DOCSLIB.ORG

INSTALLATION INSTRUCTIONS for the Kodak ADAPTIVE PICTURE EXCHANGE (APEX) 26, 48, 74, and 122

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
INSTALLATION INSTRUCTIONS for the Kodak ADAPTIVE PICTURE EXCHANGE (APEX) 26, 48, 74, and 122 {InstallationInstructs}{Production}{KodakServiceSupport}{None} Publication No. II3337-2 10FEB09 INSTALLATION INSTRUCTIONS for the Kodak ADAPTIVE PICTURE EXCHANGE (APEX) 26, 48, 74, and 122 Important Qualified service personnel must install this equipment. 1 2 © EASTMAN KODAK COMPANY, 2009 KODAK SERVICE AND SUPPORT PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the subject matter gained by Eastman Kodak Company prior to publication. No patent license is granted by this information. Eastman Kodak Company reserves the right to change this information without notice, and makes no warranty, express or implied, with respect to this information. Kodak shall not be liable for any loss or damage, including consequential or special damages, resulting from any use of this information, even if loss or damage is caused by Kodak’s negligence or other fault. This equipment includes parts and assemblies sensitive to damage from electrostatic discharge. Use caution to prevent damage during all service procedures. Table of Contents Description Page Safety. .4 Configurations . 5 Installing the Hardware . 6 Kodak ADAPTIVE PICTURE EXCHANGE 26 . 6 Installing the Components . 6 Completing the Installation of the Hardware . 8 Kodak ADAPTIVE PICTURE EXCHANGE 48 . 9 Installing the Components . 9 Installing the FOUR TRAY SORTERS . 10 Completing the Installation of the Hardware . 11 Kodak ADAPTIVE PICTURE EXCHANGE 74 . 12 Installing the Standard Components . 12 Installing the Optional Components . 17 Installing the PRINTERS . 19 Installing the FOUR TRAY SORTERS . 21 Installing the SKIRTS and Optional BACK PANEL ORGANIZERS . 22 Completing the Installation of the Hardware . 22 Kodak ADAPTIVE PICTURE EXCHANGE 122 . 23 Installing the Standard Components . 23 Installing the Optional Components . 23 Installing the PRINTERS . 23 Installing the FOUR TRAY SORTERS . 23 Installing the Second MAIN CABINET . 23 Installing the SKIRTS and Optional BACK PANEL ORGANIZERS . 24 Completing the Installation of the Hardware . 24 Installing and Configuring the Software . 25 Configuring Standard Settings on the APEX . 25 Configuring the Network on the APEX . 27 Configuring the Optional Settings on the APEX. 28 Print Options. 28 Kodak PICTURE MOVIE DVD . 28 Retailer CD. 29 Kodak PICTURE CD . 29 Kodak PRINT AT STORE . 30 Kodak REMOTE BUSINESS MANAGER . 30 MINILAB. 31 Configuring the Network Settings on the KIOSKS . 32 Configuring the Kiosk Network on the KIOSKS . 32 Configuring the Software on the KIOSKS . 33 2 10FEB09 – II3337-2 Checking the Operation of the Equipment . 34 Checking the Operation of the Equipment . 34 Making a Backup on the APEX. 34 Making a Backup on the KIOSKS. 34 Connections . 