DOCSLIB.ORG

TECHNICAL DATA / COLOR REVERSAL FILM May 2002 • E-2529

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
TECHNICAL DATA / COLOR REVERSAL FILM May 2002 • E-2529 TECHNICAL DATA / COLOR REVERSAL FILM May 2002 • E-2529 KODAK PROFESSIONAL EKTACHROME Duplicating SIZES AVAILABLE Film EDUPE is a low-contrast color reversal duplicating Sizes and catalog numbers may differ from country to film designed for making high-quality duplicates from country. See your dealer who supplies KODAK originals on KODAK EKTACHROME or KODACHROME PROFESSIONAL Products. Films. It features excellent color reproduction, extremely fine grain, and very high sharpness. Rolls Code / Acetate CAT No. Although its primary application is producing duplicate Spec No. Base slides, you can also use this film for making copy slides of 135-36 EDUPE 134 2641 high-contrast color reflection prints. EDUPE/ 35 mm x 100 ft 195 2837 SP663 FEATURES BENEFITS EDUPE/ 35 mm x 400 ft 114 7461 • Optimized spectral • Versatile performance SP663 sensitivity and tone scale • Exceptional tone and color EDUPE/ 35 mm x 1000 ft 197 5358 reproduction from a variety SP663 of original film types 5-mil EDUPE/ (0.13 mm) • Extended tone scale • Increased highlight and 46 mm x 100 ft 122 1985 latitude shadow detail SP446 EDUPE/ • Faithful reproduction of 61.5 mm x 100 ft 102 3035 original tone scale SP816 • Richer blacks EDUPE / 70 mm x 100 ft* 813 7523 • Cleaner whites SP481* • Finest grain available in a • Outstanding reproduction of 120 EDUPE 139 5268 color reversal duplicating detailed images—even with film enlargement *Perforated on both edges. • The perfect match for today’s finer-grained films Film Code Acetate • Excellent latent-image • No color or contrast shifts Sheets Size CAT No. keeping within a roll, or from the start Base to the end of the day 10 802 4531 • Superb reciprocity • No tone scale compromise 4 x 5 in. EDUPE characteristics with exposures from 10 50 8.2-mil 890 6943 seconds to 1/100 second 10 (0.21 mm) 133 1941 8 x 10 in. EDUPE • Flexibility to handle long 50 163 8444 exposures for dodge-and-burn or short exposures to maximize productivity STORAGE AND HANDLING • Robust processing • Consistency from run to run Load and unload film in subdued light. performance and day to day Store unexposed film in a refrigerator at 13°C (55°F) or • Common emulsion • Same great results from both lower in the original sealed package. To avoid moisture technology sheet and roll formats condensation on film that has been refrigerated, allow the • Same rich color dyes as • Scanning compatibility with film to warm up to room temperature before opening the KODAK PROFESSIONAL other popular KODAK EKTACHROME Films EKTACHROME Films package. Process film as soon as possible after exposure. E100S, E100SW, E100VS, Protect processed slides and transparencies from strong and E200 light, and store them in a cool, dry place. For more information, see KODAK Publication No. E-30, Storage and Care of KODAK Photographic Materials—Before and After Processing. ©Eastman Kodak Company, 2000 DARKROOM RECOMMENDATIONS Optical Printers Do not use a safelight. Handle unprocessed film in total If your equipment holds filters between the light source and darkness. the original transparency, use KODAK Color Printing Filters (Acetate) for color-balance adjustments. Use KODAK WRATTEN Gelatin Filter / Color Compensating if EXPOSURE GUIDELINES you must place the filters between the lens and the You can expose this film with enlargers, optical printers, duplicating film. Also use a heat-absorbing glass, an contact-printing equipment, or cameras. A diffuse optical ultraviolet-absorbing filter (such as KODAK WRATTEN system offers the least difficulty with dust and scratches. Gelatin Filter No. 2B or a KODAK Acetate Filter / Color Certain factors in the darkroom will influence the quality Printing CP2B). of your results. You can optimize your results by taking these Start with the filter pack printed on the film carton. Then steps: add any necessary filters listed in the table under “Filter • Make sure the darkroom is lighttight. Check for light Recommendations.” leaks around doors and vents, and mask them if Note: When duplicating mounted slides, adjust the printer to necessary. a 1.03X magnification. While some cropping will occur, this magnification ensures that none of the slide mount will be • Paint the walls, ceiling, and other prominent surfaces included in the duplicate. To verify correct lens flat black. Minimize or eliminate other reflective magnification, first project the original slide, and measure materials and digital displays. the distance between two widely separated points on the • Avoid fluorescent tubes in the darkroom—they emit a projected image. Then project the duplicate slide, and weak illumination just after being turned off. measure the distance between the same two points. Divide • Install a dark slide in any drawers used to store the distance measured on the duplicate by the distance unprocessed film. Verify that it is lighttight by placing measured on the original to