Pre-Cut Ready to Install Kits Year • Make • Model Specific 1963-76

Home , Dodge Charger (B-body), Dodge Dart, Plymouth (automobile), Plymouth Barracuda

1963-76 MOPAR Muscle Automotive Thermal Acoustic Insulation A-Body, B-Body, C-Body, E-Body

Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

•Reduce Road Noise •Reduce Exhaust Harmonics Pre-Cut Ready to Install Kits •Eliminate Mechanical Noise •Stop Body Panel Vibration Year • Make • Model Specific •Reduce Radiated & Reflected Heat •Stop Audio System Vibration The Coolest Cars Have QuietRIDE Inside! ™

Kits are available for these Vehicles See AcoustiTrunk Catalog

Roof Kit Roof & Quarter Panels above beltline. Trunk Floor Kit Firewall Insulator Trunk Floor & Tire Well Fits under dash against the firewall bulkhead.

Kits are available for these Vehicles See AcoustiHood Catalog Body Panel Kit

Floor Kit Front Floor, Rear Floor, Transmission Door Kit Hump/ Driveline All Doors

Cowl Kit Panels between the firewall and front door of the vehicle.

Everything in One Box to Do the Job Right! Pre-Cut, Ready To install Kits are Year, Make and Model Specific and include: •Dynamat Xtreme •Heat Shield Barrier Insulation Order Line: 888-777-3410 Tech Line: 209-942-4777 •Spray Adhesive •Seam Tape Fax: 877-720-2360 •Illustrated Instructions 1122 S. Wilson Way Ste. #1, Stockton CA, 95205

Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

Introducing a multi-stage, automotive insulation and sound damping system to give Mopar cars the “quiet riding comfort” found in today’s new cars. AcoustiSHIELD kits are designed on current “state- of-the-art” auto acoustic technology, to insulate and control the noise, vibration and heat in the assenger cabin. Kits are pre-cut and come with easy-to-follow installation instructions-----everything you need to do the job right. MOPAR Chrysler - Dodge Underhood Cover and Insulation Plymouth Smooth Hood Covers For Restoration - 3-D Molded Hood Covers For That Custom Look

Under Hood Covers are manufactured to Tough, High Temperature ABS Cover cover the structural ribs on the under side with HeatShield Insulation Panels of the hood surface of your vehicle to give a clean, Pre-Cut, Ready to Install Kits finished look to the engine Mounting Pins and Illustrated Instructions included compartment. Year, Make and Model Specific

A-Body Cars--Dodge Dart, Demon, Swinger A-Body Cars--Plymouth Barracuda, ‘cuda, Duster, Scamp, Valiant B-Body Cars--Dodge Charger, Coronet, Dart, Polara, Super Bee B-Body Cars--Plymouth Belvedere, Fury, GTX, Road Runner, Savoy, Satellite, Sport Fury, Sebring C-Body Cars--Dodge Custom 880, Monaco, Polara C-Body Cars--Plymouth Fury, Sport Fury C-Body Cars--Chrysler 300, New Yorker, Newport E-Body Cars--Dodge and Plymouth Barracuda, ‘cuda, Challenger

Watch our “How To” video on the Installation of a typical Under Hood Cover and Insulation

Go to: youtube.com/quietridesolutions

MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT, Order Line: 888-777-3410 CHRYSLER and related logos, vehicle model names and trade Tech Line: 209-942-4777 dress are trademarks of Chrysler Group LLC used under licenseby QuietRide Solutions LLC. © 2021 Chrysler Group LLC. Fax: 877-720-2360 1122 S. Wilson Way Ste. #1, Stockton CA, 95205 For more information contact us at: [email protected] ©2003-21 •Prices Subject to Change Without Notice 1935-2014

Ram/Dodge1963-76 Truck Catalog MOPAR Muscle Automotive Thermal Acoustic Insulation A-Body, B-Body, C-Body, E-Body Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

