Enlarger / Photogram Review Worksheet Photography 1 Ms. Brown Names Block Date

Total Page：16

File Type：pdf, Size：1020Kb

Enlarger / Photogram Review Worksheet Photography 1 Ms. Brown Names Block Date Find your enlarger partner and work as a team to fill out the following handout. 1. It is safe to have your photo paper out of the box/bag while you focus the enlarger light. a. True, photo paper is light sensitive but not THAT sensitive. b. False, photo paper is light sensitive and should never be left out or opened when any kind of white light is present in the darkroom or classroom, which is why you turn your timer OFF while you get out your paper. 2. Please explain why we make “test strips” in photography. 3. What should you consider for your photogram composition? a. Asymmetry b. Movement c. Full range of values including true black and true white d. Strong focal point e. All of the above 4. A PHOTOGRAM is also known as a RAYOGRAM named after the artist MAN RAY. a. True b. False 5. What is the difference between “focus” and “time” on your timer? Please explain. 6. What number enlarger are you assigned to? _____ 7. Find your assigned enlarger and write down the apertures (f-stops) from brightest to dimmest. (hint…apertures are located on the lens of your enlarger) BRIGHEST (2.8) ------------------------------------------------------------------- (32) DIMMEST 8. Turn your aperture (f/stop) to the brightest setting. Now set your aperture to f/8. How many clicks does it take to get to f/8 on YOUR enlarger? (This will vary depending on the brand of your enlarger) _______ BEFORE YOU BEGIN WORKING IN THE DARKROOM TODAY. Please show Ms. Brown your enlarger set to f/8, timer set to 5 seconds and enlarger light focused (light filling the glass with edges crisp and clear). While you are waiting to meet with Ms. Brown please sign up for a studio job (hung in the entry way of the darkroom). .

Copy Link

Recommended publications

Color Printing Techniques
4-H Photography Skill Guide Color Printing Techniques Enlarging Color Negatives Making your own color prints from Color Relations color negatives provides a whole new area of Before going ahead into this fascinating photography for you to enjoy. You can make subject of color printing, let’s make sure we prints nearly any size you want, from small ones understand some basic photographic color and to big enlargements. You can crop pictures for the visual relationships. composition that’s most pleasing to you. You can 1. White light (sunlight or the light from an control the lightness or darkness of the print, as enlarger lamp) is made up of three primary well as the color balance, and you can experiment colors: red, green, and blue. These colors are with control techniques to achieve just the effect known as additive primary colors. When you’re looking for. The possibilities for creating added together in approximately equal beautiful color prints are as great as your own amounts, they produce white light. imagination. You can print color negatives on conventional 2. Color‑negative film has a separate light‑ color printing paper. It’s the kind of paper your sensitive layer to correspond with each photofinisher uses. It requires precise processing of these three additive primary colors. in two or three chemical solutions and several Images recorded on these layers appear as washes in water. It can be processed in trays or a complementary (opposite) colors. drum processor. • A red subject records on the red‑sensitive layer as cyan (blue‑green). • A green subject records on the green‑ sensitive layer as magenta (blue‑red).