35 II3337-2 – 10FEB09 3 INSTALLATION INSTRUCTIONS Section 1: Safety This information defines the safety and information icons used in this publication. Caution This icon is used for conditions that could cause injury to a person, or damage to the equipment or software data. ESD Possible damage from electrostatic discharge. This icon is used for conditions that could cause damage to the equipment. Electrostatic discharge (ESD) is a primary source of: • equipment failure • equipment repairs A person cannot detect an electrical charge of less than 3,500 V, but 30 V can cause damage to components in the equipment. Preventive Measures • Check for an ESD WARNING LABEL before doing any procedure with ESD-sensitive components. All sensitive components have graphic LABELS that frequently include instructions. Use all label instructions. • Wear a GROUNDING STRAP when you touch ESD-sensitive components. Check that the CLIP remains fastened to a ground that has a clean surface with no paint. • Repair components in an ESD-protection area or use a PORTABLE GROUNDING MAT. • When moving ESD-sensitive components from area to area, insert and transport the components in the special material made for the transport of these components. Important This icon is used for important information. Note This icon is used for additional information. 4 10FEB09 – II3337-2 Configurations Section 2: Configurations Use the table below to guide you to the correct sections of this document for the configuration you are installing. Do only the procedures that are required for installation. See the retailer installation instructions or your region’s project support documentation for details. APEX 26 APEX 48 1. Do “Kodak ADAPTIVE PICTURE EXCHANGE Do “Kodak ADAPTIVE PICTURE EXCHANGE 26” on Page 6 - Page 8. 48” on Page 9 - Page 11. 2. Do “Installing and Configuring the Software” on Do “Installing and Configuring the Software” on Page 25 - Page 33. Page 25 - Page 33. 3. Do “Checking the Operation of the Equipment” Do “Checking the Operation of the Equipment” on Page 34. on Page 34. APEX 74 APEX 122 1. “Kodak ADAPTIVE PICTURE EXCHANGE 74” “Kodak ADAPTIVE PICTURE EXCHANGE on Page 12 - Page 22. 122” on Page 23 - Page 24. 2. Do “Installing and Configuring the Software” on Do “Installing and Configuring the Software” on Page 25 - Page 33. Page 25 - Page 33. 3. Do “Checking the Operation of the Equipment” Do “Checking the Operation of the Equipment” on Page 34. on Page 34. II3337-2 – 10FEB09 5 INSTALLATION INSTRUCTIONS Section 3: Installing the Hardware Kodak ADAPTIVE PICTURE EXCHANGE 26 Installing the Components [1] Loosen the KNOB on the right side STABILIZER FOOT. [2] Rotate the STABILIZER FOOT out. [3] Lower the STABILIZER FOOT so that it is level with the floor. [4] Tighten the KNOB. [5] Do Step 1 - Step 4 with the left side STABILIZER FOOT. KNOB STABILIZER FOOT A171_1058GCA A171_1058GC [6] Connect the 4 USB EXTENSION CABLES to the 4 USB EXTENSION USB PORTS on the front of the PROCESSOR. CABLES [7] Route the 4 USB EXTENSION CABLES to the back of the PROCESSOR. PROCESSOR USB PORTS A171_1108ACA A171_1108AC 6 10FEB09 – II3337-2 Installing the Hardware PROCESSOR MONITOR KEYBOARD CARD READER MOUSE LABEL PRINTER FILM SCANNER A171_1066GCA A171_1066GC [8] Install the components on the APEX 26. • PROCESSOR • MONITOR • KEYBOARD • MOUSE • CARD READER • PRINT SCANNER • FILM SCANNER - optional • LABEL PRINTER - optional [9] Install the PRINTERS to the APEX 26. [10] Connect the components and PRINTERS to the PROCESSOR. See “Connections” on Page 35. Important You must connect the POWER CORD for the F-135 FILM SCANNER to a power source outside the APEX. [11] Connect the POWER CORDS for the components to the POWER DISTRIBUTION BOX. [12] Install the SKIRTS (not shown) for the APEX 26. [13] Install the optional BACK PANEL ORGANIZER for the APEX 26. See the INSTALLATION INSTRUCTIONS included with the BACK PANEL ORGANIZER. II3337-2 – 10FEB09 7 INSTALLATION INSTRUCTIONS Completing the