A. N. Vilarinho, J. M. de Campos (Universidade do Porto, Portugal) Numerical simulation of air-solid thermal storage for CSP systems, C. Adasme, T. 11:00 5912 ENTS153 Oliveira, A. B. Junior, M. Siqueira (Universidade de Brasília) Parametric analysis of the primary circuit of the Angra 1 nuclear power plant PWR 11:20 2871 NUCE2 type and its applications in the naval nuclear propulsion, L. Chaves, M. Curi, L. Ferreira (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) 11:40 ------12:00 Lunch

40 ORAL SESSION WED / 6

FIVB - Flow Induced Vibration (Room 2 - Bldg. 4 / Laranja) TIME CODE Flow Induced Vibration Aeroelastic modeling of low speed pitching oscillations induced by stall considering 8:30 0045 FIVB1 nonlinear springs, C. R. dos Santos, F. D. Marques (Universidade de São Paulo) Numerical investigation of the Den Hartog’s criterion of stability, for a static circular 8:50 0097 FIVB2 cylinder fitted to a fixed splitter plate, for a Reynolds number equal to 60 and 200, R. Basso, G. R. da S. Assi, R. Orselli, F. Saltara (Universidade de São Paulo) CFD study on the influence of free surface and turbulence modeling on the flow around a fixed circular cylinder with low aspect ratio, P. Lopes (Universidade de São 9:10 1003 FIVB3 Paulo), G. Rosetti (Argonáutica Engenharia e Pesquisas), C. P. Pesce (Universidade de São Paulo), R. Gonçalves (University of Tokyo) Design of a modular suspension rig for aeroelastic studies in a wind tunnel, G. B. 9:30 0132 FIVB4 Martins, G. R. da S. Assi (Universidade de São Paulo) Cantilevered pipe ejecting fluid under VIV: non-linear reduced order modeling and 9:50 1112 FIVB5 analysis, R. M. M. Orsino, C. P. Pesce, G. Franzini (Universidade de São Paulo) 10:10 Coffee-break TIME CODE Flow Induced Vibration Fluid structure interaction applied to the Couette-Circular problem, A. A. 10:40 0388 FIVB6 Nascimento, F. P. Mariano (Universidade Federal de Goiás), E. L. M. Padilla, A. Silveira Neto (Universidade Federal de Uberlândia) Experimental flow-induced motions of array of floating cylinders with circular, square and diamond sections, R. Gonçalves (University of Tokyo), M. E. Chame, P. Lopes 11:00 0441 FIVB7 (Universidade de São Paulo), N. H. Hannes (Universidade Federal de Santa Catarina), S. Hirabayashi, H. Suzuki (University of Tokyo) Analysis of the switching flow after two cylinders side-by-side submitted to a high 11:20 0544 FIVB8 turbulence impinging flow, A. Ost, S. V. Möller (Universidade Federal do Rio Grande do Sul) Investigation of the high energy mode branch in flexible cylinders VIV: a novel 11:40 0946 FIVB9 recursive experimental analysis methodology, W. A. Defensor Filho, C. P. Pesce, G. Franzini (Universidade de São Paulo) 12:00 Lunch TIME CODE Flow Induced Vibration Piezoelectricity induced by turbulent airflow for clean and renewable electric power 13:30 0952 FIVB10 generation, R. Pires, M. M. Vieira, A. Soares (Universidade Federal de Mato Grosso) Experimental analysis of turbulent transversal flow on two fixed parallel cylinders 13:50 0956 FIVB11 with oscillatory and rotational freedom, D. Varela, R. F. Neumeister, G. Dias, A. V. de Paula, S. V. Möller (Universidade Federal do Rio Grande do Sul) Velocity levels analysis in a cross flow over two side-by-side cylinders and a row of 14:10 0105 FIVB12 cylinders, R. F. Neumeister, S. V. Möller, A. P. Petry (Universidade Federal do Rio Grande do Sul) Spectrum sensitivity of the flow around spring-mounted cylinder, D. I. Dolci, B. 14:30 1063 FIVB13 Carmo (Universidade de São Paulo) Measurement of the forces on two cylinders side-by-side in bistable flow, G. Dias (Universidade Federal do Rio Grande do Sul), A. La Rosa (Universidade Católica de 14:50 0361 FIVB14 Pelotas), D. Varela, A. Balbinot, S. V. Möller (Universidade Federal do Rio Grande do Sul) Free surface modelling using 2 way fluid structure interaction approach for drag in a 15:10 1199 FIVB15 cylinder calculation, F. M. de Almeida, G. R. da Silva Assi (Universidade de São Paulo) 15:30 ------

41 ORAL SESSION THU / 7

FIVB - Flow Induced Vibration (Room 2 - Bldg. 4 / Laranja) TIME CODE Flow Induced Vibration Vortex-induced stay vane cracks in a Francis turbine: an application of experimental 8:30 1440 FIVB16 and numerical analysis, R. Sampaio (Voith Hydro Ltda.), A. D. Agostini Neto (Universidade de São Paulo), V. Borri, R. Castilho (China Three Gorges Brasil) Hydroelastic effects in structural response under wave impact, R. A. Amaro Jr., L.-Y. 8:50 2138 FIVB17 Cheng (Universidade de São Paulo) Uncertainties in applying the independence principle to the VIV responses of yawed 9:10 5909 FIVB18 cylinders, N. H. Hannes, A. Mikowski, A. Fujarra (Universidade Federal de Santa Catarina) 9:30 ------9:50 ------10:10 Coffee-break

42 ORAL SESSION MON / 4 FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Computational Fluid Dynamics Flow visualization and numerical investigation of gap vortex instability in a rectangular channel containing a single rod bundle, H. Severino, J. Goulart 8:30 1137 FLMR1 (Universidade de Brasília), A. V. de Paula (Universidade Federal do Rio Grande do Sul) Direct numerical simulations of pipe flow with wall transpiration, M. Rempto, H. 8:50 2178 FLMR2 Anbarlooei, A. P. S. Freire (Universidade Federal do Rio de Janeiro) Effects of impeller design on the characteristics of centrifugal pump, R. A. M. Carrillo, 9:10 2691 FLMR3 C. J. F. Júnior, D. Pereira, T. J. P. da Silva, C. E. C. Rodriguez (Universidade Federal de Itajubá) Numerical simulations of flow and mixing formation in direct injected spark ignition 9:30 0292 FLMR4 engines, M. D. Ribeiro, A. Bimbato, M. Zanardi, J. A. P. Balestieri (Universidade Estadual Paulista Julio de Mesquita Filho) First scalability study of a LES solver for supersonic jet flow configurations, C. A. 9:50 0349 FLMR5 Junqueira Jr., S. Yamouni (Instituto Tecnológico de Aeronáutica), J. L. F. Azevedo (Instituto de Aeronáutica e Espaço), W. Wolf (Universidade Estadual de Campinas) 10:10 Coffee-break TIME CODE Computational Fluid Dynamics Free surface modelling using 2 way fluid structure interaction approach for drag in a 10:40 0466 FLMR6 cylinder calculation, F. M. de Almeida, G. R. da Silva A. (Universidade de São Paulo) Numerical simulation of the neutral atmospheric surface layer flow over real terrain: 11:00 0478 FLMR7 the Askervein hill case, W. C. Radunz, A. P. Petry (Universidade Federal do Rio Grande do Sul) Numerical simulation of wind flow over a highly complex topography: the Bolund hill 11:20 0480 FLMR8 case, W. C. Radunz, A. P. Petry (Universidade Federal do Rio Grande do Sul) Computational analysis of the flow around a canard type aircraft, O. de Almeida, A. 11:40 0488 FLMR9 O. D. dos Santos (Universidade Federal de Uberlândia) 12:00 Lunch TIME CODE Computational Fluid Dynamics Numerical investigation of hemodynamics patterns after transcatheter aortic valve 13:30 0512 FLMR10 replacement (TAVR), D. Celis, A.Nieckele, I. F. I. Aguilar, P. N. Azevedo, B. Azevedo (Pontifícia Universidade Católica do Rio de Janeiro) Evaluation of the statistical convergence of turbulent flow data, J. R. Andrade (Universidade Federal de Uberlândia), R. Martins (Universidade Federal do Espírito 13:50 0527 FLMR11 Santo), R. Thompson (Universidade Federal Fluminense), A. S. Neto (Universidade Federal de Uberlândia), G. Mompean (University of Lille) Simulation of a 2-D pulsatile flow in a bifurcated geometry using open source 14:10 0579 FLMR12 software, G.P. V. de Almeida (Instituto Tecnológico de Aeronáutica), J. L. F. Azevedo (Instituto de Aeronáutica e Espaço) CFD analysis of a low speed subsonic wind tunnel, O. de Almeida, O. Neto 14:30 0644 FLMR13 (Universidade Federal de Uberlândia) Soybean storage bin aeration system optimization, V. Faoro, O. Khatchatourian, M. 14:50 0726 FLMR14 O. Binelo, N. Toniazzo (Universidade Regional do Noroeste do Estado do Rio Grande do Sul) Instability analysis for mixing layers using time stepping method, R. B. Freitas, L. S. 15:10 0755 FLMR15 de B. Alves (Universidade Federal Fluminense) Adaptation of a nonlinear lifting line based method into a vortex lattice code for stall 15:30 0801 FLMR16 and post stall calculation, A. Araújo, R. L. U. F. Pinto (Universidade Federal de Minas Gerais), D. C. R. Azevedo (Universidade Federal do Piauí)

43 ORAL SESSION TUE / 5 FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Computational Fluid Dynamics Lattice Boltzmann simulation of a droplet interaction with a solid surface, G. dos S. 8:30 0818 FLMR17 Ribeiro, M. Guzella, L. C. Gómez (Universidade de São Paulo) Using foam-extend to assess the influence of fluid-solid interaction on the flow in intracranial aneurysms, I. L. de Oliveira, J. L. Gasche (Universidade Estadual 8:50 0851 FLMR18 Paulista), J. Militzer (Dalhousie University), C. Baccin (Hospital Israelita Albert Einstein) Numerical investigation of viscoelastic liquid curtain breakup, M. Bazzi, M. Carvalho 9:10 0916 FLMR19 (Pontifícia Universidade Católica do Rio de Janeiro) Grid convergence analysis using finite volume method for nonlinear case of fluid flow 9:30 0938 FLMR20 between two parallel flat plates, W. Schinestzki, L. B. da Luz , J. C. Zart, G. Demarco (Universidade Federal de Santa Maria) Assessment of the wake patterns and unsteady loads for a NACA0012 airfoil under 9:50 1002 FLMR21 heaving and pitching motion, L. Frederico, W. Wolf (Universidade Estadual de Campinas) 10:10 Coffee-break TIME CODE Computational Fluid Dynamics Trailing edge formation during slot coating of rectangular patches, D. Maza, M. 10:40 1066 FLMR22 Carvalho (Pontifícia Universidade Católica do Rio de Janeiro) Aeroacoustic prediction of the lagoon landing gear, T. R. Ricciardi, W. Wolf 11:00 0165 FLMR23 (Universidade Estadual de Campinas) Experimental evaluation of the influence of surface roughness on a model obtained by different casting processes in the development of flow profiles, F. de A. da S. Jr, F. 11:20 1178 FLMR24 Brand, L. Trevisan, D. L. Villanova, B. Nonemacher (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Sul) Elements method’s validation in order to determinate soybeans’ final velocity, R. 11:40 1215 FLMR25 Lima, M. O. Binelo, O. Khatchatourian, S. V. Winik, R. K. Lorenzoni (Universidade Regional do Noroeste do Estado do Rio Grande do Sul) 12:00 Lunch TIME CODE Computational Fluid Dynamics Numerical study of flow inside supersonic separators, Matheus Augusto C. Pires, B. 13:30 1220 FLMR27 de A. Avancini, R. Orselli, B. Carmo (Universidade de São Paulo) Machine learning techniques for accuracy improvement of rans simulations, M. Cruz (Universidade Federal do Rio de Janeiro), R. Thompson (Universidade Federal 13:50 1241 FLMR28 Fluminense), R. D. A. Bacchi (Universidade Federal do Rio de Janeiro), L. Sampaio (Universidade Federal Fluminense) Dynamics of blood flow in coronary artery, G. R. dos Anjos (Universidade Estadual 14:10 1291 FLMR29 do Rio de Janeiro), S. McGinty (University of Glasgow), R. M. de Lucena, J. da R. M. Pontes, N. Mangiavacchi (Universidade Estadual do Rio de Janeiro) Görtler instability study on the pressure surface of a turbine blade, L. Marques 14:30 1313 FLMR30 (Universidade de São Paulo), J. K. Rogenski (Universidade Tecnológica Federal do Paraná), L. F. de Souza (Universidade de São Paulo) OWC simulation comparison between turbulent and laminar models using 14:50 1379 FLMR31 OpenFOAM code, A. Santos, D. V. E. Barbosa, J. A. Souza, E. dos Santos (Universidade Federal do Rio Grande - FURG) Assessment of two-equation and les turbulence models in the transition to 15:10 1399 FLMR32 turbulence of channel flows, J. M. Vedovoto, R. Rocha (Universidade Federal de Uberlândia) Parametric analysis of a swing check valve using computational fluid dynamics 15:30 1441 FLMR27 (CFD), N. E. de A. Pontes, M. Junior (Instituto Federal de Pernambuco)

44 ORAL SESSION WED / 6 FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Computational Fluid Dynamics Marangoni instability of a thin liquid film flow with viscous dissipation, E. Villela, L. S. 8:30 1474 FLMR33 de B. Alves (Universidade Federal Fluminense) Solar updraft tower performance evaluation, A. Ghazarian (Instituto Ingeniería 8:50 1480 FLMR34 Mecánica y Producción Industrial), P. Curto-Risso, P. Galione (Universidad de la República) Response amplitude operators of a Wigley ship model via computational fluid 9:10 1574 FLMR35 dynamics, R. M. Moreira, R. Santos, S. Daruis, G. Rojo (Universidade Federal Fluminense), R. D. A. Bacchi (Universidade Federal do Rio de Janeiro) The backscatter on large eddy solutions and on solution obtained with non-linear 9:30 1602 FLMR36 disturbance equation, R.G. da SIlva (Instituto de Aeronáutica e Espaço), M. Pimenta (Universidade de São Paulo) Computational simulation of flow in a supersonic gas separator, B.de A. Avancini, M. 9:50 1608 FLMR37 A. C. Pires, B. Carmo, R. Orselli (Universidade de São Paulo) 10:10 Coffee-break TIME CODE Computational Fluid Dynamics Growth of even and odd instability modes in compressible binary jet flows, J. K. Rogenski (Universidade Tecnológica Federal do Paraná), L. F. de Souza 10:40 1698 FLMR38 (Universidade de São Paulo), M. T. de Mendonça (Instituto de Aeronáutica e Espaço), P. Morris (Pennsylvania State University) Hydrodynamic analysis of debris containment grids in hydropower plant using 11:00 1707 FLMR39 porous media, E. T. Katsuno (Universidade de São Paulo), F. S. de Castro, J. L. D. Dantas (Instituto de Pesquisa Tecnológica do Estado de São Paulo) Aerodynamic performance analysis of three-bladed horizontal axis wind turbine 11:20 1712 FLMR40 through computational modeling and simulation, O. Neto, B. Carmo (Universidade de São Paulo) Numerical and experimental study of free surface flows in a rock-flow cell, A. V. L. Machado (Universidade Tecnológica Federal do Paraná), F. Schneider (Centro 11:40 1718 FLMR41 Universitário Autônomo do Brasil), P. H. D. Dos Santos, R. Morales (Universidade Tecnológica Federal do Paraná), X. Zhang (Colorado School of Mines), A. Sum (Universidade Tecnológica Federal do Paraná) 12:00 Lunch TIME CODE Computational Fluid Dynamics Numerical simulation of mixed convection in porous media induced by viscous 13:30 1722 FLMR42 dissipation, P. V. Brandão, R. D. dos Santos, L. S. de B. Alves (Universidade Federal Fluminense) Wind farm layout optimization based on CFD simulations, L. E. B. Cruz, B. Carmo 13:50 1723 FLMR43 (Universidade de São Paulo) Large-eddy simulation of the flow though a propeller hydrokinetic turbine, P. H. D. 14:10 1844 FLMR44 de V. Sousa, M. Siqueira (Universidade de Brasília) Data transition from 3D to 1D simulation for underhood analysis of cooling system, 14:30 2120 FLMR45 R. Silva, R. G. dos Santos (Universidade Estadual de Campinas) Study of laminar-turbulent transition on a flow under a flat plate using a CFD tool, F. 14:50 2140 FLMR46 A. F. Câmara, A. Barros, S. Souza (Universidade Federal do Rio Grande do Norte) Large scale effects in the turbulent kinetic energy budget of channel flows, L. A. C. A. 15:10 0202 FLMR47 Schiavo, W. Wolf (Universidade Estadual de Campinas), J. L. F. Azevedo (Instituto de Aeronáutica e Espaço) 15:30 ------

45 ORAL SESSION THU / 7 FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Computational Fluid Dynamics Numerical analysis of the influence of output angles of rotor blades on characteristics 8:30 2235 FLMR49 curves of a radial pump, L. de L. Freire, L. M. C. Ferro (Universidade Federal Rural do Semi-árido) Numerical prediction of pressure fluctuations at the runner output of a generator of 8:50 2273 FLMR50 a hydroeletric power plant of Tucuruí-Pa, G. Junior, A. Lima, L. Bastos, A. Mesquita (Universidade Federal do Pará) Transport through polymer layer and porous arterial wall with binding in drug- 9:10 2346 FLMR51 eluting stents using the fem, R. M. de Lucena, N. Mangiavacchi, J. da R. M. Pontes, G. R. dos Anjos, S. McGinty (University of Glasgow) Lattice-Boltzmann assessment of the tortuosity of a 2D Sierpinski carpet type of 9:30 2393 FLMR52 porous medium, R. Bazarin, C. Naaktgeboren, S. Junqueira (Universidade Tecnológica Federal do Paraná) Mathematical modeling and simulation of the rheological behavior of an elastic 9:50 2531 FLMR53 liquid undergoing different shear flows, Á. M. Neto, I. D. O. Pereira, Y. D. Sobral, F. R. Cunha (Universidade de Brasília) 10:10 Coffee-break TIME CODE Computational Fluid Dynamics Compressible flow over a circular cylinder using a virtual boundary method, J. S. 10:40 2619 FLMR54 Pineda, P. Greco (Universidade de São Paulo) Numerical investigation of the flow behavior in injection moulding process for 11:00 2637 FLMR55 nematic LCPS, P. A. Cruz (Universidade Federal do Tocantins), M. Tomé (Universidade de São Paulo) Evaluation of the influence of wind speed and angle of attack on the aerodynamic 11:20 2805 FLMR56 effect of wind turbine blades, R. Silva, S. Alves, L. G. V. M. de Souza, E. A. de Faria, M. T. dos S. Silva (Universidade Federal do Rio Grande do Norte) Dynamic analysis of the fluid flow over a wind turbine blade, R. Rocha, A. A. C.i 11:40 2908 FLMR57 Júniorr, J. M. Vedovoto (Universidade Federal de Uberlândia) Numerical simulation of the flow of suspended soft-capsules through constricted 12:00 2916 FLMR58 channels, J. Roca, I. Menezes, M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro) 12:00 Lunch TIME CODE Industrial Applications and Turbomachinery, Theoretical and Analytical Modeling Experimental analysis of the precharging effect on the dynamic behavior of a reed 13:30 1713 FLMR59 valve used in refrigeration compressors, G. Moimás, A. L. S. Abrego, J. L. Gasche (Universidade Estadual Paulista Julio de Mesquita Filho) Technical and economic viability of the hydropower plant implementation on the urban water supply network: case study - WTP Pacas João Monlevade, R. O. Neto 13:50 2629 FLMR60 (Universidade Federal de Itajubá), M. J. V. Caldeira (Universidade do Estado de Minas Gerais), C. J. R. Coronado (Universidade Federal de Itajubá), G. Silva, G. Magalhães, L. Silva, J. Mata (Universidade do Estado de Minas Gerais) Numerical computation of airfoil-gust compressible lift response, R. F. Miotto, W. 14:10 0253 FLMR61 Wolf (Universidade Estadual de Campinas) Numerical investigation of viscous flow in ESP’s impeller and diffuser, M. R. M. 14:30 6487 FLMR62 Penteado, M. S. de Castro, A. Bannwart (Universidade Estadual de Campinas) A similarity law for transpired turbulent flows, M. C. Guimaraes (Universidade 14:50 0804 FLMR63 Federal do Rio de Janeiro), D. A. Cruz (Universidade Estadual do Rio de Janeiro), A. P. S. Freire (Universidade Federal do Rio de Janeiro) Shear-induced hydrodynamic diffusion and aggregation on non-Brownian dilute 15:10 1594 FLMR64 magnetic suspensions, G. R. Neto (Universidade de Brasília) 15:30 ------

46 ORAL SESSION FRI / 8 FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Instrumentation and Experiments Development of ionization sensors for shockwave speed measurements, R. A. Cintra 8:30 0453 FLMR65 (Universidade Federal de Itajubá), T. Rolim (Instituto de Estudos Avançados), L. Al. G. Ribeiro (Instituto Tecnológico de Aeronáutica) Structural analysis for a reduced scale model of a hydropower plant debris containment grid, F. S. de Castro (Instituto de Pesquisas Tecnológicas do Estados 8:50 0578 FLMR66 de São Paulo), E. T. Katsuno (Universidade de São Paulo), J. M. P. de Souza, A. M. Kogishi, J. L. D. Dantas (Instituto de Pesquisa Tecnológica do Estado de São Paulo) Hydrodynamic and acoustic characteristics of the Labhidro’s small cavitation tunnel, 9:10 0823 FLMR67 W. Barnack, A. Moura, R. Sbragio, H. C. da Silva Jr. (Marinha do Brasil), L. Pansanato (Universidade Estadual Paulista Julio de Mesquita Filho) Development of a prototype equipment for cavitation testing, W. A. Morais (Universidade Santa Cecília), R. Pereira (Universidade Santa Cecília), B. Siqueira 9:30 1004 FLMR68 (Universidade Santa Cecília), C. A. Moino (Universidade Santa Cecília), D. de Moraes Jr. (Universidade Santa Cecília) Experimental study of gas-liquid flow separation at an inclined T-junction with a 9:50 1644 FLMR69 vertical branch, Y. Gavioli, J. Loureiro, V. Aibe, A. P. S. Freire, L. P. S. de Oliveira (Universidade Federal do Rio de Janeiro) 10:10 Coffee-break TIME CODE Instrumentation and Experiments Perturbation of a turbulent channel flow by a two-dimensional triangular ripple, F. 10:40 1770 FLMR69 Cúñez, E. de M. Franklin (Universidade Estadual de Campinas) Analysis of wind shear and turbulence intensity influence on wind power performance using SCADA and LIDAR data, L. J. L. Stival (Universidade Federal do 11:00 1967 FLMR70 Paraná), F. O. de Andrade (Universidade Tecnológica Federal do Paraná), A. K. Guetter (Universidade Federal do Paraná) Experiments on turbulent boundary layer separation using particle image 11:20 2604 FLMR71 velocimetry, L. J. C. Gonzalez, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de Janeiro) Turbulent structures in a flow visualization inside a conical diffuser, J. L. C. R. Vila, L. 11:40 2150 FLMR72 Dias, P. H. Mattos, P. Almeida (Centro Universitário UDF), T. Melo (Universidade de Brasília) 12:00 Lunch

47 ORAL SESSION MON / 4 FLMR - Fluid Mechanics and Rheology (AUD. 2 - Blaise Pascal - Library) TIME CODE Multi-phase Flow Experimental investigation of forces acting on oil drops within ESP impellers, R. 8:30 0130 FLMR73 Perissinotto, W. M. Verde, M. S. de Castro, A. Bannwart, J. L. Biazussi (Universidade Estadual de Campinas) Effect of the flow macro-scale on the effective stresses in gas-solid riser flows, J. 8:50 0179 FLMR74 Mouallem, S. R. A. Niaki (Escola de Engenharia de São Carlos), N. C. Cussy, G. J. S. Netzlaff, C. Milioli, F. Milioli (Universidade de São Paulo) Effect of the flow macro-scale on the effective drag coefficient in gas-solid riser 9:10 0182 FLMR75 flows, S. R. A. Niaki, J. Mouallem (Escola de Engenharia de São Carlos), N. C. Cussy, G. J. S. Netzlaff, C. Milioli, F. Milioli (Universidade de São Paulo) Numerical simulation of the two-phase water-faucet flow using a single pressure four equation model associated with the flux-corrected transport method, R. V. N. 9:30 0210 FLMR76 de Freitas, C. Sondermann, R. A. C. Patricio, A. B. Figueiredo, G. C. R. Bodstein (Universidade Federal do Rio de Janeiro), F. B. de F. Rachid (Universidade Federal Fluminense) Numerical investigation of a new pipe wall design to reduce elbow erosion, C. 9:50 0294 FLMR77 Duarte, F. Souza (Universidade Federal de Uberlândia) 10:10 Coffee-break TIME CODE Multi-phase Flow Prove the cycloidal slotted anode efficiency by modeling the bubble flow, R. Moura 10:40 0303 FLMR78 (Universidade Federal do Pará) Transient numerical simulation of two-phase flow using a compact scheme, B. 11:00 0336 FLMR79 Rodrigues, E. S. Rosa (Universidade Estadual de Campinas) Two-phase flow stability analysis using a level set approach, B. M. Soares 11:20 0431 FLMR80 (Universidade Federal Fluminense), M. R. Jotkar (Universidade Federal do Rio de Janeiro), D. Rodriguez (Universidade Federal Fluminense) Experimental analysis of water/oil emulsion effective viscosity in pipeline, N. A. V. 11:40 0473 FLMR81 Bulgarelli, J. L. Biazussi, M. S. de Castro, C. E. Perles, W. M. Verde, A. Bannwart (Universidade Estadual de Campinas) Characterization of slug flow in annular duct, using high speed video camera, 12:00 0541 FLMR82 annular wire-mesh sensor and PIV, M. M. H. Cely, V. E. C. Baptistella, O. M. H. Rodriguez (Universidade de São Paulo) 12:20 Lunch TIME CODE Multi-phase Flow An ALE-FEM method for axisymmetric two-phase flows, G. R. dos Anjos 13:30 1022 FLMR83 (Universidade Estadual do Rio de Janeiro), E. Gros (EPFL) Prediction of pressure gradient in stratified liquid-liquid pipe flow with entrainment 13:50 1051 FLMR84 effects, G. Bochio, O. M. H. Rodriguez (Universidade de São Paulo) Experimental validation by ultrasonic technique of the numerical analysis of an ascendant flow under the influence of the centrifugal and gravitational fields, H. K. 14:10 1073 FLMR85 Eidt, C. C. Rodrigues, R. Dunaiski, C. Y. Ofuchi, P. H. D. dos Santos, F. Neves Jr, R. Morales (Universidade Tecnológica Federal do Paraná) Studies of hydrate accumulation under multiphase flow conditions, E. Straume, R. 14:30 1187 FLMR86 Morales (Universidade Tecnológica Federal do Paraná), X. Zhang (Colorado School of Mines), G. Grasso, A. Sum (Universidade Tecnológica Federal do Paraná) Experimental analysis of two-phase flow in a radial centrifugal pump, J. Cubas, H. 14:50 1213 FLMR87 Stel, E. Ofuchi, D. Bertoldi, M. M. Neto, R. Morales (Universidade Tecnológica Federal do Paraná) Influence of operational conditions on the trajectory of an air bubble inside a 15:10 1217 FLMR88 centrifugal pump, E. Ofuchi, F. C. A. Jimenez, R. H. G. Sabino, H. Stel, D. Bertoldi, M. M. Neto, R. Morales (Universidade Tecnológica Federal do Paraná) Analysis of slug flow in horizontal pipes, C. Cozin, B. P. Naidek, M. G. Conte, F. A. 15:30 1226 FLMR89 Barbuto, R. Morales (Universidade Tecnológica Federal do Paraná)

48 ORAL SESSION TUE / 5 FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Multi-phase Flow Formation and properties of emulsions in heavy oil production, T. Botti, M. Moura, 8:30 1372 FLMR90 M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro) Influence of hydrate-like solid particles in horizontal gas-liquid slug flows, R. F. Alves, L. M. M. Rosas, C. L. Bassani (Universidade Tecnológica Federal do Paraná), F. 8:50 1454 FLMR91 Schneider (Centro Universitário Autônomo do Brasil), M. J. da Silva, M. Marcelino Neto, R. Morales, A. Sum (Universidade Tecnológica Federal do Paraná) Experimental characterization of horizontal pipe slug flow of air/shear-thinning fluid, 9:10 1717 FLMR92 R. Baungartner, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de Janeiro) Analysis of influence of channel diameter on boiling of isobutane (R-600A), L. 9:30 1778 FLMR93 Silveira, J. Copetti (Universidade do Vale do Rio dos Sinos), J. D. de Oliveira (Universidade Federal de Santa Catarina) New correlations of flow boiling heat transfer coefficients based on R1234YF data, F. N. Q. dos Santos (Centro Federal de Educação Tecnológica de Minas Gerais), M. 9:50 1793 FLMR94 Barroso, J. J. G. Pabon, H. Augusto (Universidade Federal de Minas Gerais), P. E. L. Barbieri (Centro Federal de Educação Tecnológica de Minas Gerais) 10:10 Coffee-break TIME CODE Multi-phase Flow Computational assessment of a gas-liquid pipe system on the fluid-dynamics of a 10:40 1884 FLMR95 high-temperature sulfidation corrosion mechanism, D. D. Ribeiro, F. C. Oliveira, J. Neto, E. Oliveira (Petróleo Brasileiro S.A.) Formation and morphology of subaqueous Barchan dunes, C. A. Alvarez, E. de M. 11:00 1893 FLMR96 Franklin (Universidade Estadual de Campinas) Experimental study of penetration depth produced by a plunging jet system, P. J. M. 11:20 2042 FLMR97 Lugo, D. R. Sansão, L. E. Ortiz-Vidal, O. M. H. Rodriguez (Universidade de São Paulo) Numerical simulation of two-phase slug flow from horizontal to downward inclined pipe using a hybrid code based on slug tracking and two-fluid methodologies, V. 11:40 2133 FLMR98 Almeida, M. G. Conte, C. Cozin, F. A. Barbuto, R. Morales (Universidade Tecnológica Federal do Paraná) Evaluation of models for horizontal gas-non-newtonian slug flow, G. Gonçalves, R. 12:00 2219 FLMR99 Baungartner, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de Janeiro) 12:20 Lunch TIME CODE Multi-phase Flow Investigation of bubble breakup in sudden expansions and contractions, C. M. P. 13:30 2241 FLMR100 Rosero, G. E. O. Celis, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de Janeiro) Study of the velocity of elongated bubbles in two-phase slug flow in a horizontal 13:50 2284 FLMR101 pipeline, F. E. C. Vicencio (Centro Universitário UniBrasil), W. Dobrychtop, C. A. C. de Andrade, F. Schneider (Centro Universitário Autônomo do Brasil) Velocity field and hold up measurements for inclined gas jets in vertical liquid 14:10 2292 FLMR102 crossflows, J. B. R. Loureiro, L. Guerra, A. Suaréz, A. P. Silva Freire (Universidade Federal do Rio de Janeiro) Comparison of two-phase flow correlations for hypothetical production well, M. V. C. 14:30 2448 FLMR103 Alves, E. Alves (Universidade do Estado de Santa Catarina) Innovative pseudo-transient well reservoir coupling, M. V. C. Alves, R. Alves, E. Alves 14:50 2449 FLMR104 (Universidade do Estado de Santa Catarina) Study of local phase fraction in stratified dense-gas-liquid pipe flow using gamma- 15:10 2569 FLMR105 ray densitometry, D. G. Chagas, T. Bicudo, L. E. Ortiz-Vidal, M. M. H. Cely, O. M. H. Rodriguez (Universidade de São Paulo) Measurement of pressure loss in gas-liquid two-phase flow in a horizontal pipeline, 15:30 2843 FLMR106 C. A. C. de Andrade, F. E. C. Vicencio, F. Schneider (Centro Universitário Autônomo do Brasil)

49 ORAL SESSION WED / 6 FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Rheology and Non-Newtonian Fluid Mechanics DNS of non-newtonian Giesekus fluid flow stability, A. C. Brandi, L. J. da S. Furlan (Universidade Estadual Paulista Julio de Mesquita Filho), M. T. de Mendonça 8:30 0476 FLMR107 (Instituto de Aeronáutica e Espaço), A. Silva, M. T. de Araujo, L. F. de Souza (Universidade de São Paulo) Are the cooling rate, the crystals morphology and the yield stress directly related in 8:50 0505 FLMR108 waxy oils? D. Andrade, M. Marcelino Neto, C. O. R. Negrao (Universidade Tecnológica Federal do Paraná) An experimental study on determining the highest thermodynamic solid-liquid 9:10 0507 FLMR109 equilibrium temperature for waxy oils, D. Andrade, M. Marcelino Neto, C. O. R. Negrão (Universidade Tecnológica Federal do Paraná) Flow of elasto-viscoplastic thixotropic materials with free-surface, F. S. Alves 9:30 0662 FLMR110 (Universidade Federal do Rio de Janeiro), R. Thompson (Universidade Federal Fluminense) Rheological study of gas hydrates formed from carbon dioxide molecules, G. A. B. Sandoval (Universidade Federal do Rio de Janeiro), E. Soares (Universidade Federal 9:50 0670 FLMR111 do Espírito Santo), R. Thompson (Universidade Federal Fluminense), F. B. Campos (PETROBRAS Petróleo Brasileiro S.A.), A. Teixeira (Universidade Federal do Rio de Janeiro) 10:10 Coffee-break TIME CODE Rheology and Non-Newtonian Fluid Mechanics Nonlinear eddy viscosity models for viscoelastic turbulence, A. Nieckele (Pontifícia 10:40 1033 FLMR112 Universidade Católica do Rio de Janeiro), R. Thompson (Universidade Federal Fluminense), G. Mompean (University Lille) On the link between Kolmogorov microscales and friction factor in non-newtonian 11:00 1203 FLMR113 yielding fluids, H. Anbarlooei, A. P. S. Freire, C. M. M. Santos (Universidade Federal do Rio de Janeiro) CFD analysis of grease flow behavior from labyrinth seals, L. Frose, T. Cousseau 11:20 1242 FLMR114 (Universidade Tecnológica Federal do Paraná) Natural convection of viscoplastic fluids in a square enclosure, D. D. O. dos Santos, L. 11:40 1409 FLMR115 P. B. Miranda (Universidade Federal de Uberlândia) Application of the KBKZ-PSM integral model to axisymmetric flows, C. Viezel, J. 12:00 1490 FLMR116 Bertoco, M. Tomé (Universidade de São Paulo), M. Vynnycky (Royal Institute of Technology) 12:20 Lunch TIME CODE Rheology and Non-Newtonian Fluid Mechanics A numerical and experimental study of the pressure transmission in viscoplastic 13:30 1540 FLMR117 fluids confined in pipelines, R. S. Mitishita, G. M. de Oliveira, C. O. R. Negrao (Universidade Tecnológica Federal do Paraná) Evaluating the influence of polymers on the identification of vortices, R. Martins (Universidade Federal do Espírito Santo), J. R. Andrade (Universidade Federal de 13:50 1826 FLMR118 Uberlândia), R. Thompson (Universidade Federal Fluminense), G. Mompean (University of Lille, France) An experimental investigation of the temperature influence on the viscous modulus 14:10 1899 FLMR119 and gelation transition of a polymeric solution, I. D. O. Pereira (Universidade de Brasília), F. R. Cunha (Universidade de Brasília) Complex fluid flow through a constricted microchannel, J. A. F. Gutiérrez, M. Moura, 14:30 1954 FLMR120 M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro) Numerical analysis of power law fluid flow in a channel partially filled by a porous 14:50 2098 FLMR121 medium using the lattice Boltzmann method, R. Meira, F. C. de Lai, C. O. R. Negrao, S. Junqueira (Universidade Tecnológica Federal do Paraná) Numerical study of heat transfer in non-newtonian fluids, L. Nunes (Universidade 15:10 2213 FLMR122 Regional Integrada do Alto Uruguai e das Missões) Experimental analysis of critical velocity in flat plate fuel element for nuclear research 15:30 2742 NUCE1 reactor, A. J. A. de Castro, D. Andrade (Instituto de Pesquisas Energéticas e Nucleares)

