DOCSLIB.ORG

8920 Network Traffic Management Software System Overview Release 17.2

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
8920 Network Traffic Management Software System Overview Release 17.2 Network Traffic Management 8920 Network Traffic Management software System Overview Release 17.2 190-406-815 Issue 1.1 October 2011 Alcatel-Lucent - Proprietary This document contains proprietary information of Alcatel-Lucent and is not to be disclosed or used except in accordance with applicable agreements. Copyright © 2011 Alcatel-Lucent. Unpublished and not for publication. All rights reserved. This material is protected by the copyright and trade secret laws of the United States and other countries. It may not be reproduced, distributed, or altered in any fashion by any entity (either internal or external to Alcatel-Lucent), except in accordance with applicable agreements, contracts, or licensing, without the express written consent of Alcatel-Lucent and the business management owner of the material. Notice Every effort was made to ensure that the information in this document was complete and accurate at the time of printing. However, information is subject to change. Trademarks All trademarks and service marks specified herein are owned by their respective companies. Warranty Alcatel-Lucent provides a limited warranty to this product. Customer Notification The Alcatel-Lucent contract specifies your system configuration (e.g., capacities) and identifies the optional features you have purchased. The standard NTM Feature Set documentation contains information on all of the features available in the Release, including those you may not have purchased, which are thereby not available for use. Alcatel-Lucent will not support external use of the third-party software packages included in the NTM Feature Set. Acknowledgements We wish to acknowledge: The NTM product includes software developed by: Red Hat Enterprise Linux® - Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. APACHE TOMCAT - The Apache License, version 2.0 (http://www.apache.org/licenses/). APACHE ActiveMQ - The Apache License, version 2.0 (http://www.apache.org/licenses/). MOD AJP (APACHE Tomcat Connectors) - The Apache License, version 2.0 (http://www.apache.org/licenses/). Apache Xerces C++ - The Apache License, version 2.0 (http://www.apache.org/licenses/). Apache Axis2 - The Apache License, version 2.0 (http://www.apache.org/licenses/). Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the Apache Group for use in the Apache HTTP server project (http://www.apache.org/)." 4. The names "Apache Server" and "Apache Group" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected] 5. Products derived from this software may not be called "Apache" nor may "Apache" appear in their names without prior written permission of the Apache Group. 6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the Apache Group for use in the Apache HTTP server project (http://www.apache.org/)." THIS SOFTWARE IS PROVIDED BY THE APACHE GROUP ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE GROUP OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. MOD_SSL - Copyright (c) 1998-2004 Ralf S. Engelschall. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: This product includes software developed by Ralf S. Engelschall <[email protected]> for use in the mod_ssl project (http://www.modssl.org/). 4. The names "mod_ssl" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected]. 5. Products derived from this software may not be called "mod_ssl" nor may "mod_ssl" appear in their names without prior written permission of Ralf S. Engelschall. 6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by Ralf S. Engelschall <[email protected]> for use in the mod_ssl project (http://www.modssl.org/)." THIS SOFTWARE IS PROVIDED BY RALF S. ENGELSCHALL ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RALF S. ENGELSCHALL OR HIS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, Alcatel-Lucent - Proprietary See notice on first page. WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Bugzilla - Mozilla Foundation; License: http://creativecommons.org/licenses/by-sa/2.0/ CentOS - CentOS Project; Dom4J - DOM4J Project; License: http://www.dom4j.org/dom4j-1.6.1/license.html LDAP C SDK - Mozilla Foundation; License: http://www.mozilla.org/MPL/MPL-1.1.html mksh - Korn shell by David Korn; Distributed under BSD License. (https://www.mirbsd.org/htman/i386/man7/BSD-Licence.htm) ncurses - ncurses, GNU 5.5; Distributed under MIT + GPL2+ nmon - IBM nmon; License: http://www.gnu.org/copyleft/gpl.html PAM_RADIUS_AUTH - This module is a merger of an old version of pam_radius.c, and code which went into mod_auth_radius.c, with further modifications by Alan DeKok of CRYPTOCard Inc.. The original pam_radius.c code is copyright (c) Cristian Gafton, 1996, redhat.com> The additional code is copyright (c) CRYPTOCard Inc, 1998. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, and the entire permission notice in its entirety, including the disclaimer of warranties. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. ALTERNATIVELY, this product may be distributed under the terms of the GNU Public License, in which case the provisions of the GPL are required INSTEAD OF the above restrictions. (This clause is necessary due to a potential bad interaction between the GPL and the restrictions contained in a BSD- style copyright.) THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. JAVA JDK - Sun Microsystems Inc. Binary Code License Agreement (http://java.sun.com/j2se/1.5.0/jdk-1_5_0_12-license.txt). edtFTPj - Enterprise Distributed Technologies under LGPL License (http://www.gnu.org/licenses/lgpl.txt). Perl DBD - Perl DBD Copyright (c) 1994-2003 Tim Bunce, Ireland is used with permission. Distributions of the standard package can be found through the http://www.cpan.org website. Perl Convert::ASN1 - Perl DBD Copyright (c) 1994-2003 Tim Bunce, Ireland is used with permission. Distributions of the standard package can be found through
Load more

Recommended publications
  • Digital Switching Systems, I.E., System Testing and Accep- Tance and System Maintenance and Support
    SSyyed Riifffat AAlli DDiiggiittaall SSwwiittcchhiinngg SSyysstteemmss ((Syystemm Reliaabbiilliittyy aandd AAnnalysis) Bell Communications Research, Inc. Piscataway, New Jersey McGraw-Hill, Inc. New York • San Francisco • Washington, DC. Auckland • BogotA • Cara- cas • Lisbon • London Madrid • Mexico City • Milan • Montreal • New Delhi San Juan • Singapore • Sydney • Tokyo • Toronto 2 PREFACE The motive of this book is to expose practicing telephone engineers and other graduate engineers to the art of digital switching system (DSS) analysis. The concept of applying system analysis techniques to the digital switching sys- tems as discussed in this book evolved during the divestiture period of the Bell Operating Companies (BOCs) from AT&T. Bell Communications Research, Inc. (Bellcore), formed in 1984 as a research and engineering company support- ing the BOCs, now known as the seven Regional Bell Operating Companies (RBOCs), conducted analysis of digital switching system products to ascertain compatibility with the network. Since then Bellcore has evolved into a global provider of communications software, engineering, and consulting services. The author has primarily depended on his field experience in writing this book and has extensively used engineering and various symposium publications and advice from many subject matter experts at Bellcore. This book is divided into six basic categories. Chapters 1, 2, 3, and 4 cover digital switching system hardware, and Chaps. 5 and 6 cover software ar- chitectures and their impact on switching system reliability. Chapter 7 primarily covers field aspects of digital switching systems, i.e., system testing and accep- tance and system maintenance and support. Chapter 8 covers networked aspects of the digital switching system, including STf SCP, and AIN.
    [Show full text]
  • In What Way Is Stored Program Control (SPC) Superior to Hardwired Control?
    TELECOMMUNICAIONS SWITCHING SYSTEMS AND NETWORKS 1. How are switching systems classified? In what way is stored program control (SPC) superior to hardwired control? ELECTRO MECHANICAL SWITCHING SYSTEM Limited capability Virtually impossible to modify them to provide additional functionalities. 1. STROWGER/ STEP BY STEP SYSTEM Control functions are performed by circuits associated with the switching elements in the system. 2. CROSSBAR SYSTEM Have hard-wired control sub-systems which use relays and latches. ELECTRONIC SWITCHING SYSTEMS Control functions are performed by a computer or a processor; Also called stored program control (SPC) system. 1. SPACE DIVISION SWITCHING A dedicated path is established between the calling and the called subscriber for the entire duration of the call. Technique used in Strowger and crossbar systems. 2. TIME DIVISON SWITCHING Sampled values of speech signals are transferred at fixed intervals; May be analog or digital. A. ANALOG SWITCHING - The sampled voltage levels are transmitted as they are. B. DIGITAL SWITCHING - The sampled voltage levels are binary and transmitted. SPACE SWITCHING - If the coded values are transferred during the same time interval from input to output. TIME SWITCHING - If the values are stored and transferred to the outputat a later time interval. COMBINATION SWITCHING - Combination of time and space switching. STORED PROGRAM CONTROL HARDWIRED CONTROL Features properties changed through programming, It requires physical changes to wiring, which can be done in PBX system remotely. strapping etc which means it cannot be done remotely. Do not require gthat much of space and do not Equipments require more space & constant adjustment require constant adjustment and cleaning. and cleaning.
