R4000/R6000/R8000-W-P6series

Total Page:16

File Type:pdf, Size:1020Kb

R4000/R6000/R8000-W-P6series Regulator: copper and PTFE-free R1000/R2000/R3000 R4000/R6000/R8000-W-P6 Series F.R.L Copper ion prevention treatment ● Port size: 1/8 to 1 F (Filtr) JIS symbol R (Reg) L (Lub) PresSW How to order Shutoff * Refer to page 28 for the A Model No. R1000 6 W T P6 A6W explanation of the option. SlowStart (White type) Copper and PTFE G Bracket (attachments) FlmResistFR A Model No. free specifications F Pipe adaptor set (attachments) Oil-ProhR Code Content R1000 R2000 R3000 R4000 R6000 R8000 MedPresFR B Port size No Cu/ B Port size 6 1/8 ● PTFE FRL 8 1/4 ● ● ● ● Outdrs FR 10 3/8 ● ● ● F.R.L (Related) 15 1/2 ● 20 3/4 ● ● CompFRL 25 1 ● ● LgFRL C Port thread *2 C Port thread PrecsR Blank Rc thread ● ● ● ● ● ● N NPT thread ● ● ● ● ● ● VacF/R ● ● ● ● ● ● G G thread Clean FR D Option *3 D Option ElecPneuR Pressure Blank 0.05 to 0.85 MPa ● ● ● ● ● ● range L 0.05 to 0.35 MPa ● ● ● ● ● ● AirBoost ● ● ● ● ● ● Pressure Blank With relief mechanism SpdContr relief N Non-relief ● ● ● ● ● ● T No pressure gauge (gauge port (1/4) is assembled sealed) ● ● ● ● ● ● Silncr Pressure T6 Pressure gauge ready (gauge port (Rc 1/8) is left open) *6 ● ● ● ● ● ● CheckV/ gauge other T8 Pressure gauge ready (gauge port (1/4) is left open) *6 ● ● ● ● ● ● Flow Blank Standard flow (left → right) ● ● ● ● ● ● Jnt/tube direction X1 Reverse flow (right → left) ● ● ● ● ● ● AirUnt E Display unit E Display unit PrecsCompn Blank MPa display, Rc thread ● ● ● ● ● ● Mech/ J1 MPa display, NPT, G thread ● ● ● ● ● ● ElecPresSw F Pipe adaptor set (attachments) Page 270 *4, *5 ContactSW Blank Not attached ● ● ● ● ● ● AirSens A6*W 1/8 pipe adaptor set ● PresSW A8*W 1/4 pipe adaptor set ● ● ● ● Cool A10*W 3/8 pipe adaptor set ● ● ● ● AirFloSens/ Contr A15*W 1/2 pipe adaptor set ● ● ● A20*W 3/4 pipe adaptor set ● ● ● WaterRtSens A25*W 1 pipe adaptor set ● TotAirSys (Total Air) Precautions for model No. selection ● A32*W 1 1/4 pipe adaptor set TotAirSys *1 : Refer to pages 124 to 130 for specifications, * Adaptor thread (Gamma) dimensions and flow characteristics. ● ● ● ● ● ● *2 : G threads and NPT threads are available for IN, OUT, Blank Rc thread RefrDry and gauge ports. N NPT thread ● ● ● ● ● ● *3 : Select any one of the options. DesicDry G thread ● ● ● ● ● ● *4 : The pipe adaptor set and C type bracket cannot be G HiPolymDry used together. G Bracket (attachments) Page 267 *5 : The joiner set is enclosed with the pipe adaptor set. ● ● ● ● ● ● *6 : The pressure gauge must be prepared separately. Blank Not attached MainFiltr T6:G49D-6-P10-P6(L:G49D-6-P04-P6) BW C type bracket ● ● ● ● ● ● Dischrg T8:G59D-8-P10-P6(L:G59D-8-P04-P6) B3W L type bracket ● ● ● ● ● etc B4W B type bracket ● Ending 243 Reverse regulator: copper and