2017 CRAFTS Auction Results

Total Page:16

File Type:pdf, Size:1020Kb

2017 CRAFTS Auction Results CRAFTS of NJ Auction April 8, 2017 Lot High Bid # (US$) Description 1 80.00 Unusual Large Signed Axe 2 20.00 Lot of 3 Stanley Block Planes 3 50.00 Boxlot of Tools: Stanley, 2 Drawknives, Box Scraper, etc. 4 30.00 Lot of 2 Planes: Large Jointer, Rounding 5 20.00 Lot of 2 Bench Planes, 1 by M. Nash 6 45.00 Small Tool Chest Filled w/ Tools 7 12.00 Lot of 2 Eric Sloane Books: ABC Book, Spirits of '76 8 10.00 Stanley No. 6 Fore Plane & A Sargent Plane 9 30.00 Currier's Fleshing Knife by A. Proctor, Exeter NH, ex-Courser Collection 10 20.00 Lot: 2 Crosscut Saws, 2 6' Bar Clamps, Peavey 11 50.00 Stanley No. 20 Square, SW (18") 12 45.00 Lot of 5 Large Augers 13 27.00 Lot: Wooden Rake, Eel Gig, Apple Picker 14 20.00 Lot: 2 Disston Saws, Miniature Anvil 15 50.00 Lot: 2 Hollow Augers in Old Pasteboard Box, 2 Stanley No. 88 Clapboard Siding Marker 16 15.00 Lot of 4 Tool Collector Books 17 25.00 Lot of 2 Large Leather Punches 18 40.00 Stanley No. 18 Plane 19 40.00 Lot: Brass Ship Bevel, Mahogany Bevel, Box Architect's Scales 20 30.00 Lot of 2 Adzes: Shipbuilder's, Curved 21 25.00 Boxlot of Misc. Tools: Hammers, Plumb Bobs, etc. 22 35.00 Lot of 3 Saws: 2 Buck, 1 Frame 23 45.00 Lot of 10 Molding Planes 24 55.00 Lot of Stanley Planes: No. 5, 6, 82 25 35.00 Lot of 4 Barrel Hoops 26 20.00 Lot: Farrier's Buttress, Hand Forged Brace, Millers Falls Ratchet Brace 27 35.00 Stanley No. 36 Level, Pat'd 1896 (6") 28 20.00 Tool Carrier w/ Tools 29 40.00 Lot of Marking Tools & Plumb Bobs 30 22.00 Craftsman Miter Box & Saw 31 15.00 Boxlot of 24 Various Bell System Tools 32 7.00 Bell System Lineman's Pole w/ Cope Hook, Pruning Saw & Loping Shear 33 50.00 Lot: Heller Cutting Hammer, 19th Century Onion Scoop 34 22.00 Lot: 14 Braces, Early Hack Saw, Wooden Saw 35 50.00 Lot of Planes: Stanley No. 4C, 102, 120, 220 & Other 36 32.00 Lot of 3 Stanley Rules: No. 68A, 36½, 18 CRAFTS of NJ Auction April 8, 2017 Lot High Bid # (US$) Description 37 50.00 Lot of 6 Misc Tools Incl. Dough Scraper, Buttress, etc. 38 12.00 Lot of 3 Bemis & Call Wrenches: 6, 8 & 12-inch 39 130.00 Nordlund Hudson Bay Axe (Philacon Die) 40 70.00 Delta Universal Wet or Dry Grinder 41 100.00 Carba-Tec Mini Lathe w/ 8 Chisels & Accessories 42 50.00 Delta Jig Saw 43 35.00 Tool Box 43" x 21-1/2" x 17-3/4" 44 100.00 Millers Falls No. 182 Brace, Pat. 2-18-90 45 45.00 Lot of 3 Rules: Lufkin, C-S, Belcher, Irwin Bit, Bevel 46 75.00 Lot of 10 Chisels by Various Makers 47 22.00 Lot of 2 Stanley No. 45 Combination Planes, Type 1 & 2 48 10.00 