DOCSLIB.ORG

Supplementary Data Bio-Oil Production Via Catalytic Microwave Pyrolysis of Model Municipal Solid Waste Component Mixtures

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Supplementary Data Bio-Oil Production Via Catalytic Microwave Pyrolysis of Model Municipal Solid Waste Component Mixtures Electronic Supplementary Material (ESI) for RSC Advances. This journal is © The Royal Society of Chemistry 2015 Supplementary Data Bio-oil Production via Catalytic Microwave Pyrolysis of Model Municipal Solid Waste Component Mixtures Dadi V. Suriapparaoa, R. Vinua,b,* a Department of Chemical Engineering, Indian Institute of Technology Madras, Chennai – 600036, India. b National Centre for Combustion Research and Development, Indian Institute of Technology Madras, Chennai-600036, India. * Corresponding Author. Phone: +91-44-22574187. E-mail: [email protected] (R.Vinu) 1 Figure S1. SEM micrographs of various susceptors. 2 Figure S2. Schematic of the microwave pyrolysis experimental set-up.21,24 3 2.5 Polypropylene Polyisoprene 2.0 Paraffin oil ) -1 Polyethylene glycol C o wt.% 1.5 ( 1.0 0.5 Differential mass loss loss mass Differential 0.0 200 250 300 350 400 450 500 550 600 Temperature (oC) Figure S3. Differential mass loss profiles of various polymers and paraffin oil. 4 600 500 400 C) o 300 Paraffin oil Cellulose 200 Temperature ( Temperature Garden waste Kitchen waste 100 0 0 2 4 6 8 10 12 14 16 Pyrolysis time (min) Figure S4. Temperature profiles achieved during the pyrolysis of individual MSW components at 450 W microwave power and 1:1 wt./wt. of feed:graphite. 5 30 600 CO 2 25 CO 500 20 400 C) o 15 300 10 200 Temperature ( Temperature Gas composition (vol.%) composition Gas 5 100 0 0 01234567891011 Pyrolysis time (min) Figure S5. Online analysis of CO and CO2 during microwave pyrolysis of 1:1 MSW- A:graphite. Compared to CO2, CO evolution was very low owing to the composition of the model MSW mixture. 6 Table S1. Composition of garnet, cement, fly ash, silica beads and TiO2. Garnet Composition (wt.%) Al2O3 1 SiO 43.16 Aeroxide® TiO 2 2 Composition (wt.%) P25** Fe2O3 32.17 TiO2 ≥ 99.50 MgO 9.13 Al2O3 ≤ 0.30 Al2O3 6.49 SiO2 ≤ 0.20 CaO 3.87 Fe2O3 ≤ 0.01 FeO 5.18 HCl ≤ 0.30 Cement Composition (wt.%) LOI* ≤ 2.0% Ca3Al2O6 9.87 Ca4Al2Fe2O10 8.34 *LOI - loss on ignitition Ca2SiO5 19.59 **Aeroxide® TiO2 P 25, Evonik Industries, 2007, Ca3SiO4 55.38 www.aerosil.com (accessed 20 Nov. 2014). Na2O & K2O 1.94 CaSO4.2H2O 4.88 Fly ash Composition (wt.%) SiO2 26.97 Fe2O3 4.77 CaO 17.85 MgO 2.00 Al2O3 10.34 Na2O 1.05 K2O 8.40 TiO2 0.70 LOI* 14.71% Silica beads Composition (wt.