Troubled Times: Energy
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
3 Solar Lanterns
Life Cycle Assessment of Off-Grid Lighting Applications: Kerosene vs. Solar Lanterns MASSACHUSETTS INSMThUTE by OF TECHNOLOGY Shreya H. Dave SEP 16 2009 LOBRARIES Submitted to the Department of Mechanical Engineering ARCHIVES in Partial Fulfillment of the Requirements of the the Degree of Bachelor of Science in Mechanical Engineering at the Massachusetts Institute of Technology June 2009 © 2009 Shreya H. Dave All rights reserved The author hereby grants to MIT permission to reproduce and to distribute publicly paper and electronic copies of this thesis document in whole or in part in any medium now known or hereafter created. Signature of Author Department of Mechanical Engineering May 13, 2009 Certified by \ V- Timothy Gutowski Professor of Mechanical Engineering Thesis Supervisor Accepted by N~) Professor J. Lienhard V. Collins Professor of Engineering Chairman, Undergraduate Thesis Committee Life Cycle Assessment of Off-Grid Lighting Applications: Kerosene vs. Solar Lanterns by Shreya H. Dave Submitted to the Department of Mechanical Engineering on May 13, 2009 in Partial Fulfillment of the Requirements for the Degree of Bachelor of Science in Mechanical Engineering ABSTRACT Access to electricity in developing countries is minimal and if available, often unreliable. As a result, fuel-based kerosene lighting is the most common solution to lighting necessities. However, kerosene combustion affects indoor air quality and relies on a non-renewable fossil fuel subject to price volatility. Thus, solar lanterns are being introduced to developing markets, but incur their own energy and emissions intensity from more complex manufacturing processes and requirements. Life cycle assessments examine the energy required and the emissions released over the entire existence of a product or process to allow for quantitative comparison among technology options. -
Produktkatalog Product Catalogue
Produktkatalog Product catalogue Über Petromax About Petromax Vor über 100 Jahren entwickelte der Berliner 100 years ago, Max Graetz, the technical Technikpionier Max Graetz die weltbekannte pioneer from Berlin, developed the world- Starklichtlampe! Die Marke Petromax, nach famous high-pressure lamp. The Petromax Graetzs Spitznamen „Petroleum Maxe“ be- brand, thus named after Graetz's nickname nannt, war geboren und mit ihr der Antrieb, "Petroleum Maxe", was born and with her mit innovativer Technik und Leidenschaft für the drive to bring independence into every- die Flamme Unabhängigkeit in den Alltag zu day life by means of innovative technology bringen. Auch heute steht dieser Gedanke and passion for the flame. Today this is still im Zentrum der Traditionsmarke. Die Faszi- the core concept of the traditional brand. nation Feuer inspiriert uns bei Petromax seit At Petromax the fascination for fire always jeher und der Funke ist auch auf die Themen inspires us, and the spark also flashed upon Draußen-Kochen und Draußen-Erlebnis über- the topics of outdoor cooking and outdoor gesprungen. experience. Feuerstellen unter freiem Himmel, nachhaltige Fireplaces under the open sky, sustainable Bekleidung für Draußen-Abenteuer, langlebi- clothing for the outdoor adventure, durable ge und belastbare Ausrüstung zum Kochen and resilient equipment for cooking and und Kühlen: Die Produktpalette von Petromax cooling: The Petromax product portfolio of- bietet dir eine große Auswahl, die dich dem fers you a large selection bringing you once ursprünglichen Erlebnis in der Natur wieder more closer to the original experience in na- näherbringt. Dabei steht die Qualität, Funk- ture. For that purpose, quality, functionality tionalität sowie die Kombinierbarkeit unserer as well as combinability of our products are Produkte im Vordergrund. -
Electric Light Pdf, Epub, Ebook
ELECTRIC LIGHT PDF, EPUB, EBOOK Seamus Heaney | 96 pages | 19 Mar 2001 | FABER & FABER | 9780571207985 | English | London, United Kingdom Electric Light PDF Book Tour EL: 5 min videos on each light type, followed by a 5 question quiz for each lamp type. Wednesday 17 June In , Thomas Edison began serious research into developing a practical incandescent lamp and on October 14, , Edison filed his first patent application for "Improvement In Electric Lights". Sunday 27 September Wednesday 29 July Wednesday 16 September View all albums. Saturday 10 October View all similar artists. In colder climates where heating and lighting is required during the cold and dark winter months, the heat byproduct has some value. Saturday 15 August Similar To Jeff Lynne. Tuesday 18 August Monday 25 May Wednesday 22 April Play album Buy Loading. Friday 24 April Wednesday 15 July Main article: Incandescent light bulb. Wednesday 14 October Help Learn to edit Community portal Recent changes Upload file. Features Exploring the local sounds and scenes at Noise Pop Fest. Due to the importance of this area of engineering we offer a full course of web pages, videos, and educational tools to communicate to you the world of of the electric light and the engineers and inventors who made it possible. Friday 31 July Monday 8 June Friday 21 August Sunday 18 October Friday 26 June The inside of the tubes are coated with phosphors that give off visible light when struck by ultraviolet photons. Friday 4 September Connect to Spotify Dismiss. Thursday 7 May Sunday 31 May Wednesday 1 July Tuesday 20 October The electric arc is struck by touching the rod tips then separating them. -
