2DCA3(B)

DTP WITH PAGEMAKER & PHOTOSHOP

UNIT -2

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

UNIT -2 Adobe PageMaker 2.1 INTRODUCTION

Adobe PageMaker is the “world‟s leading cross- platform professional page layout software”. PageMaker is primarily used for designing and producing publication that requires a combination of text and graphics. PageMaker has a rich array of facilities to import text and artwork from other computer application packages, as well as allowing you to generate these directly from within PageMaker itself. PageMaker can handle text better than Illustrator and Photoshop and also give you the flexibility of graphic control not available in word processors.

एडोफ ऩेजभेकय "दनु नमा का प्रभखु क्रॉस-प्रेटफॉभम ऩेशेवय ऩेज रेआउट सॉफ़्टवेमय" है। ऩेजभेकय भख्ु म 셂ऩ से डडजाइन औय प्रकाशन के लरए उऩमोग ककमा जाता है जजसभᴂ ऩाठ औय ग्राकपक्स के सॊमोजन की आवश्मकता होती है। ऩेजभेकय के ऩास अन्म कॊ प्मटू य एजप्रके शन ऩकै े जⴂ से टेक््ट औय कराकृ नत आमात कयने के लरए सवु वधाओॊ का एक सभद्धृ सयणी है, साथ ही आऩको सीधे ऩेजभेकय के बीतय से इन्हᴂ उत्ऩन्न कयने की अनभु नत है। ऩेजभेकय टेक््ट को इर्रेटय औय पोटोशॉऩ से फेहतय तयीके से हℂडर कय सकता है औय आऩको ग्राकपक कॊ रोर की सवु वधा बी देता है जो वड म प्रोसेसय भᴂ उऩरब्ध नहीॊ है। 2.2 Aldus & Adobe PageMaker

PageMaker was the first program, introduced in 1985 by , initially for the Apple but soon after also for the PC. It relies on Adobe Systems' PostScript page description language. In 1994 Aldus and PageMaker were acquired by Adobe Systems. PageMaker was awarded a SPA Excellence in Software Award for Best New Use of a Computer in 1986.

ऩेजभेकय ऩहरा ड्े कटॉऩ ऩजब्रलशगॊ प्रोग्राभ था , जो 1985 भᴂ ए쥍डस कॉऩोयेशन 饍वाया श셂ु ककमा गमा था , श셁ु आत भᴂ ऐप्ऩर भकै कनटोश के लरए रेककन ज쥍द ही ऩीसी के लरए बी। मह एडोफ लस्ट륍स के ऩो्टज्क्रप्ट ऩष्ृ ठ वववयण बाषा ऩय ननबयम कयता है। 1994 भᴂ एडोफ लस्ट륍स 饍वाया ए쥍डस औय ऩेजभेकय का अधधग्रहण ककमा गमा था। ऩेजभेकय को

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

1986 भᴂ एक कॊ प्मटू य के सवश्रम ेष्ठ नए उऩमोग के लरए सॉफ्टवेमय उत्कृ ष्टता भᴂ एसऩीए उत्कृ ष्टता से स륍भाननत ककमा गमा था। 2.3 Previous and current versions of page maker

 Aldus Pagemaker 1.0 was released in July 1985 for the Macintosh and in December 1986 for the IBM PC.

 ए쥍डस ऩेजभेकय 1.0 को जुराई 1985 भᴂ भकै कॊ टोश के लरए औय ददसॊफय 1986 भᴂ आईफीएभ ऩीसी के लरए जायी ककमा गमा था।  Aldus Pagemaker 1.2 for Macintosh was released in 1986 and added support for PostScript fonts built into LaserWriter Plus or downloaded to the memory of other output devices. PageMaker was awarded a Codie award for Best New Use of a Computer in 1986. In October 1986, a version of Pagemaker was made available for Hewlett- Packard's HP Vectra computers. In 1987. Pagemaker was available on Digital Equipment's VAXstation computers.

 भकै कॊ टोश के लरए ए쥍डस ऩेजभेकय 1.2 को 1986 भᴂ जायी ककमा गमा था औय रेजयवेटय प्रस भᴂ ननलभतम ऩो्टज्क्रप्ट पⴂट के लरए सभथनम जोडा गमा था मा अन्म आउटऩटु डडवाइसⴂ की भेभोयी भᴂ डाउनरोड ककमा गमा था। ऩेजभेकय को 1986 भᴂ कॊ प्मटू य के सवश्रम ेष्ठ नए उऩमोग के लरए कोडी ऩयु ्काय से स륍भाननत ककमा गमा था। अक्टूफय 1986 भᴂ, हेवरेट-ऩकै ड म के एचऩी वेक्रा कॊ प्मटू यⴂ के लरए ऩेजभेकय का एक सॊ्कयण उऩरब्ध कयामा गमा था। 1987 भᴂ। ऩेजभेकय डडजजटर उऩकयण के वक्ै स्टेशन कॊ प्मटू य ऩय उऩरब्ध था।  Aldus Pagemaker 2.0 was released in 1987. Until May 1987, the initial Windows release was bundled with a full version of Windows 1.0.3; after that date, a "Windows-runtime" with no task-switching capabilities was included. Thus, users who did not have Windows could run the application from MS-DOS.

 ए쥍डस ऩेजभेकय 2.0 को 1987 भᴂ जायी ककमा गमा था। भई 1987 तक, प्रायॊलबक ववॊडोज रयरीज को ववॊडोज 1.0.3 के ऩणू म सॊ्कयण के साथ फॊडर ककमा गमा था , उस तायीख के

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

फाद, "ववॊडोज-यनटाइभ" जजसभᴂ कोई काम-म ज्वधचॊग ऺभताओॊ को शालभर नहीॊ ककमा गमा था। इस प्रकाय , जजन उऩमोगकतामओॊ के ऩास ववॊडोज नहीॊ था , वे एभएस-डॉस से एजप्रकेशन चरा सकते थे।  Aldus Pagemaker 3.0 for Macintosh was shipped in April 1988. PageMaker 3.0 for the PC was shipped in May 1988 and required Windows 2.0, which was bundled as a run- time version. Version 3.01 was available for OS/2 and took extensive advantage of multithreading for improved user responsiveness.