50 ORAL SESSION THU / 7 FRFS - Fracture, Fatigue, and Structural Integrity (Room 5 – Bldg. 4) TIME CODE Fracture, Fatigue, and Structural Integrity Modes I and II fatigue induced delamination in co-cured composite structural joints, F. Gonzalez, F. Garpelli, N. N. Silveira, R. Sales (Instituto Tecnológico de 8:30 0249 FRFS1 Aeronáutica), M. Shiino (Universidade Estadual Paulista Julio de Mesquita Filho), M. Arbelo, M. Donadon (Instituto Tecnológico de Aeronáutica) The use of XFEM for stress intensity factor estimation of surface cracks, G. Coêlho, 8:50 0534 FRFS2 A. A. Silva, M. A. dos Santos (Universidade Federal de Campina Grande) Cyclic deformation and fatigue of 7050-T7451 aluminum alloy, K. V. Fabara, C. B. de 9:10 0600 FRFS3 Barros, F. Castro, J. Ferreira (Universidade de Brasília) Numerical/experimental analysis of the crack trajectory in mixed-mode loading, A. 9:30 0621 FRFS4 Pinto, J. Ferreira (Universidade de Brasília), Crack initiation test in bending fatigue: detecting by the loss of gas-tightness, J. F. Dias (Universidade de Itaúna), T. L. Camargos (Universidade Federal de Minas 9:50 0680 FRFS5 Gerais), E. A. S. Nogueira (Fundação Universidade de Itaúna), D. Carmo (SENAI), G. Ribeiro, A. M. Figueiredo (Universidade Federal de Minas Gerais) 10:10 Coffee-break TIME CODE Fracture, Fatigue, and Structural Integrity Analysis of mixed-mode stress intensity factors using digital image correlation 10:40 0684 FRFS6 displacement fields, J. G. D. Rodríguez, G. Gonzales, J. A. O. Gonzalez, J. Freire (Pontifícia Universidade Católica do Rio de Janeiro) Structural behavior of co-bonded composite structures subject to mode I and mode II fatigue induced delamination. F. Garpelli, F. Gonzalez, N. N. Silveira, M. Arbelo, 11:00 0723 FRFS7 M. Donadon, R. Sales (Instituto Tecnológico de Aeronáutica), M. Shiino (Universidade Estadual Paulista), H. Resende (Instituto de Pesquisas Tecnológicas do Estado de São Paulo) A BEM implementation for nonhomogeneous and anisotropic fracture mechanics. F. 11:20 0873 FRFS8 Simionato, C. Daros (Universidade Estadual de Campinas) Influence of roughness and surface finish to reduction of wear and friction, D. R. da 11:40 1356 FRFS9 S. Medeiros, E. A. de Faria, V. Mello, S. Alves (Universidade Federal do Rio Grande do Norte) 12:00 Lunch TIME CODE Fracture, Fatigue, and Structural Integrity Numerical analysis of residual stresses on autogenous welding of an ASTM A106 gr. 13:30 1359 FRFS10 B small diameter pipe from oil and gas industry, H. A. da S. Pereira, M. C. Rodrigues (Universidade Federal da Paraíba) Fatigue characterization of the C36000 copper alloy using the thermographic 13:50 1512 FRFS11 method, L. Rego, J. T. P. Castro, J. Freire, V. Paiva (Pontifícia Universidade Católica do Rio de Janeiro) Behavior of the distribution of life in notched components according to TCD (Theory 14:10 1567 FRFS12 of Critical Distance), J. Dias, J. Ferreira, L. Silva (Universidade de Brasília) A fast rotating bending fatigue test machine, R. de M. Nogueira, M. A. Meggiolaro, 14:30 1824 FRFS13 J. T. P. Castro (Pontifícia Universidade Católica do Rio de Janeiro) Study on the dissipation of kinetic energy in impact of free-fall objects on metallic 14:50 2065 FRFS14 plates and its associated plastic deformation, C. M. Clemente, H. Moura (Universidade de Brasília) Experimental validation of unloading compliance solutions applicable to C(t) and 15:10 2100 FRFS15 SE(b) specimens, G. H. B. Donato, R. Barros, J. F. de Carvalho Jr (Centro Universitário da FEI) Effects of crack tunneling on the elastic unloading compliance of SE(b) specimens - 15:30 2130 FRFS16 current limitations and proposals, L. G. F. Andrade, G. H. B. Donato (Centro Universitário da FEI)

51 ORAL SESSION FRI / 8 FRFS - Fracture, Fatigue, and Structural Integrity (Room 5 – Bldg. 4) TIME CODE Fracture, Fatigue, and Structural Integrity A strip-yield algorithm to predict fatigue crack closure and growth, S. E. Ferreira, J. 8:30 2239 FRFS17 T. P. Castro, M. A. Meggiolaro (Pontifícia Universidade Católica do Rio de Janeiro) Impedance-based structural health monitoring analysis for damage identification on 8:50 2299 FRFS18 a rotor, I. G. Faria, V. Sant'Ana, R. M.F. Neto, K. M. Tsuruta (Universidade Federal de Uberlândia) Fatigue limit determination of a low carbon steel using the thermographic technique, C. F. C. Bandeira, P. P. Kenedi (Centro Federal de Educação Tecnológica 9:10 2395 FRFS19 Celso Suckow da Fonseca), J. T. P. Castro (Pontifícia Universidade Católica do Rio de Janeiro) Se(b) specimens under 4-point bending - recommended roller span and solutions 9:30 2508 FRFS20 for Ki and elastic compliance, G. H. B. Donato, K. L. Carvalho, V. A. Lucas Göltl (Centro Universitário da FEI) Failure analysis on equipment maintenance of a crushing unit, H. Augusto (Universidade Federal de Minas Gerais), N. Oliveira (Pontifícia Universidade 9:50 2560 FRFS21 Católica de Minas Gerais), D. C. Dutra (Universidade Federal de Minas Gerais), J. de S. Ramos (Universidade Estadual do Rio de Janeiro), C. A. Fonseca (Pontifícia Universidade Católica de Minas Gerais) 10:10 Coffee-break

52 ORAL SESSION THU / 7 HVAC - Heating, Ventilation, Air-Conditioning and Refrigeration (AUD.2 - Blaise Pascal - Library) TIME CODE HVAC Current refrigerant landscape in the context of Kigali 2016 agreement and the 8:30 Invited potential role of natural refrigerants, Z. Ayub (Isotherm Inc., USA) Mathematical model of an automotive air-conditioning system under steady-state 9:10 0367 HVAC1 conditions, D. L. da Silva, G. M. de Cordova (Universidade Federal de Santa Catarina) Integration of urban microclimate in building energy simulation, A. Gros (Pontifícia 9:30 0940 HVAC2 Universidade Católica) Development of a new entrance chamber for continuous vortex tube operation at 9:50 1475 HVAC3 low pressures, H. Lopez, M. E. V. da Silva, P. A. C. Rocha (Universidade Federal do Ceará) 10:10 Coffee-break The influence of buildings envelope on its energetic efficiency, B. Ferrari, P. R. 10:40 1482 HVAC4 Wander, D. Medeiros (Universidade do Vale do Rio dos Sinos) Performance evaluation of pet panel for direct evaporative cooling, J. M. Pereira 11:00 1874 HVAC5 (Universidade Federal do Piauí), J. Pimenta, M. Siqueira (Universidade de Brasília) Thermal comfort conditions in a classroom conditioned by a split-type system, A. da 11:20 1898 HVAC6 S. Jr, R. Vilain, M. Pereira (Instituto Federal de Santa Catarina), N. Mendes (Pontifícia Universidade Católica do Paraná), K. Cordeiro (CESI - Ecole d´Ingineurs) Study of thermal conditioning of greenhouses with ground-coupled heat 11:40 2206 HVAC7 exchangers, L. Romeo, C. Díaz, P. Galione (Universidad de la República) 12:00 Lunch TIME CODE Refrigeration Effects of solar radiation in a direct expansion solar assisted CO2 heat pump, T. F. 13:30 0401 HVAC8 Paulino, R. N. de Oliveira, L. Machado, R. Koury (Universidade Federal de Minas Gerais) Distributed model to achieve the steady state through the false transient in a solar assisted heat pump, T. F. Paulino (Universidade Federal de Minas Gerais), R. N. de 13:50 0403 HVAC9 Oliveira (Centro Federal de Educação Tecnológica de Minas Gerais), L. Machado, R. Koury (Universidade Federal de Minas Gerais) Thermal and cost assessment of an absorption refrigeration system, F. R. P. Arrieta, 14:10 1031 HVAC10 L. A. Nogueira, V. P. M. de Oliveira, W. M. dos S. Vieira Jr (Pontifícia Universidade Católica) Performance of magnetic refrigerators operating with different magnetic profiles, F. 14:30 1067 HVAC11 P. Fortkamp, G. B. Lang, J. Lozano, J. Barbosa (Universidade Federal de Santa Catarina) Transient heat transfer analysis of a wine storage cabinet, R. S. Calomeno, N. M. de 14:50 1258 HVAC12 Sá, J. Lozano, J. Barbosa (Universidade Federal de Santa Catarina) A cascade R134A/R744 refrigeration cycle thermal analysis: evaluation of the 15:10 1307 HVAC13 intermediate heat-exchanger parameters, C. S. Bresolin (Universidade Federal do Rio Grande do Sul) Study of the thermodynamic performances of a refrigeration system with variable 15:30 2167 HVAC14 rotation compressor and electronic expansion valve, Y. A. B. Cutrim, L. F. M. Moura (Universidade Estadual de Campinas)

53 ORAL SESSION FRI / 8 HVAC - Heating, Ventilation, Air-Conditioning and Refrigeration (AUD.2 - Blaise Pascal - Library) TIME CODE Refrigeration Designing an active magnetic regenerator for a fixed magnetic circuit, G. F. Peixer, J. 8:30 1773 HVAC15 Lozano, J. Barbosa (Universidade Federal de Santa Catarina) Modeling of a variable speed compressor applied to a domestic refrigerator, Á. 8:50 1801 HVAC16 Gardenghi, L. C. Gómez (Universidade de São Paulo), J. F. Lacerda (Tecumseh do Brasil Ltda.) Numerical analysis of hot-wall condensers for domestic refrigerators, A. L. Seixlack, R. 9:10 1919 HVAC17 Lima (Universidade Estadual Paulista Julio de Mesquita Filho) Fault detection algorithm for temperature sensors of household refrigerators, E. 9:30 2127 HVAC18 Machado, A. S. Silveira, A. Trofino, C. Melo (Universidade Federal de Santa Catarina) CO2 concentration control system in teaching institutions, C. Silva, L. M. Carvalho, L. 9:50 2466 HVAC19 G. G. K. Gesteira (Instituto Federal da Bahia) 10:10 Coffee-break

54 ORAL SESSION MON / 4 MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Union and Assembly Processes Latest welding for high strength and toughness - friction stir welding of steels without 8:30 Invited transformation. H. Fujii (Osaka University, Japan) Comparing the dynamic response of bead-on-plate and butt welded plates, V. 9:10 0508 MMEN1 Macanhan (Laboratório Nacional de Astrofísica), E. Correa (Universidade Federal de Itajubá), J. T. da Silva (Laboratório Nacional de Astrofísica) Improving composites single-lap joint performance by carbon nanotubes, E. C. 9:30 0570 MMEN2 Monteiro, A. Avila (Universidade Federal de Minas Gerais) Study on the effects of welding parameters on force and temperature during Friction 9:50 0658 MMEN3 Stir Spot Welding of AA6060-T5, I. C. Góss, T. Rosendo, C. Aita, M. A. D. Tier, A. Wiedenhoft (Universidade Federal do Pampa) 10:10 Coffee-break TIME CODE Union and Assembly Processes Residual stresses in aluminum alloy AA7475-T761 using X-Ray diffraction technique, 10:40 0683 MMEN4 J. P. Perandini, S. Delijaicov (Centro Universitário da FEI), H. Resende, M. H. Batalha (Instituto de Pesquisa Tecnológica do Estado de São Paulo) Dimensioning of a protective gas mixer for electric arc welding, F. Moro, N. F. S. 11:00 0803 MMEN5 Neto (Universidade Estadual de Maringá) Application of the Monte Carlo method in time and cord geometry in welding, F. 11:20 0904 MMEN6 Moro, N. F. S. Neto, L. Nagima (Universidade Estadual de Maringá) The effect of welding current on mechanical behavior of resistance-spot welded 11:40 1259 MMEN7 TWIP steel joints, T. Colombo , G. dos Santos, A. Faria (Instituto Tecnológico de Aeronáutica), V. Braga, L. F. R. Junior (Centro Universitário Franciscano) Digital radiographic inspection and chracterization of defects in joined aluminium alloy AA5083 for shipbuilding by the friction stir welding (FSW), L. C. F. Filho, D. de S. 12:00 2304 MMEN8 Queiroga, R. Santos, T. Rolim, H. Fujiwara, A. Shinohara, A. Ono (Universidade Federal de Pernambuco), H. Fujii (Osaka University, Japan) 12:20 Lunch TIME CODE Union and Assembly Processes Analysis of welding distortion in naval steel with heat input variation, W. R. de F. 13:30 1468 MMEN9 Junior, R. Monteiro, A. Bracarense (Universidade Federal de Minas Gerais) 316L Stainless Steel diffusion bonding optimized parameters, L. Mateus, G. Nuernberg, G. Rosinski, P. Gonçalves, M. Mortean, R. H. G. e Silva (Universidade 13:50 2078 MMEN10 Federal de Santa Catarina), A. Monteiro (Universidade Federal do Rio de Janeiro), M. Mantelli (Universidade Federal de Santa Catarina) Analysis of torque in friction stir welding by inverse problem method, K. J. Quintana, 14:10 2570 MMEN11 J. L. Silveira (Universidade Federal do Rio de Janeiro) Analysis of the effect of spot welding current on the mechanical behavior and failure 14:30 2656 MMEN12 modes of automotive steel sheets, T. Colombo, F. do M. Sena, J. Faria, A. Faria (Instituto Tecnológico de Aeronáutica) Study of friction stir spot welding parameters for an aluminum alloy AA2024- T3, A. 14:50 2842 MMEN13 P. de O. Costa, A. da S. Alves, L. M. dos Santos, P. Brito, S. S. F. de Dafé (Pontifícia Universidade Católica de Minas Gerais) Virtual environment to part assembly using displacement coordinates, J. C. Linhares 15:10 5511 MMEN14 (Universidade Federal de Santa Catarina) 15:30 ------

55 ORAL SESSION TUE / 5 MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Metallurgical Processes Influence of austenitization at different temperatures on the mechanical properties 8:30 0096 MMEN15 and on the microstructure of hot stamped parts, T. Pinheiro, S. Button (Universidade Estadual de Campinas) Effects of preheating temperature and welding current on weld bead geometry in the 8:50 0334 MEMN16 submerged arc welding process, W. Bevilaqua, M. G. Antonello, C. Scheuer (Universidade Federal de Santa Maria) The method of finite differences applied to descripition of a mettalic component, B. 9:10 0925 MMEN17 de Castro, L. Trevisan, J. Donadel (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Sul) Characterization of the 410 NiMo coating using TIG process of welding, A. C. G. 9:30 0973 MMEN18 Pitoli, E. F. T. Olivio (Universidade Tecnológica Federal do Paraná) Incremental Sheet Forming of Aluminum with Heat for Complex Pieces, P. J. da 9:50 1103 MMEN19 Silva, A. Alvares (Universidade de Brasília) 10:10 Coffee-break TIME CODE Metallurgical Processes Mechanical properties in function of strain rate of AISI 304 austenitic stainless steels: 10:40 1381 MMEN20 a comparative study at room and cryogenic temperatures, M. Azevedo, M. T. Izumi, M. Crivoi, R. S. Namur, O. Cintho (Universidade Estadual de Ponta Grossa) Analysis of the mechanical behavior in the interface of the buttering weld of steel 11:00 1663 MMEN21 AISI 4130 with Inconel 625, J. Silva, R. de Santana, D. Beltrão, A. Marcos (Universidade Federal da Paraíba) Porous-media braking of electromagnetic stirring in the continuous casting of steel, 11:20 2009 MMEN22 M. Vynnycky (Royal Institute of Technology) Hot deformation simulation of modified AISI 5120 low alloy steel, D. Boschetti (Universidade Estadual de Campinas), A. P. Braga (Instituto de Pesquisas 11:40 2171 MMEN23 Tecnológicas do Estado de São Paulo ), P. F. da S. Farina (Universidade Estadual de Campinas) 12:00 Lunch TIME CODE Metallurgical Processes, Processes with Material Removal Effect of the oxide film on the sliding wear behavior of a CoCrMoSi alloy hardfacing coating, A. S. D'Oliveira (Universidade Federal do Paraná), J. M. Claros (Corporación 13:30 2328 MMEN24 Mexicana de Investigación en Materiales S. A. de C. V.), E. Nascimento (Universidade Tecnológica Federal do Paraná) EDM and turning machining surface preparation influence on the adhesion of 13:50 2335 MMEN25 aluminum thermally sprayed coatings, G. M. Bozza, A. G. M. Pukasiewicz, A. Derrien, M. V. de Carvalho, I. Santos (Universidade Tecnológica Federal do Paraná) Tribological behavior of jaspilite evaluated by micro-scratch test, R. Magnol (Universidade Federal do Espírito Santo), M. Macedo (Geosol Geologia e 14:10 2398 MMEN26 Sondagens SA), M. de Macêdo, C. Scandian (Universidade Federal do Espírito Santo) A study about the effects of emulsifiable oil concentration over the roughness in automotive aluminum, Al-Si (10 ~ 12%), parts, after milling using a PCD tool, G. Fernandes, M. Gomes (Universidade Federal de Minas Gerais), A. A. Silva (Instituto 14:30 0002 MMEN27 Euvaldo Lodi), P. R. Lopes (Universidade Federal de Minas Gerais), P. Sérgio, L. H. A. Maia, Í. B. dos Santos (Pontifícia Universidade Católica de Minas Gerais), B. Siqueira (Universidade Federal de São João del Rei) Drilling of high strength grey iron, grade 300, with refined graphite and Mo addition, A. E. da Silva (Faculdade Anhanguera de Anápolis), A. Reis(Universidade Federal de 14:50 0098 MMEN28 Uberlândia), A. R. Machado (Pontifícia Universidade Católica do Paraná), W. L. Guesser (Universidade do Estado de Santa Catarina) An analysis of surface roughness in turning/boring under different chatter conditions, 15:10 0203 MMEN29 G. S. Venter (Universidade de São Paulo), M. M. da Silva (Universidade de São Paulo) Cutting speed: effect on cutting forces and process damping in milling of 7050 T7451 15:30 0525 MMEN30 aluminum, R. Mundim, A. V. Borille (Instituto Tecnológico de Aeronáutica)

56 ORAL SESSION WED / 6 MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Processes with Material Removal Effects of mql on workpiece temperature and hole quality in deep drilling of SAE 8:30 0635 MMEN31 4144M steel, M. Polli, M. J. Cardoso (Universidade Tecnológica Federal do Paraná) Steel for mechanical applications: machinability evaluation of three similar medium- carbon alloys, A. D. Canal (universidade federal de viçosa), R. Mundim, P. 8:50 0717 MMEN32 Montenegro, A. V. Borille (Instituto Tecnológico de Aeronáutica), E. O. Lucas (Universidade Federal de Viçosa) A two-step approach to milling of thin walls encompassing constant cutting force 9:10 0848 MMEN33 and passive damping, R. Mundim, A. V. Borille (Instituto Tecnológico de Aeronáutica) Analysis of the influence of the hole depth on the geometric quality of the machined part, when the cutting fluid and the machining parameters are varied, C. Ramos , E. 9:30 0967 MMEN34 S. Costa, P. H. P. França, L. R. R. da Silva, W. Sales (Universidade Federal de Uberlândia), Á. R. Machado (Pontifícia Universidade Católica do Paraná) Performance evaluation of coated tungsten cemented carbide drills in cast iron 9:50 1133 MMEN35 drilling under different lubri-coolant conditions, L. R. R. da Silva (Universidade Federal de Uberlândia 10:10 Coffee-break TIME CODE Processes with Material Removal A discussion about the effectiveness of the shot peening over the fatigue behaviour of 10:40 1373 MMEN36 mettalic materials, D. G. Ribeiro, A. Í. S. Antonialli, R. P. Morais (Universidade Federal de São Carlos) The MQL's atmospheric air temperature influence in SAE 4340 steel cylindrical grinding using CBN grinding wheel, E. C. Bianchi, A. P. Francelin, K. M. Fragoso , J. C. 11:00 1584 MMEN37 Lopes, H. J. de Mello, L. Sanchez, P. Aguiar (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) Numerical and experimental models for orthogonal cutting, L. M. A. Borges, F. 11:20 1592 MMEN38 Figueiredo, J. L. Silveira, N. Dimas (Universidade Federal do Rio de Janeiro) Performance evaluation of a synthesized cutting fluid base, made from modified glycerin, using aluminum bars in turning operation, G. Fernandes, M. Gomes, P. R. 11:40 1690 MMEN39 Lopes (Universidade Federal de Minas Gerais), S. Clayton, L. H. A. Maia, P. Sérgio, B. Jakitsch, Í. B. dos Santos (Pontifícia Universidade Católica de MInas), A. A. Silva (Instituto Euvaldo Lodi), B. Siqueira (Universidade Federal de São João del Rei) 12:00 Lunch TIME CODE Processes with Material Removal Evaluation of the chip separation mechanism during machining of an austenitic 13:30 1813 MMEN40 stainless steel, G. M. Chagas (Instituto Federal de Santa Catarina), I. Machado(Universidade de São Paulo) Analysis of the influence of the hole depth on the geometric quality of the machined part, when the cutting fluid and the machining parameters are varied, C. Ramos, E. 13:50 1834 MMEN41 S. Costa, P. H. P. França, L. R. R. da Silva, W. Sales (Universidade Federal de Uberlândia), Á. R. Machado (Pontifícia Universidade Católica do Paraná) Built up layer formation in the super duplex stainless steel turning, J. Gamarra, A. 14:10 1947 MMEN42 Diniz (Universidade Estadual de Campinas) Cavitation erosion resistance of a Co28Cr22Fe alloy, M. C. Romero , J. Barbarioli 14:30 2055 MMEN43 (Universidade Federal do Espírito Santo), A. Tschiptschin (Universidade de São Paulo), C. Scandian (Universidade Federal do Espírito Santo) Assessing the environmental impacts of milling processes, G. Protazio (Universidade 14:50 2109 MMEN44 Estadual de Campinas), R. de S. Zanuto (IFCE-Campus de Sobral), A. Hassui (Universidade Estadual de Campinas), F. Lima (Universidade Federal do Ceará) Vortex tube air cooling in the turning, R. Viana, D. Araujo, D. B. Sousa, D. dos S. 15:10 2151 MMEN45 Oliveira, J. Goulart (Universidade de Brasília) Surface finish evaluation of AISI VP 100 after grinding with MQL technique with different flow rates, R. B. da Silva, B. Abrão, M. F. Pereira (Universidade Federal de Uberlândia), C. Guimarães (Instituto Federal do Triângulo Mineiro), L. S. V. da Silva, 15:30 2173 MMEN46 R. Ruzzi (Universidade Federal de Uberlândia), E. C. Bianchi (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru), Á. R. Machado (Pontifícia Universidade Católica do Paraná) 57 ORAL SESSION THU / 7 MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Processes with Material Removal Innovative perspective in the development and processing of difficult-to-cut alloys for 8:30 Invited manufacturing activities, E. Ezugwu (Air Force Institute of Technology, Nigeria) Machining optimization analysis for the production of C110 steel specimen, N. C. Andrade (Universidade Federal de Minas Gerais), H. do B. S. X. Moreira (Centro Universitário UNA), P. Sérgio (Pontifícia Universidade Católica de Minas Gerais), E. 9:10 2156 MMEN47 Cheikh (ABCM), F. Andrade (Centro Universitário Una), C. A. de S. Neves (Pontifícia Universidade Católica de Minas Gerais), G. Fernandes (Universidade Federal de Minas Gerais) Influence of lubricant on sliding wear of AISI 304, C. M. Clemente, E. G. C. Galárraga 9:30 2212 MMEN48 (Universidade de Brasília) Analysis of the relationship between metal removal rate and energy consumption in 9:50 2220 MMEN49 milling, R. Santos, M. Pereira, J. C. E. Ferreira (Universidade Federal de Santa Catarina) 10:10 Coffee-break TIME CODE Processes with Material Removal Aspects of Ti-6Al-4V drilling, M. Ribeiro, R. P. Gama (Universidade Estadual Paulista 10:40 2379 MMEN50 Júlio de Mesquita Filho) Study of a bench milling machine refrigeration system for laboratory environment, E. Cheikh, F. Andrade, V. Costa (Centro Universitário UNA), P. Sérgio (Pontifícia 11:00 2413 MMEN51 Universidade Católica de Minas Gerais), G. Fernandes, M. Gomes (Universidade Federal de Minas Gerais), A. A. Silva (Instituto Euvaldo Lodi) The vibration influence over CBN tool life in hardened boring operations using tool 11:20 2501 MMEN52 overhangs, W. Silva, A. Diniz, D. Suyama (Universidade Estadual de Campinas) Comparative analysis of two CBN grinding wheels performance in nodular cast iron plunge grinding, E. C. Bianchi, L. de M. Fernandes, J. C. Lopes, R. S. Volpato, P. 11:40 2789 MMEN53 Aguiar (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru), A.Diniz (Universidade Estadual de Campinas), H. J. de Mello (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) 12:00 Lunch TIME CODE Processes with Material Removal Analyzing the efficiency of the compressed air cleaning allied to the addition of water 13:30 2791 MMEN54 in the mql in grinding the AISI 4043 steel with CBN, E. C. Bianchi, B. Sato, J. C. Lopes, L. Sanchez, P. Aguiar (Universidade Estadual Paulista) Cylindrical external plunge grinding of AISI 4340 steel with interrupted geometry, E. 13:50 2857 MMEN55 C. Bianchi, D. Mello, H. J. de Mello, R. L. Rodriguez, J. C. Lopes (Universidade Estadual Paulista) Validation of a power measurement system in the milling process using hall sensors, 14:10 5609 MMEN56 L. R. R. da Silva, K. Okada, G. M. de Carvalho, E. S. Costa (Universidade Federal de Uberlândia), Á. R. Machado (Pontifícia Universidade Católica do Paraná) Hard turning of induction hardened SAE 1045 steel with PCBN tools under dry 14:30 5910 MMEN57 machining and minimum quantity of lubrication (MQL), M. A. Sampaio, F. L. Amorim, R. Torres, Á. R. Machado (Pontifícia Universidade Católica do Paraná) Analysis of the influence of cutting edge preparation in gun drill wear in deep drilling 14:50 5919 MMEN58 of AISI 4144M, M. Polli, L. Campos, R. Curce, M. J. Cardoso, M. Santana (Universidade Tecnológica Federal do Paraná) 15:10 ------15:30 ------

58 ORAL SESSION FRI / 8 MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Additive Manufacture Customized machining process solutions for high productivity with Iscar technology, 8:30 Invited E. S. Marreto (Iscar do Brasil) Residual thermal stress in fused deposition modelling, R. Q. de Macedo, R. T. L. 9:10 0124 MMEN59 Ferreira (Instituto Tecnológico de Aeronáutica) 3D printed PLA and PLA reinforced with short carbon fibers: an experimental 9:30 0135 MMEN60 characterization, R. T. L. Ferreira, R. T. L. Ferreira, I. Amatte, T. Dutra (Instituto Tecnológico de Aeronáutica), D. Bürger (Instituto de Aeronáutica e Espaço) Effect of finishing processes on the surface quality of titanium parts manufactured by 9:50 0280 MMEN61 the Laser Powder Bed Fusion process, M. F. Cruz (Embraer), A. V. Borille (Instituto Tecnológico de Aeronáutica), R. Kersting, T. B. Klein (Fraunhofer IPK) 10:10 Coffee-break TIME CODE Additive Manufacture A design for additive manufacturing method of direct metal parts for aerospace 10:40 1260 MMEN62 applications, M. F. Cruz (Embraer), A. V. Borille, L. G. Trabasso (Instituto Tecnológico de Aeronáutica), C. R. P. de Haro, F. Brandão (Embraer) Definition of parameters by process of additive manufacturing for tactile perception, 11:00 2359 MMEN63 R. L. Vieira, S. R. Marchi, M. L. Okimoto, A. Marques, R. S. C. Paredes (Universidade Federal do Paraná) Simulation study to evaluate the use of fully 3D printed injection molds optimized by 11:20 2730 MMEN64 topology, V. E. Beal, P. L. Pereira (SENAI CIMATEC), A. Silva (Universidade Federal da Bahia), L. A. G. Junior (SENAI CIMATEC) 11:40 ------12:00 Lunch

59 ORAL SESSION MON / 4 MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa - Bldg. 3 / Verde) TIME CODE Project and Management Project and construction of a polymer flow test device, A. Kuhl (Univille), S. Gomes 8:30 0188 MMEN65 (Instituto Federal de Santa Catarina) Development of an automated multiprocess welding mechanism, J. B. Gonçalves, I. M. Nunes, L. R. R. da Silva, D. R. S. da S. Araújo, G. Souza (Instituto Federal de 8:50 0254 MMEN66 Educação Ciência e Tecnologia do Espirito Santo), A. C. B. Zancanella (Universidade Federal do Espírito Santo) Application of a systemic hazard analysis to launch and rescue operation of a 9:10 0375 MMEN67 microgravity suborbital space vehicle, J. Fulindi, R. Pirk, L. E. L. da Costa (Instituto Tecnológico de Aeronáutica) Quality management and six sigma: comparing two approaches in the petrochemical sector, L. Fuscaldi, F. Aquino, L. Bernardino (Universidade Federal da 9:30 0850 MMEN68 Bahia), H. Lepikson (SENAI), A. S. Barbosa, A. R. de Jesus (Universidade Federal da Bahia) Hazards identification and risk assessment in a student mechanical workshop, A. E. 9:50 1361 MMEN69 Rocha Filho, B. Z. Haselein, P. H. Z. Messerschmidt, R. Serafin, A. Dias (Universidade Federal de Santa Catarina) 10:10 Coffee-break TIME CODE Project and Management Effects of design for maintainability in complex aircraft systems, E. A. P. Barreto, F. T. 10:40 1404 MMEN70 M. Abrahão (Instituto Tecnológico de Aeronáutica) Evaluation of the application of spherical roller bearing in flywheel used in belt 11:00 1714 MMEN71 conveyors, M. Rios (Pontifícia Universidade Católica de Minas Gerais), C. Vimieiro (Universidade Federal de Minas Gerais) A multi-criteria based approach for the production distribution in the poultry 11:20 1748 MMEN72 industry, W. R. Monteiro, G. R. Meza (Pontifícia Universidade Católica do Paraná) The lean product development: an application to refrigeration industry, M. S. de 11:40 1902 MMEN73 Oliveira, F. Forcellini, J. Lozano, J. Barbosa (Universidade Federal de Santa Catarina) 12:00 Lunch TIME CODE Project and Management Development of the mechanical structure of an active monoarticular orthosis for lower limb, E. Caetano, D. R. S. da S. Araújo, L. L. B. Bandeira (Instituto Federal de 13:30 1975 MMEN74 Educação Ciência e Tecnologia do Espirito Santo), A. C. B. Zancanella (Universidade Federal do Espírito Santo) Weight reduction of the pickup cargo bed by replacing metal panels with polymer 13:50 2015 MMEN75 composite materials, I. Pompeu, L. S. Vitorino, A. Avila (Universidade Federal de Minas Gerais) Applying the lean-triz hybrid approach into toyota kata for manufacturing systems 14:10 2052 MMEN76 improvement, T. B. Fernandes, F. Forcellini (Universidade Federal de Santa Catarina) A lean six sigma implementation model based on critical success factors, A. B. 14:30 2095 MMEN77 Ribeiro, F. Forcellini, M. Pereira, H. A. Ferenhof (Universidade Federal de Santa Catarina) Statistical process control application in automotive industry, E. Teixeira, T. Dias, M. 14:50 2905 MMEN78 Andrade, A. Oliveira (Universidade de Brasília) Project and development of an underwater vehicle in the shape of a sea turtle, A. H. 15:10 2170 MMEN79 M. Bezerra, M. B. Nogueira (Universidade Federal do Rio Grande do Norte) 15:30 ------

60 ORAL SESSION TUE / 5 MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa - Bldg. 3 / Verde) TIME CODE Materials Characterization and Processing Study of the dynamic properties of a SMA mechanically shaped by hot rolling and ECAE, P. S. dos S. Barbosa, N. Silva (Instituto Federal de Pernambuco), C. Gonzalez, 8:30 0330 MMEN80 C. Oliveira (Universidade Federal de Pernambuco), C. J. de Araujo (Universidade Federal de Campina Grande) Evaluation of interfacial fibre/matrix strength in natural hybrid composites, R. de A. 8:50 0444 MMEN81 A. Lima, D. K. Cavalcanti, J. Neto, H. Costa, R. A. A. de Aguiar, D. Banea (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Mechanical characterization of hybrid natural fibers composites, D. K.Cavalcanti, J. 9:10 0446 MMEN82 Neto, R. de A. A. Lima, S. R. de Barros, D. Banea (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Mechanical behavior of composite of polyurethane reinforced with cotton fiber and 9:30 0501 MMEN83 alumina trihydrate, A. Silva, E. H. P. da Silva, D. Janes, S. M. Domiciano, R. R. C. da Costa (Universidade Tecnológica Federal do Paraná) Bio-PCM thermophysical characterization through the T-history method, L. Lira, M. 9:50 0545 MMEN84 M. Monteiro (Universidade de Brasília) 10:10 Coffee-break TIME CODE Materials Characterization and Processing Environmental aging in polymeric composites using curauá fiber, R. Felipe, R. Felipe (Instituto Federal de Educação Ciência e Tecnologia do Rio Grande do Norte), A. 10:40 1120 MMEN85 Batista (Universidade Federal Rural do Semi-Árido), E. M. F. de Aquino (Universidade Federal do Rio Grande do Norte) Study of fibers obtained from the vegetable specie montrichardia linifera (araceae) to evaluation of their technological application, E. L. S. Amaral (Universidade Estácio de 11:00 0698 MMEN86 Sá), D. Brabo (Universidade Estácio de Sá), J. Lopes (Universidade do Estado do Pará ) Mechanical performance of a novel jute fiber bio-composite used as a trunk tray material, F. N. Q. dos Santos (Centro Federal de Educação Tecnológica de Minas 11:20 1034 MMEN87 Gerais), R. Braga (Faculdade Pitágoras), H. Augusto, S. M. S. Pinheiro (Universidade Federal de Minas Gerais) Assessment of mill scale formation in steel industries using thermogravimetric 11:40 0581 MMEN88 analysis, L. M. R. N. da Costa, I. Ávila, J. Carvalho (Universidade Estadual Paulista), G. L. A. A. Ferrufino (Instituto Nacional de Pesquisas Espaciais) 12:00 Lunch TIME CODE Materials Characterization and Processing The influence of prior heat treatment on nitriding of AISI H13 steel, R. L. Villanova 13:30 0302 MMEN89 (Universidade Tecnológica Federal do Paraná) Influence of CO2 addition in the shielding gas of inconel 625 weld overlays deposited 13:50 0704 MMEN90 by GMAW, A. Tavares (Universidade Federal do Rio Grande - FURG) Development of an equipment to evaluate the susceptibility to hydrogen assisted 14:10 0747 MMEN91 cracking, G. Martiniano, D. Souza, J. E. S. Leal, S. Franco (Universidade Federal de Uberlândia) Relaxation stress in austenitic stainless steel ASTM F-1586, E. Silva, C. Campos 14:30 0558 MMEN92 (Universidade CEUMA ) Detection of ferrite phase transformation by induced magnetic field on a duplex stainless steel, E. Silva (Instituto Federal de Educação, Ciência e Tecnologia da Paraíba), A. Andrade (Universidade Federal da Paraíba), F. de Oliveira (Instituto 14:50 1035 MMEN93 Federal de Educação, Ciência e Tecnologia da Paraíba), M. N. A. Lima (Universidade Federal da Paraíba), J. Leite, J. Leite (Universidade Federal de Campina Grande), M. M. R. da Silva (Universidade Federal da Paraíba) Detection of microstructure anisotropy using induced magnetic fields, E. Silva (Instituto Federal de Educação, Ciência e Tecnologia da Paraíba), A. Andrade 15:10 1036 MMEN94 (Universidade Federal da Paraíba), J. Leite, J. Leite (Universidade Federal de Campina Grande), M. M. R. da Silva (Universidade Federal da Paraíba) Evaluation of chip-breakers manufactured by ultrashort laser pulses in cemented carbide tools, A. G. Pereira, M. B. Carneiro (Escola de Engenharia de São Carlos), P. 15:30 1256 MMEN95 A. Barbosa (Universidade Federal do Espírito Santo), R. Samad, N. Vieira, W. de Rossi (Instituto de Pesquisas Energéticas e Nucleares) 61 ORAL SESSION WED / 6 MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa – Bldg. 3 / Verde) TIME CODE Materials Characterization and Processing Optical metrology applied on the 4.0 industry – State of art and future applications 8:30 Invited and development, V. Massaroti (VTECH- Brazil) Study of fatigue behavior in sandwich composite with fiber glass and epoxy resin as 9:10 1279 MMEN96 core, J. Cheloni, M. E. Silveira, J. de Avila Jr, L. de S. Souto, J. N. Brito (Universidade Federal de São João del Rei) Study of the mechanical performance of semi-ecological composites sisal / polyester and curauá / polyester, J. Santos (Instituto Federal de Educação, Ciência e 9:30 1283 MMEN97 Tecnologia do Ceará), R. C. S. Freire Jr (Universidade Federal do Rio Grande do Norte), C. Cruz (Instituto Federal da Bahia) Study on the flexural-shear strength of hybrid composites reinforced sisal/cana- 9:50 2088 MMEN98 brava, D. Bispo, G. de Jesus, M. Silva, R. Carvalho (Universidade Federal da Bahia), A. C. R.l da Conceição (Instituto Federal da Bahia) 10:10 Coffee-break TIME CODE Materials Characterization and Processing Viscoelastic properties of PVDF investigated by dynamic mechanical analysis, J. M. L. 10:40 1551 MMEN99 dos Reis, I. Leite (Universidade Federal Fluminense), J. Sousa (CEFET-RJ), H. da C. Mattos (Universidade Federal Fluminense) Analysis of the thermo-physical characteristics of Al-Fe-Zr-(1,8; 5,0)wt%Mg alloys solidified in horizontal unidirectional mold, Y. Campo (Universidade Federal de 11:00 1350 MMEN100 Santa Maria), M. V. Wanderley, R. A. da Silva, M. Lobato, J. M. do V. Quaresma (Universidade Federal do Pará) Rapid Solidification and Characterization of Ni-Nb alloys, C. R. M. Afonso 11:20 1389 MMEN101 (Universidade Federal de São Carlos) Comparative study of physical and simulated tensile tests of steels SA-516 Gr.70, SA- 11:40 1667 MMEN102 240 TP.316L and SA-516 Gr.70 + SA-240 TP.316L cladded by rolling process, B. Nascimento, J. R. G. Carneiro (Pontifícia Universidade Católica de Minas Gerais) 12:00 Lunch TIME CODE Materials Characterization and Processing Study of AISI 4340 steel used in Petroleum Extraction Pipes, Y. Costa (Centro 13:30 1711 MMEN103 Universitário UDF), L. L. D. Morales (Universidade de Brasília), H. de A. Pegado (Centro Universitário UDF) Mathematical modeling of sensors elements using graphite, R. Gabbi, L. A. Rasia, A. 13:50 1805 MMEN104 C. Valdiero (Universidade Regional do Noroeste do Estado do Rio Grande do Sul), M. T. T. Gabbi (Universidade Federal de Santa Maria) Study of chromium oxide coatings by RF magnetron sputtering in metal dusting 14:10 1382 MMEN105 conditions, D. V. M. Maximo (Instituto Tecnologico y de Estudios Superiores de Monterrey ), O. Salas (Tecnologico de Monterrey-CEM) Transparent and conductive films of reduced graphene oxide: spray deposition and 14:30 1901 MMEN106 characterization, A. M. Lima, G. Faria, R. Medeiro, L. Cruz, W. A. Pinheiro (Instituto Militar de Engenharia) The freeze casting method as a production alternative for ceramic capillary 14:50 1945 MMEN107 evaporators, F. M. Baumgratz, M. V. Oro, E. Bazzo (Universidade Federal de Santa Catarina) Characterization and study of stability in crude oil of the ceramic composite alumina-zirconia-lantania produced by solid state sintering at different 15:10 1949 MMEN108 temperatures, B. Constantino, L. Albuquerque, R. A. S. Ferreira, Y. P. Yadava (Universidade Federal de Pernambuco) Development and manufacture of inert coating to crude oil based on yttria stabilized zirconia-titania ceramics to manufacture system to store and transport petroleum, 15:30 2046 MMEN109 A. Sousa (Instituto Federal de Pernambuco), R. Domingues, Y. P. Yadava, R. A. S. Ferreira (Universidade Federal de Pernambuco)

