HP C Run-Time Library Reference Manual for Openvms Systems

Total Page:16

File Type:pdf, Size:1020Kb

HP C Run-Time Library Reference Manual for Openvms Systems HP C Run-Time Library Reference Manual for OpenVMS Systems Order Number: BA554-90014 June 2010 This manual describes the functions and macros in the HP C Run-Time Library for OpenVMS systems. Revision/Update Information: This manual supersedes the HP C Run-Time Library Reference Manual for OpenVMS Systems, Version 8.3 Software Version: OpenVMS Version 8.4 for Integrity servers OpenVMS Alpha Version 8.4 Hewlett-Packard Company Palo Alto, California © Copyright 2010 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. UNIX is a registered trademark of The Open Group. X/Open is a registered trademark of X/Open Company Ltd. in the UK and other countries. Intel and Itanium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are US registered trademarks of Microsoft Corporation. Printed in the US ZK5763 The HP OpenVMS documentation set is available on CD-ROM. This document was prepared using DECdocument, Version 3.3-1b. Portions of the HP C Run-Time Library have been implemented using source copyrighted by the University of California, Berkley and its contributors. Copyright (c) 1981 Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. 4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ‘‘AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Contents Preface ............................................................ xxv 1 Introduction 1.1 Using the HP C Run-Time Library .............................. 1–2 1.2 RTL Linking Options . ........................................ 1–3 1.2.1 Linking with the Shareable Image ............................ 1–3 1.2.2 Linking with the Object Libraries (Alpha only) ..................... 1–3 1.2.3 Examples ............................................... 1–5 1.2.4 DECC$SHRP.EXE Image . ................................ 1–6 1.3 HP C RTL Function Prototypes and Syntax . ....................... 1–6 1.3.1 Function Prototypes ....................................... 1–6 1.3.2 Syntax Conventions for Function Prototypes .................... 1–7 1.3.3 UNIX Style File Specifications ............................... 1–7 1.3.4 Extended File Specifications ................................ 1–10 1.3.5 Symbolic Links and POSIX Pathnames . ....................... 1–10 1.4 Feature-Test Macros for Header-File Control ....................... 1–10 1.4.1 Standards Macros ........................................ 1–10 1.4.2 Selecting a Standard ...................................... 1–11 1.4.3 Interactions with the /STANDARD Qualifier.................... 1–13 1.4.4 Multiple-Version-Support Macro ............................. 1–15 1.4.5 Compatibility Modes ...................................... 1–15 1.4.6 Curses and Socket Compatibility Macros ....................... 1–16 1.4.7 2 GB File Size Macro ...................................... 1–17 1.4.8 32-Bit UID and GID Macro (Integrity servers, Alpha) .................. 1–17 1.4.9 Standard-Compliant stat Structure (Integrity servers, Alpha) ............ 1–18 1.4.10 Using Legacy _toupper and _tolower Behavior (Integrity servers, Alpha) .... 1–18 1.4.11 Using Faster, Inlined Put and Get Functions (Integrity servers, Alpha) ..... 1–18 1.4.12 POSIX Style exit (Integrity servers, Alpha) .......................... 1–18 1.5 Enabling C RTL Features Using Feature Logical Names ............. 1–19 1.6 32-Bit UIDs/GIDs and POSIX Style Identifiers..................... 1–38 1.7 Input and Output on OpenVMS Systems . ....................... 1–39 1.7.1 RMS Record and File Formats ............................... 1–41 1.7.2 Access to RMS Files ....................................... 1–42 1.7.2.1 Accessing RMS Files in Stream Mode ...................... 1–43 1.7.2.2 Accessing RMS Record Files in Record Mode . ............... 1–43 1.7.2.2.1 Accessing Variable-Length or VFC Record Files in Record Mode ............................................ 1–45 1.7.2.2.2 Accessing Fixed-Length Record Files in Record Mode ....... 1–46 1.7.2.3 Example—Difference Between Stream Mode and Record Mode . 1–46 1.8 Specific Portability Concerns . ................................ 1–48 1.8.1 Reentrancy .............................................. 1–50 1.8.2 Multithread Restrictions . ................................ 