    [Show full text]
  • Switching Relations: the Rise and Fall of the Norwegian Telecom Industry
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by NORA - Norwegian Open Research Archives Switching Relations The rise and fall of the Norwegian telecom industry by Sverre A. Christensen A dissertation submitted to BI Norwegian School of Management for the Degree of Dr.Oecon Series of Dissertations 2/2006 BI Norwegian School of Management Department of Innovation and Economic Organization Sverre A. Christensen: Switching Relations: The rise and fall of the Norwegian telecom industry © Sverre A. Christensen 2006 Series of Dissertations 2/2006 ISBN: 82 7042 746 2 ISSN: 1502-2099 BI Norwegian School of Management N-0442 Oslo Phone: +47 4641 0000 www.bi.no Printing: Nordberg The dissertation may be ordered from our website www.bi.no (Research - Research Publications) ii Acknowledgements I would like to thank my supervisor Knut Sogner, who has played a crucial role throughout the entire process. Thanks for having confidence and patience with me. A special thanks also to Mats Fridlund, who has been so gracious as to let me use one of his titles for this dissertation, Switching relations. My thanks go also to the staff at the Centre of Business History at the Norwegian School of Management, most particularly Gunhild Ecklund and Dag Ove Skjold who have been of great support during turbulent years. Also in need of mentioning are Harald Rinde, Harald Espeli and Lars Thue for inspiring discussion and com- ments on earlier drafts. The rest at the centre: no one mentioned, no one forgotten. My thanks also go to the Department of Innovation and Economic Organization at the Norwegian School of Management, and Per Ingvar Olsen.
    [Show full text]
  • Telecommunication Switching Networks
    TELECOMMUNICATION SWITCHING AND NETWORKS TElECOMMUNICATION SWITCHING AND NffiWRKS THIS PAGE IS BLANK Copyright © 2006, 2005 New Age International (P) Ltd., Publishers Published by New Age International (P) Ltd., Publishers All rights reserved. No part of this ebook may be reproduced in any form, by photostat, microfilm, xerography, or any other means, or incorporated into any information retrieval system, electronic or mechanical, without the written permission of the publisher. All inquiries should be emailed to [email protected] ISBN (10) : 81-224-2349-3 ISBN (13) : 978-81-224-2349-5 PUBLISHING FOR ONE WORLD NEW AGE INTERNATIONAL (P) LIMITED, PUBLISHERS 4835/24, Ansari Road, Daryaganj, New Delhi - 110002 Visit us at www.newagepublishers.com PREFACE This text, ‘Telecommunication Switching and Networks’ is intended to serve as a one- semester text for undergraduate course of Information Technology, Electronics and Communi- cation Engineering, and Telecommunication Engineering. This book provides in depth knowl- edge on telecommunication switching and good background for advanced studies in communi- cation networks. The entire subject is dealt with conceptual treatment and the analytical or mathematical approach is made only to some extent. For best understanding, more diagrams (202) and tables (35) are introduced wherever necessary in each chapter. The telecommunication switching is the fast growing field and enormous research and development are undertaken by various organizations and firms. The communication networks have unlimited research potentials. Both telecommunication switching and communication networks develop new techniques and technologies everyday. This book provides complete fun- damentals of all the topics it has focused. However, a candidate pursuing postgraduate course, doing research in these areas and the employees of telecom organizations should be in constant touch with latest technologies.
