DOCSLIB.ORG

SOLBTX – Broadcast Transmitter COFDM – Video, Audio Telemetry and IP Products

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SOLBTX – Broadcast Transmitter COFDM – Video, Audio Telemetry and IP Products SOLBTX – Broadcast Transmitter COFDM – Video, Audio Telemetry and IP Products October 2012 Data Sheet The most important thing we build is trust The SOLO Broadcast Transmitter is a rugged Features: digital video transmitter, ideal for sports and news • Fully featured 8/7/6MHz demodulation link applications. A Cobham Tactical • SDI video input (optional) Communications and Surveillance product with • High quality video encoder Cobham technology at its core, it is small and low • Low delay powered enough to facilitate easy connection in • ASI input and output any broadcast application. • 100mW output power. The SOLO Broadcast Transmitter incorporates a high quality MPEG encoder, with a compliant DVB- T modulator and 100mW RF up-converter into a single low power consumption package. The unit is equipped with SDI (optional) and composite video interfaces, as well as ASI interfaces for easy connectivity to third party equipment. The Transmitter is ideal for use in locations such as stadiums and studios, or mounted in vehicles at sports events. Security of the transmission can be ensured using the optional embedded AES128/256 encryption. www.cobham.com/tcs SOLBTX – Broadcast Transmitter COFDM – Video, Audio Telemetry and IP Products October 2012 Data Sheet Specification: Input Control Video BNC Remote Control RS232 Control from PC GUI Stereo Balanced Audio 5 way OB Lemo Application RS232 Control 3 way OB Lemo Power 4 way OB Lemo Physical ASI In SMB Dimension L 102mm, W 71mm, H 30mm Weight Base Unit 350g Output RF Output SMA Power ASI Out SMB DC Input 6 to 16V Reverse Polarity Protected RF Power Consumption 4 to 5W depending on mode Frequency Bands 1000-1500MHz 1650-2500MHz Environment 3000-3700MHz Temperature Range -10 to +50 deg C Power 100mW Tuning Steps 250KHz Product Code: SOLBTX-100150 1000-1500MHz, PAL/NTSC Modulation SOLBTX-165250 1650-2500MHz, PAL/NTSC DVB-T Bandwidth 8/7/6MHz SOLBTX-300370 3000-3700MHz, PAL/NTSC DVB-T Guard 1/32, 1/16, 1/8, 1/4 TX-SDI Add SDI input DVB-T FEC 1/2, 2/3, 3/4, 5/6, 7/8 BTX-N Add 2.5MHz narrowband DVB-T Modulation QPSK, 16QAM, 64QAM BTX-UN Add 1.25MHz narrowband Sensitivity -95dB plus BTX-UXN Add 625KHz narrowband Video Line Standard PAL/NTSC Video Input Format SDI (optional) or Composite Resolution 720 (others selectable) Coding Mode MPEG Delay 80ms ASI Mode Byte mode Audio Input Balanced Audio (12dB clip) or MIC Level Sample Rate 48KHz Format MPEG Audio 384Kb/s to 64Kb/s mono or stereo Cobham Tactical Communications Cobham Tactical Communications Brazil Sales Office Singapore Sales Office and Surveillance International and Surveillance North America Av. das Nações Unidas 42 Toh Guan Road East Fusion 2,1100 Parkway 2303 Dulles Station, Suite 205 12551- 17ºandar - Sala 1725 Enterprise Hub 01-73 Whiteley, Hampshire Herndon, VA 04578-903 608583 PO15 7AB, UK 20171, USA São Paulo Singapore T: +44 1489 566 750 T: +1 571 392 2500 T: +55 11 3443 7545 T: +65 6515 8806 The information contained in this document is the property of Cobham Tactical Communications and Surveillance. This document and the information contained herein is provided for evaluation purposes only and is subject to change without notice. Cobham Tactical Communications and Surveillance assumes no www.cobham.com/tcs responsibility for errors that might appear in this document and gives no representations or warranties as to the accuracy of the information contained herein, including but not limited to the suitability and performances of the product or its intended application. © Copyright Cobham TCS limited 2012, All Rights Reserved .