PTFE-free R1100/R2100/R3100 R4100/R6100/R8100-W-P6 Series F.R.L Copper ion prevention treatment F (Filtr) ● Port size: 1/8 to 1 R (Reg) JIS symbol L (Lub) PresSW How to order Shutoff * Refer to page 28 for the A Model No. SlowStart R1100 6 W T P6 A6 explanation of the option. FlmResistFR (White type) Copper and PTFE G Bracket (attachments) A Model No. free specifications Oil-ProhR F Pipe adaptor set (attachments) MedPresFR Code Content R1100 R2100 R3100 R4100 R6100 R8100 No Cu/ B Port size B Port size PTFE FRL 6 1/8 ● Outdrs FR 8 1/4 ● ● ● ● F.R.L 10 3/8 ● ● ● (Related) 15 1/2 ● CompFRL 20 3/4 ● ● LgFRL 25 1 ● ● C Port thread *2 PrecsR C Port thread Blank Rc thread ● ● ● ● ● ● VacF/R N NPT thread ● ● ● ● ● ● ● ● ● ● ● ● Clean FR G G thread D Option *3, *4 ElecPneuR D Option Pressure Blank 0.05 to 0.85 MPa ● ● ● ● ● ● AirBoost range L 0.05 to 0.35 MPa ● ● ● ● ● ● ● ● ● ● ● ● SpdContr Pressure Blank With relief mechanism relief N Non-relief ● ● ● ● ● ● Silncr T No pressure gauge (gauge port (1/4) is assembled sealed) ● ● ● ● ● ● Pressure CheckV/ T6 Pressure gauge ready (gauge port (Rc 1/8) is left open) *7 ● ● ● ● ● ● other gauge T8 Pressure gauge ready (gauge port (1/4) is left open) *7 ● ● ● ● ● ● Jnt/tube Flow Blank Standard flow (left → right) ● ● ● ● ● ● AirUnt direction X1 Reverse flow (right → left) ● ● ● ● ● ● E Display unit PrecsCompn E Display unit Blank MPa display, Rc thread ● ● ● ● ● ● Mech/ ElecPresSw J1 MPa display, NPT, G thread ● ● ● ● ● ● ContactSW F Pipe adaptor set (attachments) Page 270 *5, *6 Blank Not attached ● ● ● ● ● ● AirSens A6*W 1/8 pipe adaptor set ● PresSW Cool A8*W 1/4 pipe adaptor set ● ● ● ● AirFloSens/ A10*W 3/8 pipe adaptor set ● ● ● ● Contr A15*W 1/2 pipe adaptor set ● ● ● WaterRtSens Precautions for model No. selection A20*W 3/4 pipe adaptor set ● ● ● TotAirSys *1 : Refer to pages 132 to 138 for specifications, A25*W 1 pipe adaptor set ● (Total Air) dimensions and flow characteristics. A32*W 1 1/4 pipe adaptor set ● TotAirSys *2 : G and NPT threads are available for IN, OUT, and (Gamma) gauge ports. * Adaptor thread RefrDry *3 : Select any one of the options. Blank Rc thread ● ● ● ● ● ● *4 : Positions of check valve and pressure gauge cannot be N NPT thread ● ● ● ● ● ● DesicDry changed. If the IN and OUT directions must be reversed, indicate “X1” at the end of the option field. G G thread ● ● ● ● ● ● HiPolymDry *5 : The pipe adaptor set and C type bracket cannot be used together. G Bracket (attachments) Page 267 MainFiltr *6 : The joiner set is enclosed with the pipe adaptor set. Blank Not attached ● ● ● ● ● ● *7 : The pressure gauge must be prepared separately. ● ● ● ● ● ● Dischrg T6:G49D-6-P10-P6(L:G49D-6-P04-P6) BW C type bracket etc T8:G59D-8-P10-P6(L:G59D-8-P04-P6) B3W L type bracket ● ● ● ● ● Ending B4W B type bracket ● 244.