    [Show full text]
  • Introduction to Telecommunication Network
    Pilsung Taegyun AB A Fathur Afif Hari Gary Dhika April Mulya Yusuf AB A A A AB AB AB AB Anin Rizka A B Dion Siska Mirel Hani Airita AB AB AB AB AB www.telkomuniversity.ac.id Stored Program Control Course Number : TTH2A3 CLO : 3 Week : 8 www.telkomuniversity.ac.id Media Gateway on NGN • Media Gateway (MG) – On Transport plane that connects different type of network – Trunk Gateway, connects packet-based network with trunk network from PSTN or ISDN – Access Gateway, provides services to CPE – Residential Gateway, connects packet-based network with analog network • Signaling Gateway (SG) – Transforming signaling format, ex. SIP SS7 • Media Gateway Controller (MGC) – Control Media Gateway and Signaling Gateway – aka. Soft Switch (call setup for multimedia communication, detect and manage events, and manage media gateway based on configuration) – Use MGCP (MGC Protocol) from ITU-T or Megaco from IETF www.telkomuniversity.ac.id Layers in NGN 4 www.telkomuniversity.ac.id Crossbar Switch • Electro-mechanical switch by using relay contact • Numbers are stored in register to establish a call by activating several relay. This activation is done by marker • Marker will become SPC (Stored Program Control) www.telkomuniversity.ac.id Unit Interface for Digital SPC www.telkomuniversity.ac.id What is SPC? SPC (Stored program control) is: • a telecommunications technology used for telephone exchanges • controlled by a computer program stored in the memory of the switching system • SPC was the enabling technology of electronic switching systems (ESS) developed
    [Show full text]
  • Intelligent Network Services
    Next Generation Network Services Neill Wilkinson Copyright q 2002 John Wiley & Sons, Ltd ISBNs: 0-471-48667-1 (Hardback); 0-470-84603-8 (Electronic) 10 Intelligent Network Services 10.1 INTRODUCTION In Part 1 of this book, we examined the functional and physical character- istics of circuit switched based Intelligent Networks (INs). In this chapter, we are going to explore what these elements do by way of offering services to customers and giving carriers a flexible means of delivering new services. The IN service model was the first step to releasing service control from the hands of switch manufacturers and as such presented telecoms opera- tors with a new vehicle for realising services that enhanced the basic call control capabilities of stored program control switches. We see that this is not the end of the story for enhanced service platforms as the move to remove the final block to enhanced services, the close coupling of the stored program controller and the switch fabric, to release the potential of software driven services on packet networks. Just to refresh the reader on INs. They rely on the decoupling of a number of telephone switch functions from the stored program controller, renamed a Service Switch Point (SSP) in the IN architecture. The functions left behind in the SSP are called the Basic Call State Model (BCSM). The functions separated out are incorporated into a centralised service execu- tion environment as a Service Independent Building Block (SIB) called the Basic Call Processing (BCP) function. The services, constructed from SIBs to form a Service Logic Program (SLP), run inside this environment called the Service Logic Execution Environment (SLEE), inside a physical plat- form called the Service Control Point (SCP).
    [Show full text]
  • 5ESS 5 Electronic Switching System (Class 5 Switch)
    4ESS 4 Electronic Switching System (Class 4 switch) #5ESS 5 Electronic Switching System (Class 5 switch) 0 or 0- Zero Minus Dialing 0+ Zero Plus Dialing 0++ Zero Plus Plus Dialing 00+ or 00- Double Zero Dialing 1+ One Plus Dialing 100BASE-T Official project name for 100 Mb/s Fast Ethernet 100BASE-T4 100 Mb/s Fast Ethernet using 4-pair Category 3 cable 100BASE-TX 100 Mb/s Fast Ethernet using 2-pair Category 5 cable 100BT 100Base-T Ethernet 100VG-ANY LAN 100 Mb/s LAN using Demand Priority Protocol originally developed by Hewlett Packard and AT&T for Category 3 cable 10BASE-FL An implementation of the Institute of Electrical and Electronic Engineers (IEEE) Ethernet standard on 62 5/125-µm fiber optic cable, a baseband medium of 10 Mbps 10BASE-T An implementation of the Institute of Electrical and Electronic Engineers (IEEE) Ethernet standard on 24-AWG, unshielded, twisted-pair wiring, a baseband medium of 10 Mbps 10BASE2 An implementation of the Institute of Electrical and Electronic Engineers (IEEE) Ethernet standard on thin coaxial cable, a baseband medium of 10 Mbps The maximum segment length is just under 200m (656ft) 10BASE5 An implementation of the Institute of Electrical and Electronic Engineers (IEEE) Ethernet standard on twin axial cable, a baseband medium of 10 Mbps The maximum segment length is 500m (1,640ft) 10GbE 10 Gigabit Ethernet 1G 1st Generation wireless 2.5G 2 5 Generation wireless 2.75G 2 75 Generation wireless; humorous nickname for EDGE 23B + D 23 Bearer + 1 Delta Channels 281Q Two Binary, One Quaternary 2B + D 2 Bearer
    [Show full text]
  • An Introduction to the Technology of Intra- and Interexchange Area Telephone Networks
    NTI'A Report 83-118 An Introduction to the Technology of Intra- and Interexchange Area Telephone Networks M. Nesenbergs F? M. McManamon u.s. DEPARTMENT OF COMMERCE Malcom Baldrige, Secretary Susan G. Stuebing, Acting Assistant Secretary for Communications and Information March 1983 PREFACE The views, opinions, and/or findings contained in this report are those of the authors and should not be construed as an official U.S. Department of Commerce or National Telecom­ municationsand Information Administration policy or decision unless designated by other official documentation. Certain c.ommerci alequipment ,instruments , services, protocols, and materials are identified in this report to adequately specify the engineering issues. In no case does such identification inlply recommendation or endorsement by the National Telecommunications and Information Admin'istrat'ion, nor does it imply that the material, equipment, or service identified is necessarily the best available for the purpose. iii TABLE OF CONTENTS Page LIST OF FIGURES vi LIST OF TABLES vi i i GLOSSARY ix ABSTRACT 1 1. INTRODUCTION 1 2. THE PHYSICAL FACILITIES -- NETWORK BUILDING BLOCKS 2 2.1 Background 2 2.2 The Nominal Voice Path 4 2.3 The Main Physical Elements 17 3. THE TELECOMMUNICATION FUNCTIONS -- HIDDEN NETWORKS WITHIN THE NETWORK 33 3.1 Background 33 3.2 Centralized Automatic Message Accounting 34 3.3 Bell System Reference Frequency 36 3.4 Automated Intercept System 39 3.5 Traffic Service Position System 41 3.6 Signaling 41 3.7 Switch Operations Support Systems 50 3.8 Inward WATS 53 3.9 Private Line Networks 56 4. THE EXCHANGES AND EXCHANGE AREA -- OPERATING COMPANY TECHNOLOGY BOUNDARIES 58 5.
    [Show full text]
  • No. 1 ESS Section I
    BelllAboratories RECORD 228 Memory Devices R. H. Meinken and L. W. Stammerjohn Two magnetic memory devices, the permanent magnet twistor and the ferrite sheet, VIIlllm,' ;'.1 • Number 6 • June 1965 store the operating intelligence of the system. 236 The Switching Network A. Feiner A very flexible network, it is actually a cross between electromechanical and elec­ tronic, rather than fully electronic, techniques. Contents 241 Mechanical Design D. H. Wetherell Because its great flexibility stems from the stored progmm, No.1 ESS needs fewer equipment options than any present system. PAGE 246 Power System and Ringing and Tone Plants J. W. Osmun and J. R. Montana 194 Introduction W. A. Mill' N,ti,. Solid state devices help simplify the power system and lead to the introduction of Presentin!J an ;XXII,' '11/. III" No, 110:1''1'11'111/;,' S"';I"/,;II" S,/"",,,, ,/1,,111,,· If'rlmolo!lical precision dial tones and call progress tones. and scientific d;IIWl,';1I //'11;/'11 ;1//"'" /'/1/H"';I''''', 251 A New Approach to System Maintenance R. L. Campbell and W. Thomis 196 The Evolution of Telephone SwikhinJ( 11'. Kf'ilft,·,. Automatic maintenance programs comprise over half the contents of the stored pro­ 'I'f~'VoIIII;on Seemingly a ;11 11'/,,/,11111/" "/1"',.",,, . .VII, 1 1o:SS ;" 111'1111111" HilllfIl'tdy in the gram and make No.1 ESS a "do-it-yourself" machine. tradition of cmnmon ('/11/1,.,,1 H//';lrll;"1/ "/1",,.1/,,,. 257 Some Magnetic Materials D.H. Wenny 204 From Morris to Succa.~unn8 fl. W. Kl'lrhl,·,II/'· A new alloy was created whole cloth for the ferreed switch while two older ones got All the vast chant/"x XI'III/I'III;/lli III,! MII,.,.i" 11'",1 11'11/11 II,,· SIl/·'·I,..~lIuua office were an entirely new magnetic dress for the twistor memory.