determine the lens an unexposed sheet in the drawer, partially covered by magnification. an opaque material. Close the drawer, and leave the room lights on for four hours. If, after processing the Contact-Printing Equipment film, you see a density difference or a line Use an enlarger as the light source for contact printing corresponding to the opaque material, the drawer is not original transparencies onto the duplicating film. Use clear, lighttight. scratch-free glass of good optical quality, and keep all surfaces clean to minimize problems with dust. The original Enlargers transparency must be in complete contact with the glass With either tungsten or pulsed-xenon illumination, set the during the exposure for sharp images. Also, the emulsion illumination level at the exposure plane to one footcandle side of the original transparency should be in contact with (10.8 lux). Use a light integrator to measure pulsed-xenon the emulsion side of the duplicating film. Duplicate illumination. With either illumination, measure without transparencies made by contact printing will have slightly correction filters in the light beam. Enlargers must have a higher contrast than those made by using an optical system. heat-absorbing glass, and an ultraviolet-absorbing filter (such as KODAK WRATTEN Gelatin Filter No. 2B or a KODAK Acetate Filter / Color Printing CP2B). Start with the filter pack printed on the film carton. Then add any necessary filters listed in the table under “Filter Recommendations.” Note: Very short exposure times may not be repeatable. Consult the timer manufacturer for exposure limitations. If your exposure is too short for your timer, add neutral density filtration. Caution Consult the manufacturer of pulsed-xenon lamps for ventilation recommendations and information on ultraviolet radiation. 2 KODAK PROFESSIONAL EKTACHROME Duplicating Film EDUPE • E-2529 35 mm Cameras Filter Recommendations You can make duplicate slides with a single-lens reflex When using tungsten illumination, start with the basic filter camera and a suitable slide-duplicating attachment. pack printed on the film box. The table below shows the Tungsten (3200 K) Illumination. As a starting point, set additional filtration needed when you use this film with other the camera ISO or ASA speed indicator to the exposure light sources. In all cases, use these filters in addition to the index printed on the film box. Set the shutter speed at filtration printed on the box and a KODAK WRATTEN 1 second. Gelatin Filter No. 2B. Standard Illuminator (5000 K). As a starting point, set The following filter recommendations are for KODAK the camera speed indicator to the exposure index printed on PROFESSIONAL WRATTEN Gelatin Filters / Color the film carton. Set the shutter speed at 1⁄8 second. Compensating. If you use dichroic filters, you may have to Electronic Flash. Make a trial exposure series with the make some adjustments. camera shutter set at its flash synchronization speed and the flash unit set on Manual. Pulsed Xenon Electronic Flash 5000 K Illuminator Start with the filter pack printed on the film carton. Then Filtration for EKTACHROME Films add any necessary filters listed in the table under “Filter 85B 10M + 60Y 30R Recommendations.” Filtration for KODACHROME Films For maximum sharpness, place the filters between the 85B + 10C 50Y 20R original transparency and the light source. Make an exposure series in 1⁄3-stop increments to Flash exposure is based on electronic flash (5500 K) with determine the best exposure for your film and equipment. If appropriate color-conversion, color-balancing, and the lowest film speed setting on your camera is 25, set the ultraviolet filters. If the electronic flash source is higher or speed indicator at 25 and adjust the aperture as follows. lower in color temperature than 5500 K, increase the filtration as follows. Exposure Index Provided Increase the Lens Aperture • 6000 K to 5500 K: add KODAK WRATTEN Gelatin with the Film by Filter / Light Balancing No. 81 12 1 stop 6 2 stops • 5000 K to 5500 K: add KODAK PROFESSIONAL 3 3 stops Gelatin Filter / Light Balancing No. 82 Distinguishing Originals on KODACHROME KODAK WRATTEN Gelatin Filters and KODAK and KODAK EKTACHROME Films Acetate Filters are now distributed by Tiffen Co. L.L.C. In the U.S. call 800-368-6257 or view their website at To help you identify the type of original being duplicated, www.tiffen.com. here is a brief summary of Kodak films and their processes: KODACHROME Films: All KODACHROME Films have a “relief image,” that is, the image appears to be EXPOSURE dimensional or “raised” on the emulsion side. Make a series of exposures in 1⁄3-stop increments, starting KODACHROME Film originals typically require with the filtration provided. CC10C more filtration than KODAK EKTACHROME Standard 1/3-stop Exposure-Index ratings: Film originals. 4, 5, 6, 8, 10, 12, 16, 20, 25, 32, 40 KODAK EKTACHROME Films: EKTACHROME Films do not have a raised or “relief” image on the Note: Roll format film labels include a starting point emulsion side; both sides are smooth.