Load more

Recommended publications
  • ETR 132 TECHNICAL August 1994 REPORT
    ETSI ETR 132 TECHNICAL August 1994 REPORT Source: EBU/ETSI JTC Reference: DTR/JTC-00011 ICS: 33.060 Key words: Broadcasting, FM, radio, transmitter, VHF European Broadcasting Union Union Européenne de Radio-Télévision EBU UER Radio broadcasting systems; Code of practice for site engineering Very High Frequency (VHF), frequency modulated, sound broadcasting transmitters ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [email protected] Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 1994. All rights reserved. New presentation - see History box © European Broadcasting Union 1994. All rights reserved. Page 2 ETR 132: August 1994 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to "ETSI Editing and Committee Support Dept." at the address shown on the title page. Page 3 ETR 132: August 1994 Contents Foreword .......................................................................................................................................................7 1 Scope
    [Show full text]
  • Essentials of Radio Wave Propagation
    This page intentionally left blank Essentials of Radio Wave Propagation If you need to maximise efficiency in wireless network planning an understanding of radio propagation issues is vital, and this quick reference guide is for you. Using real-world case studies, practical problems and minimum mathematics, the author explains simply and clearly how to predict signal strengths in a variety of situations. Fundamentals are explained in the context of their practical significance. Applications, including point-to-point radio links, broadcasting and earth–space communications, are thoroughly treated, and more sophisticated methods, which form the basis of software tools both for network planning and for spectrum management, are also described. For a rapid understanding of and insight into radio propagation, sufficient to enable you to undertake real-world engineering tasks, this concise book is an invaluable resource for network planners, hardware designers, spectrum managers, senior technical managers and policy makers who are either new to radio propagation or need a quick reference guide. christopher haslett is the Principal Propagation Adviser at Ofcom, the UK Communication Industries Regulator. As well as experience conducting and directing research projects, he has many years’ industrial radio-planning experience with Cable and Wireless plc., and as Director of Planning and Optimisation at Aircom International Ltd., where he directed the optimisa- tion of UMTS networks. He was also a Senior Lecturer at the University of Glamorgan. The Cambridge
    [Show full text]
  • TX1 FM Broadcast Transmitter
    TX1 FM Broadcast Transmitter Technical manual No part of this manual may be re-produced in any form without prior written permission from Broadcast Warehouse. The information and specifications contained in this document is subject to change at any time without notice. Copyright 2008 Broadcast Warehouse www.bwbroadcast.com WARNING This transmitter should never be operated without a suitable antenna or test dum- my load! Failure to observe this requirement may result in damage to the transmit- ter that is not covered by the warranty. IMPORTANT This transmitter has been shipped with the internal stereo generator enabled. The internal jumper J1 (MPX loop-through) is set to ON. If you intend to connect a MPX signal to the MPX input BNC connector you will need to move J1 (MPX loop-through) to the OFF position. Examples of configurations requiring setting J1 to OFF include: ● Routing the internal MPX signal through an external RDS encoder. ● Connecting an external audio processor or stereo generator to the transmitter. ● Connecting a re-broadcast or STL receiver to the transmitter. Consult the manual for further information on the transmitter’s jumpers and con- nections. CONTENTS 1. Introduction 1.1 TX FM Transmitter 1.2 Safety 1. Quick setups 1.4 Front And Rear Panels 1.5 Control And Monitor LCD 2. Installation And Setup 2.1 Frequency Setup 2.2 R.F. Power Setup 2. Alarms 2.4 RS22 Control & Monitoring 2.41 Windows remote control application 2.42 Terminal control of the transmitter 2.5 Modes Of Operation 2.51 A guide to the jumpers 2.52 Multiplex / Broadband Input 2.5 Stereo With Limiters 2.54 Stereo With Limiters Disabled 2.55 Mono From Two Channels 2.56 Mono From One Channel 2.6 Other Setup Considerations 3.