MOPAR A-Body Cars 1963-1976 MOPAR-A 6769-CFK 1967-1969 Mopar A Body Coupe Floor Kit 261 Dodge Dart, Duster, Swinger-Plymouth Valiant and Barracuda MOPAR-A 6769-CRK 1967-1969 Mopar A Body Coupe Roof Kit 146 Inventory # Description Price MOPAR-A 6769-CTK 1967-1969 Mopar A Body Coupe Trunk Kit 146 1963-66 MOPAR A-Body Coupe ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR-A 6366-CAK 1963-66 Mopar A-Body Coupe Complete Kit 775 MOPAR-A 6366-CBPK 1963-66 Mopar A-Body Coupe Body Panel Kit 146 1967-69 MOPAR A Body Convertible MOPAR-A 6366-CCK 1963-66 Mopar A-Body Coupe Cowl Kit 58 MOPAR-A 6769-CVAK 1967-1969 Mopar A Body Convert Complete Kit 639 MOPAR-A 6366-CFK 1963-66 Mopar A-Body Coupe Floor Kit 261 MOPAR-A 6769-CVBPK 1967-1969 Mopar A Body Convert Body Panel Kit 146 MOPAR-A 6366-CRK 1963-66 Mopar A-Body Coupe Roof Kit 146 MOPAR-A 6769-CVCK 1967-1969 Mopar A Body Convert Cowl Kit 58 MOPAR-A 6366-CTK 1963-66 Mopar A-Body Coupe Trunk Kit 146 MOPAR-A 6769-CVFK 1967-1969 Mopar A Body Convert Floor Kit 261 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR-A 6769-CVTK 1967-1969 Mopar A Body Convert Trunk Kit 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1963-66 MOPAR-A Body Convertible MOPAR-A 6366-CVAK 1963-66 Mopar A-Body Convert Complete Kit 639 1967-69 MOPAR-A Body Fastback MOPAR-A 6366-CVBPK 1963-66 Mopar A-Body Convert Body Panel Kit 146 MOPAR-A 6769-FBAK 1967-1969 Mopar A-Body FB Complete Kit 792 MOPAR-A 6366-CVCK 1963-66 Mopar A-Body Convert Cowl Kit 58 MOPAR-A 6769-FBBPK 1967-1969 Mopar A-Body FB Body Panel Kit 163 MOPAR-A 6366-CVFK 1963-66 Mopar A-Body Convert Floor Kit 261 MOPAR-A 6769-FBCK 1967-1969 Mopar A-Body FB Cowl Kit 58 MOPAR-A 6366-CVTK 1963-66 Mopar A-Body Convert Trunk Kit 146 MOPAR-A 6769-FBFK 1967-1969 Mopar A-Body FB Floor Kit 261 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR-A 6769-FBRK 1967-1969 Mopar A-Body FB Roof Kit 146 MOPAR-A 6769-FBTK 1967-1969 Mopar A-Body FB Trunk Kit 146 1963-66 MOPAR-A Body Fastback ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR-A 6366-FBAK 1963-66 Mopar A-Body FB Complete Kit 792 MOPAR-A 6366-FBBPK 1963-66 Mopar A-Body FB Body Panel Kit 163 1967-69 MOPAR-A Body Sedan MOPAR-A 6366-FBCK 1963-66 Mopar A-Body FB Cowl Kit 58 MOPAR-A 6769-SAK 1967-1969 Mopar A Body Sedan Complete Kit 822 MOPAR-A 6366-FBFK 1963-66 Mopar A-Body FB Floor Kit 261 MOPAR-A 6769-SBPK 1967-1969 Mopar A Body Sedan Body Panel Kit 131 MOPAR-A 6366-FBRK 1963-66 Mopar A-Body FB Roofl Kit 146 MOPAR-A 6769-SCK 1967-1969 Mopar A Body Sedan Cowl Kit 58 MOPAR-A 6366-FBTK 1963-66 Mopar A-Body FB Trunk Kit 146 MOPAR-A 6769-SFK 1967-1969 Mopar A Body Sedan Floor Kit 261 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR-A 6769-SRK 1967-1969 Mopar A Body Sedan Roof Kit 146 MOPAR-A 6769-STK 1967-1969 Mopar A Body Sedan Trunk Kit 146 1963-66 MOPAR-A Body Sedan ASU-DDBIK-4 Universal 4 Door Damper Kit 131 MOPAR-A 6366-SAK 1963-66 Mopar A-Body Sedan Complete Kit 822 MOPAR-A 6366-SBPK 1963-66 Mopar A-Body Sedan Body Panel Kit 131 1970-76 MOPAR-A Body Coupe MOPAR-A 6366-SCK 1963-66 Mopar A-Body Sedan Cowl Kit 58 MOPAR-A 7076-CAK 1970-1976 Mopar A Body Coupe Complete Kit 817 MOPAR-A 6366-SFK 1963-66 Mopar A-Body Sedan Floor Kit 261 MOPAR-A 7076-CBPK 1970-1976 Mopar A Body Coupe Body Panel Kit 146 MOPAR-A 6366-SRK 1963-66 Mopar A-Body Sedan Roof Kit 146 MOPAR-A 7076-CCK 1970-1976 Mopar A Body Coupe Cowl Kit 101 MOPAR-A 6366-STK 1963-66 Mopar A-Body Sedan Trunk Kit 146 MOPAR-A 7076-CFK 1970-1976 Mopar A Body Coupe Floor Kit 261 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 MOPAR-A 7076-CRK 1970-1976 Mopar A Body Coupe Roof Kit 146

1967-69 MOPAR-A Body Coupe MOPAR-A 7076-CTK 1970-1976 Mopar A Body Coupe Trunk Kit 146 MOPAR-A 6769-CAK 1967-1969 Mopar A Body Coupe Complete Kit 775 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR-A 6769-CBPK 1967-1969 Mopar A Body Coupe Body Panel Kit 146 MOPAR-A 6769-CCK 1967-1969 Mopar A Body Coupe Cowl Kit 58 Inventory # Description Price Inventory # Description Price