1–52 1.9 64-Bit Pointer Support (Integrity servers, Alpha) ......................... 1–53 v 1.9.1 Using the HP C Run-Time Library ........................... 1–53 1.9.2 Obtaining 64-Bit Pointers to Memory ......................... 1–54 1.9.3 HP C Header Files ........................................ 1–54 1.9.4 Functions Affected ........................................ 1–55 1.9.4.1 No Pointer-Size Impact ................................. 1–55 1.9.4.2 Functions Accepting Both Pointer Sizes . ................... 1–56 1.9.4.3 Functions with Two Implementations . ................... 1–56 1.9.4.4 Socket Transfers Greater than 64 KB . ................... 1–57 1.9.4.5 Functions Requiring Explicit use of 64-Bit Structures .......... 1–58 1.9.4.6 Functions Restricted to 32-Bit Pointers . ................... 1–60 1.9.5 Reading Header Files . .................................... 1–60 2 Understanding Input and Output 2.1 Using RMS from RTL Routines ................................. 2–4 2.2 UNIX I/O and Standard I/O .................................... 2–5 2.3 Wide-Character Versus Byte I/O Functions ........................ 2–6 2.4 Conversion Specifications . .................................... 2–7 2.4.1 Converting Input Information . ............................ 2–7 2.4.2 Converting Output Information . ............................ 2–13 2.5 Terminal I/O . ............................................ 2–19 2.6 Program Examples ........................................... 2–20 3 Character, String, and Argument-List Functions 3.1 Character-Classification Functions . ............................ 3–4 3.2 Character-Conversion Functions ................................ 3–7 3.3 String and Argument-List Functions . ............................ 3–9 3.4 Program Examples ........................................... 3–10 4 Error and Signal Handling 4.1 Error Handling . ............................................ 4–2 4.2 Signal Handling . ............................................ 4–5 4.2.1 OpenVMS Versus UNIX Terminology .......................... 4–5 4.2.2 UNIX Signals and the HP C RTL ............................ 4–6 4.2.3 Signal-Handling Concepts .................................. 4–8 4.2.4 Signal Actions ........................................... 4–8 4.2.5 Signal Handling and OpenVMS Exception Handling . ........... 4–9 4.3 Program Example ........................................... 4–13 5 Subprocess Functions 5.1 Implementing Child Processes in HP C ........................... 5–2 5.2 The exec Functions .......................................... 5–3 5.2.1 exec Processing .......................................... 5–4 5.2.2 exec Error Conditions . .................................... 5–5 5.3 Synchronizing Processes . .................................... 5–5 5.4 Interprocess Communication ................................... 5–5 5.5 Program Examples ........................................... 5–5 vi 6 Curses Screen Management Functions and Macros 6.1 Using the BSD-Based Curses Package (Alpha only) .................... 6–1 6.2 Curses Overview ...........................................

  1092
Recommended publications
  • Openvms Record Management Services Reference Manual
    OpenVMS Record Management Services Reference Manual Order Number: AA-PV6RD-TK April 2001 This reference manual contains general information intended for use in any OpenVMS programming language, as well as specific information on writing programs that use OpenVMS Record Management Services (OpenVMS RMS). Revision/Update Information: This manual supersedes the OpenVMS Record Management Services Reference Manual, OpenVMS Alpha Version 7.2 and OpenVMS VAX Version 7.2 Software Version: OpenVMS Alpha Version 7.3 OpenVMS VAX Version 7.3 Compaq Computer Corporation Houston, Texas © 2001 Compaq Computer Corporation Compaq, AlphaServer, VAX, VMS, the Compaq logo Registered in U.S. Patent and Trademark Office. Alpha, PATHWORKS, DECnet, DEC, and OpenVMS are trademarks of Compaq Information Technologies Group, L.P. in the United States and other countries. UNIX and X/Open are trademarks of The Open Group in the United States and other countries. All other product names mentioned herein may be the trademarks of their respective companies. Confidential computer software. Valid license from Compaq required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.