Load more

Recommended publications
  • Download the Technical Data for Kodak Professional
    TECHNICAL DATA / COLOR TRANSPARENCY FILM May 2004 • E-2529 KODAK PROFESSIONAL EKTACHROME Duplicating SIZES AVAILABLE Film EDUPE is a low-contrast color reversal duplicating Sizes and catalog numbers may differ from country to film designed for making high-quality duplicates from country. See your dealer who supplies KODAK originals on KODAK EKTACHROME or KODACHROME PROFESSIONAL Products. Films. It features excellent color reproduction, extremely fine grain, and very high sharpness. Rolls Code / Acetate CAT No. Although its primary application is producing duplicate Spec No. Base slides, you can also use this film for making copy slides of 135-36 EDUPE 134 2641 high-contrast color reflection prints. EDUPE/ 35 mm x 100 ft 195 2837 SP663 FEATURES BENEFITS EDUPE/ 35 mm x 400 ft 114 7461 • Optimized spectral • Versatile performance SP663 sensitivity and tone scale • Exceptional tone and color EDUPE/ 35 mm x 1000 ft 197 5358 reproduction from a variety SP663 of original film types 5-mil EDUPE/ (0.13 mm) • Extended tone scale • Increased highlight and 46 mm x 100 ft 122 1985 latitude shadow detail SP446 EDUPE/ • Faithful reproduction of 61.5 mm x 100 ft 102 3035 original tone scale SP816 • Richer blacks EDUPE / 70 mm x 100 ft* 813 7523 • Cleaner whites SP481* • Finest grain available in a • Outstanding reproduction of 120 EDUPE 139 5268 color reversal duplicating detailed images—even with film enlargement *Perforated on both edges. • The perfect match for today’s finer-grained films Film Code Acetate • Excellent latent-image • No color or contrast shifts Sheets Size CAT No. keeping within a roll, or from the start Base to the end of the day 10 802 4531 • Superb reciprocity • No tone scale compromise 4 x 5 in.
    [Show full text]
  • Color and False-Color Films for Aerial Photography
    Color and False-Color Films for Aerial Photography RATFE G. TARKINGTON and ALLAN L. SOREM Research Laboratories, Eastman Kodak Company Rochester, N. Y. ABSTRACT: Color reproduction by the photographic process using three primary colors is discussed, and the 11se of these photographic and optical principles for false-color reproduction is explained. The characteristics of two new aerial films-Kodak Ektachrome Aero Film (Process E-3) and a false-color type, Kodak Ektachrome Infrared Aero Film (Process E-3)-are compared with those of the older products they replace. The new films have higher speed, im­ proved definition, and less granularity. OPULAR processes of color photography are KODAK EKTACHROME AERO FILM (PROCESS E-3) P based upon the facts that (1) the colors perceived by the human eye can be produced BLUE SENSITIVE YELLOW POSITIVE IMAGE by mixtures of only three suitably chosen =====::::==l=====~=~=~~[M~ colors called primaries; (2) photographic GREEN SENSITIVE MAGENTA POSITIVE IMAGE emulsions can be made to respond selectively REO SENSITIVE CYAN POSITIVE IMAGE to each of these three colors; and (3) chemical reactions exist which can produce three in­ dividual colorants, each capable of absorbing FIG. 1. Schematic representation of a essentially only one of the chosen primary multilayer color film. colors. Although theory imposes no single unique set of three primary colors, in prac­ in a scene, but the results obtained with tice the colors chosen are those produced by modern color photographic materials are re­ light from successive thirds of the visible markably realistic representations of the spectrum: red, green, and blue. When these original scene.