Recommended publications
  • MIPS IV Instruction Set
    MIPS IV Instruction Set Revision 3.2 September, 1995 Charles Price MIPS Technologies, Inc. All Right Reserved RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure of the technical data contained in this document by the Government is subject to restrictions as set forth in subdivision (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 52.227-7013 and / or in similar or successor clauses in the FAR, or in the DOD or NASA FAR Supplement. Unpublished rights reserved under the Copyright Laws of the United States. Contractor / manufacturer is MIPS Technologies, Inc., 2011 N. Shoreline Blvd., Mountain View, CA 94039-7311. R2000, R3000, R6000, R4000, R4400, R4200, R8000, R4300 and R10000 are trademarks of MIPS Technologies, Inc. MIPS and R3000 are registered trademarks of MIPS Technologies, Inc. The information in this document is preliminary and subject to change without notice. MIPS Technologies, Inc. (MTI) reserves the right to change any portion of the product described herein to improve function or design. MTI does not assume liability arising out of the application or use of any product or circuit described herein. Information on MIPS products is available electronically: (a) Through the World Wide Web. Point your WWW client to: http://www.mips.com (b) Through ftp from the internet site “sgigate.sgi.com”. Login as “ftp” or “anonymous” and then cd to the directory “pub/doc”. (c) Through an automated FAX service: Inside the USA toll free: (800) 446-6477 (800-IGO-MIPS) Outside the USA: (415) 688-4321 (call from a FAX machine) MIPS Technologies, Inc.
    [Show full text]
  • 2 MIPS Architecture 29
    See MIPS® Run Second Edition ThisPageIntentionallyLeftBlank See MIPS® Run Second Edition Dominic Sweetman AMSTERDAM • BOSTON • HEIDELBERG • LONDON NEW YORK • OXFORD • PARIS • SAN DIEGO SAN FRANCISCO • SINGAPORE • SYDNEY • TOKYO Morgan Kaufmann Publishers is an imprint of Elsevier Publisher: Denise E. M. Penrose Publishing Services Manager: George Morrison Senior Project Manager: Brandy Lilly Editorial Assistant: Kimberlee Honjo Cover Design: Alisa Andreola and Hannus Design Composition: diacriTech Technical Illustration: diacriTech Copyeditor: Denise Moore Proofreader: Katherine Antonsen Indexer: Steve Rath Interior Printer: The Maple-Vail Book Manufacturing Group, Inc. Cover Printer: Phoenix Color Morgan Kaufmann Publishers is an imprint of Elsevier. 500 Sansome Street, Suite 400, San Francisco, CA 94111 This book is printed on acid-free paper. © 2007 by Elsevier Inc. All rights reserved. MIPS, MIPS I, MIPS II, MIPS III, MIPS IV, MIPS V, MIPS16, MIPS16e, MIPS-3D, MIPS32, MIPS64, 4K, 4KE, 4KEc, 4KSc, 4KSd, M4K, 5K, 20Kc, 24K, 24KE, 24Kf, 25Kf, 34K, R3000, R4000, R5000, R10000, CorExtend, MDMX, PDtrace and SmartMIPS are trademarks or registered trademarks of MIPS Technologies, Inc. in the United States and other countries, and used herein under license from MIPS Technologies, Inc. MIPS, MIPS16, MIPS32, MIPS64, MIPS-3D and SmartMIPS, among others, are registered in the U.S. Patent and Trademark Office. Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. Designations used by companies to distinguish their products are often claimed as trademarks or registered trade- marks. In all instances in which Morgan Kaufmann Publishers is aware of a claim, the product names appear in initial capital or all capital letters.
