DOCSLIB.ORG

Guidelines for Aircraft Ground Icing Operations

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Guidelines for Aircraft Ground Icing Operations TP 14052E (08/2019) Guidelines for Aircraft Ground Icing Operations Issue 4 Other related TC Publications: TP 10643E ............................ Manual, 2004 Previous Edition: 3rd Edition, 2018 Printed in Canada Please direct your comments, orders and inquiries to: Transport Canada Civil Aviation Communications Centre (AARC) Place de Ville Tower C, 5th Floor 330 Sparks Street Ottawa, ON K1A 0N8 Telephone: 1 800 305-2059 Fax: 613 957-4208 E-mail: [email protected] ©Her Majesty the Queen in Right of Canada, as represented by the Minister of Transport 2019 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the Department of Transport, Canada. Please contact the Civil Aviation Communications Centre at 1 800 305-2059 (EST) for assistance. The information in this publication is to be considered solely as a guide and should not be quoted as or considered to be a legal authority. It may become obsolete in whole or in part at any time without notice. TP 14052E (08/2019) Guidelines for Aircraft Ground Icing Operations TP 14052E HOW TO USE THIS DOCUMENT This document’s table of contents is arranged in a manner that is intended to suggest a logical flow of information. The Chapter names have been chosen to accurately reflect the content. Air Operators are advised to start with the Chapter entitled: “Ground Icing Program Guidelines”. This Chapter outlines the required contents of an approved aircraft ground icing program. Each section of the Ground Icing Program chapter refers in turn to other chapters of the document for additional detail. Other document users may choose to refer to the table of contents Chapter names to guide their search for information and guidance. Document specific term definitions are located in the Glossary chapter, and acronyms are presented in a specific chapter, both are located at the back of the document. Numerous references and other documents of interest have been identified in the References chapter. Reader may choose to enhance their knowledge of specific issues by researching the listed documents. The use of this document is not mandated by Regulation; however, if the Guidance in this document is followed then the following words, within the context of this document, take on a particular connotation: 1. Should Should means that it is advisable to follow the suggested activity, process or practise. 2. Must/Shall Must or Shall means that the suggested activity, process or practise needs to be followed because there are significant safety implications. Page 3 08 2019 TP 14052E Guidelines for Aircraft Ground Icing Operations FOREWORD This Guidance document contains information applicable to the Operation of Aircraft in Canada under Ground Icing Conditions. The information herein derives from many sources. It comes from operational experience, from scientific fact, from testing and evaluation, and from Regulation. It is intended that all of those involved in Ground Icing Operations will find some information in this document that will assist them in their understanding of such operations. There are a very large number of variables involved in operating aircraft during ground icing conditions. For this reason it is difficult to prescribe a solution for each and every situation that may arise. Therefore, this document generally identifies the principles at play and it is understood that a large measure of sound judgement will be required in many instances to ensure the continuance of safe aircraft operations under ground icing conditions. A Ground Icing Operations specialist is available at Transport Canada Headquarters, Commercial Flight Standards Division for consultation. Robert Sincennes Director, Standards Branch Civil Aviation Transport Canada Page 4 08 2019 Guidelines for Aircraft Ground Icing Operations TP 14052E CHANGE CONTROL RECORDS Description of Change Edition 4 replaces the previous Edition of TP14052E dated June 2018. Furthermore a significant amount of additional material has been included in this new edition. Edition 4 should be used in conjunction with the HOT Guidelines as published on the Transport Canada website at: http://www.tc.gc.ca. Future releases of this document will include sidebars to indicate text, which has been added, delete or modified. REVISION DATE DESCRIPTION OF CHANGES AFFECTED PAGES Edition 2 April 2005 Release of Edition 2 of TP 14052E All Edition 3 June 2018 Release of Edition 3 of TP 14052E All Minor edits throughout document. Significant changes on the Edition 4 August 2019 Release of Edition 4 of TP 14052E following pages: 27-28, 36, 62, 79- 80, 82-83, 89, 98, 100, 109, 118- 120, 121-122 and 132 Page 5 08 2019 TP 14052E Guidelines for Aircraft Ground Icing Operations Table of Contents HOW TO USE THIS DOCUMENT................................................................................................................ 3 FOREWORD ............................................................................................................................................. 4 CHANGE CONTROL RECORDS ................................................................................................................... 5 Description of Change ......................................................................................................................... 5 CHAPTER 1 ............................................................................................................................................ 21 Introduction ...................................................................................................................................... 21 1.1 Background ........................................................................................................................ 