    [Show full text]
  • Mindful Photographer
    Operating Manual for the Mindful Photographer Ed Heckerman Copyright © 2017 Cerritos College and Ed Heckerman 11110 Alondra Blvd., Norwalk, CA 90650 Second Edition, 2018 This interactive PDF was made in partial fulfillment for a sabbatical during the academic year 2016 - 2017. No part of the text of this book may be reporduced without permission from Cerritos College. All photographs were taken by Ed Heckerman and produced independently from sabbat- ical contract. Ed Heckerman maintains the copyright for all the photographs and edition changes. No images may be copied from this manual for any use without his consent. Contents Part 1 — Insights and Aspirations 1 contents page Introduction 1 What is Photography? 2 What is a Photograph? Motivations — Why Make Photographs? Photography and Mindfulness 6 Thoughts On Tradition ��������������������������������������������������������������������������12 Part 2 — Navigating Choices ������������������������������������������������������������� 14 Cameras Loading Your Camera Unloading Your Camera Manual Focus Autofocus Sensitivity and Resolution — ISO Controlling Exposure — Setting the Aperture and Shutter Speed Shutter Speed Coordinating Apertures and Shutter Speeds Exposure Metering Systems ��������������������������������������������������������������� 25 Full-frame Average Metering Center Weighted Metering Spot Metering Multi-Zone Metering Incident Metering
    [Show full text]
  • EASTMAN TRI-X Reversal Film 7278™
    TECHNICAL DATA / BLACK-AND-WHITE REVERSAL FILM February 1999 • H-1-7278 H-1-7278 EASTMAN TRI-X July 1996 Reversal Film 7278™ DESCRIPTION For more information about medium- and long-term EASTMAN TRI-X Reversal Film 7278 (16 mm) is a high- storage, see NAPM IT9.11-1992, and KODAK Publications speed, panchromatic black-and-white film with an anti- H-1, KODAK Motion Picture Film, and H-23, The Book of halation undercoat that makes it suitable for general interior Film Care. photography with artificial light. It can be used in daylight and is particularly useful for photographing sports at regular EXPOSURE INDEXES speed or in slow motion in low-light conditions late in the Use the following exposure indexes for recommended day or with an overcast sky. This film is characterized by reversal processing: excellent tonal gradation and high resolving power. Tungsten (3200K)—160 When processed as a reversal film, the resulting positive Daylight*—200 can be used for projection or for duplication. If processed as Use these indexes with incident- or reflected-light exposure a negative material by conventional methods, this film will meters and cameras marked for ISO or ASA speeds or yield satisfactory results, although there will be some loss in exposure indexes. These indexes apply for meter readings of speed. average subjects made from the camera position or for readings made from a gray card of 18-percent reflectance BASE held close to and in front of the subject. For unusually light- This film has a gray acetate safety base with an additional or dark-colored subjects, decrease or increase the exposure anti-halation undercoat.