%) SiO2 69-71 CaO 8-9 Na2O 13 K2O 5 7 Table S2. Composition of bio-oil obtained by pyrolyzing paraffin oil with graphite at 1:1 (wt./wt.) on moisture free basis. Composition Product (area%) Alkanes 25.32 Heptane 2.70 Pentane, 3-ethyl-2-methyl- 1.63 Octane 4.04 Octane, 3-methyl- 1.18 Nonane 3.96 Decane 4.74 1,8-Dimethyl decane 1.36 Heptane, 3,4-dimethyl- 1.99 2,9-Dimethylundecane 1.20 Decane, 2,4,6-trimethyl- 1.06 Dodecane, 2,6,10-trimethyl- 0.90 Undecane, 3,4-dimethyl- 0.54 Cycloalkanes 5.46 Cyclohexane, methyl- 0.70 Cyclopentane, pentyl- 0.73 Cyclooctane, 1,2-dimethyl- 0.95 Cyclopropane, octyl- 1.40 Cyclopentane, 1,1,3-trimethyl- 1.01 Cyclopentane, decyl- 0.68 Alkenes 35.68 1,3,5-Hexatriene 1.16 1-Heptene 5.19 1-Heptene, 2-methyl- 2.22 1-Octene 2.93 1-Octene, 7-methyl- 0.63 1-Nonene 4.71 11-Tricosene 1.03 1-Decene 4.52 2-Dodecene 4.49 5-Dodecene 0.65 3-Dodecene 0.84 1-Octene, 3,7-dimethyl- 0.89 4-Tetradecene 2.15 1-Nonadecene 0.81 3-Eicosene 1.57 8 9-Octadecene 1.17 1-Nonadecene 0.74 Cycloalkenes 5.23 Cyclopentene, 4,4-dimethyl- 0.80 1,3-Cyclopentadiene, 1,2-dimethyl- 0.90 Cyclohexane, 2-propenyl- 1.30 Cyclohexane, 1,1-dimethyl-2-propyl 0.81 Cyclohexene, 1,6-dimethyl- 0.57 Cyclohexane, 1,2-dimethyl-3,5-bis(1-methylethenyl)- 0.85 Alkynes 7.33 5-Dodecyne 1.87 7-Tetradecyne 2.29 8-Hexadecyne 0.69 7-Hexadecyne 0.95 1-Hexadecyne 0.92 1-Pentadecyne 0.61 Single ring aromatic hydrocarbons 9.37 Benzene 3.12 Toluene 2.64 P-Xylene 2.97 Benzene, 1-ethyl-4-methyl- 0.63 Polycyclic aromatic hydrocarbons 3.10 Indene 2.35 Naphthalene, 1-methyl- 0.75 Total 91.49 Table S3. Composition of bio-oil obtained by pyrolyzing cellulose with graphite at 1:1 (wt./wt.) on moisture free basis. Composition Product (area%) Furan derivatives 9.60 Furfural 5.24 Ethanone, 1-(2-furanyl)- 1.31 Furanone, 5-methyl- 0.12 2-Furancarboxaldehyde, 5-methyl- (5-methyl furfural) 2.93 Phenolics 0.17 P-Cresol 0.10 Phenol, 2,4-dimethyl- 0.07 Alkanes 0.94 9 Tritetracontane 0.15 Hexadecane 0.79 Cycloalkanes 6.26 Cyclohexane, 1,1'-(1,2-dimethyl-1,2-ethanediyl)- 1.42 Cyclohexane, 1,2-dimethyl-3-pentyl-4-propyl 0.93 Cyclohexane, 2,4-diisopropyl-1,1-dimethyl- 0.82 Cyclotetracosane 0.50 Cyclohexane, 1,2,4,5-tetraethyl- 0.61 Cyclotetracosane 0.55 Cyclodocosane, ethyl- 1.43 Alkenes 10.57 1-Docosene 1.42 1-Nonadecene 2.84 5-Methyl-Z-5-docosene 0.43 1-Hexacosene 1.42 2,6,10,14-Tetramethyl-7-(3-methylpent-4-enylidene) pentadecane 4.46 Cycloalkenes 0.21 Cyclohexene, 4-(4-ethylcyclohexyl)-1-pentyl 0.21 Alkynes 0.70 8-Hexadecyne 0.70 Ketone derivatives 2.53 2-Propanone, 1-hydroxy- (Acetol) 0.36 Ethanone, 1-cyclopropyl- 0.09 3-Hexanone 0.51 3-Penten-2-one 0.20 Cyclopentanone 0.11 5,9-Dodecadien-2-one, 6,10-dimethyl 0.18 4-Cyclopentene-1,3-dione 0.22 1,2-Cyclopentanedione 0.09 2-Butanone, 1-(acetyloxy)- 0.10 2-Cyclopenten-1-one, 3-methyl- 0.28 Levoglucosenone 0.39 Alcohols derivates 11.65 1,2-Ethanediol, diacetate 0.43 2,6,10-Undecatrien-8-ol, 2,6-dimethyl 0.09 Octacosanol 0.47 Behenic alcohol 0.11 1-Heneicosanol 2.21 Tetracosanol 1.49 11,13-Dimethyl-12-tetradecen-1-ol acetate 0.61 14-Methyl-8-hexadecyn-1-ol 0.42 10 1-Heptacosanol 5.82 Aliphatic aldehydes/acids 0.92 2-Butenal 0.39 Nonahexacontanoic acid 0.53 Total 43.55 Table S4. Composition of bio-oil obtained by pyrolyzing garden waste with graphite at 1:1 (wt./wt.) on moisture free basis. Composition Product (area%) Furan derivatives 3.92 Furfural 3.10 3-Furanmethanol 0.15 Butyrolactone 0.09 2-Furancarboxaldehyde, 5-methyl- 0.10 Benzofuran, 2,3-dihydro- 0.48 Aromatics 1.03 Toluene 