Iron Frame Jig Saw 49 50.00 Lot: Small Millers Falls Turning Saw, Fret Saw, etc. 50 50.00 Plated Sheffield Brace 51 15.00 Pair of Toted Tongue & Groove Planes 52 55.00 Lot of 13 Hollow & Round Planes 53 47.00 Cat Door Stop No. 1013, Dover Iron, Pat. 5/22/1900 54 80.00 Lot of 13 Hollow & Round Planes 55 40.00 Lot: Union No. 60 Scraper, Small Hand Vice, Burnisher, etc. 56 15.00 Bell System Axe 57 80.00 Lot of 6 Molding Planes 58 30.00 Large Cheese Cutter 59 30.00 Brass Trammel Points w/ Pencil Attachment 60 5.00 Belt Sander 6" x 48" 61 35.00 Lot of 3 Hand Drills Incl. Millers Falls 62 17.00 Lot of Slaters Tools 63 40.00 Wide Cove w/ Bead Plane by V. Russell 64 70.00 Applewood Astragal Plane by C.B. Coanes (9-1/8") 65 35.00 Lot of 5 Handsaws: Atkins, Disston & Sons, etc. 66 50.00 Lot of 3 Molding Planes by S. Dalpe 67 25.00 Tool Box, 40" x 22" x 18" w/ Tools 68 30.00 Stanley Miller's Patent No. 41, Type 9 (Incomplete) 69 110.00 Lot: 9 Spoon Bits, Adjustable Dowel Pointer 70 55.00 Cooper's Jointer Plane (66" Long) 71 25.00 Cooper's Croze & Howell 72 40.00 Cooper's Sun Plane & Croze CRAFTS of NJ Auction April 8, 2017 Lot High Bid # (US$) Description 73 35.00 Boxlot: 6 Shaves, Square, Scrapers, Saw 74 40.00 Lot: Stanley No. 22 Liberty Bell Plane, Molding Plane by H. Wetherall, Chatham 75 100.00 Stanley No. 20 Circular Plane 76 20.00 Large Tool Chest w/ 5 Drawers 77 5.00 Lot of 8 Braces, 3 Are English 78 20.00 Spiral Screwdriver by S.F. Bowser 79 25.00 Fairbanks 5 lb. Scale (Unusual Scoop, off on) 80 22.00 Fairbanks 4 lb. Scale, No Scoop 81 30.00 Set Large Screw Arm Tongue & Groove Planes by Union Factory 82 25.00 Plane by D.R. Barton, Rochester NY (1832) 83 37.00 Lot of 9 Wooden Planes 84 75.00 Lot: Stanley No. 67 Spokeshave, Stanley No. 66 Beader w/ 2 Fences & 7 Cutters 85 27.00 Level by Lyon & Clearman, Newark NJ, 1855-59 (30") 86 75.00 Lot of 11 Chisels by Various Makers 87 35.00 Stanley No. 5¼ Plane 88 10.00 Lot of 3 English Skew Rabbet Planes 89 15.00 Lot of 2 North Bros. (Phila.) Spiral Screwdrivers: No. 10 & 15 90 32.00 Lot of 4 Bar Clamps 91 40.00 Boxlot of Woodworking & Carpentry Books 92 17.00 Match Plane Set No. 5 by King & Compe, Hull UK 93 22.00 Lot of 2 Different Stanley No. 36 Levels 94 50.00 Boxwood Plow Plane by J. Denison (No Wedge or Iron) 95 25.00 Match Plane Set by Eastwood 96 65.00 Folding Handle Drawknife by Wilkinson 97 22.00 Lot of 3 Levels: Stanley No. 30, No. 3 (Type 1), Other 98 50.00 Lot: 2 Side Bead Planes, 1/2" Cove Plane 99 35.00 Lot: Record Router, Stanley No. 110, Smooth Plane 100 120.00 Nobles Patent Brace 101 35.00 Lot of 4 Planes: Jointer, Jack, Smooth, Plow 102 47.00 Stanley No. 90 Bullnose Rabbet Plane w/ SW Iron 103 70.00 Lot of 7 Ogee Molding Planes 104 20.00 Adjustable Tenon Cutter 105 90.00 Russell Jennings Spur Auger Bits (13) in Box 106 60.00 Lot of 12 Molding Planes Incl. N. Gere (AWP****); A. Smith, Rehoboth (AWP*****) CRAFTS of NJ Auction April 8, 2017 Lot High Bid # (US$) Description 107 45.00 Early Dividers by W.C. Wyon (14") 108 80.00 Fulton Combination Molding Plane 109 5.00 Lot of Molding Planes: Auburn, Colton, Brisco, etc. 110 30.00 Tensionmeter No. 2150 IOB 111 80.00 Plated Brace by J. Bee, Sheffield 112 90.00 Large Tool Chest w/ Tools 113 30.00 Lot: 4 Quilt Frame Clamps, Tremont Nail Co. Display, 2 Name Stamps, etc. 114 25.00 Lot of 3 Wood Levels: Stanley, C-S, Disston 115 80.00 Large Wood Tool Chest 116 40.00 Lot: Cooper's Hoop Driver & Puller, Stanley Victor Brace, Food Chopper 117 10.00 Match Set by Wm. Moss 118 30.00 Lot of NJ Planes: 2 A. Mockridge, 1 Mockridge & Francis 119 5.00 Lot of 2 English Braces 120 20.00 H. Chapin Union Factory No. 237 Plow Plane 121 35.00 Lot of 9 Gouges & Chisels Incl. Buck, Peugeot Freres, etc. 122 20.00 Lot of 7 Bead Planes 123 40.00 Lot: Sargent VBM Scraper, Low Angle Plane, Dividers 124 20.00 Lot: Spoke Pointer, 3 Fixed Size Hollow Augers 125 30.00 Stanley No. 46 Combination Plane, Type 2 126 60.00 Lot of 10 Hollow & Round Molding Planes 127 50.00 Lot of 2 Plow Planes: Young & McMaster, Auburn 128 50.00 Stanley No. 12 Scraper Plane 129 70.00 Millers Falls No. 1 Spokeshave, Pat'd 1884 130 17.00 Lot of Block Planes and Molding Planes 131 60.00 Stanley No. 45 Combination Plane, Type 1 132 60.00 Russell Jennings Auger Bit Set, 13 pcs. 133 120.00 Oak Machinist Tool Chest 134 95.00 Turf Axe Found on Cape Cod 135 32.00 Lot: 8 Hammers (1 Marked T. Elwell Pat.), Denglestock 136 25.00 Lot of 6 Smooth Planes 137 50.00 Miter Cutter by Perkins & Co., Grand Rapids, Pat'd 1891 138 15.00 Lot of 3 Plow Planes 139 25.00 Boxlot: Unique Pliers, Vice, Number Stamps 140 50.00 Lot of 4 Spokeshaves: Stanley No. 53 & 60, Millers Falls, Wooden 141 25.00 Lot of 8 Molding Planes 142 15.00 Lot: Small T Handle Auger, Reamer, Perfect Handle Tack Hammer by Glascock CRAFTS of NJ Auction April 8, 2017 Lot High Bid # (US$) Description 143 20.00 Stanley Planes No. 29 & 30 144 17.00 Lot of 6 Smooth Planes 145 20.00 Lot of Sargent Planes: No. 408 (w/ Brass Cap Insert), No. 418C 146 10.00 Boxlot of 55 Files 147 65.00 Lot of 6 Candy Molds Incl. Goose, Rabbit, etc. 148 30.00 Decto Scale No. 4 149 20.00 Lot: Set of Red Adjustable Dies, Threadwell Tap & Die Set 150 60.00 Stanley No.