    [Show full text]
  • Kodak Ektachrome 100D Color Reversal Film  7294
    KODAK EKTACHROME 100D COLOR REVERSAL FILM 7294 Shoot With a Film Icon The unparalleled look of KODAK EKTACHROME is waiting… For decades, KODAK EKTACHROME set the What’s more, KODAK EKTACHROME 100D standard for ilmmakers seeking beautiful grain, Color Reversal Film / 7294 also has very strong clean vibrant colors and a distinctive aesthetic. reciprocity and keeping stability so you can trust Now KODAK EKTACHROME 100D Color Reversal each shot will remain exactly as you pictured it. Film / 7294 carries that standard forward into the future, for a new wave of ilmmakers to embrace. Conventional or creative. Product, landscape, nature or fashion. Choose KODAK EKTACHROME Making more of daylight illumination, KODAK 100D Color Reversal Film / 7294 to realise your EKTACHROME 100D Color Reversal Film / 7294’s vision – through the lawless beauty of ilm. dense blacks, rich deep color, neutral gray scale and true-to-life skin tones will elevate your storytelling, frame by frame. With exceptional sharpness and an extremely ine grain, it o ers outstanding, consistent, uniform results in outdoor light or in well lit studio applications where moderate color saturation is required. KODAK EKTACHROME 100D COLOR REVERSAL FILM 7294 Base Exposure Index KODAK Filters Exposure Light Source KODAK EKTACHROME 100D Color Daylight (5500K) - 100 on Camera* Index Reversal Film / 7294 has an acetate Tungsten (3200K) - 25 Daylight None 100 safety base. Use these indexes with incident or (5500 K) relected light exposure meters and Metal Halide None 100 Darkroom Recommendations cameras marked for ISO or ASA speeds Do not use a safelight. Handle or exposure indexes. H.M.I.
    [Show full text]
  • Using KODAK EKTACHROME 100D Color Reversal Film 7285 in Your Super 8 Camera CURRENT INFORMATION SUMMARY March 2010 • CIS-287
    Using KODAK EKTACHROME 100D Color Reversal Film 7285 in Your Super 8 Camera CURRENT INFORMATION SUMMARY March 2010 • CIS-287 Kodak has recently announced the availability of KODAK Below is a detailed table summarizing the suggested EKTACHROME 100D Color Reversal Film 7285 in the filtration, Exposure Index, based on the available light Super 8 format. 100D Color Reversal Film features bright source: saturated colors, fine grain with excellent sharpness. It is important to note that KODAK EKTACHROME Light Source KODAK Filters on Camera Exposure 100D Color Reversal Camera Film 7285 is a daylight Index balanced film. No additional filtration is required when Daylight (5500 K) None 100 using the film in daylight conditions. The film cartridge is Tungsten (3000 K) WRATTEN Gelatin No. 80A 25 notched appropriately for the speed and color balance, Tungsten (3200 K) WRATTEN Gelatin No. 80A 25 which will allow it to perform optimally in automatic Fluorescent, Cool Color Compensating Filter 80 cameras. White CC20M Many older manual cameras will require some special Fluorescent, Deluxe WRATTEN Gelatin No. 82C 80 attention. Due to historical reasons (e.g. the films available Cool White at their time of manufacture), most of these cameras Metal Halide (H.M.I.) None 100 assume that the film to be used is tungsten balanced and either EI40 or EI160. This publication will help you get the EXPOSURE best possible results using 100D Film in these cameras. KODAK EKTACHROME 100D Color Reversal Camera Film FILTER USAGE 7285 is an ISO 100 rated product. It is important when exposing the film under daylight conditions that the Many cameras utilize an internal conversion filter to camera is set as close to ISO 100 as possible.
    [Show full text]
  • KODAK EKTACHROME 100D Color Reversal Film 5285 / 7285
    KODAK EKTACHROME 100D Color Reversal Film 5285 / 7285 TECHNICAL DATA / COLOR REVERSAL FILM February 2010 • H-1-5285 KODAK EKTACHROME 100D Color Reversal Film 5285 / EXPOSURE INDEXES 7285 is a 100-speed, high-color reversal motion picture Daylight (5500K): 100 camera film intended for photography under daylight Tungsten (3200K): 25 (with 80A filter) illumination (5500K). It offers strikingly saturated color Use these indexes with incident- or reflected-light performance while maintaining a neutral gray scale and exposure meters and cameras marked for ISO or ASA accurate flesh reproduction. speeds or exposure indexes. These indexes apply for 5285/7285 Film has exceptional sharpness that is meter readings of average subjects made from the camera unsurpassed by any other 100-speed reversal film, and its position or for readings made from a gray card of grain performance is excellent. This film also offers very 18-percent reflectance held close to and in front of the strong reciprocity uniformity and keeping stability. subject. For unusually light- or dark-colored subjects, This film offers outstanding results in outdoor and decrease or increase the exposure indicated by the meter studio applications where strong color saturation is accordingly. desired. It is excellent for advertising, nature cinematography, documentaries, music videos, and is Super 8 Exposure especially good for telecine transfers and television Some older cameras may automatically set the exposure to filming. ISO 160. In many situations, results at an ISO 160 exposure 5285 Film is available in 35mm formats. 7285 Film is setting (approximately 1⁄2 stop underexposed) would still available in several 16mm formats, as well as Super 8 50-ft be acceptable.
