CONTENTS

NEW PRODUCTS

DM20M 20CH DIGITAL MIXER 02 KK Series Entertainment project Audio System 70 DM8/DM12/DM16 Ultra-Compact Digital Mixer 04 KJ Series Active&Passive Entertainment Audio 74 DB16 Remote-Controlled Digital Mixer 05 System 79 DB20P-600/DB20P-1000/DB20P 20CH Rack-mounted Digital Mixer 06 L Series Engineering Speaker 82 MK Series Economical Professional Mixers 08 H Series Stage Speaker 85 P Series PoE-based active speaker 10 FPH Series Plastic Speaker 92 DM1616 AoIP technology Based Digital Intelligence Audio Matrix 12 FPD Series Plastic Speaker 95 KB Series Plastic Speaker 99 PROFESSIONAL SPEAKER FT Series Coaxial Speaker 101 DLS System Column speaker cabinet system with built-in 14 MK Series Studio Monitor Speaker 102 20CH digital mixer PAP Series Portable Combo Speaker System with Built-in 8-channel Digital Mixer 108 LS System Column speaker cabinet system 16 PSM Series Stereo Monitor Speaker System LA Series Full-range speaker 18 TS Series Coaxial Loudspeaker 23 MIXING CONSOLE FHE Series Stage Monitor Speakers (Active & Passive) 30 KG Series Recording Mixing Consoles 111 KT Series Active Coaxial Loudspeaker 32 MIX-C Series Mixing Console 114 KV Series Compact Portable Pro Speaker Cabinet 38 MIX-CA Series Powered Mixers 115 PL Series 4 way long projection audio system 44 MIX Series Mixing Console 116 FW Series For Mobile Outdoor Performance 48 AE Series Microphone & Power Amplifier Combined 117 FHE Series Pro Active & Passive Speakers 51 K Series Engineering Speaker 57 KA Series Entertainment Audio System 62

2 185,000 M² Audio Science and Technology Park

PROFESSIONAL AMPLIFIER& DIGITAL WIRELESS PERIPHERAL EQUIPMENT CONFERENCE SYSTEM

DG Series Digital Amplifier with DSP 119 PWB69 Digital Wireless Conference System 141 AQ Series Digital Power Amplifier 120 WDM69 Digital Wireless Conference System 142 AG Series Digital Power Amplifier 122 PLL UHF Wireless receiver Two Channel Wireless 143 Micophone System AK Series Network intelligent power amplifier(DSP) 124 Single Channel Wireless Microphone 144 EP Series Voltage Regulator 126 AL Series Professional Power Amplifier 127 AD Series Professional Power Amplifier 128 AE Series Professional Power Amplifier 129 AP Series Audio Processor 130 DP Series Audio Processor 133 SEQ Series Loudspeaker Controller 137 SPS Series Power Sequencer 138 AZ Series Power Sequencer 140

1 DM20M THE FIRST SOUNDKING COMPACT DIGITAL MIXER Patent No: 2016830322501

R&D IN UK & GERMANY

DM20M Support operations and control by iPad or Android tablet(after APP downloaded) InnovationInnovatio Points: > S/PDIF in/out & AES/EBU output > 7" 1024x600 IPS touch screen > Input: 12 MIC(4 COMBO), 2 ST,S/PDIF input,USB input > Touch screen sliding operation > 8 FX (2 Modulation,2 Delay,2 Reverb,2 GEQ) All-metal enclosure > BUS: L/R +4MONO+4ST+1Monitor/High quality Introduction: components:NEUTRIK XLR > 2 USB(recording/playback) SK DM20M mixer – 20 channels,motorised faders, large > iPad remote control touch screen, USB ports – everything you need for perfect live > Electro-gain of 12 MIC mixing. DM20M is the result of many years of R&D combining > 2.1 output Soundking’s experience in signal processing with the latest > Support acoustic environment improvement at RTA measuring technologies to give you total control over your sound. mode. Although ultra compact, DM20M uses the full potential of our > Change 15-band GEQ to 31-band. digital mixer expertise without compromising any features. All > Support ogg, flac, ape, WAV and MP3. settings can be recalled including, most importantly, the faders – > Bus layer send function allows directly sending the required unique in this class of mixer. Full control is also available remotely input channel to current bus at bus interface. via Wi-Fi so you are free to mix anywhere in the venue. There are 12 mic/line inputs, 2 stereo inputs all routable via Application: 16 buses to 8 balanced outputs. Joining them is a host of 1) Bar, KTV, party, etc; professional digital interfaces – AES/EBU, SPDIF and two USB. 2) enterprise, school, etc; The 1024x600 touch screen makes navigation simple and 3) band or music show, etc; intuitive, in fact DM20M can be used straight out of the box 4) private home party; without the need to read a 100 page manual! 5) studio or live show on the net; Studio quality sound, multi-effects engines and full dynamics processing make DM20M easy way to mix your sound. 2. Built-in Media Player & Recorder 1. Dynamics sub-page 2 USB(recording/playback) The dynamics sub-page allows to change the parameter for > Built in media player and recorder the Gate and compressor. > Playing MP3 or WAV format. The default recording format is WAV. > New APE and FLAC file format playing

P2 Package

1 Mic In 8 Adjust Pot 2 Mic/Line In 9 System Control 3 Screen 10 Head Phone Port/Pot 4 Channel Strip Section 11 USB 5 Master Fader 12 S/PDIF In/Out 6 Layer 13 AES/EBU Out Put 7 Master Level Meter 14 Stereo Input

3.3 High Hi h Quality Q li Configuration C fi i 6. iPad Control

The 4th generation 40bit SHARC floating > Control DM20 via iPad APP, including gain / EQ / point processor, 24bit/192kHz dynamic / fader, etc. AD/DA converting, built-in > Perfectly control DM20 via WiFi using built-in AP reverb/delay/compressor/EQ/GEQ. or external router.

15-band GEQ upgraded to 31-band

4. Modulation Subpage 7. 4 band EQ

Double press “Modulation1 or 2” button in Frequency ranges from 20Hz up to 20kHz. the FX Subpage, access to Modulation parameter tuning Subpage as below showed in the picture.

5. Easy Operation Perfect Tone 8. Mono Bus

2.1 output Bus 1 ~Bus 4 are Mono busses. > One key crossover; set up 2.1 system quickly > Save the time of mixing and installation > Easy operation even for anyone who has no tuning experience

> New RTA function

P3 DM Series Ultra-Compact Digital Mixer Patent No: 2016830322501

Support operations and control by the browser of iPad, Android tablet, PC, etc

FEATURES PC/iPad/smartphone remote control Multiple control via wireless network and Ethernet, compatible witb iOS, Android, Windows, Mac OS and Linux device Input channel supports phantom power, 4 band PEQ, high pass filter, compressor, effect and noise gate Output channel supports reverb, delay and 8 built-in effects 2 x USB(stereo recording/playback/system updates/scene storage) 24bit/192kHz ADC/DAC 60dB MIC pre-amp 4AUX, 1 Stereo output 4 assignable output 4 built-in effects Support scene memory 1.MIC IN 7.Main L/R Out 2.MIC Volume 8.Headphone monitoring 3.STEREO IN 9.Channel Selection and LED 4.USB2.0 10.Function Selection and LED 5.AUX OUT 11.USB Play and Pause 6.Effect Foot Switch 12.Universal Knob

DM8 DM12 DM16 CHANNELDESCRIPTION CHANNELDESCRIPTION CHANNEL DESCRIPTION MIC IN 6 2 x Combo XLR 8 4 x Combo XLR 12 6 x Combo XLR LINE IN 1 pair STEREO 2 x JACK 2 pair STEREO 4 x JACK 2 pairs STEREO 4 x JACK MAIN OUTPUT L/R "2 x XLR L/R "2 x XLR L/R "2 X XLR AUX 2 2 x AUX OUT" 4 4 x AUX OUT" 4 4 X AUX OUT" FOOTSWITCH 2 2 x JACK 2 2 x JACK 2 2 x JACK MONIITOR 1 1 x 1 1 x HEADPHONE 1 1 x HEADPHONE USB HEADPHONE 2 x USB to connect USB stick for playback and record, support WAV and MP3 format Network External wireless USB module LAN interface 1 x interface for network connection AD/DA Maximum support 24Bit/192KHz Effect 4 effects - 2 Reverb and 2 Delay Power supply External 12V DC(AC 90-240V 50/60Hz)adapter

P4 DB Series Remote-Controlled Digital Mixer

Rear

1. MIC IN 2. MIC/LINE IN 3. STEREO IN 4. Output 5. PHONES

FEATURES PC/iPad/smartphone remote control Multiple control via wireless network and Ethernet, compatible witb iOS, Android, Windows, Mac OS and Linux device Input channel supports pre-amp electro-gain, phantom power, 4 band PEQ, high pass filter, compressor, effect and noise gate

Output channel supports reverb, delay and 8 built-in effects 24bit/192kHz ADC/DAC 2 x USB(stereo recording/playback/system updates/scene storage) 16 Busses: 4 Mono output, 5 Stereo output, 1 Stereo monitor 8 assignable XLR output 4 built-in effects Support scene memory

Support operations and control by the browser of iPad, Android tablet, PC, etc

DB16 CHANNEL DESCRIPTION MIC IN 12 12 Combo XLR LINE IN 2 Stereo 4 Jack Master Out L/R 6 assignableXLR AUX 12 output USB Interface USB recording/playback(wav) AD/DA Maximum 24Bit/192KHz Effect 4 effect modules: 2 reverb, 2 delay Network Wifi external module Power Supply External 24V DC(AC 90-240V 50/60Hz) power adapter

P5 DB20P-600/DB20P-1000/DB20P 20CH Rack-mounted Digital Mixer Patent No: 2016830322501

R&D offUK UK and dG Germany

1 2 3 4 56 DB20P

DB20P-600 (With Power Amplifier)

10 9 8 7 20 Channels Rack Mounting Digital Mixer 1 Display screen 6 Channel section 2 Main channel 7 L/R channel DB20P rack mounting digital mixer series, among which 3 USB 8 Adjusting knob DB20P-600/800 is rack mounting digital mixer with amplifier, 19” 4 Layer 9 System control standard rack mounting. 5 Power button 10 Headphones It combines the brand new concept of modern digital mixer and traditional cabinet type mixer. Compact design, simple operating interface, professional Reverb (20 input channels) it includes 12 mic input, 2 stereo input effect enables the professional an excellent performance, and can also and pro digital input interface; 16 busses include 8 user provide the inexperienced with powerful effect support. defined analog outputs, digital output port and a pair of The digital cabinet type mixer DB20P integrates the function of limiter, monitor interface. effect, divider, equaliser and regular analog mixer, saving you a lot of It provides you with many configuration options. Besides, costs. DB20P is designed with 2 USB ports for playback, recording, DB20P combines the advantages of high-tech hardware/touch-slide scene memory and iPad remote control. control and iPad remote control. DB20P is equipped with 7” HD touch screen, WiFi control Equipped with the 4th generation 40bit SHARC floating point available, 10 parametric encoders, convenient and visual processor, 24bit/192kHz ADC/DAC, internal 8 effects, including operation. yReverb, Delay, Modulation and GEQ.

High Quality Configuration The 4th generation 40bit SHARC floating point processor, iPiPadad ccontrolon l 24bit/48kHz AD/DA converting, built-in reverb/delay/ compressor/EQ/GEQ. > OOptionalptional iPiPada remote control interfacece > iPad APP rrealizese gain, EQ, dynamic,ic, fader and othother operations of DB20P > Hotpot mmode or router mode foror specific tratransmissionn distance, easysy aandnd peperfectrfect ccontrol of DB20P

P6 3 2 1

DB20P-600 rear panel (With Power Amplifier)

4 5 6 7 8

3 2 1

DB20P rear panel

5 6 7 8

1 Mic, Line input 5 Output 2 Mic input 6 Balance digital output 3 Stereo input 7 Digital signal input/output 4 Internal Amp output 8 Power input

Model DB20P DB20P-600 DB20P-1000 Line input 12 MIC(4 COMBO), 2 Stereo, S/PDIF input, USB input Input channel function Phase, Delay, high pass filter, 4-band parametric EQ, noise gate, Compressor, L/R Pan, Effects Line output 8 assignable XLR + AES/EBU, S/PDIF and stereo headphone Internal signal generator white noise/ sine wave/ pink noise Phantom power 48V, each channel switchable alone USB function USB playback/recording(WAV), system upgrade, scene storage, external USB network card Screen 7” 1024x600 IPS high definition touch screen AD/DA max support 192KHz/24-bit Sample frequency 48kHz DSP 4th generation ADI 40-bit float point SHARC processor, 450M Effects up to 8 effect modules(2 Reverb, 2 Modulation, 2 Delay and 2 31-band GEQ) System custom Android system Network yes via external USB module iPad control yes Internal AMP output no 4*150W 4Ω 2*500W 4Ω Power supply 100-240V 50/60Hz 100-120V 50/60Hz, 200-240V 50/60Hz Dimension 127*483*177mm 193*483*177mm Weight 4.3kg 6kg 6.5kg

P7 MK Series Economical Professional Mixers

MK24

Economical Professional Mixers MK16/MK20/MK24 series economical professional mixers are designed based on the starting point of mass customers. Before designing this series of mixers, we have conducted a survey on the function, pricing and quality of the competitors’(YAMAHA, BEHRINGER, Soundcraft, ALLEN&HEATH) products, so as to ensure this series of mixers are powerful, cost-effective and reliable. They feature 10CH/14CH/18CH mic inputs, 100 kinds of DSP effects, USB recording and playback, 4-bandof EQ, 2 frequency sweep, 4 groups/6 auxiliary output, etc.

Detail functions and features are as follow: 1) Built-in switching power supply, AC 100V-240V. 2) Low noise, large dynamic pre-amp. 3) Condenser mic with 48V phantom power. 4) Built-in digital effects imitating 100 kinds of acoustic fields, very intuitive digital display screen, convenient encoder control for required effects and states. 5) Built-in USB recording, USB recording/playback with adjustable signal level. 6) Built-in 2 x 9-band graphic EQ. 7) 6 auxiliary outputs, 4 group outputs, 2 auxiliary returns. 8) High precision 12-band level indicator circuit. 9) Japan imported high-end NOBLE potentiometer. 10) Built-in MP3, USB , SD card, Bluetooth playback function.

P8 MK24 REAR

MK16 MK20 MK24 Mono mic 10 14 18 Stereo mic 4 4 4 Stereo return 2 2 2 Main output 2 2 2 Group output 4 4 4 Auxiliary output 6 6 6 USB recording YES YES YES DSP effects 100 100 100 MP3/USB/Bluetooth YES YES YES

P9 P Series PoE-based active speaker

(1)P14CA(POE)/P14C(PASSIVE (2)P14WA(POE)/P14WPASSIVE

  

Optional black or white color

Features 1). PoE-based active speaker P14WA(wall mounted)/P14CA(ceiling) is an audio power module with 60w/4Ω output, which adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal transmission and control; 2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet engineering specifications; 3). Digital and networked audio transmission realizes, high expendable system; 4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device connection, software routing and signal distribution; 5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration; 6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller, parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit protection, natural heat dissipation; 7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker. The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read and called from each other; 8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage AD cabling, better satisfying the safety and fire prevention regulations; 9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

P10 Installation

(1)ceiling (2)wall mounted

     





PoE-based active speaker 3DVVLYHEDVVUHÀH[ Model: P14WA(wall mounted)/P14CA(ceiling) Model: P14W (wall mounted)/P14C (ceiling) Power: 60W Rated power: 30W(continuous), 120W (peak) Directivity: 70 ° x 70 ° Maximum SPL: 105dB(continuous), 110dB (peak) Frequency response: 130Hz-18kHz Frequency response(-10db): 130Hz-10kHz Connector: single RJ-45 Sensitivity(1m/1w): 90dB Audio transmission type: Dante Rated impedance: 8Ω Rate: 100 Mbps Directivity: 70 ° x 70 ° Routing control: Dante Controller Input connector: 6.35mm jack Control parameters: volume, mute, limit, EQ, noise gate(optional) LF unit: 4”/25.5mm voice coil/30W/8Ω/NdFeB Digital THD: 0.001 Dimensions(DxWxH): 290*200*81(mm) S/N ratio: >100dB(A-weighted) Function: over-current, high temperature, overload/short circuit protection Cooling: natural heat dissipation Power input: PoE+, compatible with 802.3af and 802.3at

P11 DM1616 AoIP technology Based Digital Intelligence Audio Matrix

DM1616 is a digital intelligence audio processing equipment based on AoIP technology that can coordinate digital speaker, digital microphone, virtual sound source and traditional analog/digital audio equipment in fulfilling various core processing tasks for small and medium scale audio systems. It meets the demanding requirements of high quality sound system for meeting, intelligent building, performance, school, government agency and so on. DM1616 has a series of monitoring tools(to monitor important system parameters, hardware’s running status and signal level), control components and the most advanced configuration software system. Service life is improved and faults like shutdown are reduced due to simplified operating process. The most popular feature of DM1616 is the very low signal processing costs. Stability and reliability: DM1616 offers a set of complete scheme to solve dynamic design system. Compared with those systems used by industry designer, engineer, maintainer, operator and terminal user, DM1616 has unparalleled stability and reliability. DM1616 has the advantages of easy management, controllable hardware costs, enormous basic framework, perfect user interface and forward-looking application consideration. The audio system built by DM1616 features easy management, controllable hardware costs, enormous basic framework and economic system upgrade and reconstruction according to user demand. More importantly, DM1616 is designed with comprehensive control interfaces to be called by user at any time. After system construction is finished, although user demand is changed, DM1616 can still modify and create new user interface because of the advantage of comprehensive control interfaces. Undoubtedly, DM1616 has the most advanced password protection to authorize different levels of administrators so as to avoid any accident. Meeting places are all depending on DM1616. When it comes to demanding audio requirement or high efficiency design requirement, DM1616 remains the first choice.

1. AES67-2015 and AES70-2015 standard are used as basic framework of AoIP (Audio over IP) to realize digital audio distribution and transmission; it supports Dante device expansion in accordance with user requirements to realize real intercommunication and mutual control between systems and equipments (currently world’s first). 2. Built in with ADI fifth generation SHARC + dual core processor supports 32, 40 and 64bit floating point calculation and high performance FFT/IIR/FIR hardware acceleration function, and calculating capacity reaches up to 5.4 GFlops. 3. The new generation integrated management platform MAXNet provides free configuration among various audio processing modules, supports online and remote management, and offer real time system monitoring and control via PC, smartphone or tablet; AoIP routing and handover(Dante included) can all be completed within the same interface without third party software like Dante Controller. 4. Voltage, current, temperature and level meter monitor. 5. Local alarm information storage: Set the voltage, current, temperature and the upper and lower limits of level meter and save the information into local database so that user can have easy review of running state. 6. Control the active speaker designed with Dante network interface, adjust its parameters via network, check its running state and send the monitored sound to Dante network by place a microphone within speaker. 7. Virtual connection and online control can only be established between output and input or between same type ports.

P12 MAIN PERFORMANCE 1. This unit offers 16CH analog input and 16CH analog output, 25pin D-shape interface 2. 24bit/48KHz sound quality, 110dB dynamic range 3. 6CH analog inputs all include high quality microphone amplifier(THAT chipset) and independent phantom power switch 4. Analog output adopts electronic transformer chip, auto matching for balance or unbalance connection mode 5. 4 x100M/1000M Ethernet interface, support AoIP cascade and master-slave mode 6. AoIP access maximum supports64in+64out AES67 and 64in+64out Dante 7. Standard module includes EQ, dynamics, delay, mix, crossover, signal generation, etc 8. Expansion module includes echo cancellation, howling suppression, auto mix, auto gain control, etc 9. Internal 4GPI+4GPO control interface can trigger linkage with other external equipment 10. Word Clock input&output, USB2.0 backup interface 11. Exercise independent control on each channel of DSP via Dante. 12. Delay module: support maximum 1s delay and function switching according to demand. 13. Route module: support maximum 16x16 routing. 14. Mix module: support maximum 16x16 mix, input&output gain adjustment and mute switching. 15. EQ module: support maximum 16-band PEQ and 31-band GEQ. 16. Filter module: include low pass, high pass, low cut and high cut filter. High pass and low pass filter provides two options-LR and ButterWorth. 17. Crossover module: support maximum four-way and input&output gain back adjusting. Each frequency point can be adjusted alone and also two options are provided-LR and ButterWorth. 18. Signal generator module: Currently provide two options-white noise and pure tone.

P13 DLS System Column speaker cabinet system with built-in 20CH digital mixer LLA308A308

iPadi control LALA308308 WirelessW remote controltrol mmode, the user uses ipadpad ccanan easily link DLDLSS seseriesries prproductroodducuct

LA1LA12SA2SA

LA12S

Introduction Application Soundking is the first company to design rack mounting digital mixer Touring show,Small conference,conference room. into PA product---- DLS portable column. The mixer features the 4th Function Room, Band practice room. generation SHARC floating point processor, 24 bit/48 kHz AD/DA convertor, built-in programs ( DSP, reverb, delay, modulation and EQ and GEQ, 12 professional mic inputs and 4 line inputs, professional S/ Innovations: PDIF digital signal in/out connectors, 16 BUS including 8 user-defined World’s first PA system with internal digital mixer, analogue output connector and AES/EBU output connectors, USB for simplified system, easy installation and debugging. playing / recording / scene saving and wireless connection. User can Make the job of professionals much easier, iPad or control the operation via iPad/tablet PC, and audit the sound at every Android tablet remote control based on actual field corner, and then adjust the mixing according the actual requirement. conditions.

LA12SA Active Sub-bass Speaker System is built in with 3CH digital amplifier, which means one Active Sub-bass Speaker can drive two LA308 Full-Range Speakers and one LA12S Passive Sub-bass Speaker.

P14 Application system

LA308 LA308 LA308A308 LA3LA30808 Digital mixer Digital mixer

LA12S DLA12S LA12SA(active) DLA12S LA12SA LA12SA(active)

DLS122DLS122 DLS8282

SYSTEM CONFIGURATION MODEL QUANTITY UNIT SYSTEM CONFIGURATION MODEL QUANTITY UNIT Full range speaker LA308 4 piece Full range speaker LA308 2 piece Subwoofer with mixer DLA12S 1 piece Subwoofer with mixer DLA12S 1 piece Active subwoofer LA12SA 2 piece Active subwoofer LA12SA 1 piece Passive subwoofer LA12S 1 piece Flight case(optional) JHDLS32 1 piece Flight case(optional) JHLS82 2 piece Mixer stand DF150-3 1 piece Mixer stand DF150-3 1 piece Speaker stand DB073 2 piece Speaker wire 1 set Speaker wire 1 set Signal wire 1 set Signal wire 1 set Suitable for 500~800 sqm venue Suitable for 250~350 sqm venue

LA208 LA208 LA306 LA306

Digital mixer Digital mixer

SB314 SB314 SB314 SB314

LA12S active DLA12S DLA12S LA12S active

DLS22 DLS32DLS332

SYSTEM CONFIGURATION MODEL QUANTITY UNIT SYSTEM CONFIGURATION MODEL QUANTITY UNIT Full range speaker LA208 2 piece Full range speaker LA306 2 piece Subwoofer with mixer DLA12S 1 piece Subwoofer with mixer DLA12S 1 piece Active subwoofer LA12SA 1 piece Active subwoofer LA12SA 1 piece Flight case(optional) JHDLS32 1 piece Flight case(optional) JHDLS32 1 piece Mixer stand DF150-3 1 piece Mixer stand DF150-3 1 piece Speaker stand DB073-1 2 piece Speaker stand DB073-1 2 piece Speaker wire 1 set Speaker wire 1 set Signal wire 1 set Signal wire 1 set Suitable for 100~150 sqm venue Suitable for200~250 sqm venue

P15 LS System Column speaker cabinet system

LS series active column speaker system features easy system combination for different field requirements; excellent tone, compact design, easy carry; alternative three types full range line array column speakers LA208/LA308/LA306, wide frequency response, clear tone, wide horizontal coverage, long projection, etc. Active subwoofer LA12SA with built-in powerful 32bit DSP module; gain, crossover, EQ, delay, limit and memory function, three-way independent Class D amplifier, high efficiency, high power, low distortion, rated power: 1x900W+2x350W, excellent tone; switching mode power supply, light weight, stable performance; three-way independent amplifier can drive one active driver, two full range speakers and one passive subwoofer. The whole set of system packed in flight case, waterproof bag enclosed for all-weather use; only 5 minutes needed to install the whole set of system for different actual conditions. Features: > Full range speakers, imported unit, high sensitivity, light weight; > High strength, light weight and elegant contour of cabinet; > Clear tone, long projection; > Three-way independent amplifier can drive one active driver, two full range speakers and one passive subwoofer; > Easy system combination, fast installation.

LS21 LS22 NAME MODEL Qty UNIT NAME MODEL Qty UNIT Full range speaker LA208 2 piece Full range speaker LA208 2 piece Active subwoofer LA12SA 1 piece Active subwoofer LA12SA 1 piece Speaker stand SB305 2 piece Passive subwoofer LA12S 1 piece Speaker wire 1 set Flight case(optional) 1 piece Speaker stand DB073-1 2 piece Suitable for 100~150 sqm venue Suitable for 100~150 qm venue

LS122 LS31 LS32 NAME MODEL Qty UNIT NAME MODEL Qty UNIT NAME MODEL Qty UNIT Full range speaker LA308 4 piece Full range speaker LA306 2 piece Full range speaker LA306 2 piece Active subwoofer LA12SA 2 piece Active subwoofer LA12SA 1 piece Active subwoofer LA12SA 1 piece Passive subwoofer LA12S 2 piece Speaker stand SB305 2 piece Passive subwoofer LA12S 1 piece Flight case(optional) 2 piece Flight case(optional) 1 piece Suitable for 200~250 sqm venue Speaker stand DB073-1 2 piece Suitable for 500~800 sqm venue Suitable for 200~250 sqm venue

P16 column speaker cabinet system with built-in 20ch digital mixerxer

LA408 LA408

Feature Active Subwoofer This active subwoofer is configured with a built- in powerful 32bit DSP processor that integrates functions of Gain, Crossover, EQ, Delay, Limit, Program Memory, etc; 6 DSP modes can be flexibly selected for different applications including Music, Vocal, Live Show, Disco, Karaoke and Conference; 3-channel independent and highly- DLA12S-1 LA12SA-1 efficient “Class-D” power amplifier features high power, low distortion, light weight and stable performance.