0.53 P-Xylene 0.34 Benzene, 1-ethenyl-2-methyl- 0.16 Condensed ring aromatics 0.71 Naphthalene 0.46 Naphthalene, 1,2,3,4-tetrahydro-5,6-dimethyl 0.08 Naphthalene, 2-methyl- 0.17 Phenolics 4.25 Phenol 0.89 P-Cresol 1.20 Phenol, 2-methoxy- 0.56 Phenol, 2,5-dimethyl- 0.18 Phenol, 4-ethyl- 0.14 Phenol, 2,4-dimethyl- 0.06 2-Methoxy-4-vinylphenol 0.75 3-Hydroxy-4-methoxybenzoic acid 0.23 P-tert-Butyl catechol 0.08 Phenol, 2,6-dimethoxy-4-(2-propenyl)- 0.16 Alkanes 0.00 Cycloalkanes 4.09 Cyclohexane, 1,2-dimethyl-3-pentyl-4-propyl- 4.09 Cycloalkenes 1.05 11 Cyclohexane, 1,1'-(1,2-dimethyl-1,2-ethanediyl)- 1.05 Alkenes 12.24 1-Hexacosene 2.77 12-Pentacosene 0.18 2,6,10,14-Tetramethyl-7-(3-methylpent-4-enylidene) pentadecane 9.29 Ketone derivatives 2.16 2-Propanone, 1-hydroxy- 1.03 3-Buten-2-one, 3-methyl- 0.09 3-Penten-2-one 0.10 Cyclopentanone 0.08 2-Propanone, 1-(acetyloxy)- 0.63 1,2-Cyclopentanedione 0.07 Bicycloheptane-2,5-dione, 1,7,7-trimethyl- 0.16 Alcohol derivatives 0.81 6-Octen-1-ol, 3,7-dimethyl-, acetate 0.16 Cycloheptanol, 2-methylene 0.65 Other oxygenates 1.57 Acetic acid 0.24 Propanoic acid, 2-oxo-, methyl ester 0.10 Maltol 0.06 2-Propenal, 2-methyl-3-phenyl- 0.17 4-Ethylbenzoic acid, but-3-yn-2-yl ester 0.08 4-Methoxy-2-methyl-1-(methylthio)benzene 0.06 4-Methyl-2,5-dimethoxybenzaldehyde 0.06 Tridecanedial 0.74 2-Naphthalenone, octahydro-4,7,7-trimethyl- 0.06 Total 31.83 Table S5. Composition of bio-oil obtained by pyrolyzing kitchen waste with graphite at 1:1 (wt./wt.) on moisture free basis. Composition Product (area%) Furan derivatives 7.61 Furfural 4.28 2-Furanmethanol 0.67 Butyrolactone 0.40 2-Furancarboxaldehyde, 5-methyl- 2.09 2-Acetyl-5-methylfuran 0.09 Benzofuran, 2-methyl- 0.08 12 Aromatics 0.25 Toluene 0.25 Condensed ring aromatics 0.35 Indene, 1-methyl- 0.10 Naphthalene 0.12 Naphthalene, 2,6-bis(1,1-dimethylethyl)- 0.08 Indene, 4,7-dimethyl- 0.05 Phenolics 3.41 Phenol 0.38 Phenol, 2,4-dimethyl- 0.60 Phenol, 3-ethyl- 0.14 P-Cresol 2.07 Phenol, 2-methoxy- 0.07 2-Methoxy-4-vinylphenol 0.06 Trans-Isoeugenol 0.09 Alkanes 1.37 Tetracosane 0.90 Octadecane 0.47 Cycloalkanes 2.5 Cyclohexane, 1,2-dimethyl-3-pentyl-4-propyl- 2.50 Alkenes 9.8 Limonene 0.06 1-Hexacosene 2.41 2,4-Hexadiene, 3,4-dimethyl- 0.04 2,6,10,14-Tetramethyl-7-(3-methylpent-4-enylidene) pentadecane 7.29 Ketone derivatives 2.86 2-Propanone, 1-hydroxy- 1.20 3-Penten-2-one 0.08 2-Cyclopenten-1-one, 2-methyl- 0.94 2-Cyclopenten-1-one, 3-methyl- 0.07 2-Cyclopenten-1-one, 3,4-dimethyl- 0.18 1,2-Cyclopentanedione, 3-methyl- 0.22 7-Methylindan-1-one 0.04 Cyclohexanone, 3-ethenyl- 0.08 Ethanone, 1-(methylenecyclopropyl) 0.05 Alcohol derivatives 2.80 2-Methyl-1,5-hexadiene-3-ol 0.05 3-Methylbenzyl alcohol 0.10 Cycloheptanol, 2-methylene 1.44 11,13-Dimethyl-12-tetradecen-1-ol acetate 1.21 Other oxygenates 3.20 13 1,6-Dianhydro-.alpha.-d-glucopyranose 0.18 4-Acetylphenyl ether 0.21 Fumaric acid, 4-cyanophenyl dodecyl ester 1.40 Tridecanedial 1.20 Benzene, 1-ethyl-4-methoxy- 0.10 Cyclopropane, 1-(1'-propenyl)-2-hydroxymethyl- 0.11 Total 34.15 Table S6.