Installation of the Hardware PROCESSOR [1] Install the COVER for the PROCESSOR. COVER [2] Connect the NETWORK CABLE for the APEX to: • APEX • main network Caution Dangerous Voltage PROCESSOR [3] Connect the POWER CORDS from the CABINETS to the main power. [4] Turn on the main power switches for the CABINETS. A171_1067ACA [5] Load paper and ribbon into the PRINTERS. See A171_1067AC the User’s Guide. [6] Load labels into the LABEL PRINTER. See the User’s Guide. [7] Wait for the PRINTERS to display “Ready”. [8] Check that the lights on the FILM SCANNER illuminate green only. Note All of the lights on the FILM SCANNER might not be illuminated. [9] Advance to “Installing and Configuring the Software” on Page 25. 8 10FEB09 – II3337-2 Installing the Hardware Kodak ADAPTIVE PICTURE EXCHANGE 48 Installing the Components [1] Connect the 4 USB EXTENSION CABLES to the 4 USB EXTENSION USB PORTS on the front of the PROCESSOR. CABLES [2] Route the 4 USB EXTENSION CABLES to the back of the PROCESSOR. PROCESSOR USB PORTS A171_1108ACA A171_1108AC MONITOR [3] Install the components on the APEX 48. FILM CARD • PROCESSOR SCANNER READER KEYBOARD • MONITOR • KEYBOARD MOUSE • MOUSE • CARD READER • PRINT SCANNER • FILM SCANNER - optional • LABEL PRINTER - optional [4] Install the PRINTERS to the APEX 48. [5] Connect the components and PRINTERS to the PROCESSOR. See “Connections” on Page 35. Important You must connect the POWER CORD for the F-135 PROCESSOR FILM SCANNER to the power source outside the LABEL APEX. PRINTER A171_1063GCA [6] Connect the POWER CORDS for the components A171_1063GC to the POWER DISTRIBUTION BOX. [7] Install the SKIRTS (not shown) for the APEX 48. [8] Install the optional BACK PANEL ORGANIZER for the APEX 48. See the INSTALLATION INSTRUCTIONS for the BACK PANEL ORGANIZER. II3337-2 – 10FEB09 9 INSTALLATION INSTRUCTIONS Installing the FOUR TRAY SORTERS [1] Install the bottom FOUR TRAY SORTER. (a) Remove the 2 THUMBSCREWS from the DATA CABLE CABINET. (b) Use the 2 pins to position the FOUR TRAY SORTER. POWER (c) Install the 2 THUMBSCREWS. CABLE (d) Connect to the PPAC BOARD: • DATA CABLE • POWER CABLE FOUR TRAY SORTER A171_1039GCA A171_1039GC 2 THUMBSCREWS [2] Install the top FOUR TRAY SORTER. (a) Remove the 2 THUMBSCREWS from the CABINET. DATA CABLE (b) Use the 2 pins to position the FOUR TRAY SORTER. (c) Install the 2 THUMBSCREWS. (d) Connect to the PPAC BOARD: • DATA CABLE • POWER CABLE POWER CABLE FOUR TRAY SORTER A171_1040GCA 2 THUMBSCREWS A171_1040GC 10 10FEB09 – II3337-2 Installing the Hardware Completing the Installation of the Hardware PROCESSOR [1] Install the COVER for the PROCESSOR. COVER [2] Connect the NETWORK CABLE for the APEX to: • APEX • main network Caution Dangerous Voltage PROCESSOR [3] Connect the POWER CORDS from the CABINETS to the main power. [4] Turn on the main power switches for the CABINETS. A171_1067ACA [5] Load paper and ribbon into the PRINTERS. See A171_1067AC the User’s Guide. [6] Load labels into the LABEL PRINTER. See the User’s Guide. [7] Wait for the PRINTERS to display “Ready”. [8] Check that the lights on the FILM SCANNER illuminate green only. Note All of the lights on the FILM SCANNER might not be illuminated. [9] Advance to “Installing and Configuring the Software” on Page 25. II3337-2 – 10FEB09 11 INSTALLATION INSTRUCTIONS Kodak ADAPTIVE PICTURE EXCHANGE 74 Installing the Standard Components Installing the PROCESSOR [1] Loosen the KNOB on the right side STABILIZER FOOT.