62 ORAL SESSION THU / 7 MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa - Bldg. 3 / Verde) TIME CODE Materials Characterization and Processing The influence of the as-cast microstructure of Al-Mg-Si alloy on the corrosion 8:30 2031 MMEN110 behavior, L. Pessoa, D. Rosa (Universidade de Brasília) Ball on plane rolling tests to evaluate gears contact fatigue, P. D. N. Tayer, N. 8:50 2080 MMEN111 Fukumasu, R. Stoeterau, I. Machado (Universidade de São Paulo), G. A. A. Machado (Fiat Chrysler) Study on friction torque models in grease lubricated bearings, B. K. Borges, T. 9:10 2091 MMEN112 Cousseau (Universidade Tecnológica Federal do Paraná) Non-isothermal kinetics of the thermal degradation of hemicellulose extracted from 9:30 2110 MMEN113 curauá fibers by alkali treatment, V. D. Libera Jr., M. R. de Oliveira, S. Luz (Universidade de Brasília) A new computational method for determining the parameters of Johnson-Cook 9:50 2129 MMEN114 model, C. A. A. Viana, M. Miguel (Universidade Estadual Paulista) 10:10 Coffee-break TIME CODE Materials Characterization and Processing Production of AlN thin films via deep oscillation magnetron sputtering for 10:40 2719 MMEN115 biosensors, O. Salas , D. V. M. Maximo (Tecnológico de Monterrey-CEM), J. Lin (SouthWest Research Institute) Mechanical and flammability properties of green polyurethane foam with alumina 11:00 2180 MMEN116 trihydrate as flame retardant, A. Silva, E. H. P. da Silva, D. Janes, R. R. C. da Costa, G. G. C. Silva (Universidade Tecnológica Federal do Paraná) Inconel® 625 wire laser cladding: process parametrization to produce high quality coatings for metalworking industry, V. K. Fernandes, A. Lauffs, A. de S. P. Pereira, J. 11:20 2245 MMEN117 Gutjahr, M. Pereira, W. L. Weingaertner (Universidade Federal de Santa Catarina), E. W. Teichmann (Instituto Federal de Santa Catarina) Evaluation of microhardness profile of a joint welded with dissimilar steels, F. 11:40 2336 MMEN118 Cavalcante (Universidade Federal Rural do Semi-Árido), J. G. de Almeida, S. M. A. Duart, E. C. da Costa, S. J. G. de Lima (Universidade Federal da Paraíba) 12:00 Lunch TIME CODE Materials Characterization and Processing A study on the influence of ecap die design and backpressure on the deformation and mechanical properties of a SAE 1045 steel, R. S. Namur, M. T. Izumi, M. 13:30 2364 MMEN119 Azevedo, M. F. Hupalo, O. Cintho (Universidade Estadual de Ponta Grossa), K. Zilnyk (Instituto Federal de São Paulo) Yb-fiber powder laser cladding of Inconel 625, V. K. Fernandes, A. de S. P. Pereira, J. 13:50 2254 MMEN120 Gutjahr, M. C. Fredel, M. Pereira, W. L. Weingaertner, A. Laschkow (Universidade Federal de Santa Catarina) Plasma nitriding of Fe-Al ferritic alloys at 500 and 550 ºC, F. I. Zanetti, L. L. Santos, I. 14:10 2407 MMEN121 Zanella, G. S. Kobayashi, S. Brunatto, R. P. Cardoso (Universidade Federal do Paraná) Thermal evaluation of seats and backrest with natural fibers, D. Weiss, M. L. 14:30 2432 MMEN122 Okimoto, G. Oliveira (Universidade Federal do Paraná) Production and study of stability in crude oil of Al2O3- ZrO2 composite ceramic reinforced with rare earth oxide (CeO2) for use as metal matrices coating, Y. P. 14:50 2599 MMEN123 Yadava, B. Constantino, R. A. S. Ferreira, M. B. Padilha (Universidade Federal de Pernambuco), R. Cordeiro (Instituto Federal de Pernambuco) A comparative study of hardfacing techniques: microstructure and wear performance of NiCrSiBC coatings processed by arc and laser, L. J. da Silva 15:10 2684 MMEN124 (Universidade Federal de Uberlândia), C. Scheuer (Universidade Federal de Santa Maria), A. S. D'Oliveira (Universidade Federal do Paraná) First results of the cavitation erosion behavior for low-temperature plasma carburized martensitic stainless steel, F. Severo, R. P. Cardoso, S. Brunatto 15:30 2687 MMEN125 (Universidade Federal do Paraná), C. Scheuer (Universidade Federal de Santa Maria)

63 ORAL SESSION FRI / 8 MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa - Bldg. 3 / Verde) TIME CODE Materials Characterization and Processing Dog wool: study of the physical and thermal properties, F. C. da Silva (Universidade 8:30 0885 MMEN126 Federal de Santa Catarina), R. Ladchumananandasivam, J. U. de Lima Mendes (Universidade Federal do Rio Grande do Norte) Effect of Ni content on the hardenability of a bainitic steel for plastics processing, J. 8:50 1174 MMEN127 B. Bacalhau, C. R. M. Afonso (Universidade Federal de São Carlos) Evaluation of the properties of the epoxy resin by adding layered double hidroxides, 9:10 2774 MMEN128 A. W. X. Jargenboski, G. B. Dutra (Universidade Federal de Santa Catarina) Microstructural and mechanical characterization of Hardox 450 steel, B. de Oliveira, D. Zeferino, L. C. Vieira, M. Costa, C. J. de Oliveira (Pontifícia Universidade Católica 9:30 2892 MMEN129 de Minas Gerais), M. Câmara (Universidade Federal de Minas Gerais), P. H. A. Santos, S. S. F. de Dafé (Pontifícia Universidade Católica de Minas Gerais) CNT and go epoxy nanocomposites - an experimental comparison of mechanical 9:50 2920 MMEN130 properties, M. B. Moraes, G. Thim (Comando da Aeronáutica) 10:10 Coffee-break

64 ORAL SESSION MON / 4 MECH1 - Mechatronics and Automation (Room 3 – Bldg. 4 / Laranja) TIME CODE Control Systems Modeling and control of tandem cold rolling mills, A. Leoni, J. A. Castro 8:30 0196 MECH1 (Universidade Federal Fluminense), P. Alves (Instituto Federal do Rio de Janeiro) Quadrotor aerial vehicles under actuator failures - an adaptive approach, M. K. de C. 8:50 0374 MECH2 Cunha, D. A. dos Santos, E. Hemerly (Instituto Tecnológico de Aeronáutica) Open loop control system and tools for data acquisition and feature extraction of the 9:10 0469 MECH3 weld bead geometry in gmaw process, G. A. Bestard, R. Thompson, S. C. A. Alfaro (Universidade de Brasília) Neuro-fuzzy control and differential evolution in the compensation of the actuators’ 9:30 0506 MECH4 dead zone of a two-wheeled vehicle, B. L. Pereira, L. Sanches, J. J. P. Z. de S. Tavares (Universidade Federal de Uberlândia) Evolution of an experiment to assess pilot behaviour in flight simulators, D. H. Arjoni, 9:50 0727 MECH5 E. Villani, A. D. Kraemer (Instituto Tecnológico de Aeronáutica) 10:10 Coffee-break TIME CODE Control Systems Contributing to the implementation of a vision-based control strategy for a planar 10:40 0822 MECH6 parallel manipulator, F. T. Colombo, J. V. de C. Fontes, M. M. da Silva (Universidade de São Paulo) Development of transfer function library from Arduino® light sensor system using 11:00 1075 MECH7 Scilab Xcos simulation, C. Vaz, I. L. da Silva, A. R. B. Baldo, L. A. D. Koslowski (Universidade do Estado de Santa Catarina) Embedded control strategy for an active suspension using a low-cost hardware in the 11:20 1104 MECH8 loop platform, A. B. C. de Farias, R. S. Rodrigues, A. Pinto, R. Lopes, S. Avila (Universidade de Brasília) Control system design for an exoskeleton of the right lower limb, M. Koendjbiharie, 11:40 1114 MECH9 D. Munoz, C. H. Llanos (Universidade de Brasília) 12:00 Lunch TIME CODE Control Systems Design of an embedded system for water temperature control in a solar assisted heat 13:30 1176 MECH10 pump, T. de F. Paulino, E. Fonseca, A. Maia, L. Machado, R. Koury (Universidade Federal de Minas Gerais) H∞ and model reference adaptive control of a series elastic actuator for robotic 13:50 1210 MECH11 rehabilitation: preliminary results, J. Campo, J. C. P. Ibarra, F. M. E. Ortega, A. L. J. Alarcon, M. Terra, A. Siqueira (Universidade de São Paulo) Automation learning environment based on fuzzy systems, S. A. Ribeiro, J. Medeiros, 14:10 1221 MECH12 R. Pinho (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), N. Rodrigues, L. Bionde (Universidade Estadual do Rio de Janeiro) Control of a brushless DC motor by a fractional order PID controller with a radial 14:30 1528 MECH13 basis function neural network tune method, S. N. S. Nunes, F. Lopes, A. Maia (Universidade Federal de Minas Gerais) UAV control loops design tested in an hil plataform, M. H. dos Santos, N. M. F. 14:50 1764 MECH14 Oliveira, B. Maciel (Instituto Tecnológico de Aeronáutica) Support vector regression based nonlinear model predictive control on FPGA, R. Sampaio (Universidade de Brasília), C. E. S. Santos (Instituto Federal de Educação, 15:10 1772 MECH15 Ciência e Tecnologia de Tocantins), C. H. Llanos, R. Jacobi (Universidade de Brasília), L. Coelho (Pontifícia Universidade Católica do Paraná), H. V. H. Ayala (IBM Research) 15:30 ------

65 ORAL SESSION TUE / 5 MECH1 - Mechatronics and Automation (Room 3 - Bldg. 3 / Laranja) TIME CODE Control Systems Experimental results on pose regulation, tracking and formation control of nonholonomic robots using potential functions, J. Gouvêa, T. H. da Silva, A. Zachi 8:30 1785 MECH16 (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), F. Lizarralde (Universidade Federal do Rio de Janeiro) Actuation and control of electric valves for a magnetic refrigerator, G. Hoffmann, S. 8:50 1827 MECH17 L. Dutra, P. Cardoso, A. Nakashima, J. Lozano, J. Barbosa (Universidade Federal de Santa Catarina) Multipoint ethanol injection system for diesel engines, A. R. A. Achy, W. Souza, J. A. dos S. Silva, G. G. Demetino (Universidade Federal da Bahia), L. C. Soares Jr., V. 9:10 1993 MECH18 Ferreira (Universidade Federal do Recôncavo da Bahia), I. M. Pepe (Universidade Federal da Bahia) Development of a reduced scale plant for continuous industrial process simulation 9:30 2320 MECH19 and fluid level control in communicating vessels, M. V. Lima, C. Matos, L. Teixeira, M. Brito, E. G. Teodozio (Universidade Federal da Bahia) A low-cost automatic control system for HDPE pipes weldment, I. Souza, C. Carvalho, 9:50 2411 MECH20 W. Andrade, F. L. e Silva (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) 10:10 Coffee-break TIME CODE Control Systems Data analysis about flight dynamics: a review to apply machine learning techniques 10:40 2527 MECH21 in unmanned aerial vehicles, G. P. Oliveira, R. M. Finzi Neto, J. M. Vedovoto, L. Sanches (Universidade Federal de Uberlândia) Pod device development for small scale propeller model tests, J. M. P. de Souza, J. L. 11:00 2528 MECH22 D. Dantas, F. S. de Castro, A. M. Kogishi (Instituto de Pesquisas Tecnológicas do Estado de São Paulo) Motor synchronization using real time PROFINET IO class 1, P. Mattos, N. Mastelari, 11:20 2689 MECH23 F. Lara (Universidade Estadual de Campinas) An experimental evaluation of the parallella platform using model-based predictive 11:40 2706 MECH24 control as a case study, M. Soudre, C. H. Llanos, Renato Sampaio (Universidade de Brasília) Project and simulation of PID fuzzy controller for a hydraulic proportional system, J. 12:00 2868 MECH25 C. A. Carvalho, G. C. da Silva Neto, J. M. Louzada Neto, P. R. O. Martins (Universidade Federal do Amazonas) 12:20 Lunch TIME CODE Computer Vision Comparison of filtering methods for stereo visual-inertial navigation of multirotor 13:30 1006 MECH26 aerial vehicles, B. A. Asfora, D. A. dos Santos (Instituto Tecnológico de Aeronáutica) Analysis and design of test bench for a hexapod robot, N. S. Sánchez, H. D. Torres, B. 13:50 1046 MECH27 F. Contreras, N. S. Coy, R. D. H. Beleño, M. A. J. Gómez, R. J.Moreno (Universidad Piloto de Colombia) Performance evaluation of a multiscale descriptor to detect feature points on object 14:10 1193 MECH28 borders in range images, J. M. S. T. da Motta, G. I. Pizo, J. M. S. T. da Motta (Universidade de Brasília) Density based fish counting with computer vision for aquarium and box storage in 14:30 1676 MECH29 noisy environments, T. H. G. Lobato, G. da S. V. de Melo (Universidade Federal do Pará) Computer vision system for the evaluation of laser marking processing, M. K. Dutra, 14:50 2000 MECH30 M. Stivanello (Instituto Federal de Santa Catarina), M. Pereira (Universidade Federal de Santa Catarina) Visual servoing stabilization of a ball and plate mechanism by using an enhanced disturbance rejection control method, A. Zachi, S. R. D. Riveros, P. P. P. Lima, J. 15:10 2623 MECH31 Gouvêa (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), A. Leite (Pontifícia Universidade Católica) 15:30 ------

66 ORAL SESSION WED / 6 MECH1 - Mechatronics and Automation (Room 3 – Bldg. 3 / Laranja) TIME CODE Robotics, Sensors & Actuators Kinect and wearable robots, R. S. Gonçalves, I. Rodrigues (Universidade Federal de 8:30 0240 MECH32 Uberlândia), H. Krebs (Massachusetts Institute of Technology, USA), R. S. Gonçalves (Universidade Federal de Uberlândia) Time of flight ultrasound indoor navigation system, E. Reis, C. L. Nascimento Jr., N. 8:50 0316 MECH33 M. F. Oliveira (Instituto Tecnológico de Aeronáutica) Offline viewpoint planning for underwater inspection using octomap, B. L. Floriani, L. 9:10 0474 MECH34 Weihmann, H. Simas (Universidade Federal de Santa Catarina), N. Palomeras, P. Ridao (University Of Girona) Modelling and control of a macro-micro system using interaction controllers, G. J. G. 9:30 1068 MECH35 Lahr, L. Costa, T. Boaventura, G. Caurin (Universidade de São Paulo) Stepped sine and multisine signal excitation for identification in a small amb test rig, 9:50 0414 MECH36 D. A. G. Diaz, F. A. de N. C. Pinto, T. Ritto, D. J. G. Maldonado (Universidade Federal do Rio de Janeiro) 10:10 Coffee-break TIME CODE Robotics, Sensors & Actuators Navigation routines using only integer calculations for minimum code footprint, E. 10:40 0317 MECH37 Reis (Instituto Tecnológico de Aeronáutica) Isotropic wrench capability maps and isotropic velocity capability maps for a 3RRR 11:00 0539 MECH38 planar parallel manipulator, L. M. Rincon, D. Ponce, J. Frantz, D. Martins, H. Simas (Universidade Federal de Santa Catarina) Development of a new modular variable stiffness actuator, F. da S. Rosa, E. H. 11:20 0791 MECH39 Murai, J. V. F. Brito, D. Martins, H. Simas (Universidade Federal de Santa Catarina) Development of a didactic robotic cell for handling by the arduino application, F. 11:40 0869 MECH40 Silva, F. Moreira, A. C. Ferraz, W. Lopes, R. Fornitano, A. Gonçalves (Centro Universitário Salesiano de São Paulo) 12:00 Lunch TIME CODE Robotics, Sensors & Actuators Selecting kinematic structures using the actuated degree-of-control, E. H. Murai, R. 13:30 0890 MECH41 Simoni, D. Martins (Universidade Federal de Santa Catarina) Backstepping and PIV control applied to magnetic levitation, W. Souza, M. E. M. 13:50 0941 MECH42 Meza, G. R. R. da Silva, E. Rafikova (Universidade Federal do ABC) Development of a novel perpendicularity correction method for robotic manipulators 14:10 0994 MECH43 applied to aerospace domain, W. Oliveira, T. N. Cunha, G. B. Rodamilans, E. Villani, L. G. Trabasso (Instituto Tecnológico de Aeronáutica) Self compensating capacitive fluid level sensor, E. Reis (Instituto Tecnilógico de 14:30 0318 MECH44 Aeronáutica) An efficient selective modal H-infinity control for mechanical structures, H. Genari 14:50 1029 MECH45 (Universidade Tecnológica Federal do Paraná), E. Nóbrega, P. S. Meirelles (Universidade Estadual de Campinas) Design and simulation of a bio-inspired leptynia hispanica hexapod robot, N. S. 15:10 1045 MECH46 Sánchez, B. F. Contreras, N. S. Coy, H. D. Torres, R. D. H. Beleño, M. A. J. Gómez (Universidad Piloto de Colombia) Dynamics of torsional slender systems under action of a ℒ1 adaptive controller, G. 15:30 1057 MECH47 Sampaio, H. I. Weber (Pontifícia Universidade Católica do Rio de Janeiro)

67 ORAL SESSION THU / 7 MECH1 - Mechatronics and Automation (Room 3 - BL. Laranja) TIME CODE Robotics, Sensors & Actuators Implementing a ICP based Controller for Skippy, A. Bento Filho (Universidade 8:30 1081 MECH48 Federal do Espírito Santo), G. Wiedebach, J. Pratt (Florida Institute For Human & Machine Cognition, USA) Single joint-link experimental calibration for the NAO humanoid robot, J. M. S. T. da 8:50 1195 MECH49 Motta, H. C. Demolinari (Universidade de Brasília) Algebraic tension conditions in cable-driven mechanisms, T. Muraro, D. Martins, L. 9:10 1285 MECH50 Sacht (Universidade Federal de Santa Catarina) Model predictive control for path tracking of a UAV subject to aerodynamic 9:30 1370 MECH51 disturbances, G. M. V. Ladeira, G. V. Lima, R. Souza (Universidade Federal de Uberlândia) Robotic platform with passive suspension to be applied on soybean crops: initial results, V. Higuti, A. E. B. Velasquez, M. V. Gasparino, G. C. de Oliveira, C. I. A. 9:50 1647 MECH52 Carrasco, J. C. Risardi, D. Magalhães, M. Becker (Universidade de São Paulo), D. M. B. P. Milori (Embrapa Instrumentação) 10:10 Coffee-break TIME CODE Robotics, Sensors & Actuators Design, analysis and software correction for the performance of a scara robot, W. de 10:40 1655 MECH53 B. Vidal Filho, O. P. M. de Mello, E. Rocha (Universidade de Brasília), L. F. C. e S. Vidal (Universidade Federal de Pernambuco) Submersible drone: localization of missing people’s victims of drowning, F. S. 11:00 1719 MECH54 Aureliano, A. Lopes (Centro Universitário do Sul de Minas) Development of an algorithm to support visually impaired people using ultrasonic 11:20 1720 MECH55 sensors, R. Santos, J. Ferreira, T. H. G. Lobato, G. da S. V. de Melo (Universidade Federal do Pará) Development of a remotely operated vehicle capable of movement on marsh terrains 11:40 1765 MECH56 and rubble, D. H. do N. Viola, M. F. de S. Moreira, G. Taurinho, L. Faria, G. H. Correa (Centro Universitário Newton Paiva) 12:00 Lunch TIME CODE Robotics, Sensors & Actuators Control of a tendon-driven robotic hand from surface electromyographic signals, C. 13:30 1881 MECH57 Malqui, M. A. Meggiolaro (Pontifícia Universidade Católica do Rio de Janeiro) Simulation and experimental validation of the dynamic modeling of a 3-RPR 13:50 2116 MECH58 mechanism using power flow approach, A. N. de Albuquerque, M. Speranza Neto, M. A. Meggiolaro (Pontifícia Universidade Católica do Rio de Janeiro) Proposal of activation and position control of the prototype of an active orthosis for 14:10 2186 MECH59 lower limb, E. Caetano, D. R. S. da S. Araújo, L. L. B. Bandeira, A. C. B. Zancanella, C. Souza (Instituto Federal de Educação Ciência e Tecnologia do Espírito Santo) Development of a low cost automated valve for fluid level control in communicating 14:30 2255 MECH60 vessels, M. V. Lima, C. Matos, L. Teixeira, M. Brito, I. M. Pepe (Universidade Federal da Bahia) Economic viability in the automation of wheel chair conventional: engineering 14:50 2302 MECH61 applied to social development, D. L. U. de Andrade, L. Veraldo Jr., R. E. S. Cabette (Centro Universitário Salesiano de São Paulo) Simulation and implementation of impedance control in robotic hand, S. A. P. 15:10 2327 MECH62 Mendez, C. H Llanos, Daniel Munoz (Universidade de Brasília) Development of a climbing robot with magnetic wheels, O. S. de Lima Jr, F. Lopes e 15:30 2215 MECH63 Silva, C. Carvalho, M. B. Michels, L. S. C. Raptopoulos (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca)

68 ORAL SESSION FRI / 8 MECH1 - Mechatronics and Automation (Room 3 - Bldg. 3 / Laranja) TIME CODE Robotics, Sensors & Actuators Development and characterization of a 2D phased array ultrasonic transducer for 8:30 2391 MECH64 underwater applications, E. P. Rodrigues, T. F. de Oliveira, F. Buiochi (Universidade de São Paulo) Robotic hand controlled by electromyographic signals, P. Skrdlik, R. Figueiredo, C. 8:50 2419 MECH65 Carvalho, F. Lopes e Silva, L. S. C. Raptopoulos, W. Andrade (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Design and construction of dynamic simulator for testing the child’s restraint 9:10 2571 MECH66 systems, V. C. de Souza, A. C. F. de Arruda, A. F. P. Tavares (Universidade Estadual de Campinas) Experimental measurement of the electro mechanical parameters of an energy 9:30 2698 MECH67 harvesting system using cantilever beam, R. de M. Moraes, N. Mastelari (Universidade Estadual de Campinas) Angular control of a rotating platform using two reaction wheels, M. F. P. A. dos 9:50 2773 MECH68 Santos, B. Santos, R. Bachega, A. Campo (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo) 10:10 Coffee-break TIME CODE Robotics, Sensors & Actuators; Fluid Power Systems Modelling a subsea hydraulic actuator for ultra-deep water, R. M. Goularte, V. J. De 10:40 0628 MECH69 Negri (Universidade Federal de Santa Catarina), A. Orth (Bosch Rexroth AG) Modelling the hydraulic circuit of an automatic transmission, T. Macedo, V. J. De 11:00 0761 MECH70 Negri (Universidade Federal de Santa Catarina), L. Serfert Jr. (Ford Motor Company) Hydraulic-pneumatic regenerative system for hybridization of commercial urban 11:20 1787 MECH71 vehicles, R. R. da S. Bravo (Instituto Federal de Santa Catarina), A. A. M. Oliveira, A. T. C. Gama, V. J. De Negri (Universidade Federal de Santa Catarina) Pneumatic muscle with smart braid used in orthosis, R. Oliveira (Centro Universitário 11:40 1423 MECH72 de Brasília), N. Souza, D. M. Viana (Universidade de Brasília) 12:00 Lunch

69 ORASL SESSION THU / 7 MECH2 - Mechatronics and Automation (Room 3 - Bldg. 3 / Laranja) TIME CODE Artificial Intelligent Applications, Metrology Simultaneous localization and mapping of a mobile robot using a Kinect v2 sensor in 13:30 0296 MECH73 indoor environments, J. C. V. Soares, M. A. Meggiolaro (Pontifícia Universidade Católica do Rio de Janeiro) Use of artificial neural networks for identification of the electric submersible pump 13:50 0304 MECH74 performance working with a viscous fluid, L. F. B. Salamanca, A. Serpa, N. Sassim, J. L. Biazussi, W. M. Verde (Universidade Estadual de Campinas) Analysis of MLP Artificial Neural Network architecture for E423 airfoil, B. Diniz, T. 14:10 0924 MECH75 Medeiros, L. L. Nascimento (Universidade Federal da Bahia) Screw kinematic model for robot calibration with pc-robot communication overview, 14:30 0355 MECH76 L. Kato, T. Pinto, H. Simas, D. Martins (Universidade Federal de Santa Catarina) Analysis of Fit System in the programming environment MATLAB, F. M. Farias Filho, 14:50 0950 MECH77 R. Fonseca, C. da R. Souto (Universidade Federal da Paraíba) Closed loop integration model for dimensional and geometric inspection of prismatic parts based on the STEP-NC Standard, C. I. R. Jaimes, R. Bonnard (Universidade de 15:10 1657 MECH78 Brasília), J. C. E. Ferreira (Universidade Federal de Santa Catarina), A. Alvares (Universidade de Brasília) GD&T techniques application and analysis using MCOSMOS, J. Quirino, J. Silva, J. C. 15:30 1729 MECH79 de Lima Jr, M. Fideles (Universidade Federal da Paraíba)

70 ORAL SESSION MON / 4 NMMS - Nano and Microfluidic and Micro-Systems (Room 4 - Bldg. 3 / Laranja) TIME CODE Heat and Mass Transfer in Micro and Nano scales Experimental and inverse analysis of micro-reactors for biodiesel synthesis integrated 8:30 Invited with micro-heat exchangers for reuse of waste heat, C. P. N. Cotta (Universidade Federal do Rio de Janeiro) Analysis of the thermal performance of a brass micro heat pipe array, I. L. S. S. Júnior 9:10 0536 NMMS1 (Escola de Engenharia de São Carlos), C. Tibiriçá (Universidade de São Paulo) Experimental and numerical study of a micro heat exchanger, B. Gomes, J. Copetti 9:30 0752 NMMS2 (Universidade do Vale do Rio dos Sinos) Analysis of the refrigeration capacity of silver nanofluids, R. Fragelli, L. Sanchez, V. L. 9:50 1672 NMMS3 Scalon, R. Ingraci, F. Pontes (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) 10:10 Coffee-break TIME CODE MEMS, NEMS and NOEMS; Micro and Nanofabrication; Micro and Nanofluidics Experimental evaluation of thermal instabilities during flow boiling of Di-water in 10:40 2141 NMMS4 microchannels having their surfaces covered with nanoparticles, T. A. Moreira, F. J. do Nascimento, G. Ribatski (Universidade de São Paulo) A study of attitude and heading determination through an EKF-based sensor fusion 11:00 1859 NMMS5 for inertial measurement units (IMUs), F. Barrera, R. Sampaio, D. Munoz, C. H. Llanos (Universidade de Brasília) Incorporation of carbon nanotubes in stainless steel 304L via mechanical alloying, P. 11:20 2075 NMMS6 Baia, C. Loayza, D. C. S. Cardoso, D. J. A. Borges, P. Assunção, E. Braga, V. Ferreira(Universidade Federal do Pará) Transport properties of nanolubricants based in polyolester refrigeration oil and 11:40 0143 NMMS7 diamond nanoparticles, D. Marcucci, L. Oliveira, E. Bandarra Filho, V. Panato (Universidade Federal de Uberlândia) Numerical simulation of nanofluids working as secondary fluid in refrigeration system - a comparison using thermophysical properties from models and measured 12:00 0826 NMMS8 experimentally, F. L. Renault, A. O. C. Gómez, E. Bandarra Filho (Universidade Federal de Uberlândia) 12:20 Lunch

71 ORAL SESSION TUE / 5 NMMS - Nano and Microfluidic and Micro-Systems (Room 4 - Bldg. 3 / Laranja) TIME CODE Micro and Nanofluidics Three-dimensional visualization of oil displacement by flexible microcapsules suspensions 8:30 0989 NMMS9 in porous media, J. R. Vimieiro Jr, M. C., D. F. do Nascimento (Pontifícia Universidade Católica do Rio de Janeiro) Tailoring flexible microcapsules for mobility control, D. F. do Nascimento, J. A. A. 8:50 1024 NMMS10 Benavides, A. M., M. Moura, M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro) Effect of wettability in immiscible displacement of oil on microfluidic porous media, J. A. A. 9:10 1027 NMMS11 Benavides, N. Lima, A. Quevedo, M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro) Photothermal conversion using graphene/water nanofluids, C. Beicker, E. Bandarra Filho 9:30 1426 NMMS12 (Universidade Federal de Uberlândia) On the crawling wave motion of nematodes under the presence of a magnetic field, S. 9:50 1613 NMMS13 Malvar, F. R. Cunha, B. Carmo (Universidade de São Paulo) 10:10 Coffee-break TIME CODE Micro and Nanofluidics Experimental analysis of nucleate boiling on nanostructured surfaces under confined 10:40 1909 NMMS14 conditions, J. M. Nunes, L. Manetti, E. M. Cardoso (Universidade Estadual Paulista Julio de Mesquita Filho) Vortex shedding computational analysis for a pin fin confined in a microchannel, P. R. 11:00 2161 NMMS15 d'Egmont, V. Z. Martins, C. P. N. Cotta, F. Duda, R. M. Cotta (Universidade Federal do Rio de Janeiro) Visualization in micromodels of oil displacement by o/w emulsions, G. B. de O. Cruz, J. A. 11:20 2726 NMMS16 A. Benavides, M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro) Experimental investigation of thermal conductivity and viscosity of insulating oil based 11:40 2787 NMMS17 diamond-nickel hybrid nanofluids, L. Oliveira, D. F. M. Pico, E. P. Bandarra Filho (Universidade Federal de Uberlândia) Evaluation of surface roughness and nanofluid concentration on the surface wettability and the wall-temperature distributions, A. Cunha (Universidade Estadual Paulista Julio de 12:00 5898 NMMS18 Mesquita Filho), I. Kiyomura (UNESP - Campus de Ilha Solteira), E. M. Cardoso (Universidade Estadual Paulista Julio de Mesquita Filho) 12:20 Lunch

72 ORAL SESSION MON / 4 ICONNE - Non-linear Phenomena (Room 9 - Bldg. 3 / Laranja) TIME CODE Analytical methods; Experimental devices The influence of the nonlinear interaction between flexural and sway-buckling on the dynamics of an axially loaded column, J. de M. P. Raimundo, P. B. Gonçalves 8:30 0137 ICONNE1 (Pontifícia Universidade Católica do Rio de Janeiro), Diego Orlando, (Universidade Estadual do Rio de Janeiro) Global dynamic analysis of a barge wind turbine using the nonlinear normal modes, 8:50 0284 ICONNE2 E. Gavassoni, P. G. Zwierzikowski (Universidade Federal do Paraná), P. B. Gonçalves (Pontifícia Universidade Católica do Rio de Janeiro) Time-varying nonlinear dynamical system analog computing co-simulation, A. 9:10 0125 ICONNE3 Bueno, R. Machado, P. Serni, A. Bueno (Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico de Aeronáutica) On simulations and an implementation of chaotic and hyperchaotic motions of Lorenz models, R. Resende (Universidade Estadual Paulista), J. M. Balthazar 9:30 0156 ICONNE4 (Instituto Tecnológico de Aeronáutica), A. M. Tusset (Universidade Tecnológica Federal do Paraná), A. Bueno, P. Serni (Universidade Estadual Paulista) On nonlinear wind tunnel aeroelastic tests and application of 0-1 test for chaos, M. Westin, R. G. A. Da Silva, A. Nabarrete, J. M. Balthazar (Instituto Tecnológico de 9:50 0201 ICONNE5 Aeronáutica), A. M. Tusset (Universidade Tecnológica Federal do Paraná), G. M. V. Ladeira (Universidade Federal de Uberlândia) 10:10 Coffee-break TIME CODE Control Systems Experimental characterization of the nonlinear characteristics of friction in 10:40 0477 ICONNE6 pneumatic actuators, R. O. Felix, M. Silveira (Universidade Estadual Paulista) Experimental study of a hydraulic engine mount with emphasis on decoupler characteristics, A. M. Tusset, B. Marin (Universidade Tecnológica Federal do 11:00 0971 ICONNE7 Paraná), F. C. Janzen (Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico de Aeronáutica), E. M. de O. Lopes, C. A. Bavastri (Universidade Federal do Paraná) Attitude control of a pendulum using two reaction wheels, J. Trentin, T. Cenale, S. 11:20 1041 ICONNE8 da Silva, J. Ribeiro (Universidade Estadual Paulista) Robust control with velocity feedback of a control moment gyroscope, D. Colón, B. A. 11:40 1628 ICONNE9 Angélico (Universidade de São Paulo) 12:00 Lunch TIME CODE Macro, micro and nano scales; Nonlinear methods A note on control in micro eletromachanical systems with hysteretic damping, D. Bassinello (Instituto Federal do Paraná), A. M. Tusset, R. T. Rocha (Universidade 13:30 0609 ICONNE10 Tecnológica Federal do Paraná), J. Lima (Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico de Aeronáutica) Stochastic analysis of 1-DOF vehicle suspension system employing asymmetrical 13:50 0150 ICONNE11 damping, J. C. M. Fernandes, M. Silveira (Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico de Aeronáutica) Three-dimensional static behavior of risers submitted to traction and torsional 14:10 0223 ICONNE12 loads at the top, S. Granados, J. Avila (Universidade Federal do ABC) Determination of an artificial base accelerogram compatible with a national code for 14:30 0243 ICONNE13 seismic analysis of a shear building model, R. Brito (Universidade de São Paulo), R. Brasil (Universidade Federal do ABC) Revisiting nonlinear dynamic behavior of morphing wings with spanwise telescopic 14:50 0460 ICONNE14 composite structure, H. L. Lebkuchen, A. Nabarrete, J. M. Balthazar, R. G. A. da Silva (Instituto Tecnológico de Aeronáutica) Evaluation of impact models for body-to-barrier collisions, A. Mereles, M. Varanis, A. 15:10 1061 ICONNE15 Silva (Universidade Federal da Grande Dourados), J. M.Balthazar (Instituto Tecnológico de Aeronáutica), R. Pederiva (Universidade Estadual de Campinas) Using the tether solution for orbital maneuverings of spacecrafts, J. M. Nascimento, 15:30 1037 ICONNE16 A. F. B. A. Prado (Instituto Nacional de Pesquisas Espaciais)