    [Show full text]
  • June 1965 Edition of the Bell Laboratories Record
    Bell Laboratories RECORD Volume 49 Number 6 June 1965 Contents PAGE 194 Introduction W. A. Mac Nair Presenting an issue on the No. 1 Electronic Switching System and the technological and scientific climate in which it was conceived. 196 The Evolution of Telephone Switching W. Keister Seemingly a revolution in telephone systems, No. 1 ESS is actually squarely in the tradition of common control switching systems. 204 From Morris to Succasunna R. W. Ketchledge All the vast changes separating the Morris trial from the Succasunna office were made to enhance stored program control. 210 Features and Service J. J. Yostpille The stored program brings new services to Bell System customers and adds new flexibility to many traditional system features. 214 The Stored Program E. H. Siegel, Jr. and S. Silber Many functional programs, building blocks of the stored program, guide each step the system takes in processing calls and performing automatic maintenance. 222 The Control Unit A. H. Doblmaier The executive part of the system, it interprets instructions and data from the stores and generally keeps things running. G. C. Dacey, Chairman W. M. Bacon F. H. Blecher W. A. Cornell Editorial Board A. E. Joel, Jr. M. V. Mathews H. G. Och H. A. Stone Editorial Staff B. E. Strasser, Editor M. W. Nabut. Managing Editor G. L. Bromleigh, Jr., Assistant Editor J. C. Smith, Jr., Assistant Editor F. E. Piellusch, Art Editor T. N. Pope, Circulation Manager THE BELL LABORATORIES RECORD is published monthly by Bell Telephone Laboratories, Incorporated, 463 West Street, New York, N. Y. 10014, J.
    [Show full text]
  • Control of Switching Systems Unit 4 Lecture 1
    Control of Switching Systems Unit 4 Lecture 1 Table of Contents Introduction Call processing Functions Common Control Reliability, Availability and Security Stored Program Control Introduction Earlier electronic switching system was based on the stores program control (SPC) system in which temporary memory was used for storing different information. Digital systems employ multiprocessor subsystem for the best control. So software are necessary to implement the processing system for all of control structure. In digital switching systems, call processing functions are performed by using interface controllers. Different software system used for switching control are also explained along with the stored program control concept. Microprocessor is mostly used for controlling in the digital switching system to reduce the cost of call processing. Call Processing Functions It is similar to common control cross bar system except that the most of the functions are performed by software or by using interface controllers. Some of basic functions of call processing system are: ◦ Call identification ◦ Call routing ◦ Path setup between subscribers ◦ Call status ◦ billing ◦ Digital translation Generally call processing takes place independent of switching network. Sequence of operations: Sequence of operations (Cont.) Common control In this method there is no connection made until entire number is received. The number is stored in a memory and the information conveyed by the number is translated by the logic circuitry into instruction to switch contact mechanisms which then contact the appropriate connections. After establishing the connection, the logic circuitry is free to service other calls. So, subscriber handling capacity is much more. ◦ In step by step switching system there were disadvantages like for the entire call duration the whole set of switches including contacts and relay mechanisms are busy and are not available for servicing other calls.
    [Show full text]
  • TOPIC 2:SWITCHING INTRODUCTION 1.Strowger (Step-By-Step) Switching
    TOPIC 2:SWITCHING INTRODUCTION 1.Strowger (step-by-step) switching The Strowger switch, also known as Step-by-Step or SXS, is an early electromechanical telephone switching system invented by Almon Brown Strowger. It is a specialized version of a stepping switch. Step by Step Switching or Strowger switching was the first automatic telephone system introduced by Almon B. Strowger. This system uses selectors for switching. The selectors used in Strowger exchange are mainly of two types: 1. Uniselector 2. Two motion selector. Both the selectors belong to the same types of switches called rotary switches. UNISELECTOR This is called uniselector because the rotary motion of this switch is in one direction, i.e., the wiper assembly moves only in one direction. The uniselector consists of moving contacts called wipers. These are used to make electrical connections with any one of several contacts, called bank contacts, in an arc around it. The arc in most cases consists of ten steps. The wiper assembly is divided into three sets of wipers so that the switch has to turn through only one third of a full circle when operated. These wipers are operated by an electromagnet, called driving magnet, with the help of a ratchet and pawl mechanism. When current flows through the windings of the driving magnet, it is energised and attracts the armature; the pawl slips over one tooth of the ratchet wheel. The ratchet is prevented from movement in the reverse direction by a detent. When the current stops through the windings of the driving magnet, it is de-energised, and the armature comes back to its rest position.
    [Show full text]