Load more

Recommended publications
  • KODAK EASYSHARE TOUCH Camera / M5370
    KODAK EASYSHARE TOUCH Camera / M5370 Extended user guide www.kodak.com Help: www.kodak.com/go/m5370support Tutorials: www.kodak.com/go/m5370demos Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2011 All screen images are simulated. Kodak, EasyShare Touch, Ektachrome, Kodachrome, Kodacolor, Max, Perfect Touch, Pulse, T-Max, and Tri-X are trademarks of Eastman Kodak Company. 4H8631_en Product features Quick start 1 Load the battery. 2 Charge until the light stops blinking. 3 Set language, date/time. 4 Take pictures, videos. 5 Install software, then share. Keep learning! Take and share your best pictures, videos! www.kodak.com/go/support i Product features Front, top view AF Assist/ Self-timer/ Flash Video light Lens Power Power/Battery Charging light Shutter button (for pictures) Zoom Record Video ii www.kodak.com/go/support Side, bottom view LCD Tripod socket Speaker Micro USB/ AV Out Strap post Review MICROSD/SDHC Card (accessory) Share Slot for MICROSD/SDHC Card (accessory) Battery compartment www.kodak.com/go/support iii Touchscreen gestures Tap Swipe Drag or scroll (or tap and hold) (Drag and quickly release) (Pull down or push up) iv www.kodak.com/go/support Table of contents 1 1 Setting up your camera .........................................................................1 Loading the KLIC-7006 battery......................................................................1 Charging the battery .....................................................................................2 Turning on the camera ..................................................................................5
    [Show full text]
  • KODAK EASYSHARE Camera / M552
    KODAK EASYSHARE Camera / M552 Extended user guide www.kodak.com For help with your camera: www.kodak.com/go/M552support Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2011 All screen images are simulated. Kodak, EasyShare, and Pulse are trademarks of Eastman Kodak Company. 4H7336_en Product features Front view Record button (for videos) Shutter button (for pictures) Battery Charging light Power button Self-timer/Video light Lens Flash Speaker Microphone www.kodak.com/go/support i Product features Back view Display button: Switch between Tools View and Clean View Flash button Mode button: Choose a capture mode or effect Delete button Zoom button OK, USB port Strap post LCD Tripod Review button: Review, socket edit, or tag pictures and videos; change settings Share button: Share pictures and videos SD/SDHC card SD/SDHC Card slot (optional accessory) Battery compartment ii www.kodak.com/go/support Table of contents 1 1 Setting up your camera .........................................................................1 Attaching the strap .......................................................................................1 Loading the KLIC-7006 battery......................................................................1 Charging the battery .....................................................................................2 Turning on the camera ..................................................................................5 Setting the language and date/time...............................................................5
    [Show full text]
  • Cognition: the Limit to Organization Change; a Case Study of Eastman Kodak
    COGNITION: THE LIMIT TO ORGANIZATION CHANGE; A CASE STUDY OF EASTMAN KODAK A THESIS Presented to The Faculty of the Department of Economics and Business The Colorado College In Partial Fulfillment of the Requirements for the Degree Bachelor of Arts By Noah Simon April 2011 COGNITION: THE LIMIT TO ORGANIZATION CHANGE; A CASE STUDY OF EASTMAN KODAK Noah Simon April 2011 LAS: Leadership Abstract The following thesis examines an incumbent firm affected by change. It seeks to deepen the understanding of the dynamic capabilities model by proposing cognition and not previous resource deployment is the limit of change. Two similar companies, Eastman Kodak and Polaroid will be compared during the shift from film to digital photography to determine what separated the two companies. KEYWORDS: (Organizational cognition, dynamic capabilities, path dependency, cognition, perception) TABLE OF CONTENTS ABSTRACT ACKNOWLEDGEMENTS 1 INTRODUCTION 1 2 LITERATURE REVIEW 6 2.1 Dynamic Capabilities...................................................................................... 7 2.1.1 How does a company survive?.............................................................. 7 2.1.2 What are the effects of core competencies?.......................................... 8 2.1.3 How are established companies affected by change?........................... 9 2.2 The Cognitive Perspective.............................................................................. 10 2.2.1 What does a path dependency mean for the individual?....................... 10 2.2.2 What