1970-76 MOPAR-A Body Convertible 1971-74 MOPAR-B Body Coupe MOPAR-A 7076-CVAK 1970-1976 Mopar A Body Convert Complete Kit 681 MOPAR-B 7174-CAK 1971-1974 Mopar B-Body Coupe Complete Kit 775 MOPAR-A 7076-CVBPK 1970-1976 Mopar A Body Convert Body Panel Kit 146 MOPAR-B 7174-CBPK 1971-1974 Mopar B-Body Coupe Body Panel Kit 146 Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat MOPAR-A 7076-CVCK 1970-1976 Mopar A Body Convert Cowl Kit 101 MOPAR-B 7174-CCK 1971-1974 Mopar B-Body Coupe Cowl Kit 58 MOPAR-A 7076-CVFK 1970-1976 Mopar A Body Convert Floor Kit 261 MOPAR-B 7174-CFK 1971-1974 Mopar B-Body Coupe Floor Kit 261 MOPAR-A 7076-CVTK 1970-1976 Mopar A Body Convert Trunk Kit 146 MOPAR-B 7174-CRK 1971-1974 Mopar B-Body Coupe Roof Kit 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR-B 7174-CTK 1971-1974 Mopar B-Body Coupe Trunk Kit 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1970-76 MOPAR-A Body Sedan MOPAR-A 7076-SAK 1970-1976 Mopar A Body Sedan Complete Kit 864 1971-74 MOPAR-B Body Sedan MOPAR-A 7076-SBPK 1970-1976 Mopar A Body Sedan Body Panel Kit 131 MOPAR-B 7174-SAK 1971-74 Mopar B-Body Sedan Complete Kit 822 MOPAR-A 7076-SCK 1970-1976 Mopar A Body Sedan Cowl Kit 101 MOPAR-B 7174-SBPK 1971-74 Mopar B-Body Sedan Body Panel Kit 131 MOPAR-A 7076-SFK 1970-1976 Mopar A Body Sedan Floor Kit 261 MOPAR-B 7174-SCK 1971-74 Mopar B-Body Sedan Cowl Kit 58 MOPAR-A 7076-SRK 1970-1976 Mopar A Body Sedan Roof Kit 146 MOPAR-B 7174-SFK 1971-74 Mopar B-Body Sedan Floor Kit 261 MOPAR-A 7076-STK 1970-1976 Mopar A Body Sedan Trunk Kit 146 MOPAR-B 7174-SRK 1971-74 Mopar B-Body Sedan Roof Kit 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 MOPAR-B 7174-STK 1971-74 Mopar B-Body Sedan Trunk Kit 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 MOPAR-B Body Cars 1968-1977 Charger, Cornet, Superbee, GTX, Belevedere, Road Runner 1975-77 MOPAR-B Body Coupe MOPAR-B 7577-CAK 1975-1977 Mopar B-Body Coupe Complete Kit 776 1968-70 MOPAR B-Body Coupe MOPAR-B 7577-CBPK 1975-1977 Mopar B-Body Coupe Body Panel Kit 146 MOPAR-B 6870-CAK 1968-70 Mopar B-Body Coupe Complete Kit 775 MOPAR-B 7577-CCK 1975-1977 Mopar B-Body Coupe Cowl Kit 58 MOPAR-B 6870-CBPK 1968-70 Mopar B-Body Coupe Body Panel Kit 146 MOPAR-B 7577-CFK 1975-1977 Mopar B-Body Coupe Floor Kit 261 MOPAR-B 6870-CCK 1968-70 Mopar B-Body Coupe Cowl Insualtion Kit 58 MOPAR-B 7577-CRK 1975-1977 Mopar B-Body Coupe Roof Kit 146 MOPAR-B 6870-CFK 1968-70 Mopar B-Body Coupe Floor Kit 261 MOPAR-B 7577-CTK 1975-1977 Mopar B-Body Coupe Trunk Kit 146 MOPAR-B 6870-CRK 1968-70 Mopar B-Body Coupe Roof Kit 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR-B 6870-CTK 1968-70 Mopar B-Body Coupe Trunk Kit 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1975-77 MOPAR-B Body Sedan MOPAR-B 7577-SAK 1975-1977 Mopar B-Body Sedan Complete Kit 823 1968-70 MOPAR B-Body Convertible MOPAR-B 7577-SBPK 1975-1977 Mopar B-Body Sedan Body Panel Kit 131 MOPAR-B 6870-CVAK 1968-70 Mopar B-Body Convert Complete Kit 639 MOPAR-B 7577-SCK 1975-1977 Mopar B-Body Sedan Cowl Kit 58 MOPAR-B 6870-CVBPK 1968-70 Mopar B-Body Convert Body Panel Kit 146 MOPAR-B 7577-SFK 1975-1977 Mopar B-Body Sedan Floor Kit 261 MOPAR-B 6870-CVCK 1968-70 Mopar B-Body Convert Cowl Kit 58 MOPAR-B 7577-SRK 1975-1977 Mopar B-Body Sedan Roof Kit 146 MOPAR-B 6870-CVFK 1968-70 Mopar B-Body Convert Floor Kit 261 MOPAR-B 7577-STK 1975-1977 Mopar B-Body Sedan Trunk Kit 146 MOPAR-B 6870-CVTK 1968-70 Mopar B-Body Convert Trunk Kit 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR C Body Cars 1965-1968 1968-70 MOPAR B-Body Sedan Chrysler 300, Fury, Polara, Newport, New Yorker, Monaco MOPAR-B 6870-SAK 1968-70 Mopar B-Body Sedan Complete Kit 822 MOPAR-B 6870-SBPK 1968-70 Mopar B-Body Sedan Body Panel Kit 131 1965-68 MOPAR-C Body Coupe MOPAR-B 6870-SCK 1968-70 Mopar B-Body Sedan Cowl Kit 58 MOPAR-C 6568-CAK 1965-1968 Mopar C-Body Coupe Complete Kit 817 MOPAR-B 6870-SFK 1968-70 Mopar B-Body Sedan Floor Kit 261 MOPAR-C 6568-CBPK 1965-1968 Mopar C-Body Coupe Body Panel Kit 146 MOPAR-B 6870-SRK 1968-70 Mopar B-Body Sedan Roof Kit 146 MOPAR-C 6568-CCK 1965-1968 Mopar C-Body Coupe Cowl Kit 101 MOPAR-B 6870-STK 1968-70 Mopar B-Body Sedan Trunk Floor Kit 146 MOPAR-C 6568-CFK 1965-1968 Mopar C-Body Coupe Floor Kit 261 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 MOPAR-C 6568-CRK 1965-1968 Mopar C-Body Coupe Roof Kit 146 MOPAR-C 6568-CTK 1965-1968 Mopar C-Body Coupe Trunk Kit 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1960-76 MOPAR “A” Body Car 1965-68 MOPAR-C Body Convertible MOPAR-C 6568-CVAK 1965-1968 Mopar C-Body Convert Complete Kit 681 Firewall Insulator Panels MOPAR-C 6568-CVBPK 1965-1968 Mopar C-Body Convert Body Panel Kit 146 MOPAR-C 6568-CVCK 1965-1968 Mopar C-Body Convert Cowl Kit 101 The Firewall bulkhead in 1960s and 1970’s MOPAR-C 6568-CVFK 1965-1968 Mopar C-Body Convert Floor Kit 261 MOPAR cars was commonly shared across MOPAR-C 6568-CVTK 1965-1968 Mopar C-Body Convert Trunk Kit 146 Dodge and Plymouth “A” Body production ASU-DDBIK-2 Universal 2 Door Damper Kit 67 lines. 1965-68 MOPAR-C Body Sedan Dodge---Dart, Demon and Lancer MOPAR-C 6568-SAK 1965-1968 Mopar C-Body Sedan Complete Kit 864 Plymouth---Barracuda, Duster, Scamp and MOPAR-C 6568-SBPK 1965-1968 Mopar C-Body Sedan Body Panel Kit 131 Valiant MOPAR-C 6568-SCK 1965-1968 Mopar C-Body Sedan Cowl Kit 101 MOPAR-C 6568-SFK 1965-1968 Mopar C-Body Sedan Floor Kit 261 MOPAR-C 6568-SRK 1965-1968 Mopar C-Body Sedan Roof Kit 146 1971-74 MOPAR “B” Body Car MOPAR-C 6568-STK 1965-1968 Mopar C-Body Sedan Trunk Kit 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 Firewall Insulator Panels Other MOPAR 1965-68 C-Body Products (Sold Separately) The Firewall bulkhead in 1960s and 1970’s MOPAR-C 6568-AC 1965-1968 Mopar C-Body Firewall (Factory AC) 155 MOPAR cars was commonly shared across MOPAR-C 6568-HC 1965-1968 Mopar C-Body Firewall (Heater only) 155 Dodge and Plymouth “B” Body production MOPAR-C 6568-CSD 1965-1968 Mopar C-Body Coupe Seat Divider 104 lines. MOPAR-C 6568-CVSD 1965-1968 Mopar C-Body Convert Seat Divider 92 Charger, Coronet, Dart, Magnum, Monaco and Polara MOPAR E Body Cars 1970-1974 Belvedere, Fury, GTX, Road Runner, Challenger and Barracuda Satellite and Savoy