Recommended publications
  • Other Top Reasons to Visit Hakone
    MAY 2016 Japan’s number one English language magazine Other Top Reasons to Visit Hakone ALSO: M83 Interview, Sake Beauty Secrets, Faces of Tokyo’s LGBT Community, Hiromi Miyake Lifts for Gold, Best New Restaurants 2 | MAY 2016 | TOKYO WEEKENDER 7 17 29 32 MAY 2016 guide radar 26 THE FLOWER GUY CULTURE ROUNDUP THIS MONTH’S HEAD TURNERS Nicolai Bergmann on his upcoming shows and the impact of his famed flower boxes 7 AREA GUIDE: EBISU 41 THE ART WORLD Must-see exhibitions including Ryan McGin- Already know the neighborhood? We’ve 28 JUNK ROCK ley’s nudes and Ville Andersson’s “silent” art thrown in a few new spots to explore We chat to M83 frontman Anthony Gon- zalez ahead of his Tokyo performance this 10 STYLE WISH LIST 43 MOVIES month Three films from Japanese distributor Gaga Spring fashion for in-between weather, star- that you don’t want to miss ring Miu Miu pumps and Gucci loafers 29 BEING LGBT IN JAPAN To celebrate Tokyo Rainbow Pride, we 12 TRENDS 44 AGENDA invited popular personalities to share their Escape with electro, join Tokyo’s wildest mat- Good news for global foodies: prepare to experiences suri, and be inspired at Design Festa Vol. 43 enjoy Greek, German, and British cuisine 32 BEAUTY 46 PEOPLE, PARTIES, PLACES The secrets of sake for beautiful skin, and Dewi and her dogs hit Yoyogi and Leo in-depth Andaz Tokyo’s brand-new spa menu COFFEE-BREAK READS DiCaprio comes to town 17 HAKONE TRAVEL SPECIAL 34 GIRL POWER 50 BACK IN THE DAY Our nine-page guide offers tips on what to Could Hiromi Miyake be Japan’s next This month in 1981: “Young Texan Becomes do, where to stay, and how to get around gold-winning weightlifter? Sumodom’s 1st Caucasian Tryout” TOKYO WEEKENDER | MAY 2016 | 3 THIS MONTH IN THE WEEKENDER Easier navigation Keep an eye out for MAY 2016 a new set of sections that let you, the MAY 2016 reader, have a clear set of what’s going where.
    [Show full text]
  • Hand Planes Are for Fine Woodworking
    GarrettWade White Paper Steel and Wooden Planes In this age of power-driven tools, it’s easy to forget how important hand planes are for fine woodworking. Not only can you usually do better and more careful work with a hand plane, but you can often work much more quickly, because of power tool set-up time. Skill at hand planing is one of the most important abilities of any woodworking craftsman. Experience with hand planes will help you understand exactly what a power tool is doing when you use it for a particular job; an important and subtle appreciation, if one is to achieve consistently good results with power tools. A hand plane is also a far more forgiving tool; experienced woodworkers know that care sacrificed for speed ruins more otherwise good work than anything else. General Tips Here are a few hints about using any plane. First, keep the blade as sharp as possible. Bench stones and honing guides are excellent for this purpose. Secondly, with rare exception, plane with the grain. Look at the side of the stock to see at a glance which way the grain runs. If you don’t work with the grain, you run the danger of catching the grain, lifting chips of wood, and producing a rough surface. Exceptions to this rule are discussed with the applicable plane. When planing end grain, push the plane in one direction to the middle of the board only, then repeat this process going in the other direction. This prevents splitting the board at the edge.
    [Show full text]
  • MARCH/APRIL 1984, No. 45, $3.50
    MARCH/APRIL 1984, No. 45, $3.50 • • POWERMATIC ROCKWELL. HEGNER. INCA. PORTER-CABLE. HITACHI. BLACK & DECKER.tjtrl �o ONLY BRATTON MACHINERY HAS THE BIG 4. .. �> <.....� ROCKWELL, POWERMATIC, HITACHI & MAKITA t3• • IN FLORIDA: .....tP 1-800-874-8160 1-800-342-2641 ROCKWELL'S NEW trl -------------- � Unifeeder Stock Feeder 00 r- -------------------- (FOB MemphiS, TN) trl �::> BM&S PRESENTS X-V ROUTERMATIC Increases productivity with a:: (Manufactured by North American Machinery Enterprises) less effort, feeds stock con­ trl tinuously from 20 to 90 FPM, � �Eo< up to 11\" thick, motor sup­ trl o ROCKWELL plied with reversing switch & ::tl o overload protection. adapts to • Il. Bandsaw 28-283 most table saws and wood 14" • shapers up to 3 h.p., econom­ I:..., with enclosed steel ically priced! o 00 stand, beltguard, List ...............$566, ::tl Il. ¥. hp single phase Create Distinctive Carving Instantly ............. SALE $475. o )1 motor & push bullon trl switch mounted and Z Fixed overhead router with X-V table wired in stand 00 t) list ........... $866. :s to allow for decorative carving or ......... trl �z profiling using a template. A pin SALE $669. Z 00 router cannot compete! (FOB Memphis, TN) (1 �Z Operates of a 1:1 ratio with a l'h h.p. CALL FOR MORE SPECIALS C!) router motor. Comes complete & ready a::5: � to run. Make your first carving within '"tl an hour. r--'--------------------------�00 �o BIESMEYER FENCE RETROFIT SPECIAL • • For PowermaticlRockwell Table Saws: FOB Tallahassee, FL SALE $2,995. 00 ......•............................•..........•..... 'tj L-___________________ � Model 26· .................................................... SALE $253. 000 � Model 38· .................................................... SALE $276,00 0 Model SO' SALE $299.