 भैककन्टोश के लरए ए쥍डस ऩेजभेकय 3.0 अप्रैर 1988 भᴂ बेजा गमा था। ऩीसी के लरए ऩेजभेकय 3.0 को भई 1988 भᴂ बेज ददमा गमा था औय इसके लरए ववडॊ ोज 2.0 की आवश्मकता थी, जजसे यन-टाइभ सॊ्कयण के 셂ऩ भᴂ फॊडर ककमा गमा था। सॊ्कयण 3.01 ओएस / 2 के लरए उऩरब्ध था औय फेहतय उऩमोगकताम जवाफदेही के लरए भ쥍टीथ्रेडडॊग का व्माऩक राब उठामा।  Aldus PageMaker 4.0 for Macintosh was released in 1990 and offered new word- processing capabilities, expanded typographic controls, and enhanced features for handling long documents. A version for the PC was available by 1991.

 भकै कॊ टोश के लरए ए쥍डस ऩेजभेकय 4.0 को 1990 भᴂ जायी ककमा गमा था औय रॊफे द्तावेजⴂ को सॊबारने के लरए नई वडम-प्रोसेलसॊग ऺभताओॊ , वव्तारयत टाइऩोग्राकपक ननमॊत्रण औय वव्तारयत सवु वधाओॊ की ऩेशकश की गई थी। ऩीसी के लरए एक सॊ्कयण 1991 तक उऩरब्ध था।  Aldus PageMaker 5.0 was released in January 1993.

 ए쥍डस ऩेजभेकय 5.0 जनवयी 1993 भᴂ जायी ककमा गमा था।

 Adobe PageMaker 6.0 was released in 1995, a year after Adobe Systems acquired Aldus Corporation.

 एडोफ लस्ट륍स 饍वाया ए쥍डस कॉऩोयेशन का अधधग्रहण कयने के एक सार फाद 1995 भᴂ एडोफ ऩेजभेकय 6.0 जायी ककमा गमा था।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

 Adobe PageMaker 6.5 was released in 1996. Support for versions 4.0, 5.0, 6.0 and 6.5 are no longer offered through the official Adobe support system. Due to Aldus' use of closed, proprietary data formats, this poses substantial problems for users who have works authored in these legacy versions.

 एडोफ ऩेजभेकय 6.5, 1996 भᴂ जायी ककमा गमा था। सॊ्कयण 4.0, 5.0, 6.0 औय 6.5 के लरए सभथमन अफ आधधकारयक एडोफ सभथमन प्रणारी के भाध्मभ से ऩेश नहीॊ ककमा गमा है। ए쥍डस के फॊद , भालरकाना डेटा ्व셂ऩⴂ के उऩमोग के कायण , मह उन उऩमोगकतामओॊ के लरए कापी सभ्माएॉ खडी कयता है , जजनके ऩास इन ववयासत सॊ्कयणⴂ भᴂ काभ कयने वारे रेखक हℂ।  Adobe PageMaker 7.0 was the final version made available. It was released 9 July 2001, though updates have been released for the two supported platforms since. The Macintosh version runs only in Mac OS 9 or earlier; there is no native support for Mac OS X, and it does not run on Intel-based Macs without SheepShaver. It does not run well under Classic, and Adobe recommends that customers use an older Macintosh capable of booting into Mac OS 9. The Windows version supports Windows XP, but according to Adobe, "PageMaker 7.x does not install or run on Windows Vista."

 एडोफ ऩेजभेकय 7.0 अॊनतभ सॊ्कयण उऩरब्ध कयामा गमा था। मह 9 जुराई 2001 को जायी ककमा गमा था , हाराॊकक दो सभधथतम प्रेटपाभⴂ के लरए अऩडटे जायी ककए गए हℂ। Macintosh सॊ्कयण केवर Mac OS 9 मा ऩवू म भᴂ चरता है ; भैक ओएस एक्स के लरए कोई देशी सभथमन नहीॊ है , औय मह शीऩशावय के बफना इॊटेर-आधारयत भैक ऩय नहीॊ चरता है। मह क्रालसक के तहत अ楍छी तयह से नहीॊ चरता है , औय एडोफ अनशु ॊसा कयता है कक ग्राहकभैक ओएस 9 भᴂ फटू कयने भᴂ सऺभ ऩयु ाने भकै कनटोश का उऩमोग कयᴂ। ववडॊ ोज सॊ्कयण ववडॊ ोज एक्सऩी का सभथनम कयता है , रेककन एडोफ के अनसु ाय , "ऩेजभेकय 7.x ववॊडोज वव्टा ऩय इॊ्टॉर मा यन नहीॊ कयता है । "

2.4 PageMaker as DTP Software

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

PageMaker is one of the first Desktop Publishing (DTP) software introduced three decades ago. It is a page layout application, commonly used in the Print Media, Publication Industry, Advertising, Graphic Designing and every other domain where paper is a common practice

ऩेजभेकय तीन दशक ऩहरे ऩेश ककए गए ऩहरे ड्े कटॉऩ ऩजब्रलशगॊ (डीटीऩी) सॉफ्टवेमय भᴂ से एक है। मह एक ऩेज रेआउट एजप्रके शन है , जो आभतौय ऩय वप्रॊट भीडडमा, प्रकाशन उ饍मोग , ववऻाऩन, ग्राकपक डडजाइननगॊ औय हय दसू ये डोभेन भᴂ उऩमोग ककमा जाता है जहाॊ ऩेऩय वप्रॊदटॊग एक आभ फात है 2.5 Attribute settings

2.5.1 Tools

UNDERSTANDING PAGEMAKER TOOLS

TOOL BOX

Toolbox contains all the tools used to create a publication in PageMaker. Choose Window and select Show Tools to display the toolbox. The individual tools will be explained in detail.

टूरफॉक्स भᴂ ऩेजभेकय भᴂ प्रकाशन फनाने के लरए उऩमोग ककए जाने वारे सबी उऩकयण शालभर हℂ। टूरफॉक्स प्रदलशतम कयने के लरए ववडॊ ो चनु ᴂ औय शो टूर चनु ᴂ। व्मजक्तगत उऩकयण के फाये भᴂ वव्ताय से फतामा जाएगा।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

ZERO POSITION

Zero Position allows you to set the zero position on the screen. Zero position is the position, where both the top and the left side rules are at zero. By Zero positioning all measurements in the are made relative to this point. Click it and drag it to anywhere on the workspace to set it as the Zero Point.