Portable Solar Street Lamp
PORTABLE SOLAR STREET LAMP ARIFFIN BIN ABDULLAH This thesis is submitted as partial fulfillment of the requirement for the award of the Bachelor Degree Electrical Engineering (Power System) Faculty of Electrical & Electronic Engineering Universiti Malaysia Pahang NOVEMBER, 2008 v ABSTRACT This system is designed for outdoor application in un-electrified remote rural areas. This system is an ideal application for campus and village street lighting. The system is provided with battery storage backup sufficient to operate the light for 10-11 hours daily. The project is about to develop and fabricate the circuit that can charge the lead acid battery during day time by using solar as the source. To control the circuit for charging, I have used the circuit charging that can implement the condition of the charging whether it’s in charging condition of in float condition. When charging condition, red LED will turn on until the battery reach the full charge state that is in floating condition and green LED will turn on. For the switching, I used PIC16F877A to switch on the lamp, by using the photocell sensor. The PIC16F877A will determine whether it is daytime or night time. The light will automatically on when the photocell sensor give the input to the PIC and PIC will give the output to the relay to switch on the light. To control the intensity of the light, we need the other input from the sensor. When sensor detect, PIC will give the output to switch on for the second light. So the intensity of the light will increase and the timing will start counter. -
The Invention of the Electric Light
The Invention of the Electric Light B. J. G. van der Kooij This case study is part of the research work in preparation for a doctorate-dissertation to be obtained from the University of Technology, Delft, The Netherlands (www.tudelft.nl). It is one of a series of case studies about “Innovation” under the title “The Invention Series”. About the text—This is a scholarly case study describing the historic developments that resulted in the steam engine. It is based on a large number of historic and contemporary sources. As we did not conduct any research into primary sources, we made use of the efforts of numerous others by citing them quite extensively to preserve the original character of their contributions. Where possible we identified the individual authors of the citations. As some are not identifiable, we identified the source of the text. Facts that are considered to be of a general character in the public domain are not cited. About the pictures—Many of the pictures used in this case study were found at websites accessed through the Internet. Where possible they were traced to their origins, which, when found, were indicated as the source. As most are out of copyright, we feel that the fair use we make of the pictures to illustrate the scholarly case is not an infringement of copyright. Copyright © 2015 B. J. G. van der Kooij Cover art is a line drawing of Edison’s incandescent lamp (US Patent № 223.898) and Jablochkoff’s arc lamp (US Patent № 190.864) (courtesy USPTO). Version 1.1 (April 2015) All rights reserved. -
Abstract Bright Beam in Front of a Locomotive
BRIGHT BEAM IN FRONT OF A LOCOMOTIVE (End. Beginning in a previous issue of World of Transport and Transportation Journal) Grigoriev, Nickolai D. – Ph.D. (Tech.), associate professor at the department of Electric engineering, metrology and power engineering of Moscow State University of Railway Engineering (MIIT), Moscow, Russia. Groups of such lamps could provide a more uniform light ABSTRACT distribution throughout the room than gas lamps and Pavel Yablochkov owns one of the most memorable arc lamp projectors. Moreover, price for it decreased pages in the history of world and domestic electrophys- rapidly. For example, during two years from March 1878 ics. In XIX century he became a holder of inventions and to March 1880 the price of the candle had fallen by 2 patents recognized by the entire civilized world of «Ya- times. blochkov candle» and ways to use the effect of «light French Patent № 120684, issued to inventor on the fragmentation» in the multi-element electric alternating 11th of October 1877 proposed capacitors as a stack current circuits, etc. Thanks to him, «Russian light» (block) of metal plates or strips of foil with insulating provided a vibrant nightlife to major European cities, layers (plates) located between them. They were rolled- gave electric lighting to ships and trains, other public up sheets of tin foil, separated by layers of plaster and infrastructure facilities. And at the same time the author gutta-percha (a natural waterproof insulation material, of the article highlights a dramatic fate of the scientist, the product of condensation or coalescence of colloidal early death, unfinished plans and projects. -