21 1.2 Purpose of the Document................................................................................................... 21 1.3 Hazards of Ice, Snow and Frost ........................................................................................... 21 1.4 Canadian Aviation Regulations and Standards .................................................................... 22 1.4.1 General Operating Flight Rules and Standards ................................................................ 22 1.4.2 Commercial Air Service — Aerial Work ........................................................................... 22 1.4.3 Commercial Air Service — Air Taxi Operations ................................................................ 23 1.4.4 Commercial Air Service — Commuter Operations ........................................................... 23 1.4.5 Commercial Air Service — Airline Operations ................................................................. 23 CHAPTER 2 Ground Icing Program Guidelines ................................................................................... 24 2.1 Development of an Approved Ground Icing Program (AGIP) ............................................... 24 2.2 Elements of an Approved Ground Icing Program ................................................................ 24 2.2.1 Introduction and Responsibilities .................................................................................... 24 2.2.2 Definitions ...................................................................................................................... 25 2.2.3 Air Operator Management Plan ...................................................................................... 26 2.2.3.1 Approved Ground Icing Program Responsibility .......................................................... 26 2.2.3.2 Quality Organization and Safety Management System ................................................ 27 2.2.3.3 Record keeping ........................................................................................................... 27 Page 6 08 2019 Guidelines for Aircraft Ground Icing Operations TP 14052E 2.2.4 Training and Testing ....................................................................................................... 27 2.2.4.1 Initial training for flight crew and other operations personnel .................................... 27 2.2.4.2 Recurrent training for flight crew and other operations personnel .............................. 28 2.2.4.3 Initial training for ground deicing crews and maintenance personnel .......................... 28 2.2.4.4 Recurrent training for ground deicing crews and maintenance personnel ................... 28 2.2.5 Personnel Safety ............................................................................................................. 29 2.2.6 Communications ............................................................................................................ 29 2.2.7 Aircraft Deicing/Anti-icing............................................................................................... 29 2.2.7.1 Fluids .......................................................................................................................... 29 2.2.7.2 Equipment .................................................................................................................. 30 2.2.7.3 Procedures and Preventative Measures ...................................................................... 30 2.2.8 Holdover Times .............................................................................................................. 30 2.2.9 Operational
Load more

Recommended publications
  • CAAM 3 Report
    3rd Technical Report On Propulsion System and Auxiliary Power Unit (APU) Related Aircraft Safety Hazards A joint effort of The Federal Aviation Administration and The Aerospace Industries Association March 30, 2017 Questions concerning distribution of this report should be addressed to: Federal Aviation Administration Manager, Engine and Propeller Directorate. TABLE OF CONTENTS Page Table of Contents iii List of Figures v I. Foreword 1 II. Background 1 III. Scope 2 IV. Discussion 3 V. Relationship to Previous CAAM Data 7 VI. General Notes and Comments 8 VII. Fleet Utilization 11 VIII. CAAM3 Team Members 12 IX. Appendices List of Appendices 13 Appendix 1: Standardized Aircraft Event Hazard Levels and Definitions 14 • General Notes Applicable to All Event Hazard Levels 19 • Rationale for Changes in Severity Classifications 19 • Table 1. Historical Comparison of Severity Level Descriptions and Rationale for CAAM3 Changes 21 Appendix 2: Event Definitions 39 Appendix 3: Propulsion System and Auxiliary Power Unit (APU) Related Aircraft Safety Hazards (2001 through 2012) 44 • Uncontained Blade 44 • Uncontained Disk 50 • Uncontained – Other 56 iii • Uncontained – All Parts 62 • High Bypass Comparison by Generation 63 • Relationship Among High Bypass Fleet 64 • Case Rupture 66 • Case Burnthrough 69 • Under-Cowl Fire 72 • Strut/Pylon Fire 76 • Fuel Leak 78 • Engine Separation 82 • Cowl Separation 85 • Propulsion System Malfunction Recognition and Response (PSMRR) 88 • Crew Error 92 • Reverser/Beta Malfunction – In-Flight Deploy 96 • Fuel Tank Rupture/Explosion 99 • Tailpipe Fire 102 • Multiple-Engine Powerloss – Non-Fuel 107 • Multiple-Engine Powerloss – Fuel-Related 115 • Fatal Human Ingestion / Propeller Contact 120 • IFSD Snapshot by Hazard Level – 2012 Data Only 122 • RTO Snapshot by Hazard Level – 2012 Data Only 123 • APU Events 123 • Turboprop Events 124 • Matrices of Event Counts, Hazard Ratios and Rates 127 • Data Comparison to Previous CAAM Data 135 [ The following datasets which were collected in CAAM2 were not collected in CAAM3.