शन्ू म ज्थनत आऩको ्क्रीन ऩय शन्ू म ज्थनत सेट कयने की अनभु नत देती है। शन्ू म ज्थनत वह ज्थनत है , जहाॊ शीषम औय फाℂ ओय के ऩभै ाना दोनⴂ शन्ू म ऩय हℂ। जीयो ऩोजजशननगॊ 饍वाया ऩष्ृ ठⴂ भᴂ सबी भाऩ इस बफदॊ ु के साऩेऺ फनाए जाते हℂ। इसे जक्रक कयᴂ औय इसे शन्ू म बफदॊ ु के 셂ऩ भᴂ सेट कयने के लरए कामऺम ेत्र ऩय कहीॊ बी खीॊचᴂ।

POINTER TOOL

Pointer tool is used to pick, drag and drop graphics and text.

ग्राकपक्स औय टेक््ट को चनु न,े खीॊचने औय छोडने के लरए ऩॉइॊटय टूर का उऩमोग ककमा जाता है।

TEXT TOOL

Text Tool is used to edit and select text and insert text frames. Click the text tool and click anywhere in the document and start entering text. The text tool is creating a free flowing text box.

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

टेक््ट टूर का उऩमोग टेक््ट को एडडट औय सेरेक्ट कयने औय टेक््ट फ्रेभ डारने के लरए ककमा जाता है। टेक््ट टूर ऩय जक्रक कयᴂ औय द्तावेज भᴂ कहीॊ बी जक्रक कयᴂ औय टेक््ट दज म कयना श셂ु कयᴂ। टेक््ट टूर एक फ्री फ़्रो टेक््ट फॉक्स फनाता है।

ROTATE TOOL

Rotate tool is used to rotate text and graphic objects. Click the rotate tool. Then click on the object reference point and drag to rotate the object.

योटेट टूर का उऩमोग टेक््ट औय ग्राकपक ऑब्जेक्ट को घभु ाने के लरए ककमा जाता है। योटेट टूर ऩय जक्रक कयᴂ। कपय ऑब्जेक्ट सॊदब म बफदॊ ु ऩय जक्रक कयᴂ औय ऑब्जेक्ट को घभु ाने के लरए खीॊचᴂ।

CROP TOOL

The Crop tool is used to crop imported graphic images to the required size. The crop tool only works on TIFF type of images. Click on the tool and, drag the image handles, to crop the image.

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

क्रॉऩ टूर का उऩमोग आमानतत धचत्रⴂ को आवश्मक आकाय भᴂ क्रॉऩ कयने के लरए ककमा जाता है। क्रॉऩ टूर केवर TIFF प्रकाय की छववमⴂ ऩय काभ कयता है। टूर ऩय जक्रक कयᴂ औय इभेज को क्रॉऩ कयने के लरए , इभेज हℂडर को ड्रगै कयᴂ।

OBLIQUE LINE TOOL

Oblique Line is used to draw slanting lines. To draw a line, click the oblique line tool, click and drag to draw a line in any direction.

नतयछी येखाओॊ को खीॊचने के लरए ओजब्रक राइन का उऩमोग ककमा जाता है। एक येखा खीॊचने के लरए, ओजब्रक राइन टूर ऩय जक्रक कयᴂ, ककसी बी ददशा भᴂ एक येखा खीॊचने के लरए जक्रक कयᴂ औय खीॊचᴂ।

CONSTRAINED LINE TOOL

Constrained Line tool will draw lines at 45 degree intervals, i.e., horizontally, vertically or diagonally.

कन््रैनड राइन टूर 45 डडग्री

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

के अॊतयार ऩय राइनᴂ खीॊचगे ा, अथामत,् ऺैनतज 셂ऩ से, रॊफवत मा नतयछे।

BOX TOOL

Box tool is used to draw a box. Click and drag to draw a Box in any direction.

फॉक्स को फनाने के लरए फॉक्स टूर का उऩमोग ककमा जाता है। ककसी बी ददशा भᴂ फॉक्स फनाने के लरए जक्रक कयᴂ औय खीॊचᴂ।

RESTANGLE FRAME

Rectangle Frame is used to type text inside a box. First select the tool and draw the area to be enclosed by the rectangular frame, then select the text tool and click inside the drawn frame to enter text. The text will be constrained to the rectangular frame.

आमत फ़्रेभ का उऩमोग ककसी फॉक्स के अॊदय टेक््ट टाइऩ कयने के लरए ककमा जाता है। ऩहरे टूर का चमन कयᴂ औय आमताकाय फ्रेभ 饍वाया सॊरग्न ककए जाने वारे ऺेत्र को ड्रा कयᴂ , कपय टेक््ट टूर चनु ᴂ औय टेक््ट को दज म कयने के लरए खीॊच े गए फ्रे भ के अॊदय जक्रक कयᴂ। टेक््ट आमताकाय फ्रे भ भᴂ दज म हो जामेगा।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

CIRCLE TOOL

Circle tool is used to draw a circle or elliptical graphic. To draw a circle or an ellipse, select the tool, click and drag to draw a circle on the document.

सकम र टूर का उऩमोग सकम र मा अण्डाकाय ग्राकपक खीॊचने के लरए ककमा जाता है। एक वत्ृ त मा दीघवम त्ृ त खीॊचने के लरए, टूर का चमन कयᴂ , द्तावेज ऩय एक वत्ृ त खीॊचने के लरए जक्रक कयᴂ औय खीॊचᴂ।

CIRCULAR FRAME

Circular Frame is used to type text inside a circle or an oval. Use the Circular frame tool to draw the frame and then click inside with the text tool to start entering text. The entered text will be constrained to the circular frame.