    [Show full text]
  • Pluggable Interface Relays CR-M Miniature Relays
    Data sheet Pluggable interface relays CR-M Miniature relays Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems and the sensor / actuator level. They don’t use additional internal protective circuits and thus are overload-proof against short-time variations like current or voltage peaks. 2CDC 291 002 S0015 Characteristics Approvals – Standard miniature relays with mechanical status indication H ANSI/UL 508, CAN/CSA C22.2 No.14 – 13 different rated control supply voltages: F CAN/CSA C22.2 No.14 DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V J VDE (except 125 V DC devices) AC versions: 24 V, 48 V, 60 V, 110 V, 120 V, 230 V EAC – Output: 2 c/o (SPDT) contacts (12 A), 3 c/o (SPDT) R contacts (10 A) or 4 c/o (SPDT) contacts (6 A) P Lloyds Register (only devices with 4 c/o (SPDT) – Available with or without LED contacts) CCC – 4 c/o (SPDT) contact version optionally equipped with E gold contacts, LED and free wheeling diode L RMRS (except 60 V and 125 V devices) – Integrated test button for manual actuation and locking of output contacts (DC coil = blue, AC coil = orange) that Marks can be removed if necessary a CE – Cadmium-free contact material – Suited for logical and standard sockets – Width on socket: 27 mm (1.063 in) – Pluggable function modules: reverse polarity protection/ free wheeling diode, LED indication, RC elements, overvoltage protection Order data Packing unit = 10 pieces
    [Show full text]
  • RISC-V Geneology
    RISC-V Geneology Tony Chen David A. Patterson Electrical Engineering and Computer Sciences University of California at Berkeley Technical Report No. UCB/EECS-2016-6 http://www.eecs.berkeley.edu/Pubs/TechRpts/2016/EECS-2016-6.html January 24, 2016 Copyright © 2016, by the author(s). All rights reserved. Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. To copy otherwise, to republish, to post on servers or to redistribute to lists, requires prior specific permission. Introduction RISC-V is an open instruction set designed along RISC principles developed originally at UC Berkeley1 and is now set to become an open industry standard under the governance of the RISC-V Foundation (www.riscv.org). Since the instruction set architecture (ISA) is unrestricted, organizations can share implementations as well as open source compilers and operating systems. Designed for use in custom systems on a chip, RISC-V consists of a base set of instructions called RV32I along with optional extensions for multiply and divide (RV32M), atomic operations (RV32A), single-precision floating point (RV32F), and double-precision floating point (RV32D). The base and these four extensions are collectively called RV32G. This report discusses the historical precedents of RV32G. We look at 18 prior instruction set architectures, chosen primarily from earlier UC Berkeley RISC architectures and major proprietary RISC instruction sets. Among the 122 instructions in RV32G: ● 6 instructions do not have precedents among the selected instruction sets, ● 98 instructions of the 116 with precedents appear in at least three different instruction sets.
    [Show full text]
  • Computer Architectures an Overview
    Computer Architectures An Overview PDF generated using the open source mwlib toolkit. See http://code.pediapress.com/ for more information. PDF generated at: Sat, 25 Feb 2012 22:35:32 UTC Contents Articles Microarchitecture 1 x86 7 PowerPC 23 IBM POWER 33 MIPS architecture 39 SPARC 57 ARM architecture 65 DEC Alpha 80 AlphaStation 92 AlphaServer 95 Very long instruction word 103 Instruction-level parallelism 107 Explicitly parallel instruction computing 108 References Article Sources and Contributors 111 Image Sources, Licenses and Contributors 113 Article Licenses License 114 Microarchitecture 1 Microarchitecture In computer engineering, microarchitecture (sometimes abbreviated to µarch or uarch), also called computer organization, is the way a given instruction set architecture (ISA) is implemented on a processor. A given ISA may be implemented with different microarchitectures.[1] Implementations might vary due to different goals of a given design or due to shifts in technology.[2] Computer architecture is the combination of microarchitecture and instruction set design. Relation to instruction set architecture The ISA is roughly the same as the programming model of a processor as seen by an assembly language programmer or compiler writer. The ISA includes the execution model, processor registers, address and data formats among other things. The Intel Core microarchitecture microarchitecture includes the constituent parts of the processor and how these interconnect and interoperate to implement the ISA. The microarchitecture of a machine is usually represented as (more or less detailed) diagrams that describe the interconnections of the various microarchitectural elements of the machine, which may be everything from single gates and registers, to complete arithmetic logic units (ALU)s and even larger elements.