Xenon Arc Lamp
INSTRUMENTAL TECHNIQUE PRESENTATION Xenon arc lamp Madhuri Jash 01/08/2015 What is Xenon arc lamp? Xenon arc lamp is a gas discharge lamp where electric power is converted into light by an arc discharge in a xenon atmosphere at high pressure. Why we use xenon here because xenon has the highest overall conversion efficiency. History of arc lamp Carbon arc lamp was the first electric light invented by Humphry Davy in the early 1800s. This was the first widely-used and commercially successful form of electric lamp. 1875 Pavel Yablochkov had developed the Yablochkov Candle which was the first reliable carbon arc lamp and was used in Paris. 1870s-1890s Elihu Thomson and E.W. Rice Jr improved many parts of the arc light system both in DC and AC power. Then xenon short-arc lamps were invented in the 1940s in Germany and introduced in 1951 by Osram. First launched in the 2 kW size and now it is upto 15 kW. Xenon arc lamp construction .There is a fused quartz envelope with thoriated tungsten electrodes. Fused quartz is the only economically feasible material currently available that can withstand the high pressure. .the tungsten electrodes are welded to strips of pure molybdenum metal or Invar alloy, which are then melted into the quartz to form the envelope seal. .Because of the very high power levels involved, large lamps are water-cooled, An O- ring seals off the tube, so that the naked electrodes do not contact the water. .In order to achieve maximum efficiency, the xenon gas inside short-arc lamps is maintained at an extremely high pressure — up to 30 atmospheres — which poses safety concerns, large xenon short-arc lamps are normally shipped in protective shields. -
Download Catalog
Fall - Winter - 2021 Don’t Wait Until It Is Too Late! We just want to issue an availability warning. When the Colonial Pipeline hack occurred the sales of Jerry Cans went beserk! We sold every single can, regardless of size, within three days! (So did every other supplier). They were supposed to last us until late Fall. Now with Hurricane Ida, and the ensuing tornados and flooding in PA, NJ, and New York, we are getting deluged with orders once again. We have a container on the water, arriving mid-October, but there’s a hitch: the cost of shipping tripled! That will have to be reflected in the prices, obviously. Furthermore, the future prices look bleak. The cost of raw materials soared 27%, and that’ll make ‘em even more pricey on the next go-around! Therefore, we encourage you to stock up NOW, before you must pay a king’s ransom for these durable NATO Jerry Cans. 5 LITER CAN GP05 $49 10 LITER CAN GP10 $58 20 LITER CAN GP20 $65 SET OF 4 20 LITER CANS GP204 $239 GET YOUR SET OF 4 20 LITER CANS GP204 $239 Before It’s Issue 113 Too LATE! Issue 113 To Order Call: 800-225-9407 or Click: www.DeutscheOptik.com Satisfaction Guaranteed oy.., what a year so far! Lo- are short-handed, and like many prices have gone up a bit due to gistics have never been so other businesses can’t find any shipping and manufacturing costs, Bfouled up, not to mention more employees. The crew is (sheet steel sky-rocketed), we are the costs involved. -
Understanding the Economics Behind Off-Grid Lighting Products for Small Businesses in Kenya
UNDERSTANDING THE ECONOMICS BEHIND OFF-GRID LIGHTING PRODUCTS FOR SMALL BUSINESSES IN KENYA By Kristen Radecsky A Thesis Presented to The Faculty of Humboldt State University In Partial Fulfillment Of the Requirements for the Degree Master of Science In Environmental Systems: Energy, Environment, and Society Option May, 2009 UNDERSTANDING THE ECONOMICS BEHIND OFF-GRID LIGHTING PRODUCTS FOR SMALL BUSINESSES IN KENYA By Kristen Radecsky Approved by the Master's Thesis Committee: Dr. Arne Jacobson, Major Professor Date Dr. Charles Chamberlin, Committee Member Date Dr. Steven Hackett, Committee Member Date Dr. Christopher Dugaw, Graduate Coordinator Date Dr. Chris A. Hopper, Dean for Research and Graduate Studies Date ABSTRACT UNDERSTANDING THE ECONOMICS BEHIND OFF-GRID LIGHTING PRODUCTS FOR SMALL BUSINESSES IN KENYA Kristen Radecsky For illumination, many off-grid communities use lighting products such as candles, kerosene-fueled lamps, or dry cell battery-powered lights. Unfortunately, fuel- based and dry cell powered lighting can be expensive, a health hazard and often provides poor quality light. Manufacturers are currently designing rechargeable lighting products using LED technology as an alternative option for lower-income people. I developed a model to analyze the initial and life cycle costs of 19 off-grid lighting products. With the results, I make design recommendations for manufacturers. The analysis is based on product prices, laboratory measurements of product performance, and data about lighting cost and use patterns for small, off-grid businesses in Kenya. The field data were collected by Arne Jacobson, Maina Mumbi, Peter Johnstone and me during 2008. My results indicate that the economics of off-grid lighting using electric lamps depends on the charging mode. -
