Quick Reference Table

Total Page:16

File Type:pdf, Size:1020Kb

Quick Reference Table Herbicide Operations QUICK REFERENCE TABLE Target/Type of Control Optimum Herbicide Application Rate Comments Desired Treatment Period Complete control (bare ground) beneath Roundup PROMAX® Apply after ® 8 ounces + 1 ounce + guardrails, under delineators and + Escort XP + wildflowers seed around sign supports is not Guardrails, delineators, ® 1.33 ounces per acre st Outrider & before July 31 . recommended. Vista® XRT at the rate of mailboxes, signage 10 ounces per acre can be combined (removal of tall weeds) Roundup PROMAX® 8 ounces + 1.33 Can be applied with the three way or two way mixtures + Outrider® ounces per acre until October 15th. for the control of Giant Ragweed without the need of a surfactant. Roundup PROMAX® EsplAnade® 200 SC is replacing Edge of Pavement, 3 quarts per acre + ® with EsplAnade® 200 Landmark XP Add 2 ounces of (Bare Ground edge of 4 ounces per acre ® SC Landmark XP with 3 quarts of pavement application, March through Roundup PROMAX® to provide short no more than 6 inches October term control of edges and 3 ounces for Roundup PROMAX® 3 quarts per acre + from edge of road extended control of vegetation in Edge with Landmark® XP 2-3 ounces per acre ® surface) of Pavement. Do not use Landmark XP if the wind is above 10 MPH. Spot treatment during growing 1.5 % Solution Apply while Switchgrass Roundup PROMAX® season. actively growing 25 % Solution Rotowiper® application. ® Fixture or Flex-5. For use in Bahiagrass Roundup PROMAX 8 ounces + 1.33 ® ® areas. Do not use Outrider after + Outrider ounces per acre October 15th. Fixture or Flex-5 booms. In areas of Roundup PROMAX® 8 ounces + 1 ounce + good wildflowers, do not continue use of + Escort® XP + Escort® XP in wide patterns (overspray) ® 1.33 ounces per acre st ® Outrider Early boot to early after July 31 and Outrider after Johnsongrass Control th seedhead October 15 . 1.33 ounces per acre Fixture or Flex-5. Where Roundup ® ® + 2 qts. surfactant PROMAX brownout has been a Outrider ® per 100 gallons of problem. Do not use Outrider after th water October 15 . 2 parts water, 1 part Roundup PROMAX® Ropewick. chemical Roadside Vegetation Management 105 TxDOT 2018 Herbicide Operations QUICK REFERENCE TABLE (cont.) Target/Type of Control Optimum Herbicide Application Rate Comments Desired Treatment Period Hard to Control 1.5 quarts per acre Apply while Temp needs to be at least 85º. Target® 6.6 Two applications, 30-60 days Johnsongrass + ½ % Surfactant active growing apart are needed. Apply while Spot treatment during growing Roundup 1.5 % Solution Guinea Grass actively growing season. PROMAX® 16 ounces per acre Fixture or Flex-5 booms. Roundup Spot treatment during growing 1.5 % Solution PROMAX® season. Apply while Overspray with Roundup Itchgrass Roundup ® ® 12 ounces plus 4 ounces actively growing PROMAX at 12 ounces plus PROMAX + ® ® per acre EsplAnade 200 SC at 2 ounces EsplAnade 200 SC per acre. Flex-5 or Turbo-Drop. Wildoats or Jointed Roundup 10 ounces per acre Late March Spray before seed mature. Goatgrass PROMAX® Riprap, Paved Roundup 3 quarts per acre Overspray Operations. Medians, Raised ® PROMAX 1.5 % Solution Medians and Retaining Year Round Handgun Operations 4 oz per 100 plus 3 quarts Walls EsplAnade® 200 SC (Bare Ground) Roundup PROMAX® Aquatic Vegetation Approved Aquatic When vegetation 8 quarts per 100 gallons of Handgun operations. Add (standing or running Herbicide (54% is actively surfactant at the rate of 2 water water present) Glyphosate) growing quarts/100 gallons of water. Fixture or Flex-5 boom. Apply 10 fluid ounces per acre Late Spring / before plants mature. Do not use Sunflower Transline® ® Early Summer Transline after July 31st. 10 fl ounces per 100 gallons Handgun operations. Fixture or Flex-5 boom. Do not 10 fluid ounces per acre. ® Musk Thistle Transline® Early Spring use Transline after July 31st. 10 fl ounces per 100 gallons. Handgun operations. Roadside Vegetation Management 106 TxDOT 2018 Herbicide Operations QUICK REFERENCE TABLE (cont.) Optimum Target/Type of Control Herbicide Application Rate Treatment Comments Desired Period Fixture or Flex-5 spray boom. Apply before plants mature. 