    [Show full text]
  • Electronic Products and Relays Selection Table Interface Relays CR-Range and R600 / R500 Range Pluggable Interface Relays
    Electronic Products and Relays Selection Table Interface Relays CR-Range and R600 / R500 Range Pluggable Interface Relays CR-M Range Order number number Order 1SVR 405 611 R4000 1SVR 405 611 R1000 1SVR 405 611 R6000 1SVR 405 611 R4200 1SVR 405 611 R8000 1SVR 405 611 R8200 1SVR 405 611 R9000 1SVR 405 611 R0000 1SVR 405 611 R5000 1SVR 405 611 R7000 1SVR 405 611 R2000 1SVR 405 611 R3000 1SVR 405 612 R4000 1SVR 405 612 R1000 1SVR 405 612 R6000 1SVR 405 612 R4200 1SVR 405 612 R8000 1SVR 405 612 R8200 1SVR 405 612 R9000 1SVR 405 612 R0000 1SVR 405 612 R5000 1SVR 405 612 R5200 1SVR 405 612 R7000 1SVR 405 612 R2000 1SVR 405 612 R3000 1SVR 405 613 R4000 1SVR 405 613 R1000 1SVR 405 613 R6000 1SVR 405 613 R4200 1SVR 405 613 R8000 1SVR 405 613 R8200 1SVR 405 613 R9000 1SVR 405 613 R0000 1SVR 405 613 R5000 1SVR 405 613 R7000 1SVR 405 613 R2000 1SVR 405 613 R3000 1SVR 405 611 R4100 1SVR 405 611 R1100 1SVR 405 611 R6100 1SVR 405 611 R4300 1SVR 405 611 R8100 1SVR 405 611 R8300 1SVR 405 611 R9100 1SVR 405 611 R0100 1SVR 405 611 R5100 1SVR 405 611 R7100 1SVR 405 611 R2100 1SVR 405 611 R3100 1SVR 405 612 R4100 1SVR 405 612 R1100 1SVR 405 612 R6100 1SVR 405 612 R4300 1SVR 405 612 R8100 1SVR 405 612 R8300 1SVR 405 612 R9100 1SVR 405 612 R0100 1SVR 405 612 R5100 1SVR 405 612 R7100 1SVR 405 612 R2100 1SVR 405 612 R3100 1SVR 405 613 R4100 1SVR 405 613 R1100 1SVR 405 613 R6100 1SVR 405 613 R4300 1SVR 405 613 R8100 1SVR 405 613 R8300 1SVR 405 613 R9100 1SVR 405 613 R0100 1SVR 405 613 R5100 1SVR 405 613 R7100 1SVR 405 613 R2100 1SVR 405 613 R3100 1SVR 405 614 R1100
    [Show full text]
  • Pluggable Interface Relays CR-M Miniature Relays Data Sheet
    Pluggable interface relays CR-M Miniature relays Data sheet Features ½ Standard miniature relays with mechanical status indication ½ 12 different supply voltages: 1 DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V ½ 2 Output contacts: 2 c/o (12 A), 3 c/o (10 A) or 4 c/o (6 A) ½ 2CDC 293 035 F0004 Available with or without LED 4 ½ 4-c/o version optionally equipped with gold contacts ½ Integrated test button for manual actuation and locking of output contacts (blue =DC, orange = AC) 3 ½ Cadmium-free contact material ½ Width on socket: 27 mm 5 ½ Suited for logical and standard sockets ½ Pluggable function modules: reverse polarity protection, LED indication, RC elements, overvoltage protection CR-M Approvals ቢ Interface relay ባ Pluggable function module n ቤ Socket l (not 125 V DC versions) ብ Holder j ቦ Marker e (only 4-c/o contact version) Marks g Ordering data Type Supply voltage Order code Interface relays without LED 2 c/o contacts: 250 V, 12 A CR-M012DC2 12 V DC 1SVR 405 611 R4000 CR-M024DC2 24 V DC 1SVR 405 611 R1000 CR-M048DC2 48 V DC 1SVR 405 611 R6000 CR-M060DC2 60 V DC 1SVR 405 611 R4200 CR-M110DC2 110 V DC 1SVR 405 611 R8000 CR-M125DC2 125 V DC 1SVR 405 611 R8200 CR-M220DC2 220 V DC 1SVR 405 611 R9000 CR-M024AC2 24 V AC 1SVR 405 611 R0000 CR-M048AC2 48 V AC 1SVR 405 611 R5000 CR-M110AC2 110 V AC 1SVR 405 611 R7000 CR-M120AC2 120 V AC 1SVR 405 611 R2000 CR-M230AC2 230 V AC 1SVR 405 611 R3000 Bold printed products = stocked products.