    [Show full text]
  • Chapter 10 Streams Streams Text Files and Binary Files
    Streams Chapter 10 • A stream is an object that enables the flow of File I/O data between a ppgrogram and some I/O device or file – If the data flows into a program, then the stream is called an input stream – If the dtdata flows out of a program, then the stream is called an output stream Copyright © 2012 Pearson Addison‐Wesley. All rights reserved. 10‐2 Streams Text Files and Binary Files • Input streams can flow from the kbkeyboar d or from a • Files that are designed to be read by human beings, file and that can be read or written with an editor are – StSystem. in is an itinput stream tha t connects to the called text files keyboard – Scanner keyy(y);board = new Scanner(System.in); Text files can also be called ASCII files because the data they contain uses an ASCII encoding scheme • Output streams can flow to a screen or to a file – An advantage of text files is that the are usually the same – System.out is an output stream that connects to the screen on all computers, so tha t they can move from one System.out.println("Output stream"); computer to another Copyright © 2012 Pearson Addison‐Wesley. All rights reserved. 10‐3 Copyright © 2012 Pearson Addison‐Wesley. All rights reserved. 10‐4 Text Files and Binary Files Writing to a Text File • Files tha t are didesigne d to be read by programs and • The class PrintWriter is a stream class that consist of a sequence of binary digits are called binary files that can be used to write to a text file – Binary files are designed to be read on the same type of – An object of the class PrintWriter has the computer and with the same programming language as the computer that created the file methods print and println – An advantage of binary files is that they are more efficient – These are similar to the System.out methods to process than text files of the same names, but are used for text file – Unlike most binary files, Java binary files have the advantage of being platform independent also output, not screen output Copyright © 2012 Pearson Addison‐Wesley.
    [Show full text]
  • C++ Input/Output: Streams 4
    C++ Input/Output: Streams 4. Input/Output 1 The basic data type for I/O in C++ is the stream. C++ incorporates a complex hierarchy of stream types. The most basic stream types are the standard input/output streams: istream cin built-in input stream variable; by default hooked to keyboard ostream cout built-in output stream variable; by default hooked to console header file: <iostream> C++ also supports all the input/output mechanisms that the C language included. However, C++ streams provide all the input/output capabilities of C, with substantial improvements. We will exclusively use streams for input and output of data. Computer Science Dept Va Tech August, 2001 Intro Programming in C++ ©1995-2001 Barnette ND & McQuain WD C++ Streams are Objects 4. Input/Output 2 The input and output streams, cin and cout are actually C++ objects. Briefly: class: a C++ construct that allows a collection of variables, constants, and functions to be grouped together logically under a single name object: a variable of a type that is a class (also often called an instance of the class) For example, istream is actually a type name for a class. cin is the name of a variable of type istream. So, we would say that cin is an instance or an object of the class istream. An instance of a class will usually have a number of associated functions (called member functions) that you can use to perform operations on that object or to obtain information about it. The following slides will present a few of the basic stream member functions, and show how to go about using member functions.
    [Show full text]
  • L13 Streams and IO
    Binghamton CS-220 University Spring 20162015 Includes & Streams 1 Binghamton CS-220 University Spring 20162015 C Pre-Processor C Program Pre-Processor Pre-processed C Program Header Files Header Files 2 Binghamton CS-220 University Spring 20162015 #include • Two flavors: • #include <abc.h> • Replace this line with the contents of file abc.h found in the system libraries • #include “xyz.h” • Replace this line with the contents of file xyz.h found in the current directory • Concept: Write code once, use it in many different programs • By convention, included files are called “header files” and have a “.h” file type 3 Binghamton CS-220 University Spring 20162015 Header (.h) files • May include any valid C code • may include further #includes • Typically small – only what you need to invoke “outside” functions • Function prototype declarations • Sometimes, data and/or type declarations • Typically, a header file describes a group of functions • “related” functions – e.g. functions which deal with Input and Output • Typically associated with a “.c” file with the same name • .c file contains function definitions – more later 4 Binghamton CS-220 University Spring 20162015 C Standard Library • Part of C itself • Definitions/Descriptions included in C standard • Available with every C compiler • Primarily, a set of C functions we all can use • Keep C language simple • Wrap complicated stuff in function definitions • We don’t need to know about the implementation of the complicated stuff • Full description of standard library available as reference • Programming in C, Appendix B 5 Binghamton CS-220 University Spring 20162015 Standard Input and Output • Need: #include <stdio.h> • Large list of input and output functions to: • Read and write from a “stream” • Open a file and make a stream • Close a file and remove the stream • Create, Rename, delete, or move files • Streams….