10 fluid ounces per acre + 2 qts. Vista® XRT can be combined with the Giant Ragweed surfactant per 100 gallons of water Late Spring / three way or two way mixtures without Vista® XRT (Bloodweed) Early Summer the need of a surfactant. Do not use Vista® XRT in the ROW after July 31st. 10 fl ounces per 100 gallons + 2 qts. Handgun operations. Do not use Vista® surfactant per 100 gallons of water XRT in the ROW after July 31st. 10 fluid ounces per acre Add ® Kochia Vista XRT surfactant at the rate of 2 qts. per 100 When gallons of water. vegetation is Fixture or Flex-5 boom. Do not use 10 fluid ounces per acre + actively Vista® XRT in the ROW after July 31st. Vista® XRT + Russian Thistle 1 ounce per acre + 2 qts. of surfactant growing Escort® XP per 100 gallons of water. Overspray operations with Flex-5 boom. 21 oz/ac + 2 qts. surfactant per 100 Mid-Summer / Mesquite & Huisache Transline® Do not use Transline® after October gallons of water Early Fall 15th. Mesquite & Huisache, Transline® - ½% + Mid-Summer / Use low volume X6 tip. 25 gallon Poly Transline® Low Volume Foliar Spray 2 qts. surfactant /100 gallons of water Early Fall Tank with 12 volt electric pump 10 ounces per acre + 2 qts. surfactant Mid-Summer / Do not use if wind exceeds 10 miles per Huisache Streamline® per 100 gallons of water. Early Fall hour June- Field Bindweed 1 ounce per acre September Spray when 2-3 Common Sunflower 1 ounce per acre feet in height Add surfactant at the rate of ¼% (1 Western Bitterweed 1 ounce per acre March-April quart per 100 gallons of water). Do not ® ® st Escort XP February- use Escort XP after July 31 . Turnip Weed 1 ounce per acre March African Rue 3 ounce per acre September 1 ounce per acre June- All Other Applications; see above Morning Glory Vine 2 ounce per acre September Cable Fence Applications; see above Roadside Vegetation Management 107 TxDOT 2018 Herbicide Operations QUICK REFERENCE TABLE (cont.) Target/Type of Control Optimum Herbicide Application Rate Comments Desired Treatment Period Rate to be added to two-way, three-way or four-way mixture. Other Broadleaf Weeds Escort® XP 1 ounce per acre May-July 31st Overspray use. ). Do not use Escort® XP after July 31st. Chemical Pruning (overhanging trees and 6 pints per acre When vegetation Overspray operations with Flex- 5 boom. Used for chemically brush encroaching on Capstone® + 2 quarts surfactant per 100 is actively pruning overhanging trees and right-of-way or covering gallons of water growing brush. roadway signage) Chemical Pruning in 6 pints per acre + 10 ounces When vegetation Overspray operations with Flex- areas where there are a Capstone® + per acre 5 boom. Used for chemically is actively lot of undergrowth and Vista® XRT + 2 quarts surfactant per 100 pruning overhanging trees and growing Hackberry trees gallons of water brush. Year Around Cone Jet #5500 X2 nozzle (Fall least Brush * required. Spray lower 12”-15” of Pathfinder II® Basal Bark Treatment preferable-As stem. Complete coverage (Mesquite, Huisache, etc) long as ground is required. Do not spray to point NOT frozen) of runoff. *Optional Basal Bark and cut stump applications with Pathfinder II® can be used at any time during the year, as long as ground is not frozen. 21 fluid ounces per acre When vegetation Kudzu *** Transline® + 2 quarts surfactant per 100 is actively Handgun operations. gallons of water growing Approved 8 quarts per 100 gallons Georgia Cane or Aquatic September - + 2 quarts surfactant per 100 Handgun operations. Giant Reed Herbicide (54% October gallons of water Glyphosate) ***Please Note: Transline® at 21 ounces per acre is the maximum use rate per year. Kudzu is a very aggressive vine and additional treatments will need to be planned and scheduled for future years to gain total eradication of this noxious weed. Roadside Vegetation Management 108 TxDOT 2018 .