[Show full text]
A Curriculum Guide
FOCUS ON PHOTOGRAPHY: A CURRICULUM GUIDE This page is an excerpt from Focus on Photography: A Curriculum Guide Written by Cynthia Way for the International Center of Photography © 2006 International Center of Photography All rights reserved. Published by the International Center of Photography, New York. Printed in the United States of America. Please credit the International Center of Photography on all reproductions. This project has been made possible with generous support from Andrew and Marina Lewin, the GE Fund, and public funds from the New York City Department of Cultural Affairs Cultural Challenge Program. FOCUS ON PHOTOGRAPHY: A CURRICULUM GUIDE PART IV Resources FOCUS ON PHOTOGRAPHY: A CURRICULUM GUIDE This section is an excerpt from Focus on Photography: A Curriculum Guide Written by Cynthia Way for the International Center of Photography © 2006 International Center of Photography All rights reserved. Published by the International Center of Photography, New York. Printed in the United States of America. Please credit the International Center of Photography on all reproductions. This project has been made possible with generous support from Andrew and Marina Lewin, the GE Fund, and public funds from the New York City Department of Cultural Affairs Cultural Challenge Program. FOCUS ON PHOTOGRAPHY: A CURRICULUM GUIDE Focus Lesson Plans Fand Actvities INDEX TO FOCUS LINKS Focus Links Lesson Plans Focus Link 1 LESSON 1: Introductory Polaroid Exercises Focus Link 2 LESSON 2: Camera as a Tool Focus Link 3 LESSON 3: Photographic Field
[Show full text]
Download Product Catalog
PHOTOGRAPHIC EQUIPMENT Developing excellence for over 65 years 150 Years of Manufacturing Excellence The Charles Beseler Company was founded in 1869 as a manufacturer of a variety of products including inhalers, magic lanterns with oil lamps and stereopticons. By 1943 the company had become an innovative audio-visual company serving the military and education markets. In 1953, Beseler entered the amateur and professional photography fields with the development of the 45 Series Enlarger and other darkroom products. Today, the Charles Beseler Company continues to be the leading supplier of photographic darkroom equipment for the educational market. Proudly made in the USA, at a modern manufacturing facility in Stroudsburg, Pennsylvania, Beseler’s line of high-quality photographic equipment continues to withstand the test of time and remains the industry standard for professionals and amateurs alike. beseler.com NEW PRODUCT DESIGN AND INNOVATION. A BESELER TRADITION. Our team of experts is constantly working on engineering and manufacturing new products to meet your most challenging photographic needs. Check back on our website to discover the very latest Beseler products, parts and accessories in the coming months! From enlargers and light sources to copy stands and easels, Beseler offers the highest quality photographic equipment, all backed by an experienced sales and service team. See why photographers have trusted our products for generations. ENLARGERS 2-3 LIGHT SOURCES 4-5 EASELS 6 COPY STANDS 7 ACCESSORIES AND REPLACEMENT PARTS 8-9 800.237.3537 • beseler.com 1 ENLARGERS 23C III-XL Enlargers All 23C III-XL enlargers are built around the extra long and rigid twin girder construction which helps reduce vibrations while allowing print sizes larger than 16” x20” on the baseboard.
[Show full text]
The Production of Images Using Photographic Equipment and Serigraphy Charles Roger Banks Iowa State University
Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 1977 The production of images using photographic equipment and serigraphy Charles Roger Banks Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Advertising and Promotion Management Commons, Art and Design Commons, Marketing Commons, and the Public Relations and Advertising Commons Recommended Citation Banks, Charles Roger, "The production of images using photographic equipment and serigraphy " (1977). Retrospective Theses and Dissertations. 7969. https://lib.dr.iastate.edu/rtd/7969 This Thesis is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. The production of images using photographic equipment and serigraphy by Charles Roger Banks A Thesis Submitted to the Graduate Faculty in Partial Fulfillment of The Requirements for the Degree of MASTER OF ARTS Department: Applied Art Major: Applied Art (Advertising Design) Signatures have been redacted for privacy Iowa State University Ames, Iowa 1977 ii TABLE OF CONTENTS Page INTRODUCTION 1 EPITOME OF PHOTOGRAPHY 2 EPITOME OF SERIGRAPHY 8 THE INDIVIDUAL IMAGE ELEMENTS PRODUCED USING PHOTOGRAPHIC EQUIPMENT 14 INDIVIDUAL IMAGE ELEMENTS PRODUCED BY SERIGRAPHY 32 THE CREATIVE COMBINATION OF THE INDIVIDUAL IMAGE ELEMENTS 35 THE CREATIVE PIECES 36 SUMMARY 46a SELECTED BIBLIOGRAPHY 47 GLOSSARY 48 ACKNOWLEDGMENTS 49 1 INTRODUCTION This study was undertaken to investigate the character of visual images created by combining individual image elements produced using specific photographic equipment and serigraphy.