    [Show full text]
  • “Cool Tools, Jigs & Gadgets”
    Northwest Corner Woodworkers Association March 2017 General Meeting Tuesday, March 7th 7:00 PM Hillcrest Lodge 1717 South 13th Street Mount Vernon Take I-5 to Exit 226 (Kincaid Street Exit). Go East up the hill. This is Broadway Street. Continue on Broadway to South 13th Street. Turn right onto South 13th Street and go about 6 blocks. The park is on your right. Turn into the park. The parking lot is in front of the lodge. Coolest Jig Ever! Click! March Program “Cool Tools, Jigs & Gadgets” Who among us has made a handy shop jig over the past year or discovered a new woodworker’s handy gadget? Well, now is the time to take 1 to 5 minutes to show the rest of us what you spent your hard earned money on (or, even better, made). We’ve done this kind of meeting almost every year in the past, and there are always new tools, jigs & gadgets to see – anything that you think might be useful to other woodworkers! We like to see them all. If you bring one of your jigs, please bring a few copies of the plan that you used to make it. Remember – this is ‘participative’ – your opportunity to share your own ‘woodworking valuables’ with your other woodworking members. Drop Dave Strauss a note at [email protected] if you think you might participate so that he knows how hard he has to ‘beat the bushes’ for presenters. Last Meeting Notes NCWA General Meeting Notes February 7, 2017 President Dave Strauss convened the meeting at 7:00 p.m.
    [Show full text]
  • The Brandon Woodworkers Club
    OCTOBER 2018 THE BRANDON WOODWORKERS CLUB Treasury: PRESIDENT’S WORDS OF WISDOM Beginning Balance. $4019.71 Again I would like to thank all those that have helped Income with club projects and club business. The club could not 50/50 $ 26.00 exist without all of you. Wood $ 40.00 Dues $ REPORTS Total Income $66.00 Mike Sweet was our only visitor at the September Expenses meeting. Let’s hope we didn’t scare him off and he’ll Rent $ come back. Refreshments $ 15.00 Gift Card Show & Tell $ 25.00 Fairs: Name Tags. $ Misc $ Florida State Fair – still in need of a judge. Total Expenses $(40.00) Hillsborough County Fair – Margaret Thompson dropped Ending balance $4045.71 by to encourage people to enter. Entries can be made next month. She passed out information. It’s at the end Membership 49 of the newsletter if you are interested. New members. None TV Cabinet 50-50 Drawing We need to get busy on this Casandra Taylor $24.00 Show & Tell Drawing: Bryce Moseley $15.00 Daphne Mahagan $10.00 1 Toys: Bill Reasoner hosted a toy workshop Saturday, September 15. Daphne Mahagan and Ken Boyd joined Bill in making Jewelry boxes for the toy drive. The skill sets used were box joints on the router table, lap joints, and incorporating glass into a project. They made a total of six jewelry boxes for donation. A big thanks to Gene Petys for donating the wood. We now have a total of 109 toys made for this year’s drive. The last chance to turn in toys will be the November meeting.