Financial Evaluation of SPV Lanterns for Rural Lighting in India
ELSEVIER Solar Energy Materials and Solar Ceils 44 (1996) 261-270 Financial evaluation of SPV lanterns for rural lighting in India Seemin Rubab, Tara Chandra Kandpal * Centre for Energy Studies, Indian Institute of Technology, Delhi Hauz, Khas, New Delhi 110 016, India Abstract Financial evaluation of solar photovoltaic (SPV) lanterns has been undertaken. The factors influencing the capital as well as the maintenance cost of SPV lantern have been analyzed. Cost per hour of illumination and cost per unit useful energy have been used for comparison of SPV lanterns with other options of rural domestic lighting. The benefits accrued to the user of an SPV lantern have been quantified in terms of the monetary worth of the conventional fuels being saved. Keywords: Solar photovoltaic lantern; Domestic lighting; Financial analysis I. Introduction The solar photovoltaic (SPV) lanterns are presently being promoted in India as a domestic lighting option for rural households with no direct access to grid electricity. In the past year several incentives have been introduced to motivate the potential users to purchase the SPV lantern. These include provision of direct subsidy and soft loan to the users [1,2]. The large scale acceptance of SPV lanterns in rural areas will depend upon a variety of socio-techno-economic factors. Since the initial cost of the SPV lantern is relatively very high as compared to other domestic lighting options, the financial viability of an investment on an SPV lantern would play a crucial role in its dissemination. A modest attempt to analyze and study some of the issues related to the financial viability of SPV lanterns is made in this paper. -
Chapter 2 Incandescent Light Bulb
Lamp Contents 1 Lamp (electrical component) 1 1.1 Types ................................................. 1 1.2 Uses other than illumination ...................................... 2 1.3 Lamp circuit symbols ......................................... 2 1.4 See also ................................................ 2 1.5 References ............................................... 2 2 Incandescent light bulb 3 2.1 History ................................................. 3 2.1.1 Early pre-commercial research ................................ 4 2.1.2 Commercialization ...................................... 5 2.2 Tungsten bulbs ............................................. 6 2.3 Efficacy, efficiency, and environmental impact ............................ 8 2.3.1 Cost of lighting ........................................ 9 2.3.2 Measures to ban use ...................................... 9 2.3.3 Efforts to improve efficiency ................................. 9 2.4 Construction .............................................. 10 2.4.1 Gas fill ............................................ 10 2.5 Manufacturing ............................................. 11 2.6 Filament ................................................ 12 2.6.1 Coiled coil filament ...................................... 12 2.6.2 Reducing filament evaporation ................................ 12 2.6.3 Bulb blackening ........................................ 13 2.6.4 Halogen lamps ........................................ 13 2.6.5 Incandescent arc lamps .................................... 14 2.7 Electrical -
The High Performance Home Manual
THE HIGH PERFORMANCE HOME MANUAL THE HIGH PERFORMANCE HOME MANUAL This document, along with the detailed drawings, is presented to offer our clients a roadmap in developing an "High Performance" home. This is not necessarily a "Green" home and does not take into consideration air-quality. It focuses on resource efficiency, energy efficiency, water conservation, and "providing for the future"; all of which are a part of a “green” home design, but not exhaustive. In some instances, we have provided “preferred” options as well as less costly means of attaining a near "High Performance" home. IMPORTANT: It is important to note that this information (these parameters) and the related detailed drawings are specifically for homes that are to be built in Southwest Texas (primarily the "hill country" type climate). The Climate Zone is three (3). Site Design Features: • Heat Mitigation: a. Shade hardscape (drives, walks, etc.) with shade trees or such. b. Utilize turf pavers for drive and/or walks, patios, etc. Resource Efficiency: • Drip edge (eaves and gables): a. Minimizes wicking and water distribution off roof material, decking, and fascia. • Roof Water Discharge: a. Provide gutters and downspout system with splash blocks (or such) to carry water a minimum of five feet from foundation (or utilize water harvesting system – see below). • Finish Grade: a. Provide a minimum fall of six inches for each ten feet from edge of building. • Flashing (galvanized metal): a. Flash roof valleys. b. Flash deck/balcony to building intersections. c. Flash at roof-to-wall intersections and roof-to-chimney intersections. d. Provide a drip cap above windows and doors that are not flashed or protected by coverings like pent roofs or are recessed in the exterior wall at least 24 inches.