    [Show full text]
  • CS2043 - Unix Tools & Scripting Cornell University, Spring 20141
    CS2043 - Unix Tools & Scripting Cornell University, Spring 20141 Instructor: Bruno Abrahao January 31, 2014 1 Slides evolved from previous versions by Hussam Abu-Libdeh and David Slater Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Vim: Tip of the day! Line numbers Displays line number in Vim: :set nu Hides line number in Vim: :set nonu Goes to line number: :line number Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Counting wc How many lines of code are in my new awesome program? How many words are in this document? Good for bragging rights Word, Character, Line, and Byte count with wc wc -l : count the number of lines wc -w : count the number of words wc -m : count the number of characters wc -c : count the number of bytes Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Sorting sort Sorts the lines of a text file alphabetically. sort -ru file sorts the file in reverse order and deletes duplicate lines. sort -n -k 2 -t : file sorts the file numerically by using the second column, separated by a colon Example Consider a file (numbers.txt) with the numbers 1, 5, 8, 11, 62 each on a separate line, then: $ sort numbers.txt $ sort numbers.txt -n 1 1 11 5 5 8 62 11 8 62 Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting uniq uniq uniq file - Discards all but one of successive identical lines uniq -c file - Prints the number of successive identical lines next to each line Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Character manipulation! The Translate Command tr [options] <char_list1> [char_list2] Translate or delete characters char lists are strings of characters By default, searches for characters in char list1 and replaces them with the ones that occupy the same position in char list2 Example: tr 'AEIOU' 'aeiou' - changes all capital vowels to lower case vowels Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Pipes and redirection tr only receives input from standard input (stdin) i.e.
    [Show full text]
  • Shells and Shell Programming
    Shells & Shell Programming (Part A) Software Tools EECS2031 Winter 2018 Manos Papagelis Thanks to Karen Reid and Alan J Rosenthal for material in these slides SHELLS 2 What is a Shell • A shell is a command line interpreter that is the interface between the user and the OS. • The shell: – analyzes each command – determines what actions are to be performed – performs the actions • Example: wc –l file1 > file2 3 Which shell? • sh – Bourne shell – Most common, other shells are a superset – Good for programming • csh or tcsh – command-line default on EECS labs – C-like syntax – Best for interactive use. • bash – default on Linux (Bourne again shell) – Based on sh, with some csh features. • korn – written by David Korn – Based on sh – Some claim best for programming. – Commercial product. 4 bash versus sh • On EECS labs, when you run sh, you are actually running bash. • bash is a superset of sh. • For EECS2031, you will be learning only the features of the language that belong to sh. 5 Changing your shell • I recommend changing your working shell on EECS to bash – It will make it easier to test your shell programs. – You will only need to learn one set of syntax. • What to do: – echo $SHELL (to check your current shell) – chsh <userid> bash – Logout and log back in. – .profile is executed every time you log in, so put your environment variables there 6 Standard Streams • Preconnected input and output channels between a computer program and its environment. There are 3 I/O connections: – standard input (stdin) – standard output (stdout) – standard
    [Show full text]
  • Alex Scriven Data Scientist Introduction to the Course This Course Will Cover
    Introduction and refresher I N T R O D U C T I O N TO B A S H S C R I P T I N G Alex Scriven Data Scientist Introduction to the course This course will cover: Moving from command-line to a Bash script Variables and data types in Bash scripting Control statements Functions and script automation INTRODUCTION TO BASH SCRIPTING Why Bash scripting? (Bash) Firstly, let's consider why Bash? Bash stands for 'Bourne Again Shell' (a pun) Developed in the 80's but a very popular shell today. Default in many Unix systems, Macs Unix is the internet! (Running ML Models, Data Pipelines) AWS, Google, Microso all have CLI's to their products INTRODUCTION TO BASH SCRIPTING Why Bash scripting? (scripting!) So why Bash scripting? Ease of execution of shell commands (no need to copy-paste every time!) Powerful programming constructs INTRODUCTION TO BASH SCRIPTING Expected knowledge You are expected to have some basic knowledge for this course. Understand what the command-line (terminal, shell) is Have used basic commands such as cat , grep , sed etc. If you are rusty, don't worry - we will revise this now! INTRODUCTION TO BASH SCRIPTING Shell commands refresher Some important shell commands: (e)grep lters input based on regex paern matching cat concatenates le contents line-by-line tail \ head give only the last -n (a ag) lines wc does a word or line count (with ags -w -l ) sed does paern-matched string replacement INTRODUCTION TO BASH SCRIPTING A reminder of REGEX 'Regex' or regular expressions are a vital skill for Bash scripting.