Load more

Recommended publications
  • Implications for Extraterrestrial Hydrocarbon Chemistry: Analysis Of
    The Astrophysical Journal, 889:3 (26pp), 2020 January 20 https://doi.org/10.3847/1538-4357/ab616c © 2020. The American Astronomical Society. All rights reserved. Implications for Extraterrestrial Hydrocarbon Chemistry: Analysis of Acetylene (C2H2) and D2-acetylene (C2D2) Ices Exposed to Ionizing Radiation via Ultraviolet–Visible Spectroscopy, Infrared Spectroscopy, and Reflectron Time-of-flight Mass Spectrometry Matthew J. Abplanalp1,2 and Ralf I. Kaiser1,2 1 W. M. Keck Research Laboratory in Astrochemistry, University of Hawaii at Manoa, Honolulu, HI 96822, USA 2 Department of Chemistry, University of Hawaii at Manoa, Honolulu, HI 96822, USA Received 2019 October 4; revised 2019 December 7; accepted 2019 December 10; published 2020 January 20 Abstract The processing of the simple hydrocarbon ice, acetylene (C2H2/C2D2), via energetic electrons, thus simulating the processes in the track of galactic cosmic-ray particles penetrating solid matter, was carried out in an ultrahigh vacuum surface apparatus. The chemical evolution of the ices was monitored online and in situ utilizing Fourier transform infrared spectroscopy (FTIR) and ultraviolet–visible spectroscopy and, during temperature programmed desorption, via a quadrupole mass spectrometer with an electron impact ionization source (EI-QMS) and a reflectron time-of-flight mass spectrometer utilizing single-photon photoionization (SPI-ReTOF-MS) along with resonance-enhanced multiphoton photoionization (REMPI-ReTOF-MS). The confirmation of previous in situ studies of ethylene ice irradiation
    [Show full text]
  • Text Related to Segment 5.02 ©2002 Claude E. Wintner from the Previous Segment We Have the Value of the Heat of Combustion Of
    Text Related to Segment 5.02 ©2002 Claude E. Wintner From the previous segment we have the value of the heat of combustion of an "unstrained" methylene unit as -157.4 kcal/mole. On this basis one would predict that combustion of "unstrained" cyclopropane should liberate 3 X 157.4 = 472.2 kcal/mole; however, when cyclopropane is burned, a value of 499.8 kcal/mole is measured for the actual heat of combustion. The difference of 27.6 kcal/mole is interpreted as representing the higher internal energy ("strain energy") of real cyclopropane as compared to a postulated strain-free "model." ("Model" in this usage speaks of a proposal, or postulate.) These facts are graphed conveniently on an energy diagram as follows: "Strain Energy" represents the error units: kcal/mole not to scale in the "strain-free model" real cyclopropane + 4.5 O2 27.6 "strain-free model" of cyclopropane 499.8 observed heat of combustion + 4.5 O2 472.2 3CO2 + 3H2O heat of combustion predicted for "strain-free model" Note that this estimate of the strain energy in cyclopropane amounts to 9.2 kcal/mole of strain per methylene group (dividing 27.6 by 3, because of the three carbon atoms). Comparable values in kcal/mole for other small and medium rings are given in the following table. As one might expect, in general the strain decreases as the ring is enlarged. units: kcal/mole n Total Strain Strain per CH2 3 27.6 9.2 (CH2)n 4 26.3 6.6 5 6.2 1.2 6 0.1 0.0 ! 7 6.2 0.9 8 9.7 1.2 9 12.6 1.4 10 12.4 1.2 12 4.1 0.3 15 1.9 0.1 Without entering into a discussion of the relevant bonding concepts here, and instead relying on geometry alone, interpretation of the source of the strain energy in cyclopropane and cyclobutane is to some extent self-evident.