[Show full text]
Panoramic Cameras I Built Over the Years
PANORAMIC CAMERAS I'VE MADE Andrew Davidhazy, Imaging and Photographic Technology Rochester Institute of Technology My experiences with panoramic camera construction started in the late 1960's while still an undergraduate student at R.I.T. and while involved with exploring the photographic possibilities of moving film type cameras generically known as "strip" cameras. I first learned of the pictorial applications of these cameras from the work of Life Magazine's George Silk and his coverage of the 1960 Olympics with a camera modified for him by Marty Forsher. The first panoramic camera I built consisted of a mechanism for rewinding the film in a standard 35mm camera while the camera was manually panned at a rate controlled by the focal length used on the camera. The longer the lens the slower the pan for a given rewind speed. I took an approach to determining the length of film required for a full 360° shot which was, and remains, rather unorthodox. Instead of using the traditional formula of 2 x f x pi, I divide the vertical angle of view of the lens in use into 360 and multiply this figure by 24mm. While normal focal length lenses require similar lengths by each method it was not until I came in contact with Cirkut photographers that the advantages of the previous method became evident. At the same time that my interest in panoramic photography increased I started to experiment with enlargements. In 1970 I made a 360° 32 foot long print from a panoramic photography made with a 35mm focal length lens on the above camera turned by a battery driven rotating tripod head made for it.
[Show full text]
Photogram Test Strip.Cdr
Goal: Familiarize yourself with the enlarger and timer. Learn to expose in increments to make a test strip. Process the paper in photo chemistry. Black White Gray The building blocks of photographic images Photographic paper is coated with a thin emulsion Equipment: containing a form of silver that is sensitive to light. If 1)Darkroom with amber safelights. it is exposed to light it will get darker. If this paper is 2)Light Source - enlarger with lens protected from light, it will not change color. 3) Cardboard If it is exposed to light and treated with a developing 4) Sink with trays for developing paper solution, the paper will go solid black. 5) Running water for washing prints This paper is sensitized in a way that protects it from Supplies: amber colored light so it can be handled for short 1) Photographic paper periods under "safelight" conditions. 2) Chemistry (developer, Stop, Fix) If the paper is exposed to small amounts of light for brief periods of time, different shades of gray can be Test strip - the fundamental way to determine proper produced. This is the basis of photographic printing. exposure. Negatives made in a camera are used to make "continuous toned photographs" usually consisting of Components of photographic exposure~ Black, White and various shades of Gray. 1)The amount of light 2) The length of time the paper is exposed to the light This exercise has you use an enlarger without a negative as a light source to experiment with gray For this exercise- scales and create multi-toned designs on photo Raise the enlarger about 24 inches, set the timer to two paper.
[Show full text]
EM10 Instructions
!:NGLISH exposure lime and calibration number for this liltrotion according ta the ILFOCHROME 1 Introduction pock of paper. pock · the monitor automatically compensates • lor changes in filter density. • • The llFORD EM 10 exposure monitor allows 5 you lo determine the exposure required for 2.2 If you hove a slide or ncgolive of known l he use of the EM IO with block cmd white colour ond block ond white print making. exposure for a particular enlargement: papers is a little more complicated because EM 1 0 EM 10 Exposure monitor The monitor can be used when printing slides Place the slide or negative and any filtration of the different contrast grades. For groded Po semelre d' agrandissement EM 10 or negatives, and is particularly used in the enlarger. Adjust the degree of papers, such as ILFOSPEED RC Deluxe and _ recommended for use with ILFORD enlargement and lens aperture ta match your ILFOBROM GALERIE FB, a separate 13elichtungskontrollgeriil EM I 0 ILFOCHROME print material. exposure data. calibration is required for each contrast 2 In total darkness, except far the light from the grade. Similarly, with the MULTIGRADE Esposimelro-EM 10. The exposure monitor also outomolicolly enlarger, place the monitor on the enlarger range of variable contrast papers a separate Monitor de exposiciones EM 10 compensates for the change in exposure for boseboord. For slide printing, the sensitive calibration will be required for each of the cell should be in o hirihlight nreo which just MULTIGRADE filters (or colour heod settin[ls) EM 10 Exponeringsmiitore dillerenl density colour filters in the enlarger.