Recommended publications
  • Lesson 1: Length English Vs
    Lesson 1: Length English vs. Metric Units Which is longer? A. 1 mile or 1 kilometer B. 1 yard or 1 meter C. 1 inch or 1 centimeter English vs. Metric Units Which is longer? A. 1 mile or 1 kilometer 1 mile B. 1 yard or 1 meter C. 1 inch or 1 centimeter 1.6 kilometers English vs. Metric Units Which is longer? A. 1 mile or 1 kilometer 1 mile B. 1 yard or 1 meter C. 1 inch or 1 centimeter 1.6 kilometers 1 yard = 0.9444 meters English vs. Metric Units Which is longer? A. 1 mile or 1 kilometer 1 mile B. 1 yard or 1 meter C. 1 inch or 1 centimeter 1.6 kilometers 1 inch = 2.54 centimeters 1 yard = 0.9444 meters Metric Units The basic unit of length in the metric system in the meter and is represented by a lowercase m. Standard: The distance traveled by light in absolute vacuum in 1∕299,792,458 of a second. Metric Units 1 Kilometer (km) = 1000 meters 1 Meter = 100 Centimeters (cm) 1 Meter = 1000 Millimeters (mm) Which is larger? A. 1 meter or 105 centimeters C. 12 centimeters or 102 millimeters B. 4 kilometers or 4400 meters D. 1200 millimeters or 1 meter Measuring Length How many millimeters are in 1 centimeter? 1 centimeter = 10 millimeters What is the length of the line in centimeters? _______cm What is the length of the line in millimeters? _______mm What is the length of the line to the nearest centimeter? ________cm HINT: Round to the nearest centimeter – no decimals.
    [Show full text]
  • Land Measurement in England, I I5O-135O
    Land Measurement in England, I I5O-135o By ANDR.EWJONES I sometimes in considerable detail, and they mr.r. land measurement in England in often emphasize the close link between land the Middle Ages has attracted much measurement and taxation. 5 This can be seen W attention, it has not altogether escaped most clearly in some of the earliest surviving some of the more fantastic speculations which surveys, and particularly so in Domesday Book, have dogged the study of historical metrology. 2 in which demesnes are described in terms of In recent years, work on the demesne economy hides and virgates. 6 While sonle surveys and and on village plans and planning has begun to extents describe the sort of acre used on the establish a sotmd basis for a review of land demesne, others do not, leaving us the problem measurement, but the subject still remains one of disentangling fiscal acres from conventional surrotmded by difficulties. 3 Most of these arise acres and measured acres. Having described the quite simply from the great amount of infor- demesne, sm'veys and extents then proceed to mation scattered throughout monastic cartu- list the holdings of the manorial tenants, again laries, manorial archives, and other sources, in terms which often produce the same dif- much of which appears both confused and con- ficulties as their treatment of the demesne. The fusing. The problem of handling this evidence evidence of charters is usually very different is exacerbated by the different purposes for from that of account rolls and surveys and which our main sources--account rolls, surveys extents.