System Introduction

According to market demand, our company integrates its own strong technology strength to release the brand new 4” series sound column system with metal material enclosure. It consists of 4 models, namely passive LA404/LA408 and active LA404A/LA408A. This speaker series feature high sensitivity, high power and very penetrating speech intelligibility, a best choice for vocal sound reinforcement. In order to expand the sound range and meet the bandwidth requirement from different kinds of music instruments, we also provide a special 12” subwoofer to enhance ULF band . This series is designed with 35mm hole on bottom for pole mounting purpose, and supports either combo use with subwoofer or the rack mounting use for different amplifying applications, simple and convenient. Application: very suitable for large/medium/small size meeting room, church, station, shopping mall, etc; Working together with subwoofer, it is suitable for outdoor performance, band, bar, culture saloon, etc;

DLS48 DLS44 LS48 LS44

LS48system Guantity LS44system Guantity LS48system Guantity LS48system Guantity LA408 2 LA404 2 LA408 2 LA404 2 DLA12S-1 1 DLA12S-1 1 LA12S-1 1 LA12S-1 1 LA12SA-1 1 LA12SA-1 1 LA12SA-1 1 LA12SA-1 1 DB023 2 DB023 2 DB023 2 DB023 2

P17 LA Series Full-range speaker Color options: LA208

LA308

LA306

Features of LA208: Features of LA306: > 8x2” full range speakers, Denmark imported Vifa unit, NdFeB magnet, high sensitivity, light > 8x3” full range speakers, NdFeB weight; magnet, high sensitivity, light weight; > AL cabinet, high strength, light weight, elegant contour; > AL cabinet, high strength, light > Wide frequency response, clear tone, wide horizontal coverage, long projection, etc; weight, elegant contour; > 6.35mm JACK and PHOENIX connector for quick and reliable connection; > Wide frequency response, clear > Professional U type stand LWM-1 optional for wall installation, H and V angle adjustable; tone, wide horizontal coverage, long >φ 35mm socket for pole mounting (SB305/DB073-1 stand pole). projection, etc; > Professional SPEAKON and Features of LA306: PHOENIX connector for quick and > 6x3” full range speakers, Denmark imported Faital unit, high sensitivity, excellent MF response; reliable connection; > Wide frequency response, clear tone, wide horizontal coverage, long projection, etc; > Professional stand for fast wall > Professional SPEAKON and PHOENIX connector for quick and reliable connection; installation; > Professional U type stand LWM-1 optional for wall installation, H and V angle adjustable; φ35mm socket for pole mounting > φ35mm socket for pole mounting (SB305/DB073-1 stand pole). (SB305/DB073 stand pole).

LA series full range column speakers can meet the requirements of combination system or single purpose for meeting room, use with woofer recommended.

Model LA208 LA306 LA308 Transducer 8x2"( 50 mm) neodymium driver 6x3"( 75mm) ferrite driver 8x3"( 75mm) ferrite driver Frequency Response 160Hz-18kHz 130Hz-20kHz 150Hz-17kHz Rated Power 120W 120W 240W Sensitivity 92dB 95dB 97dB Maximum SPL 118dB 123dB 127dB Nominal Impedance 8Ω 12Ω 16Ω Dispersion Angle 100°X 15° 100°X20° 125°X15° Connection 1x PHOENIX,2x 6.3 JACK connector 2x PHOENIX,2x SPEAKON connector 1x PHOENIX,2x SPEAKON connector Optional Accessories SB305/DB073-1 SB305/DB073-1 DB009-1/DB073 Dimensions(WxHxD) 70x610x90mm 124X550X152mm 103X807X130mm Net Weight(kg) 2.9kg 6.5kg 5.8kg

P18 DLA Series Subwoofer with built-in 20CH digital mixer DLA12S Active subwoofer

DLA12SADLADDLLALA12S1212S2SA

376 > 12”woofer, high power, prominent LF effect; > Internal 32bit DSP module with gain, crossover, EQ, delay, limit and memory function. Default or user defined setting available; > Switching mode power supply, light weight, reliable performance; > 3CH

453 Class D power amplifier, high power, low distortion, perfect sound; > Standard φ35mm socket for pole mounting; > Cooling fan and radiator; > One LA12SA can drive two LA208/LA306/LA308 and one passive subwoofer.

DLA12S subwoofer with internal digital mixer LA12SA/LA12S/DLA12S Equipped with 4th generation 40bit SHARC floating point processor, 24bit/48kHz ADC/ DAC, built-in effects including reverb, delay, limit and EQ; 16CH input including 12 mic and 4 line; Professional digital signal in/out connector, 16CH bus control including 8 assignable analog out and digital out connectors.

LA12SA front panel DLA12S front panelpanel

Model LA12SA LA12S DLA12S

Transducer Active Sub Woofer With DSP Passive sub woofer Active Sub Woofer With Digital mixer Component 12"×1 12"×1 12"×1 Nominal Impedance 8Ω 8Ω 8Ω RMS Power Handling 400W 400W 400W Peak Power Handling 800W 800W 800W Frequency Response 45Hz-180Hz 45Hz-180Hz 45Hz-180Hz Sensitivity(1W/1M) 95dB 95dB 95dB Max. SPL 124dB 124dB 124dB AMP 900W+2×350W/8Ω / / 2 In 4 Out DSP Module / / Enclosure birth plywood birth plywood polywood Dimension (WxHxD) 376×453×479mm 376×453×479mm 376×453×479mm Net weigh(kg) 24.5kg 18kg 24.3kg

P19 LA Series Full-range speaker

LA408/LA408AD Color options:

137.5 165

LA404/LA404AD

137.5 165 934.5 526.5

Mounting: support either pole mounting for mobile amplifying or rack mounting for meeting amplifying.

Model LA404LA408 Model LA404AD LA408AD

Type 4×4"passive full 8×4"passive full Type 4×4"active full 8×4"active full range column system range column system range column system range column system Frequency Response(-10dB) 100Hz--20kHz 100Hz--20kHz Frequency Response(-10dB) 100Hz--20kHz 100Hz--20kHz Sensitivity(1m@1w) 92dB 94dB Sensitivity LINE 0 dBu 0 dBu Max SPL 119dB 124dB Max SPL(dB) 115dB 120dB Nominal Impedance 8Ω 4Ω RMS power 200W 400W Rated Power 120W(continue), 240W(continue), LF Unit 4" full range /19mm 4" full range /19mm 480(peak) 960(peak) voice coil /30W voice coil /30W LF Unit 4*4" full range /19mm 8*4" full range /19mm Coverage(V*H) 80°x20° 80°x20° voice coil /30W voice coil /30W Connection JACK/XLR, built-in DSP JACK/XLR, built-in DSP Coverage(HxV) 80°x20° 80°x20° Voltage 100V-240V(wide) 100V-240V(wide) Connection 2×SPEAKON 2×SPEAKON Mounting ij35+rack ij35+rack Mounting ij35+rack ij35+rack Dimensions(WxHxD) 137.5×526.5×165 (mm) 137.5×934.5×165 (mm) Dimensions(WxHxD) 137.5×526.5×165 (mm) 137.5×934.5×165 (mm) Weight 7.5 kg 12 kg Weight 6.4 kg 10.8 kg

P20 LA Series Sound Column System

DLA12S-1/LA12SA-1 SUBWOOFER Feature For better amplifying effect, this series products adopt new mould metal material and use hierarchical wavelike mesh so as to deliver an astonishing appearance; professional rack mounting is angle-adjustable according to actual conditions. Featuring high sensitivity, high power and very penetrating speech intelligibility, this speaker series is a best choice for vocal sound reinforcement.

12" Subwoofer

LA12SA-1 rear panel DLA12S-1 rear panel

Model LA12SA-1 DLA12S-1

Type 12active subwoofer 12" passive subwoofer Frequency Response(-10dB) 45Hz--180Hz 45Hz--180Hz Sensitivity LINE 0 dBu 95dB Max SPL(dB) 124dB 124dB RMS power 900W(LF)+2*350W(MHF) 8Ω LF Unit 12" LF /75mm voice coil /350W 350W(continue), 1400(peak) Coverage(V*H) / 12" subwoofer/75mm voice coil/350W Connection 2*XLR+USB,AUX \ Voltage 220V~230V 2×SPEAKON Mounting ħ35+rack ħ35 DimensionsWxHxD 376×453×479 (mm) 376×453×479 (mm) Weight 24.5 kg 23 kg

P21 20 Channels Rack Mounting Digitalixer

1 2 3 4 5 6

1 Display screen 6 Channel section 2 Main channel 7 L/R channel 3 USB 8 Adjusting knob 4 Layer 9 System control 5 Power button 10 Headphones

Features: 10 9 8 7

> It combines the brand new concept of modern digital mixer and traditional cabinet type mixer. 3 2 > Compact design, simple operating interface, professional Reverb effect 1 enables the professional an excellent performance, and can also provide the inexperienced with powerful effect support. > This digital cabinet type mixer integrates the function of limiter, effect, divider, equaliser and regular analog mixer, saving you a lot of costs. > It combines the advantages of high-tech hardware/touch-slide control and iPad remote control. > Equipped with the 4th generation 40bit SHARC floating point processor, 24bit/192kHz ADC/DAC, internal 8 effects, including Reverb, Delay, Modulation and GEQ. > (20 input channels) it includes 12 mic input, 2 stereo input and pro 456 digital input interface; 16 busses include 8 user defined analog outputs, digital output port and a pair of monitor interface. DLS series products have wireless > It provides you with many configuration options; designed with 2 USB transmitting mode for easy connection ports for playback, recording, scene memory and iPad remote control. > Equipped with 7” HD touch screen, WiFi control available, 10 1 Mic, Line input 4 Output parametric encoders, convenient and visual operation. 2 Mic input 5 Balance digital output 3 Stereo input 6 Digital signal input/output

Technical Specifications Line input 12 MIC(4 COMBO), 2 Stereo, S/PDIF input, USB input Input channel function phase, delay, high pass filter, 4-band parametric EQ, noise gate, compressor, L/R pan, effects Line output 8 assignable XLR + AES/EBU, S/PDIF and stereo headphone Internal signal generator white noise/ sine wave/ pink noise Phantom power 48V, each channel switchable alone USB function USB playback/recording(WAV), system upgrade, scene storage, external USB network card Screen 7” 1024x600 IPS high definition touch screen AD/DA max support 192kHz/24bit Sample frequency 48kHz DSP ADI 4th generation 40bit SHARC floating point processor, 450M Effects up to 8 effect modules(2 reverb, 2 modulation, 2 delay and 2 15-band GEQ) System custom Android operating system Network yes via external USB module iPad control yes Internal AMP output no Power supply 100-240V 50/60Hz

P22 TS Series Coaxial Loudspeaker Series

TS-SUB

TS-66

TS-33

TS-SF TS-UF TS-DF

Introduction: Vocal clearness is essential for the theater loudspeaker, but the average loudspeaker has high proportion of reverb decreasing the vocal clearness, and HF attenuation in far field affecting the tone, and inconstant directivity. Non-coaxial speaker cabinet has HF&LF interference, obvious comb filtering. Because of the reasons mentioned above, the market urgently needs a professional theater loudspeaker of excellent performance to suit the theater application. TS series is specially designed by US experts David W.Gunness and Stephen J.Siegel for large/medium theater reinforcement. The series consists of TS-33 and TS-66 for far field and middle field individually, dual 18”subwoofer TS-SUB, filling loudspeaker TS- UF. To improve the vocal clearness, the main loudspeaker uses horn cabinet design, coaxial LF & HF completely deleting the sound interference. The glass fiber constant directivity horn is equipped with 3” Nd compression driver to ensure the high resolution. The near field loudspeaker is designed with trapezoidal enclosure and 35 degree coverage. Except the subwoofer, each loudspeaker has 16 M10 flying points to ensure reliable suspension.

Application: TS series is suitable for the applications in large or medium sizeentertainment places , etc.

P23 TS-33 Far Projection Loudspeaker

Introduction: TS-33 consists of a B&C 15”cone woofer and a 3”Nd magnetic HF compression driver. TS-33 features horn cabinet design, coaxial LF & HF, HF horn coverage 35°(H)*35°(V), 18mm plywood with slot-tongue structure for robust tone. The cabinet has 16*M10 flying points for quick and reliable suspension.

Features: > Horn design with strong directivity, high sensitivity, high SPL, far projection > High performance speaker unit to extend frequency response, Nd magnetic HF > Compact structure, coaxial HF&LF to delete sound interference > Symmetrical trapezoidal enclosure for system installation > Constant directivity horn for even frequency response

TS-33

Model TS-33 Type 15” two way passive loudspeaker 660 Frequency response 130Hz~18kHz(±3dB) 100Hz~20kHz(-10dB) Input Sensitivity(1m/1W) - Sensitivity(1W@1m) 104dB(LF) ; 110dB(HF) Power handing LF: 700W (continuous); 2800W(peak) 610 HF: 110W(continuous); 440W(peak) 332 Nominal Impedance LF: 8Ω; HF: 16Ω Coverage(HxV) 35°x35° Crossover 950Hz Woofer 1X15”cone woofer/100mm voice coil HF driver 1X 75mm HF compression driver (1.4”throat) / 75 mm voice coil 830 Max SPL(@1m) 139dB(LF) ; 137dB(HF) Connector 2XSPEAKON Dimension(WxHxD) 610x660x830(mm) Net weight 54kg 610

P24 TS-66 Far/Middle Projection Loudspeaker

Introduction: TS-66 consists of a B&C 15”cone woofer and a 3”Nd magnetic HF compression driver. PTS-66 features horn cabinet design, coaxial LF & HF, HF horn coverage 60°(H)*60°(V). The loudspeaker has no crossover inside, but has to connect with external digital processor to optimize the performance. The glass fiber constant directivity HF horn delivers delicate tone. High quality 18mm plywood cabinet with slot-tongue structure offers robust tone. The loudspeaker has 16*M10 flying points for quick and reliable suspension.

Features: > Horn design with strong directivity, high sensitivity, high SPL, far projection > High performance speaker unit to extend frequency response, Nd magnetic HF > Compact structure, coaxial HF&LF to delete sound interference > Symmetrical trapezoidal enclosure for system installation > Constant directivity horn for even frequency response > NEUTRIK connector

TS-66

Model TS-66 Type 15” two way passive loudspeaker 660 Frequency response 130Hz~18kHz(±3dB) 100Hz~20kHz(-10dB) Input Sensitivity - Sensitivity(1W@1m) 103dB(LF); 109dB(HF) Power handling LF:700W (continuous), 2800W(peak) 610 HF:110W (continuous), 440W(peak) Impedance LF: 8Ω; HF: 16Ω 275 Coverage(HxV) 60°x60° Crossover 950Hz Woofer 1X15” cone woofer/100mm voice coil HF driver 1X 75mm HF compression driver (1.4”throat) / 75 mm voice coil

Max SPL(@1m) 138dB(LF); 135dB(HF) 670 Connector 2XSPEAKON Dimension(WxHxD) 610x660x670(mm) Net weight 50kg 610

P25 TS-SUB Subwoofer

Introduction: TS-SUB consists of two RCF 18” cone woofers. The vented cabinet and diagonal unit assembly effectively reduce the standing wave and make the loudspeaker compact. The loudspeaker has no crossover inside, but has to connect with external digital processor to optimize the performance. High quality 18mm plywood cabinet of slot-tongue structure offers robust tone. The loudspeaker has 16*M10 flying points for quick and reliable suspension.

Features: > Classic vented structure; LF extended to 33Hz; > High performance speaker units extends frequency response; NdFeB magnetic; > Diagonal unit assembly effectively reduces the standing wave and make the loudspeaker compact. > 18mm plywood with slot-tongue structure for robust tone; > NEUTRIK connector

TS-SUB

760 510 Model TS-SUB Type 18” passive subwoofer Frequency response 45Hz~250Hz(±3dB) 37Hz~280Hz(-10dB) Input Sensitivity - Sensitivity(1W@1m) 101dB Power handling 2400W (continuous), 9600W (peak) 910 Nominal Impedance 8Ω×2 Crossover 200Hz Woofer 2X18” cone woofer/100mm voice coil Max SPL(@1m) 141dB Connector 2XSPEAKON Dimension(WxHxD) 760x910x510(mm) Net weight 67kg

P26 TS-UF Filling Loudspeaker

Introduction: TS-UF consists of a B&C 8”cone woofer and a 1.73” Nd magnet HF compression driver. The HF coverage is 100°(H) X70°(V). The external digital processor optimizes the loudspeaker performance. Glass fiber constant directivity HF horn delivers delicate tone and splendid pan. 12mm plywood cabinet with slot- tongue structure offer robust tone. The cabinet is designed with 15*M6 flying points for quick and reliable suspension.

Features: > Compact design for ceiling installation > High performance speaker unit extends frequency response; NdFeB magnetic HF > Multi-angle cabinet for flexible installation > External digital processor optimizes the speaker performance > 15 M6 flying points for quick and reliable suspension > NEUTRIK connector

TS-UF 510 260 270

Model TS-UF Type 8”two way passive loudspeaker Frequency response 120Hz~18kHz (±3dB) 70Hz~20kHz (-10dB) Input Sensitivity - Sensitivity(1W@1m) 92dB Power handling LF: 200W (continuous); 800W (peak) HF: 50W (continuous); 200W (peak) Nominal Impedance LF: 8Ω; HF: 8Ω Coverage(HxV) 100°x70° Crossover 4000Hz Woofer 1X8” cone woofer/50mm voice coil HF driver 1X 44mm HF compression driver (1”throat) / 44 mm voice coil Max SPL(@1m) 121dB Connector 2XSPEAKON Dimension(WxHxD) 510x270x260(mm) Net weight 12kg

P27 TS-DF Near Projection Loudspeaker

Introduction: TS-DF consists of a B&C 12” coaxial full range speaker, 12”cone woofer and a 3”HF compression driver. HF horn coverage is 80°(H) X80°(V). The voice coils of HF and LF are reversed to effectively compensate the MF/HF impedance, and to reduce the distortion but improve efficiency. The trapezoidal design is suitable for near field projection. Aluminum HF horn delivers delicate tone and splendid pan. 18mm plywood cabinet with slot-tongue structure offers robust tone. The cabinet is designed with 12*M10 flying points for quick and reliable suspension.

Features: > Full range coaxial speaker design, HF & LF sharing NdFeB magnet; low distortion, high sensitivity; > High performance speaker unit extends frequency response. > Coaxial design deletes the interference of HF &LF and makes the loudspeaker compact. > External processor optimizes the speaker performance. > Trapezoidal enclosure suits the near field projection; coverage 35 degree;

TS-DF

Model TS-DF Type 12" two way passive loudspeaker Frequency response 180Hz~18kHz (±3dB) 150Hz~20kHz (-10dB) Sensitivity(1W@1m) 99dB Power handing LF: 350W (continuous); 1400W (peak) HF: 80W (continuous); 320W (peak) Nominal Impedance LF: 8Ω; HF: 8Ω Coverage(HxV) 80°x80° Crossover 1200Hz Woofer 1X12"cone woofer/67mm voice coil HF driver 1X 75mm HF compression driver / 75mm voice coil Max SPL(@1m) 130dB Connector 2XSPEAKON Dimension(WxHxD) 540x400x530(mm) Net weight 23kg

P28 TS-SF Filling Loudspeaker

Introduction: TS-UF consists of a 5”cone woofer and a 25mm HF compression driver. delicate tone and splendid pan. 12mm plywood cabinet with slot-tongue structure offer robust tone.

Features: > Compact design > High performance speaker unit extends frequency response; NdFeB magnetic HF > Multi-angle cabinet for flexible installation > Coaxial design deletes the interference of HF &LF and makes the loudspeaker compact.

TS-SF

Model TS-SF Type 5”two way passive loudspeaker Frequency response 90Hz~20kHz(±3dB) 70Hz~20kHz(-10dB) Sensitivity(1W@1m) 87dB Power handling 80W Nominal Impedance 8Ω Coverage(HxV) 90°x90° Crossover 4000Hz Woofer 1X5”cone woofer/38mm voice coil HF driver 1X 25mm HF compression driver (1”throat)/13mm voice coil Max SPL(@1m) 112dB Connector 2XSPEAKON Dimension(WxHxD) 250x210x190mm Net weight 4kg

P29 FHE Series Stage Monitor Speakers Active & Passive

FHE12MA (Active) FHE12M(Passive) FHE15MA (Active)(Active) FHE15M(PFHE15M(Passive)assive)

Model FHE12MA FHE15MA Type 12" Active Stage Monitor 15" Active Stage Monitor Frequency response 55Hz--20kHz(-10dB) 50Hz--20kHz(-10dB) LF 12"LF/75mm voice coil 15"LF/75mm voice coil HF 44mm voice coil 44mm voice coil

Input Sensitivity 0dBu 0dBu OPTIONAL(5M 10M 15M 20M) Max.SPL 129dB 131dB Amp power rated 300W (LF)+80W (HF) 400W (LF)+80W (HF) Coverage(HxV) 90°x40° 90°x40° Crossover 2.0KHz 2.0KHz Input connectors JACK/XLR JACK/XLR Power supply 230V/115V 230V/115V Suspension system 8 M10 flying points 8 M10 flying points Dimensions (WxHxD) 604x360x335 (mm) 696x415x386 (mm) Net weight 29Kg 33Kg BF103E

Model FHE12M FHE15M Type 12" 2 way Passive Stage Monitor 15" 2 way Passive Stage Monitor Frequency response 55Hz--20kHz (-10dB); 50Hz--20kHz (-10dB) Sensitivity (1W@1m) 97dB 98dB Nominal Impedance 8Ω 8Ω Power handling 300W (continuous); 1200 (peak) 400W (continuous); 1600 (peak) Crossover 2.2kHz 2.2kHz BF103A LF 12" MF/LF /75mm Voice Coil /300W 15" MF/LF /75mm Voice Coil /350W HF 44 mm Compression Driver/1" Throat /40W 44mm Compression Driver/1" Throat/40W Coverage(HxV) 90°x40° 90°x40° Max.SPL 128dB 130dB Input Connector 2×SPEAKON 2×SPEAKON Suspension system 12 M10 flying points 12 M10 flying points Dimensions (WxHxD) 604x360x335 (mm) 696x415x386 (mm) Weight 22kg 29kg BF103U

P30 FHE12MB(Active) FHE15MB(Active)

Features: > Elegant appearance, wearable, solid, water-proof wooden box. > High performance tweeter and woofer, big power, excellent tone. > Seven M10 flying points makes hanging flexible.

OPTIONAL(5M 10M 15M 20M)

BF103A FHE15MB

Model FHE12MB FHE15MB Type 12"Active Stage Monitor 15"Active Stage Monitor Frequency response 55Hz--20kHz(-10dB) 50Hz--20kHz(-10dB) LF 12"LF/75mm voice coil 15"LF/75mm voice coil HF Ti/PEN diaphragm /44mm voice coil Ti/PEN diaphragm /44mm voice coil Input Sensitivity 0dBu 0dBu Max.SPL 129dB 131dB Amp power rated 300W (LF)+80W (HF) 400W (LF)+80W (HF) Coverage(HxV) 90°×40° 90°×40° Crossover 2.0kHz 2.0kHz Input connectors JACK/XLR JACK/XLR Power supply 230V/115V 230V/115V Dimensions (WxHxD) 608×360×335 (mm) 696×415×386 (mm) Net weight 22kg 28.5kg

P31 KT Series Active Coaxial Loudspeaker

KT315A KT312A

KT328A KT18SA

KT12M KT12MA

Introduction: KT series are three way (dual driver) coaxial active speaker LIMIT/DELAY/volume, etc. The panel operation can be cabinets, each of which consist of an 8 inch MF/HF coaxial replaced by PC operation via the USB connection to PC. speaker (ĭ50mm 8" MF unit /ĭ44mm HF compression driver) Professional software is equipped for PC operation. and LF unit (different size for different model) to deliver high Application: power, round and clear tone, even coverage. The Class D power Conference room, concert hall, multi-function hall, stage amp features high efficiency, high power, compact structure, light monitoring, etc; weight, etc. Features: > Unique shape, compact, light-weighted; durable silver Dual coaxial drivers environmental friendly paint; > Solid plywood with slot-tongue structure cabinet to deliver robust tone; HF unit is located at the > Dual coaxial driver MF/HF unit to offer optimal coverage and to rear part of the MF unit improve sound clearness and resolution; The two units completely > Efficient Class D power amplifier with 1500W load capacity, combine to be a real point HF energy spread via stable performance, low distortion; audio source the center of MF cone > ĭ35mm tray for stand installation; > KT series has DSP function to process EQ/X-OVER/

P32 KT Series Active Coaxial Loudspeaker

KT328A KT312A

KT312A Rear Panel KT328A Cutaway view KT312A Cutaway view      

Model KT328A KT312A

Type Active Coaxial Loudspeake Active Coaxial Loudspeaker Frequency response 65Hz~20kHz(±3dB) 58Hz~18kHz(±3dB) Input Sensitivity 0dBu 0dBu Max SPL(@1m) 135dB(peak) 136dB(peak) Amp. power 1500W 1500W Coverage(HxV) 60°x60° 60°x60° Crossover (LM/MH) 320Hz(Active) 320Hz(Active) 2kHz(Passive) 2.0kHz(Passive) Input Connector RCA/XLR RCA/XLR Input Voltage 230V 230V Supporting system ĭ35 ĭ35 Dimension (WxHxD) 371x721x375(mm) 410x637x403(mm) Weight 25.2kg 27.5kg

P33 KT Series Active Coaxial Loudspeaker

KT312A/KT315A

KT315A KT18SA KT18SA

KT315A Cutaway view KT18SA Cutaway view

     

Model KT315A KT18SA Type Active Coaxial Loudspeake Active Coaxial Subwoofer Frequency response 50Hz~20kHz (±3dB) 35Hz~100Hz (±3dB) Input Sensitivity 0dBu 0dBu Max SPL(@1m) 137dB (peak) 128dB Amp. power 1500W 1500W Coverage(HxV) 60°x60° N/A Crossover (LM/MH) 300Hz(Active) 80Hz /100Hz 2.0kHz(Passive) Input Connector RCA/XLR RCK/XLR Supporting system ĭ35 ĭ35 Dimension (WxHxD) 480x716x472(mm) 650x719x672(mm) Weight 33.6kg 49.5kg

P34 KT Series Stage Monitor Speaker

The stage monitoring series consists of active and passive types. Angles 38°/42°/45°/48°/52° are offered for option. The series is the best choice for stage show and near field reinforcement.

