Integrated Communications Processors MPC8306 and MPC8306S PowerQUICC II Pro Processors

Overview 16 KB of L1 instruction and data caches, dual controller, a 16-bit local bus and two direct The MPC8306 and MPC8306S processors integer units and on-chip memory management memory access (DMA) channels. are part of the ultra low-end MPC830x units (MMUs). communications processor portfolio based In summary, the MPC8306S and MPC8306 QUICC Engine Technology on the e300 core architecture. They address devices provide users with a highly integrated, A communications complex, based on the requirements of networking applications, fully programmable communications QUICC Engine technology, forms the heart including I/O cards for low-end base stations, processor for use in many networking and of the networking capability of the MPC830x residential gateways, modem/routers, industrial control applications. This helps portfolio. The QUICC Engine block contains industrial control, factory automation and test ensure that a cost-effective system solution several peripheral controllers and a 32-bit and measurement applications. The MPC830x can be quickly developed and will offer RISC controller. Protocol support is provided portfolio extends current PowerQUICC flexibility to accommodate new standards by the main workhorses of the device—the offerings, providing similar DMIPS/MHz in and evolving system requirements. unified communication controllers (UCCs). CPU performance, additional functionality Each of the five UCCs can support a variety and faster interfaces while maintaining Typical Applications of communication protocols, including 10/100 code compatibility with PowerQUICC I and • I/O card for low-end base station Mbps and high-level data link PowerQUICC II processors. They also provide • Factory automation control (HDLC). Two of the UCCs can also competitive pricing, low power consumption, • Industrial control support IEEE® 1588 version-2 time stamping compact board footprint and a time to market (MPC8306 configuration only). • Test and measurement equipment advantage through cost-effective evaluation kits with optimized BSP and drivers. System Interface Unit MPC8306/S Features The MPC8306S and MPC8306 processors • High-performance, low-power and cost- Core Complex also include a 16-bit double data rate (DDR2) effective communications processor The MPC8306 and MPC8306S incorporate , 4 x CAN, 4 x UARTs, High- • The e300 core, built on Power Architecture the e300c3 (MPC603e-based) core, built on Speed USB 2.0 controller, enhanced SDHC technology, with dual integer units enables Power Architecture® technology, which includes more efficient operations to be conducted in parallel, resulting in a significant MPC8306/S Block Diagram performance improvement • The single-RISC QUICC Engine

e300 Core communications module offers a future- Complex 16-bit DDR2 proof solution for next-generation designs Controller by supporting programmable protocol 16 KB 16 KB termination and network interface D-Cache I-Cache termination to meet evolving protocol Local Bus standards QUICC Engine Coherent System Bus • DDR2 memory controller—one 16-bit 2 x DUART interface up to 266 MHz I2C Timers • Peripheral interfaces such as 16-bit, 66 MHz Up to 4 x SPI 2 x HDLC eSDHC USB 2 x local bus interface and High-Speed USB 3 x RMII/MII CAN GPIO /TDM 8-bit 2.0 DMA 2.0, 4 x CAN, 4 x UARTs, enhanced SDHC or 8-bit Interrupt Controller 2 x with controller ® IEEE 1588 Or 8-bit GPIO

Core Accelerators I/O • High degree of software compatibility product development. The BSP components with previous generation PowerQUICC provide the tools, device drivers and processor-based designs for backward additional features needed for embedded compatibility and easier software migration Linux® OS projects.

QUICC Engine Technology Features MPC8306-KIT Contents • Single 32-bit RISC controller for flexible • MPC8306 SOM board support of communications peripherals • MPC830x carrier card • Serial DMA channel for receive and transmit • BSP on all serial channels • UART cable • Ethernet cable • Five UCCs supporting the following • Power adaptor (12V–5A) and cable interfaces (not all of them simultaneously) - 10/100 Mbps Ethernet/IEEE Std. 802.3 MPC830x PowerQUICC II Pro Processor Portfolio through MII and RMII interfaces MPC8308 MPC8309 MPC8306 MPC8306S - IEEE 1588 version-2 support Core e300 e300 e300 e300 - HDLC/transparent (bit rate up to QUICC I-Cache/ 16K/16K 16K/16K 16K/16K 16K/16K Engine operating frequency divided by 8) D-Cache - HDLC bus (bit rate up to 10 Mbps) Floating Point Yes Yes Yes Yes Unit - PROFIBUS protocol support Core Frequency 266/333/400 266/333/400 133/200/266 133/200/266 - Asynchronous HDLC (bit rate up to QUICC Engine 2 Mbps) No 32-bit RISC 32-bit RISC 32-bit RISC Subsystem - Two TDM interfaces supporting up to 128 Memory 16/32-bit DDR2 16/32-bit DDR2 16-bit DDR2 16-bit DDR2 QUICC multi-channel controller channels Controller with ECC with ECC 8/16-bit up to 8/16-bit up to 8/16-bit up to 8/16-bit up to 66 Local Bus The UCCs are similar to the PowerQUICC II 66 MHz 66 MHz 66 MHz MHz peripherals in that the serial communications No (1 x PCI 32-bit up to PCI Interface No No controller (SCC) supports the UART and Express) 66 MHz HDLC bus and fast serial communications 3 x 10/100 3 x 10/100 2 x 10/100/1000 MII/RMII or 2 x MII/RMII or 2 x 3 x 10/100 controller (FCC) supports fast Ethernet and Ethernet MII/RGMI 10/100 with 10/100 with MII/RMII HDLC. IEEE 1588 V2 IEEE 1588 V2

Enablement USB 2.0 Yes Yes Yes Yes The MPC8306-KIT is a cost-optimized UART Yes (2 x) Yes (4 x) Yes (4 x) Yes (4 x) reference development kit for the MPC8306 I2C Controller Dual Dual Dual Dual processor. The kit consists of a carrier SPI Yes Yes Yes Yes card and processor-specific system on Interrupt IPIC IPIC IPIC IPIC module (SOM) card. The SOM interfaces Controller IEEE 1588 with peripherals through the carrier card. Yes Yes Yes No Support This same carrier card can be used for the MPC8308 and MPC8309 processor SOMs. eSDHC Yes Yes Yes No The MPC830x-KIT board support package eCAN Yes Yes Yes No 473-pin 489-pin 369-pin 369-pin (BSP) can be customized per project and Package MAPBGA MAPBGA MAPBGA MAPBGA combined with off-the-shelf software for

Learn More: For current information about Freescale products and documentation, please visit freescale.com/PowerQUICC.

Freescale, the Freescale logo and PowerQUICC are trademarks of , Inc. Reg. U.S. Pat. & Tm.Off. QUICC Engine is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. © 2010 Freescale Semiconductor, Inc. Document Number: MPC8306FS REV 1