1970-74 MOPAR-E Body Coupe MOPAR-E 7074-CAK 1970-74 Mopar E-Body Coupe Complete Kit 775 MOPAR-E 7074-CBPK 1970-74 Mopar E-Body Coupe Body Panel Kit 146 1965-72 MOPAR “C” Body Car MOPAR-E 7074-CCK 1970-74 Mopar E-Body Coupe Cowl Kit 58 MOPAR-E 7074-CFK 1970-74 Mopar E-Body Coupe Floor Kit 261 Firewall Insulator Panels MOPAR-E 7074-CRK 1970-74 Mopar E-Body Coupe Roof Kit 146 MOPAR-E 7074-CTK 1970-74 Mopar E-Body Coupe Trunk Kit 146 The Firewall bulkhead in 1960s and 1970’s ASU-DDBIK-2 Universal 2 Door Damper Kit 67 MOPAR cars was commonly shared across Chrysler, Dodge and Plymouth “C” Body 1970-74 MOPAR-E Body Convertible production lines. MOPAR-E 7074-CVAK 1970-74 Mopar E-Body Convert Complete Kit 639 MOPAR-E 7074-CVBPK 1970-74 Mopar E-Body Convert Body Panel Kit 146 Imperial, New Yorker, Newport, 300 and MOPAR-E 7074-CVCK 1970-74 Mopar E-Body Convert Cowl Kit 58 Town and Country MOPAR-E 7074-CVFK 1970-74 Mopar E-Body Convert Floor Kit 261 Monaco, Polara and 880 MOPAR-E 7074-CVTK 1970-74 Mopar E-Body Convert Trunk Kit 146 Fury, Gran Fury and VIP ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1071-71 Dodge Polara 1970-74 MOPAR “E” Body Car DODGE 7172-PT 1971-1972 Dodge Polara Package Tray 129 Firewall Insulator Panels The Firewall bulkhead in 1970’s MOPAR cars was commonly shared across Dodge and Plymouth “E” Body production lines. Challenger, Baracuda and ‘Cuda The barrier between your engine noise and heat and YOU. Every Quiet Ride Firewall Insulator product is based on an out-the-car or truck original provided by a customer to us over the years. We now manufacture more that 600 different firewall products--1927 through 1996--from the molds that we have developed to fit the OEM engine setback and transmission hump of each vehicle. Firewall insulator panels are year -make- model specific; vacuum formed from a variety of materials; digitally cut to exacting specifications and come fully insulated and ready-to-install. They “fit the firewall bulkhead like a glove” and have earned the reputation--- “Concours Quality.” Here is a Head-to-Head Comparison between the typical $69 firewall insulator and a QRS Firewall Insulator.

•Firewall Insulator is not authentic to OEM specifications. •Firewall Insulator exceeds OEM specifications. •Die-Cut from flat rubber or cardboard material--no defined •Molded from well defined textured ABS material (Chicken texture. Track or Leather Grain) or a “High Definition Satchel finish •Holes don’t line up to fit over the engine setback hump or vinyl rubber material. other firewall contours. •Holes line up every time because it is molded. •Material cracks or breaks when shipped or handled. •ABS Material is flexible, yet ridgid, soil and scuff resistant. •Material is easily soiled, bruised and scuffed by feet. •High Def Vinyl Rubber is soil and scuff resistent. •Insulator is a “bummer” to install because it will not fit over •Insulator is easy to install because it is designed for each the compound curves of the firewall set-back or transmis- specific vehicle to fit over firewall set-back and transmission sion hump. hump. •Product fits like a “square peg in a round hole.” •Product “Fits Like a Glove.”

Leather Grain ABS Texture with Fiberglass Ford-GM-Chrysler-AMC 1949-mid 1970’s The Leather Grain texture was used on firewall insulator coves by General Motors, Chrysler, American Motors and Willys/Jeep and Ford Vehicles from 1949 through mid- 1970s. It replaces the traditional hot-stamped “oil laminated tar paper board” used for the firewall insulator cover along with a combination of insulation materials including “horse hair,” cardboard and the “fluffy” fiberglass insulation of the 1950s, 60s. and 70s. Advanced black fiberglass material is much stronger and more dense, yet plyable, yielding a high- er thermal rating than original materials. Ready to install. 1963-76 Stop Engine Heat at the Source MOPAR Muscle A-Body, B-Body, C-Body, E-Body Made Right - To Fit Right -- To Stop Engine Heat MOPAR A-Body Firewall Insulators Dodge Dart, Demon, Lancer Plymouth Barracuda, Duster, Scamp, Valiant MOPAR-A 6062-HC 1960-1962 MOPAR A-Body Firewall Insulator Panel w/Heater 79 MOPAR-A 6364-HC 1963-1964 MOPAR A-Body Firewall Insulator Panel w/Heater 89 MOPAR-A 6366-AC 1963-1966 MOPAR A-Body Firewall Insulator Panel w/AC 79 MOPAR-A 6566-HC 1965-1966 MOPAR A-Body Firewall Insulator Panel w/Heater 79 MOPAR-A 6769-AC 1967-1969 MOPAR A-Body Firewall Insulator Panel w/AC 79 MOPAR-A 6769-HC 1967-1969 MOPAR A-Body Firewall Insulator Panel w/Heater 79 MOPAR-A 7076-HC 1970-1976 MOPAR A-Body Firewall Insulator Panel w/Heater 79 MOPAR-A 7076-AC 1970-1976 MOPAR A-Body Firewall Insulator Panel w/AC 89 MOPAR B-Body Firewall Insulators Dodge Charger, Coronet, Dart, Magnum, Monaco, Polara Plymouth Belevedere, Fury, GTX, Road Runner, Satellite, Savoy MOPAR-B 6264-HC 1962-1964 MOPAR B-Body Firewall Insulator Panel w/Heater 79 MOPAR-B 6365-HVAC 1963-1965 MOPAR B-Body Firewall Insulator Panel Heater or AC 79 MOPAR-B 6670-AC 1966-1970 MOPAR B-Body Firewall Insulator Panel w/AC 89 MOPAR-B 6670-CPKG 1966-1970 MOPAR B-Body Coupe Package Tray 49 MOPAR-B 6670-HC 1966-1970 MOPAR B-Body Firewall Insulator Panel w/Heater 79 MOPAR-B 7174-AC 1971-1974 MOPAR B-Body Firewall Insulator Panel w/AC 79 MOPAR-B 7174-CPKG 1971-1974 MOPAR B-Body Coupe Package Tray 49 MOPAR-B 7174-CSD 1971-1974 MOPAR B-Body Coupe Seat Divider 79 MOPAR-B 7174-HC 1971-1974 MOPAR B-Body Firewall Insulator Panel w/Heater 79 MOPAR C-Body Firewall Insulators Polara, New Yorker, Newport, Monaco, Custom 880 MOPAR-C 6568-AC 1965-1968 MOPAR C-Body Firewall Insulator Panel w/Factory AC 79 MOPAR-C 6568-CSD 1965-1968 MOPAR C-Body Coupe Seat Divider 79 MOPAR-C 6568-HC 1965-1968 MOPAR C-Body Firewall Insulator Panel w/Heater 79 MOPAR-C 7172-CPKG 1971-1972 MOPAR-C Coupe Package Tray w/Speaker Grills 129 MOPAR E-Body Firewall Insulators Challenger, Barracuda and ‘Cuda MOPAR-E 7074-AC 1970-1974 MOPAR E-Body Car Firewall Insulator Panel w/AC 9 MOPAR-E 7074-HC 1970-1974 MOPAR E-Body Car Firewall Insulator Panel w/Heater 79