[Show full text]
Photographic Printing Enlarger
Photographic printing From Wikipedia, the free encyclopedia Photographic printing is the process of producing a final image on paper for viewing, using chemically sensitized paper. The paper is exposed to a photographic negative, a positive transparency (or slide), or a digital image file projected using an enlarger or digital exposure unit such as a LightJet printer. Alternatively, the negative or transparency may be placed atop the paper and directly exposed, creating a contact print. Photographs are more commonly printed on plain paper, for example by a color printer, but this is not considered "photographic printing". Following exposure, the paper is processed to reveal and make permanent the latent image. Printing on black-and-white paper The process consists of four major steps, performed in a photographic darkroom or within an automated photo printing machine. These steps are: Exposure of the image onto the sensitized paper using a contact printer or enlarger; Processing of the latent image using the following chemical process: o Development of the exposed image reduces the silver halide in the latent image to metallic silver; o Stopping development by neutralising, diluting or removing the developing chemicals; o Fixing the image by dissolving undeveloped silver halide from the light-sensitive emulsion: o Washing thoroughly to remove processing chemicals protects the finished print from fading and deterioration. Optionally, after fixing, the print is treated with a hypo clearing agent to ensure complete removal of the fixer, which would otherwise compromise the long term stability of the image. Prints can be chemically toned or hand coloured after processing.[ Enlarger From Wikipedia, the free encyclopedia An enlarger is a specialized transparency projector used to produce photographic prints from film or glass negatives using the gelatin silver process, or from transparencies.
[Show full text]
The Fingerprint Sourcebook
CHAPTER THE PRESERVATION OF FRICTION RIDGES Laura A. Hutchins Contributing author Robert E. May CONTENTS 3 8.1 Introduction 16 8.6 Other Methods of Friction Ridge Preservation 3 8.2 History of Photography 19 8.7 Conclusion 5 8.3 Photography in the Criminal 20 8.8 Reviewers Justice Community 6 8.4 The Fingerprint Camera 20 8.9 References 7 8.5 Modern Photography 8–1 The Preservation of Friction RIdges C H A P T E R 8 8.1 Introduction CHAPTER 8 Inherent in the criminal justice community, and specifi- cally the crime laboratory, is the policy that the information derived from evidence must be preserved to the extent possible. With regard to friction ridge detail, methods of THE PRESERVATION OF preservation include film and digital photography, latent print lifts, and the use of casting material. Although the FRICTION RIDGES two latter methods do create secondary evidence in the form of a lift or cast, the photographing of the friction ridge detail on the lift or the cast is still important to generate ad- Laura A. Hutchins ditional secondary evidence. Certainly with respect to state Contributing author and national labs, evidence submitted with a case must be Robert E. May returned to the contributor. With this in mind, the preserva- tion of all relevant friction ridge information derived from evidence is mandatory, and the production of an archival image enables most of that information to be retained within the case file. 8.2 History of Photography Photography dates back to the time of Aristotle and his study of light, specifically his reference to the passing of light through a pinhole and the creation of a reverse image on the ground (London, 2005, p 368).