    [Show full text]
  • Propeller Operation and Malfunctions Basic Familiarization for Flight Crews
    PROPELLER OPERATION AND MALFUNCTIONS BASIC FAMILIARIZATION FOR FLIGHT CREWS INTRODUCTION The following is basic material to help pilots understand how the propellers on turbine engines work, and how they sometimes fail. Some of these failures and malfunctions cannot be duplicated well in the simulator, which can cause recognition difficulties when they happen in actual operation. This text is not meant to replace other instructional texts. However, completion of the material can provide pilots with additional understanding of turbopropeller operation and the handling of malfunctions. GENERAL PROPELLER PRINCIPLES Propeller and engine system designs vary widely. They range from wood propellers on reciprocating engines to fully reversing and feathering constant- speed propellers on turbine engines. Each of these propulsion systems has the similar basic function of producing thrust to propel the airplane, but with different control and operational requirements. Since the full range of combinations is too broad to cover fully in this summary, it will focus on a typical system for transport category airplanes - the constant speed, feathering and reversing propellers on turbine engines. Major propeller components The propeller consists of several blades held in place by a central hub. The propeller hub holds the blades in place and is connected to the engine through a propeller drive shaft and a gearbox. There is also a control system for the propeller, which will be discussed later. Modern propellers on large turboprop airplanes typically have 4 to 6 blades. Other components typically include: The spinner, which creates aerodynamic streamlining over the propeller hub. The bulkhead, which allows the spinner to be attached to the rest of the propeller.
    [Show full text]
  • Propulsion Systems for Aircraft. Aerospace Education II
    . DOCUMENT RESUME ED 111 621 SE 017 458 AUTHOR Mackin, T. E. TITLE Propulsion Systems for Aircraft. Aerospace Education II. INSTITUTION 'Air Univ., Maxwell AFB, Ala. Junior Reserve Office Training Corps.- PUB.DATE 73 NOTE 136p.; Colored drawings may not reproduce clearly. For the accompanying Instructor Handbook, see SE 017 459. This is a revised text for ED 068 292 EDRS PRICE, -MF-$0.76 HC.I$6.97 Plus' Postage DESCRIPTORS *Aerospace 'Education; *Aerospace Technology;'Aviation technology; Energy; *Engines; *Instructional-. Materials; *Physical. Sciences; Science Education: Secondary Education; Textbooks IDENTIFIERS *Air Force Junior ROTC ABSTRACT This is a revised text used for the Air Force ROTC _:_progralit._The main part of the book centers on the discussion -of the . engines in an airplane. After describing the terms and concepts of power, jets, and4rockets, the author describes reciprocating engines. The description of diesel engines helps to explain why theseare not used in airplanes. The discussion of the carburetor is followed byan explanation of the lubrication system. The chapter on reaction engines describes the operation of,jets, with examples of different types of jet engines.(PS) . 4,,!It********************************************************************* * Documents acquired by, ERIC include many informal unpublished * materials not available from other souxces. ERIC makes every effort * * to obtain the best copravailable. nevertheless, items of marginal * * reproducibility are often encountered and this affects the quality * * of the microfiche and hardcopy reproductions ERIC makes available * * via the ERIC Document" Reproduction Service (EDRS). EDRS is not * responsible for the quality of the original document. Reproductions * * supplied by EDRS are the best that can be made from the original.