73 ORAL SESSION TUE / 5 ICONNE - Non-linear Phenomena (Room 9 – Bldg. 3 / Laranja) TIME CODE Nonlinear methods Nonlinear dynamics of micro and nano systems for superior devices, M. I. Younis 8:30 Invited (State University of New York at Binghamton, USA) Non-ideal magnetopiezoelastic energy harvesting with nonlinear piezoelectric coupling, I. Iliuk (Universidade Tecnológica Federal do Paraná), J. M. Balthazar 9:10 1380 ICONNE17 (Instituto Tecnológico de Aeronáutica), R. Brasil (Universidade Federal do ABC), A. M. Tusset (Universidade Tecnológica Federal do Paraná), J. Piqueira (Universidade de São Paulo) On the nonlinear dynamics of a bi-stable piezoelectric energy harvesting device, A. 9:30 1570 ICONNE18 B. da C. Junior, V. Lopes, J. Peterson (Universidade Estadual do Rio de Janeiro) Generalized q-distributions in reliability modeling, J. V. S. Novo, S. A. B. V. de Melo 9:50 1652 ICONNE19 (Universidade Federal da Bahia), Edilson Assis (Universidade Católica do Salvador) 10:10 Coffee-break TIME CODE Nonlinear methods Identification of nonlinear system using evolutionary differential and grey wolf 10:40 2029 ICONNE20 optimizer, J. L. de Oliveira, M. Bergamini , M. Bonfim, G. Leandro (Universidade Federal do Paraná) Reliability analysis by dynamic fault trees - a case study in sewage treatment 11:00 2054 ICONNE21 systems, C. L. S. F. Filho, E. Assis, L. Silva, A. L. L. B.Costa (Universidade Católica do Salvador) Integral transform analysis of a simple alcoholic fermentation model, H. Serrano, L. 11:20 2822 ICONNE22 A. Sphaier, I. F. Pinheiro, F. Peixoto (Universidade Federal Fluminense) Sommerfeld effect in a cantilever beam with double non-ideal sources, A. Kossoski, A. M. Tusset, G. Santos, R. T. Rocha (Universidade Tecnológica Federal do Paraná), 11:40 5233 ICONNE23 F. C. Janzen (Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico de Aeronáutica) 12:00 Lunch TIME CODE Numerical methods Nonlinear dynamics of an energy harvesting embarked pendulum, R. Brasil, P. E. 13:30 0103 ICONNE24 Santos (Universidade Federal do ABC) Control of rotating machines bases resonance by means axial force, E. Padua, R. 13:50 0119 ICONNE25 Brasil (Universidade Federal do ABC) Energy harvesting by applying a hysteretic damped NES device into a portal frame platform of two-degrees-of-freedom, R. T. Rocha (Universidade Tecnológica Federal 14:10 0175 ICONNE26 do Paraná), J. M. Balthazar (Instituto Tecnológico de Aeronáutica), A. M. Tusset (Universidade Tecnológica Federal do Paraná), F. C. Janzen (Universidade Estadual Paulista) A note on OLFC control applied in a parametrically excited pendulum, A. M. Tusset, B. Marin, R. T. Rocha (Universidade Tecnológica Federal do Paraná), F. C. Janzen 14:30 0180 ICONNE27 (Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico de Aeronáutica) On a liquid tuned damper and nonlinear mass tuned damper passive application in a building to reduce high vibrations, W. B. Lenz, A. M. Tusset, R. T. Rocha 14:50 0197 ICONNE28 (Universidade Tecnológica Federal do Paraná), F. C. Janzen (Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico de Aeronáutica) Revisiting the dual-spin spacecraft dynamics during plat-form spin-up with limited torque supply, J. M. Balthazar, E. Cereja, A. Nabarrete (Instituto Tecnológico de 15:10 0256 ICONNE29 Aeronáutica), A. M. Tusset, R. T. Rocha (Universidade Tecnológica Federal do Paraná), J. L. P. Felix (Universidade Federal da Fronteira Sul), R. Brasil (Universidade Federal do ABC) Optimal control applied in slewing control for a flexible structure, G. P. dos Santos, A. M. Tusset, R. T. Rocha (Universidade Tecnológica Federal do Paraná), F. C. 15:30 0289 ICONNE30 Janzen (Universidade Estadual Paulista), J. M.Balthazar (Instituto Tecnológico de Aeronáutica)

74 ORAL SESSION WED / 6 ICONNE - Non-linear Phenomena (Room 9 - Bldg. 3 / Laranja) TIME CODE Numerical methods Dynamic modeling, flight control and trajectory planning for a balloon-hexacopter, 8:30 0587 ICONNE31 D. A. dos Santos, R. Afonso (Instituto Tecnológico de Aeronáutica) Largest Lyapunov exponent and attractors applied to stability study of nuclear 8:50 0653 ICONNE32 reactors, A. L. Costa, W. A. Coloma, C. Pereira (Universidade Federal de Minas Gerais) Dynamical analysis and control of a parametrically excited elastic pendulum, J. M. 9:10 0733 ICONNE33 Balthazar, T. C. L. Marsola, M. de F. V. Pereira (Instituto Tecnológico de Aeronáutica), A. M. Tusset (Universidade Tecnológica Federal do Paraná) Computational improvement in the evaluation of dynamic integrity with Monte 9:30 0769 ICONNE34 Carlo method, K. C. B. Benedetti, F. M. A. da Silva (Universidade Federal de Goiás), P. B. Goncalves (Pontifícia Universidade Católica do Rio de Janeiro) Analysis of restrictions on an extended time delay feedback control applied to a 9:50 0777 ICONNE35 SMA-pendulum system, D. D. A. Costa, M. Savi (Universidade Federal do Rio de Janeiro) 10:10 Coffee-break TIME CODE Numerical methods Ship drift angle analysis in unsheltered channel navigation and application of escort 10:40 0883 ICONNE36 tugs, G. Bisinotto, R. D. Barrera, E. A. Tannuri (Universidade de São Paulo) State dependence riccati equation for the training of the echo state network for control half-car system, A. M. Tusset (Universidade Tecnológica Federal do Paraná), 11:00 0963 ICONNE37 E. Moletta (Faculdades Ponta Grossa), J. Pontes, H. Siqueira (Universidade Tecnológica Federal do Paraná) A study of the errors in swing-by design by the "patched-conics" approach applied to 11:20 1369 ICONNE38 the galilean moons, R. B. Negri, A. F. B. de A. Prado (Instituto Nacional de Pesquisas Espaciais) P and T waves heart modeling with Van der Pol oscillator, G. M. V. Ladeira, G. V. Lima (Universidade Federal de Uberlândia), J. M. Balthazar (Instituto Tecnológico 11:40 1151 ICONNE39 de Aeronáutica), A. M. Tusset (Universidade Tecnológica Federal do Paraná), A. Bueno (Universidade Estadual Paulista) 12:00 Lunch TIME CODE Numerical methods Numerical simulation of welding residual stress and the effect on frequency 13:30 1299 ICONNE40 variations, V. Macanhan (Laboratório Nacional de Astrofísica), E. Correa (Universidade Federal de Itajubá), M. Arruda (Laboratório Nacional de Astrofísica) A numerical-experimental methodology to characterize thermoplastic materials 13:50 1329 ICONNE41 submitted to large strains, N. M. Castoldi, F. L. Bresolin, J. Vassoler (Universidade Federal do Rio Grande do Sul) Bayesian dynamic model updating using markov chain Monte Carlo methods, R. B. 14:10 1646 ICONNE42 Macedo, A. Nabarrete, J. A.Hernandes (Instituto Tecnológico de Aeronáutica) Numerical investigation an energy harvesting system by fractional damping, M. Varanis (Universidade Federal da Grande Dourados), R. T. Rocha, A. M. Tusset 14:30 2018 ICONNE43 (Universidade Tecnológica Federal do Paraná), J. M. Balthazar (Instituto Tecnológico de Aeronáutica), C. Oliveira, P. Brunetto (Universidade Federal da Grande Dourados) A comparison of two numerical algorithms for computing optimal low-thrust 14:50 2598 ICONNE44 trajectories, F. das C. Carvalho, S. da Silva Fernandes (Instituto Tecnológico de Aeronáutica), J. V. B. Romão (Universidade de São Paulo) 15:10 -- -- 15:30 -- --

75 ORAL SESSION MON / 4 OSPE - Offshore and Petroleum Engineering (Room 8 - Bldg. 3 / Laranja) TIME CODE Offshore and Petroleum Engineering Reducing life-cycle costs and improving the energy efficiency of large floating 8:30 Invited production platforms J. A. Ferrari Jr (Shell/Brazil) Wind loads on the topside of a FLNG vessel: wind tunnel model tests, G. Nader (Universidade de São Paulo), P. J. S. Jabardo (Instituto de Pesquisa Tecnológica do 9:10 0087 OSPE1 Estado de São Paulo), G. B. Martins (Universidade de São Paulo), G. Rosetti (Argonáutica Engenharia e Pesquisas), K. Nishimoto (Universidade de São Paulo) Selection process of an offshore petroleum production system that accounts 9:30 0419 OSPE2 technical, technological, economic, environmental and logistic attributes, L. J. G. Castaño, C. Morooka (Universidade Estadual de Campinas) An experimental study on the structural behavior of a flexible pipe under axial compressive loads using digital image correlation, R. de A. Amarante, C. P. Pesce, R. 9:50 2875 OSPE3 Ramos Jr. (Universidade de São Paulo), R.l Santiago (Universidade Federal do ABC), J. R. M. de Sousa (Universidade Federal do Rio de Janeiro), M. A. Rabelo (Universidade Federal de Santa Catarina) 10:10 Coffee-break TIME CODE Offshore and Petroleum Engineering Transient mathematical model for kick detection, J. Galdino, G. M. de Oliveira, A. 10:40 0649 OSPE4 Franco, C. O. R. Negrao (Universidade Tecnológica Federal do Paraná) Simulation of macro-emulsion flow in stratified reservoirs considering capillary 11:00 0716 OSPE5 effects, R. V. Ponce F., H. Lima, M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro) Flow rate effect on polymer reversible retention in sandstone, V. H. S. Ferreira, R. 11:20 0896 OSPE5 Moreno (Universidade Estadual de Campinas) Experimental image analisys of gas bubbles path line in centrifugal pump impeller, J. 11:40 0982 OSPE6 L. Biazussi, R. Perissinotto, J. Saturnino, W. M. Verde, M. S. de Castro, A. Bannwart (Universidade Estadual de Campinas) 12:00 Lunch TIME CODE Offshore and Petroleum Engineering; Piping and Pressure Vessels Analysis of accident in drilling and production land rigs, J. Araújo (Instituto Federal 13:30 1101 OSPE7 de Alagoas), R. da S. Magalhães (Universidade Federal do Sul da Bahia), L. Santos (Instituto Federal de Alagoas), M. C. Rodrigues (Universidade Federal da Paraíba) Fully submerged point absorber in Santa Catarina, Brazil - a feasibility study, L. S. P. da Silva (Universidade de São Paulo), T. P. Tancredi (Universidade Federal de Santa 13:50 1253 OSPE8 Catarina), N. Sergiienko (University of Adelaide), H. M. Morishita (Universidade de São Paulo) Hydrate phase equilibrium using water-based drilling fluid, C. Kakitani, J. Karp, D. C. 14:10 1596 OSPE9 Marques, L. Rossi, R. Morales, A. Sum (Universidade Tecnológica Federal do Paraná) Sea conditions influence on solar energy harvesting, E. A. da Silva Jr., I. Lache 14:30 2006 OSPE10 (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Characterization of pressure drop and velocity field in a gas-liquid cyclone separator, 14:50 2270 OSPE11 G. E. O. Celis, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de Janeiro) Dynamic response analysis of steel catenary riser under the influence of an internal 15:10 0601 OSPE12 slug flow, J. Meléndez (Instituto Nacional de Pesquisas Espaciais), J. Avila (Universidade Federal do ABC) Structural thermal transient numerical analysis of residual stresses in cylindrical pressure vessels submitted to weld repair according to standard ASME PCC-2-2015, J. 15:30 1916 PIPV1 Almeida (Universidade Federal da Bahia), M. C. Rodrigues (Universidade Federal da Paraíba)

76 ORAL SESSION THU / 7 PROD - Product Engineering (Room 9 - Bldg. 3 / Laranja) TIME CODE Product Engineering Servitization methodology: A case of a medical equipment manufacturer from 8:30 Invited product offering to service provider, H. Rozenfeld (Universidade de São Paulo) Development of a topology optimization method for tailored forming multi-material 9:10 0079 PROD1 design, R. da S. de Siqueira, R. Lachmayer, I. Mozgova (Leibniz Universität Hannover, Germany) Simulation of uniaxial tensile test through of finite element method, J. P. Baltar, C. 9:30 0200 PROD2 Carvalho (Centro Universitário Salesiano de São Paulo) Numerical and experimental analysis of FRF's of structural composite materials, C. 9:50 2704 PROD3 Silva, A. Diacenco (Centro Universitário de Itajubá) 10:10 Coffee-break TIME CODE Product Engineering Development and validation of design tool for concept choice on robustness, 10:40 0406 PROD4 reliability and safety criteria, V. Marini (Technical University of Denmark, Denmark) Development of a wrist-hand orthosis for children with neurological and motors disabilities: conceptual design and mock-up, P. Kaneko, A. M. Souza, D. Kemmoku, 11:00 0485 PROD5 L. Nascimento, G. B. Schiavon, F. H. Moro, Z. C. Silveira, L. Gerez (Universidade de São Paulo) Conceptual design of an adsorption refrigeration system using exhaust gases in 11:20 1071 PROD6 trucks, J. C. A. Merino (Universidad Peruana de Ciencias Aplicadas, Peru), K. Hatakeyama (ABCM) Weight reduction through an increase in material efficiency, F. Resende, A. 11:40 1159 PROD7 Bracarense (Universidade Federal de Minas Gerais), R. Gibbs (Fiat Chrysler Automobiles) 12:00 Lunch TIME CODE Product Engineering Design of active suspension mechanism, F. Malvezzi (Instituto Mauá de Tecnologia), 13:30 1243 PROD8 J. V. D. Colatto (BRAVE - Brasil Eletric Vehicles), R. Pellicci, M. F. de Macedo, F. T. Monteiro (Mauá Institute of Technology) Foucault brake for bench small scale applications: design and evaluation, F. MICCO, 13:50 1429 PROD9 P. S. Schneider (Universidade Federal do Rio Grande do Sul), C. Rech (Centro Universitário La Salle) Application of taguchi's loss function and signal-to-noise ratio, L. Lamy, A. C. Neto 14:10 1497 PROD10 (Universidade Federal do Paraná) An innovative methodology for toggle clamping device design, M. V. de O. e Costa, 14:30 0333 PROD11 E. H. Murai , F. da S. Rosa, D. Martins (Universidade Federal de Santa Catarina) Conceptual design of a palletizing machine for microbreweries, L. M. de O. da Costa 14:50 5941 PROD12 (Instituto Federal de Educação, Ciência e Tecnologia Fluminense), A. Pertence (Universidade Federal de Minas Gerais) 15:10 ------15:30 ------

77 ORAL SESSION TUE / 5 QUSM - Quantification of Uncertainty and Stochastic Modeling (Room 8 - Bldg. 3 / Laranja) TIME CODE Quantification of Uncertainty and Stochastic Modeling Global optimization based on metamodels using radial basis function with 8:30 0248 QUSM1 application to aircraft wings, N. Diaz, N. Manzanares Filho, E. da Silva (Universidade Federal de Itajubá) Parameters identification with evaluation of uncertainties using sensitivity method 8:50 0263 QUSM2 and covariance matrix analysis, A. Löw, H. Gomes, E. Costamilan (Universidade Federal do Rio Grande do Sul) Stochastic torsional vibration analysis of a vertical drill-string in the transition 9:10 0341 QUSM3 between two rock layers, D. de M. Lobo, T. Ritto, D. Castello (Universidade Federal do Rio de Janeiro) Uncertainty analysis on stability of a rigid rotor with hydrodynamic bearings, L. B. 9:30 0359 QUSM4 Visnadi, H. F. de Castro (Universidade Estadual de Campinas) Uncertainty compensation in damage identification by means of the approximation 9:50 0363 QUSM5 error approach, G. L. S. da Silva, D. Castello, L. M. A. Borges (Universidade Federal do Rio de Janeiro) 10:10 Coffee-break TIME CODE Quantification of Uncertainty and Stochastic Modeling Flexural wave propagation in slowly varying thin plate strip using a finite element 10:40 0819 QUSM6 approach, A. T. Fabro (Universidade de Brasília), N. Ferguson (University of Southampton), B. Mace (University of Auckland) Reliability based design optimization using fuzzy logic, A. Dourado, F. Lobato, A. A. 11:00 1335 QUSM7 Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) Quantification of material uncertainties in modal analysis of a plate using a 11:20 1525 QUSM8 gaussian process and finite element method, T. H. G. Lobato, R. G. da Fonseca, N. Soeiro (Universidade Federal do Pará) Gas flow measurement under high pressure flowing conditions: analysis of the 11:40 1606 QUSM9 uncertainty of the reported measurement at standard conditions, M. Mosckem, M. Coelho, R. Ramos (Universidade Federal do Espírito Santo) 12:00 Lunch TIME CODE Quantification of Uncertainty and Stochastic Modeling Analysis of a flexible rotating shaft supported by hydrodynamic bearings considering uncertainties, L. R. de S. Queiroz, R. A. Borges (Universidade Federal de Goiás), A. 13:30 1887 QUSM10 A. Cavalini Jr (Universidade Federal de Uberlândia), V. Steffen Jr (Universidade Federal de Uberlândia) Structural reliability analysis with polynomial expansion, E. Medeiros, A. Torii 13:50 1923 QUSM11 (Universidade Federal da Paraíba) Petri net based reliability analysis of thermoelectric plant cooling tower, A. Melani, G. 14:10 2203 QUSM12 F. M. de Souza, C. A. Murad, A. Caminada Netto, S. I. Nabeta (Universidade de São Paulo) Statistical calibration of 2DOF vortex-induced vibration phenomenological model, G. 14:30 2478 QUSM13 M. G. Bernadá, F. Rochinha (Universidade Federal do Rio de Janeiro) Applying the Monte Carlo λ-Neumann model to stochastic reaction-diffusion 14:50 2894 QUSM14 problems, R. M. F. Squarcio (Universidade Tecnológica Federal do Paraná) 15:10 ------15:30 ------

78 ORAL SESSION WED / 6 SMST - Smart Materials and Structures (Room 10 - Bldg. 3 / Laranja) TIME CODE Smart Materials and Structures Nonlinear dynamics of a rotating system considering contact with a shape memory 13:30 0434 SMST1 alloy coated stator, R. V. Moreira, A. Paiva (Universidade Federal Fluminense) Thermo-mechanical behaviour of coiled monofilament polymer fibers, S. S. Mendes, 13:50 0629 SMST2 L. Nunes (Universidade Federal Fluminense) Analysis of piezoelectric sensor networks for spatial modal filters and active vibration 14:10 0838 SMST3 control, F. Horiy, A. Shigueoka, M. A. Trindade (Universidade de São Paulo) Robust design and uncertainty analysis of an energy harvesting resonant device, P. 14:30 0881 SMST4 Martins (Universidade de São Paulo), M. A. Trindade (Escola de Engenharia de São Carlos) The influence of heat treatments on NiTi springs hysteresis loop, H. de S. Oliveira, S. 14:50 0995 SMST5 A. Bandeira, A. S. de Paula (Universidade de Brasília) Experimental verification of the self-powered active control of aeroelastic oscillations 15:10 1180 SMST6 using piezoelectric material, D. D'Assunção (Universidade de São Paulo) 15:30 ------

79 ORAL SESSION THU / 7 SMST - Smart Materials and Structures (Room 10 - Bldg. 3 / Laranja) TIME CODE Smart Materials and Structures Combining shape memory alloy wire actuators with permanent magnets for a multi- 8:30 1416 SMST8 stable smart structure, T. de P. Sales (Universidade Federal de Uberlândia), D. Rade (Instituto Tecnológico de Aeronáutica), D. Inman (University of Michigan, USA) Outlier identification in impedance-based SHM, B. P. Barella, S. W. Rezende, J. P. M. 8:50 1487 SMST9 Bento, J. R. V. de Moura Jr (Universidade Federal de Goiás) Probability of damage in structures by the use of Lamb Waves and RAPID algorithm, 9:10 1498 SMST10 S. W. Rezende, B. P. Barella, J. P. M. Bento, J. R. V. Moura Jr (Universidade Federal de Goiás) Vibration control using multiple piezoelectric absorbers, J. A. B. Gripp, D. Rade 9:30 1513 SMST11 (Instituto Tecnológico de Aeronáutica) Nonlinear dynamics and chaos of a SMA-Hybrid composite oscillator, L. Vignoli (Universidade Federal do Rio de Janeiro), F. Rodrigues (Universidade Federal do 9:50 1526 SMST12 Rio Grande do Norte), M. Savi (Universidade Federal do Rio de Janeiro), W. M. Bessa (Universidade Federal do Rio Grande do Norte) 10:10 Coffee-break TIME CODE Smart Materials and Structures Nonlinear dynamics of non-smooth piezoelectric energy harvesting system, L. L. da S. Monteiro, R. Ai (Centro Federal de Educação Tecnológica Celso Suckow da 10:40 1546 SMST13 Fonseca), M. Savi, P. C. da C. Monteiro Jr (Universidade Federal do Rio de Janeiro), B. T. Duarte, P. M. C. L. Pacheco (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Real-time structural health monitoring method based on the electromechanical 11:00 1890 SMST14 impedance approach applied on concrete structures, R. N. F. Silva, K. M. Tsuruta, R. M. Finzi Neto, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia) Experimental analysis of an energy harvesting system with piezoelectric and shape memory alloy elements, A. Adeodato, B. T. Duarte, R. A. A. de Aguiar, L. L. da S. 11:20 1912 SMST15 Monteiro (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), M. Savi (Universidade Federal do Rio de Janeiro), P. M. C. L. Pacheco (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Finite element analysis of a shape memory alloy honeycomb vibration absorber, G. G. Averbug, P. M. C. L. Pacheco, R. A. A. de Aguiar (Centro Federal de Educação 11:40 1917 SMST16 Tecnológica Celso Suckow da Fonseca), M. Savi (Universidade Federal do Rio de Janeiro), A. C. R. Rapozo (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) 12:00 Lunch TIME CODE Smart Materials and Structures Gust load alleviation in a smart idealized wing, T. Versiani, F. Silvestre, A. B. 13:30 2047 SMST17 Guimarães Neto, D. Rade, R. G. A. da Silva, R. Bertolin, G. Silva, P. Gonzalez (Instituto Tecnológico de Aeronáutica) Dynamics of a self-folding cylindrical system actuated by SMA, G. V. Rodrigues, L. 13:50 2655 SMST19 Fonseca, M. Savi (Universidade Federal do Rio de Janeiro), A. Paiva (Universidade Federal Fluminense) Piezoelectric energy harvest generator under different application of loads, L. A. O. Araujo (Universidade Federal de São Carlos), C. Fortulan (Universidade de São 14:10 2878 SMST19 Paulo), C. Foschini (Universidade Estadual Paulista Julio de Mesquita Filho), S. J. de Moraes Filho (Universidade Federal de São Carlos) Inferring superelasticity parameters of NiTi SMA from instrumented indentation data, 14:30 2898 SMST20 F. F. R. Pereira (University of Cambridge, UK) Evaluation of adhesives used on e/m impedance method applied in shaft under 14:50 5394 SMST21 fatigue tests, K. M. Tsuruta, C. Guimarães, D. de S. Rabelo, A. A. Cavalini Jr, R. M. Finzi Neto, V. Steffen Jr (Universidade Federal de Uberlândia) 15:10 ------15:30 ------

80 ORAL SESSION MON / 4 SOLM - Solid Mechanics (Room 10 - Bldg. 3 / Laranja) TIME CODE Structural Statics and Dynamics Enriched modified local green’s function method applied to elasto elastic problems, M. P. da Silva (Pontifícia Universidade Católica do Paraná), R. D. Machado 8:30 0092 SOLM1 (Universidade Federal do Paraná), J. E. Abdalla Filho, Y. S. Hsu (Pontifícia Universidade Católica do Paraná) Structural evaluation of ergometric equipment available by the project open-air 8:50 0372 SOLM2 academies in public squares, C. Vimieiro (Universidade Federal de Minas Gerais) Wear analysis of a plunger of diesel injection pump combining experimental test and 9:10 0412 SOLM3 finite element simulation, J. G. Farias (Robert Bosch Ltda.), Marco A. Luersen, C. H. Silva (Universidade Tecnológica Federal do Paraná) Energy balance approach to analyze crankshaft deep rolling simulation results, L. 9:30 0606 SOLM4 Fonseca, A. Faria (Instituto Tecnológico de Aeronáutica) A first study on hybrid-mixed stress formulation on topology optimization, L. A. P. 9:50 0702 SOLM5 Navarro, W. Góis (Universidade Federal do ABC) 10:10 Coffee-break TIME CODE Structural Statics and Dynamics A lower bound limit analysis of reissner-mindlin plates by finite element and second- 10:40 1069 SOLM6 order cone programming, E. L. B. Cavalcante, P. I. B. de Queiroz, E. L. Neto (Instituto Tecnológico de Aeronáutica) Nanotechnology for personal protection systems: the new nano-modified bullet 11:00 1124 SOLM7 proof vest development, A. Avila, A. Oliveira, S. G. Leão, F. L. R. de M. Lima, G. Arantes, M. G. M. Martins, M. N. Mello (Universidade Federal de Minas Gerais) The discrete element method (DEM) applied to dynamic soil-structure interaction, E. 11:20 1321 SOLM8 MESQUITA, M. A. Di G. Nery (Universidade Estadual de Campinas) Strain energy and smart mesh refinement in topology optimization of composite microstructures, P. H. A. Bezerra (Universidade Federal do Rio Grande do Norte), D. 11:40 1349 SOLM9 Junior(Universidade Federal Rural do Semi-Arido), J. C. A. C. Júnior(Universidade Federal do Rio Grande do Norte) 12:00 Lunch TIME CODE Structural Statics and Dynamics Topology optimization of bi-dimensional composite structures under thermomechanical loads, P. H. A. Bezerra (Universidade Federal do Rio Grande do 13:30 1351 SOLM10 Norte), D. Junior (Universidade Federal Rural do Semi-Arido), J. C. A. Costa Jr (Universidade Federal do Rio Grande do Norte) Numerical analysis of GFRP poles, P. Santos, C. A. Cimini Jr (Universidade Federal 13:50 1383 SOLM11 de Minas Gerais) Numerical evaluation of local buckling coefficients of “S” stiffened profiles with sloped 14:10 1384 SOLM12 web, P. Santos, L. M. de Freitas, M. F. Brandão, F. Rodrigues (Universidade Federal de Minas Gerais) Thermoelastic topology optimization with multiple materials for maximum stiffness 14:30 1524 SOLM13 using material interpolation scheme with penalization, L. A. Jaimes, R. Pavanello, W. Vicente (Universidade Estadual de Campinas) Dynamic response of Timoshenko beams on Pasternak Foudation, L. Soares, W. K. 14:50 1571 SOLM14 da S. Bezerra, S. dos S. Hoefel (Universidade Federal do Piauí) Dynamic analysis of a viscoelastic Timoshenko beam, A. S. da C. Azevêdo, S. dos S. 15:10 1604 SOLM15 Hoefel (Universidade Federal do Piauí) Free vibration analysis for Euler-Bernoulli beam on Pasternak foundation, W. 15:30 1084 SOLM16 Bezerra, L. Soares, S. S. Hoefel (Universidade Federal do Piauí)

81 ORAL SESSION TUE / 5 SOLM - Solid Mechanics (Room 10 - Bldg. 3 / Laranja) TIME CODE Structural Statics and Dynamics Numerical experimental analysis of a wind blade from Verne 555 wind turbine 8:30 1820 SOLM16 model, A. de Morais, D. Araujo, M. A. M. Shzu, M. V. G. de Morais, S. Avila (Universidade de Brasília) Dimensioning of the frontal suspension system of the double-A type through topological analysis, D. S. de F. e Silva, T. Ferreira (Instituto Federal de Minas 8:50 1986 SOLM17 Gerais), T. Moreira (Centro Federal de Educação Tecnológica de Minas Gerais), G. Melchiades, L. Ferreira (Instituto Federal de Minas Gerais) On the damage evolution of reinforced concrete I-beam bridges due to dynamic 9:10 2390 SOLM18 vehicle-structure interaction, A. Imai, T. Abeche, R. D. Machado (Universidade Federal do Paraná) Structural topology optimization of a fluid-structure system, J. B. D. Moreira, E. M. 9:30 2404 SOLM19 Cesconeto, E. Lisboa, F. Link, W. J. P. Casas (Universidade Federal do Rio Grande do Sul) Recursive methodology applied to determination of semi-analytical solution of 9:50 2431 SOLM20 anisotropic thick plates in linear bending, T. de V. Lisbôa, R. Marczak (Universidade Federal do Rio Grande do Sul) 10:10 Coffee-break TIME CODE Structural Statics and Dynamics A metamodel for the maximum stress of metal lugs, J. P. Pesci, J. A. Hernandes 10:40 2436 SOLM21 (Instituto Tecnológico de Aeronáutica), E. Magalhaes (Embraer) A note on elastoplastic residual stresses in composite beams, P. P. Kenedi (Centro 11:00 2440 SOLM22 Federal de Educação Tecnológica Celso Suckow da Fonseca), L. Vignoli (Universidade Federal do Rio de Janeiro) Sizing optimization of truss structures under time-dependent stress constraints using 11:20 2465 SOLM23 the equivalent static loads method, R. B. Santos, A. Pereira (Pontifícia Universidade Católica do Rio de Janeiro) Evolution in analysis of a formula SAE chassis using finite element method, Menezes 11:40 2472 SOLM24 Miguel, Victor Belote, Gustavo Storti, Carlos Alberto Alves Viana, Rafael Marques, Amarildo Tabone Paschoalini (Universidade Estadual Paulista) 12:00 Lunch TIME CODE Structural Statics and Dynamics Practical approach to stress and displacement calculation of a clamp fixture for quick 13:30 2736 SOLM25 openings of pressure vessels, V. E. Beal, M. Araújo, J. Oliveira (SENAI CIMATEC) The development of a race car monocoque, G. Gonçalves, L. F. Perucci, R. Marchi 13:50 2778 SOLM26 (Universidade de São Paulo) Test bench for experimental study of the geometric stiffness in vibration of beams as support of rotating machines, A. de M. Wahrhaftig (Universidade Federal da Bahia), 14:10 2821 SOLM27 R. Brasil (Universidade Federal do ABC), G. S. C. Cordeiro (Universidade Federal da Bahia) Analysis of composite and functionally graded plates behaviour concerning to 14:30 5513 SOLM28 buckling, J. Moita (IDMEC - Instituto Superior Técnico. Universidade de Lisboa - Portugal), C. M. M. Soares, J. Herskovits (Universidade Federal do Rio de Janeiro) Stress analysis of a diffusion bonding device under loading and thermal expansion, 14:50 5949 SOLM29 G. S. C. Vieira, G. Nuernberg, N. Y. L. Pabon, Marcia Mantelli (Universidade Federal de Santa Catarina) 15:10 ------15:30 ------

82 ORAL SESSION WED / 6 SOLM - Solid Mechanics (Room 10 - Bldg. 3 / Laranja) TIME CODE Constitutive Models Algebraic multigrid via wavelet applied to advection-diffusion problem, F. Fagundes, 8:30 0112 SOLM30 R. D. Machado, V. Mariani (Pontifícia Universidade Católica do Paraná) Use of green composites for manufacturing of small size boats in the amazon: numerical and experimental evaluations – part II, M. F. Carvalho, L. D. Rodrigues, J. 8:50 1197 SOLM31 C. Valente, J. A. F. Raiol, M. Xavier, L. P. B. de Souza, F. R. B. da Silva (Universidade Federal do Pará) Study of a laminated composite under simple shear, M. C. de O. Telles, C. S. 9:10 1634 SOLM32 Moreira, S. S. Mendes, R. P. Faria, M. C. de O. Telles, L. Nunes (Universidade Federal Fluminense) Stresses measurements in simple shear test for a polymer under large deformations, F. Araújo (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), C. 9:30 1799 SOLM33 S. Moreira (Universidade Federal Fluminense), O. L. de M. Filho (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), N. Brilhante, L. Nunes (Universidade Federal Fluminense) A critical analysis on the complex modulus provided by DMA, I. R. Henriques, L. M. 9:50 1018 SOLM34 A. Borges, D. Castello, B. G. Soares, M. Costa (Universidade Federal do Rio de Janeiro) 10:10 Coffee-break TIME CODE Failure Criteria Structural analysis of beams under alternating axial loading, G. Duran (Universidade 10:40 0228 SOLM34 de São Paulo), W. M. M. Filho (Centro Universitário da FEI) Fatigue design of sintered connecting rod applied to reciprocating compressor, F. 11:00 1352 SOLM35 Lima (Embraco), R. Barbieri (Universidade do Estado de Santa Catarina) 11:20 ------11:40 ------12:00 Lunch