Features: > HF/LF units adopts Nd magnet coaxial design. The strong magnet flux density to improve voice coil efficiency and sensitivity, ensure reproducing original sound and lower distortion; > HF compression driver with Ti/PK compound diaphragm and 75mm KT12M voice coil to ensure sound transparency and clear; KT12MA > Dual class D power amplifier offers sufficient headroom. The switching power supply provides wide dynamic and sound purity. Thermal/power surge/over load/short circuit protection; > Passive LC crossover; PTC protection of HF; high quality components to reproduce original sound; > Unique and novel shape; handles for convenient transportation; > 45°/20° monitoring angle of the enclosure; > Water-proof painting finish; steel grille for protection;

coaxial loudspeaker KT12M rear panel KT12MA rear panel

Model KT12M Type Two way passive monitoring loudspeaker Model KT12MA Frequency response 55Hz -20kHz(±3dB) Type Two way active monitoring loudspeaker Sensitivity(1W@1m) 96dB Frequency response 55Hz -20kHz(±3dB) Nominal Impedance 8Ω Input sensitivity 0dBu Power handling 300W( continuous), 1200W (peak) Amp power rated 350W (LF)+100W (HF) Crossover 1.2kHz Crossover 1.2KHz LF 12” LF/75mm voice coil/Nd magnet LF 12” LF/75mm voice coil / Nd magnet HF 75mm compression driver/1.5” exit/ Nd magnet HF 75 compression driver /1.5” exit / Nd magnet Coverage (HxV) 80°×80° Coverage (HxV) 80°×80° Max SPL 127dB Max SPL 128dB Connector 4×Speakon Connector JACK/XLR Dimension (WxHxD) 468x430x442(mm) Dimension (WxHxD) 468x430x442(mm) Weight 17.5kg Weight 20kg

P35 KT Series Active three-way coaxial system with DSP

Dual coaxial speaker Mellow and clean sound, evenly distributed sound field

Coaxial point audio source, constant directivity unit

HF unit is located at the rear part of LF unit

Two units completely combine to be a real point 1 audio source 9 2 Energy spreads from the same point via the center of LF cone 3 8 4 5 7 6 10 11 12 Adjustable DSP effect

1. Peak lamp 2. Signal lamp 3. Power lamp 4. Menu button: press repeatedly to switch between function 5. Function button 6. Function button 7. Exist and save button 8. USB port: used to connect a PC for data transfer 9. Multifunction encoder button: long press for status adjustment 10. MIC IN 11. LINE IN 12. PRELINK OUTPUT

PC software operation interface: PEQ interface: to drag EQ frequency X-Over interface: to drag X-Over curve via support volume, gain, X-Over, PEQ, via mouse or type in data directly for mouse or type in data directly for setting. delay, limit and other function. To setting. Each EQ frequency can be HIGH and LOW PASS support different import or export user parameters to independently set for LEVEL and Q attenuation. a PC. value. Each channel supports 5 EQ frequencies.

P36 System combination diagram

KT312A KT312A

DB081 (optional) digital mixer DM20

optional MIX08C

KT18SA KT18SA

KT315A KT315A

digital mixer DM20

optional MIX08C

KT18SA KT18SA

KT312A KT312A

digital mixer DM20 KT12MA KT12MAKT12MA

optional MIX08C

KT18SA KT18SA

P37 KV Series Compact Portable Pro Speaker Cabinet

Introduction: KV series speaker cabinet, one of the most compact pro speaker cabinets, is designed by famous UK expert with plywood and durable black finish. The active mode uses Class D module for compact contour and high efficiency, max power 1000W but stable powerful performance. Passive model features Nd magnetic design, high sensitivity, abundant powerful bass. Features: >Compact, light weight; > Class D power amplifier, reliable performance delicate tone; > Nd magnet LF unit(passive) and HF compression design; > Constant directivity horn, coverage 80°x60°; > Also used for 45°stage monitoring; KV12E(passive)/KV12AE(active) > Black durable finish; > Full range speaker cabinet with 13 flying points and pole socket for various installation. Application: Medium/small touring show, entertainment venue, conference room, stage monitoring, etc; KV15E(passive)/KV15AE(active) KV18SE(passive)\KV18SAE(active)

P38 KV Series Compact Portable Pro Speaker Cabinet

KV15AE

KV12AE

KV12AE Rear Panel

KV15AE Cutaway view KV12AE Cutaway view 601 697  

 

Model KV12AE KV15AE Type 12inch 2-way active cabinet 15inch 2-way active cabinet Frequency response 55Hz~20kHz(-10dB)/60Hz~18kHz(-3dB) 45Hz~20kHz(-10dB)/55Hz~18kHz(-3dB) AMP power LF: 205W/HF: 80W LF: 250W/HF: 80W Crossover 1.7kHz 1.5kHz LF unit 12Ǝwoofer / ij34mm voice coil 15 woofer/63.5mm voice coil HF unit Compression driver / ij34mm voice coil Compression driver/34mm voice coil Coverage(HxV) 80° x 60° 80° x 60° Max SPL 125dB 126dB Connector XLR BAL, JACK and RCA XLR BAL, JACK and RCA Dimension 365x341x601(mm) 430x400x697(mm) Net/gross weight 18kg/21kg 21.3kg/25kg

P39 KV Series Compact Portable Pro Speaker Cabinet

KV15E

KV12E

KV12E Cutaway view KV15E Cutaway view 608 697 704  





Model KV12E KV15E Type 12inch 2-way passive cabinet 15inch 2-way passive cabinet Frequency response 55Hz~20kHz(-10dB)/60Hz~18kHz(-3dB) 45Hz~20kHz(-10dB)/55Hz~18kHz(-3dB) Sensitivity 96dB 96dB Impedandce 8Ω 8Ω Rated power 200W(continue), 400W(program),800W(peak) 200W(continue), 400W(program),800W(peak) Crossover 2.5kHz 2.5kHz LF unit 12Ǝ woofer /ij34mm voice coil 15Ǝ woofer /ij63.5mm voice coil HF unit Compression driver / ij34mm voice coil Compression driver /ij34mm voice coil Coverage(HxV) 80° x 60° 80° x 60° Max SPL 125dB 125dB Connector 2 X SPEAKON 2 X SPEAKON Dimension 365x341x608(mm) 430x400x704(mm) Net/gross weight 17.5kg/21.1kg 21kg/26.4kg

P40 KV Series Compact Portable Pro Speaker Cabinet

KV12E KV15E KV18SE KV18SAE

KV18SE KV18SE & KV18SAE Cutaway view KV18SAE

  667

Model KV18SE Type 18inch passive subwoofer Model KV18SAE Frequency response 35Hz~200Hz(-10dB)/45Hz~150Hz(-3dB) Type 18inch active subwoofer Sensitivity(1W@1m) 96dB Frequency response 35Hz~150Hz(-10dB)/45Hz~100Hz(-3dB) Impedance 8Ω AMP power 600W Rated power 400W LF unit 18Ǝsubwoofer/ij75.8mm voice coil LF unit 18Ǝ subwoofer/ij75.8mm voice coil Max SPL 124dB Max SPL 127dB Connector XLR BAL Connector 2xSPEAKON Dimension 530x615x667(mm) Dimension 530x615x674(mm) Net/gross weight 32.7kg/37.5kg Net/gross weight 31.8kg/38.5kg

P41 KV Series Compact Portable Active Speaker Cabinet(with DSP)

Introduction: KV series active speaker cabinets features LF ferrite magnet with symmetric design and heat resistant voice coil for high power load and heat dissipation, KV12AD HF compression driver with Al diaphragm for delicate tone, 24bit 48kHz DSP processor, four tone modes selection, 3 band EQ, low cut, limit, delay, volume control, etc; LCD for various parameter adjustment; Dual power amp design: LF Class-D power amp power amp design: LF Class-D power amp for high efficiency, compact contour,high power, light weight, and reliable performance, HF class AB power amp for pleasant tone. Features: > 1. Unique and compact contour, light weight, black finish; > 15mm plywood with slot tongue; > ij35mm socket for pole mounting; 12 M10 flying points for suspension; > LF Class-D+HF class AB power amplifier, power 350W+50W; > 24bit 48kHz DSP, LCD for tone adjustment, 3 band EQ, low cut, limit, delay, volume control, etc > 12Ǝ15Ǝ full range speaker cabinets are designed with universal power supply. Application: main reinforcement, filling reinforcement, stage monitoring in multifunction hall, auditorium, etc;

This knob adjusts volume normally. Press it to enter into menu to adjust function (4 tone modes/ 3 band EQ/low cut/ delay, etc, diaplayed on LCD). after function adjustment, user can select EXIT to escape out from menu or it escapes out automatically after no operation.

KV12AD Rear Panel 1 Master volume & DSP adjustment 2 LCD 3 Mic/Line volume 4 AUX IN 5 Mic/Line input 6 Output 7 Power switch Model KV12AD 8 Power socket Type 12 inch 2 way active speaker cabinet (DSP) Frequency response 60Hz~18kHz (-3dB) 55Hz~20kHz (-10dB) Input sensitivity LINE:0dBu MIC:-40dBu KV12AD Cutaway view Max SPL 127dB(PeaK) AMP power 350W+50W LF unit 12" woofer/ ĭ63.5mm voice coil HF unit compression driver / ĭ34mm voice coil Coverage(H*V) 80°x60° Crossover 2.5kHz 601 Input connection(H*V) 2xXLR/Jack combo input,3.5mm jack:XLR LINK output

Input voltage 100~240V  Suspension 12*M10 flying points+ĭ35 Dimension(WxHxD) 365*601*341mm Weight(gross) 17.8/20.7 kg 

P42 KV Series Compact Portable Active Speaker Cabinet(with DSP)

KV15AD

1 Master volume & DSPP adjustment 2 LCD 3 Mic/Line volume KV15AD Cutaway view 4 AUX IN 697 5 Mic/Line input 6 Output 7 Power switch 8 Power socket 

 KV18SAD Cutaway view 

KV18SAD 667 

Model KV15AD Type 15 inch 2 way active speaker cabinet (DSP) Frequency response 65Hz~18kHz (-3dB) 45Hz~20kHz (-10dB) Model KV18SAD Input sensitivity LINE:0dBu MIC:-40dBu Type 18inch active speaker cabinet (DSP) Max SPL 128dB(PeaK) Frequency response 45Hz~100Hz (-3dB) AMP power 350W+50W 35Hz~150Hz (-10dB) LF unit 15" woofer/ ĭ63.5mm voice coil Input sensitivity LINE: 0dBu HF unit compression driver / ĭ34mm voice coil Max SPL 130dB (PeaK) Coverage H*V 80°x 60° Amp power 600W Crossover 2.3kHz LF unit 18" subwoofer Input connection(H*V) 2xXLR/Jack combo input,3.5mm jack:XLR LINK output Input connection 2 Balanced XLR in and 2 Balanced XLR out Input voltage 100~240V Input voltage 115V/230V Suspension 12*M10 flying points+ĭ35 Suspension ĭ35 Dimension(WxHxD) 430*697*400mm Dimension(WxHxD) 530*667*615mm Weight(gross) 20.8/25.4kg Weight(gross) 35.1/42 kg

P43 PL Series 4 way long projection audio system

The perfect tone surpasses that of line array

4UPSBHF
ESBXFS
GPS
NJYFS

Product Model qty System configuration: Medium/long projection speaker cabinet PL2 2 pcs PL long projection audio system uses 4 way design to MFLF long projection speaker cabinet PL215 2 pcs offer high SPL, high power, clear and bright HFMF, powerful Medium/long projection subwoofer PL21S 2 pcs bass, thus to substitute traditional line array system; 20CH digital mixer DM20 1 pcs convenient installation, easy operation, high performance MFHF horn power amp AF4200 1 pcs low cost MFLF power amp AG2150 1 pcs The cabinet features premium plywood, durable coating Subwoofer power amp AG2200 1 pcs finish, ergonomic handle, easy transportation, two Power sequencer SPS8 1 pcs professional speaker connectors on the rear panel. Audio processor AP4080-z 1 pcs Application: Large square meeting, touring show, bar, etc;

Features: · >21 inch subwoofer imported from UK ensures powerful GP Series Audio Processor

bass. GF Digital Power Amplifier >Horn design for 4 way GM Digital Power Amplifier >MF unit uses 100mm compound diaphragm compression driver to offer high SPL, high definition and rich tone and Tool box(cable accessories) overcomes the shortcoming of traditional cone speaker. >Convenient installation, easy operation, high performance low cost;

P44 PL Series Mid/Long Throw Speaker

PL2 Features: PL215 Features: PL2 mid/long projection horn speaker cabinet consists PL215 mid/long projection MF/LF speaker cabinet consists of horn of a 100mm MF compression driver and a 75mm HF and two woofers. The LF unit featues NdFeB symmetrical magnet, driver. The MF MgAl/KAPTON compound diaphragm light weight, leakproof magnet, excellent transient and robust features high resolution and SPL. The HF Ceramic/ cone, etc. The speaker cabinet delivers powerful bass, clear vocal, KAPTON compound diaphragm features high SPL. The prominent detailed performance. When used with the full range product is also equipped with specially designed horn to speaker cabinet, the system offers ultra-wide dynamic range. prominently improve the eletro-acoustic efficiency.

PL2 PL215

PL215 Cutaway view

PL2 Cutaway view 450

344 948 539.4 646 669 398

Model PL2 PL215 Type Middle/long projection horn Dual 15” middle/long projection speaker cabinet speaker cabinet Frequency response 450Hz -18kHz 50Hz -1500Hz Nominal Impedance MF: 8Ω / HF: 8Ω 4Ω Rated power MF: 120W ( continuous), 480W (peak) 1000W( continuous), 4000W (peak) HF: 80W( continuous), 320W (peak) Sensitivity(1W@1M) MF: 113dB( continuous), 139dB (peak) 102dB( continuous), 138dB (peak) HF: 112dB ( continuous), 137dB (peak) Coverage (H*V) 100°X60° / Crossover (MF/HF) 2.5 kHz (Active) / Unit MF: 1(100mm)+HF: 1(75mm) 15” x 2 (75mm) Connector 2XNL8MP / Dimension(WxHxD) 344x646x398 mm 450x948x669 mm Weight 28.4kg 45kg

P45 PL Series 21" Subwoofer GL218S

GL218S

Features: > 2x18" passive bass reflex; > 2pcs 100mm ferrite LF units; > Cabinet made from 18mm plywood, exterior treated with black coating.

Model GL218S Type 18"Reflex Loaded Passive Bass Speaker Frequency Response(-10dB) 32Hz - 200Hz Sensitivity(1W@1M) 99dB±3dB Max.SPL(peak 138dB Rated Power 2000W (continuous) 8000W (peak)  Rated Impedance 4Ω Input 2 x speakon LF unit 2X18"subwoofer/100mm voice coil /1800W/4Ω Dimension(WxHxD) 1115 x 585 x 758 (mm) Net weight 83kg  Gross weight 92.3kg 

P46 System Configuration

Recommended Configuration List: Medium/long projection speaker cabinet PL2 2 pcs MFLF long projection speaker cabinet PL215 2 pcs Medium/long projection subwoofer PL218S 2 pcs Digital mixer DM20M 1 pcs Digital amplifier AG4150 2 pcs Digital amplifier AM2400 1 pcs Audio processor DP48 1 pcs

DM20M is the globally first compact digital mixer which features the advantages of premium hardware and iPad remote control, the 4th generation 40 bit SHARC floating point processor, 24bit/192kHz DA/ AD converting, built-in 8 effect modules (reverb, delay, modulation, GEQ. (20 input channels) 12 professional mic and 2 stereo digital input DM20 connectors.16CH BUSes includes 8 assignable analog output and digital output.

AG4150 8Ω / stereo 4×1500W Rated Output Power 4Ω / stereo 4×2550W (THD+N=1%,1kHz 2Ω / stereo 4×3570W continue sine wave, 16Ω / bridge 2×3000W all channel driving 8Ω / bridge 2×5100W 4Ω / bridge 2×7140W

AM2400 8ΩStereo Power 2x2400W 4ΩStereo Power 2x4000W 8ΩBridged Mono Power 8000W 4ΩBridged Mono Power 12000W Frequency Response 20Hz~25kHz±0.5dB THD 0.1% S/N Ratio 110dB Weight 13kg

Analog input / Analog output 4 x XLR bal / 8 x XLR bal DP48 Min load 150 ohm THD+N 0.001% at 1kHz 0dBu S/N >100dBA Frequency response 20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz DSP 4x32bit filter processing, 96bit precision inte- rmediate data calculation PEQ 30 filters for input; 7 filters for output

P47 FW Series For Mobile Outdoor Performance

FW12

FW212/FW215

FW208

INTRODUCTION: FEATURES: FW series speakers represent a high quality, full-range and horn loaded >Light-weight cabinet, waterproof speaker which can make high quality sound and sound reproduction. They >Coaxial structure speaker can be used in any weather condition. >High sensitivity output, >Far sound reproduction. APPLICATIONS: >Safety and reliability flying settings, easy to Stadium, Outdoor Plaza, Conference Center, etc. install

P48 FW Series For Mobile Outdoor Performance

FW208 FW212 FW215

Cutaway view

Model FW208 FW212 FW215 Type 2-way passive speaker 2-way passive speaker 2-way passive speaker LF FH0804H(8”+1”) FB1207H(12") FB1507H(15") HF / FE010(1.7") FE025(3") Frequency response 90Hz~15kHz(-10dB) 90Hz~15kHz(-10dB) 80Hz~18kHz(-10dB) Sensitivity(1W@1m) 95 dB 102dB 104dB Nominal Impedance 8Ω 8Ω 8Ω Power handling 120W (continuous), 480W (peak) 250W (continuous), 1000W (peak) 350W (continuous), 1400W (peak) Max. SPL 122dB 132dB 135dB Coverage(HxV) 60°x 60° 45°x 45° 45°x 45° Dimension(HxWxD) 325x325x345(mm) 450x450x670(mm) 535x535x765(mm) Net Weight 15 kg 27.5 kg 32.5kg Gross Weight 17.5 kg 35 kg 40 kg

P49 FW Series For Mobile Outdoor Performance

INTRODUCTION: The FW12 long throw horn loaded speaker was specially designed for gymnasium. It consists of a 12” woofer and two 44 mm high compression driver. The horn is same with the D series line array loudspeaker with the constant directivity and dual high compression drivers for higher intelligibility.

FEATURES: >Light-weight cabinet, waterproof >Power-Output with high sensitivity FW12 >Coverage with far distance >Professional flying setting with safety and reliability, easy to install

APPLICATIONS: Gymnasium, Stadium, Club Auditorium, Small Venue.

Cutaway view

Model FW12

Type 2-way 12” long distance horn loaded speaker Frequency response 200Hz~16kHz(±3dB) 140Hz~20kHz(-10dB) Sensitivity (1w@1m) 106dB Power handling 300W (continuous), 1200W (peak) Nominal impedance 8Ω Horn Coverage(H*V) 50°x25° Crossover 2.2kHz LF 1x12" paper cone woofer HF 2x44mm HF compression driver (1" exit) Max. SPL 137dB Dimension(W x H x D) 617x707x700mm Net Weight 34kg

P50 FHE Series Pro Active & Passive Speakers

FHE8A FHE8 FHE215A FHE215

FHE212A FHE212

FHE15A FHE18SA FHE15 FHE12A FHE18S FHE12 FHE10A FHE10

FHE12MA FHE15MA FHE12M FHE15M

FHE12MB FHE15MB

Instruction: FHE series of cabinets are the optimal selection for fixed installation reinforcement and touring show system. This series of cabinets have various of model, especially the high power dual 15” and dual 12” models, for specific application environment and audio reinforcement requirement.

Features: >The magnet configuration of woofer greatly reduces distortion. Winding voice coil increases the surface of voice coil and heat dissipation. >High sensitivity, power and efficiency >Tweeter with 3” and 1.74”voice coil, horn with constant directivity, rational power design, ensure elegant tone and sufficient power margin. >Water proof paint and grille with waterproof structure for the applications in various weather >Fourteen M10 screws for hanging, standard pole mounting, quick set up, multi-angle hanging >wheels of dual 12” and dual 15” cabinet for easy moving

Applications: This series of cabinets are suitable for the applications in bar, coffee bar, disco hall, cinema, theatre, multi-purpose hall, medium or small sized stadium, concert, outdoor show, meeting, etc.

P51 FHE Series Pro Active Speakers

FHE8A FHE10A FHE12A FHE15A

Cutaway view

Model FHE8A FHE10A FHE12A FHE15A

Type 2- way 8” active loudspeaker 2- way 10” active loudspeaker 2- way 12” active loudspeaker 2- way 15” active loudspeaker Frequency response 65Hz~20kHz(-10dB) 55Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) 40Hz~20kHz(-10dB) Max SPL 120dB 124dB 126dB 128dB Coverage(H*V) 90°x60°(rotatable) 90°x60°(rotatable) 90°x60°(rotatable) 90°x60°(rotatable) Crossover 3.0kHz 2.5kHz 1.8kHz 1.5kHz LF 8”MF/LF / 50mm Voice Coil 10”MF/LF / 75mm Voice Coil 12”MF/LF / 75mm Voice Coil 15”MF/LF / 75mm Voice Coil HF PK diaphragm / 44mm Voice Coil PK diaphragm / 44mm Voice Coil PK diaphragm / 44mm Voice Coil Ti / PEN diaphragm / 75mm Voice Coil Input connector JACK / XLR JACK / XLR JACK / XLR JACK / XLR Input sensitivity 0dBu 0dBu 0dBu 0dBu Amp power rated 200W(LF)+60W(HF) 300W(LF)+60W(HF) 350W(LF)+100W(HF) 400W(LF)+100W(HF) Dimension(WxHxD) 300x514x330(mm) 340x578x357(mm) 390x660x409(mm) 424x740x437(mm) Weight 18kg 21kg 26kg 36kg

P52 FHE Series Pro Active Speakers

FHE18SA

FHE12 FHE15

SB310

FHE18SA

Cutaway view

1 L signal input connector

2 L signal link output connector 3 L high pass signal output connector 4 R signal input connector

5 R signal link output connector

6 R high pass signal output connector

7 Volume Model FHE18SA 8 Ground/float switch 18” active subwoofer Type 9 Fan Frequency response 35Hz~100Hz(-10dB) 10 Power switch Max SPL 128dB Crossover 80Hz/100Hz 11 Fuse LF 18”/100mm Voice Coil 12 Power socket Input connector JACK / XLR 13 Low pass signal crossover switch Input sensitivity 0dBu 14 Sub LF phase switch Power amp rated 750W Dimension(WxHxD) 568x627x710(mm) 15 Power/signal/peak indicato Weight 58.5kg

P53 FHE Series Pro Active Speakers

FHE212A FHE215A 1 line input 2 line output

3 power LED

4 volume

5 HF EQ

6 MF EQ

7 LF EQ

8 low cut switch(80Hz)

9 power switch

10 voltage selection switch 11 fuse 12 power connector

Cutaway view

Model FHE212A FHE215A

Type 2-way 2x12” active loudspeaker 2-way 2x15” active loudspeaker Frequency response 45Hz~20kHz(-10dB) 40Hz~20kHz(-10dB) Max SPL 131dB 132dB Coverage(HxV) 90°x60°(rotatable) 90°x60°(rotatable) Crossover 1.7kHz 1.5kHz LF 2x12”MF/LF/75mm Voice Coil 2x15”MF/LF/75mm Voice Coil HF Ti / PEN diaphragm/75mm Voice Coil Ti / PEN diaphragm/75mm Voice Coil Input connector JACK / XLR JACK / XLR Input sensitivity 0dBu 0dBu Amp power rated 700W(LF)+100W(HF) 750W(LF)+100W(HF) Dimension(WxHxD) 405x989x445(mm) 450x1153x508(mm) Weight 36kg 52kg

P54 FHE Series Pro Active Speakers

FHE8 FHE10 FHE12 FHE15

Cutaway view

Model FHE8 FHE10 FHE12 FHE15 Type 2-way 8" Passive Speaker 2-way 10" Passive Speaker 2-way 12" Passive Speaker 2-way15" Passive Speaker Frequency response 60Hz~20kHz(-10dB) 55Hz~20kHz(-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) Max. SPL 120dB 125dB 128dB 130dB Sensitivity(1W@1m) 92dB 95dB 97dB 98dB Nominal Impedance 8Ω 8Ω 8Ω 8Ω Power handling 150W (continuous) , 600W (peak) 250W (continuous) , 1000W (peak) 300W (continuous) , 1200W (peak) 400W (continuous) , 1600W (peak) Coverage(HxV) 90°x40°( Rotatable ) 90°x60°( Rotatable ) 90°x60°( Rotatable ) 90°x60°( Rotatable ) Crossover Freq 2.5kHz 2.5kHz 2.1kHz 2.0kHz LF 8”MF/LF / 50mm Voice Coil 10”MF/LF / 65mm Voice Coil 12”MF/LF / 75mm Voice Coil 15”MF/LF / 75mm Voice Coil HF Ti diaphragm / 44mm Voice Coil PK diaphragm / 44mm Voice Coil PK diaphragm / 44mm Voice Coil Ti / PEN diaphragm / 75mm Voice Coil Dimension(WxHxD) 300x514x330(mm) 340x578x357(mm) 390x660x409(mm) 424x740x437(mm) Gross Weight 14kg 16.5kg 21kg 31kg

P55 FHE Series Pro Active Speakers

FHE12 FHE212 FHE15 FHE215

FHE18S

FHE18SA

Cutaway view

Model FHE212 FHE215 FHE18S Type 2-way2x12" Passive Speaker 2-way2x15" Passive Speaker 18" Passive sunbwoofer Frequency response 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) 31Hz~200Hz(-10dB) Max. SPL 133dB 135dB 133dB Sensitivity(1W@1m) 99dB 100 dB 98dB Nominal Impedance 4Ω 4Ω 8Ω Power handling 650W (continuous) , 2600W (peak) 800W (continuous) , 3200W (peak) 700W (continuous) , 2800W (peak) Coverage(HxV) 90°x60°( Rotatable ) 90°x60°( Rotatable ) / Crossover Freq 2.2kHz 2.2kHz / LF 12”MF/LF / 75mm Voice Coil 15”MF/LF / 75mm Voice Coil 18”MF/LF / 100mm Voice Coil HF Ti / PEN diaphragm / 75mm Voice Coil Ti / PEN diaphragm / 75mm Voice Coil / Dimension(WxHxD) 405x989x445(mm) 450x1153x508(mm) 568x627x710(mm) Gross Weight 31kg 45kg 46.5kg

P56 K Series Engineering Speaker Series

EXCELLENT QUALITY SPEAKER OF THE YEAR 2008 CERTIFICATE BY CETA

In the “Excellent Quality Speaker of the Year 2008 Selection” hold on February, 2008 by China Entertainment Technology Association, experts evaluate Soundking speaker as “beautiful and soft tone, better balance; all types of musical instruments sound natural and true, with better restoring ability. Treble bright, structured and effective, high definition and in electro-acoustical performance aspect, K212 has smooth impedance curve, high sensitivity, and low distortion." KK212212 is one member of the SoundkingSoundking “K” series family, with SoundkingSoundking engineers’engineers’ tremendous efforts, aandnd afterafter carefulcareful comparison,comparison, K212K212 andand K215K215 were chosenchosen as thethe representativerepresentative to participationparticipation inin thisthis ggrandrand event. With innumerable test in the sound reinforcement projects, its success has proved the excellentexcellent quality of K series speakers.speakers.