    [Show full text]
  • Film Capture for Digitization
    2000 International Symposium on Silver2000 Halide International Technology Symposium on Silver Halide Technology Copyright 2000, IS&T Film Capture for Digitization Allan F. Sowinski, Lois A. Buitano, Steven G. Link, and Gary L. House Imaging Materials and Media, Research & Development Eastman Kodak Company Rochester, NY USA Abstract printing devices, including silver halide paper writers, inkjet printers, and thermal dye transfer printers, that will accept Digital minilab photofinishing is beginning to spread rapidly image data inputs from a variety of sources including digital in the market place, in part, as a means to provide access to still cameras, and film and paper scanners. When film network imaging services, and also to fulfill the printing scanning and digital writing have supplemented traditional needs of the growing base of consumer digital still cameras. optical photofinishing sufficiently, image-taking films When film scanning and digital writing have supplemented designed for optimal scan printing will be feasible. traditional optical photofinishing sufficiently, image-taking Design opportunities to improve silver halide image films designed for optimal scan-printing will be feasible. capture may be afforded as a result of these photofinishing Representative film digitization schemes are surveyed technology changes. Some features of silver halide capture in order to determine some of the optimal features of input may merit improvement or alteration in order for it to silver halide capture media. Key historical features of films remain a very attractive consumer and professional imaging designed for optical printing are considered with respect to technology. In addition, electronic image processing may this new image-printing paradigm. One example of an allow new chemical or emulsion technologies in film system enabled new film feature is recording the scene with design that were difficult to manage with the strict increased color accuracy through theoretically possible requirements of trade optical printing compatibility.
    [Show full text]
  • Using Kodak Chemicals in Minilabs
    USING KODAK CHEMICALS IN MINILABS This publication is written specifically for minilab operators. It provides the most commonly needed technical information about film and paper processes for minilabs. Using KODAK FLEXICOLOR Chemicals and KODAK EKTACOLOR Chemicals in your minilab ensures that your film and paper processes will provide optimum results with the least possible environmental impact. This manual contains information on the film processing cycles recommended for KODAK GOLD, ULTRA MAX, ADVANTiX, and KODAK PROFESSIONAL Films. Also, this manual contains information on paper processing cycles for KODAK EDGE and ROYAL Papers. It is divided into four sections: • Chemicals and Chemical Handling • Processing Cycles for KODAK Chemicals • Process Monitoring • Troubleshooting Processes C-41 and RA-4 Note: If you are using KODAK SM Chemicals, see KODAK Publication No. Z-101, Using KODAK SM Chemicals in SM Minilabs. If you are using a KODAK Minilab System 88 or 89, a KODAK PROFESSIONAL RP 30 Laser Printer, a KIS DKS minilab system, a Fuji Frontier, or a Noritsu printer/processor designed for Process CP-48 or CP49E, you will find technical information on using KODAK Chemicals in those systems at www.kodak.com/go/photochemicals under the “Technical Publications” tab. ©Eastman Kodak Company, 2011 1 CHEMICALS AND CHEMICAL HANDLING High-quality customer orders begin with proper EFFECTS OF PROCESSING SOLUTIONS chemical handling and your choice of chemicals. Each solution affects the film or paper differently. Chemical handling includes how you store and mix Understanding the function of each solution can help you chemicals and your attention to chemical safety. diagnose processing problems. This section explains the following: Developer The developer chemically reduces the exposed silver •Chemical terms halide in the film or paper to form a metallic silver image.