83 DETAILED PROGRAM - POSTER SESSION (DAY/AREA)

POSTER SESSION MON / 4 AERO – Aerospace Engineering CODE Aerodynamics Viscous Effects Assessment Through Nonlinear Lifting-Line Theory, J. R. Chreim (Universidade 0568 P-AERO1 de São Paulo), J. L. D. Dantas (Instituto de Pesquisa Tecnológica do Estado de São Paulo), K. P. Burr (Universidade Federal do ABC), M. Pimenta (Universidade de São Paulo) Preliminary design of a device to perform roll cycle limit oscillations and wing rock 1467 P-AERO2 phenomenon in low-subsonic wind tunnel, H. L. Lebkuchen, R. G. A. da Silva (Instituto Tecnológico de Aeronáutica) Method of volumes and finite discretization strategies applied the aerodynamic profiles, M. L. 1470 P-AERO3 de A. Gemaque, L. Coelho, M. dos S. Viana, E. Lins (Universidade Federal do Pará) A simplified model for the aerodynamic analysis of a small propeller, C. Rosolen, K. Ismail 2581 P-AERO4 (Universidade Estadual de Campinas) Numerical analysis of an Aerodesign wing using Vortex Lattice Method and Finite Volume 2724 P-AERO5 Method, J. G. de Oliveira Junior, L. M. C. Ferro (Universidade Federal Rural do Semi-Arido) Application of Galerkin method to the solution of aerodynamic models based on the lifting- 2863 P-AERO6 line theory, F. Liorbano, L. Pelegrineli, R. A. Angélico (Universidade de São Paulo) Implementation of a Jacobian-free method for the instability analysis of a compressible flow 2889 P-AERO7 over an open cavity, M. S. Mathias, M. Medeiros (Universidade de São Paulo), V. Theofilis (University of Liverpool - UK, Universidade Federal Fluminense) CODE Aerospace Structures Simulation of after-impact residual strength in stiffened composite panels, L. R. H. Motta, M. 0471 P-AERO8 Donadon (Instituto Tecnológico de Aeronáutica), P. R. Z. Pasquali (Embraer) Structural Dynamic Characterization of Metallic Honeycomb Sandwich Panels for Aerospace 0547 P-AERO9 Applications, A. Domingues, A. T. Fabro, K. Sousa, M. V. G. de Morais, S. Carneiro (Universidade de Brasília) Development and production of ceramic matrix based on zirconia-titania reinforced with rare 0590 P-AERO10 earth oxide for aerospace exhaust systems, N. Gomes, R. A. S. Ferreira, Y. P. Yadava (Universidade Federal de Pernambuco) Fractographic analysis of co-bonded carbon fiber reinforced composites joints subjected to 0778 P-AERO11 mode I delamination, N. N. Silveira, R. Sales, C. Brito, G. Cândido, M. Donadon (Instituto Tecnológico de Aeronáutica) BIOE – Bioengineering CODE Biomaterials Bioactive response on Ti alloy surface induced by anodically bonded bioactive glass, E. M. 0167 P-BIOE1 Szesz, C. Lepienski (Universidade Federal do Paraná) Mechanical Properties of Ti-47Nb and Ti-30Nb-8Zr Alloys, E. Monteiro, Y. Fonseca, A. C. C. 1016 P-BIOE2 de Almeida, D. Fernandes, C. Elias (Instituto Militar de Engenharia) Lower limb prosthesis to ankle adapter manufactured in 3d printer, P. Macedo, W. Silva, D. R. 1202 P-BIOE3 R. Guilhon, F. N. Pereira (Universidade Estadual de Campinas) A Two-Dimensional Model of Cell Migration, G. S. Rosalem, E. B. de Las Casas (Universidade 1284 P-BIOE4 Federal de Minas Gerais), L. A. G. Torres (Universidade Federal dos Vales do Jequitinhonha e Mucuri) Tribological evaluation of borided TI6AL4V alloy for biomedical applications, G. Hobold, L. 1953 P-BIOE5 Guariglia, C. A. H. Laurindo, P. Soares (Pontifícia Universidade Católica) Tribocorrosion properties of titanium alloy modified by electrical discharge machining, L. 1989 P-BIOE6 Bemben, B. M. de Freitas, C. A. H. Laurindo, P. Soares (Pontifícia Universidade Católica) Analysis of mechanical properties and solubility of phosphate glasses with different additions 2430 P-BIOE7 of MgO, D. S. da L. Weiss, Paulo Soares (Pontifícia Universidade Católica do Paraná) Tribological studies of edm modified titanium surfaces, B. M. de Freitas, C. A. H. Laurindo, F. 2467 P-BIOE8 L. Amorim, Paulo Soares (Pontifícia Universidade Católica) Microstructural and mechanical characterization of the Ti-25Ta-25Nb alloy for biomedical 2693 P-BIOE9 applications, A. Pereira Jr, Ana P. R. A. Claro (Universidade Estadual Paulista Julio de Mesquita Filho) Surface modification of the Ti7,5Mo alloy by anodic oxidation and incorporation of 2700 P-BIOE10 calcium/phosphate, F. Mello (Universidade Estadual Paulista Julio de Mesquita Filho) Ti30Ta alloy fatigue strength after alkaline and heat treatment – Biomedical applications, K. 2713 P-BIOE11 B. da Silva, A. P. R. A. Claro, V. Guimarães (Universidade Estadual Paulista Julio de Mesquita Filho)

84 POSTER SESSION (CONT.) – MON / 4 Production of polymeric nanocomposite powder for tissue engineering application, R. Moretto, T. Santana, M. Meruvia, C. Marcondes (Pontifícia Universidade Católica do 2890 P-BIOE12 Paraná), D. C. Potulski (Universidade Federal do Paraná), L. Viana (Universidade Federal de Tocantins), G. I. B. de Muniz (Universidade Federal do Paraná) Tribo-mechanical behavior of Ti-25Nb AND Ti-25Nb-25Ta due the addition of beta stabilizers elements, A. da Luz, G. Beilner, C. Siqueira (Universidade Federal do Paraná), G. de Souza 2922 P-BIOE13 (Universidade Estadual de Ponta Grossa), C. Lepienski, J. N. Athayde (Universidade Federal do Paraná), A. P. R. Alves. Claro (Universidade Estadual Paulista), N. Kuromoto (Universidade Federal do Paraná) Characterization of the Ti25Ta25Nb3Sn experimental quaternary alloy after aging heat 5490 P-BIOE14 treatment, C. Bortolini Jr, A. P. R. A. Claro, L. Rafael, G. Hilsdorf (Universidade Estadual Paulista) CODE Medical devices Classification of EEG Signals using Genetic Programming, F. Lopes, M. A. Meggiolaro 1839 P-BIOE15 (Pontifícia Universidade Católica do Rio de Janeiro) Electromechanical Impedance Method Applied in a Silicone Rubber Model, G. L. Menegaz, K. 1710 P-BIOE16 M. Tsuruta, G. Guimaraes, R. M. F. Neto, Valder Steffen Jr, C. Araújo (Universidade Federal de Uberlândia) Nickel-Titanium electrode for radiofrequency hepatic ablation procedure, J. Porcino, A. J. T. 1984 P-BIOE17 Cândido, G. Amaral, L. Fernandes, V. Almeida, G. Firmino, S. R. F. Rosa, A. C. Santos (Universidade de Brasília) Communication device for deafblinds: testing with users for software and hardware 2102 P-BIOE18 enhancements. T. R. Luz, R. Huebner (Universidade Federal de Minas Gerais) COMB – Combustion and Environmental Engineering CODE Engine Combustion A methodology for preliminary design of multi-fuel gas turbine combustor, F. F. de Paula, W. 0250 P-COMB1 O. I. Bohorquez (Universidade Federal de Juiz de Fora) Characterization of flame development in the first cycles of operation in a direct injection 0699 P-COMB2 spark ignition engine fueled with anhydrous ethanol, M. Silva, S. D. M. Boggio, P. Lacava (Instituto Tecnológico de Aeronáutica) A predictive model for knock onset in spark-ignition engines using hydrous ethanol, F. R. dos 0762 P-COMB3 Santos Jr, C. Rufino, J. V. Ferreira (Universidade Estadual de Campinas) Pollutant emissions investigation in a compression ignition engine during warm-up time, L. S. 1030 P-COMB4 Ferrari, N. Costa, R. E. P. Silva (Universidade Federal da Grande Dourados) Simulation of Diesel engine using Biodiesel, F. Gonzaga (Universidade Federal do Pará), R. 1053 P-COMB5 Campos (Instituto Federal do Pará), M. Nogueira, D. R. S. Guerra (Universidade Federal do Pará) Comparison of compressed ignition engines emission consuming pure diesel fuel and mixture 1292 P-COMB6 of diesel and biodiesel, S. Leão, R. Oliveira, M. Nogueira (Universidade Federal do Pará) Thermodynamic modelling development and calibration to support diesel engines indicating 1293 P-COMB7 measurements analysis, R. C. L. de Oliveira, J. L. M. Donatelli, J. J. C. S. Santos, C. C. M. Cunha, A. Chun (Universidade Federal do Espírito Santo), A. Valiati (Termoelétrica Viana SA) Combustion simulation in a gas turbine combustion chamber, E. Yamao (Institutos Lactec), P. I. Ralickas, T. B. Marchese, F. Nara (Instituto de Tecnologia para o Desenvolvimento), E. 1306 P-COMB8 Yamao (Institutos Lactec), J. Borba (Universidade Federal do Paraná), F. Chiesa (Usina Elétrica a Gás de Araucária) Single-zone zero-dimensional model combining wiebe function with chemical equilibrium for spark ignited internal combustion engines, H. de F. Linemburg (Universidade Federal de 1378 P-COMB9 Santa Catarina), R. de C. Catapan (Universidade Federal de Santa Catarina), A. A. M. Oliveira (Universidade Federal de Santa Catarina) Computational study of the effect of variable compression ratio on the performance of an 1659 P-COMB10 internal combustion engine, A. M. Jr (Universidade Federal de Santa Catarina), G. A. R. Couto, G. R. de Souza (Universidade Federal de São João del Rei) The effects of variable-length intake manifold on engine performance: literature review and 1693 P-COMB11 numercal study on HCCI engine, J. V. Alves, L. R. Cancino (Universidade Federal de Santa Catarina) Classification and comparison of fluidized bed used in the oxy-combustion process of mineral 2735 P-COMB12 coal, I. Destro, F. S. Nascimento, P. M. Guimarães, M. A. Nascimento, C. J. R. Coronado (Universidade Federal de Itajubá)

85 POSTER SESSION (CONT.) – MON / 4 Performance and pollutant emissions on a small engine-driven generator operating with 2781 P-COMB13 soybean methyl-ester, K. C. C. Camargo, A. C. C. de Souza, R. E. P. Silva (Universidade Federal da Grande Dourados) The power increase and motor torque of Gm 1.0 Vhc with supercharger, G. Ramos, R. Correia 2810 P-COMB14 (Universidade Estadual do Maranhão) DYNM – Dynamics, Control, Vibrations and Acoustics CODE Acoustics, Vibroacoustics Research on vibration steering wheel vehicle baja univates team, G. Lago, G. C. da Rosa, C. 0594 P-DYNM1 H. Lagemann, R. C. Izquierdo, J. D. I. Silveira (Universidade do Vale do Taquari), M. A. Toso (Instituto Federal de Santa Catarina), R. Garcia (Universidade Federal do Rio Grande do Sul) Development of piezoelectric transducers for acoustic levitation, I. Genuino, B. Lima, F. 1144 P-DYNM2 Fazanaro (Universidade Federal do ABC), M. A. B. Andrade (Universidade de São Paulo) Flow resistivity, characteristic impedance and complex wave number assessment of coconut 2063 P-DYNM3 fiber with thin thickness samples, N. Legat Filho, K. F. de Lima, N. Barbieri, F. J. H. Terashima, V. A. Grossl (Pontifícia Universidade Católica do Paraná) Comparison of sound absorption coefficients of two fine materials according to ASTM E1050- 2108 P-DYNM4 2012, F. J. H. Terashima, N. Legat Filho, P. D. Cirino, K. F. de Lima, N. Barbieri (Pontifícia Universidade Católica do Paraná) Absorbing Boundary Methods for Acoustic Wave Modelling, J. Gomes, R. M. Moreira 2111 P-DYNM5 (Universidade Federal Fluminense) Evaluation of rooms acoustic conditions for music teaching, A. C. M. Mansur (Pontifícia 2152 P-DYNM6 Universidade Católica), E. F. Vergara (Universidade Federal de Santa Catarina) The influence of tyre cavity on road noise: A theoretical and experimental comparison, G. H. 2854 P-DYNM7 Godoi, L. Donadon, R. M. Cunha (Universidade Federal de Minas Gerais), F. L. de C. Moura, W. Barbosa (Fiat Chrysler) ENTS – Energy and Thermal Sciences CODE Applied Heat and Mass Transfer Multiobjective optimization of plate-fin heat exchanger by Tsallis differential evolution, E. H. 0409 P-ENTS1 de Vasconcelos Segundo, V. Mariani, L. Coelho (Pontifícia Universidade Católica do Paraná) Experimental analysis of a screen-covered groove heat pipe, T. A. Alves, L. Krambeck, P. H. D. 0780 P-ENTS2 dos Santos (Universidade Tecnológica Federal do Paraná) Modeling a genset emissions fixation column and microalgae growth enhancement in large 0800 P-ENTS3 scale photobioreactor, J. G. B. Martinez, G. Finger, Y. Kovara, W. Balmant, A. Mariano, J. V. C. Vargas (Universidade Federal do Paraná) An inverse problem using green’s function and tfbgf method to identificate a moving heat 1428 P-ENTS4 source in 3D heat conduction problem, S. Ribeiro, G. Oliveira, G. Guimarães (Universidade Federal de Uberlândia) Analytical-experimental comparative study of a device destined to food heating by 1481 P-ENTS5 electromagnetic induction, H. P. Lemke, L. H. P. Deoclecio, B. de O. Schneider, D. Galina, R. A. Boroto (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo) Mathematical modeling of batch distillation of hydrocarbons produced by microalgae, I. 1556 P-ENTS6 Costa, J. V. C. Vargas, W. Balmant (Universidade Federal do Paraná) On the monitoring of the gas-solid flows in industrial fluidized beds by using electrical charge 1715 P-ENTS7 sensors, M. F. F. de Andrade, E. dos Reis (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo) Numerical simulation of temperature distribution on metal casting in vertical solidification, M. 1880 P-ENTS8 F. F. de Andrade, E. dos Reis (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo) Numerical and experimental analysis of a copper thermosyphon, T. A. Alves, L. Krambeck, C. 2179 P-ENTS9 R. Machado, F. Cabral, A. V. L. Machado, P. H. D. dos Santos (Universidade Tecnológica Federal do Paraná) Analysis of temperature profile and efficiency of convective straight fins with temperature 2214 P-ENTS10 dependent thermal conductivity and internal heat generation, L. Chaves, L. Ferreira, M. Curi (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Measurement of the external surface temperature of roots during preparation for fiberglass posts, M. Duda (Pontifícia Universidade Católica do Paraná), I. Göhringer (Universidade 2272 P-ENTS11 Positivo), G. Sluzala (Pontifícia Universidade Católica do Paraná), G. Haragushiku, M. C. L. Giacomel (Universidade Positivo), I. Bassani, L. F. Botton (Pontifícia Universidade Católica do Paraná)

86 POSTER SESSION (CONT.) – MON / 4 A comparative analysis of the thermal performance of the refrigerants R134a, R245fa, R407c 2631 P-ENTS12 And R600a during flow boiling in a microchannels heat sink, H. L. S. L. Leão (Instituto Federal de Educação, Ciência e Tecnologia Goiano), G. Ribatski (Universidade de São Paulo) Flame profile in a porous radiant burner using 1/2” And 1/4” alumina’s spheres , G. Pante L. 2648 P-ENTS13 de Campos, J. Duarte (Universidade de Fortaleza) Numerical study of heat transfer in extended surfaces with mutual radiation between parallel 2653 P-ENTS14 fins, R. Sobral, J. Quirino, E. D. Correa, R. Gama (Universidade Estadual do Rio de Janeiro) Optimization applied to energy efficiency and thermal comfort of buildings: bibliometric 2732 P-ENTS15 analysis on techniques and applications, C. F. da Silva, R. Z. Freire, N. Mendes (Pontifícia Universidade Católica do Paraná) Modified resistance-in-series model - determination of mean concentration by integral transformation, A. Venezuela, R. F. Cantão (Universidade Federal de São Carlos), R. 2895 P-ENTS16 Ongaratto (Universidade Federal do Rio de Janeiro), R. Haneda (Centro Paulista de Estudos em Agropecuária) Simultaneous estimation of thermal properties using genetic algorithm, F. Malheiros, J. 5024 P-ENTS17 Gomes, A. Figueiredo, L. H. da S. Ignacio, G. Guimarães (Universidade Federal de Uberlândia) Influence of convection on the interfacial heat transfer coefficient in upward solidification of 5321 P-ENTS18 hypoeutectic Al-Si Alloys, E. Lins, G. Stieven, D. Soares (Universidade Federal do Pará), E. Oliveira (Universidade Federal do Sul e Sudeste do Pará) Mathematical modelling and simulation of microalgae biomass drying process, F. P. Disconzi, 6491 P-ENTS19 W. Balmant, J. V. C. Vargas (Universidade Federal do Paraná) FLMR - Fluid Mechanics and Rheology CODE Computational Fluid Dynamics Computational Fluid Dynamics applied in a solar chimney analysis, F. A. Soares, P. Araujo, A. 0241 P-FLMR1 Rezende (Instituto Militar de Engenharia) An assessment of different turbulence models on a CFD simulation of air flow past a S814 airfoi, C. C. de A. Bezerra, A. M. Araújo, A. A. C. Silva, C. L. dos Santos, E. C. R. Fernandes, E. 0306 P-FLMR2 Menezes, G. J. A. M. Rocha, V. F. S. Rodrigues (Universidade Federal de Pernambuco), W. F. A. Borges, J. A. P. da Costa (Instituto Federal de Pernambuco) Numerical simulation of turbulent flow over a backward-facing step, F. A. Soares, P. Araujo, 0385 P-FLMR3 A. Rezende (Instituto Militar de Engenharia) Particle deposition in a ventilation duct bend, E. H. de V. Segundo, M. B. Lopes, V. Mariani 0417 P-FLMR4 (Pontifícia Universidade Católica do Paraná) Numerical simulation of gas and liquid in internal loop airlift reactor, R. F. da Silva, V. Mariani 0427 P-FLMR5 (Pontifícia Universidade Católica do Paraná) Study of Scale-Adaptive Simulation Model in Recirculating Flows, L. O. de C. Bovolato, P. 0430 P-FLMR6 Greco (Universidade de São Paulo) Numerical study of the flow around slender bodies using a lagrangian vortex method, C. F. C. 0432 P-FLMR7 Junior, A. Bimbato (Universidade Estadual Paulista Julio de Mesquita Filho), L. A. A. Pereira (Universidade Federal de Itajubá) A new approach to randomly generate porous media to perform CFD simulations, J. L. 0596 P-FLMR8 Ansoni, L. F. de Souza, A. Castelo (Universidade de São Paulo), A. Afonso (Faculdade de Engenharia da Universidade do Porto) Heat transfer in a Taylor-couette flow, V. H. Chiumento, V. Malatesta (Universidade Federal 0679 P-FLMR9 de Santa Catarina) Numerical analysis and experimental of temperature distribution of absorber plate a flat 0707 P-FLMR10 plate solar collector, G. A. A. Moreira, Z. Silva (Universidade Federal da Paraíba), R. M. Valle, A. L. Viana (Universidade Federal de Minas Gerais) Influence factors in the performance in a tracing of a friendly fish turbine hydraulic channel, 0788 P-FLMR11 G. E. N. del Rio, R. G. R. Camacho, T. M. A. Angulo, W. de Oliveira (Universidade Federal de Itajubá) Numerical analysis of the flow field in a helical-axial multiphase pump stage with splitter 0812 P-FLMR12 blade in the diffuser, Y. F. Q. Gamboa, R. G. R. Camacho, W. de Oliveira (Universidade Federal de Itajubá) Study of the influence of wind tunnel components geometries on laminar flow, M. Resende, J. 0877 P-FLMR13 de A. Júnior, M. E. Silveira, B. Vargas (Universidade Federal de São João del Rei) Comparison between numerical CFD model and experimental evaporative condenser data, F. Carrir, I. A. Júnior (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do 0911 P-FLMR14 Sul), E. dos Santos, P. S. Schneider (Universidade Federal do Rio Grande do Sul), M. M. Rebelato (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Sul) 87 POSTER SESSION (CONT.) – MON / 4 Numerical solutions of eletroosmotic newtonian/non-newtonian fluid flows, W. de S. Bezerra 0937 P-FLMR15 (Universidade de São Paulo), A. Afonso (Universidade do Porto, Portugal), A. Castelo (Universidade de São Paulo) Numerical simulation of an ejector using the Openfoam® solvers, W. Novais, V. L. Scalon 0948 P-FLMR16 (Universidade Estadual Paulista) Analysis of unsteady friction models for one-dimensional pipe flow at the light of the second 0955 P-FLMR17 law of thermodynamics, J. S. G. Filho, F. B. de F. Rachid (Universidade Federal Fluminense) Stratification effects on turbulent open channel flows, R. Siqueira, M. de O. dos Santos, J. D. 1043 P-FLMR18 Cussuol (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo) Numerical avaliation of airflow in naturally ventilated DSF, L. C. O. de Souza, H. A. Souza, E. 1080 P-FLMR19 Rodrigues (Universidade Federal de Ouro Preto) Numerical study of fluid dynamic flow within an internal combustion engine cylinder, A. M. 1131 P-FLMR20 Souza, A. C. V. de Oliveira, E. T. Ribeiro, F. Souza, M. C. Chiari (Universidade Federal de Uberlândia) Non-isothermal fluid flow in a T-junction, A. D. Ferreira, S. R. de F. Neto (Universidade 1156 P-FLMR21 Federal de Campina Grande) Optimization study on an ultra-low head bulb hydro turbine, A. C. B. Botan, R. G. R. 1237 P-FLMR22 Camacho, G. Tiago Filho (Universidade Federal de Itajubá) Methodology for the numerical analysis of a fan/nozzle system using computational fluid 1320 P-FLMR23 dynamics, R. Radtke, T.-D. Vecina, A. P. Petry, L. B. Kothe, J. L. Luz (Universidade Federal do Rio Grande do Sul) Aerodynamic study in bluff body with a diffuser in ground effect assessed with fluid dynamics 1414 P-FLMR24 tools, F. E. M. Colus (Universidade de Brasília), L. F. Paulinyi (Universidade de Brasília) Aerodynamic study of Fformula 1 wing in ground effect using computational fluid dynamics, I. 1445 P-FLMR25 de Oliveira, L. F. Paulinyi (Universidade de Brasília) MMEN - Materials and Manufacturing Engineering CODE Union and Assembly Processes Coating Welding With Cored Wire And Monitoring With Accelerometer, M. V. Silva, É. F. T. 0724 P-MMEN1 Olivio, C. A. Correa (Universidade Tecnológica Federal do Paraná) Comparison Of Resistance Limits Of A Welded Joint Obtained In Tension Tests With Values Calculated From The Literatur, R.l D. Dalagnol, R. Pereira, C. Luchezi, A. Esposito, A. J. 1488 P-MMEN2 Bühler, G. G. Soares (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Sul) Development Of A Brushless Eletric Motor, A. C. dos S. Menezes, L. de C. Ferreira Neto, L. G. 2128 P-MMEN3 D. Menezes Filho, J.Medeiros (Universidade Federal do Vale do São Francisco) Application Of The Processes Failures Models Efects Analysis Techniques (Pfmea) To The Naval Pipe Assembly Process, M. Silva (Universidade Federal de Pernambuco), I. Lira (Instituto Federal de Pernambuco), A. Siqueira, C. Gomes, E. Braga (Universidade Estácio de 2786 P-MMEN4 Sá), J. E. B. da Costa (Centro Universitário Estácio do Recife), L. Pontes, M. R. Freire (Universidade Estácio de Sá), V. Carvalho (Centro Universitário Estácio do Recife), W. A. de L. Oliveira (Universidade Estácio de Sá), I. Carneiro (Faculdade Joaquim Nabuco), T. Barretto (Universidade Federal da Bahia) Application of the processes failures models effects analysis technique (pfmea) to the naval pipe manufactoring process, M. Silva (Universidade Federal de Pernambuco), I. Lira (Instituto Federal de Pernambuco), A. Siqueira, C. Gomes, E. Braga (Universidade Estácio de 2891 P-MMEN5 Sá), J. E. B. da Costa (Centro Universitário Estácio do Recife), L. Pontes, M. R. Freire (Universidade Estácio de Sá), Venerando carvalho (Centro Universitário Estácio do Recife ), W. A. de L. Oliveira (Universidade Estácio de Sá), I. Carneiro (Faculdade Joaquim Nabuco - Recife), T. Barretto (Universidade Federal da Bahia) Analysis Of The Welding Parameters And Mechanical Properties In A Butt Joint Of Aa2198 5344 P-MMEN6 T851 Alloy Laser Welded For Use In The Aircraft Industry, W. Nascimento, L. Moreira Filho, R. Perez (Instituto Tecnológico de Aeronáutica), H. Izário Filho (Universidade de São Paulo) CODE Project and Management Modeling And Measuring Of Competitiveness In Industrial Maintenance In Hospitals: Study 0034 P-MMEN7 Of Multiple Cases With Multicriterial Analysis, G. Zucchetti, E. O. B. Nara, F. L. da Silva (Universidade de Santa Cruz do Sul) Improvement Of Sawing Process With Hard Metal Blades For High Chromium Tubes, I. 0479 P-MMEN8 Oliveira, M. Câmara (Universidade Federal de Minas Gerais) Development Of A Flexural Fatigue Device For Polymeric Samples Analisys, B. Vargas, J. de 0907 P-MMEN9 Avila Jr., M. E. Silveira, M. Resende (Universidade Federal de São João del Rei)

88 POSTER SESSION (CONT.) – MON / 4 Economic Viability Of Β Titanium Alloys For Application In Orthopedic Implants, R. C. Toledo, 1026 P-MMEN10 M. B. de Oliveira, A. de O. F. Hayama (Universidade Federal de Mato Grosso) Fabrication Of Blades With Different Airfoil For A Small Wind Turbine, P. Celestino, S. Queiroz, A. S. de A. Silva, I. de S. Queiroz Jr. (Universidade Federal Rural do Semi-Árido), I. 1509 P-MMEN11 B. de Almeida (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte) Design, Manufacturing And Testing Of A Low Cost Mechanical Raw Material Carrier For A 2259 P-MMEN12 Recycling Plant, A. Delfim, G. M. de A. Carvalho, B. S. de Lima, R. M. de Oliveira, B. Murta (Universidade Federal de Minas Gerais) Evaluation Of The Potentialities Of The Newly Developed Automatic Device For The Torsion 2573 P-MMEN13 Welding Test Of Spot Weld, T. L. D. de Avila, A. Bracarense (Universidade Federal de Minas Gerais) Air forced mechanism to improve motion on ultralights tires, A. Popiolek, M. H. da Silva, P. 2620 P-MMEN14 Romio (Universidade do Vale do Itajai) Universal parameter language for the programming of numerical commanding machines, M. 2709 P-MMEN15 A. da F. Gonçalves, M. Eckhardt, C. Scheuer (Universidade Federal de Santa Maria) Evaluation and development of restraint systems for children in emergency transport, A. F. P. 2721 P-MMEN16 Tavares, A. C. F. de Arruda, V. C. de Souza, C. Quiroz (Universidade Estadual de Campinas) Design of planetary mill with friction wheels transmission, I. L. de Camargo (Escola de 2723 P-MMEN17 Engenharia de São Carlos), J. Lovo, C. Fortulan (Universidade de São Paulo) Development of a preventive maintenance method applicable to small and medium 2829 P-MMEN18 companies, R. A. M. Carrillo, A. B. de Abreu (Universidade Federal de Itajubá) MECH - Mechatronics and Automation CODE Control Systems Hybrid remotely operated vehicle (hrov) subjected to mimo sliding mode control, R. Cardoso, 0067 P-MECH1 M. E. M. Meza (Universidade Federal do ABC) Automation System Development For Multiprocess Welding Mechanism, I. M. Nunes, J. B. 0252 Gonçalves, L. R. R. da Silva, D. R. S. da S. Araújo, G. Souza, A. C. B. Zancanella (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo) A Genetic Algorithm Based Clustering Applied To Multivariate Time Series, K. Ribeiro, C. 0404 P-MECH2 Fontes (Universidade Federal da Bahia) Wind turbine control tuning with multi-objective optimisation techniques, G. R. Meza, A. F. da 1229 P-MECH3 Cruz, O. C. Junior (Pontifícia Universidade Católica do Paraná) Controller Tuning Based On Optimization Metaheuristics Applied To A Twin-rotor System, L. Coelho (Pontifícia Universidade Católica do Paraná), G. da Silva (Universidade Federal do 1317 P-MECH4 Paraná), A. L. Luppi, F. Betoni (Pontifícia Universidade Católica do Paraná), I. L. R. Silva (Universidade Feredal do Paraná) Identification of stabilization parameters of regional amazonian boats, F. J. A. Soares, Á. 1442 P-MECH5 Peres, C. Neves (Instituto Federal De Educação Ciência e Tecnologia do Amazonas) Rainwater harvesting automatic system, D. A. Lemos, M. Araújo, A Pordeus (Universidade 1530 P-MECH6 Federal do Rio Grande do Norte) Development of an oscillation control system test bench for riverboat, W. de B. Vidal Filho, J. 1892 P-MECH7 C. P. Passos, A. Pinto (Universidade de Brasília) Displacement system in three cnc coordinates for welding table with activation by Arduino, K. 2505 P-MECH8 Rodrigues, K. Aquino, J. E. S. Lucas, W. Castro Filho, C. V. P. Costa Jr., R. Gonçalves, W. P. Martins (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão) Determination of optimal parameters for pid controller based on the evaluation of the 2521 P-MECH9 transient response using genetic algorithm, C. I. R. Jaimes, E. Rodriguez, A. Alvares (Universidade de Brasília) Robust output feedback control of an electro-hydraulic actuator with uncertain parameters, 2622 P-MECH10 A. Zachi, C. A. Correia, J. Gouvêa (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), W. M. Bessa (Universidade Federal do Rio Grande do Norte) Modelling and controlling of an electric powered wheelchair using the control Lyapunov 2701 P-MECH11 Function, A. Jorge, L. A. Riascos (Universidade Federal do ABC) Reconciliation Of Patterns In The Clustering Of Time Series, I. Silva, P. M. A. Aragão, C. 2900 P-MECH12 Fontes, R. M. Fontes, M. Embiruçu (Universidade Federal da Bahia)

89 POSTER SESSION (CONT.) – MON / 4 NMMS - Nano and Microfluidic and Micro-Systems CODE Nano and Microfluidic and Micro-Systems Experimental Analisys On The Thermal Performance Of Mwcnt/Water Nanofluids In A Car 0348 P-NMMS1 Radiator, E. M. C. Contreras (Universidade Federal de Uberlândia), G. Oliveira (Universidade Federal do Triângulo Mineiro), E. Bandarra Filho (Universidade Federal de Uberlândia) Flow Uniformization in Parallel Microchannel Heatsink, A. L. de Souza, A. Franco 0523 P-NMMS2 (Universidade Tecnológica Federal do Paraná) Design, Fabrication and Test of W-DLC Thin-Film Resistors for MEMS Sensing Applications, M. A. Fraga (Universidade Brasil), G. Leal (Universidade Federal de São Paulo), H. Furlan 1276 P-NMMS3 (Centro Estadual de Educação Tecnológica Paula Souza), L. A. Rasia (Universidade Regional do Noroeste do Estado do Rio Grande do Sul), L. Koberstein (Faculdade de Tecnologia de São José dos Campos), M. Massi (Universidade Presbiteriana Mackenzie) Design and construction of a heat exchanger: use of nanofluids (gold nanoparticles in base fluid), M. B. Fogaça, T. P. A. Ferreira, J. J. R.-Behainne (Universidade Tecnológica Federal do 1664 P-NMMS4 Paraná), V. Lenart, S. L. Gomez (Universidade Estadual de Ponta Grossa), R. de F. Turchiello (Universidade Tecnológica Federal do Paraná) OSPE - Offshore and Petroleum Engineering CODE Offshore and Petroleum Engineering Pectin As A Biological Kinetic Inhibitor On The Nucleation Of Gas Hydrates, B. L. L. D. Silva, B. 0102 P-OSPE1 Drumond, B. O. Fialho, J. A. Castro (Universidade Federal Fluminense), A. Teixeira (Universidade Federal do Rio de Janeiro) Evaluation Of The Consequences Of Free Falling Loads In Polyester Yarns, E. Louzada, C. E. 0369 P-OSPE2 M. Guilherme (Universidade Federal do Rio Grande), F. T. Stumpf (Universidade Federal do Rio Grande do Sul) Effect Of Concentration, Stirring And Temperature On Corrosion By Naphthenic Acid In A335- 0783 P-OSPE3 p5 Steels Using The Electrochemical Noise Technique, A. Baptista, A. C. Abrantes (Uninter), L. H. S. da Silva, H. de A. Ponte (Universidade Federal do Paraná) Random Walk In Petrophysics, D. Silva, A. Zabot, D. N. Siebert (Universidade Federal de 0820 P-OSPE4 Santa Catarina) Evaluation Of The Influence Of The Viscosifier On The Properties Of Synthetic Drilling Fluids J. 0888 P-OSPE5 C. M. Mendonça, L. Amorim, R. C. A. M. Nascimento (Universidade Federal de Campina Grande) Development Of An Apparatus For Producing Wax Deposition In Pipe Sections For Pigging 2004 P-OSPE6 Tests, G. G. Demetrio, I. M. Pepe (Universidade Federal da Bahia), I. J. Rodowanski, L. C. S. Jr. (Universidade Federal do Recôncavo da Bahia) Evaluation Of Modified Starches Used In Mining For Application In Drilling Fluids. K. Nóbrega, 2708 P-OSPE7 S. Silva, L. Amorim, H. Lira (Universidade Federal de Campina Grande), J. Magalhães (Company System Mud an Imdex Limited Company) Comparing Pressure Losses On The Reverse And Direct Circulation Systems, W. R. P. da 2734 P-OSPE8 Costa, L. Amorim (Universidade Federal de Campina Grande) Study Of The Relationship Between The Mineralogical Composition And The Disintegration 2776 P-OSPE9 Of Shales From Paraíba And Ceará States Of Brazil, M. N. C. Brunet, C. Leal, L. Amorim, F. C. C. Nogueira, W. R. P. da Costa, H. Lira (Universidade Federal de Campina Grande) Obtaining Creep Curves For Polymer Materials Using The Stepped Isothermal Method. L. 5485 P-OSPE10 Cofferri, C. E. M. Guilherme (Universidade Federal do Rio Grande), F. T. Stumpf (Universidade Federal do Rio Grande do Sul) PIPV - Piping and Pressure Vessels CODE Piping and Pressure Vessels Measuring, Materials Characterization And Numerical Simulation In Pressure Vessel With 0841 P-PIPV1 Cylindrical Hull And Torispherical Lid. G. R. Melhorim, M. S. Lima Jr., A. Bahiense, C. E. G. Ribeiro (Instituto Federal do Espírito Santo) Structural Analysis And Fatigue Life Calculation Of A Coke Drum. D. F. B. Lima, J. Pereira 1583 P-PIPV2 (Universidade Federal do Paraná) Conception Of A Pressurized Electrochemical Cell For Corrosion Studies, C. Macêdo, G. 2403 P-PIPV3 Baumann, V. F. S. N. M. da F. T. de S. Araújo, F. N. da Silva, J. T. N. de Medeiros (Universidade Federal do Rio Grande do Norte)

90 POSTER SESSION (CONT.) – MON / 4 SOLM - Solid Mechanics CODE Structural Statics and Dynamics Mechanical evaluation of the welded union of a tie-rods for use in slope containment, A. C. B. 0555 P-SOLM1 Zancanella (Universidade Federal do Espírito Santo), D. Z. de Camargo, L. R. R. da Silva, B. C. Bragança (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo) Topological Optimization Applied To Design A Structural Component Of An Autonomous 0608 P-SOLM2 Competition Robot, L. Figueiredo, J. de Avila Jr (Universidade Federal de São João del Rei) Modeling And Dynamic Analysis Of A Single-seat Off-road Vehicle’s Tubular Chassis, E. 0856 P-SOLM3 Ataide (Instituto Federal de Pernambuco) High Strain-rate Behavior Of Fiber-reinforced Thermoplastic Composites Under Compressive Loadings, C. R. Montes (Universidad Autónoma de Nuevo León), V. Reis, C. V. Opelt 1122 P-SOLM4 (Instituto Tecnológico de Aeronáutica), R. Santiago (Universidade Federal do ABC), M. Rezende (Universidade Federal de São Paulo), C. Gaona (Universidad Autónoma de Nuevo León), M. Donadon (Instituto Tecnológico de Aeronáutica) Numerical Evaluation Of Hic In Formula Sae Vehicles With Different Types Of Impact 1314 P-SOLM5 Attenuators, L. G. de Almeida, S. Cunha, M. E. Silveira (Universidade Federal de São João del Rei) Numerical methods of phase shifting to stress measurement with digital photoelasticity using plane polariscope. F. Vieira, J. S. R. Martins (Pontifícia Universidade Católica de Minas 2045 P-SOLM6 Gerais), J. M. S. Ribeiro (Centro Federal de Educação Tecnológica de Minas Gerais), M. V. dos S. Rocha, P. A. A. Magalhães Jr. (Pontifícia Universidade Católica de Minas Gerais) Topology Optimization for Several Boundary Conditions in Statically Loaded Structures, L. 2056 P-SOLM7 Dornelles, D. M. De Leon (Universidade Federal do Rio Grande do Sul) Experimental Characterization of the Mechanical Properties of a 3D printed test body with 2230 P-SOLM8 internal structures. G. Barbosa, J. de Avila Jr (Universidade Federal de São João del Rei) Analysis of the influence of the cross-sectional geometry of reinforcing fibers on the effective 2334 P-SOLM9 properties of transversely isotropic materials. M.Madrid, R. Marczak (Universidade Federal do Rio Grande do Sul) Evaluation of the WEB platform as a learning tool in Mechanical Engineering. F.P. Maia, N. M. 2500 P-SOLM10 da F. T. de S. Araújo, C. M. Lima (Universidade Federal do Rio Grande do Norte) Study of roughness in a Tesla turbine. L. Souza (UNIP), G. Placco (Instituto Tecnologico de 2612 P-SOLM11 Aeronáutica), L. Mariano, R. Paceli, A. C. A. Jr, R. Oliveira, L. G. de M. Paracêncio (UNIP) Numerical Procedure Based On Finite Elements Method And Theory Of Cosserat Rods For 2807 P-SOLM12 Structures Subjected To Static Loads. R. G. Baptista, T. Silvestre, M. H. Takahama, A. Borges (Universidade Tecnológica Federal do Paraná) Evolutionary structural optimization for natural frequency maximization of structures with 2901 P-SOLM13 cyclic periodicity. A. V. G. Campos, R. Pavanello, W. Vicente (Universidade Estadual de Campinas)