    [Show full text]
  • Useful Forestry Measurements Acre: a Unit of Area Equaling 43,560
    Useful Forestry Measurements Acre: A unit of area equaling 43,560 square feet or 10 square chains. Basal Area: The area, usually in square feet, of the cross-section of a tree stem near its base, generally at breast height and inclusive of bark. The basal area per acre measurement gives you some idea of crowding of trees in a stand. Board Foot: A unit of area for measuring lumber equaling 12 inches by 12 inches by 1 inch. Chain: A unit of length. A surveyor’s chain equals 66 feet or 1/80-mile. Cord: A pile of stacked wood measuring 4 feet by 4 feet by 8 feet when originally conceived. Cubic Foot: A unit of volume measure, wood equivalent to a solid cube that measures 12 inches by 12 inches by 12 inches or 1,728 cubic inches. Cunit: A volume of wood measuring 3 feet and 1-1/2 inches by 4 feet by 8 feet and containing 100 solid cubic feet of wood. D.B.H. (diameter breast height): The measurement of a tree’s diameter at 4-1/2 feet above the ground line. M.B.F. (thousand board feet): A unit of measure containing 1,000 board feet. Section: A unit of area containing 640 acres or one square mile. Square Foot: A unit of area equaling 144 square inches. Township: A unit of land area covering 23,040 acres or 36 sections. Equations Cords per acre (based on 10 Basal Area Factor (BAF) angle gauge) (# of 8 ft sticks + # of trees)/(2 x # plots) Based on 10 Basal Area Factor Angle Gauge Example: (217+30)/(2 x 5) = 24.7 cords/acre BF per acre ((# of 8 ft logs + # of trees)/(2 x # plots)) x 500 Bd ft Example: (((150x2)+30)/(2x5))x500 = 9000 BF/acre or
    [Show full text]
  • Download Metric Conversion Factors
    Metric Conversion Factors Imperial Units Factor Metric Units Imperial Units Factor Metric Units LENGTH oz./acre 70 g/ha inches 2.5 centimeters (cm) lb./acre 1.12 kg/ha feet 30 centimeters (cm) bu./acre 0.9 hL/ha feet 0.3 meters (m) tons/acre 2.24 t/ha yards 0.9 meters (m) fl.oz./acre 70 mL/ha miles 1.6 kilometers (km) pt./acre 1.4 L/ha qt./acre 2.8 L/ha AREA gal./acre 11.2 L/ha square inches 6.5 square centimeters (cm2) gal./acre (US) 9.35 L/ha square feet 0.09 square meters (m2) plants/acre 2.47 plants/ha acres 0.40 hectacres (ha) oz./gal. 6.2 mL/L lb/gal. .01 kg/L VOLUME oz./sq.ft. 305 g/m2 cubic inches 16 cubic centimeters (cm3) lb./sq.ft. 4.9 kg/m2 cubic feet 0.03 cubic meters (m3) oz./ft.row 93 g/m row cubic yards 0.8 cubic meters (m3) lb./ft.row 1.5 kg/m row fluid ounces 28 milliliters (mL) ft./sec. 0.3 m/s pints 0.57 liters (L) m.p.h. 1.6 km/h quarts 1.1 liters (L) p.s.i. 6.9 kPa gallons (imperial) 4.5 liters (L) gallons (US) 3.75 liters (L) To convert from imperial to metric, multiply by the conversion factor. bushels 0.36 hectoliters (hL) For example: 10 inches x 2.5 = 25 centimeters To convert from metric to imperial, divide by the conversion factor.