सकुम रय फ्रे भ का उऩमोग सकमर मा अॊडाकाय के अॊदय टेक््ट टाइऩ कयने के लरए ककमा जाता है। फ़्रेभ को खीॊचने के लरए सकुम रय फ्रे भ टूर का उऩमोग कयᴂ औय कपय टेक््ट भᴂ प्रवेश कयने के लरए टेक््ट टूर के साथ जक्रक कयᴂ। दज म ककमा गमा टेक््ट गोराकाय फ्रे भ भᴂ दज म हो जामेगा।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

POLYGON TOOL

Polygon tool is used to draw a shape with more than four sides. You can modify the polygon by selecting Element and selecting Polygon Settings.

ऩोरीगन टूर का उऩमोग चाय से अधधक ऩऺⴂ के साथ आकृ नत फनाने के लरए ककमा जाता है। आऩ एलरभᴂट का चमन कयके औय फहुबजु सेदटग्ॊ स का चमन कयके फहुबजु को सॊशोधधत कय सकते हℂ।

POLYGON FRAME

Polygon frame puts the text inside the polygon. Select the polygon frame tool, draw a polygon then select the text tool and click inside the frame to enter the text inside the frame, to enter the text inside the polygon frame.

ऩोरीगन फ़्रे भ फहुबजु के अॊदय ऩाठ डारता है। ऩोरीगन फ्रे भ टूर का चमन कयᴂ ,

फहुबजु खीॊचᴂ औय कपय टेक््ट टूर का चमन कयᴂ औय फ़्रेभ के अॊदय टेक््ट भᴂ

प्रवेश कयने के लरए फ़्रे भ के अॊदय जक्रक कय,ᴂ फहुबजु फ़्रे भ के अॊदय टेक््ट दज म कयᴂ।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

HAND TOOL

Hand tool is used to move the screen. This tool is very useful when you are working with large documents. It helps you to easily navigate in a large page. To move a screen, just select the hand tool and click and drag the page to view different parts of the page.

्क्रीन को ्थानाॊतरयत कयने के लरए हℂड टूर का उऩमोग ककमा जाता है। जफ आऩ फडे द्तावेजⴂ के साथ काभ कय यहे हℂ तो मह उऩकयण फहुत उऩमोगी है। मह आऩको एक फड े ऩष्ृ ठ ऩय आसानी से नेववगेट कयने भᴂ भदद कयता है। ्क्रीन को ्थानाॊतरयत कयने के लरए , फस हℂड टूर का चमन कयᴂ औय ऩष्ृ ठ के ववलबन्न बागⴂ को देखने के लरए ऩष्ृ ठ को जक्रक कयᴂ औय खीॊचᴂ।

ZOOM TOOL

Zoom tool allows you to zoom in and out of the document view. By default the zoom tool will be in the Zoom-in mode. To zoom out of page select the zoom tool and press control and click in the document window with the zoom tool.

जूभ टूर आऩको द्तावेज 饃श्म भᴂ जूभ इन औय आउट कयने की अनभु नत देता है। डडफॉ쥍ट 셂ऩ से जूभ टूर जूभ-इन भोड भᴂ होगा। ऩष्ृ ठ को जूभ

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

आउट कयने के लरए जूभ टूर चनु ᴂ औय कण्रोर दफाएॊ औय जूभ टूर के साथ द्तावेज ववडॊ ो भᴂ जक्रक कयᴂ।

2.5.2 Style

STYLES PALETTE

The Styles Palette is used to apply styles or to view or edit styles defined for the publication. To apply a style, just click a paragraph with the text tool and then click a style name in the palette. Choose Window and select Show Styles to display the Styles palette.

्टाइर ऩरै ेट का उऩमोग ्टाइर को रागू कयने मा प्रकाशन के लरए ऩरयबावषत ्टाइर को देखने मा सॊऩाददत कयने के लरए ककमा जाता है। ्टाइर रागू कयने के लरए, फस टेक््ट टूर के साथ एक ऩयै ाग्राप ऩय जक्रक कयᴂ औय कपय ऩरै ेट भᴂ एक ्टाइर नाभ ऩय जक्रक कयᴂ। ववडॊ ो चनु ᴂ औय ्टाइर ऩरै ेट प्रदलशतम कयने के लरए ्टाइर चनु ᴂ।

2.5.3 Menus

Menu Bar:

The standard menu bar contains all the main menus for File, Layout, Element and other utilities.

्टैण्डड म भेन ू फाय भᴂ फाइर , रेआउट, एलरभᴂट औय अन्म उऩमोधगताओॊ के लरए सबी भख्ु म भेन ू होते हℂ।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

Ruler: The top and left ruler bars helps you to precisely position the cursor, text, and graphics in the page. The Current Cursor location is shown by two dotted lines in the rulers. The view the rulers select View > Show Rulers.

शीष म औय फाएॊ 셂रय फाय आऩको ऩेज भᴂ कसयम , टेक््ट औय ग्राकपक्स को ठीक से ज्थनत देने भᴂ भदद कयता है। वतभम ान कसयम ्थान को 셂रय भᴂ दो बफदॊ ीदाय येखाओॊ 饍वाया ददखामा गमा है।

Master Page Icon:

The Master Page icon showed the position of the master Pages. Clicking it will display the Master Page. Master Pages contain text, graphics, layout and settings, which are common, thought the publication.

भा्टय ऩेज आइकन ने भा्टय ऩेज की ज्थनत को ददखामा। इसे जक्रक कयने ऩय भा्टय ऩेज प्रदलशतम होगा। भा्टय ऩेज भᴂ टेक््ट , ग्राकपक्स, रेआउट औय सेदटग्ॊ स शालभर ह,ℂ जो ऩयू े प्रकाशन भᴂ सभान यहती हℂ।

Page Icon:

The Page icon shows the list of pages in the publication with the currently selected pages in black. Clicking a particular page icon will display the selected page.

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

ऩेज आइकन वतभम ान भᴂ चमननत ऩष्ृ ठⴂ के साथ प्रकाशन भᴂ ऩष्ृ ठⴂ की सचू ी को कारे यॊग भᴂ ददखाता है। एक ववशषे ऩष्ृ ठ आइकन ऩय जक्रक कयने से चमननत ऩष्ृ ठ प्रदलशतम होगा।

Plasterboard:

Surrounding the page is an area of white space called the Plasterboard. It is used to store graphics and texts as you work. Items you place on the plasterboard are visible from any page and can be selected and moved regardless of the page you are currently working on.