    [Show full text]
  • Free Tv Australia Operational Practice Op–71
    FREE TV AUSTRALIA OPERATIONAL PRACTICE OP–71 Recommended Settings of DVB-T Transmitter/Modulator’s Operating Parameters and Transport Stream SI for Use in Temporary Events or in TV distribution Systems Issue 1 December 2014 Page 1 of 14 1 SCOPE This Operational Practice provides advice and recommendations for the setting-up of commercial grade DVB-T transmitter/modulators for use in MATV distribution systems, or where permitted, a DVB-T terrestrial broadcast transmitter to be temporarily operated at low power at special events. Such units may include multiple program inputs, Standard and/or High Definition video MPEG-2 or MPEG-4 (H.264) encoding. The unit should also include a capacity to generate System Information signalling, multiplex (MUX) the various streams together and have a COFDM DVB-T modulator with an RF output. A simplified overview of the processes is included to give some understanding of the choices for setting modulation parameters and MPEG Transport Stream System Information so that an additional temporary transmission might operate compatibly in the presence of Australian free-to-air television signals and minimise RF interference or Service Information collisions with existing services. The digital formats and DVB-T transmission offers many operating choices. While such setup information is distributed in many standards documents, this Operational Practice aims to provide reasons for and best choice recommendations for use in Australian setups. At the rear of this document the reader will find the following summaries: Annex A – Summary of Recommended Settings. Annex B – Resulting bit-rate capacity for various modulator settings, Annex C – lists Australian RF Channel frequencies.
    [Show full text]
  • Dtv Implementation: a Case Study of Angola, Indiana
    DTV IMPLEMENTATION: A CASE STUDY OF ANGOLA, INDIANA Andrew Curtis Black A Thesis Submitted to the Graduate College of Bowling Green State University in partial fulfillment of the requirements for the degree of MASTER OF ARTS August 2014 Committee: Sandra Faulkner, Advisor Victoria Ekstrand Jim Foust Thomas Mascaro © 2014 Andrew Curtis Black All Rights Reserved iii ABSTRACT Sandra Faulkner, Advisor On June 12, 2011, the United States changed broadcast standards from analog to digital. This case study looked at Angola, Indiana, a rural community in Steuben County. The community saw a loss of television coverage after the transition. This study examined the literature that surrounded the digital television transition from the different stakeholders. Using as a framework law in action theory, the case study analyzed governmental documents, congressional hearings, and interviews with residents and broadcast professionals. It concluded that there was a lack of coverage, there is an underserved population, and there is a growing trend of consumers dropping cable and satellite service in the Angola area. iv Dedicated to Professor & Associate Dean Emeritus Arthur H. Black Dr. Jeffrey A. Black Coadyuvando El Presente, Formando El Porvenir v ACKNOWLEDGMENTS First and foremost, I would like to thank my family. To my parents whose endless love and support have surrounded my life. They believed, pushed, and provided for my success and loved, cared, and understood in my failures. I would like to thank my wife, Elizabeth, for putting up with me. The crazy hours, the extra jobs, the kitchen-less heat-less apartment, and all the sacrifices made so that I could pursue a dream.
    [Show full text]
  • Licensed Devices General Technical Requirements
    Licensed Devices General Technical Requirements (Detailed Update October 2005) Steven Dayhoff Federal Communications Commission Office of Engineering & Technology October, 2005 ¾TCB Workshop 1 Sessions for licensed devices intended to give an overview of FCC Processes & Rules, not to show limits for every type of device. The information covered is mainly related to equipment authorization of the transmitting equipment and not the licensing of the station. 1 Overview General Information How to find information at the FCC Creating a Grant Organizing a Report Licensed Device Checklist October, 2005 ¾TCB Workshop 2 This session will cover general information related to the FCC rules and technical requirements for licensed devices. Assumption is that everyone is familiar with testing equipment so test setup and equipment settings will not covered. The approval process for these types of equipment was previously called Type Acceptance or Notification. Now all methods of equipment approval are called Certification. This information generally applies to all Radio Service Rules for scopes B1 through B4. 2 General Information Understanding how FCC rules for licensed equipment are written and how FCC operates The FCC rules are Title 47 of the Code of Federal Regulations Part 2 of the FCC Rules covers general regulations & Filing procedures which apply to all other rule parts Technical standards for licensed equipment are found in the various radio service rule parts (e.g. Part 22, Part 24, Part 25, Part 80, and Part 90, etc.) All material covered in this training is either in these rules or based on these rules October, 2005 ¾TCB Workshop 3 There are about 15 different radio service rule Parts which require equipment to be authorized before an operators license can be obtained.