    [Show full text]
  • Le “AFIN D'être EN PLEINE POSSESSION DE SES MOYENS”
    $6.00 US Le“AFIN D’ÊTREFORUM EN PLEINE POSSESSION DE SES MOYENS” VOLUME 34, #4 SPRING/PRINTEMPS- 2010 “Photo by Annette Paradis King” New Website: francoamericanarchives.org another pertinent website to check out - Franco-American Women’s Institute: http://www.fawi.net Le Forum This issue of Le Forum is dedicated in loving memory to Irène Simoneau. Le Centre Franco-Américain Ce numéro du “Forum” est dédié à la Université du Maine Orono, Maine 04469-5719 douce mémoire de Irène Simoneau, voir page 3... [email protected] Téléphone: 207-581-FROG (3764) Sommaire/Contents Télécopieur: 207-581-1455 Volume 34, Numéro 4 FALL/AUTOMNE Features Éditeur/Publisher Yvon A. Labbé Letters/Lettres...............................................................................9, 19-20 L’État du Maine....................................................................................8, 9 Rédactrice/Gérante/Managing Editor Lisa Desjardins Michaud L’État du Connecticut.......................................................................10-18 L’État du Massachusetts.........................................................................23 Mise en page/Layout Lisa Desjardins Michaud L’État du Minnesota.......................................................37, 38, 42, 47, 48 Books/Livres.................................................................................20, 36-38 Composition/Typesetting Robin Ouellette Music/Musique..................................................................................39-42 Lisa Michaud Artist/Artiste......................................................................................43-44
    [Show full text]
  • The Measurement of Vocabulary of High School Students : a Study of the Reliability of Existing Tests
    Fort Hays State University FHSU Scholars Repository Master's Theses Graduate School Summer 1939 The Measurement of Vocabulary of High School Students : A Study of The Reliability of Existing Tests George Wendell Kellogg Fort Hays Kansas State College Follow this and additional works at: https://scholars.fhsu.edu/theses Part of the English Language and Literature Commons Recommended Citation Kellogg, George Wendell, "The Measurement of Vocabulary of High School Students : A Study of The Reliability of Existing Tests" (1939). Master's Theses. 297. https://scholars.fhsu.edu/theses/297 This Thesis is brought to you for free and open access by the Graduate School at FHSU Scholars Repository. It has been accepted for inclusion in Master's Theses by an authorized administrator of FHSU Scholars Repository. THE MEASUREMENT OF VOCABULARY OF HIGH SCHOOL STUDENTS A study of the reliability of existing tests being A Thesis presented to the Graduate Faculty of the Fort Hays Kansas State College in partial fulfillment of the requirements for the degree of :Master of Science by Ge.o-r- 1 e, Wendell Kellogg, A. B. (Colgate University, 1929) Approved 1939 ... Chairman, Graduate --- -· - -L Council 40 TABLE OF CONTENTS INTRODUCTION ----------------------------------------------- l A. ANALYSIS OF THE PROBLEM ---------------------------- l 1. STATEMENT OF THE PROBLEM ------------------------ 1 2. DEFINITION OF TERMS ----------------------------- 1 3. 'WHAT EXISTING TESTS SH~V ------------------------ 1 4. HYP<YrHESIS -------------------------------------- 1 B. METH OD AND SC OPE ----------------------------------- 2 CHAPTER I. PREVIOUS VOCABULARY STUDIES--------------------- 3 ___________ ; ___________________________ _ A. KIRKPATRICK 3 B. DORAN ---------------------------------------------- 3 C. BONSER--------------------------------------------- 4 D. TERMAN--------------------------------------------- ·4 E . GERUCH ---------------------------------------------· 4 F. BRANDENBURG 5 G. NEHER ---------------------------------------------- 5 H.