POSTER SESSION TUE / 5 AERO – Aerospace Engineering CODE Aerospace Structures Conceptual design of UAV flying wing for construction in 3D printer, B. O. Lopes, W. F. 2074 P-AERO12 Amorim Jr (Universidade Federal de Campina Grande) Prediction of the crack pattern in ceramic composites subjected to thermal loadings using 2859 P-AERO13 lattice models. H. Zanardi, I. Zago, R. A. Angélico (Universidade de São Paulo) Design of one strand burner combustion chamber for tests of solid propellants to low power 2882 P-AERO14 rockets. A. P. Rodrigues, T. Araujo (Universidade Federal do ABC) CODE Control Systems and Aeroelasticity A case study of a LQG/LTR controller applied to UAV: a practical approach. P. R. Ferreira, N. 0900 P-AERO15 M. F. Oliveira (Instituto Tecnológico de Aeronáutica) Development of a vertical static test bench for amateur rocket engines. D. Moraes F. 1405 P-AERO16 Telöken, M. Poletto, T. C. Severo (Universidade de Caxias do Sul) Application of classical and modern techniques in attitude control of a satellite mockup. L. B. 2014 P-AERO17 D. E. Rosa, A. F. Coelho (Instituto Federal de Educação, Ciência e Tecnologia Fluminense), R. Santos (Instituto Tecnológico de Aeronáutica)

91 POSTER SESSION (CONT.) – TUE / 5 Attitude determination for a Brazilian cubesat mission using the Kalman filter. K. M. dos 2752 P-AERO18 Santos, F. Coelho, A. L. da Silva (Universidade Federal de Santa Maria) Hardware and software in the loop for V&V of real-time embedded software in aerospace applications. S. Mirachi (EMBRAER), E. Villani, G. Correa (Instituto Tecnológico de 2888 P-AERO19 Aeronáutica), H. E. Fernandes (Universidade Estadual de Campinas), R. de Souza (EMBRAER), G. M. Maiolino (Instituto Tecnológico de Aeronáutica) CODE Flight Dynamics The influence of the Reynolds number on the linear instability of laminar separation bubbles in the absence of environmental disturbances. E. M. Gennaro, B. D. P. de Souza 0208 P-AERO20 (Universidade Estadual Paulista Julio de Mesquita Filho), D. Rodriguez (Universidade Federal Fluminense) Earth-moon trajectories based on variational equation for Jacobi integral. L. A. Gagg Filho, S. 0377 P-AERO21 da S. Fernandes (Instituto Tecnológico de Aeronáutica) Optimal two-impulse trajectories for earth-moon flight in the elliptic restricted three-body 0378 P-AERO22 problem. S. da S. Fernandes, M. Macêdo, L. A. Gagg Filho (Instituto Tecnológico de Aeronáutica) BIOE – Bioengineering CODE Biomechanics Tendency of tooth movement produced by different cross-sections of a T-loop orthodontic spring: an analysis by the finite element method. F. R. M. Rodrigues, P. C. Borges, M. A. 0029 P-BIOE19 Luersen (Universidade Tecnológica Federal do Paraná), M. A. Ferreira (Private practice, DDS, PhD) Analysis of vibration in urban train commuters in Porto Alegre and metropolitan region 0053 P-BIOE20 concerning comfort and health. M. Fedatto Neto, H. Gomes (Universidade Federal do Rio Grande do Sul) Transient thermal analysis of a MR clutch for knee prostheses and exoskeletons. R. Andrade (Universidade Federal de Minas Gerais), L. de A. Paulo (Universidade Federal do Espírito 0311 P-BIOE21 Santo), A. Bento Filho (Universidade Federal do Espírito Santo), C. Vimieiro (Universidade Federal de Minas Gerais) Test bench to experimental modeling of an magneto-rheological actuator for knee prostheses and exoskeletons. R. Andrade (Universidade Federal de Minas Gerais), I. B. Vieira 0313 P-BIOE22 (Universidade Federal do Espírito Santo), G. Fontoura (Universidade Federal do Espírito Santo), A. Bento Filho (Universidade Federal do Espírito Santo), C. Vimieiro (Universidade Federal de Minas Gerais) A continuous passive motion aquatic device. R. S. Gonçalves, I. de P. C. Borges, J. Carvalho 0661 P-BIOE23 (Universidade Federal de Uberlândia) Bayesian approach to parameter estimation and selection of growth models of tumor cells. 0814 P-BIOE24 A. da Mata (Universidade Federal do Espírito Santo), J. M. J. da Costa (Universidade Federal do Amazonas), W. B. da Silva, J. C. S. Dutra (Universidade Federal do Espírito Santo) Modeling in finite elements of the temporomandibular joint. S. Del Vecchio, R. M. M. 0949 P-BIOE25 Vasconcellos, (Instituto Federal do Sudeste de Minas - Campus Juiz de Fora), F. Bastos (Universidade Federal de Juiz de Fora ) Development and experimental validation of a three-dimensional model in finite elements for stress analysis in an endodontic instrument. C. Mesquita Neto, J. C. M. Fernandes 1129 P-BIOE26 (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru), R. Midena, M. Alcalde, R. Vivan (Universidade de São Paulo), E. C. Sousa (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) Measuring in skin expansion apparatus. R. C. Pizzaia, G. Sampaio, H. I. Weber, D. Pamplona 1209 P-BIOE27 (Pontifícia Universidade Católica do Rio de Janeiro) Analyzing motor primitives of healthy subjects wearing a lower limb exoskeleton. P. F. 1214 P-BIOE28 Nunes, W. dos Santos (Universidade de São Paulo), S. Lourenco (Universidade Federal de São Carlos), A. Siqueira (Universidade de São Paulo) An analysis of deformation in an arteriovenous fistula model. J. F. Rangel, K. Bessa, W. B. de 1682 P-BIOE29 A. Santos, S. Souza, V. B. Fernandes (Universidade Federal do Rio Grande do Norte) An analytical approach for the prediction of the profile of forces of a manual wheelchair 1878 P-BIOE30 propulsion. D. Novais, M. Souza, C. Araújo, M. Guimarães, D. Augusto (Universidade Federal de Uberlândia) Study of the mechanical properties of anti-fatigue mats. F. F. D. e Silva (Instituto Federal de 1969 P-BIOE31 Minas Gerais - Ouro Branco), E. A. Schirmer, M. Marcal, F. Maynart, L. A. G. Torres (Universidade Federal dos Vales do Jequitinhonha e Mucuri)

92 POSTER SESSION (CONT.) – TUE / 5 Cranial deformation applying finite element analysis (FEA). L. Pereira, C. Araújo, T. G. 1994 P-BIOE32 Cardoso, J. Borges (Universidade Federal de Uberlândia) Evaluation of power transmission in cycling for transtibial amputees. K. A. Fernandes, C. 2002 P-BIOE33 Araújo, F. L. de Souza (Universidade Federal de Uberlândia) Analysis of transfer of forces in the articulations of the lower members during the human gait. J. S. R. Martins, F. Vieira (Pontifícia Universidade Católica de Minas Gerais), C. Vimieiro 2198 P-BIOE34 (Universidade Federal de Minas Gerais), J. M. S. Ribeiro (Centro Federal de Educação Tecnológica de Minas Gerais Development of an ergometric prototype to assist in physical activities of people with paraplegia in order to combat obesity and cardiorespiratory diseases. M. da S. Serejo, K. 2268 P-BIOE35 Martins, G. H. S. Oliveira, E. Martins, C. V. P. Costa Junior, K. Barbosa, A. S. de Alencar (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão) Development of a versatile tactile measurement system for the mapping of individual 2392 P-BIOE36 footprints. W. Domingos, I. Brito, I. Capanema, M. Sesselmann (Universidade Federal de Minas Gerais) Electromechanic upper limb dynamic orthosis for rehabilitation of hand and elbow. M. V. F. de Andrade, F. Ferreira (Universidade Federal de Minas Gerais), S. De-Stefano (Pontifícia 5264 P-BIOE37 Universidade Católica de Minas Gerais), A. M. V. N. Van Petten (Universidade Federal de Minas Gerais), D. N. Rocha (Instituto Federal de Minas Gerais), C. Vimieiro (Universidade Federal de Minas Gerais) Stereoscopic fringe projection system for human tooth arcade measurement. S. Del Vecchio 5720 P-BIOE38 (Instituto Federal do Sudeste de Minas - Campus Juiz de Fora), M. Sesselmann, M.arcos Pinotti (Universidade Federal de Minas Gerais) Comparison between atrial fibrillation detection algorithms based on rr intervals. M. F. de 5901 P-BIOE39 Paulo, E. Bock (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo) Computational simulation to compare two racing wheelchair models using finite element 5940 P-BIOE40 method, T. Donegá, C. Araújo (Universidade Federal de Uberlândia) COMB – Combustion and Environmental Engineering CODE Chemical Kinetics and Modeling Numerical CFD evaluation of a flameless burner using detailed chemical kinetics. T. Donegá, 1976 P-COMB15 C. Araújo (Universidade Federal de Uberlândia) Analysis of moisture adsorption isotherms for roasted and raw biomasses. M. Peniche, F. 5813 P-COMB16 Neto, L. Batistella (Universidade Federal do Pará), R. Gonçalves (Instituto Tecnológico de Aeronáutica), M. Nogueira (Universidade Federal do Pará) CODE Combustion, Pirolisis and Gasification of Solids and Liquids 2D-rayleigh scattering thermometry in post-flame: polarization strategy. D. J. de Oliveira, G. 0299 P-COMB17 B. Antunes, M. E. Sbampato, L. G. Barreta, L. R. dos Santos, C. A. Martins (Instituto Tecnológico de Aeronáutica) Construction a bench co-current bed model gasifier suitable for the local biomasses. M. A. A. 0373 P-COMB18 Leite, L. G. R. Lioba, J. Duarte (Universidade de Fortaleza) Optimization of the synthesis gas modeling obtained from a fluidized bed gasifier using the 0436 P-COMB19 Kuhn-Tucker multipliers. J. A. Gutierrez, I. Ávila, A. Mendiburu (Universidade Estadual Paulista Julio de Mesquita Filho) Simulation of in-situ combustion process in laboratory scale. L. H. P. Deoclecio, Filipe A. F. 0860 P-COMB20 Monhol, A. P. Meneguelo (Universidade Federal do Espírito Santo) Coconut shell gasification numerical modeling in a downdraft reactor. C. L. Vago, M. Abreu, 0872 P-COMB21 F. A. F. Monhol, C. E. S. Abreu , L. R. R. da Silva (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo) Design of a reactor for the analysis of combustion in a reactive porous medium. L. H. P. 0903 P-COMB22 Deoclecio, F. A. F. Monhol (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo), D. Ribeiro (Universidade Federal do Espírito Santo) Spray-flamelet approach by means of a monotonic cumulative mixture fraction variable. D. 1074 P-COMB23 Maionchi (Universidade Federal de Mato Grosso), F. Santos (Universidade Federal do Rio de Janeiro), J. Melguizo-Gavilanes (California Institute of Technology) Experimental parameters from fluid dynamics and natural gas combustion in fluidized bed 1437 P-COMB24 reactor. J. D. M. Feitosa, W. Barcellos, T. Pires, W. C. Araújo, L. R. da Costa , T. M. Dantas, F. E. P. Cardoso, K. Ribeiro, M. C. D'Amico, J. W. C. de Araújo (Universidade Federal do Ceará) Size effect of wooden pieces on the performance of a biomass gasifier. F. de S. Silva, A. S. 1547 P-COMB25 Rumão, H. T. Macau, W. Galdino, A. F. Alves, E. Jaguaribe (Universidade Federal da Paraíba)

93 POSTER SESSION (CONT.) – TUE / 5 Thermodynamic evaluation of process to obtain charcoal from the slow pyrolysis of Babassu 1624 P-COMB26 coconut. F. E. T. de Luna (Universidade Federal da Paraíba), L. Guedes (Instituto Federal do Ceará), H. T. Macau, R. J. F. Macedo (Universidade Federal da Paraíba) Behavior analysis of ozone addition to an ethanol/O2 reactive flow simulation. G. S. Q. de 1732 P-COMB27 Oliveira, G. Stieven, L. Costa (Universidade Federal do Pará), R. Gonçalves (Instituto Tecnológico de Aeronáutica) A study of biochar yield from the slow pyrolysis of rice husk. F. R. Vieira (Universidade 2258 P-COMB28 Estadual Paulista Julio de Mesquita Filho) Upgrading residual biomass by HHV increases in torrefaction. R. L. da Silva (Universidade 2564 P-COMB29 Federal da Grande Dourados), C. S. Michels, P. S. Schneider (Universidade Federal do Rio Grande do Sul), S. Soares (Universidade Federal de Mato Grosso) DYNM – Dynamics, Control, Vibrations and Acoustics CODE Control Modeling and construction of a magnetic levitator applied in an academic environment. C. 0161 P-DYNM8 Pedra, M. E. M. Meza (Universidade Federal do ABC) Multimodal vibration control using dynamic neutralizers in rotating machines. D. R. Voltolini 0740 P-DYNM9 (WEG Equipamentos Elétricos), S. Kluthcovsky (Universidade Federal do Paraná), E. M. de O. Lopes, C. A. Bavastri (Universidade Federal do Paraná) Nonlinear modeling, simulation and control of a two-wheeled inverted pendulum. G. D. 0965 P-DYNM10 Silva, B. L. Pereira, A. Sousa, L. Sanches, J. J. P. Z. de S. Tavares, R. HIROSHI Murofushi, R. Cardoso (Universidade Federal de Uberlândia) Using multi-objective optimization design for driven pendulum system control. A. R. Santos, 1531 P-DYNM11 G. H. B. Andrade (Universidade Federal do Paraná), G. R. Meza, L. Coelho (Pontifícia Universidade Católica do Paraná) PID temperature control algorithm design, implementation and test for coffee dryers with air 1998 P-DYNM12 flow mixing automation system. B. Murta, A. Delfim, L. C. B. de Sá, E. Lima II, T. Souza (Universidade Federal de Minas Gerais) Bio-inspired optimation applied to the tuning of model predictive control parameters. E. 2851 P-DYNM13 Mesquita, C. H. Llanos, R. Sampaio (Universidade de Brasília) On line monitoring of bearing faults by fuzzy logic. R. Pereira, J. D. Nolasco, V. A. D. Silva, J. 2860 P-DYNM14 N. Brito (Universidade Federal de São João del Rei) CODE Dynamics Vibration analysis during the operation of a tractor with agricultural implements. A. 1630 P-DYNM15 Boaventura, V. Schutzer, M. Quartaroli, S. Leite, B. R. de Pontes Jr, J. E. Santos (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) Reduction of the dynamic response of transmission towers through the insertion of 2343 P-DYNM16 viscoelastic material. P. Freisleben, W. D. Ukasinski (Universidade Positivo), F. Silva (Universidade Federal do Paraná) Evaluation of occupational noise in welders during different welding processes. W. Santos 2621 P-DYNM17 (Universidade Federal de Santa Catarina), C. Lima (Universidade Federal do Pará), M. Veloso (Universidade Federal de Santa Catarina) ENTS – Energy and Thermal Sciences CODE Numerical Heat Transfer Methodology for thermal simulation of electronic devices. R. R. Sousa (Universidade Federal 0001 P-ENTS20 da Grande Dourados), A. T. Paschoalini (Universidade Estadual Paulista Julio de Mesquita Filho) Numerical analysis through CFD of the free convection in a vertical flat plate. W. Fonseca 0315 P-ENTS21 (Faculdade Pitágoras), L. Filho (Universidade Estadual do Maranhão), S. Nascimento (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão) Numerical analysis of heat transfer in a breast considering two cancer types. A. Figueiredo, J. 0602 P-ENTS22 Gomes, L. H. da S. Ignacio, F. Malheiros, G. Guimaraes (Universidade Federal de Uberlândia) Thermal analysis with experimental validation of power transformers. A. R. M. de Sousa, W. 0835 P-ENTS23 da S. Fonseca, M. V. A. Nunes (Universidade Federal do Pará), D. de S. Lima (Universidade do Sul e Sudeste do Pará), F. W. S. Conceição (Centrais Elétricas do Norte do Brasil) Experimental and computational simulation of a concentric tubes heat exchanger: thermal 1065 P-ENTS24 effectiveness and numeric model micro fins addition analysis, B. G. Barbosa, E. L. Tolentino, J. Z. Pochmann, F. R. S. Lima (Centro Federal de Educação Tecnológica de Minas Gerais)

94 POSTER SESSION (CONT.) – TUE / 5 Determination of the heat transfer rate and friction coefficient in cross-flow forced 1194 P-ENTS25 convection, L. C. Martinez, F. P. Disconzi, J. V. C. Vargas (Universidade Federal do Paraná) An investigation about the use of a constant absorption cross-section for radiative heat 1448 P-ENTS26 transfer computations in non-uniform CO2 gases, G. de L. Bernardino, A. Maurente (Universidade Federal do Rio Grande do Norte) Numerical evaluation of an enhanced transparent insulation system on a glass-plate cavity, 1493 P-ENTS27 R. P. Garcia, G. Gonçalves, V. L. Scalon (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) CFD analysis of an earth-pipe-air heat exchanger, D. P. Vasconcellos, G. Santos, M. N. 1768 P-ENTS28 Stamoulis (Universidade Tecnológica Federal do Paraná) Numerical efficiency of the GMRES algorithm in heat transfer problems, P. G. Conci, F. A. A. 1905 P-ENTS29 Gomes (Universidade Tecnológica Federal do Paraná) Numerical analysis of natural convection heat transfer on air-cooled finned tubes, R. 2093 P-ENTS30 Nascimento, S. Souza (Universidade Federal do Rio Grande do Norte) Absolute instability of mixed convection in a heated horizontal porous channel, N. R. Braga 2458 P-ENTS31 Jr, P. V. Brandão, L. A. Sphaier, L. S. de B. Alves (Universidade Federal Fluminense) Estimation of the thermal conductance at the contact interface of a laminated composite with the unscented Kalman filter, L. Florindo (Universidade Federal do Espírito Santo), L. 2568 P-ENTS32 Abreu, D. Knupp (Universidade Estadual do Rio de Janeiro), J. C. S. Dutra, W. B. da Silva (Universidade Federal do Espírito Santo) Simulation of casting process of marine propellers, H. Santana, E. Lins (Universidade Federal 2657 P-ENTS33 do Pará) Analysis of the thermal properties of the sodium and potassium nitrate as heat exchanger in 2766 P-ENTS34 a heliothermic power plant, F. Goes, E. Santos, W. Felix (Universidade Tiradentes), W. Nascimento (Instituto Tecnológico de Aeronáutica), A. Primo (Universidade Tiradentes) Radiation calculations on fluent CFD: three approaches for the weighted-sum-of-gray-gases 2928 P-ENTS35 model, L. G. P. Rodrigues, A. Ziemniczak, F. França (Universidade Federal do Rio Grande do Sul) FLMR - Fluid Mechanics and Rheology CODE Computational Fluid Dynamics Numerical analysis of the air flow in intake manifolds of internal combustion engines, A. M. 1132 P-FLMR26 Souza, H. S. Souza, T. B. da Silva, K. Nabbout (Universidade Federal de Uberlândia) Influence of electrode flow channel changes on the efficiency of polymer electrolyte fuel cell, 1479 P-FLMR27 T. Moreno, R. P. da Silva, M. Laviola (Universidade Federal Fluminense), C. F. Campos (Centro Universitário de Volta Redonda), F. J. B. Brum (Universidade Federal Fluminense) Influence of the modification of anode a PEM type fuel cell, R. P. da Silva, T. Moreno 1550 P-FLMR28 (Universidade Federal Fluminense), C. F. Campos (Centro Universitário de Volta Redonda), F. J. B. Brum (Universidade Federal Fluminense) Numerical simulation of pollutant dispersion in the atmosphere, L. M. D. Okamoto, G. 1519 P-FLMR29 Naozuka, N. Romeiro, E. Cirilo, P. L. Natti (Universidade estadual de Londrina) A hyperbolic - regularized Casson model for pulsatile blood flow simulation in a rigid artery, 1545 P-FLMR30 F. Martelli, P. Silva, E. Macêdo (Universidade Federal do Pará) Numerical simulation of the two-dimensional incompressible flow around elliptic cylinders 1731 P-FLMR31 using the vortex method, R. Pereira (Centro de Pesquisas de Energia Elétrica) Computational study of the wind flow in diffuser augmented, R. S. Pereira, S. Santos, F. C. L. 1739 P-FLMR32 de Sousa, K. P. M. de Oliveira (Universidade Federal de Mato Grosso) Experimental and numerical analysis of underexpanded jet, D. Jorge , M. M. Vieira, T. 1752 P-FLMR33 Moraes, D. Maionchi, E. Silva, R. L. da Silva (Universidade Federal da Grande Dourados) Numerical analysis of enthalpy of a compressible flow over a flat plate, R. M. Ramoni, M. 1812 P-FLMR34 Lourenço (Universidade Tecnológica Federal do Paraná) Non-orthogonal components analysis of the permeability tensor in RTM reinforced medium, 1832 P-FLMR35 C. Oliveira, C. M. B. Dutra, L. L. Soares, J. A. Souza (Universidade Federal do Rio Grande - FURG), S. Amico (Universidade Federal do Rio Grande do Sul) Computational study of the wind flow in convergent-divergent nozzle, F. C. L. de Sousa, S. 1907 P-FLMR36 Santos, R. S. Pereira , K. P. M. de Oliveira (Universidade Federal de Mato Grosso) Numerical and experimental analyses of heat transfer by natural convection on flat inclined 1955 P-FLMR37 plates, J. G. G. de Oliveira, E. Cornils, T. Oliveira (Universidade de Brasília) Use of CFD tools for benchmarking of wind turbines design, A. Barros, F. A. F. Câmara, S. 2137 P-FLMR38 Souza (Universidade Federal do Rio Grande do Norte)

95 POSTER SESSION (CONT.) – TUE / 5 Computational analysis using CFD on performance of a centrifugal pump impeller, A. R. A. 2217 P-FLMR39 Bezerra, S. Souza, A. B. B. Araujo (Universidade Federal do Rio Grande do Norte) Application of computational fluid dynamics (CFD) analyzing aerodynamic car models: 2243 P-FLMR40 examples didactic, L. de L. Freire, A. K. C. de Araújo, M. Furukava (Universidade Federal Rural do Semi-árido) Analysis of the high temperature effect in conical nozzle, B. C. Lima, J. F. de A. Martos 2253 P-FLMR41 (Instituto Tecnológico de Aeronáutica), P. Toro, I. Rêgo (Instituto de Estudos Avançados), S. N.P. Laitón (Instituto Tecnológico de Aeronáutica) Use of gamma theta model to determine the aerodynamic characteristics of NACA 23012 2283 P-FLMR42 airfoil, A. Barros, F. A. F. Câmara, S. Souza (Universidade Federal do Rio Grande do Norte) Forced turbulent convection around ribbed spinning cylinders based on Magnus effect, P. M. 2350 P-FLMR43 Guimarães, P. Silva, A. L. Torres (Universidade Federal de Itajubá) Numerical behavior of the discontinuous Galerkin method in incompressible fluid flow 2592 P-FLMR44 simulations for low Reynolds number, F. J. da Silva, F. A. A. Gomes, P. R. Novak, A. Q. Garcia, M. B. Hecke (Universidade Federal do Paraná) Analysis of the independence of the mesh refinement in a three-dimensional numerical 2603 P-FLMR45 simulation of a vertical thermal tank, G. A. A. Moreira (Universidade Federal da Paraíba) Numerical and experimental analysis of the aerodynamic behavior of a road bus in a wind 2605 P-FLMR46 tunnel, G. Rech, C. Altafini, C. A. Costa (Universidade de Caxias do Sul) Effects of the volute casing design on the characteristics of centrifugal pump, R. A. M. 2680 P-FLMR47 Carrillo, C. E. C. Rodriguez, L. Queiroz, M. Fonseca, B. Mariano (Universidade Federal de Itajubá) Exergy analysis of a low-grade geothermal source driven by an organic Rankine cycle (ORC), 2695 P-FLMR48 C. E. C. Rodriguez, R. A. M. Carrillo, A. Rodriguez, D. Pereira, M. Monteiro (Universidade Federal de Itajubá) Comparative study of bodywork car single seater based on CFD, B. O. Lopes (Universidade 5224 P-FLMR49 Federal de Campina Grande) CODE Multi-phase Flow Gas-solid flow in horizontal pipes with rough and smooth walls, D. N. Venturi, F. Souza 0040 P-FLMR50 (Universidade Federal de Uberlândia) High-order immersed interface method for 2D poisson equation, M. Rojas , L. F. de Souza, J. 0846 P-FLMR51 A. Cuminato (Universidade de São Paulo) Experimental validation by ultrasonic technique of the numerical analysis of an ascendant flow under the influence of the centrifugal and gravitational fields, H. K. Eidt, C. C. 1073 P-FLMR52 Rodrigues, R. Dunaiski, C. Y. Ofuchi, P. H. D. dos Santos, F. Neves-Jr, R. Morales (Universidade Tecnológica Federal do Paraná) Analysis of pressure drop on boiling of propane in MPE tube, P. F. da Silva, J. de M. Patzlaff, 1130 P-FLMR53 J. Copetti (Universidade do Vale do Rio dos Sinos), J. D. de Oliveira (Universidade Federal de Santa Catarina) Mathematical modeling and experimental analysis for the elongated bubble shape in two- 1223 P-FLMR54 phase slug flow, M. Weiland, C. Cozin , R. Rodrigues, M. G. Conte, F. A. Barbuto, R. Morales (Universidade Tecnológica Federal do Paraná) Study of the pipe diameter effect on horizontal air-water two-phase flow, F. J. da Silva, G. G. 1591 P-FLMR55 da Silva, S. Vieira, M. S. de Castro (Universidade Estadual de Campinas) Experimental set-up for lost circulation control in fractured channel by particulate flow, C. 1679 P-FLMR56 Schneider, F. C. de Lai, S. Junqueira (Universidade Tecnológica Federal do Paraná) Application of an empirical model to identify stratified gas–liquid flow in the whole range of 1959 P-FLMR57 pipe inclinations, G. Assuncao, J. C. H. Filho, D. Schiozer, M. S. de Castro (Universidade Estadual de Campinas) Procedure for flow regime identification of dispersed bubbles in a gas-liquid mixture flowing 1971 P-FLMR58 in vertical pipes, L. E. M. Lima, G. M. Assis, L. E. M. Lima (Universidade Tecnológica Federal do Paraná) Conductive probe and image technique for the study of slug flow hydrodynamics, I. dos 1990 P-FLMR59 Santos, A. Serrao, M. Silva (Universidade Federal do Pará) Uncertainty analysis of air-water flow in residential water meters, J. Souza , T. Amaral, M. 2421 P-FLMR60 Silva, F. Silva, L. Braga, D. Felipe, A. Linhares (Universidade Federal do Pará) Development of a measurement and monitoring system of void fraction in slug flow, F. Silva, 2452 P-FLMR61 I. dos Santos, A. Serrao, M. Silva, L. Braga, J. Souza, P. H. P. Silva (Universidade Federal do Pará) The influence of geometry on the Young-Laplace method, A. Zabot (Universidade Federal de 2563 P-FLMR62 Santa Catarina)

96 POSTER SESSION (CONT.) – TUE / 5 Experimental study of a binary mixture of sugarcane bagasse and sand on a bubbling 2728 P-FLMR63 fluidized bed, F. M. P. Balestieri, I. Ávila, C. M. R. Luna (Universidade Estadual Paulista), G. L. A. A. Ferrufino (Instituto Nacional de Pesquisas Espaciais) Analysis of fluid dynamics behavior in response to thrust runner geometry in vertical sleeve 2838 P-FLMR64 bearing, T. Casanova, G. C. Storti, L. Schemmer (WEG Equipamentos Elétricos S.A) Numerical simulation of particulate flow for static mud cake process over heterogeneous 5950 P-FLMR65 porous media, G. H. de Lima, F. C. de Lai, S. Junqueira (Universidade Tecnológica Federal do Paraná) MMEN - Materials and Manufacturing Engineering CODE Metallurgical Processes Numerical simulation and analysis of the tools radius and different blank holder forces 0929 P-MMEN19 influences on springback, P. S. O. Filho, A. Oliveira, É. F. T. Olivio (Universidade Tecnológica Federal do Paraná) The feasibility to select a welding process based on cost-benefit analysis, D. H. de Almeida 1430 P-MMEN20 (Centro Universitário Central Paulista), R. Vilela, L. Judice, G. Judice (Faculdade Pitágoras) Analysis of coating 410nimo deposited in the ca6nm steel process by welding coated 1779 P-MMEN21 electrode, É. F. T. Olivio, C. de Nardi, A. Oliveira, M. Camargo, P. S. O. Filho (Universidade Federal do Paraná) Evaluation of the surface finish generated in the turning of steel SAE 1020 using insert for 1985 P-MMEN22 aluminum, M. de Oliveira, I. Tomaz, L. A. Júnior (Instituto Federal Fluminense) Comparative study between GMAW-CW and GMAW-EW processes with addition of a cold 2202 P-MMEN23 energized wire, P. P. G. Ribeiro, J. R. dos Reis, M. Fonseca, C. Loayza, P. Assunção, A. A. C. Filho, E. Braga (Universidade Federal do Pará) Lorentz force influence in GMAW with electric wire, P. P. G. Ribeiro, J. R. dos Reis, M. 2277 P-MMEN24 Fonseca, C. Loayza, P. Assunção, E. Braga (Universidade Federal do Pará) Study of double pressure effect on cold sintering of ferrous chips, L. A. Salvalaggio, S. Soares, 2311 P-MMEN25 L. Brandão, L. Resende, A. L. Bierhals (Universidade Federal de Mato Grosso) Study high pressure double effect in the densification of steel chips, A. L. Bierhals, L. Resende, 2325 P-MMEN26 L. Brandão, L. A. Salvalaggio, S. Soares (Universidade Federal de Mato Grosso) Statistical analysis of sheet steel flatness after the insertion of centre buckles, F. J. 2373 P-MMEN27 Kretzschmar (ArcelorMittal Vega), C. A. Carminatti, H. A. Al-Qureshi (Universidade Federal de Santa Catarina) Quenching heat transfer process during nucleate boiling phase by CFD modeling, R. N. 2579 P-MMEN28 Penha (Universidade Federal de Itajubá), L. Canale (Universidade de São Paulo) Comparative analysis of metallographic characteristics of a soldered ASTM A131 naval steel board by the E7018 coated electrode with variation of the cable distance of the electrode, E. 2718 P-MMEN29 M. Santos (Instituto Federal De Educação Ciência E Tecnologia Do Amazonas), A. C. F. de Arruda, C. Quiroz, A. F. P. Tavares (Universidade Estadual de Campinas) Microstructural and oxidation study of silica-based coatings in Nb-Si-B alloys using the 2768 P-MMEN30 HAPC process, N. Storino, J. Goes, M. Zambinat, G. Rodrigues, G. Silva, M. de L. N. M. Melo (Universidade Federal de Itajubá) The influence of different aging on the hardness of the AA7075, L. Albergaria, G. Silva, G. 2835 P-MMEN31 Rodrigues, J. Silva, J. V. Gomes, P. Ciacco, M. C. de Abreu (Universidade Federal de Itajubá) Duplex stainless steel production and study of stress relief treatment, C. S. P. Mendonça, B. 2840 P-MMEN32 G. Andrade, F. Souza, L. Albergaria, C. S. P. Mendonça, A. F. Oliveira, V. Ribeiro, G. Silva (Universidade Federal de Itajubá) Recycling of duplex steel through of powder metallurgy with isostatic press, M. Stanziola, C. 2846 P-MMEN33 S. P. Mendonça, M. de L. N. M. Melo, G. Silva, B. G. Andrade, V. Oliveira (Universidade Federal de Itajubá) CODE Processes with Material Removal Vibration analysis of the 6351-T6 aluminum boring process, A. P. de Lara, M. Polli, M. Avelar 0340 P-MMEN34 (Universidade Tecnológica Federal do Paraná) Quality of machining in the composite of banana stem fiber and polyurethane derived from castor oil, A. Ellenberger, M. Polli (Universidade Tecnológica Federal do Paraná), E. Cristina 0576 P-MMEN35 (Universidade Federal do Paraná), R. de O. dos Santos (Universidade Tecnológica Federal do Paraná) The influence of cutting edge preparation on thrust force and torque in drilling of SAE 0648 P-MMEN36 4144M, M. Polli, M. Santana (Universidade Tecnológica Federal do Paraná) Vibrations analysis in the ball-end milling process, F. F. da Silva (Instituto Federal do 0742 P-MMEN37 Paraná), M. Polli, M. Avelar (Universidade Tecnológica Federal do Paraná)

97 POSTER SESSION (CONT.) – TUE / 5 Analysis of the influence of water temperature, controlled by arduino, in a low cost compact solar desalinizer, R. L. F. Melo (Instituto Federal de Educação, Ciência e Tecnologia do 1091 P-MMEN38 Ceará), J. D. R. Junior (Universidade Federal Rural do Semi-Árido), S. Oliveira (Universidade Federal do Rio Grande do Norte), J. F. Lima (Universidade Federal do Paraná), A. Oliveira (Universidade Federal da Bahia), E. Silva (Universidade Federal Rural do Semi-árido) Influence of the infeed method on tool life and surface finish in austenitic stainless steel 1212 P-MMEN39 thread machining, M. Polli, C. E. Costa (Universidade Tecnológica Federal do Paraná) Obtaining and characterizing a polyester resin compound with fiberglass and pet, A. C. B. Zancanella (Universidade Federal do Espírito Santo), C. H. dos S. Cosme, J. Macete, M. dos 1319 P-MMEN40 Santos, R. Fraislebem, R. Maziero, B. C. Bragança, A. P. de Barros, I. Belisario (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo) Surface improvement of AISI H13 steel through the addition of silicon powder suspended in 1501 P-MMEN41 dielectric during the process of electrical discharge machining, C. A. O. Luzia, F. L. Amorim, C. A. H. Laurindo (Pontifícia Universidade Católica do Paraná) Evaluation of plunge cylindrical grinding of AISI 4340 steel under the application of the minimum quantity lubrication coolant technique assisted with wheel cleaning system, E. C. Bianchi (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru), R. L. 1589 P-MMEN42 Rodriguez (Universidade Estadual Paulista Julio de Mesquita Filho), R. Hildebrandt, J. C. Lopes, H. J. de Mello, P. Aguiar (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) Study between down-milling and up-milling in ABNT 1020 steel surface finish, M. Almeida, 1658 P-MMEN43 M. Câmara (Universidade Federal de Minas Gerais), D. H. do N. Viola, M. F. de S. Moreira (Centro Universitário Newton Paiva) Production and characterization of sr2alzro5,5 ceramics to encapsulate temperature sensors in the petroleum extraction industry, R. Domingues (Universidade Federal de Pernambuco), 1661 P-MMEN44 A. Sousa (Instituto Federal de Pernambuco), M. B. Padilha, R. A. S. Ferreira, Y. P. Yadava, R. Domingues (Universidade Federal de Pernambuco) Evaluating the grinding of AISI 4340 interrupted workpieces under abundant cooling method, using a CBN grinding wheel, E. C. Bianchi, L. O. B. de S. Alves, G. E. Torrento, J. C. Lopes, R. S. Volpato, H. J. de Mello, P. Aguiar (Universidade Estadual Paulista - Faculdade de 1683 P-MMEN45 Engenharia de Bauru), R. L. Rodriguez (Universidade Estadual Paulista Julio de Mesquita Filho), L. de M. Fernandes, B. Sato (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) CAD/CAM software analysis: comparison, performance and application in a manufacturing 2034 P-MMEN46 process, N. V. Le Sénéchal (Universidade Estácio de Sá), G. S. Rodrigues (Pontifícia Universidade Católica do Rio de Janeiro) Use of finite element method to validate the temperature field of a 5-axis machining center, M. Santos (Escola Politécnica da Universidade de São Paulo), E. C. Bordinassi (Centro 2666 P-MMEN47 Universitário do Instituto Mauá de Tecnologia), G. Batalha (Escola Politécnica da Universidade de São Paulo) Turning of hardened AISI 4340 steel using coated carbide tool, M. Alves (Universidade 2679 P-MMEN48 Estadual Paulista Júlio de Mesquita Filho), J. Miguel (UNESP - Campus de Guaratinguetá), M. Ribeiro, J. Souza, M. Kondo (Universidade Estadual Paulista Júlio de Mesquita Filho) Low-cost syringe pump design modification for minimum quantity of lubrication system 2717 P-MMEN49 application, A. Nakazato, M. O. FIlho, M. Kondo, M. Alves, L. Hein (Universidade Estadual Paulista Julio de Mesquita Filho) Circularity vs taper in micro-drilling with pulsed Nd:YAG, D. F. S. Junior (Instituto Federal de 2760 P-MMEN50 Educação, Ciência e Tecnologia de Mato Grosso) Evaluation of surface roughness in low frequency vibration turning of ABNT-1020 carbon 2804 P-MMEN51 steel, C. P. Lopes (Pontifícia Universidade Católica de Minas Gerais), A. N. D. Lopes, J. Pereira, W. C. de Oliveira (Centro Federal de Educação Tecnológica de Minas Gerais) Application of the maskless electrochemical texturing method in the reduction of friction and 2915 P-MMEN52 wear of the gray cast iron, L. R. R. da Silva, H. Costa (Universidade Federal do Rio Grande - FURG) Torque analysis on rolled and machining threads processes, D. Rodrigues, F. O. Neves 5025 P-MMEN53 (Universidade Federal de São João del Rei)