    [Show full text]
  • Cycloalkanes, Cycloalkenes, and Cycloalkynes
    CYCLOALKANES, CYCLOALKENES, AND CYCLOALKYNES any important hydrocarbons, known as cycloalkanes, contain rings of carbon atoms linked together by single bonds. The simple cycloalkanes of formula (CH,), make up a particularly important homologous series in which the chemical properties change in a much more dramatic way with increasing n than do those of the acyclic hydrocarbons CH,(CH,),,-,H. The cyclo- alkanes with small rings (n = 3-6) are of special interest in exhibiting chemical properties intermediate between those of alkanes and alkenes. In this chapter we will show how this behavior can be explained in terms of angle strain and steric hindrance, concepts that have been introduced previously and will be used with increasing frequency as we proceed further. We also discuss the conformations of cycloalkanes, especially cyclo- hexane, in detail because of their importance to the chemistry of many kinds of naturally occurring organic compounds. Some attention also will be paid to polycyclic compounds, substances with more than one ring, and to cyclo- alkenes and cycloalkynes. 12-1 NOMENCLATURE AND PHYSICAL PROPERTIES OF CYCLOALKANES The IUPAC system for naming cycloalkanes and cycloalkenes was presented in some detail in Sections 3-2 and 3-3, and you may wish to review that ma- terial before proceeding further. Additional procedures are required for naming 446 12 Cycloalkanes, Cycloalkenes, and Cycloalkynes Table 12-1 Physical Properties of Alkanes and Cycloalkanes Density, Compounds Bp, "C Mp, "C diO,g ml-' propane cyclopropane butane cyclobutane pentane cyclopentane hexane cyclohexane heptane cycloheptane octane cyclooctane nonane cyclononane "At -40". bUnder pressure. polycyclic compounds, which have rings with common carbons, and these will be discussed later in this chapter.
    [Show full text]
  • Industrial Hydrocarbon Processes
    Handbook of INDUSTRIAL HYDROCARBON PROCESSES JAMES G. SPEIGHT PhD, DSc AMSTERDAM • BOSTON • HEIDELBERG • LONDON NEW YORK • OXFORD • PARIS • SAN DIEGO SAN FRANCISCO • SINGAPORE • SYDNEY • TOKYO Gulf Professional Publishing is an imprint of Elsevier Gulf Professional Publishing is an imprint of Elsevier The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK 30 Corporate Drive, Suite 400, Burlington, MA 01803, USA First edition 2011 Copyright Ó 2011 Elsevier Inc. All rights reserved No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written permission of the publisher Permissions may be sought directly from Elsevier’s Science & Technology Rights Department in Oxford, UK: phone (+44) (0) 1865 843830; fax (+44) (0) 1865 853333; email: [email protected]. Alternatively you can submit your request online by visiting the Elsevier web site at http://elsevier.com/locate/ permissions, and selecting Obtaining permission to use Elsevier material Notice No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. Because of rapid advances in the medical sciences, in particular, independent verification of diagnoses and drug dosages should be made British Library Cataloguing in Publication Data
    [Show full text]
  • 1 Chapter 3: Organic Compounds: Alkanes and Cycloalkanes
    Chapter 3: Organic Compounds: Alkanes and Cycloalkanes >11 million organic compounds which are classified into families according to structure and reactivity Functional Group (FG): group of atoms which are part of a large molecule that have characteristic chemical behavior. FG’s behave similarly in every molecule they are part of. The chemistry of the organic molecule is defined by the function groups it contains 1 C C Alkanes Carbon - Carbon Multiple Bonds Carbon-heteroatom single bonds basic C N C C C X X= F, Cl, Br, I amines Alkenes Alkyl Halide H C C C O C C O Alkynes alcohols ethers acidic H H H C S C C C C S C C H sulfides C C thiols (disulfides) H H Arenes Carbonyl-oxygen double bonds (carbonyls) Carbon-nitrogen multiple bonds acidic basic O O O N H C H C O C Cl imine (Schiff base) aldehyde carboxylic acid acid chloride O O O O C C N C C C C O O C C nitrile (cyano group) ketones ester anhydrides O C N amide opsin Lys-NH2 + Lys- opsin H O H N rhodopsin H 2 Alkanes and Alkane Isomers Alkanes: organic compounds with only C-C and C-H single (s) bonds. general formula for alkanes: CnH(2n+2) Saturated hydrocarbons Hydrocarbons: contains only carbon and hydrogen Saturated" contains only single bonds Isomers: compounds with the same chemical formula, but different arrangement of atoms Constitutional isomer: have different connectivities (not limited to alkanes) C H O C4H10 C5H12 2 6 O OH butanol diethyl ether straight-chain or normal hydrocarbons branched hydrocarbons n-butane n-pentane Systematic Nomenclature (IUPAC System) Prefix-Parent-Suffix