K215

K2215 K210

K2212

K1218S K18S

K212F K215F

Instruction: K series speaker is specially designed for projects application. and true, with better restoring ability; treble bright, structured and With a wide range of specifications, and optimized effective, high definition, K series speaker is optimal for all sound configuration, this series may adapt many kinds of sound reinforcement projects. reinforcement projects. Applications: Features: K series speaker can be widely applied for large-scale theater, live With good appeal, compact, and convenient to install and performance, stadium, mobile performance and all other sound pack; high power and stability; beautiful and soft tone, better reinforcement projects. balance; all types of musical instruments sound natural

P57 K Series Engineering Speaker Series

K210 K212 K215

Cutaway view

Model K210 K212 K215 Type 2-way 10” full range speaker 2-way 12” full range speaker 2-way 15” full range speaker Frequency response 70Hz-18kHz (-10dB) 65Hz-18kHz (-10dB) 60Hz-18kHz (-10dB) Sensitivity(1W@1m) 96dB 97dB 98dB Nominal Impedance 8Ω 8Ω 8Ω Power handling 250W (continuous), 1000W (peak) 300W (continuous), 1200W (peak) 400W (continuous), 1600W(peak) Crossover 2.2kHz 2kHz 1.8kHz LF 10” middle and bass/65mm voice coil 12” middle and bass/75mm voice coil 15” middle and bass/75mm voice coil HF PK membrane/44mm voice coil PK membrane/44mm voice coil Ti/ PK composite membrane/75mm voice coil/neodymium magnet Coverage(HxV) 90°x50° 90°x50° 80°x50° Max. SPL 126dB 128dB 130dB Dimension(WxHxD) 308x502x320(mm) 358x581x380(mm) 418x708x425(mm) Weight 20kg 25kg 31kg

P58 K Series Engineering Speaker Series

K2212 K2215

CutawayCutaway viviewe

Model K2212 K2215 Type 2x12" 2-way full range speaker 2x15" 2-way full range speaker Frequency response 50Hz~18kHz(-10dB) 45Hz~18kHz(-10dB) Sensitivity(1W@1m) 99dB 100dB Nominal Impedance 4Ω 4Ω Power handling 600W (continuous), 2400W (peak) 800W (continuous), 3200W (peak) Crossover 1.7kHz 1.6kHz LF 2x12” MF/LF/75mm voice coil 2x15” MF/LF/75mm voice coil HF Ti / PK diaphragm / 75mm voice coil / neodymium magnet Ti / PK diaphragm / 75mm voice coil / neodymium magnet Coverage(HxV) 80°x50° 80°x50° Max SPL 133dB 135dB Dimension(WxHxD) 418x917x410 (mm) 481x1076x480 (mm) Weight 41kg 49kg

P59 K Series Engineering Speaker Series

K18S K1218S

K18S Cutaway view K1218S Cutaway view

Model K18S K1218S Type 18"Low-frequency 2x18”woofer Frequency Response 40Hz~150Hz(-10dB) 35Hz~150Hz(-10dB) LF 18" / 100mm Voice coil 2x18”/(100mm) voice coil Sensitivity (1W@1M) 97dB 100dB Nominal Impedance 8Ω 4Ω Power handling 600W (continuous), 2400W(peak) 1200W (continuous), 4800W(peak) Max. SPL 131dB 137dB Dimensions (WxHxD) 568x627x710 (mm) 1236x568x710(mm) Weight 46kg 82kg

P60 K Series Engineering Speaker Series

K212F K215F

The membrane (i.e. paper cone) is mainly composed of the paper pulp and the carbon filament, light, and with high rigidity. The paper cone dimension is comparatively big, the intermediate frequency response and transient response are super.

Cutaway view

Model K212F K215F

Type 2-way 12” full range speaker 2-way 15” full range speaker Frequency response 65Hz~18kHz(-10dB) 60Hz~18kHz(-10dB) Sensitivity(1W@1m) 97 dB 98 dB Nominal Impedance 8Ω 8Ω Power handling 300W (continuous), 1200W (peak) 400W (continuous), 1600W (peak) Crossover 2kHz 1.8kHz LF 12” MF/LF/75mm voice coil 15” middle and bass/75mm voice coil HF PK membrane/44mm voice coil Ti / PK diaphragm / 75mm voice coil / neodymium magnet Coverage(HxV) 90°x50° 80°x50° Max SPL 128dB 130dB Dimension(WxHxD) 380x585x383(mm) 445x706x431(mm) Weight 25kg 31kg

P61 KA Series Entertainment Audio System

KA215 KA215A KA12 KA12A

KA15 KA15A KA10 KA10A

KA1512 KA1512A KA1815 KA1815A KA15S KA15SA

KA18S KA218S KA18SA

KA15M KA15MA

Instruction: Soundking“KA”series speaker is designed specially for stage engineering application. It features new aspects, complete specification, and economical configuration. Its furnishing can be painting or velvet for option according to the different needs. And it is applicable for bar, coffee hall, club, middle& small performance locations, etc.

Features: > Cabinet adopts MDF, strong strength, and is very economical. > Woofer adopts high temperature-resistant KAPTON voice coil frame, high efficient magnetic circuit design. > Tweeter adopts aluminum diaphragm and PEN diaphragm, accurate phase corrector ensure the cleanness of high frequency . > Accurately designed crossover network ensure the speaker’s sound quality can be reproduced truly. > It sets build-in LC crossover with high frequency protection of low distortion. > It features 12 M10 hanging system, convenient and safe hanging setting. > ĭ35mm bracket holes ensure the stability of product fixed installation.

P62 KA Series Active Entertainment Audio System

KA10A KA12A KA15A MIC input MIC volume control

LINE volume control LINE input

HIGH tone control LINE output LOW tone control 80Hz low cut switch

Voltage selection swith

AC socket Power switch

KA10A/KA12A/KA15A Rear Panel

452.6

Cutaway view 409

353.5 710 628 555

Model KA10A KA12A KA15A Type 10 " 2way active speaker 12 " 2way active speaker 15 " 2way active speaker Frequency response 60Hz-20kHz(-10dB) 50Hz-20kHz(-10dB) 45Hz-20kHz(-10dB) Sensitivity(1W@1m) -10dBV±1dBV -10dBv±1dBv -10dBv±1dBv Amp power rated 200W 250W 250W Crossover 2.0kHz 2.2kHz 2.0kHz LF 10" woofer 50 mm voice coil 12" woofer 65 mm voice coil 15" woofer 65 mm voice coil HF 34mm driver/1inch exit 34mm driver/1inch exit 34mm driver/1inch exit Coverage(HxV) 80°x60° 80°x60° 80°x60° Max SPL 121dB 123dB 123dB Dimension(WxHxD) 353.5x555x426(mm) 409x628x472 (mm) 452.6x710x518(mm) Weight 20.8kg 25.5kg 31.3kg

P63 KA Series Active Entertainment Audio System

KA10 KA12 KA15

452.6

Cutaway view 409

353.5 710 628 555

Model KA10 KA12 KA15 Type 10" 2 way passive speaker 12" 2 way passive speaker 15" 2way passive speaker Frequency response 60Hz—20kHz(-10dB) 50Hz—20kHz(-10dB) 45Hz—20kHz(-10dB) Sensitivity(1W@1m) 94dB 96dB 96dB Nominal Impedance 8Ω 8Ω 8Ω Power handling 200W( continuous), 800W (peak) 250W( continuous),1000W (peak) 250W( continuous), 1000W (peak) Crossover 2.0kHz 2.2kHz 2.0kHz LF 10" LF/50mm voice coil 12" LF/65mm voice coil 15" LF/65mm voice coil HF 34mm driver/1" exit 34mm driver/1" exit 34mm driver/1inch exit Coverage(HxV) 80°x60° 80°x60° 80°x60° Max SPL 121dB 123dB 123dB Input mode 2×SPEAKON+2×JACK 2×SPEAKON+2×JACK 2×SPEAKON+2×JACK Dimension(WxHxD) 353.5x555x426 (mm) 409x628x472 (mm) 452.6x710x518 (mm) Weight 19.1kg 23kg 28.6kg

P64 KA Series Active Entertainment Audio System

MIC volume control TREBLE control

MIC volume control BASS control KA215A

LINE in 80Hz low cut switch

LINE in LIM output

Breaker Power switch

Voltage selection switch AC socket

KA215A Rear Panel

KA215A Cutaway view

471.7 538

Model KA215A Bottom wheels for easy moving Type 2x15 " active woofer Frequency response 40Hz-20kHz(-10dB) Sensitivity(1W@1m) -10dBv±1dBv Amp power rated 500W Crossover 2.2kHz LF 2x15" woofer 65 mm voice coil HF 44mm compression driver /1 inch exit Coverage(HxV) 80°x60° Max SPL 129dB Dimension(WxHxD) 471.7X1050X538(mm) Weight 54.7kg

P65 KA Series Passive Entertainment Audio System

KA215

KA215 Cutaway view

Model KA215

Type 2×15 " two way passive full range speaker Frequency response 40Hz-20kHz(-10dB) Sensitivity(1W@1m)) 99dB Bottom wheels for easy moving Nominal Impedance 4Ω Power handling 500W( continuous), 2000W (peak) Crossover 2.2kHz LF 2x15" LF /65mm voice coil HF 44mm compression driver /1 inch exit Coverage(HxV) 80°x60° Max SPL 129dB Input mode 2×SPEAKON+2×JACK Dimension(WxHxD) 469x1050x538 (mm) Weight 48kg

P66 KA Series Active Entertainment Audio System

KA1512A (KA15SA+KA12A)

KA18SA Cutaway view KA15SA Cutaway view

Model KA15SA KA18SA Type 15" active subwoofer 18" active subwoofer Frequency response 35Hz-250Hz(-10dB) 38Hz-250Hz(-10dB) Sensitivity(1W@1m) -10dBu±0.5 dBu -10dBu±0.5 dBu Amp power rated 400W 500W LF 15" woofer 75mm voice coil 18" woofer 75mm voice coil Max SPL 125dB 126dB Dimension(WxHxD) 479x581x548 (mm) 567x667x600 (mm) Weight 47.6kg 57.8kg

P67 KA Series Passive Entertainment Audio System

KA1815 (KA18S+KA15)

KA15S Cutaway view

KA18S Cutaway view

Model KA15S KA18S Type 15 " subwoofer 18 " subwoofer Frequency response 40Hz-250Hz(-10dB) 38Hz-250Hz(-10dB) Sensitivity(1W@1m)Nominal 96dB 96dB Impedance 8Ω 8Ω Power handling 600W( continuous), 2400W (peak) 600W( continuous), 2400W (peak) LF 15" woofer/100mm voice coil 18" woofer/100mm voice coil Max SPL 127dB 127dB Input mode 2×SPEAKON+2×JACK 2×SPEAKON+2×JACK Dimension(WxHxD) 479x581x548 (mm) 567x667x600(mm) Weight 35.2kg 47.5kg

P68 KA Series Entertainment Audio System

KA15M (Passive) KA15MA (Active) KA218S

KA15M/KA15MACutaway view

KA218S Cutaway view

Model KA15M KA15MA Model KA218S Type 15" 2way passive speaker 15" 2way active speaker Type 2x18" Subwoofer Frequency response 45Hz-20kHz(-10dB) 45Hz-20kHz(-10dB) Frequency response 33Hz-150Hz Sensitivity(1W@1m) 97dB -10dBv±1dBv Sensitivity(1W@1m) 100dB Nominal Impedance 8Ω / Power handling 1200W( continuous), 4800W (peak) Power handling 250W( continuous), 1000W (peak) 250W Max SPL 131dB Crossover 2.2kHz 2.2kHz LF 2x18" woofer 100mm voice coil LF 15" LF/65mm voice coil 15" woofer 65mm voice coil Dimension(WxHxD) 1200x520x700 (mm) HF 34mm driver/1inch exit 34mm driver/1" exit Weight 84kg Coverage(HxV) 80°x60° 80°x60° Max SPL 124dB 124dB Input mode 2×SPEAKON+2×JACK / Dimension(WxHxD) 429x635x484 (mm) 429X635X484(mm) Weight 22kg 24.7kg

P69 KK Series Entertainment Audio System

KK10

KK15 KK12

KK153

KK18S

KK15S

Instruction: Based on advancedced circircuitcuitat aandnd eleelectro-acousticctro-acoustis c ttechnology,echnology, Soundking KK entertainmentertainment loudspeakers are specspeciallyiliallly desddesignedigni edd to reproduce powerfulerful babass,ss, roroundund MF,MF, cclearlear ttreble.reble. The uuniquenique and > Tweeter adopts Ti/polyimide diaphragm and Alu winding concise enclosure is designed by CAD. They can be used with many voice coil to ensure delicate subwoofers together, and are the optimal models for entertainment > Tone. 15" 18" or 21" subwoofer can be used for the system application. to enhance more powerful bass. > Twelve M10 suspension points make quick and reliable Features: setup. > Unique and elegant enclosure. Black environment protection imported from Germany; Application: > RDM cone and dual winding voice coil for woofer ensures wide Bar, disco, entertainment places; dynamic operation.

P70 KK Series Entertainment Project Speaker Series

KK12

KK10

KK10 Cutaway view KK12 Cutaway view

Model KK10 KK12 Type 10" 2-way full range speaker 12" 2-way full range speaker Frequency response 65Hz-18kHz(±3dB) 55 Hz-18 kHz(±3dB) Sensitivity(1W@1m) 96 dB 97 dB Nominal Impedance 8Ω 8Ω Power handling 250W(Continuous), 1000W(peak) 300W(Continuous), 1200W(peak) Crossover 2.2kHz 2kHz LF 10 "LF/MF / 65mm voice coil 12 "LF/MF / 75 mm voice coil HF polyimide diaphragm / 44mm voice coil polyimide diaphragm / 44 mm voice coil Coverage (HxV) 70 °x70 ° 90 ° x 50 ° Max.SPL 126dB 128dB Connection socket 2XNL4MP 2XNL4MP Dimension (WxHxD) 325x484x308 (mm) 369x570x348 (mm) Weight 17kg 24 kg

P71 KK Series Entertainment Project Speaker Series

KK153

KK15

KK15 Cutaway view KK153 Cutaway view

Model KK15 KK153 Type 15" 2-way full range speaker 3-way dual driver 15” full range loudspeaker Frequency response 50 Hz-18 kHz(±3dB) 55 Hz-18 kHz(±3dB) Sensitivity(1W@1m) 98 dB LF: 97dB, MF+HF: 103 dB Nominal Impedance 8Ω LF:8Ω, MF+HF:8Ω Power handling 400W(Continuous) ,1600W(peak) LF:500W(Continuous) ,2000W(peak) MF+HF:150W(Continuous) ,600W(peak) Crossover 1.5kHz 650Hz Active, 3.3kHz passive LF 15 "LF/MF / 75 mm voice coil 15 "LF/MF / 100 mm voice coil MF / 6.5” mid range HF polyimide diaphragm/75mm voice coil Alu diaphragm 34mm voice coil tweeter(Nd magnet) Coverage(HxV) 80 ° x 50 ° 65 ° x 40 ° Max.SPL 130dB 132dB Connection socket 2XNL4MP 2XNL4MP Dimension (WxHxD) 441x690x400 (mm) 459x720x416 (mm) Weight 31 kg 35 kg

P72 KK Series Entertainment Project Speaker Series

KK18S

KK15S

KK15S Cutaway view KK18S Cutaway view

Model KK15S KK18S Type 1x15” woofer 18” woofer Frequency response 30 Hz-220Hz(±3dB) 40 Hz-200Hz(±3dB) Sensitivity(1W@1m) 95dB 97dB Impedance 8Ω 8Ω Power handling 400W (continuous), 1600W(peak) 700W (continuous), 2800W (peak) LF 15 " / 75 mm voice coil 18 " / 100 mm voice coil Max.SPL 127dB 132dB Connection socket 2XNL4MP 2XNL4MP Dimension (WxHxD) 518x635x490 (mm) 590x722x575 (mm) Weight 31 kg 45kg

P73 KJ Series Active &Passive Entertainment Audio System

KJ215 KJ215A

KJ12 KJ12A

KJ15 KJ15A

KJ10 KJ10A

KJ18S KJ18SA KJ15M KJ15MA

Introduction: Features: KJ series (active and passive) are the newly designed >Black carpet finish,metal corners,unique contour; products which feature high sensitivity, high SPL, unique >High efficiency, low distortion class D power amplifier; and graceful contour, high performance but low cost. The >Bright and full treble,powerful bass,clear vocal; metal grille protects the components inside. The whole series Application: consists of 12 models.Each model can be mounted on Suitable for the professional reinforcement application, e.g. 35mm speaker stand and is designed with recessed handle, stage show, touring show, bar,etc; and KJ215 has castors for easy transportation.

P74 KJ Series Active Entertainment Audio System

KJ10A KJ12A KJ15A

KJ15A Rear Panel

KJ10A Cutaway view KJ12A Cutaway view KJ15A Cutaway view 450 402 340 690 615 509

Model KJ10A KJ12A KJ15A Type 10 ” active loudspeaker 12 ” active loudspeaker 15 ” active loudspeaker Frequency response 60Hz-20kHz(-10dB) 55Hz-20kHz(-10dB) 45Hz-20kHz(-10dB) Input sensitivity 0dBu±0.5dBu 0dBu±0.5dBu 0dBu±0.5dBu Amp power rated 250W(LF),50W(HF) 250W(LF),60W(HF) 250W(LF),60W(HF) Crossover 2.0kHz 2.2kHz 2.0kHz LF unit 10" woofer 50mm voice coil 12" woofer 65mm voice coil 15" woofer 65mm voice coil HF unit 34 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit Coverage(HXV) 80°x60° 80°x60° 80°x60° Max SPL 123dB 124dB 125dB Dimension(WXHXD) 340×509×332(mm) 402×615×413(mm) 450×690×465(mm) Weight 18.4kg 24.7kg 30kg

P75 KJ Series Active Entertainment Audio System

KJ215A KJ15MA KJ18SA KJ18SA Rear Panel

KJ215A Cutaway view 470.5

KJ15MA Cutaway view KJ18SA Cutaway view

720 540 1047 661 460

Model KJ215A KJ15MA KJ18SA Type 2 x 15 " active loudspeaker 15 " active monitor 18 " active subwoofer Frequency response 45Hz-20kHz(-10dB) 43Hz-20kHz(-10dB) 33Hz-250Hz(-10dB) Input sensitivity -5dBv 0dBu±0.5dBu -10dBu±2dBu Amp power rated 700W(LF),80W(HF) 250W(LF),60W(HF) 900W Crossover 2.0kHz 2.0kHZ LF unit 2 x 15" woofer 75mm voice coil 15" woofer 65mm voice coil 18" woofer 100mm voice coil HF unit 44 mm compression driver/1 inch exit 44 mm compression driver/1 inch exit Coverage(HxV) 80°x60° 80°x60° Max SPL 130dB 125dB 130dB Boottom wheels 720×460×404(mm) Dimension(WxHxD) 470.5×1047×477(mm) 540×661×622(mm) for easy moving Weight 51kg 28.6kg 53.6kg

P76 KJ Series Passive Entertainment Audio System

KJ10 KJ12 KJ15

KJ10 Cutaway view KJ12 Cutaway view KJ15 Cutaway view 450 402 340 690 615 509

Model KJ10 KJ12 KJ15 Type 10 ” passive loudspeaker 12 ” passive loudspeaker 15 ” passive loudspeaker Frequency response 65Hz-20kHz(-10dB) 55Hz-20kHz(-10dB) 45Hz-20kHz(-10dB) Sensitivity(1W@1m) 94dB 95dB 96dB Nominal Impedance 8 Ohm 8 Ohm 8 Ohm Power handling 200W(coutinuous),800W(Peak) 250W(coutinuous),1000W(Peak) 350W(coutinuous),1400W(Peak) Crossover 2.7kHz 2.7kHz 2.5kHz LF unit 10" woofer 50mm voice coil 12" woofer 65mm voice coil 15" woofer 75mm voice coil HF unit 34 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit Coverage(HXV) 80°x60° 80°x60° 80°x60° Max SPL 123dB 125dB 127dB Dimension(WXHXD) 340×509×332(mm) 402×615×413(mm) 450×690×465(mm) Weight 16.8kg 23kg 29.5kg

P77 KJ Series Passive Entertainment Audio System

KJ215 KJ15M KJ18S

KJ215 Cutaway view 470.5

KJ15M Cutaway view KJ18S Cutaway view

720 540 1047 661 460

Model KJ215KJ15M KJ18S Type 15 ” passive loudspeaker 15 ” passive monitor 18 ” passive subwoofer Frequency response 40Hz-20kHz(-10dB) 45Hz-20kHz(-10dB) 33Hz-250Hz(-10dB) Sensitivity(1W@1m) 98dB 96dB 97dB Nominal Impedance 4 Ohm 8 Ohm 8 Ohm Power handling 700W(coutinuous),2800W(Peak) 350W(coutinuous),1400W(Peak) 500W(coutinuous),2000W(Peak) Crossover 2.0kHz 2.4kHz LF unit 15" woofer 75mm voice coil 15" woofer 75mm voice coil 18" woofer 100mm voice coil HF unit 44 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit Coverage(HXV) 80°x60° 80°x60° Max SPL 132dB 127dB 130dB Boottom wheels Dimension(WXHXD) 470.5×1047×477(mm) 720×460×404(mm) 540×661×662(mm) for easy moving Weight 47.1kg 27.3kg 51.5kg

P78 L Series Engineering Speaker Series

L12

L15

L10 L215

L212

L18S

L218S

Features: > LF section adopts copper/aluminum voice coil, magnetic circuit with high efficiency of dissipation; > HF section adopts accurate phase corrector, excellent Titanium diaphragm; > Switching between LC crossover and external crossover can meet demanding mixing requirement. HF protection circuit makes distortion low; > Five aluminum bars for easy hanging; > Tray with two holes for easy and quick set up.

Applications: Suitable for the applications in multi-purpose hall, show hall, meeting room and auditorium.

P79 L Series Engineering Speaker Series

L10 L12 L15

Cutaway view

Model L10 L12 L15 Type 10”two way full range cabinet 12”two way full range cabinet 15”two way full range cabinet Frequency response 55Hz~20kHz (-10dB) 50Hz~20kHz(-10dB) 43Hz~20kHz(-10dB) 60Hz~18kHz (±3dB) 55Hz~18kHz(±3dB) 48Hz~18kHz(±3dB) Sensitivity(1W@1m) 94 dB 94 dB 97 dB Nominal Impedance 8Ω 8Ω 8Ω Power handling 250W (continuous), 1000W (peak) 500W (continuous), 2000W (peak) 600W (continuous), 2400W (peak) Crossover 2kHz 1.4kHz 1.5kHz LF 10" MF/LF / 65mm Voice coil 12" MF/LF / 100mm Voice coil 15" MF/LF / 100mm Voice coil HF PK Diaphragm / 34mm Voice coil Ti/PEN Daphragm / 75mm Voice coil Ti/PEN Daphragm / 75mm Voice coil Coverage(HxV) 90°x40° 80°x60° 80°x60° Max. SPL 124dB 128dB 131dB Dimension(WxHxD) 310x530x290 (mm) 380x660x367.5(mm) 430x760x418.6(mm) Weight 22kg 34kg 41kg

P80 L Series Engineering Speaker Series

L212 L18S L218S L215

Cutaway view

Model L212 L215 L18S L218S Type 2X12”two way full range cabinet 2X15”two way full range cabinet 18”woofer Dual 18” woofer Frequency response 50Hz~20kHz(-10dB) 43Hz~20kHz(-10dB) 33Hz~150Hz (-10dB) 33Hz~150Hz (-10dB) 55Hz~18kHz(±3dB) 48Hz~18kHz(±3dB) 40Hz~125Hz (±3dB) 40Hz~125Hz (±3dB) Sensitivity(1W@1m) 99dB 99dB 98dB 103dB Nominal Impedance 4Ω 4Ω 8Ω 4Ω Power handling 600W (continuous), 2400W (peak) 1000W (continuous), 4000W (peak) 700W (continuous), 2800W (peak) 1400W (continuous), 5600W (peak) Crossover 1.4kHz 1.4kHz 150Hz 150Hz LF 2X12”MF/LF / 75mm Voice coil 2X15”MF/LF / 100mm Voice coil 18" / 100mm Voice coil 2X18" / 100mm Voice coil HF Ti/PK Diaphragm / 75mm Ti/PK diaphragm / 75mm / / Voice coil / neodymium magnet Voice coil / neodymium magnet / / Coverage(HxV) 80°X60° 80°X60° / / Max. SPL 133dB 135dB 134dB 134dB Dimension(WxHxD) 428x920x426(mm) 494x478x1090(mm) 556x650x653 (mm) 1032x620x720 (mm) Weight 58.5kg 61kg 46kg 84kg

P81 H Series Stage Speaker Series

Instruction: H series of cabinets adopt high quality components. HF is equipped with over current protection and PTC protection to improve the cabinet reliability. H series of cabinets are suitable for touring show, meeting room, multi-purpose hall, bar, club, etc. Features: >Elegant appearance, environmental protection water-paint; >Wearable, solid, water-proof wooden box >High power/sensitivity, sweet tone, rich human voice, powerful bass >Over-current protection and PTC protection for HF >Twelve M10 flying points for quick set up and adjustment

Applications: >Reinforcement system for touring show, meeting room, multi-purpose hall, bar, club, etc; >Auxiliary system in medium/large meeting room, auditorium, etc;

H215

H15

H12 H18S H10

H08

P82 H Series Stage Speaker Series

H08 H10 H12 H15

441

379 Cutaway view 326

268 666 569 484 420

Model H08 H10 H12 H15 Type 2-way 8”full range cabinet 2-way 10”full range cabinet 2-way 12” full range cabinet 2-way 15”full range cabinet Frequency response 75Hz~20kHz (-10dB) 55Hz~20kHz (-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) Sensitivity(1W@1m) 92 dB 94 dB 96 dB 97 dB Nominal Impedance 8Ω 8Ω 8Ω 8Ω Power handling 150W (continuous), 600W (peak) 200W (continuous), 800W (peak) 300W (continuous), 1200W (peak) 400W (continuous), 1600W (peak) Crossover 2.7kHz 2.5kHz 2.5kHz 2.5kHz LF 8" MF/LF / 50mm voice coil 10" MF/LF / 65mm voice coil 12" MF/LF / 75mm voice coil 15" MF/LF / 75mm voice coil HF PEN diaphragm / 34mm voice coil PEN diaphragm/ 34mm voice coil PEN diaphragm / 44mm voice coil PEN diaphragm / 44mm voice coil Coverage(HxV) 90°x40° 90°x40° 90°x60° 90°x60° Max. SPL 120dB 123dB 127dB 129dB Weight 11Kg 18.5kg 24.5Kg 32Kg Dimension(WxHxD) 268x420x247 (mm) 326x484x319 (mm) 379x569x369(mm) 441x666x427(mm)

P83 H Series Stage Speaker Series

H215 H18S

Cutaway view 475 1060

Model H215 H18S Type 2x15”two way full range cabinet 18”Subwoofer Frequency response 45Hz~20kHz (-10dB) 40Hz~150Hz(-10dB) Sensitivity(1W@1m) 100dB 97dB Nominal Impedance 4Ω 8Ω Power handling 800W (continuous), 3200W (peak) 600W(continuous), 2400W (peak) Crossoer 1.8kHz 150Hz LF 2x15" MF/LF / 75mm voice coil 18" / 100mm voice coil HF Ti/PEN composite membrane / 75mm voice coil / Coverage(HxV) 80°x60° / Max SPL 131dB 129dB Weight 54kg 46kg Dimension(WxHxD) 475x1060x444 (mm) 572x631x704.4 (mm)

P84 FPH Series Plastic Speaker

FPH12

FPH10

FPH15 PS0115S-G

P85 FPH Series Plastic Speaker

Instruction: FPH10 FPH professional active plastic speaker consist of three active models: FPH12 FPH15A , FPH12A and FPH10A. They both can equip a 15”subwoofer for FPH15 the extended low frequency. The FPH series are built by rugged and ultra-light gas-injected polypropylene enclosure. This elaborately design enclosure effectively avoid the forming of standing wave. The high quality woofer features high power and low distortion, the compression driver is made by a 44mm PEEK diaphragm. FPH series deliver clear, smooth sound. Its outstanding sound capability can be maximum performed under high dynamic condition. The high efficiency“CLASS-D”amplifier adopts switching mode power of wide- range voltage from 100V-240V, which make FPH much lighter than the “CLASS-D”amplifer but getting the equal sound. FPH is equipped with three handles, which is more convenient for carry.. FPH15\FPH12\FPH10 are same size’s passive version. The FPH is designed for meeting room, multi-function hall, music hall, hotel, coffee bar etc

Features: >High efficiency“CLASS-D”amplifier, high power, low distortion, excellent sound quality. >Switching mode power supply for light weight, accommodate wide-range voltage from 100V~240V. >Outstanding performance woofer produce high power, low distortion. >Constant directivity horn for even coverage. >Rugged and ultra-light gas-injected polypropylene enclosure >EQ BOOST to optimize the frequency response, compressor limit LED indication, over heat LED indication. >Multi-angle cabinet design make FPH can be used for stage monitor. >Three handles make the carry more convenient. >5xM10 suspension points for a quick and reliable installation. Can be pole mounted on a 35mm stand.