    [Show full text]
  • A Study of Future Spectrum Requirements for Terrestrial
    Technische Universität Braunschweig | Institut für Nachrichtentechnik Technische Universität Schleinitzstraße 22 | 38106 Braunschweig | Germany Braunschweig Institut für Nachrichtentechnik Schleinitzstraße 22 Federal Ministry of Economics and Technology 38106 Braunschweig Division I C 4 Germany Mr Baumeister Prof. Dr.-Ing. Thomas Kürner Prof. Dr.-Ing. Ulrich Reimers 53107 Bonn Tel. +49 (0) 531 391-2480 Fax +49 (0) 531 391-5192 [email protected] www.ifn.ing.tu-bs.de Date: 21 January 2013 A study of future spectrum requirements for terrestrial TV and mobile services and other radio applications in the 470-790 MHz frequency band, including an evaluation of the options for sharing frequency use from a number of socioeconomic and frequency technology perspectives, particularly in the 694-790 MHz frequency sub-band Final report Prof. Dr.-Ing. Thomas Kürner Prof. Dr.-Ing. Ulrich Reimers Dr.-Ing. Kin Lien Chee Dipl.-Ing. Thomas Jansen, M. Sc. Dipl.-Ing. Frieder Juretzek Dipl.-Ing. Peter Schlegel ii i On 27 August 2012, the Federal Ministry of Economics and Technology officially commissioned the Institut für Nachrichtentechnik (Institute for Communications Technology) at the Technische Universität Braunschweig with completing an expert study and analysis (Project code: 85/12) as titled above. This report presents the results of this study. Executive Summary During the World Radiocommunication Conference (WRC) in 2012, it was decided that one of the agenda items for WRC 2015 would focus on the possible future use of the frequency band 694 MHz to 790 MHz for mobile services. This expert report addresses this topic by initially analyzing the outlook for the terrestrial TV broadcasting that has occupied this frequency band to date.
    [Show full text]
  • Flexiva™ Compact Air-Cooled­ FM Analog/Digital Transmitter/ Exciter, Low Power ­- 50 W to 3.5 Kw
    Flexiva™ Compact Air -Cooled FM Analog/Digital Transmitter/ Exciter, Low Power - 50 W to 3.5 kW The Flexiva™ Compact air cooled FM solidstate transmitter family provides today’s broadcaster with a single transmission platform capable of analog and digital operation. Incorporating field proven GatesAir technology, Flexiva transmitters deliver worldclass performance, reliability and quality. Flexiva is designed for low- and high -power requirements, up to 80 kW, while utilizing the most compact design on the mar- ket today. Flexiva continues the legacy of the highly success- ful line of GatesAir FM transmitters and combines innovative, new quad -mode RF amplification and Product Features software-defined exciter technology to take FM transmission to the next Flexiva Compact FM Transmitter Family Fea- level. tures: ® Featuring PowerSmart technology, ■ Power levels up to 3850 W Analog FM, ■ Full remote control capability including: the Flexiva line offers unmatched 3100 W FM+HD ■ Web-based HTML GUI interface efficiency that makes it ideal for all Broadband, fequency agile design 87.5 FM applications. The 50 -volt LDMOS ■ ■ SNMP to 108 MHz requires no tuning or device technology delivers a dramat- Parallel control/monitoring adjustments ■ ic increase in power density, lower ■ Extensive Fault, Warning and operating costs and reduced cost of ■ Best- in- class power efficiency for Operational parameter logging ownership over the life of the trans- lowest operating costs mitter. ■ N+1, dual transmitter and main/ ■ Compact, space saving, 2, 3 or 4RU de- alternate; automatic switching sign As the digital transmission leader, capability GatesAir has developed a solid core ■ State -of-the- art, direct- to- carrier digi- ■ Optional Features competency backed by years of tal modulator ■ GPS receiver for SFN synchronization experience in the complex technical ■ Integrated stereo encoder areas that are essential for maximum ■ Orban Optimod™ 5500H multi-band ■ ITU -R BS412 peak program/multi- transmitter performance.