    [Show full text]
  • Nobel Lecture, December 12, 1945
    L EOPOLD Multimembered rings, higher terpene compounds and male sex hormones Nobel Lecture, December 12, 1945 This lecture should have been delivered in December 1939*, but owing to a postponement of 6 years forced by the intervention of war, I have been able to use some results obtained in the meantime to round off the overall picture. Consequently I can now report on the results of 25 years of laboratory work in two fields of the chemistry of alicyclic compounds: multimembered rings and higher terpene compounds (polyterpenes), to which the third group named in the title, the male sex hormones, is closely related. Alicyclic compounds scarcely differ in their chemical properties from their aliphatic analogues. Many investigations, especially during the past twenty- five years, have shown, however, that in spite of this close chemical similarity aliphatic compounds and their alicyclic analogues can exhibit entirely different physiological properties. We see that certain well-defined physiological prop- erties may appear or disappear in the transition from an aliphatic to an alicyclic compound or vice versa. As a result of the accumulation of such observations, alicyclic compounds to which only scant biochemical importance was at- tached as little as 20-25 years ago, have now advanced to the forefront of interest. Multimembered rings After Kekulé, in 1865, first introduced the carbon ring into structural chem- istry in his formula for benzene, the 6-membered ring maintained its unique position in the taxonomy of organic chemistry for several decades. Indeed, a heterocyclic 5-membered ring containing nitrogen became known in 1870 as a result of Adolf von Baeyer’s work on indigo; but this did not imme- * Data available at that time formed the subject of a number of lectures which I de- livered between December 1939 and April 1940 in Zurich, Zagreb, Utrecht, Amster- dam, Delft, Liége, Brussels and Paris.
    [Show full text]
  • Light Cycle Oil Source for Hydrogen Production Through Autothermal Reforming Using Ruthenium Doped Perovskite Catalysts
    catalysts Article Light Cycle Oil Source for Hydrogen Production through Autothermal Reforming using Ruthenium doped Perovskite Catalysts Yukwon Jeon 1,*, Hoi-Kyoeng Jung 2, Cho-I Park 2, Yonggun Shul 3 and Joo-il Park 2,* 1 Department of Environmental Engineering, Yonsei University, 1 Yonsei-gil, Wonju, Gangwon-do 26493, Korea 2 Department of Chemical & Biological Engineering, Hanbat National University, Daejeon 34158, Korea; [email protected] (H.-K.J.); [email protected] (C.-I.P.) 3 Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Korea; [email protected] * Correspondence: [email protected] (Y.J.); [email protected] (J.-i.P.); Tel.: +82-33-760-2466 (Y.J.); +82-42-821-1530 (J.-i.P.) Received: 15 August 2020; Accepted: 8 September 2020; Published: 10 September 2020 Abstract: As the hydrogen economy is coming soon, the development of an efficient H2 production system is the first issue to focus on. In this study, a first attempt to utilize light cycle oil (LCO) feedstock is introduced for H2 production through autothermal reforming (ATR) using perovskite catalysts. From a careful characterization, it is found that LCO possesses a high content of C–H and S/N compounds with over 3–4 ring bonds. These various compounds can directly cause catalyst deactivations to lower the capability of H2 extraction from LCO. To achieve a heteroatom resistance, two different perovskite micro-tubular catalysts are designed with a Ru substitution at the B-site. The activity and stability of the Ru doped perovskite were controlled by modifying the Ru electronic structure, which also affects the oxygen structures.