    [Show full text]
  • Turbofan Engine Malfunction Recognition and Response Final Report
    07/17/09 Turbofan Engine Malfunction Recognition and Response Final Report Foreword This document summarizes the work done to develop generic text and video training material on the recognition and appropriate response to turbofan engine malfunctions, and to develop a simulator upgrade package improving the realism of engine malfunction simulation. This work was undertaken as a follow-on to the AIA/AECMA report on Propulsion System Malfunction Plus Inappropriate Crew Response (PSM+ICR), published in 1998, and implements some of the recommendations made in the PSM+ICR report. The material developed is closely based upon the PSM+ICR recommendations. The work was sponsored and co-chaired by the ATA and FAA. The organizations involved in preparation and review of the material included regulatory authorities, accident investigation authorities, pilot associations, airline associations, airline operators, training companies and airplane and engine manufacturers. The FAA is publishing the text and video material, and will make the simulator upgrade package available to interested parties. Reproduction and adaptation of the text and video material to meet the needs of individual operators is anticipated and encouraged. Copies may be obtained by contacting: FAA Engine & Propeller Directorate ANE-110 12 New England Executive Park Burlington, MA 01803 1 07/17/09 Contributing Organizations and Individuals Note: in order to expedite progress and maximize the participation of US airlines, it was decided to hold all meetings in North America. European regulators, manufacturers and operators were both invited to attend and informed of the progress of the work. Air Canada Capt. E Jokinen ATA Jim Mckie AirTran Capt. Robert Stienke Boeing Commercial Aircraft Van Winters CAE/ Flight Safety Boeing Capt.
    [Show full text]
  • Federal Register/Vol. 72, No. 156/Tuesday, August 14, 2007
    45308 Federal Register / Vol. 72, No. 156 / Tuesday, August 14, 2007 / Rules and Regulations TABLE 2.—REQUIRED MATERIAL INCORPORATED BY REFERENCE Airbus service information Date All Operators Telex A300–600–55A6032 ......................................................................................................................................... June 23, 2004. All Operators Telex A310–55A2033 ................................................................................................................................................. June 23, 2004. Service Bulletin A300–55–6039, including Appendix 01 .................................................................................................................. June 7, 2006. Service Bulletin A310–55–2040, including Appendix 01 .................................................................................................................. June 7, 2006. If you accomplish the optional actions this AD to perform those actions, unless the specified in this AD, you must use the AD specifies otherwise. service documents identified in Table 3 of TABLE 3.—OPTIONAL MATERIAL INCORPORATED BY REFERENCE Airbus service information Date Service Bulletin A300–55–6040 ....................................................................................................................................................... June 5, 2006. Service Bulletin A310–55–2041 ......................................................................................................................................................