    [Show full text]
  • Requirements for Printing Technologies in Digital Photo Finishing
    DPP2001: International Conference on Digital Production Printing and Industrial Applications Requirements for Printing Technologies in Digital Photo Finishing Tobias Damm Agfa Gevaert AG, Consumer Imaging, Lab Equipment D-81539 Munich, Germany Introduction The photo paper is designed to convert the negative film image into the positive photography. The paper Non-impact printing technologies have recently gained a gradation is about γ =2.5 in order to achieve an overall high level of image quality - this allows to produce gradation of the system of about γ =1.4. This results in: photo-like prints. • a high contrast of the prints, In the development of new printing technologies • an improved sharpness of details, and suitable for photo imaging applications, the question of • an enhancement of color saturation. the necessary image quality and the basic parameters affecting this quality, is of extreme importance. It is an advantage specific to the 2 step process – film Our investigation presented here addresses these and paper – that the images can still be improved after questions by defining the minimum technical exposing the film and before printing the photograph. requirements for high quality amateur photo printing. However, there are some shortcomings of the We derive data for visually perceived image quality conventional system which can be corrected when levels using prints produced on a high quality digital processing the images digitally between these two printing system. In this system scan data were generated production steps. from colour negative film, passed through an exactly Generally spoken, the photo paper defines the defined digital processing unit and outputted on a high possible range of parameters of the prints, but the actual quality colour laser recorder.
    [Show full text]
  • George Eastman Museum Annual Report 2018
    George Eastman Museum Annual Report 2018 Contents Exhibitions 2 Traveling Exhibitions 3 Film Series at the Dryden Theatre 4 Programs & Events 5 Online 7 Education 8 The L. Jeffrey Selznick School of Film Preservation 8 Photographic Preservation & Collections Management 8 Photography Workshops 9 Loans 10 Objects Loaned For Exhibitions 10 Film Screenings 15 Acquisitions 17 Gifts to the Collections 17 Photography 17 Moving Image 30 Technology 32 George Eastman Legacy 34 Richard and Ronay Menschel Library 48 Purchases for the Collections 48 Photography 48 Moving Image 49 Technology 49 George Eastman Legacy 49 Richard and Ronay Menschel Library 49 Conservation & Preservation 50 Conservation 50 Photography 50 Technology 52 George Eastman Legacy 52 Richard and Ronay Menschel Library 52 Preservation 53 Moving Image 53 Financial 54 Treasurer’s Report 54 Fundraising 56 Members 56 Corporate Members 58 Annual Campaign 59 Designated Giving 59 Planned Giving 61 Trustees, Advisors & Staff 62 Board of Trustees 62 George Eastman Museum Staff 63 George Eastman Museum, 900 East Avenue, Rochester, NY 14607 Exhibitions Exhibitions on view in the museum’s galleries during 2018. MAIN GALLERIES HISTORY OF PHOTOGRAPHY GALLERY Stories of Indian Cinema: A History of Photography Abandoned and Rescued Curated by Jamie M. Allen, associate curator, Department of Photography, and Todd Gustavson, exhibitions, Moving Image Department curator, Technology Collection NovemberCurated by 11,Jurij 2017–May Meden, curator 13, 2018 of film October 14, 2017–April 22, 2018 Nandita
    [Show full text]
  • 4 Minilab Processors
    4 MINILAB PROCESSORS There are many different types of minilab processors, and Table 4-1 Process C-41RA Cycle they are used under a variety of conditions. KODAK Time* Temperature Chemicals are designed to offer you choices to get the best Solution/Step min:sec °C (°F) results from your minilab regardless of its operation. FLEXICOLOR 37.8 ± 0.15 Developer 3:15 (100.0 ± 0.25) WHICH PROCESS CYCLE SHOULD YOU Replenisher LORR USE FOR YOUR PROCESSOR? FLEXICOLOR RA 38 ± 3 Bleach Replenisher 1:00 There are three basic processing cycles for processing Kodak (100 ± 5) color negative films in minilabs. You can use each of these NR† FLEXICOLOR RA cycles in minilabs that operate with or without wash water. 38 ± 3 Fixer and 1:30 to 2:00 The description of the three cycles will help you decide (100 ± 5) Replenisher‡ which matches your particular processor and processing FLEXICOLOR 38 ± 3 conditions. Final Rinse and 1:00 (100 ± 5) Do not process KODAK VERICOLOR Slide Film / Replenisher§ SO-279/5072 in washless minilab process cycles that use 40 to 68 Dry As needed FLEXICOLOR Final Rinse and Replenisher, i.e., Process (104 to 155) C-41B and Process C-41RA. Process these films in Process * Immersion time plus crossover time to the next tank. Bleach, fixer, and C-41 only using FLEXICOLOR Stabilizer III and final rinse times are minimums; longer times are acceptable. Replenisher. † Use only KODAK FLEXICOLOR RA Bleach Replenisher NR. Your equipment must provide the higher agitation required for this solution. Note: If you are using a minilab that uses KODAK SM ‡ Use only KODAK FLEXICOLOR RA Fixer and Replenisher.