[Show full text]
Photography in Industrial Arts Gerald D. Keeton
PHOTOGRAPHY IN INDUSTRIAL ARTS by GERALD D. KEETON '<\. Bac~elor of Science Northeastern State College ·,Tahie qU~h, Oklahoma 1952 Submitted to the Faculty of the Graduate School of the Oklahoma State University of Agriculture and Applied Sciences in partial fulfillment of the requirements for the degt~~· of Master of Science 1959 OKLAHOMA STATE UNtV£RSn'Y LIBRARY t NOV 1.:'I :359 t ~ •~• f PHOTOGRAPHY IN INDUSTRIAL ARTS GERAID D. KEETON MASTER OF SCIENCE THESIS APPROVED: Thesis Advisor and Head, D,epartment of Industrial Arts Education Dean of the Graduate School 430783 ACKNOWLEDGMENT.' l wish to express my appreciation and gratitude .to the following person for h:ts enc.ouragement, aid, and advice in making this thesis posslble. To Mr. c. L. Hill, Head, Department of Industrial Arts Education, Oklahoma State Uni versity, for his assistance and guidance given during the preparation of this thesis, and for his time and efforts in helping with my plan of study for the Master of Science Degree. G. D. K. iii TABLE OF:CONTENTS Chapter Page Io AN INTRODUCTORY STATEMENT • • • • 0 • • • • • • • • 1 Purpose of the Study •• • • • 0 • • • • • • • 1 Research Techniques Used • • • • • • • • • • • 2 Scope of Study ••••• • • • • • • • • • • • 2 Definitions of Terms •• • • • • • • • • e • .e 2 II. A BRIEF HISTORY OF INDUSTRIAL ARTS AND PHOT·OGRAPHY. 5 Part A. History of Industrial Arts • • • • • • • • 5 Unconscious Imitation • • • • • • • • • • • • 5 Conscious Imitation • • • • • • • • • • • • • 6 Apprenticeship • • • • • • • , • • • • • • • • • 6
[Show full text]
Photography History: Q & A
Photography History: Q & A By Mr. Martin • Q: What do we call a dark room with a lens or small hole on one wall? • What is so special about such a room? Ans: Camera Obscura • In Italian “camera” means room; “obscura” means dark • An image, which is upside down and reversed, is projected onto the wall opposite the lens or hole • You can trace that image to produce a permanent image • This was known for centuries Camera Obscura • http://www.kellycountry2000.com/ozc am/oz.htm • Q: When was the first photograph? • Who made it? • How was it made? • A: Circa 1826, Joseph Nicephore Niepce made an 8 hour exposure of the view from his window • Used a metal plate coated with a type of light sensitive asphalt http://www.hrc.utexas.edu/exhibitions/permanent/wfp/ • Q: Who did Joseph Niepce later work with and what did that person discover? • A: Niepce collaborated with Louis Jacques Mande Daguerre • Niepce died in 1833 • In 1835 Daguerre made an image using a metal plate covered with light sensitive silver iodine which he then exposed to Mercury vapor • The result: A very high resolution positive image with a nice silvery surface • This is the Daguerreotype – Discovery announced early 1839 An Example of a Daguerreotype http://www.eastmanho use.org/inc/collections/ daguerreotypes.php Louis Jacques Mande Daguerre Jean Baptiste Sabatier-Blot French (1801-1881) 1844, daguerreotype, 9.1 x 6.9 cm, one quarter plate • Q: What was the subject of most Daguerreotypes? • Why? http://www.daguerre.org/resource/texts/fam_xian.html • The favorite subject for Daguerreotypes was portraits of people.
[Show full text]
Photographs of the 19Th Century: a Process Identification Guide
PHOTOGRAPHS FROM THE 19th CENTURY: A Process Identification Guide William E. Leyshon Copyright 1984-2001 William E. Leyshon Copyright (c) 1984-2001 William E. Leyshon. All rights are reserved. This manuscript may not be reproduced in whole or part for commercial distribution without written consent of Sharlot Hall Museum Archives, Prescott, AZ 86301. Single copies may be made for reference use by individuals. The FOTOFIND V2.7 computer program is provided with no warranty of any kind, expressed or implied. Copyright 1984-2001 William E. Leyshon PHOTOGRAPHS FROM THE 19th CENTURY: A Process Identification Guide William E. Leyshon Contents Page Acknowledgements........................................... 4 Credits.................................................... 6 Preface.................................................... 7 How To Use This Book....................................... 7 Introduction............................................... 8 Part One - History of the Processes Chapter 1 - Uncoated Paper................................. 13 Chapter 2 - Coated Paper................................... 21 Chapter 3 - Flexible Negatives............................. 27 Chapter 4 - Bichromate, Carbon, and Oil Processes.......... 33 Chapter 5 - Photomechanical Reproduction................... 37 Chapter 6 - Glass Negatives and Positives.................. 47 Chapter 7 - Daguerreotypes, Ambrotypes, and Tintypes....... 56 Chapter 8 - Cases, Paper Mounts, and cartes de visite...... 66 Chapter 9 - Transferotypes and Miscellaneous Bases........
[Show full text]