    [Show full text]
  • KODAK MILESTONES 1879 - Eastman Invented an Emulsion-Coating Machine Which Enabled Him to Mass- Produce Photographic Dry Plates
    KODAK MILESTONES 1879 - Eastman invented an emulsion-coating machine which enabled him to mass- produce photographic dry plates. 1880 - Eastman began commercial production of dry plates in a rented loft of a building in Rochester, N.Y. 1881 - In January, Eastman and Henry A. Strong (a family friend and buggy-whip manufacturer) formed a partnership known as the Eastman Dry Plate Company. ♦ In September, Eastman quit his job as a bank clerk to devote his full time to the business. 1883 - The Eastman Dry Plate Company completed transfer of operations to a four- story building at what is now 343 State Street, Rochester, NY, the company's worldwide headquarters. 1884 - The business was changed from a partnership to a $200,000 corporation with 14 shareowners when the Eastman Dry Plate and Film Company was formed. ♦ EASTMAN Negative Paper was introduced. ♦ Eastman and William H. Walker, an associate, invented a roll holder for negative papers. 1885 - EASTMAN American Film was introduced - the first transparent photographic "film" as we know it today. ♦ The company opened a wholesale office in London, England. 1886 - George Eastman became one of the first American industrialists to employ a full- time research scientist to aid in the commercialization of a flexible, transparent film base. 1888 - The name "Kodak" was born and the KODAK camera was placed on the market, with the slogan, "You press the button - we do the rest." This was the birth of snapshot photography, as millions of amateur picture-takers know it today. 1889 - The first commercial transparent roll film, perfected by Eastman and his research chemist, was put on the market.
    [Show full text]
  • Introduction to Basic Color Photography Edition Date
    SUBCOURSE EDITION SS0514 A INTRODUCTION TO BASIC COLOR PHOTOGRAPHY EDITION DATE: SEPTEMBER 1994 INTRODUCTION TO BASIC COLOR PHOTOGRAPHY Subcourse Number SS0514 EDITION A United States Army Signal Center and School Fort Gordon, GA 30905-5074 5 Credit Hours Edition Date: September 1994 SUBCOURSE OVERVIEW This subcourse presents you with information on color photography, including theory, exposure, and printmaking. Topics covered include the theory of light, how colors are formed, and color print materials--their structure and exposure. Color negative developing using the popular C-41 process is explained, as well as the Ektaprint 2 process that is most often used to make color prints from negatives. The E6 reversal processing and the two methods of making prints from slides are examined (color coupler (conventional reversal paper) and dye destruction (like Cibachrome)). In addition, this subcourse defines general quality control procedures. Since duplicate transparencies are often required, the generation process is explained. There are no prerequisites for this subcourse. This subcourse reflects the doctrine which was current at the time it was prepared. In your own work situation, always refer to the latest official publications. Unless otherwise stated, the masculine gender of singular pronouns is used to refer to both men and women. TERMINAL LEARNING OBJECTIVE ACTION: You will identify procedures for color negative printing techniques, color reversal film processing and printing, and slide duplicating techniques. CONDITION: You will be given information from TM 11-401-2, STP 11- 25S13-SM-TG, and Photographer's Mate Training Series NAVEDTRA 373-02-45-83, MOD 2. STANDARD: To demonstrate competency of this task, you must achieve a minimum score of 70% on the subcourse examination.