    [Show full text]
  • Hops on a Quarter-Acre
    EC3026 Hops on a Quarter- Acre Stacy A. Adams, Associate Professor of Horticulture Figure 1. Quarter- acre hop trellising with “V” style training of hop Figure 2. Quality trellis supplies will provide a long- lasting hop trellis plants. system. This publication presents information on how to develop a is one such crop that has received much attention through quarter- acre hop yard, suitably sized to explore the unique the media, given consumer interest in craft and home beer production methods associated with this specialty crop. Farmers brewing. Experienced farmers, gardeners, and everyday interested in growing hops should gain knowledge about hop “beer enthusiasts” want to grow hops as they see the potential plant growth and development, its culture, common pests and for income. This crop is unique in its growth, cultivation, diseases, and harvest considerations. Using information in this harvest, and ultimately its post- harvest handling. Interested publication, farmers should be able to experiment with hop growers should start by experimenting with a small number production and harvesting so that they can develop a measured of hop plants, so they can better understand plant growth and vision for future production opportunities. cultivation before expanding to commercial production. Introduction Trellising Farmers are seeking ways to improve farm income Hop cultivars grown commercially are typically trained through the production of high- value specialty crops. Hop on a tall trellis system 18– 20 feet above the ground. The trellis © The Board of Regents of the University of Nebraska. All rights reserved. 1 center within the row, having 12 plants positioned between each pole within rows and a total of 48 plants per row.
    [Show full text]
  • Weights and Measures Standards of the United States—A Brief History (1963), by Lewis V
    WEIGHTS and MEASURES STANDARDS OF THE UMIT a brief history U.S. DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS NBS Special Publication 447 WEIGHTS and MEASURES STANDARDS OF THE TP ii 2ri\ ii iEa <2 ^r/V C II llinCAM NBS Special Publication 447 Originally Issued October 1963 Updated March 1976 For sale by the Superintendent of Documents, U.S. Government Printing Office Wash., D.C. 20402. Price $1; (Add 25 percent additional for other than U.S. mailing). Stock No. 003-003-01654-3 Library of Congress Catalog Card Number: 76-600055 Foreword "Weights and Measures," said John Quincy Adams in 1821, "may be ranked among the necessaries of life to every individual of human society." That sentiment, so appropriate to the agrarian past, is even more appropriate to the technology and commerce of today. The order that we enjoy, the confidence we place in weighing and measuring, is in large part due to the measure- ment standards that have been established. This publication, a reprinting and updating of an earlier publication, provides detailed information on the origin of our standards for mass and length. Ernest Ambler Acting Director iii Preface to 1976 Edition Two publications of the National Bureau of Standards, now out of print, that deal with weights and measures have had widespread use and are still in demand. The publications are NBS Circular 593, The Federal Basis for Weights and Measures (1958), by Ralph W. Smith, and NBS Miscellaneous Publication 247, Weights and Measures Standards of the United States—a Brief History (1963), by Lewis V.
    [Show full text]
  • Metric System Conversion Factors1 J
    AGR39 Metric System Conversion Factors1 J. Bryan Unruh, Barry J. Brecke, and Ramon G. Leon-Gonzalez2 Area Equivalents 1 Hectare (ha) 2 1 Acre (A) = 10,000 square meters (m ) 2 = 100 are (a) = 43,560 square feet (ft ) = 2.471 acres (A) = 4,840 square yards (yd2) = 0.405 hectares (ha) 1 Square Foot (ft) = 160 square rods (rd2) 2 = 4,047 square meters (m2) = 144 square inches (in ) = 929.03 square centimeters (cm2) 2 1 Acre-inch (ac-in) = 0.0929 square meters (m ) 3 = 102.8 cubic meters (m ) 1 Square Mile (mi) = 27,154 gallons, US (gal) 2 = 3,630 cubic feet (ft3) = 27,878,400 square feet (ft ) = 3,097,600 square yards (yd2) 2 1 Are (a) = 640 square acres (A ) = 2,589,988.11 square meters (m2) = 100 square meters (m2) 2 = 119.6 square yards (yd ) 1 Square Rod (rd) = 0.025 acre (A) = 39,204 square inches (in2) = 272.25 square feet (ft2) 1 Cubic Foot (ft) 2 3 = 30.25 square yards (yds ) = 1,728 cubic inches (in ) = 25.3 square meters (m2) = 0.037 cubic yards (yds3) 3 = 0.02832 cubic meters (cm ) 1 Square Yard (yd) = 28,320 cubic centimeters (cm3) = 9 square feet (ft2) 2 1 Cubic Yard (yd) = 0.836 square meters (m ) = 27 cubic feet (ft3) = 0.764 cubic meters (m3) 1. This document is AGR39, one of a series of the Environmental Horticulture Department, UF/IFAS Extension. Original publication date November 1993. Revised December 2014. Reviewed December 2017. Visit the EDIS website at http://edis.ifas.ufl.edu.