ऩष्ृ ठ के चायⴂ ओय सपे द ्थान का एक ऺेत्र है जजसे प्रा्टयफोड म कहा जाता है। जैसा कक आऩ काभ कयते हℂ , इसका उऩमोग ग्राकपक्स औय ग्रॊथⴂ को सॊग्रहीत कयने के लरए ककमा जाता है। प्रा्टयफोडम ऩय आऩके 饍वाया रगाए गए आइटभ ककसी बी ऩष्ृ ठ से ददखाई देते हℂ औय आऩके 饍वाया वतभम ान भᴂ काभ कय यहे ऩष्ृ ठ की ऩयवाह ककए बफना चनु ा औय ्थानाॊतरयत ककमा जा सकता है।

FILE MENU

New: New command is used to create a new publication. This command gives rise to a dialog box where you define the various options before opening a new page of the publication.

न्य:ू नमा प्रकाशन फनाने के लरए न्म ू कभाॊड का उऩमोग ककमा जाता है। मह कभाॊड एक सॊवाद फॉक्स को जन्भ देता है जहाॊ आऩ प्रकाशन के नए ऩष्ृ ठ को खोरने से ऩहरे ववलबन्न ववक쥍ऩⴂ को ऩरयबावषत कयते हℂ।

Open: Open command allow you to open an existing PageMaker file.

ओपन: ओऩन कभाॊड आऩ को एक भौजूदा ऩेजभेकय फाइर खोरने के लरए

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

अनभु नत देते हℂ।

Save: Save command saves the current publication. To save all the open files, press the shift key while choosing the Save option.

सेव: सेव कभाॊड वतभम ान प्रकाशन को सहेजता है। सबी खुरी हुई पाइरⴂ को सहेजने के लरए, सहेजᴂ ववक쥍ऩ को चनु ते सभम लशफ्ट कॊु जी दफाएॊ।

Revert: Revert command rolls back all the changes made since the last save. It is the same as closing the publishing without saving and opening it again.

ररव셍ट: रयवटम कभाॊड अॊनतभ सेव के फाद से ककए गए सबी ऩरयवतमनⴂ को वाऩस रेती है। मह प्रकाशन को बफना सहेजे फॊद कयने औय इसे कपय से खोरने के सभान है।

Place: Place command is used to place text and graphics into the publication.

प्ऱेस: टेक््ट औय ग्राकपक्स को ऩजब्रश कयने के लरए प्रेस कभाॊड का इ्तेभार ककमा जाता है।

Acquire: The Acquire command is used to scan an image into your publication.

ए啍वायर: एक्वामय कभाॊड का उऩमोग आऩके प्रकाशन भᴂ एक छवव को ्कै न कयने के लरए ककमा जाता है।

Export: Export command lets you export you publications into the format you select.

ननमामत: ननमामत कभाॊड आऩको आऩके 饍वाया चनु े गए प्रा셂ऩ भᴂ प्रकाशनⴂ को ननमामत कयने देता है।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

EDIT MENU

Paste Multiple: Paste Multiple lets you paste multiple copies of text or graphics.

पे셍 म쥍셍ीपऱ: ऩे्ट भ쥍टीऩर आऩको टेक््ट मा ग्राकपक्स की कई कॉऩी ऩे्ट कयने देता है। Paste Special: Paste Special is used to specify the format to use when you paste an object into your publication.

पे셍 पेशऱ : ऩे्ट ्ऩेशर का उऩमोग उस प्रा셂ऩ को 'ननददमष्ट' कयने के लरए ककमा जाता है जफ आऩ ककसी व्तु को अऩने प्रकाशन भᴂ ऩे्ट कयते हℂ।

Insert Object: Insert Object is used to specify the format to be used to insert an OLE embedded object within a PageMaker publication.

इन्स셍ट ऑब्जे啍셍 : ऩेजभेकय प्रकाशन के बीतय एक OLE ए륍फेडेड ऑब्जेक्ट सज륍भलरत कयने के लरए उऩमोग ककए जाने वारे प्रा셂ऩ को ननददमष्ट कयने के लरए इन्सटम ऑब्जेक्ट का उऩमोग ककमा जाता है।

Edit Story: Edit Story is used to toggle between the word processing mode and the layout mode.

एडि셍 셍ोरी: वडम प्रोसेलसॊग भोड औय रेआउट भोड के फीच टॉगर कयने के लरए एडडट ्टोयी का इ्तेभार ककमा जाता है।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

LAYOUT MENU

Sort Pages: When you select Sort Page command, a dialog box appears with all the pages of the publication. You can rearrange the pages in the publication graphically.

सॉ셍ट पेज: जफ आऩ सॉटम ऩेज कभाॊड का चमन कयते हℂ , तो प्रकाशन के सबी ऩष्ृ ठⴂ के साथ एक सॊवाद फॉक्स ददखाई देता है। आऩ प्रकाशन भᴂ ऩष्ृ ठⴂ को येखाॊकन 饍वाया ऩनु व्मवम ज्थत कय सकते हℂ।

Column Guides: Column Guides lets you divide the pages of the publication into different column of equal size.

कॉऱम गाइि: कॉरभ गाइड आऩको प्रकाशन के ऩष्ृ ठⴂ को सभान आकाय के अरग-अरग कॉरभ भᴂ ववबाजजत कयने देता है।

Auto Flow: Auto Flow is used to flow the text onto the pages of the publication on its own from a loaded text icon. It flows the text into pages from columns to columns and also adds pages on its own depending on the availability of text.

ऑ셍ो फ्ऱो: ऑटो फ्रो का उऩमोग रोड ककए गए टेक््ट आइकन से अऩने आऩ प्रकाशन के ऩष्ृ ठⴂ ऩय टेक््ट को प्रवादहत कयने के लरए ककमा जाता है। मह टेक््ट को ऩष्ृ ठⴂ भᴂ ्तॊबⴂ से ्तॊबⴂ तक के प्रवादहत कयता है औय टेक््ट की उऩरब्धता के आधाय ऩय अऩने आऩ ऩष्ृ ठ जोडता है।

TYPE MENU

Define Styles: This option will present you a dialog box with the list of styles used in the publication. You can add, modify and delete styles from this dialog

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

box.