    [Show full text]
  • KODAK MILESTONES 1879 - Eastman Invented an Emulsion-Coating Machine Which Enabled Him to Mass- Produce Photographic Dry Plates
    KODAK MILESTONES 1879 - Eastman invented an emulsion-coating machine which enabled him to mass- produce photographic dry plates. 1880 - Eastman began commercial production of dry plates in a rented loft of a building in Rochester, N.Y. 1881 - In January, Eastman and Henry A. Strong (a family friend and buggy-whip manufacturer) formed a partnership known as the Eastman Dry Plate Company. ♦ In September, Eastman quit his job as a bank clerk to devote his full time to the business. 1883 - The Eastman Dry Plate Company completed transfer of operations to a four- story building at what is now 343 State Street, Rochester, NY, the company's worldwide headquarters. 1884 - The business was changed from a partnership to a $200,000 corporation with 14 shareowners when the Eastman Dry Plate and Film Company was formed. ♦ EASTMAN Negative Paper was introduced. ♦ Eastman and William H. Walker, an associate, invented a roll holder for negative papers. 1885 - EASTMAN American Film was introduced - the first transparent photographic "film" as we know it today. ♦ The company opened a wholesale office in London, England. 1886 - George Eastman became one of the first American industrialists to employ a full- time research scientist to aid in the commercialization of a flexible, transparent film base. 1888 - The name "Kodak" was born and the KODAK camera was placed on the market, with the slogan, "You press the button - we do the rest." This was the birth of snapshot photography, as millions of amateur picture-takers know it today. 1889 - The first commercial transparent roll film, perfected by Eastman and his research chemist, was put on the market.
    [Show full text]
  • Automatic Image Processing in Digital Photoprinters
    IS&T©s 2000 PICS Conference IS&T©s 2000 PICS Conference Copyright 2000, IS&T Automatic Image Processing in Digital Photoprinters Tobias Damm Agfa Gevaert AG, Consumer Imaging, Lab Equipment D-81539 Munich, Germany Abstract In this paper the possibilities to remove shortcomings of the conventional photographic system as well as the expansion The conventional photographic system, based on AgX film of photographic production by digital means, focused on and paper will be briefly described. There are many issues to Minilab and wholesale finishing labs will be treated. In a be improved by digital image enhancement: at under exposed digital system the film is scanned with a high resolution, images the reduced contrast, color saturation and increased high dynamic film scanner. The data are processed and the grain; cross curving of film and paper; the problems due to corrected data are printed by a digital printer. The image files the limited contrast rendering ability of the paper with from digital cameras can also be fed into the processing unit respect to the total dynamic range and the loss of definition to produce prints and digital image files from film scans can at high saturated colors. be delivered. Automatic scratch and dust removal and new products with manipulated color saturation (sepia, black & white) are Conventional Photographic System examples for new possibilities due to digitization of the lab equipment. At the conventional photographic system the color negative The digital workflow is also a prerequisite for the pro- film and paper are well adjusted to each other to provide both duction of prints from digital cameras and to provide digital a good image quality and a high system robustness under files from scanned film.