    [Show full text]
  • English Customary Weights and Measures
    English Customary Weights and Measures Distance In all traditional measuring systems, short distance units are based on the dimensions of the human body. The inch represents the width of a thumb; in fact, in many languages, the word for "inch" is also the word for "thumb." The foot (12 inches) was originally the length of a human foot, although it has evolved to be longer than most people's feet. The yard (3 feet) seems to have gotten its start in England as the name of a 3-foot measuring stick, but it is also understood to be the distance from the tip of the nose to the end of the middle finger of the outstretched hand. Finally, if you stretch your arms out to the sides as far as possible, your total "arm span," from one fingertip to the other, is a fathom (6 feet). Historically, there are many other "natural units" of the same kind, including the digit (the width of a finger, 0.75 inch), the nail (length of the last two joints of the middle finger, 3 digits or 2.25 inches), the palm (width of the palm, 3 inches), the hand (4 inches), the shaftment (width of the hand and outstretched thumb, 2 palms or 6 inches), the span (width of the outstretched hand, from the tip of the thumb to the tip of the little finger, 3 palms or 9 inches), and the cubit (length of the forearm, 18 inches). In Anglo-Saxon England (before the Norman conquest of 1066), short distances seem to have been measured in several ways.
    [Show full text]
  • Conversion of Units of Measurement
    2017 South Florida Environmental Report – Volume I Conversion of Units of Measurement CONVERSION OF UNITS OF MEASUREMENT METRIC TO UNITED STATES CUSTOMARY UNITS Metric Unit Symbol United States Unit Symbol Equivalency centimeter cm inches 1 cm = 0.394 inches cubic meter m3 acre-foot a ac-ft 1 m3 = 0.00081 ac-ft cubic meter per second m3 cubic foot per second cfs 1 m3 = 35.3147 cfs degrees Celsius ° C degrees Farenheit ° F 32 ° F = 0 ° C gram g ounce oz 1 g = 0.035 oz hectare ha acre ac 1 ha = 2.471 ac kilogram kg pound lb 1 kg = 2.205 lb kilometer km mile 1 km = 0.6214 mile liter L quart qt 1 L = 1.057 qt meter m foot ft 1 m = 3.28 ft metric ton (1,000 kg) t or mt b pound lb 1 t = 2,205 lb microgram µg ounce oz 1 µg = 3.5 x 106 oz milligram mg ounce oz 1 mg = 3.5 x 105 oz milliliter mL fluid ounce oz 1 mL = 0.0338 oz millimeter mm inches 1 mm = 0.0394 inches nanograms ng ounces oz 1 ng = 3.5274 e-11 oz square kilometer km2 square mile 1 km2 = 0.386 square mile a. An acre-foot (ac-ft) is the volume of liquid required to cover 1 acre to a depth of 1 foot (1 acre-foot = 43,560 cubic feet). This United States customery unit of measure is commonly used to express large volumes of water throughout the SFER, while related data may be stated in metric units.
    [Show full text]
  • Measurement Benchmarks
    Lesson 12.1 Name Reteach Measurement Benchmarks You can use benchmarks to estimate measurements. The chart shows benchmarks for customary units of measurement. Benchmarksarks forfor SomeSom Customary Units CUP 1 ft 1 yd about 1 about 1 about 1 about 1 about 1 about 1 foot yard cupcup gallon ounce pound Here are some more examples of estimating with customary units. • The width of a professional football is about 1 foot . • A large fish bowl holds about 1 gallon of water. • A box of cereal weighs about 1 pound . The chart shows benchmarks for metric units of measurement. Benchmarks for Some Metric Units about about about about about about 1 centimeter 1 meter 1 milliliter 1 liter 1 gram 1 kilogram Here are some more examples of estimating with metric units. • The width of a large paper clip is about 1 centimeter . • A pitcher holds about 1 liter of juice. • Three laps around a track is about 1 kilometer . Use benchmarks to choose the customary unit you would use to measure each. 1. length of a school bus 2. weight of a computer Use benchmarks to choose the metric unit you would use to measure each. 3. the amount of liquid a bottle of 4. distance between two cities detergent holds Chapter Resources 12-5 Reteach © Houghton Mifflin Harcourt Publishing Company Lesson 12.1 Name Measurement Benchmarks Measurement and Data— Essential Question How can you use benchmarks to understand 4.MD.A.1 the relative sizes of measurement units? MATHEMATICAL PRACTICES MP1, MP5 UnlockUnlock thethe ProblemProblem Jake says the length of his bike is about four yards.