डिफाइन 셍ाइऱ: मह ववक쥍ऩ आऩको प्रकाशन भᴂ प्रमक्ु त ्टाइर की सचू ी के साथ एक सॊवाद फॉक्स प्र्तुत कयेगा। आऩ इस सॊवाद फॉक्स से ्टाइर को जोड , सॊशोधधत औय हटा सकते हℂ। ELEMENT MENU

Frame: Frame has options for frame alignment, position and margins.

फ़्रेम: फ़्रे भ भᴂ फ्रे भ सॊयेखण, ज्थनत औय भाजजनम के लरए ववक쥍ऩ हℂ।

Align Objects: Align Objects lets you align multiple objects relative to each other.

अऱाइन ऑब्जे啍्स: अराइन ऑब्जेक््स आऩको एक-दसू ये के साऩेऺ कई ऑब्जेक््स सॊयेखखत कयने देता है।

Link Options: Link Options is used to define whether the linked text or graphic is to be updated along with the publication in use and also its frequency.

क ऑप्शन्स: लरॊक ऑप्शन्स का उऩमोग महﴂलऱ ऩरयबावषत कयने के लरए ककमा जाता है कक लरॊक ककए गए टेक््ट मा ग्राकपक्स को उऩमोग भᴂ प्रकाशन के साथ-साथ अऩडटे ककमा जाना है औय इसकी आवजृ त्त बी।

UTILTIES MENU Plug-ins: Plug-ins has a list of sub commands, which lists out the various plug- ins, which have been included with PageMaker as additions.

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

प्ऱग-इन: प्रग-इन भᴂ उऩ-कभाॊड्स की एक सचू ी होती है , जो ववलबन्न प्रग-इन को सचू ीफद्ध कयती है , जजन्हᴂ अरग से ऩेजभेकय के साथ शालभर ककमा गमा है।

VIEW MENU

Display Master Items: Display Master Items toggle the display of items from the master pages to be reflected in the current page of the publication.

डिप्ऱे मा셍र आइ셍म : डड्प्रे भा्टय आइटभ , प्रकाशन के वतभम ान ऩष्ृ ठ भᴂ ददखाए जाने वारे भा्टय ऩष्ृ ठⴂ से आइटभ के प्रदशनम को टॉगर कयᴂ।

Display Non-Printing Items: Display Non-Printing items toggle the display of non-printing items.

WINDOW MENU

Show Tools: Hide/Show tools toggles the display of PageMaker toolbar.

शो 셍ूऱ: ऩेजभेकय टूरफाय के डड्प्रे को नछऩाएॉ / ददखाएॉ टूर। Show Control Palette: Show/Hide Control Panel toggles the display of control panel on the screen.

शो कण्ट्रोऱ पैऱे셍 : ्क्रीन ऩय ननमॊत्रण कऺ का प्रदशमन„ शो / हाईड कण्रोर ऩनै र भ‟ᴂ टॉगर कयता है।

Show Colors: Show/Hide Colors Toggles the display of the Color Palette on the screen.

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

शो कऱर : ्क्रीन ऩय करयऩैरेट के डड्प्रे को „शो/हाईड करय भᴂ ‟ टॉगर कयता है।

Show Style: Show/Hide Styles toggles the display of the Styles Palette on the screen.

शो 셍ाइऱ: ्क्रीन ऩय ्टाइ쥍सऩैरेट के डड्प्रे को „शो / हाईड ्टाइर भᴂ ‟ टॉगर कयता है। Show Layers: Show/Hide Layers toggles the display of the Layers Palette on the screen.

शो ऱेयसट: ्क्रीन ऩय रेमसमऩैरेट के डड्प्रे को „शो / हाईड रेमस म भᴂ ‟ टॉगर कयता है। Show Master Pages: Show/Hide Master Pages toggle the display of the Master Pages Palette on the screen.

शो मा셍र पेज : ्क्रीन ऩय भा्टय ऩेजऩैरेट के प्रदशमन को „शो / हाईड भा्टय ऩेज भᴂ‟ टॉगर कयता है। Show Hyperlinks: Show/Hide Hyperlinks toggles the display of the Hyperlink Palette on the screen.

क : ्क्रीन ऩय हाइऩयलरॊकऩैरेट के प्रदशमन को „शो / हाईडﴂशो हाइपरलऱ हाइऩयलरकॊ भᴂ‟ टॉगर कयता है।

2.5.4 Alignments

2.5.5 Grids & Guides

Margin Guides: Margins are defined in the Document Setup dialog box, when you first create a publication, and are applied to the Document Master page. These are represented by pink lines

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

on the top and bottom and by blue lines on the left and right.

मा셍जटन गाइ蕍स: भाजजनम को द्तावेज सेटअऩ सॊवाद फॉक्स भᴂ ऩरयबावषत ककमा जाता है , जफ आऩ ऩहरी फाय एक प्रकाशन फनाते हℂ , औय द्तावेज भा्टय ऩष्ृ ठ ऩय रागू होते हℂ। मे ऊऩय औय नीच े गुराफी येखाओॊ 饍वाया औय फाℂ ओय दाℂ ओय व नीरी येखाओॊ 饍वाया दशामए जाते हℂ। Column Guides: Column guides serve as boundaries for text you place within them. You can have as many as 20 columns per page. Column guides control the flow of text and represented by dark blue lines.

कॉऱम गाइ蕍स: कॉरभ गाइड्स टेक््ट के लरए सीभाओॊ के 셂ऩ भᴂ काम म कयती हℂ जजन्हᴂ आऩ उनके बीतय यखते हℂ। आऩके ऩास प्रनत ऩष्ृ ठ 20 से अधधक कॉरभ हो सकते हℂ। कॉरभ गाइड टेक््ट के प्रवाह को ननमॊबत्रत कयते हℂ औय गहये नीरे यॊग की येखाओॊ 饍वाया दशामए जाते हℂ।

Ruler Guides: Ruler Guides are also nonprinting guidelines which primarily used to align. Objects in the publication and are represented on the screen by Light blue lines.