See Firewall Insulator products at the end of this catalog. 1963-66 MOPAR A-Body Coupe Complete AcoustiShield Insulation Kit MOPARA 6366-CAK Automotive Thermal Acoustic Insulation Barracuda-Dart-Valiant Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1963-66 MOPAR A-Body Convertible Complete AcoustiShield Insulation Kit MOPARA 6366-CVAK Automotive Thermal Acoustic Insulation Barracuda-Dart-Valiant Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1963-66 MOPAR A-Body Sedan Complete AcoustiShield Insulation Kit MOPARA 6366-SAK Automotive Thermal Acoustic Insulation Dart-Valiant Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit For 4-Door Sedans with upholstered door & panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- sided foam tape and Instructions. Easy to Kits are available for this Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1967-69 MOPAR A-Body Coupe Complete AcoustiShield Insulation Kit MOPARA 6769-CAK Automotive Thermal Acoustic Insulation Dart-Demon-Swinger-Barracuda-Valiant Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1967-69 MOPAR A-Body Convertible Complete AcoustiShield Insulation Kit MOPARA 6769-CVAK Automotive Thermal Acoustic Insulation Dart-Demon-Swinger-Barracuda-Valiant Cowl Kit Floor Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1967-69 MOPAR A-Body Sedan Complete AcoustiShield Insulation Kit MOPARA 6769-SAK Automotive Thermal Acoustic Insulation Dart-Demon-Swinger-Valiant Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit For 4-Door Sedans with upholstered door & panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- sided foam tape and Instructions. Easy to Kits are available for this Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1967-69 MOPAR A-Body Fast Back Complete AcoustiShield Insulation Kit MOPARA 6769-FBAK Automotive Thermal Acoustic Insulation

Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1970-76 MOPAR A-Body Coupe Complete AcoustiShield Insulation Kit MOPARA 7076-CAK Automotive Thermal Acoustic Insulation Dart-Demon-Swinger--Duster-Scamp Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1970-76 MOPAR A-Body Convertible Complete AcoustiShield Insulation Kit MOPARA 7076-CVAK Automotive Thermal Acoustic Insulation Dart-Demon-Swinger--Duster-Scamp Cowl Kit Floor Kit

Body Panel Kit

Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1970-76 MOPAR A-Body Sedan Complete AcoustiShield Insulation Kit MOPARA 7076-SAK Automotive Thermal Acoustic Insulation Dart-Demon-Swinger--Duster-Scamp Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1968-70 MOPAR B-Body Coupe Complete AcoustiShield Insulation Kit MOPARB 6870-CAK Automotive Thermal Acoustic Insulation Charger-Coronet-Super Bee-Belevedere-GTX-Road Runner-Satellite Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1968-70 MOPAR B-Body Convertible Complete AcoustiShield Insulation Kit MOPARB 6870-CVAK Automotive Thermal Acoustic Insulation Charger-Coronet-Belevedere-GTX-Road Runner-Satellite

Cowl Kit Floor Kit

Body Panel Kit

Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1968-70 MOPAR B-Body Sedan Complete AcoustiShield Insulation Kit MOPARB 7076-SAK Automotive Thermal Acoustic Insulation Coronet-Belevedere Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit For 4-Door Sedans with upholstered door & panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- sided foam tape and Instructions. Easy to Kits are available for this Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1971-74 MOPAR B-Body Coupe Complete AcoustiShield Insulation Kit MOPARB 7174-CAK Automotive Thermal Acoustic Insulation Charger-Super Bee-Coronet-GTX-Road Runner-Satellite-Sebring Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1971-74 MOPAR B-Body Convertible Complete AcoustiShield Insulation Kit MOPARB 7174-CVAK Automotive Thermal Acoustic Insulation Charger-Coronet-GTX-Road Runner-Satellite-Sebring Cowl Kit Floor Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1971-74 MOPAR B-Body Sedan Complete AcoustiShield Insulation Kit MOPARB 7174-SAK Automotive Thermal Acoustic Insulation Coronet-Satellite-Sebring Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit For 4-Door Sedans with upholstered door & panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- sided foam tape and Instructions. Easy to Kits are available for this Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1975-77 MOPAR B-Body Coupe Complete AcoustiShield Insulation Kit MOPARB 7577-CAK Automotive Thermal Acoustic Insulation Charger-Coronet-Road Runner-Satellite Cowl Kit Floor Kit Roof Kit

Body Panel Kit Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1975-77 MOPAR B-Body Convertible Complete AcoustiShield Insulation Kit MOPARB 7577-CVAK Automotive Thermal Acoustic Insulation Charger-Coronet-Road Runner-Satellite Cowl Kit Floor Kit

Body Panel Kit Trunk Kit

The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1975-77 MOPAR B-Body Sedan Complete AcoustiShield Insulation Kit MOPARB 7577-SAK Automotive Thermal Acoustic Insulation Coronet Cowl Kit Floor Kit Roof Kit

Body Panel Kit Trunk Kit

ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit For 4-Door Sedans with upholstered door & panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- sided foam tape and Instructions. Easy to Kits are available for this Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1965-68 MOPAR C-Body Coupe Complete AcoustiShield Insulation Kit MOPARC 6568-CAK Automotive Thermal Acoustic Insulation Chrysler 300-New Yorker-Newport--Monaco-Polara-Fury-Sport Fury Cowl Kit Floor Kit Roof Kit

Body Panel Kit Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1965-68 MOPAR C-Body Convertible Complete AcoustiShield Insulation Kit MOPARC 6568-CVAK Automotive Thermal Acoustic Insulation Chrysler 300-New Yorker-Newport-Polara-Fury-Sport Fury Cowl Kit Floor Kit

Body Panel Kit Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1965-68 MOPAR C-Body Sedan Complete AcoustiShield Insulation Kit MOPARC 6568-SAK Automotive Thermal Acoustic Insulation Chrysler 300-New Yorker-Newport-Custom 880-Monaco-Polara-Fury Cowl Kit Floor Kit Roof Kit