    [Show full text]
  • Deepfreeze: a Management Interface for ISEAGE Nathan Lyle Karstens Iowa State University
    Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 2007 DeepFreeze: a management interface for ISEAGE Nathan Lyle Karstens Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Computer Sciences Commons Recommended Citation Karstens, Nathan Lyle, "DeepFreeze: a management interface for ISEAGE" (2007). Retrospective Theses and Dissertations. 14559. https://lib.dr.iastate.edu/rtd/14559 This Thesis is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. DeepFreeze: a management interface for ISEAGE by Nathan Lyle Karstens A thesis submitted to the graduate faculty in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Co-majors: Information Assurance; Computer Engineering Program of Study Committee: Doug W Jacobson, Major Professor Thomas Earl Daniels Johnny S Wong Iowa State University Ames, Iowa 2007 Copyright © Nathan Lyle Karstens, 2007. All rights reserved. UMI Number: 1443093 UMI Microform 1443093 Copyright 2007 by ProQuest Information and Learning Company. All rights reserved. This microform edition is protected against unauthorized copying under Title 17, United States Code. ProQuest Information and Learning Company
    [Show full text]
  • Hands-On UNIX System Administration Decal Lecture 1 — 24 January 2011 Found the Right Room?
    Welcome and Intro Hands-On UNIX System Administration DeCal Lecture 1 — 24 January 2011 Found the right room? • You’re in CS 98/198-8, the Hands-On UNIX System Administration DeCal. • No experience with *nix required, but be ready to learn fast! (Ask questions!) • We’re diving in right after this mini intro. Who are we? • Jordan Salter — 3rd year L&S CS2 major. Itinerant sysadmin and senior root staff member at the Open Computing Facility. • Eugene Baumstein — 2nd year EECS student. Developer at Yelp, Inc. What’s UNIX? http://en.wikipedia.org/wiki/File:Unix_history.svg source: source: What’s sysadminning? source: http://xkcd.com/705 Course logistics • This is a lecture/lab based course: Each class has a lab assignment, due by the start of next week’s meeting. • There’s a !nal project! You’ll do it in groups of four — more about this later. • To earn a “P”: attend every class, attempt each lab, do the #nal project. (2 drops.) Course logistics • If you’re on the waiting list, stick around in case anyone drops the class. If you hope to add … try again next semester. • There aren’t enough computers — please bring a laptop to work on, if you can! In a nutshell mv cd ls cat pwd find locate sed bash awk vi less ssh cp The shell • The shell is your gateway to the system. It’s an ordinary program — sh, bash, csh, ksh, tcsh, zsh, fish… • You can access and modify the #lesystem, run programs, and administer the system. • It makes your life easier with automation: shell scripting is a wonderful thing! Basic commands • ls: list directory contents • pwd: print working directory • cd: change working directory • mkdir: make directory • rmdir: remove directory Basic commands • mv: move #les/directories • cp: copy a #le • rm: remove a #le • less (more): scroll (“page”) through text • grep: search text for a speci#ed pattern RTFM • Programs have command line options.