    [Show full text]
  • Cessna Citation Latitude / C680a Cc-Axz” Aviasur
    DEPARTAMENTO “SEGURIDAD OPERACIONAL” SUBDEPARTAMENTO “LICENCIAS” SECCIÓN EVALUACIONES “CESSNA CITATION LATITUDE / C680A CC-AXZ” AVIASUR NOMBRE : _____________________________________ FIRMA: _________ FECHA : ____________________ A.- Limitations 1.- Airspeed limitations 3.- Weigth (lbs) KIAS/Mach Maximum design ramp 31.050 weight Pounds MMO (Above 29.833 Mach 0.80 feet) (indicated) Maximum design take 30.800 off weight (MTOW) Pounds VMO (Between 8000 and 305 KIAS 29.833 feet) Maximum design 27.575 landing weigt (MLW) Pounds VMO (below 8000 feet) 270 KIAS Maximum design zero 21.200 Vlo 210 KIAS fuel weight (MZFW) Pounds Vle 210 KIAS 4.- Electrical power system Vsb (maximum speed No limit Ground 300 Amps brake operation speed) Air < FL350 300 Amps Maximum tire ground 182 Knots speed >FL350 and <FL450 275 Amps Maximum autopilot 305 KIAS Battery start limit Three (3) engine operation speed or Mach starts per hour 0.80 2.- Take off and landing limits Maximum altitude limit 14.000 feet Maximum tailwind 10 Knots component 1 B.- EMERGENCIES / ABNORMAL PROCEDURES APU FIRE 1. APU FIRE Button....................................................................................................Push AT HOLD FAIL 1. Takeoff..................................................................................................................Abort BATTERY O’TEMP L and/or R 1. BATT Button (affected side).....................................................................................OFF CABIN ALTITUDE 1. Oxygen Masks...............................................................................................Don
    [Show full text]
  • Flight Tests of Turboprop Engine with Reverse Air Intake System
    TRANSACTIONS OF THE INSTITUTE OF AVIATION 3 (252) 2018, pp. 26–36 DOI: 10.2478/tar-2018-0020 © Copyright by Wydawnictwa Naukowe Instytutu Lotnictwa FLIGHT TESTS OF TURBOPROP ENGINE WITH REVERSE AIR INTAKE SYSTEM Marek Idzikowski, Wojciech Miksa Instytut Lotnictwa, Centrum Nowych Technologii Al. Krakowska 110/114, 02-256 Warsaw, Poland [email protected] Abstract This work presents selected results of I-31T propulsion flight tests, obtained in the framework of ESPOSA (Efficient Systems and Propulsion for Small Aircraft) project. I-31T test platform was equipped with TP100, a 180 kW turboprop engine. Engine installation design include reverse flow inlet and separator, controlled from the cockpit, that limited ingestion of solid particulates during ground operations. The flight tests verified proper air feed to the engine with the separator turned on and off. The carried out investigation of the intake system excluded possibility of hazardous engine -op eration, such as compressor stall, surge or flameout and potential airflow disturbance causing damaging vibration of the engine body. Finally, we present evaluation of total power losses associated with engine integration with the airframe. Keywords: light aircraft, flight tests, turboprop engine installation, turboprop engine integration, reverse air flow to engine. Abbreviations: oC – Celsius degree, temperature unit km/h – kilometers per hour, speed unit ∆P – power loss m – meter, altitude and length unit ∆TORQ – engine torque loss at shaft mm/s – millimeter per second, imbalance
    [Show full text]
  • Aircraft Accident Report — North Central Airlines, Inc., Convair 580
    TRANSPORTATION I SAFETY BOARD WASHINGTON, LC. 20594 .- ERRATA AIRCRAFT ACCIDENT REPORT - North Central Airlines, Inc. Convsir 580, N4825C, Kalamazoo Municipal Airport, Kalamazoo, Michigan, July 25, 1978, Report Number - NTSB-AAR-79-4 Substitute the following paragraph for paragraph 4 on page 14: I "At a gross weight of 49,130 lbs, with a 15O flap setting, and in coordinated flight, the following speeds are applicable: -3/ Vl = 107 KIM '2 '2 = 111 KIM vS Z 91 KIAS (88 TIS calibrated airspeed -KCAS) @ lG/zero thrust/gear down 'S Y 98 KIM (95 KCAS) @ 30° banh/zero thrust/gear down vmc 5 88 KIAS (85 KCAS) @ wings level/unaccelerated flight At loo flaps: vS 9 94 KIM (91 KCAS) @ lG/zero thrust/gear down vS 25 101 KIAS (98 KCAS) @ 300 bank/zero thrust/gear down 'mc 'mc 3 88 KIAS (85 KCAS) @ wings level/unaccelerated flight" . ' April 2, 1979 UNITED STATES GOVERNMENT TECHNICAL REPORT DOCUMENTATION PAGE 1. Report No. 2.Government Accession No. 3.Recipient's Catalog No. NTSB-AAR-79-4 4. Title and Subtitle Aircraft Accident Report -- 5.Report Date North Central Airlines, Inc., Convair 580, N4825C, February 22, 1979 Kalamazoo Municipal Airport, Kalamazoo, Michigan, 6.Performing Organization July 25. 1978 Code 7. Author(s) 8.Performing Organization Report No. 9. Performing Organization Name and Address 10.Work Unit No. 2583 National Transportation Safety Board Il.Contract or Grant No. Bureau of Accident Investiaation- Washington, D. C. 20594 13.Type of Report and Period Covered 12.Sponsoring Agency Name and Address Aircraft Accident ReDort.~ July 25, 1978 NATIONAL TRANSPORTATION SAFETY BOARD Washington, D.