Body Panel Kit Trunk Kit

ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit For 4-Door Sedans with upholstered door & panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- sided foam tape and Instructions. Easy to Kits are available for this Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1970-74 MOPAR E-Body Coupe Complete AcoustiShield Insulation Kit MOPARE 7074-CAK Automotive Thermal Acoustic Insulation Barracuda-’cuda-Challenger Cowl Kit Floor Kit Roof Kit

Body Panel Kit Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. 1970-74 MOPAR E-Body Convertible Complete AcoustiShield Insulation Kit MOPARE 7074-CVAK Automotive Thermal Acoustic Insulation Barracuda-’cuda-Challenger Cowl Kit Floor Kit

Body Panel Kit Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks & with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape Kits are available for this and Instructions. Easy to Install. vehicle. The Firewall Insulator for this vehicle is also available. Please see our Firewall Insulator Section in this catalog. Quiet Ride Firewall Insulators and Headliners are “Concours Quality”

Quiet Ride Firewall Insulator products manufactured with one of our “period correct” materials that presents a high quality, fresh look to any truck interior. Each of these firewall insulator designs are an exact reproduction of an “out of the car/truck” original, provided to us by one of our customers. They are vacuum form molded to the original contours. All firewalls include “Period Correct Insulation” and are pre-cut and ready to install with factory mounting holes punched. They will not chip or peel,or show scuff marks, absorb moisture, or expand and contract with temperature extremes. These materials can be painted with popular upholstery spray paints and wipe clean with a damp cloth.

Leather Grain Texture Ford Cars and trucks, 1948 to 1979.

All of our Firewall Insulator Products Can be ordered for Restoration Applications (factory Holes) or for Restomod Applications (No Holes). 1960-76 MOPAR “A” Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970’s MOPAR cars was commonly shared across Dodge and Plymouth “A” Body production lines. Dodge---Dart Demon and Lancer Plymouth---Barracuda, Duster, Scamp and Valiant Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to detrmine which Insulator panel most closely matches the basic hole configuration on your vehicle.

MOPAR-A 6364-HC MOPAR-A 6062-HC 1963-64 MOPAR-A Body Car Firewall Insulator Panel w/ 1960-62 MOPAR -A Body Car Firewall Insulator Panel w/ Heater Dodge and Plymouth Heater Dodge and Plymouth Original Factory Style firewall insulator for the 1963-64 Original Factory Style firewall insulator for the 1960-62 Dodge and Plymouth cars w/heater. Leather Grain Cover- Dodge and Plymouth cars. Molded to fit the stock engine -ready to install with insulation. setback hump. Leather Grain Cover--ready to install with insulation.

MOPAR-A 6366-AC MOPAR-A 6566-HC 1963-66 MOPAR-A Body Car Firewall Insulator Panel w/ 1965-66 MOPAR-A Body Car Firewall Insulator Panel w/ Factory A/C. Dodge and Plymouth Heater Dodge and Plymouth Original Factory Style firewall insulator for the 1963-66 Original Factory Style firewall insulator for the 1965-66 Dodge and Plymouth cars with Factory A/C. Leather Grain Dodge and Plymouth cars w/heater. Leather Grain Cover- Cover--ready to install with insulation. -ready to install with insulation.

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1960-76 MOPAR “A” Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970’s MOPAR cars was commonly shared across Dodge and Plymouth “A” Body production lines. Dart Demon and Lancer Barracuda, Duster, Scamp and Valiant

MOPAR-A 7076-HC 1970-76 MOPAR -A Body Car Firewall Insulator Panel w/Heater Dodge and Plymouth Original Factory Style firewall insulator for the 1970-76 MOPAR-A 6769-AC Dodge and Plymouth cars w/Heater. Leather Grain Cover- 1967-69 MOPAR-A Body Car Firewall Insulator Panel -ready to install with insulation. w/Factory A/C Dodge and Plymouth Original Factory Style firewall insulator for the 1967-69 Dodge and Plymouth cars w/Factory A/C. Leather Grain Cover--ready to install with insulation.

MOPAR-A 6769-HC MOPAR-A 7076-AC 1967-69 MOPAR -A Body Car Firewall Insulator Panel w/ 1970-76 MOPAR -A Body Car Firewall Insulator Panel w/ Heater Dodge and Plymouth Factory A/C Dodge and Plymouth Original Factory Style firewall insulator for the 1967-69 Original Factory Style firewall insulator for the 1970-76 Dodge and Plymouth cars w/Heater. Leather Grain Cover- Dodge and Plymouth cars w/Factory A/C. Leather Grain -ready to install with insulation. Cover--ready to install with insulation.

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1960-70 MOPAR “B” Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970’s MOPAR cars was commonly shared across Dodge and Plymouth “B” Body production lines. Charger, Coronet, Dart, Magnum, Monaco and Polara Belvedere, Fury, GTX, Road Runner, Satellite and Savoy Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to dtermine which Insulator panel matches the basic hole configuration on your vehicle.

MOPAR-B 6062-HC MOPAR-B 6365-HVAC 1960-62 MOPAR-B Body Car Firewall Insulator Panel w/ 1963-65 MOPAR-B Body Car Firewall Insulator Panel w/ Heater Dodge and Plymouth Factory Heater or A/C. Dodge and Plymouth Original Factory Style firewall insulator for the 1960-62 Original Factory Style firewall insulator for the 1963-65 Dodge and Plymouth cars w/Heater. Leather Grain Cover- Dodge and Plymouth cars w/Heater or Factory A/C. Leather -ready to install with insulation. Grain Cover--ready to install with insulation.

MOPAR-B 6670-HC MOPAR-B 6670-AC 1966-70 MOPAR-B Body Car Firewall Insulator Panel w/ 1966-70 MOPAR-B Body Car Firewall Insulator Panel w/ Heater. Dodge and Plymouth Factory A/C. Dodge and Plymouth Original Factory Style firewall insulator for the 1966-70 Original Factory Style firewall insulator for the 1966-70 Dodge and Plymouth cars w/Heater. Leather Grain Cover- Dodge and Plymouth cars w/Factory A/C. Leather Grain -ready to install with insulation. Cover--ready to install with insulation.

MOPAR-B 6670-CPKG 1966-70 MOPAR-B Body Car Coupe Package Tray. Dodge and Plymouth Original Factory Style Coupe Package Tray for the 1966-70 Dodge and Plymouth cars. Leather Grain Cover--ready to install with insulation.