    [Show full text]
  • SOL7OBTX SOLO7 Outside Broadcast Transmitter
    SOL7OBTX SOLO7 Outside Broadcast Transmitter Overview: A compact and feature-rich COFDM digital video transmitter, specifically designed for high quality wireless link applications. With proven Domo COFDM and H.264 encoder technology at its core enabling High Definition images the small size and ultra low power consumption give maximum operational performance. Designed to offer maximum flexibility, the unit has a variety of video input options including composite, 3G-SDI and HDMI plus true balanced audio. The transmitter has an integrated control panel with sunlight- readable OLED display covering all major functions and has 16 user-defined presets. A wide range of swappable frequency bands are available from 200MHz to 8.9GHz. Integrated UHF band Camera Control is available as an option. Features and Benefits: Ultra-low latency High Profile H.264 SD and HD encoding Video formats up to 1080p60 and optional 4:2:2 Chroma sampling Industry standard DVB-T modulation for interoperability with existing systems Domo Broadcast UMVL modulation for enhanced high frequency / high speed performance Product Information: Controlled via USB or RS-232, and integrated sunlight- Product Includes readable OLED display CA0002 12V DC Power lead Lemo-wire 3m Designed for sports & events coverage, newsgathering CA0343 USB Control Cable and wireless studio camera applications CA0579 XLR Audio Input Cable Integrated camera control option with wide range of SA3688 OBTX Support USB Stick supported manufactures User swappable RF modules and battery plate options CCCAM Expansion Includes AP008822 1/4 Wave Antenna SMA 433MHz Very low power consumption for extended field performance: typically 10.0W CCCAM Expansion Requires Weighs between just 520g and 870g OBTX-CCCAM-ENABLE Enable Camera control RX upgrade OBTX-CCCAM-xUP At least one control Protocol and cable The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
    [Show full text]
  • Handbook on Digital Terrestrial Television Broadcasting Networks and Systems Implementation
    ITU-R 2016 Internati onal Telecommunicati on Handbook on Digital Terrestrial Union Place des Nati ons 1211 Geneva 20 Television Broadcasti ng Networks and Switzerland Systems Implementati on ISBN: 978-92-61-23481-2 Editi on of 2016 9 7 8 9 2 6 1 2 3 4 8 1 2 Printed in Switzerland REGU IO LA D T A I R O Geneva, 2016 N U S T Photo credits: Shutt erstock I A 1 9 0 1 6 N 6 - 2 0 Y N R I V E R S A Handbook on Digital Terrestrial Television Broadcasti ng Networks and Systems Implementati on Implementati Systems and Networks ng Broadcasti Television Terrestrial Handbook on Digital Handbook on Digital Terrestrial Television Broadcasting Networks and Systems Implementation Edition of 2016 ITU-R Handbook on Digital Terrestrial Television Broadcasting Networks and Systems Implementation iii Editors’ Foreword In 2002, ITU published its first Handbook on digital terrestrial television under the title Digital terrestrial television broadcasting in the VHF/UHF bands1 as guidance to engineers responsible for the implementation of digital terrestrial television broadcasting (DTTB). In this Handbook, new digital broadcasting technologies were explained in detail, for example a splendid description of the Discrete Cosine Transform (DCT) coding that is the basis of all past and present TV compression systems, as well as a very instructive chapter on signal power summation. Most of that content are not repeated in this new Handbook on Digital Terrestrial Television Broadcasting Networks and Systems Implementation. Therefore, the version 1.01, which was published by ITU in the year 2002, has not lost value and should still be consulted.