98 POSTER SESSION (CONT.) – TUE / 5 QUSM - Quantification of Uncertainty and Stochastic Modeling CODE Quantification of Uncertainty and Stochastic Modeling The interval eigenvalue problem for vibrating systems, F. S. de Oliveira (Universidade 0183 P-QUSM1 Federal de Itajubá) A shear test measurement system analysis in a resistance spot welding using multivariate 2313 P-QUSM2 GR&R, F. Almeida, R. C. Sabioni, V. de Paula, G. F. Gomes, J. H. de F. Gomes(Universidade Federal de Itajubá) Wind shear evaluation in the “Brazilian developments on the regional atmospheric modeling system” - BRAMS - compared to established references and to measured wind velocity data 2594 P-QUSM3 at three heights in three locations, R. M. Dutra (Centro de Pesquisas de Energia Elétrica), A. Neiva (Universidade Estadual de Campinas), V. Guedes (Centro de Pesquisas de Energia Elétrica), A. A. M. Cabrera (Pontifícia Universidade Católica do Rio de Janeiro) . SOLM - Solid Mechanics CODE Constitutive models Mathematic modelling of a shape memory alloy actuator, M. Orsi, G. Abreu (Universidade 1040 P-SOLM14 Estadual Paulista Julio de Mesquita Filho) Mechanical behavior of elastomers under uniaxial tensile tests assisted by digital image 2861 P-SOLM15 tracking, H. O. H. Natori (Universidade de São Paulo), K. Meira, C. C. de Melo, R. B. Canto (Universidade Federal de São Carlos), R. A. Angélico (Universidade de São Paulo) Rubber bushing hyperelastic behavior based on shore hardness and uniaxial extension, D. 5280 P-SOLM16 Lalo, M. Greco (Universidade Federal de Minas Gerais) CODE Failure Criteria Preliminary studies in the computational modeling of a safety valve used in the offshore 1106 P-SOLM17 industry, M. Silva (Centro Universitário UDF), L. L. D. Morales, A. Nepomuceno (Universidade de Brasília) Vibration analysis for defective diagnosis in rotary machines,A. Carvalho (Universidade Federal Rural do Semi-árido), R. L. F. Melo (Instituto Federal de Educação, Ciência e Tecnologia do Ceará), J. D. R. Junior (Universidade Federal Rural do Semi-Árido), A. 1843 P-SOLM18 Oliveira (Universidade Federal da Bahia), J. F. Lima (Universidade Federal do Paraná), E. Silva (Universidade Federal Rural do Semi-árido), S. Oliveira (Universidade Federal do Rio Grande do Norte)

99 POSTER SESSION WED / 6 AERO – Aerospace Engineering CODE Flight Dynamics Modeling and frequency domain identification of a satellite mockup, A. F. Coelho, L. B. D. E. 2013 P-AERO23 Rosa (Instituto Federal de Educação, Ciência e Tecnologia Fluminense), R. Santos (Instituto Tecnológico de Aeronáutica) Nanosats’ behavior hardware in the loop simulator under earth’s low orbit magnetic field, 2175 P-AERO24 LEO, C. Cordeiro, J. E. M. Mothé (Instituto Federal de ciência e tecnologia Fluminense) Modelling, simulation and control of a fixed-wing unmanned aerial vehicle (UAV), W. R. Silva 2703 P-AERO25 (Universidade Federal de Santa Maria), A. L. da Silva (Universidade Federal de Santa Maria), H. Grundling (Universidade Federal de Santa Maria) CODE Propulsion Analysis and mathematical modeling of the electric thrust system of a quadcopter to obtain 1239 P-AERO26 flight performance criteria, F. B. Pacheco, R. Lago , D. R. R. Guilhon (Universidade Estadual do Maranhão) Evaluation of the effect of ozone addition on the methane/oxygen combustion in a lpre 1627 P-AERO27 using cfd analysis, F. Neto (Universidade Federal do Pará), R. Gonçalves (Instituto Tecnológico de Aeronáutica) Study of the aerodynamic heating of the stagnation point and the blunt section of brazilian 2149 P-AERO28 hypersonic aerospace vehicle 14-X S, A. M. P. Lara (Instituto Tecnológico de Aeronáutica), I. Rêgo, P. Toro (Instituto de Estudos Avançados) Utilization of an arduino® microcontroller for dynamic thrust measurement of a powertrain 2484 P-AERO29 assembly used in a sae aero design aircraft, G. Diniz, P. A. N. de Carvalho, M. B. de Moura, G. Fin, P. B. N. da Silva, M. Duarte, Z. Vilar (Universidade Federal Rural do Semi-Árido) Synthesis and evaluation of a tubular catalytic reactor for micropropulsion applications, G. E. 2609 P-AERO30 Coelho, C. Jr. Velho, R. de C. Catapan (Universidade Federal de Santa Catarina) Optical design for laser propulsion system, B. Ferreira (Faculdade de Tecnologia de São José 2683 P-AERO31 dos Campos), P. Toro (Instituto de Estudos Avançados), F. da Costa (Instituto Tecnológico de Aeronáutica) COMB – Combustion and Environmental Engineering CODE Environmental Engineering Development of an automated prototype for monitoring of microalgae cultivation in 0461 P-COMB30 photobioreactor, T. Francesconi, M. Rudek, O. Canciglieri Jr (Pontifícia Universidade Católica do Paraná), B. Miyawaki, T. C. de Mello (Universidade Federal do Paraná) Full factorial design applied to removal copper ions from soil, N. Kaminari, A. Baggio, L. 0607 P-COMB31 Munhoz (Pontifícia Universidade Católica do Paraná) Analysis of CO2 generation in portland cement production, G. P. Tavares, R. J. Silva, M. D. 1111 P-COMB32 Ramos (Universidade Federal de Itajubá), Activation time effect on activated carbon from coconut shell to enhance CO2 adsorption, W. 1340 P-COMB33 Galdino, J. Silva, D. Santos, A. F. Bezerra, A. S. Rumão, E. Jaguaribe (Universidade Federal da Paraíba) An OBD-II based vehicular data tracking system for fuel consumption and emissions improvement, B. Murta, H. Guimarães, V. Silva(Universidade Federal de Minas Gerais), L. C. 1451 P-COMB34 Sales (Pontifícia Universidade Católica de Minas Gerais), A. Maia (Universidade Federal de Minas Gerais) Prototype units to address emerging contaminants and e. coli in wastewater via 1689 P-COMB35 photodynamic inactivation, P. S. Uliana Jr, M. P. de M. Fiuza, K. R. A. Vieira, R. de C. Cruz, B. M. Soares, M. Sesselmann (Universidade Federal de Minas Gerais) Effects of inertization process in confined spaces with apllication in the aeronautical industry, E. S. R. Escalante (Universidade Estadual Paulista Julio de Mesquita Filho), C. J. R. Coronado 2788 P-COMB36 (Universidade Federal de Itajubá), E. V. Canettieri, J. Carvalho (Universidade Estadual Paulista Julio de Mesquita Filho) Socio-environmental advantages in wind microgenation, S. Queiroz, P. Celestino, I. de S. 2909 P-COMB37 Queiroz Jr (Universidade Federal Rural do Semi-Árido), I. B. de Almeida, C. A. de Oliveira (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte)

100 POSTER SESSION (CONT.) – WED / 6 DYNM – Dynamics, Control, Vibrations and Acoustics CODE Rotordynamics The problem in the simplified consideration of discs in the rotor dynamics of large machines, 0009 P-DYNM18 L. Fonçatti, D. R. Voltolini (WEG Equipamentos Elétricos) The influence of the bearing angular stiffness in rotordynamics, T. da Silva, L. Bortolotto, F. J. 1326 P-DYNM19 Doubrawa Filho, C. A. Bavastri (Universidade Federal do Paraná) Wind turbine faults monitoring by vibration analysis, P. Farias (Universidade Federal do Rio 1903 P-DYNM20 de Janeiro), G. A. do P. Campos (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), M. R. Farias (Universidade Estadual do Rio de Janeiro) Dynamic behavior of viscoelastic rotors – a comparative analysis, P. Farias (Universidade 2408 P-DYNM21 Federal do Rio de Janeiro), G. A. do P. Campos (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), M. R. Farias (Universidade Estadual do Rio de Janeiro) CODE Structural dynamics Vibrational analysis of cracked Hooks, E. Janssen, E. Farinazzo (Universidade Positivo), M. 0564 P-DYNM22 Oliveira Filho (Universidade Federal do Paraná) Unconventional numerical method to approach the free and forced vibration in 0647 P-DYNM23 axisymmetric revolution shells, G. Dal Bó, O. A. G. de Suarez (Universidade de Caxias do Sul), R. Rossi (Universidade Federal do Rio Grande do Sul) Vibration analysis of wind turbine bearing based on information theory quantifiers, V. Silva (Universidade Federal de Pernambuco), G. de N. P. Leite (Instituto Federal de Educação, 0744 P-DYNM24 Ciência e Tecnologia de Pernambuco), A. M. Araújo (Universidade Federal de Pernambuco) Design and analysis by finite elements of a base for a reciprocating compressor, M. H. Takahama, H. Rissá, H. Blaz (Universidade Tecnológica Federal do Paraná), F. T. Santos 1123 P-DYNM25 (Universidade Federal de Santa Catarina), A. Borges (Universidade Tecnológica Federal do Paraná) Experimental dynamic evaluation of cotton fiber composite material, F. Eloy, A. Ancelotti, A. 1544 P-DYNM26 Ribeiro, B. Rennó (Universidade Federal de Itajubá) Study and Development of the vane for a new pneumatic motor-compressor, V. G. P. Siston, 1943 P-DYNM27 G. A. do P. Campos (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Use of lamb waves to detect damage to metal beams, A. P. L. da Silva Jr, P. R. Novak 2192 P-DYNM28 (Universidade Tecnológica Federal do Paraná) HVAC duct system modeling through the component mode synthesis for structural vibration 2738 P-DYNM29 analysis, J. M. B. Ordoñez, M. Nunes (Universidade de Brasília) Efficiency optimization of freight wagon brake rigging, S. Ferreira, A. Gomes, P. Proença, F. J. 2847 P-DYNM30 F. Lopes (Pontifícia Universidade Católica de Minas Gerais), C. Vimieiro (Universidade Federal de Minas Gerais) ENTS – Energy and Thermal Sciences CODE Biofuels and Alternative Energy Aerodynamic design analysis of a hybrid vertical wind turbine for decentralized power 0099 P-ENTS36 generation, J. V. Akwa (Universidade Federal do ABC), C. E. G. Falcão (Universidade Federal de Santa Maria) Experimental Analysis of a Small Engine-Generator Group Operating on Diesel-Ethanol by 0144 P-ENTS37 Fumigation Method, G. D. Telli, C. Altafini (Universidade de Caxias do Sul), J. Rosa (Universidade Federal do Rio Grande do Sul) Commercial central tower power plants: a brief review, G. I. M. Tapia, P. A. B. F. de Sousa 0152 P-ENTS38 (Universidade Federal do Rio Grande do Norte) Performance Analysis and Economics of a Grid Connected PV System 2.2 kwp in State of Ceara - Brazil, F. H. B. de L. Morais, L. C. de Lima, L. Ferreira, L. Dolibaina , R. E. B. de Souza 0160 P-ENTS39 (Universidade Estadual do Ceará), Francisco Kleber de A. Lima (Universidade Federal do Ceará) Analysis of Weibull parameters for wind power generation, L. I. de Andrade , O. D. Q. de Oliveira Filho, A. M. Araújo, A. A. C. Silva, C. C. de A. Bezerra, E. C. R. Fernandes, E. J. 0364 P-ENTS40 Fernandes, G. J. A. M. Rocha, W. F. A. Borges (Universidade Federal de Pernambuco), D. G. Ribeiro (Universidade Federal de São Carlos) PV characterization using capacitive load, E. Peñaranda, P. Andrade, E. Bandarra Filho 0486 P-ENTS41 (Universidade Federal de Uberlândia) Theoretical and experimental analysis of the squirrel-cage induction generator, M. Augusto, 0614 P-ENTS42 T. C. B. N. Assunção, J. Andrade, J. T. Assunção (Universidade Federal de São João del Rei)

101 POSTER SESSION (CONT.) – WED / 6 Photobioreactor inoculation with swine sewage for microalgae cultivation, G. Finger, J. G. B. 0634 P-ENTS43 Martinez, Y. Kovara, A. Gonçalves, I. Costa, D. M. Taher, J. V. C. Vargas, A. Mariano (Universidade Federal do Paraná) Combined solar-biomass steam generation for using in a poultry slaughterhouse system, T. 0646 P-ENTS44 G. Almeida, E. Bazzo (Universidade Federal de Santa Catarina), K. Fagnani (C.Vale Agroindustrial), E. Burin (Universidade Federal do Paraná) Exergetic analysis of a photovoltaic plate for various angulations for the climate of São Luís- 0686 P-ENTS45 Ma, E. M. da S. Costa, R. S. Andrade, Lourival Filho (Universidade Estadual do Maranhão) Energetic analysis of a photovoltaic panel for different angles of inclination in the city of São 0785 P-ENTS46 Luis-MA, Brazil, R. S. Andrade, E. M. da S. Costa, L. Filho (Universidade Estadual do Maranhão) Financial impact on a cement plant in the coprocessing of meat and bone meal, R. Lima, R. 0794 P-ENTS47 Carpio (Instituto Federal Minas Gerais ) Analysis of the effect of the mat in aircraft on the production of power in Macao wind farm, 0827 P-ENTS48 G. I. M. Tapia, F. Pontes (Universidade Federal do Rio Grande do Norte) 5 MW and 2 MW NREL wind turbines simulation comparison for steady loading calculations, A. A. C. Silva, C. L. dos Santos, S. Diogenes, A. M. Araújo, E. C. R. Fernandes, C. C. de A. 0834 P-ENTS49 Bezerra, W. F. A. Borges, E. C. Calheiros, L. I. de Andrade (Universidade Federal de Pernambuco), C. R. Ferreira (Universidade Estadual do Sudoeste da Bahia) Performance analysis of an internal combustion engine powered by gasoline and hydrogen, 1135 P-ENTS50 A. M. Souza, P. C. R. da Cunha, P. de F. Martins, L. G. M. Vieira, J. A. F. Borges, J. J. R. Damasceno (Universidade Federal de Uberlândia) Thermo-hydraulic calculation in CSP systems using the finite volume method, G. da S. Lima, 1138 P-ENTS51 G. I. M. Tapia (Universidade Federal do Rio Grande do Norte) Heliostat field simulation in a solar tower power plant, M. P. de Lima, G. I. M. Tapia 1139 P-ENTS52 (Universidade Federal do Rio Grande do Norte) Consumption study of diesel engine system using biodiesel, J. P. Gutierrez, R. Pereira, I. de 1196 P-ENTS53 souza (Universidade Federal Fluminense) Analysis of parameters that influence the performance of heliostats in central tower 1227 P-ENTS54 technology, G. I. M. Tapia, I. Medeiros (Universidade Federal do Rio Grande do Norte) Mathematical model for the thermal-hydraulic calculation in a fresnel linear reflector system, 1231 P-ENTS55 G. I. M. Tapia, E. Cordeiro, G. I. M. Tapia (Universidade Federal do Rio Grande do Norte) Comparative study of different models for calculation of dni to application in CSP 1403 P-ENTS56 technologies, G. I. M. Tapia, G. da S. Lima, A. de O. Souza (Universidade Federal do Rio Grande do Norte) Review on market trends and syngas usability in fuel cells, Elise Watzko, Evandro Cardozo 1478 P-ENTS57 da Silva (Universidade Federal de Santa Catarina), Lauber Martins (Andrews University), Elaine Virmond, Guilherme Santos, Elise Watzko (Universidade Federal de Santa Catarina) Development of a fixed bed adsorption system that operates in PSA / TSA mode for 1541 P-ENTS58 adsorption and production of purified hydrogen from the synthesis gas, I. S. Cruz, J. F. Alves, F. N. A. Freire, W. Barcellos, W. C. Araújo (Universidade Federal do Ceará) Evaluation of biogas production from swine manure through continuous reactor, T. C. de 1960 P-ENTS59 Mello, J. V. C. Vargas, W. Balmant, B. Miyawaki (Universidade Federal do Paraná), T. Francesconi (Pontifícia Universidade Católica do Paraná) Advantages and economic feasibility of Stirling engines as a distributed generation source 2105 P-ENTS60 and cogeneration technology – a brief review, Gabriel Ivan Medina Tapia, M. A. Delgado Filho, N. M. da F. T. de S. Araújo, F. P. Maia (Universidade Federal do Rio Grande do Norte) A study on the use of agricultural residues plantain productions in Nicaragua for the 2194 P-ENTS61 generation of electricity, C. A. B. Schutze (Universidade Estadual de Campinas) Hybrid electric power generator (photovoltaic – fuel generator) for remote areas, C. V. P. 2279 P-ENTS62 Costa Jr, K. Martins, A. S. de Alencar, G. H. S. Oliveira, E. Martins, I. F. B. da Silva, K. Barbosa, M. da S. Serejo (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão) Development of an experimental BFT stand, F. C. B. D. Pantoja, Y. Nakamura (Universidade 2654 P-ENTS63 Estácio de Sá) Lubricant lifespan of a Diesel engine fueled with preheated crambe oil, B. M. Bomfati (Universidade Estadual de Ponta Grossa), H. C. Delalibera (Instituto Agronômico do Paraná 2699 P-ENTS64 ), L. R. Higashibara (Universidade Estadual de Londrina), P. H. W. Neto (Universidade Estadual de Ponta Grossa) Solar cooker for food baking (solar grill), L. Souza, L. G. V. M. de Souza, M. A., K. Fontes 2743 P-ENTS65 (Universidade Federal do Rio Grande do Norte), M. V. S. dos Santos (Universidade Federal do Vale do São Francisco)

102 POSTER SESSION (CONT.) – WED / 6 Study of low cost solar oven manufactured from a television packaging, L. Souza, L. G. V. M. 2746 P-ENTS66 de Souza, M. Andrade, M. Oliveira, K. Fontes, M. V. S. dos Santos (Universidade Federal do Vale do São Francisco) Manufacture and study of a water heating system using solar collector of absorbing grid 2750 P-ENTS67 formed with pvc tubes in series-parallel configuration, L. Souza, E. Silva, L. G. V. M. de Souza, W. Silva, K. Fontes (Universidade Federal do Rio Grande do Norte) Oven Solar for baking food manufactured with MDF, L. Souza, M. C. de O. Spinelli, L. G. V. 2753 P-ENTS68 M. de Souza, A. G. Cavalcante, K. Fontes (Universidade Federal do Rio Grande do Norte) Manufacture and study of solar water heating system using an absorbing grid collector with PVC tubes in the parallel configuration, L. Souza (Universidade Federal do Rio Grande do 2754 P-ENTS69 Norte), A. Oliveira (Instituto Federal de Educação Ciência e Tecnologia do Rio Grande do Norte - Campus Natal central), L. G. V. M. de Souza, A. G. Cavalcante, K. Fontes (Universidade Federal do Rio Grande do Norte) FUEL CELL: Feasibility analysis of its application in automobiles, R. Gontijo, L. Marzano, A. 2831 P-ENTS70 Rezende (Pontifícia Universidade Católica de Minas Gerais) A software for calculation of costs and operation of a small wind power plant, L. R. R. 2862 P-ENTS71 Ribeiro, L. Sousa (Instituto Federal de Educação, Ciência e Tecnologia do Ceará) FIVB - Flow Induced Vibration CODE Flow Induced Vibration Numerical and experimental analysis of the Influence of pipe fittings on the turbulence- 0844 P-FIVB1 induced vibration, T. Bento, D. Lannes, R. M. Moreira, A. Gama (Universidade Federal Fluminense) FLMR - Fluid Mechanics and Rheology CODE Rheology and Non-Newtonian Fluid Mechanics Rheological Behavior of a chitosan/xanthan gum hydrogel, L. M. Dutra, A. Costa, E. E. 1548 P-FLMR66 Garcia-Rojas (Universidade Federal Fluminense) Drag reduction with polymer addition in Taylor-Couette flow with Taylor instabilities, I. M. 2406 P-FLMR67 da Silva, E. Soares (Universidade Federal do Espírito Santo), R. Siqueira, R. Andrade (Universidade Federal de Minas Gerais) CODE Theoretical and Analytical Modeling Pressure, Flow Rate and Head Loss Analysis on Multiple Parallel Flow Systems by 1537 P-FLMR68 Computational Approach, J. L. L. Soares, G. S. Q. de Oliveira, M. L. S. Silva, S. Silva, G. Stieven (Universidade Federal do Pará) CODE Instrumentation and Experiments Design of a wind tunnel of the suckdown type for didactic tests, W. Fonseca, C. Oliveira, J. R. 0221 P-FLMR69 Silva, E. Pinheiro, I. S. V. Arcos (Faculdade Pitágoras) Study and experimental analysis of hydraulic fluids compressibility with different viscosities, 0408 P-FLMR70 F. R. de Souza, L. F. P. Scalabrin, M. N. E. Reis (Pontifícia Universidade Católica de Minas Gerais) Development of a low cost pyranometer for solar radiation measurements, M. Ito, V. L. 0524 P-FLMR71 Scalon, E. Avallone, C. Pansanato (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) Analytical solution of the diffusion equation applied to the drying of ceramic tiles, L. F. 0650 P-FLMR72 Araújo, V. S. O. Farias, W. P. da Silva, C. M. R. Franco, H. B. de Azevedo, A. F. da S. Junior (Universidade Federal de Campina Grande) Canal prototype for teaching and research in fluid dynamics using fluoresceine, water and alcohol solution as a working fluid wth phenolftaleine and ammonia solution for 0671 P-FLMR73 visualization with black light, J. S. G. de Moura, M. da G. Braz, D. Moiseyev, D. Lobato Bernardes, G. Faria, J. S. G. de Moura, M. T. C. Caldeira (Universidade Fumec) Numerical and experimental analysis for performance improvement of the admission 0764 P-FLMR74 restrictor for a formula-sae vehicle, A. Rocha, E. da . Marcelino, L. Correia, R. Duarte (Universidade Federal de Campina Grande) Numerical and experimental study of pressure loss at the intake manifold of a formula-SAE 0766 P-FLMR75 vehicle, E. da T. Marcelino, A. Rocha, L. Correia, R. Duarte (Universidade Federal de Campina Grande) Study of grape seed oil in the proposal of biolubricants in open systems, A. do A. D. G. Serra, 1315 P-FLMR76 T. Paixão, I. Ferreira, J. A. N. A. da S. Brasil, P. R. R. Filho (Universidade Estadual do Maranhão)

103 POSTER SESSION (CONT.) – WED / 6 Study of lubrication of castor / linseed vegetable oils through drip lubricated contact wear 1377 P-FLMR77 test, T. Paixão, A. do A. D. G. Serra, I. Ferreira, P. R. R. Filho (Universidade Estadual do Maranhão) Study of hydrate formation in transient conditions, C. Kakitani, D. C. Marques, M. M. Neto, 1597 P-FLMR78 R. Morales, A. Sum (Universidade Tecnológica Federal do Paraná) Optical probes development for flow measurement, L. Braga, H. Pereira, F. Silva, J. Souza, T. 2480 P-FLMR79 Silva, C. Fernandes, J. Costa, M. Silva (Universidade Federal do Pará) CODE Industrial Applications and Turbomachinery Project of a tangential flow machine of simplified manufacturing, R. Garcia (Universidade Federal do Rio Grande do Sul), C. H. Lagemann (Universidade do Vale do Taquari), L. 0693 P-FLMR80 Hermany (Universidade de Santa Cruz do Sul), G. Lago, J. D. I. Silveira, G. Diehl (Centro Universitário UNIVATES), R. C. Izquierdo (Universidade Federal do Rio Grande do Sul) Study of dimensional parameters influence on vortex tube behavior, F. P. Branco (Instituto 1165 P-FLMR81 Federal do Mato Grosso do Sul), F. Montanare, E. D. Buchelt, D. Laporte, B. Rosa (Universidade Católica Dom Bosco) Modelling, control and measurement of pelton hydraulic turbine: a laboratory case of study, 1323 P-FLMR82 F. P. Branco (Instituto Federal do Mato Grosso do Sul), M. Willian, J. C. O. de S. Lescano, F. Montanare, B. Rosa, D. Laporte (Universidade Católica Dom Bosco) HVAC - Heating, Ventilation, Air-Conditioning and Refrigeration CODE HVAC Air conditioning system: computational numerical analysis, E. M. Ferreira, L. U. Tramontano, 2076 P-HVAC1 R. R. Sousa (Universidade Federal da Grande Dourados) Viabilitity study of an absorption chiller for the climatization of a shopping center in 2858 P-HVAC2 Teresina, Piauí, A. L. F. Leite, C. Cezar, C. A. Santos (Universidade Federal da Paraíba) Measurement uncertainties calculation in the cooling capacity determination of split air 2926 P-HVAC3 conditioners by the air-enthalpy methodology, L. R. Pizzatto, N. Mendes, L. M. Moura (Pontifícia Universidade Católica do Paraná) CODE Refrigeration Theoretical-experimental analysis of a finned tube heat exchanger composed of wavy fins used in thermal systems as condenser, C. de Paula (Universidade Federal de Minas Gerais), 0300 P-HVAC4 F. de Oliveira (Universidade Salgado de Oliveira), L. Neves (Universidade Federal de São João del Rei) Modelling and simulation of the thermal generator and rectifier of an absorption 1534 P-HVAC5 refrigeration prototype, L. C. Martinez, W. Balmant, L. Martinho, J. V. C. Vargas (Universidade Federal do Paraná) Experimental analysis of an air conditioning system with HFO R1234yf and the influence of 1821 P-HVAC6 air inlet temperatures, A. G.Gonçalves, J. Copetti, M. H. Macagnan (Universidade do Vale do Rio dos Sinos) On the development of a technological solution to mitigate summer mortality in brazilian oysters’ crops: an approach towards a HRS based application, M. A. Garcia (Instituto Federal 2513 P-HVAC7 de Santa Catarina), L. Mendes, N.Mendes (Pontifícia Universidade Católica do Paraná), Joaquim Manoel Gonçalves (Instituto Federal de Santa Catarina) Numerical simulation for flow analysis in non-adiabatic capillary tubes, H. Augusto, F. Silva, 2852 P-HVAC8 C. V. J. da Silva, M. F. Silva, L. J. C. Vasconcelos (Instituto Federal de Pernambuco) Performance of a domestic winery according to the internal localization of the refrigeration 2893 P-HVAC9 system, F. P. Amado, M. Avelino, E. Sales, F. P. D. de Araujo, E. Silva (Universidade Estácio de Sá) MMEN - Materials and Manufacturing Engineering CODE Materials Characterization and Processing Comparative study of technical and visual caracteristics of polianiline-zinc composite and 0108 P-MMEN54 comercial primer to use in the automotive industry, C. J. Santos, P. C. Borges, C. M. Cruz (Universidade Tecnológica Federal do Paraná) Influence of high velocity oxy-fuel (HVOF) deposition process on cavitation resistance of 0225 P-MMEN55 tungsten carbide coatings, M. S. Lamana, A. G. M. Pukasiewicz (Universidade Tecnológica Federal do Paraná) Study of air quenching influence on valve seat insert obtained with AISI M2 high-speed steel, 0323 P-MMEN56 M. P. Gomes, I. P. dos Santos, C. Couto, L. A. M. dos Reis, C. S. Mucsi, J. L. Rossi (Instituto de Pesquisas Energéticas e Nucleares), M. A. Colosio (General Motors do Brasil S.A.)

104 POSTER SESSION (CONT.) – WED / 6 Effects of prior heat treatment on AISI 420 steel low-temperature plasma nitrocarburizing, C. 0342 P-MMEN57 Scheuer (Universidade Federal de Santa Maria), A. D. dos Anjos, R. P. Cardoso, S. Brunatto (Universidade Federal do Paraná) Thermal characterization of hardmetal by open photoacoustic cell technique, R. G. Drabeski, 0352 P-MMEN58 A. Braghini Jr., D. Dias, J. Sousa (Universidade Tecnológica Federal do Paraná) Effect of flame treatment in the coating adhesion on polypropylene substrate, E. Medeiros, R. 0489 P-MMEN59 Brandes, H. A. Al-Qureshi, D. de O. S. Recouvreux (Universidade Federal de Santa Catarina) Analysis of the sharpening angle impact under the useful life of the Tungsten electrode used 0511 P-MMEN60 in automatic TIG Clad Welding Process, G. Krebs, M. Polli (Universidade Tecnológica Federal do Paraná) Characterization of thermal effects in the modulus of elasticity of carbon-epoxy laminate 0573 P-MMEN61 composite, using the impulse excitation technique, M. H. Zanardini (Universidade Tecnológica Federal do Paraná), A. Treml (Universidade de São Paulo) Behavior of Ti-30Nb-5Mo alloy after cold rolling and aging, M. B. de Oliveira, R. C. Toledo 0595 P-MMEN62 (Universidade Federal de Mato Grosso), R. J. Contieri (Universidade Estadual de Campinas), A. de O. F. Hayama (Universidade Federal de Mato Grosso) Characterization of DLC coating in drilling tools, O. Pereira, P. Souza, M. Câmara 0631 P-MMEN63 (Universidade Federal de Minas Gerais), W. Silva (Universidade Estadual Paulista Julio de Mesquita Filho), J. R. G. Carneiro (Pontifícia Universidade Católica de Minas Gerais) Development and mechanical characterization the of particulate polymer composite using rejects of limestone and polyester, F. Freitas, E. R. M. do Nascimento (Universidade Federal 0768 P-MMEN64 Rural do Semi-Árido), E. Ferreira (Universidade Federal do Rio Grande do Norte), D. F. F. Martins, A. Batista (Universidade Federal Rural do Semi-Árido) Use of granite powder in development of particulate polymer composites - Mechanical properties, E. R. M. do Nascimento, F. Freitas(Universidade Federal Rural do Semi-Árido), E. 0776 P-MMEN65 Ferreira (Universidade Federal do Rio Grande do Norte), D. F. F. Martins, A. Batista (Universidade Federal Rural do Semi-Árido) Study of the viability of the recycling and melting process of the zirconium alloys chips, L. A. 0914 P-MMEN66 M. dos Reis, M. P. Gomes, M. Alencar, L. A. Pereira, C. S. Mucsi, J. L. Rossi (Instituto de Pesquisas Energéticas e Nucleares) Analysis of the influence of geometric arrangement in the modulus of elasticity of composite materials, T. C. Lapczyk (Universidade Estadual do Oeste do Paraná), A. Treml 0923 P-MMEN67 (Universidade de São Paulo), L. H. C. Dall' Agnese (Universidade Estadual do Oeste do Paraná), M. H. Zanardini (Universidade Tecnológica Federal do Paraná) Manufacturing porous Fe electrodes by MIM and plasma sintering, T. S. dos Santos (Universidade Federal de Santa Maria), L. Schaeffer (Universidade Federal do Rio Grande 0943 P-MMEN68 do Sul), N. Daudt (Universidade Federal de Santa Maria), C. Binder (Universidade Federal de Santa Catarina) Influence of lamination techniques in computational simulation: comparison with 1238 P-MMEN69 experimental results of tensile tests, A. P. Leal, T. P. Tancredi, G. B. Dutra (Universidade Federal de Santa Catarina) Effect of Isothermal Treatment on Electrical Conductivity of Alloys Al-Cu-Fe-Si-0.15%Zr and 1247 P-MMEN70 Al-Cu-Fe-Si-0.22%Zr, M. C. Carvalho, R. G. da Silva, E. Prazeres, M. Lobato, J. M. do V. Quaresma (Universidade Federal do Pará) Production, characterization and stability study of ceramic composites Al2O3-CeO2-TiO2 in 1295 P-MMEN71 petroleum for coatings of metallic parts of the petroleum industry, N. D. G. Silva, R. A. S. Ferreira, Y. P. Yadava (Universidade Federal de Pernambuco) Evolution of the Al-Zn alloys microstructure manufactured by the squeeze casting process, F. 1296 P-MMEN72 Araujo, D. Silva, D. Lima, R. Lima, R. Bernardo, C. Siqueira (Universidade Federal da Paraíba) Influence of pressure on the microstructure and mechanical properties of alloy Al-0.35% Si- 1302 P-MMEN73 0.40% Mg manufactured by squeeze casting process, R. Bernardo, D. Lima, F. Araujo, R. Marques, C. Siqueira (Universidade Federal da Paraíba) Mechanical characterization of polyester resin compound with fiber of glass and wood caixeta – Tabebuia Cassinoides (lam.) Dc. – for application in aerodesign, A. C. B. Zancanella 1334 P-MMEN74 (Universidade Federal do Espírito Santo), A. Guimaraes, D. Jaegger, H. Colona, R. Maziero, D. P. Garcia, B. C. Bragança, A. P. de Barros, I. Belisario (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo) Influence of the addition of 2wt% and 6wt% Mg on the macrostructure, electrical 1419 P-MMEN75 conductivity and ultimate tensile strength of Al-0.18wt% Zr Alloy, R. R. Lima, C. Santana, J. M. P. Bezerra, M. Lobato, J. M. do V. Quaresma (Universidade Federal do Pará)