    [Show full text]
  • Duracor Rate Card
    Application Instructions Guidelines for Spot Spraying DuraCor® Herbicide for a 3 Gallon Tank For example, you went through the calibration procedure and applied 40 fluid ounces in the measured area. Therefore, your spray volume is 40 GPA. Look at the chart on the left for the amount of mix in 1 gallon of water. Assume you want to apply 12 fluid ounces DuraCor® herbicide per acre; the amount listed for your volume (GPA), and the application rate is 9.0 cc. Multiply this by 3 for your 3 gallon tank, and you would need to measure 27 cc (with a syringe) for your 3 gallon mix. Or, since there are 5 cc in a teaspoon, this would be 5.4 teaspoons in your mix. Amount of DuraCor® herbicide (cc) Amount of DuraCor® herbicide (in fl oz) to mix in 1 gallon of water to mix in 20 gallons of water 12 fl oz/ 16 fl oz/ 12 fl oz/ 16 fl oz/ GPA acre acre GPA acre acre 20 18 24 20 12 16 30 12 16 30 8.0 10.7 40 9.0 12 40 6.0 8.0 50 7.2 9.6 50 4.8 6.4 60 6.0 8.0 60 4.0 8.0 70 5.1 6.9 70 3.4 4.6 80 4.5 6.0 80 3.0 4.0 90 4.0 5.3 90 2.7 3.6 100 3.6 4.8 100 2.4 3.2 Use a syringe to measure cc. After adding herbicide with the syringe flush with water.
    [Show full text]
  • Useful Conversions
    Useful Conversions Agronomic: · 1 acre-foot of soil = 2,000 tons (approximate @ 92 lbs/cu. ft.) · 1 lb per acre = 0.0104 grams per square foot · 100 lbs per acre = 0.2296 lbs per 100 square foot · 1 cubic feet per second = 448.8 gallons per minute · 1 lb = 16 ounces = 454 grams · 1 oz = 28.375 grams · 1 inch = 2.54 cm · 1 gallon = 3.78 liters · 1 ppm = 2 lbs/acre of soil 6" deep @ 92 lbs/cu. ft. · 1 ton per acre = 20.8 g per sq. ft. = 0.73 ounces/ sq. ft. · 1 ton per acre = 1 lb per 21.78 sq. ft. · 1 ton per acre = 4.59 lb per 100 sq. ft. · 1 gram per sq. ft. = 96 lbs per acre · 1 lb per acre = 1.12 kilograms per hectare · 1 lb per acre = 0.01042 grams per sq. ft. · 1 ton per acre = 1 kg per 48 sq. ft. · lbs per sq. ft. x 21.768 = tons per acre · lbs per sq. ft. x 43,560 = lbs per acre · 1 acre = 0.405 hectares · 1 mile = 1.61 km · parts per million (ppm) x 0.00136 = tons per acre-foot To convert a soil test from ppm to lbs per acre. 1. Determine the depth of soil in inches that the soil represents 2. Divide this depth by 3 3. Multiply the result by the soil test result Example: Soil test for nitrate is 9 ppm and sampled depth is 12” (12”/3 = 4, 4 x 9 = 36 lb/ac) Mathematics Chart: Multiply by To obtain Acres 43,560 Sq.
    [Show full text]