    [Show full text]
  • · Arrett Hack
    · �ARRETT HACK Photographs by John.S. Sheldon The HANDPLANE Book The HANDPLANE Book GARRETT HACK Photographs by John S. Sheldon TheTauntonrn Press TauntonBOOKS & VIDEOS forfellow enthusiasts © 1999 by The Taunton Press, Inc. All rights reserved. Printed in the United States of America 10 9 8 7 6 5 4 3 2 1 The Handplane Book was originally published in hardcover © 1997 by The Taunton Press, Inc. The Taunton Press, Inc., 63 South Main Street, PO Box 5506, Newtown, CT 06470-5506 e-mail: [email protected] Distributed by Publishers Group West. Library of Congress Cataloging-in-Publication Data Hack, Garrett. The handplane book / Garrett Hack. p. cm. "A Fine woodworking book" - T.p. verso. Includes bibliographical references and index. ISBN 1-56158-155-0 hardcover ISBN 1-56158-317-0 softcover 1. Planes (Hand tools). 2. Woodwork. I. Title. TT186.H33 1997 684'.082 - dc21 97-7943 CIP About Your Safety Working wood is inherently dangerous. Using hand or power tools improperly or ignoring standard safety practices can lead to permanent injury or even death. Don't try to perform operations you learn about here (or elsewhere) unless you're certain they are safe for you. If something about an operation doesn't feel right, don't do it. Look for another way. We want you to enjoy the craft, so please keep safety foremost in your mind whenever you're in the shop. To Helen and Vinny who saw the possibilities, Ned who encouraged me, and Hope who has kept me tuned and planing true ACKNOWLEDGMENTS No one can hope to bring together a book Helen Albert, for her insights and Noel Perrin, for his insights about all like this without help.
    [Show full text]
  • 2016 St. Charles Antique Tool Auction November 19, 2016, 9:30 AM Lions Club 4835 Central School Road St
    Great Planes Trading Company Presents 2016 St. Charles Antique Tool Auction November 19, 2016, 9:30 AM Lions Club 4835 Central School Road St. Charles (St. Louis), MO 63304 (Preview Friday 2-6 PM, Saturday 7 to 9:30 AM) ______ 1 Stanley #45 combination plow plane with floral casting, nice nickel plating, comes with three main sections, both sets rods, all three depth stops, beading stop, wooden box with partial label containing 16 addition blades for a total of 17. A nearly complete plane in fine overall condition. ______ 2 Stanley #71 1/2 router plane, with 1/4-inch blade, two good knobs, very good overall. ______ 3 Stanley #8 iron jointer plane, Type 8, with good rosewood tote and knob, good arched Rule & Level logo blade, 70 percent japanning, very good overall. ______ 4 Fine late model Stanley #40 scrub plane with nice rosewood tote and knob, BB-logo blade. ______ 5 Stanley #7C iron jointer plane, Type 13, BB-logo blade, intact rosewood tote and tall knob, STANLEY lever cap, very good overall. ______ 6 Fixer upper Bedrock 608 iron jointer plane, missing the tote but all the mounting hardware for a new one is in place, nice 2-line BEDROCK lever cap, nice V-logo blade, nice rosewood tall knob, will easily to fine overall. ______ 7 Fixer upper Bedrock No. 607 jointer plane, good rosewood tote and short knob, 75 percent plus japanning, BB-logo blade, needs a lever cap to complete, very good. ______ 8 Stanley #112 iron scraper plane, nice Richardson Bros.
    [Show full text]
  • Eurolocarno Version 9
    OFFICE FOR HARMONIZATION IN THE INTERNAL MARKET (TRADE MARKS AND DESIGNS) DESIGNS DEPARTMENT EUROLOCARNO (9th Edition) 01/2009 List of Classes Class Indication of Products CLASS 1 Foodstuffs CLASS 2 Articles of Clothing and Haberdashery CLASS 3 Travel goods, cases, parasols and personal belongings, not elsewhere specified CLASS 4 Brushware CLASS 5 Textile piecegoods, artificial and natural sheet material CLASS 6 Furnishing CLASS 7 Household goods, not elsewhere specified CLASS 8 Tools and hardware CLASS 9 Packages and containers for the transport or handling of goods CLASS 11 Articles of adornment CLASS 12 Means of transport or hoisting CLASS 13 Equipment for