    [Show full text]
  • Software Systems Components 1
    SSC1: I/O Volker Sorge Overview I/O Streams Basic Streams Data Streams Software Systems Components 1 Standard Streams I/O Redirection Input/Output Cmd Line Input Formatted I/O Formatted Output Formatted Input Volker Sorge Buffered Streams Memory Mapping http://www.cs.bham.ac.uk/~vxs/teaching/ssc1 File System Manipulations Polling Topic Overview SSC1: I/O Volker Sorge Overview I/O Streams Basic Streams Data Streams 1. Simple Input/Output: streams for various types, Standard Streams I/O Redirection redirection. java.io.* Cmd Line Input 2. Formatted Input/Output: dealing with mixed input, Formatted I/O Formatted Output formatting output. java.util.Scanner, Formatted Input java.util.Formatter Buffered Streams 3. Advanced Techniques: buffering, file system Memory Mapping File System manipulations, memory mapping, polling, Manipulations ... java.nio.* Polling Simple Input/Output Techniques SSC1: I/O Volker Sorge Overview I/O Streams Basic Streams Data Streams Standard Streams I/O Redirection I Streams: the basis of all data input/output Cmd Line Input Redirecting Standard Input/Output: turning Formatted I/O I Formatted Output System.in, System.out into streams Formatted Input Buffered Streams Console: some specialities dealing with direct input and I Memory Mapping passwords File System Manipulations Polling What is a stream SSC1: I/O Volker Sorge Overview I/O Streams Basic Streams I Streams are an abstraction over the actual low-level Data Streams operations of data handling. Standard Streams I/O Redirection I Streams enable a programming language to implement Cmd Line Input a uniform interface to the communication infrastructure Formatted I/O Formatted Output of diverse devices (files, sockets, hardware devices, etc.) Formatted Input Buffered Streams I A stream can be viewed as a sequence of data elements Memory Mapping I A stream represent either a data source (input) or data File System sink (output) Manipulations Polling I There are different type of streams depending on what data s communicated and how.
    [Show full text]
  • The Next Generation Control System of Ganil
    THE NEXT GENERATION CONTROL SYSTEM OF GANIL T.T. Luong, L. David, E. Lécorché, M. Ulrich GANIL, BP 5027 -14021 Caen Cedex - France ICALEPCS'91 International Conference on Accelerator and Large Experimental Physics Control Systems November 11-15, 1991 Tsukuba, Japan GANIL A92.01 The Next Generation Control System of GANIL T.T. Luong, L. David, E. Lécorché, M. Ulrich Grand Accélérateur National d'Ions Lourds BP 5027 - F 14021 CAEN Cedex, FRANCE Abstract This facility provides the experimenters with fast heavy ion beams for fundamental research in the fields of nuclear The existing computer control system of GANIL is being physics, atomic physics and solid state physics, as well as for renewed to fulfil the increasing requirements of the accelerator industrial applications. operation. This medium term major improvement is aiming at Significant upgrades were carried out these last few years providing the physicists with a wider range of ion beams of to augment the energy of heaviest ion beams and to increase higher quality under more flexible and reliable conditions. their intensities by making use of new ECR source. This paper gives a short description of the new control Acceleration at GANIL henceforth encompasses ion species, system envisioned. It consists of a three layer distributed from carbon to uranium, with beam energy ranging from up to architecture federating a VAX6000-410/VMS host computer, a 95 MeV per nucléon for the ions with masses up to 40 u to real time control system made up of a dual host VAX3800 and 24 MeV per nucléon for the heaviest ions.
    [Show full text]
  • Command Line Initiation
    Linux command line Initiation 2020 Christof De Bo Agenda UNIX fundamentals UNIX file system Command line + operations on files Standard output, input and building pipelines Text mining Scripting Linux training setup VNC Viewer for Google Chrome IP: 35.241.215.2:590X (1-5) IP: 35.187.88.121:590X (1-5) IP: 35.241.215.2:590X (1-5) IP: 35.187.88.121:590X (1-5) Password: TrainingVIBX Training material Slides and exercises https://material.bits.vib.be/topics/linux/ What can Linux/this course do for you? Why use Linux? What is the difference with other operating systems? Only for bioinformaticians? Is it really for free? …? UNIX fundamentals UNIX family UNIX is a family of computer operating systems UNIX key features Multiuser Possible to connect to the same server (remote) and execute different programs at the same time Multitasking Multiple processes can run on the same machine at the same time Networking The network is essential for remote access Various user interfaces Both text-only and graphical interfaces are available UNIX OS What? Collection of software that manages computer hardware resources and provides common services for programs Kernel An OS kernel manages computer resources (e.g. CPU, RAM, internal/external devices) and allows programs to use these resources Shell = Command Line Interpreter (CLI) is a text-only interface between the user and the kernel. Its function is to execute commands from the terminal window Programs External programs can be installed. The OS comes with many built-in utilities GNU/Linux Linux kernel GNU Linux kernel Takes care of managing computer recources GNU Provides the means of communication with the linux kernel through command Linux distributions Linux is a core operating system and can be used to build your own flavor if Linux.
    [Show full text]