    [Show full text]
  • The Power for Flight: NASA's Contributions To
    The Power Power The forFlight NASA’s Contributions to Aircraft Propulsion for for Flight Jeremy R. Kinney ThePower for NASA’s Contributions to Aircraft Propulsion Flight Jeremy R. Kinney Library of Congress Cataloging-in-Publication Data Names: Kinney, Jeremy R., author. Title: The power for flight : NASA’s contributions to aircraft propulsion / Jeremy R. Kinney. Description: Washington, DC : National Aeronautics and Space Administration, [2017] | Includes bibliographical references and index. Identifiers: LCCN 2017027182 (print) | LCCN 2017028761 (ebook) | ISBN 9781626830387 (Epub) | ISBN 9781626830370 (hardcover) ) | ISBN 9781626830394 (softcover) Subjects: LCSH: United States. National Aeronautics and Space Administration– Research–History. | Airplanes–Jet propulsion–Research–United States– History. | Airplanes–Motors–Research–United States–History. Classification: LCC TL521.312 (ebook) | LCC TL521.312 .K47 2017 (print) | DDC 629.134/35072073–dc23 LC record available at https://lccn.loc.gov/2017027182 Copyright © 2017 by the National Aeronautics and Space Administration. The opinions expressed in this volume are those of the authors and do not necessarily reflect the official positions of the United States Government or of the National Aeronautics and Space Administration. This publication is available as a free download at http://www.nasa.gov/ebooks National Aeronautics and Space Administration Washington, DC Table of Contents Dedication v Acknowledgments vi Foreword vii Chapter 1: The NACA and Aircraft Propulsion, 1915–1958.................................1 Chapter 2: NASA Gets to Work, 1958–1975 ..................................................... 49 Chapter 3: The Shift Toward Commercial Aviation, 1966–1975 ...................... 73 Chapter 4: The Quest for Propulsive Efficiency, 1976–1989 ......................... 103 Chapter 5: Propulsion Control Enters the Computer Era, 1976–1998 ........... 139 Chapter 6: Transiting to a New Century, 1990–2008 ....................................
    [Show full text]
  • Aircraft Engine Operation and Malfunction
    Airplane Turbofan Engine Operation and Malfunctions Basic Familiarization for Flight Crews Chapter 1 General Principles Introduction the flight crew's understanding and Today's modern airplanes are powered working knowledge of airplane turbine by turbofan engines. These engines are engine operation and malfunctions to the quite reliable, providing years of trouble- topics and depth covered here. Upon free service. However, because of the completing this material, flight crews rarity of turbofan engine malfunctions, should understand that some engine and the limitations of simulating those malfunctions can feel and sound more malfunctions, many flight crews have severe than anything they have ever felt unprepared to diagnose engine experienced; however, the airplane is malfunctions that have occurred. still flyable, and the first priority of the flight crew should remain "fly the The purpose of this text is to provide airplane." straightforward material to give flight crews the basics of airplane engine Propulsion operational theory. This text will also provide pertinent information about malfunctions that may be encountered during the operation of turbofan- powered airplanes, especially those malfunctions that cannot be simulated well and may thus cause confusion. While simulators have greatly improved pilot training, many may not have been programmed to simulate the actual noise, vibration and aerodynamic forces that certain malfunctions cause. In addition, Fig 1 showing balloon with no escape path for it appears that the greater the sensations, the air inside. All forces are balanced. the greater the startle factor, along with greater likelihood the flight crew will try Propulsion is the net force that results to diagnose the problem immediately from unequal pressures.