    [Show full text]
  • A 7 CPU Instruction Formats a CPU Instruction Is a Single 32-Bit Aligned Word
    A 7 CPU Instruction Formats A CPU instruction is a single 32-bit aligned word. The major instruction formats are shown in Figure A-10. I-Type (Immediate). 31 26 25 21 20 16 15 0 opcode rs rt offset 6 5 5 16 J-Type (Jump). 31 26 25 0 opcode instr_index 6 26 R-Type (Register). 31 26 25 21 20 16 15 11 10 6 5 0 opcode rs rt rd sa function 6 5 5 5 5 6 opcode 6-bit primary operation code rd 5-bit destination register specifier rs 5-bit source register specifier 5-bit target (source/destination) register specifier or used to rt specify functions within the primary opcode value REGIMM immediate 16-bit signed immediate used for: logical operands, arithmetic signed operands, load/store address byte offsets, PC-relative branch signed instruction displacement instr_index 26-bit index shifted left two bits to supply the low-order 28 bits of the jump target address. sa 5-bit shift amount 6-bit function field used to specify functions within the primary function operation code value SPECIAL. Figure A-10 CPU Instruction Formats A-174 MIPS IV Instruction Set. Rev 3.2 CPU Instruction Set A 8 CPU Instruction Encoding This section describes the encoding of user-level, i.e. non-privileged, CPU instructions for the four levels of the MIPS architecture, MIPS I through MIPS IV. Each architecture level includes the instructions in the previous level;† MIPS IV includes all instructions in MIPS I, MIPS II, and MIPS III. This section presents eight different views of the instruction encoding.
    [Show full text]
  • MIPS R4000 Microprocessor User's Manual Iii MIPS R4000 Microprocessor User's Manual Iv Acknowledgments for the Second Edition
    MIPS R4000 Microprocessor User’s Manual Second Edition Joe Heinrich 1994 MIPS Technologies, Inc. All Rights Reserved. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure of the technical data contained in this document by the Government is subject to restrictions as set forth in subdivision (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 52.227-7013 and/or in similar or successor clauses in the FAR, or in the DOD or NASA FAR Supplement. Unpublished rights reserved under the Copyright Laws of the United States. Contractor/manufacturer is MIPS Technologies, Inc., 2011 N. Shoreline Blvd., Mountain View, CA 94039-7311. RISCompiler, RISC/os, R2000, R6000, R4000, and R4400 are trademarks of MIPS Technologies, Inc. MIPS and R3000 are registered trademarks of MIPS Technologies, Inc. IBM 370 is a registered trademark of International Business Machines. VAX is a registered trademark of Digital Equipment Corporation. iAPX is a registered trademark of Intel Corporation. MC68000 is a registered trademark of Motorola Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company, Ltd. MIPS Technologies, Inc. 2011 North Shoreline Mountain View, California 94039-7311 Acknowledgments for the First Edition First of all, special thanks go to Duk Chun for his patient help in supplying and verifying the content of this manual; that this manual is technically correct is, in a very large part, directly attributable to him. Thanks also to the following people for
    [Show full text]
  • Pluggable Interface Relays CR-M Miniature Relays Data Sheet
    Pluggable interface relays CR-M Miniature relays Data sheet Features ½ Standard miniature relays with mechanical status indication ½ 12 different supply voltages: 1 DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V AC versions: 24 V, 48 V, 60 V, 110 V, 120 V, 230 V 2 ½ Output: 2 c/o (SPDT) contacts (12 A), 3 c/o (SPDT) contacts (10 A) or 4 c/o (SPDT) contacts (6 A) 2CDC 293 035 F0004 ½ Available with or without LED 4 ½ 4-c/o (SPDT) version optionally equipped with gold contacts, LED and free wheeling diode ½ Integrated test button for manual actuation and locking of output contacts (blue =DC, orange = AC) 3 that can be removed if necessary ½ Cadmium-free contact material 5 ½ Suited for logical and standard sockets ½ Width on socket: 27 mm ½ Pluggable function modules: reverse polarity protection/free wheeling diode, LED indication, RC elements, overvoltage protection, time modules CR-M ᕃ Interface relay ᕄ Pluggable function module Approvals ᕅ Socket ᕆ Holder G UL508 (except 60 V DC and 125 V DC devices with gold contacts) ᕇ Marker O CAN/CSA C22.2 No.14 (except devices with gold contacts) F CAN/CSA C22.2 No.14 (except 60 V DC and 125 V DC devices) J VDE (except 125 V DC devices) D GOST P Lloyds Register (only devices with 4 c/o (SPDT) contacts) E CCC L RMRS Marks a CE Order data Type Rated control supply voltage US Order code Interface relays without LED 2 c/o (SPDT) contacts: 250 V, 12 A CR-M012DC2 12 V DC 1SVR 405 611 R4000 CR-M024DC2 24 V DC 1SVR 405 611 R1000 CR-M048DC2 48 V DC 1SVR 405 611 R6000 CR-M060DC2 60 V DC 1SVR 405 611 R4200 CR-M110DC2 110 V DC 1SVR 405 611 R8000 CR-M125DC2 125 V DC 1SVR 405 611 R8200 CR-M220DC2 220 V DC 1SVR 405 611 R9000 CR-M024AC2 24 V AC 1SVR 405 611 R0000 CR-M048AC2 48 V AC 1SVR 405 611 R5000 CR-M110AC2 110 V AC 1SVR 405 611 R7000 CR-M120AC2 120 V AC 1SVR 405 611 R2000 CR-M230AC2 230 V AC 1SVR 405 611 R3000 Bold printed products = stocked products.