105 POSTER SESSION (CONT.) – WED / 6 Evaluation of natural hybrid composite through nondestructive tests, J. de S. e Silva Neto, R. 1443 P-MMEN76 de A. A. Lima, D. K. Cavalcanti, H. Costa, R. A. A. de Aguiar, D.Banea (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Reduction of weight and fuel consumption of vehicles using advanced high strength steels, L. 1449 P-MMEN77 M. V. Tigrinho (Instituto Federal do Paraná), S. F. Lajarin (Universidade Federal do Paraná), M. Madi, M. Beltrami (Instituto Federal do Paraná) Electromechanical analysis of the alloy Al-0.05%Cu-0.40%Fe-0.6%Mg-0.15%Ti subjected to 1532 P-MMEN78 the effect at different temperatures for the T8, R. A. dos Reis, J. M. Do V. Quaresma, J. G. dos R. Soares, M. C. Carvalho, G. Silva, I. Campos (Universidade Federal do Pará) Preparation and characterization of reprocessed composites of polypropylene reinforced by 1636 P-MMEN79 wood fibers: physical and mechanical properties, F. Jedyn, T. H. S. F.-Sahagun, K. P. Agapito (Universidade Federal do Paraná), R. M. J. Amezcua (Universidad De Guadalajara) Cooling systems for electrical machined cooled with seawater, A. Fediuk Jr. (WEG 1760 P-MMEN80 Equipamentos Elétricos S/A), R. F. Junckes (WEG Equipamentos Elétricos S.A) Study of influence of interlaminar shear strength in polymeric composites hybrid glass / 1769 P-MMEN81 carbon in structural application, A. C. R. da Conceição, O. B. da C. Vargens Neto, M. Leão (Instituto Federal Da Bahia), R. Carvalho (Universidade Federal da Bahia) Fractographic of the fracture mode on the hybrid polymeric composites glass / carbon, A. C. R. da Conceição, O. B. da C. Vargens Neto, M. Leão (Instituto Federal Da Bahia), R. 1775 P-MMEN82 Carvalho (Universidade Federal da Bahia), G. Oliveira Filho (Universidade Federal de Pernambuco) Pendular scratch tests as a tool to evaluate abrasion resistance of welded coatings, R. A. de 1780 P-MMEN83 Carvalho, H. Costa (Universidade Federal do Rio Grande) Electrical and mechanical characterization of Al-Cu-Fe-Si-Zr alloy submitted to heat 1842 P-MMEN84 treatment, C. Sousa, G. Rebelo, V. Melo, N. Costa, M. Cardoso, J. M. do V. Quaresma (Universidade Federal do Pará) Structural, electrical and mechanical evaluation of Al-Cu-Fe-Si Alloy modified with [0.15% 1846 P-MMEN85 and 0.22%] Zr contents, C. Sousa, T. Antunes, G. Oliveira, E. Prazeres, F. Oliveira, J. M. do V. Quaresma (Universidade Federal do Pará) NUCE – Nuclear Engineering CODE Nuclear Engineering One-way fluid-structure interaction model to study the influence of the fluid velocity and 0121 P-NUCE1 coolant channel thickness on the stability of nuclear fuel plates, J. G. Mantecón, M. Mattar Neto (Instituto de Pesquisas Energéticas e Nucleares) Design and assembling of a prototype automated positioner two-dimensional scanning 0622 P-NUCE2 coupled to X-ray fluorescence spectrometry, L. Silva, T. Campos (Universidade Federal de Minas Gerais) Sensitivity analysis thermal hydraulic of the Liquid-Salt-Cooled High-Temperature reactor, 1885 P-NUCE3 M. C. Ramos, A. L. Costa, M. E. Scari, W. A. Coloma, C. Pereira, M. Veloso (Universidade Federal de Minas Gerais) ICONNE - Solid Mechanics CODE Nonlinear methods Suboptimal nonlinear tracking control of mobile robot using the dynamic model, M.dos S. 0954 P-ICONNE1 Xavier (Universidade Federal do ABC), M. Rafikov (Universidade Federal do ABC) Evolutionary support vector regression approach applied to backstroke start performance modelling, L. Coelho (Pontifícia Universidade Católica do Paraná), K. de Jesus (Universidade Federal do Amazonas), C. E. Klein (Pontifícia Universidade Católica do Paraná), K. de Jesus 1264 P-ICONNE2 (Universidade Federal do Amazonas), V. Mariani (Pontifícia Universidade Católica do Paraná), L. Machado, M. Vaz, R. Fernandes, J. Paulo Vilas-Boas (Faculdade de Desporto da Universidade do Porto) CODE Numerical methods Numerical study on the performance of square tubes as energy absorbers, J. C. de S. Teles, 0745 P-ICONNE3 R. de Silva, A. Oliveira (Universidade de Brasília) Equilibrium points around a double rotating mass dipole, L. Santos, A. F. B. A. Prado, D. M. 1362 P-ICONNE4 Sanchez (Instituto Nacional de Pesquisas Espaciais) On the constructing bifurcation diagram of the quadratic map with floating-point arithmetic, 1388 P-ICONNE5 T. E. Nazaré, E. G. Nepomuceno, B. de P. O. Paiva (Universidade Federal de São João del Rei)

106 POSTER SESSION (CONT.) – WED / 6 Robust parameter design to optimize a turning process of steel AISI 12l14, F. Almeida, G. F. 2081 P-ICONNE6 Gomes, V. de Paula, R. C. Sabioni, J. H. de F. Gomes (Universidade Federal de Itajubá) Finite element analysis using arm cluster, P. M. Antunes, M. Bittencourt (Universidade 2702 P-ICONNE7 Estadual de Campinas) MECH – Mechatronic and Automation CODE Artificial Intelligent Applications Transmission sizing of a formula-type vehicle using artificial neural networks, B. Diniz, L. L. 0269 P-MECH13 Nascimento (Universidade Federal da Bahia) Interlaminar shear strength of continuous carbon fiber reinforced thermoplastic composites 0282 P-MECH14 manufactured by 3D printing, T. Dutra, R. T. L. Ferreira (Instituto Tecnológico de Aeronáutica), H. Resende (Instituto de Pesquisas Tecnológicas do Estado de São Paulo) Knowledge-based systems in design of mechatronic products, P. Rangel (Instituto Federal de 0521 P-MECH15 Santa Catarina), J. Silva (Universidade Federal de Santa Catarina) Meta-heuristics applied to system identification, F. M. U. de Araújo, A. G. V. Severino 0542 P-MECH16 (Universidade Federal do Rio Grande do Norte) Different methods for updating the modified anfis parameters, F. M. U. de Araújo, J. K. E. da 0639 P-MECH17 C. Martins (Universidade Federal do Rio Grande do Norte) Analysis and classification of welded joint defects by ultrassonic testing and artificial neural 1162 P-MECH18 networks, T. M. Barroso, J. F. S. Feiteira, R. P. de Siqueira (Universidade Federal Fluminense) Investigating the use of random forest, gradient boosting machine, support vector machine 1600 P-MECH19 and their ensemble applied to fault detection, L. Coelho (Pontifícia Universidade Católica do Paraná), L. F. Nogoseke, G. H. B. Andrade, M. Boaretto (Universidade Federal do Paraná) Embedded fuzzy controller in reconfigurable systems for obstacles avoidance in a navigation 2312 P-MECH20 system for visually impaired, T. R. de Jesus, D. Munoz (Universidade de Brasília) Paraconsistent annoted logic in the context of petri nets - an industrial application, N. 2904 P-MECH21 Rodrigues, M. Blos (Universidade Santa Cecília) CODE Computer Vision Deep learning approach based on convolutional neural networks for image processing applications, L. Coelho, J. Sauer (Pontifícia Universidade Católica do Paraná), M. Boaretto 1471 P-MECH22 (Universidade Federal do Paraná), E. G. Gruska, A. Canciglieri (Pontifícia Universidade Católica do Paraná), G. H. B. Andrade (Universidade Federal do Paraná) Development of an application for analysis and studies of an electric vehicle, F. do R. Barros 2914 P-MECH23 (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), D. Soares (Universidade Estadual do Rio de Janeiro) CODE Industrial Informatics, Discrete and Hybrid Systems Implementation of signal interpreted petri nets using C language in Arduino, M. U. Borges, 0418 P-MECH24 E. Lima II (Universidade Federal de Minas Gerais) Hybrid system using acoustic emission and electric current for fuzzy diagnosis of surface 2812 P-MECH25 wear in gearbox coupled to induction motor, A. Sena, L. J. C. Vasconcelos, A. K. F. dos Santos, D. Valadares (Instituto Federal de Pernambuco) CODE Metrology Metrological characterization of a torque shaft used in a microtorquemeter, M. Alencar, C. S. 0945 P-MECH26 Mucsi, L. C. Aranha, J. L. Rossi (Instituto de Pesquisas Energéticas e Nucleares) Design and development of perineometric signals acquisition system, via wireless 2237 P-MECH27 (Bluetooth), R. Teles, M. Araújo, M. Micussi (Universidade Federal do Rio Grande do Norte) Evaluation of contour errors in CNC 3-axis machining center using the telescoping ballbar 2354 P-MECH28 system, F. A. V. da Silva, L. da S. Diniz (Instituto Federal de Educação, Ciência e Tecnologia da Paraíba), J. C. de Lima Jr., J. Silva (Universidade Federal da Paraíba) Remote evaluation of thermal comfort conditions in academic laboratories, M. R. M. 2589 P-MECH29 Mudrek, R. G. Bartz, R. Z. Freire (Pontifícia Universidade Católica do Paraná)

107 POSTER SESSION THU / 7 ENACEM – Education Symposium CODE Education Symposium Management of the maintenance: the economy may be the result of simple controls, R. 0078 P-ENACEM1 Martins (Universidade Federal Fluminense), A. L. V. de Carvalho (Universidade Candido Mendes) Instrumentation of a didactic rotating machine bench for fault detection based on frequency 2887 P-ENACEM2 domain analysis, L. S. Yamane, M. Salles, P. R. O. Martins, J. M. Louzada Neto (Universidade Federal do Amazonas) Proposal for a practical classroom in the education of alternative energies with a small power wind generator, S. Queiroz, P. Celestino, I. de S. Queiroz Jr. (Universidade Federal 2910 P-ENACEM3 Rural do Semi-Árido), I. B. de Almeida, C. A. de Oliveira (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte) Study of teaching methodologies aiming at a more meaningful learning in engineering 5967 P-ENACEM4 subjects, A. C. V. de Oliveira, A. M. Souza, E. Assis (Universidade Federal de Uberlândia) FRFS – Fracture, Fatigue, and Structural Integrity CODE Fracture, Fatigue, and Structural Integrity Computational interface to size a Bi supported power transmission shaft with up to four 0543 P-FRFS1 cylindrical gears, L. F. B. de Moraes, B. Diniz, L. F. B. de Moraes, L. Gusmão (Universidade Federal da Bahia) Evaluation of the threshold linear elastic toughness in API 5CT P110 steel by means of hydrogen assisted fracture tests, M. S. de Oliveira, A. A. Silva, M. A. dos Santos 0597 P-FRFS2 (Universidade Federal de Campina Grande), J. A. P. Carrasco (Universidade Federal de Pernambuco), J. Marques (Universidade Federal de Campina Grande) Experimental evaluation of the acoustic emission technique applied to cotton fiber composite 0743 P-FRFS3 material, F. Eloy, A. Ancelotti, S. Cunha Jr, A. P. Filho (Universidade Federal de Itajubá) A finite element study of the influence of graphite nodules size on subsurface contact stresses 1680 P-FRFS4 of austempered ductile iron gear, J. Lazzaron, C. H. Silva, M. A. Luersen (Universidade Tecnológica Federal do Paraná) Modeling of an equipment for thermal fatigue testing. S. A. da Silva, A. Brandim (Instituto Federal de Ciência, Educação e Tecnologia do Piauí), A. E. Rocha Filho (Universidade 1745 P-FRFS5 Federal de Santa Catarina), F. A. dos Santos (Universidade Estadual do Ceará), J. Oliveira Neto (Instituto Federal de Ciência, Educação e Tecnologia do Piauí) Fatigue crack growth of AA2050 T84 alloy under flights loading. A. Chemin, C. Soares C. 1853 P-FRFS6 Ruchert (Universidade de São Paulo) Static, dynamic and modal analysis of ladder type chassis and leaf spring suspension of 2036 P-FRFS7 willys jeep utilizing the finite elements method. R. M. Garcia, C. F. De Q. Araújo, R. M. Garcia, B. de S. Rodrigues, C. Anflor (Universidade de Brasília) Application of stress concentrators in the steel a case study. R. N. de Melo Filho, F. 2366 P-FRFS8 Cavalcante (Universidade Federal Rural do Semi-Árido) Effects of the multi manufacturing weld repairs on the fatigue Crack Growth in a critic to the 2384 P-FRFS9 flight-safety structure made from AISI 4130 steel. M. P. Nascimento (Universidade Estadual Paulista Julio de Mesquita Filho) DYNM – Dynamics, Control, Vibrations and Acoustics CODE Vehicle dynamics Evaluation of the floor-seat transmissibility (SEAT) in riding vehicles and verification of 0166 P-DYNM31 vibration levels regarding health and comfort in WBV. J. S. Fagundes, H. Gomes (Universidade Federal do Rio Grande do Sul) Dynamic Analysis of Comfort and Health Effects of a Baja SAE Vehicle. J. S. Fagundes, 0351 P-DYNM32 Herbert Gomes (Universidade Federal do Rio Grande do Sul) Development of a vehicle prototype of high energy efficiency, with internal combustion engine. G. H. S. Oliveira, K. Martins, K. Barbosa, A. S. de Alencar, E. Martins, C. V. P. Costa Jr, 1407 P-DYNM33 M. da S. Serejo, L. Neves (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão) Development and implementation of a shift assistance system for an automotive chassis 1415 P-DYNM34 dynamometer. E. Bertoti, J. Eckert, R. Y. Yamashita, F. G. Dedini, L. Silva (Universidade Estadual de Campinas)

108 POSTER SESSION (CONT.) – THU / 7 Design and application of a static H_∞ control for an active suspension system. D. A. da 1910 P-DYNM35 Mata, M. dos S. Coimbra, R. L. Pereira (Universidade Federal de Itajubá) Dynamic modeling of passive hydraulic engine mounts. F. Y. Watanabe, G. O. Miguel 1981 P-DYNM36 (Universidade Federal de São Carlos) ENTS – Energy and Thermal Sciences CODE Heat and Mass Transfer Fundamentals Climate analysis in automobiles. R. S. Rodrigues (Pontifícia Universidade Católica do 0546 P-ENTS72 Paraná) Numerical simulation of drying of porous ceramic industrial brick: Analysis of parameters of 0758 P-ENTS73 temperature and moisture content. R. Sousa, M. de V. Araújo, S. R. de Farias Neto (, A. G. B. De Lima (Universidade Federal de Campina Grande) A study of the boundary condition applied in description of convective drying of ginger. J. C. 0899 P-ENTS74 R. de Araújo (Universidade Federal do Rio Grande do Norte), I. A. Da Silva, A. F. da S. Jr, J. S. P. de Ataíde, V. S. O. Farias, W. P. da Silva (Universidade Federal de Campina Grande) Analysis the temperature of three-dimensional analytical solution in Heat Conduction Two- 1113 P-ENTS75 layer. G. Oliveira, G. Guimaraes, S. Ribeiro (Universidade Federal de Uberlândia) Numerical analysis of the MBV parameter for plywood, G. Roiko, L. M. Moura (Pontifícia 1224 P-ENTS76 Universidade Católica do Paraná) Experimental study of film coefficient in the cooling of a solid in ambient air. E. Chiaramonte 1585 P-ENTS77 (Universidade Federal do Pampa), R. Garcia, L. Ries, C. Pibernat, A. Schmitz, F. Juchem (Universidade Federal do Rio Grande do Sul) Study and manufacture of sunlight diffractors. Í. K. A. Lucena, J. W. O. Silva, J. Mendes, S. L. 1684 P-ENTS78 De L. Cavalcanti, V. L. Vieira (Universidade Federal do Rio Grande do Norte) Effects of the head loss and temperature of adsorption in the bed adsorptive. R. Díaz (Centro 1701 P-ENTS79 Federal de Educação Tecnológica Celso Suckow da Fonseca), P. Quintans, L. A. Sphaier (Universidade Federal Fluminense) Selection of thermal insulation applied in industrial shed roof using genetic algorithm. M. N. 1743 P-ENTS80 Stamoulis, G. Santos, A. M. Tusset , D. P. Vasconcellos, C. Diedrich (Universidade Tecnológica Federal do Paraná) Study of temperature distribution in a steady-state concrete chimney. K. P. M. De Oliveira, G. 1791 P-ENTS81 Bonillo, R. S. Pereira (Universidade Federal de Mato Grosso) Numerical simulation of mixed convection in cavity filled with heterogeneous and 1970 P-ENTS82 homogeneous porous medium. R. N. Tavares, F. C. De Lai, S. Junqueira (Universidade Tecnológica Federal do Paraná) Minimizing methods for frost growth in evaporators using different coating layers, R. C. R. da 2444 P-ENTS83 Silva (Universidade Tecnológica Federal do Paraná), P. Delgado (Faculdade Guarapuava), G. S. Rodrigues (Universidade Estadual de Campinas) Analysis of defects in wood materials using infrared thermography, T. Semann, L. M. Moura, 2927 P-ENTS84 S. H. Och (Pontifícia Universidade Católica do Paraná) CODE Thermodynamics and Thermal Systems Modeling and simulation of a shell and tube heat exchanger used for reducing flue gas temperature for microalgae mitigation. G. Finger, J. G. B. Martinez, L. C. Martinez, I. Costa, L. 0065 P-ENTS85 Rigatti, Y. Kovara, A. Gonçalves, W. Balmant, A. Mariano , J. V. C. Vargas (Universidade Federal do Paraná) Development of a data acquisition system using open platform. R. Predolin,V. L. Scalon 0069 P-ENTS86 (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) Green roof building analysis and simulation of thermo-energy behavior. R. Predolin, V. L. 0084 P-ENTS87 Scalon (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru) Development and analysis of low cost solar heather. D. Taborda, E. Machado, I. Carlos, J. A. 0187 P-ENTS88 Silva (Universidade Federal de São João del Rei) Development and performance analysis of a compression refrigeration cycle. S. Rabelo, S. Rabelo (Universidade Federal de Minas Gerais), H. G. Coutinho Jr, F. Vasconcelos, Y. Ávila , 0259 P-ENTS89 J. P. P. Martins, M. Niterói, G. Oliveira, L. Teixeira, E. A. S. Nogueira, J. D. Simeão (Universidade de Itaúna) Mathematical model of a heat exchanger operating with emissions from a thermal 0836 P-ENTS90 treatment of municipal solid waste. M. N. Muñoz, J. V. C. Vargas, W. Balmant (Universidade Federal do Paraná) Solarium: machine for solar thermal applications in isolated communities on amazon. A. 0913 P-ENTS91 Tobias, R. I. Mendes (Universidade Estácio de Sá)

109 POSTER SESSION (CONT.) – THU / 7 Using a classifier for behavior assessment of refrigeration system. T. Mendes (Universidade Federal de Itajubá), E. Horta (Universidade Federal dos Vales do Jequitinhonha e Mucuri), 1183 P-ENTS92 M. Guzella (Universidade de São Paulo), O. J. Venturini, M. Pirani (Universidade Federal de Itajubá) Thermodynamic analysis of an organic rankine cycle using the burning of the açaí seed as 1339 P-ENTS93 heat source. A. de C. Cavalcante (Universidade Federal do Amazonas) Thermodynamic analysis of adiabatic compressed air energy storage systems. T. L. 1643 P-ENTS94 Camargos, D. L. F. Pottie, J. V. N. Moreira, G. Barros, M. Porto (Universidade Federal de Minas Gerais) Modeling and simulation of thermal management systems of electronic equipment . L. 1931 P-ENTS95 Rigatti, J. V. C. Vargas, W. Balmant (Universidade Federal do Paraná) Analysis of thermal insulation and impact resistance of composites produced with green 2208 P-ENTS96 coconut residue. W. Librelon (Universidade Federal de Minas Gerais), A. A. Xavier (Instituto Newton Paiva), P. S. Uliana Jr, V. Lins, M. Houmard (Universidade Federal de Minas Gerais) Thermodynamic modeling of the autoignition temperature. B. Hannud, M. Pimenta 2518 P-ENTS97 (Universidade de São Paulo) Establishment of energy demands for a residential building in João Pessoa, Northeast Brazil. 2522 P-ENTS98 F. Melo, M. Carvalho (Universidade Federal da Paraíba) Multicriteria optimization of the energy supply for a Northeast Brazil hospital, considering 2525 P-ENTS99 solar photovoltaic energy. J. N. de Figueiredo, B. C. T. de Carvalho, C. T. M. C. B. de Melo, J. Figueiredo, M. Carvalho (Universidade Federal da Paraíba) Design of a mechanical device for the reduction of noise and emission of gas and particles for diesel engines. J. Silva, L. Figueiredo, H. Pascoal, D. S. T. Mendes Jr, C. Tavares, A. 5313 P-ENTS100 Conceição, E. Santos (Universidade Federal do Pará), C. E. A. da Costa (Brentech Energia S/A) CODE Thermo-Economic Analysis and Energy Policy Computational modeling and energy evaluation of a real cooling system of a refrigeration 0852 P-ENTS101 chamber. L. Lobo, L. A. S. LEITE, M. A. F. Costa, G. R. dos Anjos (Universidade Estadual do Rio de Janeiro) LCA of the insertion of an integrated lignocellulosic ethanol plant to a sugarcane plant. J. 0930 P-ENTS102 Furtado, J. C. E. Palacio, F. Dovichi, E. E. Lora, J. E. L. da Costa (Universidade Federal de Itajubá) MMEN - Materials and Manufacturing Engineering CODE Materials Characterization and Processing Tribological properties of boronized AISI 4140 steel. S. Aichholz, R. Torres, P. Soares , A. 0939 P-MMEN86 Almeida (Pontifícia Universidade Católica do Paraná) The influence of specimen surface roughness on tensile testing results. M. Beltrami,, M. 1942 P-MMEN87 Kikuchi, R. Sucaria, G. Souza (Instituto Federal do Paraná) Study of stability of Al2O3-Y2O3-TiO2 composite ceramics in crude petroleum environment 1948 P-MMEN88 for inert coating applications in petroleum industry. L. Albuquerque, B. Constantino, R. A. S. Ferreira, Y. P. Yadava, M. T. G. Lima (Universidade Federal de Pernambuco) Microstructural characterization of the alloy Ti-6Al-4V obtained by different manufacturing 2103 P-MMEN89 processes. C. D. da Silva, M. Larosa, A. Jardini, C. Zavaglia (Universidade Estadual de Campinas) Effect of period thickness on residual stress values of Cr/CrN multilayer hard coatings. A. 2134 P-MMEN90 Gomez (Pontificia Universidad Javeriana Cali), D. Arias, J. M. V. Restrepo (Universidad Nacional de Colombia), R. Souza (Universidade de São Paulo) Microhardness behaviour of TiSiN/AlCrN coating after hight temperature tribological test, C. 2142 P-MMEN91 B. Pereira, P. Soares, R. D. Torres (Pontifícia Universidade Católica do Paraná) Modification of polypropylene/glass fiber composite by electron beam irradiation. M. A. de 2145 P-MMEN92 Castro, R. Michalak, D. C. Pfeifer, D. de O. S. Recouvreux (Universidade Federal de Santa Catarina) Reuse of waste industry buttonhole for manufacture of glass and jute fiber composite materials: static and dynamic characterization. A. K. C. de Araújo, L. de L. Freire, M. 2231 P-MMEN93 Furukava (UNIVERSIDADE FEDERAL RURAL O SEMI-ARIDO), M. Furukava (Universidade Federal do Rio Grande do Norte), H. J. F. Diógenes (Universidade Federal da Paraíba) Banded structure dispersion of ASTM A588 Grade B steel after successive low cooling rate 2280 P-MMEN94 heat treatments. D. Soares, G. Stieven, J. Lopes (Universidade Federal do Pará) Microstructural analysis and hardness of welds overlay of FeCrMo alloys. C. Lima, A. R. 2294 P-MMEN95 Correa, D. C. S. Cardoso, E. Braga (Universidade Federal do Pará)

110 POSTER SESSION (CONT.) – THU / 7 Behavior of intradendritic and interdendritic microhardness of an aluminum-silicion alloy 2420 P-MMEN96 directionally solidified. G. Stieven, D. Soares, D. Lafont, E. Lins, E. OLIVEIRA (Universidade Federal do Sul e Sudeste do Pará) Graphite size and distribution of nodular cast iron obtained by continuous casting. S. 2428 P-MMEN97 Manenti, P. V. Marcondes, P. Soares, R. Torres (Pontifícia Universidade Católica do Paraná) Evaluation of fatigue resistance of Ti-6Al-4V after thermal treatment. M. Silva, R. C. Souza, 2530 P-MMEN98 R. Duarte (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo) Comparison between two surface preparations of WC-10Co-4Cr and their effect on erosion 2628 P-MMEN99 wear resistance. D. M. P. Nagasima, R. Souza (Universidade de São Paulo) Mechanical strength of synthetic stones obtained from soapstone residues in Ouro Preto 2636 P-MMEN100 region – Brazil. M. G. A. Ranieri (Universidade Federal de Itajubá) Obtaining and study a composite with polyester resin matrix and load of chicken eggshell. L. 2755 P-MMEN101 Souza, M. Andrade, M. Oliveira, K. Fontes, I. Medeiros (Universidade Federal do Rio Grande do Norte) Obtaining and characterizing a composition of polyester resin matrix and wood residues. L. 2756 P-MMEN102 Souza, L. G. V. M. de S. (Universidade Federal do Rio Grande do Norte), I. Medeiros, M. Andrade, A. G. Cavalcante, K. Fontes (Universidade Federal do Rio Grande do Norte) Influence on Thermal Treatments in the Hardness and Micro Hardness of the Alloy 7075, E. 2757 P-MMEN103 G. M. Bejarano, M. M. S. Suárez, Y. F. Q. Gamboa, M. de L. N. M. Melo (Universidade Federal de Itajubá) Tribological properties of unsaturated polyester reinforced with graphite, V. Borges (Universidade Tecnológica Federal do Paraná), J. H. S. Hartmann (Universidade Tecnológica 2823 P-MMEN104 Federal do Paraná - Campus Guarapuava), C. M. Cruz, C. H. Silva (Universidade Tecnológica Federal do Paraná) Ceramics cutting tools apply on dry turning of gray and nodular cast iron, T. A. de Sousa, J. 2830 P-MMEN105 V. C. de Sousa (Universidade Estadual Paulista Julio de Mesquita Filho) Evaluation of the elastic properties of composite materials by the rule of mixtures and computer program, J. Figueiredo, I. Okabe, G. F. Miranda, M. Kuwahara, R. Fujiyama, C. T. 2837 P-MMEN106 N. M. Branco, I. dos S. Gomes, D. Silva, L. M. Almeida, F. de Sousa (Universidade Federal do Pará), L. F. N. Marques (Universidade Federal do Sul e do Sudeste do Pará) Theoretical-experimental comparison of the classical laminate theory for composite materials of fiberglass and polyester matrix, C. T. N. M. Branco, I. dos S. Gomes, D. Silva, L. 2849 P-MMEN107 M. Almeida, F. de Sousa (Universidade Federal do Pará), L. F. N. Marques (Universidade Federal do Sul e do Sudeste do Pará), J. Figueiredo, I. Okabe, G. F. Miranda, M. Kuwahara, R. Fujiyama (Universidade Federal do Pará) Evaluation of the influence of the bamboo fibers of the basal, intermediate and top region on the mechanical and fractographic properties of composite materials of polymeric matrix, M. 2850 P-MMEN108 Kuwahara, F. Silva, C. T. N. M.Branco, I. dos S. Gomes, D. Silva, L. M. Almeida, F. de Sousa , J. Figueiredo, I. Okabe, G. F. Miranda, R. Fujiyama (Universidade Federal do Pará) Synthesis and characterization of cnt-o 2 thin films as double layer capacitor electrode, M. 2921 P-MMEN109 B. Moraes, G. Thim (Instituto Tecnológico de Aeronáutica) Study of mechanical behavior at cryogenic temperature of AISI 430 with different strain 5145 P-MMEN110 rates, L. O. Felicio, M. Azevedo, M. Crivoi, M. T. Izumi, R. S Namur, O. Cintho (Universidade Estadual de Ponta Grossa) CODE Additive Manufacture Development of a split mold with low-cost materials for manufacturing of mechanical fixing 0563 P-MMEN111 elements by powder metallurgy process, U. Júnior, Z. Vilar, P. Caminha, M. P. S. Barbosa, P. Queiroz, M. Fonseca (Universidade Federal Rural do Semi-Árido) A methodology for measuring the compression behavior of Ti-6Al-4V cellular structures fabricated by Electron Beam Melting, G. Fraga (Universidade Federal de Santa Catarina), J. 1402 P-MMEN112 V. L. da Silva, P. I. Neto (Centro de Tecnologia da Informação Renato Archer), C. R. de M. Roesler (Universidade Federal de Santa Catarina) Comparison of the porosity of scaffolds manufactured by two additive manufacturing 1460 P-MMEN113 technologies: SLA and FDM, B. V. Magaldi, A. C. Araujo, M. de O. da C. M. Pinto, R. Thiré (Universidade Federal do Rio de Janeiro) 3D Facial Reconstruction by photographs, P. Reis, A. Maia, J. C. C. Rubio (Universidade 1582 P-MMEN114 Federal de Minas Gerais), M. R. V. Lana (Associação Mineira De Reabilitação), P. Faria, B. Lizardo (Universidade Federal de Minas Gerais) Low cost tensile testing machine for FDM parts mechanical behavior characterization, A. 1957 P-MMEN115 Cavalcante, I. M. Pepe, N. Oliveira, M. V. Lima, J. A. M. Alfonzo (Universidade Federal da Bahia)

111 POSTER SESSION (CONT.) – THU / 7 Optical scanning methods: a comparative study, P. Reis (Universidade Federal de Minas 2024 P-MMEN116 Gerais), M. R. V. Lana, A. Horta (Associação Mineira De Reabilitação), M. A. Borges (Universidade Federal de Minas Gerais) Proposal of an advanced data model for step-nc compliant additive manufacturing, E. 2435 P-MMEN117 Rodriguez, R. Bonnard, A. Alvares (Universidade de Brasília) Influence of tool path optimization in additive manufacturing based on material extrusion, 2661 P-MMEN118 N. Volpato, T. Zanotto, T. Weller (Universidade Tecnológica Federal do Paraná) 3D DLP additive manufacturing: printer and validation, L. Olmos, J. Lovo, I. L. de Camargo, 2761 P-MMEN119 C. Consonni, C. Fortulan (Universidade de São Paulo) PROD - Product Engineering CODE Product Engineering High power water jet: testbench development for performance investigation in pressurized 0557 P-PROD1 condition, J. Passos, R. P. dos Santos (Universidade Federal de Santa Catarina), M. Noronha (Instituto Federal de Santa Catarina) Improvement of thermoforming process aiming higher productivity, M. Pereira (Universidade 1978 P-PROD2 Federal de Santa Catarina), A. da C. S. Netto (Instituto Federal de Santa Catarina), H. Silva (Universidade do Extremo Sul Catarinense) Controlled atmosphere ozone generator, C. Matos, L. R. Oliveira (Universidade Federal da 2290 P-PROD3 Bahia), L. C. S. Junior (Universidade Federal do Recôncavo da Bahia), I. M. Pepe (Universidade Federal da Bahia) The development of a dynamometer applied to a wheelchair, C. Rech, P. Balafa, A. Knop, C. 2584 P-PROD4 R. O. dos Santos (Centro Universitário La Salle), P. S. Schneider (Universidade Federal do Rio Grande do Sul) A study of the application of the RSM methodology at the product design scenario, L. B. 2775 P-PROD5 Fornazzari, L. Silva, F. G. Dedini (Universidade Estadual de Campinas) Design and manufacture of attritor laboratory mill for low cost, L. Albergaria, C. Teodoro, D. 2780 P-PROD6 Junqueira, M. M. Junqueira, D. Ribeiro (Universidade Federal de Itajubá), M. E. Lopes (Centro Universitário de Itajubá), G. Silva (Universidade Federal de Itajubá) Topological optimization of an engine bracket, M. T. B. dos Anjos (Fiat Chrysler 2797 P-PROD7 Automobiles), D. M. Jr. (Universidade Federal de Minas Gerais) Particle swarm optimization of turbojet engine thrust, F. Stark, D. Jeronymo (Universidade 2836 P-PROD8 Tecnológica Federal do Paraná) SMST - Smart Materials and Structures CODE Smart Materials and Structures IPMC – multiphysics actuator: computer simulation in a 1D beam of Bernoulli-Euler, A. L. Pereira (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), F. Duda 0086 P-SMST1 (Universidade Federal do Rio de Janeiro), A. C. C. de Souza (Universidade Federal Fluminense) An alternative way of sensing in smart structures using piezoelectric elements, A. Gonçalves 0577 P-SMST2 (Universidade Federal da Paraíba), A. Emiliavaca (Universidade Federal de Campina Grande), C. da R. Souto, J. M. B. Sobrinho, M. F. Cunha (Universidade Federal da Paraíba) Study of the effect of heat treatment on a NITI alloy, W. J, L, Bezerra, P. Queiroz, C. Alves, Z. 1175 P-SMST3 Vilar, D. A. Bezerra (Universidade Federal Rural do Semi-Árido) Frequency Range Optimization by the Use of ACO and BCO Methods in the Impedance- 1363 P-SMST4 based SHM, J. P. M. Bento, B. P. Barella, S. W. Rezende, J. dos R. V. de Moura Jr (Universidade Federal de Goiás) Analysis of the effect of heat treatments in the manufacturing process of shape memory 1533 P-SMST5 alloy springs, B. T. Duarte, R. A. A. de Aguiar, P. M. C. L. Pacheco (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca) Characterization of an active composite obtained with shape memory alloys, Z. Vilar, W. J. L. Bezerra, D. A. Bezerra (Universidade Federal Rural o Semi-Arido), C. J. de Araujo 1894 P-SMST6 (Universidade Federal de Campina Grande), P. Queiroz, G. Diniz (Universidade Federal Rural o Semi-Arido) Numerical simulation and experimental procedure for heating and cooling of a sma spring device, A. Oliveira, P. C. S. da Silva, J. R. F. Oliveira (Universidade Federal de Campina 1973 P-SMST7 Grande), R. P. B. dos Reis (Universidade Federal Rural do Semi-Árido), A. A. Silva, C. R. B. Filho (Universidade Federal de Campina Grande)

112 POSTER SESSION (CONT.) – THU / 7 Conversion of superelastic NiTi SMA wires in thermomechanical actuators: a study based on 2057 P-SMST8 heat treatments, D. J. A. Ribeiro, P. C. S. da Silva, C. J. de Araujo, E. da T. Marcelino (Universidade Federal de Campina Grande) Characterization of Nitinol alloy in the commercial state, R. Lins (Universidade Federal do 2690 P-SMST9 Rio Grande do Norte), R. F. Alves (Universidade Federal da Paraíba), L. Costa, G. Oliveira, T. de Oliveira, T. Viana (Universidade Federal do Rio Grande do Norte) A topology optimization solver applied to 3D compliant mechanism design, M. Reis, C. Lima 2883 P-SMST10 (Universidade Federal do ABC) Mechanical behavior of Ni-Ti SMA helical springs manufactured by investment casting, J. J. de M. Santiago, P. C. S. da Silva (Universidade Federal de Campina Grande), J. Simoes 2902 P-SMST11 (Universidade Federal Rural Do Semi-Arido), C. J. de Araujo (Universidade Federal de Campina Grande) MECH - Mechatronics and Automation CODE Robotics, Sensors & Actuators Project and design of a 1D probe positioner, J. G. dos R. Soares, D. R. S. Guerra, F. Barros, P. 0271 P-MECH30 Silva, F. Martelli (Universidade Federal do Pará) Kinematic modeling of 5r parallel symmetrical mechanism subjected to uncertainties, L. A. 0272 P-MECH31 Martins, F. A. Lara-Molina, T. F. Proenca (Universidade Tecnológica Federal do Paraná) Explorer robot:platform based on raspberry board, F. Aureliano, A. Fidelis (Centro 1746 P-MECH32 Universitário do Sul de Minas Gerais ), A. Lopes (Universidade Federal de Itajubá), J. Freitas (Centro Universitário do Sul de Minas) Design of a cost effective educational instrument to study solar tracking strategies, B. Alves 1786 P-MECH33 (Instituto Federal de Educação, Ciência e Tecnologia do Ceará), F. Brito, R. Melo (Instituto Federal do Ceará) Smoothing transverse profiles of point clouds using mathematical morphology and energy 1896 P-MECH34 minimization, J. M. S. T. da Motta, R. Gonzalez (Universidade de Brasília) Development of a prototype circuit for viscous damping measurement, R. L. Thomaz, V. Fl Jr, 2011 P-MECH35 M. H. Granza (Universidade Tecnológica Federal do Paraná) A new mechanical project for a lower limb exoskeleton, G. N. da S. Dantas, M. Araújo, P. J. 2174 P-MECH36 Alsina (Universidade Federal do Rio Grande do Norte), L. R. R. Araujo (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte) Design and development of a load cell in an intelligent elbow crutch for an exoskeleton, F. M. 2190 P-MECH37 C. Trigueiro, M. Araújo (Universidade Federal do Rio Grande do Norte) Conductivity and capacitance sensor for measuring water and oil emulsions, L. Ferreira, J. L. 2305 P-MECH38 Silva Neto, J. Loureiro, W. Monteiro, A. Guimarães (Universidade Federal do Rio de Janeiro) Design and development of a wheeled robot soccer team, M.E. P. Fernandes, M. Araújo, E. 2352 P-MECH39 da S. Souza, D. S. de Morais, A. A. D. de Medeiros (Universidade Federal do Rio Grande do Norte) Mechanical project and control of robot guidelines for visual disabilities, P. Lima, M. Neto, É. 2710 P-MECH40 Franklin , D. Resende, A. Sena (Instituto Federal de Pernambuco) Robotic hand operated with super-elastic memory wires, P. Lima, M. Neto, A. Silva, M. F. 2790 P-MECH41 Silva, S. Santos, A. Sena (Instituto Federal de Pernambuco) Construction and control pid of delta parallel robot, A.Sena, A. Silva, A. Silva (Instituto 2813 P-MECH42 Federal de Pernambuco) Modelling and control of a wheeled mobile robot, A. Oliveira, M. E.M. Meza, D. P. F. Correa 5805 P-MECH43 (Universidade Federal do ABC)

113