Model FPH10FPH12 FPH15 Type 10” 2-way Passive Speaker 12” 2-way Passive Speaker 15” 2-way Passive Speaker Frequency Response 65Hz~18kHz(±3dB) 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB) 55Hz~20kHz(-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) Sensitivity(1W@1m) 95dB 97dB 99dB Power Handling 250W (continuous), 1000W (peak) 400W (continuous), 1600W (peak) 400W (continuous), 1600W (peak) Coverage (HxV) 90°x60° 90°x60° 90°x60° Nominal Impedance 8Ω 8Ω 8Ω Crossover 2.2kHz 1.9kHz 1.9kHz LF 1X10”Woofer 1X12”Woofer 1X15”Woofer HF 1X 34mm HF Compression Driver (1”Exit) 1X 44mm HF Compression Driver (1”Exit) 1X 44mm HF Compression Driver (1”Exit) Max. SPL 125dB 129dB 131dB Input Connector/ Output Connector 2xSPEAKON 2xSPEAKON 2xSPEAKON Dimension (W x H x D) 335x545x319mm 390x630x360mm 450x710x370mm Net Weight 13kg 20kg 25kg

P86 FPH Series Plastic Speaker

FPH10A FPH12A FPH15A

Cutaway view

348 557

Model FPH10AFPH12A FPH15A

Type 10”2-way Active Speaker 12”2-way Active Speaker 15”2-way Active Speaker Frequency Response 65Hz~18kHz(±3dB) 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB) 55Hz~20kHz(-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) Input Sensitivity 0dBu 0dBu 0dBu Power Handling (RMS) 250W (LF) 500W (LF) 500W (LF) 70W (HF) 100W (HF) 100W (HF) Coverage (HxV ) 90°x60° 90°x60° 90°x60° Crossover 2.2kHz 1.8kHz 1.8kHz LF 1X10”Woofer 1X12”Woofer 1X15”Woofer HF 1X 34mm HF Compression Driver (1”Exit) 1X 44mm HF compression driver (1”Exit) 1X 44mm HF compression driver (1”Exit) Max. SPL 121dB 125dB 127dB Input Connector/ Output Connector Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR Dimension (W x H x D) 348x557x330mm 390x630x360mm 450x710x370mm Net Weight 14kg 20kg 26kg Rated Voltage AC 110/230V, 50-60Hz AC 100-240V/50-60Hz AC 100-240V/50-60Hz

P87 FPH Series Plastic Speaker

Instruction: FPH professional active plastic speaker consist of three active models: FPH10AU FPH15AU, FPH12AU and FPH10AU . They both can equip a 15” FPH12AU subwoofer for the extended low frequency. FPH15AU The FPH series are built by rugged and ultra-light gas-injected polypropylene enclosure. This elaborately design enclosure effectively avoid the forming of standing wave. The high quality woofer features high power and low distortion, the compression driver is made by a 44mm PEEK diaphragm. FPH series deliver clear, smooth sound. Its outstanding sound capability can be maximum performed under high dynamic condition. The high efficiency“CLASS-D”amplifier adopts switching mode power, which make FPH much lighter than the “CLASS-D”amplifer but getting the equal sound. MP3/Bluetooth is more convenient for signal transmission. FPH is equipped with three handles, which is more convenient for carry. The FPH is designed for meeting room, multi-function hall, music hall, hotel, coffee bar etc

Features: >High efficiency “CLASS-D”amplifier, high power, low distortion, excellent sound quality. >Switching mode power supply for light weight. >Outstanding performance woofer produce high power, low distortion. >Constant directivity horn for even coverage. >Rugged and ultra-light gas-injected polypropylene enclosure >EQ BOOST to optimize the frequency response, compressor limit LED indication, over heat LED indication. >MP3/Bluetooth is more convenient for signal transmission >Multi-angle cabinet design make FPH can be used for stage monitor. >Three handles make the carry more convenient. >5xM10 suspension points for a quick and reliable installation. Can be pole mounted on a 35mm stand.

Model FPH10AUFPH12AU FPH15AU Type 10” 2-way Active Speaker 12” 2-way Active Speaker 15” 2-way Active Speaker Frequency Response 70Hz~20kHz(±3dB) 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB) 60Hz~20kHz(-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) Input Sensitivity 0dBu 0dBu 0dBu Power Handling (RMS) 250W (LF) 500W (LF) 500W (LF) 70W (HF) 100W (HF) 100W (HF) Coverage (HxV ) 90°x60° 90°x60° 90°x60° Crossover 2.5 kHz 1.8kHz 1.8kHz LF 1X10” Woofer 1X12”Woofer 1X15”Woofer HF 1X 34mm HF compression driver (1”Exit) 1X 44mm HF compression driver (1”Exit) 1X 44mm HF compression driver (1”Exit) Max. SPL 121dB 125dB 127dB Input Connector/ Output Connector Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR Dimension (W x H x D) 348x557x330(mm) 390x630x360mm 450x710x370mm Net Weight 14kg 20kg 25kg Rated Voltage AC 110/230V,50-60Hz AC 110/230V,50-60Hz AC 110/230V,50-60Hz

P88 FPH Series Plastic Speaker

Instruction: FPH professional active plastic speaker consist of two active models: FPH10N FPH15AN and FPH12AN . They both can equip a 15”subwoofer for FPH12N the extended low frequency. FPH15N The FPH series are built by rugged and ultra-light gas-injected polypropylene enclosure. This elaborately design enclosure effectively avoid the forming of standing wave. It consists of 400W NdFeB Magnets LF paper cone speaker and NdFeB Magnets HF compression driver. FPH series deliver clear, smooth sound. FPH series deliver clear, smooth sound. Its outstanding sound capability can be maximum performed under high dynamic condition. The high efficiency“CLASS-D”amplifier adopts switching mode power of wide- range voltage from 100V-240V, which make FPH much lighter than the “CLASS-D”amplifer but getting the equal sound. FPH is equipped with three handles, which is more convenient for carry.. FPH15N&FPH12N are same size’s passive version. The FPH is designed for meeting room, multi-function hall, music hall, hotel, coffee bar etc

Cutaway view

Woofer FA1239G

Model FPH12N FPH15N Type 12” 2-way Passive Speaker 15” 2-way Passive Speaker Frequency Response 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) Sensitivity(1W@1m) 97dB 99dB Power Handling 400W (continuous), 1600W (peak) 400W (continuous), 1600W (peak) Coverage (HxV) 90°x60° 90°x60° Nominal Impedance 8Ω 8Ω Crossover 1.9kHz 1.5kHz LF 1X12”Woofer 1X15”Woofer HF 1X 44mm HF Compression Driver (1”Exit) 1X 75mm HF Compression Driver (1.4”Exit) Max. SPL 129dB 131dB Input Connector/ Output Connector 2xSPEAKON 2xSPEAKON Dimension (W x H x D) 390x630x360mm 450x710x370mm Net Weight 16kg 20kg

P89 FPH Series Plastic Speaker

FPH10AN FPH12AN FPH15AN FEATURES: >High efficiency“CLASS-D”amplifier, high power, low distortion, excellent sound quality. >Switching mode power supply for light weight, accommodate wide- range voltage from 100V~240V. >NdFeB Magnets tweeter, bass speaker, high sensitivity, high SPL, light weight. >Constant directivity horn for even coverage. >Rugged and ultra-light gas-injected polypropylene enclosure >EQ BOOST to optimize the frequency response, compressor limit LED indication, over heat LED indication. >Multi-angle cabinet design make FPH can be used for stage monitor. >Three handles make the carry more convenient. >5xM10 suspension points for a quick and reliable installation. Can be pole mounted on a 35mm stand.

Cutaway view

Woofer

FA1539G

Model FPH12AN FPH15AN

Type 12” 2-way Active Speaker 15” 2-way Active Speaker Frequency Response 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) Input Sensitivity 0dBu 0dBu Power Handling (RMS) 500W (LF) 500W (LF) 100W (HF) 100W (HF) Coverage (HxV ) 90°x60° 90°x60° Crossover 1.8kHz 1.5kHz LF 1X12” Woofer 1X15” Woofer HF 1X 44mm HF compression driver (1”Exit) 1X 75mm HF compression driver (1.4”Exit) Max. SPL 125dB 127dB Input Connector/ Output Connector Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR Dimension (W x H x D) 390x630x360mm 450x710x370mm Net Weight 17kg 21kg Rated Voltage AC 100-240V/50-60Hz AC 100-240V/50-60Hz

P90 FPH Series Plastic Speaker

PS0115S-G PS0115SA-G INTRODUCTION: PS0115SA-G, a subwoofer, can be used with FPH12A and FPH10A (full range) together as a set. It consists of a 15” cone loudspeaker and built-in power amplifier. Class H 600W, L/R signal input and output. Signal link or main loudspeaker output can be selected via a switch. Crossvoer can be 100Hz or 80Hz. The loudspeaker cabinet adopts 20mm HDF in slot structure to ensure pure, rich and transparent tone. 35mm mounting hole for convenient application. PS0115S-G is same size’s passive version.

FEATURES: > High effect “CLASS-H” PA, big power, small distortion and excellent sound quality. > Power switch design: light weight, stable performance, allow wide power input of 110V~230V. > L/R signal input and output. Signal link or main loudspeaker output can be selected via a switch. Crossvoer can be 100Hz or 80Hz. > Sub phase swicth with crossover o°or 180°.

APPLICATION: Be applicable for conference, multi-function hall, music hall, restaurant, and coffee house etc professional sound reinforcement locations. Also it is fit for family salon and family concert.

ModelPS0115SA-G Model PS0115S-G Type Subwoofer Type Subwoofer Frequency response 40Hz~100Hz(±3dB) Frequency response 40Hz~100Hz(±3dB) 35Hz~120Hz(-10dB) 35Hz~120Hz(-10dB) Input Sensitivity 0dBu Sensitivity(1W@1m) 98dB(1m/1w) Amp power rated 600W Power Handling 700W (continuous), 2800W (peak) Crossover 100Hz / 80Hz Nominal Impedance 8Ω LF 1X15”LF cone speaker /90mmvoice coil Crossover 100Hz / 80Hz Max. SPL 129dB LF 1X15”LF cone speaker /90mmvoice coil In/out connector 2XCOMBO JACK-XLR FEMALE / 4X XLR MALE Max. SPL 132dB Dimension(WxHxD) 500x590x610mm In/out connector 2xSPEAKON Net weight 46kg Dimension(WxHxD) 500x590x610mm Rated Voltage AC 110V/230V,50-60Hz Net weight 37kg Rated Voltage /

P91 FPD Series Plastic Speaker (Active&Passive)

INTRODUCTION: Features: FPD series plastic speaker cabinet consists of passive series > Plastic enclosure, high strength but light weighted. FPD10/FPD12/FPD15, and active series FPD10A/ FPD12A/ > High power and excellent tone tweeter and woofer. FPD15A/FPD10AU/FPD12AU/FPD15AU/FPD10AD/ > Active models feature dual power amplifiers, crossover, low FPD12AD/FPD15AD,which feature high performance and distortion, high performance, 3 band EQ, thermal/power surge/ low cost and can be used widely in various applications. short circuit/limit protection. > Passive models feature LC crossover, PTC/overload protection Applications: for reliable performance. Suitable for applications in multifunction hall, conference > Trapezoidal enclosure for monitoring application. room, concert hall, hotel, coffee bar, or touring show, family > Three handles and light weight for easy transportation. salon, etc; 35mm socket for pole mounting; five M10 flying points for suspension.

FPD10 FPD10A FPD10AU FPD12 FPD12A FPD12AU FPD15 FPD15A FPD15AU

P92P92 Passive Model FPD10 FPD12 FPD15 Type 10" 2 way passive full range loudspeaker 12" 2 way passive full range loudspeaker 15" 2 way passive full range loudspeaker

Frequency response(-10dB) 60Hz--20KHz 50Hz--20KHz 45Hz--20KHz Sensitivity (1m/1w) 94dB 96dB 97dB Impedance 8Ω 8Ω 8Ω Power handling 200W(Continuous),800W(Peak) 250W(Continuous),1000(Peak) 300W(Continuous),1200(Peak) Crossover 2.5kHz 2.0kHz 2.0kHz LF 10" woofer /50mm voice coil /200W 12" woofer/65mm voice coil /250W 15" woofer /65mm voice coil/300W HF 34mm compression driver/1" throat/30W 34mm compression driver/1" throat/30W 34mm compression driver/1" throat/30W Coverage(HxV) 90°x60° 90°x60° 90°x60° Max SPL 123dB 126dB 127dB Input connector 2×SPEAKON 2×SPEAKON 2×SPEAKON Hanging system 2×M10 5×M10 5×M10 Dimension(WxHxD) 335×545×319 (mm) 390×630×360 (mm) 450×710×370 (mm) Weight 13kg 17.2kg 20.4kg

Active Model FPD10A FPD12A FPD15A Type 10"two way active full range cabinet 12"two way active full range cabinet 15"two way active full range cabinet Frequency response(-10dB) 60Hz--20KHz 50Hz--20KHz 45Hz--20KHz Input Sensitivity (line) 0dBu 0dBu 0dBu Input Sensitivity (mic) -40dBu -40dBu -40dBu Max SPL(dB) 121dB 124dB 125dB AMP power 200W (LF)+50W (HF) 250W (LF)+60W (HF) 250W (LF)+60W (HF) LF 10"woofer/50mm voice coil/150W/8Ω 12"woofer/50mm voice coil/200W/8Ω 15"woofer/50mm voice coil/200W/8Ω HF 34mm compression driver/1"throat/30W 34mm compression driver/1"throat/30W 34mm compression driver/1"throat/30W Coverage(HxV) 90°x60° 90°x60° 90°x60° Crossover 2.5 kHz 2.0 kHz 2.0 kHz Input connector JACK/XLR JACK/XLR JACK/XLR Input voltage 115V / 230V 115V / 230V 115V / 230V Hanging system 2×M10 hanging points 5×M10 hanging points 5×M10 hanging points Dimension(WxHxD) 335×545×319 (mm) 390×630×360 (mm) 450×710×370 (mm) Weight 14kg 17kg 20.2kg

Active Model FPD10AU FPD12AU FPD15AU Type 10"two way active full range cabinet 12"two way active full range cabinet 15"two way active full range cabinet Frequency response(-10dB) 60Hz--20KHz 50Hz--20KHz 45Hz--20KHz Input Sensitivity (line) 0dBu 0dBu 0dBu Input Sensitivity (mic) -40dBu -40dBu -40dBu Max SPL(dB) 121dB 124dB 125dB AMP power 200W (LF)+50W (HF) 250W (LF)+60W (HF) 250W (LF)+60W (HF) LF 10"woofer/50mm voice coil/150W/8Ω 12"woofer/50mm voice coil/200W/8Ω 15"woofer/50mm voice coil/200W/8Ω HF 34mm compression driver/1"throat/30W 34mm compression driver/1"throat/30W 34mm compression driver/1"throat/30W Coverage(HxV) 90°x60° 90°x60° 90°x60° Crossover 2.5 kHz 2.0 kHz 2.0 kHz Input connector JACK/XLR JACK/XLR JACK/XLR MP3, SD card/USB interface MP3, SD card/USB interface MP3, SD card/USB interface Input voltage 115V / 230V 115V / 230V 115V / 230V Hanging system 2×M10 hanging points 5×M10 hanging points 5×M10 hanging points Dimension(WxHxD) 335×545×319 (mm) 390×630×360 (mm) 450×710×370 (mm) Weight 14kg 17kg 20.2kg

P93 FPD Series Active Plastic Speaker (DSP)

This knob adjusts volume normally. Press it to enter into menu FPD10AD to adjust function (4 tone modes/ 3 band EQ/low cut/delay, etc, FPD12AD diaplayed on LCD). after function adjustment, user can select FPD15AD EXIT to escape out from menu or it escapes out automatically after no operation.

Model FPD10AD FPD12AD FPD15AD type 10” 2 way active full range speaker cabinet 12” 2 way active full range speaker cabinet 15” 2 way active full range speaker cabinet frequency response(-10dB) 60Hz--20KHz 50Hz--20KHz 45Hz- 20KHz input sensitivity LINE 0 dBu 0 dBu 0 dBu MIC -40dBu -40dBu -40dBu max SPL(dB) 126dB 128dB 129dB amp power 350W (LF)+50W (HF) 350W (LF)+50W (HF) 350W (LF)+50W (HF) LF unit 10 inch LF/50mm voice coil/200W/8Ω 12 inch LF/50mm voice coil/200W/8Ω 15 inch LF/50mm voice coil/200W/8Ω HF unit 34mm compression driver/1inch throat/30W 34mm compression driver/1inch throat/30W 34mm compression driver/1 inch throat/30W coverage(V*H) 90°x60° 90°x60° 90° x60° crossover 2.4 kHz 2.4 kHz 2.4 kHz input connection 2×JACK/XLR+JACK-3.5 2×JACK/XLR+JACK-3.5 2 x JACK/XLR+JACK-3.5 DSP 4 tone mode selection,3 band EQ, low cut, delay, 4 tone mode selection,3 band EQ, low cut, 4 tone mode selection,3 band EQ, low cut, volume control delay, volume control delay, volume control input voltage 100V-240V(universal) 100V-240V(universal) 100V-240V(universal ) suspension 2×M10 5×M10 5xM10 dimension(W*H*D) 335×545×319 (mm) 390×630×360 (mm) 450 x 710 x 370 (mm) weight 14 kg 17Kg 20.2Kg

P94 KB Series Active Plastic Speaker

INTRODUCTION: “KB” plastic speaker is a portable and multi-purpose speaker. It adopts polypropylene engineering plastic cabinet of plastic injection moulding, high strength, light weight; special handle bars, is convenient for transiting; features asymmetrical external design, can be used as feedback speaker; HF & LF speaker of high performance , big power and sound quality; active part features high/low tone control, electrical active crossover, can trim tone flexibly and appropriately; D-class bass PA with switch power adds on tweeter PA that adopted integrated circuit, good performance, small distortion, soft & nature tone; features overheat, over current, short-circuit as well as autonomic compression protection when signal overdrives etc protections of high stability and high security, which can guarantee speaker’s normal working.

KB15 KB15A KB15AU KB15AW

KB10 KB12 KB10A KB12A KB10AU KB12AU KB10AW KB12AW

FEATURES: > Cabinet adopts high strength polypropylene engineering plastic of plastic injection moulding, good rigidity, light weight. > HF & LF speaker of high performance, big power and sound quality; > Special handle bars, is convenient for transiting; features asymmetrical external design, can be used as feedback speaker; > Features high/low tone control, electrical active crossover, can trim tone flexibly and appropriately. > D-class bass PA with switch power adds on tweeter PA that adopted integrated circuit, good performance, small distortion, soft & nature tone; > Features overheat, over current, short-circuit as well as autonomic compression protection when signal overdrives etc protections of high stability and high security, which can guarantee speaker’s normal working.

APPLICATION: Be applicable for conference room, multi-function hall, music hall etc medium & small size locations that require higher sound quality.

P95 KB Series Active Plastic Speaker

Instruction: KB series active loudspeaker is equipped with WIFI function which delivers better tone than that of Bluetooth and infrared, and can connect with cell phone or PC directly for convenient application. KB series is suitable for the reinforcement in multi-function hall, conference room, theater, etc.

Features: > High intensity but light weighted polypropylene enclosure > High quality speaker offers high power and splendid tone > Handle for convenient transportation; trapezoidal enclosure for monitoring; > High efficiency, low distortion, high cost performance ratio > Built-in WIFI function > HF/LF control, active crossover to fix the tone flexibly > Switching mode power supply Class D power amplifier, low distortion, natural tone KB10AW/KB10AU > Thermal/power surge/short circuit protection, and KB12AW/KB12AU automatic compression for over load signal to ensure reliable KB15AW/KB15AU performance; > 4*M10 flying points for suspension and ij35 hole for stand installation

Applications: suitable for the reinforcement in multi-function hall, conference room, theater, etc.

Model KB10AW/KB10AU KB12AW/KB12AU KB15AW/KB15AU Type 2-way Active Speaker 2-way Active Speaker 2-way Active Speaker Frequency response 60Hz -20kHz (-10dB) 55Hz -20kHz (-10dB) 50Hz -20kHz Input Sensitivity -10dBv(line) -10dBv(line) -10dBv(line) Rated Power 200W(LF)/50W(HF) 250W(LF)/70W(HF) 250W(LF)/70W(HF) Crossover 3000Hz 2800Hz 2200Hz LF 10" ĭ50mm Voice Coil 12" ĭ63.5mm Voice Coil 15" ĭ65mm Voice Coil HF ĭ34mm Voice Coil ĭ34mm Voice Coil ĭ34mm Voice Coil Coverage (HxV) 90°×60° 90°×60° 90°×60° Max SPL(@1m) 121dB 123dB 123dB Dimension (WxHxD) 345×530×310 (mm) 410×630×330 (mm) 495×720×365 (mm) Weight 16kg 17.2kg 25.5kg

P96 KB Series Active Plastic Speaker

KB10A KB12A KB15A

KB10A/KB12A/KB15A REAR PANEL

Cutaway view

Model KB10A KB12A KB15A Type 2-way Active Speaker 2-way Active Speaker 2-way Active Speaker Frequency Response 60Hz - 20kHz (-10dB) 55Hz - 20kHz(-10dB) 50Hz - 20kHz(-10dB) Input Sensitivity -10dBv (line), -42dBu (mic) -10dBv (line), -42dBu (mic) -10dBv (line), -42dBu (mic) Crossover 3kHz 2.8kHz 2.2kHz LF 10 "bass / 50mm voice coil 12 "bass / 65mm voice coil 15 "bass / 65mm voice coil HF AL film / 34mm voice coil AL film / 34mm voice coil AL film / 34mm voice coil Coverage(HxV) 90 °x60 ° 90 °x60 ° 90 °x60 ° Max. SPL 121dB 123dB 123dB Amp power 200W (LF) +50 W (HF) 250W (LF) +70 W (HF) 250W (LF) +70 W (HF) Dimension(WxHxD) 345x530x310mm 410x630x330mm 495x720x365mm Weight 16kg 17.2kg 25.5kg

P97 KB Series Passive Plastic Speaker

KB10 KB12 KB15

Cutaway view

Model KB10 KB12 KB15 Type 2-way Passive Speaker system 2-way Passive Speaker system 2-way Passive Speaker system Frequency response 60Hz-20kHz(-10dB) 55Hz-20kHz(-10dB) 45Hz-20kHz(-10dB) Sensitivity(1W@1m) 94dB 96dB 96dB Nominal Impedance 8Ω 8Ω 8Ω Power handling 200W (continuous), 800W (peak) 250W (continuous), 1000W (peak) 250W (continuous), 1000W (peak) Crossover 2.5kHz 2.2kHz 2kHz LF 10" LF /65mm voice coil (FB1043H) 12" LF /65mm voice coil (FB1243H) 15" LF /65mm voice coil(FB1543H) HF Ti Diaphragm /34mm voice coil (FE34B) Ti Diaphragm /34mm voice coil (FE34B) Ti Diaphragm /34mm voice coil (FE34B) Coverage(HxV) 90°x60° 90°x60° 90°x60° Max SPL 121dB 123dB 123dB Dimension(WxHxD) 345x530x310 (mm) 410x630x330 (mm) 495x720x365 (mm) Weight 12.7kg 16.5kg 20.5kg

P98 FT Series Coaxial Speaker

FT4 FT12 F10 F8 F6

FT4 Cutaway view

Model FT4 Type 4”Full range Frequency response 150Hz-12kHz (-10dB) Sensitivity(1W@1m) 90dB Nominal Impedance 8Ω Power handling 60W (continuous), 240W (peak) Crossover / Coverage (HxV) 60°X 60° Max.SPL 114dB Connection socket / Dimension (WxHxD) 238x288x216.3(mm) Weight 8kg

P99 FT Series Coaxial Speaker

FT10 FT6 FT12 FT8

Cutaway view

FT6 FT8

FT10 FT12

Model FT6 FT8 FT10 FT12 Type 2-way 6”Full range 2-way 8”Full range 2-way 10”Full range 2-way 12”Full range Frequency response 120Hz-18kHz (-10dB) 100Hz-18kHz (-10dB) 75Hz~18kHz(-10dB) 60Hz~18kHz(-10dB) Sensitivity(1W@1m) 90dB 92dB 94dB 96dB Nominal Impedance 8Ω 8Ω 8Ω 8Ω Power handling 100W (continuous), 400W (peak) 150W (continuous), 600W (peak) 200W (continuous), 800W (peak) 250W (continuous), 1000W (peak) Crossover 3.5kHz 3kHz 2.5kHz 2.2kHz Coverage (HxV) 60°X 60° 60°X 60° 60°X 60° 60°X 60° Max.SPL 116dB 120dB 123dB 126dB Connection socket 2XNL4MP 2XNL4MP 2XNL4MP 2XNL4MP Dimension (WxHxD) 238x288x216.3(mm) 270×245×310(mm) 297×270×374(mm) 341×311×447(mm) Weight 8.5kg 11.75kg 17.5kg 22kg

P100 MK Series Studio Monitor Speaker Series

INTRODUCTION: MK series is a newly developed monitor speaker with built-in class AB dual- CHANNEL amp, two-in and two-out 24-bit DSP processor, with gain, crossover, equalization, delay, compressor, scene memory and other functions so that it can ensure the sound Dynamic requirements and great resolution. Specific models include: full-range speakers: MK5/MK6/MK8, ultra-low speaker: MK10SA.