    [Show full text]
  • R1000/R2000/R3000 R4000/R6000/R8000-W Series Compact, Pressure Gauge Embedded
    Regulator standard white Series R1000/R2000/R3000 R4000/R6000/R8000-W Series Compact, pressure gauge embedded. Port size: 1/8 to 1 JIS symbol Specifications Descriptions R1000-W R2000-W R3000-W R4000-W R6000-W R8000-W Appearance Working fluid Compressed air Max. working pressure MPa 1 Withstanding pressure MPa 1.5 Ambient temperature range °C 5 to 60 Note 1 Set pressure range MPa 0.05 to 0.85 Relief With relief mechanism 1/8, 1/4 1/4, 3/8 1/4, 3/8 1/4, 3/8, 1/2 3/4, 1 3/4, 1 Port size Rc, NPT, G (3/8 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (3/4 uses an adaptor) (1 1/4 uses an adaptor) (1 1/4 uses an adaptor) Product weight kg 0.16 0.31 0.45 0.7 1.0 1.6 Standard accessories Pressure gauge, nut for panel mount Pressure gauge Note 1: The working temperature range of the pressure switch with indicator PPD assembly "R1" is 5 to 50°C. Ozone specifications (Ending 12) R*000 - ··· - W ··· - P11 Clean room specifications (catalog No. CB-033S) MDust generation preventing structure for use in cleanrooms R*000 - ··········· - P7* Secondary battery compatible specifications (catalog No. CC-947) MStructured for use in secondary battery manufacturing processes R*000 - ··········· - P4* 378 Regulator Series How to order How to order * Refer to page 274 for the explanation of the option. A Model no. R R R R R R R1000 6 W L A6W 1 2 3 4 6 8 G Attachment (attached) 0 0 0 0 0 0 F Piping adaptor set (attached) 0 0 0 0 0 0 0 0 0 0 0 0 Symbol Descriptions A Model no.
    [Show full text]
  • See Mips Run.Pdf
    Foreword John L. Hennessy, Founder, MIPS Technolagies Inc. Frederick Emmons Terman Dean of Engineering, Stanford University am very pleased to see this new book on the MIPS architecture at such an Iinteresting time in the 15-year history of the architecture. The MIPS archi- tecture had its beginnings in 1984 and was first delivered in 1985. By the late 1980s, the architecture had been adopteda variety of workstation and server companies, including Silicon Graphics and Digital Equipment Corpo- ration. The early 1990s saw the introduction of the R4000, the first 64-bit microprocessor, while the mid 1990s saw the introduction of the R10000 — at the time of its introduction, the most architecturally sophisticated CPU ever built. The end of the 1990s heralds a new era for the MIPS architecture: its emergence as a leading architecture in the embedded processor market. To date, over 100 million MIPS processors have been shipped in applications ranging from video games and palmtops, to laser printers and network routers, to emerging markets, such as set-top boxes. Embedded MIPS processors now ournumber MIPS processors in general-purpose computers by more than 1,000 to 1. This growth of the MIPS architecture in the embedded space and its enormous potential led to the spinout of MIPS Technologies (from Silicon Graphics) as an independent company in 1998. Thus, this book focusing on the MIPS architecture in the embedded mar- ket comes at a very propitious time. Unlike the well-known MIPS architecture handbook, which is largely a reference manual, this book is highly readable and contains a wealth of sage advice to help the programmer to avoid pitfalls, to understand some of the tradeoffs among MIPS implementations, and to optimize performance on MIPS processors.
    [Show full text]