MOPAR-B 7174-AC MOPAR-B 7174-HC 1971-74 MOPAR-B Body Car Firewall Insulator Panel w/ 1971-74 MOPAR-B Body Car Firewall Insulator Panel w/ Factory A/C. Dodge and Plymouth Heater. Dodge and Plymouth Original Factory Style firewall insulator for the 1971-74 Original Factory Style firewall insulator for the 1971-74 Dodge and Plymouth cars w/Factory A/C. Leather Grain Dodge and Plymouth cars w/Heater. Leather Grain Cover- Cover--ready to install with insulation. -ready to install with insulation.

MOPAR-B 7174-CPKG 1971-74 MOPAR-B Body Car Coupe Package Tray. Dodge and Plymouth Original Factory Style packaage tray for the 1971-74 Dodge and Plymouth cars. Leather Grain Cover--ready to install with insulation.

MOPAR-B 7174-CSD 1971-74 MOPAR-B Body Car Coupe Seat Divider. Dodge and Plymouth Original Factory Style seat divider for the 1971-74 Dodge and Plymouth cars. Leather Grain Cover--ready to install with insulation.

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1965-72 MOPAR “C” Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970’s MOPAR cars was commonly shared across Chrysler, Dodge and Plymouth “C” Body production lines.

Imperial, New Yorker, Newport, 300 and Town and Country Monaco, Polara and 880 Fury, Gran Fury and VIP Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to detrmine which Insulator panel matches the basic hole configuration on your vehicle.

MOPAR-C 6568-HC MOPAR-C 6568-AC 1965-68 MOPAR-C Body Car Firewall Insulator Panel w/ 1965-68 MOPAR-C Body Car Firewall Insulator Panel w/ Heater. Chrysler, Dodge and Plymouth Factory A/C. Chrysler, Dodge and Plymouth Original Factory Style firewall insulator for the 1965-68 Original Factory Style firewall insulator for the 1965-68 Chrysler, Dodge and Plymouth cars w/Heater. Leather Chrysler, Dodge and Plymouth cars w/Factory A/C. Leather Grain Cover--ready to install with insulation. Grain Cover--ready to install with insulation.

MOPAR-C 6568-CSD MOPAR-C 7172-CPKG 1965-68 MOPAR-C Body Car Coupe Seat Divider. Chrysler, 1965-68 MOPAR-C Body Car Coupe Package Tray with Dodge and Plymouth. Speaker Grills. Chrysler, Dodge and Plymouth. Original Factory Style Seat Divider for the 1965-68 Chrys- Original Factory Style Package Tray for the 1971-72 ler, Dodge and Plymouth cars. Leather Grain Cover--ready Chrysler, Dodge and Plymouth cars. Molded to fit the stock to install with insulation. Package Shelf. Leather Grain Cover--ready to install with insulation. With Speaker Grills.

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1970-74 MOPAR “E” Body Car Firewall Insulator Panels The Firewall bulkhead in 1970’s MOPAR cars was commonly shared across Dodge and Plymouth “E” Body production lines.

Challenger, Barracuda and ‘Cuda Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to detrmine which Insulator panel matches the basic hole configuration on your vehicle.

MOPAR-E 7074-AC MOPAR-E 7074-HC 1970-74 MOPAR-E Body Car Firewall Insulator Panel w/ 1970-74 MOPAR-E Body Car Firewall Insulator Panel w/ Factory A/C. Chrysler, Dodge and Plymouth Heater. Chrysler, Dodge and Plymouth Original Factory Style firewall insulator for the 1970-74 Original Factory Style firewall insulator for the 1970-74 Dodge and Plymouth cars w/Factory A/C. Leather Grain Dodge and Plymouth cars w/Heater. Leather Grain Cover- Cover--ready to install with insulation. -ready to install with insulation.

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). Automotive Thermal Acoustic Insulation

A Roof to Road Solution to Control Passenger Cabin Noise, Vibration and Heat TM AcoustiSHIELD Product Description AcoustiShield is a two-stage thermal acoustic automotive insulation product designed to control Noise, Vibration and Heat—the three major issues that affect passenger cabin comfort. Kits include pre-cut, ready-to-install Dynamat Xtreme® damper pads and HeatShield Barrier Insulation panels which are packaged separately for easy installation. Kits come with uniquely illustrated installation sheets, spray adhesive and seam tape. Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor, Doors and Body Panels, which includes the seat divider, package tray and rear wheel wells. The installation of a complete AcoustiShield kit typically will reduce passenger cabin noise by 12 to 17 decibels. To put this in perspective, a 10-decibel reduction is a 50 percent reduction in noise that the human ear can easily detect. Barrier insulation will reduce radiant heat by as much as 25 degrees. AcoustiShield is a Two-Stage Process Stage-One of the AcoustiShield process is the application of small pre-cut Dynamat Xtreme® damper pads and strips to auto body sheet metal to greatly reduce the vibration and noise produced by these panels from entering the passenger cabin.

Stage-Two of the AcoustiShield process is the application of pre-cut HeatShield Barrier Insulation panels to the auto body sheet metal to encapsulate any remaining vibration/noise and to thermally insulate the vehicle. ©2003-21 Quiet Ride Solutions LLC. “AcoustiSHIELD” --- “Quiet Ride Solutions” “AcoustiTRUNK”---”ShowBEDDER”---”AcousatiHOOD”are Registered Trade Marks of Quiet Ride Solutions LLC. Expanded NVH Reference Information: Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple directions--including internal and external air-borne noise, structure-borne noise as well as radiant heat. NVH factors to consider: •Engine NVH travels back from the front of the vehicle through the firewall and cowl. •Wheel well trunk and rear body panel NVH travels forward through the seat divider and package tray panels. •Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans. •Rumbling performance exhaust systems and transmission/drive line harmonics also rise through vehicle floor pans. •Direct heat from the sun penetrates the roof of the vehicle.

All of these influences “Apex” in the middle of the passenger cabin at ear level. Add the noise produced by the sound system; the air rushing through the vents from the HVAC system; and a normal conversation builds into a “shouting match” between the driver and passenger to overcome the “harmonic drone” of vehicle mechanics. AcoustiShield Photo Gallery

Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation.

Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation. Typical Floor Panel Sound Dampening and Thermal Barrier Insulation.

Typical Roof Panel Sound Dampening and Thermal Barrier Insulation.

Typical Body Panel Sound Dampening and Thermal Barrier Insulation. Made Right---Fit Right---Look Right OEM Original Products

Firewall Insulator products are pre-cut and ready to install with standard OEM accessory and mounting holes punched for restoration applications. Each unit has period correct insulation. Firewall Insulators are also available without holes for aftermarket HVAC systems and ABS Leather Grain Material Street Rod and Custom installs.