KM5B KM6B MK10SA KM8SA KM8B

MK5 MK6 MK8

ModelMK5 MK6 MK8 Model MK10SA Frequency Response 65Hz-20kHz (±3dB) 50Hz-20kHz (±3dB) 45Hz-20kHz (±3dB) Frequency response 35Hz-250Hz(±3dB) LF FH0501H-1 FH0601H-1 FH0801H-1 Impedance 4Ω HF FE2502G FE2502G FE2502G Max. SPL 110dB Amp power rated LF-50W LF-60W LF-90W Unit 10" LF HF-25W HF-30W HF-45W Amp power rated 100W Power Amp Distortion 0.05% @ 1kHz 0.05% @ 1kHz 0.05% @ 1kHz Music Power 200W Input connector Combo XLR + RCA Combo XLR + RCA Combo XLR + RCA Power AMP Distortion(T.H.D) 0.05% @ 1KHz Input Sensitivity 0dBV 0dBV 0dBV Connector 2*XLR IN + 2*XLR OUT Impedance 10kΩ 10kΩ 10kΩ Input Sensitivity Line: +4dBU Sensitivity 87dB /1m 88dB/1m 88dB /1m Nominal Impedance 10KΩ Max. SPL 107dB(Pair) 109dB(Pair) 111dB(Pair) Power Supply 220V/50Hz Crossover 2.2kHz 2.2kHz 1.9kHz Dimensions (WxHxD) 342x433x385mm Power Supply 220V 50Hz 220V 50Hz 220V 50Hz Dimensions (WxHxD) 208x321x217 mm 235x372x255mm 274x433x297mm Weight 7.2kg 10kg 14.5 kg

P101 PAP10D Portable Combo Speaker System with Built-in 8-channel Digital Mixer

Introduction As a new type of portable multifunction combo speaker system, PAP10D includes 1pcs active speaker cabinet, 1pcs 10’’ active cabinet with built-in removable 8-channel digital mixer. Combining special speaker stand, you can build a set of high performance professional speaker system, which is very suitable for the application in salon, wine party, band performance, outdoor dance, conference room and other venues.

FEATURES: > 10’’ two-way combo speaker system features excellent tone and light weight. The constant directivity horn-loaded tweeter AMPLIFIER can be used as either FOH or stage monitor. Rated Power 2*250W (THD‹1%,4Ω load at 1kHz) > Removable 8-channel digital mixer features easy use and THD ≤0.3%(1kHz) excellent performance and adopts the 4th-generation 40bit Frequency Response 20Hz--20kHz SHARC floating point processor, 24bit/192kHz ADC/DAC, 8 Voltage 100-240V/50-60Hz built-in effects(reverb, delay, modulation and GEQ), 8 LINE IN(6 Pro Mic and 1 Stereo), 8 busses(1 Stereo output), 4 assignable output and 2 USB interfaces(for recording, playback, scene REAR storage and wireless access). SPEAKER > High efficiency 2-channel “CLASS-D” amplifier(250W) Type 10" two way active speaker cabinet system features large power, low distortion and excellent tone. Frequency response 70Hz~20kHz(±3dB) 60Hz~20kHz(-10dB) > Designed with switching power supply featuring light weight, Sensitivity(1m/1W) 94dB stable performance and 100-240V wide voltage input. Max SPL(@1m) 122dB > Digital mixer offers USB2.0 dock for WIFI remote control by Speaker cabinet Nominal Impedance 4Ω iPad or Android device Power 200Wx2 > Digital network interface supports PC connection for visual LF speaker cabinet 1X10" woofer/50mm voice coil/200W operation. HF driver 1X 34mm HF dr iver/34mm voice coil /30W > 8 effect modules include 2 reverb, 2 modulation, 2 delay and Coverage(H*V) 90° x 60° 2 31-band GEQ to adjust tone flexibly and properly. Crossover 2.5kHz > Support USB recording/playback(wav). Connector JACK > Designed with high quality NEUTRIK components and 6 x Speaker cabinet dimension (W*H*D) 348x557x330(mm) Combo XLR. Speaker system net weight 32kg > Mixer features easy installation and co-use with special stand.

P102 8-channel Digital Mixers support wireless control via iPad or Android Tablet and wired access to a PC, and will support iPhone and Android Phone in October, 2018 as expected.

1. MIC IN 8. Function Selection and 2. MIC Gain LED 3. STEREO IN 9. Universal Knob 4. Output 10. PHONES 5. Network 11. Standby 6. MAINS IN 12. USB2.0 7. Channel Selection and LED 13. Headphone Level Knob

Features > PC/iPad/smartphone remote control > Multiple control via wireless network and Ethernet, compatible with iOS, Android, Windows, Mac OS and Linux device > Input channel supports phantom power, 4 band PEQ, high pass filter, compressor, effect and noise gate > Output channel supports reverb, delay and 8 built-in effects > 2 x USB(stereo recording/playback/system updates/scene storage) > Input: 6 Mic, 1 Stereo, 2 USB wireless Mic > 8 Busses: 1 Stereo output > 4 assignable output > High quality components: NEUTRIK > 8 built-in effects > Support scene memory

8-channel Digital Mixer

CHANNEL DESCRIPTION MIC IN 6 6 Combo XLR LINE IN 1 Stereo 2 Jack Master Out L/R Mono Busses 4 4 assignable output Stereo Busses 1 USB Interface USB recording/playback(wav) AD/DA Maximum 24Bit/192KHz Effect 8 effect modules: 2 reverb, 2 modulation, 2 delay and 2 31-band GEQ Network Wifi External Module Power Supply AC 90-240V 50/60Hz

P103 PAP12D/PAP15D Portable Combo Speaker System with Built-in 8-channel Digital Mixer

PAP15 PAP12 PAP18SA

Introduction This portable multifunction speaker combo includes two sets of speaker system - 12inch(digital mixer + passive speaker) and 15inch(professional power amplifier + passive speaker). Combining special speaker stand, you can build a set of high performance professional speaker system featuring perfect tone, light weight, easy operation and excellent performance.

Active Speaker System 1. High efficiency “Class-D” amplifier, large power, low distortion, excellent tone; 2. Dual channel design, perfect stereo effect, 100-240V wide voltage input; 3. Power: 2 x 250W/4Ω; 4. XLR input, 12V/4A power supply and external passive speaker interface.

Passive Speaker System 1. Cabinet made of high intensity plastic materials; 2. Subwoofer and tweeter designed with ferrite magnetic circuit, high sensitivity, low distortion, large power, high efficiency; 3. 3pcs handle for easy carry, light weight, elegant and attractive contour; 4. 45°trapezoid appearance design, can be used as stage monitor; 5. Support either pole mounting(35mm hole) or suspension(5pcs M10 suspension points) for installation.

Applications Very suitable for salon, wine party, band performance, outdoor dance, conference room and other venues.

P104 16-channel Digital Mixer

support wireless control via iPad or Android Tablet and wired access to a PC, and will support iPhone and Android Phone in October, 2018 as expected.

1. MIC IN 2. MIC Gain 3. STEREO IN 4. Output 5. Network 6. MAINS IN 7. Channel Selection and LED

Features > Speaker Cabinet with Built-in Mixer > PC/iPad/smartphone remote control; > Multiple control via wireless network and Ethernet, compatible with iOS, Android, Windows, Mac OS and Linux device; > Input channel supports pre-amp electro-gain, phantom power, 4 band PEQ, high pass filter, compressor, effect and noise gate; > Output channel supports reverb, delay and 8 built-in effects; > 2 x USB(stereo recording/playback/system updates/scene storage); > Input: 12 Mic, 2 Stereo; > 6 Busses: 4 AUX, 1Mix(L/R) > 6 assignable XLR output; > High quality components: NEUTRIK; > 4 built-in effects; > Support scene memory.

MIC IN 12 8 XLR, 4 Combo XLR stereo in 2 4 Jack Master Out L/R 6 assignable XLR output AUX 4 USB Interface USB recording/playback(wav) AD/DA Maximum 24Bit/192KHz Effect 4 effect modules: 2 reverb, 2 delay Network Wifi external module Power Supply External 12V DC(AC 90-240V 50/60Hz)power adapter

P105 Portable Combo Speaker System with Built-in 16-channel Digital Mixer

PAP12 PAP15

Model PAP12 PAP15 Type 12"two-way active full range speaker 15"two-way active full range speaker Frequency Response 50Hz--20kHz 45Hz--20kHz Sensitivity(1W@1m) 96dB 97dB Impedance(Ω) 4Ω 4Ω Rated Power(RMS) 200W 200W Maximum SPL(dB) 126dB 127dB LF Unit 12"subwoofer/50mm voice coil/200W/4Ω 15"subwoofer/50mm voice coil/200W/4Ω HF Unit ĭ34 compression driver/1"throat/30W ĭ34 compression driver/1"throat/30W Coverage(V*H) 90°x60° 90°x60° Crossover 2.2 kHz 2.4 kHz Suspension 5×M10 5×M10 Dimension(W*H*D) 390×630×360 (mm) 450×710×370 (mm)

18”active subwoofer

INTRODUCTION: PAP18SA, a subwoofer, can be used with PAP12 andPAP15 (full range) together as a set. It consists of a 18” cone loudspeaker and built-in power amplifier. Class H 750W, L/R signal input and output. Signal link or main loudspeaker output can be selected via a switch. Crossvoer can be 100Hz or 80Hz. The loudspeaker cabinet adopts 20mm HDF in slot structure to ensure pure, rich and transparent tone. 35mm mounting hole for convenient application.

Type 18” Subwoofer Frequency response(-10dB) 35Hz~100Hz Max SPL 128dB Crossover 80Hz/100Hz LF 18”/100mm Voice Coil Input connector JACK / XLR Input sensitivity 0dBu Power 750W Dimension(WxHxD) PAP18SA 568x627x710(mm) Weight 58.5kg

P106 Active Speaker : 1. High efficiency “Class-D” amplifier, large power, low distortion, excellent tone; 2. Dual channel design, perfect stereo effect, 100-240V wide voltage input; 3. Power: 2 x 250W/4ȍ; 4. XLR input, 12V/4A power supply and external passive speaker interface.

PAP12 REAR

P107 PSM Series Stereo Monitor Speaker System

PSM05E

PSM05R(Bluetooth/USB/REC) PSM05S PSM05e (Active) PSM05 (Passive)

Introduction: PSM05R/PSM05S Monitor Speaker features compact design, MIC stand integration system for use with stand and boom, 2x120W MP3 Player Class-D amplifier and high quality speaker unit. MIC1/LINE is designed Bluetooth with INSTRUMENT switch function and effects. Internal MP3/USB/ USB Player BLUETOOTH, USB recording/ folder read function(PSM05R only) Recorder Applications: Suitable for band show or solo performance.

FEATURES: echo effect > Internal 2x150W Class-D amplifier and high quality speaker unit > 2CH MIC/LINE, 1CH AUX IN, 3-band EQ (PSM05R is 2-band EQ) > MIC input has effects for option. > MIC1/LINE input with internal INSTRUMENT function for signal optimization. > 48V phantom power for use with condenser MIC. > MAIN IN and THRU function for option. > Wide power supply 100V-240V.

Model PSM05R PSM05S PSM05E Type 5” plastic monitor speaker 5” plastic monitor speaker 5” plastic monitor speaker Frequency response 60Hz –18kHz (-10dB) 60Hz –18kHz (-10dB) 60Hz –18kHz (-10dB) 90Hz –13kHz (-3dB) 90Hz –13kHz (-3dB) 90Hz –13kHz (-3dB) Power 60W(8Ω),120W(4Ω) 60W(8Ω),120W(4Ω) 60W(8Ω),120W(4Ω) Max SPL(1m) 115dB 115dB 115dB Audio inputs 3.5mm mini jacks -10dBu to +4dBu -10dBu to +4dBu / RCA jacks -10dBu to +4dBu -10dBu to +4dBu / XLR/TRS combo jacks -40dBu to +4dBu -40dBu to +4dBu 0dBu Phantom power +48V,switchable +48V,switchable / powersupply 100V-240V,50/60Hz 100V-240V,50/60Hz 100V-240V,50/60Hz Equalizer high >12KHz ±15dB >12KHz ±15dB / mid 2.5kHz±15dB / / low 100Hz±15dB 100Hz±15dB / USB/BLUETOOTH/REC Yes No No Dimension(W*H*D) 290*215*175(mm) 290*215*175(mm) 290*215*175(mm) weight 2.8kg 2.8kg 2kg

P108 PSM-R system Bluetooth/USB/REC PSM-R combination system includes PSM05R monitor speaker and PSM05 passive speaker, output power 2x120W/4Ω,BLUETOOTH/ USB/MP3 play function.

PSM05R(Active) PSM05 (Passive)

PSM05R(Rear) PSM05 (Rear)

PSM-S system PSM-S combination system includes PSM05S monitor speaker and PSM05 passive speaker, output power 2x120W/4Ω, suitable for solo performance and stage monitor.

PSM05S(Active) PSM05 (Passive)

PSM05S(Rear) PSM05 (Rear)

PSM-E system PSM-E combination system includes PSM05E monitor speaker and PSM05 passive speaker, output power 2x120W/4Ω, suitable for stage monitor and use with other pre-amp..

PSM05E(Active) PSM05 (Passive)

PSM05E(Rear) PSM05 (Rear)

P109 PSM Series Ultra-Compact 150-watt PA/Monitor Speaker System

Introduction: Multi-purpose, 150-Watt, active speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc.

FEATURES: >Revolutionary Class-D amplifier technology; >Ultra-low noise 3-channel mixer with 3-band EQ; >Mic stand integration system for use with stand and boom; >Internal switch-mode power supply for noise-free audio, superior >transient response and very low power consumption; >Add the echo effect for optimizing the Mic input; >Bluetooth for option; >USB recording/Playing function;(only PSMO5R) >USB record and select the files to play.(only PSMO5R)

PSM05A

Model PSM05A Type 5” plastic monitor speaker Frequency response 60Hz –18kHz (-10dB) 90Hz –13kHz (-3dB) Power 150W Max SPL(1m) 115dB Audio inputs 3.5mm mini jacks -10dBu to +4dBu RCA jacks -10dBu to +4dBu XLR/TRS combo jacks -40dBu to +4dBu Phantom power +48V,switchable powersupply 100V-240V,50/60Hz Equalizer high >12KHz ±15dB mid 2.5kHz±15dB low 100Hz±15dB USB/BLUETOOTH/REC / Dimension(W*H*D) 290*210*175 weight 2.8kg

P110 KG Series Recording Mixing Consoles

Introduction: New to the range for 2016 are our KG range of compact, high quality 16 programme DSP effects unit. and portable mixing consoles. Offering all the features and In addition to this, the KG models feature +48V phantom power specifications required from mixing consoles at this level, at on all mic channels, high quality 60mm smooth faders, and a a great price point. With features such as 3 band EQ, built-in robust quiet internal switchmode power supply. channel compression, DSP effects and a hugely versatile MP3/ USB/SD card playback and recording system. Features: Available in 5, 6, 8, 10 or 12 input models. The 5 input with 1 >1-8 channel input models mic channel, the 6 input with 2 mic channels, the 8 has 4 mic >3 Band EQ on all mic channels channels, the 10 with 6 mic channels, and the 12 input model >High pass filters and adjustable compressors on all mic has 8. All feature 2 stereo input channels. channels Input channels, are fully featured with 3 band EQ, 2 Auxiliaries, >USB/SD card recording / playback balanced mic/line connectors, compressor control and a useful >Bluetooth playback facility channel MUTE switch. Stereo channels differ only with 2 band EQ >High quality DSP effects and no compressor. >Ultra compact and lightweight design Main outputs are balanced XLR, with additional jack outputs available for auxiliaries and control room, and RCA phono record/ playback facilities. The USB/SD card facility for stereo recording / playback make the ideal for project home recording or giving the ability to supply SD interval / backing music to your live performance. To add further usb practicality to the unit, there is a built in MP3 player to give you every opportunity to make your live performance as quick and easy to set-up as possible.Also included on both KG models is a mode play stop loop backword forword

P111 Model KG05 KG06 KG08 KG10 KG12 Inputs 5 6 8 10 12 Mic Input channels 1 2 4 6 8 Stereo Input channels 2 2 2 2 2 Gain MIN - MAX MIN - MAX MIN - MAX MIN - MAX MIN - MAX Mic +6dB - +50dB +6dB - +50dB +6dB - +50dB +6dB - +50dB +6dB - +50dB Line +10dB - -34dB +10dB - -34dB +10dB - -34dB +10dB - -34dB +10dB - -34dB EIN -100dB -100dB -100dB -100dB -100dB Frequency response Mic Channel 10Hz - 20kHz +1/-3 10Hz - 20kHz +1/-3 10Hz - 20kHz +1/-3 10Hz - 20kHz +1/-3 10Hz - 20kHz +1/-3 THD Mic Channel ≤0.03% ≤0.03% ≤0.03% ≤0.03% ≤0.03% Signal to noise ratio 80dB 80dB 80dB 80dB 80dB Output Levels MAX +27(BAL) MAX +27(BAL) MAX +27(BAL) MAX +27(BAL) MAX +27(BAL) MAX +22(UNBAL) MAX +22(UNBAL) MAX +22(UNBAL) MAX +22(UNBAL) MAX +22(UNBAL) Channel EQ Hi 12kHz 12kHz 12kHz 12kHz 12kHz Mid 2.5kHz 2.5kHz 2.5kHz 2.5kHz 2.5kHz Lo 45Hz 45Hz 45Hz 45Hz 45Hz Lo Cut / 80Hz 80Hz 80Hz 80Hz MP3/USB/SD Audio YES YES YES YES YES playback USB/SD Audio recording YES YES YES YES YES DSP Effects NO YES YES YES YES CEHO Effects YES NO NO NO NO Power requirements 100V - 240V 100V - 240V 100V - 240V 100V - 240V 100V - 240V ~ Dimensions (W x H x D) 195x80x270(mm) 227x70x359(mm) 283x70x359(mm) 339x70x359(mm) 395x70x359(mm)

P112 Model KG16 Inputs 16 > KG series portable compact mixeroffers all the features and specifications Mic Input channels 12 required from mixing consoles at this level,but at a much greater price point. It Stereo Input channels 2 features 3-band EQ, built-in channel compression, DSP effects and versatile MP3/ Gain MIN - MAX USB/SD card playback and recording system. Mic +6dB - +50dB > Available in 5, 6, 8, 10, 12 and 16channel models. 5-channel mixerhas 1 Line +10dB - -34dB mic input; 6-channel onehas 2 mic inputs; 8-channel one has 4 mic inputs; EIN -100dB 10-channel onehas 6 mic inputs; 12-channel one has 8 mic inputs. All mixershave Frequency response 2 stereo inputs. Mic Channel 10Hz - 20kHz +1/- > Input channel features 3-band EQ, 2 aux inputs, balanced mic/line input, THD Mic Channel 3 compressor control and a useful channel mute switch. Stereo channel differs with Signal to noise ratio ≤0.03% only 2-band EQ and without compressor. Output Levels 80dB > Main outputis balanced XLR, additional jack output available for auxiliaries, MAX +27(BAL) control room and RCA recording/playback facilities. MAX +22(UNBAL) > USB/SD card stereo recording/playback makesKG series ideal for home Channel EQ recording or providing insulation/background music for your live performance. Hi 12kHz To add further practicality to the unit, there is a built-in MP3 player available to Mid 2.5kHz facilitate your live performance. Lo 45Hz > In addition, KG series features 16 kinds of high quality DSP effect units, Lo Cut 80Hz phantom power supply for mic channel, high quality 60mm smooth faders and MP3/USB/SD Audio YES switching mode power supply. playback YES > KG16 has added the new functions below: USB/SD Audio recording YES 1). Each channel adds monitor switch and LED, the DJ can manually detect the DSP Effects NO sound effect of each channel. CEHO Effects 100V - 240V ~ 2). DSP foot switch function. Power requirements 395x70x359(mm) 3). AUX2 function. Dimensions (W x H x D)

P113 MIX-C Series Mixing Console

MIX16C

The MIX-C compact mixingixing consoleconsole rangerange offeroffer aav versatileersatile and costcost effectiveeffective manmanyyd differentifferent appapplications.lications solution. Features Professional features such as 3-band swept EQ, 4 auxiliaries, high > 3 band with swept mid EQ on mic channels quality onboard DSP, 4 subgroups and USB connections. A 9-band > 4 band EQ on stereo channels graphic EQ on the output and balanced XLR output connections make > 9 band graphic equaliser these comprehensive and feature packed mixing consoles suitable for > Rackmountable model MIX08CG

MODEL MIX08CG MIX08C MIX12C MIX16C MIX20C Mic Input 6 6 10 14 18 Stereo Input 4 4 4 4 4 Aux 4 4 4 4 4 Dsp 100 programs 100 programs 100 programs 100 programs 100 programs MONO 1 1 1 1 1 Stereo L/R Output 2 2 2 2 2 Group L/R Output 4 4 4 4 4 Gain 70dB(MIC main output) MIC CH. EQ±15dB HI: 12kHz, MID:800-8kHz(optional), LO:80Hz LINE CH. EQ±15dB HI: 12kHz, HI MID:3kHz, LO MID:500Hz, LO:80Hz Frequency response (20-20kHz)±1dB Equivalent input noise -127(unweighted) Maximum Output Level +28dBu Meter 12segment(-30dB to 18dB) Distortion ≤0.01%(20-20KHz) Lamp / Weight (kg) 5.5kg 5.3kg 7.2kg 8.8kg 10kg Dimension(WxDxH)mm 482x445x105 430x445x105 535x445x105 645x445x105 732x445x105 *Only use a momentary type footswitch

P114 MIX-CA Series Powered Mixers

MIX16CA

The MIX-CA compact mixing console range offer a versatile and cost Features effective solution. > 3 band with swept mid EQ on mic channels Professional features such as 3-band swept EQ, 4 auxiliaries, > 4 band EQ on stereo channels high quality onboard DSP, 4 subgroups and USB connections. > 9 band graphic equaliser A 9-band graphic EQ on the output and balanced XLR output > Rackmountable model MIX08CGA connections make these comprehensive and feature packed > 2 X 300W class D amplifier MIX08CGA MIX08CA MIX12CA mixing consoles suitable for many different applications. MIX16CA

MIX08CGA MIX08CA MIX12CA MIX16CA Mic Input 6 6 10 14 Stereo AUX Input 4 4 4 4 Aux 4 4 4 4 DSP 100 programs 100 programs 100 programs 100 programs MONO / / / / Stereo L/R Output 2 2 2 2 Group L/R Output 4 4 4 4 Gain 70dB(MIC main output) MIC CH. EQ±15dB HI: 12kHz, MID:800-8KHz(optional), LO:80Hz LINE CH. EQ±15dB HI: 12kHz, HI MID:3kHz, LO MID:500Hz, LO:80Hz Frequency response (20-20KHz)±1dB Equivalent input noise -127(unweighted) Maximum Output Level +28dBu Meter 12segment(-30dB to 18dB) Distortion ≤0.01%(20-20kHz) Lamp / Weight(kg) 8.7kg 8.5kg 10.5kg 12kg Dimension(WxDxH)mm 482x445x150 430x445x150 535x445x150 645x445x150

*Only use a momentary type footswitch P115 MIX Series Mixing Console

MIX04AU

MIX02A

MIX02-1A

USB

MIX02-1A REAR PANEL MIX02A MIX04A MIX02AU REAR PANEL MIX04AU REAR PANEL

Features: > 2/4 Mic/line input, 48V phantom power, used for condenser microphone. > 4band LED level indicator > 2way stereo line input > Compact external structure;be applicable for different > 2 band EQ, +/-15dB EQ at 80Hz &12kHz locations; > Main output control (L/R) > Operation is friendly and easy; > Headphone output control > External power supply, (100-265V) can be used for any > RCA input/output > countries.