production, distribution or transformation of electricity CLASS 14 Recording, communication or information retrieval equipment CLASS 15 Machines not elsewhere specified CLASS 16 Photographic, cinematographic and optical apparatus CLASS 17 Musical instruments CLASS 18 Printing and Office machinery CLASS 19 Stationery and office equipment, artists' and teaching materials CLASS 20 Sales and advertising equipment, signs CLASS 21 Games, toys, tents and sports goods CLASS 22 Arms, pyrotechnic articles, articles for hunting, fishing and pest killing CLASS 23 Fluid distribution equipment, sanitary, heating, ventilation and air- conditioning equipment, solid fuel CLASS 24 Medical and laboratory equipment CLASS 25 Building units and construction elements CLASS 26 Lighting apparatus CLASS 27 Tobacco and smokers' supplies CLASS 28 Pharmaceutical and cosmetic products, toilet articles and apparatus
    [Show full text]
  • Spring Antique Tool Auction March 30, 2013, 9:30 AM Harvester Lions Club 4835 Central School Road St
    2nd Annual Spring Antique Tool Auction March 30, 2013, 9:30 AM Harvester Lions Club 4835 Central School Road St. Charles (St. Louis), MO 63304 (preview Friday from 2 to 6 PM) 001._____ Stanley #8C 24-inch iron joiner plane, with nice Q-logo blade, nice rosewood tote and low knob, 60%+ japanning, very good overall. 002._____ Stanley #7 22-inch iron joiner plane with 90%+ japanning, nice SW logo blade, rosewood tote missing sliver from side, nice tall knob, very good overall. 003._____ Unusual 22-inch corrugated Chaplin's Patent iron joiner plane with very good Tower & Lyon blade, hard rubber tote, nice ebonized wooden knob, very good overall. 004._____ Stanley BEDROCK #607C 22-inch iron joiner plane, nice Q-logo blade, scuffed but intact rosewood tote, nice low long, corner of lever cap has small chip, very good overall. 005._____ Siegley Patent 21 1/2-inch No. 12 corrugated iron joiner plane, nice E. HAHN blade, complete and very good. 006._____ Fine Stanley #6C iron fore plane with 98%+ japanning, fine tote and knob, fine BB logo iron, fine overall. 007._____ Fine Stanley #5 1/2 jumbo jack plane with 98%+ japanning, fine tote and knob, fine BB logo iron, fine overall. 008._____ Fine Stanley #5C iron jack plane with 98%+ japanning, fine tote and knob, fine BB logo iron, fine overall. 009._____ Stanley #3 iron smooth plane, nice stained hardwood tote and knob, nice BB logo blade, has some light surface rust, will clean to very good. 010._____ Stanley #8C Type 11 iron jointer plane, fine rosewood tote and short knob, very good V-logo blade, very good overall.
    [Show full text]
  • 1Axe by L & IJ White $ 40.00 2Chain Wrench 4 Foot
    1 Axe by L & I.J. White $ 40.00 2 Chain Wrench 4 Foot Long $ 5.00 3 Bowlus Joint Drill, Springfield, Ohio $ 60.00 4 Coachmakers Router, Large H.F. Gouge & a Lg. D. R. Barton Chisel $ 35.00 5 Bench Mount Fence Post Auger $ 10.00 6 Millers Falls No. 51 Angle Brace Extension $ 35.00 7 Fellow or Turning Saw $ 20.00 8 Ship Caulking Mallet w/3 irons $ 60.00 9 Large Circular Glass Cutter by SOMMER & MACA $ 40.00 10 Parker Vise Pat. Dec 17, 1867 $ 40.00 11 Set of 7 Plow Plane Irons, Ohio Tool Co., in wood box $ 80.00 12 Early Picture Framers Miter Vise w/ H.F. Screws $ 25.00 13 Monster 18" Hand Forged Froe $ 55.00 14 Boxlot of Assorted Shooting Items $ 50.00 15 Sargent No. 600R Take Down Square $ 40.00 16 Take Down Framing Square $ 55.00 17 Foredom Flexible Shaft Tool w/accessories $ 140.00 18 Boxlot of Planes & Shaves $ 35.00 19 Set of 12 Irwin Brace Bits in Box $ 30.00 20 Lot of 9 Tape Measures $ 40.00 21 Lot of 5 Keen Kutter Tools $ 35.00 22 Lot of 2 Buck Bros. Crank Neck Gouges $ 55.00 23 Lot of 10 Bridge Builders Augers w/ handle $ 50.00 24 Blacksmith Leg Vise $ 75.00 25 Adze & Log Dog $ 10.00 26 Three Piece Ulmia Tool Set, Smooth Plane, Router, & Bullnose Planes $ 95.00 27 Lignum Vitae Mallet 3 5/8" face $ 35.00 28 Patternmakers Plane $ 50.00 29 Lot of 2 Sighting Levels, Traughton & Simms, London, U.S.
    [Show full text]