    [Show full text]
  • Accepted Version
    ACCEPTED VERSION Shaghayegh Dezvarei, Hiroki Onoda, Osami Shoji, Yoshihito Watanabe, Stephen G. Bell Efficient hydroxylation of cycloalkanes by co-addition of decoy molecules to variants of the cytochrome P450 CYP102A1 Journal of Inorganic Biochemistry, 2018; 183:137-145 © 2018 Elsevier Inc. All rights reserved. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ Final publication at http://dx.doi.org/10.1016/j.jinorgbio.2018.03.001 PERMISSIONS https://www.elsevier.com/about/our-business/policies/sharing Accepted Manuscript Authors can share their accepted manuscript: [24 months embargo] After the embargo period via non-commercial hosting platforms such as their institutional repository via commercial sites with which Elsevier has an agreement In all cases accepted manuscripts should: link to the formal publication via its DOI bear a CC-BY-NC-ND license – this is easy to do if aggregated with other manuscripts, for example in a repository or other site, be shared in alignment with our hosting policy not be added to or enhanced in any way to appear more like, or to substitute for, the published journal article 19 June 2020 http://hdl.handle.net/2440/113527 Efficient hydroxylation of cycloalkanes by co-addition of decoy molecules to variants of the cytochrome P450 CYP102A1 Shaghayegh Dezvarei,a Osami Shoji,b Yoshihito Watanabe,b and Stephen G. Bella,* a Department of Chemistry, University of Adelaide, Adelaide, 5005, Australia b Department of Chemistry, Graduate School of Science, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, 464-8602, Japan Dr Stephen G.
    [Show full text]
  • Baeyer's Angle Strain Theory for B.Sc. Sem-II Organic Chemistry: US02CCHE01 by Dr. Vipul B. Kataria Introduction
    Baeyer’s Angle Strain Theory For B.Sc. Sem-II Organic Chemistry: US02CCHE01 By Dr. Vipul B. Kataria Introduction Van’t Hoff and Lebel proposed tetrahedral geometry of carbon. The bond angel is of 109˚ 28' (or 109.5˚) for carbon atom in tetrahedral geometry (methane molecule). Baeyer observed different bond angles for different cycloalkanes and also observed some different properties and stability. On this basis, he proposed angle strain theory. The theory explains reactivity and stability of cycloalkanes. Baeyer proposed that the optimum overlap of atomic orbitals is achieved for bond angel of 109.5o. In short, it is ideal bond angle for alkane compounds. Effective and optimum overlap of atomic orbitals produces maximum bond strength and stable molecule. If bond angles deviate from the ideal then ring produce strain. Higher the strain higher the instability. Higher strain produce increased reactivity and increases heat of combustion. Baeyer proposed “any deviation of bond angle from ideal bond angle value (109.5o) will produce a strain in molecule. Higher the deviation lesser the instability”. Que.1 Discuss Baeyer’s angle strain theory using concept of angle strain. Baeyer’s theory is based upon some assumptions as following. 1. All ring systems are planar. Deviation from normal tetrahedral angles results in to instable cycloalkanes. 2. The large ring systems involve negative strain hence do not exists. 3. The bond angles in cyclohexane and higher cycloalkanes (cycloheptane, cyclooctane, cyclononane……..) are not larger than 109.5o because the carbon rings of those compounds are not planar (flat) but they are puckered (Wrinkled). 1 | Page These assumptions are helpful to understand instability of cycloalkane ring systems.
    [Show full text]
  • CHM 102-Lecture 2.Pptx
    CHM-102 –Lecture 2 Conformaons of acylic and cyclic systems: Deviaons from bond angles, cyclopropane, cyclobutane, strain energy etc, High energy materials from cyclic strained systems, propellanes, staffanes, cubanes etc. Natural product examples on cyclic small rings, (natural product drugs, thymine photodimerizaon, etc,); Renewable energy models from small strained cyclic systems (examples, photoirradiaon of norbornadiene, tetramethyldioxetanes, light eming examples etc) (3 hr) Bond rotaon (single bonds) allows chains of atoms to adopt a number of conformaons / shapes Pea moth pheromone Different shapes of same molecule RT in solu'on, all Rotate about single bonds in the arrowed bonds molecule constantly rotate No two molecules - chances of 2 More rota(ons exactly the same molecules with shape at any one exactly same shape More rota(ons 'me, they are s'll at any one 'me are all the same quite small. chemical compound— • Overall shape different, but local structure is same. sp3, sp2 etc. • Double bonds cannot rotate Conformaon and configuraon Structures that can be interconverted by rotang about single bonds: (no breaking - all different conformaons of the same molecule Each compound in two conformaons The following pairs can only be interconverted by breaking a bond. This means that they have different configuraons—configuraons can be interconverted only by breaking bonds. Three pairs of stereomers: each member of a pair has a different configuraon Some conformaons are more stable than others • Structures that can be interconverted simply by rotaon about single bonds are conformaons of the same molecule • Structures that can be interconverted only by breaking one or more bonds have different configuraons, and are stereoisomers Barrier to rotaon Rate of a chemical process - associated with an energy barrier (this holds both for reac'ons and simple bond rotaons): the lower the rate, the higher the barrier.