    [Show full text]
  • FUJICOLOR CRYSTAL ARCHIVE DIGITAL PAPER SUPER TYPE CN Is a Silver Halide Color Paper Designed Exclusively for Digital Output. Wh
    1. Features and uses 2. Safelight FUJICOLOR CRYSTAL ARCHIVE DIGITAL PAPER Handle in total darkness. If safelight use is SUPER TYPE CN is a silver halide color paper designed unavoidable, observe the following precautions. exclusively for digital output. When used in conjunction Expose paper no longer than 1 minute to light with medium or large scale digital printer systems or the emitted through two Fuji Safelight Filter No. 103A FUJIFILM FRONTIER DIGITAL MINILAB, this paper (or Wratten Safelight Filter No. 13) in a 10 watt yields high image quality digital prints that make it tungsten lamp safelight located at least 1 meter from suitable for professional and commercial display uses. the work area Safelight filters fade with extended use and need Features regular checking. Replace when paper fogging is detected. High D-max Boasts a wide tonal range, Exposed paper is susceptible to safelight induced producing high image quality prints with a rich sensitivity increases in the exposed area. For this reason, exposed paper should be subjected as textural quality little as possible to safelight illumination. Purer Whiteness Clearer, more distinct print images and sharper text 3. Pre-processing paper handling / storage quality The higher the temperature and humidity, the more Vibrant Color Expanded color paper, whether unused, unexposed or exposed, is Reproduction reproduction range with susceptible to adverse changes in speed, color high color saturation, ideally balance, physical characteristics and other properties. suited to commercial
    [Show full text]
  • User's Guide for KODAK Picture Kiosk Plus Software, V9.X
    User's Guide for KODAK Picture Kiosk Plus Software, V9.X Including Information on the: KODAK Picture Kiosk Console 3/4/6/8/9 KODAK Picture Maker G4 Cabinet 17/120 KODAK Picture Maker G4 Cabinet 17/230 KODAK Picture Maker G4 Cabinet 24/120 KODAK Picture Maker G4 Cabinet 24/230 KODAK Picture Maker G4 Cabinet 36/120 KODAK Picture Maker G4 Cabinet 36/230 KODAK MOMENTS M1 Order Station Console 9 Contents Back Next Index Exit Table of Contents 1 Getting Started Showing the Language Selection Overview...................................................... 1-1 Screen........................................................ 2-4 Using This Guide ......................................... 1-2 Using Auto Shutdown and Startup............. 2-5 Before Using the Kiosk ................................ 1-2 Adjusting the Volume ................................. 2-6 Turning on the Kiosk.................................... 1-3 Setting the Time Zone................................ 2-7 Turning off the Kiosk.................................... 1-3 Setting the Date and Time ......................... 2-7 Navigating the Software .............................. 1-4 Setting the Retailer Store Information........ 2-8 Viewing the Shopping Cart .......................... 1-5 Configuring the Receipt Printer Feature .... 2-9 Using the Keyboard and Mouse .................. 1-6 Customizing the Receipt........................ 2-10 Connecting the keyboard and mouse ........ 1-6 Enabling Barcode Printing..................... 2-11 Disconnecting the keyboard and mouse.... 1-6 Sample Receipt ..................................... 2-13 KODAK Picture Kiosk G20 Configuration.... 1-7 Setting up Order Management................. 2-17 KODAK MOMENTS M1 Order Station Setting up the Local Area Network........... 2-18 Configuration ............................................... 1-8 Setting up the Kiosk Network................... 2-20 2 Setting up the Kiosk Sharing Devices with Other Kiosks ....... 2-21 Accessing the Setup Screen ....................... 2-1 Setting up the Host Kiosk .....................
    [Show full text]