    [Show full text]
  • Engine Failure Involving Fokker 100, VH-FWI, 41 Km South East of Geraldton Airport, Western Australia on 9 July 2019
    Engine failure involving Fokker 100, VH-FWI 41 km south-east of Geraldton Airport, Western Australia on 9 July 2019 ATSB Transport Safety Report Aviation Occurrence Investigation (Defined) AO-2019-033 Final – 4 February 2021 Cover photo: Copyright ® TommyNg (Planespotters.net) Released in accordance with section 25 of the Transport Safety Investigation Act 2003 Publishing information Published by: Australian Transport Safety Bureau Postal address: PO Box 967, Civic Square ACT 2608 Office: 62 Northbourne Avenue Canberra, ACT 2601 Telephone: 1800 020 616, from overseas +61 2 6257 2463 Accident and incident notification: 1800 011 034 (24 hours) Email: [email protected] Website: www.atsb.gov.au © Commonwealth of Australia 2021 Ownership of intellectual property rights in this publication Unless otherwise noted, copyright (and any other intellectual property rights, if any) in this publication is owned by the Commonwealth of Australia. Creative Commons licence With the exception of the Coat of Arms, ATSB logo, and photos and graphics in which a third party holds copyright, this publication is licensed under a Creative Commons Attribution 3.0 Australia licence. Creative Commons Attribution 3.0 Australia Licence is a standard form licence agreement that allows you to copy, distribute, transmit and adapt this publication provided that you attribute the work. The ATSB’s preference is that you attribute this publication (and any material sourced from it) using the following wording: Source: Australian Transport Safety Bureau Copyright in material obtained from other agencies, private individuals or organisations, belongs to those agencies, individuals or organisations. Where you want to use their material you will need to contact them directly.
    [Show full text]
  • A High Fidelity Real-Time Simulation of a Small Turboshaft Engine
    NASA Technical Memorandum 100991 "l A High Fidelity Real-Time Simulation of a Small Turboshaft Engine Mark G. Ballin = NBB-2637B |NAS_-TM- 100991) A HIGH FIDELITY EEAL-TI_E SIMULATION OF A SMALL TDRBOSHAFT ENGINE CSCL _IE [NASA) 95 p Unclas G3/08 0156166 July 1988 | | = National Aeronautics and Space Administration NASATechnicalMemorandum100991 A High Fidelity Real-Time Simulation of a Small Turboshaft Engine Mark G. Ballin, Ames Research Center, Moffett Field, California July 1988 I_JASA National Aeronautics and Space Administration Ames Research Center MoffettField,California 94035 National Aeronautics and Space Administration N/ A Ames Research Center Moffett Field, California 94035 Shelley J. Scarlch Reply to At'In of: M/S 241-13 ERRATA RE: NASA TM 100991 A High-Fidellty Real-Time Simulation of a Small Turboshaft Engine Mark G. Ballin July 1988 On p. 2, figure i, a correction should be noted. In the upper middle portion of the figure, GAS INDUCED FLAP REGRESSIVE should be CONTROL-SYSTEM-INDUCED FLAP REGRESSIVE. Yours, Publications = DRAFT A HIGH FIDELITY REAL-TIME SIMULATION OF A SMALL TURBOSHAFT ENGINE Mark G. Ball.in Ames Research Center SUMMARY A high-fidellty component-type model and real-time digital simulation of the General Electric T700-GE-700 turboshaft engine were developed for use with current generation real-time blade-dement rotor helicopter simulations. A control system model based on the specification fuel control system used in the UH-60A Black Hawk helicopter is also pre- sented. The modeling assumptions and real-time digital implementation methods particular to the simulation of small turboshaft engines are described.
    [Show full text]