    [Show full text]
  • Reactions of OH Radicals with C6АC10 Cycloalkanes in The
    ARTICLE pubs.acs.org/JPCA Reactions of OH Radicals with C6ÀC10 Cycloalkanes in the Presence of NO: Isomerization of C7ÀC10 Cycloalkoxy Radicals † † ‡ † ‡ § Sara M. Aschmann, Janet Arey,*, , and Roger Atkinson*, , , † ‡ § Air Pollution Research Center, Department of Environmental Sciences, and Department of Chemistry, University of California, Riverside, California 92521, United States ABSTRACT: Rate constants have been measured for the reactions of OH À ( radicals with a series of C6 C10 cycloalkanes and cycloketones at 298 2K, by a relative rate technique. The measured rate constants (in units of À À À 10 12 cm3 molecule 1 s 1) were cycloheptane, 11.0 ( 0.4; cyclooctane, 13.5 ( 0.4; cyclodecane, 15.9 ( 0.5; cyclohexanone, 5.35 ( 0.10; cyclo- heptanone, 9.57 ( 0.41; cyclooctanone, 15.4 ( 0.7; and cyclodecanone, 20.4 ( 0.8, where the indicated errors are two least-squares standard deviations and do not include uncertainties in the rate constant for the reference compound n-octane. Formation yields of cycloheptanone from cycloheptane (4.2 ( 0.4%), cyclooctanone from cyclooctane (0.85 ( 0.2%), and cyclodecanone from cyclodecane (4.9 ( 0.5%) were also determined by gas chromatography, where the molar yields are in parentheses. Analyses of products by direct air sampling atmospheric pressure ionization mass spectrometry and by combined gas chromatographyÀmass spectrometry showed, in addition to the cycloketones, the presence of cycloalkyl nitrates, cyclic hydroxyketones, hydroxydicarbonyls, hydroxycarbonyl nitrates, and products attributed to carbonyl nitrates and/or cyclic hydroxynitrates. The observed formation of cyclic hydroxyketones from the cycloheptane, cyclooctane and cyclodecane reactions, with estimated molar yields of 46%, 28%, and 15%, respectively, indicates the occurrence of cycloalkoxy radical isomerization.
    [Show full text]
  • Cyclic Hydrocarbons
    Chemistry for Changing Times, Chapter 9 Organic Chemistry John Singer, Jackson Community College Organic Chemistry Organic chemistry is defined as the chemistry of hydrocarbons and their derivatives. Of tens of millions of known chemical compounds, over 95% are compounds of carbon. The Unique Carbon Atom Carbon is unique in that carbon atoms can bond to each other to form long chains and rings. NOTE: Carbon can only form 4 total bonds (bonds can be single bond to another C, single bond to another H or double or triple bond to another C) (see board) Hydrocarbons Hydrocarbons are the simplest organic compounds. Contains only carbon and hydrogen. Alkanes Alkanes are hydrocarbons that contain only single bonds. Because all carbon-to-carbon bonds are single bonds, alkanes are often called saturated hydrocarbons. The simplest hydrocarbon is methane (CH4). Alkanes The general formula of alkanes is CnH2n+2. Alkanes alkanes name = number prefix (# of C) + suffix -ane. pent = 5 (pentagon) hex = 6 (hexagon) oct = 8 (octopus) dec = 10 (decade) memorize alkane names for 1st 10 C Alkanes Ball-and-stick and space- filling models can be used to represent organic compounds. Alkanes Condensed structural formulas condensed structural formulas, C-to-H bond lines are omitted Butane: CH3CH2CH2CH3 See structural formula on board for the butane. (note 4 bonds per C) Bond Line (or skeletal structures, not in text) Every bend, there is a C with correct # H Butane: HW 9.1 structural formula, condensed formulas, skeletal formulas (a)Draw the structural formula for(4 bonds to C) CH CH CH CH 3 2 2 3 End 1/22 F (b)Draw skeletal formula for above (c) Give condensed & skeletal formula for: H H H H H H C C C C C H H H H H H Alkanes The alkanes represent a homologous series that differs by the number of —CH2— groups.
    [Show full text]