“Ultra High Definition” Vinyl Rubber Street Rod Firewall Insulator Direct Sheetmetal Absolute Sheetmetal Quick Link

ABS “Chicken Track” Material Product Description— ABS “Leather Grain” Original Equipment Firewall Insulators

Production Period—GM and MOPAR: 1926 through 1976 Production Period—FOMOCO: 1949 through 1979 ABS Firewall Cover Leather Grain Material Most OEMs used a leather grained firewall cover on their cars and trucks from 1926 through 1965. Each insulator product is molded with ABS material and ready-to- install with factory stock accessory holes and mounting pin locations punched. Kits does not include mounting pins. Quiet Ride has an assortment Each insulator product is of “universal” mounting pin styles molded from an “out of the car” available as needed. original firewall for contour and accuracy. Mounting pins are not included but Year-Make-Model Specific. are available for separate purchase as needed.

Firewall Insulators can be ordered without holes for custom applications. Thermal Insulation Types Original Equipment Firewall Insulators •General Motors Cars and Trucks •Ford Cars and Trucks •MOPAR Cars and Trucks

Black Fiberglass Insulation Heat Shield Barrier Insulation Typically used in vehicles 1949 through 1977 Typically used in vehicles 1928-48 and •ABS Firewall Insulators Vinyl Rubber Firewalls 1964-present •Street Rods •Custom Firewalls

Concours Show Quality Authentically Correct---“Fit like a Glove”---Easy to Install

All QRS Products, Materials and Craftsmanship Meet or Exceed OEM Quality Standards

No customer has ever reported losing judged points on our firewall products. Firewall Insulators--A Historical Perspective The Firewall Insulator is the first line of defense against automotive Noise, Vibration and Heat that is generated in the engine bay of the vehicle. QRS manufactures more than 600 firewall products for antique, classic, custom and street rod cars and trucks. The company has developed these products based on “out of car” original insulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact reproductions of OEM products. Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil impregnated cardboard cover in combination with a number of insulation materials. In 1964 General Motors and Ford Motor Company began using a “spray-on” rubber material bonded to a thin layer of “shody” insulation. All of the company’s firewall products are vacuum form molded to fit the firewall and transmission contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System for accurate fitting. Each firewall cover is backed with period correct insulation which could include a black fiberglass or HeatShield barrier insulation. Firewall Colors and “Sheen” Just a word about the “look” of your old firewall in comparison to a new one--you may may note that the new firewall does not look the same as your original--because of the “sheen.” The firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean and sparkling fresh. With few exceptions, firewall insulators were black when they came from the factory. There were some exceptions in the General Motors product line from 1933 through 1941 in which the firewall insulators were a “mocha brown” color. The firewall color would typically match the color of your clutch, brake and accelerator pedal rubber pads.

1122 S. Wilson Way Ste. #1, Stockton CA, 95205 Order Line: 888-777-3410 Tech Line (209) 942-4777 Fax 877-720-2360

©2003-21 Quiet Ride Solutions LLC. “AcoustiSHIELD” --- “Quiet Ride Solutions” “AcoustiTRUNK”---”ShowBEDDER”---”AcousatiHOOD”are Registered Trade Marks of Quiet Ride Solutions LLC. Mounting Pins and Clips

American Cars and Trucks used a wide variety of mounting pins, clips, buttons and screws to attach the firewall insulator to the interior of the steel firewall bulkhead. Clean up and reuse your original mounting pins if you have them. We offer the following mounting pins and information based on what we have been able to find available.

UMPS-10 Universal Mounting Pins 20 If your original firewall mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a plastic “Christmas tree” type pin with a 1/2” button “head” that will fit most 5/16 inch holes. Kit includes 10 pins.

UWC-MPL-10 Universal Wire Cap Mounting Pin--Long 10 A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Long shank (1/2 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins.

UWC-MPS-10 Universal Wire Cap Mounting Pin--Short 10 A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Short shank (1/4 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins.

UPPS-20 Universal Upholstery Panel Pin Set 30 If your original upholstery panel mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a short-shank plastic “Christmas tree” type pin with a 1/2 inch “head” that will fit 5/16 inch holes. Kit includes 10 pins.

FORD 3541- Early Ford Firewall Mounting Pins--Long 3 MPL These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 3/4 inch in length. The Long pin works best in the 1935-41 cars and may be used on cars through the mid-fiftys.

FORD 3541- Early Ford Firewall Mounting Pin--Short 3 MPS These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 1/2 inch in length. The short pins work best for the 1942-48 Ford cars and 1940-47 Ford trucks and may be used on trucks through the mid-fiftys.

FORD RB-MP Late Model Ford Firewall Mounting Pins--Rubber Bullet Style 3 These all Rubber Bullet Style Ford mounting pins were used on FOMOCO products starting in 1969. These are an exact reproduction of the original.

GM 5500-MP GM Firewall Plastic Firewall Mounting Plugs 3 General Motors started using a plastic firewall mounting plug to attach the insulator to the steel firewall bulkhead in 1955 for trucks and 1957 for cars. These plugs are still used in many GM vehicles today.

SRMP-9 Street Rod Mounting Pin Kit 34 With this new mounting pin kit, you can smooth your firewall by welding closed the firewall mounting holes and install any of our insulator panels for that “smoothie look.” This kit will give you the option to place the firewall mounting pins where they will fit your application best. Be sure to order your firewall insulator “No Holes” when you place your order. Kit Includes 9 pinsets and instructions.

R-83-56 Early and Mid-Year 1932 Ford 14.95 Correct insulator panel to dash mounting screws for early and mid-year 1932 passenger car, wagon and sedan delivery. Per Ford Engineering release documents, the correct slotted flat head screws (1/4-20 x 1 3/16), locks, hex nuts and cup washers. Finished in black oxide. Kit includes 12 Sets (48 pieces.) Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com.

R-07-01 Ford Original Shoulder Bolts for mid-to-late 1932 through 1935 Cars/Trucks 5.95 Ford special slotted truss head shoulder screw, painted in Ford S-2 finish. Period correct insulator panel to dash Truss head/Shoulder mounting bolts for mid- to-late 1932-35 car, wagon and sedan delivery. Per Ford Engineering release documents. Kit includes one Shoulder screw, 1/4 lock and 1/4-20 hex nut. FYI: 12 required for 1932 Vehicles and 14 required for 1933-35 vehicles. Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com.