    [Show full text]
  • Broadcast Without Boundaries
    Issue 2 – February 2013 Broadcast Catalogue Broadcast without Boundaries www.cobham.com/tcs R0002 Welcome to the Cobham Broadcast catalogue. Cobham draws on the company’s cutting edge technologies to develop mission-critical products for the broadcast market which provide real technical and operational benefits to newsgathering, live production and other high profile applications empowering users to broadcast without boundaries. Backed by more than 50 years’ valuable experience of transmitting and receiving information in difficult electronic environments in the military and surveillance market, Cobham’s Broadcast portfolio benefits from the ultra-high build quality and ruggedness these products require. Introduction Why choose Cobham? Contents Cobham’s technical ability and capacity to develop new products is well ahead of the market. Its total control HD/SD Products Broadcast Camera Control Solutions over encoding and modulation processes and use of PRORXB – Broadcast Receiver Decoder 04 Camera Control Solution 09 FPGAs, rather than fixed ASICs, gives it a unique ability SOLO ENG H.264 COFDM Transmitter 04 to quickly add new features, improve performance and SOLO H.264 SD/HD COFDM Transmitter 04 Accessories and Amplifiers address customers’ specific requirements. Messenger 2 Transmitter Enhanced 04 SOLO – 1W Vehicle Amplifier 09 Messenger 2 Decoder HD/SD AVC/H264 05 FCON – Field Controller 10 Cobham’s HD broadcast systems employ next-generation Messenger 2 Transmitter – Camera Mount 05 SOLAMP 500W Booster 10 low-delay H.264 encoding. The increased encoding Very Efficient Power Amplifier (VEPA 2W) 10 efficiency this gives enables users to transmit at reduced SD Products Very Efficient Power Amplifier (VEPA 10W) 10 bit-rates with no loss in quality.
    [Show full text]
  • RURAL BROADBAND MOBILE COMMUNICATIONS: SPECTRUM OCCUPANCY and PROPAGATION MODELING in WESTERN MONTANA Erin Wiles Montana Tech
    Montana Tech Library Digital Commons @ Montana Tech Graduate Theses & Non-Theses Student Scholarship Spring 2017 RURAL BROADBAND MOBILE COMMUNICATIONS: SPECTRUM OCCUPANCY AND PROPAGATION MODELING IN WESTERN MONTANA Erin Wiles Montana Tech Follow this and additional works at: http://digitalcommons.mtech.edu/grad_rsch Part of the Electrical and Electronics Commons, Electromagnetics and Photonics Commons, and the Other Electrical and Computer Engineering Commons Recommended Citation Wiles, Erin, "RURAL BROADBAND MOBILE COMMUNICATIONS: SPECTRUM OCCUPANCY AND PROPAGATION MODELING IN WESTERN MONTANA" (2017). Graduate Theses & Non-Theses. 119. http://digitalcommons.mtech.edu/grad_rsch/119 This Thesis is brought to you for free and open access by the Student Scholarship at Digital Commons @ Montana Tech. It has been accepted for inclusion in Graduate Theses & Non-Theses by an authorized administrator of Digital Commons @ Montana Tech. For more information, please contact [email protected]. RURAL BROADBAND MOBILE COMMUNICATIONS: SPECTRUM OCCUPANCY AND PROPAGATION MODELING IN WESTERN MONTANA by Erin Wiles A thesis submitted in partial fulfillment of the requirements for the degree of Masters of Science Electrical Engineering Montana Tech 2017 ii Abstract Fixed and mobile spectrum monitoring stations were implemented to study the spectrum range from 174 to 1000 MHz in rural and remote locations within the mountains of western Montana, USA. The measurements show that the majority of this spectrum range is underused and suitable for spectrum sharing. This work identifies available channels of 5-MHz bandwidth to test a remote mobile broadband network. Both TV broadcast stations and a cellular base station were modelled to test signal propagation and interference scenarios. Keywords: spectrum monitoring, propagation modeling, spectrum management, mobile communication, remote mobile broadband, spectrum occupancy iii Dedication This work is dedicated to those who work hard and never give up.
    [Show full text]