Model MIX02-1A MIX02A MIX02AU MIX04A MIX04AU

Mic Input 2 2 2 4 4 Stereo Input 1 2 2 2 2 Aux / 1 1 1 1 Dsp / / / / / MONO / / / / / Stereo L/R Output 1 2 2 2 2 Group L/R Output / / / / / Gain 65dB(MIC main output) MIC CH. EQ±15dB HI: 12kHz, LO:80Hz LINE CH. EQ±15dB HI: 12kHz, LO:80Hz Frequency response (20-20kHz)±1dB Equivalent input noise -103(unweighted) Maximum Output Level +20dBu Meter 4segment(-20dB to CLIP) Distortion ≤0.08%(20-20kHz) Lamp / / / / / Weight (kg) 0.54kg 0.78kg 0.78kg 0.98kg 0.98kg Dimension(W*D*H)mm 190x140x68 220x160x68 220x160x68 220x220x68 220x220x68

P116 AE414 Microphone & Power Amplifier Combined Equipment

AE414

Power amplifier part: Wireless Part: AE414 features high efficiency class D power amplifier, 4 Wireless section includes 4 UHF receiving units and 4 UHF transmitters which feature high S/N ratio, high anti- Ohms speaker cabinet with reliable performance, 2x500W interference, wide dynamic, stable frequency. output power, high efficiency, low distortion, high S/N ratio, There are 3 types of transmitters: handheld, bodypack and wide dynamic, perfect protections (thermal/short circuit/DC desktop for different applications. The handheld type can protections). be used in live show or Karaoke. The bodypack type can be packed in the waist and picks-up at the collar, and the actor’s hands are free to handle other things in the show. The desktop type can be used in the small conference. This equipment is designed with 4 receiving units and 4 Model AE414 wireless microphones for application. Frequency range 790~870 MHz Frequency stability ±0.005% Frequency response 50~18 kHz Receiving sentivity > -95 dBm Distortion < 0.8% at -90dBm Transmission power 10mW Configurations for selection: Input 4 CH MIC,4 CH LINE,1 group of RCA,1 MP3,USB and SD card interface Frequency response 20~20 kHz EQ HF ±15dB±2dB (10kHz) MF ±12dB±2dB (2kHz) LF ±15dB±2dB (50Hz) Sensitivity MIC -45dBu±2dB LINE -13.5dBu±2dB RCA -6.5dBu±2dB Mode Class D Rated power 2*500W 4 ohms stereo Protection short circuit/over load protection Cooling fan AABC S/N ratio > 70dB

P117 AE Series Cabinet Powered Mixers

Model AE42BEM Mic Input 4 LINE Input 4 Aux 1 Dsp 1(reverb) MONITOR / AE42BEM Stereo L/R Output / Power amp output(THD≤1%,RMS) 2x50W(4ohm)class AB AE42BEM Introduction: Gain 45dB(MIC main output) This product is the new version of AE42BE. DSP/MP3 player/ MIC CH. EQ±15dB HI: 10kHz, LO:100Hz USB/SD card/remote control have been added to the product. Frequency response (20-20kHz)±3dB Class AB 50Wx2 amplifier makes sound clear and full. Two passive S/N Ratio 70dB loudspeakers can be linked to the mixer for perfect stereo effect. Maximum Output Level 27dB AE42BEM features compact enclosure and comprehensive function. Meter / The product is the combination of mixer,player and reinforcement Distortion ≤0.5%(20-20kHz) system. Wireless / Features: Weight (kg) 9.2kg > compact but unique shape. Dimension(W×D×H)mm 480×160×130 > comprehensive function(mixer, power amplifier, MP3,SD card. > multiple input connectors to connect the audio source. > light weighted. > solid structure. Configurationguration of combined equipment and speakerspeake cabinet:

AE42-A AE42-B Configuration: Configuration: AE42BEM 1pcs, KB12 2 pcs, handheld wireless microphone AE42BEM 1pcs, KJ12-1 2pcs, handheld wireless microphone 2pcs, bodypack wireless microphone 2pcs. 2pcs, bodypack wireless microphone 2pcs;

Configurations for selection: Configurations for selection:

AABC ABCA

P118 DG Series Digital Amplifier with DSP

As the brand new flagship product, DG series digital power amplifiers adopt multi-loop regulating technique featuring high standard technical specifications. The specially-designed amplification technology can realize 95% efficiency and excellent stability even under low impedance and large current conditions; featuring active PFC and soft switching technology, with the optimized amplification design, the switching power supply can fit into harsh power grid environment and provides continuous power. DG series digital power amplifiers are equipped with high-quality DSP, high precision and dynamic AD/DA converter and 3.3” HD LCD screen; it can enforce real time monitoring via RS-485 and LCD panel and support receiving analog and AES digital audio signal.

Model DG2300 DG4200 DG4150 DG2200 DG2150 DG4100 DG2100 DG4065 DG2065 8Ω/Stereo 2×3000W 4×2000W 4×1500W 2×2000W 2×1500W 4×1000W 2×1000W 4×650W 2×650W 4Ω/Stereo 2×5100W 4×3400W 4×2550W 2×3400W 2×2550W 4×1700W 2×1700W 4×1100W 2×1100W Rated *2Ω/Stereo 2×7140W 4×4760W 4×4335W 2×4760W 2×4335W 4×2890W 2×2890W 4×1870W 2×1870W Power 16Ω/Bridge 1×6000W 2×4000W 2×3000W 1×4000W 1×3000W 2×2000W 1×2000W 2×1300W 1×1300W 8Ω/Bridge 1×10200W 2×6800W 2×5100W 1×6800W 1×5100W 2×3400W 1×3400W 2×2200W 1×2200W *4Ω/Bridge 1×14280W 2×11560W 2×8670W 1×11560W 1×8670W 2×5780W 1×5780W 2×3740W 1×3740W RMS Voltage 154.9V 126.5V 109.5V 126.5V 109.5V 89.4 V 89.4 V 72.1V 72.1V (THD=1%,1kHz) Rise Slope(1kHz, 50V/us bypass low pass filter)IMD-

SMPTE(10% rated 0.01% output, typical value)

DIM30(10% rated 0.01% output, typical value)

Crosstalk(under rated ≥90 dB power, 20 Hz ~1 kHz)

Frequency Response(10%

rated output, 8Ω, 20Hz~20 ±0.3dB kHz)

Input Impedance 20kΩ(bal) , 10kΩ (unbal) Damping ≥5000 (8Ω, 20Hz~200Hz)

S/N Ratio(A-weighted, ≥115dB ≥112dB ≥110dB ≥112dB ≥110dB ≥109dB ≥109dB ≥107dB ≥107dB 20Hz~20kHz)

Power Supply 90~260VAC,50~60 Hz

Protection Function Undervoltage, amplifier direct current, over heat, temperature control, overload control Dimension

(W×H×D) 483×44×465mm 483×44×370mm

N.W 13kg 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

P119 AQ Series Digital Power Amplifier

AQ2350

AQ4150

Introduction: Function AQ series digital power amplifier is suitable for demanding > stereo/mono/bridge operation modes; conference system, entertainment or small touring show. > sensitivity 1Vrms, gain 32dB, 26dB for This series digital power amplifier features perfect protection, option reliable performance, PFC and harmonic soft start switching > XLR input connector; mode power supply technology, 90~260VAC universal voltage. > professional speaker connector; > output over load/short circuit protection; > DC output protection; Features: > 70˫ power compression; > high efficiency, energy saving; > thermal protection; > active PFC, power factor 0.99 > Thermal indication; > high output to drive 2 Ohm load stably; > compact but solid structure; > perfect protection; > meet the requirement of production compliance and electromagnet compatibility. > Variable speed fan for cooling;

P120 MODEL AQ2150 AQ2250 AQ2350 AQ2450

8Ω/ stereo 2×150W 2×250W 2×350W 2×450W 4Ω/ stereo 2×255W 2×425W 2×595W 2×765W Rated power(EIAJ *2Ω/ stereo 2×435W 2×725W 2×1015W 2×1300W THD=1%,1kHz,2 CH 16Ω/ bridged 1×300W 1×500W 1×700W 1×900W working simultaneously) 8Ω/ bridged 1×510W 1×850W 1×1190W 1×1530W *4Ω/ bridged 1×870W 1×1450W 1×2030W 1×2600W RMS output voltage(THD=1%,1kHz) 34.6V 44.7V 52.9V 60.0V Slew rate( 1kHz, low-pass filter bypassed) 50V/us Sensitivity(Rated Power,1kHz) selectable 35dB, 32dB, 29dB, 26dB THD+N (10% rated output power) 0.02% 0.02% 0.02% 0.02% IMD-SMPTE(10% rated output power) 0.02% 0.02% 0.02% 0.02% DIM30(10% rated output power) 0.02% 0.02% 0.02% 0.02% Crosstalk rejection(less than rated power, ≥90 dB 20 Hz -1 kHz) Frequency response(10% rated output power, ±0.2dB 8Ω,20Hz - 20 kHz) Input impedance 20kΩ(bal) ,10kΩ(unbal) Damping factor(8Ω,20 Hz -100 Hz) ≥300

S/N ratio (A weighted,20Hz-20kHz) ≥105dB ≥104dB ≥103dB ≥100dB Power supply 90~260VAC, 50~60 Hz protection Protection:Under voltage, DC, Over temperature; Limiter: Over temperature,Over load, dimension(W×H×D) Short 483×44×370mm Net weight 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

MODEL AQ4150 AQ4250 AQ4350 AQ4450

8Ω/ stereo 4×150W 4×250W 4×350W 4×450W 4Ω/ stereo 4×255W 4×425W 4×595W 4×765W Rated power(EIAJ *2Ω/ stereo 4×435W 4×725W 4×1015W 4×1300W THD=1%,1kHz,2 CH 16Ω/ bridged 2×300W 2×500W 2×700W 2×900W working simultaneously) 8Ω/ bridged 2×510W 2×850W 2×1190W 2×1530W *4Ω/ bridged 2×870W 2×1450W 2×2030W 2×2600W RMS output voltage(THD=1%,1kHz) 34.6V 44.7V 52.9V 60.0V Slew rate( 1kHz, low-pass filter bypassed) 50V/us Sensitivity(Rated Power,1kHz) selectable 35dB, 32dB, 29dB, 26dB THD+N (10% rated output power) 0.02% 0.02% 0.02% 0.02% IMD-SMPTE(10% rated output power) 0.02% 0.02% 0.02% 0.02% DIM30(10% rated output power) 0.02% 0.02% 0.02% 0.02% Crosstalk rejection,less than rated power, ≥90 dB 20 Hz -1 kHz) Frequency response(10% rated output power, ±0.2dB 8Ω,20Hz - 20 kHz) Input impedance 20kΩ(bal) ,10kΩ(unbal) Damping factor(8Ω,20 Hz -100 Hz) ≥300

S/N ratio (A weighted,20Hz-20kHz) ≥105dB ≥104dB ≥103dB ≥100dB Power supply 90~260VAC, 50~60 Hz protection Protection:Under voltage, DC, Over temperature; Limiter: Over temperature,Over load, dimension(W×H×D) Short 483×44×370mm Net weight 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

P121 AG Series Digital Power Amplifier

Introduction: AG series digital power amplifier is our new flagship product which features multiple adjustment technology, over 95% efficiency and stable function in the low impedance and high current situation, active PFC and soft switching of the switching mode power supply, 90~260VAC universal power supply. AG series has 2 channel and 4 channel products. The high efficiency and reliable performance and the capacity to drive 2Ω load are suitable for line array system.

AG4150/AG2150

Features: Function: >high efficiency, energy saving; >stereo/parallel/bridge modes; >compact but solid structure; >gain option: 41dB 38dB 35dB 32dB >meet the requirement of production compliance and >output limit switch; electromagnet compatibility. >XLR balance input; >90VAC~260VAC universal power supply; >Paralleled professional speaker connector provides high current >premium components; operation; >variable speed fan for cooling; >Professional reliable 32A power socket >module design for convenient maintenance; >Thermal protection and indication; >2 channel and 4 channel design to suit for touring show; >Overload control offers continuous output; >Reliable performance; >DC output protection >low voltage protection; >Limit/problem indication;

P122 MODEL AG2300 AG4200 AG4150 AG2200 AG2150 8Ω/stereo 2×3000W 4×2000W 4×1500W 2×2000W 2×1500W Rated power(THD=1%, 4Ω/stereo 2×5100W 4×3400W 4×2550W 2×3400W 2×2550W continuous sine 1kHz *2Ω/stereo 2×7140W 4×4760W 4×3570W 2×4760W 2×3570W each channel working 16Ω/bridge 1×6000W 2×4000W 2×3000W 1×4000W 1×3000W simultaneously) 8Ω/bridge 1×10200W 2×6800W 2×5100W 1×6800W 1×5100W *4Ω/bridge 1×14280W 2×9520W 2×7140W 1×9520W 1×7140W RMS output voltage (THD=1%,1kHz) 154.9V 126.5V 109.5V 126.5V 109.5V Slope(1kHz, bypass LPF) 50V/us Sensitivity(Rated Power,1kHz) selectable 41dB, 38dB, 35dB, 32dB THD+N (10% rated output power) 0.01% IMD-SMPTE(10% rated output power) 0.01% DIM30(10% rated output power) 0.01% Crosstalk rejection(less than rated ≥90 dB power 20 Hz ~1 kHz) Frequency response(10% rated ±0.2dB output power 8Ω 20Hz~20 kHz) Input impedance 20kΩ(bal) ,10kΩ(unbal) Damping factor 8Ω 20Hz~200Hz) ≥300 S/N ratio (A weighted 20Hz~20kHz) ≥115dB ≥112dB ≥110dB ≥112dB ≥110dB Power supply 90~260VAC,50~60 Hz protection Protection:Under voltage, DC, Over temperature; Limiter: Over temperature,Over load, Short . Dimension (W×H×D) 483×44×465mm 483×44×370mm Net weight 12kg 9kg *Test condition: 20ms, 1KHz, THD+N=1%

MODEL AG4100 AG2100 AG4065 AG2065 8Ω/stereo 4×1000W 2×1000W 4×650W 2×650W Rated power(THD=1%, 4Ω/stereo 4×1700W 2×1700W 4×1100W 2×1100W continuous sine 1kHz,each *2Ω/stereo 4×2890W 2×2890W 4×1870W 2×1870W channel working 16Ω/bridge 2×2000W 1×2000W 2×1300W 1×1300W simultaneously) 8Ω/bridge 2×3400W 1×3400W 2×2200W 1×2200W *4Ω/bridge 2×5780W 1×5780W 2×3740W 1×3740W RMS output voltage (THD=1%,1kHz) 89.4V 89.4V 72.1V 72.1V Slope(1kHz, bypass LPF) 50V/us Sensitivity(Rated Power,1kHz) selectable 38dB, 35dB, 32dB, 29dB THD+N (10% rated output power) 0.01% IMD-SMPTE(10% rated output power) 0.01% DIM30(10% rated output power) 0.01% Crosstalk rejection(less than rated ≥90 dB power 20 Hz ~1 kHz) Frequency response(10% rated ±0.2dB output power 8Ω 20Hz~20 kHz) Input impedance 20kΩ(bal) ,10kΩ(unbal) Damping factor 8Ω 20Hz~200Hz) ≥300 S/N ratio (A weighted 20Hz~20kHz) ≥109dB ≥109dB ≥108dB ≥108dB Power supply 90~260VAC,50~60 Hz protection Protection:Under voltage, DC, Over temperature; Limiter: Over temperature,Over load, Short . Dimension (W×H×D) 483×44×370mm Net weight 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

P123 AK Series Network intelligent power amplifier(DSP)

Introduction: 1. Power Supply “AK” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core using cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and use high power tube as the full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load. Match the mega bass have enough energy to control paper cone. The presentation of good strength.

2. Amplifying Circuit “AK” intelligent amplifier can work long hours and under pressure with a loud voice power not smaller and it also won't appear overheating protection. Power amplifier inside there is a real time automatic detection of load impedance circuit. So when the load impedance is lower than the product of the preset value, detection circuit will call this information is sent to a gain of self-locking circuit. Circuit will make some corresponding adjustment, in does not affect the products under the premise of stable work, the output power will adjust according to the size of the load accordingly, so as to ensure the stability of the product, and doesn't affect the use of the load. “AK” intelligent power amplifier is not easy to overheating protection; the efficiency of the whole machine can reach 89 in 8 Ω conditions. So in normal use is not easy to appear the phenomenon of overheating protection. If due to environment or other reasons lead to rapid temperature rise of the power amplifier, at a certain temperature, the power amplifier within the sensor will automatically by the MCU to turn up the volume fell by 1 dB, at this time if the temperature continues to rise, the volume is automatically drop 1 dB, stop rising and start falling, if the temperature when dropped to a certain temperature, the volume is automatically increased, so far has been added to the initial value. And it has the very good music quality as class AB amplifier, and the efficiency of class D power amplifier.

3. Complete Appliance “AK” intelligent signal amplification signal processing of the power amplifier and power supply are interrelated. In power amplifier is started, the total control circuit can automatically detect the relevant circuit state, confirmed after each part of the circuit there is no problem to start work. In the process of work, each part of the circuit with MCU can own working state real time detection, and the data sent to the rest of the associated circuits. Other parts at the same time bring the MCU also in the working state of the field testing itself, and to send the information to the rest of the associated circuit, for mutual exchange. In the process of information exchange, if data change in one part of the circuit, then the other circuit will automatically make the corresponding adjustment, make the product stability and reliability to improve on an unprecedented scale.

4. Built-in high-performance DSP processor “AK” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter; Each channel has 5 parametric equalizer, all parameters are adjustable; Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe - sharp, beisaier, butterworth; Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval; Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate; 30 users memory, intuitive and friendly computer interface, RJ45 interface; Channel Copy function, convenient debugging and so on many merits.

P124 Model AKT700 AKT1000 AKT1600 AKT2400

Number of input channels 2 2 2 2 Number of output channels 2 2 2 2 RMS. Output Power(EIA (AC230V) 8 ohms ch. 700W 1000W 1600W 2400W 4 ohms ch. 1200W 1700W 2700W 3800W 2 ohms ch. 1200W 1700W 2700W 3800W 8 ohms bridged 2000W 2800W 4600W 6200W 4 ohms bridged 2000W 2800W 4600W 6200W Special function Built-in DSP processor YES YES YES YES The matrix of input signal NO NO NO NO PC Monitor YES YES YES YES Standby system YES YES YES YES Dimensions / Weight Dimensions (W/H/D) 483 mm*88 mm (2 U) *440 mm(Depth contains handle and the rear support) Weight 14kg 14kg 14.5kg 15 kg Appearance Black painted steel chassis with black painted steel/aluminum front

Model AKF700 AKF1000 AKF1600 Number of input channels 4 4 4 Number of output channels 4 4 4 RMS. Output Power(EIA (AC230V) 8 ohms ch. 700W 1000W 1600W 4 ohms ch. 1200W 1700W 2600W 2 ohms ch. 1200W 1700W 2600W 8 ohms bridged 2000W 2800W 4200W 4 ohms bridged 2000W 2800W 4200W Special function Built-in DSP processor YES YES YES The matrix of input signal YES YES YES PC Monitor YES YES YES Dimensions (W/H/D)(2 U) 483 mm*88 mm *475 mm Weight 16kg 16kg 18 kg Overall Efficiency & Input Characteristics

Overall Efficiency (8 ohms) 89% Inputs Sensitivity 0~20dB Inputs Impedance 30KOHM(balanced, stereo ) 15KOHM (unbalanced, parallel) Frequency response 20-20000Hz(±0.3dB) Slew rate >30V/us Damping factor 200-1000(tunableness) S/N(A weighted) >100dB Audio Performance THD+N 20Hz-20KHz for 1W <0.03% THD+N at 1KHz and 1dB below clipping <0.06% Frequency response (1W into 8 ohms,20Hz-20KHz) ±0.3dB Common Mode Rejection(CMR) 20 Hz ~ 1 KHZ >78dB Internal sample rate 96KHz Internal data path 32bit floating point Sample Rate Converters THD + Noise 0.003 %, 20 Hz - 20 KHz, unweighted Analog to Digital inputs THD + Noise 0.022 %,typical at 1kHz unweighted at +26dBu headroom setting

P125 EP Series Voltage Regulator

EP11

EP12

Features: > Voltage and current display on front panel b. Over current protection: If the overall output current is > Voltage convert switch to convert 230V or 240V on rear panel. When over 30A, it shuts down the outputs 230V is selected, the input voltage fluctuation range is 180-260V, c. Low voltage alarm: If the input AC voltage is lower than and output voltage is 230V. When 240V is selected, the input voltage 180V, the orange LED on the front panel lights up. fluctuation range is 190V-270V, and the output voltage is 240V. If the input voltage is over 275V, the regulator goes to protection status and shuts off output. > Advanced power surge protection > Line filtering with ultra-low noise Model EP11 EP12 > 10 output connectors, six 10A connectors (one group 4 and one Max current 30A 16A group 2) on the rear panel. Regulated voltage 180~250VAC/50Hz 180~250VAC/50Hz > The total load current is 30A Over voltage Protectoin 275±3VAC 275±3VAC > Protection: Power consumption 17W(idle) 17W (idle) a. Over voltage protection: if the input voltage is over 275V, it shuts Dimension 482.6x597x133.5mm 482 x 400 x 88mm down the outputs Weight 26kg 15kg

P126 AL Series Professional Power Amplifier

AL1200

Features: > Heatsink and variable speed fan for cooling modulation distortion > Loop transformer to offer sufficient power supply > Stereo/parallel/bridge mode > Perfect contour; standard rack mounting holes > Signal /clip LED for each channel > Limit/soft start/DC/short circuit/thermal protection > Gain control on front panel > Built-in limiter to prevent speaker from damage > SMD components for reliable performance > Prominent tone, signal conversion, extremely low THD/SMPTGE-IM/transient > Transistor connected with heatsink for cooling

MODEL AL400 AL700 AL1200 AL1600 AL2000

Output Power 8Ω 2x200W 2x350W 2x700W 2x800W 2x1000W Output Power 4Ω 2x300W 2x450W 2x990W 2x1250W 2x1350W Bridge Output power 8Ω 600W 900W 2×1980W 2550W 2700W Input Sensitivity 0.775V / 1.4V Frequency response(@1W) (20Hz-20KHz)±1dB S/N ratio (A weighted) >100dB THD(rated output power) <0.5% (20Hz-20kHz) Crosstalk A-weighted) ≥70dB Damp Factor(1kHz 8Ω) >200 >200 >200 >200 >200 Protection Audio Limiters,High Temperature,DC,Short Circuit,HF,Peak Current Limiters,Turn-on Delay Power Requirements 110~120@220~240AC 50/60Hz Weight 13kg 14.5kg 15g 15.8kg 18.5kg Dimension (W×H×D)mm 482x353x88 482x353x88 482x353x88 482x353x88 482x403x88

P127 AD Series Professional Power Amplifier

AD2200 AD4000

AD2200 Rear Panel

INTRODUCTION AD series features compact contour, perfect tone, excellent > Professional protection performance, unique circuit, high load capacity and perfect protection, > Dual side PCB and SMD to improve the stability; including DC/input limit/over-load output/short-circuit/thermal/power > Variable speed fan for cooling; surge/soft-start protection and limit/compression to ensure the reliable > Stereo/parallel/bridge mode performance. > Light weight for easy transportation

FEATURES APPLICATION > 2U/3U height, compact contour; Entertainment venue, stadium, touring show, theater, > Class AB&H circuit cinema, etc;

MODEL AD600 AD900 AD1500 AD2200 AD3000 AD4000 Stereo power 8Ω 2x200W 2x300W 2x500W 2x700W 2x1050W 2x1200W Stereo power 4Ω 2x300W 2x450W 2x750W 2x1100W 2x1500W 2x2000W Bridge power 8Ω 600W 900W 1500W 2200W 3000W 4000W Frequency response(@1W) 20Hz-20kHz ±0.5dB THD(rated output power) ≤0.05% ≤0.05% ≤0.05% ≤0.05% ≤0.05% ≤0.05% Damping factor (1kHz 8Ω) ≥200 ≥300 ≥300 ≥300 ≥300 ≥300 S/N ratio (A weighted) ≥100dB ≥100dB ≥100dB ≥100dB ≥100dB ≥100dB Input sensitivity 0dBu 0dBu 0dBu 0dBu 0dBu 0dBu Crosstalk (A weighted) ≤70dB ≤70dB ≤70dB ≤70dB ≤70dB ≥70dB Protection Limit/thermal/DC/short circuit/delay start protection Voltage AC230V/50Hz Dimension ((W×D×H)mm 483x320x88.8 483x320x88.8 483x320x88.8 483x380x88.8 483x495x133.3 483x495x133.3 Weight 14kg 16kg 17kg 21.5kg 31kg 38kg

P128 AE Series Professional Power Amplifier

AE900 AE1500 AE2200

AE3000 AE4000

Introduction AE series is the latestst SoundkSoundkinging amamplifiersplifiers , ccompactompact & solid >Professional pprotection:rotection: DC protection,protection short circuit protection, design, refined components,onents, perfectperfect tone, exceexcellentllent perperformance,formance, thermathermall pprotection,rotection, ooverver load proprotection,tection, CLIP/LIMIT protection unique circuit, power load to meet various professional requirement. >Variable speed fan for cooling, low noise; Protection circuit ensures safety and reliability. This series include >Stereo, mono, bridge mode for selection; AE900, AE1500, AE2200 and AE3000. Output power covers the >Low weight, convenient for installation and transportation range from 900W to 3000W. Applications Features Mainly used in large/medium sized application, e.g. stadium, >Standard 2U/3U height, compact and solid appearance; dancing hall, cinema, etc; >Class H circuit, low temperature, high efficiency, stable performance;

AE2200 Rear panel

MODEL AE900 AE1500 AE2200 AE3000 AE4000

Output Power 8Ω 2x300W 2x500W 2x700W 2x1000W 2x1200W Output Power 4Ω 2x450W 2x750W 2x1100W 2x1500W 2x2000W Bridge Output power 8Ω 900W 1500W 2200W 3000W 4000W

Input Sensitivity 1.4V/32dB/26dB Frequency Response (20Hz-20kHz)±0.5dB S/N Ratio(A-weighted) 100dB THD at rated output power <0.05%(MBW=80kHz,1kHz) Crosstalk (A-weighted) ≥70dB Damp Factor(1kHz 8Ω) >300 >300 >300 >300 >300 Protection Audio Limiters,High Temperature,DC,Short Circuit,HF,Peak Current Limiters,Turn-on Delay Power Requirements 110~120@220~240AC 50/60Hz Weight 16kg 17kg 21.5kg 31kg 38kg Dimension(W×D×H)mm 483x320x88 483x320x88 483x380x88 483x380x133.3 483x495x133.3

P129 AP Series Audio Processor

Introduction: AP24/AP36/AP48 features 2CH/3CH/4CH balanced input, 4CH/6CH/8CH balanced output, 24bit 48kHz sampling rate, ∑- AD/DA converter and 32bit DSP chip. Input section includes 8 processing units - gain, mute, noise gate, high cut, low cut, 8 PEQ, phase, delay; output section includes 7 processing units - crossover, 5 PEQ, gain, mute, limit, phase, delay; free matrix distribution between all inputs and outputs; crossover, gain and band width of all PEQ adjustable, type: peak, high shelving, low shelving; type of all high/low cut filter and crossover: Butterworth, Linkwitz-Riley, Bessel; -6dB/Oct to -48dB/Oct slope; threshold, ratio, start time and recovery time of all limiter/compressor continuously adjustable; threshold, start time and recovery time of all noise gate continuously adjustable; maximum 682ms delay time for all delay module, 0.021ms step; free copying of parameters between any channels; built-in signal generator with 32 presets; PC software control via USB or RS232; remote timing cascade control over as many as 256 units via RS485.