    [Show full text]
  • KODAK TRI-X Reversal Film 7266
    TECHNICAL DATA / BLACK-AND-WHITE REVERSAL FILM August 2003 • H-1-7266t KODAK TRI-X Reversal Film 7266 We are committed to black & white film—improvements to DARKROOM RECOMMENDATIONS our family of reversal films prove it. New KODAK TRI-X Reversal Processing Reversal Film 7266 offers finer grain and increased All processing operations should be carried out in total sharpness, and includes EASTMAN KEYKODE Numbers darkness until the bleaching step has been completed. If for easy cross-reference of shots in minutes, not hours. necessary, the film can be examined (for a few seconds only) Reduced static support allows for a cleaner image after development is 50 percent complete. Use a throughout the filmmaking process. And because our new KODAK 3 Safelight Filter / dark green, with a 15-watt bulb, films do not require processing in a bleach containing heavy no closer to the film than 1.2 metres (4 feet). Following metals, they are easier on the environment. Our improved bleaching, normal room lighting can be used. films provide the rich blacks and high contrast you have come to expect from KODAK Black & White reversal films. Negative Processing KODAK TRI-X Reversal Film 7266 (16 mm) is a No safelight is recommended until after the stop bath. high-speed, panchromatic black-and-white film with an Unprocessed films must be handled in total darkness. antihalation undercoat that makes it suitable for general interior photography with artificial light. It can also be used in daylight and is particularly useful for sports pictures STORAGE taken at regular speed or slow motion in weak light (overcast Store unexposed film at 13°C(55°F) or lower.
    [Show full text]
  • Pre Pricelist.Pdf
    Please note: All Black-and-White CAT No. Price Placing an order EI Ratings are without filtration. KODAK TRI-X Reversal Film 7278 EI 160 (Tungsten) EI 200 (Daylight) Not all products are stocked in all CAT No. Price Perforated One Edge - Winding B - Super 16 warehouses. 35 mm Black & White Negative Films 147 2190 1 roll 400 ft Core $71.40 EASTMAN PLUS-X Negative Film 5231 Peforated Two Edges To facilitate ordering KODAK Motion EI 64 (Tungsten) EI 80 (Daylight) 147 2133 1 roll 100 ft Spool $18.85 Picture Film, please have the following 167 7723 1 roll 400 ft Core $124.56 147 2166 1 roll 200 ft Spool 36.70 information available: 111 6417 1 roll 1000 ft Core 311.40 147 2182 1 roll 400 ft Core 71.40 For High Speed Cameras 1. Your Customer Number (if you have an EASTMAN DOUBLE-X Negative Film 5222 147 2158 1 roll 100 ft Spool $18.85 EI 200 (Tungsten) EI 250 (Daylight) account with Eastman Kodak Company). 173 7279 1 roll 400 ft Core $124.56 2. The Catalog Numbers of the items you Super 8 mm Black & White Films wish to purchase. KODAK PLUS-X Reversal Film 7276 16 mm Black & White Negative Films EI 40 (Tungsten) EI 50 (Daylight) 502 9087 1 cart. 50 ft $9.65 EASTMAN PLUS-X Negative Film 7231 For more detailed product information, EI 64 (Tungsten) EI 80 (Daylight) KODAK TRI-X Reversal Film 7278 you may request a Price Catalog when Perforated One Edge - Winding B - Super 16 EI 160 (Tungsten) EI 200 (Daylight) you order film.
    [Show full text]
  • Introduction to Photography
    Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.com/shopping Introduction to Photography Study Material for Students : Introduction to Photography CAREER OPPORTUNITIES IN MEDIA WORLD Mass communication and Journalism is institutionalized and source specific. It functions through well-organized professionals and has an ever increasing interlace. Mass media has a global availability and it has converted the whole world in to a global village. A qualified journalism professional can take up a job of educating, entertaining, informing, persuading, interpreting, and guiding. Working in print media offers the opportunities to be a news reporter, news presenter, an editor, a feature writer, a photojournalist, etc. Electronic media offers great opportunities of being a news reporter, news Edited with the trial version of editor, newsreader, programme host, interviewer, cameraman,Foxit Advanced producer, PDF Editor To remove this notice, visit: director, etc. www.foxitsoftware.com/shopping Other titles of Mass Communication and Journalism professionals are script writer, production assistant, technical director, floor manager, lighting director, scenic director, coordinator, creative director, advertiser, media planner, media consultant, public relation officer, counselor, front office executive, event manager and others. 2 : Introduction to Photography INTRODUCTION The book will introduce the student to the techniques of photography. The book deals with the basic steps in photography. Students will also learn the different types of photography. The book also focuses of the various parts of a photographic camera and the various tools of photography. Students will learn the art of taking a good picture. The book also has introduction to photojournalism and the basic steps of film Edited with the trial version of development in photography.
    [Show full text]