셂ऱर गाइ蕍स: 셂रय गाइड्स बी नॉनवप्रजन्टॊग ददशा-ननदेश हℂ जो भख्ु म 셂ऩ से सॊयेखखत कयने के लरए उऩमोग ककए जाते हℂ। प्रकाशन भᴂ ऑब्जेक््स औय ्क्रीन ऩय राइट ब्र ू राइन्स 饍वाया दशामए गए ह ℂ

2.6 Keyboard shortcuts

Ctrl + N = New Ctrl + O = Open Ctrl + S = Save Ctrl + W = Close Ctrl + Shift + S = Save As Ctrl + D = Place Ctrl + Shift + D = Link Manager Ctrl + Shift + P = Document Setup Ctrl + P = Print Ctrl + K = General

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

Ctrl + Q = Quite Ctrl + A = Select All Ctrl + C = Copy Ctrl + V = Paste Ctrl + Z = Undo Ctrl + E = Edit story Ctrl + Shift + > = Increase Font Size Alt + Ctrl + G = Go to Ctrl + Shift + > = Increase Font size Ctrl + Alt + > = Standard Size Ctrl + Shift + < = Decrease Font Size Ctrl + Shift + B = Bold Ctrl + Shift + I = Italic Ctrl + Shift + U = Underline Ctrl + Shift + C = Centre Align Ctrl + Shift + J = Justify Ctrl + Shift + L = Left Align Ctrl + Shift + R = Right Align Ctrl + Shift + / = Strikethrough Ctrl + Shift + V = Reverse Ctrl + T = Character Specs Ctrl + U = File & Stroke Ctrl + Shift + K = All Caps Ctrl + \ = Subscript Ctrl + Shift + \ = Superscript Ctrl + M = Paragraph Ctrl + I = Indents/Tabs Ctrl+3 = Define Style Alt + Ctrl + F = Frame Option Ctrl +} = Bring To Front Ctrl + {= Send To Back Ctrl + Shift +} = Send Backward Ctrl + Shift + {= Bring Forward Ctrl + Shift + E = Align Object Ctrl + Alt + E = Text Wrap Ctrl + G = Group Ctrl + Shift + G = Ungroup Ctrl + L = Lock Position Ctrl + 6 = Mask Ctrl + Shift + 6 = Unmask Alt + Ctrl + L = Unlock Ctrl + F = Find Ctrl + H = Change Ctrl + L = Spelling Ctrl + Y = Index Entry Ctrl + + = Zoom In Ctrl + - = Zoom Out Ctrl + 1= Actual Size Ctrl + 2 = 200 Percent Ctrl + 4 = 400 Percent Ctrl + 5 = 500 Percent

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

Ctrl + 7 = 75 percent Ctrl + 0 = Fit in Window Ctrl + R = Show/Hide Ruler Ctrl + J = Show/hide Color

2.7 Page Layouts How to Create a Document in Page maker

After getting acquainted with PageMaker, you can use it to publish a publication which we also call Document. It is ready to be prepared, for this, we first open a new blank document, then we put the text, pictures etc. according to our requirement, thus a complete document is prepared which we get printed on a printer.

ऩेजभेकय से ऩरयधचत होने के फाद आऩ उसका उऩमोग कयके कोई प्रकाशन जजसे हभ द्तावेज (Document) बी कहते है। फनाने के लरए तैमाय है इसके लरए सफसे ऩहरे हभ एक नमा खारी द्तावेज खोर रेते है कपय उसभे अऩनी आवश्मकता के अनसु ाय ऩाठ्म , धचत्र आदद साभाग्री रगाते जाते है इस प्रकाय एक ऩयू ा द्तावेज तैमाय हो जाता है जजसे हभ ककसी वप्रटॊय ऩय छऩवा रेते है। PAGE SIZE AND PAPER SIZE

Paper size is the actual size of the paper and Page Size is the printable area of the page. The Page size is the area enclosed by the page margins.

'ऩेऩय साइज' ऩेऩय का वा्तववक आकाय है औय 'ऩेज साइज' ऩेज का वप्रॊट कयने मोग्म ऺेत्र है। ऩेज साइज ऩेज भाजजमन से नघया ऺेत्र है।

CONTROL PALETTE

The control Palette displays the properties for the selected paragraph, character or object. It is a sort of shortcut to the object, text, and paragraph properties. Choose Window and select Show Control Palette to display the Control palette.

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

'ननमॊत्रणऩैरेट ' चमननत ऩैयाग्राप , चरयत्र मा ऑब्जेक्ट के लरए गुणⴂ को प्रदलशमत कयता है। मह ऑब्जेक्ट , टेक््ट औय ऩयै ाग्राप गुणⴂ के लरए एक प्रकाय का शॉटमकट है। ववडॊ ो चनु ᴂ औय कॊ रोर ऩरै ेट प्रदलशतम कयने के लरए शो कॊ रोर ऩरै ेट चनु ᴂ

Control Palette in Object Mode

The control Palette when it has an object selected displays the object properties such as the reference point, position, size, scaling, cropping, printer resolution, and rotating, skewing and horizontal and vertical reflection.

ननमॊत्रणऩैरेट जफ उसका कोई ऑब्जेक्ट चमननत होता है , तो ऑब्जेक्ट गुण जैसे कक सॊदब म बफदॊ ,ु ज्थनत, आकाय, ्केलरॊग, क्रॉवऩॊग, वप्रटॊ य रयजॉ쥍मशू न, औय घणू नम , नतयछा औय ऺैनतज औय ऊध्वामधय प्रनतबफॊफ प्रदलशमत कयता है।

Horizontal/vertical mirror: Mirrors the currently selected object along the x

or y-axis.

हॉररजॉन्셍ऱ/वेर्셍टकऱ लमरर: x मा y- अऺ के साथ वतभम ान भᴂ चमननत ऑब्जेक्ट को प्रनतबफॊबफत कयता है।

Height/width: sets the height and width of the currently selected object, either numerically in inches or in percentage of the current size.

हाइ셍/वव蕍थ: वतभम ान भᴂ चमननत व्तु की ऊॉ चाई औय चौडाई मा तो सॊख्मात्भक 셂ऩ से इॊच भᴂ मा वतभम ान आकाय के प्रनतशत भᴂ सेट होती है।

Rotate: Rotate, is used to rotate the selected object around an axis. The center of rotation is set as the object‟s center and exact measurements can be used.