AP24/AP36/AP48

Features: > 2 x 4 digital matrix processor, 2CH bal input, 4CH bal output; > Maximum 682ms delay time for all delay module; 3 x 6 digital matrix processor, 3CH bal input, 6CH bal output; > Free copying of parameters between any channels; 4 x 8 digital matrix processor, 4CH bal input, 8CH bal output; > Built-in signal generator, pink/white noise output mode, 20Hz 24bit 48kHz sampling rate, ∑- ӛ AD/DA converter, 32bit DSP to 20kHz sine wave adjustable, signal amplitude adjustable; chip; > Input section includes 8 processing units - gain, mute, > 2x20 LCD screen, custom buttons with lamp, one button noise gate, high cut, low cut, 8 PEQ, phase, delay; operation, easy and fast; > Output section includes 7 processing units - crossover, 5 > 32 user presets, each preset saved or called alone, password PEQ, gain, mute, limit, phase, delay; protection supported; > Free matrix distribution between all inputs and outputs; > PC software remote control via USB or RS232; > Crossover, gain and band width of all PEQ adjustable, type: >Cascade control over as many as 256 units via RS485, remote peak, high shelving, low shelving; network control by center control system supported. > Type of all high/low cut filter and crossover: Butterworth, Linkwitz-Riley, Bessel, -6dB/Oct to -48dB/Oct slope, 20Hz~20kHz frequencies continuously adjustable; > Threshold, ratio, start time and recovery time of all limiter/ compressor continuously adjustable; > Threshold, start time and recovery time of all noise gate continuously adjustable;

P130 AP24 AP36 AP48 Input 2x XLR bal 3x XLR bal 4x XLR bal Output 4x XLR bal 6x XLR bal 8x XLR bal Impedance 1MΩ/stereo input, 500KΩ/mono input Max input level +12dBu CMRR >50dB (30Hz~20kHz) Output Impedance <500Ω, bal output Max input level +12dBu Frequency response 20Hz~20kHz,±0.5dB THD >110dBu Distortion <0.01% at 1kHz(-10dBu) Max delay 668ms Output gain -60dB~+12dB ±0.5dB Input gain -60dB~+12dB ±0.5dB PEQ 5 IN, 7OUT Filter Gain ±12dB in 0.5dB steps Center frequency 20Hz~20kHz Q value 0.4~128 Shelving filter frequency response Lo-shelf 19.7Hz~1kHz Hi-shelf 1kHz~20.6kHz Shelf gain ± 12dB in 0.5dB steps HPF&LPF Filter Frequency (high pass) <10Hz~16.0kHz Frequency (low pass) 35Hz~22.0kHz Response curve Butterworth 6dB 12dB 18dB 24dB Bessel 6dB 12dB 18dB 24dB Linkwitz-Riley 12dB 18dB 24dB Limiter Threshold (level) -90~+12dB Rise time 1~200ms Fall time 1~1000ms Power supply 90V-260V AC 50HZ

Cascade connection and data conversion diagram

Converter

P131 AP Series Audio Processor

AP88 AP88

Features: > 32bit DSP chip, 96kHz sampling rate, 24bit AD/DA converter; > Input section includes high cut, low cut, PEQ, noise gate, gain, mute, phase, linkage, volume group and other processing units; > Output section includes crossover, PEQ, gain, mute, limit, phase, delay, linkage, volume group and other processing units; > Gain, band width and frequency of all channels continuously adjustable, type: PEQ, low shelving filter, high shelving filter, low cut filter, high cut filter, first order phase shift, second order phase shift; > Free matrix distribution between all inputs and outputs, name of all channels changeable; > All input&output channels with independent phase curve adjustment, 180°/ 360° curve adjustment respectively for first/second order phase shift when it comes to PEQ type; > Type of all high/low cut filter and crossover: Butterworth, Linkwitz-Riley, Bessel; slope adjustable; > Threshold, start time and recovery time of noise gate continuously adjustable for input channel; threshold, ratio, start time and recovery time of compressor/limiter continuously adjustable for output channel; > Maximum 680ms delay time for each delay module of all output channels; > Free copying of parameters and linkage adjustable between any channels; > PEQ curve graph for all current input/output channels visible from any single input/output channel; > Built-in signal generator, pink/white noise output mode, 20Hz to 20kHz sine wave adjustable, signal amplitude adjustable; > Input&output level indicators and USB port at front panel, 232&485 and Ethernet port at rear panel, one button connection, easy and fast, wireless PC mixing supported; > 21 user presets, whole state and each preset saved or called alone. ID setting enables cascade control over as many as 256 units, password protection function for great security.

AP88 System specification Frequency response Dynamic range Distortion Crosstalk CMRR Input Type Max input level Impedance Output Type Max output level Impedance Digital Processing 24bit sigma-delta AD/DA converter 32 bit DSP, 48kHz sampling rate Display Lattice LCD to show current parameters and all the other settings Power Supply AC 95V-250V 50/60Hz Dimension 482*205*44mm Weight 2.88kg

P132 DP Series Audio Processor

DP24

DP24/DP26 is a cost effective 2 in 4 out/2 in 6 out digital audio processor. They aim to meet the requirements of middle and low budget market for the most suitable audio processing and field control. This processor includes 2 analog inputs and 4 analog outputs, a powerful M704 DSP and 24bit AD/DA converter, each channel featuring 11-band PEQ, gain control, noise gate, dynamic bass boost, RMS limiter, internal pink/white noise generator and adjustable delay. Each output provides maximum 7-band PEQ whose slope can reach as high as 48dB/Oct. Each output can select peak compressor, RMS limiter and delay. In addition, output channel 1 and output channel 3 are equipped with dynamic loudness filter. DP24 Analog input/output 2 x XLR bal/ 4 x XLR bal Min load 150 ohm THD+N 0.001% at 1kHz 0dBu S/N >106dBA Frequency response 20Hz - 20kHz; ±0.5Bu at 20Hz and 20kHz DSP M704, 24x32bit filter processing, 54bit accumulator register, 96bit precision intermediate data calculation PEQ 11-band EQ input; 7-band EQ output Filter gain -15dBu~+15dBu, step: 0.5dBu Input&output gain Input: -12dB~+12dB, step: 0.1dBu Output: -18dB~+12dB, step: 0.1dBu Center frequency 1Hz per step adjustment within 20Hz~20kHz Q value/broadband 0.4~128 High/low pass filter Butterworth slope: 6/12/18/24/36/48dB per octave Bessel slope: 12/24dB per octave Linkwitz-Riley slope: 12/24/36/48dB per octave Noise gate Threshold: -90dBu~-60dBu; control start time: 1ms~1,000ms; release time: 10ms~1,000ms RMS limiter Threshold: -14dBu~+16dBu, bypass adjustable ratio: 2:1~32:1; knee: 0~100% Fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s Peak compressor Threshold: -14dBu~+16dBu Control start time: 5ms~200ms; release time: 0.1s~3s Delay Max 900ms delay for each input; max 340ms delay for each output, 10.4us per step

DP26 Analog input/output 2 x XLR bal/ 6 x XLR bal Min load 150 ohm THD+N 0.001% at 1kHz 0dBu S/N >106dBA Frequency response 20Hz - 20kHz; ±0.5Bu at 20Hz and 20kHz DSP M704, 24x32bit filter processing, 54bit accumulator register, 96bit precision intermediate data calculation PEQ 11-band EQ input; 7-band EQ output Max 900ms delay for each input; max 340ms delay for each output Filter gain -12dBu~+12dBu, step: 0.5dBu Input&output gain Input: -12dB~+12dB, step: 0.1dBu Output: -18dB~+12dB, step: 0.1dBu Center frequency 1Hz per step adjustment within 20Hz~20kHz Q value/broadband 0.4~128 High/low pass filter Butterworth slope: 6/12/18/24dB per octave/ Bessel slope: 12/18/24dB per octave Linkwitz-Riley slope: 12/24/36/48dB per octave Noise gate Threshold: -90dBu~-60dBu; control start time: 1ms~1,000ms; release time: 10ms~1,000ms RMS limiter Threshold: -14dBu~+16dBu; bypass adjustable ratio: 2:1~32:1; knee: 0~100% Fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s Peak compressor Threshold: -14dBu~+16dBu Control start time: 5ms~200ms; release time: 0.1s~3s Delay Max 900ms delay for each input; max 340ms delay for each output P133 DP Series Audio Processor

DP44/DP48

DP44 is a high-end 4 in 4 out audio processor. 4 input level indicators comprise 5 level, 1 clip and 1 limit; 4 output level indicators comprise 5 level, 1 clip and 1 limit. This processor includes 24bit AD/DA converter that features 4 analog input, 1 stereo input and 4 analog output. The powerful M716 DSP manages analog output and can run as high as 96kHz process. This processor supports 2 different full matrix mixing modes: 1) input channel can mix output channel at any ratio; 2) each output channel can mix other output channel at any ratio.

DP48 is a cost effective 4 in 8 out digital audio processor, suitable for live show, fixed installation and many other applications. 4 analog input and 8 analog output are processed by the powerful M716 DSP. Besides the high performance 24bit AD/DA converter, each channel features 30-band PEQ, gain control, RMS limiter and adjustable delay. Each output provides maximum 7-band PEQ whose slope ranges from 6dB/ Octave to 48dB/Octave. Each output can select peak compressor and adjustable delay. In addition, high and low pass filter is also available.

DP44

Analog input 24 x XLR bal Analog output 4 x XLR bal Min load 150 ohm THD+N 0.001% at 1kHz 0dBu S/N >110dBA Frequency response 20Hz - 20kHz;-0.5dBu at 20Hz and 20kHz AD/DA converter 1×AK5388 24bit,2×AK4396 24bit-96kHz DSP M716, 24x32bit filter processing, 54bit accumulator register, 96bit precision intermediate data calculation PEQ 13-band EQ input; 11-band EQ output Filter type Each equalising filter can be set as Bell, Shelving, high/low pass, band pass, notch or all pass filter Filter gain -15dBu~+15dBu, step: 0.5dBu Center frequency 1Hz per step adjusting within 20Hz~20kHz Q value/band width Bell filter: 0.4~128, step: 100; Shelving/high/low pass filter:0.1~5.1, step:100; band pass/all pass/notch filter: 4~104, step:100 High/low pass filter Butterworth slope: 6/12/18/24/36/48dB per octave; Bessel slope: 12/24dB per octave; Linkwitz-Riley slope: 12/24/36/48dB per octave RMS limiter Threshold: 20dBu~-10dBu; adjustable ratio: 2:1~32:1; knee: 0~100% Fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s Delay 400ms, step: 21us

P134 DP48

Analog input 4 x XLR bal Analog output 8 x XLR bal Min load 150 ohm THD+N 0.001% at 1kHz 0dBu S/N >110dBA Frequency response 20Hz - 20kHz;-0.5dBu at 20Hz and 20kHz AD/DA converter CS42528 24bit -48kHz DSP M716, 24x32bit filter processing, 96bit precision intermediate data calculation PEQ 30 filters for input; 7 filters for output Filter type Bell, high/low Shelving, high/low pass, band pass, notch or all pass filter as optional Filter gain -15dBu~+15dBu, step: 0.5dBu Input&output gain -18dB~+12dB, step: 0.1dBu Center frequency 1Hz per step adjusting within 20Hz~20kHz Q value/band width Shelving/high/low pass filter: 0.1~5.1; Bell filter: 0.4~128 Band pass/all pass/notch filter: 4~104 High/low pass filter Butterworth slope: 6/12/18/24dB per octave; Bessel slope: 12/24/48dB per octave; Linkwitz-Riley slope: 12/24/48dB per octave Noise gate Threshold: -80dBu~-50dBu; control start time: 1ms~1,000ms; release time: 10ms~1,000ms RMS limiter Threshold: -14dBu~+16dBu; bypass adjustable ratio: 2:1~32:1; knee: 0~100%; fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s Peak compressor Threshold: -14dBu~+16dBu; bypass control start time: 1ms~900ms; release time: 0.1s~5s Input/output channel polarity Positive (0°)/negative (180°) as optional Input/output channel muting ON/OFF Delay Max 420.998ms delay for each input; max 128.998ms delay for each output

P135 DP88

DP88 supports 4 ways to realize remote control and network configuration. PC to single machine: connect a PC via USB, realize full control via PC software; PC to multimachine: connect a PC via RS485, realize full control via PC software; connect a wall controller via TCP/IP function, realize full control via PC software; connect a wall controller via RS485, realize simple control via wall controller. PC software can control all functions of the machine, including editing and uploading presets to the machine. 8 channels can all support line or mic in and distribute to 8 outputs via 8*8 matrix.

DP88 Analog input 8 bal Analog output 8 bal Max input level line:+18dBu; mic:-18dBu Max output level +18dBu THD+N 0.005% at 1kHz 0dBu S/N >104dBu Frequency response 20Hz - 20kHz±1dBu AD/DA converter 4×AK5385B 24bit 1×AK4358 24bit DSP Dream SAM3716, 24x32bit filter processing, 96bit precision intermediate data calculation Input EQ Each input channel has 3 Bell or Shelving filters Output EQ Each output channel has 5 Bell or Shelving filters Filter type Symmetric Bell or high/low Shelving to the second level command Filter gain Bell or Shelving gain: ±12dBu, step: 0.5dBu Center frequency 1/24th octave resolution per step within ±20Hz Q value/band width Q/BW range: 0.4/3.59~10/0.0312; Q/BW step: 0.1 res High/low pass filter The first level command (Butterworth -6dB/Oct) to the fourth level command (Butterworth, Linkwitz-Riley or Bessel -24dB/Oct RMS limiter Threshold: 18dBu~-12dBu Test time: 5ms~200ms (1ms res~20ms; 10ms res~100ms; 20ms~200ms) Release time: 0.1s~3s (0.1s res) Ratio: 1:1 (shoot through) ~32:1 (hard limiting), step: 0.1 Delay Max 380.998ms delay for each output, step: 21us Feedback activation Only available when selecting mic in Default parameter 6 user call; 4 S1-S4 digital input Front panel 2x24 LCD screen Each input has 6 indicators (line/mic/feedback/signal/clip/limit) 1 phantom power indicator 6 key switch potentiometer can control and edit each channel alone Type B USB connector Rear panel 2 x 12pin Phoenix connector (mic/line in) 2 x 12pin Phoenix connector (line out) 2 x 4pin Phoenix connector (S1-S4 digital input, level:0-5V) 2 x 4pin Phoenix connector (S1-S4 digital output, level:0-5V) 2 x RJ45-RS485 input/output seat 1 x RJ45- Internet seat (10/100 TCP-IP) AC supply IEC C13 16A, power socket: rocker switch 90-240V AC (50/60Hz) - 40W Dimension 482x44x229mm, 1U Net/gross weight 3.5/4kg

P136 SEQ Series Loudspeaker Controller

SEQ-1502 SEQ-3102 SEQ-3103

Introduction: Features The role of equalizer in a sound processing system can not be > Stable performance. underestimated. Different environment will definitely affect the > The excellency of ratio performance is well recognized in performance of a sound processing system . It is recommended that a domestic and overseas market. equalizer should be equipped in your system. SOUNDKING products > Compact and convenient. SEQ-3103 is your optimal choice. SEQ-3103 and SEQ-3102 are dual > CE & ETL certificated for safety. 31 segment graphic equalizer according to ISO 1/3 otc for its 20Hz- > Transformer balanced output. 20kHz frequency, SEQ-1502 is a dual 15 segment graphic equalizer Application according to ISO 1/3 otc for its 20Hz-20kHz frequency. Theater, disco, studio, concert, stage show, etc.

MODEL Central Frequency(Hz) Low Cut Filter Range (Optional) Weight

SEQ-1502 25, 40, 63, 100, 160, 250, 400, 630, 1k,1.6k, 2.5k, 4k, 6.3k, 10k, 16k, (Hz) 40Hz built in jumper (-12 ±6dB/±15dB (switchable) 2.5kg dB/oct) SEQ-3102 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, ±6dB/±15dB(switchable) 3kg 800,1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k,6.3k, 8k, 10k, 12.5k, 16k, 40Hz (-12 dB/oct) 20k(Hz)

SEQ-3103 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, ±6dB/±15dB(switchable) 4.0kg 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 12Hz-285Hz (-12 dB/oct) 20k(Hz)

MODEL Connector Power Consumption Dimension

SEQ-1502 XLR bal L/R, TRS 1/4” bal input L/R, XLR bal output L/R, TRS 1/4” bal output L/R 17W (AC100~240V, 50~60Hz) 433x183x44mm SEQ-3102 XLR bal L/R, TRS 1/4” bal input L/R, XLR bal output L/R, TRS 1/4” bal output L/R 17W (AC100~240V, 50~60Hz) 433x183x88mm SEQ-3103 XLR bal L/R, TRS 1/4” bal input L/R, XLR bal output L/R, TRS 1/4”bal output L/R 17W (AC100~240V, 50~60Hz) 433x183x132mm

P137 SPS Series Power Sequencer

SPS30

US Connerctor

EU Connerctor

Introduction SPS30 power sequencer adopts industrial SCM control, and the TMS telecommunication port uses industrial ARM from TI as the key part. The built-in filters offer pure power supply.

Features > 30A industrial input connector > Multifunction power socket > One key to turn on the sequence function > Turn on in turn and turn off conversely Model SPS30 > Each channel turns on/off independently Rated output current 30A > Input voltage display Max current out per CH 20A and 13A Power supply control 10 channel > Network control port Delay 2 seconds > 3U height for rack mounting Dimension 133x483x360(mm) > 10 channel outputs; channel status display on the front panel; Weight 11kg

P138 SPS Series Power Sequencer

SPS10F(American application)

Introduction SPS10F power sequencer adopts SCM control, starts each power supply in turns and turns off power supply conversely. It has digital display to indicate voltage and reduces instant current surge to secure the appliances 10 units at most can be connected and operated together. Application: Stereo appliance, computer, TV, broadcast system, etc..

SPS6-U (European application)

Introduction Features SPS6-U power sequencer adopts SCM control, starts each prevent the electrical facilities from the current surge in the circuit loop. power supply in turns and turns off power supply conversely. Application: It has digital display to indicate voltage and reduces instant Apply to stereo, Computer TV, Broadcast system or other electrical current surge to secure the appliances 6 units at most can be facilities which need sequence power driven system. connected and operated together. Offer 12V/1.2W lighting

MODEL Output Current Controlling Power Delay (each way power) Illuminance Power

SPS10F 15A 10 way 1 second 2×1.2W

SPS6-U 16A 6 way 1 second 2×1.2W

P139 AZ Series Power Sequencer

AZ-8F

AZ-8F Rear

Introduction This power sequencer features SCM smart control, turning on each channel power in order and turning off reversely one by one to reduce the transient power surge damage to the equipment, compact contour and reasonable topology (GZ-8F 2U, GZ-12F 3U), built-in premium filter to reduce the interference, multifunction power socket, digi-display of the voltage. The power sequencer compatible with TMS system has timing, tele-control, auto-control functions. The tele-control uses Ethernet structure and supports TCP Server, TCP Client operation modes.

Features Applications > Multifunction power socket; touring show, PC / TV / PA system, etc. > One button to turn on the sequence function; > Turn on in order and off reversely; > Each channel can be turned on/off independently; > GZ-8F provides 8 channel power outputs GZ-12F provides 12 channel power outputs, channel ;status displayed on the panel; > Input voltage display; > Network control connector; turning on/off via the TMS; > GZ-8F 2U, GZ-12F 3U

Model AZ-8F AZ-12F Power supply AC 220V/50Hz AC 220V/50Hz Total out current 30A 30A Each CH out current 13A 13A Power control 8 CH 12 CH Delay time 2s 2s DimensionDxWxH 88×483×260(mm) 132×483×260(mm) Weight 6.5kg 7.8kg

P140 PWB69 Digital Wireless Conference System

WDM69C WDM69D (Chairman) (Extension) P6U(active) P6(passive)

PWB69 is a digital wireless conferencing system. It consists of P6U, P6, WDM69D, WDM69C with the featuers, e.g. powerful and systematic function, convenient and easy operation for the applications in medium/small meeting.

FEATURES: > 2.4GHZ universal ISM frequency band meets CCC,CE,ROHS, FCC Packing List standard > Smart power supply: when the master power supply is turned off, the System configuration Model QTY other slave devices turn off automatically. Flat panel speaker cabinet (active) P6U 1pcs > Four channels can speak simultaneously (master and slaves). Unlimited Flat panel speaker cabinet (passive) P6 1pcs number of slaves Master WDM69C 1pcs > Conference mode: 1st in 1st out and apply for speaking Slave WDM69D 9pcs > Dual way transmission; recording output connector Speaker cable / 1pcs > Battery detection function: when the battery is low, the LED lights up. > ADFHSS technology; system encoded for confidentiality; Remote control / 1pcs > Digital frequency shift technology; strong capacity to prevent from Standard AI case / 1pcs feedback; round and stable tone; Charger CD69 1pcs

ALUMINUM CASE REMOTE CONTROL CHARGER (purchase additional cases for (feeds 12 microphones) Enterprise conference room or training room more slaves)

P141 WDM 69 Digital Wireless Conference System

WDM69C WDM69D (Chairman) (Extension)

WDM69M(Main transmitter/receiver)

FEATURES: 1. 2.4GHz universal ISM frequency band meets CCC,CE,ROHS, The advantage of digital transmission: FCC standard 1. Strong capability to prevent from interference; encoded signal 2. Smart power supply: when the master power supply is turned transmission for confidentiality; low noise; two times frequency of off, the other slave devices turn off automatically. the analog device; high S/N ratio; 3. Four channels can speak simultaneously (master and slaves). 2. Digital shift technology; Strong capability to prevent from Unlimited number of slaves feedback; round and stable sound; automatically adjusting the 4. Conference mode: 1st in 1st out and apply for speaking gain; better receiver dynamic; 5. Dual way transmission; recording output connector 3. Not interfered by mobile phone or router. 6. Battery detection function: when the battery is low, the LED 4. Universal 2.4GHZ frequency without law limitation unlimited lights up. number of slaves; Batteries feed the device up to 10 hours 7. ADFHSS technology; system encoded for confidentiality; continuously. One week standby time; 8. Digital frequency shift technology; strong capacity to prevent from feedback; round and stable tone;

Model WDM69

Carrier frequency band) 2.4GHz (2400-2830MHz) WDM69 Frequency response 20Hz-50kHz Standard Set List: Extend frequency mode ADFHSS Host: WDM69M x 1 Audio delay ≤ 15MS Chairman: WDM69C x 1 Receiving sensitivity -85 dBu Extension: WDM69D x 9 S/N ratio ≥ 110dB Aluminum-alloy Cabinet x 1 Dynamic range ≥ 110dB Charger: CD69 x 1 Distortion ≤ 0.6% Max out level 0dB(ij6.3 JACK OUT); 3dB(XLR OUT) Operation distance 25-30 m( indoors) Master/slave power supply 3.7V/1000mAH lithium battery Battery 10h Master power supply DC-12V/1A

P142 PLL UHF Wireless receiver Two Channel Wireless Micophone System

FEATURES: W96R 1.Built-in 2*1/4 antenna distribute internet and phantom power signal output , modularity automatic signal selection receiver . 2.Receiver and transmitter adopt industrial level TFT colorful OLED display screen . 3.Aluminum –alloy housing elaborate mechanical processing and surface treatment . 4.Shuttle button with menu operation setting 5.Real –time accurate battery display and under voltage warming will display on the receiver and transmitter 6.Adopts world-class top AF processing chip and high-end RF component which increased the system AF performance to be excellent and ensured the RF link to be reliable . 7.Eight numbers pilot frequency ID code .

SYSTEM: Operation range:50m line of sight Input impedance:38 dB Receiver AF response:50 Hz - 15 kHz RF output power :10 mW EIRP AF output level:Unbalanced+14dBu/ T.H.D:<1% (@AF 1 kHz, RF 46 dBu) Battery:Two AA (LR6) alkaline batteries Balanced +9dBu Dynamic range:>100 dB A-weighted Operation time:15 hours AF ouput impendance: Unbalanced810 Signal to Noise: >90 dB Handheld Transmitter Ohms/ Balanced 240 Ohms operation temperature:–10°C (14°F) to +60°C (+140°F) Output Gain Range: 28 dB Imagine rejection:-100 dBm / 30 dB sinad Pilot frequency:32.768KHz RF output power:10 mW EIRP Operation Voltage:15V Transmitter(Bodypack): Battery:Two AA (LR6) alkaline batteries Transmitter(Bodypack):Mini-XLR Operation time:10 hours Input:1MΩ

W95R/TH Handheld Microphone

FEATURES: 1. UHF dual channel true diversity, infrared frequency matching and pilot function(easy operation, no crosstalk); 2. Adjustable working distance(both receiver and transmitter designed with distance control key); 3. Noise free HiFi transmission circuit for clear sound and true reproduction; 4. 300 channels for option, as many as 100 sets for combo use at one place, perfect for KTV; 5. Receiver designed with multiple squelch control circuit to prevent external interfering signal; 6. Switching surge protection forsafety use of post-amp and speaker; 7. Effective working distance(unblocked): ≥200m. W95R/TH

P143 Single Channel Wireless Microphone

Active antenna distributor

Unidirectional Antennae Button

MAIN FEATURES: > Active antenna distributor design for many channel structure , up to 4 set distributors receiver the signal form a pair of antenna. Technical specification: > Built-in high frequency amplifier device without consumption during operation. Connector :BNC > The distributor can supply power for 4 set receiver and A pair of antenna Impedance :50Ω amplifier by BNC connector. Power supply :10-15V ,75mA > Antenna amplifier is compensate for the consumption of antenna cable length. Receiver mode (3dB wave width) 70angle > The power supply of W1000 , microphone receiver and amplifier all combine Three layer overload intercept point(OIP3) using one power adapter. :>30dBm > Combine two set W1000 can just using one pair of antenna together. Antenna gain :7.5dBi > One 19’flight case can mount 1set W1000 Signal gain ±1dB switchable +10dBi,0dBi

W89R/TH BODYPACK MICROPHONE

FEATURES: UHF true diversity twin receiving wireless mic, super strong receiving ability, more stable performance under complex conditions, two-color large screen with volume display both for receiver and mic, manual SET function key including scan, volume, lock/unlock. Infrared frequency matching and pilot(noise free), high-end and elegant double layer metal panel. Traditional digital pilot mode, 150 channels for option, regular 600-900 bands, as many as 20 sets for combo use, no crosstalk or drop, perfect for the application in school, all kinds of venue, etc; Elegant, ergonomic and comfortable holding transmitter, high-end metal enclosure, special strip-type switch key to avoid accidental power- off or muting, removable tail tube and concealed battery compartment, easy frequency adjusting and lock/unlock operation; Both receiver and mic designed with lock function to avoid mistake operation; Effective working distance(unblocked): ≥150m.

P144 P145