रो셍े셍: योटेट का उऩमोग ककसी अऺ के चायⴂ ओय चमननत ऑब्जेक्ट को घभु ाने

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

के लरए ककमा जाता है। योटेशन के कᴂ द्र को ऑब्जेक्ट के कᴂ द्र के 셂ऩ भᴂ सेट ककमा गमा है औय सटीक भाऩ का उऩमोग ककमा जा सकता है।

XY position: sets the horizontal and vertical position of the upper-left corner of the currently selected object.

XY पोजीशन: वतभम ान भᴂ चमननत ऑब्जेक्ट के ऊऩयी-फाएॉ कोने की ऺैनतज औय ऊध्वामधय ज्थनत सेट कयता है।

Control Palette in Character Mode

The Character Palette is displayed when the text tool is selected. It has options for changing text styles, size, leading, tracking, width and Deming. There is a toggle button to shift between paragraph view and character view.

टेक््ट टूर का चमन कयने ऩय 'कैयेक्टय ऩैरेट ' प्रदलशतम होता है। इसभᴂ टेक््ट ्टाइर, आकाय, रीडडॊग, रैककॊ ग, चौडाई औय डले भगॊ फदरने के ववक쥍ऩ हℂ। ऩयै ाग्राप व्म ू औय कै येक्टय व्म ू के फीच लशफ्ट कयने के लरए टॉगर फटन है।

Kerning: Text Kerning adjusts the spacing between characters in text. It is selective, so you can adjust just one or two characters, or whole sections of text, Negative numbers move characters closer together, whereas Positive numbers space them out.

ग: टेक््ट केरयॊग टेक््ट भᴂ वणⴂ के फीच अॊतय को सभामोजजत कयता है। महﴂकेरर चमनात्भक है, इसलरए आऩ केवर एक मा दो वणⴂ को सभामोजजत कय सकते हℂ, मा टेक््ट के ऩयू े खॊडⴂ को, नकायात्भक सॊख्माएॊ वणⴂ को एक साथ कयीफ रे जाती हℂ, जफकक सकायात्भक सॊख्माएॊ उन्हᴂ फाहय ननकारती हℂ।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

Leading: Text Leading adjusts the spacing between lines of text. This is applicable on line-by-line basis. Positive and Negative number have the same effect as they have on Kerning, except that the spacing is between the lines of text.

ग: टेक््ट रीडडॊग टेक््ट की राइनⴂ के फीच रयजक्त को सभामोजजतﴂऱीडि कयता है। मह राइन-फाम-राइन आधाय ऩय रागू होता है। ऩॉजजदटव औय नेगेदटव नॊफय का उतना ही प्रबाव ऩडता है , जजतना कक केरयॊग ऩय ऩडता है , लसवाम इसके कक रयजक्त टेक््ट की येखाओॊ के फीच होती है।

Tracking: Text Tracking adjusts how closely characters follow each other. Very tight tracking brings text closer together, very loose spreads it out a bit.

ग: टेक््ट रैककॊ ग सभामोजजत कयती है कक वण म एक दसू ये के ककतने ﴂरैकक ननकट आते हℂ। फहुत तॊग रैककॊ ग टेक््ट को एक साथ सभीऩ राती है , फहुत ढीरा इसे थोडा पैराता है।

Size: Text Size adjusts point size of text.

साइज: टेक््ट साइज, टेक््ट के बफदॊ ु आकाय को सभामोजजत कयता है।

Position: Text Position adjusts the placement of the text on a given line. Positive Numbers move the text into a super text position (above the line), and Negative numbers move it into a subtext position (below the line).

पो셍शन: टेक््ट ऩोजजशन ककसी ददए गए राइन ऩय ऩाठ के ्थान को सभामोजजत कयता है। सकायात्भक सॊख्माएॊ ऩाठ को एक सऩु य टेक््ट ज्थनत (राइन के ऊऩय) भᴂ रे जाती हℂ , औय नकायात्भक सॊख्माएॊ इसे एक सफटेक््ट ज्थनत (राइन के नीचे) भᴂ रे जाती हℂ।

Width: Text Width adjusts the character width and does not affect height. The larger the percentage, the wider the word. Percentages over 100% make it proportionate larger than standard sizing, fewer than 100% make it proportionate

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

smaller.

वव蕍थ: टेक््ट ववड्थ वणम चौडाई को सभामोजजत कयती है औय ऊॊचाई को प्रबाववत नहीॊ कयती है। फडा प्रनतशत , व्माऩक शब्द। 100% से अधधक प्रनतशत मह भानक आकाय से फडा आनऩु ानतक फनाता है , 100% से कभ इसे आनऩु ानतक 셂ऩ से छोटा फनाता है।

Control Palette in Paragraph mode

The control palette displays options for the paragraph style, alignment, indents, spacing, grid spacing and grid alignment.

कण्रोर ऩैरेट ऩैयाग्राप ्टाइर, सॊयेखण, इॊडᴂट, रयजक्त, धग्रड रयजक्त औय धग्रड सॊयेखण के ववक쥍ऩ प्रदलशमत कयता है।

COLOR PALETTE

The Color Palette is used to apply colors or view the name or kind of color applied to the selected text or object. The buttons stroke, fill or both, can be used to change the color of the graphic object and Object level. Tints allow you to have variations of the same color. To apply a color to a text or object and select the color from the color Palette. Choose Window and select Show Colors, to display the Colors

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

palette.

करय ऩैरेट का उऩमोग यॊगⴂ को रागू कयने मा चमननत टेक््ट मा ऑब्जेक्ट ऩय रागू यॊग मा नाभ को देखने के लरए ककमा जाता है। फटन ्रोक , बयण मा दोनⴂ , का उऩमोग ग्राकपक ऑब्जेक्ट औय ऑब्जेक्ट ्तय के यॊग को फदरने के लरए ककमा जा सकता है। दटन्स आऩको एक ही यॊग के फदराव कयने की अनभु नत देते हℂ। ककसी टेक््ट मा व्तु ऩय यॊग रगाने के लरए औय यॊग ऩरै ेट से यॊग का चमन कयने के लरए। ववडॊ ो चनु ᴂ औय करस म ऩरै ेट प्रदलशतम कयने के लरए शो करस म का चमन कयᴂ।

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP

2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP